ML18243A167: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
| issue date = 08/29/2018 | | issue date = 08/29/2018 | ||
| title = R. E. Ginna Nuclear Power Plant - Response to Request for Additional Information - License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, Clarification of Rod Posit | | title = R. E. Ginna Nuclear Power Plant - Response to Request for Additional Information - License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, Clarification of Rod Posit | ||
| author name = Gudger D | | author name = Gudger D | ||
| author affiliation = Exelon Generation Co, LLC | | author affiliation = Exelon Generation Co, LLC | ||
| addressee name = | | addressee name = | ||
Line 17: | Line 17: | ||
=Text= | =Text= | ||
{{#Wiki_filter:Exelon Generation | {{#Wiki_filter:Exelon Generation© 200 Exelon Way Kennett Square. PA 19348 www.exeloncorp.com 10 CFR 50.90 August 29, 2018 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 R. E. Ginna Nuclear Power Plant Renewed Facility Operating License No. DPR-18 NRG Docket No. 50-244 | ||
© August 29, 2018 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 R. E. Ginna Nuclear Power Plant Renewed Facility Operating License No. DPR-18 NRG Docket No. 50-244 | |||
==Subject:== | ==Subject:== | ||
Response to Request for Additional Information | Response to Request for Additional Information - License Amendment Request: | ||
-License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements" | Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements" | ||
==References:== | ==References:== | ||
: 1. License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements," dated June 25, 2018 ( | : 1. License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements," dated June 25, 2018 (ML18176A327). | ||
: 2. E-mail from V. Sreenivas, Ph.D., C.P.M, NRG Licensing Project Manager, to Jessie Hodge, Exelon, "Ginna -TSTF-547 Adoption, Request for Additional Information (RAI), dated August 15, 2018 ( | : 2. E-mail from V. Sreenivas, Ph.D., C.P.M, NRG Licensing Project Manager, to Jessie Hodge, Exelon, "Ginna -TSTF-547 Adoption, Request for Additional Information (RAI), dated August 15, 2018 (ML18228A524). | ||
By letter dated June 25, 2018 (Reference 1 ), Exelon Generation Company, LLC (EGG) requested a change to the R. E. Ginna (Ginna) Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements. | By letter dated June 25, 2018 (Reference 1), Exelon Generation Company, LLC (EGG) requested a change to the R. E. Ginna (Ginna) Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements. | ||
By e-mail dated August 15, 2018, (Reference 2), NRG issued a Request for Additional Information. | By e-mail dated August 15, 2018, (Reference 2), NRG issued a Request for Additional Information. to this letter contains the NRC's RAI as documented in Reference 2 immediately followed by Exelon's response. As previously discussed with Mr. V. Sreenivas, Exelon requests approval of the proposed amendment by September 30, 2018. This will reduce Station vulnerability to unnecessary plant transients due to required shutdown actions if multiple rod position indications in a group become inoperable. Once approved, the amendment shall be implemented within 120 days. | ||
There are no commitments contained in this letter. | |||
As previously discussed with Mr. V. Sreenivas, Exelon requests approval of the proposed amendment by September 30, 2018. This will reduce Station vulnerability to unnecessary plant transients due to required shutdown actions if multiple rod position indications in a group become inoperable. | Should you have any questions concerning this letter, please contact Enrique Villar at (610) 765-5736. | ||
Once approved, the amendment shall be implemented within 120 days. There are no commitments contained in this letter. Should you have any questions concerning this letter, please contact Enrique Villar at (610) 765-5736. | |||
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August29,2018 Page 2 I declare under penalty of perjury that the foregoing is true and correct. Executed on the | U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August29,2018 Page 2 I declare under penalty of perjury that the foregoing is true and correct. Executed on the 291h of August 2018. | ||
& Regulatory Affairs Exelon Generation Company, LLC | Re;):~JT ~ )yv-- | ||
David T. Gudger Manager - Licensing & Regulatory Affairs Exelon Generation Company, LLC | |||
==Attachment:== | ==Attachment:== | ||
: 1) Response to Request for Additional Information cc: Regional Administrator, NRC Region I NRC Resident Inspector NRC Project Manager A. L. Peterson (NYSERDA) | : 1) Response to Request for Additional Information cc: Regional Administrator, NRC Region I NRC Resident Inspector NRC Project Manager A. L. Peterson (NYSERDA) | ||
Attachment 1 Response to Request for Additional Information License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements" U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page 1 REQUEST FOR ADDITIONAL INFORMATION REQUESTING LICENSE AMENEDMENT REQUEST TO ADOPT TSTF-547, "CLARIFICATION OF ROD POSITION REQUIREMENTS" EXELON GENERSATION COMPANY. LLC R. E. GINNA NUCLEAR POWER PLANT DOCKET NO. 50-244 By application dated June 25, 2018 (Agencywide Documents Access and management System (ADAMS) Accession No. | |||
Attachment 1 Response to Request for Additional Information License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements" | |||
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page 1 REQUEST FOR ADDITIONAL INFORMATION REQUESTING LICENSE AMENEDMENT REQUEST TO ADOPT TSTF-547, "CLARIFICATION OF ROD POSITION REQUIREMENTS" EXELON GENERSATION COMPANY. LLC R. E. GINNA NUCLEAR POWER PLANT DOCKET NO. 50-244 By application dated June 25, 2018 (Agencywide Documents Access and management System (ADAMS) Accession No. ML18176A327), Exelon Generation Company, LLC (the licensee) submitted a license amendment request (LAA) to revise the R. E. Ginna Nuclear Power Plant (Ginna) Technical Specifications (TSs) by adopting Technical Specifications Task Force (TSTF) change TSTF-547, "Clarification of Rod Position Requirements." The Reactor Systems Branch (SRXB) staff has determined that the following additional information is needed in order to complete its review. | |||
: 1. Condition A in LCO 3.1.5 and LCO 3.1.6 The proposed TS changes would add a new Condition A to limiting Condition for Operation (LCO) 3.1.5, "Shutdown Bank Insertion Limit", and LCO 3.1.6, "Control Bank Insertion Limits". | |||
The proposed Condition A in both LCOs is applicable when one bank is inserted s 8 steps beyond the insertion limit specified in the Core Operating Limits Report. The NRG staff states in its safety evaluation (ADAMS Accession No. ML15328A350) approving TSTF-547 that the bracketed number (16] should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3.1.4.2. | |||
Provide the plant specific justification for use of s 8 steps in Condition A in LCOs 3.1.5 and 3.1.6 in accordance with the NRC staff SE approving TSTF-547. | |||
Exelon Response: | Exelon Response: | ||
The proposed change to Ginna Station Technical Specifications (TS) Specification Requirement, SR 3.1.4.2 states: "Verify rod freedom of movement (trippability) by moving each rod not fully inserted in the core 2: B steps in either direction." The 8 steps is Ginna's specific minimum number of steps that rods must be moved to ensure correct performance of the SR 3.1.4.2. One step is equivalent to 0.625 inches A value of "s 8 steps" was selected as the number of allowable steps below the insertion limits specified in the proposed Condition A for LCO 3.1.5 and LCO 3.1.6. The selection of "s 8 steps" U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page2 for these LCOs is consistent with the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16] in Condition A should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." In evaluating the value of 8 steps, the following factors were considered: | The proposed change to Ginna Station Technical Specifications (TS) Specification Requirement, SR 3.1.4.2 states: | ||
"Verify rod freedom of movement (trippability) by moving each rod not fully inserted in the core 2: | |||
B steps in either direction." | |||
The 8 steps is Ginna's specific minimum number of steps that rods must be moved to ensure correct performance of the SR 3.1.4.2. One step is equivalent to 0.625 inches A value of "s 8 steps" was selected as the number of allowable steps below the insertion limits specified in the proposed Condition A for LCO 3.1.5 and LCO 3.1.6. The selection of "s 8 steps" | |||
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page2 for these LCOs is consistent with the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16] in Condition A should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." | |||
In evaluating the value of 8 steps, the following factors were considered: | |||
* Design of the Microprocessor Rod Position Indication (MRPI) System | * Design of the Microprocessor Rod Position Indication (MRPI) System | ||
* Impact on the intent of the TS 3.1.5 and TS 3.1.6 Design of the Microprocessor Rod Position Indication (MRPI) System The MRPI system provides a highly accurate indication of actual control rod position, but at a lower precision than the step counters. | * Impact on the intent of the TS 3.1.5 and TS 3.1.6 Design of the Microprocessor Rod Position Indication (MRPI) System The MRPI system provides a highly accurate indication of actual control rod position, but at a lower precision than the step counters. The system consists of one detector assembly with 1O coil pairs (coil stack) for each rod. The detectors are constructed with coils of wire spaced on 7.5-inch centers up the drive rod housing, corresponding to 12 steps of control rod movement. | ||
The system consists of one detector assembly with | |||
As the rod is withdrawn into the drive rod housing, it affects the inductance of the coils, creating a large difference in inductance between consecutive coils. A signal from each pair of detector coils is fed into the signal processing cards. Each signal processor independently monitors all rods and senses a rod bottom for any rod. The true rod position as converted from inductance of the coils is always within +/-8 steps of the indicated position (+/-6 steps due to the 12-step interval and +/-2 steps transition uncertainty due to errors arising from linearity, repeatability, long term drift, power source voltage, temperature variations, and coil sensitivity). | As the rod is withdrawn into the drive rod housing, it affects the inductance of the coils, creating a large difference in inductance between consecutive coils. A signal from each pair of detector coils is fed into the signal processing cards. Each signal processor independently monitors all rods and senses a rod bottom for any rod. The true rod position as converted from inductance of the coils is always within +/-8 steps of the indicated position (+/-6 steps due to the 12-step interval and +/-2 steps transition uncertainty due to errors arising from linearity, repeatability, long term drift, power source voltage, temperature variations, and coil sensitivity). | ||
Based on this design, each control rod position on the MRPI Cathode Ray Tube (CRT) on the Main Control Board is represented by a bar graph (blue background with yellow fill) and as a control rod is withdrawn, the yellow bar rises against the blue background in 12-step (+/-8 steps) increments. | Based on this design, each control rod position on the MRPI Cathode Ray Tube (CRT) on the Main Control Board is represented by a bar graph (blue background with yellow fill) and as a control rod is withdrawn, the yellow bar rises against the blue background in 12-step (+/-8 steps) increments. To verify rod position, a change of bar graph height must be observed; i.e.: the bank must be inserted a minimum of ~ 8 steps, as an insertion of less than 8 steps may not result in bar graph height to change. As noted above, the MRPI system is normally accurate to +/- | ||
To verify rod position, a change of bar graph height must be observed; i.e.: the bank must be inserted a minimum of 8 steps, as an insertion of less than 8 steps may not result in bar graph height to change. As noted above, the MRPI system is normally accurate to +/- 8 steps of rod position. | 8 steps of rod position. | ||
It is upon this basis and the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16} in Condition A should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." that 8 steps in Condition A in LCOs 3.1.5 and 3.1.6 is justified. | It is upon this basis and the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16} in Condition A should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." that 8 steps in Condition A in LCOs 3.1.5 and 3.1.6 is justified. | ||
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page3 Impact on the intent of the TS 3.1.5 and TS 3.1.6 The shutdown bank insertion limits (Alls) in Condition A of LCO 3.1.5 are established to ensure that a sufficient amount of negative reactivity is available to shut down the reactor and maintain the required shutdown margin (SOM). The current cycle RIL for shutdown bank is;;:: 220 steps. As an example, if the shutdown rods are parked at 223 steps, the plant specific procedure directs Operations to move Rods IN from 223 to 212 steps. MRPI transition is normally expected at 217 steps or within the acceptable transition band of 215-219 steps. A review of plant operating experience shows that Ginna station has not been challenged with meeting the acceptable transition band. Therefore, a combination of MRPI design and plant OE provide the basis for the selection of 8 steps as the minimum number of steps that Rods must be moved to ensure correct performance of verification of Rod freedom of movement as well as maintaining the intent of Condition A of LCO 3.1.5 and LCO 3.1.6. The limits on control banks sequence, overlap, and physical insertion, as defined in the COLA, must be maintained because they serve the function of preserving power distribution, ensuring that the SOM and ejected rod worth are maintained, and ensuring adequate negative reactivity insertion is available on trip. The overlap between control banks provides more uniform rates of reactivity insertion and withdrawal and is imposed to maintain acceptable power peaking during control bank motion. The proposed change to SR 3.1.4.2 ensures verification of freedom of the shutdown and control rods to move below the LCO limits. The minimum of 8 steps ensure satisfactory completion of SR 3.1 .4.2 while the rods are monitored and controlled during power operation to ensure that safety analyses assumptions for SOM, ejected rod worth, and power distribution power peaking are preserved. | |||
: 2. SR 3.1.4.2 The proposed Ginna SR 3.1.4.2 requires movement of control and shutdown rods a minimum of 8 steps in either direction. | U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page3 Impact on the intent of the TS 3.1.5 and TS 3.1.6 The shutdown bank insertion limits (Alls) in Condition A of LCO 3.1.5 are established to ensure that a sufficient amount of negative reactivity is available to shut down the reactor and maintain the required shutdown margin (SOM). The current cycle RIL for shutdown bank is;;:: 220 steps. | ||
The value of 8 steps required for the minimum rod movement is different from the value of | As an example, if the shutdown rods are parked at 223 steps, the plant specific procedure directs Operations to move Rods IN from 223 to 212 steps. MRPI transition is normally expected at 217 steps or within the acceptable transition band of 215-219 steps. A review of plant operating experience shows that Ginna station has not been challenged with meeting the acceptable transition band. Therefore, a combination of MRPI design and plant OE provide the basis for the selection of 8 steps as the minimum number of steps that Rods must be moved to ensure correct performance of verification of Rod freedom of movement as well as maintaining the intent of Condition A of LCO 3.1.5 and LCO 3.1.6. | ||
Section 2.2 of the LAR dated June 25, 2018 indicated that difference in the values of the minimum required rod movement is due to the differences between Digital Rod Position Indication (DRPI) and Microprocessor Rod Position Indication (MRPI) used in Ginna. Discuss the determination of the value of 8 steps used in Ginna SR 3.1.4.2 based on Ginna's MRPI, and address acceptability of the use of 8 steps as the minimum rod movement in Ginna SR 3.1.4. | The limits on control banks sequence, overlap, and physical insertion, as defined in the COLA, must be maintained because they serve the function of preserving power distribution, ensuring that the SOM and ejected rod worth are maintained, and ensuring adequate negative reactivity insertion is available on trip. The overlap between control banks provides more uniform rates of reactivity insertion and withdrawal and is imposed to maintain acceptable power peaking during control bank motion. | ||
The proposed change to SR 3.1.4.2 ensures verification of freedom of the shutdown and control rods to move below the LCO limits. The minimum of 8 steps ensure satisfactory completion of SR 3.1 .4.2 while the rods are monitored and controlled during power operation to ensure that safety analyses assumptions for SOM, ejected rod worth, and power distribution power peaking are preserved. | |||
: 2. SR 3.1.4.2 The proposed Ginna SR 3.1.4.2 requires movement of control and shutdown rods a minimum of 8 steps in either direction. The value of 8 steps required for the minimum rod movement is different from the value of 1O steps in the corresponding SR 3.1.4.2 of TSTF-547. Section 2.2 of the LAR dated June 25, 2018 indicated that difference in the values of the minimum required rod movement is due to the differences between Digital Rod Position Indication (DRPI) and Microprocessor Rod Position Indication (MRPI) used in Ginna. | |||
Discuss the determination of the value of 8 steps used in Ginna SR 3.1.4.2 based on Ginna's MRPI, and address acceptability of the use of 8 steps as the minimum rod movement in Ginna SR 3.1.4. | |||
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August29,2018 Page4 Exelon Response: | U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August29,2018 Page4 Exelon Response: | ||
The value of 8 steps used in the Ginna's SR 3.1.4.2 is the minimum number of steps required to see a rod position transition on MRPI, hence successful completion of Surveillance requirement (SR) 3.1.4.2. The true rod position on MRPI is always within +/-8 steps of the indicated position (+/-6 steps due to the 12-step interval and +/-2 steps transition uncertainty due to errors arising from linearity, repeatability, long term drift, power source voltage, temperature variations, and coil sensitivity). | The value of 8 steps used in the Ginna's SR 3.1.4.2 is the minimum number of steps required to see a rod position transition on MRPI, hence successful completion of Surveillance requirement (SR) 3.1.4.2. | ||
Using the current cycle RIL for shutdown 220 steps) as an example, if the shutdown rods are parked at 223 steps, the plant specific procedure directs Operations to move Rods IN from 223 to 212 steps. MRPI transition is normally expected at 217 steps or within the acceptable transition band of 215-219 steps. Once the MRPI transition is obtained, the bank is moved OUT to its pre-test position. | The true rod position on MRPI is always within +/-8 steps of the indicated position (+/-6 steps due to the 12-step interval and +/-2 steps transition uncertainty due to errors arising from linearity, repeatability, long term drift, power source voltage, temperature variations, and coil sensitivity). | ||
A review of plant operating experience shows that Ginna station has not been challenged with meeting the acceptable transition band. Therefore, a combination of MRPI design and plant OE provide the basis for the selection of 8 steps as the minimum number of steps that Rods must be moved to ensure correct performance of verification of Rod freedom of movement. | Using the current cycle RIL for shutdown bank(~ 220 steps) as an example, if the shutdown rods are parked at 223 steps, the plant specific procedure directs Operations to move Rods IN from 223 to 212 steps. MRPI transition is normally expected at 217 steps or within the acceptable transition band of 215-219 steps. Once the MRPI transition is obtained, the bank is moved OUT to its pre-test position. A review of plant operating experience shows that Ginna station has not been challenged with meeting the acceptable transition band. Therefore, a combination of MRPI design and plant OE provide the basis for the selection of 8 steps as the minimum number of steps that Rods must be moved to ensure correct performance of verification of Rod freedom of movement. | ||
: 3. SR 3.1.4.2 and Condition A in LCOs 3.15 and 3.1.6 TSTF-547 uses the different values of | : 3. SR 3.1.4.2 and Condition A in LCOs 3.15 and 3.1.6 TSTF-547 uses the different values of 1O steps and [16 steps, a plant specific value] for the required rod movement in SR 3.1.4.2, and Condition A of LCOs 3.15 and 3.1.6, respectively, while Ginna uses the same value of 8 steps for both SR 3.1.4.2 and Condition A in LCOs 3.1.5 and 3.1.6. | ||
Justify the use of the same value of 8 steps in the corresponding Ginna SR and Condition A compared to the different values for SR 3.1.4.2 and Condition A of LCOs 3.1.5 and 3.1.6 respectively approved in the NRC staff SE for TSTF-547. | |||
Exelon Response: | Exelon Response: | ||
The proposed change to SR 3.1.4.2 states: "Verify rod freedom of movement (trippability) by moving each rod not fully inserted in the 8 steps in either direction." Specifically, the proposed change to Condition A of LCOs 3.15 and 3.1.6 respectively states: "Shutdown bank inserted s 8 steps beyond the insertion limit specified in the COLA." "Control bank A, B, or C inserted s 8 steps beyond the insertion, sequence, or overlap limits specified in the COLR." The selection for the same value of 8 steps for SR 3.1.4.2 and Condition A of LCOs 3.15 and 3.1.6 is consistent with the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16] in Condition A should be replaced with plant specific U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page 5 minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3.1.4.2." As discussed in responses for question 1 and 2, a minimum of 8 steps has been evaluated based on the design of MRPI and successful completion of SR 3.4.1.2 while the rods are monitored and controlled during power operation to ensure that safety analyses assumptions for SOM, ejected rod worth, and power distribution power peaking are preserved.}} | The proposed change to SR 3.1.4.2 states: | ||
"Verify rod freedom of movement (trippability) by moving each rod not fully inserted in the core~ | |||
8 steps in either direction." | |||
Specifically, the proposed change to Condition A of LCOs 3.15 and 3.1.6 respectively states: | |||
"Shutdown bank inserted s 8 steps beyond the insertion limit specified in the COLA." | |||
"Control bank A, B, or C inserted s 8 steps beyond the insertion, sequence, or overlap limits specified in the COLR." | |||
The selection for the same value of 8 steps for SR 3.1.4.2 and Condition A of LCOs 3.15 and 3.1.6 is consistent with the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16] in Condition A should be replaced with plant specific | |||
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page 5 minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." As discussed in responses for question 1 and 2, a minimum of 8 steps has been evaluated based on the design of MRPI and successful completion of SR 3.4.1.2 while the rods are monitored and controlled during power operation to ensure that safety analyses assumptions for SOM, ejected rod worth, and power distribution power peaking are preserved.}} |
Latest revision as of 16:42, 20 October 2019
ML18243A167 | |
Person / Time | |
---|---|
Site: | Ginna ![]() |
Issue date: | 08/29/2018 |
From: | David Gudger Exelon Generation Co |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
Download: ML18243A167 (8) | |
Text
Exelon Generation© 200 Exelon Way Kennett Square. PA 19348 www.exeloncorp.com 10 CFR 50.90 August 29, 2018 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 R. E. Ginna Nuclear Power Plant Renewed Facility Operating License No. DPR-18 NRG Docket No. 50-244
Subject:
Response to Request for Additional Information - License Amendment Request:
Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements"
References:
- 1. License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements," dated June 25, 2018 (ML18176A327).
- 2. E-mail from V. Sreenivas, Ph.D., C.P.M, NRG Licensing Project Manager, to Jessie Hodge, Exelon, "Ginna -TSTF-547 Adoption, Request for Additional Information (RAI), dated August 15, 2018 (ML18228A524).
By letter dated June 25, 2018 (Reference 1), Exelon Generation Company, LLC (EGG) requested a change to the R. E. Ginna (Ginna) Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements.
By e-mail dated August 15, 2018, (Reference 2), NRG issued a Request for Additional Information. to this letter contains the NRC's RAI as documented in Reference 2 immediately followed by Exelon's response. As previously discussed with Mr. V. Sreenivas, Exelon requests approval of the proposed amendment by September 30, 2018. This will reduce Station vulnerability to unnecessary plant transients due to required shutdown actions if multiple rod position indications in a group become inoperable. Once approved, the amendment shall be implemented within 120 days.
There are no commitments contained in this letter.
Should you have any questions concerning this letter, please contact Enrique Villar at (610) 765-5736.
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August29,2018 Page 2 I declare under penalty of perjury that the foregoing is true and correct. Executed on the 291h of August 2018.
Re;):~JT ~ )yv--
David T. Gudger Manager - Licensing & Regulatory Affairs Exelon Generation Company, LLC
Attachment:
- 1) Response to Request for Additional Information cc: Regional Administrator, NRC Region I NRC Resident Inspector NRC Project Manager A. L. Peterson (NYSERDA)
Attachment 1 Response to Request for Additional Information License Amendment Request: Revision to Technical Specifications to Adopt Technical Specifications Task Force TSTF-547, Revision 1, "Clarification of Rod Position Requirements"
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page 1 REQUEST FOR ADDITIONAL INFORMATION REQUESTING LICENSE AMENEDMENT REQUEST TO ADOPT TSTF-547, "CLARIFICATION OF ROD POSITION REQUIREMENTS" EXELON GENERSATION COMPANY. LLC R. E. GINNA NUCLEAR POWER PLANT DOCKET NO. 50-244 By application dated June 25, 2018 (Agencywide Documents Access and management System (ADAMS) Accession No. ML18176A327), Exelon Generation Company, LLC (the licensee) submitted a license amendment request (LAA) to revise the R. E. Ginna Nuclear Power Plant (Ginna) Technical Specifications (TSs) by adopting Technical Specifications Task Force (TSTF) change TSTF-547, "Clarification of Rod Position Requirements." The Reactor Systems Branch (SRXB) staff has determined that the following additional information is needed in order to complete its review.
- 1. Condition A in LCO 3.1.5 and LCO 3.1.6 The proposed TS changes would add a new Condition A to limiting Condition for Operation (LCO) 3.1.5, "Shutdown Bank Insertion Limit", and LCO 3.1.6, "Control Bank Insertion Limits".
The proposed Condition A in both LCOs is applicable when one bank is inserted s 8 steps beyond the insertion limit specified in the Core Operating Limits Report. The NRG staff states in its safety evaluation (ADAMS Accession No. ML15328A350) approving TSTF-547 that the bracketed number (16] should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3.1.4.2.
Provide the plant specific justification for use of s 8 steps in Condition A in LCOs 3.1.5 and 3.1.6 in accordance with the NRC staff SE approving TSTF-547.
Exelon Response:
The proposed change to Ginna Station Technical Specifications (TS) Specification Requirement, SR 3.1.4.2 states:
"Verify rod freedom of movement (trippability) by moving each rod not fully inserted in the core 2:
B steps in either direction."
The 8 steps is Ginna's specific minimum number of steps that rods must be moved to ensure correct performance of the SR 3.1.4.2. One step is equivalent to 0.625 inches A value of "s 8 steps" was selected as the number of allowable steps below the insertion limits specified in the proposed Condition A for LCO 3.1.5 and LCO 3.1.6. The selection of "s 8 steps"
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page2 for these LCOs is consistent with the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16] in Condition A should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2."
In evaluating the value of 8 steps, the following factors were considered:
- Design of the Microprocessor Rod Position Indication (MRPI) System
- Impact on the intent of the TS 3.1.5 and TS 3.1.6 Design of the Microprocessor Rod Position Indication (MRPI) System The MRPI system provides a highly accurate indication of actual control rod position, but at a lower precision than the step counters. The system consists of one detector assembly with 1O coil pairs (coil stack) for each rod. The detectors are constructed with coils of wire spaced on 7.5-inch centers up the drive rod housing, corresponding to 12 steps of control rod movement.
As the rod is withdrawn into the drive rod housing, it affects the inductance of the coils, creating a large difference in inductance between consecutive coils. A signal from each pair of detector coils is fed into the signal processing cards. Each signal processor independently monitors all rods and senses a rod bottom for any rod. The true rod position as converted from inductance of the coils is always within +/-8 steps of the indicated position (+/-6 steps due to the 12-step interval and +/-2 steps transition uncertainty due to errors arising from linearity, repeatability, long term drift, power source voltage, temperature variations, and coil sensitivity).
Based on this design, each control rod position on the MRPI Cathode Ray Tube (CRT) on the Main Control Board is represented by a bar graph (blue background with yellow fill) and as a control rod is withdrawn, the yellow bar rises against the blue background in 12-step (+/-8 steps) increments. To verify rod position, a change of bar graph height must be observed; i.e.: the bank must be inserted a minimum of ~ 8 steps, as an insertion of less than 8 steps may not result in bar graph height to change. As noted above, the MRPI system is normally accurate to +/-
8 steps of rod position.
It is upon this basis and the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16} in Condition A should be replaced with plant specific minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." that 8 steps in Condition A in LCOs 3.1.5 and 3.1.6 is justified.
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page3 Impact on the intent of the TS 3.1.5 and TS 3.1.6 The shutdown bank insertion limits (Alls) in Condition A of LCO 3.1.5 are established to ensure that a sufficient amount of negative reactivity is available to shut down the reactor and maintain the required shutdown margin (SOM). The current cycle RIL for shutdown bank is;;:: 220 steps.
As an example, if the shutdown rods are parked at 223 steps, the plant specific procedure directs Operations to move Rods IN from 223 to 212 steps. MRPI transition is normally expected at 217 steps or within the acceptable transition band of 215-219 steps. A review of plant operating experience shows that Ginna station has not been challenged with meeting the acceptable transition band. Therefore, a combination of MRPI design and plant OE provide the basis for the selection of 8 steps as the minimum number of steps that Rods must be moved to ensure correct performance of verification of Rod freedom of movement as well as maintaining the intent of Condition A of LCO 3.1.5 and LCO 3.1.6.
The limits on control banks sequence, overlap, and physical insertion, as defined in the COLA, must be maintained because they serve the function of preserving power distribution, ensuring that the SOM and ejected rod worth are maintained, and ensuring adequate negative reactivity insertion is available on trip. The overlap between control banks provides more uniform rates of reactivity insertion and withdrawal and is imposed to maintain acceptable power peaking during control bank motion.
The proposed change to SR 3.1.4.2 ensures verification of freedom of the shutdown and control rods to move below the LCO limits. The minimum of 8 steps ensure satisfactory completion of SR 3.1 .4.2 while the rods are monitored and controlled during power operation to ensure that safety analyses assumptions for SOM, ejected rod worth, and power distribution power peaking are preserved.
- 2. SR 3.1.4.2 The proposed Ginna SR 3.1.4.2 requires movement of control and shutdown rods a minimum of 8 steps in either direction. The value of 8 steps required for the minimum rod movement is different from the value of 1O steps in the corresponding SR 3.1.4.2 of TSTF-547. Section 2.2 of the LAR dated June 25, 2018 indicated that difference in the values of the minimum required rod movement is due to the differences between Digital Rod Position Indication (DRPI) and Microprocessor Rod Position Indication (MRPI) used in Ginna.
Discuss the determination of the value of 8 steps used in Ginna SR 3.1.4.2 based on Ginna's MRPI, and address acceptability of the use of 8 steps as the minimum rod movement in Ginna SR 3.1.4.
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August29,2018 Page4 Exelon Response:
The value of 8 steps used in the Ginna's SR 3.1.4.2 is the minimum number of steps required to see a rod position transition on MRPI, hence successful completion of Surveillance requirement (SR) 3.1.4.2.
The true rod position on MRPI is always within +/-8 steps of the indicated position (+/-6 steps due to the 12-step interval and +/-2 steps transition uncertainty due to errors arising from linearity, repeatability, long term drift, power source voltage, temperature variations, and coil sensitivity).
Using the current cycle RIL for shutdown bank(~ 220 steps) as an example, if the shutdown rods are parked at 223 steps, the plant specific procedure directs Operations to move Rods IN from 223 to 212 steps. MRPI transition is normally expected at 217 steps or within the acceptable transition band of 215-219 steps. Once the MRPI transition is obtained, the bank is moved OUT to its pre-test position. A review of plant operating experience shows that Ginna station has not been challenged with meeting the acceptable transition band. Therefore, a combination of MRPI design and plant OE provide the basis for the selection of 8 steps as the minimum number of steps that Rods must be moved to ensure correct performance of verification of Rod freedom of movement.
- 3. SR 3.1.4.2 and Condition A in LCOs 3.15 and 3.1.6 TSTF-547 uses the different values of 1O steps and [16 steps, a plant specific value] for the required rod movement in SR 3.1.4.2, and Condition A of LCOs 3.15 and 3.1.6, respectively, while Ginna uses the same value of 8 steps for both SR 3.1.4.2 and Condition A in LCOs 3.1.5 and 3.1.6.
Justify the use of the same value of 8 steps in the corresponding Ginna SR and Condition A compared to the different values for SR 3.1.4.2 and Condition A of LCOs 3.1.5 and 3.1.6 respectively approved in the NRC staff SE for TSTF-547.
Exelon Response:
The proposed change to SR 3.1.4.2 states:
"Verify rod freedom of movement (trippability) by moving each rod not fully inserted in the core~
8 steps in either direction."
Specifically, the proposed change to Condition A of LCOs 3.15 and 3.1.6 respectively states:
"Shutdown bank inserted s 8 steps beyond the insertion limit specified in the COLA."
"Control bank A, B, or C inserted s 8 steps beyond the insertion, sequence, or overlap limits specified in the COLR."
The selection for the same value of 8 steps for SR 3.1.4.2 and Condition A of LCOs 3.15 and 3.1.6 is consistent with the statement in the NRC's Safety Evaluation for TSTF-547 that specifies: "Bracketed number [16] in Condition A should be replaced with plant specific
U.S. Nuclear Regulatory Commission License Amendment Request Revision to Technical Specifications to Adopt Task Force TSTF-547, Revision 1 August 29, 2018 Page 5 minimum number of steps that the rods must be moved to ensure correct performance of Surveillance Requirement (SR) 3. 1.4.2." As discussed in responses for question 1 and 2, a minimum of 8 steps has been evaluated based on the design of MRPI and successful completion of SR 3.4.1.2 while the rods are monitored and controlled during power operation to ensure that safety analyses assumptions for SOM, ejected rod worth, and power distribution power peaking are preserved.