ML19341B822: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (StriderTol Bot change) |
||
(One intermediate revision by the same user not shown) | |||
Line 18: | Line 18: | ||
=Text= | =Text= | ||
{{#Wiki_filter:_ | {{#Wiki_filter:_ | ||
ENCLOSURE 1 | ENCLOSURE 1 | ||
. s. . .h | . s. . .h | ||
-SEQUOYAH NUCLEAR PI;NT UNIT 1 | -SEQUOYAH NUCLEAR PI;NT UNIT 1 | ||
' PROPOSED TECHNICAL SPECIFICATION CHANGE O . | ' PROPOSED TECHNICAL SPECIFICATION CHANGE O . | ||
TABLE 4.3-8 (Continued) | |||
TABLE NOTATION Daring liquid additions to the tank. - - - - | |||
TABLE NOTATION | |||
Daring liquid additions to the tank. - - - - | |||
(1) tee' 'C' H AsfiELffuNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway and control room alarm annunciation occurs if any of the following conditions exists: | (1) tee' 'C' H AsfiELffuNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway and control room alarm annunciation occurs if any of the following conditions exists: | ||
: 1. Instrument indicates measured levels above the alarm / trip setpoint. | : 1. Instrument indicates measured levels above the alarm / trip setpoint. | ||
Line 39: | Line 30: | ||
( | ( | ||
. 4. | . 4. | ||
(2) The CHANNEL FUNCTIONAL TEST shall also demonstrate that control room alarm | (2) The CHANNEL FUNCTIONAL TEST shall also demonstrate that control room alarm annunciation occurs if any of the following conditions exists: | ||
annunciation occurs if any of the following conditions exists: | |||
: 1. Instrument-indicates measured levels above the alarm setpoint. | : 1. Instrument-indicates measured levels above the alarm setpoint. | ||
: 2. . Circuit failure. | : 2. . Circuit failure. | ||
Line 51: | Line 40: | ||
.(4) CHANNEL CHECK shall consist of verifying indication of flow during periods of release. CHANNEL CHECK shall be.made at least once per 24 hours on | .(4) CHANNEL CHECK shall consist of verifying indication of flow during periods of release. CHANNEL CHECK shall be.made at least once per 24 hours on | ||
' days f on which continuous, periodic, or batch releases are made. | ' days f on which continuous, periodic, or batch releases are made. | ||
l G | |||
l | 9 | ||
_ /- | _ /- | ||
: s. s- - | : s. s- - | ||
I - | |||
g . | g . | ||
.? | .? | ||
LSEQUOYAH'- UNITLI; 3/4 3-73 | LSEQUOYAH'- UNITLI; 3/4 3-73 e | ||
e | |||
;8102270(955 | ;8102270(955 | ||
. . u - | . . u - | ||
.~.s i | |||
J. | |||
.~.s | |||
! ;.- TABLE 4.3-9 (Continued) | ! ;.- TABLE 4.3-9 (Continued) | ||
TABLE NOTATION At all times. | |||
TABLE NOTATION | |||
During waste gas disposal system operation. | During waste gas disposal system operation. | ||
During shield building exhaust system operation. ; | During shield building exhaust system operation. ; | ||
**** During waste gas releases. | **** During waste gas releases. | ||
.(1) The CHANNEL FUNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway and control room alarm annunciation occurs if any of the | .(1) The CHANNEL FUNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway and control room alarm annunciation occurs if any of the following conditions exists: | ||
following conditions exists: | |||
: 1. Instrument indicates measured levels above the alarm / trip setpoint. | : 1. Instrument indicates measured levels above the alarm / trip setpoint. | ||
: 2. Circuit failure. | : 2. Circuit failure. | ||
:l 3. , | :l 3. , | ||
4. | 4. | ||
-(2) The. CHANNEL FUNCTIONAL TEST shall also demonstrate that control room | -(2) The. CHANNEL FUNCTIONAL TEST shall also demonstrate that control room | ||
: alarm annunciation occurs if any of the following conditions exists: | : alarm annunciation occurs if any of the following conditions exists: | ||
: 1. Instrument indicates measured levels above the alarm setpoint. | : 1. Instrument indicates measured levels above the alarm setpoint. | ||
: 2. Circuit failure. | : 2. Circuit failure. | ||
, 13. . | , 13. . | ||
4 | 4 (3) The initial CHANNEL CALIBRATION shall be performed using one or more of the reference standards ' certified by the National Bureau of Standards or using standards that have been obtained from suppliers that participate | ||
(3) The initial CHANNEL CALIBRATION shall be performed using one or more of the reference standards ' certified by the National Bureau of Standards or using standards that have been obtained from suppliers that participate | |||
.- . in measurement assurance activities with NBS. These standards'shall | .- . in measurement assurance activities with NBS. These standards'shall | ||
; permit calibrating the system over its intended range of energy and measurement range. For subsequent CilANNEL CALIBRATION, sources that have | ; permit calibrating the system over its intended range of energy and measurement range. For subsequent CilANNEL CALIBRATION, sources that have | ||
( been related to the initial calibration shall be used. | ( been related to the initial calibration shall be used. | ||
(4). The CHANNEL CALIBRATION shall include the use of standard gas samples containing a nominal: - | (4). The CHANNEL CALIBRATION shall include the use of standard gas samples containing a nominal: - | ||
,1. | ,1. | ||
One-volume percent hydrogen, balance nitrogen, and. | One-volume percent hydrogen, balance nitrogen, and. | ||
-2. 'Four volume percent hydrogen, balance nitrogen. | -2. 'Four volume percent hydrogen, balance nitrogen. | ||
r | r 5' x(S): The CHANNEL CALIBRATION shall include the use of standard gas samples-containing a nominal: . | ||
5' x(S): The CHANNEL CALIBRATION shall include the use of standard gas samples- | |||
containing a nominal: . | |||
; 1. | ; 1. | ||
' -One volume percent oxygen,. balance nitrogen, and- | ' -One volume percent oxygen,. balance nitrogen, and- | ||
" ./. | " ./. | ||
: 2. ;Four volume percent 3 oxygen, balance nitrogen. ' | : 2. ;Four volume percent 3 oxygen, balance nitrogen. ' | ||
a* | a* | ||
. z. | . z. | ||
) .'$EQb0YAH-UNIT ~1 3/4 3-80 | ) .'$EQb0YAH-UNIT ~1 3/4 3-80 6 | ||
6 | |||
^ | ^ | ||
J q% . . | J q% . . | ||
ENCLOSURE 2 SEQUOYA!I flUCLEAR PLANT UNIT 1 DESCRIPTION AND JUSTIFICATION FOR PROPOSED CHAllGES TO TECHNICAL SPECIFICATIONS Description of Change The proposed change deletes the channel functional test requirementa related to instrument controls not set in operate mode from Technical Specif1catica 3 3 3.9 (Table 4.3-8 notations 1 & 2) and 3 3 3.10 (Table 4.3-9 notations 1 & 2). The revised technical specifications should read as shown on Enclosure 1. | |||
ENCLOSURE 2 | |||
SEQUOYA!I flUCLEAR PLANT UNIT 1 DESCRIPTION AND JUSTIFICATION FOR PROPOSED CHAllGES TO TECHNICAL SPECIFICATIONS Description of Change The proposed change deletes the channel functional test requirementa related to instrument controls not set in operate mode from Technical Specif1catica 3 3 3.9 (Table 4.3-8 notations 1 & 2) and 3 3 3.10 (Table 4.3-9 notations 1 & 2). The revised technical specifications should read as shown on Enclosure 1. | |||
Justification for Change Design of the radiation monitoring system does not allow the channels to be set in any mode other than the operate mode. The control switch is spring returned to the operate position. This design feature is checked in the channel functional test. | Justification for Change Design of the radiation monitoring system does not allow the channels to be set in any mode other than the operate mode. The control switch is spring returned to the operate position. This design feature is checked in the channel functional test. | ||
t' | t' | ||
~ | ~ | ||
._. ,}} | ._. ,}} |
Latest revision as of 08:44, 18 February 2020
ML19341B822 | |
Person / Time | |
---|---|
Site: | Sequoyah ![]() |
Issue date: | 02/23/1981 |
From: | TENNESSEE VALLEY AUTHORITY |
To: | |
Shared Package | |
ML19341B820 | List: |
References | |
NUDOCS 8102270685 | |
Download: ML19341B822 (3) | |
Text
_
ENCLOSURE 1
. s. . .h
-SEQUOYAH NUCLEAR PI;NT UNIT 1
' PROPOSED TECHNICAL SPECIFICATION CHANGE O .
TABLE 4.3-8 (Continued)
TABLE NOTATION Daring liquid additions to the tank. - - - -
(1) tee' 'C' H AsfiELffuNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway and control room alarm annunciation occurs if any of the following conditions exists:
- 1. Instrument indicates measured levels above the alarm / trip setpoint.
- 2. Circuit failure.
- 3. ,
(
. 4.
(2) The CHANNEL FUNCTIONAL TEST shall also demonstrate that control room alarm annunciation occurs if any of the following conditions exists:
- 1. Instrument-indicates measured levels above the alarm setpoint.
- 2. . Circuit failure.
~ '
- 3. i 4.
'(3)- The initial CHANNEL CAL'IBRATION shall .be performed using one or more of the reference standards certified by; the National Bureau of Standards or usir.g standards that have been obthined from suppliers that participate
. in' measurement assurance = activities with NBS. These standards shall
. permit-calibrating the system over its intended range of energy and measurement range. For subsequent CHANNEL CALIBRATION, sources that have been related-to the initial calibration shall be used.
.(4) CHANNEL CHECK shall consist of verifying indication of flow during periods of release. CHANNEL CHECK shall be.made at least once per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> on
' days f on which continuous, periodic, or batch releases are made.
l G
9
_ /-
- s. s- -
I -
g .
.?
LSEQUOYAH'- UNITLI; 3/4 3-73 e
- 8102270(955
. . u -
.~.s i
J.
! ;.- TABLE 4.3-9 (Continued)
TABLE NOTATION At all times.
During waste gas disposal system operation.
During shield building exhaust system operation. ;
- During waste gas releases.
.(1) The CHANNEL FUNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway and control room alarm annunciation occurs if any of the following conditions exists:
- 1. Instrument indicates measured levels above the alarm / trip setpoint.
- 2. Circuit failure.
- l 3. ,
4.
-(2) The. CHANNEL FUNCTIONAL TEST shall also demonstrate that control room
- alarm annunciation occurs if any of the following conditions exists:
- 1. Instrument indicates measured levels above the alarm setpoint.
- 2. Circuit failure.
, 13. .
4 (3) The initial CHANNEL CALIBRATION shall be performed using one or more of the reference standards ' certified by the National Bureau of Standards or using standards that have been obtained from suppliers that participate
.- . in measurement assurance activities with NBS. These standards'shall
- permit calibrating the system over its intended range of energy and measurement range. For subsequent CilANNEL CALIBRATION, sources that have
( been related to the initial calibration shall be used.
(4). The CHANNEL CALIBRATION shall include the use of standard gas samples containing a nominal: -
,1.
One-volume percent hydrogen, balance nitrogen, and.
-2. 'Four volume percent hydrogen, balance nitrogen.
r 5' x(S): The CHANNEL CALIBRATION shall include the use of standard gas samples-containing a nominal: .
- 1.
' -One volume percent oxygen,. balance nitrogen, and-
" ./.
a*
. z.
) .'$EQb0YAH-UNIT ~1 3/4 3-80 6
^
J q% . .
ENCLOSURE 2 SEQUOYA!I flUCLEAR PLANT UNIT 1 DESCRIPTION AND JUSTIFICATION FOR PROPOSED CHAllGES TO TECHNICAL SPECIFICATIONS Description of Change The proposed change deletes the channel functional test requirementa related to instrument controls not set in operate mode from Technical Specif1catica 3 3 3.9 (Table 4.3-8 notations 1 & 2) and 3 3 3.10 (Table 4.3-9 notations 1 & 2). The revised technical specifications should read as shown on Enclosure 1.
Justification for Change Design of the radiation monitoring system does not allow the channels to be set in any mode other than the operate mode. The control switch is spring returned to the operate position. This design feature is checked in the channel functional test.
t'
~
._. ,