ML16229A444: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 15: | Line 15: | ||
=Text= | =Text= | ||
{{#Wiki_filter:August 15, 2016 Document Control Desk U.S. Nuclear Regulatory Commission Washington, DC 20555-0001 | {{#Wiki_filter:August 15, 2016 Document Control Desk U.S. Nuclear Regulatory Commission Washington, DC 20555-0001 | ||
==Subject:== | ==Subject:== | ||
Potential Part 21 on Safety Clip, Siemens Part Number 401158 | Potential Part 21 on Safety Clip, Siemens Part Number 401158 | ||
==Dear Sirs,== | ==Dear Sirs,== | ||
National Technical Systems (NTS) recently submitted a request for extension to complete a failure analysis of the Siemens 401158 Safety Clip. NTS has completed the failure analysis and hereby provides its final evaluation. | National Technical Systems (NTS) recently submitted a request for extension to complete a failure analysis of the Siemens 401158 Safety Clip. NTS has completed the failure analysis and hereby provides its final evaluation. | ||
Pursuant to the requirements of 10 CFR Part 21, NTS notified the NRC previously of a potential Part 21 condition. | Pursuant to the requirements of 10 CFR Part 21, NTS notified the NRC previously of a potential Part 21 condition. The subject Safety Clip is used in commercial grade item medium voltage circuit breakers. The subject circuit breakers are manufactured by Siemens Industry Inc. and are dedicated for use as a basic component by NTS. Affected circuit breakers are Siemens Type 5-3AF-GER-350-1200-78, which are a 350 MVA vertical lift type. The Safety Clip in question is made of a black finish steel and retains the Close Pawl Roller. | ||
The subject Safety Clip is used in commercial grade item medium voltage circuit breakers. | During an inspection at Wolf Creek Nuclear Operating Company, it was shown that the subject Safety Clips were cracked, broken, missing, or degraded after 600 to 850 operations. If the Safety Clip breaks and falls off, and the washers and Close Pawl Roller outside bearing and race fall off, then future circuit breaker close operations beyond the next close cycle may not be assured. | ||
The subject circuit breakers are manufactured by Siemens Industry Inc. and are dedicated for use as a basic component by NTS. Affected circuit breakers are Siemens Type 5-3AF-GER-350-1200-78, which are a 350 MVA vertical lift type. The Safety Clip in question is made of a black finish steel and retains the Close Pawl Roller. During an inspection at Wolf Creek Nuclear Operating Company, it was shown that the subject Safety Clips were cracked, broken, missing, or degraded after 600 to 850 operations. | Based on NTS's evaluation, it is judged that the failure of the Siemens 401158 Close Pawl Roller Safety Clip was most probably due to a manufacturer lot batch tolerance issue coupled with the acceleration and shock excitation present at the clip's mounting location. It is further judged that the Close Paw Roller Safety Clip location within the Siemens Type 3AF 350 MVA operating mechanism is the only clip location subject to this excitation level. | ||
If the Safety Clip breaks and falls off, and the washers and Close Pawl Roller outside bearing and race fall off, then future circuit breaker close operations beyond the next close cycle may not be assured. Based on NTS's evaluation, it is judged that the failure of the Siemens 401158 Close Pawl Roller Safety Clip was most probably due to a manufacturer lot batch tolerance issue coupled with the acceleration and shock excitation present at the clip's mounting location. | NTS has provided the Siemens Type 3AF 350 MVA circuit breakers to WCNOC Wolf Creek, PSEG Nuclear LLC Salem, and Entergy ANO. NTS has contacted each utility and recommended that Close Pawl Roller Safety Clip Part Number 401158 be replaced with Safety Clip Part Number 40115. This safety clip is a yellow zinc plated safety clip of different design, and no known problems exist with this safety clip on different type Siemens circuit breakers dedicated by NTS . | ||
It is further judged that the Close Paw Roller Safety Clip location within the Siemens Type 3AF 350 MVA operating mechanism is the only clip location subject to this excitation level. NTS has provided the Siemens Type 3AF 350 MVA circuit breakers to WCNOC Wolf Creek, PSEG Nuclear LLC Salem, and Entergy ANO. NTS has contacted each utility and recommended that Close Pawl Roller Safety Clip Part Number 401158 be replaced with Safety Clip Part Number 40115. This safety clip is a yellow zinc plated safety clip of different design, and no known problems exist with this safety clip on different type Siemens circuit breakers dedicated by NTS . ....:--flq NTS Huntsville | ....:--flq | ||
~ | |||
~~R-NTS Huntsville | |||
* 7800 Highway 20 West | * 7800 Highway 20 West | ||
* Huntsville, AL 35806 * (256) 837-4411 | * Huntsville, AL 35806 * (256) 837-4411 | ||
* Fax: (256) 830*2109 | * Fax: (256) 830*2109 | ||
* www.nts.com NTS Thank you for your consideration in this matter and if you have any questions, please contact NTS' Senior Director of Nuclear Engineering and Test Services, Tom Brewington at (256) 716-4512 or email at tom.brewington@nts.com. | * www.nts.com | ||
Sincerely, - | |||
;i:._ __ ;.-o..._ ... -*----** -** * .--C.:> Megan Toomey Sr. Contracts Manager NTS Huntsville NTS Huntsville | NTS Thank you for your consideration in this matter and if you have any questions, please contact NTS' Senior Director of Nuclear Engineering and Test Services, Tom Brewington at (256) 716-4512 or email at tom.brewington@nts.com. | ||
Sincerely, | |||
*-. ****~-1Jr ;i:._ __ ;.-o..._ ... - * - - --** -** * .-- | |||
C.:> | |||
Megan Toomey Sr. Contracts Manager NTS Huntsville NTS Huntsville | |||
* 7800 Highway 20 West | * 7800 Highway 20 West | ||
* Huntsville, AL 35806 * (256) 837-4411 | * Huntsville, AL 35806 * (256) 837-4411 | ||
* Fax: (256) 830-2109 | * Fax: (256) 830-2109 | ||
* www.nts.com}} | * www.nts.com}} | ||
Latest revision as of 23:51, 4 February 2020
| ML16229A444 | |
| Person / Time | |
|---|---|
| Site: | Wolf Creek  |
| Issue date: | 08/15/2016 |
| From: | Toomey M National Technical Systems |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| Download: ML16229A444 (2) | |
Text
August 15, 2016 Document Control Desk U.S. Nuclear Regulatory Commission Washington, DC 20555-0001
Subject:
Potential Part 21 on Safety Clip, Siemens Part Number 401158
Dear Sirs,
National Technical Systems (NTS) recently submitted a request for extension to complete a failure analysis of the Siemens 401158 Safety Clip. NTS has completed the failure analysis and hereby provides its final evaluation.
Pursuant to the requirements of 10 CFR Part 21, NTS notified the NRC previously of a potential Part 21 condition. The subject Safety Clip is used in commercial grade item medium voltage circuit breakers. The subject circuit breakers are manufactured by Siemens Industry Inc. and are dedicated for use as a basic component by NTS. Affected circuit breakers are Siemens Type 5-3AF-GER-350-1200-78, which are a 350 MVA vertical lift type. The Safety Clip in question is made of a black finish steel and retains the Close Pawl Roller.
During an inspection at Wolf Creek Nuclear Operating Company, it was shown that the subject Safety Clips were cracked, broken, missing, or degraded after 600 to 850 operations. If the Safety Clip breaks and falls off, and the washers and Close Pawl Roller outside bearing and race fall off, then future circuit breaker close operations beyond the next close cycle may not be assured.
Based on NTS's evaluation, it is judged that the failure of the Siemens 401158 Close Pawl Roller Safety Clip was most probably due to a manufacturer lot batch tolerance issue coupled with the acceleration and shock excitation present at the clip's mounting location. It is further judged that the Close Paw Roller Safety Clip location within the Siemens Type 3AF 350 MVA operating mechanism is the only clip location subject to this excitation level.
NTS has provided the Siemens Type 3AF 350 MVA circuit breakers to WCNOC Wolf Creek, PSEG Nuclear LLC Salem, and Entergy ANO. NTS has contacted each utility and recommended that Close Pawl Roller Safety Clip Part Number 401158 be replaced with Safety Clip Part Number 40115. This safety clip is a yellow zinc plated safety clip of different design, and no known problems exist with this safety clip on different type Siemens circuit breakers dedicated by NTS .
....:--flq
~
~~R-NTS Huntsville
- 7800 Highway 20 West
- Huntsville, AL 35806 * (256) 837-4411
- Fax: (256) 830*2109
- www.nts.com
NTS Thank you for your consideration in this matter and if you have any questions, please contact NTS' Senior Director of Nuclear Engineering and Test Services, Tom Brewington at (256) 716-4512 or email at tom.brewington@nts.com.
Sincerely,
- -. ****~-1Jr ;i:._ __ ;.-o..._ ... - * - - --** -** * .--
C.:>
Megan Toomey Sr. Contracts Manager NTS Huntsville NTS Huntsville
- 7800 Highway 20 West
- Huntsville, AL 35806 * (256) 837-4411
- Fax: (256) 830-2109
- www.nts.com