ML17194B083: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:301 Transient and Event Checklist Form ES-301-5 Facility: | {{#Wiki_filter:301 Transient and Event Checklist Form ES-301-5 Facility: Fermi Date of Exam:312012O17 Operating Test No.: 2017-1 A E Scenarios P | ||
Fermi Date of Exam:312012O17 Operating Test No.: 2017-1 A P P | P E 1 2 3 4 i M L N CREW CREW CREW POSITION CREW POSITION o I N | ||
I T POSITION POSITION T I | |||
ROs must serve in both the "at-the-controls" (ATC) and "balance-of-plant" (BOP)positions. | c S A B S A B S A B S A B A | ||
lnstant SROg (SRO-l) must serve in both the SRO and the ATC positions, including at least two instrument or component (l/C) malfunctions and one major transient, in the ATC position. | M A T o o L R T o R T o R T R T U N c o c P o c P o c P o P MC) | ||
lf an SRO-I additionally serves in the BOP posiiion, one l/C malfunction can be credited toward the two l/C malfunctions required for the ATC position.Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5'd) but must be iignificnt per Sectin C.2.a of Appendix D. (.) Reactivity and normal evolutions may be replaced wth additional nstrument or component malfunctions on a one-for'one basis.Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions thai provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. | T P E R U RO RX 2 5 1 3 1 1 0 T | ||
301 Transient and Event Checklist Form ES-301-5 Facility: | sRo-l#1 NOR 3 1 2 1 1 1 K | ||
Fermi2 Date of Exam: 312O12017 Operating Test No.: 2017-1 A P | SRO-U vc 1,4,8 | ||
,10 2,3,4 7,10 2,7 11 4 4 2 MAJ 7,9 6 6,8 5 2 2 1 TS 4,6 1,2,4 5 0 2 2 RX 2 5 1 3 1 1 0 RO 2 I NOR 1 4 1 1 sRo-t#2 vc 10,11 2,3,4 2,3,5 12 4 4 2 K | |||
ROs mustlerve in both the "at-the-controls" (ATC) and "balance-oplant" (BOP)positions. | SRO-U 7,10 ,7,8 MAJ 7,9 6 6,8 5 2 2 1 TS 1,2,4 2 4 0 2 2 RO#1 RX 5 1 1 1 0 K | ||
lnstant SROS (SRO-l) must serve in both the SRO and the ATC positions, including at least two instrument or component (l/C) malfunctions and one major transient, in the ATC position. | sRo-l NOR 3 4 2 1 1 1 T | ||
lf an SRO-I additionally serves in the BOP posiiion, one l/C malfunction can be credited toward the two l/C malfunctions required for the ATC position.Reactivity manipulations may be conducted under normal or controtted abnormal cónditions (refer to Section D'5'd) but must be iignificnt per Sectin C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis.Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions thai provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the righthand columns.For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATG or BOP postion to best evaluate the SRO-I in manipulating plant controls. | SRO-U vc 1,6 2,7 3,5,9 7 4 4 2 MAJ 7,9 6 6,8 5 2 2 1 TS 0 2 2 RO#2 RX 2 1 1 1 0 m NOR 1 1 1 1 1 SRO-I vc 10,11 3,4, 5 4 4 2 SRO-U 10 MAJ 7,9 6 3 2 2 1 TS 0 2 2 lnstructions: | ||
.-- | Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls" (ATC) and "balance-of-plant" (BOP) positions. lnstant SROg (SRO-l) must serve in both the SRO and the ATC positions, including at least two instrument or component (l/C) malfunctions and one major transient, in the ATC position. lf an SRO-I additionally serves in the BOP posiiion, one l/C malfunction can be credited toward the two l/C malfunctions required for the ATC position. | ||
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5'd) but must be iignificnt per Sectin C.2.a of Appendix D. (.) Reactivity and normal evolutions may be replaced wth additional nstrument or component malfunctions on a one-for'one basis. | |||
: 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions thai provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. | |||
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO'I aoolicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. | |||
301 Transient and Event Checklist Form ES-301-5 Facility: Fermi2 Date of Exam: 312O12017 Operating Test No.: 2017-1 A E Scenarios P V 4 T M 1 2 3 P E L N CREW CREW POSITION CREW POSITION CREW POSITION o I N | |||
I T POSITION T I | |||
c S A B S A B S A B S A B A M A T o o L R T o R T o R T R T U N c o c P o c P o c P o P M(.) | |||
T P E R U RO RX 2 5 1 3 1 1 0 | |||
,l NOR 3 4 2 1 1 sRo-r#3 vc 1,4,8 2,7 2,3,5 11 4 4 2 SRO-U ,10 ,7,8 MAJ 7,9 6 6,8 5 2 2 1 TS 4,6 2 3 0 2 2 RX 1 1 1 1 0 RO#3 NOR 3 1 2 I 1 1 SRO-I vc 1,6 3,4 2,7 7 4 4 2 10 SRO-U MAJ 7,9 6 6,8 5 2 2 1 TS 0 2 2 | |||
,l RO#4 RX 2 1 1 0 NOR 1 I 1 1 1 SRO-I vc 10,11 3,4, 5 4 4 2 SRO-U 10 MAJ 7,9 3 2 2 1 TS 0 2 2 RO#5 RX 5 1 1 1 0 NOR 3 4 2 1 1 1 SRO-I ltc 1,6 2,7 3,5,9 7 4 4 2 SRO-U MAJ 7,9 6 6,8 5 2 2 1 TS 0 2 2 lnstructions: | |||
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applícble for RO applicants. ROs mustlerve in both the "at-the-controls" (ATC) and "balance-oplant" (BOP) positions. lnstant SROS (SRO-l) must serve in both the SRO and the ATC positions, including at least two instrument or component (l/C) malfunctions and one major transient, in the ATC position. lf an SRO-I additionally serves in the BOP posiiion, one l/C malfunction can be credited toward the two l/C malfunctions required for the ATC position. | |||
: 2. Reactivity manipulations may be conducted under normal or controtted abnormal cónditions (refer to Section D'5'd) but must be iignificnt per Sectin C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis. | |||
: 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions thai provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the righthand columns. | |||
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATG or BOP postion to best evaluate the SRO-I in manipulating plant controls. .--}} | |||
Latest revision as of 02:02, 30 October 2019
| ML17194B083 | |
| Person / Time | |
|---|---|
| Site: | Fermi  |
| Issue date: | 04/03/2017 |
| From: | NRC/RGN-III |
| To: | Detroit Edison, Co |
| Shared Package | |
| ML17061A779 | List: |
| References | |
| Download: ML17194B083 (2) | |
Text
301 Transient and Event Checklist Form ES-301-5 Facility: Fermi Date of Exam:312012O17 Operating Test No.: 2017-1 A E Scenarios P
P E 1 2 3 4 i M L N CREW CREW CREW POSITION CREW POSITION o I N
I T POSITION POSITION T I
c S A B S A B S A B S A B A
M A T o o L R T o R T o R T R T U N c o c P o c P o c P o P MC)
T P E R U RO RX 2 5 1 3 1 1 0 T
sRo-l#1 NOR 3 1 2 1 1 1 K
SRO-U vc 1,4,8
,10 2,3,4 7,10 2,7 11 4 4 2 MAJ 7,9 6 6,8 5 2 2 1 TS 4,6 1,2,4 5 0 2 2 RX 2 5 1 3 1 1 0 RO 2 I NOR 1 4 1 1 sRo-t#2 vc 10,11 2,3,4 2,3,5 12 4 4 2 K
SRO-U 7,10 ,7,8 MAJ 7,9 6 6,8 5 2 2 1 TS 1,2,4 2 4 0 2 2 RO#1 RX 5 1 1 1 0 K
sRo-l NOR 3 4 2 1 1 1 T
SRO-U vc 1,6 2,7 3,5,9 7 4 4 2 MAJ 7,9 6 6,8 5 2 2 1 TS 0 2 2 RO#2 RX 2 1 1 1 0 m NOR 1 1 1 1 1 SRO-I vc 10,11 3,4, 5 4 4 2 SRO-U 10 MAJ 7,9 6 3 2 2 1 TS 0 2 2 lnstructions:
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls" (ATC) and "balance-of-plant" (BOP) positions. lnstant SROg (SRO-l) must serve in both the SRO and the ATC positions, including at least two instrument or component (l/C) malfunctions and one major transient, in the ATC position. lf an SRO-I additionally serves in the BOP posiiion, one l/C malfunction can be credited toward the two l/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5'd) but must be iignificnt per Sectin C.2.a of Appendix D. (.) Reactivity and normal evolutions may be replaced wth additional nstrument or component malfunctions on a one-for'one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions thai provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns.
- 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO'I aoolicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
301 Transient and Event Checklist Form ES-301-5 Facility: Fermi2 Date of Exam: 312O12017 Operating Test No.: 2017-1 A E Scenarios P V 4 T M 1 2 3 P E L N CREW CREW POSITION CREW POSITION CREW POSITION o I N
I T POSITION T I
c S A B S A B S A B S A B A M A T o o L R T o R T o R T R T U N c o c P o c P o c P o P M(.)
T P E R U RO RX 2 5 1 3 1 1 0
,l NOR 3 4 2 1 1 sRo-r#3 vc 1,4,8 2,7 2,3,5 11 4 4 2 SRO-U ,10 ,7,8 MAJ 7,9 6 6,8 5 2 2 1 TS 4,6 2 3 0 2 2 RX 1 1 1 1 0 RO#3 NOR 3 1 2 I 1 1 SRO-I vc 1,6 3,4 2,7 7 4 4 2 10 SRO-U MAJ 7,9 6 6,8 5 2 2 1 TS 0 2 2
,l RO#4 RX 2 1 1 0 NOR 1 I 1 1 1 SRO-I vc 10,11 3,4, 5 4 4 2 SRO-U 10 MAJ 7,9 3 2 2 1 TS 0 2 2 RO#5 RX 5 1 1 1 0 NOR 3 4 2 1 1 1 SRO-I ltc 1,6 2,7 3,5,9 7 4 4 2 SRO-U MAJ 7,9 6 6,8 5 2 2 1 TS 0 2 2 lnstructions:
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applícble for RO applicants. ROs mustlerve in both the "at-the-controls" (ATC) and "balance-oplant" (BOP) positions. lnstant SROS (SRO-l) must serve in both the SRO and the ATC positions, including at least two instrument or component (l/C) malfunctions and one major transient, in the ATC position. lf an SRO-I additionally serves in the BOP posiiion, one l/C malfunction can be credited toward the two l/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controtted abnormal cónditions (refer to Section D'5'd) but must be iignificnt per Sectin C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions thai provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the righthand columns.