Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• 05000445/FIN-2013007-02  + (Inadequate Voltage Calculations for the 125 VDC and 120 VAC Buses)
• 05000346/FIN-2011004-04  + (Inadequate Weld Records for CRDM Housings)
• ENS 51234  + (Inadequate Welds Affecting Structural Capacity of Embed Plates)
• 05000341/FIN-2017001-01  + (Inadequate Work Instructions for Maintenance on EDG 14)
• 05000247/FIN-2010005-03  + (Inadequate Work Coordination Relative to Reactor Cavity Liner Repair That Resulted in Additional Unplanned Collective Exposure)
• 05000282/FIN-2009004-01  + (Inadequate Work Instruction for Weld Repairs on the 11 component Cooling Heat Exchanger)
• 05000528/FIN-2010004-02  + (Inadequate Work Instruction to Replace Emergency Diesel Generator Starting Air Turning Gear Interlock Valves)
• 05000305/FIN-2009005-06  + (Inadequate Work Instructions Lead to Component Cooling Water Relief Valve Lift and Surge Tank Level Drop)
• 05000454/FIN-2012005-02  + (Inadequate Work Instructions Lead to Failure of the 1B SX Pump Motor)
• 05000461/LER-1997-023-01, Inadequate Work Instructions Leads to Potential Over-Greasing of Motor Bearings Causing Potential Failure of Various Motors Has Been Canceled  + (Inadequate Work Instructions Leads to Potential Over-Greasing of Motor Bearings Causing Potential Failure of Various Motors Has Been Canceled)
• 05000280/FIN-2008005-01  + (Inadequate Work Instructions Result in Actuation of Unit 1 Safety Injection Train B)
• 05000277/FIN-2009002-01  + (Inadequate Work Instructions Result in Inadvertent ESF Actuation)
• 05000305/FIN-2011002-02  + (Inadequate Work Instructions Results in Potential Orange Path)
• 05000266/FIN-2009003-02  + (Inadequate Work Instructions and Procedures for 2P-11B Component Cooling Water Pump Maintenance)
• 05000388/FIN-2016003-01  + (Inadequate Work Instructions for Breaching Internal Flood Barrier)
• 05000255/FIN-2013002-02  + (Inadequate Work Instructions for Component Cooling Water Heat Exchanger)
• 05000528/FIN-2011002-05  + (Inadequate Work Instructions for Condenser Coating)
• 05000456/FIN-2012005-05  + (Inadequate Work Instructions for Ensuring 2A EDG Jacket Water Heat Exchanger Gasket Compression)
• 05000282/FIN-2013002-04  + (Inadequate Work Instructions for Foreign Material Removal from D2 EDG Air Start Piping)
• 05000354/FIN-2009003-01  + (Inadequate Work Instructions for Impairing the Flood Protection Function of the Safety Auxiliary Cooling System Water-Tight Door)
• 05000341/FIN-2017002-01  + (Inadequate Work Instructions for Maintenance on EDG 14)
• 05000341/FIN-2016004-01  + (Inadequate Work Instructions for Maintenance on Flexible Couplings for EDGs)
• 05000528/FIN-2008003-01  + (Inadequate Work Instructions for Reinstallation of Constant Support Hanger)
• 05000482/FIN-2014002-01  + (Inadequate Work Instructions for Reinstallation of ESW Expansion Joints)
• 05000251/FIN-2015003-01  + (Inadequate Work Instructions for Replacing Main Generator Current Transformers)

• 05000266/FIN-2009003-04  + (Inadequate Work Instructions for South Service Water Header Work)

• 05000353/FIN-2017001-01  + (Inadequate Work Instructions for Staging of Equipment and Routing of Temporary Power Cables)
• 05000280/FIN-2009004-04  + (Inadequate Work Instructions lead to packing failure of ESW Pump 1-SW-P-1B)
• 05000361/FIN-2011003-02  + (Inadequate Work Instructions to Ensure Environmentally Qualified Configuration)
• 05000280/FIN-2009003-01  + (Inadequate Work Instructionsfor Installations of a Design Change)
• 05000311/FIN-2016002-03  + (Inadequate Work Order Planning Results in Main Generator AVR STV Relay Trip)
• 05000271/FIN-2008002-01  + (Inadequate Work Order Results in Unplanned \"A\" Service Water Pump Inoperability)
• 05000324/FIN-2013003-03  + (Inadequate Work Order to Perform a Modification to the Control Room Emergency Ventilation System)
• 05000317/FIN-2012005-01  + (Inadequate Work Package Led to Reactor Coolant System Pressure Boundary Leakage)
• 05000244/FIN-2014004-01  + (Inadequate Work Packages Associated with Maintenance on the Main Generator Exciter Air Cooler Reversing Head)
• 05000247/FIN-2010005-02  + (Inadequate Work Planning Control Relative to Regenerative Heat Exchanger Permanent Shielding Modification That Resulted in Additional Unplanned Collective Exposure)
• 05000333/FIN-2009003-05  + (Inadequate Work Planning for Strain Gauge Resulted in Unplanned Exposure)
• 05000333/FIN-2011005-02  + (Inadequate Work Planning for\'A\' Reactor Recirculation Pump Replacement)
• Information Notice 2016-08, Inadequate Work Practices Resulting in Faulted Circuit Breaker Connection  + (Inadequate Work Practices Resulting in Faulted Circuit Breaker Connection)
• 05000352/FIN-2016001-03  + (Inadequate Work Staging and Housekeeping Walkdowns During PreOutage Preparations)
• 05000237/FIN-2012002-07  + (Inadequate Work instruction Leads to Failure of Secondary Containment Interlock)
• 05000254/FIN-2015002-02  + (Inadequate Zone of Protection for Electrical Bus Maintenance)
• 05000387/FIN-2013004-03  + (Inadequate and Untimely Actions to Address a Failed Instrument Necessary for Diagnosis of Emergency Conditions)
• 05000352/FIN-2013004-01  + (Inadequate and Untimely Corrective Actions Associated With the Unit 1 Instrument Air System)
• 05000336/FIN-2009005-04  + (Inadequate and Untimely Corrective Actions Causes Loss of Annunciators and Declaration of a NOUE)
• 05000336/FIN-2009004-01  + (Inadequate and Untimely Corrective Actions Causes Reactor Trip)
• 05000280/FIN-2009004-01  + (Inadequate compensatory measures for the impairment of fire detection systems)
• 05000443/FIN-2008003-02  + (Inadequate corrective actions to prevent recurrence of mispositioned stow-operated valves caused inadvertent drain of 2000 gallons from RCS)
• 05000247/FIN-2015007-02  + (Inadequate design verification that adequate voltages would be available to all Class 1E motors, MOVs, static loads, and MCC control circuits and contactors at the minimum DVR dropout setting)
• 05000247/FIN-2015007-01  + (Inadequate design verification that protective device settings do not allow connected Class 1E loads to become damaged or unavailable under normal and sustained degraded voltage conditions during a design basis event.)
• 05000219/FIN-2009003-02  + (Inadequate evaluation Results in Instrument Air Transient)