Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- 05000348/LER-1979-057-03, /03L-0:on 791122,steam Generator B Level Channel 486 Declared Inoperable Due to High Reading.Caused by Instruments Equalizing Valve Leaking.Valve Tightened,Tested & Returned to Operation + (ML19256G016)
- ML19256G017 + (ML19256G017)
- 05000348/LER-1979-058-03, /03L-0:on 791121,boron Injection Tank Declared Inoperable Due to Low Concentration.Caused by Inadvertent Safety Injection.Concentration Increased by Batching + (ML19256G018)
- ML19256G019 + (ML19256G019)
- ML19256G021 + (ML19256G021)
- ML19256G023 + (ML19256G023)
- ML19256G024 + (ML19256G024)
- ML19256G025 + (ML19256G025)
- 05000237/LER-1979-064-03, /03L-0:on 791124,torus-to-drywell Vacuum Breaker Found Inoperable.Caused by Swollen Teflon Shaft Bushings. Bushings Machined to Required Clearance & Study Initiated Re Applicability of Teflon as Bushing Material + (ML19256G026)
- ML19256G027 + (ML19256G027)
- ML19256G029 + (ML19256G029)
- ML19256G030 + (ML19256G030)
- ML19256G031 + (ML19256G031)
- ML19256G032 + (ML19256G032)
- ML19256G034 + (ML19256G034)
- ML19256G035 + (ML19256G035)
- ML19256G036 + (ML19256G036)
- ML19256G037 + (ML19256G037)
- ML19256G039 + (ML19256G039)
- ML19256G040 + (ML19256G040)
- ML19256G042 + (ML19256G042)
- 05000325/LER-1979-089, Forwards LER 79-089/03L-0 + (ML19256G044)
- ML19256G045 + (ML19256G045)
- 05000325/LER-1979-089-03, /03L-0:on 791120,reactor Core Isolation Cooling Turbine Tripped on Mechanical Overspeed During Scram.Caused by Crack in Amphenol Connector to Tachometer Pickup. Connector Replaced + (ML19256G046)
- ML19256G047 + (ML19256G047)
- ML19256G048 + (ML19256G048)
- 05000289/LER-1979-017, Forwards LER 79-017/01T-1 + (ML19256G049)
- ML19256G050 + (ML19256G050)
- ML19256G051 + (ML19256G051)
- ML19256G052 + (ML19256G052)
- 05000289/LER-1979-017-01, /01T-1:on 791108,size of Support Bolting for Rigid Anchor DHH-127 Was Found to Be Inadequate in Design & Installation.Caused by Bolts Being 5/8-inch in Diameter, Contrary to 3/4-inch Design Requirement + (ML19256G053)
- ML19256G056 + (ML19256G056)
- ML19256G057 + (ML19256G057)
- ML19256G058 + (ML19256G058)
- ML19256G060 + (ML19256G060)
- ML19256G061 + (ML19256G061)
- ML19256G062 + (ML19256G062)
- ML19256G063 + (ML19256G063)
- ML19256G064 + (ML19256G064)
- ML19256G066 + (ML19256G066)
- ML19256G067 + (ML19256G067)
- ML19256G068 + (ML19256G068)
- ML19256G069 + (ML19256G069)
- ML19256G070 + (ML19256G070)
- ML19256G071 + (ML19256G071)
- ML19256G072 + (ML19256G072)
- ML19256G073 + (ML19256G073)
- ML19256G074 + (ML19256G074)
- ML19256G075 + (ML19256G075)
- ML19256G076 + (ML19256G076)
- ML19256G077 + (ML19256G077)