ML15160A431

NYS000560 - Indian Point Steam Generator Materials Summary Table

ML15160A431
Person / Time
Site:	Indian Point
Issue date:	06/09/2015
From:	State of NY, Office of the Attorney General
To:	Atomic Safety and Licensing Board Panel
SECY RAS
References
RAS 27916, ASLBP 07-858-03-LR-BD01, 50-247-LR, 50-286-LR
Download: ML15160A431 (1)

Text

NYS000560 Submitted: June 9, 2015 Indian Point Steam Generator Materials Table Unit 2, Docket No. 50-247, Unit 3, Docket No. 50-286, License No. DPR-26 License No. DPR-64 Installation Year 2000 1989 and Model Model 44F 1, 2, 4 Model 44F 1, 2, 5 ASME Code Boiler and Pressure Vessel,Section III Boiler and Pressure Vessel,Section III (1980)1 (1984)1 Primary Construction Low alloy carbon steel1 Low alloy carbon steel1 Material Tubes Alloy 600, thermally treated1, 3 Alloy 690, thermally treated1,3 (SB-163, Thermally Treated, (SB-163)7 Code Case N-20)6 Tubes, Primary-Side Inconel1,3 Inconel1,3 Cladding Tube-to-Tube Sheet Welds N/A N/A Tubesheet Low alloy carbon steel (SA 508) 4,8 Low alloy carbon steel (SA 508)5,8 Tubesheet, Primary-Side Weld deposited Ni-CR-Fe alloy4 Weld deposited Ni-CR-Fe alloy5 Cladding Inconel6,8 Inconel weld deposit7,8 Divider Plate Alloy 600 (ASME-SB-168)2,8 Alloy 600 (ASME-SB-168)2,8 Divider Plate Cladding stainless weld rod - Type 304 equivalent6 stainless weld rod - Type 304 equivalent7 Divider Plate-to-Steam conservatively assumed that the weld conservatively assumed that the weld Generator Welds materials are the associated Alloy 600 weld materials are the associated Alloy 600 weld materials2 materials2 Stub Runner and Welds N/A N/A Channel Head Low alloy carbon steel (SA-216 WCC)6,8 Low alloy carbon steel (SA 508 Class 3)7,8 Channel Head Cladding Austenitic stainless steel1,8 Austenitic stainless steel1,8 Sources:

1 4 6 8 LRA 2.3.1.4 IP2 SG Program, p.4 IP2 UFSAR 4.2.2.3 IP-RPT-06-AMM34 2 5 (Table 2)

SSER 3-18 IP3 SG Program, p.4 (Table 4.2-1) (2014) 3 7 SSER 3-21 IP3 UFSAR 4.2.2 (Table 4.2-1) (2007)