ML102420248
ML102420248 | |
Person / Time | |
---|---|
Site: | Peach Bottom, Limerick ![]() |
Issue date: | 07/09/2010 |
From: | Dickenson R, Wasong A Exelon Generation Co |
To: | D'Antonio J Operations Branch I |
Hansell S | |
Shared Package | |
ML092470056 | List: |
References | |
TAC U01795, TAC U01796 | |
Download: ML102420248 (109) | |
Text
-- - - - --
HI1NGE PART 1 PART 2 Firm' are V r.3.3+
TOTAL tAME LJI3JECT I STR leTOR DArE RIOO (F) lI.PP£RS EDUCATION PfWOUCT8 1 r..A cB J C:J I\.lli - RIl 10 U PO.,le 1\ N b Q7 I 6:'4 2 ' e.C;:) CD"l cE:I 3 r:;CJ D:J E 4 ~ .:;B;:, c::C:J cO:l cE:J 5 :: " cB:J I:"C:I 6 r ::J B:J c:C::! ... c-E=
c:E:J
--- 10 7 r..A c:B::J 8 ~ :J 9 J
- J _
B~ ... cD::! E:J cC:::J cD:J c:E.:J cD:J E~
c:C:::J cD;:J E:J
- I ~ cc=> cO:J E:I 11 12 __ c8::J c::C:I c;D E
13 c..I!,::J c;C::' r:;O:::J e.E.
14 ~ :::l c8:::l e.C~ c:E:I 15 ;:: :I c8:1 cO= -E
- W
)
16 ['" ;:J cC::I cO::::! c:E:J 17 ' - c:8~ C:I 0] E C
18 c:8:1 c:C:J cD =E:J e.8:J c..C~ [0 'J 19 _
,... E t::J
~
20 A":I c..C;:, cD cE:I ~ ~
21 AJ C:J cD:'] cE:J VJ 22 <-A:J e.Bc:l e.O.::l .:;E:! \('l cO- E:! -J --\
c:C:::l cD;:, cE:::J cC::J cD:! c:E:::J
-... -CE c:c= .... O::r cE.::
27 [ A:I cB:I 28 t:
.- cD::! cE::!
O~ c.E 29 e.8::; c:C:I cO;;J E cO- c:-E CU 30 :I cB::J CD ><
c8::l cO::J cE::l tn
~ W c:B::J e.C' rD:::J ...E:::l 33 -A~ c:B"l ~C::l 34 ' " c8:! cC::l cO:::) E;:J
.- cE;:J ::l 0
35 cB::J e.C".:! cO":::J c:E:J U cB:I r:C -=0 -E:l 36 37 ' - c8= c:C c.0::! E
- J c8"J c::C..J cE::l tj!
38 39 :::l cB:::J cC::J cE:!
40 cA:1 c8:::J cC::i cE~
W 41 ::J cB:J cO::J cE~
42 c, ::I cB
-....I ~
43 c - .:;8:1 44 :::J CB::J 45 L :I ~:J 46 _ r::S:J cC c:0::J
~ cE
~i .:J 47 c:B::J . . . cD::! I:E 48 cB:J cC::J c;b:l t:E I 49 cO::! ::E c8::! cD- E:J
- Il R£ Dell m (J)
(J) (')
AccuScan . (')
0 0
JJ dvanlllg :Il m m
--- Firmware Ver. 3.3+
-- N ME _ _--:~-------- _ _ ____ _ __
SUBJECT_ _ _ _ __
OAE _ _ _ _ _ __
'STRUCTOA _ _ _ _ __
PEA 0,_ _ _ __ _
_ 51 :I _ B :J c C:::I t;Q ::! c::E:J
_ 52 :J c 6 ::! c:C:! c D:J t: E:J
_ 53 - :I - B ::I c C :J c O:::l c E:J
_ 54 <:. :J c:B ::J c C ':J c O~ t: E :!
_ 55 .:l cB :J cC::l c O:J c E:J
_ 56 - ::l c 8 ::l c C ::l c: O.:J c::E::l
_ 57 t:::l c:B:::I c C::l c O= c E ::l
_ 58 I- A ::J c B ::J c C:: c O:l c E ::l
_ 59 L ::l c 8 ::l c C:J c o :J t: E::l
_ 60 C :J c B :J t:C:::I c D:! cE :J
_ 61 ~ t: B ~ t:C:J c O::l c E :J
_ 62 t ~ c B::l c C:J c O:J c E ~
_ 63 ' A ::! c 8 ::1 t: C::l c o ::l c E::l 64 "":J c s.:: c C ::! c O:J 65 :J c B:::I =C:J c o ::l c E:J c: E ~
w
_ 66 A :: c B :J c C:J ;::0 ::1 CE Cl
~
_ 67 ~ c B :J cC.:I c O:l CE Cl
_ 68 , .:l c B :J c C::l c O:J c E::l 69 r :J c B :J c C::l D.:J c E::J 70 - A :J =B::l c C.:I CO::l c E::l ---
~
_ 71 A:l c B ;J c C cD c E;J
_ 72 cB o:: C- c D::! t. E :!
_ 73 :J c B ::l c C:J c O::J c E:J
_ 74 t:. :J c B ::l c;C :I I::O::l cE::l
_ 75 c: :J c 8 ::l c C:::I c:O::J c E:J
_ 76 r _ c 8 ::l c C:J cD ::! c E:J
_ 77 ./ - c 8 ::l r::C :J c D ::! c E::J 78 c .:I c B ::l c C::l c D 79 c:A .:! c B ::J 80 A:J c B :J c:C -:.
c C::l c D :!
c D::
r:: E :l c: E:J c E:J
-cE
_ 81 - A::I c B:J c:C L O::! c E CO
_ 82 :! c 8 :J c C::J c D ::! c: E:l ><
_ 83 - A, 'l c B :J c:C ::l c D.:; c E:J W
_ 84 ~ :I c 8 :: cC ::l c O::! c E:::I
_ 85 c A .:I c B :J c C:I c O:::l c E::l
_ 86 .::1\ cB :J cC ::I c O:::l cE
_ 87 !;:A::l c 8 ::l c C::l c D::> cE
_ 88 c l> c B ::l cC c O.J c:E
_ 89 r- A:J c B::! r::C::l c D ::! c E:J
_ 90 A.:J t:B ::l I::C::l c O::l c:E::l
_ 91 ::J c 8 :J c C:J c O.:J c E:J 92 95 C
=
- J t:B :J 93 t:. :J c B::l 94 c :I tB .:I
- I ;::B::l c C::!
I::C:::I c C:J c C:;
96 r A ::J c B ::l c C ::J c D 97 c D;.) c E.:J t:O::l c E:J c 1)"1 I::E :J c O:J c E c E::l
- J c B::l r: C:! c O:l c: E.::::l 98 c:A :J c B ::l '::C:I COol c. E w
- 99 A :J c B:J c:C :J c D:! c E :::l
- 100 - A::l c: B::l c C ::J c O:! E::l flEO RO£fl
- 0 m cr (J)
(J) o AccuScan Adv8nt g
- o o
- 0 m
\S& o
- 0 m
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 1 10: 23062 Points: 1.00 LGS Unit 1 Plant conditions are as follows:
OPCON 5 ST-6-107-632-1, "One Rod Out Interlock Verification Testing" is in progress Control Rod 34-35 is at position 00 Control Rod 34-35 is selected and withdrawn one notch using the WITHDRAW pushbutton WHICH ONE of the following identifies the expected sequence of RDCS lamp indications?
A. WITHDRAW light ONLY B. WITHDRAW light, SETTLE light ONLY C. INSERT light, WITHDRAW light ONLY D. INSERT light, WITHDRAW light, SETTLE light Answer: D Answer Explanation:
ANSWER: INSERT light, WITHDRAW light, SETTLE light: Correct, by pressing the WITHDRAW PB the following will happen:
- 1. insert signal to get collet fingers out of notch
- 2. withdraw signal
- 3. settle function DISTRACTORS:
WITHDRAW light: See Above WITHDRAW light, SETTLE light: See Above INSERT light, WITHDRAW light: See Above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Topic: identifies the sequence of RDCS lamp indications for a continuous rod withdrawal from notch 10 to
---t-::
RO value: 3.S SRO-Value:
. - .-------f-=---3.4 KA
Reference:
201002 K4.01
~~-----+r~~~~~----~----~------------------~1 Comments: General Data Technical Reference with I S73.1.A I Revision Number:
i 0CognwveiGeve-1-- L PRA:(Le. yeS~or-N--o-o-r-#---4~N~*--------------4 10CFRSS.43 n/a for RO N/A Question History: (Le. LGS LGS Bank I NRC.:QS, OYS CERT-04 Question Source: _(i._e_._N_ew_,-I-M_Od_i_fie~d~~----c*-*
Bank, Modified)
r
~
Revision History: Revision Mod for OPCON S, and History: (i.e. Modified single notch WD distractor "b" to make
. plausible based on OTPS ~
i review~ _ _ ._ _ _-I-_ _ __
i Supplied Ref (If Non~. __ .
appropriate): i.e. ABN-##) __ _
Excluded
Reference:
(i.e. None I Ensure ON-## not rovided Low
EXAMINATION ANSWER KEY LSRO 10-1 !\IRC Initial Licensing Examination 2 10:23097 Points: 1.00 PBAPS Unit 2 is in a refueling outage with plant conditions as follows:
Reactor Cavity water level is + 474" The Steam Dryer is being removed Recirculation Pumps are OFF (shutdown)
"2A" Loop of RHR is in Shutdown Cooling "2B" Loop of RHR is OFF (shutdown)
"2A" Control Rod Drive (CRD) Pump is in service Shutdown Cooling is removed from service.
WHICH ONE of the following describes the water flow through the # 8 Jet Pump inlet mixer?
A. NO water flow (stagnant water inside Jet Pump) due to no forced flow.
B. Water flow in the 'normal' direction (from annulus to core) due to natural circulation.
C. Water flow in the 'reverse' direction (from core to annulus) due to natural circulation.
D. Jet Pump Drive flow AND Jet Pump Driven flow due to the affect of the Control Rod Drive (CRD) Pump flow.
Answer: B Answer Explanation:
B (water flow in the 'normal' direction (from annulus to core) due to natural Circulation.) is correct because there is significant decay heat present when the starting a refueling outage. The decay heat will raise the temperature of the core water and with the Reactor Cavity water level filled above +50 inches there is direct communication between the hot water on the top of the core AND the cooler water in the Reactor Annulus region. This allows for cold water to enter the bottom of the core and then be removed with natural circulation (cooler water from the annulus region through the Jet Pump Inlet Mixers to the core and then through the separators back to the annulus region.
A (NO water flow (stagnant water inside Jet Pump) due to no forced flow.) is wrong because there is natural circulation even though there is no forced core flow C (water flow in the 'reverse' direction (from core to annulus) due to flow from the other Recirc Loop Jet Pumps.) is wrong because there is not enough flow from the other loop of Jet pumps to drive reverse flow (no forced core flow).
o (Jet Pump Drive flow AND Jet Pump Driven flow due to the affect of the Control Rod Drive (CRD) Pump flow.) is wrong because the CRD pump does inject cold water into the bottom of the core but does NOT provide Jet Pump Drive flow.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 2 Info
~estion Ty~e: Multiple Choice ..
Status: Active .-.-.----.
~ways select on test? . No
- Authorized fo~actice? No I Points:
Time.!o Complete:
1.00 3
. Difficulty: 3.00 System~ 23097
. User-Defined ID: 23097 I Cross Reference Number: NLSRO-5002-7 12~4000-1 t-
[Topic:
Flow through Jet Pumps dI to latural :il :ulation (High I decay he~'!Jgad) i RO value: 3.3
- SRO Value: [3.5 KA
Reference:
290002 K4.05 Comments: r=.-.--.~...
General Data Technical Reference with M-1-B-65 shts Revisio Revision Number: 3&4 n #: 0/0 M-352 shts 1 & 60/63 2 81/67 I M-361 shts 1 I i &2 i Cognitive Level H PRA~Yes or No or #) N 110CFR55.43 (n/a for RO) 10CFR55.41 (b) 7 Question History: (i.e. LGS I New NRC-05, OYS CERT-04)
Question Source: (Le. New, Bank, Modified)
I New I
~vision History: Revision New**
History: (i.e. Modified distractor "b" to make plausible based on OTPS I revle~ .__.__
. Supplied Ref (If . None
~propria.!e~(i.e. ABN-##)_I-:-:_.. _ _
[ Excluded
Reference:
(i.e. None Ensure ON-## not provided) .-.
Low KA Justification (if i N/A required) I
!i Safety Fljnction 5
EXAMINATION ANSWER KEY LSRO 10-1 t\IRC Initial Licensing Examination 3 10: 23106 Points: 1.00 PBAPS Unit 3 is in a refueling outage with plant conditions as follows:
The oncoming Fuel Handling Director (FHD) is told that the Refuel Platform Operator (RPO) received a whole body dose of 155 mrem during 90 minutes of fuel transfers due to Main Hoist contamination levels.
WHICH ONE of the following describes the posting on the Refuel Platform Trolley?
A. Radiation Area B. High Radiation Area C. Level 1 Locked High Radiation Area D. Level 2 Locked High Radiation Area Answer: B Answer Explanation:
B (High Radiation Area) is correct because the criteria for posting a High Radiation Area is receiving a dose equivalent in excess of 0.1 rem in 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> at 30 centimeters from the radiation source. The RPO received 155 mrem/90 minutes = 155 mrem/1.5 hours5.787037e-5 days <br />0.00139 hours <br />8.267196e-6 weeks <br />1.9025e-6 months <br /> = 103 mrem/hour = 0.103 rem/hr. Since the RPO is just outside the 30 centimeter zone from the Main Hoist, the criteria for posting the Refuel Platform Trolley as a High Radiation Area is met.
A (Radiation Area) is wrong because a person on the Trolley is expected to receive in excess of 100 mrem per hour whole body dose.
C (Level 1 Locked High Radiation Area) is wrong because the criteria for a Locked High Radiation Area is NOT met. The criteria for Level 1 Locked High Rad Area is a dose-rate of more than 1.0 rem/hour (1000 mrem/hr) o (Level 2 Locked High Radiation Area) is wrong because the criteria for a Locked High Radiation Area is NOT met. The criteria for Level 2 Locked High Rad Area is a dose-rate of more than 15.0 rem/hour (15000 mrem/hr)
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
~tion 3 Info .
Question Type: _ _. Multiple Choice I Status: i Active
~ays selecton test? No Authorized for practice? j'Jo Points: 1.00
\=:-.
Time to Complete: 2 I Difficult:~,,: '2.00 lSystem ID: 23106
. User-Defined ID: 23106 Cross Reference Number: NLSRO-1760-6 / 82-2 Able to determine High Rad Area posting required due to Topic:
dose I RO value: 3.2 SROValue: 3.7 KA..
Reference:
Comments:
. . Generic 2.3.12 General Data Technical Reference with RP-AA-460 I Revisio Revision 1--:::.
Number: n #: 19 Cognitive Level H r-E.:RA:~~ Yes or No or #) N --
10CFR55.43 (n/a forRO) 10CFR55.41 (b) 12
. Question History: (I.e. LGS !\lew NRC-05, OYS CERT-04)
Question Source: (I.e. !\lew, New Bank, Modified)
Revision History: Revision New History: (I.e. Modified distractor "b" to make plausible based on O~
review)_
Supplied Ref (If . None I
. appropriate): (I.e. ABN-##) I Excluded
Reference:
(I.e. ~one Ensure ON-## n()!provided)
~w KA Justification (if ! N/A required}: I .
. . Safety Function 9 --
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 4 10: 23045 Points: 1.00 LGS Unit 1 plant conditions are as follows:
- OPCON 5
- Fuel Shuffle Part 1 is in progress The RPO has just lowered a fuel assembly into the Core with the following indications:
- The "HOIST LOADED" light has extinguished
- The "SLACK CABLE" light is illuminated Subsequently a grid disturbance results in the following:
- 20 Station Startup Bus breaker Trips 10 Station Startup Bus Remains Energized
- 014 Emergency Diesel Generator fails to start
- All Other Emergency Diesel Generators function as designed WHICH ONE of the following describes status of the Unit 1 Refuel Platform AND the Main Hoist Grapple?
Unit 1 Refuel Platform Main Hoist GraQQiE2 A. No Power Available Remains Closed B. No Power Available Opens C. Power Available Remains Closed D. Power Available Opens Answer: A Answer Explanation:
ANSWER: No Power Available/Remains Closed: With a loss of the 20 Station Aux bus, the 12 Aux Bus will lose power. The Unit 1 Refuel bridge powered is supplied by 124C-R A, which is powered by the 12 bus. There is no auto swap to an alternate source, consequently the Unit 1 refuel bridge and Air compressors will lose power.
The Main Hoist Grapple is air operated, and will remain closed on a lose of air, even though there is no load on it ("HOIST LOADED" extinguished, "SLACK CABLE" illuminated)
OISTRACTORS:
No Power Available/Opens: See Answer above Power Available/Remains Closed: See Answer above Power Available/Opens: See Answer above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination i Question 4 Info . .
@uestiQ.n Tjp~: Multiple Choice .~---.
I Status: Active
~Iwa~s select on test? No
! Authorized for practice? No --
I Points: 1.00 .---
- Time toCom~lete:
.-~.
5 .--.
I Difficulty: 3.00
~mID: 23045 User-Defined 10: 23045 --
Cross Reference Number: NLSR00655.02 c::::=
ITopic: LGS Refuel platform~ower supply:
.RO value: RO 3.1 SRO Value: SRO~~.._.~ _ _..~~ . _ _ . - -
Reference:
295003 AK1.04 Comments: General Data r-=---. .
Technical Reference with Revision Number:
E-1, OS93.1.A InRevisio (COL) I
~ ... _
S97.0.M I Cognitive Level H PRA: (i.e. Yes or No or #) N 10CFR55.43 (n/a for RO) I RO 41.8 Question History: (i.e. LGS N/A NRC-05, OYS CERT-04) r-::--.~~.-~-.
II Question Source: (i.e. New, New I
Bank, Modified)
~sion History: Revision New History: (i.e. Modified distractor "b" to make I plausible based on OTPS review)
- Supplied Ref ( I f
- i None I appropriate): 0*e. ABN-##)
- Excluded
Reference:
(i.e. None I Ensure ON*## not provided)
~ow KA JustHication (if N/A required): .
I - - . - . - . -..
LGS NRC LORT2009 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 5 ID: 23088 Points: 1.00 PBAPS Unit 3 is in a refueling outage with plant conditions are as follows:
Core Shuffle Part 1 is in progress The '3A' Loop of RHR is in Shutdown Cooling Reactor Cavity Water Temperature is 110°F and steady The in-service RHR Heat Exchanger experiences severe fouling (High Pressure Service Water flow restrictions).
WHICH ONE of the following describes the change in the Wide Range Neutron Monitor (WRNM) indications AND the amount of DECAY H EAT generated by the Core?
Core Decay Heat Generation A. Up Up B. Up Remain the same C. Down Up D. Down Remain the same Answer: D Answer Explanation:
D (Down /Remain the same) is correct because the fouled HX will result in a higher Cavity water temperature which will add negative reactivity a lower indication on the W RNMs.
The decay heat will NOT change due to the change in temperature of the water.
A (up/up) is wrong because the WRNMs indication will go down with the rise in water temperature AND because the Decay heat rate will NOT go up.
B (up/remains the same)is wrong because the WRNMs indication will go down with the rise in water temperature C (down / up) is wrong because the Decay Heat Rate will NOT go up. The Decay Heat rate is dependent on power history and time from shutdown. Therefore, Decay Heat will NOT change due to water temperature. NOTE If time from HX fouling is considered, then over time the Decay Heat rate does go down.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 5 Info
~tionTy~ Multi[JIe Choice Status:
~.---~.. .
Active .. ..- . I Always select on test? No .~~~------.
Authorized for practice? No Points: 1.00 Time to Comelete: 3 Difficulty: 3.00
,System ID: 23088
-User-Defined ID: 23088 - . -..- ..-.-----.--.-
Cross Reference Number: BR040-1 I 295023-3 ..
Heat exchanger fouling results in what change in thermal Topic:
neutron population
~eference: 295014 AK2.07 Comments: i~eral Data I
! Technical Reference with Generic : Revisio I Revision Number: Fundamentals I n #:
Cognitive Level L t-pRA: (I.e. Yes or No or #) N
, 10CFR55.43 ~n/a for RO) 10CFR55.41(b) 7 I~estion History: (I.e. LGS New NRC-05, OYS CERT-04) -.
- Question Source: (Le. New, New Bank, Modified)
Revision History: Revision New - NRC examiner History: (I.e. Modified comment about the distractor 'Ibn to make significance of the change plausible based on OTPS on the WRNM indication review) being small. The reply to the comment was that the change in WRNM is small, however, it did not present a problem to the three validator that successfully answered this question. Question is
-=-----~.
satisfactory as is. I Supplied Ref (If None I appropriate): (I.e. ABN-##) I Excluded
Reference:
(i.e. Non, I Ensure ON-## not provided) -.
Low KA Justification (if N/A II required):
Safety Function 1 i i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 6 10: 23114 Points: 1.00 PBAPS Unit 2 plant conditions are as follows:
A total core off-load has been completed The Reactor Cavity to Fuel Pool Gates are installed Reactor Cavity water level is +474" and steady The Spent Fuel Pool water temperature 95°F and steady The Reactor Building Closed Cooling Water (RBCCW) system is supplying cooling water to the Fuel Pool Cooling (FPC) Heat Exchangers in accordance with AO 35.1-2 'RBCCW Backup to FPC' A transient causes the operating Unit 2 Drywell Chillers to lose electrical power (1T4 and 2T4 Load Centers de-energize).
WHICH Ot\IE of the following describes the impact of the de-energized Load Centers on the plant? (Assume NO Operator action)
A. Drywell is without cooling B. Fuel Pool Cooling Pump(s) will trip C. Reactor Cavity water level will lower D. Fuel Pool water temperature will rise Answer: 0 Answer Explanation:
o (Fuel Pool water temperature will rise) is correct because the PBAPS RBCCW system will automatically align to supply cooling water to the Drywell Chill Water System. This lineup will TAKE some RBCCW water away from the FPC HX which means that there will be less heat removal by the heat exchanger (and Fuel Pool water temperatures will go up).
A (Drywell is without cooling) is wrong because the RBCCW system will automatically align to the Drywell Chill Water system and therefore the Drywell will still have a source of cooling. NOTE For Limerick Generating Station, this would be the correct answer because the RBECW system will NOT automatically backup the Drywell Chill Water at Limerick (it is a manual action).
B (Fuel Pool Cooling Pumps will trip) is wrong because there is NO FPC Pump trip on loss of cooling water (NOTE - there is a trip on loss of Fuel Pool water).
C (Reactor Cavity water level will lower) is wrong because Reactor Cavity level will not be impacted by the RBCCW swap-over or the loss of the 1T 4 and 2T 4 Load Centers. The impact on level is plausible since the RBCCW back up of the Drywell Chill Water system will automatically cut off cooling to RWCU, however, without a source of heat (full core off-load),
even without cooling water RWCU wi" NOT get a high temperature condition and therefore will NOT isolate. With no heat load and no isolation of the RWCU system, there will be change in the Reactor Cavity water level.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination IQuestion 6 Info . -..- .
rauestionTy~ Multiple Choice -_._-_. ~.-.-
Status: Active
~wals select on test? No Autl:l.orized fOfErc:l.ctice? No .~-- ..
Points: 1.00 I Time to Complete: 3 Difficult~ 3.00 I-:System ID: 23114 User-Defined ID: 23114 Cross Reference Number: NLSR0503S-? / ?:.I4nnn-4S PBAPS - Impact on an auto swap of RBCCW to supply Topic:
Drywell Chill Water System I RO value_:__.._ _*. 3.3 SRO Value: 3.4 KA
Reference:
295018 AA 1.01 Comments: General.Data f--" .
Technical Reference with M-316 sht 1 ReviiiO Revision Number: M-327 sht 2 n #:61 E-154 sht 1 55 t-:;:-- .
1
- Cognitive Level H PRA: (Le. Yes or No or #) N 10CFR55.43 (n/a for ROt 10CFR55.41 (b) 7 Question History: (Le. LGS New
Question Source: (i.e. New, I New Bank, Modifiedt Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS
~vl§~L~_
Supplied Ref (If
, a[pro[)riateL(Le. ABN-##}
I None-Excluded
Reference:
(Le. None Ensure ON-##
f - : - - _.._ _.. not provided) ._.._._.
- Low KA Justification (if NfA I reguired):
Safety Function 8 I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 7 10:23046 Points: 1.00 LGS Unit 1 plant conditions are as follows:
Reactor Cavity water level is + 484" and steady "1A" RHR is in Shutdown Cooling "1 B" RHRSW heat exchanger is out of service, and is not expected to be returned to service until 2100 At 1300 the following occurs:
"1A" RHRSW HX inlet valve (HV-51-1F014B) fails closed and cannot be reopened WHICH ONE of the following describes the required action?
A. Immediately supend handling of fuel assemblies or control rods within the RPV B. Verify reactor coolant circulation by an alternate method By 1400 today C. Verify the availability of ONE alternate method of decay heat removal by 1400 today D. Verify the availability of TWO alternate methods of decay heat removal by 1400 today Answer: C Answer Explanation:
Answer: Verify the availability of an alternate method of decay heat removal by 1400 today: Correct:
I\lOTE: The canidate must determine that cavity water level is greater than 22 feet above the top of the flange.
1A RHRSW HX inlet valve failing closed, INOPs the A loop of SDC. Per TECH SPECS 3.9.11.1: One RHR Shutdown Cooling subsystem shall be operable and in operation, or within 1 hr. and once per 24 hrs verify an alternate method of decay heat removal is available in OPCON 5 with reactor vessel water level greater than 22 feet above the flange (+484" is greater than 22 feet above the flange).
Immediately supend handling of fuel assemblies or control rods within the RPV:
This is not correct, as cavity water level is greater than 22 feet above the flange, it would be correct if if water level was less than 22 feet above the flange per T.S. 3.9.8.
Verify reactor coolant circulation by an alternate method By 1400: This is not correct as while there is a loss of decay heat removal, there is no loss of coolant circulation. It would be correct if there was a loss of coolant circulation.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Verify the availability of IWQ alternate methods of decay heat removal by 1400 today: This is not correct as Reactor cavity water level is greater than 22 feet above the flange. It would be correct if water level was less than 22 feet above the flange per T.S.
3.9.11.2
- Question 7 Info _ _ _...,___
i Question Ty e: Multiple Choice _ _ _ _ ~ __.._ . _
- status:'~-----+A-:-ctive IAlways-s-e-Ie-ct-o-n tes_t?--:---"r-:-N-:-o_ _ _ _ _. _ _ _ _ _ _.
l Authorized for practice,-?_-+-I\l_oc~ _ _~" _ _~~ ___'_ _'_________-1 f_Po_i_nt_s:_ _._ _._ _--I-1:..:..=-::.___.__._____~..~_ _~ ..__._._ _ _ _ _-1 ITimetoComplet.e~:~___~ ___ ~__ ~__________~_ _ _ _ _~
Difficult : 4.00
~===
- System ID_:__. 23046 User-Defined ID: 23046 Cross Reference Number: NLSR01840.03 t--
Determine the required action for an RHR pump trip while in Topic:
Shutdown Cooling I RO value: 3.4 (2.7)
'SRO Value: 3.5 (2.7)
Reference:
295021 2.2.42 Comments: General Data
- 1 Technical Reference with T.S. 3.9.11.1 , Revisio !
~evision Number:
Cognitive Level T.S 3.9.11.2 H
in~
I PRA:(Le. Yes or No C>r: #) Y
. 10CFR55.43 (n/a for ROl 43.2, 4 3 . 3 - 1 Question History: (i.e. LGS LGS LORT BANK .
Question Source: (i.e. New, Modified Bank, Modified)
-=--.. ..--.
Revision History: Revision Q561139,changedto History: (i.e. Modified OPCON 5 distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None
~ropriate): (Le. ABN-##)
Excluded
Reference:
(Le. I None i Ensure ON-## not provided}
. I I
~.~~~.~~~
Low KA Justification (if . N/A re~qt.Jired): I I-r-*----'-----*~I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 8 10:23049 Points: 1.00 LGS Unit 2 plant conditions are as follows:
OPCON 5 Unit 2 is in a normal HVAC alignment SGO-76-206-3 "Refuel Floor Area-SGTS Slide Gate Damper" is locked open SGO-76-506-2 "Unit 2 Rx Encl-SGTS Slide Gate Damper" is closed The following occur simultaneously:
An irradiated component is moved near the Refuel Floor Exhaust Radiation monitors resulting in Refuel Floor Exhaust Radiation Monitors Reading 2.6 mr/hr.
A RWCU resin spill occurs in the Reactor Enclosure (RE) resulting in RE HVAC Exhaust rad level of 1.50 mr/hr.
WHICH ONE of the following describes the status of Reactor Enclosure and Refuel Floor HVAC based on the conditions above?
RF HVAC A. Unit 2 RE HVAC isolate RF HVAC isolates B. Unit 2 RE HVAC does NOT isolate RF HVAC isolates C. Unit 2 RE HVAC isolates RF HVAC does NOT isolate O. Unit 2 RE HVAC does NOT isolate RF HVAC does NOT isolate Answer: B Answer Explanation:
Unit 2 RE HVAC does NOT isolate/RF HVAC isolates, Correct: Radiation conditions in the RE would not cause an isolation as SGO-76-506-2 is closed. (If the SGO was open 1.50 MR/hr would result in a RE isolation). Refuel Floor Rad above 2.0 mr/hr will result in a Refuel Floor HVAC isolation as SGO-76-206-3 is open, but this RF signal will not result in a Unit 2 RE isolation.
OISTRACTORS:
Unit 2 RE HVAC isolates/RF HVAC isolates: Incorrect, Radiation conditions in the RE would not cause an isolation as SGO-76-506-2 is closed. (If the SGO was open 1.50 MR/hr would result in a RE isolation). Partially correct, Refuel Floor Rad above 2.0 mr/hr will result in a Refuel Floor HVAC isolation as SGO-76-206-3 is open.
Unit 2 RE HVAC isolates/RF does NOT HVAC isolates:Radiation conditions in the RE would not cause an isolation as SGO-76-506-2 is closed. (If the SGO was open 1.50 MR/hr would result in a RE isolation). Additionally, Refuel Floor Rad above 2.0 mr/hr will result in a Refuel Floor HVAC isolation as SGO-76-206-3 is open.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial licensing Examination Unit 2 RE HVAC NOT isolates/RF HVAC does NOT isolates: Partially correct, Radiation conditions in the RE would not cause an isolation as SGD-76-506-2 is closed.
(If the SGD was open 1.50 MR/hr would result in aRE isolation). Incorrect: Refuel Floor Rad above 2.0 mr/hr will result in a Refuel Floor HVAC isolation as SGD-76-206-3 is open.
i Question 8 Info IQuestion Type: Multiple Choice i
. Status: Active Always select on test? No .-.
~orized for eractice? No I Points: 1.00 lTime to ComQlete: 4
- Difficult~: 3.00 I S~stem 10: 23049 -
i User-Defined 10: 23049 I Cross Reference Number: NLSR00720.04 I .
I Topic: RE & RF hvac resj20nse to Hi Had
- RO value:
i SRO Value:
3.8 3.9 KA
Reference:
295034 EA2.01 I~ I Comments:
I Technical Reference with Revision Number:
General Data E-474 l Rev #: !
LQognitive Level H I PRA: (I.e. Yes or No or #) N i 10CFR55.43 {n/a for RO)
Question History: (I.e. LGS NRC-05, OYS CERT-04)
. Question Source: (i.e. New, 41.7 ILT Cert Exam 2005 Modified
--1 Bank, Modified)
Revision History: Revision Changed to RE ENC History: (I.e. Modified Isolation does not occur distractor "b" to make to illustrate LGS/PBAPS I plausible based on OTPS difference review}
Supplied Ref (If None I aeeropriatel: (I.e. ABN-##)
i Excluded
Reference:
(i.e. None i Ensure ON-## not provided)
I Low KA Justification (if N/A i required) i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 9 10: 23053 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5
- Cavity Flood up is in progress using the "1A" Core Spray pump A leak develops in the reactor coolant system which causes reactor level to drop to -138" WHICH ONE of the following identifies the response of the "1A" Core Spray Pump and the Inboard (HV52-1 F005) and Outboard (HV-52-1 F004A) Injection Valves?
"1 A" Core Spray PUIIlQ Injection Valves A. Continues to run Automatically Open B. Continues to run Must be Manually Opened C. Trips and Automatically Restarts Automatically Open D. Trips and Automatically Restarts Must be Manually Opened Answer: C Answer Explanation:
ANSWER: Trips and Automatically Restarts/ Automatically Opens: Core sprays pumps will trip and automatically restart on -129", Injection valves will automatically open with initiation signal present and Rx pressure below 455 psig OISTRACTORS:
Continues to run / Automatically Open: Incorrect as Core sprays pumps will trip and automatically restart on -129" Partially correct as Injection valves will automatically open with initiation signal present and Rx pressure below 455 psig Continues to run/Must Be manually Opened: Incorrect as Core sprays pumps pumps will trip and automatically restart on -129 ", and injection valves will automatically open with initiation signal present and Rx pressure below 455 psig Trips and Automatically Restarts/Must be Manually Opened: Partially correct as Core sprays pumps will trip and automatically restart on -129". Incorrect as injection valves will automatically open with initiation signal present and Rx pressure below 455 psig
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial licensing Examination
- Quesbull 9 Info I Question Type: Multiple Choice i Status: Active
~ways select on test? No ---------
Authorized for practice? No Points: 1.00 The to Cornplete: 3 I, Difficulty: 4.00 i System ID: 23053 i User-Defined ID: 23053 i Cross Reference Number: NLSR00350L.02 r== CS Pump and valve response to lowlevel during OPCON 5 iTopic:
IRO value: 4.2 -------
Reference:
295031 EK2.03 Comments: General Data Technical Reference with E-21-1040-E- Rev#:
Revision Number: 005 Sht 1 E-164Sht2 and 5
_ I
! Cognitive Level L
~A:(i.e. Yes or No or#l N 10CFR55.43 (n/a for RO) 41.7
, Question History: (i.e. LGS LGS Bank
I Question Source: (i.e. New, Modified i Bank, Modified)
~~vision History: Revision Changed to Core Spray History: (i.e. Modified running prior to LOCA distractor "b" to make
- plausible based on OTPS
- reviewL Supplied Ref (If Non, appropriate}: (i.e. ABN-##)
Excluded
Reference:
(i.e. None
, Ensure ON-## not provided)
I Low KA Justification (if N/A
- required): _ __
I I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 10 10: 23116 Points: 1.00 LGS Unit 2 plant conditions are as follows:
- OPCON 5 Control Rod Stroking is in progress for Control Rod 46-47 Unit 2 Instrument Air Header develops a leak and depressurizes to 0 psig WHICH ONE of the following describes the response of Control Rod 46-47 Scram Inlet and Outlet Valves, and the Unit 2 CRD Flow Control Valve?
Control Rod 46-47 Unit 2 Scram Inlet and CRD Flow Outlet Valves Control Valve A. Open Fails Open B. Open Fails closed C. Remain Closed Fails Open D. Remain Closed Fails Closed Answer: B Answer Explanation:
Answer: OPEN / Fails Closed: Correct, Low Instrument Air pressure causes CRD HCU Scram Valves to open. Additionally, the flow control valve FAIL CLOSED on a loss of actuating air pressure.
Oistracters:
Remain Closed / Fails Open: Incorrect, Low Instrument Air pressure causes CRD HCU Scram Valves to open. Partially correct, the flow control valve FAIL CLOSED on a loss of actuating air pressure.
Remain Closed / Fails Closed: Incorrect, Low Instrument Air pressure causes CRD HCU Scram Valves to open, and the flow control valve FAIL CLOSED on a loss of actuating air pressure.
Answer: OPEN /Fails Open: Partially correct, Low Instrument Air pressure causes CRD HCU Scram Valves to open. Incorrect the flow control valve FAIL CLOSED on a loss of actuating air pressure.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 10 Info C-=-"--'
Question Type: i Multiple Choice Status: Active ,----, ,
~Iways select,on test? No .. _
Authorized for practice? ,No Points: .00
~,to Complete: 2
~jculty: 3.00 System ID: 23116
. User-Defined ID: 123116 Cross Reference Number: NLSROOO~Q.02 Describe the effect of Instl It air pressure at 0
!Topic:
impact on CRD - - ..- ..-
RO value: 3.3 .
Reference:
295019 Comments: General Data i1 Technical Reference with i Revision Number:
ON-107 I Revisio
- n #:
j Cognitive Level L I PRA: (i.e. Yes or No or #) N 10CFR55.43 (nla for RO) RO 41.7 Iouestion History: (Le. LGS LGS BANK II NRC-05, OYS CERT-04t ,-
Ii Question Source: (Le. New, Bank
- Bank, Modified) . -...- ..- ..
~ision History: Revision Changed to conditions History: (i.e. Modified appropriate to OPCON 5 distractor "b" to make plausible based on OTPS review) r--::-
Supplied Ref (If None appropriate): (i.e. ABN-##) i Excluded
Reference:
(i.e. M-0046 sht 2 indentifying Ensure ON-## not provided) FCVs fail closed on loss of Air. Note: M-0046 sht 2 can be supplied if "FC" and notes are removed II Low KA Justlllt;d.li, (if N/A reqLliredh
'/
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial licensing Examination 11 ID: 23052 Points: 1.00 LGS Unit 2 plant conditions are as follows:
Plant Monitoring System (PMS) is inoperable Control Rod 26-27 inadvertently scrams WHICH ONE of the following can be used to confirm that control rod 26-27 has fully inserted?
A. "XX" (two X's) on the Four Rod Display.
B. Green "IN" light is lit on the Full Core Display.
C. ". _H (two dashed lines) on the Four Rod Display.
D. Blue "SCRAM" light is lit on the Full Core Display.
Answer: B Answer Explanation:
ANSWER: Green "IN" light is lit on the Full Core Display: The full in and full out lights on the Full Core Display continue to function with PMS and RDCS inoperable.
DISTRACTORS:
"XX" (two X's) on the Four Rod Display: Incorrect, This indicates a Data fault for the rod in question, BUT does not indicate control rod position.
"- -" (two dashed lines) on the Four Rod Display: Incorrect, this indication on the Four Rod Display indicates an odd numbered reed switch is made up.
Blue "SCRAM" light is lit on the Full Core Display: Incorrect, the blue "SCRAM" light on the Full Core Display indicates that the scram valves are open, BUT does not indicate control rod position IQuestion 11 Info
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination l~ralData Technical Reference with I Revision Number:
GP-11 IRevision #:
- COQnitive Level L ~~~-
PRA: (i.e. Yes or No or #) N !
,-!QCFR55.43 (n/a for RO} I 41.6 ~-
I Question History: (Le. LGS I LGS ILT Bank I NRC-05, OYS CERT-04)
[ Question Source: (Le. New, , Bank i~k, Modified)
Revision History: Revision Bank History: (Le. Modified distractor "b" to make
~~:~~Ie based on OTPS-l Supplied Ref (If i None appropriate): (i.e. ABN-##)
=l Excluded
Reference:
(i.e. None Ensure ON-## not provided) i LOW RAJ IstffiCatlOn (if N/A I required) I I i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 12 10: 23113 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5 A fire breaks out in the Energized Refuel Bridge and Trolley Power Center Cabinet The Fire has been reported to the MCR SE-8 "Fire", has been entered WHICH ONE of the following is the preferred fire suppression agents to effectively extinguish this fire, and which additional action that should be should be taken?
A. Portable CO2 Extinguisher, Activate Fire Brigade B. Portable CO 2 Extinguisher, Dispatch Fire Brigade Leader, Fire Brigade Activation is not required C. Water Hose Reel, Activate Fire Brigade D. Water Hose Reel, Dispatch Fire Brigade Leader, Fire Brigade Activation is not required Answer: A Answer Explanation:
ANSWER: Portable CO2 Extinguisher, Activate Fire Brigade:
CO 2 Extinguisher are available on the Unit 1 Refuel Floor (by 579 door, North wall of RX Enc, By 581 door, and by South Stack Air lock), and are effective on the Class C fires (energized electrical). SE-8 requires activation Fire Brigade based on report of Fire Fire Classifications are:
- Class A , Common combustibles
- Class B, Flammable liquids
- Class C, Energized electrical equipment
- Class D, Combustible metals As the bridge is "energized: this fire is a Class "C" fire. IF the bridge were de-energized it would be "A" SE-8 requires activation of the Fire Brigade based on report of Fire DISTRACTORS:
Portable CO2 Extinguisher, Dispatch Fire Brigade Leader, Fire Brigade Activation is not required: Partially correct, Portable CO 2 Extinguishers are available on the refuel floor. Incorrect, Fire Brigade Activation is not required, this would be true for a Fire Alarm only, but as fire was reported to MCR brigade activation is requried,
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Water Hose Reel, Activate Fire Brigade: Partially correct, SE-8 requires activation of the Fire Brigade based on report of Fire. Incorrect Water hose reel is available. but as the bridge is "energized: this fire is a Class "C" fire. IF the bridge were de-energized it would be "A" Water Hose Reel, Dispatch Fire Brigade Leader, Fire Brigade Activation is not required: Incorrect. Incorrect Water hose reel is available. but as the bridge is "energized: this fire is a Class "C" fire. IF the bridge were de-energized it would be "A".
Fire Brigade Activation is not required. this would be true for a Fire Alarm only. but as fire was reported to MCR brigade activation is requried.
IQuestion 12 Info --
Question Type: Multiple Choice I Status: Active
~~elect on test? No r Authorized for practice? No I Points: 1.00
- Time to Complete: 2 I Difficultr 2.00 1---
I System ID: 23113 IUser-Defined ID: 23113 I Cross Reference Number: NLSR00685L.02 Fire in the Energized Refuel Bridge Cabinet. I fire ITopic: suppression i RO value: 2.8 IsROValue: 3.4 .-.--
Reference:
600000 AK3.04 Comments: General Data I' Technical Reference with I F-R-700 Revisio I Revision Number: F-R-708 n #:
I SE _ .. _.
i Cognitive Level L
! PRA: (i.e. Yes or No or #) Y 110CFR55.43 (n/a for RO) 41.10 I Question History: (i.e. LGS I New NRC-05, OYS CERT-04)
Question Source: (i.e. New, I New I
-I Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make i plausible based on OTPS review) I I Supplied Ref (If NONE I a~~ropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e.
I Ensure ON-## not provided)
SE-8 ~
I Low KA Justification (if N/A
- I required):
i II I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 13 10:23056 Points: 1.00 LGS Unit 2 plant conditions are as follows:
Reactor coolant temperature is 95°F The "2B" loop of RHR is in Shutdown Cooling (SOC), with the "OB" RHRSW pump in service The "2A" and "2C" RHR pumps are unavailable due to 021 and 023 bus work "2B" and "20" Core Spray pumps are OPERABLE for ECCS An electrical fault causes The "OB" RHRSW pump to trip on overcurrent.
WHICH ONE of the following describes the ability to restore decay heat removal using the RHR system?
A. RHR SOC cannot be restored with the current conditions.
B. SOC can be restored with the "00" RHRSW pump and the "2B" heat exchanger.
C. SOC can be restored with the "OA" RHRSW pump and the "2B" heat exchanger.
O. SOC can be restored with the "00" RHRSW pump and the "2A" heat exchanger.
Answer: B Answer Explanation:
ANSWER: SOC can be restored with the "00" RHRSW pump and the "28" heat exchanger: Correct, With the configuration given (2B RHR and OB RHRSW pump in service) the 2B RHRSW heat exchanger is in service. The 00 RHRSW pump can be started and aligned to the 2B Heat exchange.
DISTRACTORS:
RHR SOC cannot be restored with the current conditions: See Above SOC can be restored with the "OA" RHRSW pump and the "28" heat exchanger:
Incorrect, OA RHRSW pump cannot be aligned to the 2B heat exchanger.
SOC can be restored with the "00" RHRSW pump and the "2A" heat exchanger:
Incorrect Although available, the 00 RHRSW pump cannot be lined up to the "2A heat exchanger, additionally, the 2A and 2C RHR pumps (which can be lined up to the 2A heat exchanger) are out od service.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination IQuestion 13 Info Question Type:
Status:
~=---:- ______--Ir2_B_S_D_C~in_service loss of OB RHRSW pum~ _ _ _ --j 3.S
-.-.-.------1-:--:-
3.6 KA
Reference:
205000, K1.15
-*-*-*-----+,--."'-"-~-----~-__:_=_-----------d Comments: General Data Technical Reference with S5"'-1.-=-a-::.Bo--a-nd---r\-:R=-e-visio Revision Number: M-S1 P&ID~ n #:
~ognitive Level H ----1
- PRA: (i.e. Yes or No or #) N i 10CFRSS.43 (n/a for RO) RO 41.4 I Question History: (i.e. CGS 2008 LSRO Requal NRC-OS, OYS CERT-04)
Question Source: O.e. New, Modified Bank, Modified_)_. _ _ _-I---_~
Revision History: Revision Changed from RHR hxchr History: (i.e. Modified inlet valve failure to distractor "b" to make RHRSW pump trip
. plausible based on OTPS review) ______-j-:-:_ _ _ _ _ _ _ _ _--j Supplied Ref (If None apQI:2£1:i..ate): (i. e. ABN-#_#-'----+--,-_ _~._. _ _ _ ____l Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 14 10: 23103 Points: 1.00 PBAPS Unit 2 is in a refueling outage with the following plant conditions:
MODE5 Core Shuffle Part II is complete Control Rod stroking is in progress Wide Range Neutron Monitor (WRNM) indications are as shown below:
WRNM Countrate CQPS) Reactor Period (seconds) I A 105 Infinite (oo)
B Bypassed BYQassed -=J C 120 Infinite (oo) I D 110 Infinite (ex>>
E Bypassed BYQassed L-£G IT_~I-I___1_1_0~_
95 100 E___ln_fl_n_lteJ:::)_~
Infinite (e<>>
Infinite (00)
.. ~
Subsequently, the following WRNM indications are noted:
WRNM Reactor Period (secon4>D
~A ___ Infinite =)1 Bypassed Positive (+<-1_0_ _ _-4 r----:=---+----=::---'-'=---,----+-~_--=-~N_'_'e=-,;lative (=) 200 _ ~--.-J
~-~~~--+---_~l~~~~~----~----~B~y£assed-----~
r--_.__:::-___-t-_____ ~_________!___~----I-nf-inite (=) I r---:~--+_--..~=_=_-----+-----. Negati~~1 00 ~
Positive (+) 15 __ ---.J WHICH ONE of the following describes the plant response to the change in WRNM indications?
A. 'A' half scram ONLY B. 'B' half scram ONLY C. NO impact on RPS D. Full Scram Answer: D Answer Explanation:
ANSWER: (Full Scram) is correct because the 'C' WRNM inputs into the 'N RPS logic and the 'H' inputs into the 'B' RPS. Since the Reactor Period trip setpoint is + 19, both the C and H WRNMs provide a trip of the A & B RPS circuitry which results in a Full Scram condition. NOTE Limerick does NOT have WRNMs or an RPS trip on low Reactor Period.
DISTRACTORS:
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination (NO impact on RPS) is wrong because the RPS function is active during MODE 5 conditions (and at times required by Tech Specs).
( 'A' half scram ONLY) is wrong because there will also be a 'B' RPS half scram as well
( 'B' half scram ONLY) is wrong because there will also be an 'A' RPS half scram as well I
.Question 14 Info Question T e:
Status:
! Always select on test?
! Authorized for ractice? I No Points: 1 Time to Com lete: 3 Difficult :
I System 10:
3.00
- =
- ::::::::::--===========::=:========--.~==.=-~-===~= ~
231
..-== . =======l 1 User-Defined ID:----+.:::2~3*..;.1*~--.----.--.-~-----------...j Cross Reference Number: NLSRO-5060C-1 I 295023-3 IPBAPS -- determine how =====-:=====::::::;:::=;====1 spiking on vario~us WRNMs Topic*
i impacts RPS {scram or half scram}
f'Ro value~:--* 3.3 iSRO Value: 3.4
~
Reference:
212000 K5.02 Comments: II General Data Technical Reference with M-1-S-54 1 Revisio Revision Number: ' n #:
Ir Coqnitive Level H II PRA: (Le. Yes or No or #) N ffOCFR55.43 (n/a for Rei) 10CFR55.41 (b) 5 Question History: (Le. LGS New NRC-05, OYS CERT-04)
- Question Source: (Le. New, New Bank, Modified)
Revision History: Revision History: (Le. Modified distractor "b" to make I
plausible based on OTPS r:.eview) I I" Supplied Ref (If None
~c!pp~(lJ?riate): (Le. ABN-##} -
Excluded
Reference:
(Le. I .~.----~-
None L~D.'§'lJ~.ON-## not provided)
- -1 I Low KA Justification (if i required}:
I I
N/A I
I Safety Function 7____J I I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial licensing Examination 15 10:23058 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5 All SRMs are Operable Core Shuffle Part 1 is in progress Control Rod withdraw to support uncoupling is occuring in offloaded cells A short to ground electrical fault results in a loss of 1AY160 (RPS/UPS power) electrical bus.
WHICH ONE of the following describes the effect on the ability to continue fuel moves, ANO the ability to withdraw Control Rods in OFFLOAOEO cells?
Fuel Moves Control Rod.Withdraw A. CAN occur CAN occur in "8" and "0" core quadrants only in any core quadrant
- 8. CAN occur CAN occur in "8" and "0" core quadrants only in "8" and "0" core quadrants only C. CANNOT occur CAN occur in any core quadrant in any core quadrant O. CANNOT occur CANNOT occur in any core quadrant in any core quadrant Answer: C Answer Explanation:
ANSWER: Fuel moves CANNOT occur in any core quadrant I Control Rod withdraw CAN occur in any core quadrant: Correct, the loss of 1AY160 will reult in a loss of power to the 1A and 1 C SRMs. Tech Spec 3.9.2 requires that an SRM be operable in the quadrant where the core alteration in being performed, and the face adjacent quadrant.
Fuel moves in the "8" quadrant would require 1A or 1C SRM to be operable. Fuel moves in the 0 quadrant would requires 1A or 1C SRM to be operable.
Control Rod withdraw in OFFLOAOEO cells is not considered a core alteration, and therefore can continue continue in any core quadrant with the two remaining operable SRMs.
OISTRACTORS: Fuel moves CAN occur in B & 0 core quadrants only I Control Rod withdraw CAN occur in any core quadrant: SEE A80VE Fuel moves CAN occur in B & 0 core quadrants only I Control Rod withdraw CAN coccur in B & 0 core quadrants only: SEE A80VE Fuel moves CANNOT occur in any quadrant I Control Rod withdraw CANNOT occur in any quadrant: SEE ABOVE
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial licensing Examination I Alwa~seleGt o_n_te-:s_t?~--t~ _ _ _ ----------~-----__1 Authorized for practice? No Points: 1 Time to Com lete: 2 IDI'ffICU It:r:
I System ID:
3.00 23058 I User-Defined ID: 23058 Cross Reference Number: I\jLSR00655L.Ol t---
ILoss of 1AY160 , SRM loss of power, impact on fuel moves Topic:
I and CRD movement IRO value: 2.6 SRO Value: 2.8 KA
Reference:
215004 K2.01 Comments: i General Data Technical Reference wit~E-"1AY160 / Revisio Revision Number: Tech Spec n #:
i 3.9.2
- 3.9.10.2 Cognitive Level H i I PRA: (i.e. Yes or No or #) N I /10CFR55.43 (n/a for RO) 43.2 II Question History: (i.e. LGS New
- NRC-05, OYS CERT-04) i Question Source: (i.e. New, i New Bank, Modified) I Revision History: Revision History: (i.e. Modified I New distractor "b" to make I plausible based on OTPS
~view) . I .._-_.. ~-
- Supplied Ref (If I None L§f.l.2f'.o~riate}: {I.e. ABN-##)
II
~
Excluded
Reference:
(I.e. None Ensure ON-## not provided)
II Low KA Justification (if I N/A i required): L i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 16 ID:23104 Points: 1.00 ATTACHMENT 1 PBAPS Unit 2 is in a refueling outage with plant conditions as follows:
Core Shuffle Part II is almost complete Refuel Platform is currently over the Spent Fuel Pool with a new Fuel Assembly grappled in the 'Full Normal Up' position The Following is Observed:
Refuel Floor Area Radiation Monitors (ARMs 3.7, 3.8, 3.9, and 3.10)
Local alarm horns simultaneously start sounding Local alarm lights are lit Auxiliary units indicate as shown on ATTACHMENT 1 Refuel Platform ARM (AM-2) indicates as shown on ATTACHMENT 1 Fuel Pool System Instrument Rack 20C075 Alarm as shown on ATTACHMENT 1 WHICH ONE of the following describes the required actions of the Refuel Platform crew?
A. Immediately evacuate the Refuel Floor in accordance with GP-15 'Local Evacuation'.
B. Notify the control room of the ARM issues and continue the Fuel Assembly move in accordance with FH-6C 'Core Component Movement Core Transfers'.
C. Notify the control room of the refuel floor high radiation conditions and to enter the TRIP procedure T-103 'Secondary Containment Control'.
D. Land the grappled Fuel Assembly at the closest available Fuel Pool location AND then evacuate the Refuel Floor in accordance with FH-74 'Actions in Response to an Unexpected Loss of Fuel Pool, Reactor Cavity, or Equipment Storage Pool Water Inventory'.
Answer: B Answer Explanation:
C is correct because there is NO high radiation condition on the refuel floor (multiple Refuel Floor ARMs failing.) All four of the Refuel Floor ARMs (NOT the Refuel Platform AM-2) are powered from the same power supply (20Y034-03 powers the 'Indicator & Trip Units'). When the Indicator and Trip unit loses electrical power, then the local ARM Auxiliary Unit will alarm (light and horn) if the local electrical power supply is unaffected.
The loss of the single power supply will cause the four ARMs to alarm (with a zero rad level indication on the meter). The failure of the ARMs is substantiated by the normal reading on the Refuel Platform ARM (AM-2) and the lack of alarm from the Fuel Pool Radiation Monitor (no alarm up on 20C075). NOTE - Peach Bottom has a Fuel Pool Radiation Monitor that alarms on the Fuel Pool System Instrument rack on High Radiation conditions; however, Limerick does NOT have a Fuel Pool Radiation Monitor
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial licensing Examination A is wrong because there is no high radiation condition on the refuel floor and no reason to evacuate.
B is wrong because T-1 03 is NOT entered for failure of the ARMs - there is NO challenge to containment. .
o is wrong because there is no reason to evacuate (FH-74 is NOT entered on ARM failure).
Question 16 Info
~uestion TYQe: Multiple Choice Status: Active
[Afways select on test? 'No ~-------- -
I Authorized for ~ractice? No
- Points: 1.00 Time to Complete: 6 I Difficulty: 4.00 ISystem 10: 23~.
I I User-Defined 10:
Cross Reference Number:
23104 NLSRO-5063C-3 / 295023-7 PBAPS Use ARMs 1 Fuel Pool Rad Monitor 1 Refuel Bridge Topic:
ARM to determine if evacuation is required
Reference:
-=----_. 233000 G 2.1 .45 Comments: General Data
- Technical Reference with Revision Number: I M-1-S-56 i Revisio n #:
~i!ive Level H ~
PRA: (i.e. Yes or No or #) N
- 10CFR55.43 (n/a for RO) 10CFR55.41 (b) 7
~uestion 10CFR55.43(b) 5 History: (i.e. LGS New I NRC-05, OYS CERT-04)
Question Source: (Le. New, New Bank, Modified)
Revision History: Revision 6/14/10 NRC examiner History: (Le. Modified asked to have answer
- distractor "b" to make reworded to include I plausible based on OTPS notification of Control review) Room. Question is sat.
I Supplied Ref (If Attachment 1 Lappropriate ):~AB N-##) .
I Excluded
Reference:
(i.e. None
! Ensure ON~## not ~rovided)
I Low KA Justification (if
- N/A
- required}:
I Safety Function 9 I
I IL
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 17 10: 23059 Points: 1.00 LGS Unit 2 plant conditions are as follows:
OPCON 5 Reactor Mode Switch is in "REFUEL" All control rods are fully inserted Refuel Bridge is over core location 37-26, and is ready to raise a fuel bundle The following occurs simultaneously:
Control Rod 14-55 is given a continuous withdrawal signal Refuel Platform raises fuel bundle at location 37-26 Subsequently, the following indication are observed on the Refuel Platform:
Reverse Stop # 1 Rod Block #1 Rod Block #2 NO other indication are observed on the Refuel Platform WHICH ONE of the following describes a failed interlock, and the required action?
Failed Required lnt~lQ<:<K Action A. Fuel Hoist Interlock Place the equipment in a safe condition per S97.0.M B. Fuel Hoist Interlock Place the equipment in a safe condition per ON-120 C. Reverse Stop #2 Place the equipment in a safe condition per S97.0.M D. Reverse Stop #2 Place the equipment in a safe condition per ON-120 Answer: A Answer Explanation:
The following list all interlocks noted in question:
INTERLOCK STATUS DISPLAY INITIATING CONDITIONS -*-1
-BRIDGE NEAR OR OVER CORE I ROD BLOCK #1 AND
-ANY HOIST FUEL LOADED
+~*---Bc=R-ID-GE N EAR OR OVER-C-=O:-:R,...."E,..-----I ROD BLOCK #2 I AND I -ANY HOIST FUEL LOADED
=--=-------'
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination IIBRIDGE~EVERSE
-BRIDGE NEAR OR OVERCOREl STOP AND L #1 -ANY HOIST FUEL LOADED AND
-ANY ROD NOT FULL IN
~----------------~-~----- ~~~~---~
-BRIDGE NEAR OR OVER CORE BRIDGE REVERSE STOP AND
. . I:BRIDGE NEAR OR OVER CORE FUEL HOIST INTERLOCK AND
-MAIN HOIST FUEL LOADED AND
. .. . -ANY ROD NOT FULL IN
. .~ _ _ _ _- J ANSWER: Fuel Hoist Interlock f Place the equipment in a safe condition per S97.0.M: Correct with a control rod withdrawn, and the grapple loaded over the core, Fuel hoist interlock should have occured. Additionally, the required action is contained in S97.0.M DISTRACTORS:
Fuel Hoist Interlock f Place the equipment in a safe condition per ON-120": Partially correct, while this would constitute a Fuel Hoist Interlock failure, ON-120 "Fuel Handling Problems, does not provide direction for an interlock failure.
Reverse Stop #2 f Place the equipment in a safe condition per S97.0.M> Incorrect, this does not constitute an interlock failure as Bridge Reverse Stop #2 does not occur with the RX mode switch in Refuel. Partially correct, as the the required action is contained in S97.0.M Reverse Stop #2 f Place the equipment in a safe condition per ON-120: this does not constitute an interlock failure as Bridge Reverse Stop #2 does not occur with the RX mode switch in Refuel. Additionally ON-120 "Fuel Handling Problems, does not provide direction for an interlock failure.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination I Question Tl'!2 e : Multiple Choice --
I1r tus Always: select on test?
- Authoriz_E~d forQ!actice?
Active No No I Points: 1.00 i Tim~to C°rllplete: 3
- Difficulty: 3.00
!System ID: '23059 luser-Defined ID: 123059 I Cross Reference Number: NLSR00766.13 I
I I Response to rod wid signal with the hoist loaded over the
[Topic: I core ------ --
I RO value: 3.3 iSRO Value: 4.1
Reference:
?:i400o.K4.01 Comments: General Data II Technical Reference with Revision Number:
S97.0.M I Revisio I n #:
Cognitive Level H PRA: (Le. Yes or No or #) N 10CFR55.43 (n/a for RO) 43.5
. Question History: (Le. LGS NEW NRC-05, OYS CERT-04)
Question Source: (i.e. New, NEW Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS
! review)
~uPPlied Ref (If None appropriate): (Le. ABN-##)
- Excluded
Reference:
(Le. None I Ensure ON-## not provided)
I Low KA Justification (if N/A reqQired):
I I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 18 10: 23061 Points: 1.00 ATTACHMENT 2 LGS Unit 1 plant conditions are as follows:
10 and 20 Station Aux Buses are both energized All 4 KV buses are powered from their normal Safeguard Buses The 10 Station Aux Bus is lost due to a transformer fault.
WHICH ONE of the following describes the status of the Unit 1 4KV buses and Emergency Diesel Generators (EDG) five (5) minutes later? (assume no operator action)
Unit 1 4KV Bus Power Emer~ncy Diesels Runnil19 A. All buses powered from Only D11 and D13 the 201 Safeguard Bus B. All buses powered from No Diesels are running the 201 Safeguard Bus C. Only D12 and D14 buses Only D11 and D13 powered from the 201 Safeguard Bus.
D. Only D12 and D14 buses No Diesels are running powered from the 201 Safeguard Bus Answer: A Answer Explanation:
ANSWER: All 4 KV buses are powered from the 201 Safeguard Bus I Only 011 and 013 EOGs are running: Correct: Normal Bus alignment is as follows:
D12 and D14 powered from the 201 Safeguard bus, aligned to the the 20 Station Aux Bus D11 and D13 powered from the 101 Safeguard bus, aligned to the the 10 Station Aux Bus.
On a loss of the of the 10 Station Aux Bus the D11 and D13 buses will experience undervoltage, and auto swap to the 201 Safeguard bus. Additionally the associated DG will receive a start signal, but the DG will not supply the bus as the autoswap to the 201 Safeguard bus occurs first.
Oistractors:
All 4 KV buses are powered from the 201 Safeguard Bus. No EOGs are running: See above Only 012 and 014 buses are powered from the 201 Safeguard Bus I Only 011 and 013 EOGs are running: See above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 012 and 014 buses are powered from the 201 Safeguard Bus. No EOGs are running: See above Question 18 Info i Question Type: Multiple Choice Status: Active LAlways select on test? No
! Authorized for practice? No
. Points: 1.00 Time to ComQlete: 6 Difficulty: 4.00 i System 10: 23061 i User-Defined 10: 23061 ..- -..
I Cross Reference Number: NLSR00655L.03 ITopic: Refuel, 10 Station Aux Bus lost, 4KV and DG response
. RO value: 3.2 ..- -..- -..- -...- -..
ISRO Value: 3.2 KA
Reference:
Comments:
262001 A3.02
~I General Data Technical Reference with E-1 Revisio
- Revision Number: E-10 n #:
1S92.9.A f Cognitive Level PRA: (I.e. Yes or No or #)
(COL)
H Y
- 10CFR55.43 (n/a for RO) RO 41.7 I Question History: (i.e. LGS 05-LSRO CERT
Question Source: (I.e. New, Bank Bank. Modified)
Revision History: Revision Bank History: (I.e. Modified distractor "b" to make
- plausible based on OTPS i review)
I Supplied Ref (If E-1 i appropriate): (i.e. ABN-##)
- Excluded
Reference:
(I.e. . None i Ensure ON-## not provided)
I
. N/A I Low KA Justification (if i required): I i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 19 10: 23112 Points: 1.00 PBAPS Unit 2 is in a refueling outage with plant conditions as follows:
Control Rod 46-31 is being withdrawn to support Control Rod Drive replacement The Control Rod Blade becomes uncoupled from the Control Rod Drive and remains full in The Control Rod Drive is withdrawn to position 48 The Control Rod Blade drops until seated in bottom of the guide tube WHICH ONE of the following correctly identifies the components that limit Control Rod Blade speed during this rod drop accident?
A. Velocity Limiter AND Guide Tube B. Guide Tube AND Bellville Washers C. CRD Mechanism Buffer Orifice AND Velocity Limiter D. Bellville Washers AND CRD Mechanism Buffer Orifice Answer: A Answer Explanation:
A (Velocity Limiter AND Guide Tube) is correct because the velocity limiter works in conjunction with the Guide tube to perform the function of a piston. For the velocity limiter to be effective, it most operate inside a cylinder of appropriate size (Guide Tube)
B (Guide Tube and Bellville Washers) is wrong because the bellville washers do nothing to slow down a dropped rod (however, the washers will work to slow a rod that is scramming into the core)
C (CRD Mechanism Buffer Orifice AND Velocity limiter) is wrong because the CRD Mechanism Buffer Orifice will not slow down a dropped rod (however, the orifice will work to slow down a rod that is scramming into the core) o (Bellville Washers AND CRD Mechanism Buffer Orifice) is wrong because neither the CRD Mech Buffer Orifice or the Bellville washers will work to slow a dropped control rod.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Exam ination i Question 19 Info i Question T~ __. Multiple Choice
! Status: Active i Always select on test? No Authorized for practice? No I Points: . 1.00
- Time to Complete: 2
- Difficulty: . 2.00 Fsystem ID: 23112
~Defined ID: 23112 Cross Reference Number: NLSRO-5004-2 I 234000-19 Topic ComQonents that limit the stJeed of a dropped Control Rod 2.9 -
- RO value:
Reference:
201003 K4.01 Comments: General Data Technical Reference with PBAPS Revisio Revision Number: UFSAR n #:
Chapter 3
. section i 3.4.5.1.2 i
Cognitive Level L .__ ..
, PRA: 0.e. Yes or No or #J N
, 10CFR55.43 (n/a for RO) 10CFR55.41 (b) 7 I Question History: (i.e. LGS LGS LOT Bank
Question Source: (i.e. New, Modified Bank, Modifie~
Revision History: Revision Modified from the i History: (I.e. Modified Limerick LOT exam bank
, distractor "b" to make question ID # 17049 I plausible based on OTPS (User-Defined ID:
review) LIMERICK LOT 1957)
- Supplied Ref (If None I appropriate): (Le. ABN-##)
- Excluded
Reference:
(i.e. UFSAR !
I Ensure ON-## not provided)
, Low KA Justification (if . . N/A I required) I Safety Function 1
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 20 10: 23063 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5 "1A" RHR is in Shutdown Cooling A reactor coolant leak develops causing RPV Water level to drops to +20" before it is stabilized using the "1 A" loop of Core Spray. Subsequently the following occurs:
"1A" and "1C" Core Spray pumps trip and cannot be restarted All other Core Spray pumps fail to start and inject "1 B", "1 C", and "10" RHR pumps fail to start and inject Reactor level drops -135" WHICH ONE of the following identifies the response of the "1 A" RHR subsystem, and impact on RPV Level?
"1 A" RHR Response Impact on RPV Level A. Shutdown Cooling will Isolate Level will go up LPCI will Inject B. Shutdown Cooling will Isolate Level will continue to lower LPCI will NOT inject C. Shutdown Cooling Remains lined-up Level will go up LPCI will inject O. Shutdown Cooling Remains lined-up Level will continue to lower LPCI will NOT inject Answer: B Answer Explanation:
ANSWER: Shutdown Cooling will Isolate, LPCI will NOT inject I Level will continue to lower:
Correct: "A" Loop of Core Spray is maintaining Level, above the SOC isolation setpoint. A subsequent LOOP, and trip of "A" core Spray results in loss of all ECCS pumps except "A" RHR. RPV water level lowers below the SOC isolation and LPCI injection RPV levels.
LPCI will not inject and consequently level will continue to lower.
In OPCON 3 the Group IIA Shutdown Cooling Isolation will never be bypassed per procedure so that when RPV level goes below 12.5 inches the Suction and Return valves will close. When the 1F008 and 1F009 valves are not full open, the 1A RHR pump will trip on loss of suction flow path and the 1F015A valve will close. In the lineup for SOC, the 1A RHR pump suction from the SP (1 F004A) is close so that there will be no flow path for the RHR pump to start and inject into the RPV for LPCI mode.
OISTRACTORS:
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Shutdown Cooling will Isolate, LPCI will inject I Level will go up: See Above Shutdown Cooling Remains lined-up, LPCI will inject I Level will go up: See Above Shutdown Cooling Remains lined-up,LPCI will NOT inject I Level will continue to lower: See Above
~~-
L9.\Jestion 20 Info ----~~--~
i Question Type: Multiple Choice I Status: Active I Always select on test? No
- Authorized for ~actlce? No Points: 1.00 Time to Com~ete: 4 I Difficulty: . 4.00
- System ID: 23063 User-Defined 10: 23063
- Cross Reference Number: NSLR00370.10 OPCON 3 - "1A" RHR is in SOC level drops, LPCI I Topic: response, level trend
- RO value: 4.3 SRO Value: 4.4 ..- -..
Reference:
203000 K3.01 Comments: ~ General Data
- Technical Reference with S51.8.B I Revisio
! Revision Number: n #:
- Cognitive Level H --.-
IpRA: (I.e. Yes or No or #) Y .. _ - -
II 10CFR55.43 (n/a for RO) RO 41.7
- Bank, Modified)
Revision History: Revision New History: (i.e. Modified i distractor "b" to make II plausible based on OTPS review)
. Supplied Ref (If None I appropriate): (I.e. ABN-##)
- Excluded
Reference:
(i.e. None I Ensure ON-## not ~rovided)
II Low KA Justification (if N/A i
required):
I I i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 21 ID: 23066 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5 "18" RHR is in ADHR, with Reactor coolant temperature at 98°F, and steady "1 An RWCU pump is in service The "18" RECW pump trips, and the "1 A" RECW fails to start automatically or manually.
Given the following:
HV-44-1 F001 (RWCU Cleanup Inboard PCIV)
HV-44-1 F004 (RWCU Cleanup Outboard PCIV)
WHICH ONE of the following describes the expected condition of above components, 5 minutes later?
A. "1 A" RWCU Pump is in service HV-44-1F001 is OPEN HV-44-1 F004 is OPEN
- 8. "1A" RWCU Pump is Tripped HV-44-1 F001 is OPEN HV-44-1 F004 is OPEN C. "1A" RWCU Pump is Tripped HV-44-1 F001 is OPEN HV-44-1 F004 is CLOSED D. "1A" RWCU Pump is Tripped HV-44-'1 F001 is CLOSED HV-44-1 F004 is CLOSED Answer: B Answer Explanation:
ANSWER: "1 An RWCU Pump is Tripped I BOTH HV-44-1 F001 AND HV-44-1 F004 are OPEN: Correct, A loss of RECW for 10 seconds will result in a trip of the !A RWCU pump, but will not result in an isolation of RWCU (both PCIVs remain open)
DISTRACTORS:
"1 An RWCU Pump is in service I BOTH HV-44-1 F001 AND HV-44-1 F004 are OPEN:
See Above "1A" RWCU Pump is Tripped I HV-44-1F001 is OPEN, HV-44-1F004 is CLOSED:
Partially correct as RWCU pump will trip. Incorrect as HV-44-1 F004 will not close. unless NRHX outlet temperature> 140°F. (reactor coolant temperature in noted in the stem as 98°F)
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination "1A" RWCU Pump is Tripped! Both HV-44-1F001 AND HV-44-1F004 are CLOSED:
See above Question 21 Info I Question Type: Multiple Choice
- Status: Active Always select on test? No lAuthorized for practice? No Points: 11.00 ..--.
. Time to Complete: 4 I Difficulty: . 4.00 SY:::iltHII ID: 23066 User-Defined I~ L?306j)
Cross Reference Number: NLSR00110L l.()~ic: O~con 5 RWCU ~um~ resl20nse to lossof RECW RO value: 3.1 SRO Value: 3.0 KA
Reference:
204000 A4.01 Comments: General Data Technical Reference with UFSAR pg 3.1.6, I Rev Revision Number: SGTS #:
i S76.9.A I ARC-MCR-112,
. H-1 i Cognitive Level L --
i PRA: (i.e. Yes or No or #) N I 10CFR55.43 {n/a for RO) N/A I Question History: (i.e. LGS New I NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New History: (Le. Modified distractor "b" to make I plausible based on OTPS review} ..
1 Supplied Ref (If None i appropriate): (i.e. ABN-##)
Excluded
Reference:
(Le. None Ensure ON-## not provided)
Low KA Justification (if N/A
- required): i l I II
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 22 10: 23095 Points: 1.00 PBAPS Unit 2 plant conditions are as follows:
MODE 5 Core Shuffle Part II is complete Fuel Pool To Reactor Cavity Gates are removed Fuel Pool Cooling (FPC) is in service Reactor Water Cleanup (RWCU) is in service The "2A" and "2B" Loops of RHR are blocked for maintenance Reactor Cavity water temperature is 120°F and steady An equipment failure results in an inadvertent Standby Liquid Control (SLC) initiation.
WHICH ONE of the following describes the impact of the SLC initiation? (Assume no Operator actions)
A. Reactor Cavity water pH will rise.
B. Fuel Pool Cooling system will isolate.
C. Reactor Cavity water temperature will rise.
D. Refueling Bridge Main Hoist will be inoperative.
Answer: C Answer Explanation:
C (Reactor Cavity water temperature will rise.) is correct since the SLC initiation will cause a RWCU isolation. Since RWCU was removing decay heat before the SLC initiation, the lack of decay heat removal will cause Reactor Cavity water temperature to go up (rise)
A (Reactor Cavity water pH will rise.) is wrong because the SLC will mix with the Reactor water and form an acidic solution (pH -J,)
B (Fuel Pool Cooling system will isolate) is wrong because the SBLC injection system initiation will ONLY cause an isolation of the RWCU system (NOT an isolation of the FPC system).
D [Refueling Bridge Main Hoist will be inoperative.] is wrong because the SLC initiation will not impact the Refueling Platform operation or interlocks.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination I Question 22 Info
-C::--'"
Question Type: Multiple Choice Status: Active .
Always select on test? No Authorized for practice? No
. Points: 1.00 I Time to Complete: 2 i Difficult:~{ 3.00 I System 10: 23095 User-Defined 10: 23095
. Cross Reference Number: NLSRO-5011-4 1 295023-3 i PBAPS initiation of SBL results in a RWCU isolation and Topic:
resultant temp rise RO value: 3.7 SRO Value: ..
[-;-;-;
3.B !
Reference:
211000 A1.0B Comments: General Data Technical Reference with PBAPS GP-BB I Revisio
. Revision Number: n #: 18 I Cognitive Level H I PRA: (i.e. Yes or No or #) N 10CFR55.4:3 (n/a for RO) 10CFR55.41l22.2 Question History: (i.e. LGS New NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New - 6/14/2010 NRC History: (i.e. Modified examiner stated that distractor "b" to make there are two non-plausible based on OTPS plausible distractors (A &
- review) D). That makes this question UNSAT.
l Distractors changed.
I Supplied Ref (If None i appropriate): (i.e. ABN-##)
i Excluded
Reference:
(i.e. PBAPS GP-8B
- Ensure ON-## not provided)
~ow KA Justification (if I N/A required):
i Safety Function 1 i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 23 10: 23067 Points: 1.00 LGS Unit 1 is in OPCON 2 with the following IRM indications:
IBM RANGE READING A 6 79 B 6 83 C 6 110 D 6 Bypassed E 6 97 F 6 122 G 6 81 H 6 103 WHICH ONE of the following describe the expected plant status?
Scram Signal Control Rod Withdraw Block A. NO Scram NOT Enforced B. NO Scram Enforced C. 1/2 Scram ONLY Enforced D. Full Scram Enforced Answer: C Answer Explanation:
ANSWER: ONLY 1/2 Scram Signal, AND Control Rod Withdraw Block Enforced:
Correct: IRM F (B RPS) is reading >120 which indicates there should be a B RPS actuation (1/2 Scram), Additionally IRMs C and H are above setpoint for a Rod Block >85 OISTRACTORS:
Full RPS Scram, AND Control Rod Withdraw Block Enforced: See above NO Scram Signal, NO Control Rod Withdraw Block Enforced: See Above NO Scram Signal,Control Rod Withdraw Block Enforced: See Above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination I Question 23 Info i Question Type: Multi!2le Choice Status: Active U}lways select on test? No ..----.
i Authorized for practice? No Points: 1.00 I Time to Complete: 3
.Difficult:z:: ~~-.
3.00 I
,S:z:stem ID: 23067 I User-Defined ID: 23067
. Cross Reference Number: NLSR00240L.04 r-Topic: IRM Reading, indentify expected RPS res~onse ROvalue: 3.7 SRO Value: 3.6 KA
Reference:
215003 A3.03 Comments: General Data I Technical Reference with ARC-MCR- Revisio ,
Revision Number: 107-F3 n #:
ARC-MCR II 107-H3 i-<:::ognitive Level L J:.I1A: (i.e. Yes or No or #) N
- 10CFR55.43 (n/a for RO) RO 41.7
, Question History: (i.e. LGS LGS Bank
Question Source: (Le. New, Modified Bank, Modified)
Revision History: Revision Changed from scram to i History: (Le. Modified rod block and 1/2 scram distractor "b" to make
- plausible based on OTPS I review)
- Supplied Ref (If ' None I appropriate): (Le. ABN-##)
[Excluded
Reference:
(Le. None i Ensure ON-## not provided)
Low KA Justification (if ! N/A required):
I I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 24 10:23069 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5 Unit 1 Refuel Floor HVAC in service Both SGTS Fans are in their normal alignment "AUTO" A Refuel Floor Isolation signal causes both "OA" & "OB" SGTS fans to AUTO start SGTS System flow stabilize at approximately 600 cfm The "OB" SGTS Fan control switch is taken to Standby (STBY)
WHICH ONE of the following describes the operation of the "OB" SGTS Fan, when its control switch is placed to STBY, and expected System Flow 2 minutes later?
A. "OB" SGTS Fan Trips immediately, System flow will be approximately 300 cfm:
B. "OB" SGTS Fan Trips immediately, System flow will be approximately 600 cfm C. "OB" SGTS Fan trips after 100 seconds, System flow Will be approximately 300 cfm D. "OB" SGTS Fan trips after 100 seconds.
System flow will be approximately 600 cfm Answer: B Answer Explanation:
ANSWER: OS" SGTS Fan Trips immediately, System flow will be approximately 600 cfm: Correct: Taking the "OB" fan to Standby, will immediately trip the fan, and the fan will remain in standby unless a low flow is detected for 5 seconds. Both SGTS fans start on RF isolation signal, the flowrate is controlled by the combined modulation of the fan inlet, outlet and bypass dampers, with each fan capable of 8,400 cfm. Consequently, 600 cfm is well within the capacity of one fan, and the flow will remain unchanged when the "OB" fan is removed form service.
OISTRACTORS:
"OS" SGTS Fan trips immediately, System flow will be approximately 300 cfm: This is partially correct in that the "OB" fan will immediately trip. It is incorrect as flow will be Approximately 600cfm.
"OS" SGTS Fan trips after 100 seconds, System flow will be approximately 300 cfm: This is incorrect as the fan will trip immediately (100 seconds is the time associated with a low dP Refuel Floor isolation signal), and system flow will remain 600 cfm.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination "08" SGTS Fan trips after 100 seconds, System flow will be approximately 600 cfm:
This is incorrect as the fan will trip immediately (100 seconds is the time associated with a low dP Refuel Floor isolation signal). This is partially correct as low will be Approximately 600cfm.
! Question 24 Info Question Type: Mul!i[2le Choice
- Status: Active Always select on test? No Authorized for practice? No Points: 1.00 The to Complete: 4 Difficulty: 4.00 System ID: 23069
- User-Defined ID: 23069
! Cross Reference Number: NLSR00200.06 IT . SGTS fan switch taken to SB after isolation, system
Reference:
261000 A 1.01 Comments: Ih=; General Data Technical Reference with UFSAR Pg Revisio Revision Number: 3.1-6 n #:
ARC-MCR 002-H-1 S76.9.A L9:>gnitive Level H
, PRA: (i.e. Yes or No or #) N
, 10CFR55.43 (n/a for RO) RO 41.5 i Question History: (I.e. LGS NEW
Question Source: (i.e. New, NEW Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make II plausible based on OTPS review)
- Supplied Ref (If None Lappropriate): (I.e. ABN-##)
I Excluded
Reference:
(i.e. None
, Ensure ON-## not provided) i i Low KA Justification (if N/A required): I 1
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 25 10: 23096 Points: 1.00 PBAPS Unit 2 plant condition are as follows:
MODE 2 Fuel Sipping is being performed in the Unit 2 Spent Fuel Pool with several confirmed leaking Fuel Bundles Refuel Floor ventilation is in a normal equipment lineup The Ventilation Duct Isolation Dampers for the Fuel Pool Scuppers fail closed.
WHICH ONE of the following describes the impact of the closed dampers on the concentration of fission product gases for the Refuel Platform crew?
The concentration of fission product gases will:
A. go up due to the change in the exhaust air flowpath.
B. go down due to the automatic start of the Standby Gas Treatment System (SBGT).
C. remain the same since the Fuel Pool Scupper ventilation is ONLY aligned when the Standby Gas Treatment System (SBGT) is in service.
D. remain the same because the lack of supply air from the scuppers will NOT change the concentration of fission product gases coming from the Spent Fuel Pool.
Answer: A Answer Explanation:
A (go up due to the change in the exhaust air flowpath.) is correct because the ventilation connections at the Fuel Pool Scuppers provide a suction path for the ventilation Exhaust fans which minimizes the amount of exposure to radioactive gases coming from the Fuel Pool/Reactor Cavity. Without this suction path, the radioactive gases will not be drawn away from the Refuel Platform crew and therefore, will contribute to the Refuel Platform airborne radioactive gas concentration.
B (go down due to the automatic start of the Standby Gas Treatment System (SBGT).) is wrong because SBGT treatment does NOT auto start on the closure of these dampers, and even if it did automatically start, without the suction path to the scuppers open there would still be a rise in the airborne radioactive gas concentration for the Refuel Platform crew.
C (remain the same since the Fuel Pool Scupper ventilation is ONLY active when the Standby Gas Treatment System (SBGT) is in service.) is wrong because the ventilation flowpath is active (when dampers are open) and the closing of the dampers will cause radioactive gas from the Fuel Pool/Reactor Cavity to have a higher concentration at the refuel platform is not removed directly from the surface of the water D (remain the same because the lack of supply air from the scuppers will NOT change the amount of fission product gases coming from the Spent Fuel Pool.) is wrong because the ventilation at the scuppers is NOT supply ventilation - but a path to the exhaust fans and will impact the exposure of the crew to fission product gases.
o
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 25 Info ...-- ...
Question Type: Mul~Choice Status:
'~~--.~--~
Active Always select on test? No
. Authorized for Dractice? No Points: 1.00 . __ .
. Time to Complete: 3 Difficulty: 3.00 I System ID 123096 User-Defined ID: !23096 i Cross 9~fere, II.,;~ Number: NLSRo->:;nLlnR-h I ?~Llnnn-Ll~
PBAPS Fuel Pool SCI ventilation ducts i~olRtArl ld
'Topic impact on rad gas concentrations ...
Reference:
288000 K5.01 Comments: General Data I' Technical Reference with I Revision Number:
M-391 sht 1 I Revisio n #: 34 I Cognitive Level H i PR;l.: {Le. Yes or No or #) N
- 10CFR55.43 (n/a for RO) 10CFR55.41 (b) 7
- Question History: (i.e. LGS New i NRC-05, OYS CERT-04) i Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS I review)
- Supplied Ref (If None I appropriate): (I.e. ABN-##)
i Excluded
Reference:
(I.e. None i Ensure ON-## not provided)
Low KA Justification (if N/A required):
Safety Function 9 I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 26 10:22407 Points: 1,00 LGS Plant conditions are as follows:
Unit 1 is in OPCON 5 Unit 2 is in OPCON 1 Zones 1 and 3 are cross-tied for cavity floodup Unit 2 Reactor Level drops to -50".
WHICH ONE of the following identifies the Zones aligned to SGTS?
A. Zone 1 only B. Zone 2 only C. Zones 2 and 3 only D. Zones 1, 2, and 3 Answer: B Answer Explanation:
Answer: Zone 2, only During normal operation, ventilation is provided to the three major zones of the secondary containment. The zones are:
- Zone I - Unit 1 Reactor Enclosure
- Zone II - Unit 2 Reactor Enclosure
- Zone III - Refuel Floor (Common)
Zone Intertie
- During Shutdown for refueling outage, Zone I (II) and Zone III may be interlocked to allow removal of the drywell shield blocks and floodup. While zones are interlocked, an isolation signal on one Zone will also isolate the interlocked zone. (e.g. Zone I isolation will give Zone III isolation and vice versa)
The low level signal on Unit 2 (Zone 2) will isolate Unit 2. It is independent of the other zones and will not effect the Zone 1 and 3 interties.
REACTOR ENCLOSlIRE ISOLATION SIGNALS SIGNAL DIV 1 DIV 2 SETPOINT HS76-*78A HS76-*78B Arm & Depress MANUAL
'EXH.HIRAD A and B Inst. C and D Inst. 1.35 mR/Hr
. Low A and B Inst. C and D Inst. -38", 1.68#
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
. SGTS Damper HV76-*96 HV76-*97 Not full closed Open
. Low A B -0.1" WG for 50 Zone DP min.s (still a vac, but not enough vac)
. RF Any Div.1 Any Div.2 Isol.
- Isolation Isol.
oistractors:
Zone 1, only - The low level signal on Unit 2 (Zone 2) will isolate Unit 2 and not effect the Zone 1 and 3 interties.
Zone 2 and 3, only - The low level signal on Unit 2 (Zone 2) will isolate Unit 2 and not effect the Zone 1 and 3 interties.
Zone 1, 2 and 3 - The low level signal on Unit 2 (Zone 2) will isolate Unit 2 and not effect the Zone 1 and 3 interties.
! Question 26 Info
, Question TYQe: Multiple Choice Status: Active
- Alwa~s select on test? No I Authorized for practice? No i Points: 1.00
,Time to Complete: 2
- Difficulty: 3.00 f---
- S~stem 10: 22407
! User-Defined 10: 22407 i Cross Reference Number: NLSR00190.03
!ToQic: Describe effect of low level with Zones 1 and 3 cross-tied i Num Field 1: 3.7 (3.9)
Num Field 2: 3.9 (4.0)
Text Field: 290001 K1.04 (A3.01 )
Comments: General Data Technical Reference with GP-8 I Revisio Revision Number: n #:
COQnitive Level L PRA: (i.e. Yes or No or #) Y 10CFR55.43 (n/a for RO) RO 41.7
'c5Uestion History: (I.e. LGS LGS Bank NRC-05, OYS CERT-04)
Question Source: (i.e. New, I Bank Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If I None
_ClPQroQriate): (i.e. ABN-##l Excluded
Reference:
(i.e. None Ensure ON-## not provided)
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 27 10: 23111 Points: 1.00 PBAPS Unit 2 conditions are as follows:
Surveillance test ST-0-018-125-2 "REFUELING INTERLOCKS FUNCTIONAL TEST WITH THE INABILITY TO MOVE CONTROL RODS" is being performed.
An LSRO is performing step 6.6.28 to remove of the 120 Volt Wire Jumper installed (via banana plugs) as part of simulating "All Rods In".
The LSRO is wearing Class "00" gloves.
WHICH ONE of the following identifies the MINIMUM Electrical Safety Personnel Protective Equipment required to remove this jumper?
A. Safety Glasses ONLY B. Class 1 (one) Clothing ONLY C. Safety Glasses, AND Class 1 (one) Clothing D. Safety Glasses, AND Insulating Sleeves Answer: C Answer Explanation:
ANSWER: Safety Glasses, AND Class 1 (one) clothing: is correct as prescribed in SA AA-129 (table 4 and table 1) removing a jumper, the required electrical safety PPE is Class 1 clothing and safety glasses. (Refer to SA-AA-129 Table 4 item 15 and Table 1')
OISTRACTORS:
Safety Glasses ONLY: Incorrect, while safety glasses are PART of the required PPE Class 1 clothing is also required Class 1 (one) Clothing ONLY: Incorrect, while class 1 clothing is PART of the required PPE safety glasses are also required Safety Glasses AND Insulating Sleeves: Incorrect, while safety glasses are PART of the required PPE Class 1 clothing Insulating Sleeves are not required.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination I Question 27 Info i QuestionT1'~e: Multiple Choice I Status: Active Always select on test? No
.I Authorized for practice? No """--"""--"
Points: 1.00 ""--""
Time to Complete: 2 Difficulty: 2.00 i System ID: 23111 I User-Defined ID: 23111
. Cross Reference Number: NLSR04010.01 I
Reference:
2.1.29
-:;;;C" Comments: General Data I Technical Reference with Revisio Revision Number: I SO iB.1.C-2 n #: 2 i SA-AA-129 6 I Cognitive Leve-I- - L i PRA: (I.e. Yes or No or #) N 10CFR55.43 (n/a for RO) 10CFR55.41(b) 10 Question History: (I.e. LGS New I NRC-05, OYS CERT-04)
Question Source: (I.e. New, New Bank, Modified)
Revision History: Revision New
! History: (I.e. Modified I distractor "b" to make i
plausible based on OTPS review)
I Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(I.e. None I Ensure ON-## not 2I"ovided)
Low KA Justification (if N/A required): i I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 28 10: 23105 Points: 1.00 PBAPS Unit 2 is in a refueling outage with the following conditions:
Core Shuffle Part II is in progress New fuel is being installed into the Reactor Core All Control Rods are fully inserted "2A" RHR Loop is lined up for Shutdown Cooling "2B" RHR Loop is Operable "2A" Core Spray Loop is Operable "2B" Core Spray Loop is Operable Fuel Pool to Reactor Cavity Gates are removed Reactor Cavity water level is + 474" While swapping Shutdown Cooling Pumps a valve failure results in Reactor Cavity water level dropping to + 454" (water level stabilizes at + 454").
WHICH ONE of the following actions MUST be performed within one hour of the drop in level (assume Reactor Cavity has NOT been refilled)?
A. Place Standby Gas Treatment System in operation B. Initiate action to restore secondary containment to Operable status C. Suspend movement of fuel assemblies within the RPV and Spent Fuel Storage Pool D. Initiate action to suspend Operations with the Potential to Drain the Reactor Vessel (OPDRVs)
Answer: C Answer Explanation:
C (Suspend movement of fuel assemblies within the RPV and Spent Fuel Storage Pool) is correct because Tech Spec 3.7.7 and 3.9.6 both specify that movement of fuel assemblies must stop immediately when level is less than +458 inches /232' 3" A (Place Standby Gas Treatment System in operation) is wrong because the tech spec for Standby Gas Treatment T.S. 3.6.5 states that a subsystem of SBGT should be placed in operation if moving RECENTLY irradiated fuel (which is NOT the case here) OR if performing OPDRVs (also NOT the case here) so there is no requirement to place SBGT in service during the above conditions.
B (Initiate action to restore secondary containment to Operable status) is wrong because the Tech Spec for Secondary Containment (T.S. 3.6.4) states that secondary containment is required for movement of RECENTLY irradiated fuel OR during OPDRVs (neither event is occurring). NOTE -- By procedure (FH-6C) Secondary Containment will already be operable. Even if Secondary Containment were NOT operable, Tech Specs does NOT require secondary containment unless moving Recently Irradiated Fuel (or OPDRVs)
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination D (Initiate action to suspend Operations with the Potential to Drain the Reactor Vessel (OPDRVs>> is wrong because Tech Specs does not require Reactor Cavity level of > than
+458 inches for OPDRVs (however, T.S. does require Secondary Containment and SBGT and two low pressure injection subsystems operable for OPDRVs).
~
Question 28 Info Question Type: Multiple Choice Status: Active
_ Always select on test? No
~uthorized for practice? No Points: 1.00 Time to Complete: 3
[Difficulty: 4.00
§§tem ID: 23105 User-Defined ID: 23105 Cross Reference Number: NLSRO-1841-9 I ?~4()()()-??
Knowledge of 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> tech specs - determine that Rx level is Topic:
too low for movement of fuel RO value: 3.9 SRO Value: 4.S KA
Reference:
Generic 2.2.39 Comments: General Data
! Technical Reference with PBAPS Tech Revisio Revision Number: Spec 3.7.7 and n #:
T.S.3.9.6
- Cognitive Level H
- PRA: (i.e. Yes or No or #) N 10CFRSS.43 (n/a for RO) 10CFRSS.41 (b) 10 10CFRS5.43(b) 2 Question History: (i.e. LGS New NRC-OS, OYS CERT-04)
- Question Source: (i.e. New, New Bank, Modified) i Revision History: Revision New
! History: (Le. Modified distractor "b" to make i plausible based on OTPS I review)
- Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(Le. Tech Spec 3.7.7 and T.S.
Ensure ON-## not provided) 3.9.6 (or the cognitive value of the Question is lowered)
!' Low KA Justification (if N/A
! required):
i Safety Function 9
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 29 10: 23107 Points: 1.00 ATTACHMENT 3 PBAPS Unit 3 is in a refueling outage with plant conditions as follows:
LSRO is leaving the fuel floor to report to the MCR, and must perform a whole body frisk using an RM-14 Radiation Monitor Considering the two (2) RM-14 Radiation Monitors shown on Attachment 3, WHICH ONE of the RM-14 Radiation Monitors is correctly setup to perform a whole body frisk AND WHICH ONE of the RM-14 Radiation Monitors is in a background radiation area that requires a re-frisk in a lower background radiation area?
RM-14 correctly set up Background radiation area for whole body frisk requires re-frisk A. RM-14 "#1" RM-14 "#2" B. RM-14"#1" RM-14 "#1" C. RM-14 "#2" RM-14 "#1" D. RM-14 "#2" RM-14 "#2" Answer: A Answer Explanation:
B is correct because the RM-14 #1 scale multiplier is selected to the X1 range and the instrument Response is set for 'SLOW' (RM-14 is set up for a whole body frisk); AND because the RM-14 #2 has a background reading of 1100 counts per minute (110 times 10 = 1100 cpm [multiplyer is selected to X1 0 for RM-14 #2)
A is wrong because the RM-14 #1 background radiation reading is 220 counts per minute.
RP-AA-350 states that a whole body frisk (without re-frisking in a lower background area) may be done in a background radiation area of <300 cpm.
C is wrong because the RM-14 #2 scale multiplier is selected to the X1 0 range (RM-14 #2 is NOT set up for a whole body frisk); AN D because the RM-14 #1 has a background reading of 220 counts per minute (220 cpm is < 300 cpm) and therefore no re-frisk is required.
D is wrong because the RM-14 #2 scale multiplier is selected to the X1 0 range (RM-14 #2 is NOT set up for a whole body frisk).
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination IQI
.,. II 29 Info I Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No
- Points: 1.00 I Time to Complete: 2 Difficulty: 2.00 System ID: 23107
,User-Defined ID: 23107 Cross Reference Number: N LSRO-1760-8 1 295023-7 Identify which RM-14 is correctly setup to perform a whole Topic:
body frisk RO value: 2.9 SRO Value: 3.1 KA
Reference:
Generic 2.3.15 Comments: General Data Technical Reference with RP-AA-350 I Revisio i Revision Number: n #:
i Cognitive Level H I PRA: {I.e. Yes orNo or #) N nDCFR55.43 (n/a for RO) 10CFR55.41(b) 12 I
10CFR55.43(b) 4 II Question History: (i.e. LGS New I
CERT-04)
I Question Source: (Le. New, New I Bank, Modified)
Revision History: Revision New 6/14/2010 NRC History: (Le. Modified examiner determined distractor "b" to make question to be unsat I plausible based on OTPS LD1. Recommend to I review) either add another part to the question OR get new K&A and write a new question GWZ - question modified.
Supplied Ref (If Attachment 3 appropri?!e): (I.e. ABN-##)
Excluded
Reference:
(i.e. RP-AA-350 Ensure ON-## not provided)
Low KA Justification (if N/A required):
Safety Function 9 I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 30 ID: 23079 Points: 1.00 An General Area Emergency is declared before TSC staffing is adequate.
WHICH OI\JE of the following positions performs the function of Emergency Director?
A. Site Vice President B. Plant Manager C. Shift Manager D. Station Duty Manager Answer: C Answer Explanation:
ANSWER: Shift Manager: Correct, Per EP-AA-112-1 00, the Shift Manager assumes the responsibilities of the ED until relieved by the Station Emergency Director at the TSC.
Transfer of command and control occurs only after adequate staffing is present (EP-AA 112).
DlSTRACTORS:
Site Vice President: See Above Plant Manager: See Above Station Duty Manager: See Above
- Question 30 Info i Question Type: Multiple Choice I Status: Active
- Always select on test? No Authorized for practice? No Points: 1.00 i Time to Complete: 2 Difficulty: 2.00 System ID: 23079 User-Defined ID: 23079 Cross Reference Number: NLSR01520.03 Topic: GE declared before TSC activation, who is ED RO value: 2.7 SRO Value: 4.5 KA
Reference:
2.4.40 Comments: General Data Technical Reference with I EP-AA-112 I Revisio Revision Number: n #:
COQnitive Level L f
PRA: (i.e. Yes or No or #) Y 10CFR55.43 (n/a for RO) 43.5
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question History: (i.e. LGS New NRC-05, OYS CERT-04)
Question Source: (Le. New, New Bank, Modified)
Revision History: Revision New
- History: (i.e. Modified i distractor "b" to make I plausible based on OTPS review)
I Supplied Ref (If None
. appropriate): (Le. ABN-##)
i Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A required): I I i
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 31 10: 23083 Points: 1.00 LGS Unit 2 plant conditions are as follows:
OPCON 5 Shuffle part 1 is in progress The station has been made aware of a potential land-based hostile actions involving a bomb on the Refuel Floor.
WHICH ONE of the following procedures require entry?
A. SE-8, Fire B. SE-3, Sabotage C. SE-23, Security Threat D. SE-1, Remote Shutdown Answer: C Answer Explanation:
ANSWER: SE-23, Security Threat: Correct, SE-23 Entry is required when the station has been made aware of a potential/actualland-based or air-based threat or hostile actions involving explosives, incendiary devices or bombs.
OISTRACTORS:
SE-3, Sabotage: Incorrect, SE-3 entry is required to verify plant safety systems operable AFTER a possible sabotage event.
SE-S, Fire: Incorrect: SE-8 entry is required for: Fire reported by phone, radio OR PA, or activation of a Fire alarm. While SE-8 entry may be required as a result of a bomb detonation, and subsequent fire, there is no direction to preemptively enter SE-8 SE-1, Remote Shutdown: Incorrect, SE -1 entry is required in event Main Control Room is uninhabitable OR fire occurs in: Main Control Room I Cable Spreading Room
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
- Question 31 Info
. Question Type: Multiple Choice I Status: Active Always select on test? No Authorized for practice? No Points: 1.00 Time to Complete: 2 Difficulty: 2.00 System ID: 23083 User-Defined ID: 23083 Cross Reference Number: NSLRO*SE'S.01 Core Alterations are being performed from the Unit 2 Refuel Topic:
Platform. A bundle has just been grapp RO value: 3.2 SRO Value: 4.1 lIE" D. ference: 2.4.28 Comments: General Data Technical Reference with SE-23 I Revisio I Revision Number: n #:
Cognitive Level L PRA: (Le. Yes or No or #) N 10CFR55.4~(n/a for RO) 43.5 Question History: (i.e. LGS New NRC-05, OYS 9ERT-04)
Question Source: (Le. New, New Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(Le. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 32 10: 23071 Points: 1.00 LGS Unit 1 plant conditions are as follows:
OPCON 5 Fuel Pool Cooling is in service with "1A" and "1 B" FPCC Pumps The "1 A" and "1 B" FPCC Heat Exchangers are in service Two (2) Fuel Pool Service Water Booster Pumps are in service A tube leak develops in the "1A" FPCC Heat Exchanger WHICH ONE of the following describes the plant response?
A. Skimmer Surge Tank Level will go UP B. Plant Service Water Radiation Level will go UP C. Fuel Pool Cooling Pumps will trip on Low Skimmer Surge Tank Level D. Fuel Pool Service Water Booster Pumps will Trip on Low Suction Pressure Answer: A Answer Explanation:
ANSWER: Skimmer surge tank level will go up: Correct as Service Water pressure is higher than Fuel Pool Cooling water pressure, leakage in the "1A" FPCC HXCHR will be from SW to FPCC resulting in Skimmer surge tank level going up OISTRACTORS:
Fuel Pool Cooling Pumps will trip on Low Skimmer Surge Tank Level: Incorrect, While FPCC pumps do trip on low Skimmer Surge Tank Level, this condition will not occure wit the noted leak Fuel Pool Service Water Booster Pumps will Trip on Low Suction Pressure:
Incorrect, Fuel Pool Service Water Booster Pumps take a suction on the Service Water Header, Upstream of the supply to the FPCC HXCHR.
Plant Service Water Radiation Level will go UP: Incorrect, as Service Water pressure is higher than Fuel Pool Cooling water pressure, leakage in the "1A" FPCC HXCHR will be from SW to FPCC
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
- Question 32 Info
~ction Type: Multiple Choice Status: Active
! Always select on test? No Authorized for practice? No
! Points: 1.00
! Time to Complete: 2
- Difficulty: 3.00 System ID: 23071 User-Defined ID: 23071 Cross Reference Number: NLSR007S0L.09 I--'----'-'
~el Pool Cooling is in service with,i2A" and "2B" FPCC Topic:
mps - The "2A" and "2B" FPCC Heat Exchan RO value: 2.9 SRO Value: 2.9 KA
Reference:
400000 K6.06 Comments: General Data Technical Reference with UFSAR 9.2 I Revisio
. Revision Number: P&ID M-S3 n #:
- Cognitive Level L PRA:{i.e. Yes or No or #) N
Question Source: (I.e. New, LGS Bank
. Bank, Modified)
- Revision History: Revision Bank History: (I.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None
'ate): (i.e. ABN-##)
- Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 33 10:23074 Points: 1.00 LGS Unit 2 conditions are as follows OPCON 5 Fuel Shuffle Part 2 (two) is in progress A Double Blade Guide has just been grappled for removal from the core The oncoming LSRO arrives on the Refuel Platform.
WHICH ONE of the following is the EARLIEST point where he/she can assume the duties of the LSRO?
A. After the Double Blade guide has been raised to NORMAL UP B. When the Double Blade Guide is properly positioned over the its intended target location C. When the Double Blade Guide is properly seated in its target location ONLY D. When the Double Blade Guide is properly seated in its target location and the grapple is released Answer: D Answer Explanation:
ANSWERS: When the Double Blade Guide is properly seated in its target location and the grapple is released: Per FH-105: Turnover shall not take place in the middle of a move involving transfer of a fuel bundle or blade guide, unless warranted by extraordinary circumstances DISTRACTORS:
After the Double Blade guide has been raised to NORMAL UP: See Above When the Double Blade Guide is properly positioned over the its intended target location: See Above When the Double Blade Guide is properly seated in its target location: See Above LGS NRC LORT 2009 Page: 69 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 33 Info Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No Points: 1.00 Time to Complete: 2 Difficulty: 2.00 System ID: 23074 User-Defined ID: 23074 Cross Reference Number: I'JLSR01571.04 Core Alterations are being performed from the Unit 2 Refuel Topic:
Platform. A bundle has just been grapp RO value: 3.7 SRO Value: 3.9 KA
Reference:
2.1.3 Comments
General Data Technical Reference with FH-105 I Revisio rlelevel Revision Number:
. e. Yes or No or #)
55.43 (n/a for RO)
L N
RO 41.10 n #:
-05, OYS CERT-04)
Question Source: (i.e. New, Modified Bank, Modified)
Revision History: Revision Modifed to add action as History: (i.e. Modified opposed to CCT AS step distractor "b" to make complete for answer plausible based on OTPS review)
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e. None r::nsure ON-## not provided)
Low KA Justification (if N/A required):
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 34 10:23068 Points: 1.00 LGS Unit 2 plant conditions are as follows:
OPCON 5 "2A" RHR is in Shutdown Cooling (SDC) in service Pressure Transmitter failures result in High Reactor Pressure Signals on all 4 SDC Group 2 RPV pressure indicators 5 minutes have elapsed.
WHICH ONE of the following describes the expected status of the Shutdown Cooling Suction INBOARD and OUTBOARD valves?
HV-51-2F009 INBOARD HV-5J -2F008 OUTBOARD A. Closed Closed B. Closed Open C. Open Closed D. Open Open Answer: A Answer Explanation:
ANSWER: Closed I Closed, Correct, The four noted pressure transmiters would result on closure of BOTH the Inboard and Outboard SDC isolation valves OISTRACTORS:
Closed I Open: Incorrect, this would be correct if only the A or B transmitters failed Open I Closed: Incorrect, this would be correct if only the C or D transmitters failed Open I Open: Incorrect, see above 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 34 Info Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No Points: 1.00 Time to Complete: 2 Difficulty: 3.00 System 10: 23068 User-Defined 10: 23068 Cross Reference Number: NLSR00370L.08 OPCON 5 - Shutdown Cooling (SOC) in service - RPV Topic:
pressure 50p§\ig during normal plant shutdown an RO value: 2.8 SRO Value: 2,9 KA
Reference:
223002 K6.06 I~
Comments: I General Data
- Technical Reference with ON-121 Revision Number:
Cognitive Level L PRA: (i.e. Yes or No or #) N 10CFR55.43 (n/a for RO) RO 41.7 Question History: (i.e. LGS LGS Bank NRC-05, OYS CERT-04J Question Source: (i.e. New, Bank Bank, Modified)
Revision History: Revision Modified for LSRO, still History: (i.e. Modified considered Bank Q distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(I.e. None Ensure 0 rovided)
Low KA Justification (if N/A required):
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 35 ID: 23070 Points: 1.00 LGS Unit 2 plant conditions are as follows:
OPCON 5 Core Shuffle Part 2 is in progress "2A" ADHR is in service at 6000 gpm Skimmer Surge Tank level drops to 6' resulting in the following conditions:
Bubbles are visible in the reactor cavity.
ARMs on the refuel floor platform are alarming RP determine dose rate at the water service is 300 mR/hr Refuel HVAC does not isolate WHICH ONE of the following correctly describes the procedures required to be entered for the above conditions?
A. ON-120, Fuel Handling Problems B. ON-121, Loss of Shutdown Cooling C. ON-111, Loss of Secondary Containment D. ON-125, Loss of Fuel Pool Cooling Answer: A Answer Explanation:
ANSWER: Enter ON-120, AND Evacuate the Refuel Floor: Correct Per ON-120, ARM on the refuel floor platform in alarm requries ON-120 entry DISTRACTORS ON-121, Loss of Shutdown Cooling: Incorrect, While ADHR is in a degraded condition, no pump trip will occur due to SST low level, consequently no ON-121 entry is requried ON-111, Loss of Secondary Containment: Incorrect, There is no condition that would resuilt in a RF isolation, andconsequently lead to a potential ON-111 Entry.
ON-125, Loss of Fuel Pool Cooling: Incorrect While ADHR is in a degraded condition, there is not a loss of fuel pool cooling, and consequently no ON-125 Entry
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
[Question 35 Info Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No
- Points: 1.00 Time to Complete: 2 Difficulty: 3.00 System 10: 23070
- User-Defined 10: 23070 Cross Reference Number: NLSR001550.01 SOC entrained air system response and required procedure Topic:
entr ROvalue: 4.0 SRO Value:
Reference:
272000 2.4.11 Comments: General Data
- Technical Reference with ON-120 I Revisio Revision Number: FH-105 n #:
Cognitive Level L
- PRA: (i.e. Yes or No or #) N
- 10CFR55.43 (n/a for RO) 43.5
- Question History: (Le. LGS New
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If I None appropriate): (i.e. ABN-##)
Excluded
Reference:
(Le.
Ensure ON-## not provided)
Low KA Justification (if N/A required):
lGS NRC lORT 2009 Page 7401107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 36 ID: 23090 Points: 1.00 PBAPS Plant conditions are a follows:
The E-3 Emergency Diesel Generator (EDG) is blocked for maintenance A fire results in the following:
The #1 Station Auxiliary Bus is De-energized The #2 Station Auxiliary Bus is De-energized WHICH ONE of the following describes the electrical power supplies to the PBAPS Unit 2 AND Unit 3 Refuel Platforms?
Unit 2 Refuel Platform Unit 3 Refuel Platform A. Power Available Power Available B. Power Available NO Power Available C. NO Power Available Power Available D. NO Power Available NO Power Available Answer: A Answer Explanation:
A (Power Available / Power Available) is correct since both the Unit 2 and Unit 3 Refuel Platforms are fed from Emergency Buses. Under a normal electrical lineup, Both Unit 2 and Unit 3 are fed from the E42/E43 Electrical Bus. Both the E42 and the E43 Bus are fed from the E-4 Emergency Diesel Generator and therefore would have power available during this transient. NOTE This would NOT be the correct answer at Limerick Generating Station (The Limerick Refuel Platforms are powered from Station Auxiliary power.
B (Power Available / NO Power Available) is wrong because the Unit 3 Refuel Platform would have electrical power available C (NO Power Available / Power Available) is wrong because the Unit 2 Refuel Platform would have electrical power available D (NO Power Available / NO Power Available) is wrong because both Refuel Platforms will have electrical power available - NOTE this is the correct answer for Limerick.
LGS NRC LORT 2009 Page: 75 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination ll. ., ,.36Info Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No i Points: 1.00 Time to Complete: 3 Difficulty: 3.00 System ID: 23090 User-Defined ID: 23090 er: NLSRO-5054*2 I 234000-47 Power supply to the PBAPS Unit 2 & Unit 3 Refuel Topic:
Platforms on loss of Aux power RO value: 3.1 SRO Value: 3.2 KA
Reference:
295003 AK1.04 Comments: General Data Technical Reference with E-1, Revisio Revision Number: E-1617 n #: 45 64 Cognitive Level L PRA: (i.e. Yes or No or #) Y 10CFR55.43 (n/a for RO) 10CFR55.41 (b)8 Question History: (i.e. LGS New NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (Le. ABN-##)
Excluded Referel None Ensure ON-## not provided)
Low KA Justification (if N/A required):
Safety FUnction 6 LGS NRC LORT 2009 Page: 76 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 37 10:23092 Points: 1.00 PBAPS Unit 2 Plant Conditions are as follows:
Mode 5 Reactor Cavity water level is +474 inches All Core Spray Pumps have been removed from service for maintenance The 2A RHR Pump is lined up for Shutdown Cooling The 2C RHR Pump is available (in standby)
The 2B and 20 RHR Pumps have been removed from service The 2A RHR Heat Exchanger develops excessive leakage and MUST be mechanically isolated.
Which ONE of the following describes the status of the PBAPS Unit 2 Tech Spec LCO 3.9.7 RHR
- High Water Level (One RHR Shutdown Cooling Subsystem operable and in Operation) AND the reason for the LCO status when the 2A Heat Exchanger is isolated?
Status of Tech Spec 3.9.7 LCO Reason For Status A. MET Shutdown Cooling CAN be provided by the 2C RHR Pump B. MET Shutdown Cooling may be out of service for up to 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> C. NOT MET The 2A RHR Heat Exchanger is II\lOPE RABLE D. NOT MET The 2B RHR Loop Heat Exchangers can NOT be used with the 2A RHR Loop Pumps Answer: A Answer Explanation:
Answer: MET I Shutdown Cooling CAN be provided by the 2C RHR Pump: is correct because the 2C RHR Pump and the 2C RHR Heat Exchanger makeup an Operable Shutdown Cooling Subsystem.
OISTRACTORS:
MET' Shutdown Cooling may be out of service for up to 12 hour1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />s: wrong because the Shutdown Cooling Subsystem may be out of service for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> in any 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> period.
NOT MET' The 2A RHR Heat Exchanger is INOPERABLE: wrong because there is an Operable Shutdown Cooling Subsystem and the LCO is met NOT MET' The 2B RHR Loop Heat Exchangers can NOT be used with the 2A RHR Loop Pumps: wrong because there is an Operable Shutdown Cooling Subsystem and the LCO is met
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
~rion 37 Info Question Type: Multiple Choice
- Status: Active
- Always select on test? No I Authorized for practice? No Points: 1.00
- Time to Complete: 3
- Difficulty: 4.00 System 10: 23092 User-Defined 10: 23092
~s Reference Number: NLSRO-1841-7 1 234000-6 Recognize entry level conditions for PBAPS Tech Specs Topic:
ECCS & SOC RO value: 3.9 SRO Value: 4.6 KA
Reference:
295021 G2.2.42 Comments: General Data I Technical Reference with
- PBAPS U2 Rev#:
Revision Number: T.S.and Bases
- 3.5.2 and 3.9.7 Amend 2591 Amend 210 Cognitive Level H
- PRA: (i.e. Yes or No or #) N 10CFR§5.43 (n/a for RO) 10CFR55.43 (b) 2 Question History: (i.e. LGS New NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New - 6/14/2010 NRC History: (i.e. Modified examiner stated question distractor "b" to make is UNSAT due to the stem plausible based on OTPS of the question telling the review) candidates that the tech spec is met Before the HX is isolated AND because one of the distractors is NOT plausible. Question chang~d on 6/14/2010 Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(I.e. Do not provide T.S.
Ensure ON-## not provided) Bases
! I ;~~ KA Justification (if N/A required):
Safety Function 4
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 38 10:23115 Points: 1.00 PBAPS Unit 3 plant conditions are as follows:
Mode 5 with Core Shuffle Part II in progress The Unit 3 Reactor Building and Refuel Floor Ventilation systems are in a normal lineup A high rad transport on the Reactor Building 195' elevation raises the background radiation levels of the four Reactor Building Exhaust Ventilation Radiation Monitors (RIS-3-17-452A, B, C, D).
The Reactor Building Exhaust Ventilation Radiation Monitor indications (RIS-3-17-452A, B, C, D) spike from 2 mr/hr to 22 mr/hr.
The Refuel Floor Exhaust Ventilation Radiation Monitor indications (RIS-3-17 -458A, B, C, D) remain steady at 2 mr/hr.
WHICH ONE of the following describes the Reactor Building (Rx Bldg) AND Refuel Floor Exh.
Ventilation radiation indications five minutes after the change in background radiation levels (assume no operator actions)?
Rx Bldg Exhaust Ventilation Refuel Floor Exhaust Ventilation Rad Monitor Indications are: RadMonitor Indications are:
A. VALID Indications of exh. air VALID Indications of exh. air B. VALID Indications of exh. air I\JOT VALID Indications of exh. air C. NOT VALID Indications of exh. air VALID Indications of exh. air D. NOT VALID Indications of exh. air NOT VALID Indications of exh. air Answer: 0 Answer Explanation:
o (NOT VALID Indications of exhaust airl NOT VALID Indications of exhaust air) is correct because when the Reactor BUilding Vent Exhaust rad monitors picked up > than 1Omr/hr, the normal ventilation system isolated (Both Reactor Building AND Refuel Floor) and SBGT started and aligned to both the Reactor Building AND the Refuel Floor.
Therefore, these rad monitors (for both the Reactor Building AND the Refuel Floor) are located at ducts that are isolated (no exhaust air flow) and therefore these rad monitors are NOT accurate indicators of exhaust air (which is going through the SBGT system).
NOTE -- This is a different lineup than would occur at Limerick under similar circumstances. At Limerick, the Reactor Building would isolate however, the Refuel Enclosure would remain on a normal ventilation lineup.
A (VALID I VALID) is wrong because neither the Reactor Building or the Refuel Floor ventilation systems are in-service (normal ventilation is isolated and SBGT is being used to maintain a negative Building I Enclosure DIP).
B (VALID I NOT VALID) is wrong because the Reactor Building normal ventilation system is isolated and therefore these rad monitors are not giving an accurate indication of the Reactor Building Exhaust air radiation levels.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination C (NOT VALID / VALID) is wrong because the Refuel Floor Ventilation system will isolate on a Reactor Building high exhaust radiation condition and therefore the Refuel Floor Rad Monitors are NOT giving an accurate indication of the radiation content of the exhaust air.
NOTE - This would be the correct answer if this situation were to occur at Limerick.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination I Question 38 Info Question Type: Multiple Choice Status: Active I Always select on test? No Authorized for practice? No I Points: 1.00 Time to Complete: 3 Difficulty: 3.00 3?ystem ID: 23115 User-Defined ID: 23115 Cross Reference Number: NLSR05040B-2 1 234000-4 PBAPS Reactor Building and Refuel Floor Exhaust Rad Topic:
monitor indication and~ccuracy RO value: 3.8 SRO Value: 4.2 KA
Reference:
295034 EA2.01 Comments: General Data i Technical Reference with M-391 sht 2 Rev#:
Revision Number: ARC-318 D-4 GP-8D
- Cognitive Level L
- PRA: (i.e. Yes or No or #) N
- 10CFR55.43 (n/a for RO) 10CFR55.41 (b) 7 i Question History: (i.e. LGS New NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New 6/14/2010 NRC History: (i.e. Modified examiner determined that distractor "b" to make the question is NOT plausible based on OTPS operationally valid for the review) LSROs (i.e. question involves plant conditions in MODE 3 (800 # steam) which is NOT the conditions in which the LSROs are performing actions. Question stem changed to MODE 5 conditions.
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e. None Ensure ON-## not provided)
~ustification (if N/A Safety Function 9
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 39 10:23077 Points: 1.00 ATTACHMENT 4 LGS Unit 2 plant conditions are as follows:
OPCON 5 Rod Stroking is in progress The "2A" CRD pump is in service "2A" CRD minimum flow to the CST is 32 gpm FCV-46-2FOOA "CRD Flow Control Station" is in service Control Station is in MAN (Manual)
CRD System Flow is 63 gpm HV-46-2F003 "Drive Water Pressure Control Valve" is throttled to maintain Drive Water dP 260 psid above Reactor Pressure The "2A" CRD minimum flow to the CST becomes blocked resulting in CRD minimum flow dropping to 0 gpm WHICH ONE of the following describe the impact on CRD System Flow and Drive Water dP?
CRD System_flow Drive Water dP A. Remains Constant Remains Constant B. Remains Constant Goes Up C. Goes Up Remains Constant D. Goes Up Goes Up Answer: D Answer Explanation:
NOTE:
Answer:Goes Up I Goes Up: Correct: With CRD FCV in manual a increase in CRD pump flow as caused by the minimum flow failure will result in CRD system flow increasing. This will also result in Drive water dP going up as Drive water dP is miantain by a manual drive water pressure control valve.
IF FCV was in Automatic it would throttle ot maintain system flow constant, which in turn would maintain Drive water dP constant Oistractors:
Remains Constant I Remains Constant: See Above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Remains Constant I Goes Up: See Above Goes Up I Remains Constant: See Above I Question 39 Info i Question Type: Multiple Choice Status: Active Always select on test? No I Authorized for practice? No Points:
-=......... 1.00 Time to Complete: 3 Difficulty: 3.00 i System ID: 23077
. User-Defined ID: 23077
System Flow and Drive Water dP RO value: 3.5 SRO Value: 3.7 KA
Reference:
291003 K1.01 Comments: General Data Technical Reference with GFE BANK I Revisio Revision Number: n #:
- Cognitive Level H PRA: (i.e. Yes or No or #) N
~R55.43 (n/a for ROJ RO 41.7 tion History: (I.e. LGS New
-05, OYS CERT-04)
I Question Source: (i.e. New, New
- Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If Attachment 4, M-0046 sht appropriate): (i.e. ABN-##) 2 with FCV "FC" blacked out Excluded
Reference:
(i.e.
Ensure ON-## not provided) j; KA Justification (if uired):
N/A
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 40 10: 23091 Points: 1.00 PBAPS Unit 3 conditions are as follows:
MODE 5 During turnover the on-coming LSRO observes the following in the Main Control Room:
Full Core Display Indications for Control Rod 30-31:
Displays a '00'.
Numeric display is in 'red'
'blue' 'SCRAM' light is lit
'red' 'ACCUM' light is lit Both Control Rod Drive Pumps are off Reactor Pressure is '0' psig WHICH ONE of the following describes the position of the 30-31 Control Rod?
A. Fully inserted into the Core based on the 'blue SCRAM' light lit B. Fully withdrawn out of the Core based on the 'red ACCUM' light lit C. Fully inserted into the Core based on the RPIS red color "00" indication D. Control Rod position is unknown based on the conflicting RPIS 'red 00' indication Answer; D Answer Explanation:
D [unknown (there is a position indication problem for the Control Rod)] is correct because the magnetic pick up micro-switches that are part of the PIP should give a green
'00' for a full in control rod. NOTE that if one of the switches was not made up, there would be an AMBER '00' indication. Therefore, there is a PIP problem (RED indication corresponds to a rod that is full OUT --> therefore an RPIS problem). There is a SCRAM condition present for the 30-31 control rod (Scram Inlet and Outlet Valves are open),
however, there is NO driving flow for the control rod to insert into the core (CRD PPs are off, Reactor pressure is low, and an Accumulator Low pressure alarm is up for Control Rod 30-31). NOTE At Limerick, there is NO notch position indication on the Full Core Display.
A (fully inserted into the Core) is wrong because there is conflicting rod position indication from the Full Core Display - '00' indicates full in HOWEVER the 'red' indication is for a rod that is full OUT. The fact that the Scram Valve are open (Blue SCRAM light lit) has no meaning without hydraulic pressure (no CRD Pumps and NO Reactor pressure)
B (fully withdrawn out of the Core) is wrong because there is conflicting rod position indication from the Full Core display - '00' indicates full in HOWEVER the 'red' indication is for a rod that is full OUT.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination C (Fully inserted into the Core based on the RPIS "00" indication) is wrong because there is conflicting rod position indication from the Full Core display '00' does indicates full in HOWEVER the 'red' indication is for a rod that is full OUT.
~.tion 40 Info i Question Type: Multiple Choice
! Status: ... Active Always select on test? No Authorized for practice? No Points: 1.00 Time to Complete: 3
. Difficulty: 3.00 System ID: 23091 i User-Defined ID: 23091
-Cross ..
Reference Number: NLSRO-5003-4 I ?~£1()()()-£1 Control Rod Position indication and the PBAPS Full Core Topic:
display RO value: 4.3 SRO Value: 4.4 KA
Reference:
295006 AA2.02 Comments: i General Data Technical Reference with M-1-S-20 sht 8 Revisio Revision Number: GE 104B2506 n #: 50 sht 2 0 Cognitive Level L
~:(i.e. Yes or N() or #) N 10CFR55.43 (n/a for RO) 10CFR55.41 (b)1 0 10CFR55.43(b)5 Question History: (i.e. LGS New NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make i plausible based on OTPS i review)
Supplied Ref (If None
~ropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
i Safety Function 1
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 41 10: 23089 Points: 1.00 PBAPS Unit 2 plant conditions are as follows:
MODE5 Reactor Cavity water level is +474" Control Rod Drive Exchanges are in progress "2A" Loop of RHR is blocked for maintenance "2B" Loop of RHR is in Shutdown Cooling "2A" Loop of Core Spray is Operable "2B" Loop of Core Spray is blocked for maintenance A Control Rod Drive is removed from a Control Cell that already has the Control Rod Blade removed.
WHICH ONE of the following describes the impact of the Control Rod Drive removal on Reactor Cavity water level assuming NO Operator action?
Reactor Cavity water level will lower to:
A. The bottom of the Reactor Cavity to Fuel Pool Gates and then remain steady.
B. Approximately the + 1" point and then remain steady.
C. Approximately the ~ 160" point and then begin to rise.
D. The 2/3 Core Coverage point (Top of Jet Pump Mixer sections) and then begin to rise.
Answer: C Answer Explanation:
C (approximately the -160 inch point and then begin to rise.) is correct because the water leak will drain water from the Reactor Cavity into the drywell and then back into the Torus.
Water will drain and level will continue to go down until the ECCS initiation setpoint is reached (-160 inches) and then the 'A' Loop of Core Spray will inject 6000 gallons per minute into the Reactor Cavity which will raise level to +474 inches (in fact, level will raise above that and end up flowing out of the Fuel Pool/Reactor Cavity).
A (the bottom of the Reactor Cavity to Fuel Pool Gates and then remain steady) is wrong because the Reactor Cavity Water level will continue to go down past the bottom of the Fuel Pool Gates (Fuel Pool water level will stop lowering at this point).
B (approximately the + 1 inch point and then remain steady at approximately + 1 inch) is wrong because the Reactor Cavity water level will continue to go down past the + 1 inch point (Shutdown Cooling will isolate) but the Group 2 isolations will NOT stop the leak.
D (the 2/3 Core Coverage point (Top of Jet Pump Mixer sections) and then begin to rise) is wrong because the Core Spray system will NOT permit the Cavity Water level to get down to the -226 inch point.
LGS NRC LORT 2009 Page: 86 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 41 Info Question Type: Multiple Choice
! Status: ~ive Always select on test.
Authorized for practice Points: 1.00 i Time to Complete: 3 i Difficulty: 3.00 System 10: ~89 _
User-Defined ID: 89 cross Reference SRO-5014-5 / 295023-1 Removing CRD and CRB from same control cell will result Topic:
in water level goil"19 to RO value: 4.2 SRO Value: 4.3
~
Reference:
295031 EK2.03 Comments: General Data II Technical Reference with M-1-B-65 shts Revisio I Revision Number: 2&4 n #: 0/0 M-1-S-40 shts 51/49/5 2-->5 1/52 M-1-S-65 shts 99/95/9 2,3,4 5 M-361 sht 1 81 GP-8B 18 M-362 sht 1 62 i ~nitive Level H A: (Le. Yes or No or #) N 10CFR55.43 (n/a for RO) 10CFR55.41 (b)7 Question History: (Le. LGS New NRC-05, OYS CERT-04)
Question Source: (i.e. New, New
- Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None i appropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e. None Ensure ON-## not provided) I Low KA Justification (if N/A required):
Safety Function 2 I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 42 ID: 23102 Points: 1.00 PBAPS Unit 3 is in a refueling outage with plant conditions as follows:
The "3C" RHR Pump is in Shutdown Cooling The "3C" HPSW Pump lined up to the "3C" RHR Heat Exchanger Reactor water temperature is 110°F and steady The HPSW Outlet Valve on the out-of-service "3A" RHR Heat Exchanger fails open.
WHICH ONE of the following describes the impact of the valve failure on the Shutdown Cooling system? (Assume NO Operator action)
Total HPSW System Flow Reactor water temperature A. Down Down B. Down Up C. Up Down D. Up Up Answer: D Answer Explanation:
D (UP I Up) is correct because the failure of the 'A' HX outlet valve will allow system head (resistance) to go down and allow more SYSTEM flow (NOTE - There is LESS 'C' HX flow). With less cooling water going through the 'C' HX (due to being diverted through the
'A' HX), the heat removal function is reduced and the Reactor Cavity water temperature will go up. NOTE - Limerick does NOT have two RHR HXs in each RHR loop and therefore does NOT control Cavity temperature by splitting the HPSW flow between two HXs (one in service and one NOT in service).
A (Down I Down) is wrong because the total HPSW System flow will go up AND because the reduction in flow HPSW flow through the 'C' HX will result in Cavity water temperature going Up.
B (Down I Up) is wrong because the total HPSW System flow will go up with the additional flowpath.
C (Up / Down) is wrong because the reduction in HPSW through the 'C' HX will result in Cavity water temperature going up (NOT down).
LGS NRC LORT 2009 Page: 88 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
.Question 42 Info iQuestion Type: Multiple Choice Status: Active I ~Iways select on test? No rAuthorized for practice? No Points: 1.00
.Time!o Complete: 3 I Difficulty: 3.00 ISystemlD: 23102 User-Defined ID: 23102 Cross Reference Number: NLSRO-5010-2 I 295023-3 PBAPS HPSW valve failure and how it impacts SDC and Topic:
Rx water temperature RO value: 3.5 SRO Value: 3.6 KA
Reference:
205000 K1.15 Comments: General Data I I Technical Reference with M-361 sht 3/4 Revisio Revision Number: M-315 sht 3 n #:
68/68 53 i Cognitive Level H II PRA: (Le. Yes or No or #) N
! I 1OCF1:355.43 (n/a for RO) 10CFR55.41 (b) 4
! Question History: (i.e. LGS New i NRC-05, OYS CERT-04)
Question Source: (i.e. New, New Bank. Modified)
- Revision History: Revision New I! History: (Le. Modified distractor "b" to make plausible based on OTPS I review)
. Supplied Ref (If None appropriate): (Le. ABN-##)
Excluded
Reference:
(Le. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
i Safety Function 4 I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 43 10:23099 Points: 1.00 PBAPS Unit 3 is in a refueling outage with plant conditions as follows:
Activities are occurring in preparation for remove the Control Rod Blade (CRB) at location 18-37:
Refuel Platform is positioned over CRB 18-37 All Refuel Platform Hoists are unloaded The undervessel crew has reported difficulty in uncoupling the CRD 18-37 The CRB 18-37 Coupling Handle has just been actuated by the RPO per M-C-741-301 "Control Rod Blade, FSP and Control Rod Guide Tube Removal and Installation" The Refuel Platform 'STOP' pushbutton is depressed AFTER the Refuel Platform 'STOP' pushbutton is depressed, THEN the Reactor Operator applies a continuous withdraw signal to Control Rod 18-37 while the undervessel crew attempts uncoupling.
The following indications are observed:
The CRB raised slightly and has now settled to a lower position CRD 18-37 "Rod Overtravel" Annuciator is lit in the MCR "Rod Block Interlock #1" Annuciator is Lit WHICH ONE of the following actions should be directed by the Fuel Handling Director?
A. Re-attempt uncoupling of Control Rod 30-31 from under Vessel using M-C-741-301 "Control Rod Blade, FSP and Control Rod Guide Tube Removal and Installation" B. Re-attempt uncoupling of Control Rod 30-31 from above Vessel using I\J1-C-741-301 "Control Rod Blade, FSP and Control Rod Guide Tube Removal and Installation" C. Move Control Rod Blade 30-31 when the Refuel Platform is restarted in accordance with SO 18.1.C-3 "Electrical, Mechanical and Pneumatic Alignment I Checkout of Refueling Platform" D. Stop ALL Core Component moves until the Refuel Platform Interlocks are verified operable per ST-0-018-120-3 "Refueling Interlocks Functional Test with the Ability to Move Control Rods" Answer: D Answer Explanation:
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination o (Stop ALL Core Component moves until the Refuel Platform Interlocks are verified operable per ST-0-018-120-3 "Refueling Interlocks Functional Test with the Ability to Move Control Rods") is correct since depressing the "STOP" push button with the Refuel Platform over the core should bring in a 'Rod Interlock Block #1' (even though Hoists are unloaded). Since the Control Rod was able to be withdrawn with the 'STOP' push Button depressed, There is a failure of the 'Rod Interlock Block #1' circuitry. Therefore, Core Alterations should be suspended until the Refuel Interlocks are verified to be operating correctly. NOTE - At Limerick, depressing the "STOP" push button does NOT bring in the 'Rod Interlock Block #1 '.
A (Re-attempt uncoupling of Control Rod 30-31 from under Vessel using M-C-741-301 "Control Rod Blade, FSP and Control Rod Guide Tube Removal and Installation"") is wrong because the Control Rod Blade is uncoupled.
B ( Re-attempt uncoupling of Control Rod 30-31 from above Vessel using M-C-741-301 "Control Rod Blade, FSP and Control Rod Guide Tube Removal and Installation") is wrong because the Control Rod Blade is uncoupled.
C (Move Control Rod Blade 30-31 when the Refuel Platform is restarted in accordance with SO 18.1.C-3 "Electrical, Mechanical and Pneumatic Alignment I Checkout of Refueling Platform") is wrong because the Control Rod Blade should NOT be moved until the Refuel Interlocks are verified Operable.
IQuestion 4~ Info Question Type: Mul!iple Choice IStatus: Active
- Always select on test? No i Authorized for practice? No
- Points: 1.00 IiIme to Complete: 4 I Difficulty: 4.00
- System 10: 23099 I User-Defined 10: 23099 Cross Reference Number: N LSRO-0762-9 I 234000-19 PBAPS - Identify failure of the the Rod Block Interlock #1 Topic:
ancjprovide direction RO value: 3.3 SRO Value: 3.7 KA
Reference:
234000 A2.01 Comments: I General Data I
- Technical Reference with SO 18.1.A-3 Revisio
! Revision Number: attachment 1 n #:
M-1-S-20 326-P-VC-1 II Cognitive Level H
. PRA: (Le. Yes or No or #) N
.110CFR55.43 (n/a for RO) 10CFR55.41 (b) 5 II 10CFR55.43(b) 5 Question History: (Le. LGS New NRC-05, OYS CERT-04)
Question Source: (Le. New, New Bank, Modified)
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(Le. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
LGS NRC LORT 2009 Page: 92 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 44 10: 23076 Points: 1.00 WHICH ONE of the following describes the LGS Unit 1 and Unit 2 injection points for the alternate injection subsystems listed?
A. RHRSW via "A" Loop RHR RHRSW via "A" Loop RHR
- 8. RHRSW via "8" Loop RHR RHRSW via "8" Loop RHR C. Fire Water via "A" Loop RHR Fire Water via "8" Loop RHR D. Fire Water via "8" Loop RHR Fire Water via "An Loop RH R Answer: D Answer Explanation:
Answer: Unit 1 = Fire Water via liB" Loop RHR I Unit 2 = Fire Water via "A" Loop RHR Correct:
T-244 ALTERNATE INJECTION FROM THE FIRE SYSTEM utilizes the "8" RHR header for Unit 1 and the "A" RHR header for Unit 2 T-243 ALTERNATE INJECTION 8YWAY OF RHRSW TO RHR LOOP "8" for Unit 1 and LOOP "Au for Unit 2 Distracters:
RHRSW via "A" Loop RHR RHRSW via "A" Loop RHR - See Above RHRSW via "B" Loop RHR RHRSW via "B" Loop RHR - See Above Fire Water via" A" Loop RHR Fire Water via "B" Loop RHR - See Above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 44 Info Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No Points: 1.00
- Time to Complete: 2 I Difficulty: 3.00 System ID: 23076
- User-Defined ID: 23076 i Cross Reference Number: NSLR00685L.05, NSLR00400L.03 Identify the Unit 1 and Unit 2 injection points for the Topic:
alternate injection subsystems RO........
value: RO 3.1 SRO Value: SRO 3.3 KA
Reference:
KIA 2.2.3 Comments: General Data I Technical Reference with T-243; T-244 I Revisio Revision Number: n #:
! Cognitive Level L PRA: (i.e. Yes or No or #) Y 10CFR55.43 (n/a for RO) RO 41.7 Question History: (i.e. LGS 02NRC NRC-05, OYS CERT-04)
Question Source: (i.e. New, Bank Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 45 10:23098 Points: 1.00 PBAPS Unit 2 is in a refueling outage with plant conditions as follows:
Core Shuffle Part II is complete Vessel Re-assembly is in progress Reactor Building Ventilation is in a normal lineup Refuel Floor Ventilation is in a normal lineup Reactor Level Instrumentation failure results in low reactor water level -10" indication on all Wide Range Level instruments.
WHICH ONE of the following describes the Unit 2 ventilation lineup (assume NO Operator action)?
Unit 2 Reactor Building Ventilation from: Unit 2 Refuel Floor Ventilation from:
A. Normal HVAC Normal HVAC B. Normal HVAC Standby Gas Treatment (SBGT)
C. Standby Gas Treatment (SBGT) Normal HVAC D. Standby Gas Treatment (SBGT) Standby Gas Treatment (SBGT)
Answer: D Answer Explanation:
D (Standby Gas Treatment (SBGT) / Standby Gas Treatment (SBGT) is correct because an indication of less than or equal to + 1 inch will result in a Group 2 isolation which includes putting both the Unit 2 Reactor Building AND the Unit 2 Refuel Floor on the Standby Gas Treatment system. NOTE - This would NOT be the case at Limerick.
The low Reactor water level signal at Limerick will result in the Reactor Building ventilation going to SBGT, However, the Refuel Containment would NOT be affected (would remain on Normal HVAC).
A (Normal HVAC / Normal HVAC) is wrong because the setpoint for the Group 2 isolation is +1 inch, and since that is met the normal ventilation (for Reactor Building & Refuel Floor) will isolate and the SBGT will start and draw on both areas.
B (Normal HVAC / Standby Gas Treatment (SBGT>> is wrong because the SBGT system will start and draw on the Unit 2 Reactor Building C (Standby Gas Treatment (SBGT) / Normal HVAC) is wrong because the SBGT system will start and draw on the Unit 2 Refuel Floor NOTE This would be the correct answer if this were to occur at Limerick.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination I Question 45 info i Question Type: Multiple Choice Status: I Active Always select on test? No
. Authorized for practice? No Points: 1.00 Time to Complete: 3 Difficulty: 3.00 iSystem ID: 23098 I User-Defined ID: 23098
- Cross Reference Number: NLSRO-5040B-5 PBAPS Refuel Floor and Rx Building Ventilation lineup from iTopic:
an INVALID low level indication RO value: 2.8 SRO Value: 2.9 KA
Reference:
223002 K6.06 Comments: General Data i Technical Reference with GP-8B I Revisio Revision Number: n #: 18 I Cognitive Level L PRA: (Le. Yes or No or #) N I 10CFR55.43 (n/a for RO) 10CFR55.41 (b) 7
! Question History: (Le. LGS New NRC-05, OYS CERT-04)
Question Source: (Le. New, New Bank, Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None
?flpropriate): (i.e. ABN-##)
Excluded
Reference:
(Le. None i Ensure ON-## not provided)
Low KA Justification (if I\I/A required):
Safety Function 5 I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 46 ID: 23100 Points: 1.00 PBAPS plant conditions are as follows:
Unit 2 is in a refueling outage Unit 3 is shutdown and depressurized for a forced maintenance outage ALL Low Pressure ECCS subsystems are in a normal lineup A Loss of offsite power has occurred The E-4 Emergency Diesel Generator (EDG) is the ONLY EDG that is running WHICH ONE of the following describes the ability of the Low Pressure ECCS systems to automatically inject water into the Reactor Vessel on a low water level condition (assume NO Operator actions)?
PBAPS Unit 2 Automatic ECCS Injection PBAPS Unit 3 Automatic ECCS In jection A. Available Available B. Available NOT Available C. NOT Available Available D. NOT Available NOT Available Answer: A Answer Explanation:
A (Available I Available) is correct because the E-4 EDG powers both Unit 2 AND Unit 3 ECCS -- The Unit 2 B Loop CIS valves (and one pump) and the Unit 3 BLoop RHR valves (and one pump). Logic circuits are powered off of batteries. NOTE This would NOT be the case at Limerick. A single Limerick EDG does NOT power Unit 1 & Unit 2 ECCS equipment.
B (Available I NOT Available) is wrong because Unit 3 BLoop RHR is available for automatic injection C (NOT Available I Available) is wrong because Unit 2 BLoop RHR AND B Loop Core Spray are available for auto inject.
D (NOT Available I NOT Available) is wrong because Both Unit 2 AND Unit 3 ECCS is available for automatic injection
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Question 46 Info Question Type: Multiple Choice Status: Active Always select on test? No Authorized for practice? No Points: 1.00 I Time to Complete: 2 Difficulty: 3.00 System ID: 23100
- User-Defined ID: 23100 Cross Reference Number: NLSRO-5054-2 /234000-47 PBAPS Unit 2 & Unit 3 Given ONE EDG operating Topic:
(LOOP). determine ECCS capability RO value: 4.2 SRO Value: 4.4 KA
Reference:
264000 K3.01 Comments: General Data II Technical Reference with E-1 sht 1 Revisio I Revision Number: E-1617 sht 1 E-1717sht1 I ~:45 60 Cognitive Leyel L PRA: (i.e. Yes or No or #) N I 10CFR??.43 (n/a for RO) 10CFR55.41 (b) 7 Question History: (I.e. LGS New
I Question Source: (i.e. New. New Bank. Modified)
Revision History: Revision History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (I.e. ABN-##)
Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A required):
Safety Function 6 LGS NRC LORT 2009 Page: 98 of 107 12 July 2010
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 47 10: 23078 Points: 1.00 LGS Unit I plant conditions are as follows:
Reactor Power was approximately 100% for the last 3 weeks Reactor was Scrammed 10 hours1.157407e-4 days <br />0.00278 hours <br />1.653439e-5 weeks <br />3.805e-6 months <br /> ago Shutdown Cooling is in service Reactor Coolant Temperature is going down WHICH ONE of the following describes how Reactor Coolant Temperature going down will will impact Shutdown Margin?
A. Adds Negative Reactivity which Decreases Shutdown Margin B. Adds Negative Reactivity which Increase Shutdown Margin C. Adds Positive Reactivity which Decreases Shutdown Margin D. Adds Positive Reactivity which Increases Shutdown Margin Answer: C Answer Explanation:
ANSWER: Adds Positive Reactivity which Decreases Shutdown Margin: Correct. As Reactor coolant (moderator) temperature decrases negative reactivity is added which devcrease shutdown margin.
DISTRACTORS Adds Negative Reactivity which Decreases Shutdown Margin: See Above Adds Negative Reactivity which Increase Shutdown Margin: See Above Adds Positive Reactivity which Increases Shutdown Margin: See Above
[Que~tion~7 Info Question Type: Multiple Choice Status: Active Always select on test? No
! Authorized for practice? No
- Points: 1.00
- Time to Complete: 2 Difficulty: 3.00 System ID: 23078 User-Defined ID: 23078
- Cross Reference Number: BR02.09, BR08.03 Topic: Evaluate Change in SDM due to change in plant parameter RO value: 2.6 SRO Value: 2.9 KA
Reference:
292002 K1.14 Comments: II General Data I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
! Technical Reference with GFE BANK I Revisio
- Revision Number: n #:
I Cognitive Level H
~RA: (i.e. Yes or No or #) N 10CFR55.43 (n/a for RO) RO 41.4 Question History: (i.e. LGS New
Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS
- review)
I Supplied Ref (If None appropriate): (i.e. ABN-##)
I Excluded
Reference:
(i.e. None
- Ensure 01\1-## not provided)
Low KA Justification (if N/A required):
I
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 48 10: 23117 Points: 1.00 PBAPS Unit 2 is in a refueling outage with plant conditions are as follows:
Core Shuffle Part I is in progress An irradiated Fuel Assembly is being moved to a Spent Fuel Rack near the Cask Pit Concurrent with the Fuel Assembly being lowered into the specified rack location, the 20C075 C-1
'Fuel Storage Pool Hi Radiation' alarm comes in.
WHICH ONE of the following describes the location of the Spent Fuel Pool Radiation Monitor AND the required procedure entry?
Location of SFP Radiation Monitor Required Procedure Entry A. North Wall SFP 01\1-124 'Fuel Floor and Fuel Handling Problems' B. South Wall SFP ON-124 'Fuel Floor and Fuel Handling Problems' C. North Wall SFP G P-15 'Local Evacuation' D. South Wall SFP GP-15 'Local Evacuation' Answer: A Answer Explanation:
A is correct (North Wall SFP I ON-124 'Fuel Floor and Fuel Handling Problems') because the SFP Rad Monitor is located on the North Wall of the Spent Fuel Pool (by CRB Racks)
AND since the CASK PIT is NOT close to the Rad Monitor, the correct procedure to cover the unexpected Rad Monitor Alarm is ON-124 (per ARC-20C075 C-1)
B is wrong (South Wall SFP I ON-124 'Fuel Floor and Fuel Handling Problems') because the Unit 2 SFP Rad Monitor is on the North Wall. NOTE - This would be the correct answer if this event were to occur on PBAPS Unit 3.
C is wrong (North Wall SFP I GP-15 'Local Evacuation') because this procedure would be entered on an unexpected ARM alarm (The SFP Rad Monitor is NOT an ARM (Area Radiation Monitor).
D is wrong (South Wall SFP / GP-15 'local Evacuation') because the SFP Rad Monitor is located on the North Wall of the Unit 2 SFP AND because the GP-15 procedure would NOT be entered in this situation unless an ARM were to alarm as well.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination IQuestion 48 Info Question Type: Multiple Choice Status: Active Alwavs select on test? No i Authorized for practice? No Points: 1.00
- Time to Complete: 3
! Difficulty: 3.00 System 10: 23117 I User-Defined TO: 23117 Cross Reference Number: NLSR5~
PBAPS Hi Spent Fuel Pool Rad Monitor alarm during Topic:
Shuffle Part I RO value: 4.0 SRO Value: 4.2 KA
Reference:
272000 G2.4.11 Comments: General Data Technical Reference with ARC 20C075 Revisio I Revision Number: C-1 & n #: 4 i ARC 218 C-1 *1 ON-124
- 14 AG-CG-132 1 I
Exhibit 3 Cognitive Level L
- PRA: (I.e. Yes or No or #) N 10CFR55.43 (n/a for RO) 10CFR55.41 (b) 10 10CFR55~43(b) 5 i Question History: (Le. LGS NEW
Question Source: (i.e. New, NEW Bank, M()dified)
Revision History: Revision History: (I.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (Le. ABN-##)
Excluded
Reference:
(i.e. ARC 20C075 C-1 Ensure ON-## not provided) ON-124 Low KA Justification (if N/A required):
Safety Function 7 I
I .
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 49 10: 4503 Points: 3.00 LGS Unit 1 plant conditions are as follows:
- OPCON 5
- An LPRM is being transported to the fuel pool per M-C-774-010 "LPRM / SRM, IRM WRNM Dry Tube Replacement" when ARM RIS-31-M1-1 K600, on the Refuel Floor wall north of the Spent Fuel pool Alarms.
- The LPRM is immediately lowered
- The ARM Alarm clears WHICH ONE of the following describes the purpose of the ARM and required action?
ARM Purpose Required Action A. Isolate Refuel Floor Ventilation Health Physics monitors dose rates Per M-C-774-01 0 B. Isolate Refuel Floor Ventilation Evacuate the Fuel Floor Per ON-120 C. Detect Potential Criticality Health Physics monitors dose rates in The Fuel Pool Per M-C-774-010 D. Detect Potential Criticality Evacuate the Fuel Floor in The Fuel Pool Per ON-120 Answer: C Answer Explanation:
ANSWER: Detect Potential Criticality in The fuel pool/Health Physics monitors dose rates: The ARM on the Wall North of the Spent Fuel Pool is one of three "CRITICALITY MONITORS", During Transport of an LPRM, the instrument is close to the surface of the water and may result in an ARM alarming. M-C-774-010 directs HP monitoring of dose rate during LPRM replacements and movements.
DISTRACTORS:
Isolate Refuel Floor Ventilation/Health Physics monitors dose rates: This is incorrect as a Refuel Floor Isolation is generated by Radiation detectors located in the Refual exhaust ducts, not the noted ARM. This is partially correct as during Transport of an LPRM, the instrument is close to the surface of the water and may result in an ARM alarming. M-C-774-010 directs HP monitoring of dose rate during LPRM replacements and movements.
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination Isolate Refuel Floor Ventilation/Evacuate the Fuel Floor: This is incorrect as a Refuel Floor Isolation is generated by Radiation detectors located in the Refual exhaust ducts, not the noted ARM. Additionally, an evacuation is NOT correct as ON-120 only requires a evauation if a Fuel Floor Area Radiation Monitor alarms unplanned AND is not due to object handled near water surface which is immediately re submerged.
Detect Potential Criticality in The fuel pool/Evacuate the Fuel Floor: This is incorrect as evacuation is NOT correct as ON-120 only requires a evauation if a Fuel Floor Area Radiation Monitor alarms unplanneg AND is not due to object handled near water surface which is immediately resubmerged. It is partially correct as the ARM on the Wall North of the Spent Fuel Pool is one of three "CRITICALITY MONITORS".
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
! Question 49 Info Question Type: Multi p 113C:::Ogige Status: Active Always select on test? No Authorized for practice? No Points: 3.00 Time to Complete: 3 Difficulty: 3.00 System 10: 4503 User-Defined 10: !4503 Cross Reference Number: NLSR0071 0.04 location of the indicator and trip units for the refuel floor Topic:
area radiation monitor RO value: 3.9 SRO Value: 4.2 KA
Reference:
295033 EK1.02 Comments: General Data Technical Reference with M-C-774-010 Rev #:
Revision Number: ON-120 RP-LG-462 1000
! Cognitive Level L i PRA: (i.e. Yes or No or #) N 10CFR5S.43 (n/a for RO) 43.4 Question History: (I.e. LGS New
. NRC-OS, OYS CERT-04)
, Question Source: (i.e. New, New Bank, Modified)
Revision History: Revision New History: (i.e. Modified distractor "b" to make plausible based on OTPS review)
Supplied Ref (If None appropriate): (i.e. ABN-##)
Excluded
Reference:
(i.e. None Ensure ON-## not provided)
Low KA Justification (if N/A
. d).
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination 50 10: 5537 Points: 1.00 LGS Plant conditions are as follows:
Loss of offsite power has occured for BOTH Unit 1 and Unit 2 Only D14 and D21 DGs are running and powering their respective buses.
WHICH ONE of the following describes the availability of a LPCI subsystem to provide injection with flow through a heat exchanger cooled by RHRSW?
UNIT 1 UNIT 2 A. Available Available B. Available Not Available C. Not Available Available D. Not Available Not Available Answer: C Answer Explanation:
ANSWER: Not Available I Available: Correct, Only available power sources are D14 and D21. This results in power to the following available components:
UNIT 1: D14, 1D RHR pump only UNIT 2: D21, 2A RHR pump, OC RHRSW pump 1D RHR cannot be aligned to a RHRSW heat exchanger 2A RHR can be aligned through the 2A RHRSW heat exchanger, which can be cooled by the OC RHRSW pump.
OISTRACTORS:
Available I Available: See Above Available I Not Available: See Above NOT Available I NOT Available: See Above
EXAMINATION ANSWER KEY LSRO 10-1 NRC Initial Licensing Examination
[Question 50 Info
~estion Type: . Multiole Choice
- Status: Active I Always select on test? No
- Authorized for practice?
r-=--.
No
- Points: 1.00 Time to Complete: 4
- Difficulty: 4.00 iSystem ID: 5537 i User-Defined ID: 5537
@oss Reference Number: NLSR00655L.04 Offsite power has been lost to both Unit 1 and Unit 2 at
- Topic:
--=-:._ _ .._ _... LGS. Only D14 and D21 Emergency Diesel Ge RO value: 4.2 SRO Value: 4.4 KA
Reference:
264000 K3.01 Comments: I General Data I Technical Reference with E-1 I Revisio
- Revision Number: n #:
[Cognitive Level H I PRA:(i.e. Yes or No #) or Y 10CFR55.43 ~n/a for RO) RO 41.7
. Question History: (i.e. LGS LGS Bank NRC-OS, OYS CERT-04)
Question Source: (i.e. New, Bank Bank, Modified)
Revision History: Revision Bank History: (i.e. Modified !
distractor "b" to make i plausible based on OTPS
- review)
I Supplied Ref (If None appropriat~L(i.e. ABN-##)
I Excluded
Reference:
(i.e. None Ensure ON-## not provided)
IWW KA Justification (if required): _
I N/A
...