ML22131A097
| ML22131A097 | |
| Person / Time | |
|---|---|
| Site: | Seabrook  |
| Issue date: | 05/05/2022 |
| From: | NextEra Energy Seabrook |
| To: | Office of Nuclear Reactor Regulation |
| Shared Package | |
| ML22131A110 | List:
|
| References | |
| SBK-L-22042 | |
| Download: ML22131A097 (54) | |
Text
SEABROOK STATION UPDATED FINAL SAFETY ANALYSIS REPORT CHAPTER 3 DESIGN OF STRUCTURES, COMPONENTS, EQUIPMENT AND SYSTEMS FIGURES 3.3-1 Pressure Coefficients Distribution for Cylinders and Spheres 3.3-2 Tornado Size Factor Cs Versus Building Length (L) 3.4-1 Waterproofing Concrete Typical Details 3.5-1 Possible Turbine Missile Trajectory 3.5-2 Coordinate Systems 3.5-3 Plot Plan and Elevation View Showing Effective Target Area 3.5-4 Relationship of Penetration to Scabbing Limit Thickness (Reference 12) 3.5-5 Xm/Xe Curves for Elasto-Plastic System Rectangular Impulse Load (Reference 15) 3.6(B)-1 Main Steam Piping Outside Containment 3.6(B)-2 Feedwater Piping Outside Containment 3.6(B)-3 Containment Penetration (Hot High Energy Lines) 3.6(B)-4 Containment Penetration (Cold High Energy Lines) 3.6(B)-5 RC Line 13 Pipe Whip Restraint Protecting CS, RC and RH Lines and Valves - Containment Zone 438 3.6(B)-6 Pressurizer Surge Line Pipe Whip Restraint Protecting Steam Generator Slowdown and Safety Injection Lines - Containment Zone 458 3.6(B)-7 Pressurizer Surge Line Pipe Whip Restraint Protecting Steam Generator Support, Reactor Coolant and Safety Injection Lines -Containment Zone 448 and 458 3.6(B)-8 RC-58 Pipe Whip Restraint Protecting RC. RH, and SI Lines and Valves Containment Zone 468 3.6(B)-9 Safety Injection Accumulator Line Pipe Whip Restraint Protecting CS, RH and RC Lines and Valves - Containment Zone 4
3.6(B)-10 SI Line Pipe Whip Restraints Protecting RC, RH, and SI Lines and Valves - Containment Zone 448 3.6(B)-11 SI Pipe Whip Restraint Protecting RC and SI Lines and Valves -
Containment Zone 458 3.6(B)-12 SI Pipe Whip Restraint Protecting CS, RC RH and SI Lines and Valves -
Containment Zone 468 3.6(B)-13 MS & FW Pipe Whip Restraints Protecting MS and RC Lines, Upper Level Taps and CRDM Assembly - Containment Zone 57E 3.6(B)-14 Main Steam Pipe Whip Restraints Protecting SB, CBS Lines, Valves and Containment Liner/Penetrations - Containment Zone 53C 3.6(B)-15 Main Steam Line Axial Pipe Whip Restraints Protecting Containment Penetrations - MS and FW Pipe Chase Zone 13B 3.6(B)-16 Main Steam Pipe Whip Restraints Protecting the Main Steam Isolation Valves and the Containment Penetrations - MS and FW Pipe Chase Zone 148 3.6(B)-17 Break and Thrust Locations Isometric for MS Pipes in West Pipe Chase 3.6(B)-18 Main Steam Pipe Whip Restraints Protecting West Pipe Chase North Wall - MS and FW Pipe Chase Zone 14C 3.6(B)-19 Main Steam Pipe Whip Restraint Protecting Containment Liner and Penetrations - Containment Zone SSD 3.6(B)-20 Main Steam Line Axial Pipe Whip Restraints Protecting Containment Penetrations - MS and FW Pipe Chase Zone 16B 3.6(B)-21 Main Steam Pipe Whip Restraints Protecting the Main Steam Isolation Valves and Containment Penetrations - MS and FW Pipe Chase Zone 17B 3.6(B)-22 Break and Thrust Locations Isometric forMS Pipes in East Pipe Chase 3.6(B)-23 Main Steam Pipe Whip Restraints Protecting West Pipe Chase North Wall- MS and FW. Pipe Chase Zone 17C 3.6(B)-24 Main Steam and Feedwater Pipe Whip Restraints Protecting East Wall of Control Building and Electrical Chase - MS and FW Pipe Chase Zone 15B 3.6(B)-25 Feedwater Pipe Whip Restraint Protecting the Containment Liner and Penetrations and CC & SB Lines and Valves - Containment Zone 53C 3.6(B)-26 Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - MS and FW Pipe Chase Zone 13A 3.6(B)-27 Break and Thrust Locations Isometric for FW Pipes in West Pipe Chase
3.6(B)-28 Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - MS and FW Pipe Chase Zone 14A 3.6(B)-29 Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - Containment Zone SSC 3.6(B)-30 Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - Containment Zone 16A 3.6(B)-31 Break and Thrust Locations Isometric for FW Pipes in East Chase 3.6(B)-32 Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations -Containment Zone 17A 3.6(B)-33 Pipe Bridge West Main Steam and Feedwater Pipe Whip Restraints Protecting Turbine and Control Buildings 3.6(B)-34 Pipe Bridge East Main Steam and Feedwater Pipe Whip Restraints Protecting Turbine Building and Condensate Storage Tank 3.6(N)-1 Loss of Reactor Coolant Accident Boundary Limits 3.6(N)-2 Reactor Coolant System, Pipe Break and Whip Restraint Locations 3.7(B)-1 Time History Accelogram (0.25g), Horizontal Component 1 - SSE 3.7(B)-2 Time History Accelogram (0.25g), Horizontal Component 2 - SSE 3.7(B)-3 Time History Accelogram (0.25g), Vertical Component - SSE 3.7(B)-4 0.50% Critical Damping Ground Response Spectrum, Horizontal Component 1.,. SSE 3.7(B)-5 1% Critical Damping Ground Response Spectrum, Horizontal Component 1- SSE 3.7(B)-6 2% Critical Damping Ground Response Spectrum, Horizontal Component 1- SSE 3.7(B)-7 5% Critical Damping Ground Response Spectrum, Horizontal Component 1- SSE 3.7(B)-8 7% Critical Damping Ground Response Spectrum, Horizontal Component 1 - SSE 3.7(B)-9 10% Critical Damping Ground Response Spectrum, Horizontal Component 1 - SSE 3.7(B)-10 0.5% Critical Damping Ground Response Spectrum, Horizontal Component 2 - SSE 3.7(B)-11 1% Critical Damping Ground Response Spectrum, Horizontal Component 2 - SSE 3.7(B)-12 2% Critical Damping Ground Response Spectrum, Horizontal Component 2 - SSE
3.7(B)-13 5% Critical Damping Ground Response Spectrum, Horizontal Component 2 - SSE 3.7(B)-14 7% Critical Damping Ground Response Spectrum, Horizontal Component 2 - SSE 3.7(B)-15 10% Critical Damping Ground Response Spectrum, Horizontal Component 2 - SSE 3.7(B)-16 1% Critical Damping Ground Response Spectrum, Vertical Component -
SSE 3.7(B)-17 2% Critical Damping Ground Response Spectrum, Vertical Component -
SSE 3.7(B)-18 5% Critical Damping Ground Response Spectrum, Vertical Component -
SSE 3.7(B)-19 7% Critical Damping Ground Response Spectrum, Vertical Component -
SSE 3.7(B)-20 10% Critical Damping Ground Response Spectrum, Vertical Component
- SSE 3.7(B)-21 Containment Shell- Seismic Model 3.7(B)-22 Containment Internals- Mathematical Model 3.7(B)-23 Primary Auxiliary Building Seismic Analysis- Mathematical Model 3.7(B)-24 Control/Diesel Generator Building Seismic Analysis - Mathematical Model 3.7(B)-25 Fuel Storage Building Seismic Analysis - Mathematical Model 3.7(B)-26 Amplified Response Spectra- SSE- Containment Shell- 7% Structural Damping; 2% Equipment Damping 3.7(B)-27 Amplified Response Spectra- SSE- Primary Auxiliary Building -7%
Structural Damping; 2% Equipment Damping 3.7(B)-28 Amplified Response Spectra - SSE - Control/Diesel Generator Building -
7% Structural Damping; 2% Equipment Damping 3.7(B)-29 Amplified Response Spectra- SSE- Fuel Storage Building - 7%
Structural Damping; 2% Equipment Damping 3.7(B)-30 Typical Ceiling to Floor Supported Cable Tray System 3.7(B)-31 Mathematical Model of Typical Ceiling to Floor Supported Cable Tray System 3.7(B)-32 Mounting Detail of Triaxial Time History Accelerograph, XT 6700, in East Air Intake Structure 3.7(B)-33 Mounting Detail of Triaxial Peak Accelerograph, XR-6703, on Safety Injection Piping (Line 203)
3.7(B)-34 Mounting Detail of Triaxial Peak Accelerograph, XR-6704, on PCCW Piping 3.7(B)-35 Primary Auxiliary Building Amplified Response Spectra (Vertical) OBE, 4% Damping 3.7(B)-36 Primary Auxiliary Building Amplified Response Spectra (Vertical) OBE, 1% Damping 3.7(B)-37 Typical Pipe Support Systems 3.7(B)-38 Alternative to Regulatory Guide 1.61 Damping Values 3.7(N)-1 Multi-Degree of Freedom System 3.8-1 Containment Structure Mat Reinforcing 3.8-2 Containment Structure Typical Reinforcing 3.8-3 Containment Structure Equipment Hatch Typical Reinforcing 3.8-4 Containment Structure Personnel Air Lock Typical Reinforcing 3.8-5 Containment Structure Liner Details 3.8-6 Containment Structure Reinforcing at Penetrations 3.8-7 Containment Structure Dome Reinforcing 3.8-8 Design Temperature Gradient through Containment Wall 3.8-9 Containment Pressure Transients Following a LOCA 3.8-10 Containment Cylinder Liner Temperature Transients Curve 3.8-11 Containment Dome Liner Temperature Transients Curve 3.8-12 Axisymetric Modeling Elements 3.8-13 Reinforced Concrete Idealization 3.8-14 Boundary Conditions for Equipment Hatch Analysis - Model Sketch 3.8-15 Shell Section Illustrating Computed Force and Moment Resultants 3.8-16 Containment Axisymetric Model 3.8-17 Three-Dimensional Finite Element Model for Equipment Hatch Analysis 3.8-18 Layered Cross Section Model for MARC-CDC Element 22 3.8-19 Finite Element Model of Containment Mat 3.8-20 Containment Structure Personnel Airlock 3.8-21 Containment Structure Equipment Hatch with Personnel Airlock 3.8-22 Typical High Energy Piping Penetration 3.8-23 Typical Moderate Energy Piping Penetration
3.8-24 Typical Electrical Penetration 3.8-25 Fuel Transfer Tube Arrangement 3.8-26 Typical Ventilation Penetration 3.8-27 Electrical Penetration Seal Temperature Response Following 0.84 ft2 Split Rupture at 75% Power 3.8-28 Reactor Vessel Lateral Support 3.8-29 Primary Shield Wall Main Reinforcement and Anchorage System 3.8-30 Design of Kick-Back Plate, Clamp Plate, Base Plate and Anchor Bolts for Polar Crane 3.8-31 Control Room Makeup Air Intake Structure East and West 3.8-32 Enclosure for Condensate Storage Tank 3.8-33 Pipe Tunnels (Typical) 3.8-34 Safety-Related Electrical Duct Banks- Typical Cross Section 3.8-35 Typical Safety-Related Electrical Manholes 3.8-36 Typical Reinforcing Detail at Base Slab and Wall 3.8-37 Service Water Pipe Access Vault Concrete Plan & Sections Precast Roof Option 3.9(N)-1 Reactor Coolant Loop Support System, Dynamic Structural Model 3.9(N)-2 Through-Wall Thermal Gradients 3.9(N)-3 Control Rod Drive Mechanism 3.9(N)-4 Control Rod Drive Mechanism Schematic 3.9(N)-5 Nominal Latch Clearance at Minimum and Maximum Temperature 3.9(N)-6 Control Rod Drive Mechanism Latch Clearance Thermal Effect 3.9(N)-7 Lower Core Support Assembly (Core Barrel Assembly) 3.9(N)-8 Upper Core Support Structure 3.9(N)-9 Plan View of Upper Core Support Structure 3.11-1 Service Environment Chart 3A-1 Composite Piping Zones (Nuclear) Key Plan 3A-2 Turbine Building Zone Key Plan Piping 3A-3 Auxiliary Building Zone Key Plan Piping
SEABROOK STATION Pressure Coefficients Distribution for Cylinders and Spheres UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.3-1
Size Factor CS = Average Pressure/Max. Tornado Pressure 270 300 240 210 L (Feet) 180 120 150 90 60 30 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Size Factor CS = Average Pressure/Max. Tornado Pressure G:\Images_P\UFSAR\332.ds4 SEABROOK STATION Tornado Size Factor Cs Versus Building Length (L)
UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.3-2
See 805067 SEABROOK STATION Composite Piping Zones (Nuclear) Key Plan UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3A-1
See 202117 SEABROOK STATION Turbine Building Zone Key Plan Piping UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3A-2
See 202118 SEABROOK STATION Auxiliary Building Zone Key Plan Piping UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3A-3
See 101696 SEABROOK STATION Waterproofing Concrete Typical Details UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.4-1
SEABROOK STATION Possible Turbine Missile Trajectory UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.5-1
Y 8
Y L
X U
R G:\Word\Images_P\UFSAR\352.ds4 Z
SEABROOK STATION Coordinate Systems UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.5-2
SEABROOK STATION Elevation View From UPDATED FINAL SAFETY The NNW ANALYSIS REPORT M. N.
N Turbine Admin Turbine Heater Bay Heater Bay Plan View D. G. Control D. G. Control Containment Containment Plot Plan and Elevation View Showing Effective Target 0 100 200 Waste Pump Aux Fuel Proc Aux Fuel House Scale in Feet Dashed Envelope is Target Area For Large Aircraft. G;\Word\Images_P\UFSAR\353.ds4 Figure Crossed Section of Envelope is FB-111A Target Area.
3.5-3 Area
16 14 12 Lim it DS 10 Sp d all ing Limit Thickness 8
6 4
2 2 4 6 8 10 12 D1/d D1 = Penetration d = Diameter of Missle G:\Images_P\UFSAR\354.ds4 DS = Thickness required to Prevent Spalling SEABROOK STATION Relationship of Penetration to Scabbing Limit Thickness (Reference 12)
UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.5-4
SEABROOK STATION Xm/Xe Curves for Elasto-Plastic System Rectangular Impulse Load (Reference 15)
UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.5-5
SEABROOK STATION Main Steam Piping Outside Containment UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-1
SEABROOK STATION Feedwater Piping Outside Containment UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-2
SEABROOK STATION Containment Penetration (Hot High Energy Lines)
UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-3
SEABROOK STATION Containment Penetration (Cold High Energy Lines)
UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-4
SEABROOK STATION RC Line 13 Pipe Whip Restraint Protecting CS, RC and RH Lines and Valves - Containment Zone 43B UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-5
SEABROOK STATION Pressurizer Surge Line Pipe Whip Restraint Protecting Steam Generator Blowdown and Safety Injection Lines -
UPDATED FINAL SAFETY Containment Zone 45B ANALYSIS REPORT Figure 3.6(B)-6
SEABROOK STATION Pressurizer Surge Line Pipe Whip Restraint Protecting Steam Generator Support, Reactor Coolant and Safety Injection UPDATED FINAL SAFETY Lines -Containment Zone 44B and 45B ANALYSIS REPORT Figure 3.6(B)-7
SEABROOK STATION RC-58 Pipe Whip Restraint Protecting RC, RH, and SI Lines and Valves - Containment Zone 46B UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-8
SEABROOK STATION Safety Injection Accumulator Line Pipe Whip Restraint Protecting CS, RH and RC Lines and Valves - Containment UPDATED FINAL SAFETY Zone 43B ANALYSIS REPORT Figure 3.6(B)-9
SEABROOK STATION SI Line Pipe Whip Restraints Protecting RC, RH, and SI Lines and Valves - Containment Zone 44B UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-10
SEABROOK STATION SI Pipe Whip Restraint Protecting RC and SI Lines and Valves -Containment Zone 45B UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-11
SEABROOK STATION SI Pipe Whip Restraint Protecting CS, RC, RH and SI Lines and Valves - Containment Zone 46B UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-12
SEABROOK STATION MS & FW Pipe Whip Restraints Protecting MS and RC Lines, Upper Level Taps and CRDM Assembly -
UPDATED FINAL SAFETY Containment Zone 57E [2 Sheets]
ANALYSIS REPORT Figure 3.6(B)-13 Sh. 1 of 2
SEABROOK STATION MS & FW Pipe Whip Restraints Protecting MS and RC Lines, Upper Level Taps and CRDM Assembly -
UPDATED FINAL SAFETY Containment Zone 57E [2 Sheets]
ANALYSIS REPORT Figure 3.6(B)-13 Sh. 2 of 2
SEABROOK STATION Main Steam Pipe Whip Restraints Protecting SB, CBS Lines, Valves and Containment Liner/Penetrations - Containment UPDATED FINAL SAFETY Zone 53C ANALYSIS REPORT Figure 3.6(B)-14
SEABROOK STATION Main Steam Line Axial Pipe Whip Restraints Protecting Containment Penetrations - MS and FW Pipe Chase Zone UPDATED FINAL SAFETY 13B ANALYSIS REPORT Figure 3.6(B)-15
SEABROOK STATION Main Steam Pipe Whip Restraints Protecting the Main Steam Isolation Valves and the Containment Penetrations - MS and UPDATED FINAL SAFETY FW Pipe Chase Zone 14B ANALYSIS REPORT Figure 3.6(B)-16
SEABROOK STATION Break and Thrust Locations Isometric for MS Pipes in West Pipe Chase UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-17
SEABROOK STATION Main Steam Line Axial Pipe Whip Restraints Protecting Containment Penetrations-MS and FW Pipe Chase Zone 16B UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-18
SEABROOK STATION Main Steam Pipe Whip Restraint Protecting Containment Liner and Penetrations - Containment Zone 55D UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-19
SEABROOK STATION Main Steam Line Axial Pipe Whip Restraints Protecting Containment Penetrations - MS and FW Pipe Chase Zone UPDATED FINAL SAFETY 16B ANALYSIS REPORT Figure 3.6(B)-20
SEABROOK STATION Main Steam Pipe Whip Restraints Protecting the Main Steam Isolation Valves and Containment Penetrations - MS and FW UPDATED FINAL SAFETY Pipe Chase Zone 17B ANALYSIS REPORT Figure 3.6(B)-21
SEABROOK STATION Break and Thrust Locations Isometric for MS Pipes in East Pipe Chase UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-22
SEABROOK STATION Main Steam Pipe Whip Restraints Protecting West Pipe Chase North Wall - MS and FW Pipe Chase Zone 17C UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-23
SEABROOK STATION Main Steam and Feedwater Pipe Whip Restraints Protecting East Wall of Control Building and Electrical Chase - MS and UPDATED FINAL SAFETY FW Pipe Chase Zone 15B ANALYSIS REPORT Figure 3.6(B)-24
SEABROOK STATION Feedwater Pipe Whip Restraint Protecting the Containment Liner and Penetrations and CC & SB Lines and Valves -
UPDATED FINAL SAFETY Containment Zone 53C ANALYSIS REPORT Figure 3.6(B)-25
SEABROOK STATION Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - MS and FW Pipe Chase Zone 13A UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-26
SEABROOK STATION Break and Thrust Locations Isometric for FW Pipes in West Pipe Chase UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-27
SEABROOK STATION Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - MS and FW Pipe Chase Zone 14A UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-28
SEABROOK STATION Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - Containment Zone 55C UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-29
SEABROOK STATION Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - Containment Zone 16A UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-30
SEABROOK STATION Break and Thrust Locations Isometric for FW Pipes in East Chase UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-31
SEABROOK STATION Feedwater Pipe Whip Restraints Protecting Containment Liner and Penetrations - Containment Zone 17A UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-32
SEABROOK STATION Pipe Bridge West Main Steam and Feedwater Pipe Whip Restraints Protecting Turbine and Control Buildings UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(B)-33
SEABROOK STATION Pipe Bridge East Main Steam and Feedwater Pipe Whip Restraints Protecting Turbine Building and Condensate UPDATED FINAL SAFETY Storage Tank ANALYSIS REPORT Figure 3.6(B)-34
CASE I Outgoing Lines With Normally Closed Valve Reactor Coolant Piping Boundary Note: Pressurizer Safety Valves Are Included Under This Case.
CASE II Outgoing Lines With Normally Open Valve R
Note: The Reactor Coolant Pump R No. 1 Seal Is Assumed To Be Equivalent To First Valve Fail Closed or Fail-As-Is Valves Boundary Restraint CASE III Incoming Lines Normally With Flow No. 1 No. 2 Boundary Test Connection CASE IV Incoming Lines Normally Without Flow Boundary Test Connection (Means of Verifying That Check Valve Is Closed)
CASE V All Instrumentation Tubing and Instruments Connected Directly to the Reacotor Coolant System is Considered as a Boundary. However, a Break Within this Boundary Results in a Relatively Small Flow Which Can Normally be Made Up With the Charging System.
G:\Word\Images_P\UFSAR\36N1.ds4 SEABROOK STATION Loss of Reactor Coolant Accident Boundary Limits UPDATED FINAL SAFETY ANALYSIS REPORT Figure 3.6(N)-1
SEABROOK STATION Steam Generator 2
UPDATED FINAL SAFETY Reactor Pressure Vessel Steam Generator ANALYSIS REPORT Upper Support Reactor Coolant Pump 1
3 Reactor Coolant Pump Support Steam Generator Lower Support Reactor Coolant System, Pipe Break and Whip Restraint G:\Word\Images_P\UFSAR\36N2.ds4 Figure 3.6(N)-2 Locations