ML16363A452

From kanterella
Revision as of 06:20, 9 October 2018 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
Jump to navigation Jump to search
Columbia Generating Station - Cycle 23 Core Operating Limit Report (Colr), Revision 2
ML16363A452
Person / Time
Site: Columbia Energy Northwest icon.png
Issue date: 12/28/2016
From: Gregoire D W
Energy Northwest
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
G02-16-180
Download: ML16363A452 (21)
v • d • e


Text

ENERGY NORTHWEST G02-16-180 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Rockville, MD 20852 Donald W. Gregoire Columbia Generating Station P.O. Box 968, PE20 Richland, WA 99352-0968 Ph. 509.377.8616 IF. 509.377.4098 dwgregoire@energy-northwest.com

Subject:

COLUMBIA GENERATING STATION, DOCKET NO. 50-397 CYCLE 23 CORE OPERATING LIMITS REPORT {COLA}, REVISION 2

Dear Sir or Madam:

In accordance with the Columbia Generating Station Technical Specifications

{TS) 5.6.3.d, Energy Northwest herewith submits the Cycle 23 COLA, Revision 2. The operating limits in the COLA revision were developed in accordance with the requirements of TS 5.6.3.a, b, and c. The changes to the COLA have been reviewed by the Columbia Generating Station Plant Operations Committee.

No new regulatory commitments are made in this letter. If you have any questions or require additional information, please contact Mr. R. M. Garcia at (509) 377-8463.

Executed on this day of

'2016.

R D. W. Gr egoire Manager, Regulatory Affairs and Performance Improvement

Enclosure:

As stated cc: NRC RIV NRC NRA Project Manager NRC Senior Resident Inspector

-988C CD Sonada -BPA -1399 (email w/o enclosures)

WA Horin -Winston & Strawn (email w/o enclosures)

CORE OPERATING LIMITS REPORT iT' r+ ++ ++ + + ++ ++ +.,. + + L+ COLUMBIA GENERATING STATION CYCLE 23 r+ + J. + ++ + "t" + ++ 1" ++ + ++ + "t + '1" = 1" .i. ll +-t-+ + ..... ++ '""+ + + L. T" -t" Revision 23.2 August2016

+I+ ++ .... , +I+ +1-++Y I ..... + ++ + .,.. , , ++ + +., .. ++ + u L-++ + ........., -r + + ++ + -= ++ $ D. ++ -+ + ...... ++ ++ + +I+ + ++ +H ?j1" + -. i--1 ++ 1-+ ++ + ..... -t-+ ++ ++ + .J u.. ENERGY NORTHWEST Columbia Generating Station Page 1 COLR-01, Revision

23.2 DESCRIPTION

OF CHANGES Justification The operating limits are established per Technical Specification (TS} 5.6.3a using NRC approved methodology listed in TS 5.6.3b. As required by TS 5.6.3c, the core operating limits are determined such that all applicable limits of the safety analysis are met. Page(s) Description (including summary, reason, initiating document, if applicable)

All

  • Title page and footers changed to align revision numbering with Asset Suite.
  • Document number changed from COLR 15-23 Rev 1 to COLR-01 Rev 23.2 for consistency with Asset Suite.
  • List of Effective pages eliminated and pages numbered continuously because individual page revision/insertion is not needed when entire document is re-issued with each revision.
  • Extra white space and page breaks eliminated to improve readability (no revision bars).
  • AR 279626279626 ENG-NFM-04 Rev 4 initiated these changes . 6,20 PROOS MCPR limit revised as a result of corrective action (AR 348320348320, for an error in the transient analysis (Reference 7.2, Supplemental Reload Licensing Report). Reference 7 .2 updated to document the source, which also documents use of approved methodology.

4 Table 1.1 title changed to Analytical Methods to match TS 5.6.3 usage. Columbia Generating Station Page 2 COLR-01, Revision 23.2 Table of Contents 1.0 Introduction and Summary ...............................................................................................

4 2.0 Average Planar Linear Heat Generation Rate (APLHGR) Limits for Technical Specification 3.2.1 ...........................................................................................

5 3.0 Minimum Critical Power Ratio (MCPR) Operating Limits for Technical Specification 3.2.2 ...........................................................................................................

6 4.0 Linear Heat Generation Rate (LHGR) Limits for Technical Specification 3.2.3 ..............................................................................................................................

13 5.0 Oscillation Power Range Monitor (OPRM) Instrumentation for Technical Specification 3.3.1.1 ......................................................................................................

18 6.0 Rod Block Monitor Instrumentation for Technical Specification 3.3.2.1 ..........................

19 7.0 References

....................................................................................................................

20 Columbia Generating Station Page 3 COLR-01, Revision 23.2

1.0 Introduction

and Summary This report provides the core operating limits for Average Planar Linear Heat Generation Rate (APLHGR), Minimum Critical Power Ratio (MCPR), Linear Heat Generation Rate (LHGR), Oscillation Power Range Monitor (OPRM) Instrumentation and Rod Block Monitor Instrumentation for Columbia Generating Station Cycle 23 as required by Technical Specification 5.6.3. As required by Technical Specification 5.6.3, these limits were determined using NRG-approved methodology and are established so that all applicable limits of the plant safety analysis are met. The specific topical report revisions and supplements which describe the methodology utilized in this cycle specific analysis are shown in Table 1.1. The reload licensing analyses for this cycle provide operating limits for Average Power Range Monitor I Rod Block Monitor and Technical Specifications Improvement Program (ARTS) and Maximum Extended Load Line Limit Analysis (MELLLA) operation which extends the power and flow operating regime for Columbia Generating Station up to the MELLLA boundary for Two Loop Operation (TLO). The core operating limits are applicable up to 100% of rated thermal power along and below the MELLLA boundary.

The minimum flow for operation at rated power is 80.7% of rated flow; the maximum is 106%. Single Loop Operation (SLO) is restricted to the Extended Load Line Limit Analysis (ELLLA) boundary.

The core operating limits for both TLO and SLO are applicable for normal feedwater temperature, feedwater heaters out of service, final feedwater temperature reduction and coastdown.

The Pressure Regulator Out of Service (PROOS) MCPR and LHGR limits are applicable if two (2) of the three (3) Digital Electro-hydraulic (DEH) pressure controllers are not functional.

The FSAR references the COLR for the most recent approved version of the General Electric Standard Application for Reactor Fuel (GESTAR II), which is listed in Table 1.1. The FSAR references the COLR for the most recent versions of the Supplemental Reload Licensing Report, the Fuel Bundle Information Report, and the GE14 and GNF2 Fuel Design Cycle-Independent Analyses, which are References 7.2, 7.3, 7.6 and 7.7. The FSAR references the COLR for the most recent version of the Reference Loading Pattern, which is documented in References 7.2 and 7.5. The FSAR references the COLR for the most recent versions of the GE14 and GNF2 Generic Compliance with GESTAR II, which are References 7.8 and 7.9. Table 1.1 Columbia Generating Station Reference Analytical Methods NEDE-24011-P-A and NEDE-24011-P-A-US, General Electric Standard Application for Reactor Fuel (GEST AR II) and Supplement for the United States, Revision 21, May 2015. Columbia Generating Station Page4 COLR-01, Revision 23.2

2.0 Average

Planar Linear Heat Generation Rate (APLHGR) Limits for Technical Specification 3.2.1 The APLHGR limits for use in Technical Specification 3.2.1, as a function of Average Planar Exposure, shall not exceed the limits shown in the following tables. APLHGR limits for single loop operation for GE14 and GNF2 fuel are obtained by applying a 1.00 multiplier to the two loop operation APLHGR limits. See Technical Specification 3.2.1 and the applicable Bases for further application details. a. Table 2.1 -GE14 Reload Fuel b. Table 2.2 -GNF2 Reload Fuel Table 2.1 Maximum Average Planar Linear Heat Generation Rate (MAPLHGR)

Versus Average Planar Exposure GE14 Reload Fuel Average Planar Exposure MAPLHGR Limit GWd/MTU GWd/ST kW/ft 0.00 0.00 12.82 21.10 19.14 12.82 63.50 57.61 8.00 70.00 63.50 5.00 (Reference

7.2 Table

16.3-1) Table 2.2 Maximum Average Planar Linear Heat Generation Rate (MAPLHGR)

Versus Average Planar Exposure GNF2 Reload Fuel Average Planar Exposure MAPLHGR Limit GWd/MTU GWd/ST kW/ft 0.00 0.00 13.78 18.92 17.16 13.78 67.00 60.78 6.87 70.00 63.50 5.50 (Reference

7.2 Table

16.3-2) Columbia Generating Station Page 5 COLR-01, Revision 23.2

3.0 Minimum

Critical Power Ratio (MCPR) Operating Limits for Technical Specification 3.2.2 The MCPR operating limits for use in Technical Specification 3.2.2 are determined by the larger of the flow dependent (MCPRf) and power dependent (MCPRp) limits from Table 3.1 through Table 3.7. See Technical Specification 3.2.2 and the applicable Bases for further application details. The MCPR safety limit for Cycle 23 is 1.10 for two loop operation (TLO) and 1.13 for single loop operation (SLO). The power and flow dependent MCPR limits for SLO require a 0.03 adder to the TLO MCPR limits due to the difference in the MCPR safety limit. Appl. Group 1 2 Table 3.1 MCPR Operating Limits Two Loop Operation 1 All Fuel Types Exposure Range 2 Option A Equipment In Serviceij Full Power Limits (BOC to MOC) 1.41 Full Power Limits (MOC to EOC) 1.41 Flow Dependent Limits 5 Power Dependent Limits 6 EOC RPT Out of Service (RPToosr Full Power Limits (BOC to MOC) 1.47 Full Power Limits (MOC to EOC) 1.47 Flow Dependent Limits 5 Power Dependent Limits 6 Non-Option 8 3 Pressurization Events 1'4 1.36 1.40 1.36 1.40 Table 3.7 Table 3.2 1.38 1.40 1.38 1.40 Table 3.7 Table 3.3 3 Turbine Bypass Valves Out of Service (TBVOOSt Full Power Limits (BOC to MOC} 1.46 1.40 Full Power Limits (MOC to EOC} 1.46 1.40 Flow Dependent Limits 5 Table 3.7 Power Dependent Limits 6 Table 3.4 4 TBVOOS and Full Power Limits (BOC to MOC} 1.53 1.42 . Full Power Limits (MOC to EOC) 1.53 1.42 Flow Dependent Limits 5 Table 3.7 Power Dependent Limits 6 Table 3.5 5 Pressure Regulator Out of Service (PROosr Full Power Limits (BOC to MOC) 1.41 1.36 1.40 Full Power Limits (MOC to EOC) 1.45 1.37 1.40 Flow Dependent Limits 5 Table 3.7 Power Dependent Limits 6*7 Table 3.6 (Reference 7 .2 Section 11 ) Columbia Generating Station Page 6 COLR-01, Revision 23.2 Note 1: Note 2: Note 3: Notes for Table 3.1 For Single Loop Operation (SLO), the SLMCPR increases by 0.03. This 0.03 increase must also be applied to the Two Loop Operation (TLO) MCPR Operating Limit to obtain the SLO Operating Limit. See Notes 5 and 6 for application details. (Reference 7 .2 Section 11 ) The cycle exposure range designation is defined in Table 3.1-1 for use in Table 3.1. End of Rated (EOR) is defined as the cycle exposure corresponding to all rods out, 100% power, 100% flow and normal feedwater temperature.

Table 3.1*1 Cycle Exposure Range Designation Name Exposure Range BOC to MOC s EOR-2373 MWd/MTU (2153 MWd/ST) MOC to EOC > EOR-2373 MWd/MTU (2153 MWd/ST) (Reference 7 .2 Section 7) The NRC has concluded that a statistical approach (Option B) may be used for pressurization events analyzed with TRACG (Reference 7.4, Section 7.5.2.6).

In order to take credit for conservatism in the scram speed performance, it must be demonstrated that there is insufficient reason to reject the plant-specific scram speed as being within the distribution assumed in the statistical analysis.

The procedure described below determines the full power MCPR limit based on the scram times of SR 3.2.2.2. If the scram speed distribution is not within the assumed distribution, the MCPR limit for pressurization events must be established based on an interpolation between the applicable limits for Option A (scram times of LCO 3.1.4, "Control Rod Scram Times") and Option B (realistic scram times) analyses.

The surveillance information for the fuel cycle is the number of active control rods measured for each surveillance test (the first test is at the BOC and is denoted N 1; the ;th test denoted Ni) and the average scram time to Notch 39 for the active rods measured in test i denoted Tj. The equation used to calculate the overall average of all the scram data generated to date in the cycle is: 11 LN;'f; 7: =-i=_l __ ave 11 LNi i=l where: n = number of surveillance tests performed to date in the cycle; (1) total number of active rods measured to date in the cycle; and Columbia Generating Station Page 7 COLR-01, Revision 23.2 i=I sum of the scram time to Notch 39 of all active rods measured to date in the cycle to comply with the Technical Specification surveillance requirements.

The average scram time, -c Ol\'., , is tested against the analysis mean using the following equation:

where: (2) TB =µ+1.65 (3) µ = 0.672 seconds (mean scram time to Notch 39 used in the Option B analysis) a = 0.016 seconds (standard deviation ofµ) N1 = total number of active rods measured at BOC to comply with the Technical Specification surveillance requirements.

If the cycle average scram time satisfies the Equation 2 criterion, continued plant operation under the Option B MCPR limits for pressurization events is permitted.

If not, the MCPR limits for pressurization events must be re-established, based on a linear interpolation between the Option Band Option A MCPR limits. The equation to establish the new operating limit is given below: OLMCPRNew

= (OLMCPROptionB

+ t"ave -TB (SSAF)J TA -TB (4) where: !'ave and Te = SSAF= OLMCPRoption A= OLMCPRoption B = Columbia Generating Station defined in Equations 1 and 3, respectively 0.866 seconds (the Technical Specification limit on core average scram time to Notch 39) OLMCPRoptionA

-OLMCPRoptiona (the difference between the MCPR calculated using Option A and that using Option B for pressurization events from Table 3 .1 ) the limiting pressurization event Option A MCPR limit the limiting pressurization event Option B MCPR limit Page 8 COLR-01, Revision 23.2 Note 4: Note 5: Note 6: Note 7: Note 8: If continued plant operation under the Option 8 MCPR limits for pressurization events is permitted, the Full Power Limit is the maximum of OLMCPRoption a and, if applicable, the Full Power Limit for Non-Pressurization Events. Otherwise, the Full Power Limit is the maximum of OLMCPRNew and, if applicable, the Full Power Limit for Non-Pressurization Events. (Reference 7 .2 Section 11) The Full Power Limit for Non-Pressurization Events is only applicable to SLO. The Full Power Limit for Non-Pressurization Events is specified when greater than the Option 8 Full Power Limit for Pressurization Events. See Note 3 for application guidance. (Reference

7.2 Section

11) Flow dependent MCPR limits (MCPRf) are applicable to TLO and require the SLO 0.03 adder when operating in SLO. Power dependent MCPR limits are provided for core thermal powers greater than or equal to 25% of rated power at all core flows. The power dependent MCPR limits for core thermal powers less than 30% of rated power are subdivided by core flow. Limits are provided for core flows greater than 50% of rated flow and less than or equal to 50% of rated flow. A step change in the power dependent MCPR limits occurs at 30% of rated power because direct scrams on turbine throttle valve closure and turbine governor valve fast closure are automatically bypassed below 30% of rated power and not applicable per Technical Specification 3.3.1.1. The power dependent MCPR limits in Tables 3.2 through 3.6 are provided as Kp multipliers above the direct scram bypass power level (Pbypass) and as absolute MCPRp limits below Pbypass. MCPRp limits above Pbypass are determined through the following equation:

MCPRp = Kp x (Full Power Limit). Power dependent MCPR limits are applicable to TLO and require the SLO 0.03 adder when operating in SLO. (Reference

7.2 Appendix

D) A step change in the power dependent MCPR limits occurs at 85% of rated power because the APRM Neutron Flux -High scram is limiting at and above 85% and the Reactor Vessel Steam Dome Pressure -High scram is limiting below 85%. MCPR operating limits for Application Groups 1, 2 and 5 remain applicable for one bypass valve out of service. For two or more bypass valves out of service, Application Groups 3 and 4 are applicable.

Columbia Generating Station Page9 COLR-01, Revision 23.2 Table 3.2 Columbia Generating Station Application Group 1: Equipment In Service TLO Power Dependent MCPR Limits Limits for Power < 30.0% Power(%) 25.0 30.0 Limits for 30.0% Power(%) 30.0 45.0 60.0 85.0 100.0 All F IT ue ypes Limit for Flow > 50.0% MCPRp 2.32 2.27 Table 3.3 Columbia Generating Station Limit for Flow S 50.0% MCPRp 2.29 2.23 Limit Kp 1.483 1.280 1.150 1.072 1.000 Application Group 2: EOC RPT Out of Service (RPTOOS) TLO Power Dependent MCPR Limits All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow> 50.0% Limit for Flow S 50.0% MCPRp MCPRp 25.0 2.32 2.29 30.0 2.27 2.23 Limits for 30.0% Power(%) Limit Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Columbia Generating Station Page 10 COLR-01, Revision 23.2 Table 3.4 Columbia Generating Station Application Group 3: Turbine Bypass Valve Out of Service (TBVOOS) TLO Power Dependent MCPR Limits All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow > 50.0% Limit for Flow S 50.0% MCPRp MCPRp 25.0 3.53 3.28 30.0 3.10 2.87 Limits for 30.0% Power(%) Limit Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Table 3.5 Columbia Generating Station Application Group 4: TBVOOS and RPTOOS TLO Power Dependent MCPR Limits All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow> 50.0% Limit for Flow S 50.0% MCPRp MCPRp 25.0 3.53 3.28 30.0 3.10 2.87 Limits for 30.0% Power(%) Limit Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Columbia Generating Station Page 11 COLR-01, Revision 23.2 Table 3.6 Columbia Generating Station Application Group 5: Pressure Regulator Out of Service (PROOS) TLO Power Dependent MCPR Limits All Fuel Types Limits for Power< 30.0% Power(%) Limit for Flow > 50.0% MCPRp 25.0 2.32 30.0 2.27 Limits for Power=:::

30.0% Power(%) 30.0 45.0 60.0 85.0 85.0 100.0 Flow(%) 30.0 90.0 108.5 Columbia Generating Station Table 3.7 Columbia Generating Station All Application Groups TLO Flow Dependent MCPR Limits All Fuel Types Page 12 Limit for Flow S 50.0% MCPRp 2.29 2.23 Limit Kp 1.483 1.367 1.316 1.197 1.094 1.000 Limit MCPRf 1.68 1.27 1.27 COLR-01, Revision 23.2

4.0 Linear

Heat Generation Rate (LHGR) Limits for Technical Specification 3.2.3 The LHGR limits for use in Technical Specification 3.2.3 are provided as a function of pellet exposure, power and flow for GE14 and GNF2 fuel. The LHGR limits shall not exceed the product of the exposure dependent LHGR limit and the minimum of the power dependent LHGR Factor (LHGRFACp) or the flow dependent LHGR Factor (LHGRFACf).

a. The exposure dependent LHGR limits are provided in the Fuel Bundle Information Report (Reference 7.3) for GE14 and GNF2. b. The power dependent LHGR Factor (LHGRFACp) is provided in Table 4.1 through Table 4.5 for all fuel types. (Reference 7.2, Appendix D) c. The flow dependent LHGR Factor (LHGRFACf) is provided in Table 4.6 for all fuel types. (Reference 7.2, Appendix D) See Technical Specification 3.2.3 and the applicable Bases for further application details. Columbia Generating Station Page 13 COLR-01, Revision 23.2 Table 4.1 Columbia Generating Station Application Group 1: Equipment In Service Power Dependent LHGR Factor (LHGRFACp)

All Fuel Types Limits for Power< 30.0% Power(%) 25.0 30.0 Limits for 30.0% Power(%) 30.0 45.0 60.0 85.0 100.0 Limit for Flow > 50.0% LHGRFACp 0.540 0.540 Table 4.1a Columbia Generating Station Limit for Flow S 50.0% LHGRFACp 0.540 0.540 Limit LHGRFACp 0.634 0.713 0.791 0.922 1.000 Application Group 1a: One Bypass Valve Out of Service (1TBVOOS)9 Power Dependent LHGR Factor (LHGRFACp)

All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow> 50.0% Limit for Flow S 50.0% LHGRFACp LHGRFACp 25.0 0.485 0.485 30.0 0.485 0.485 Limits for 30.0% Power(%) Limit LHGRFACp 30.0 0.634 45.0 0.713 60.0 0.791 85.0 0.922 100.0 1.000 9 LHGRFACp limits for Application Groups 1a, 2a and 5 remain applicable for one bypass valve out of service. For two or more bypass valves out of service, Application Groups 3 and 4 are applicable.

Columbia Generating Station Page 14 COLR-01, Revision 23.2 Table 4.2 Columbia Generating Station Application Group 2: EOC RPT Out of Service (RPTOOS) Power Dependent LHGR Factor (LHGRFACp)

All Fuel Types Limits for Power< 30.0% Power(%) Limit for Flow> 50.0% Limit for Flow S 50.0% LHGRFACp LHGRFACp 25.0 0.540 0.540 30.0 0.540 0.540 Limits for 30.0% Power(%) Limit LHGRFACp 30.0 0.634 45.0 0.713 60.0 0.791 85.0 0.922 100.0 1.000 Table 4.2a Columbia Generating Station Application Group 2a: RPTOOS and 1TBVOOS 9 Power Dependent LHGR Factor (LHGRFACp)

All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow > 50.0% Limit for Flow S 50.0% LHGRFACp LHGRFACp 25.0 0.485 0.485 30.0 0.485 0.485 Limits for 30.0% Power(%) Limit LHGRFACp 30.0 0.634 45.0 0.713 60.0 0.791 85.0 0.922 100.0 1.000 Columbia Generating Station Page 15 COLR-01, Revision 23.2 Table 4.3 Columbia Generating Station Application Group 3: Turbine Bypass Valve Out of Service {TBVOOS)9 Power Dependent LHGR Factor (LHGRFACp)

All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow> 50.0% Limit for Flow S 50.0% LHGRFACp LHGRFACp 25.0 0.390 0.433 30.0 0.425 0.433 Limits for 30.0% Power(%) Limit LHGRFACp 30.0 0.634 45.0 0.713 60.0 0.735 85.0 0.922 100.0 1.000 Table 4.4 Columbia Generating Station Application Group 4: TBVOOS and RPTOOS 9 Power Dependent LHGR Factor (LHGRFACp)

All Fuel Types Limits for Power < 30.0% Power(%) Limit for Flow > 50.0% Limit for Flow S 50.0% LHGRFACp LHGRFACp 25.0 0.390 0.433 30.0 0.425 0.433 Limits for 30.0% Power(%) Limit LHGRFACp 30.0 0.634 45.0 0.713 60.0 0.735 85.0 0.922 100.0 1.000 Columbia Generating Station Page 16 COLR-01, Revision 23.2 Table 4.5 Columbia Generating Station Application Group 5: Pressure Regulator Out of Service (PROOS) 9*10 Power Dependent LHGR Factor (LHGRFACp)

Limits for Power < 30.0% Power(%) 25.0 30.0 Limits for 30.0% Power(%) 30.0 45.0 60.0 85.0 85.0 100.0 All Fuel Types Limit for Flow > 50.0% LHGRFACp 0.540 0.540 Table 4.6 Columbia Generating Station All Application Groups Limit for 50.0% LHGRFACp 0.540 0.540 Limit LHGRFACp 0.634 0.672 0.728 0.728 0.909 1.000 Flow Dependent LHGR Factor (LHGRFACf)

All Fuel Types Flow(%) Limit LHGRFACf 30.0 0.592 50.0 0.761 80.0 0.966 85.0 1.000 108.5 1.000 10 A step change in LHGRFACp occurs at 85% of rated power because the APRM Neutron Flux -High scram is limiting at and above 85% and the Reactor Vessel Steam Dome Pressure -High scram is limiting below 85%. Columbia Generating Station Page 17 COLR-01, Revision 23.2

5.0 Oscillation

Power Range Monitor (OPRM) Instrumentation for Technical Specification 3.3.1.1 5.1 Period Based Detection Algorithm (PBDA) trip setpoints for Technical Specification Table 3.3.1.1-1, Footnote (g) and THERMAL POWER value for use in Table 3.3.1.1-1, Footnote (f). See Technical Specification 3.3.1.1 and the applicable Bases for further application details. FUNCTION 2 Average Power Range Monitors f. OPRM Upscale Amplitude Trip (Sp) Confirmation Count (Np) (f) THERMAL POWER 20% RTP APPLICABLE MODES OR OTHER SPECIFIED CONDITIONS (f) TRIP SETPOINT 1.15 Peak/Average 16 (Reference 7.2, Section 15.2; Reference 7.1, Table 3-2, Item 8.9) 5.2 THERMAL POWER value for Techn i cal Specificat i on 3.3.1.1, Required Action J.1: THERMAL POWER < 20% RTP (Reference 7.1, Table 3-2, Item 8.9) 5.3 OPRM Not Bypassed setpoints for SR 3.3.1.1.17 APRM Simulated Thermal Power (Pb) 25 % Recirculation Drive Flow (Wb) < 60 % Columbia Generating Station Page 18 (Reference 7.2, Section 15.3) (Reference 7.1, Table 3-2, Item 8.9) COLR-01, Revision 23.2 6.0 Rod Block Monitor Instrumentation for Technical Specification 3.3.2.1 6.1 Rod Block Monitor Instrumentation for Technical Specification Table 3.3.2.1-1, Footnote (f)and Licensee Controlled Specifications Table 1.3.2.1-2 and Appendix A. See Technical Specification 3.3.2.1 and the applicable Bases for further application details. FUNCTION 1 Rod Block Monitor a. Low Power Range-Upscale b. Intermediate Power Range -Upscale c. High Power Range -Upscale LIMITING TRIP SETPOINT 121.2 116.2 111.2 ALLOWABLE VALUE 121.6 116.6 111.6 (Reference 7.1, Table 3-2, Item 10.7) 6.2 Rod Block Monitor (RBM) Instrumentation MCPR limits for Technical Specification Table 3.3.2.1-1, Footnotes (a), (b) and (c). See Technical Specification 3.3.2.1 and the applicable Bases for further application details. THERMAL POWER Columbia Generating Station <90%RTP ;;::: 90 % RTP Page 19 RBM MCPR Limit 1.70 1.40 (Reference 7.2, Section 10) COLR-01, Revision 23.2

7.0 References

7 .1 Design Specification for Division 60, "Reactor Core and System Analysis Parameters for Columbia Generating Station." 7 .2 002N761 O-R3, "Supplemental Reload Licensing Report for Columbia Reload 22 Cycle 23," April 2016. 7 .3 OOON9006-R1, "Fuel Bundle Information Report for Columbia Reload 22 Cycle 23," February 2015. 7.4 NEDE-32906P-A, Revision 3, TRACG Application for Anticipated Operational Occurrences (AOO) Transient Analyses," GE Nuclear Energy, September 2006. 7.5 CVI 981-01,14, Revision 2, Reference Loading Pattern Cycle 23. 7 .6 GEH-0000-0075-4920-R5, "GE14 Fuel Design Cycle-Independent Analyses for Energy Northwest Columbia Generating Station", March 2015. 7.7 002N3439, Revision 1, GNF2 Fuel Design Cycle-Independent Analyses for Energy Northwest Columbia Generating Station, June 2015. 7.8 NEDC-32868P, Revision 5, "GE14 Compliance with Amendment 22 of NEDE-24011-P-A (GESTAR II)," May 2013. 7.9 NEDC-33270P, Revision 5, "GNF2 Advantage Generic Compliance with NEDE-24011-P-A (GESTAR II)," May 2013. Columbia Generating Station Page 20 COLR-01, Revision 23.2

Retrieved from "https://kanterella.com/w/index.php?title=ML16363A452&oldid=1082471"