GO2-13-082, Cycle 22 Core Operating Limits Report (Colr), Revision 0
| ML13179A354 | |
| Person / Time | |
|---|---|
| Site: | Columbia  |
| Issue date: | 06/14/2013 |
| From: | Gregoire D Energy Northwest |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| GO2-13-082 | |
| Download: ML13179A354 (20) | |
Text
Donaid W.Gregoire Regulatoiy Affais P.O. Box 968, Mail Drop PE20 RWcAnWd, WA 99352-0968 Ph. 609-377-8618 I F. 509-377-4317 dwgregod***g-wsst.com June 14, 2013 G02-13-082 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001
Subject:
COLUMBIA GENERATING STATION, DOCKET NO 50497 CYCLE 22 CORE OPERATING LIMITS REPORT (COLR), REVISION 0
Dear Sir or Madam:
In accordance with the Columbia Generating Station Technical Specifications (TS) 5.6.3.d, Energy Northwest herewith submits the Cycle 22 COLR, Revision 0. The operating limits in the COLR were developed in accordance with the requirements of TS 5.6.3.a, b, and c.
The changes to the COLR have been reviewed by the Columbia Generating Station Plant Operations Committee.
No new regulatory commitments are made in this letter. Should you have any questions or desire additional information regarding this matter, please contact Ms. Usa Williams at (509) 377-8148.
Respectfull DW Gregoire Manager, Regulatory Affairs
Enclosure:
COLR 13-22 Revision 0 cc: NRC Region IVAdministrator NRC NRR Project Manager NRC Senior Resident Inspector/988C AJ Rapacz - BPA/1 399 WA Horin - Winston & Strawn Aec
COLR 13-22 Revision 0 Cokimmla Gonwathig Sttion CycI.22 co.g Operatin imit. RPA rt March 2013
Columbia Generating Station Cycle 22 Core Operating Limits Report Ust of Effecve Pages E6AE REVISION 2 .................................................................................................. 0 3........................................... ....................................................... 0 4 .................................................................................................. 0 5................................................................................................... 0 68........................................................................................ .......... 0 7.................................................................................................. 0 8 .................................................................................................. 0 9................................................................................................... 0 10 .................................................................................................. 0 11 .................................................................................... .............. 0 12 .................................................................................................. 0 13 .................................................................................................. 0 14........................................... ....................................................... 0 15....................................................... I........................................... 0 16 .................................................................................................. 0 Columbia Generating Station LEP-1 COLR 13-22 Revision 0
Columbia Generating Station Cycle 22 Core Operating Limits Report TaWl of Contents 1.0 Introduction and Summary ............................................................................................... 1 2.0 Average Planar Linear Heat Generation Rate (APLHGR) Limits for Use in Technical Specification 3.2.1 ...................................................................... 3 3.0 Minimum Critical Power Ratio (MCPR) Operating Limits for Use in Technical Specification 3.2.2 ................................................................................ 5 4.0 Linear Heat Generation Rate (LHGR) Limits for Use in Technical Specification 3.2.3 .................................................................................................... 13 5.0 Oscillation Power Range Monitor (OPRM) Instrumentation Limits for Use in LCO 3.3.1.3 ............................................................................................. 15 6.0 References .............................................................................................................. 16 Columbia Generating Station i COLR 13-22 Revision 0
1.0 Introduction and Summary This report provides the Average Planar Linear Heat Generation Rate (APLHGR) limits, the Minimum Critical Power Ratio (MCPR) limits, the Linear Heat Generation Rate (LHGR) limits and the OscIllation Power Range Monitor (OPRM)
Instrumentation limits for Columbia Generating Station Cycle 22 as required by Technical Specification 5.6.3. As required by Technical Specification 5.6.3, these limits were determined using NRC-approved methodology and are established so that all applicable limits of the plant safety analysis are met. LOCA analyses were performed with methodologies that result in Single Loop Operation (SLO) APLHGR limits as well as Two Loop Operation (TLO) APLHGR limits, The APLHGR and LHGR limits for ATRIUM-10 fuel given in this report are documented in Reference 6.1. The APLHGR limits for GE14 fuel given in this report are documented in Reference 6.4. The LHGR limits for GEI4 fuel given in this report are documented in References 6.5 and 6.10. The full power MCPR limits for all Cycle 22 fuel types (GE14 as well as ATRIUM-10 fuel) are documented in Reference 6.4. The power and flow dependent MCPR limits are documented in Reference 6.6. The basis for the OPRM Instrumentation limits is documented in References 6.3 and 6.4.
The MCPR limit is the maximum of (a) the applicable exposure dependent, full power MCPR limit, (b) the applicable power dependent MCPR limit, and (c) the applicable flow dependent MCPR limit specified in this report. This stipulation assures that the safety limit MCPR will not be violated during steady-state operation and anticipated operational occurrences throughout the Columbia Generating Station operating regime. Full power MCPR limits are specified to define operating limits at rated power and flow. Power dependent MCPR limits are specified to define operating limits at other than rated power conditions. A flow dependent MCPR is specified to define operating limits at other than rated flow conditions. The flow dependent MCPR limit, set by the limiting Recirculation Flow Increase event, provides bounding protection for all events at reduced flow.
The LHGR limit Is the minimum of (a) the applicable, exposure dependent, specified LHGR limit for that bundle type and (b) the applicable power dependent LHGR limit. The Pressure Regulator Out of Service (PROOS) MCPR and LHGR limits are applicable if two (2) of the three (3) Digital Electro-hydraulic (DEH) pressure controllers are not functional.
The reload licensing analyses for this cycle provide operating limits for Extended Load Line Limit Analysis (ELLLA) operation which extends the power and flow operating regime for Columbia Generating Station up to the 108% rod line which at full power corresponds to 88% of rated flow. The MCPR limits defined in this report are applicable up to 100% of rated thermal power a"ong and below the 108% rod line. The minimum flow for operation at rated power is 88% of rated flow; the maximum is 106%.
The Reference Loading Pattern referenced in FSAR 4.3.2 is documented in References 6.4 and 6.9.
The specific topical report revisions and supplements which describe the methodology utilized in this cycle specific analysis are shown in Table 1.1.
Columbia Generating Station . COLR 13-22 Revision 0
Table 1.1 Colmbia Generating Station Rfterence Topical Reports
- 1. XN-NF-81-68(PXA) Revision 2 and Supplements I and 2, RODEX2 Fuel Rod Thermal-Mechanical Response Evaluation Model, Exxon Nuclear Company, March 1984.
- 2. XN-NF-85-67(PXA) Revision 1, Generic MechanicalDesign for Exxon Nuclear Jet Pump BWR Reload Fuel, Exxon Nuclear Company, September 1986.
- 3. EMF-85-74(P) Revision 0 Supplement I (P)(A) and Supplement 2(PXA), RODEX2A (BWR) Fuel Rod Thermal-MechanicalEvaluationModel, Siemens Power Corporation, February 1998.
- 4. ANF-89-98(PXA) Revision I and Supplement 1, Generic Mechanical Design Criteriafor BWR Fuel Designs, Advanced Nuclear Fuels Corporation, May 1995.
- 6. EMF-2292(PXA) Revision 0, A TRIUM!- O Appendix K Spray Heat Tranafer Coefficients, Siemens Power Corporation, September 2000.
- 7. NEDO-32465-A, BWR Ownera' Group Reactor Stability Detect and Suppress Solutions Licensing Basis Methodology andReload Applications, August 1996.
- 8. NEDC-33419P, GEXL97 CorrelationApplicable to ATRIUM-10 Fuel, Revision 0, June 2008.
- 9. NEDE-2401 1-P-A and NEDE-2401 1-P-A-US, GeneralElectric StandardApplication for Reactor Fuel (GESTAR 11) and Supplement for the United States, Revision 19, May 2012.
Columbia Generating Station COLR 13-22 Revision 0
2.0 Average Planar Unear Heat Generation Raft (APLHGR) Limit. for U" in Technical Specification 3.2.1 The APLHGR limits for use in Technical Specification 3.2.1, as a function of Average Planar Exposure, shall not exceed the limits shown in the following tables. APLHGR limits for single loop operation for GE14 fuel are obtained by applying a 1.00 multiplier to the two loop operation APLHGR limits. APLHGR limits for single loop operation for ATRIUM-10 fuel are obtained by applying a 0.90 multiplier to the two loop operation APLHGR limits.
- a. Table 2.1 - GE14 Reload Fuel
- b. Table 2.2 - ATRIUM-10 Reload Fuel Columbia Generang Station COLR 13-22 Revision 0
Table 2.1 Maximum Average Planar Linear Heat Generation Rat (MAPLHGR)
Versus Average Planar Exposure GE14 Reload Fuel Average Planar Exposure MAPLHGR Limit GWdIMTU OWdIST IW/R 0.00 0.00 12.82 16.00 14.51 12.82 21.10 19.14 12.82 63.50 57.61 8.00 70.00 63.50 5.00 Table 2.2 Maximum Average Planar Linear Heat Generation Rate (MAPLHGR)
Versus Averae Planar Exposure ATRIUM-1O Reload Fuel Averae Planar TLO Exposure MAPLIGR (MWd"MT") (kW/ft) 0 12.5 15000 12.5 67000 7.3 Columbia Generating Station 4COR122eiso0 COLR 13-22 RwAslon 0
3.0 Minimum Critical Power Ratio (MCPR) Operating Limits for Use In Technical Specification 3.2.2 The MCPR operating limits for use in Technical Specification 3.2.2 shell be greater than or equal to the bounding limits determined from Table 3.1 through Table 3.7.
The MCPR safety limit for Cycle 22 is 1.09 for two loop operation (TLO) and 1.10 for single loop operation (SLO). The power and flow dependent MCPR limits for SLO require a 0.01 adder to the TLO MCPR limits due to the difference In the MCPR safety limit.
Columbia Generating Station Is" COLR 13-22 Revision 0
Table 3.1 Columbia Generating Station Two Loop Operation, MCPR Operaft Limit Group Exposure Range Option A Option BW All Fuel Al Fuel I Equipment In Service Full Power Limits (BOC to MOC) 1.42 1.39 Full Power Limits (MOC to EOC) 1.44 1.41 Flow Dependent Limits' Table 3.7 Power Dependent Liits5 Table 3.2 2 EOC RPT Out of Service .PTOOS)
Full Power Lmits (BOC to MOC) 1.54 1.43 Full Power Limits (MOC to EOC) 1.63 1.46 Flow Dependent Limits' Table 3.7 Power Dependent Limits 5 Table 3.3 3 Turbine Bypass Valve Out of iSermi (TBVOOS)
Full Power Limits (BOO to MOO) 1.44 1.41 Full Power Limits (MOC to EOC) 1.48 1.45 Flow Dependent Limits' Table 3.7 Power Dependent Limits 5 Table 3.4 4 TBVOOS and RPTOOS Full Power Limits (BOC to MOC) 1.57 1.46 Full Power Limits (MOC to EOC) 1.68 J 1.51 Flow Dependent Limits' Table 3.7 Power Dependent Limits 5 Table 3.5 5 Pressure Regulator Out of Service (PROOS)
Full Power Limits (BOC to MOC) 1.42 1.39
_____Full Power Limits (MOO to EOC) 1.49 1.41 Flow Dependent Limits' Table 3.7 Power Dependent Limits 5 6. Table 3.6 Columbia Generating Station COLR 13-22 Revision 0
Notes for Table 3.1 Note 1: For Single Loop Operation (SLO), the SLMCPR increases by 0.01. This 0.01 increase must also be applied to the Two Loop Operation (TLO) MCPR Operating Limit to obtain the SLO Operating Limit.
Note 2: The cycle exposure range designation is defined in Table 3.1-1. End of Rated (EOR) is defined as the cycle exposure corresponding to all rods out, 100% power, 100% flow and normal feedwater temperature. The limits are applicable for normal feedwater temperature, feedwater heaters out of service, final feedwater temperature reduction and coastdown.
Table 3.1-1 Cycle Exposure Range Desigation Name Exposure Range "BOC to MO . 1.EOR-2344 (212 MWd/ST) .Wd/MTU MOC to EOC > EOR-2344 MWd/MTU (2126 MWdIST)
Note 3: The NRC has concluded that a statistical approach (Option B) may be used for pressurization events analyzed with ODYN (References 6.7 and 6.8). In order to take credit for conservatism In the scram speed performance, it must be demonstrated that there Is insufficient reason to reject the plant-specific scram speed as being within the distribution assumed in the statistical analysis.
The procedure described below determines the full power MCPR limit based on the scram times of SR 3.2.2.2. If the scram speed distribution is not within the assumed distribution, the MCPR for pressurization events must be re-established based on an interpolation between the applicable limits for Option A (scram times of LCO 3.1.4, *Control Rod Scram Times") and Option B (realistic scram times) analyses.
The surveillance information for the fuel cycle is the number of active control rods measured for each surveillance test (the first test is at the BOC and is denoted N1; the r test denoted NI) and the average scram time to Notch 39 for the active rods measured in test I denoted ri.
The equation used to calculate the overall average of all the scram data generated to date in the cycle is:
R N1 r, S='i (1) 1'=!
Columbia Generating Station -7. COLR 13-22 Revision 0
where:
n= number of surveillance tests performed to date in the cycle; IN= total number of active rods measured to date in the cycle; and sum of the scram time to Notch 39 of all active
=:r rods measured to date in the cycle to comply with the Technical Specification surveillance requirements.
The average scram time, -r,, is tested against the analysis mean using the following equation:
ta,: r,9 (2) where:
1.157
~=
I N+ /
(3)
XNj S= 0.672 seconds (mean scram time to Notch 39 used in the Option B analysis) 0.016 seconds (standard deviation of A)
N,= total number of active rods measured at BOC to comply with the Technical Specification surveltance requirements.
If the cycle average scram time satisfies the Equation 2 criterion, continued plant operation under the ODYN Option 8 MCPR for pressurization events is permitted.
If not, the MCPR for pressurization events must be re-established, based on a linear interpolation between the Option B and Option A MCPRs.
The equation to establish the new operating limit is given below:
OLMCPR A.=MCPR,., +r"---
T _B rA PR (4)
Columbia Generating Station COLR 13-22 Revision 0
where:
r,, and r = defined in Equations I and 3, respectively
- A= 0.866 seconds (the Technical Specification limit on core average scram time to Notch 39)
AMCPR = MCPRQ, A - MCPRow a (the difference between the MCPR calculated using Option A and that using Option B for pressurization events from Table 3.1)
MCPPROpA = the limiting pressurization event Option A MCPR MCPRop*,4a = the limiting pressurization event Option B MCPR Note 4: Flow dependent MCPR limits are applicable to TLO and require the SLO 0.01 adder when operating in SLO.
Note 5: Power dependent MCPR limits are provided for core thermal powers greater than or equal to 25% of rated power at al core flows. The power dependent MCPR limits for core thermal powers less than 30% of rated power are subdivided by core flow. Limits are provided for core flows greater than 50% of rated flow and less than or equal to 50% of rated flow. A step change in the power dependent MCPR limits occurs at 30% of rated power because direct scrams on turbine throttle valve closure and turbine governor valve fast closure are automatically bypassed below 30% of rated power and not applicable per Technical Specification 3.3.1.1.
The power dependent MCPR limits in Tables 3.2 through 3.6 are provided as Kp multipliers above the direct scram bypass power level (Pbypass) and as absolute MCPRp limits below Pbypass. MCPRp limits above Pbypass are determined through the following equation: MCPRp = Kp x OLMCPR(Full Power Limit). Power dependent MCPR limits are applicable to TLO and require the SLO 0.01 adder when operating in SLO.
Note 6: A step change in the power dependent MCPR limits occurs at 85% of rated power because the APRM Fixed Neutron Flux - High scram is limiting at and above 85%
and the Reactor Vessel Steam Dome Pressure - High scram is limiting below 85%.
Columbia Generating Station COLR 13-22 Revision 0
Table 3.2 Colubla Generatkng Staon Applicafton Group 1: Equipment In Service TLO Power Dpendent MCPR Umits All Fuel Types L,,, for P~r <3. 0.
Power (%) Limit for Flow > 50.*/ Limt for Flow <50.0%
_CP)?p MCPRp 25.0 2.30 2.27 30.0 2.25 2.21 Limits for POw ?..3A 0%
Power (%) Limit
_ _ __ _ _ _ _ __ __ _ _ _Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Table 3.3 Counbl. Goeneraft Sttlon Application Group 2: EOC RPT Out of Service (RPTOOS)
TLO Powter O Dxeent MCPR Umits All Fuel Types Limits for Power < 3&0%
Power (%)Um for Flow> 5019 Lmit for Flow, 550.0%
MCPRp MCPRp 25.0 2.30 2.27 30.0 2.25 2.21 Limits for PA ,r> 3?_.0%
Power (%) Limit
_ _ __ _ _ _ _ __ __ _ _ _Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Cokirmbie Geneating Station --010- OR1-2Rvso COLR 13-22 Revision 0
Table 3A Columbia Generating S lon Application Group 3: Turbine Bypas Valve Out of Service (TBVOOS)
TLO Power Dependent MCPR ULmits All Fuel Types Limitsfor Powr <39AM Power (%) Lit for Flow > 50.*/! Limit br Flow < 5O.0%
MCPRp MCPRP 25.0 3.50 3.25 30.0 3.07 2.84 Li for Powe > 3&.6% _ _ _ _ _ _ _ __ _
Power (%) Limit Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Table 3.5 Columbia Generating Station Application Group 4: T8VOOS and RPTOOS TLO Power Oependent MCPR Umits All Fuel Types Limits for Power <3.*%
Power (%) Limit for Flow > 50.0% Limit for Flow <5000/
MCPRp MCPRp 25.0 3.50 3.25 30.0 3.07 2.84 Limis for Power > 30%0%
Power (%) Limit Kp 30.0 1.483 45.0 1.280 60.0 1.150 85.0 1.072 100.0 1.000 Columbia Generating Station COLR 13-22 Revision 0
Table 3.6 Columbia Generating Station Application Group 5: Pressure Regulator Out of Service (PROOS)
TLO Power Dependent MCPR imits All Fuel Types Limits for Power< A.0%
Power (%) Limit for Flow > SO-.% Uimt for Flow < 50.0%
MCPR* MCPRp 25.0 2.30 2.27 30.0 1 2.25 2.21 Libi for Power ?: 30.0_
Power (%) Limit Kp 30.0 1.761 45.0 1.570 60.0 1.468 85.0 1.327 85.0 1.099 100.0 1.000 Table 3.7 Columbia Generating Station All Application Groups TLO Flow Dependent MCPR Umits All Fuel Types Flow (%) Limit WcPRf 0.0 1.85 30.0 1.65 90.0 1.25 108.5 1.25 Columbia Generating Stato COLR 13-22 Revision 0
4.0 Linear Heat Generaton Rate (LHGR) Limits for Use In Technical Specification 3.2.3 The LHGR limits for use in Technical Specification 3.2.3 are given as a function of pellet exposure for both the GE14 and ATRIUM-10 fuel. The LHGR limits shall not exceed the limits shown in the following:
- a. Fuel Bundle Information Report (References 6.5 and 6.10) for GE14 Reload Fuel
- b. Table 4.1 for ATRIUM-10 Reload Fuel C. Table 4.2 for all fuel types with Pressure Regulator Out of Service (PROOS)
Columbia Generting Station COLR 13-22 Revislori 0
Table 4.1 Unear Heat Generation Rate (LHGR)
Versus Pellet Exposure ATRUM-10 Reload Fuel Pelet Exposure LUGR (MW T#U) (kWIft) 0 13.4 180ow 13.4 74400 7.1 Table 4.2 Pressure Regulator Out of Servi (PROOS)
Power Dependent LHGR Lmits AI Fuel Types Power (%) LIM*
MFLPD 30.0 0.634 45.0 0.672 60.0 0.728 85.0 0.728 85.0 0.909 100.0 1.000 Note 1: Power dependent LHGR limits are provided for core thermal powers greater than or equal to 30% ofrated power. A step change in the power dependent LHGR limits occurs at 85% of rated power because the APRM Fixed Neutron Flux - High scram is limiting at and above 85% and the Reactor Vessel Steam Dome Pressure
- High scram is limiting below 85%.
Columbia Generating Station COLR 13-22 Revision 0
5.0 Oscillation Power Range Monitor (OPRM) Instrumenton Limft for Use In LCO 3.3.1.3 The OPRM instrumentatio limits for use in LCO 3.3.1.3 shall not exceed the following:
Function 7 Trip 8etpoint Period Based Detection Algorithm (PBDA)
Amplitude Setpoint: Sp 1.11 Peak/Average Confirmation Count Setpoint: N2 14 Columbia Generating Station -Is- COLR 13-22 R&vWm 0
6.0 References 6.1 ANP-2602 Revision 0, "Columbia Generating Station Cycle 19 Reload Analysis,"
AREVA NP, March 2007.
6.2 EMF-3172(P) Revision 1, "Columbia Generating Station LOCA-ECCS Analysis MAPLHGR Limit for ATRIUM'm-10 Fuel," Framatome ANP, June 2005.
6.3 NE-02-00-03, Revision 1, "Oscillation Power Range Monitor (OPRM) Trip Setpoints," Energy Northwest, May 13, 2009.
6.4 0000-0157-5351 -SRLR, "Supplemental Reload Licensing Report for Columbia Reload 21 Cycle 22," Revision 0, February 2013.
6.5 0000-0157-5351-FBIR, "Fuel Bundle Information Report for Columbia Reload 21 Cycle 22," Revision 0, February 2013.
6.6 GEH-0000-0075-4920-R4, "GEI4 Fuel Design Cycle-Independent Analyses for Energy Northwest Columbia Generating Station," Revision 4, February 2013.
6.7 NEDO-24154 and NEDE-24154-P, "Qualification of the One-Dimensional Core Transient Model for Boiling Water Reactors", Volumes 1, 2 and 3, August 1986.
6.8 Letter JSC-005-86 (MFN.003-86), J. S. Chamley (GE) to H. N. Berkow (NRC),
"Revised Supplementary Information Regarding Amendment 11 to GE Licensing Topical Report NEDE-2401 1-P-A", January 16, 1986.
6.9 CVI 981-01,14, Revision 1, Reference Loading Pattern Cycle 22.
6.10 0000-0098-0322-FBIR, "Fuel Bundle Information Report for Columbia Reload 19 Cycle 20," Revision 1, April 2009, Appendix C.
Codwmbia Generating Station COLR 13-22 Revision 0