|
|
| (2 intermediate revisions by the same user not shown) |
| Line 3: |
Line 3: |
| | issue date = 01/08/1997 | | | issue date = 01/08/1997 |
| | title = LER 96-035-00:on 961210,inadequate Testing Load Shed Verification Occurred.Caused by Inadequate Controls for Development & Maint of TSs Procedures.Load Shed Feature Satisfactorily Tested & Procedures revised.W/970108 Ltr | | | title = LER 96-035-00:on 961210,inadequate Testing Load Shed Verification Occurred.Caused by Inadequate Controls for Development & Maint of TSs Procedures.Load Shed Feature Satisfactorily Tested & Procedures revised.W/970108 Ltr |
| | author name = GARCHOW D F, HASSLER D V | | | author name = Garchow D, Hassler D |
| | author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | | | author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY |
| | addressee name = | | | addressee name = |
| Line 16: |
Line 16: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:- | | {{#Wiki_filter:OPS~G - |
| * Public Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038-0236 Nuclear Business Unit 0 8 1997 LR-N97025 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 LER 272/96-035-00 SALEM GENERATING STATION -UNIT 1 FACILITY OPERATING LICENSE NO. DPR-70 DOCKET NO. 50-272 Gentlemen: | | * Public Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038-0236 Nuclear Business Unit J1~N 0 8 1997 LR-N97025 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 LER 272/96-035-00 SALEM GENERATING STATION - UNIT 1 FACILITY OPERATING LICENSE NO. DPR-70 DOCKET NO. 50-272 Gentlemen: |
| This Licensee Event Report entitled "Inadequate Testing of the Technical Specification Required Load Shed of Vital Busesn is being submitted pursuant to the requirements of the Code of Federal Regulations 10CFR50. 73 (a) (2) (i) (B). Attachment DVH C Distribution LER File 3.7 9701130152 970108 PDR ADOCK 05000272 S PDR The pmwr is in your hands. | | This Licensee Event Report entitled "Inadequate Testing of the Technical Specification Required Load Shed of Vital Busesn is being submitted pursuant to the requirements of the Code of Federal Regulations 10CFR50. 73 (a) (2) (i) (B). |
| David General Manager Salem Operations 95-2168 REV. 6/94
| | 0~(~1~ |
| -NRC FORM 366 u.s_ NUCLEAR REGULATORY COMMISSION APPROVED BY OMB NO. 3150-0104 (4-95'j EXPIRES 04130/98 ESTIMATED BURDEN PER RESPONSE TO COMPLY WITH THIS MANDATORY INFORMATION COLLECTION REQUEST: 50.0 HRS. LICENSEE EVENT REPORT (LER) REPORTED LESSONS LEARNED ARE INCORPORATED INTO THE LICENSING PROCESS AND FED BACK TO INDUSTRY.
| | David ~archow General Manager Salem Operations Attachment DVH C Distribution LER File 3.7 9701130152 970108 PDR ADOCK 05000272 S PDR The pmwr is in your hands. |
| FORWARD COMMENTS REGARDING BURDEN ESTIMATE TO THE INFORMATION (See reverse for required number of AND RECORDS MANAGEMENT BRANCH F33), U.S. NUCLEAR REGULATORY COMMISSION, WASHINGTON, DC AND TO digits/characters for each block) THE PAPERWORK REDUCTION PROJECT (3150-0104), OFFICE OF MANAGEMENT AND BUDGET, WASHINGTON, DC 20503. FACILITY NA*E (1) DOCKET NU*BER (2) PAGE (3) SALEM GENERATING STATION UNIT 1 05000272 1 of 4 TITLE (4) Inadequate Testing of the Technical Specification Required Load Shed of Vital Buses EVENT DATE (5) LER NUMBER (6) REPORT DATE (7) OTHER FACILITIES INVOLVED (8) I FACILITY NAME DOCKET NUMBER MONTH DAY YEAR YEAR SEQUENTIAL I REVISION MONTH DAY YEAR NUMBER NUMBER Salem Unit 2 05000311 12 10 96 96 035 00 01 97 FACILITY NAME DOCKET NUMBER --08 OPERATING N THIS REPORT IS SUBMITTED PURSUANT TO THE REQUIREMENTS OF 10 CFR §: (Check one or more) (11) MODE (9) 20.2201(b) 20.2203(a)(2)(v) x 50. 73(a)(2)(i) | | 95-2168 REV. 6/94 |
| : 50. 73(a)(2)(viii)
| | |
| POWER 000 20.2203(a)(1) 20.2203(a)(3)(i) | | NRC FORM 366 u.s_ NUCLEAR REGULATORY COMMISSION APPROVED BY OMB NO. 3150-0104 (4-95'j EXPIRES 04130/98 ESTIMATED BURDEN PER RESPONSE TO COMPLY WITH THIS MANDATORY INFORMATION COLLECTION REQUEST: 50.0 HRS. |
| : 50. 73(a)(2)(ii)
| | REPORTED LESSONS LEARNED ARE INCORPORATED INTO THE LICENSEE EVENT REPORT (LER) LICENSING PROCESS AND FED BACK TO INDUSTRY. FORWARD COMMENTS REGARDING BURDEN ESTIMATE TO THE INFORMATION AND RECORDS MANAGEMENT BRANCH (T~ F33), U.S. NUCLEAR (See reverse for required number of REGULATORY COMMISSION, WASHINGTON, DC 2055~001, AND TO THE PAPERWORK REDUCTION PROJECT (3150-0104), OFFICE OF digits/characters for each block) MANAGEMENT AND BUDGET, WASHINGTON, DC 20503. |
| : 50. 73(a)(2)(x)
| | FACILITY NA*E (1) DOCKET NU*BER (2) PAGE (3) |
| LEVEL(10) 20.2203(a)(2)(i) 20.2203(a)(3)(ii) | | SALEM GENERATING STATION UNIT 1 05000272 1 of 4 TITLE (4) |
| : 50. 73(a)(2)(iii) 73.71 -20.2203(a)(2)(ii) 20.2203(a)(4)
| | Inadequate Testing of the Technical Specification Required Load Shed of Vital Buses EVENT DATE (5) LER NUMBER (6) REPORT DATE (7) OTHER FACILITIES INVOLVED (8) |
| : 50. 73(a)(2)(iv)
| | MONTH DAY YEAR YEAR SEQUENTIAL IREVISION MONTH DAY YEAR FACILITY NAME DOCKET NUMBER I NUMBER NUMBER Salem Unit 2 FACILITY NAME 05000311 DOCKET NUMBER 12 10 96 96 - 035 - 00 01 08 97 OPERATING N THIS REPORT IS SUBMITTED PURSUANT TO THE REQUIREMENTS OF 10 CFR §: (Check one or more) (11) |
| OTHER 20.2203(a)(2)(iii) 50.36(c)(1) | | MODE (9) 20.2201(b) 20.2203(a)(2)(v) x 50. 73(a)(2)(i) 50. 73(a)(2)(viii) |
| : 50. 73(a)(2)(v)
| | POWER 000 20.2203(a)(1) 20.2203(a)(3)(i) 50. 73(a)(2)(ii) 50. 73(a)(2)(x) |
| Abstract below or in C Form 366A 20.2203(a)(2)(iv) 50.36(c)(2) | | LEVEL(10) 20.2203(a)(2)(i) 20.2203(a)(3)(ii) 50. 73(a)(2)(iii) 73.71 20.2203(a)(2)(ii) 20.2203(a)(4) 50. 73(a)(2)(iv) OTHER 20.2203(a)(2)(iii) 50.36(c)(1) 50. 73(a)(2)(v) Spec~in Abstract below or in C Form 366A 20.2203(a)(2)(iv) 50.36(c)(2) 50. 73(a)(2)(vii) |
| : 50. 73(a)(2)(vii)
| | LICENSEE CONTACT FOR THIS LER (12) |
| LICENSEE CONTACT FOR THIS LER (12) NAME TELEPHONE NUMBER (Include Aree Code) Dennis v. Hassler, LER Coordinator 609-339-1989 COMPLETE ONE LINE FOR EACH COMPONENT FAILURE DESCRIBED IN THIS REPORT (13) CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE I CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE TONPRDS TONPRDS SUPPLEMENTAL REPORT EXPECTED (14) EXPECTED MONTH DAV VEAR 'YES XINO SUBMISSION (If yes, complete EXPECTED SUBMISSION DATE). DATE(15) ABSTRACT (L1m1tto 1400 spaces, i.e., approximately 15 single-spaced typewritten lines) (16) Technical Specifications 4.8.1.1.2.d.3 and 4.8.1.1.2.d.6 require, in part, verification of Diesel Generator operability at least once per 18 months during shutdown by simulating a loss of off site power (with and without an accident signal) , and verifying the vital bus de-energizes and sheds load. This requirement was not adequately completed because a remote indicating lamp powered from the de-energized vital bus was monitored to verify load shed for a Chiller. The cause of the inadequate load shed verification is attributed to a lack of adequate controls for the development and maintenance of Technical Specifications surveillance procedures. | | NAME TELEPHONE NUMBER (Include Aree Code) |
| The load shed feature was satisfactorily tested, and the Unit 2 procedures were revised. The Unit 1 procedures will be revised prior to their next use. This event is reportable in accordance with 10 CFR 50.73(a) (2) (i) (B) , any condition prohibited by the Plant's Technical Specifications. | | Dennis v. Hassler, LER Coordinator 609-339-1989 COMPLETE ONE LINE FOR EACH COMPONENT FAILURE DESCRIBED IN THIS REPORT (13) |
| | CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE TONPRDS TONPRDS |
| | 'YES SUPPLEMENTAL REPORT EXPECTED (14) |
| | (If yes, complete EXPECTED SUBMISSION DATE). |
| | IXINO EXPECTED SUBMISSION DATE(15) |
| | MONTH DAV VEAR ABSTRACT (L1m1tto 1400 spaces, i.e., approximately 15 single-spaced typewritten lines) (16) |
| | Technical Specifications 4.8.1.1.2.d.3 and 4.8.1.1.2.d.6 require, in part, verification of Diesel Generator operability at least once per 18 months during shutdown by simulating a loss of off site power (with and without an accident signal) , and verifying the vital bus de-energizes and sheds load. This requirement was not adequately completed because a remote indicating lamp powered from the de-energized vital bus was monitored to verify load shed for a Chiller. |
| | The cause of the inadequate load shed verification is attributed to a lack of adequate controls for the development and maintenance of Technical Specifications surveillance procedures. |
| | The load shed feature was satisfactorily tested, and the Unit 2 procedures were revised. The Unit 1 procedures will be revised prior to their next use. |
| | This event is reportable in accordance with 10 CFR 50.73(a) (2) (i) (B) , any condition prohibited by the Plant's Technical Specifications. |
| NRC FORM 366 (4-95) | | NRC FORM 366 (4-95) |
| * NRC FORM 366A (4-95) u.::;.
| | |
| REGULATORY COMMISSION LICENSEE EVENT REPORT (LER) TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) SALEM GENERATING STATION UNIT 1 05000272 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) PLANT AND SYSTEM IDENTIFICATION Westinghouse
| |
| -Pressurized Water Reactor Emergency Diesel Generators
| |
| {EK} Chilled Water System {KM} YEAR I SEQUENTIAL I REVISION NUMBER NUMBER 2 96 -035 -00
| |
| * Energy Industry Identification System (EIIS) codes and component function identifier codes appear in the text as {SS/CC} CONDITIONS PRIOR TO OCCURRENCE OF At the time of identification, Salem Units 1 and 2 were shutdown and defueled.
| |
| The Technical Specification surveillance Mode applicability is 1 through 6. DESCRIPTION OF OCCURRENCE 4 Technical Specifications 4.8.1.1.2.d.3 and 4.8.1.1.2.d.6 require, in part, verification of Diesel Generator
| |
| {EK/DG} operability at least once per 18 months during shutdown by simulating a loss of offsite power (with and without an accident signal), and verifying that its associated Vital Bus {EK/BU} energizes and sheds load. This requirement was not adequately completed because a remote indicating lamp, powered from the de-energized vital bus, was monitored to verify load shed. Technical Specification (4.8.1.1.2.d.3 and 4.8.1.1.2.d.6) required testing was initiated on November 21, 1996, in preparation for entry into Mode 6 for Salem Unit 2. While reviewing the 2C Vital Bus test, a Senior Nuclear Shift Supervisor (SNSS) questioned whether verification of Chiller {KM/CHU} load shedding from the Control Room using remote indications was adequate.
| |
| The remote indicating lamp for the Chiller Breaker {KM/52} does not provide a true indication of load shed because the indicating lamp is powered from the Vital Bus. These indicating lamps are de-energized when power is removed from the bus, whether or not the chiller breaker has tripped. Therefore, the Chiller Breaker load shed feature which is required to be tested by the Technical Specifications was not being verified.
| |
| A review of the past two revisions of the associated procedures was performed to determine whether the testing had been conducted properly in the past. The review indicated that the last performance of the Unit 1 and 2 procedures had used invalid indicators as Acceptance Criteria.
| |
| A historical review of procedure revisions was conducted.
| |
| Based on the review of these historical procedures, the Technical Specifications requirements to verify vital bus load shedding may not have been completely satisfied for either Salem Unit 1 or 2 since initial plant operation.
| |
| NRC FORM 366A (4-95) | | NRC FORM 366A (4-95) |
| * NRG FORM 366A (4-95) U.S. NUCLEAR REGULATORY COMMISSION FACILITY NAME (1) LICENSEE EVENT REPORT (LER) TEXT CONTINUATION DOCKET NUMBER (2) LER NUMBER (6) SALEM GENERATING STATION UNIT 1 0 5 0 0 0 2 7 2 YEAR I SEQUENTIAL I REVISION NUMBER NUMBER 96 -035 00 PAGE (3) 3 OF 4 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) DESCRIPTION OF OCCURRENCE (Cont'd) A review of Technical Specifications history for Salem Units 1 and 2 indicates that verification of load shedding has been a requirement since initial issue of the Technical Specifications. | | LICENSEE EVENT REPORT (LER) |
| The Unit 1 Technical Specifications originally required verification of load shedding with a Loss Of Offsite Power (LOOP) concurrent with an ESF (Engineered Safety Features) actuation test signal. The requirements were expanded in Amendment 148, dated November 30, 1993, to include a test for load shedding on a LOOP in addition to the test for load shedding on a LOOP with an ESF actuation test signal. The requirements for Unit 2 have required both tests since initial issue of Technical Specifications. | | TEXT CONTINUATION u.::;. ~UCLEAR REGULATORY COMMISSION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 2 OF 4 SALEM GENERATING STATION UNIT 1 96 - 035 - 00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) |
| | PLANT AND SYSTEM IDENTIFICATION Westinghouse - Pressurized Water Reactor Emergency Diesel Generators {EK} |
| | Chilled Water System {KM} |
| | * Energy Industry Identification System (EIIS) codes and component function identifier codes appear in the text as {SS/CC} |
| | CONDITIONS PRIOR TO OCCURRENCE At the time of identification, Salem Units 1 and 2 were shutdown and defueled. |
| | The Technical Specification surveillance Mode applicability is 1 through 6. |
| | DESCRIPTION OF OCCURRENCE Technical Specifications 4.8.1.1.2.d.3 and 4.8.1.1.2.d.6 require, in part, verification of Diesel Generator {EK/DG} operability at least once per 18 months during shutdown by simulating a loss of offsite power (with and without an accident signal), and verifying that its associated Vital Bus {EK/BU} de-energizes and sheds load. This requirement was not adequately completed because a remote indicating lamp, powered from the de-energized vital bus, was monitored to verify load shed. |
| | Technical Specification (4.8.1.1.2.d.3 and 4.8.1.1.2.d.6) required testing was initiated on November 21, 1996, in preparation for entry into Mode 6 for Salem Unit 2. While reviewing the 2C Vital Bus test, a Senior Nuclear Shift Supervisor (SNSS) questioned whether verification of Chiller {KM/CHU} load shedding from the Control Room using remote indications was adequate. The remote indicating lamp for the Chiller Breaker {KM/52} does not provide a true indication of load shed because the indicating lamp is powered from the Vital Bus. These indicating lamps are de-energized when power is removed from the bus, whether or not the chiller breaker has tripped. Therefore, the Chiller Breaker load shed feature which is required to be tested by the Technical Specifications was not being verified. |
| | A review of the past two revisions of the associated procedures was performed to determine whether the testing had been conducted properly in the past. The review indicated that the last performance of the Unit 1 and 2 procedures had used invalid indicators as Acceptance Criteria. A historical review of procedure revisions was conducted. Based on the review of these historical procedures, the Technical Specifications requirements to verify vital bus load shedding may not have been completely satisfied for either Salem Unit 1 or 2 since initial plant operation. |
| | NRC FORM 366A (4-95) |
| | |
| | NRG FORM 366A (4-95) |
| | LICENSEE EVENT REPORT (LER) |
| | TEXT CONTINUATION U.S. NUCLEAR REGULATORY COMMISSION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) 05 00027 2 YEAR I SEQUENTIAL NUMBER I REVISION NUMBER 3 OF 4 SALEM GENERATING STATION UNIT 1 96 - 035 00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) |
| | DESCRIPTION OF OCCURRENCE (Cont'd) |
| | A review of Technical Specifications history for Salem Units 1 and 2 indicates that verification of load shedding has been a requirement since initial issue of the Technical Specifications. The Unit 1 Technical Specifications originally required verification of load shedding with a Loss Of Offsite Power (LOOP) concurrent with an ESF (Engineered Safety Features) actuation test signal. The requirements were expanded in Amendment 148, dated November 30, 1993, to include a test for load shedding on a LOOP in addition to the test for load shedding on a LOOP with an ESF actuation test signal. The requirements for Unit 2 have required both tests since initial issue of Technical Specifications. |
| CAUSE OF OCCURRENCE The cause of the inadequate Chiller load shed verification is attributed to a lack of adequate controls for the development and maintenance of Technical Specifications surveillance procedures. | | CAUSE OF OCCURRENCE The cause of the inadequate Chiller load shed verification is attributed to a lack of adequate controls for the development and maintenance of Technical Specifications surveillance procedures. |
| PRIOR SIMILAR OCCURRENCES The cause of this event was initially described in LER 311/95-008. | | PRIOR SIMILAR OCCURRENCES The cause of this event was initially described in LER 311/95-008. A review of LERs for Salem Units 1 & 2 identified eleven LERs related to missed surveillances due to procedural deficiencies issued within the past two years (LER 272/96-026, LER 272/96-024, LER 272/96-016, LER 272/96-006, LER 272/96-005, LER 272/96-004, LER 272/94-008, LER 311/96-013, LER 311/96-011, LER 311/96-007, and LER 311/95-008) |
| A review of LERs for Salem Units 1 & 2 identified eleven LERs related to missed surveillances due to procedural deficiencies issued within the past two years (LER 272/96-026, LER 272/96-024, LER 272/96-016, LER 272/96-006, LER 272/96-005, LER 272/96-004, LER 272/94-008, LER 311/96-013, LER 311/96-011, LER 311/96-007, and LER 311/95-008) | | Corrective actions from the above LERs were implemented to address the specific deficiencies identified in each respective LER. The Technical Specifications Surveillance Improvement Project (TSSIP) has been implemented to address the long standing programmatic deficiencies associated with the implementation and maintenance of Technical Specifications surveillance procedures. A full description of the TSSIP is included in LER 311/95-008. |
| Corrective actions from the above LERs were implemented to address the specific deficiencies identified in each respective LER. The Technical Specifications Surveillance Improvement Project (TSSIP) has been implemented to address the long standing programmatic deficiencies associated with the implementation and maintenance of Technical Specifications surveillance procedures. | |
| A full description of the TSSIP is included in LER 311/95-008. | |
| NRC FORM 366A (4-95) | | NRC FORM 366A (4-95) |
| * NRe FORM 366A U.S. N:JCLEAR REGULATORY COMMISSION
| | |
| * (4-95) LICENSEE EVENT REPORT (LER) TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) SALEM GENERATING STATION UNIT 1 0 5 0 0 0 2 7 2 YEAR I SEQUENTIAL I REVISION NUMBER NUMBER 96 -035 -00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) SAFETY CONSEQUENCES AND IMPLICATIONS PAGE (3) 4 OF 4 There were no safety consequences as a result of this occurrence.
| | NRe FORM 366A (4-95) |
| Follow up testing of Chiller load shedding on Vital Buses 2A, 2B and 2C demonstrated satisfactory circuit operation. | | LICENSEE EVENT REPORT (LER) |
| In addition, the testing demonstrated that loads sequenced onto the bus, and confirmed the ability of the Diesel Generators to carry the load required by Technical Specifications. | | TEXT CONTINUATION U.S. N:JCLEAR REGULATORY COMMISSION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) 05 0 0 02 72 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 4 OF 4 SALEM GENERATING STATION UNIT 1 96 - 035 - 00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) |
| | SAFETY CONSEQUENCES AND IMPLICATIONS There were no safety consequences as a result of this occurrence. Follow up testing of Chiller load shedding on Vital Buses 2A, 2B and 2C demonstrated satisfactory circuit operation. In addition, the testing demonstrated that loads sequenced onto the bus, and confirmed the ability of the Diesel Generators to carry the load required by Technical Specifications. |
| The health and safety of the public was not affected. | | The health and safety of the public was not affected. |
| CORRECTIVE ACTIONS 1. Subsequent testing verified proper load shedding of the Chiller Breakers. | | CORRECTIVE ACTIONS |
| : 2. The Unit 2 test procedures were reviewed for additional problems related to improper use of indicators to verify load shedding. | | : 1. Subsequent testing verified proper load shedding of the Chiller Breakers. |
| No additional problems were identified with the Unit 2 procedures. | | : 2. The Unit 2 test procedures were reviewed for additional problems related to improper use of indicators to verify load shedding. No additional problems were identified with the Unit 2 procedures. |
| : 3. The Unit 1 test procedures will be reviewed for problems related to the improper use of indicators to verify load shedding prior to entry into Mode 6. 4. The associated Unit 2 procedures were revised on December 7, 1996 to incorporate local verification of Chiller load shedding. | | : 3. The Unit 1 test procedures will be reviewed for problems related to the improper use of indicators to verify load shedding prior to entry into Mode 6. |
| : 5. The associated Unit 1 procedures will be revised prior to entry into Mode 6. 6. A Technical Specification Surveillance Improvement Project (TSSIP) was initiated as a corrective action of LER 311/95-008. | | : 4. The associated Unit 2 procedures were revised on December 7, 1996 to incorporate local verification of Chiller load shedding. |
| The TSSIP is also applicable as a corrective action to this occurrence. (Refer to LER 311/95-008 for a full description of the TSSIP.) NRC FORM 366A (4-95)}} | | : 5. The associated Unit 1 procedures will be revised prior to entry into Mode 6. |
| | : 6. A Technical Specification Surveillance Improvement Project (TSSIP) was initiated as a corrective action of LER 311/95-008. The TSSIP is also applicable as a corrective action to this occurrence. (Refer to LER 311/95-008 for a full description of the TSSIP.) |
| | NRC FORM 366A (4-95)}} |
Similar Documents at Salem |
|---|
Category:LICENSEE EVENT REPORT (SEE ALSO AO
MONTHYEARML18107A5031999-08-26026 August 1999
LER 99-006-00:on 990729,determined That SG Blowdown RMs Setpoint Was non-conservative.Caused by Inadequate ACs for Incorporating Original Plant Licensing Data Into Plant Procedures.Blowdown Will Be Restricted.With 990826 Ltr
ML18107A4691999-07-28028 July 1999
LER 99-008-00:on 990714,determined That Limit Switch Cables Were Subject to Multiple Hot Shorts in Same Fire Area.Caused by Inadequate Original Post Fire Safe Shutdown Analysis.All Limit Switch Cables for MOVs Were Reviewed.With 990728 Ltr
ML18107A4441999-07-0606 July 1999
LER 99-007-00:on 990605,surveillance for Quadrant Power Tilt Ratio (QPTR) Was Missed.Caused by Human Error.Qptr Calculation Was Performed & Personnel Involved Have Been Held Accountable IAW Pse&G Policies.With 990706 Ltr
ML18107A4211999-07-0202 July 1999
LER 99-005-00:on 990605,11 Containment Declared Inoperable. Caused by Valves 11SW72 & 11SW223 Both Leaking.Procedure S1.OP-ST.SW-0010(Q) Was Enhanced to Provide Specific Instructions to Ensure Proper Sequencing.With 990702 Ltr
ML18107A4321999-07-0101 July 1999
LER 99-006-01:on 990501,determined That There Was No Flow in One of Four Injection Legs.Caused by Sticking of Valve in Safety Injection Discharge Line to 21 Cold Leg.Valve Was Cut Out of Sys & Replaced.With 990701 Ltr
ML18107A4331999-07-0101 July 1999
LER 99-002-01:on 990405,determined That 2SA118 Failed as Found Leakrate Test.Caused by Foreign Matl Found in 2SA118 valve.2SA118 Valve Was Cycled Several Times & Seat Area Was Air Blown in Order to Displace Foreign Matl.With 990701 Ltr
ML18107A3951999-06-17017 June 1999
LER 99-004-00:on 990520,reactor Tripped from 100% Power,Due to Negative Flux Trip Signal from Nuclear Instrumentation. Cause Has Not Been Determined.Discoloration Was Identified on One of Penetrations.With 990617 Ltr
ML18107A3661999-06-0909 June 1999
LER 99-003-00:on 990513,unplanned Entry Into TS 3.0.3 Was Made.Caused by Human error.Re-positioned Creacs Supply Fan Selector Switches & Revised Procedures S1 & S2.OP-ST.SSP-0001(Q).With 990609 Ltr
ML18107A3551999-06-0202 June 1999
LER 99-005-00:on 990504,failure to Meet TS Action Statement Requirements for High Oxygen Concentration in Waste Gas Holdup Sys Occurred.Caused by Inability of Operators. Existing Procedures Will Be Evaluated.With 990602 Ltr
ML18107A3541999-06-0101 June 1999
LER 99-006-00:on 990501,HHSI Flow Balance Discrepancy Was Noted During Surveillance.Caused by Sticking of Check Valve in SI Discharge Line to 21 Cold Leg.Valve 21SJ17,was Cut Out of Sys & Replaced.With 990601 Ltr
ML18107A2931999-05-12012 May 1999
LER 99-002-00:on 990413,determined That Number 12 Auxiliary Bldg Exhaust Fan Was Rotating Backwards.Caused by mis-wiring of Motor Due to Human Error by Maint technician.Mis-wiring Was Corrected & Fan Was Returned to Svc.With 990512 Ltr
ML18107A2781999-05-10010 May 1999
LER 99-004-00:on 990411,automatic Actuation of ESF Occurred During Reactor Vessel Head Removal in Support of Refueling Operations.Caused by High Radiation Condition.Containment Atmosphere Was Monitored.With 990505 Ltr
ML18107A2791999-05-0404 May 1999
LER 99-003-00:on 990406,all Salem Unit 2 Chillers Rendered Inoperable.Caused by Human Error.Lessons Learned from Event Were Communicated to All Operators by Including Them in Night Orders.With 990504 Ltr
ML18107A2741999-05-0303 May 1999
LER 99-002-00:on 990405,determined That Containment Isolation Valve Failed as Found Leakrate Test.Caused by Foreign Matl Blocking Valves from Closing.Check Valve Mechanically Agitated.With 990504 Ltr
ML18107A2351999-04-23023 April 1999
LER 99-001-00:on 990330,MSSV Failed Lift Set Test.Caused by Setpoint Variance Which Is Result of Aging.Valves Were Adjusted & Retested to Ensure TS Tolerance.With 990423 Ltr
ML18106B1471999-03-29029 March 1999
LER 99-001-00:on 990228,reactor Scram Was Noted as Result of Turbine Trip.Caused by Operator Error.Lesson Plans Revised to Explicitly Demonstrate Manner in Which Valve Functions. with 990329 Ltr
ML18106B0701999-02-16016 February 1999
LER 98-015-00:on 981208,inadvertent Discharge Through RHR Relief Valve During Startup Was Noted.Caused by Operator Performing Too Many Tasks Simultaneously.Appropriate Actions Have Been Taken IAW Policies & Procedures.With 990216 Ltr
ML18106B0491999-01-28028 January 1999
LER 98-007-01:on 980730,reactor Coolant Instrument Line through-wall Leak Was Noted.Caused by Transgranular Stress Corrosion Cracking.Replaced Affected Tubing.With 990128 Ltr
ML18106B0401999-01-18018 January 1999
LER 98-016-00:on 981219,ECCS Leakage Was Outside of Design Value.Caused by Leakage Past Seat of 21RH34 Manual Drain. Valve 21RH34 Was Reseated.With 990118 Ltr
ML18106B0081998-12-24024 December 1998
LER 97-001-01:on 970215,failure to Perform TS Surveillance of Component Cooling Water Sys Check Valves Occurred.Caused by Inadequate Communication Between EOP Group & IST Reviewers.Procedure Revised.With 981224 Ltr
ML18106B0021998-12-17017 December 1998
LER 98-015-01:on 980924,improper Installation of Test Equipment to RPS Occurred.Caused by Inadequate 10CFR50.59 Applicability Reviews During Past Revs.Revised Procedures. with 981217 Ltr
ML18106A9551998-11-0303 November 1998
LER 96-013-01:on 960711,concluded That Current Gain & Bias Settings Had Rendered Overtemperature Delta Temp Protection Channels Inoperable.Caused by Scaling Error.Licensee Will Revise Scaling Calculations.With 981105 Ltr
ML18106A9451998-10-30030 October 1998
LER 97-004-01:on 970408,failure to Comply with TS Action Statement,Dg Start & Inadequate Surveillance Testing,Was Noted.Caused by Inadequate Tracking of Inoperable Equipment. Discussed Event & Lessons Learned.With 981022 Ltr
ML18106A9491998-10-22022 October 1998
LER 98-015-00:on 980924,identified Improper Installation of Test Equipment to Rps.Cause Indeterminate.Procedures for Installation of Test Equipment for Collection of State Point Data Were Placed on Administrative Hold.With 981022 Ltr
ML18106A9301998-10-21021 October 1998
LER 98-014-00:on 980725,noted Improper Calibr of Liquid Radwaste Effluent Line Radiation Monitor.Caused by Inattention to Detail by Maint Personnel.Channel Calibr Was Successfully Performed on 1R18 on 980821.With 981019 Ltr
ML18106A9071998-10-0101 October 1998
LER 98-014-00:on 980918,discovered That Fire Barrier Matl for HVAC Ducts Does Not Meet Required Level of Fire Resistance.Cause Indeterminate.Established Appropriate Compensatory Actions for Fire Barriers.With 981001 Ltr
ML18106A8951998-09-28028 September 1998
LER 98-012-01:on 980725,noted That Afs Was Operated with Less than Required Number of Operable AFW Pumps.Caused by Improper Procedure Implementation.Runout Protection Pressure Device for 22 AFW Pumps Was Returned to Svc.With 980928 Ltr
ML18106A8821998-09-21021 September 1998
LER 98-013-00:on 980820,noted Surveillance of Containment Penetration Overcurrent Protection Devices Missed.Caused by Human Error.Satisfactorily Tested Apprpriate Breakers & Disciplined Involved Personnel.With 980921 Ltr
ML18106A8791998-09-16016 September 1998
LER 96-006-01:on 960717,determined That non-radioactive Liquid Basin Radwaste Monitor Inoperable During Low Head Conditions.Caused by Inadequate Design Change Package.Design Change 1EC3663-01 Has Been Installed.With 980916 Ltr
ML18106A8801998-09-0808 September 1998
LER 98-013-00:on 980806,operation with TS Required Equipment OOS Was Noted.Caused by Human Error.Reviewed Processes & Practices Re Safety Sys Status Control,Procedure Rev & Extra Training.With 980908 Ltr
ML18106A8531998-08-27027 August 1998
LER 98-007-00:on 980730,reactor Coolant Instrument Line through-wall Leak Was Noted.Cause of Event Has Not Yet Been Determined.Assembled Root Cause Team & Replaced Affected tubing.W/980827 Ltr
ML18106A8521998-08-27027 August 1998
LER 98-011-00:on 980803,ESFA During a 4KV Automatic Transfer Test Was Noted.Caused by Premature Release of Control Console Pushbutton Due to Inadequate Procedural Step.Revised procedure.W/980827 Ltr
ML18106A8421998-08-24024 August 1998
LER 98-012-00:on 980725,discovered That Plant Had Operated in Modes 1 & 2 w/twenty-two AFW Pumps Inoperable.Caused by Failure to Restore Pump Runout Protection Pressure Device to Svc.Returned Subject Device to svc.W/980824 Ltr
ML18106A8431998-08-24024 August 1998
LER 98-009-00:on 980810,failure to Post Continuous Firewatch as Required by Fire Protection Plan Noted.Caused by Failure to Recognize Concurrent Conditions.Continuous Firewatch Was Posted Immediately & Repaired Smoke detectors.W/980824 Ltr
ML18106A8141998-08-13013 August 1998
LER 98-010-00:on 980714,determined That Leakage from Boron Injection Tank Exceeded Max Allowable ECCS Leakage from Sources Outside Containment.Caused by Leaking 2SJ404 Manual Sample valve.2SJ404 Valve repaired.W/980813 Ltr
ML18106A8201998-08-13013 August 1998
LER 98-012-00:on 980715,potential to Exceed Rating of Piping Due to Isolation of Overpressure Protection Line Was Noted. Caused by Inadequate Procedural Guidance.Appropriate Operations Dept Procedures Have Been revised.W/980813 Ltr
ML18106A6931998-06-29029 June 1998
LER 98-003-00:on 980122,inappropriate Plugging of Tubes R9C60 & R10C60 in Salem Unit 2 Sg,Was Performed.Caused by Failure of Qualification,Verification & Validation Process. Tubes Reviewed to Verify No Others Inappropriately Plugged
ML18106A6471998-06-0404 June 1998
LER 98-011-00:on 980505,improper Isolation of Single Cell Battery Charger from 125 Vdc Battery Was Noted.Caused by Inadequate 10CFR50.59 Applicability Review.Placed Procedure SC.MD-CM.ZZ-0024(Q) on Administrative hold.W/980604 Ltr
ML18106A6421998-06-0101 June 1998
LER 98-010-00:on 931019,reactor Pressure Vessel Insp Plugs Were Out of Configuration,Was Noted.Caused by Personnel Error.Proper Configuration Was Restored Shortly After Discovery Prior to Entering Mode 2.W/980601 Ltr
ML18106A6431998-05-29029 May 1998
LER 98-006-01:on 980227,determined Incorrect Scaling Error of First Stage Pressure Transmitter Existed.Caused by Human Error.Revised Setpoint Calculation SC-MS002-01 & Revised Associated Instrument Calibr Database info.W/980529 Ltr
ML18106A6141998-05-18018 May 1998
LER 98-008-00:on 970814,failure to Test 21 & 22 AF 40 Valves in Closed Direction as Required by TS 4.0.5 Was Noted.Caused by Inadequate Design Mod Process.Motor Driven 21/22 AF 40 Valves Were Tested IAW Revised procedure.W/980518 Ltr
ML18106A5901998-05-0101 May 1998
LER 98-009-00:on 980405,epoxy Missing from Terminals of H Analyzer Was Noted.Caused by Inadequate Development of Procedure.H Analyzers Were Repaired & Review of Other Safety Related Equipment in Containment Was performed.W/980501 Ltr
ML18106A5611998-04-20020 April 1998
LER 98-008-00:on 980323,inadequate Testing of Salem Unit 1 Containment Air Locks Resulted in Entering TS 3.0.3.Caused by less-than-adequate Work Practices During Replacement of Equalizing Valve.Salem Unit 2 Airlocks Were Inspected
ML18106A6061998-04-0101 April 1998
Corrected LER 98-004-00:on 980302,failure to Comply W/Tss 4.11.1.1.2 & 3.3.3.8 Was Noted.Caused by Organizational Deficiency.Steps Have Been Taken to Correctly Document Safety Factors.Corrects Prior Similar Occurrences
ML18106A4451998-04-0101 April 1998
LER 98-004-00:on 980302,failure to Perform TS 4.11.1.1.2 & 3.3.3.8 Was Noted.Caused by Organizational Deficiency.Steps Were Taken to Correctly Document Safety factors.W/980401 Ltr
ML18106A4351998-03-30030 March 1998
LER 98-006-00:on 980227,incorrect Scaling of First Stage Turbine Impulse Pressure Transmitters Noted.Cause Indeterminate.Implemented Procedure Changes & re-scaled Affected Turbine Impulse Pressure transmitters.W/980330 Ltr
ML18106A3961998-03-20020 March 1998
LER 98-005-00:on 980219,inoperability of Twelve EDG Fuel Oil Transfer Pump (FOTP) Noted.Caused by Installation of Incorrect Control Switch.Installed Correct off-auto-manual Switch & Verified Operability of Twelve FOTP.W/980320 Ltr
ML18106A5781998-03-20020 March 1998
Corrected LER 98-005-00:on 980219,inoperability of 12 Fuel Oil Transfer Pump (Fotp),Noted.Caused by Installation of Incorrect Control Switch.Field Insp Performed to Verify Configuration of Switches for 11,21 & 22 FOTPs
ML18106A4021998-03-20020 March 1998
LER 98-007-00:on 980218,failure to Establish Containment Integrity (Closure) Prior to Fuel Movement Was Noted.Caused by Failure to Identify & Include Condensate Pot Vent in Appropriate Valve Lineup.Valves identified.W/980320 Ltr
ML18106A4031998-03-20020 March 1998
LER 98-006-00:on 980221,ESF Actuation of 11 & 12 Auxiliary Feedwater Pumps Occurred.Caused by Human Error.Operators Promptly Established Feedwater to All SG & Restored Proper Water levels.W/980320 Ltr
1999-08-26
[Table view]
Category:RO)
MONTHYEARML18107A5031999-08-26026 August 1999
LER 99-006-00:on 990729,determined That SG Blowdown RMs Setpoint Was non-conservative.Caused by Inadequate ACs for Incorporating Original Plant Licensing Data Into Plant Procedures.Blowdown Will Be Restricted.With 990826 Ltr
ML18107A4691999-07-28028 July 1999
LER 99-008-00:on 990714,determined That Limit Switch Cables Were Subject to Multiple Hot Shorts in Same Fire Area.Caused by Inadequate Original Post Fire Safe Shutdown Analysis.All Limit Switch Cables for MOVs Were Reviewed.With 990728 Ltr
ML18107A4441999-07-0606 July 1999
LER 99-007-00:on 990605,surveillance for Quadrant Power Tilt Ratio (QPTR) Was Missed.Caused by Human Error.Qptr Calculation Was Performed & Personnel Involved Have Been Held Accountable IAW Pse&G Policies.With 990706 Ltr
ML18107A4211999-07-0202 July 1999
LER 99-005-00:on 990605,11 Containment Declared Inoperable. Caused by Valves 11SW72 & 11SW223 Both Leaking.Procedure S1.OP-ST.SW-0010(Q) Was Enhanced to Provide Specific Instructions to Ensure Proper Sequencing.With 990702 Ltr
ML18107A4321999-07-0101 July 1999
LER 99-006-01:on 990501,determined That There Was No Flow in One of Four Injection Legs.Caused by Sticking of Valve in Safety Injection Discharge Line to 21 Cold Leg.Valve Was Cut Out of Sys & Replaced.With 990701 Ltr
ML18107A4331999-07-0101 July 1999
LER 99-002-01:on 990405,determined That 2SA118 Failed as Found Leakrate Test.Caused by Foreign Matl Found in 2SA118 valve.2SA118 Valve Was Cycled Several Times & Seat Area Was Air Blown in Order to Displace Foreign Matl.With 990701 Ltr
ML18107A3951999-06-17017 June 1999
LER 99-004-00:on 990520,reactor Tripped from 100% Power,Due to Negative Flux Trip Signal from Nuclear Instrumentation. Cause Has Not Been Determined.Discoloration Was Identified on One of Penetrations.With 990617 Ltr
ML18107A3661999-06-0909 June 1999
LER 99-003-00:on 990513,unplanned Entry Into TS 3.0.3 Was Made.Caused by Human error.Re-positioned Creacs Supply Fan Selector Switches & Revised Procedures S1 & S2.OP-ST.SSP-0001(Q).With 990609 Ltr
ML18107A3551999-06-0202 June 1999
LER 99-005-00:on 990504,failure to Meet TS Action Statement Requirements for High Oxygen Concentration in Waste Gas Holdup Sys Occurred.Caused by Inability of Operators. Existing Procedures Will Be Evaluated.With 990602 Ltr
ML18107A3541999-06-0101 June 1999
LER 99-006-00:on 990501,HHSI Flow Balance Discrepancy Was Noted During Surveillance.Caused by Sticking of Check Valve in SI Discharge Line to 21 Cold Leg.Valve 21SJ17,was Cut Out of Sys & Replaced.With 990601 Ltr
ML18107A2931999-05-12012 May 1999
LER 99-002-00:on 990413,determined That Number 12 Auxiliary Bldg Exhaust Fan Was Rotating Backwards.Caused by mis-wiring of Motor Due to Human Error by Maint technician.Mis-wiring Was Corrected & Fan Was Returned to Svc.With 990512 Ltr
ML18107A2781999-05-10010 May 1999
LER 99-004-00:on 990411,automatic Actuation of ESF Occurred During Reactor Vessel Head Removal in Support of Refueling Operations.Caused by High Radiation Condition.Containment Atmosphere Was Monitored.With 990505 Ltr
ML18107A2791999-05-0404 May 1999
LER 99-003-00:on 990406,all Salem Unit 2 Chillers Rendered Inoperable.Caused by Human Error.Lessons Learned from Event Were Communicated to All Operators by Including Them in Night Orders.With 990504 Ltr
ML18107A2741999-05-0303 May 1999
LER 99-002-00:on 990405,determined That Containment Isolation Valve Failed as Found Leakrate Test.Caused by Foreign Matl Blocking Valves from Closing.Check Valve Mechanically Agitated.With 990504 Ltr
ML18107A2351999-04-23023 April 1999
LER 99-001-00:on 990330,MSSV Failed Lift Set Test.Caused by Setpoint Variance Which Is Result of Aging.Valves Were Adjusted & Retested to Ensure TS Tolerance.With 990423 Ltr
ML18106B1471999-03-29029 March 1999
LER 99-001-00:on 990228,reactor Scram Was Noted as Result of Turbine Trip.Caused by Operator Error.Lesson Plans Revised to Explicitly Demonstrate Manner in Which Valve Functions. with 990329 Ltr
ML18106B0701999-02-16016 February 1999
LER 98-015-00:on 981208,inadvertent Discharge Through RHR Relief Valve During Startup Was Noted.Caused by Operator Performing Too Many Tasks Simultaneously.Appropriate Actions Have Been Taken IAW Policies & Procedures.With 990216 Ltr
ML18106B0491999-01-28028 January 1999
LER 98-007-01:on 980730,reactor Coolant Instrument Line through-wall Leak Was Noted.Caused by Transgranular Stress Corrosion Cracking.Replaced Affected Tubing.With 990128 Ltr
ML18106B0401999-01-18018 January 1999
LER 98-016-00:on 981219,ECCS Leakage Was Outside of Design Value.Caused by Leakage Past Seat of 21RH34 Manual Drain. Valve 21RH34 Was Reseated.With 990118 Ltr
ML18106B0081998-12-24024 December 1998
LER 97-001-01:on 970215,failure to Perform TS Surveillance of Component Cooling Water Sys Check Valves Occurred.Caused by Inadequate Communication Between EOP Group & IST Reviewers.Procedure Revised.With 981224 Ltr
ML18106B0021998-12-17017 December 1998
LER 98-015-01:on 980924,improper Installation of Test Equipment to RPS Occurred.Caused by Inadequate 10CFR50.59 Applicability Reviews During Past Revs.Revised Procedures. with 981217 Ltr
ML18106A9551998-11-0303 November 1998
LER 96-013-01:on 960711,concluded That Current Gain & Bias Settings Had Rendered Overtemperature Delta Temp Protection Channels Inoperable.Caused by Scaling Error.Licensee Will Revise Scaling Calculations.With 981105 Ltr
ML18106A9451998-10-30030 October 1998
LER 97-004-01:on 970408,failure to Comply with TS Action Statement,Dg Start & Inadequate Surveillance Testing,Was Noted.Caused by Inadequate Tracking of Inoperable Equipment. Discussed Event & Lessons Learned.With 981022 Ltr
ML18106A9491998-10-22022 October 1998
LER 98-015-00:on 980924,identified Improper Installation of Test Equipment to Rps.Cause Indeterminate.Procedures for Installation of Test Equipment for Collection of State Point Data Were Placed on Administrative Hold.With 981022 Ltr
ML18106A9301998-10-21021 October 1998
LER 98-014-00:on 980725,noted Improper Calibr of Liquid Radwaste Effluent Line Radiation Monitor.Caused by Inattention to Detail by Maint Personnel.Channel Calibr Was Successfully Performed on 1R18 on 980821.With 981019 Ltr
ML18106A9071998-10-0101 October 1998
LER 98-014-00:on 980918,discovered That Fire Barrier Matl for HVAC Ducts Does Not Meet Required Level of Fire Resistance.Cause Indeterminate.Established Appropriate Compensatory Actions for Fire Barriers.With 981001 Ltr
ML18106A8951998-09-28028 September 1998
LER 98-012-01:on 980725,noted That Afs Was Operated with Less than Required Number of Operable AFW Pumps.Caused by Improper Procedure Implementation.Runout Protection Pressure Device for 22 AFW Pumps Was Returned to Svc.With 980928 Ltr
ML18106A8821998-09-21021 September 1998
LER 98-013-00:on 980820,noted Surveillance of Containment Penetration Overcurrent Protection Devices Missed.Caused by Human Error.Satisfactorily Tested Apprpriate Breakers & Disciplined Involved Personnel.With 980921 Ltr
ML18106A8791998-09-16016 September 1998
LER 96-006-01:on 960717,determined That non-radioactive Liquid Basin Radwaste Monitor Inoperable During Low Head Conditions.Caused by Inadequate Design Change Package.Design Change 1EC3663-01 Has Been Installed.With 980916 Ltr
ML18106A8801998-09-0808 September 1998
LER 98-013-00:on 980806,operation with TS Required Equipment OOS Was Noted.Caused by Human Error.Reviewed Processes & Practices Re Safety Sys Status Control,Procedure Rev & Extra Training.With 980908 Ltr
ML18106A8531998-08-27027 August 1998
LER 98-007-00:on 980730,reactor Coolant Instrument Line through-wall Leak Was Noted.Cause of Event Has Not Yet Been Determined.Assembled Root Cause Team & Replaced Affected tubing.W/980827 Ltr
ML18106A8521998-08-27027 August 1998
LER 98-011-00:on 980803,ESFA During a 4KV Automatic Transfer Test Was Noted.Caused by Premature Release of Control Console Pushbutton Due to Inadequate Procedural Step.Revised procedure.W/980827 Ltr
ML18106A8421998-08-24024 August 1998
LER 98-012-00:on 980725,discovered That Plant Had Operated in Modes 1 & 2 w/twenty-two AFW Pumps Inoperable.Caused by Failure to Restore Pump Runout Protection Pressure Device to Svc.Returned Subject Device to svc.W/980824 Ltr
ML18106A8431998-08-24024 August 1998
LER 98-009-00:on 980810,failure to Post Continuous Firewatch as Required by Fire Protection Plan Noted.Caused by Failure to Recognize Concurrent Conditions.Continuous Firewatch Was Posted Immediately & Repaired Smoke detectors.W/980824 Ltr
ML18106A8141998-08-13013 August 1998
LER 98-010-00:on 980714,determined That Leakage from Boron Injection Tank Exceeded Max Allowable ECCS Leakage from Sources Outside Containment.Caused by Leaking 2SJ404 Manual Sample valve.2SJ404 Valve repaired.W/980813 Ltr
ML18106A8201998-08-13013 August 1998
LER 98-012-00:on 980715,potential to Exceed Rating of Piping Due to Isolation of Overpressure Protection Line Was Noted. Caused by Inadequate Procedural Guidance.Appropriate Operations Dept Procedures Have Been revised.W/980813 Ltr
ML18106A6931998-06-29029 June 1998
LER 98-003-00:on 980122,inappropriate Plugging of Tubes R9C60 & R10C60 in Salem Unit 2 Sg,Was Performed.Caused by Failure of Qualification,Verification & Validation Process. Tubes Reviewed to Verify No Others Inappropriately Plugged
ML18106A6471998-06-0404 June 1998
LER 98-011-00:on 980505,improper Isolation of Single Cell Battery Charger from 125 Vdc Battery Was Noted.Caused by Inadequate 10CFR50.59 Applicability Review.Placed Procedure SC.MD-CM.ZZ-0024(Q) on Administrative hold.W/980604 Ltr
ML18106A6421998-06-0101 June 1998
LER 98-010-00:on 931019,reactor Pressure Vessel Insp Plugs Were Out of Configuration,Was Noted.Caused by Personnel Error.Proper Configuration Was Restored Shortly After Discovery Prior to Entering Mode 2.W/980601 Ltr
ML18106A6431998-05-29029 May 1998
LER 98-006-01:on 980227,determined Incorrect Scaling Error of First Stage Pressure Transmitter Existed.Caused by Human Error.Revised Setpoint Calculation SC-MS002-01 & Revised Associated Instrument Calibr Database info.W/980529 Ltr
ML18106A6141998-05-18018 May 1998
LER 98-008-00:on 970814,failure to Test 21 & 22 AF 40 Valves in Closed Direction as Required by TS 4.0.5 Was Noted.Caused by Inadequate Design Mod Process.Motor Driven 21/22 AF 40 Valves Were Tested IAW Revised procedure.W/980518 Ltr
ML18106A5901998-05-0101 May 1998
LER 98-009-00:on 980405,epoxy Missing from Terminals of H Analyzer Was Noted.Caused by Inadequate Development of Procedure.H Analyzers Were Repaired & Review of Other Safety Related Equipment in Containment Was performed.W/980501 Ltr
ML18106A5611998-04-20020 April 1998
LER 98-008-00:on 980323,inadequate Testing of Salem Unit 1 Containment Air Locks Resulted in Entering TS 3.0.3.Caused by less-than-adequate Work Practices During Replacement of Equalizing Valve.Salem Unit 2 Airlocks Were Inspected
ML18106A6061998-04-0101 April 1998
Corrected LER 98-004-00:on 980302,failure to Comply W/Tss 4.11.1.1.2 & 3.3.3.8 Was Noted.Caused by Organizational Deficiency.Steps Have Been Taken to Correctly Document Safety Factors.Corrects Prior Similar Occurrences
ML18106A4451998-04-0101 April 1998
LER 98-004-00:on 980302,failure to Perform TS 4.11.1.1.2 & 3.3.3.8 Was Noted.Caused by Organizational Deficiency.Steps Were Taken to Correctly Document Safety factors.W/980401 Ltr
ML18106A4351998-03-30030 March 1998
LER 98-006-00:on 980227,incorrect Scaling of First Stage Turbine Impulse Pressure Transmitters Noted.Cause Indeterminate.Implemented Procedure Changes & re-scaled Affected Turbine Impulse Pressure transmitters.W/980330 Ltr
ML18106A3961998-03-20020 March 1998
LER 98-005-00:on 980219,inoperability of Twelve EDG Fuel Oil Transfer Pump (FOTP) Noted.Caused by Installation of Incorrect Control Switch.Installed Correct off-auto-manual Switch & Verified Operability of Twelve FOTP.W/980320 Ltr
ML18106A5781998-03-20020 March 1998
Corrected LER 98-005-00:on 980219,inoperability of 12 Fuel Oil Transfer Pump (Fotp),Noted.Caused by Installation of Incorrect Control Switch.Field Insp Performed to Verify Configuration of Switches for 11,21 & 22 FOTPs
ML18106A4021998-03-20020 March 1998
LER 98-007-00:on 980218,failure to Establish Containment Integrity (Closure) Prior to Fuel Movement Was Noted.Caused by Failure to Identify & Include Condensate Pot Vent in Appropriate Valve Lineup.Valves identified.W/980320 Ltr
ML18106A4031998-03-20020 March 1998
LER 98-006-00:on 980221,ESF Actuation of 11 & 12 Auxiliary Feedwater Pumps Occurred.Caused by Human Error.Operators Promptly Established Feedwater to All SG & Restored Proper Water levels.W/980320 Ltr
1999-08-26
[Table view]
Category:TEXT-SAFETY REPORT
MONTHYEARML20217A9931999-09-30030 September 1999
NRC Regulatory Assessment & Oversight Pilot Program, Performance Indicator Data
ML18107A5581999-09-30030 September 1999
Monthly Operating Rept for Sept 1999 for Salem,Unit 2.With 991014 Ltr
ML18107A5571999-09-30030 September 1999
Monthly Operating Rept for Sept 1999 for Salem,Unit 1.With 991014 Ltr
ML18107A5301999-08-31031 August 1999
Monthly Operating Rept for Aug 1999 for Salem,Unit 2.With 990913 Ltr
ML18107A5311999-08-31031 August 1999
Monthly Operating Rept for Aug 1999 for Salem,Unit 1.With 990913
ML18107A5031999-08-26026 August 1999
LER 99-006-00:on 990729,determined That SG Blowdown RMs Setpoint Was non-conservative.Caused by Inadequate ACs for Incorporating Original Plant Licensing Data Into Plant Procedures.Blowdown Will Be Restricted.With 990826 Ltr
ML18107A5201999-08-12012 August 1999
Rev 0 to Sgs Unit 2 ISI RFO Exam Results (S2RFO#9) Second Interval,Second Period, First Outage (96RF).
ML18107A4811999-07-31031 July 1999
Monthly Operating Rept for July 1999 for Salem,Unit 1.With 990813 Ltr
ML18107A4821999-07-31031 July 1999
Monthly Operating Rept for July 1999 for Salem,Unit 2.With 990813 Ltr
ML18107A4691999-07-28028 July 1999
LER 99-008-00:on 990714,determined That Limit Switch Cables Were Subject to Multiple Hot Shorts in Same Fire Area.Caused by Inadequate Original Post Fire Safe Shutdown Analysis.All Limit Switch Cables for MOVs Were Reviewed.With 990728 Ltr
ML18107A4441999-07-0606 July 1999
LER 99-007-00:on 990605,surveillance for Quadrant Power Tilt Ratio (QPTR) Was Missed.Caused by Human Error.Qptr Calculation Was Performed & Personnel Involved Have Been Held Accountable IAW Pse&G Policies.With 990706 Ltr
ML18107A4211999-07-0202 July 1999
LER 99-005-00:on 990605,11 Containment Declared Inoperable. Caused by Valves 11SW72 & 11SW223 Both Leaking.Procedure S1.OP-ST.SW-0010(Q) Was Enhanced to Provide Specific Instructions to Ensure Proper Sequencing.With 990702 Ltr
ML18107A4331999-07-0101 July 1999
LER 99-002-01:on 990405,determined That 2SA118 Failed as Found Leakrate Test.Caused by Foreign Matl Found in 2SA118 valve.2SA118 Valve Was Cycled Several Times & Seat Area Was Air Blown in Order to Displace Foreign Matl.With 990701 Ltr
ML18107A4321999-07-0101 July 1999
LER 99-006-01:on 990501,determined That There Was No Flow in One of Four Injection Legs.Caused by Sticking of Valve in Safety Injection Discharge Line to 21 Cold Leg.Valve Was Cut Out of Sys & Replaced.With 990701 Ltr
ML18107A5211999-07-0101 July 1999
Rev 0 to Sgs Unit 2 ISI RFO Exam Results (S2RFO#10) Second Interval,Second Period,Second Outage (99RF).
ML18107A4351999-06-30030 June 1999
Monthly Operating Rept for June 1999 for Salem,Unit 1.With 990713 Ltr
ML18107A4341999-06-30030 June 1999
Monthly Operating Rept for June 1999 for Salem,Unit 2.With 990713 Ltr
ML20196H8621999-06-30030 June 1999
NRC Regulatory Assessment & Oversight Pilot Program, Performance Indicator Data, June 1999 Rept
ML18107A3951999-06-17017 June 1999
LER 99-004-00:on 990520,reactor Tripped from 100% Power,Due to Negative Flux Trip Signal from Nuclear Instrumentation. Cause Has Not Been Determined.Discoloration Was Identified on One of Penetrations.With 990617 Ltr
ML18107A3661999-06-0909 June 1999
LER 99-003-00:on 990513,unplanned Entry Into TS 3.0.3 Was Made.Caused by Human error.Re-positioned Creacs Supply Fan Selector Switches & Revised Procedures S1 & S2.OP-ST.SSP-0001(Q).With 990609 Ltr
ML18107A3551999-06-0202 June 1999
LER 99-005-00:on 990504,failure to Meet TS Action Statement Requirements for High Oxygen Concentration in Waste Gas Holdup Sys Occurred.Caused by Inability of Operators. Existing Procedures Will Be Evaluated.With 990602 Ltr
ML18107A3441999-06-0101 June 1999
Interim Part 21 Rept Re Premature Over Voltage Protection Actuation in Circuit Specific Application in Dc Power Supply.Testing & Evaluation Activities Will Be Completed on 990716
ML18107A3541999-06-0101 June 1999
LER 99-006-00:on 990501,HHSI Flow Balance Discrepancy Was Noted During Surveillance.Caused by Sticking of Check Valve in SI Discharge Line to 21 Cold Leg.Valve 21SJ17,was Cut Out of Sys & Replaced.With 990601 Ltr
ML18107A3681999-05-31031 May 1999
Monthly Operating Rept for May 1999 for Salem Generating Station,Unit 1.With 990611 Ltr
ML18107A3721999-05-31031 May 1999
Monthly Operating Rept for May 1999 for Salem Generating Station,Unit 2.With 990611 Ltr
ML18107A2931999-05-12012 May 1999
LER 99-002-00:on 990413,determined That Number 12 Auxiliary Bldg Exhaust Fan Was Rotating Backwards.Caused by mis-wiring of Motor Due to Human Error by Maint technician.Mis-wiring Was Corrected & Fan Was Returned to Svc.With 990512 Ltr
ML18107A2781999-05-10010 May 1999
LER 99-004-00:on 990411,automatic Actuation of ESF Occurred During Reactor Vessel Head Removal in Support of Refueling Operations.Caused by High Radiation Condition.Containment Atmosphere Was Monitored.With 990505 Ltr
ML18107A2791999-05-0404 May 1999
LER 99-003-00:on 990406,all Salem Unit 2 Chillers Rendered Inoperable.Caused by Human Error.Lessons Learned from Event Were Communicated to All Operators by Including Them in Night Orders.With 990504 Ltr
ML18107A2741999-05-0303 May 1999
LER 99-002-00:on 990405,determined That Containment Isolation Valve Failed as Found Leakrate Test.Caused by Foreign Matl Blocking Valves from Closing.Check Valve Mechanically Agitated.With 990504 Ltr
ML18107A3711999-04-30030 April 1999
Corrected Monthly Operating Rept for Apr 1999 for Salem Generating Station,Unit 1
ML18107A3151999-04-30030 April 1999
Submittal-Only Screening Review of Salem Generating Station Individual Plant Exam for External Events (Seismic Portion), Rev 1
ML18107A2991999-04-30030 April 1999
Monthly Operating Rept for Apr 1999 for Salem Unit 1.With 990514 Ltr
ML18107A2971999-04-30030 April 1999
Monthly Operating Rept for Apr 1999 for Salem Unit 2.With 990514 Ltr
ML18107A2351999-04-23023 April 1999
LER 99-001-00:on 990330,MSSV Failed Lift Set Test.Caused by Setpoint Variance Which Is Result of Aging.Valves Were Adjusted & Retested to Ensure TS Tolerance.With 990423 Ltr
ML18107A2881999-04-0707 April 1999
Rev 0 to NFS-0174, COLR for Salem Unit 2 Cycle 11.
ML18107A1821999-03-31031 March 1999
Monthly Operating Rept for Mar 1999 for Salem,Unit 1.With 990414 Ltr
ML18107A1831999-03-31031 March 1999
Monthly Operating Rept for Mar 1999 for Salem,Unit 2.With 990414 Ltr
ML18106B1471999-03-29029 March 1999
LER 99-001-00:on 990228,reactor Scram Was Noted as Result of Turbine Trip.Caused by Operator Error.Lesson Plans Revised to Explicitly Demonstrate Manner in Which Valve Functions. with 990329 Ltr
ML18106B1021999-02-28028 February 1999
Monthly Operating Rept for Feb 1999 for Salem Unit 2.With 990315 Ltr
ML18106B1011999-02-28028 February 1999
Monthly Operating Rept for Feb 1999 for Salem Unit 1.With 990315 Ltr
ML18106B0931999-02-25025 February 1999
Part 21 Rept Re Possible Defect in Swagelok Pipe Fitting Tee,Part Number SS-6-T.Caused by Crack Due to Improper Location of Heated Bar.Only One Part Out of 7396 Pieces in Forging Lot Was Found to Be Cracked.Affected Util,Notified
ML18106B0701999-02-16016 February 1999
LER 98-015-00:on 981208,inadvertent Discharge Through RHR Relief Valve During Startup Was Noted.Caused by Operator Performing Too Many Tasks Simultaneously.Appropriate Actions Have Been Taken IAW Policies & Procedures.With 990216 Ltr
ML18106B0551999-02-0101 February 1999
Part 21 Rept Re Possible Matl Defect in Swagelok Pipe Fitting Tee,Part Number SS-6-T.Defect Is Crack in Center of Forging.Analysis of Part Is Continuing & Further Details Will Be Provided IAW Ncr Timetables.Drawing of Part,Encl
ML18106B0561999-01-31031 January 1999
Monthly Operating Rept for Jan 1999 for Salem Generating Station,Unit 2.With 990212 Ltr
ML18106B0571999-01-31031 January 1999
Monthly Operating Rept for Jan 1999 for Salem Generating Station,Unit 1.With 990212 Ltr
ML20205P1671999-01-31031 January 1999
a POST-PLUME Phase, Federal Participation Exercise
ML18106B0441999-01-29029 January 1999
Part 21 Rept Re Possible Defect in Swagelok Pipe Fitting Tee Part Number SS-6-T.Caused by Crack in Center of Forging. Continuing Analysis of Part & Will Provide Details in Acoordance with NRC Timetables
ML18106B0491999-01-28028 January 1999
LER 98-007-01:on 980730,reactor Coolant Instrument Line through-wall Leak Was Noted.Caused by Transgranular Stress Corrosion Cracking.Replaced Affected Tubing.With 990128 Ltr
ML18106B0401999-01-18018 January 1999
LER 98-016-00:on 981219,ECCS Leakage Was Outside of Design Value.Caused by Leakage Past Seat of 21RH34 Manual Drain. Valve 21RH34 Was Reseated.With 990118 Ltr
ML18106B0251998-12-31031 December 1998
Monthly Operating Rept for Dec 1998 for Salem Unit 2.With 990115 Ltr
1999-09-30
[Table view] |
Text
OPS~G -
- Public Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038-0236 Nuclear Business Unit J1~N 0 8 1997 LR-N97025 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 LER 272/96-035-00 SALEM GENERATING STATION - UNIT 1 FACILITY OPERATING LICENSE NO. DPR-70 DOCKET NO. 50-272 Gentlemen:
This Licensee Event Report entitled "Inadequate Testing of the Technical Specification Required Load Shed of Vital Busesn is being submitted pursuant to the requirements of the Code of Federal Regulations 10CFR50. 73 (a) (2) (i) (B).
0~(~1~
David ~archow General Manager Salem Operations Attachment DVH C Distribution LER File 3.7 9701130152 970108 PDR ADOCK 05000272 S PDR The pmwr is in your hands.
95-2168 REV. 6/94
NRC FORM 366 u.s_ NUCLEAR REGULATORY COMMISSION APPROVED BY OMB NO. 3150-0104 (4-95'j EXPIRES 04130/98 ESTIMATED BURDEN PER RESPONSE TO COMPLY WITH THIS MANDATORY INFORMATION COLLECTION REQUEST: 50.0 HRS.
REPORTED LESSONS LEARNED ARE INCORPORATED INTO THE LICENSEE EVENT REPORT (LER) LICENSING PROCESS AND FED BACK TO INDUSTRY. FORWARD COMMENTS REGARDING BURDEN ESTIMATE TO THE INFORMATION AND RECORDS MANAGEMENT BRANCH (T~ F33), U.S. NUCLEAR (See reverse for required number of REGULATORY COMMISSION, WASHINGTON, DC 2055~001, AND TO THE PAPERWORK REDUCTION PROJECT (3150-0104), OFFICE OF digits/characters for each block) MANAGEMENT AND BUDGET, WASHINGTON, DC 20503.
FACILITY NA*E (1) DOCKET NU*BER (2) PAGE (3)
SALEM GENERATING STATION UNIT 1 05000272 1 of 4 TITLE (4)
Inadequate Testing of the Technical Specification Required Load Shed of Vital Buses EVENT DATE (5) LER NUMBER (6) REPORT DATE (7) OTHER FACILITIES INVOLVED (8)
MONTH DAY YEAR YEAR SEQUENTIAL IREVISION MONTH DAY YEAR FACILITY NAME DOCKET NUMBER I NUMBER NUMBER Salem Unit 2 FACILITY NAME 05000311 DOCKET NUMBER 12 10 96 96 - 035 - 00 01 08 97 OPERATING N THIS REPORT IS SUBMITTED PURSUANT TO THE REQUIREMENTS OF 10 CFR §: (Check one or more) (11)
MODE (9) 20.2201(b) 20.2203(a)(2)(v) x 50. 73(a)(2)(i) 50. 73(a)(2)(viii)
POWER 000 20.2203(a)(1) 20.2203(a)(3)(i) 50. 73(a)(2)(ii) 50. 73(a)(2)(x)
LEVEL(10) 20.2203(a)(2)(i) 20.2203(a)(3)(ii) 50. 73(a)(2)(iii) 73.71 20.2203(a)(2)(ii) 20.2203(a)(4) 50. 73(a)(2)(iv) OTHER 20.2203(a)(2)(iii) 50.36(c)(1) 50. 73(a)(2)(v) Spec~in Abstract below or in C Form 366A 20.2203(a)(2)(iv) 50.36(c)(2) 50. 73(a)(2)(vii)
LICENSEE CONTACT FOR THIS LER (12)
NAME TELEPHONE NUMBER (Include Aree Code)
Dennis v. Hassler, LER Coordinator 609-339-1989 COMPLETE ONE LINE FOR EACH COMPONENT FAILURE DESCRIBED IN THIS REPORT (13)
CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE TONPRDS TONPRDS
'YES SUPPLEMENTAL REPORT EXPECTED (14)
(If yes, complete EXPECTED SUBMISSION DATE).
IXINO EXPECTED SUBMISSION DATE(15)
MONTH DAV VEAR ABSTRACT (L1m1tto 1400 spaces, i.e., approximately 15 single-spaced typewritten lines) (16)
Technical Specifications 4.8.1.1.2.d.3 and 4.8.1.1.2.d.6 require, in part, verification of Diesel Generator operability at least once per 18 months during shutdown by simulating a loss of off site power (with and without an accident signal) , and verifying the vital bus de-energizes and sheds load. This requirement was not adequately completed because a remote indicating lamp powered from the de-energized vital bus was monitored to verify load shed for a Chiller.
The cause of the inadequate load shed verification is attributed to a lack of adequate controls for the development and maintenance of Technical Specifications surveillance procedures.
The load shed feature was satisfactorily tested, and the Unit 2 procedures were revised. The Unit 1 procedures will be revised prior to their next use.
This event is reportable in accordance with 10 CFR 50.73(a) (2) (i) (B) , any condition prohibited by the Plant's Technical Specifications.
NRC FORM 366 (4-95)
NRC FORM 366A (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION u.::;. ~UCLEAR REGULATORY COMMISSION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 2 OF 4 SALEM GENERATING STATION UNIT 1 96 - 035 - 00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17)
PLANT AND SYSTEM IDENTIFICATION Westinghouse - Pressurized Water Reactor Emergency Diesel Generators {EK}
Chilled Water System {KM}
- Energy Industry Identification System (EIIS) codes and component function identifier codes appear in the text as {SS/CC}
CONDITIONS PRIOR TO OCCURRENCE At the time of identification, Salem Units 1 and 2 were shutdown and defueled.
The Technical Specification surveillance Mode applicability is 1 through 6.
DESCRIPTION OF OCCURRENCE Technical Specifications 4.8.1.1.2.d.3 and 4.8.1.1.2.d.6 require, in part, verification of Diesel Generator {EK/DG} operability at least once per 18 months during shutdown by simulating a loss of offsite power (with and without an accident signal), and verifying that its associated Vital Bus {EK/BU} de-energizes and sheds load. This requirement was not adequately completed because a remote indicating lamp, powered from the de-energized vital bus, was monitored to verify load shed.
Technical Specification (4.8.1.1.2.d.3 and 4.8.1.1.2.d.6) required testing was initiated on November 21, 1996, in preparation for entry into Mode 6 for Salem Unit 2. While reviewing the 2C Vital Bus test, a Senior Nuclear Shift Supervisor (SNSS) questioned whether verification of Chiller {KM/CHU} load shedding from the Control Room using remote indications was adequate. The remote indicating lamp for the Chiller Breaker {KM/52} does not provide a true indication of load shed because the indicating lamp is powered from the Vital Bus. These indicating lamps are de-energized when power is removed from the bus, whether or not the chiller breaker has tripped. Therefore, the Chiller Breaker load shed feature which is required to be tested by the Technical Specifications was not being verified.
A review of the past two revisions of the associated procedures was performed to determine whether the testing had been conducted properly in the past. The review indicated that the last performance of the Unit 1 and 2 procedures had used invalid indicators as Acceptance Criteria. A historical review of procedure revisions was conducted. Based on the review of these historical procedures, the Technical Specifications requirements to verify vital bus load shedding may not have been completely satisfied for either Salem Unit 1 or 2 since initial plant operation.
NRC FORM 366A (4-95)
NRG FORM 366A (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION U.S. NUCLEAR REGULATORY COMMISSION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) 05 00027 2 YEAR I SEQUENTIAL NUMBER I REVISION NUMBER 3 OF 4 SALEM GENERATING STATION UNIT 1 96 - 035 00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17)
DESCRIPTION OF OCCURRENCE (Cont'd)
A review of Technical Specifications history for Salem Units 1 and 2 indicates that verification of load shedding has been a requirement since initial issue of the Technical Specifications. The Unit 1 Technical Specifications originally required verification of load shedding with a Loss Of Offsite Power (LOOP) concurrent with an ESF (Engineered Safety Features) actuation test signal. The requirements were expanded in Amendment 148, dated November 30, 1993, to include a test for load shedding on a LOOP in addition to the test for load shedding on a LOOP with an ESF actuation test signal. The requirements for Unit 2 have required both tests since initial issue of Technical Specifications.
CAUSE OF OCCURRENCE The cause of the inadequate Chiller load shed verification is attributed to a lack of adequate controls for the development and maintenance of Technical Specifications surveillance procedures.
PRIOR SIMILAR OCCURRENCES The cause of this event was initially described in LER 311/95-008. A review of LERs for Salem Units 1 & 2 identified eleven LERs related to missed surveillances due to procedural deficiencies issued within the past two years (LER 272/96-026, LER 272/96-024, LER 272/96-016, LER 272/96-006, LER 272/96-005, LER 272/96-004, LER 272/94-008, LER 311/96-013, LER 311/96-011, LER 311/96-007, and LER 311/95-008)
Corrective actions from the above LERs were implemented to address the specific deficiencies identified in each respective LER. The Technical Specifications Surveillance Improvement Project (TSSIP) has been implemented to address the long standing programmatic deficiencies associated with the implementation and maintenance of Technical Specifications surveillance procedures. A full description of the TSSIP is included in LER 311/95-008.
NRC FORM 366A (4-95)
NRe FORM 366A (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION U.S. N:JCLEAR REGULATORY COMMISSION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) 05 0 0 02 72 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 4 OF 4 SALEM GENERATING STATION UNIT 1 96 - 035 - 00 TEXT (If more space is required, use additional copies of NRC Form 366A) (17)
SAFETY CONSEQUENCES AND IMPLICATIONS There were no safety consequences as a result of this occurrence. Follow up testing of Chiller load shedding on Vital Buses 2A, 2B and 2C demonstrated satisfactory circuit operation. In addition, the testing demonstrated that loads sequenced onto the bus, and confirmed the ability of the Diesel Generators to carry the load required by Technical Specifications.
The health and safety of the public was not affected.
CORRECTIVE ACTIONS
- 1. Subsequent testing verified proper load shedding of the Chiller Breakers.
- 2. The Unit 2 test procedures were reviewed for additional problems related to improper use of indicators to verify load shedding. No additional problems were identified with the Unit 2 procedures.
- 3. The Unit 1 test procedures will be reviewed for problems related to the improper use of indicators to verify load shedding prior to entry into Mode 6.
- 4. The associated Unit 2 procedures were revised on December 7, 1996 to incorporate local verification of Chiller load shedding.
- 5. The associated Unit 1 procedures will be revised prior to entry into Mode 6.
- 6. A Technical Specification Surveillance Improvement Project (TSSIP) was initiated as a corrective action of LER 311/95-008. The TSSIP is also applicable as a corrective action to this occurrence. (Refer to LER 311/95-008 for a full description of the TSSIP.)
NRC FORM 366A (4-95)
