ML20140H301
| ML20140H301 | |
| Person / Time | |
|---|---|
| Site: | Point Beach  |
| Issue date: | 02/28/1997 |
| From: | WISCONSIN ELECTRIC POWER CO. |
| To: | |
| Shared Package | |
| ML20140G761 | List:
|
| References | |
| WO-9612056, NUDOCS 9705130053 | |
| Download: ML20140H301 (11) | |
Text
.
WO WORK PLAN Removal / Replacement of breakers lY-06-05 WO9612056 UNIT 1 February 27,1997 1.0 PURPOSE This WO work plan provides direction for the removal of breaker lY-06-05 and replacement with Westinghouse EHD 101515 amp breaker.
2.0 INITIAL CONDITIONS j
l
- 1. Reactor is offime.
- 2. Verify loads listed in Return to service step 16 can be taken OOS.
- 3. Permission has been granted to remove / replace breakers 1Y-06-05.
- 4. Preseparator alarms may come in if not in alarm.
3.0 ATTACHMENTS 3.1 Maintenance Electrical Safety Checklist. PBF-9044 form 3.2 Wire Removal Form, PBF-0036 4.0 REFERENCE DRAWINGS Westinghouse Elementary drawings 844,and 845 5.0 MATERIALS Westinghouse EHD 1015 breaker (Quantity 1) 9705130053 970505 PDR ADOCK 05000301 P
PDR,
Page 1 of 4
WO WORK PLAN i
Removal / Replacement of breaker lY-06-05 WO 9612056 UNIT 1 February 27,1997 IIold Step Point No.
Work Plan Description Worker Date l
NOTE Breaker 1Y-06-OS provide power to Unit i Preseparator System, Verify initial conditions have been met.
gff/ff g
- CAUTION
- ALL COSIPONENTS AND TER5flNALS LOCATED IN TIIE PANEL ARE ASSU51ED TO BE ENERGIZED, TAKE NECESSARY PRECAUTIONS.
l FME:
General FME Statement: Tools and equipment shall be checked for loose parts and debris and temporary covers should be installed for foriegn material exclusion (FME) of system / components, per Exclusion of Foreign Material from Plant Components and systems, NP 8.4.10.
2 Responsible Engineer to perform a pre-job briefing with all workers to include 4 g,i/
scope of project, personnel safety, electrical safety checklist, and installation.
RE 3
Prior to installing the replacement breakers, cycle breakers five times per the f..fy,//
following directions; MTN
- 1. Close breaker
- 2. Trip breaker using the trip to test button (red) on breaker,
- 3. Open breaker.
- 4. Use continuity checks to verify ptoper positioning of breaker contact on final cycle (closed, trip free, and open Acceptance Criteria: Closed i 1 ohm / Open > 1 Mohm MTE N/( 8Wi 9 Calibration Due Date
'/ Y 4
Verify that breaker 1Y-06-05 is in the "OFF" position OR coordinate with OPS 2 ?PU i
to place breaker 1Y-06-05 " "OjFLp MTN 5
Remove (if required)f i dpan'eT cEer. Post panel with appropriate Danger nyty alive" placards and/or barricades as required.
MTN Record wires removed on PB4036 Wire Removal Form, then disconnect wiring g 7; 97 i
6 from breakers lY-0645.
yTN Remove breaker lY-06-05 from panel.
2 2i V':'
7 MTN
~
8 Install the replacement Westinghouse EHD 1015 breakers in lY-06-05.
%N MTN Bolt Size
- 8 610 1/4" Torque Value (in!!bs) 20 20 65h Calibration Due Date 7' Y7 MTE_ M d[$
- I Reconnect leads using attached PBF-0036 Wire Removal Form.
t W97 i
9 M FN Page 2 of 4
WO WORK PLAN Removal / Replacement of breaker lY-06-05 WO 9612056 UNIT 1 February 27,1997 10 Torque the load side leads per the following step.
2 N 7)
For breakers with capture wire connections, determine 6e wire size of the leads connected to the breaker and torque per the following table:
f k
Wire Size
- 14 to #10
- 8
- 6 to #4 Torque Value (in/lbs) 20 20 20 Record torque wrench h1TE number and calibration date on the WO and work plan.
p Mc T5 a 2 57
- n -1, as */
/
//)/ Y W Calibration Due Date N
NOTE Use calibrated digital voltmeterfor thefollowing step.
POST M AINTENANCE TEST
- y 0 ;'
PSIT*
11 A. Verify that each breaker reads 0 VAC on the load side of the breaker with h1TN the breaker open.
B. Verify that each breaker reads a nominal 120 VAC on the load side of the breaker with the breaker closed.
MTE //4//#1 I Calibration Due Date l
FME:
12 Perform a Foreign Materials Exclusion inspection of panel to verify all tools am LIM 7 foriegn materials are removed MTN i
13 Reinstall panel cover.
, MTN _
7'27 6l 14 Record all QM, MTE and tot numbers on WO.
1 U/
l M1N 1Y-06-05 16 RETURN TO SERVICE TESTING Verify power to the following loads; Y
87 U t'd
'/
- 1. Unit 1 Preseparator System l
I l
l l
Page 3 of 4
l WO WORK PLAN t
l Removal / Replacement of breaker 1Y-06-05 WO 9612056 l
l UNIT 1 February 27,1997 l
l Comments:
l i
1 i
I 1
h Page 4 of 4
Point Beach Nuclear Plant
)
WIRE REMOVAL LOG Sheet
_ of _
This log to be used when snore than one wire is lifted at a time.
bib 47 7 ' h[ 4 7 Restoration Date Removal Date NOTE: Use of thisform does not supersede any of the requirements of PBNP 3.1.1 Independent Veryication and Concurrent i
Checks.
1
/
Fill in the applicable block (s)
Initials Location TB No.
Wire No.
Color Fint Wire Wire Second Person Removed Restored Person Check Check i
-m a
r-
~
(Yob S
f) 6t1
,~>
i~
j z.;
I l
~
i i
1 Attach this form to the procedure or MWR.
h OO Other SMP/RMP/ICP No.
MWR No.
PSF-0036 Revision 2 04C9/94
UNIT: PB1 ADD / REVISE EQU1PMENT - DATA SCREEN 1
<<< System: Y
CH510lM 11/03/95 EQUIP ID: Y-06-05 Physical Letn: 44/CB/CR WEST EQUIP NAME: PWR TO U1 MOISTURE PRESEPARATOR SYSTEM PARENT / EQUIPMENT ID:
TRACKING ID: PB1 Y-06-05-AA Text ID:
PSI Text ID:
Tracking Desc: PWR TO U1 MOISTURE PRESEPARATOR SYST Tech Manual Ctl:
Equip Group: CKTBKR Equip Type:
Resp Group: MTN WO No: 9612056 Mfg Code: WEST WESTINGHOUSE ELECTRIC CO.
Vendor Code:
Model No: EHD1030 Serial No: 6629C92G07 QA: N FP: N OPERABILITY CR REF:
SDR: SDR -S-Y SR: N A/P: P Pre-Test: N SE-RPT:
Appendix R: N EQ: N SSA: Y Post-Test: N EQ-RPT:
Unit Shared: N CIV: N QA Codes:
CMP:
Safegrd Train:
SEIS: 3 DSS Notification: Y Special Notification:
LCO: N M-RULE: Y NPRDS:
NPRDS (Y/N):
Unit:
Component ID:
Utility ID:
System ID:
Utility System ID:
PF2 - REPAIR COST PF6 - NEXT RECORD PF10 - PWR SUP PF20 - MODEL PF3 - EQ MENU PFil OPEN WO PF22 - PSI TEXT PF4 - RESET PF8 - NEXT PAGE PF12 - DETAIL PF23 - TEXT PF5 - PREV RECORD PF9 - PREV SCREEN PF19 - BRWS TRK ID PF24 HISTORY i
0 l
l l
1 l
O W
g
DANGER TAG REOUEST Work Control Document #
9/s / p cd-[p I Tirr.e/Date of application:
72-A/-97
/630 Time /Date Tags Required: o 700 A,2 p,- Pd, Requesting Indnidual:
Requestmg Work Group: ///o;moam
}
Responsible Supervisor: f/ur,./u/ G,o;sm,.
Estimated Job Completion (Time /Date):
I NOTE: If TS required equipment is to be disabled, the initiating work group shallinitiateform PBF-9133.
Equipment ID:
/-Ola -o5-Unit:
/
Scope of Work:
/.f./4c,_ / Ire _. /c.,<
Additional Work Control Documents l
Reconunended Danger Tagging / Explanation:
No Tags Req'd: @
DouMe Le lation:
s Positive Control:
Grounding Reg'd:
Partial Removal Reg'd: O NOTE:
The 501P/lWP/SSIP/Mork OrderMork Plan may be referenced abovefor the recommended danger tagging.
References:
(NOTE: 3fust include Rev. numberfor controlled documents used to verify adequacy.)
l l
Information:
l l
l Appendix R: 0 Yes No If yes, attach Fire Round Sheet Preparer:
LCO Req'd:
0 Yes No If yes, attach LCO Tracking Form PBF-9133 Date:
Reviewer Date Approver (SRO)
Date l
NOTE: Additional reviews and approvals req'dfor changes or additions to original tagout. Describe changes in
' formation section.
Rewiewer Date Approver (SRO)
Date Reviewer Date Approver (SRO)
Date Danger Tags No Longer Required and Protected Worker Log Sign-Offs Complete Tag Series No Responsible Supenisor Date PDF.1906a
i l
l i
(
l SRO Procedure and Non-Onerations Work Plan Review 1
All ITs, TSs, and Non-Operations work plans on Maintenance Rule or Safety j
Related or DSS Notification required work orders, to ensure they adequately l
l establish initial conditions, equipment recovery actions (e.g. valve line-upsk and
{
independent verification of recovery actions. - Problems identified are to be corrected before use. This form documents the required review has been completed.
Procedure or Non-Operations work plan reviewed.
1 F '76. / 2 CS C. '
/4 0 2-lz 2l97 SRO (Reviewer)
Date i
l i
I PBF-2113 Revision 0 01, 4.97 j
__ =_.
l t
Work Order / Document No. f/,//cof/,
Return to Service Testing Reviews I
INITIALS Pre-Release / Pre or Post-RTS
/
f
('I Work Group Post-Maintenance Testing VKON ' O' V he_ e0 \\_om *a toe 6V %\\4L d%R3. c?Q g~*
VE(LtN lZo V A:. e c % s u e 5 %M d ict CWcc y oll Section XI Eauipment Y /f9 Ocerabilitv Testine Ess e - StM * /4.-
I Inserv g le Nene
/
)
ENGINEERING REVIEW
}Jl' f /'
SECTION XI ENGINEERING REVIEW h
.l 'Y
/
PBF 2tl4 Revision 0 Ot/MH
N mts(' TD Yl() g b
GRIGINAL
40 Priority-4
- UNIT i
- MUD
- UNIT 1
- 6 Resp Grcup: HTN HEADER PAN
!+ep Pr'n' 02,2 Vo~"
Equipment-Y-06-03 Sus +en-Y HP Tere Eq uipment Name- ?WR TO iMOB-71 MD in0B-90 Physica: Loca+ ion-44/CB/CR NEI' D!rcover" Da*e
- o / :' "
'robtem Descri ? tion-REPLACE DREAKER UITH PROPER SIZE BREAKER TO PROVIDE CCRRECT CLPCUIT PROTECTION Originator-65i6 Outage ID-1.!iR24 Activir" 0889 Tag / Sticker Placed-T No: 99060 Tag /S-icker Lctn-
!ob Type: CORRECTP/E MAINTENANCE P r r..i e c t ID-Ccndition Report-Work runction: WORK ORDER Mod Req C-96 - 069
=========================================================================.
QA: N SEIS-3 Operabitity Pre-Test-H Procedures-SR: N LCO: N EQ' N P t4 T - Y Operabitity P o s + --% s t - N Proceditres SSA-Y CIV-N hRULE f
A/P P
CcCC:
RRN-Tech Spec Ref GA Codes-Sec+ XI Class Toc!.s Needea-
=========================================_;;=========================
W a r 's c' tan /Instruc+ ions reviewed.
D'.anner WMiLIN RICi' CON 99~E
- 2. _ / 2 p,G._ -
- 1. T.. N F C U P E R W. S 0. ;
- P. !U 0 9 % i3 !.
N Ai4F.._
.=======================================================,.=========
Plan + Cord!tione COLD SFUTDCNN Ignition Control Perair-N Other Conditions-Trans,en+ Comoustible Peroit M
Fire Barrier Penetration Permit N
RUP N
Equipment 15cta' ton Required
- -#'-/7 WME-Isolation Tag Series 4-Operabiti / 3re-Test Campte+e Ea. u i p me n t Iso L a ', on as r eq ues t ed..____
Permission granted to perform Werk f
Ops DST Notification Req: Y Ops DSS S i:ma t ure :
._._ Date-.A/ll'f7
======================.=======================f..=====================
Speciat Notification:
Number of Steps' 001 Acct ?-
00
- 00000
- 1200141
- 00000 MFG Code: WEST Tech Manua l Cnt t t
=====_=============================================================
- WORK ORDER CLOSE0lJT
- i 1
=============================================================================== j Group Head Signature:
Date-1/E /S l
i
===================================================================
l l
I
i i
Om r r.r H. AiT..-
- m**m*
PW
- m.u w e uA n N...- - n /_ 4. o ne.. n.. m K.
J cw UO Priority-a
- UNIr 1
- HNO 4 UNIT ' 4 Resp Crcup-MTN n m *****
STEP DETAIL
- m um cten or!ni M L. m' Equ!paent Y-36-03 S W en-HP Zere-Equipment Name-PWP TO iMOF + AND iMOB40 Physicat Lccatien-4/CD/CR UEST Sea.uence No: 01 Meed Dan Shert Desc: REF'. ACE BREAKER Sched 5+ar+ Da w
= = = = = = = = = = = = = = = = =. = = = = = = = = = = = = = = = = = = = =. = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = - =
Pl. ANNED -
WORK PROCEDURET Crew: ME Sh!ft-D j
Class: 420 1
l
===================,==============================================
Work Plan Descrip+ ion-REPLACE DREAKER USING ATTACHED UOFK PLAN 4
ALL QC, FME. AND PMT ADDRESSED IN ATTACHED UORK PLAN.
============================================================================:=~ l Ly' oe'a. r eW Ri_.n+ U. I r.P_ D -
.N
.D A T..P_
../ _.. /,
3 m.
= = = = = = = = = = = = = u = = = = M..,_.=...=..=.=_.=. = =.
= = = = = = = = = = = = = = = = = - = = = = = = = = = = = =3...=K h e_. - ~Z..'.
... _ d.. e <'._k
/e#d.. -
WORK PERFORMED:
R u
<'~~.
_.-_._-t_'e._..a..f_p.....-./%._._.A..)_.6.__._.__._-_.......-..._.._.....__..-........_.-_._.
l
_. _ _. - _ -... _ = _. -... _....
J
-===
=r=
=,===,
=
.:=========e.=====================.===============&=.d..V.A_._-
.g... p. _m..,R....
- . a. R -. l.3 cG.. (.ci.
Hic-
..._7_5 _- 6_ _. _.
=============================u=====================================
A.CTUAl U"ED:
C V._ U -
SHIFT: - _..
WORKER CLAS?
NUMBER OF UORKERS- _ _ _...
TOTAL HOURS TTL EXPOSURE / STEP : MREM)
===================================================================
l PARTS USED LIST AT AC*ED-Y/O WO TAGS REMOVED:
/ N / NA UORK COMPLETE DATE 2_ / 7E 9
~~'
EMPLOYEE NUMBER ! !
!'U. % 2!
EMP!.0YEE NAME. -
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = ' * = = = = = = = = = = = = = = = = = = = = =
- UORK COMPLE ED
- Cause Failure Code-PM / SVC / NRM / _D RS__
As Found-Out of Spec Y / @ / NA Mach ne History Rev!ew Required-Y / N
.,.:i i L e omponent Corrective Action: N A @/ R E / _ _ _ _ _ _ _
Downtine-hrs
_._______ DATE__ d /_1_ /9 LINE SUPERVISOR- @l6lQl113!3 NAME
===================================================================
EQUIPMENT RETIJPN TO SERC CE Operability Pcst Testirq- _
_e.f_a_
/ o_ _rt_ __-- __._._ _._....
Op er a b i l. i t v. Procs Performed on e RETURN DATE-
/
/__ TIME _.___
EQUIP. TAKEN 005 - DATE:
./
/
TIME:
NON OPS SUPV:
l_.1_;_i-l_!._!
NAME:
_________.___._. DATE
/
/
._._ _ _ _._ _._ _ _. - _._._ - _ D A T E :
._ /9_7
___n_._
DSS- !Pl l I... t /.. ' i NAME-
.-