LIC-02-0007, Correction to Fort Calhoun Station'S (FCS) Discussion of Control Element Drive Mechanism (CEDM) Housing Reliability Figure 4

From kanterella
Jump to navigation Jump to search
Correction to Fort Calhoun Station'S (FCS) Discussion of Control Element Drive Mechanism (CEDM) Housing Reliability Figure 4
ML020630662
Person / Time
Site: Fort Calhoun Omaha Public Power District icon.png
Issue date: 02/07/2002
From: Frans M
Omaha Public Power District
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
LIC-02-0007, LIC-02-0017
Download: ML020630662 (2)


Text

Om mm Omaha Public Power0itrict 444 South 16th Street Mall Omaha NE 68102-2247 February 7, 2002 LIC-02-0017 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555

References:

1. Docket No. 50-285
2. Letter from OPPD (R. L. Phelps) to NRC (Document Control Desk), dated October 15, 2001, "Fort Calhoun Station (FCS) Discussion of Control Element Drive Mechanism (CEDM) Housing Reliability" (LIC-02-0007)

SUBJECT:

Correction to Fort Calhoun Station's (FCS) Discussion of Control Element Drive Mechanism (CEDM) Housing Reliability Figure 4 In Reference 2, Omaha Public Power District (OPPD) provided additional information on the factors affecting material reliability management of the CEDM housings. A transcription error has been found in Figure 4 of that submittal. The schedule of piping has been corrected from "sch. 100" to "sch.160." Attached is the replacement page correcting Figure 4.

Please contact me if you have any questions.

Sincerely, M. T. Frans Manager, Nuclear Licensing MTF/RLJ/rlj 0N Attachment c: E. W. Merschoff, NRC Regional Administrator, Region IV A. B. Wang, NRC Project Manager W. C. Walker, NRC Senior Resident Inspector Winston & Strawn Employment with Equal Opportunity 4171

Attachment Fort Calhoun Station LIC-02-0007 Discussion of Control Element Drive Mechanism Housing Page 15 Reliability Overlay Weld -- \ I Note: C - Compression T - Tension Control Element Drive Mechanism Upper Housing Assembly Overlay & Butt Weld Geometry DWG NO DRAWN KIRBY D. WOODS Figure No. 4 IISSUED November 29, 2001 ISCALE None November29, 21131 SCALE None