ML17201Q527
| ML17201Q527 | |
| Person / Time | |
|---|---|
| Site: | Point Beach  |
| Issue date: | 05/23/2017 |
| From: | Seymour J L Operations Branch III |
| To: | Point Beach |
| Shared Package | |
| ML16319A342 | List: |
| References | |
| Download: ML17201Q527 (5) | |
Text
ES-301 Transient and Event Checklist Group 1 Form ES-301-5 Facility:
Date of Exam:
Operating Test No.:
A P P L I C A N T E V E N T T Y P E Scenarios 1 2 4 T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I SRO-U SRO-I 1 RX 4 2 2 1 1 0 NOR 1, 2 2 1 1 1 I/C 1, 2, 5 3, 4, 8 3, 5, 7 9 4 4 2 MAJ 6 6 6 3 2 2 1 TS 1, 3 2 0 2 2 RO SRO-I SRO-U SRO-I 2 RX 4 2 2 1 1 0 NOR 1 1, 2 3 1 1 1 I/C 5 3, 4, 5 4, 8 6 4 4 2 MAJ 6 6 6 3 2 2 1 TS 3, 4 2 0 2 2 RO SRO-I SRO-U SRO-I 3 RX 2 2 2 1 1 0 NOR 4 1 2 1 1 1 I/C 1, 2, 7, 8 5, 7 3, 4, 5 9 4 4 2 MAJ 6 6 6 3 2 2 1 TS 3, 4, 5 3 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs mu-the-controls -of-(BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO
-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require -hand columns.
- 4. For licensees that use the ATC operator primarily for monitoring plant parameters
, the chief examiner may place SRO
-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301 Transient and Event Checklist Group 2 Form ES-301-5 Facility:
Date of Exam:
Operating Test No.:
A P P L I C A N T E V E N T T Y P E Scenarios 1 3 4 T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I SRO-U SRO-I 4 RX 4 2 2 1 1 0 NOR 3 1 1 1 1 I/C 1, 2, 5 1, 2, 4 3, 5, 7 9 4 4 2 MAJ 6 5 6 3 2 2 1 TS 1, 3 2 0 2 2 RO SRO-I SRO-U SRO-I 5 RX 4 3 2 1 1 0 NOR 1, 2 2 1 1 1 I/C 5 1, 2, 4 4, 8 6 4 4 2 MAJ 6 5 6 3 2 2 1 TS 1, 3, 4 3 0 2 2 RO SRO-I SRO-U SRO-I 6 RX 3 2 2 1 1 0 NOR 4 1 2 1 1 1 I/C 1, 2, 7, 8 6, 7, 8 3, 4, 5 10 4 4 2 MAJ 6 5 6 3 2 2 1 TS 3, 4, 5 3 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs
-the-controls -of-(BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO
-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require -hand columns.
- 4. For licensees that use the ATC operator primarily for monitoring plant parameters
, the chief examiner may place SRO
-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301 Transient and Event Checklist Group 3 Form ES-301-5 Facility:
Date of Exam:
Operating Test No.:
A P P L I C A N T E V E N T T Y P E Scenarios 1 3 4 T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I SRO-U SRO-I 7 RX 4 3 2 3 1 1 0 NOR 1 1 1 1 1 I/C 1, 2, 5 6, 7, 8 3, 4, 5 9 4 4 2 MAJ 6 5 6 3 2 2 1 TS 1, 3 3, 4, 5 5 0 2 2 RO SRO-I SRO-U SRO-I 8 RX 4 3 2 1 1 0 NOR 1, 2 2 1 1 1 I/C 5 1, 2, 4 4, 8 6 4 4 2 MAJ 6 5 6 3 2 2 1 TS 1, 3, 4 3 0 2 2 RO SRO-I SRO-U RO 1 RX 2 1 1 1 0 NOR 4 3 2 1 1 1 I/C 1, 2, 7, 8 1, 2, 4 3, 5, 7 10 4 4 2 MAJ 6 5 6 3 2 2 1 TS 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs mu-the-controls -of-(BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO
-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require -hand columns.
- 4. For licensees that use the ATC operator primarily for monitoring plant parameters
, the chief examiner may place SRO
-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301 Transient and Event Checklist Group 4 Form ES-301-5 Facility:
Date of Exam:
Operating Test No.:
A P P L I C A N T E V E N T T Y P E Scenarios 2 3 T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I SRO-U SRO-U 1 RX 2 1 1 1 0 NOR 1 3 2 1 1 1 I/C 3, 4, 5 1, 2, 4 6 4 4 2 MAJ 6 5 2 2 2 1 TS 3, 4 2 0 2 2 RO SRO-I SRO-U SRO-I 9 RX 3 1 1 1 0 NOR 2 1 1 1 1 I/C 5, 7 1, 2, 4 5 4 4 2 MAJ 6 5 2 2 2 1 TS 1, 3, 4 3 0 2 2 RO SRO-I SRO-U RO 2 RX 2 3 2 1 1 0 NOR 1 1 1 1 1 I/C 3, 4, 8 6, 7, 8 6 4 4 2 MAJ 6 5 2 2 2 1 TS 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; -the-controls -of-(BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO
-I additiona lly serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require -hand columns.
- 4. For licensees that use the ATC operator primarily for monitoring plant parameters
, the chief examiner may place SRO
-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301 Transient and Event Checklist Group 5 Form ES-301-5 Facility:
Date of Exam:
Operating Test No.:
A P P L I C A N T E V E N T T Y P E Scenarios 2 4 T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I SRO-U SRO-U 2 RX 2 1 1 1 0 NOR 1 1 1 1 1 I/C 3, 4, 5 3 4 4 2 MAJ 6 1 2 2 1 TS 3, 4 2 0 2 2 RO SRO-I SRO-U SRO-U 3 RX 2 1 1 1 0 NOR 1 1 1 1 1 I/C 3, 4, 5 3 4 4 2 MAJ 6 1 2 2 1 TS 3, 4, 5 3 0 2 2 RO SRO-I SRO-U RO 3 RX 2 1 1 1 0 NOR 1, 2 2 1 1 1 I/C 5, 7 4, 8 4 4 4 2 MAJ 6 6 2 2 2 1 TS 0 0 2 2 RO SRO-I SRO-U RO 4 RX 2 1 1 1 0 NOR 1, 2 2 1 1 1 I/C 3, 4, 8 3, 5, 7 6 4 4 2 MAJ 6 6 2 2 2 1 TS 0 0 2 2 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; at-the-controls -of-(BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SR O-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a one-for-one basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require -hand columns.
- 4. For licensees that use the ATC operator primarily for monitoring plant parameters
, the chief examiner may place SRO
-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.