ML20237D104
| ML20237D104 | |
| Person / Time | |
|---|---|
| Site: | Limerick  |
| Issue date: | 08/17/1998 |
| From: | PECO ENERGY CO., (FORMERLY PHILADELPHIA ELECTRIC |
| To: | |
| Shared Package | |
| ML20237D103 | List: |
| References | |
| NUDOCS 9808250053 | |
| Download: ML20237D104 (400) | |
Text
{{#Wiki_filter:i I LIMERICK GENERATING STATION UNIT 1
SUMMARY
REPORT FOR THE MARCH 1,1996 TO MAY 21,1998 PERIODIC IN-SERVICE INSPECTION REPORT No. 7 BOOK 1OF2 gge2mgggggf3, A0g G PDR
TABLE OF CONTENTS i Panes Form NIS-1 Owner's Report for Inservice inspections 2
- Introduction 1 Section 1 Summary of Inservice inspections 84 Results Prior to and During Unit 1,
-7* Refuel Cycle Section 2 Summary of Reportable Conditions 1 Observed During inservice Inspection Section 3 Summary of ASME XI Repairs and 6 Replacements Form NIS-2 Owner's Report for Repairs and Replacements 205 1
1 1 l l i 1 1 t-________-._-_____--- - _ _ -. - - -J
NIS1 1RO7 Sheet 1 of 2 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules l 1. Owner PECO Eneroy Comoany 2301 Market Street. Philadelphia, PA 19101 (Name and Address of Owner)
- 2. Plant l t.imenck Generatina Station P O. Box 2300. Sanatoaa PA 19464-2300 (Name and Addrets of Plant) (
- 3. Plant Unit 1
- 4. Owner Certificate of Authorizt. tion (if required) N/A
- 5. Commercial Service Date February 1.1986
- 6. National Bnard Number for Unit 3908
- 7. Components inspected
! Manufacturer Component or Manufacturer or Installer State or National Appurtenance orinstaller Serial No. Province No. Board No. , Nuclear Reactor Vessel Chicago Bridge & tron Co. T31 B116767 3908 i Class 1,2, & 3 Piping Systems I & Supports
- 1 i
i I l I
- Traceabihty per Form N-5 Data Report Design Specification and Line Number.
I Note:
. Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,
1 (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and ' the number of sheets is recorded at the top of this form. This Form (E00029) may be obtained from the ASME Order Dept.,221.aw Drive, Box 2300, Fairfield, NJ 07007-2300
NIS1 1RO7 f Shc3 2 of 3 FORM NIS-1 (Back) l l
- 8. Examination Dates March 1.1996 to May 21,1998 9. Inspection intervalfrom February 1.1997 to February 1. 2006
{ l
- 10. Applicable Editions of Sectsn XI 1986 /ddenda N/A
- 11. Abstract of Examinations. Include a :ist of examinations and a statement conceming status of work required for current interval.
SEE: Section 1, Summary of inservice inspection Results
- 12. Abstract of Conditions Noted.
SEE: Section 2. Summary of Reportable Conditions Observed j
- 13. Abstract of Corrective Measures Recommended and Taken. {
SEE: Section 3, Summary of ASME Section XI Repairs and Replacements ' We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Corte, Section XI. Certification of Authonzation No. (if applicable) N/A Expiration Date m N/A Date Auaust / 19 98 Signed PECO Enerav Company By Owner CERTIFICATE OF INSERVICE INSPECTION 1, the undersgned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and empicyed by H S B i & 1 Company of Hartford. Connecticut have inspected the components desenbed in this Owner's Report dunng the penod March 1,1998 to May 21.1998 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from r conne edph this ins e
/ Commissions PA 2497 f.N&A inspectors Sgnature / N-tiorial Board, State, Province, and Endorsements Date 8/5 is 98
I l INTRODUCTION During the period from March 1,1996 through May 21,1998, inservice Inspections were performed at Limerick Generating Station Unit 1. Unit 1 was shutdown for a scheduled refuel outage during the period April 3 through May 21,1998. The inspections performed during this period were credited towards the first period of the second ten year interval. Examinations completed during this period were performed by PECO Energy Company and General Electric Company in accordance with the requirements of ASME Section Xi,1986 , Edition. In addition to ASME Section XI, other examinations were performed to meet numerous augmented inspection requirements. The authorized inspector provided performed a review of these inspections with the exception of the supplemental ultrasonic examination of reactor vessel intemal core spray piping welds. The augmented inspection requirements are as follows: Generic Letter 88-01 Intergranular Stress Corrosion Cracking NUREG-0619 BWR Feedwater Nozzle Cracking { l I.E. Bulletin 80-13 Cracking in Core Spray Spargers NUREG-0800 No Break Boundaries SIL 455 ISI of Alloy 182 nozzle Weldments J FSAR Table 3.2-1 Non-Q RPV Intemal Components SIL 420 Inspection of Jet Pump Sensing Lines l SIL 474 Steam Dryer Drain Channel Cracking SIL 554 Top Guide Cracks BWRVIP-18 Core Spray Intemals inspection and Flaw Evaluation Guidelines i BWRVIP-41 Jet Pump Assembly inspection and Flaw Evaluation Guidelines NCR # 97-00484 Examination for Alignment of Reducing insert to Safe End NCR # 92-00114 HV-51-1F015B Valve Intemal Surfaces l l l l l 1 l
SECTION 1 1
SUMMARY
OF IN-SERVICE INSPECTION RESULTS PRIOR TO AND DURING 7 REFUEL OUTAGE LIMERICK GENERATING STATION l UNIT 1 MARCH 1,1996 TO MAY 21,1998 l L l l
LIMERICK GENERATING STATION PAGE.0 DATE . REVISM ( INSERVICE INSPECTION
SUMMARY
SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (1998) ~[ REACTOR PRESSURE VESSEL 2 6 NR R $ 3 ASME 4 5 s OE oE SEc.XI T RCEP
SUMMARY
EXAMINATIONAREA CATGY EXAM A E O O O REMARKS NLNBER IDENTIFICATION frEM NO METHOD PROCEDURE T C R M R "CAUBRATIONBLOCK"
SUMMARY
OF EXAMINATION LEGEND
- 1. Identification of system. ,
- 2. Component identification and description.
- 3. ASME Section XI Category and item Number applicable to the component. If there is an augmented requirement to perfomi an examination, then "N/A" will appear in this location.
- 4. Exam method (NDE) applicable to the component.
- 5. N.0E procedure used to perform the examination on the component.
- 6. Exam Status:
a) C= Completed b) U= Unscheduled Complete c) P= Preservice Complete d) A= Augmented Complete e) E= Expanded Scope Complete
- 7. Examination results broken down into 5 categories described below:
a) NOREC = No recordableIndications detected b) RECOR = Recordable indications detected c) GEOM = Geometric indications detected d) REPOR = Reportable indications which require corrective action to maintain structural adequacy
- 8. Remarks field which contains specific information conceming the component examination or evaluation of examination results.
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 1
'REVISIO2s 1 INSERVICE INSPECTION SUht4ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF)
CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUh94ARY EXAMINATION AREA CATGY ERM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS CS (REF. DWG NO. 04-01) 100050 CSA 001 PT LP-LIM-001V3 R1 X-.. (C0177022) 10*X12" REDUCER TO 10" PIPE B-J+ UT-45S UT. LIM-102VO RO X.-- 11 ,303,400/300 B9.11 100051 CSA 001 UT-458 UT-LIM-102VO R0 X--- EXAMINED PER AUG-01, NRC CL 88 01, 10'X12' REDUCER TO 10" PIPE N/A+ INTERGRANULAR STRESS CORROSION CRACKING.
'11 .303,400/300 N/A (C0177022) 100060 CSA 001A PT LP-LIM-00'1V3 R1 X.-. (C0177022) 10' PIPE TO PIPE B-J+ UT-4 5S UT-LIM-102VD R0 X. ..
11 ,303.400/300 89.11 100061 CSA 001A UT-45S W-LIM-102VD R0 X -. EXAMINED PER AUG-01, NRC GL $8-01, 10" PIPE TO PIPE N/A+ INTERGRANUIAR STRESS CORROSION CRACKING. 11 ,303,400/300 N/A (C0177022) 100070 CSA 001ALD PT LP-LIM-001V3 R1 X.-. (C0177022) 10" PIPE SEAM B-J UT.45S W LIM-102VO RO X.-. 11 .303,400/300 39.12 - 200000 CSA 001ALU PT LP-LIM-001V3 R1 X.-. (C0177022) 10' PIPE SEAM B.J UT-455 W-LIM-102VD R0 X--- ! 11 .303,400/300 B9.12 100090 CSA 001L5 PT LP-LIM-001V3 R1 X .- (C0177022) 10" PIPE SEAM B-J W.45S UT-LIM-102VD R0 X--- 11 .303.400/300' B9.12 I I
- 200100 CSA 001LU PT LP-LIM-001V3 R1 X.-- (C0177022) 12*X10' REDUCER SEAM B.J W -455 UT-LIM-102VO R0 X--.
11 .303,400/300 89.12 ( l
DATE: 08/01/98 LIMERICK CENERATING STRTION UNIT 1 PAGL 3 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OtfrAGE (98RF) CLASS 1 CAUEP STAIUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUWIARY EXAMINATION Aff.A CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEUURE CRMR REMARKS CS (REF. DWG. No, 04-01) 100110 CSA 002 PT LP-LIM-001V3 R1 X--- (C0177022) 12* ELBOW TO 12"X10' REDUCER B-J+ UT-455 (TT. LIM-102VD R0 X--- 11 .303,400/300 89.11 200111 CSA 002 UT-45S UT-LIM-102VD R0 X-.- EXAMINED PER AUG-01, NRC GL 88-01, 12' ELBOW TO 12*X10' REDUCER N/A+ IlrIERGRANULAR ST1tESS CORROSION CRACKING. 11 ,303,400/300 N/A (C0177022) 100130 CSA 002LD PT LP LIM-001V3 R1 X--* (C0177022) 10*X12" REDUCER SEAM B-J ITT-4 5S Ift-LIM-102VO R0 X-.- 11 303,400/300 B9.12 100130 CSA 002LU MAX PT LP-LIM-001V3 R1 X -- (C0177022) 12' ELBOW SEAM, MAXIMUM B-J UT-455 UT-LIM-102VD RO X--- 11 .303,400/300 89.12 100140 CSA 002LU MIN PT LP. LIM-001V3 R1 X--- (C0177022) 12" ELBOW SEAM, MINIMUM B-J UT 45S UT-LIM-102VD R0 X--- 11 .303,400/300 B9.12 100150 CSA 003 PT LP-LIM-001V3 R1 X--- (C0177022) 12" PIPE TO ELBOW B-J UT.45S UT-LIM-102VD R0 X-.- 11 4303,400/305 89.11 ?,00160 CSA 003LD MAX PT LP-LIM-001V3 R1 X-.. (C0177022) 12" ELBOW SEAM, MAXIMUM B-J UT-455 UT-LIM-102VD RD X--- 11 ,303,400/305 B9,12 200170 CSA 003LD MIN PT LP-LIM-001V3 R1 X--- (C0177022) 12" ELBOW SEAM, MINIMUM B-J UT-45S UT-LIM-102VD R0 X-.- 11 ,303,400/30$ 29,12
DATE: 08/01/C4 LIMERICK CENERATING 6TATION UNIT 1 PAGE: 3 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTA05 (98RF) CIASS 1 CAUEP STATUS COMPONENTS NR R ASME OECE SEC. XI RCEP SLM1ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS CS (PEF. DWG NO, 04-01) 100180 CSA 003LU PT LP-LIM-001V3 R1 X-. . (C0177022) 13' PIPE SEAM B-J W-45S UT. LIM.102VD R0 X-.- 11 .303.400/305 B9.12 100350 CSA 00BA PT LP LIM-001V3 R1 X--- (C0176 807) 13' PIPE TO ELBOW, BIMETALLIC B-F UT-455 UT-LIM-102VD RD X-.. 11 ,295,400/317 B5.130 UT-45S W-LIM-102VO R0 X... 500360 CSA 008ALDMAX PT LP-LIM-001V3 R1 X-.. (C0176807) 13' ELBOW SEAM, MAXIMUM B-J UT.45S UT-LIM 102VO RO X-.. 11 ,295.400/317 B9.12 100370 CSA 008ALDMIN PT LP-LIM-001V3 R1 X--. (C01768 07) 12" ELBOW SEAM, MINIMUM B-J UT 45S UT-LIM-102VD R0 X-.. 11 .295,400/317 B9.12 , 100450 CSA 013 PT LP-LIM-001V3 R1 X-.. (C0176809) 12' PIPE TO PIPE, BIMETALLIC B-F UT-455 UT. LIM-102VO R0 X--. 11 ,295,400/352 B5.130 UT-45S UT-LIM 102VD R0 K.-- CS (REF. DWG, NO. 04-101) 100550 DIA-111-H005 VT-3 MAG-CG-407 R5 X-a - (C0176809) MECHANICAL SNUBBER F-A+ 11 .295,400 F1.10 HPCI (P.EF DWG. NO 02-011 , 103220 RP 013 MT MT-LIM-001VI R2 X--. (C0176557) 10' PIPE TO TEE B-J+ W-4 5S UT LIM-106Y0 R0 -
-X-15 ,237,400/220 B9.11 t
l o______..________.-._-
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PACE: 4 REVESION: 1 INSERVICE INSPECTIOI SWMARY REPORT SECOND INTERVAL, FIRST PER.100, FIRST CUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS l NR R 1 ASME OEGE ' SEC. XI RCEP SIDNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS HPCI (REF. DtfG NO. 02-01) , 103221 HP 013 UT.45S UT-LIM 106VD R0 .-X. EXAMINED PER AUG.05, NRC TECHNICAL 10' PIPE TO TEE N/A+ POSITION MEB 3 1 (NUREG-0800, 'NO BREAX' 15 ,237,400/220 N/A BOUNDARIES), (C0176557) i j J
'103330. HP 013A MT MI-LIM.001V1 R2 X--- (C0176557) 10' TEE TO BLIND FLANGE B-J+ UT-45S UT-LIM-106VD RO -.X-15 ,237,400/213 89.11 103331 HP 011A UT.45S 17T-LIM-106VD R0 .-X- EXAMINED PER AL*",-05, NRC TECHNICAL 10' TEE TO BLIND FLANGE- N/A+ POSITION MEB 3 1 (NUREG.0800, "No BREAK' 15 ,237,400/213 N/A BOUNDARIES)+ -(C0176557) 103240 HP 014 Mr MT-LIM.001V1 R2 X*.- (C0176557)
TEE TO PIPE B.J+ UT 45S UT. LIM-106VO R0 X..- 15 .2.37,400/215 B9.11 103341 HP 014 tTT-45S ttT-LIM.106VD R0 X- .- EXAMINED PER AUG-05, NRC TECHNICAL TEE TO PIPE N/A+ POSITION MEB 3-1 (NUREG-0800, "No BREAK' 15 ,237,400/215 N/A. BOUNDARIES). (C0176557) MS (REF. DWG. NO. 03-101) i I
'103930 APE-1MS.H003 VT-3 MAG-CG.407 R$ X-.- (C0176557) '
MECHANICAL SNUBBER F-A+ 12 ,277,400 T1,10 l MS (REF. DWG. NO. 03-02) I 104050 MBA 004 MT MT LIM-001V1 R2 X -- . (C0176926) 26
- PIPE TO 26'X8' SWEEPOLET B.J ITT-45S UT-LIM-106VD R0 X ..
12 .286,400/70 B9.31 1 l l l I __ _ - _ - - _ - __ O
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE 5 l REVISICO 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONCNTS NR R ASME OEGE SEC, XI RCEP i SUlHARY EXAMINATION AREA CATGY EXAM EOOO
- NUMBER IDENTIFICATION ITEM NO METHOO PROCEDURE CRMR REMARKS l
MS (PEF. DWG. NO. 03-02) l104080 MSA 007 W MT. LIM 001V1 R2 X..- (C0176926) 25" PIPE TO 26*X8' SWEEPOLET B-J UT.455 f1T-LIM-106VD R0 X..- 12 ,288,400/74 B9.31 i104130 MSA 012 MT ffI. LIM-001V1 R2 X-.. (C0176665) 26* PIPE TO 26*X8" SWEEPOLET B-J W.45$ UT-LIM-106VO R0 X... 12 .277,400/70 B9,31 i104140 MSA 013 M MT. LIM 001V1 R2 X-.. (C0176665) 26'X8" SWEEPOLET TO PIPE B-J UT-45S UT-LIM-106VO R0 X..- 12 ,277,400/69 B9.11 i104150 MSA 014 MT MT. LIM 001V1 R2 X-+. (C0176665) 88 PIPE TO FLANGE B-J UT-45S UT. LIM-106VD R0 ..X. 12 .277,400/68 89.11 !104160 MSA 015 MT Mr. LIM.001V1 R2 X... (C0176665) 26' PIPE TO 26'X8" SWEEPOLET B.J UT-45S UT. LIM 106V0 R0 X... 1# 12 ,277,400/74 59.31
- 104170 MSA 016 MT ll MT. LIM-001VI R2 X-.. (C0176665) !
26'X8" SWEEPOLET TO PIPE B-J UT.45S UT LIM-106VO R0 X... l 12 ,277,400/75 B9.11 l '104180 MSA 017 MT MT-LIM-001V1 R2 X--- (C0176665) I 3" PIPE TO FLANGE BJ UT-45S UT. LIM-106VO R0 X-.. ! 12 .277,400/76 B9.11 l i MS (REF. DWG. NO. 03 01) 104220 MSA 020 MT MT-LIM-001V1 R2 X-- - (C0176632) ; 26' PIPE (FE IN051) TO ELBOW B-J+ UT-458 UT-LIM.106VO R0 X-.. ' 12 ,253,400/11 89.11 l 1 I l J
i l DATE: 08/01/98 LIMERICK CENERATING STATION UNIT 1 PAGE: 6 REVISZON: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CADEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP St9 NARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION . TEM NO METHOD PROCEDURE CRMR REMARKS l l MS (RFP DWG NO. 03-011 104221 MSA 020 UT-45S W-LIM-106VO R0 X- -- EXAMINED PER AUG-05, NRC TECHNICAL 26" PIPE (FE IN051) TO ELBOW N/A+ POSITION MEB 3-1 (NUREG-0800, 'No BREAK" 12 .253,400/11 N/A BOUNDARIES). (C0176632) 104330 MSA 021 MT MT-LIM-001V1 R2 X+ -- (C0176632) 26" ELBOW TO VALVE B-J+ UT-45S UT-LIM-106VO R0 X. -- HV-41-1F022A B9.11 12 ,253,400/08 i 104331 MSA 021 UI-45S 17T-LIM-106VO R0 X--. EXAMINED PER AUG-05, NRC TECHNICAL 26" EL80W TO VALVE N/A+ POSITION MEB 3-1 (NUREG-0800, "NO BREAK
- HV-41-1F022A N/A BOUNDARIES). (C0176632) 12 ,253,400/08 104340 MSA 022 MT MT. LIM-001V1 R2 X--- (C0176632) 26' VALVE HV 41-1F022A TO B-J+ UT-45S UT-LIM-106VO RD X- --
FLUED HEAD (X 7A) B9.11 12 ,253,400/07 104341 MSA 022 UT-45S UT-LIM-106V0 R0 X. -- EXAMINED PER AUG-05, NRC TECHNICAL 26" VALVE HV-41-1F022A TO N/A+ POSITION MEB 3 1 (NUREG-0800, 'NO BREAK
- FLUED HEAD (X+7A) N/A BOUNDARIES). (C0176632) 12 ,253,400/07 i
1 l I i 104250 MSA 023R. Mr KT-LIM-001V1 R2 X-.. (C0177094) j 26' FLUED HEAD (X-7A) TO VALVE B-J+ Ur-45S UT-LIM-106VO R0 X--- HV-41-1F071A B9.11 12 ,253,407 l I 10G351 MSA 023R UT-45S UT-LIM-106VO R0 X- .- EXAMINED PER AUG-05, NRC TECHNICAL 26* FLUED READ (X-7A) TO VALVE N/A+ POSITION MEB 3 1 (NUREG-0800, 'NO BREAX" HV-41-1F028A N/A BOUNDARIES). (C0177094) 12 ,253,407
l DATE: 08/01/38 1 LIMERICK GENERATING STATION UNIT 1 PAGE 7 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT 1 SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) l l CLASS 1 CAUEP STATUS COMPONENTS i NR R ASME OEGE SEC, XI RCEP l SGNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l
........................................ )
MS (REF. DWG. No. 03-101) ' l l 104260 STG-1MS-H025 VT-3 MAG-CG-407 R5 X- -- (C0176632) [ RIGID RESTRAINT F-A I 12 ,253,400 F1.10 l RCIC f REF. DWG. NO. 06-01) I ' l 106810 RC 012 PT LP-LIM-001V3 R1 X--- (C0176624) 4" PIPE TO FE IN016, B F+ UT-4LS UT-LIM-102VO R0 X--- BIMETALLIC B5.130 UT-45S UT-LIM-102VO R0 l X--- l 16 ,253,400/118 101811 RC 012 UT-45S W-LIM 102VD RO X--- EXAMINEC PER AUG-01, NRC GL 88-01, 4" PIPE TO FE IN016, N/A+ UT-45S UT-LIM-102VO R0 X--- INTERGRANULAR STRESS CORROSION CRACKING. s l BIMETALLIC N/A l (C0176624) 16 ,253,400/118 ' 106820 RC 013 PT LP-LIM-001V3 R1 X--- (C0176624) 4' FE IN016 TO PIPE, B-F+ UT-455 UT-LIM 102VO RO X--- BIMETALLIC 85.130 UT-455 UT-LIM-102V0 RO X--- l 16 ,253,400/118 l106821 RC 013 W-45S W-LIM-102VO R0 X- -- EXAMINED PER AUG-01, NRC GL 68-01, ' l 4' FE IN016 TO PIPE, N/A+ UT-45S UT-LIM-102VD R0 X--- INTERGRANULAR STRESS CORROSION CRACKING. BIMETALLIC N/A (C0176624) I 16 ,253,400/118 RR (REF. DWO. NO 07-01) 109140 RRA 036 PT LP-LIM-001V3 R1 X--- (C0176676) 28'X12* REDUCER TO 12" PIPE B-J+ UT-45S W -LIM-102VO RO X--- 15 ,253,400/270 B9.11 109141 RRA 036 W-4 5S W LIM-102VO R0 X--- EXAMINED PER AUG-01, NRC GL 88-01, 28'X12' REDUCER TO 12' PIPE N/A+ INTERGRANULAR STRESS CORROSION CRACKING. 15 .253,400/270 N/A (C0176676) t.
DATE: 08/01/98' LIMERICK GENERAT1"3 STATION UNIT 1 PAGE: 8 l REVISION: 1 -INSERVICE INSPECTION St.9 NARY REPORT ! SECOND IWrERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STAWS COMPONENTS l l NR R ' ASME OEGE SEC. II RCEP Ct.DNARY EXAMINATION AREA CATGY EXAM EOOO
-NUMBER IDENTIFICATION . ITEM NO METHOD PROCEDURE CRMR REMARKS RR fREF DWG. NO. 07-01)
I 100150 RRA 036LD PT LP. LIM-001V3 R1 X- -. (C0176676) 12* PIPE SEAM B-J W.45S W. LIM-102VD RO X .. 15 ,253,400/270 89.12 l 109890 RRA 042 PT LP-LIM.001V3 R1 X*-. (C0176685) 12' PIPE TO ELBOW B-J+ W-4 5S OT-LIM-102VD R0 X- --
, 11 ,277,400/300 B9.11 )
l 1 109291 RRA 042 UT-455 W LIM-102VO RO X--- EXAMINED PER AUG-01, NRC GL 88 01, 12" PIPE TO ELBOW N/A+ 'INTERGRANULAR STRESS CORROSION CRACKING. 11 ,277,400/300 N/A (C0176685) l I 109300 RRA 042LD MAX PT LP-LIM-001V3 R1 X..- (C0176685) 12" ELBOW SEAM, MAXIMUM B.J ITT-45S W. LIM-102VO R0 X.-- 11 ,277,400/300 B9.12
- 109310 ARA 042LD MIN' PT LP. LIM-001V3 R1 X--- (C0176685) 12" ELBOW SEAM. MINIMUM B-J UT-45S UT. LIM-102V0 R0 X-..
11 ,277,400/300- B9.12 109330 RRA 042LU PT LP. LIM.001V3 R1 X-.. (C0176685) 12" PIPE SEAM B-J W-4 55 W. LIM-102VO R0 X---
'11 ,277,400/300 89.12 100330 RRA 043 PT LP-LIM 001V3 R1 X--- (C0176685) i 12* ELBOW TO PIPE B.J+ UT.45S W-LIM-102VO R0 X-..
11 ,277,400/300 B9.11 .- 109331 RNA 043 UT-45S UT-LIM 102VD R0 X--- EXAMINED PER AUG-01, NRC GL 88 01, 12' ELBOW TO PIPE N/A+ INTERORANULAR STRESS CORROSION CRACKING. 11 ,277,400/300 N/A (C0176685) l
1 DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGE: S
' REVISIC'Ja 1 INSERVICE INSPECTION SIM4ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST CITTAGE (98RF)
CIASS 1 CADEP STATUS COMrONENTS NR R ASME OEGE ' SEC. XI RCEP SIM1ARY EXAMINATION AREA CATGY EXAM EOOO 1 NUMBER IDENTIFICATION . ITEM NO METHOD PROCEDURE CRMR
- 1 REMARXS I 1- ........................................
l RR ' RET. DetG , NO, 07-01) l ( 109340. RRA 043LD PT LP. LIM-001V3 R1 X-.. (C0176685) I 12' PIPE SEAM B-J UT-45S .UT. LIM-102VD R0 X...
- 11 ,277,400/300 89.12 t
109350 RRA 043LU MAX PT LP. LIM-001V3 R1 X--- f (C0176685) l ' 12' ELBoti SEAM, MAXIMUM B-J UT-45S (TT-LIM-102VO R0 X... 11 ,277,400/300 99.12 109360 RRA 043LU MIN PT LP. LIM 001V3 R1 X-.. (C0176685) 12* ELBOW SEAM, MINIMUM B-J' U*.455 UT-LIM-102VD R0 X- . 11 ,277,400/300 89.12 i RR (REF. DWG. NO 01-02) ' l I110280 RAB 007A PT LP-LIM-001V3 R1 X... (C0176566) 288 PIPE 70 2* N0ZZLE B.J 16 ,237,400/146 B9.32 i '110370 RRB 013 PT LP-LIM-001V3 R1' X-.. (C0176566) 28' PLMP 1BP201 TO PIPE B.J+ UT.458 UT. LIM.102VD R0 X... I 16 ,237,400/125 B9.11 UT-60RL UT. LIM-102VO R0 X.-- 110371.'RRB 013 UT-455 tFT-LIM.102VD R0 X*.. EXAMINED PER AUG 0", NRC OL 88-01, 28" PCMP 1BP201 TU PIPE N/A+ 17T-60RL UT-LIM 102VD R0 X... INTERGRANULAR STRESS CORROSION LRACXING. i 16 ,237,400/125 N/A (C0176566) l $10300 RRB 013LD PT LP-LIM-001V3 R1 X... (C0176566) 1 288 PIPE SEAM B-J (TT.45S UT-LIM-102VO R0 K...
'16 .237,400/125 B9.12 l
l B10390 ' RR3 016 PT LP-LIM-001V3 R1 X... (C0176566) 288 PIPE TO VALVE HV-43 1F031B B-J+ UI-455 UT-LIM-102VD R0 X... 16 ,237,400/118 89.11 UT-60RL UT-LIM-102VD R0 X-.. l
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 10 RE'f!SION: 1 INSERVICE INSPECTION SIM4ARY REPORT SECOND IlffERVAL, FIRST PERIOD, FIRST OUTAGE (9sRF) CIASS 1 CAUEP STATUS COMPONENTS l NR R ME OEGE SEC. XI RCEP SIM1ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RR fRFF. DWG. NO. 07-02) 110391 RRB 016 (7f-4 5S UT-LIM-102VO R0 X--- EXAMINED PER AUG-01, NRC GL 88-01, 28" PIPE TO VALVE HV-43-1F0319 N/A+ Ifr-60RL UT-LIM-102V0 R0 X... INTERGRANULAR STRESS CORROSION CRACKING. 16 ,237,400/118 N/A (C0176566)
&&0400 RRB 016LU PT LP-LIM-001V3 R1 X..- (C0176566) 28' PIPE SEAM B-J 07 45S UT-LIM-102VO R0 X..-
16 ,237,406/118 B9.12 PP fREF. DWG. NO. XI-1P-201) 511480 VRR-1RP-H004 VT-3 MAG-CG-407 R5 X..- (C0176566) MECHANICAL SNUBBER PUMP F-A+ SUPPORT F1.40 16 ,237,400 511400 VRR 1RP-H005 VT-3 MAG-CG-407 R5 X.-. (C0176566) MECHANICAL SNUBSER . PUMP F-A+ SUPPORT F1. 4 0 16 ,237,400 111500 VRR-1RP-H006 VT-3 MAG-CG-407 R$ X... (C0176566) MECHANICAL SNUBBER . PUMP F-A+ SUPPORT F1.40 16 ,237,400/130 111370 */RR 1RS-HHE5 VT.3 MAG-CG-407 R$ X-.. (C0176566) VERTICAL PUMP SUPPORT F.A 16 ,237,400 P 111580 VRR 1RS-HHB6 VT-3 MAG-CG-407 R$ X.-- (C0176566) VERTICAL PUMP SUPPORT F-A 16 ,237,400 F1.40 = _ _ - _ _ - _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
DATE: 08/01/98 LIMERICK GENERATING STATION CIT 1 PAGE: 11 ret'ISION: 1 INSERVICE INSPECTICU StM4ARY REPORT SECOND INTERVAL,' FIRST PERIOD, FIRST OCTTAGE (90RF) CIASS 1 CAUEP STATUS COMPONENTS Nk R ASME OEOE
- SEC, XI RCEP
,SIMIARY EXAP8INATION AREA CATGY EXAM , EOOO j NtBGER IDEN!!FICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l: RR iREF DWG. NO. Xf-1P-201) I . 331090- tfRR-1RS-HHB7 VT-3 MAG-CG-407 R5 X..- (CO276566)-
. VERTICAL PLMP SUPPORT F-A 16 ,237,400 F1.40
'815660' VRR 1RP-H004 (IA)' PT LP-LIM-001V3 R1 X. .. (CC.76566) l PUMP SUPPORT, LtK3 B-K-1 1 16 ,237,400/135 - B10.20 l111670 t'RR.1RP-H005 IIAl PT LP-LIM-001V3 R1 X=.. (C0176566) PLMP SUPPORT, LUG B-K-1 16 ,237,400/135 810.20 [ l$11680 t'RR.1RP-H006 (IA)- PT LP-LIM-001V3 R1 X .. (C0176566) PLMP SUPPORT, LUG B-K 1
-16 ,237,400/135 B10.20 l
l
- 111730 t'RR-1RS-HHB6 (IA) PT LP-LIM-001V3 R1- X... (C0176566)
' PCMP SUPPORT, ^ LUG B-K-1 16 ,237,400/135 810.20 RNCU (REF. DNC. KO. 08-104) I
{
- 813070 DCA-101 E4-H001- VT-3 MAG-CG-4 07 R$ X..- (C0176598)
J MECHANICAL SNUBBER F-A+
.15 ,244,400/240 F1.10 i I
113000 DCA-101-E4-H002 VT-3 MAG-CG-407 R5 X-.. (C0176598) MECHANICAL SNUBBLA F.A+
.50 ,237,400/240 F1.10 l l
l RNCU TREF. DWG. NO. 08-04)
$14310 RW 314 PT LP-LIM-001V3 R1 X-.. (C0176598)
.2" PIPE TO ELBOW B-J
~
15 ,237,400/207 .89.21 1
DATES 08/01/9Q LZMERICK GENERATING STATION UNIT 1 PACE: 12 REVISION: 1 INSERVICE INSPECTION S'.1tNARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE 198RF) CIASS 1 CAUEP STATUS COMPONENTS NR R I' ASME OEGE SEC.' XI RCEP SIDNARY EXAMINATION AREA CATGY EXAM EOOO
' NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RWCU (REF. DWC. NO. 08 04) 114230 RW 116 PT LP-LIM-001V3 R1 X .. (C017659C) 2' PIPE TO VALVE 1F050 B-J 15 ,237,400/211 B9.21 114250 RW 118 PT LP-LIM-001V3 R1 .X-... (C017659?)
2* PIPE TO ELBOW B-J 15 ,237,400/218 89.21 114270 RW 120 PT LP. LIM-001v3 R1 X-.. (C0176598) 2"' PIPE TO 4*X2" WELDOLET B-J 15 ,237,400/216 89.21 RHR (REF. DWG. NO. M 1147G0 HV-51-1F0155-B VT-1 MAG.CG-407 RS x-.. (C0179392) 12' M.O. GLOBE VAL */E BOLTING B-G-2
.16 ,217,309 B7,70 s
RHR (REF. DWG. NO. 01-11) 115070 RN 007 PT LP. LIM-001V3 R1 X--- (C0176652) 20' PIPE TO VALVE HV-51 1F009 B-J ITT-453 ITT-LIM-102VO R0 X.-. 15 ,253,400/213 89.11 tTF-60RL ITI-LIM-102VO RC X.-. 115000. RH 007LU, PT LP-LIM-001V3 R1 X--. (C0176652)
'20' PIPE SEAM B-J ITT.4 5S UT-LIM-102v0 R0 X-..
15 ,253,400/213 E9.12
^115090. RM 008 PT LP-LIM-001V3 R1 X--- (C0176652) 20' VALVE HV 51-1F009 TO PIPE B-J UT-458 UT-LIM-102VO R0 X---
15 .253,400/213 89.11 UT.60RL UT-LIM-102VD R0 X...
. DATEt 08/01/98 LIMERICK GENERATING STATION UNIT 1 <
PAGE: 13 REVISION:- 1-INSERVICE INSPECTION StDNARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAOE (98RF) CLASS 1 CAUEP STATUS COMPONENTS I i-i t NR R ASME. OEGE SEC. XI , RCEP StDNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS
' RNR (REP. DWG NO. 01-101) l'
{113600 DCA-318-H002 VT-3 MAG-CG-407 R5 K... (C0176899) j MECHANICAL SNUBBER F.A+ l" 15 ,295,400/250 F1.10 (115610 DCA-318.H006- VT-3 MAG-CG-4 07 R5 X-.. (C0176899)
- VARIABLE SUPPORT F.A 15 ,295,400 F1.10 t 21E 'f a OLA-112-H020 VT-3 MAG-CG.4 07 R5 X-.. (C0176899)
- l. MECHANICAL SNUBBER F-A+
15 ,295.400/258 F1.10 i I,. 1
. RHR (REP. DMG. NO. 01-01) 115680 RNA 001 PT . LP-LIM-001V3 R1' X- -
(C0176899) 12'-ELBOW TO PIPE B-J+ ITT*4 55 UT-LIM-102VO R0 .X-.
..15 ,295.400/225 39.11 l115681 RHA 001 17T-453 UT-LIM-102VD R0 X.. . EXAMINED PER AUG 01, NRC CL 88-01, i 12* EIAOW TO PIPE. N/A+ INTERGRANULAR STRESS CORROSION CRACXING.
- r. 15 ,295,400/225 N/A (C0176899) 113720. RHA 001LD : PT LP-LIM-001V3 R1 X... (C0176899) 128 PIPE SEAM - B-J UT-45S UT-LIM-102VO R0 X ..
. 15 ,295,400/225- 89.12 l115730 RHA'001LU MAX PT LP LIM.001V3 R1 'X... (C0176899)
! 128~ EIAOW SEAM,. MAXIMUM B.J UT-45S.- UT-LIM-102VD RD X-- . 15 ,295.400/225 89,12 115740 RHA 001LU MIN PT LP-LIM 001V3 R1 X--. (C0176899) 12" ELBOW SEAM, MINIMtM B-J 'UT-455 UT-LIM-102VD R0 X--- 15 ,295,400/225 B9.12 ___-_-______-2__-_______
DATE: 08/01/98 LIMERICK GENERATING STATION VNIT 1 PAGE: 14 REV3SION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND ItrTERVAL, FIRST PERIOD, FIRST CUTACE (98RF) CLASS 1 CAUEP STATUS COMPONDITS NR R ASME OEGE SEC. XI RCEP StM4AR7 EXAMINATION AREA CAICY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDUPE CRMR REMARKS 3 (REF. DWG. NO. 01 01) 12,G700 RHA 002 PT LP. LIM-001V3 R1 X... (C0176899) 12" VALVE 51 1F065A TO ELBOW B-J+ UT.45S UT-LIM 102VO R0 X .. 15 ,295,400/227 B9.11 UT.60RL UT. LIM-102VD R0 X .. 115751 RHA 002 UT-455 UT. LIM-102VD R0 X. . EXAMINED FER AUG-01, NRC CL 88 01, 12" VALVE 51 1F065A TO ELBOW N/A+ UT-60RL UT. LIM-102VD R0 X.-. INTERGRANULAR STRESS CORROSION CRACKING. 15 ,295,400/227 N/A (C0176899) 115760 RHA 002LD MAX PT LP. LIM-001V3 R1 X--. (C0176899) 12" ELBCW SEAM, MAXIMUM B.J UT.45S UT. LIM 102VO R0 X... 15 ,295,400/227 B9.12 115770 RHA 002LD MIN PT LP-LIM-001V3 R1 X--. (C0176899) 12* ELBOW SEAM, MINIMUM B-J UT-45S UT-LIM-102V0 R0 X... 15 ,295.400/227 B9.12 115780 RHA 003 PT LP. LIM.001V3 R1 X .. (C0176899) 12" PIPE TO VALVE 51-1F065A B.J UT-45S M. LIM-102VO R0 X-.. 15 ,295,400/233 89.11 UT.60RL UT. LIM 102VC R0 X-.. 115790 RNA 003LU PT LP. LIM-001V3 R1 X... (C0176899) 1.2' PIPE SEAM B-J W-45S UT-LIM-102V0 R0 X.-. 15 .295,400/233 B9.12 119800 RHA 004 PT LP. LIM-001V3 R1 X-.. (C0176899) 12" ELBOW TO PIPE B-J UT.4 55 UT. LIM-102VC R0 X -. 15 ,295,400/234 B9.11 115810 RKA 004LD PT LP-LIM.001V3 R1 X.-. (C0176899) 12' PIPE SEAM B.J UT.45S UT. LIM-102VC R0 X... 15 ,295,400/234 B9.12
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 15 RFf!SION: 1 INSERVICE INSPECTION S1991ARY REPORT j SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STAIUS COMPONENTS NR R ASME OEGE SEC, XI RCCP SID91ARY EXAMINATION AREA CATOY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS
........ .............................. ....... .......... ................ .... ........................................ (
l RHR (REF. DWG, NO. 01-01)
.315820 RHA 004LU MAX PT LP-LIM.001V3 R1 X. -
(C0176899) 12" ELBOW SEAM, MAXIMUM B-J UT-453 UT-LIM-102VO R0 J X... ! la ,295,'400/234 89.12 ' l l 315830 RHA 004LU MIN PT LP-LIM.001V3 R1 X--. (C0176899) 13" ELBOW SEAM, MINIMUM B-J UT-458 UT-LIM-102VO R0 X... ! I 15 .295.400/234 B9.12 i l ! I l I.315840 RHA 005 PT LP. LIM-001V3 R1 X..- (C0176899) 12' PIPE TO ELBOW B.J UT-455 UT-LIM-102VD R0 X.-. 1 15 ,295,400/237 89.11 I-I
-183850 RNA 005A PT LP-LIM-001V3 R1 X... (C0176899) 13' PIPE TO PIPE, BIMETALLIC B* UT-45S UT-LIM-102VD R0 X-..
15 ,295,400/237 B5.130 UT-60RL UT-LIM-102VO R0 X... 185860 RHA 005ALD PT LP-LIM-001V3 R1 X- - (C0176899) !' 13' PIPE SEAM B-J UT-45S UT. LIM 102VD R0 X... 15 ,295.400/237 B9.12 UT-60RL ITT-LIM-102VO R0 X... I i 1 115870 RHA 005LD MAX PT . LP-LIM 001V3 R1 X-.* (C0176899) 13' ELBOW SEAM, MAXIMUM B-J . UT 4 55 UTaLIM-102VD R0 X.-. 15 .295,400/237 I 89.12 I
\ $15880 RHA 005LD MIN PT LP-LIM-001V3 R1 X.-. (C0176899) 18' EIAOW SEAM, MINIMUM B-J UT-458 UT. LIM-102VD R0 X... l 15 ,295,400/237 89.12
( 115890 RHA 005LU PT - LP-LIM-001V3 R1 X .. (C0176899) la PIPE SEAM B-J UT.45S UT. LIM-102VD R0 X .- 15 ,295.400/237 89.12 i i (- l
, _ _ _ _ _ , _ , _ _ _ _ . _ - _ . . - _ _ _ _ _ _ _ _ _ _ _ _ - - - - - _ - . . - . _ - . - - - " - - - - - - - - - ---- - - - - - - - - ^ ^ ^ - - - - " ' ' ' - " - ' ' - " ' - ' " - ' - " ' - - ' - ' ' - " - - - -- - ^ - - ' - - - - - - - - - ' ' - " - '- ' '
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 - PAGE: 16 REVISION: 1 INSERVICE INSPECTION SUPNARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CACEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXN4 EOOO NUMBER IDENT!'ICATION- ITEM NO METHOD PROCEDURE CRMR REMARKS {dt (REF. DWG. NO. 01 1111 110110 DCA-105-H012 VT-3 MAG-CG-407 R5 x. - (C0176652) MECHANICAL SNUBBER F.A+ 15 ,253,400/215 F1.10 118120 DCA-105.H013 VT-3 MAG-CG-4 07 R5 X... (C0176652) MECHANICAL SNUBBER F-A+ 15 .253,400/220 F1.10 RHR rREF. DWG. NO. 01-04) 818880 PHV-51 1F015B VT 3 MAG-CG-407 R5 .X-. EXM41 NATION PERFORMED PER NCR 92-00114 12* GLOBE VALVE INTERNAL B-M-2 AND REVEALED NO DISCERNABL5 CHANGE FROM SURFACES B12.50 PREVIOUSLY RECORDED INDICATIONS. 16 ,217,309-CRD (REF. DWG. NO. 09-101) 337710 EBB.142.SH.E16 VT-3 MAG-CG-407 R5 %--- (C0177620) RIGID RESTRAINT F-A . 12',253,402 F1.20 CRD (REF. DWG. NO. 09-01) 337760 RDA 002 MT MAG-CG-403 R6 X... (C0177620) 8' PIPE TO 8' TEE C-F-2 UT-455 UT-LIM-102VD R0 ..X-12 ,253,402 C5.51 237770 RDA 003 MT MAG-CG-403 R6 %... (C0177620) 8" TEE TO FLANGE C.F 2 UT-OL UT-LIM-102V0 R0 .X.- 12 ,253.402 C5.51 (IT-455 UT LIM-102VD R0 .XX. CS (REF. DWG NO. 04-02)
.228760' CSA 018 PfT Pfr. LIM-001V1 R2 X... (C0177648) 12' VALVE HV-1F004A TO ELBOW C.F-2 UT.453 tTT. LIM-106VO R0 X-..
11 .295,523 C5.51 L__________-______-___---_-___
l i DATE: 08/01/98 LIMERICK GENERATIT4 STATION UNIT 1 PAGEs 17 REVISIOh 1 INSERVICE INSPECTION
SUMMARY
REPORT f SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) t CLASS 2 CAUEP STATUS COMPONENTS ( NR R i ME OEGE SEC. XI l RCEP l SIM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l CS fREF. DWC. NO. 04-02) ' 228760 CSA 020 MT MT-LIM-001V1 R2 X--- (C0177648) 14" FLANGE (FO ID002A) TO C-F-2 UT-45S UT-LIM-106VO R0 X--- 14*X12* REDUCER C5.51 11 ,295,523 l I CS fREF. DWG. NO. 04-06) i ' 230670 CSB 037 l Mr MAG-CG 403 R6 X--- (C0177655) I?" ELBOW TO PIPE j C-F-2 UT-45S UT-LIM-102VO R0 X--- 1 l 12 ,177,114 C5.51
- 230700 CSB 039 MT MAG-CG-403 R6 X--- (C0177655) 14*X14*X12* TEE TO 14*X12* C-F-2 UT-45S UT-LIM-102VO RO --X.
REDUCER C5.51 12 ,177,114 I l CS fREF. DWG. NO. 04 OH 230890 CSB 058R MT MAG-CG-4 03 R6 X--- ! (C0177659) 16*K16*X14* TEE TO 14* ELBOW C-F-2 UT-458 UT-LIM-102VD R0 .-X-l l 12 ,177,117 C5.51 l 1 a C3 (REF. DWG. NO, 04-1061 1 l 231710 GBB-112-H008 VT-3 MAG-CG-407 R$ X--- (C0177655) RIGID RESTRAINT F-A 12 ,177,114 F1.20 231930 GBB-112-H053 VT-3 MAG-CG-407 R5 X.-- (C0177655) RIGID RESTRAINT F-A 12 ,177,114 F1.20 CS (REF. CWG. NO. 04-107) 232140 HBB-120-H032 VT-3 MAG-CG-407 R$ X -. (C0177659) VARIABLE SUPP(,rtT F-A 12 ,177,117 F1.20
DATE: 08/01/98 LIMERICK GENERATIC3 STATION UNIT 1 PAGEr 18 REVISION: 1 INSERVICE INSPECTION SthtfARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 2 CAUEP STATUS CON M E!frS I l l NR R ASME OEGE SEC. XI RCEP StM4ARY EXAMINATION AREA CATGY EXAM EOOO frJMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS FW (REP. OWG NO. 05 02) 333440 FWA 044 MT HT. LIM-001V1 R2 X-- - (C0177142) 8' PIPE TO VEVE 1058 C-r-2+ UT-45S UT-LIM-106VO RO X-. . 12 ,279,518 C5,51 l 333441 FWA 044 ITf-4 5 S 177.L1M 106VO R0 X--- EXAMINED PER AUG-05, NRC TECHNICAL 8' PIPE TO VEVE 1058 N/A+ POSITION MEB 3-1 (NUREG.0800, 'NO BREAK' 12 ,279,518 N/A BC')NDARIES). (C0177142) 233450 FWA 045 MT MT-LIM-001V1 R2 X- - - (C0177142) 8' VEVE 1058 70 20 DEC ELBOW C-F-2+ UT-OL UT. LIM-106VO R0 X- - - 12 .279,518 C5.51 (7t-45S UT LIM-106VO R0 X- - - 333451 FWA 045 Ifr-CL UT-LIM-106VD R0 X- -- EXAMINED PER AUG-05, NRC TECHNICAL 8" VALVE 1058 TO 20 DEG ELBOW N/A+ UT-45S ITT-LIM-106VO R0 X--- POSITION MEB 3-1 (NUREG-0800, 'No BREAK' 12 ,279,518 N/A BOUNDARIES). (C0177142) 333460 FWA 045A MT MT-LIM-001V1 R2 X- - - (C0177142) 8' 20 DEC ELBOW TO PIPE C-F-2+ 17T- O L UT. LIM-106V0 R0 X. . - 12 ,279,518 C5.51 UT-45S UT-LIM-106VD R0 . .X. 333461 FWA 045A UT-OL UT-LIM-106VO R0 X-- - EXAMINED PER AUG-05, NRC TECHNICAL 8' 20 CEG ELBOW TO PIPE N/A+ UT-45S ITI-LIM-106VD R0 .-X- POSITION MEB 3-1 (NUREG-0800, "NO BREAK
- 12 ,279,518 N/A BOUNDARIES) (C0177142) 333470 FWA 046R Mr MT-LIM-001V1 R2 X.-- (C0177142) 8' PIPE TO ELBOW C-F-2+ (7T-4 5S ITI LIM-106VD R0 -.X.
12 ,279,518 C5.51 233471 FWA 046R UT 45S ("I-LIM-106VO RC X--- EXAMINED PER AUG-05, NRC TECHNICAL 8' PIPE TO ELBOW N/A+ POSITION MEB 3-1 (NUREG-0800, 'NO BREAK" 12 ,279,518 N/A BOUNDARIES). (C0177142)
i I
'DATEt 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGEs 19 REVISIC3 1 INSERVICE INSPECTION SIM %RY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST CWAGE (98RF) j CLASS 2 CAUEP STATUS COMPONE!rts NR R '
ASME- OEGE SEC. XI RCEP SIMERY EXAMINATION AREA CATGY EXAM EOOO NUMBER -IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS i i l Fw (REF. DWC. NO. 05-02) i 233480 FWA 047 Pfr Pfr-LIM-001V1 R2 X.-. ' (C0177142) l' 8' ELBOW TO PIPE C F-2+ ITT-45S (IT-LIM-106VD R0 X... I' '12 ,279,518 C5.51 J l 1
'233482 FWA 047 UT 45S UT-LIM-106VD R0 X-.. EXAMINED PER AUG-05, NRC TECHNICAL
)
88 ELBOW TO PIPE N/A+ POSITION MEB 3-1 (NUREG-0800, 'NO BREAK
- 12 ,279,518 N/A BOUNDARIES). (C0177142) '
l
.. i MPCI (REF. DWG. NO. 02 101Al 1 i
233860 EIB-108.H022 VT-3 MAG-CG.407 R$ X... (C0177699) VARIABLE SUPPORT F-A
-15 .217,309 F1.20 i 233870- EBB-108-H023' VT 3 MAG-CG-407 R5 %... (C01776991 i
MECHANICAL SNUBBER .F.A+ l 15 ,217,109 F1.20 t i
'HPCI (REF. DWG. No. 02-102) ; 234020 EBB-108 H039 VT-3 MAG.CG-407 R5 %-.. (C01773581 MECHANICAL SNUBBER F-A+
15 ,177,109- F1.20 j l HPCI (REF, DWC. NO. 02-103) 234550 -NBB-108-H006-- VT-3 MAG-CG-4 07 R5 X... (C0177716) RIGID RESTRAINT' F-A 15 ,177,109 F1,20 1 234560 MBB.108-H007 Vf-3 MAG-CO-4 07 R5 X. - (C0177716) RIGID RESTRAINT F-A 15 ,177,109 F1.20 1 i l'
.DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 30 REVISION: 1 INSERVICE INSPECTION SIM1ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) '
CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SIMIARY EXAMINATION AREA CATGnf EXAM EOOO NUMBER-IDENTIFICATION ITEM NO ME* HOD PROCEDURE CRMR REMARKS HPCT (REF. DWO. NO 02-103) 334G00 HBB-108-H013 VT-3 MAG-CG-4 07 R5 X--- (C0177716) RIGID RESTRAINT F-A t 15 ,177,109 F1.20 l. HPCI (REF. DWG. NO. 02-01A1 834330 HP 022 MT MT-LIM-001V1 R2 X--. (C0177685) 10' VALVE HV-1F003 TO 10*X12" C-F-2+ UT-455 UT-LIM 106VO R0 X... REDUCER C5.51 15 ,217,309_ 234631. HP 022 UT-45S UT LIM-106VO R0 X..- EXAMINED PER AtK3-05, NRC TECHNICAL 10' VALVE HV-1F003 TO 10*X12" N/A+ POSITION MEB 3 1 (NUREG-0800. "NO BREAK
- REDUCER N/A BOUNDARIES). (C0177685)
.15 ,217,309 336640 HP 023 MT NT-LIM-001V1 R2 X--- (C0177685) 10*X12* REDUCER TO 12' ELBOW C-F-2+ ITT 454S UT-LIM-106VO R0 X...
15 ,217,309 C5.51
.334641 HP 023 UT-45S UT-LIM-106VO R0 X-.. EXAMINED PER AUG-05, NRC TECHNICAL 10*X12" REDUCER TO 12" ELBOW N/A+ POSITICN MEB 3-1 (NUREG-0800, "No BREAK" 15 ,217,309 N/A BOUNDARIES). (C0177685) 334650 HP 024 . . MT MT-LIM-001V1 R2 X*.- (C0177685) 12" ELBOW TO PIPE C-F-2+ UT-458 (TI-LIM-106VD R0 X.-.
15 ,217,309 C5.51 334651 MP 024 UT-45S UT-LIM-106V0 R0 X- - EXAMINED PER AIR 3 05, NRC TECHNICAL 12' ELBOW TO PIPE N/A+ POSITION MES 3-1 (NUREG-0800, "NO BREAK" 15..,217,309 N/A BOUNDARIES). (C0177685) _L _ _ ___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . _ _ . . _ _ _ _ _ _ _ _ _ _ _ _ _ _ . . _ _ _ _ _ _ _ _ _ _ _ _ . _ ..___.l
l DATEi 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGE: 21 REVISIC34 1 INSERVICE INSPECTION StM1ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SIMtARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS
- HPCI (REF. DWC. NO, 02-02) !
l 235045 EBB.108-2 FW261 MT MAG-CG-403 R6 X... (C017735e) 12* TEE TO VALVE HV-1F001 C-F-2 UT 0L UT-LIM 106VD R0 X . . ~. 15 ,177,109 C5.51 UT-45S UT-LIM-106VO R0 ..X. l 233055 EBB-108-2 FW262 MT- MAG-CG-403 R6 X..- (C0177358) 12" VALVE HV.1F001 TO ELBOW C-F.2 UT-OL ITT-LIM-106VO R0 K... 15 ,177,109 C5.51, LTT.45S UT. LIM-106VO R0 ..X. I I HPCI (REP DWG. NO. 02-03) I 233090 HP 059R MT NT. LIM-001VI R2 X..- (C0177716) l 18' FLANGE TO 20' X 20' X '18". C F-2 17T 45S UT-LIM.106VD R0 ..X.
- TEE C5.51 15 ,177,109
'233110 HP 061' MT MT-LIM-001V1 R2 X--- (C01777161 20' PIPE TO CAP C-F-2 (TT-45S 17T-LIM-106VD R0 X...
15 ,177,109 C5,51 i HPC7 fREF. DWG. NO. 02-071
-236130 EP 157 MT NT-LIM-001V1 R2 X... (C0177740) t i
88 PIPE TO ELBOW C-F-2 17T 45S tTT. LIM-106VO R0 .-X. 12 ,279,518 C5.51 1 i l1 236140 HP 158 MT NT LIM 001V1 R2 X... (C0177740) 8' EIAOW TO PIPE C r-2 ITT-453 Ur-LIM-106VD R0 X... 12 ,279,518 C5,51 ! M.3 (REF. DWG. NO. 03 103)- [
,237960 EBB-103 H019 VT 3 MAG CG-407 R5 X... (C0177115)
RIGID RESTRAINT FA 12 .253,407 F1.20 l t______._. _ _-_ _ _ . --
DATE: 08/01/98 LIMERICK GENERATIC3 STATION UNIT 1 PAGE: 23 REVISION: 1 INSERVICE INSPECTION SIDHARY REPORT SECOND IFTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP StANARY EXAMINATION AREA CATGY EXM4 EOOO NUMBER IDElrTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS MS fREF. DWG. NO. 01-103) 337070 ' EBB-103-H020 VT-3 MAG-CG-407 R5 X- -- (C0177115) RIGID RESTRAINT F-A 12 ,253,407 F1.20 MS (REF. DWG. NO. 03-03) . 338000 MSA 024 Mr MT-LIM-001V1 R2 X-.. (C0177110) 26' VALVE HV-1F028A TO PIFE C-F-2+ UT-45S UT. LIM-106VD R0 X-.~ 12 ,253,407 C5.51 338001 MSA 024 UT-45$ UT-LIM-106V0 R0 X... EXAMINED PER AUG-05, NRC TECHNICAL 26' VALVE NV-1F028A TO PIPE N/A+ POSITION MEB 3-1 (NUREG 0800,' 'NO BREAK" 12 ,253,407 N/A' BOUNDARIES). (C0177110) 338010 MSA 025 MT MT-LIM-001V1 R2 X .- (C0177115) 26' PIPE TO ELBOW C-F.2+ UT-OL UT-LIM-106VD R0 X-.. 12 .253,407 C5.51 U7-45S UT LIM-106VO R0 X-. . 338011 MSA 025 UT OL UT-LIM-106VD R0 X .. EXAMINED PER AU3-05, NRE TECHNICAL 26' PIPE TO ELBOW N/A+ UT-45S UT-LIM-106VD R0 X-.. PO41 TION MES 3 1 (NUREG.0800, 'NO BREAK' 12 ,253.407 N/A BOUNDARIES). (C0177115) 338020 MSA 025LD MAX MT MT-LIM-001V1 R2 X... (C0177115) 26" ELBOW SEAM, MAXIMUM C F-2+ UT-OL UT-LIM-106V0 R0 X-.. 12 ,253,407 C5.52 Ur-458 UT-LIM-106V0 R0 X- - 338021 MSA 025LD MAX UT-OL UT-LIM-106VO R0 X- -~ EXAMINED PER AUG-05, NRC TECHNICAL 26' E!aOW SEAM, MAXIMUM N/A+ UT-455 UT-LIM-106VD R0 X--- POSITION MEB 3-1 (NUREG-0800, 'NO BREAK' 12 ,253,407 N/A BOUNDARIES). (C0177115) 338030 MSk 025LD MIN MT MT-LIM-001V1 R2 X--- (C0177115) 26" ELBOW SEAM, MINIMUM C-F 2+ UT-OL UT-LIM-106VD R0 X-.. 12 ,253,407 C5.52 UT-45S UT-LIM-106VD R0 X-.. 4
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 l PAGE: 23 l'REVISIO3: 1 INSERVICE INSPECTION SIM4ARY REPORT-I SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) l CLASS 2 CADEP STATUS COMPONENTS l NR R ASME OEGE SEC. XI RCEP lSt#91ARY EXAMINATION AREA CATGY EXAM l EOOO l NUMBER . IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS MS fREF. DWG. NO.'01-03) l !238031 MSA 025LD MIN UT.0L UT-LIM-106V0 R0 X-.. EXAMINED FER AUG-05, NRC TECHNICAL 26" ELBOW SEAM, MINIMUM N/A+ UT-45S UT LIM-106VD R0 X*. POSITION MEB 3 1 (NUREG-0800, "NO BREAX" l 12 ,253,407 N/A BOUNDARIES). (C0177115) l i238040 MSA 026 Mr MT-LIM-001V1 R2 X--. (C0177115) 26' ELBOW TO PIPE C-F-2+ UT-OL Ur-LIM-106VO R0 X... 12 ,253,407 C5.51 UT-45S UT-LIM-106VO R0 X-..
- 238041 MSA 026 ttT-OL UT-LIM-106V0 R0 X--. EXAMINED PER AUG-05, NRC TECHNICAL 26' ELBOW TO PIPE N/A+ UT-45S UT-LIM-106VO R0 X.-. POSITION MEB 3 1 (NUREG-0800, "NO BREAK" 12 ,253,407 N/A BOUNDARIES). (C0177115)
$38050 HSA 026LU HAX MT MT-LIM-001V1 R2 X--. (C01771151 26' ELBOW SEAM, MAXIMUM C-F-2+ UT 0L UT LIM-106VD R0 X .. 12 ,253,407 C5.52 UT-455 (TT-LIM-106VO R0 X... 838051 MSA 026LU MAX UT-OL UT-LIM-106VD R0 X... EXAMINED P3R AIR 3-05, NRC TECHNICAL 26' ELBOW SEAM, MAXIMUM N/A+ UT-45S UT-LIM-106VO R0 X- . POSITION MEB 3-1 (NUREG-0800, "NO BREAK" 12 .253,407 N/A BOUNDARIES), (C0177115) B38060' MSA 026LU MIN MT - MT LIM-001V1 R2 X.-. (C0177115) 26' ELBOW SEAM, MINIMUM C-F-2+ UT-OL UT-LIM-106VD R0 X... 12 ,253,407 C5.52 UT-45S UT-LIM-106VO R0 X-.. 838061 MSA 026LU MIN UT-OL UT-LIM-106VO RO X... EXAMINED PER AUG-05, NRC TECHNICAL 26' ELBOW SEAM, MINIMUM N/A+ UT-45S UT-LIM-106VO R0 X... POSITION MEB 3-1 (NUREG 0800, "No BREAK" 12 ,253,407 N/A BOUNDAAIES). (C0177115) RCIC (REF . DWG . NO. 06-107) EBB 109-N001 VT-3 MAG-CG-407 } f41780 R5 X... (C0177747)
' VARIABLE SUPPORT F-A 15 ,177,108- F1.20 E____________..___.___----_---.-- -- --
-- - - - - - - - - - - - ~ -
DATE: 08/01/98 LIME]ICK GENERAT!NG STATION UNIT 1 PACE: 34 RE'JISION: 1 INSERVICE INSPECTION SUPHARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OWAGE (98RF) CLASS 2 CAUEP STATUS COMPONENTS NR R l ASME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PCTC (RFF. DWG. NO. 06-103) 343130 EBB-126-H001 VT-3 MAG-CG-407 R$ X -- (C0177747) RIGID RESTRAINT F-A 15 ,177,108 F1.20 243280 EBB-135-H015 VT-3 MAG-CG-401 R5 X--- (C0177747) RIGID RESTRAINT F-A 15 .201,200 F1.20 RCIC (REF DWG. NO. 06-02) 343070 RC 048 MT MT-LIM-001V1 R2 X--. (C0177747) 6" PIPE TO TEE C F-2 W-4 5S W-LIM-106V0 R0 X.-. 15 ,177,108 C5,51 243990 RC 050 MT MT LIM-001V1 R2 X--- (C0177747) 6" VALVE HV-1F045 TO TEE C-F-2 W 458 W-LIM-106VO R0 X--- 15 ,177,108 C5.51 RCIC (REF. DWG. NO. 06-03) 243030 RC 053R MT MT-LIM-001V1 R2 X--- (C0177171) 6" PIPE TO 24" X 6" SWEEPOLET C-r-2 W-4 5 S UT-LIM-106VC R0 X -. 12 ,279,518 C5.51 243030 RC 054R MT MT-LIM-001V1 R2 X--- (C0177171) 6" ELBOW TO PIPE C-r-2 W-4 55 Ur-LIM-106VD RO -.X-12 ,279,518 C5.51 PHR fREF. DWG. NO. XI-1P-202) 344850 RHA-P E MT MAG-CG-403 R6 X--- (C0178042) ELBOW TO OUTLET READ WELD C-G 15 ,177,102 C6.10 .I l Y { l, 1
.1
DATE: 08/01/98 LIMERICX GENERATIM STATION UNIT 1 PAGE: H REVISION: 1 INSERVICE INSPECTION SIM4ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OtTTAGE (98RF) CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP StM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RHR (REF. DWG. NO XI-1P-202) 244970 RHB.P-B VT-1 MAG-CG-407 R$ X.. . ACCESS ACHIEVED THROUGH PUMP DISASSEMBLY INLET NOEELE TO CASING WELD C-G DURING 1RO71 ALTERNATIVELY PER RELIEF 16 ,117,103 C6.10 REQUEST 87, DUE TO RADIATION
~
'16 ,177,103 ENVIRONME2rT, A VISUAL EXAMINATION WAS PERFORMED IN LIEU CF SURFACE EXAMINATION. (ColBif86l 244980 RHB-P-C VT-1 MAC CG-407 R5 x... ACCESS ACHIEVED THROUGH PUMP DISASSEMBLY CASING WELCS C-G DURING 1R07s ALTERNATIVELY PER RELIEF 16 ,177,103 C6.10 REQUEST 87 DUE TO RADIATION 16 ,177,103 ENVIRONMENT A VISUAL EXAMINATION WAS PERFORMED IN LIEU OF SURFACE EXAMINATION. (C0181686) 244990 RHB-P D VT-1 MAG-CG-407 R5 F-.. ACCESS ACHIEVED THROUGH PUMP DISASSEMBLY OUTIET HEAD TO CASING WELD C-G DURING 1RO7; ALTERNATIVELY PER RELIEF 16 .177,103 C6.10 REQUEST 87, DUE TO RADIATION 16 ,177,103 ENVIRONME!rr, A VIS'AL EXAMINATION WAS PERFORMED IN LIEU CF SURFACE EXAMINATION. (C0181686)
RHR (REF DWC. NO 01-12) l245215'HBB-11851 FW1801 Mr I MAG-CG-403 R6 X..- (C0179977) l 208. PIPE TO FLANGE C-F.1 UT-OL UT LIM-106VO R0 X..-
-16 ,217,309 C5.11 UT-45S UT-LIM-106VD R0 ..X.
s
- 245235 168-118 1 FW1802 MT MAG.CG-403 R6 x-.. (C0179977) 20" FLANGE TO PIPE C.F-1 UT-OL UT LIM-106VD R0 X ..
16 .217,309 C5.11 UT-45S UT LIM 106VD R0 X.- . RHR (REF. DWG. NO. 01-11) 245340 R)( 027 Mr MAG-CG-403 R6 X... (C0178034) 24" PIPE TO 24'X24'X20* TEE C-F.2 17T-455 UT-LIM-102VO R0 ..X.
~16 ,177.103 C5.51 i
i
DATEt 08/01/00 LIMERICK GENERATI3 STATIC,N UNIT 1 PAGE: 36 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST Ot7tAGE (98RF) CIASS 2 CAUEP STATUS COMPONENTS JR R ASME OEGE SEC. XI RCEP SUbHARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RRR fPEF DWG. NO. 01-13) 345350 RH 028 MT MAC-CG-403 R6 X-- - (C0178034) 24'X24*X20* TEE TO 24'X24'X20' C-F-2 UT-45S LTT-LIM-102VO R0 .XX-TEE (24 ') C5.51 16 ,177,103
,343370 RH C30 MT MAG-CG-403 R6 X--- (C0178034) 24*X20" REDUCER TO 20" PIPE C-F-2 UT-455 UT-LIM-102VO R0 --X-16 ,177,103 C5.51 RHR (PEF. DWG. NO. 01-116) 348040 ECB-111-X-17 VT-3 MAG-CG-407 R5 X-- -
EXAMINATION PERFORMED FROM OUTBOARD ANCHOR F-A SIDE. (C0177867) 15 ,217,309 F1.20 RMR (REF. DWG. NO. 01-103) 340080 GBB-101-H015 VT-3 MAG-CG-407 RS X... (C0177804)
. VARIABLE SUPPORT F-A 15 ,201,203 F1.20 348130 GBB-101-H022 VT-3 MAG-CG-407 R5 X- -- (C0177904)
RIGID RESTRAINT F-A 15 ,201,203 F1.20 348150 GBB-101-H033 VT-3 MAG-CG-4 07 R5 K-.- (C0177804) MECHANICAL SNUBBER F-A+ 15 ,201,203 F1.20 RHR fREF. DWG. NO. 01-116) 348450 GBB-106-H001 VT-3 MAG CG-407 R5 X- -- (C0177867) VARIABLE SUPPORT FA 15 ,217,309 F1.20
j- DATE 08/01/94 LIMERICK GENERATING STATION UNIT 1 PAGE: 21 i REVISION
- 1 l
INSERVICE INSPECTION SUPNARY REPORT SECOND IFTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP i lSUp01ARY EXAMINATION AREA CATGY EXAM EOOO . NUMBER IDENTIFICATION ITEM NO METHOD 1 PROCEDURE CRMR REMARKS I i RHR fREF. DW1 No. 01-103) i249320 HBB-11*F-H001 :VT-3 MAG-CG-4 07 R$ X... (C0178042) VARIABLE SUPPORT F-A-l 15 ,201.102 F1.20 ' l I RHR fREF. DWG. No. 01-0M l 1 l249940 RHA 050 Mr MAG-CG.4 03 R6 X... (C0177804) ! 18' ELBOW TO PIPE C.F.2 tTf-45S UT-LIM-102VD R0 ..X. 15 ,201,203 C5.51 i l i ( l !250270 RHA 074 Mr MAG-CG-403 R6 X... (C0178042) 24* ELBOW TO VALVE HV.1F004A C-F-2 UT-45S Ur-LIM-102VO R0 X... 15 ,177,102 C5.51 i RHR (REF. DWG. NO 01-16) I
- 231560 RHA 220 PT MAG-CG-402 R4 X -.
(C0177867)
. 6' PIPE TO EIROW, BIMETALLIC C-F.1
, 13 ,217,309 C5.11 ( i-j, RHP (REF. DWG. NO. 01-106A) I @S2310- GBB 102-H001 VT-3 MAG-CG-407 R5 X.-. (C0177838) I MECHANICAL SNUBBER F A+- 16 ,217,309 F1.20 I j .. j852390 GBB-102-H026 VT 3 MAG-CG-407 R5 X... (C0177838) I l YARIABLE SUPPORT F-A 15 ,217,309- F1.20 i i h52420 GBB.102 H035 YT- 3 MAG-CG-407 R5 %... (C0177838) MECHANICAL SNUBBER F-A+ 16 .217,309 F1.20 I i _ _ _ _ _ _ _ _ . _ _ _ _ _ _ _ _ _ _ _ . . _ . _ _ . _ _ _ _ _ _ _ _ . _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ._ . _ _ _ _ _ _ _ . _ _ _ _ . . _ _ _ _ __. _._._______ . . . _ _ _ _ . _ _ _ _ _ _ _ _ _ _ _ . _ _ . _ _ . _ _____._...___.______________o
DATE: 08/01/98 LIMERICK CENERATING STATION UNIT 1 PAGE: 38 REVISION: 1 INSERVICE INSPECTION SUlHARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST CUTAGE (98RF) CLASS 2 CAUEP STATUS COMPONE!fTS NR R l ME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARXS RHR (R EF . DWG. NO. 01-06 A) l 854440 RHB 112A MT MAG.CG-4 03 R6 X..- (C0177838) 1 18' PIPE TO 18'X6' SWEEPOLET C.F-2 UT.45S UT-LIM.102VO RC X... 16 ,217,309 C5.81 354530 RHB 116 MT MAG-CG-4 03 R6 X-.. (C0177838) 18* PIPE TO VALVE HV.1F0478 C.F.2 UT.45S UT. LIM.102VO R0 ..X-16 ,217,309 C5.51 PHR (RFF. DWG NO. 01 112) 858730 HBB.118.H001 VT-3 MAG-CG-407 R5 X..- (C0179977) VARIABLE SUPPORT F-A 16 ,217,309 F1.20 RHR (REF. DWG. NO. 01-113) 858910 HBB-118.H037 VT-3 MAG.CG.407 R5 X... (C0178034) MECHANICAL SNUBBER F.A+ 16 ,177,103 F1.20 258930 MBB.118.H038 VT-3 MAG-CG.407 R5 X-.- (C0178034) MECMANICAL SNUBBER F.A+ 16 ,177,103 F1.20 l l 1 1 1 RHR f R EF. DWG NO. 01 106A) 359590 GBB.102.H035 (IA) MT MAG-CG.403 R6 X... (C0177838) PIPE SUPPORT, SLEEV C-C 16 ,217,309 C3.20
- PJtR (REF. DwG. NO. 01-103) i 399940 HBB.117-H001 (IA) MT MAG-CG-403 R6 X... (C0178042)
PIPE SUPPORT, 4 LUGS C.C 15 ,201,102 C3.20 l l l \ i l 1 l l i
l ., 1 DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGE: 29 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST CUTAGE (98RF) CLASS 2 CAUEP STATUS COMPONENTS I NR ~R ASME OEJE SEC. XI RCEP lftM4ARY EXAMINATION AREA CATGY EXAM EOOO ! NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARXS I RHR fREF DWJ . NO. 01-112) i
- 260005 HLB-118-H001 FW1803 A TO D (IA) MT MAG-CG-403 R6 X--- (C0179977)
PIPE SUPPORT, 4 LUCS C-C 16 ,217,309 C3.20 FW fREF. DWG. NO. 05-06)
- 481711 FWB 040 UT-45S Ur-LIM-106VD R0 X-- -
IC017734 7) PIPE TO VALVE HV*1F032B N/A, 11 ,279,518 N/A 481721 FWB 041 ITT-4 5S UT-LIM-106VO R0 X--- (C0177449) 248 TEE TO PIPE N/A+ 11 .279,518 N/A l PPV (REF. DWC. NO. XI RPV-1 PG. 1,2) 600670 N1B UT-OL UT-LIM-702VC RO X--- COMBINED TRANSVERSE AND CIRCUMFERENTIAL RECIRC. OUTLET LOOP B BD ITT-4 5S UT-LIM-702VD RO X. -- EXAMINATION LIMITED TO 60% CODE COVERAGE 1CC, 279'8", 400/180 B3.90 UT 60S UT-LIM-702VD R0 X- -. DUE TO N0ZZLE CONFIGURATION. (C0176783) iO00680 N1B-IR ZONE 1 UT-LIM-703V1 RO .-X- (C0176783) RECIRC. OUTLET LOOP B B-D ZONE 2A UT-LIM-703V1 RO --X-16C, 279'8', 400/180 B3.100 (000700 N2A , UT-OL UT-LIM-702VD R0 X.-. COMBINED TRANSVERSE AND CIRCUMFERENTIAL RECIRC, INLET LOOP B B-D UT-45S UT-LIM-702VO 10 X-- - EXAMINATION LIMITED TO 61.9% CODE I 12C, 281'4", 400/30 B3.90 UT-60S Ur LIM-702VO R0 --X- COVERAGE DUE TO NO'4 ZLE CONFIGURATION. 12C, 281'4', 400/30 (C0176710) i l l 00710 N2A-IR- ZONE 1 UT. LIM.703V1 R0 ..X- (C0176710) ( RECIRC. INLET LOOP B B-D ZONE 2A UT-LIM-703V1 RO --X-12 C, 2 81 ' 4 ", 400/30 B3.100 i l
DATE: 08/01/94. LIMERICK GENERATZNG STATION UNIT 1 PAGE: 30 REVISION: 1 INSERVICE INSPECTION SID94ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATX COMPONENTS i NR R ASME OEGE SEC. XI ACEP Stht4ARY EXAMINATION AREA CATGY EXAM EOOO l 1 NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV 'REF. DWG, No. XI.PPV-1 PG. 1.2) 600700 N2D UT.0L UT. LIM.702VO R0 X. .. COMBINED TRANSVERSE AND CIRCUMFERENTIAL RECIRC. INLET LOOP B B-D UT-45S tTT. LIM 702V0 R0 ..X. EXAMINATION LIMITED TO 61.9% CODE 16C, 281'4", 400/120 B3.90 UT.6 0S UI. LIM-300VO R0 .-X- COVERAGE DUE TO N0ZZLE CONFIGURATION. 16C, 281'4", 400/120 (C0176723) 600800 N2D.IR ZONE 1 UT. LIM 703V1 R0 .-X. (C0176723) RECIRC. INLET LOOP B B.D ZONE 2A ITT. LIM 703V1 R0 --X. 16C, 281'4", 400/120 B3.100 600850 N2F UT.0L tTT. LIM.702VO R0 X.-- COMBINED TRANSVERSE AND CIRCUMFERENTIAL RECIRC. INLET 140P A B-D UT.455 UT. LIM 702VD R0 ..X. EXAMINATION LIMITED TO 61.9% CODE 15C, 281'4", 400/210 B3.90 UT.60S UT. LIM-702VD R0 . 1- COVERAGE DUE TO N0ZZLE CONFIGURATION. 15C, 2 81' 4 ", 400/210 (C0176739) 600060 N2F.IR ZONE 1 UT LIM.703V1 R0 ..X- (C0176739) RECIRC. INLET LOOP A B-D ZONE 2A UT. LIM-703V1 R0 ..X-15C, 281'4 *, 4 00/210 - B3.100 60088* N2G UT-OL LTT. LIM.702VC R0 X.-. COMBINED TRANSVERSE AND CIRCUMFERENTIAL RECIRC. INLET LOOP A B.D UT-45S ITT. LIM 702VD R0 K. .- EXAMINATION LIMITED TO 61.9% CODE 15C, 281'4', 400/240 B3,90 UT.60S UT. LIM-702VO RO -.X. CrVERAGE DUE TO N0ZZLE CONFIGURATION. 15C 281'4', 400/240 'C0176747) 600890 N2G.IR ZONE 1 UT. LIM.703V1 R0 ..X. (C0176747) RECIRC. INLET LOOP A B.D ZONE 2A UT. LIM.703V1 R0 ..X. 15C, 2 81' 4 ", 400/240 B3.100 600910 N2H UT.0L UT. LIM-702VO R0 X... COMBINED TRANSVERSE AND CIRCUMFERENTIAL RECIRC. INJ' T LOOP A B-D U7 45S UT. LIM.702VD R0 X... EXAMINATION LIMITED TO 61.9& CODE 15C, 281'4*, 400/270 B3.90 17T-605 UT. LIM-702VD RO ..X. COVERAGE DUE TO N0ZZLE CONFIGURATION. 15C, 281'4', 400/270 ITT-OL UT. LIM.300VO R0 X..- (C0176751) UT.45S UT. LIM.300VO R0 X--- UT.60S ITT. LIM-300VO R0 X. .-
DATES'08/01/98 -LIMERICK GENERATII:0 ETATION UNIT 1 PAGEt il 1 REVISION: 1 INSERVICE INSPECTION StD9%RY REPORT 1 SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE-{98RF) I CLASS 1 CAUEP STATUS COMPCNENTS l , NR R !- ASME OEGE t l SEC. XI RCEP 1' jStBGERYEXAMINATIONAREA CATGY EXAM EOOO { p,NtDGER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l............................................ .......... ................ .... ........................................ ( RPV (REF. DWC. No. Xf-RPV-1 PG. 1.2) { 600920 N2H.IR ZONE 1 (TT-LIM-703V1 R0- ..X. (C0176751) RECIRC. INLET LOOP A' B-D ZONE 2A ITT. LIM.703V1 ko . X. ! 15C ' 281'4", 400/270 B3,100 J-I f601060 K3C t?T.0L UT. LIM 702VO R0 X -. COMBINED TRANSVERSE AND CIRCUMFERENTIAL [ MAIN STEAM 100P C B.D Ifr.458 UT LIM 702VO R0 . X. EXAMINATION LIMITED TO 58.4% CODE { 15C 321'1*, 400/252 B3.90 UT.60S UT. LIM 702VD RO ..X. COVERAGE DUR TO NOZZLE CONFIGURATION. 15C, 321'1*, 400/252 UT.0L ITT. LIM.300VO R0 ' X... (C0176766) l UT-45S UT. LIM.300VO R0 X..- l UT-60S LTT. LIM.300VO R0 X .. 601070 N3C.IR ZONE 1 UT. LIM 703V1 RO. X .- (C0176766) MAIN STEAM LOOP C BD ZONE 1 UT-LIM-311VD R0 X-.. 15C, 321'1', 400/252 B3.100- ZONE 2A UT. LIM-703VI R0 ..X- ' i 15C 321'1*, 400/252 ZONE 2A 17T. LIM.311VO R0 .... ! i601090- N3D 1 tTT.0L ITT. LIM 702VC RD .X'. . . COMBINED TRANSVERSE AND CIRCUMFERENTIAL j ! i MAIN STEAM LOOP D B.D UT 45S ITT LIM 702VO R0 ..X- EXAMINATION LIMITED TO 58.4% CODE j lic,' 321'1', 400/288- 33.90 - UT-605 UT LIM 702VC R0 ..X-COVERAGE DUE TO N0ZZLE CONFIGURATION. d
, 11C 321'1*, 400/288 (C0177354)
)
l 3 !601100 N3D.IR ZONE 1 UT. LIM-703V1 R0 . .X. (C01773541 MAIN STEAM ICOP D B-D ZONE 2A ITT. LIM *703V1 R0 ..X. 11C, 321'1", 400/288 B3.100 i !
- k
'601300 NSA- 17T.0L UT. LIM-702VD R0 X..- COMBINED TRANSVERSE AND CIRCUMFERENTIAL l- CORE SPRAY LOOP B B-D UT-45S UT. LIM-702Y0 R0 X... I EXAMINATION LIMITED TO 61.9% CODE 12C. 306'7', 400/60 - B3.90 UT.60S UT. LIM.702VO R0 . X. COVERAGE DUE TO NOZZLE CONFIGURATION. ! 12C, 30687*, 400/60 (C0177024) l l l 1 l601310 N5A.IR ZONE'1 17T. LIM.703V1 R0 ..X* (C0177024) CCEE SPRAY IDOP B BD ZONE 2A UT. LIM.703V1 R0 ..X. 12C, 306 '7*, 400/60 B3.100 l l 1 I . l I L__________._1_ _r________o_ + _ - - - - - - - - _ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ----- - -------------- - ^--------~ ------
l l } DATES 08/01/98 LIMERICK CENERATING STATION tJNIT 1 PAGE: 32 REVISION: 1 INSERVICE INSPECTION SIM4ARY REPORT SECOND INTERVAL,'FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SIMtARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION . ITEM rIO METHOD PROCEDURE CRMR REMARKS RPV (REF.-DWG. NO. XI-PPV-1 P3. 1.2) 601330 NSB Iff 0L ITT. LIM-702VO R0 X*.. COMBINED TRANSVERSE AND CIRCUMFERENTIAL CORE SPRAY LOOP A BD 177-45S UT-LIM-702VO R0 .-X. EXAMINATION LIMITED TO 61.9% CODE 11C 306'7", 400/300 B3.90 UT.60S UT-LIM-702VO R0 ..X. COVERAGE DUE TO NOZZLE CONFIGURATION. 11C, 306'7", 400/300 (C0177022)
-601340 NSB IR ZONE 1 UT LIM-703V1 RO ..X. (C0177022)
CORE SPRAY LOOP A BD ZONE 2A 17T. LIM-703V1 R0 ..X. 11C, 30f'7", 400/300 83.100 601430 N8A IIT OL Ur-LIM-300VO R0 X... COMBINED TRANSVERSE AND CIRCUMFERENTIAL J. P. INSTRUMENTATION LOOP B B.D UT-455 UT-LIM-300VO R0 X*-. EXAMINATION LIMITED TO 40.1% CODE 16C, 2798, 400/105 B3.90 UT.60S UT* LIM-300VO R0 X.. . COVERAGE DUE 10 NOZZLE CONFIGURATION. 16C, 279', 400/105 (C0177692) 601430 N8A-IR ZONE 1 ITT. LIM-311VO R0 X... (C0177692) J. P, INSTRUMENTATION LOOP B B-D ZONE 2A UT. LIM-311VO RO X. .. 16C, 279', 400/195- 33.100 601440 M88 UT-OL VT-LIM-300VO R0 X. .. COMBINED TRANSVERSE AND CIRCUMFERENTIAL J, P, INSTRUMENTATION LOOP A B-D UT-458 17T-LIM-300v0 R0 X. *. EXAMINATION LIMITED TO 60.1% CODE 11C, 27 9 ' , 400/285 83.90 UT.60S 17T-LIM-300VO R0 X. -. COVERAGE DUE TO NOZZLE CONFIGURATION. 11C, 279', 400/285 (C0176694) 601450 N88 IR ZONE 1 UT LIM-311VD R0 X. .. (C0176694) J. P, INSTRtJMENTATION LOOP A B-D ZONE 2A UT. LIM-311VO R0 - X..- 11C, 279 ', 400/285 B3.100 h. 601460 N9 UT-OL UI-LIM-703V1 R0 X..* COMBINED TRANSVERSE AND CIRCUMFERENTIAL
'CRD RETURN, NOZZLE (CAPPED) B-D UT-45S tff LIM-703V1 RD X.-. EXAMINATION LIMITED TO 60.1% CODE 16C, 303'7", 4 00/146 B3.90 UT 60S UT-LIM-703V1 R0 X... COVERAGE DUE TO NOZZLE CONFIGURATION.
16C, 303'7", 4 00/146 (C0176992)
I l i DATE: 08/01/98 LIMERICK OENERATING STATION UNIT 1 PAGE: 33 REUISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP EUtEARY EXAMINATION AREA CATOY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS 1 PPV fREF. DWG. NO. XI-PPV-1 PO. 1.2) I i001470 C9-IR ZONE 1 UT-LIM-311VO R0 X--- (C0176992) CRD RETURN, NOZZLE INSIDE B-D ZONE 2A UT-LIM-311VO R0 X--- RAD 3US (CAPPED) B3.100 16C, 303'7*, 400/146 l 001490 N17A UT-OL UT-LIM-702VO R0 X--- COMBINED TRANSVERSE AND CIRC"JMFERENTIAL LPCI 140F B, NOZZLE TO VESSEL B-D UT-4 5S Ur-LIM-702VO R0 --X- EXAMINATION LIMITED TO 61.9% CODE i WELD B3.90 UT-60S UT-LIM-702VO R0 --X- COVERAGE DUE TO NCZZLE CONFIGURATION. lac, 297'3", 400/45 i ! (C0176973) l i ?01500 N17A-IR ZONE 1 UT LIM-703V1 R0 --X- (C01769731 LPCI LOOP B. NOZZLE INSIDE BD ZONE 2A UT-LIM-703V1 R0 --X-RADIUS B3.100 13C, 297'3", 400/45 )01530 N178 UT OL UT-LIM-702VO R0 X--- COMBINED TRANSVERSE AND CIRCUMFERENTIAL LPCI LOOP D. NOZZLE TO VESSEL B-D UT-45S UT-LIM 702,r0 RO --X- EXAMINATION LIMITED TO 61.9% CODE I WELD B3.90 UT-60S Ur-LIM-702VO RO --X- COVERAGE DUE TO NOZZLE CONFIGURATION. 16C, 297'3', 400/135 l (C0176978) )0W30 N17B-IR ZONE 1 UT-LIM-703V1 RO --X- (C0176978) j LPCI LOOP D, NOZZLE INSIDE B-D ZONE 2A UT-LIM-703V1 R0 --X-RADIUS B3.100 36C, 297'3", 400/135 301580 N17D UT-OL UT-LIM-702VC R0 X---
- COMBINED TRANSVERSE AND CIRCUMFERENTIAL LPCI LOOP C, NOIZI.E TO VESSEL BD UT-45S UT LIM-102VD R0 X-- -
EXAMINATION LIMITED TO L .9% CODE WELD B3.90 UT-60S Ur-LIM-702VO RO --X- COVERAGE DUE TO NOZZLE CONFIGURATION. lic, 297'3a, 400/315 (C0176983) l t f01390 N17D IR EONE 1 UT-LIM-703V1 RO --X- (C0176983)
~ LPCI 140P C, NOZZLE INSIDE B-D ZONE 2A UT-LIM-703V1 RO - X-RADIUS B3.100 11C, 297'3", 400/315 l
C_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . _ _ _ _ . _ _ _ _ _ _ _ _
DATES. 08/01/08 LIMERICK GENERATENG STATION UNIT 1 PAGE: 34 REVISION: 1 INSERVICE INSPECTION SIM1ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUP9tARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METH]D PROCEDURE CRMR REMARKS RR (REF. DWG, NO. 07-02) 601770 VRR-1RS.18 N1B- PT LP. LIM-001V3 R1 X-.. (C0176783) NOZZLE TO SAFE END (AZ. 180 B-F+ (TT-4 5S ITf LIM-209V1 R0 X... DEG) 85.10 TTT-45RL ITT-LIM-209V1 R0 X-.. 16C, 279'8*, 400/180 (TT-6 0RL UT-LIM.209V1 R0 X.. . ITT-35RL ITT-LIM-209V1 R0 X*-. 601780 VRR-1RS-1B N1B ITT-455 (IT-LIM-209V1 R0 X.-. EXAMINED PER AUG-01, NRC GL 88-01, NOZZLE TO SAFE END (AZ. 180 N/A+ ITT-45RL UT-LIM-209V1 R0 X- - INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A ITT-60RL ITf-LIM-209V1 RQ X*-. (C0176783) 16C, 279'8", 400/180 UT-35RL ITI-LIM-209V1 R0 X-..
'601781 VRR-1RS-1B N1B ITT-4 5S ITI-LIM-209V1 R0 X-- - EXAMINED PER AUG-07, SIL 455,
, NOZZLE TO SAFE END (AZ, 180 N/A+ UT-45RL ttf-LIM-209V1 RO X.-. RECOtttENDATION FOR ADDITIONAL ISI OF DEG) N/A UT-60RL ITT-LIM-209V1 R0 X-.. ALLOY 182 NOZZLE WELDMENTS. (C0176783) 16C, 279'8*, 400/180 ITf-35KL UT-LIM-209V1 R0 X...
601700 VRR-1RD-1B N2A PT LP-LIM-001V3 R1 X-.. (C0176710) NOZZLE TO SAFE END (AZ. 30 B-F+ ITI-45S ITT. LIM-209V1 R0 X.-- DEG) B5.10 tTf-45RL ITf-LIM-209V1 R0 X.-- 12C, 241'4 5 400/30 UT-60RL ITT-LIM-209V1 R0 X-.. ITI- 35RL ITT-LIM 209V1 R0 X-.- 601800-VRR.1RD-1B N2A UT-458.. ITT-LIM-209V1 R0 X. - EXAMINED PER AUG-01, NRC GL 88-01, NOZZLE TO SAFE END (AZ. 30 N/A+ UT-45RL ITf-LIM-209V1 R0 X-.. INTERGRANULAR STRESS CORROSION CRACXING. DEG) N/A ITT-60RL IT-LIM-209V1 R0 X-- - (C0176710) 12C, 281848, 400/30 UT.35RL UT-LIM-209V1 R0 X.. -
.?01801 VRR-1RD-1B N2A UT-458 tTI-LIM-209V1 R0 X..- EXAMINED PER AUG-07, SIL 455, NOZZLE TO SAFE END (AZ. 30 N/A+ UT-45RL UT. LIM-209V1 R0 X--. RECOP94ENDATION FOR ADDITIONAL ISI OF DEG) N/A ITI-60RL tTI LIM 209VI R0 X--- ALLOY 182 NOZZLE WE'N S. (C0176710) 12C, 2 81' 4 ', 400/30 (TI- 35RL (Tf-LIM-209V1 R0 X...
601850 VRR-1RD-1B N2D PT LP-LIM-001V3 R1 X-. . (C0176723) NOZZLE TO SAFE END (AZ.120 B F+ ITT-45S UT-LIM-209V1 R0 X.-. DEG) B5.10 tTT-45RL LTT-LIM-209V1 R0 X... 16C, 281'4", 400/120 tTT-60RL ITT LIM-209V1 R0 K... tTT-35RL LTf-LIM 209V1 R0 X...
CATE: 04/01/98 LIMERICK CENERATING STATION UNIT 1 PAGE: 35
-REVISION: 1 INSERVICE INSPECTI")N SUP94ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) z CIASS 1 CAUEP STATUS COMPONENTS NR R ME OEGE 1 SMC. XI RCEP SUP94ARY EXAMINATION AREA CATGY EXAM Eo00 NUMBER IDENTIFICATION ITEM No METHOD PROCEDURE CRHR REMARXS RR (REF. DWG, NO. 07-02) i 601860 VRR 1RD-1B N2D UT-45S UT-LIM-209V1 R0 X-.- EXAMINED PER AUG-01, NRC GL 86 01, '
NO2ZLE TO SAFE END (AZ. 120 N/A+ UT-45RL UT-LIM.209V1 RO X--- 1 INTERGRANULAR STRESS CORROSICN CRACKING. DEG) N/A UT-60RL UT-LIM-209VI R0 X-.. (C0176723) { 16C, 281'4', 400/120 UT-35RL UT-LIM 209V1 R0 X-.. i l l [601831 VRR-1RD.1B N2D UT-45S Ur-LIM-209V1 R0 X--. EXAMINED PER AUG-07, SIL 455, i NOZZLE TO SAFE END (A2. 120 N/A+ UT-45RL UT-LIM-209V1 R0 X--- REcotNENDATION FOR ADDITIONAL ISI 0F DEG) N/A UT-60RL l UT-LIM-209V1 R0 X--. ALLOY 182 N02ZLE WELDMENTS. (C0176723) 16C, 281'4a, 400/120 UT.35RL UT-LIM-209V1 R0 X--. l RR (REF. DWG. No. 07-01) = l l601890. VRR 1RD=1A IT2P PT LP-LIM-001V3 R1 X- - (C0176739) SAFE END TO NOZZLE (AZ. 210 B-F+ UT-45S UT-LIM-209V1 R0 X- - DEG) 85.10 UT.45RL UT LIM-209V1 R0 X--. 15C, 281'4', 400/210 UT-60RL UT-LIM 209V1 R0 X- - UT-35RL UT-LIM-209V1 R0 X .. '601900 t"RR.1RD-1A N2F UT-45S UT-LIM-20TV1 RO X- .- - EXAMINED PER AUG-01, NRC CL 88-01, SAFE END TO N0ZZLE (AZ. 210 N/A+ UT 45RL Ur-LIM-209V1 R0 X--- INTERGRANULAR STRESS CORROSION CRACXING. DEC) N/A UT-60RL Ur-LIM-209V1 A0 X--. (C0176739) 15C, 281'4*, 400/210 UT-35RL UT-LIM-209V1 R0 X--- 403901. t'RR.1RD-1A N2P UT-45S UT-LIM-209V1 R0 X. - EXAMINED PER AUG-07, SIL 455, SAFE END TO NCZZLE (AZ. 210 N/A+ UT 45RL UT-LIM-209V1 10 X--- RECCDMENDATION FOR ADDITIONAL ISI 0F DEG) N/A UT-60RL UT-LIM-209V1 R0 X... ALLOY 182 NC2ZLE WELDMENTS. (C0176739) 13C, 281'48, 400/210 UT-35RL UT-LIM-209V1 R0 X--- d01910 VRR-1RD*1A N2G PT LP-LIM-001V3 R1 X... (C0176739) SAFE END TO N0ZZLE (AZ. 240 B-F+ UT-453 UT-LIM-209V1 R0 X-.- l 9EG) B5.10 UT-45RL UT-LIM 209V1 R0 X--- 15C, 281'4*, 400/240 UT-60RL UT-LIM-209V1 R0 X--. UT-35RL UT. LIM-209V1 R0 X--- i . l_______.___ __.__.__m_ _ _ . _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . _ - _ _ . . . _ _ _ _ _ _ _ ._m__._.__ . _ _ _ _ _ _ . . _ . _ - _ _ _ _ . _ _ _ _ . . _ _ ______________.m
DATE: 08/01/98 LIMERICK GENERATIC3 STATION UNIT 1 PAGE: 36 REVISION: 1 INSERVICE INSPECTION SUP91ARY REPORT SECOND INTERVE, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS [- NR R ME OEGE SEC. XI RCEP SUPMARY EXAMINATION AREA- CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRHR REMARXS
. RR (REF, DWG. NO. 07-01) 601930 VRR 1RD-1A N2G UT-45S UT-LIM-209V1 R0 X--- EXAMINED PER AUG-01, NRC GL 88 01, SAFE END TO NOZZLE (AZ.-240 N/A+ UT-45RL UT LIM-209V1 R0 X--. INTERGRANULAR STRESS CORROSION CRACXING.
DEG) N/A (TT-60RL UT-LIM 209V1 R0 X .- (C0176747) 15C, 281'4*,-400/240 Ur-35RL ITT-LIM-209V1 R0 X... 601931 VRR-1RD-1A N20- UT-45S UT-LIM-209V1 R0 X--- EXAMINED PER AUG 07, SIL 455,
- SAFE END TO NOZZLE (AZ. 240 N/A+ UT-45RL UT-L10 209V1 R0 X-- .
RECOP94ENDATION FOR ADDITIONAL ISI OF DEG) N/A UT-60RL UT-LIM-209V1 R0 X--- ALLOY 182 NOZZLE WELDMENTS. (C0176747) 15C, 281' 4 * , 400/240 UT-35RL UT-LIM-209V1 RO X-- - 601930- VRR 1RD-1A N2H PT LP-LIM-001V3 R X--- THE REPORTABLE INDICATIONS OBSERVED SHOW SAFE END TO NOZZLE (AZ 270 B-F+ UT-45S UT-LIM-209V1 R0 X--- NO MEASURABLE CHANGE IN EITHER THE DEG) 85.10 UT-45RL UT-LIM-209V1 RO -XXX THRU-WALL CR LENGTH DIMENSIONS FROM 15C, 281'4", 400/270 UT-60RL UT-LIM-209V1 R0 .XXX PREVIOUS INSPECTIONS. (C0176751) Ur-35RL UT-LIM-209V1 R0 X--- UT*45RL GE UT*226V2 RO -XXX UT-60RL GE-UT-226V2 R0 .XXX ITT-10RL GE CT-226V2 R0 X.-- 601940 VRR 1RD 1A N2H ITT-45S UT-LIM-209V1 R0 X-. - EXAMINED PER AUG-01, NRC GL 88 01, SAFE END TO NOZ1 4 (AZ. 270 N/A+ UT-45AL UT-LIM-209V1 R0 -XXX "INTERGRANULAR STRESS CORROSION DEG) N/A UT 60RL ITT-LIM-209V1 R0 -XXX CRACKING *, THE REPORTABLE INDICATIONS 15C, 281'4", 400/270 UT-35RL GE-UT-226V2 R0 X- - OBSERVED SHOW NO MEASURABLE CHANGE IN tTT-45RL GE.UT-226V2 R0 -XXX EIThER THE THRU-WALL OR LENGTH UT-60RL GE-UT 226V2 R0 .XXX DIMEN IONS FROM PREVIOUS INSPECTIONS. UT-70RL GE-UT-226V2 R0 X- - (C0176751) 001941 VRR-1RD-1A N2H UT 45S UT-LIM-209V1 R0 Xa . - EXAMINED PER AtX3-07, SIL 455, SAFE END TO NOZZLE (AZ. 270 N/A+ UT-45RL UT-LIM-209V1 R0 -XXX "RECOP94ENDATION FOR ADDITIONAL ISI OF DEG) N/A UT-60RL UT-LIM.209V1 R0 -XXX ALLOY 182 NOZZLE WELDMENTS' THE 150, 281'4*, 400/270 UT-35RL GE-UT-226V2 R0 X--- REPORTABLE INDICATIONS OBSERVED SHOW NO UT-45RL GE UT 226V2 RO -XXX P*EASURABLE CHANGE IN EITHER THE UT-60RL GE-UT-226V2 RO -XXX THRU WALL OR LENGTH DIMENSIONS FROM UT-70RL GE-UT-226V2 R0 X--- PREVIOUS INSPECTIONS. (C0176751)
i I ,'DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGEs 31
-REVISION: 1 INSERVICE INSPECTION SUP94ARY REPORT k" SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF)
CLASS 1 CAUEP STATUS COMI)NENTS NR R
- ASME OEGE SEC. XI RCEP SUP91ARY EXAMINATION AREA CATGY EXAM EOOC l NUMBER IDENTIFICATION . ITEM NO METHOD PROCEDURE CRMR REMARKS CS fREF. DWO. NO. 04-041
! 601990 _ DCA-3191 NSA PT LP LIM-001V3 R1 X--- (C0177024) N0ZZLE TO SAFE END (AZ. 60 B F+ UT-45S UT-LIM-209V1 RO X. - DEG) B5.10 UT 4 5RL - UT-LIM-209V1 RO X- - 12C, 306 '7", 400/60 UT-60RL UT LIM-209V1 R0 X*-- UT-35RL UT LIM-209V1 R0 X--- { 1602000 DCA-319-1 NSA UT-45S W . LIM-209V1 R0 X..- (C0177024) N0ZZLE TO SAFE END (AZ. 60 N/A+ UT-45RL UT-LIM-209V1 R0 X.-- DEG) N/A UT-60RL UT-LIM 209V1 R0 X,.. , 12C. 306'7", 400/60 UT-35RL UT-LIM-209V1 R0 X .. t t i 602001 DCA.319 1 NSA UT 45S UT-LIM-209V1 RO X-+- (C0177024) { COZZLE TO SAFE END (AZ. 60 N/A+ UT-45RL UT-LIM-209V1 R0 X .- 1 DEG) N/A UT-60RL UT-LIM-209V1 R0 X-.- 12C, 306'7', 400/60 UT-35RL UT-LIM.209V1 R0 l X... C02010 DCA 319-1 FW1 PT LP-LIM-001V3 R1 X... (C0177024) 10* PIPE To SAFE END (AZ. 60 B-F+ Ur-45S GE-UT-225V3 R0 .-X-l DEG) B5.130 UT-45RL GE-UT-225V3 R0 ..X-l 12C, 306'7*, 400/60 f I I J l l 002011 DCA-319-1 FW1 LU PT LP-LIM-001V3 R1 X... (C0177024) ' } , 10' PIPE SEAM B-J UT 45S GE-UT-225V3 RO X..- 12C 306'7*, 400/60 B9,12 ' I l i 1 002012 CCA-319-1 FW1 UT-455 GE.UT-225V3 R0 ..X. EXAMINED PER AUG-01, NRC GL BP 01, 10E PIPE TO SAFE END (AZ. 60 f 1 N/A+ UT-45RL GE-UT-225V3 R0 ..X. INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0177024) 12C, 306'7', 4 00/60 l' CS fREP. DWO. NO. 04 '11 s02020 DCA-320-1 NSB PT LP-LIM-001V3 R1 X. - (C0177022) MOZZLE TO SAFO END (AZ. 300 B F+ . UT*455 UT-LIM-209V1 R0 .-X-DEG) 25.10 UT-45RL UT LIM-209V1 R0 . X. 11C,3 06 '7',4 00 /3 00 UT-60RL UT-12M-209V1 R0 . X-UT-35RL UT-LIM-209V1 RO + -X. L___________________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
DATE: '08/01/98' LIMERICK GENERATING STATION tRf!T 1 PAGE: 38 REVISIOW1 1 INSERVICE INSPECTION St# NARY REPORT SECOND IFTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC, XI RCEP StDNARY EXAMINATION AREA CATGY EXAM EOOO NLNBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS
....... ......n....................... ....... .......... ................ .... ........-...............................
CS (PEF DWG. NO. 04 0,},j, 603031 DCA-320 1 NSB UT.45S W-LIM-209V1 R0 -.X. EXAMINED PER AUG-01, NRC GL 88-01, NOZlLE TO SAFE END (AZ. 300 N/A+ (Tf.45RL UT-LIM.209V1 R0 ..X. INTERGRANULAR STRESS CORROSION CRACKING. DEGI N/A UT-60RL UT. LIM-209V1 R0 ..X (C0177022) 11C,306'7",400/300 UT.35RL UT-LIM-209V1 R0 ..X. 603031 DCA-320-1 WSB UT.45S ITr. LIM-209V1 R0 .-X- EXAMINED PER AUG-07, SIL 455, NOZZLE TO SAFE amD (AZ. 300 N/A+ UT.45RL UT-LIM-209V1 R0 ..X- RECOMMENDATION FOR ADDITIONAL ISI OF DEG) N/A UT.60RL UI-LIM-209V1 R0 ..X* ALLOY 182 NOZZLE NELDMENTS. (C0177022) 11C,306'7",400/300 UT.35RL UT-LIM-209VI R0 ..X. 603040 DCA-320 1'FW1 PT LP-LIM-001V3 R1 X... (C0177022) 10' PIPE TO SAFE END (A2. 300 B-F+ ITT.4 5S GE-tTT-225V3 R0 . X. DEG) B5.130 (TI-45RL GE UT-225V3 RO -.X. 11C,306'78,400/300. 002041 DCA-320-1 FN1 LU PT LP-LIM-001V3 R1 X... (C0177022) 10' PIPE SEAM B-J 17f.45S UT-LIM-209V1 R0 X... 11C,306'7",400/300 89 12 602043 DCA-320-1 FW1 UT 455 GE-tTI-22 5V3 RD ..X. EXAMINED PER AUG-01, NRC GL 88-01, 10" PIPE TO SAFE END (AZ. 300 N/A+ UT.45RL GE.UT.225V3 R0 ..X. INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0177022) 11C,306 1* ,4 00/3 00 RPV- APP 1REF. DWG. NO XI-RPV.11NI 1 603050 RPV.1IN NBA ,, PT LP-LIM-001V3 R1 X... (C0176692) , NOZZLE TO SAFE END (JET PUMP B-F+ UT.458 UT-LIM-105VD R0 X-.. ! INSTRUMEFT . AZ.105 DEG) B5.10 UT 45RL UT-LIM-10$VO RD ..X. 16C, 279,400/105 j 602060 RPV.11N NGA UT 45S UT LIM.105VD R0 X... EXAMINED PER AUG-01, NRC GL 88-01, i NOZZLE TO SAFE END (JET PUMP N/A+ ITF-45RL UT-LIM-105VD R0 ..X- INTERGRANUM' STRESS CORROSION CRACKING. l 4 INSTRUMENT . A2. 105 DFG) N/A (C0176692) ' 16C, 279,400/105 i
DATE: 08/01/98 LZMERICX GENERATING STATIC 3 UNIT 1 PAGE: 39 l REVISION: 1 INSERVICE INSPECTION St.M4ARY REPORT } SECOND INTERVAL, FIRST PERIOD, FIRST OWAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS i NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV-APP (PFF. DWG, NO. XI-PPV-IIN) 608061 RPV-11N N8A W -45S UT-LIM-105VD RD X.-- EXAMINED PER AUG-07, SIL 455, NOZZLE TO SAFE END (JET PUMP N/A+ 17T-45RL UT-LIM-105VO RO ..X. RECOF94ENDATION FOR ADDITIONAL ISI OF INSTRUMENT . AZ. 105 DEG) N/A ALLOY 182 NOZZLE WELDMENTS. (C0176692) 16C, 279,400/105
- 602070 RPV-11N NSB PT LP-LIM-001V3 R1 X -. (C0176694)
NOZZLE TO SAFE END (JET PUMP B-F+ UT-45S UT-LIM-105VD R0 X... ZNSTRUMENT . AZ. 289 DEG) 85.10 UT-45RL UT. LIM-105VO R0 -.X. 11C,279,400/285 602080 RPV.1IN N8B UT-458 Ur-LIM-105VD RD X- -. EXAMINED PER AUG-01, NRC GL 88-01, NOZZLE TO SAFE END (JET PUMP N/A+ UT-45RL UT LIM-105VD R0 .-X- INTERGRANULAR STRESS CORROSION CRACKING. INSTRUMENT
- AZ. 289 DEG) N/A (C0176694) 11C.279,400/285 603081 RPV 11N NSB UT-455 UT-LIM-105VD R0 X-.. EXAMINED PER AUG-07, SIL 455, NOZZLE TO SAFE END (JET PUMP N/A+ UT-45RL UT. LIM-105VD R0 ..X* RECOMMENDATION FCR ADDITIONAL ISI OF INSTRUMENT AZ. 289 DEG) N/A ALLOY 182 NOZZLE WEID4ENTS. (C0176694) 11C. 279,400 /285 l
602090 RPV.11N N9 PT LP-LIM-001V3 R1 X. .. (C0176992) NOZZLE TO CAP (CRD HYDRAULIC B-F+ UT-45S UT-LIM-105VO R0 X -. RETURN . AZ, 146 DEG) B5.10 UT-45RL UI-LIM-105VO R0 X. - 16C, 303'7", 400/146 602100 RPV.11N N9 UT-458 UI-LIM-105VD R0 X.-. EXAMINED -ER AUG.01, NRC GL 88-01, NOZZLE TO CAP (CRD HYDRAULIC N/A+ UT-45RL UT-LIM-105VO RD X..- INTERGRANULAR STRESS CORROSION CRACKING. RETURN . AZ 146 DEG) N/A (C0176992) 16C,'303'7", 400/146 i 603101 ~ RPV.1IN N9 UT.458 UT-LIM-105VQ RD X... EXAMINED PER AUG-01, SIL 455, l NOZZLE TO CAP (CRD HYDRAULIC N/A+ UT*45RL UT-LIM-105V0 R0 X... RECOMMENDATION FOR ADDITIONAL ISI OF RETURN AZ. 146 DEG) N/A ALLOY 182 NOZZ'.E WELDMENTS. (C0176992) l 16C, 303 '7 , 400/146 t
DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGE: 40 RE'"oSION : 1 INSERVICE INSPECTION SW94ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OtTTAGE (98RF) CLASS 1 CAUEP STATUS COMPONE!TTS I NR R ASME OEGE SEC. XI RCEP SUtf1ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV- APP (PEF. CWG. NO. XI-PPV-IIN f N11 Al l 603130 RPV-11N N11A VT-3 MAG-CG-401 R8 X-- - EXAMINED PER DISPOSITION OF NCR # INSTRUMENT NOZZLE TO SAFE END B-F 97-00484. (A1081930) (AZ. 10 DEG) B5.20 12C, 309'4", 400/10 RPV-APP (R EF . DWG. NO, XI-RPV-11N fN11Bl) 603130 RPV.IIN N11B VT-3 MAG-CG-401 R8 X.-- EXAMINED PER DISPOSITION OF NCR # INSTRUMENT NQZZLE TO SAFE END i,- F 97-00484. (A1081930) (AZ. 200 DEG) B5.20 15C, 309'4', 400/200 PPV-APP (PEF Dwl NO. XI-RPV-1 TN 'N12 A) ) 603140 RPV-11N N12A VT-3 MAG-CG-401 RB X--- EXAMINED PER DISPOSITION OF NCR # INSTRUMErT NOZZLE TO SAFE END B-F PT LP-LIM-001V3 R1 X--- 97 00484. (A1081930) (AZ. O DEG) B5.20 UT-45S ITT-LIM-102VD R0 X--- 12C, 316 '2", 4 00/0 PPV-APP 'REF. DWG. NO. XI-PPV-1TN fM1291 ) 602150 RPV-11N N129 VTG-3 MAG-CG-401 R8 X- -- EXAMINED PER DISPOSITION OF NCR # INSTRUMENT NOZZLE TO SAFE END BF PT LP-LIM-001V3 R1 X- -- 97-00484. (A1081930) (AZ, 200 DEG) B5.20 UT-45S UT-LIM-102VO R0 X- -- 15C, 316'2", 400/200 PPV-APP IREF. DWG. NO. XI-P PV-IIN f N12C) ) 602160 RPV IIN N12C VT-3 MAG-CG-401 R8 X--- EXAMINED PER DISPOSITION OF NCR # INSTRUMEN'T NOZZLE TO SAFE END B-F PT LP-LIM-001V3 R1 X- -- 97-00484. (A1081930) (AZ. 100 DEG) B5.20 UT-45S LTT-LIM-102VD R0 X.-- 16C, 316'2', 400/100 RPV-APP IPEF. DWG. NO XI-RPV-IIN rN12D)) 603170 RPV-11N N12D VT 3 MAG-CG-401 R8 X- -- EXAMINED PER DISPOSITION OF NCR # INSTRUMENT NOZZLE TO SAFE END B-F PT LP-LIM-001V3 R1 X. -- P7-00484. (A1081930) (AZ. 280 DEG) B5.20 UT-458 (TT LIM-102VO R0 X.--
. DATE 08/01/90 LIMERICK GENERATING STATION UNIT 1 PAGE: 41
{ REVISIONS. 1. INSERVICE INSPECTION SUP94ARY REPORT j l SECOND IlfrERVAL, FIRST PERIOD, FIRST OCTTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS i NR R j ASME OEGE SEC. XI RCEP SUDNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO. METHOD PROCEDURE CRMR REMARKS l ....... .............................. ....... .......... ................ .... ......................................... RPV-APP (REF. DWG. NO. XI-RPV-11N (N16 A) )
'602180 RPV-11N N16A VT-3 MAG-CG-4 01 d8 - X-..
1 EXAMINED PER DISPOSITION OF NCR # INSTRIMENT NOZZLE TO SAFE END B-F 97-00484. (A1081930) } (AZ. D DEG) 95.20 13C, 296' 9", 4 00/0 i I ( RPV-APP (REF. DWC. NO, XI-RPV-1TN fN16B)) 603190 RPV.11N N168 VT 3 MAG-CG-401 R8 X-*- EXAMINED PER DISPOSITION OF NCR N ! 2NSTRUMENT NOZZLE TO SAFE END BF 97-00484.
' (A1081930)
(AZ. 200 DEC) 85.20 l 15C, 296'9*, 400/200 f^ i l RPV-APP (REF. DWO. NO. XI-RPV-IIN (N16C)) I l i-l603300 RPV-11N N16C VT-3 MAG.CG-401 R8 X--- EXAMINED PER DISPOSITION OF NCR # [ INSTRUMENT NOZZLE TO SAFE END B-F 97 00484. (A1081930) (AZ.100 DEC) 95.20 10C, 296'9", 400/100 l I RPV-APP fREF.'DWG. NO. XI-R PV-11N f N16D) ) 603310 RPV.IIN N16D VT 3 MAG-CG-401 R8 X.-- EXAMINED PER DISPOSITION OF NCR # INSTRUMENT NOZZLE TO SAFE END B-F 97-00484. 1 (A10819301 ' (AZ. 280 DEG) .B5.20 11C,296 ' 9",4 00/2 8 0 4 RHR fREF, DWG. NO. 01-04) l '603230 DCA-318-2 N17A PT LP-LIM-001V3 R1 X .- (CC176973) SAFE END TO NOZZLE (AL, 45 B-F+ tTT-45S UT-LIM-209V1 RO X-DEG) B5.10 tTT-45RL UT-LIM-209V1 R0 ..X-13C, 297'3', 400/45 UT-60RL UT-LIM-209V1 RO --X. ITf-35KL tTT-LIM-209V1 R0 . X-l ___.____L_____________._.___ _ _ _ . _ _ _
DATE: 08/01/98 LZMERICK GENERATING STATION UNIT 1 PAGE: 42 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC, XI RCEP SU>9%RY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RHR (RitF . DWG. NO. 01-04) 602330 DCA-318-2 N17A UT-45S UT-LIM-209V1 R0 . .X. EXAMINED PER AUG-01, NRC GL 88 01, SAFE END TO NOZZLE (AZ. 45 N/A+ UT-45RL UT-LIM-209V1 R0 ..X. ItrTERGRANULAR STRESS CORROSION CRACXING. DEG) N/A UT-60RL UT-LIM 209V1 R0 --X- (C0176973) 12C, 297'3*, 400/45 VT-35RL UT-LIM-209V1 R0 ..X-603331 DCA-318-2 N17A UT-4 5S Ur-LIM-209V1 RO - -X- EXAMINED PER AUG-07, SIL 455, SAFE END TO NOZZLE (AZ. 45 N/A+ UT-45RL UT-LIM-209V1 RO ..X. RECOPf4ENDATION FOR ADDITIONAL ISI AF DEG) N/A UT-60RL UT-LIM-209V1 R0 ..X. ALICY 182 NOZZLE WELDMENTS, (C0176973) 12C, 297'3", 400/45 UT 35RL UT-LIM-209V1 R0 --X. 603340 DCA 318 2 FW1 PT LP-LIM-001V3 R1 X... (C0176973) 12" PIPE TO SAFE END (AZ 45 B-F+ UT-45S GE-UT-225V3 RO -.X. DEG) B5.130 UT-45RL CE-UT-225V3 R0 - .X-12C, 297'3", 400/45 G02341 DCA-318 2 FW1 LU PT LP-LIM-001V3 R1 X--- (C0176973) 12" PIPE SEAM B-J UT-45S GE-UT-225V3 RO - .X. 12C, 297'3', 400/45 B9.12 602342 DCA-318-2 FW1 ITT-4 58 GE-tTT-22 5V3 R0 .-X- EXAMINED PER AU3-01, NRC GL 88 01, 12' PIPE TO SAFE END (AZ. 45 N/A+ UT.4 5 RL GE-UT-225V3 RO -
-X- INTERGRANULAR STRESS CORROSION CRACXING.
DEG) N/A (C0176973) 12C, 297'3*, 400/45 RHR (REF. DWO. NO. 01-09Al 602250 DCA 318-1 N179 PT LP-LIM-001V3 R1 X--- (C0176978) SAFE END TO NOZZLE (AZ.135 B-F+ tTT-4 5S UT-LIM-209V1 RC X... DEG) B5.10 UI-45RL UT-LIM-209V1 R0 4 -X-16C, 297'3',' 400/135 UT-60RL ("T-LIM-209V1 RO X-.- UT-35RL UT-LIM-209V1 R0 . -X-003360 DCA-318-1 N17B UT-45S UT LIM-209V1 R0 X- .- EXAMINED PER AUG-01, NRC GL 88-01, SAFE END TO NOZZLE (AZ, 135 N/A. UT-45RL UT-LIM-209V1 RO - -X* INTERGRANULAR STRESS CORROSION CRACXING. DEG) N/A UT-60RL 'UT. LIM-209V1 R0 X--- (C0176978) 16C, 297'3*, 400/135 UT-35RL UT-LIM-209V1 R0 - -X-
DATEt , 08/01/98 LIMERICK CENERAT2NG STATION UNIT 1 PAGEt 43 REVIS$ O 1 INSERVICE INSPECTION SUIMARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STAWS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUpHARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM No METHOD PROCEDURE CAMR REMARKS
.......... ................ .+. ........................................
l l RHR fREF. DW3. NO. 01-09A) I i l L 603361 DCA-318-1 N178 W-45S tJT LIM-209V1 R0 X... EXAMINED PER AUG 07, SIL 455, SAFE END TO N024LE (AZ. 135 N/A+ UT-45RL ITT-LIM-209V1 R0 -X* REC 0fMENDATION FOR ADDITIONAL ISI 0F
. DEG) N/A ITT-60RL ITI-LIM 209V1 R0 X-.- ALLOY 182 NOZZLE WELDMENTS. (C0176978) 16C, 297'3', 400/135 LTT-35RL I UT-LIM-209V1 R0 ..X.
l 603370 CCA-318-1 FW1 PT LP-LIM-001V3 R1 X -- (C0176978) 13
- PIPE TO SAFE END (AZ. 135 B-F+ UT-455 GE-UT-225V3_RO --X-DEG) B5.130 LTf.45RL GE-UT-225V3 R0 X-.-
16C, 297'3', 400/135 l i '603371 DCA 318 1 FW1 LU PT LP-LIM-001V3 R1 X- - (C0176978) 12
- PIPE SEAM B-J UT-455 GE-ITT-225V3 R0 X --
16C, 297'3*, 400/135 89.12 603373 DCA-31E.1 FW1 UT-45S GE-tTf-225V3 R0 ..X- EXAMINED PER AUG-01, NRC CL 88-01, 13
- PIPE TO SAFE END (AZ. 135 N/A+ UT-45RL GE-tTT-225V3 R0 X- .-
INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0176978) 16C, 297'3*, 400/135 1 RHR (REF DWG. NO. 01-07Al i I 603380 CCA-318 4 N17D PT LP-LIM-001V3 R1 X-.- (C0176983) SAFE END TO NOZZI.E (AZ. 315 B-F+ UT-45S ITI-LIM-209V1 R0 - X-DEG) B5.10 UT-45RL ITT-LIM-209V1 RO - -X-11C,297'3",400/315 UT-60RL ITT-LIM-209V1 RO -.X-UT.35RL UT LIM-209V1 RD ..X-603320 CCA-318 4 N17D tTT-45S UT-LIM-209V1 R0 --X- EXAMINED PER AUG-01, NRC GL 88-01, SAFE END TO N0ZZLE (AZ. 315 N/A+ UT 45RL ITI-LIM-209V1 RD ..X. IlrTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A ITT-60RL UT+ LIM-209V1 R0 --X- (C0176983) l 11C,297'3',400/315 UT-35RL' UT-LIM-209V1 R0 ..X-l i 303331. DCA-318 4 N17D ITI-455 tTT-LIM-209V1 R0 ..X- EXAMINED PER AUG-07, SIL 455, j SAFE END TO N0ZZLE.LAZ. 315 N/A+ UT-45RL ITT-LIM 209V1 RO -.X- RECOMMENDATION FOR ADDITIONAL ISI 0F DEG) N/A UT-60RL UT LIM-209V1 R0 ..X. ALICY 182 N0ZZLE WELINENTS. (C0176983) 11C,2 97 ' 3 * ,4 00/315 UT-35RL UT-LIM-209V1 RO ..X-
\
DATES 08/01/98 L2MERICK GENERATING STATION UNIT 1 PAGE: 44 REVISION: 1 IFSEP/ ICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PHR 'REF. DWG. NO. 01 07A) 603330 DCA.318-4 FW1 PT LP-LIM.001V3 R1 X-.- (C0176983) 12' PIPE TO SAFE END (A2. 315 B.F+ (TT-4 5 S GE.UT-225V3 R0 .-X. DEG) B5.130 UT-45RL G2-UT.225V3 RC ..X-11C,297'3",400/315 603331 DCA-318 4 FW1 LU PT LP. LIM.001V3 R1 X--. (C0176983) 12' P!PE SEAM B-J ITT.4 5S GE.UT-225V3 R0 X.-- 11C. 2 97 ' 3 ",4 00/ 315 B9.12 602332 DCA-318 4 FW1 UT.455 GE.UT.225V3 RD ..X- EXAMINED PER AUG.01, NRC GL 88 01, 12' PIPE TO SAFE END (AZ. 315 N/A+ UT-45KL GE.UT.225V3 R0 *.X. INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0176983) 11C,297 ' 3 * ,4 0 0 /315 RPV f190 DEG.) (REF. DWG. NO. XI-BH 3) 603480 RPV STABILIZER BRACKET (180 DEG.) PT LP-LIM.001V3 R1 X..- DUE TO ACCESSIBILITY LIMITATIONS CAUSED BRACKET TO RPV WELD B-H VT+1 MAG.CG-4 07 R5 X... BY MIRROR INSULATION, PT EXAM LIMITED TO 16C 313'4', 400/180 BB.10 UPPER 29.1% OF INTEGRAL ATTACHMENT AND A 16C, 313'4", 400/180 SUPPLEMENTAL VT-1 PERFORMED CN LOWER 71.9% OF INTEGRAL ATTACHMENT. (C0177488) RPV f225 DEG.I (REF DWG. NO. XI-BH.3) 603490 RPV STABILIZER BRACKET 225DEG PT LP. LIM.001V3 R1 X .- (C0177489) BRACKET TO RPV WELD B.H VT-1 MAG.CG-407 R$ X --
. 15C, 313'4", 400/225 B8.10 PPV (770 DEG.) (REF DWG. NO. XI-BH-3) 602500 RPV STABILI2ER BRACKET (270 DEG.) PT LP-LIM.001V) R1 X--- DUF TO ACCESSIBILITY LIMITATIONS CAUSED BRACKET TO RPV WELD B.H VT.1 MAG-CG.407 R5 X.-. BY MIRROR INSULATION, PT EXAM LIMITED TO 15C, 313 '4', 400/270 B8.10 UPPER 28.1% OF INTEGRAL ATTACHMENT AND A 15C 313'4', 400/270 SUPPLEMENTAL VT.1 PERFORMED ON LOWER 71.9% OF INTEGRAL ATTACHMENT (C0177491)
l l DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 45 ' REVISIC2 1 INSERVICE INSPECTION SUPNARY REPORT j SECCND INTERVAL, FIRST PERIOD, FIRST OUTAGE l98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP l
SUMMARY
EXAMINATIONAREA CATGY EXAM EOOO ' NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE C e'. M R REMARKS RPV f315 DEG.) fREF DWG. NO. XT-BM-3) 602510 RPV STABILIZER BRACKET (315 DEG.) PT LP-LIM-001V3 R1 X--- (C0177492) ! BRACXET TO RPV WELD B-H VT-1 MAG-CG-407 R$ X--- 11C, 31384', 400/315 88.10 RR (PEF. DWG. NO. 07-02) i 602590 VRR-1RS-1B WB1 PT LP-LIM-001V3 R1 X.- - (C0176783) 28' PIPE TO SAFE END (AZ. 180 B-J+ UT-45S GE-UT-225V3 RO --X-DEG) 99,11 UT-45RL GE-UT-225V3 R0 --X-16C, 279'8', 400/180 l !602591 VRR 1RS-1B WB1 UT-455 GE-UT-225V3 RO --X- EXAMINED PER AUG-01, NRC GL 88-01, 28' PIPE TO SAFE END (AZ. 180 N/A+ UT 45RL GE-UT-225V3 R0 ..X- INTERGRANULAR STRESS CORROSION CRACKING. DEC) N/A l (C0176783) 16C. 279' B', 4 00/180 l 1 l602595 VRR-1RS-1B W81 LD PT LP-LIM-001V3 R1 X--- (C0176783) PIPE SEAM B-J UT-45S GE-UT-225V3 R0 X-- - 16 .277,400/180 89.12 I 602600 VRR-1RD-1B WB15 PT LP-LIM-001V3 R1 X--- (C0176710) 12' PIPE TO SAFE END (A2. 30 B-J+ UT-455 GE-UT-225V3 R0 --X-DEG) 89.11 UT-45S GE-UT-225V3 RO --X-12C, 281'4', 400/30 l602601 VRR-1RD-1B WB15 UT-455 GE-UT-225V3 R0 .-X- EXAMINED PER AUG-01, NRC CL 88-01, 12' PIPE TO SAFE END (AZ. 30 N/A+ UT-45S GE UT 225V3 R0 ..X- INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0176710) 12C, 2 81'4 * , 400/30 602603 VRR-1RD-1B WB15 LU PT LP-LIM-001V3 R1 X--. (C0176710)
' PIPE SEAM B-J UT-45S GE-UT-225V3 R0 X- --
12 .277,400/30 B9.12 l
DATER- 08/01/98 LIMERICK GENERATING STATI C CET 1 PAGE: 46 REVISION: 1 INSERVICE INSPECTION SUtetARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) { CLASS 1 CAUEP STATUS COMPONENTS I l NR R ASME OEGE SEC. XI RCEP SUM 4ARY EXAMINATION AREA CATGY EXAM EOOO N'JMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RR (REF. DWG. NO. 07-02) 603630 VRR-1RD-1B WB18 PT LP. LIM-001V3 R1 X *- (C0176723) 12* PIPE TO SAFE END (AZ. 120 B-J+ UT-455 GE-UT-225V3 R0 .-X. DEC) 89.11 UT-455 GE-UT-225V3 R0 --X. 16C, 281'4", 400/120 603631 VRR-1RD 18 WB18 UT-45S GE-UT-225V3 R0 --X. EXAMINED PER AUG 01, NRC GL 88 01, 12" PIPE TO SAFE END (AZ. 120 N/A+ UT-45S GE-UT-225V3 RC ..X. INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0176723) 16C, 281'4', 400/120 603035 VRR-1RD-1B WB18 LU PT LP-LIM-001V3 R1 X--. (C0176723) PIPE SEAM B-J UT-45S GE-UT-225V3 R0 X-- . 16 ,277,400/120 B9.12 ER (REF . DWG . NO. 07-01) 603650 VRR-1RD 1A WA15 PT LP-LIM-001V3 R1 X- . . (C0176739) 12" PIPE TO SAFE END (A2. 210 B-J+ UT-455 GE-UT-225V3 R0 .-X-DEG) 89.11 UI-45S GE-UT-225V3 R0 .-X-15C, 281'4", 4 00/210 602651 VRR-1RD-1A WAIS UT-45S GE-UT-225V3 RO -.X. EXAMINED DER AUG-01. NRC GL 80 01, 12* PIPE TO SAFE END (AZ. 210 N/A+ UT-455 GE-UT-225V3 R0 . - X -' IlfTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0176739) ISC, 281'4', 400/210 603655 VRR-1RD-1A WAIS LU PT LP-LIM-001V3 R1 X-- . (C0176739) PIPE SEAM B-J UT-4 5S GE-UT-225V3 R0 1--- 15 ,277,400/210 B9.12 603660 VRR-1RD-1A WA16 PT LP-LIM-001V3 R1 X-. - (C0176747) 12' PIPE TO SAFE END (AZ. 240 B-J+ UT-45S GE-UT-225V3 RO --X-DEG) B9.11 UT-45S GE-UT-225V3 R0 -.X-15C, 281'4 *, 400/240
7. l , DATE: 08/01/98 LIMERICX CENERATING STATION UNIT 1 PACE: 47 ! REVIEION: 1 INSERVICE INSPECTION SID84ARY REPORT l SECOND INTERVAL, FIRST PERIOD, FIRST Ot? TACE (98RFI CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP l
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENT!rICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l .....- .............................. ....... .......... ................ .. . . PR (REF. DWG. NO. 'TF - 01 ) 602661 VRR-1RD-1A WA16 UT-45S CE-tTT-225V3 RO --X- EXAMINED PER AUG-01, NRC GL 88-01, 12" PIPE TO SAFE END (AZ. 240 N/A+ ITT-4 5S CE UT-225V3 RO --X. ' INTERGRANULAR STRESS CORROSION CRACKING. DEG) N/A (C0176747) 15C, 281'4", 400/240 , t 602665 VRR-1RD-1A WA16 LU PT LP-LIM-001V3 R1 X--- (C0176747) PIPE SEAM B-J UT-45S GE-UT-225V3 R0 X-15 ,277,400/240 B9.12 602670 VRR 1RD-1A WA17 PT LP-LIM-001V3 R1 X--- (CG176751) 12" PIPE TO SAFE END lAZ. 270 B-J+ ITT-4 5S GE-UT-225V3 R0 -X-DEG) 89.11 UT-45S GE-tTF-225V3 RO --X-15C, 281'4', 400/270 602671 VRR-1RD-1A idA17 UT-45S CE-tTT-225V3 R0 --X- EXAMINED PER AUG-01, NRC GL 88-01, 12" PIPE TO SAFE END (AZ. 270 N/A+ UT-45S GE-VI-225V3 R0 --X- INTERGRANULAR STRESS CORP.OSION CRACXING. DEG) N/A (C0176751) 15C, 281'4', 400/270 l602675 VRR-1RD-1A WA17 LU PT LP-LIM-001V3 R1 X -- (C01767511 PIPE SEAM B-J UT-45S CE-UT-225V3 R0 X--- 15 ,277,400/270 B9.12 MS (REP. f5WG . NO. 03-04) !602740 APE-1MS-LC N3C MT MT-LIM-001VI R2 X--- (C01767661 l NOZZLE TO SAFE END (AZ. 252 B-J UT-45S UT-LIM-106VD R0 X- - - !' DEG) B9.11 15C, 321'1*, 400/252 l l !602750 APE-1MS-LC WC01 MT MT-LIM-001V1 R2 X--- (C0176766) 26' SAFE END (AZ. 252 DEG) TO B-J UT-45S CE-UT-225V3 RO X--- 26" PIPE B9.11 17T-45S GE-UT-225V3 R0 X- - - 15C, 321'1', 4 00/252
DATE: 08/05/98 LIMERICX CENERATING STATION UNIT 1 PAGEs 48 RE5J2SION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTWRVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS MS (PEF. DWG. No. 03-04) 603760 APE-1MS-LD N3D MT MT-LIM-001V1 R2 X. .. (C0177354) NO221.E TO SAFE END (A2. 288 B-J ITT-4 5S UT-LIM-209V1 R0 X- -- DEG) B9.11 11C,321'1*,400/288 603770 APE-1MS-LD WD01 MT MT-LIM-001V1 R2 X.-- (C0177354) 26' SAFE END (A2. 288 DEG) TO B-J UT-45S GE-UT-225V3 RC X--- 26' PIPE B9.11 UT-45S GE-UT-225V3 R0 X.- . 11C,321'1*,400/288 {PV-APP (REF, bWG NO, XI-PPV-IINI 603050 DCA-308-J1 W1 PT LP-LIM-001V3 R1 X--- INFORMATIONAL ITT EXAMINATION PERFORMED SAFE END TO 2' X 1* REDUCING BJ ITT-4 5S UT-LIM-102VO R0 X--. PER NCR # 97-00484. (C0177525) INSERT (AZ. O DEG) B9.40 12C, 316 '2', 4 00/0 69J060 DCA-194-J1 W1 PT LP-LIM-001V3 R1 X-- - INFORMATIONAL tTT EXAMINATION PERFORMED SAFE END TO 2' X 1" REDUCING B-J UT-45S UT-LIM-102VO RO X-- - PER NCR # 97-00484. (C0177526) INSERT (A2. 200 DEGI B9. 4 0 15C, 316'2', 400/200 (03070 DCA-307.J1 W1 PT LP-LIM 001V3 R1 X-- - INFORMATIONAL UT EXAMINATION PERFORMEL SAFE END TO 2' X 1* REDUCING BJ UT-45S (TT-LIM-102VO R0 X- -- PER NCR # 97-00484. (C0177527) INSER*' (12. 100 DEG) B9.40 IEC, 316.'2", 400/100 603080 DCA-193-J1 W1 PT LP-LIM-001V3 R1 X. .. INFORMATIONAL UT EXAMINATION PERFORMED SAFE END TO 2" X la REDUCING B-J UT-45S UT-LIM-102VD R0 X. -- PER NCR # 97-00484. (C0177528) INSERT (A2. 280 DEG) B9.40 11C,316'2",400/280 RPV ' PEF. DWG. NO, XI-BN-41 603135 ACCESS HOLE COVER (0 DEG) VT-3 VT-LIM-202R2 R0 X- -. (C0177494) COVER & WELD B N-1 R'I, 276'4", O A2 B13.10
l l l l DATE:. 08/01/98 LIMERICK CENERATING OTATI O UNIT 1 PAGE: 49 REVISIGs 1^ INSERVICE INSPECTION SUINARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) ! CLASS 1 CAUEP STATUS COMPONENTE NR R ME OEGE
- SEC. XI RCEP SIM4ARY EXAMINATION AREA CATGY EXAM EOOO ,
NUPEER IDENTIFICATION ITEM No METHOD PROCEDURE CRMR REMARKS l i i RPV (REF. DWO. NO. XI-BN-41 r i C03136= ACCESS HOLE COVER (180 DEG) VT-3 VT-LIM-202R2 R0 X-.- (C0177494) COVER & WELD BN1 l RXI, 276'4', 180 AZ B13.10 I i RPV (REF. DWG, NO. XI-BN) l 003130 SHROUD ANNULUS VT 3 VT-LIM-202R2 RO' =X-- DEBRIS FOUND: PIECE Of METAL SURFACE B-N-1 APPROXIMATELY 2 AND 1/2' BY 4 AND 1/2' ( RXI,.276'-300'. B13.10 BY 1/2*J NUT APPROXIMATELY 9/16". BOTH' RXI, 276'.-300' OBJECTS WERE REMOVED, SEE AR N A1145674 FOR DETAILS, (C0177494) ; a q 003190 JET PUMP #1 (N2A) MVT-1 VT-11M-202R2 RO X... BASELINE EXAMINATION USING BWRVIP-41,
. JET PUMP ASSEMBLIES & WELDS B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 23 AZ B13.10 EVALUATION CUIDELINES*. (C0177494) i i !
RPV fREr DW3. NO. XI-RN-3 PG. 1.21 bO3310 JET PUMP #1 INST LINE.PENE WELD MVT 1 VT-LIM 202R2 R0 X... BASELINE EXAMINATION USING BWRVIP 41, I WELDS TO PENETRATION N8A B N+1+ ' JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 279', 105 AZ B13.10 EVALUATION CUIDELINES'. .(C0177494) p03330 JET PUMP 81 INST LINE MVT-1 VT-LIM-202R2 RO X. - EXAMINED PER AUG-10, "NON-Q REACTOR ! , ' WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERhAL COMPONENTS ! ANNIEUS N/A (FSAR TABLE 3.2 1)'. BASELINE. REI, 23 AZ EXAMINATION USING BWRVIP-41, " JET PUMP ASSEMBLY INSPECTION AND EVALUATION l GUIDELINES'. (C0177494) l f03331TSETPUMP#1INSTLINE MVT-1 VT-LIM-202R2 RO Xa .- EXAMINED PER AUG-12, SIL 420, j WELDS & BRACKETS-SHROUD N/A+ ' INSPECTION OF JET PtMP SENSING LINES". I l ANNULUS N/A BASELINE EXAMINATION USING BWRVIP-41, l:
' JET PUMP ASSEMBLY INSPECTION AND EVALUATION CU DELINES*. (C0177494)
DATE: 08/P1/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 50 REVISION: 1 INSERVICE INSPECTION Stht4ARY REPORT SECOND INTERVE, FIRST PERIOD, FIRST OtfrAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEO2 SEC. XI RCEP St>f4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (PEF. DWG. NO. XI-BN-4 PG. 1-!) 603230 JET PUMP #2 (N2A) MVT-1 VT-LIM-202R2 RO -X-- BASELINE EXAMINATION USING JET PUMP ASSEMBLIES & WELDS B-N-1+ BWRVIP-41,' JET PUMP ASSEMBLY INSPECTION RXI, 38 AZ B13.10 AND FLAW EVEUATION GUIDELINES". WEDGE RXI, 38 AZ MOVEMENT NOTED AND FOLLOWING JET PUMP DISASSEMBLY, A BASELINE EXAMINATION WAS PERFORMED 0 TACK WELDS. (00177494) RPV fREF. DWG. NO. XI-BN-3 PG. 1.2) l C03250 JET PUMP #2 INST LINE-PENE WELD MVT-1 VT-LIM-202R2 R0 X-.- BASELINE EXAMINATION USING BWRVIP-41, WELDS TO PENE"1tATION NSA B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 279', 105 A2 B13.10 EVALUATION GUIDELINES" (C01774 94 ) 603260 JET PUMP 42 INST LINE MVT-1 YT-LIM-202R2 R0 X..- EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACXETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)". BASELINE RXI, 38 A2 EXAMINATION USING BWRVIP.41, ' JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION , GUIDELINES". (C0177494) 603261 JET PUMP 82 INST LINE MVT 1 VT-LIM-202R2 RD X... EXAMINED PER AUG-12, 'SIL 420 WELDS & BRACKETS-SHROUD N/A+
- INSPECTION OF JET PUMP SENSING LINES".
ANNULUS N/A BASELINE EXAMINATION USING BWRVIP-41,
" JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION GUIDELINES'. (C01774 94 )
PPV (REF. DWG, NO. XI-BNN PG. 1) 603270 JET PUMPS 1&2 RISER BRACE ARM M7T-1 VT-LIM-202R2 R0 X.-. BASELINE EXAMINATION USING BWRVIP-41, SUPPORT PAD & BRACE TO RPV B-N-2 " JET PUMP ASSEMBLY INSPECTION AND FLAW WELDS B13.20 EVALUATION GUIDELINES". (C0177494) RXI, 23 & 38 AZ 603271 JET PUMPS 1&2 RISER BRACE ARM MVT-1 VT-LIM-202R2 RD X-.- BASELINE EXAMINATION USING BWRVIP.41, ASSEMBLY WELDS N/A
- JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 23 & 38 AZ N/A EVALUATION GUIDELINES *. REFERENCE SIL RXI, 23 & 38 AZ 551, ' JET PUMP RISER BRACE CRACKING .
WELDS RB-2C AND 2D Ante INACCESSIBLE.
DATE: 08/01/98 LIMERICK CENERATING STATION UNIT 1 PAGEt 51 r REVISIO: 1 INSERVICE INSPECTION SG HARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OLTTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC XI RCEP SUNMARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF. DWG. NO. XI-BN-4 PG. 1-5) I 603280 JET PUMP #3 (N28) kVT-1 VT-LIM-202R2 RO X-.. BASELINE EXAMINATION USING BWRVIP-41," JET PUMP ASSEMBLIES & WELDS B N-1+ JET PUMP ASSEMBLY INSPECTION AND RXI, 53 AZ B13.10 EVALUATION CUIDELINES" (C0177494) RPV (REF DWG NO. XI-9N-3 PG 1.2) 9 603300 JET PUMP #3 INST LINE.PENE WELD MVT.1 VT LIM 202R2 RO X.-. BASELINE EXAMINATION USING BWRVIP.41, WELDS TO PENETRATION N8A 9-N-1+
" JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 279', 105 AZ B13.10 EVALUATION CUIDELINES". (C0177494)
'603310 JET PUMP #3 INST LINE MYT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL IFTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1). BASELINE EXAMINATION RXI, 53 AZ USING BWRVIP-41, " JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION CUIDELINES" (C0177494) l i603311 JET PUMP #3 INST LINE MVT-1 VT-LIM-202R2 RD X-.. EXAMINED PER AUG-12, SIL 420, WELDS & BRACKETS SHROUD N/A+
" INSPECTION OF JET PUMP SENSING LINES".
ANNULUS N/A BASELINE EXAMINATION USING BWRVIP.41
" JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494)
RPV (REF. DWG. NO. XI-PN-4 PC. 1-5) I 6'J3330 JET PUMP,#4 (N2B) MVT-1 VT-LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP.41, JET PUMP ASSEMBLIES & WELDS B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW l RXI, 68 AZ B13.10 l EVALUATION GUIDELINES". (C0177494) !
)
I RPV (REF. DWG. NO. XI-PN-3 PG. 1,2) l 603340 JET PUMP #4 INST LINE-PENE WELD MVT+1 VT-LIM-202R2 R0 X. .. BASELINE EXAMINATION USING BWRVIP-41, CELDS TO PENETRATION N8A B.N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 279', 105 A2 B13.10 EVALUATION CUIDELINES" (C0177494) { i i 1
DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGE: 52 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRdT PERIOD, FIRST OtTTAGE (96RF) CLASS 1 CAUEP STATUS COMPONEhTS NR R ASME OECE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EX.AM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF DWG. No. XI-BN-3 PG. 1.2) 603350 JET PUMD #4 INST LINE MVT-1 VT-LIM-202R2 R0 X-.- EXAMINED PER AUG 10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL IhTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)'. BASELINE RXI, 68 AZ EXAMINATION USING BWRVIP.41, ' JET PUMP ASSEMBLY INSPECTION AND FIAN EVALUATION GUIDELINES *. (C0177494) 603351 JET PUMP #4 INST LINE MVT-1 VT-LIM-202R2 R0 X--. EXAMINED PER AUG-12, SIL 420, WELDS & BRACKETS. SHROUD N/A+ " INSPECTION OF JET PUMP SENSIIR3 LINES" ANNULUS N/A BASELINE EXAMINATION USING BWRVIP-41,
' JET PUMP ASSEMBLY INSPEC"TIOtf AND FLAW EVALUATION GUIDELINES" (C0177494)
PPV fpFF. DWG. NO XI-BNM PG. 11 603360 JET PUMPS 3&4 RISER BRACE ARM MVT-1 VT-LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP.41, SUPPORT PAD 5 BRACE TO RPV B-N-2 " JET PUMP ASSEMBLY INSPECTION AND FLAW WELDS B13.20 EVALUATION GUIDELINES" (C0177494) RXI, 53 & 67 AZ 603361 JET PUMPS 364 RISER BRACE ARM MVT-1 VT-LIM-202R2 R0 X-.. BASELINE EXAMINATION USING BWRVIP-41, ASSEMBLY WELDS N/A ' JET PUMP ASSEMBLY INSPECTION AND FLAN RXI, 53 & 67 AZ N/A EVALUATION CUIDELINES' REFERENCE SIL RXI, 53 6 67 AZ 551, " JET PUMP RISER BRACE CRACKING
- WELDS RB-2C AND 2D ARE INACCESSIBLE.
(C0177494) PPV fREF. DWG. NO. XI-BN-4 PG. 1-51 603370 JET PUMP #5 (N2Cl MVT-1 VT-LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP-41, JET PUMP ASSEMBLIES & WELDS B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 83 AZ B13.10 EVALUATION CUIDELINES" (C0177494) PPV fPFF. DWG. NO. XI-BN-3 PG 1.21 603390 JET PUMP #5 INST LINE.PENE WELD MVT-1 VT LIM-202R2 RO X-.. BASELINE EXAMINATION USING BWRVIP.41, WELDS TO PENETRATION NBA B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 279', 105 AZ B13.10 EVALUATION GUIDELINES" (C0177494)
DATE: 08/01/98 ?IMERICK GENERATING STAT""JN UNIT 1 PAGEs 53 REVISION: 1 INSERVICE INSPECTION SiH'7*.a REPORT SECOND INTERVAL, FIRST PERIOD, FIPST Ot7TAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CAIUY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF. DWG NO. XI-BN-3 PC. 1.2) 603400 JET PUMP #5 INST LINE MVT-1 VT-LIM-202R2 R0 X.-- EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS' N/A (FSAR TABLE 3.2 1). BASELINE EXAMINATION RKI, 83 AE USING BWRVIP-41, ' JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION jl GUIDELINES" (C0177494) l 603401 JET PUMP 85 INST LINE MVT-1 VT-LIM 202R? R0 X- . EXAMINED PER AUG-12, SIL 420 j WELDS & BRACKETS-SHROUD N/A+ l
" INSPECTION OF JET PUMP SENSING LINES".
ANNULUS N/A B1.SELINE EXAMINATION USING BWRVIP-41.
" JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATICN GUIDELINES". (C01774 94 )
RPV tPEF. DWG. NO. XT-BN-4 PC. 1-51 603410 JET PUMP #6 (N20) MVT-1 VT-LIM-202R2 R0 X- .. BASELINE EXAMINATION USING BWRVIP-41, JET PUMP ASSD4BLIES & WELDS B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 98 AE B13.10 EVALUATION GUIDELINES". LIMITED ACCESS RXI. 98 AE TO WELDS AD-1,2 & 4 AND OF-2. (C0177494) PPV (REF. DWG, NO. XI-BN-3 PG. 1.2) ' 603430 SET PUMP #6 INST LINE-PENE WELD MVT-1 VT-LIM-202R2 R0 X--- EASELINE EXAMINATION USING BWRVIP-41. WELDS TO PENETRATION N8A B-N-1+ ' JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 279', 105 AE B13.10 EVALUATION GUIDELINES". (C0177494) 603400- JET PUMP #6 INST LINE M7T-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONCNTS ANNULUS N/A (FSAR TABLE 3 2-1)*. BASELINE RXI, 98 AE i EXAMINATION USING EWRVIP-41, " JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494)
I DATE:, 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE4 54
. REVZS208fa 1 INSERVICE INSPECTION SUPMUtY REPORT SECOND DrTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF)
CLASS 1 CAUEP STATUS COMPONENTS l i' NR' R ASME OEGE SEC. XI RCEP SUDetARY EXAMINATION AREA CATGY- EXAM EOOO NLMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF. DWG. NO. XI-BN.3 PG. 1.2) 603441' JET PUMP $6 INST LINE MVT-1 VT. LIM.202R2 R0 X..- EXAMINED PER AUG-12, SIL 420, WELDS & BRACKETS. SHROUD N/A+ ' INSPECTION OF JET PLMP SISNING LINES". ANNULUS N/A BASELINE EXAMINATION USING BWRVIP.41,
' JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION GUIDELINES'. (C0177494)
RPV (REF. DWG. NO. XI-BNN PG. 1) 603450 JET PUMPS S&6 RISER BRACE ARM MVT-1 VT. LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP.41,
' SUPPORT PAD & BRACE TO RPV B-N-2 " JET PUMP ASSEMBLY INSPECTION AND FLAW WELDS B13.20 EVALUATION GUIDELINES". (C0177494)
RXI, 83 6 97 AE 603451 JET PUMPS 566 RISER BRACE ARM MVT.1 VT LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP.41, ASSpeLY WELDS N/A ' JET PUMP ASSEPSLY INSPECTION AND FLAW RXI, 83 & 97 A2 N/A EVALUATION CUIDELINES', REFERENCE SIL RXI, 83 & 97 AZ 551, " JET PUMP RISER BRACE CRACKING". WELDS RB 2C & 2D ARE INACCESSIBLE. (C0177494) RPV (REF. DWG. NO. XI-BN-4 PG. 1 5) 603460 JET PUMP $7 (N2D) MVT-1 VT. LIM.202R2 RD X... BASELINE EXAMINATION USING BWRVIP.41, JET PLMP ASSEMBLIES & WELDS B.N.1+ ' JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 113 AZ B13.10 EVA!UATION GUIDELINES" LIMITED ACCESS RXI, 113 A2 TO WELDS AD.1,2 & 4 AND DF.2. (C0177494) RPV (REF. DWG. NO. XI-BN-3 PG. 1.2) 603480 JET PLMP $7 INST LINE.PENE WELD MVT-1 VT. LIM-202R2 R0 X- . BASELINE EXAMIATION USING BWRVIP.41, l- WELDS TO PENETRATION NSA B.N.1+ " JET PUMP ASSEMBLY INSPECTION AND FLAW RXI,'279', 105 A2 213.10 EVALUATION GUIDELINES'. (C01774 941 l'
l i DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE 55 REVISIONA 1 INSERVICE INSPECTION St> NARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (REF DWG. NO. XI-BN-3 PG, 1,2) 603490 JET PUMP #7 INS *" LINE MVT-1 VI-LIM-202R2 RO X--- EXAMINED PER AUG-10, 'NON-Q REACTOR WEIDS & BRACYETS SHROUD N/A+ PRESSURE VESSEL INTERhAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)'. BASELINE RXI, 113 AE EXAMINATION USING BWRVIP-41, " JET PUMP ASSEMBLY INSPECTION AN" FLAW EVALUATION GUIDELINES * (C0177494i 603491 JET PUMP #7 INST LINE MVT-1 VT-LIW 202R2 R0 X--- EXAMINED PER AUG-12, SIL 440, CELDS & BRACKETS-SHROUD N/A+
' INSPECTION OF JET PUMP SENSING LINES *.
ANNULUS N/A BASELINE EXAMINATION USING BWRVIP-41,
' JET PUMP ASSEMBLY INSPECTION AND FLAN EVALUATION GUIDELIN6S*. (C0177494)
PPV (RFF. DWG NO. XI-BN-4 PG. 1 5) 603500 JET PUMP #8 (N2D) MVT-1 VT-LIM-202R2 RO X--- BASELINE EXAMINATION USING BWRVIP-41, I JET PUMP ASSEMBLIES & WELDS B.N-1+ ' JET PUMP ASSEMBLY INSPECTION AND FIAW RXI, 128 AE B13.10 EVALUATION GUIDELINES" (C0177494) I I RPV (REF. DWG NO XI-BN-3 PG. 1.21 i 603520 JET PUMP #$ INST LINE-PENE WELD MVT-1 VT-LIM-202R2 R0 X- -- BASELINE EXAMIANTION USING BWRVIP-41. CELDS TO PENETRATION N8A B-N-1+
- JET PUMP ASSEMBLY INSPECTION AND FLAW RKI, 279', 105 AE B13.10 EVALUATION GUIDELINES" (C0177494) 103530 JET PUMP,#8 INST LINE MVT-1 VT-LIM-202R2 R0 X--- EXAMINED PER AUG-10, 'NON-Q REACTOR t ELDS & BRACXETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3,2-1)". BASELINE
.RXI, 129 AE EXAMINATION USING BWRVIP-41, ' JET PUMP ASSEMBLY INSPEC"f20N AND FLAW EVALUATION GUIDLINES*. (C0177494) 603331 JET PUMP #$ INST LINE MVT-1 VT-LIM-202R2 R0 X--- EXAMINED PER AUG-12, SIL 420, WELDS & BRACKETS-SHROUD N/A+ ' INSPECTION OF JET PUMP SENSING LINES',
ANNULUS N/A BASELINE EXAMINATION USING BWRVIP-41,
' JET PUMP ASSEMBLY INSPECTION AND FLAW EVALUATION GUIDELINES". (C01774 94 )
i l l'u__________.___..___
DATE: 08/01/98 L8MER3CK GENERATING STATION (Bf!T 1 PAGE: 56
, RE'f!SION: 1.- - INSERVICE INSPECTION SIM4ARY REPORT
' SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF)
CLASS 1 CAUEP STAIUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXAM - EOOO
. NUMBER IDElff!FICATION ' ITEM NO METHOD PROCEDURE CRMR REMARKS 1
RPV (REF. DWG. NO. XI-BNN PG. 1)
'603540, JET PUMPS 7&8 RISER BRACE ARM MVT-1 VT-LIM-202R2 R0 X-.. BASELINE EXAMINATION USING BWR* IIP-41,
. SUPPORT PAD & BRACE TO RPV B-N-2 ' JET PUMP ASSEMBLY INSPECTION AND FLAW WELDS B13.20 EVALUATION GUIDELINES". (C0177494)
RXI, 113 & 128 A2 603541 JET PUMPS 7&8 RISER BRACE ARM MVT-1 VT* LIM-202R2 RO X-.. BASELINE EXAMINATION USING BWRVIP-41, ASSEMBLY WELDS N/A ' JET PUMP ASSEMBLY INSPECTION AND FLAW . RXI, 113 & 128 A2 N/A EVALUATION GUIDELINES'. REFERENCE SIL
,RXI, 113 & 124 AE 551,
- JET PUMP RISER BRACE CRACXING".
WELDS RB-2C & 2D ARE INACCESSIBLE. (C0177494) RPV-(REF, DWG. NO. XI-BN-4 PC, 1-6) 603350 JET PUMP 89 (N2E) MVT.1 VT-LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP-41, JET PUMP ASSEMBLIES & WELDS B-N-1+
- JET PIMP ASSEMBLY INSPECTION AND FLAW
'RXI, 143 A2 B13.10 EVALUATION GUIDELINES". (C0177494)
RPV (REF, DWG, NO. XI-BN-1 PC. 1.2) -603570 JET PUMP 89 INST LINE-PENE WELD MVT.1 VT LIM.202R2 R0 X-.. BASELINE EXAMINATION USING BWRVIP-41. WELDS TO PENETRATION N8A B-N-1+ " JET PUMP ASSEMBLY INSPECTION AND RXI. 279', 105 AE B13.10 EVALUATION GUIDELINES". (C0177494) .'603380 JET PtNP 89 INST LINE MVT 1 VT-LIM-202R2 R0 X- .. EXAMINED PER AUG-10, "NON Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)* BASELINE RXI, 143 AE EXAMINATION USING BWRVIP-41, ' JET PUMP ASSEMBLY INSPECTION AND EVALUATION GUIDELINES" (C0177494) 603581 JET PIMP 89 INST LINE MVT 1 VT-LIM-202R2 R0 X.... EXAMINED PER AUG.12, SIL 420 WELDS & BRACKETS-SHROUD N/A+ " INSPECTION OF JET PUMP SENSING LINES". ANNULUS N/A BASELINE EXAMINATION USING BWRVIP-41,
' JET PUMP ASSEMBLY INSPECTION AND EVALUATION GUIDELINES". (C0177494)
-DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PACE: 57 j ret!ISIODs 1 INSERVICE INSPECTION SUlHARY REPORT SECOND INTERV E , FIRST PERIOD, FIRST OUTAGE (98RF)
CLASS 1 CAUEP STATUS COMPCNENTS AR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV fREF. DWO. NO. XI-RN-4 PC. 1-5) 603590 JET PUMP #10 (N2E) MVT-1 VT-LIM-202R2 R0 X--- BASELINE EXAMINATION USING BWRVIP-41, JET PUMP ASSEMBLIES & WELDS B-N-1+
' JET PUMP ASSEMBLY INSPECTION AND RII, 158 AZ B13.10 EVALUATION GUIDELINES *. (C0177494)
PPV (RFF DWG. NO XI-BN-3 PG. 1.2) 603610 JET PUMP #10 INST LINE-PENE WELD MVT-1 VT-LIM 202R2 R0 X..- BASELINE EXAMINATION USING BWRVIP.41, j WELDS TO PENETRATION NBA B N-1+
' JET PUMP ASSEMBLY INSPECTION AND RII, 279', 105 AZ B13.10 EVE UATION GUIDELINES". (C0177494) 603630 JET PUMP #10 INST LINE MVT-1 VT-LIM-202R2 R0 X-.- EXAMINED PER AUG-10, *NON-Q REACTOR WELDS & BRACXETS SHROUD N/A+
PRESSURE VESSEL INTERNE COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)" BASELINE RXI, 158 AZ EXAMINATION USING BWRVIP-41, ' JET PUMP ASSEMBLY INSPECTION AND EVALUATION GUIDELINES *_ (C01774 94 ) 603631 JET PUMP #10 INST LINE MYT 1 VT-LIM-202R2 R0 X- - EXAMINED PER AUG 12, SIL 420 WELDS & BRACKETS-SHROUD N/A+ ' INSPECTION OF JET PUMP SENSING LINES" ANNULUS N/A l BASELINE EXAMINATION USING BWRVIP-41,
" JET PUMP ASSEMBLY INSPECTION AND EVEUATION GUIDELINES'. (C0177494)
RPV fREF. DWG. FO. XI-BNN PC 1) 603630 JET PUMPS 9&10 RISER BRACE ARM MVT-1 VT-LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP-41, SUPPORT PAD & BRACE TO RPV B-N-2 ' JET PUMP ASSEMBLY INSPECTION AND WELDS B13.20 EVALUATION GUIDELINES *. (C0177494) RXI,143 & 157 AZ 603631 JET PUMPS 9610 RISER BRACE ARM MVT-1 VT-LIM-202R2 R0 X... BASELINE EXAMINATION USING BWRVIP-41. ASSEMBLY FELDS N/A ' JET PUMP ASSEMBLY INSPECTION AND FLAW RXI, 143 & 157 A2 N/A EVALUATION GUIDELINES'. REFERDiCE SIL RXI, 143 & 157 AZ 551, ' JET PUMP RISER BRACE CRACKING *, WELDS RB-2C & 2D ARE INACCESSIBLE. (C0177494)
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 58 REV2SION 1 INSERVICE INSPECTION SIM4ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RPEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS DPV fPEF DWG NO. XI-BN-141 004090 LPCI COUPLING (N17A) MVT-1 VT-LIM-202R2 R0 X--. BASELINE EXAMINATION USING BWRVIP.42, LPCI LOOP B B-N-1 'LPCI COUPLING INSPECTION AND FLAW RXI, 298', 45 AZ B13.10 EVALUATION GUIDELINES *. (C0177494) 604100 LPCI COUPLING (N17B) MVT-1 VT-LIM-202R2 R0 X--- BASELINE EXAMINATION USING BWRVIP-42, LPCI LOOP D B-N-1 *LPCI COUPLING INSPECTION AND FLAW RXI, 290', 135 AZ B13.10 EVALUATION GUIDELINES' (C01774 94 ) PPV (REF DWG NO. XI-9N-9 PG. 1) 604330 FEEDWATER SPARGER N4A VT-3 VT-LIM-202R2 R0 X..- EXAMINED PER AUG-10, 'NON-Q REACTOR SPARGER ASSEMBLY & (4) N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2 1) " . INCLUDED N0ZZLE RXI, 5-55 AZ BLEND RADIUS. (C0177494) 604531 FEEDWATER SPARGER N4A VT-3 VT-LIM 202R2 R0 X--- EXAMINED PER AUG-02, NUREG-0619, 'BWR SPARGER ASSEMBLY & (4) N/A+ FEEDWATER NOZZLE AND CRD RETUPJi LINE BRACKETS N/A NOZZLE CRACKING *. INCLt/DED N0ZZLE BLEND RXI, 5-55 AZ RADIUS. (C0177494) RPV (REF. DWG. No. XI-BNN PG. Il 604550 N4A SPARGER BRACKET (5 DEC) VT-3 VT-LIM-202R2 R0 X-.. (C0177(s4) BRACKET & WELD TO RPV B-N-2 RXI, 308', 5 AZ B13.30 604560 N4A SPARGER BRACKET (55 DEG) VT-3 VT. LIM-202R2 R0 X... (C0177494) BRACKET & WELD TO RPV B-N-2 RXI, 308', 55 AZ B13.30 PPV f9EF. DWG No. XI-BN-9 PG 11 600570 FEEDWATER SPARGER N4B VT-3 VT-LIM-202R2 R0 X--- EXAMINED PER AUG-10, 'NON-Q REA0 TOR SPARGER ASSEMBLY & (4 ) N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2-1" INCLUDED N0ZZLE RXI, 65-115 AZ BLEND RADIUS. (C0177494)
i DATER 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGEt 59 REVZS20N 1 INSERVICE INSPECTION SUPDIARY REPORT I \ SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS l l NR R ASME OEGE SEC. XI RCEP stb 9tARY EXAMINATION AREA CATCY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF. DWG. NO. XI-BN-9 PC. 11 , 604571 FEEDWATER SPARGER N4B VT 3 VT. LIM 202R2 RD X... EXAMINED PER AUG-02, NUREG-0619, 'BWR SPARGER ASSEMBLY & (4) N/A+ FEEDWATER NQZZLE AND CRD RETURN LINE BRACKETS N/A l NOZZLE CRACKING
- INCLUDED NOZZLE BLEND RKI, 65-115 AZ RADIUS. (C01774 94 )
l l ! RPV (REF. DWO. NO. XI-BNN PG. 11 $ l 604590 N4B SPARGER BRACKET 165 DEG) VT 3 VT-LIM-202R2 R0 X..- (C0177494) BRACKET & WELD TO RPV B-N-2 RXI, 308', 65 AZ B13.30 , l I i604600 N48 SPARGER BRACKET (115 DEC) VT-3 VT-LIM-202R2 R0 .X... (C0177494) i BRACKET & WELD TO RPV BN2 i RYI, 308', 115 AZ B13.30 i l RPV (REF. DWG. NO. XI BN-9 PG 11 l604610 FEEDWATER SPARGER N4C VT-3 VT. LIM 202R2 RD X .. EXAMINED FER AUG-10, 'NON-Q REACTOR SPARGER ASSEMBLY & . (4) N/A+ PRESSURE VESSEL IlfTERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2 1)". INCLUDED NQZZLE I l I RXI, 125-175 AZ BLEND RADIUS. (C0177494) ! l 1 I l604611 FEEDWATER SPARGER N4C VT-3 VT-LIM-202R2 R0 X... EXAMINED PER AUG-02, NUREG-0619, *BWR SPARCER ASS 1MBLY & (4) N/A+ FEEDWATER AND CRD RETURN LINE NOZZLE BRACKETS N/A CRACKING *, INCLUDED N0ZZLE BLEND RADIUS. RXI, 125 175 AZ (C0177494)
\
i i RPV (REF. DWO. NO XI-BNN PG, 1) l 600630 ~ N4C SPARGEk BRACKET (125 DEC) VT-3 VT LIM 202R2 R0 X-.. (C0177494) BRACKET & WELD TO RPV B-N-2 -l l RKI, 308', 125 AZ B13.30 l
~
DATE: 08/01/98 LEMERICX GENERATIC3 STATION (CET 1 PAGE: 60 RE'!!SIONs 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTA0E (98RF) CLASS 1 CADEP STATUS COMPONENTS l NR R ASME OEGE SEC. XI RCEP SIM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD' PROCEDURE CRMR REMARKS PPV (REF. DWG. NO. XI-PNN PG. Il 604640 N4C SPARGER BRACKET (175 DEG) VT.3 VT. LIM 202R2 R0 X... (C01774 94 ) BRACKET & NELD TO RPV B-N-2 RXI 308', 175 AZ B13.30 PPV (PEP. DWG. NO. XI-PN-12 PG. 11 604770 SURVEIL. SPECIMEN HLDR (30 DEG) VT.3 VT. LIM 202R2 R0 X... EXAMINED PER AUG-10, 'NON-Q REACTOR EMBRITTLEMENT SAMPLE HOLDER N/A+ PRESSURE VESSEL INTERNAL COMPONENTS RXI, 30 AZ N/A (FSAR TABLE 3.2 1)'. (C0177494) RPV (REF. DWG. NO. X!-BNN PG 1) 604780 SURV. SPECIMEN BRKT (30 DEG LOWER) VT-1 VT LIM-202R2 R0 X... (C0177494) BRACKET & WELD TO RPV B N.2 RXI, 290', 30 AZ B13.20 604790 SURV. SPECIMEN BRKT (30 DEC UPPER) VT-1 VT. LIM-202R2 R0 X... (C0177494) BRACKET & WELD TO RPV B-N-2 RXI, 299', 30 AZ B13.20 RPV fREP DWG. NO. XI-PN-12 PG. 1) 604800 SURVEIL. SPECIMEN HLDR (120 DEG) VT-3 VT-LIM-202R2 RD X-.. EXAMINED PER AUG-10, 'NON-Q REACTOR EMBRITTLEMENT SAMPLE HOLDER N/A+ PRESSURE VESSEL INTERNAL COMPONENTS RXI, 120 AZ N/A (FSAR TABLE 3.2 11'. (C0177494) PPV fREF. DWG. NO. XI-BNN PG 11 603850 $URV. SPECIMEN BRKT(120 DEG LWR) VT.1 VT-LIM-202R2 R0 X... (C0177494) BRACKET & WELD TO RPV B-N-2 RXI, 29 0 ', 12 0 AZ B13.20 604830 SURV. SPECIMEN BRKT(120 DEG UPR) VT-1 VT-LIM-202R2 R0 X- .. (C0177494) BRACKET & WELD TO RPV B-N-2 RXI, 299',120 AZ 813.20
DATE: 08/01/98 LIMERICE OENERAT8NG STATION UNIT 1 PAGE: 61 REVISICO 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS 1 CAUEP STATUS COMPONEtrTS NR R ASME OEGE SEC XI RCEP SU> NARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRHR REMARKS PPV (PEF. DWG NO. XI-BN-11 PG. 1) 604930 GUIDE RCD (O DEG) VT-3 VT-LIM-202R2 R0 X-.- EXAMIED PER AUG-10, "NON-Q REACTOR ROD, BRACKET & RCD FLANGE N/A+ EXI, O AE PRESSURE VESSEL INTERNAL COMPONENTS N/A (FSAR TABLE 3.2 1)". (C0177494) P P'? (REF. DWG. NO. XI-BNN PG. 1) 004930 GUIDE RCD (O DEG) VT-3 VT-LIM-202R2 R0 X--- (C01774 94 ) BRACKET & WELD TO RPV B-N 2+ RXI, 320', O AE B13.30 RP'! fREF. DWG. NO, XI-BN-11 l004960 STEAM DRYER VI-3 I VT-LIM-202R2 R0 .X-X EXAMINED PER AUG-10. "NON-Q REACTOR DRYER ASSY. WELDS. SURFACE & N/A+ PRESSURE VESSEL INTERNAL COMPONENTS LUCS N/A (FSAR TABLE 3.2-1)". EXAMINATION FF, 352', 700 REVEALED BROKEN RADIAL RESTRAINT STRAP ON THE 325 DEG LIITING LUG. STRAP REMOVED PER NCR 8 LG 98 00884. (C0177494) 304961 STEAM DRYER DRAIN CHANNEL WELDS VT-1 VT-LIM 202R2 R0 X.-- EXAMINED PER AUG-17 SIL 474, " STEAM VERTICAL & HORIZONTAL N/A+ DRYER DRAIN CHANNEL CRACKING" ATTACHMENT WELDS N/A (C0177494) ;
)
RPV (PEF. DWG. NO XI-PNN PG. 11 04970 STEAM DRYER DRACKET (4 DEG) VT-3 VT-LIM-202R2 R0 X.-- (C0177494) SUPPORT BRACKET & WELD TO RPV B-N-2 RX8, 310', 4 AE B13.30 04980 STEAM DRYER BRACKET (94 DEG) VT-3 VT-LIM-202R2 R0 -X - I ACCEPTABLE WEAR'NOTED ON BRACKET. SUPPORT BRACKET & WELD TO RPV B N-2 (C0177494) i RX3, 318', 94 AE B13.30 l J u_______.___...._.___- ---
DATE: 08/01/98 LIMERICK GENERATZNG STATION UNIT 1 PAGE: 63 REVISIONS 1 INSERVICE INSPECTION SUpmARY REPORT SECOND INTERVAL, FIRST PERIOD,-FIRST Ot7 RAGE (98RF) CLASS 1 CAUE* STATUS COMPONENTS l l NR R ASME OEGE
. SEC. XI RCEP StDNARY EXAMINATION AREA CATGY EXAM EOOO Nt24BER IDENTIFICATION. ITEM NO METHOD PROCEDURE CRMR REMARKS l
l 8tPV (REF. DWO. NO. XI-BNN PG. 11 604990. STEAM DRYER BRACKET (184 DEG) VT-3 VT. LIM-202R2 R0 X-.. (C01774 94 ) SUPPORT BRACKET & WELD TO RPV B.N.2 RXI, 310', 184 A2 B13.30
~
605000' STEAM DRYER BRACKET (274 DEC) VT.3 VT. LIM.202R2 R0 X... (C0177494) SUPPORT BRACKET & WELD TO RPV B.N-2 RXI, 318', 274 A2 B13.30 RPV (REF. DWG. NO. XI.BN.1 PG. 3) 605010' STEAM DRYER BRACKET (41.5 DEG) - VT.3 MAG.CG-4 07 R$ X..- (C0177494)
. HOLD DOWN BRACKET & WELD TO B.N.2 RPV B13.30 FF, 352', 700 605030 STEAM DRTER BRACKET (138.5 DEG) VT.3 MAG-CG.407 R5 X ..
(C0177494) HOLD DOWN BRACKET & WELD TO B.N.2 RPV B13.30 FF. 352', 700 603030 STEAM DRYER BRACKET (221.5 DEG) VT-3 MAG-CG-407 R5 X .- (C0177494)
' HOLD DOWN BRACKET & WELD TO B.N-2 RPV B13.30 FF, 352'i 700 RPV (REF. DWG. NO. XI.BN.1) 605040 STEAM DRYER BRACKET (318.5 DEC) VT.3 MAG.CG-407 R$ X... (C0177494)
HOLD CONN BRACKET & WELD TO B-N-2 RPV B13.30 FF, 352', 700 RPV fREF. DWG. NO. XI.BN.9) 695070 TOP CUIDE ASSEMBLY VT.3 VT. LIM-202R2 RC X... EXAMINED ACCESSIBLE SURFACES BETWEEN O WELDS & SURFACES B-N.1+ TO 180 DEG A2. (C0177494) RXI, 29h' B13.10
DATE: 08/01/98 LIMERICK CENERATING STATION UNIT 1 PME 63 REVISIOD: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND I!rTERVAL, FIRST PERIOD, FIRST OtTTAGE (98RF) CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP OUMMARY EXAMINATION ARIA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (REF. DWG. NO. XI-BN 7) 303071 TOP GUIDE ASSEMBLY VT-1 VT-LIM 202R2 R0 X- . . EXAMINED PER AUG-21, SIL 554, " TOP GUICE WELDS & SURFACES N/A CRACKING *. EXAMINATIONS PERFORMED AT RXI, 298' N/A CORE LOCATIONS 30-31 AND 34-35. RXI, 298' (C0177494) 305080 TOP GUIDE RADIAL RESTRAINT VT-3 VT-LIM-202R2 R0 X--- (C01774 941 33 WEDGES, BOLTS, & KEEPERS B-N-1 RXI, 298' B13.10 305090 CORE PLATE VT-3 VT-LIM-202R2 RD X.-- (C0177494) WELDS & SURFACES B-N-1 RXI, 284' B13.10 l i 305100 CORE SUPPORT BOLTING VT-3 VT-LIM-202R2 R0 X.. - EXAMINED 17 STUDS, 34 NUTS & WASHERS ! 34 STUDS, 68 NUTS & WASHERS B N-1 LOCATED BETWEEN 0 TO 180 DEG AZIMUTH, RXI, 284' B13.10 (C0177494) i l l )03110 ORIFICED FUEL SUPPORT (185) VT-3 VT-LIM-202R2 R0 .X-. EXAMINED 7 CASTINGS FROM CORE LOCATIONSr 105 CASTINGS BY CORE POSITION B-N-1 22-31, 46-31, 38-23, 30-43, 22-23, 46 47 RXI, 284' B13.10 AND 14-31. ACCEPTABLE WEAR NOTED ON RXI, 284' GUIDE TUBE SEATING SURFACE OF CASTING 46-47 (C0177494) RPV (REF. DWG. NO. XI-BN-51 l h5100 INCORE CUIDE TUBES (55) VT-3 VT-LIw 202R2 R0 X-.. EXAMINED PER AUG-10, "NON-Q REACTOR i 55 GUIDE TUBES N/A+ 1 l PRESSURE VESSEL INTERNAL COMPONENTS
. RXI, 270'-198i N/A (FSAR TABLE 3.2-1)* AT 5 CORE LOCATIONS:
RXI, 270*-298' 48-53, 32-29, 24-29, 24-33 AND 32-33. l i L (C0177494) I l 35155 INCORE HOUSINGS (55) VT-3 VT LIM-202R2 R0 X-.- EXAMINED AT 5 CORE I4 CATIONS: 48-53, 53 HOUSI*tGS & STABILI2ER B-N-1 32-29, 24-29, 24-33 AND 32 33. ASSEMBLIES B13.10 (C0177494) RXI, 266'-270' s _-_-___.-_..m_____m_ _ _ _ _
l DATES 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 64 REVISION: '1 INSERVICE INSPECTION SIM4ARY REPORT SECOND farrERVAL, FIRST PERIOD, FIRST OUIACE (98RF) CLASS 1 CADEP STATUS COMPONDrTS NR R ASME OEGE SEC. XI RCEP SIM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION- ITEM NO METHOD. PROCEDURE CRMR REMARKS RPV (REP. DWG. NO XI-BN 6) . 605160- INCCRE HOUSING TO RPV WELD VT 3 VT-LIM-202R2 R0 X -- EXAMINED AT 5 CORE LOCATIONS: 48-53, 55 PARTIAL PENETRATION WELDS B-N-2 32-29, 24 29, 24-33, AND 32-33,
'RXI, 366 B13.30 (C0177494)
RPV (REF. DWG. NO. XI-BN-6)
.T605169 CRD HOUSING FLANGE BOLTING VT-1 MAG-CG-407 R5 X-.. CRD IOCATIONS 10 27,14 39,14 51, 185 CRD HOUSING FLANGES 8/FLNG B-G-2 18-15, 22-07, 22 23, 22-31, 26-07, DRYWELL B7.80 30-03, 30-31, 30 39, 30-43, 30-59, DRYWELL 34-19, 34 35, 38 31, 42-31, 46 19, 46 47, 46 55, 50 23, 50 27, 50 39.
(R0691168/ 605170 CONTROL ROD DRIVE ASSY'S (185) VT 3 VT-LIM-202R2 R0 X-.- EXAMINED 12 HOUSINGS AT CORE IDCATIONS
-185 DRIVES B-N-1 54-49, 48-55, 50-51, 42-59, 30 31, RXI, 266' 284' B13.10 30-34, 34-35, 26-31, 34-31, 26-27, 30-27 RXI,'266'-2848 AND 34-27. (C0177494) 605180 CRD CORE SUPPORT STRUCTURE VT-3 VT LIM-202R2 R0 X--- EXAMINED 12. GUIDE IUBES AT CORE 185 CRD GUIDE TUBES & HOUSINGS B-N 2 LOCATIONS: 54-49, 48 55, 50-51, 42-59, i RXI, 266'-284' B13.40 30-31, 30 34, 34 35, 26-31, 34-31,
..RXI, 266'.284' 26-27, 30 27 AND 34-37. (C0177494) 605190 ~ STUB TUBE TO CRD HOUSING WELD VT-3 VT-LIM-202R2 R0 X.-- EXAMINED 12 WELDS AT CORE LOCATIONS:
(105) PARTIAL PENETRATION B-N-2 54 49, 48-55, 50-51, 42-59, 30-31, WELDS B13.40 30-34, 34-35, 26-31, 34-31,-26-27, 30-27 RXI, 266' AND 34-27. (C0177494) 605200 CRD STUB TUBE TO RPV WELD VT-3 VT-LIM-202R2 R0 X--- EXAMINED 12 WELDS AT CORE LOCATIONS: (105) PARTIAL PENETRATION B-N-2 54-49, 48 55, 50 51, 42-59, 30 31, WELDS B13.40 30 34, 34-35, 26-31, 34-31, 26-27, 30 27 RXI, 266' AND 34-27. (C0177494)
1 ) DATE: 08/01/08 L2MERICK GEICRATING STATION UNIT 1 PAGE: 65 REVISICD: 1 INSERVICE INSPECTION SIDEARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) I J CLASS 1 CAUEP STATUS COMPONENTS ' NR R ASME OEGE l SEC. XI RCEP StM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDE2rIIFICATION j ITEM NO METHOD PROCEDCRE CRMR REMARKS
]
RPV (PEF DWG, NO. XI-BN-10) 1 605330 SHROUD SUPPORT LEG (10 DEG1 VT-3 VT-LIM-202R2 R0 X--- EXAMINED APPROXIMATELY 50% OF LEO FROM ! SHROUD SUPPORT ASSY. WELDS B-N-2 RXI, 10 A2 ACCESS THROUGH REMOVED JET PUMP # 2. . B13.40 ) (C0177494) , 605340 SHROUD SUPPORT LEG (30 DEG) VT-3 VT-LIM-202R2 R0 X--- EXAMINED APPROXIMATELY 50% OF LEG FROM SHROUD SUPPORT ASSY. WELDS B-N-2 ACC1.:,;S THROUGH REMOVED JET PUMP # 2. RXI, 30 A2 B13.40 (C01774 94 ) I l 605350 SHROUD SUPPORT LEG (60 DEGI VT-3 VT-LIM-202R2 RO X--- EXAMINED APPROXIMATELY 50% OF LEG FROM SHROUD SUPPORT ASSY. WELDS B-N-2 ACCESS THROUGH REMOVED JET PUMP # 2. RXI, 60 AZ B13.40 (CC1774 94) RPV IPEF. DWG. NO. XI-FA-2 PG. 1-3) 605430 RPV STABILIZER (180 DEG) VT-3 MAG-CG-407 R5 X--- (C0177488) STABILIZER ASSEMBLY & BRACKETS F-A 16C, 313', 400/180 F1.40
- 605440 RPV STABILIZER (225 DEG) VF-3 MAG-CG-407 R5 X--- (C0177489)
STABILIZER ASSEMBLY & BRACKETS F-A 19C, 313', 400/225 F1.40 600450 RPV STABILIZER (270 DEG) VT-3 MAG-CG-407 RS X--- (C01774 91) STABILIZER ASSEMBLY & BRACKETS F-A 15C, 313', 400/270 F1.40 605460 RPV STABILIZER (315 DEC) VT-3 MAG-CG-407 R5 X--- (C01774 921 STABILIZER ASSEMBLY & BRACKETS P A 11C, 313 ', 4 00/315 F1.40 RPV (REF. DWG. NO. Xf-FA-1 PG 1.31 ( l605445 RPY SUPPORT 1-120 DEG. VT-3 MAG-CG-4 07 R5 X--- EXAMINED SUPPOkT BOLTING AND Cl WELD MUPPORT SFIRT COMPONENTS F-A FROM 0 TO 120 DEG A2. (C0177533) F1.40
DATE: 08/01/98 LIMERICX GENERATING S*ATION UNIT 1 PAGE: 66 REUIGION: 1 INSERVICE INSPECTION SD94ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CIASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SW94ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV IREP DWG. NO. XI-EN-9) 606010 P1A UT-60S UT-LIM-511V3 RD X--- EXAMINED PER AUG-03, IEB 80-13, THERMAL SLEEVE TO T-BOX WELD N/A
- CRACKING IN CORE SPRAY SPARGERS* USING NSB (300 AZ) CORE SPRAY *A" N/A BWRVIP 18, *L'.RE SPRAY INTERNALS RPV INTR, EL306.7' 300AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE UT E4AM PERFORMED IN LIEU OF CSVT-1. LIMITATIONS: 40 140
& 220 320 DEG AZ. (C0177490 606015 PIB UT-60S tJT-LIM-511V3 R0 X- -- EXAMINED PER AUG-03, IEB 80-13 THERMAL SLEEVE TO T-BOX WELD N/A
- CRACKING IN CORE SPRAY SPARGERS* USING NSA (60 AZ) CORE SPRAY *B* N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL306.78 60AZ INSPECTION AND FLAW EVAL'.1ATION GUIDELINES", BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. LIMITATIONS: 40 - 140
& 220 320 DEG AZ. (C01774 94 )
606030 P2A UT-605 UT-LIM-511V3 R0 X- -- EXAMINED PER AUG-03, IEB 80 13, HEADER T-BOX COVER PLATE WELD N/A UT-705 UT-LIM-511V3 R0 X... "CRACXING IN CORE SPRAY SPARGERS* USING CORE SPRAY *A* I40P N/A B'#RVI P- 18,
- CORE SPRAY INTERhALS RPV INTR, EL316.7' 300A2 INSPECTION AND FLAW EVALUATION GUIDELINES *. BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C01774 94 )
606025 P2B UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13, READER T-BOX COVER PLATE WELD N/A UT-70S UT-LIM-511V3 RO X- -- " CRACKING IN CORE SPRAY SPARGERS* USING CORE SPRAY *B* LOOP N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR., EL306.1* 60AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 606030 P3aA UT-6DS UT-LIM-511V3 R0 X-. . EXAMINED PER AUG-03, IEB 80 13, HEADER T-BOX TO PIPE WELD N/A UT-70S UT-LIM-511V3 R0 X--. "CRACXING IN CORE SPRAY SPARGERS* USING (RIGHT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 300AZ INSPECTION AND FLAW EVALUATION l
GUIDELINES *. BASELINE UT EXAM PERFORMED l IN LIEU OF CSVT.1. LIMITATIONS: 125 - 149 & 260 - 290 DEG A2. (C0177494)
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 9 AGE: 67 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRHR REMARKS PPV mEF. DWG NO. XI-BN-8) 606035 P3bA UT-60S UT-LIM-511V3 RO X--- EXAMINED PER AUG-03, IEB 80-13, HEADER T-BOX TO PIPE WELD N/A UT070S UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* USING (LEFT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 300AZ INSPECTION AND FIAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) l 606040 P3tB UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13 l HEADER T-BOX TO PIPE WELD N/A UT-70S UT-LIM-511V3 R0 X--- l
" CRACKING IN CORE SPRAY SPARGERS* USING (RIGHT SIDE) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL306.7* 60AZ INSPECTION AND FLAW EVALUATION GUIDELINES
- BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 606045 P3bB UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13, HEADER T-BOX TO PIPE WELD N/A UT-705 UT-LIM 511V3 R0 X---
- CRACKING IN CORE SPRAY SPARGERS* USING (LEFT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 60AZ INSPECTION AND FIAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C01774941
- 606050 P4.A UT-60S UT-LIM-511V3 R0 X- -- EXAMINED PER AUG-03, IEB 80-13, HEADER PIPE TO ELBOW WELD N/A UT-703 UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* USING RPV INTR, EL306.7' 352.5AZ N/A BWRVIP-18, " COKE SPRAY INTERNALS RPV INTR, EL306.7' 352.5AZ INSPECTION AND FIAW EVALUATION GUIDELINES *. BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) l606055 P4 B UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IES 80-13 HEADER FIPE TO ELBOW WELD N/A UT-70S UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* USING RPV INTR, EL306.7' 7.5A2 N/A BWRVIP-it .
- CORE SPRAY INTERNALS RPV IN1R, EL306.7' 7.5A2 INSPECTION AND FIAW EVALUATION GUIDELINES
- BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) l l
i i _ _ _ _ _ _ _ _ _ _ - - - - . _ _ _ _ _ - _ - - - - - - - - - - - - - - - - - - - - - ~
DATES 08/05/98 . LIMERICK GENERAT8NG STATION UNIT 1 PAGE: 68 REVISION: 1 INSERVICE INSPECTION SUM 4ARY R3 PORT i SECOND INTERVAL, FIRST PERIOD, FIisST OUTAGE (98RF) j CLASS U CAUEP STATUS COMPONENTS l NR R ASME OEGE SEC. XI RCE' l SID94ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION I N NO METHOD PROCEDURE CRMR REMARKS
....... ....................... 1..... ....... .......... ................ ... . ........................................
PPV fnEF. DWG. No. XT-BN-81 006060 P4aC UT-605 UT-LIM-511V3 R0 X-.. EXAMINED PER AUG-03, IEB 80 13, HEADER PIPE TO ELBOW WELD N/A UT-70S ITT-LIM 511V3 R0 X ..
- CRACKING IN CORE SPRAY SPARGERS' USING RPV IlfrR, EL306.7' 187.5AZ N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL306.7' 187.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. LIMITATION: 270 - 360 DEG AZ. (C0177494) 606065 P4a0 UT.60S I?T LIM-511V3 R0 X... EXAMINED PER AUG-03, IEB 80-13.
EEADER PIPE TO ELBOW WELD N/A UT-70S UT-LIM-511V3 R0 X..- " CRACKING IN CORE SPRAY SPARGERS" USING RPV INTR, EL306,7' 172.5AZ N/A BWRVIP-10, " CORE SPRAY INTERNALS RPV INTR, EL306.7' 172.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIFU OF CSVT-1. LIMITATION: 270 - 360 DEC A2. (C0177494' 606070 P4bA ITI-6 0S UT. LIM-511V3 R0 X--. EXAMINED PER AUG-03, IES 80-13 ELBOW TO *A" DOWNCOMER PIPE N/A 177- 7 0 S tTr. LIM-511V3 R0 X- - -
- CRACKING IN CORE SPRAY SPARGERS' USING WELD (HEADER ELEV) N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL306.7' 352.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES' BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 606075 P4bB UT-60s tTr-LIM-511V3 R0 X.. . EXAMINED PER AUG-03, IEB 80-13, ELBOW TO *B' DOWNCOMER PIPE N/A UT 70S UT-LIM-511V3 R0 X- - . " CRACKING IN CORE SPRAY SPARGER$* USING WELD (HEADER ELEV) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 7.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES
- BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (CC177494) 606080 P4bC ITI-60S UT. LIM-511V3 R0 X... EXAMINED PER AUG-03, IEB 80-13, ELBOW TO 'C" DOWNCOMER PIPE N/A (77 70S UT-LIM-511V3 R0 X.-- 'CAACKING IN CORE SPRAY SPARGERS" USING WELD (HEADER ELEV) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL306.7' 187.5A2 INSPECTION AND FLAW EVALUATION GUIDELINES *. BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494)
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGEs 69 REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATG1 EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV fREF. DWG, NO. XI-PN-8) 006085 P4bD UT-60S Ur-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13 ELBOW TO *D" DOWNCOMER PIPE N/A UT-70S UT. LIM-511V3 R0 X- -- " CRACKING IN CORE SPRAY SPARGERS' USING WELD (HEADER ELEV) N/A BWRVIP-18 " CORE SPRAY INTERNALS RPV INTR, EL306.7' 172.5AZ INSPECTION AND FLAN EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 001070 PecA UT-60S UT-LIM-511V3 R0 X-.- EXAMINED PER AUG-03, IEB 80-13,
'A" DOWNCOMER PIPE TO ELBOW N/A UT-70S UT-LIM-511V3 R0 X--.
- CRACKING IN CORE SPRAY SPARGERS" USING CELD (SHROUD ELEV) N/A BWRVIP-18, ' CORE SPRAY INrERNALS RPY INTR, EJ 9 8 ' 352.5AZ INSPECTION AND FIAN EVLAUATION CUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) l 306093 P4c8 Ur-60S ITT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13
'B' DOWNCOMER PIPE TO ELBOW N/A UT-703 UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* USING VELD (SHROUJ ELEV) N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 7.5AZ INSPECTION AND FLAN EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 306100 P4cc UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13,
'C' DOWNCOMER PIPE TO ELBOW N/A UT-10S UT-LIM-511V3 R0 X--- ' CRACKING IN CORE SPRAY SPARGERS' USING WELD (SHROUD ELEV) N/A BWRVIP 18, ' CORE SPRAY INTERhALS RPV INTR, EL298' 187.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. BASELINE ITT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494)
)06105 P4cD UT-60S Ur-LIM-511V3 R0 X- -- EXAMINED PER AUG-03. IEB 80-13,
*D* DOWNCOMER PIPE TO ELBOW N/A UT-70S Ur-LIM-511V3 R0 X--- ' CRACKING IN CORE SPRAY SPARGERS* USING WEIb (SHROUD ELEV) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 172.5AZ INSPECTION AND FLAW EVALUATION GUID'".INES " BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177498)
I k l
)
b_.________________________ .j
l 1 1 DATE: 08/01/98 LIMERICK GENERATING STATIC 3 UNIT 1 PAGE: 70 REVISION: 1 INSERVICE INSPECTION SU)9%RY REPORT SECOND INTERVE, FIRST PERIOD, FIRST CUTAGE (98RF) CLASS U CAUEP STAIUS COMPONENTS [ 1 NR R 1 ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATCY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV 'REF, DWG. NO. XI BN 8) 606110 P4dA CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG 03, IEB 80-13,
'A' DOWNCCHER ELBOW TO SHROUD N/A tTT-6 0S UT LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* II3ING PIPE WELD N/A UT-70S UT-LIM-511V3 R0 X--- BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 352.5AZ INSPECTION AND FIAW EVALUATION GUIDELINES". ALSO PERFORMED BASELINE UT EXAM. (C0177494) 606115 P4dB CSVT-1 VT-LIM 202R2 R0 X--- EXAMINED PER AUG-01, IEB 80-13,
'B' DOWNCOMER ELBOW TO SHROUD N/A UT-60S UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS" USING PIPE WELD N/A ITT-70S UT-LIM-511V3 R0 X-.. SWRVIP-18, " CORE SPRAY INTERNES RPV INTR, EL298' 7.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES
- ALSO PERFORMED BASELINE ITT EXAM. (C0177494) 606130 P4dC CSVT-1 VT-LIM-202R2 R0 X--- EXAMINED PER AUG-03, IEB 80-13,
*C" DOWNCOMER ELBOW TO SHROUD N/A ITT-6 0S UT LIM-511V3 R0 X---
- CRACKING IN CORE SPPAY SPARGERS" USING PIPE WELD N/A UT-70S UT-LIM-511V3 R0 X--. BWRVIP-18, ' CORE SPRAY IlfrERNALS K' INTR, EL2988 187.5A2 INSPECTION AND FIAW EVALUATION GUIDELINES *. ALSO PERFORMED BASELINE UT EXAM. (C0177494) 606135 P4 dD CSVT 1 VT-LIM-202R2 RO X--- EXAMINED PER AUG-03, IEB 80-13,
'D' DOWNCOMER ELBOW TO SHROUD N/P tTT- 605 UT-LIM-511V3 R0 X--- ' CRACKING IN CORE SPRAY SPARGERS" USING PIPE WELD N/A ITT-70S UT-LIM-511V3 R0 X... BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 172.5AZ INSPECTION AND FLAW EVEUATION CUIDELINES". ALSO PERFORMED BASELINE UT EXAM. (C0177494) 606130 PSA UT-60S tTT-LIM-511V3 R0 X--. EXAMINED PER AUG-03, IEB 80-13,
'A' DOWNCOMER PIPE TO SLIDING N/A UT-70S UT-LIM-511V3 R0 X- -
' CRACKING IN CORE SPRAY SPARCERS* USING SLEEVE FIELD WELD N/A BWRVIP-18, ' CORE FPRAY INTERNALS RPV INTR, EL299.7' 352.5AZ INSPECTION AND FLAW EVEUATION GUIDELINES *. BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C01774941
! DATE: 04/01/98 l LIMERICX GENERATING STATION UNIT 1 PAGE: 71 l REVISIO3s 1 INSERVICE INSPECTION
SUMMARY
REPORT j SECOND IFTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC XI RCEP St394ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (REF. DWG NO. XI-BN-81 1 206135 PSB ITT-6 0 S (TT-LIM-511V3 R0 X... EXAMINED PER AUG-03, IEB 80-13,
*B' DOWNCOMER PIPE TO SLIDING N/A LTT-70S ITT LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS' USING SLEEVE FIELD WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL299.7' 7.5AZ INSPECTION AND FLAW EVALUATION i
GUIDELINES *. BASELINE ITT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) l606140 P5C 17T-60S t tFT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13, "C' DOWNCOMER PIPE TO SLIDING N/A UT-70S UT-LIM-511V3 R0 X-- - 1 "CBACKING IN CORE SPRAY SPARGERS* USING l l SLEEVE FIELD WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS l RPV INTR, EL299.7' 187.5A2 INSPECTION AND FIAN EVALUATION ) GUIDELINES" BASELINE ITT EXAM PERFORMED l IN LIEU OF CSVT-1. (C0177494) l l606145 P5D UI-605 UT-LIM-511V3 RD X-.- EXAMINED PER AUG-03, IEB 80-13,
'D' DOWNCOMER PIPE TO SLIDING N/A tTT-70S UT-LIM-511V3 R0 X--- *CRACXING IW CORE SPRAY SPARGERS* USING SLEEVE FIELD WELD N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL299.7' 172.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES
- BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 1 606150 PGA UT-60S UT-LIM-511V3 RC X--- EXAMINED PER AUG 03, IEB 80-13,
'A' SLIDING SLEEVE TO CITTER N/A (TT-702 UT-LIM-511V3 R0 X.-. " CRACKING IN CORE SPRAY SPARCERS' USING SLEEVE FIELD WELD l N/A BWRVIP-18, " CORE SPRAY INTERNALS l RPV INTR, EL299.7' 352.5AZ INSPECTION AND FIAW EVALUATION GUIDELINES *, BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 1 j
606155 P68 UT-60S UT-LIM-511V3 RC X--. EXAMINED PER AUG-03, IEB 80-13,
'B' SLIDING SLEEVE TO OUTER N/A UT-70S ITT-LIM-511V3 R0 X-.- ' CRACKING IN CORE SPRAY SPARGERS* USING SLEEVE FIELD WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL299.7' 7.5AZ INSPECTION AND FIAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) f l
DATE: 08/01/98 L2MERICK GENERATING STATION UNIT 1 PAGE: 93 REUISION: 1 INSERVICE INSPECTION StP@%RY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OtTTAGE (98RF) I CLASS U CAUEP STATUS COMPONENTS I NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION ARIA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF. DWG, NO XI-BN-81 006160 P6C UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13, "C' SLIDING SLF2VE TO OUTER N/A UT-70S UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* USING SLEEYE FIELD WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL299.7' 187.5A2 INSPECTION AND FLAW EVALUATION GUIDELINES'. BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C01774 94 ) 606165 P6D ITT-60$ UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13, "D" SLIDING SLEEVE TO OUTER N/A (TT-70S LTT-LIM-511V3 R0 X-.. ' CRACKING IN CORE SPRAY SPARGERS* USING SLEEVE FIELD WELD N/A DWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL299.7' 172.5AZ INSPECTION AND FIAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 606170 P7A UT-608 UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80 13, "A" OtfrER SLEEVE TO PIPE SHOP N/A UT-705 UT-LIM-511V3 RC X--- ' CRACKING IN CORE SPRAY SPARGERS" USING WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL299.7' 352.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU OF CSVT 1. (C0177494) 606175 P7B UT-60S UT-LIM-511V3 R0 X--- EXAMINED PER AUG-03, IEB 80-13,
'B' OUTER SLEEVE TO PIPE SHOP N/A UT-70S UT-LIM-511V3 R0 X--- ' CRACKING IN CORE SPRAY SPARGERS* USING WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL299.7' 7.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE tTT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494) 606180 P7C UT-60S UT-LIM-511V3 R0 X- - EXAMINED PER AUG-03, IEB 80-13, "C" OUTER SLEEVE TO PIPE SHOP N/A UT-70s tTT-LIM-511v3 R0 X- -
' CRACKING IN CORE SPRAY SPARGERS* USING WELD N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL299.7' 187.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE ITT EXAM PERFORMED IN LIEU OF CSVT-1. (C0177494)
DATE: 08/01/98 LIMERICK GENERATI23 STATION UNIT 1 PAGE: 73 REVISIC3: 1: INSERVICE INSPECTION SID9%RY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUDGE (98RF) CLASS U CADEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP stMmRY EXAMINATION AREA CATGY EXAM EOOO NtheER IDENTIFICATION ITEM NO METHOD. PROCEDURE CRMR REMARKS g .............................. .................. ................ .... ....................-. ................ RPV (REF. DWG. NO. XI-BN-8) 306185 .P7D UT-60S UT-LIM-511V3 R0 X-.. EXAMINED PER AUG.03, IEB 80 13, "D* CUTER SLEEVE TO PIPE SHOP N/A ttT-70S UT LIM-511V3 R0 X*.. ' CRACKING IN CORE SPRAY SPARGERS* USING WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL299.7' 172.5AZ INSPECTION AND FLAN EVALUATION GUIDELINES". BASELINE (TT EXAM PERFORMED ! IN LIEU OF CSVT-1. (C0177494) )D6190 PS2A CSVT-1 VT. LIM-202R2 R0 X..- EXAMINED PER AUG.03, IEB 80 13,
'A' SHROUD PIPE TO COLLAR WELD N/A UT-(OS UT-LIM-511V3 R0 X-.. ' CRACKING IN CORE SPRAY SPARGERS' USING l .RPY INTR, EL298' 352.5AZ N/A ITT.70S UT-LIM-511V3 R0 X-.. BWRVIP-18,
- CORE SPRAY IFTERNALS
' RPV INTR, EL2988 352.5AZ INSPECTION AND FLAW EVALUATION i
GUIDELINES *. ALSO PERFORMED BASELINE ITT EXAM. (C0177494) l06195 POIS CSVT-1 VT. LIM-202R2 R0 X -- EXAMINED PER AUG.03, IEB 80 13, [ 888 SHROUD PIPE TO COLLAR WELD N/A LTT-605 UT. LIM-511V3 R0 X*.- ' CRACKING IN CORE SPRAY SPARGERS" USING RPV INTR, EL298* 7.5AZ N/A 17T.705 UT. LIM-511V3 R0 X... BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL2985 7.5AZ INSPECTION AND FLAN EVALUATION i GUIDELINES *. ALSO PERFORMED BASELINE UT ! EXAM. (C01774 94) l l-I f06200 PSIC CSVT 1 YT. LIM-202R2 R0 X- . EXAMINED PER A03 03, IEG 80 13,
'C' SHROUD PIPE TO COLLAR WELD N/A UT.60$ UT. LIM-511V3 R0 X...
t " CRACKING IN CORE SPRAY SPARGERS' USING RPV INTR, EL298 ' 187.5A2 N/A UT-70s UT-LIM 511V3 R0 X .. BWRVIP.18, " CORE SPRAY INTERNALS RPV INTR, EL298' 187.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. ALSO PERFORM,,ED::
- BASELINE UT
.. EX/.M . (C0177494)
$6203 P8tD CSVT-1 VT LIM 202R2 RO X-.. EXAMINED PER AUG-03, IEB 80 13,
*D* SHROUD PIPE TO COLLAR WELD N/A UT.60S 17T-LIM-511V3 R0 X .. ' CRACKING IN CORE SPRAY SPARGERS' USING RPV INTR, EL2988 172.5A2 N/A UT.70s UT-LIM-511V3 R0 X... BWRVIP.18,
- CORE SPRAY INTERNALS i.
RPV INTR,.EL298' 172,$A2 INSPECTION AND FLAN EVALUATION GUIDELINES". ALSO PERFORMED BASELINE UT EXAM. (C0177494)
DATE: 08/01/98 LIMERICK GENERATZNG STATION IBtIT 1 PAGE: 74
- REU2SION: 1 INSERVICE INSPECTION S*4 NARY REPORT I
SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC..XI RCEP StBMARY EXAMINATION AREA CATGY EXAM E O O O. NtBGER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARXS RPV (REF. DWG. NO, XI-BN-8) 606310' P8bA CSVT-1 VT-LIM-202R2 RO X... 89 EXAMINED PER AUG-03, IEB 80-13,
'A' COLLAR TO SNROUD WELD N/A UT-60S UT-LIM-511V3 R0 X.-- " CRACKING IN CORE SPRAY SPARGER$* USING RPV INIR, EL298' 352.5A2 N/A tTT-70S LTT-LIM-511V3 R0 X..- BWRVIP 18, ' CORE SPRAY INTERNALS RPV IWrR, EL298' 352.5A2 INSPECTION AND FLAW EVALUATION GUIDELINES" ALSO PERFORMED BASELINE UT EXAM. (C0177494) 606315 P8bB CSVT-1 VT-LIM-202R2 R0 X--+ EX.' WINED PER AUG-03, 158 80-13,
'B' COLLAR TO SHROUD WELD N/A (TI-6 0S UT-LIM-511V3 R0 X--- ' CRACKING IN CORE SPRAY SPARGERS' USING RPV INTR, EL298' 7.5AZ N/A ITF-70S LTF-LIM 511V3 R0 X*-- BWRVIP-18, ' CORE SPRAY INTERNALS l RPV INTR, EL298' 7.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES *, ALSO PERFORMED BASELINE UT EXAM. (C0177494)
-606320 P8bC CSVT-1 VT-LIM-202R2 RO X- - EXAMINED PER AUG-03, IES 80-13, "C' COLLAR TO SHROUD WELD N/A UT-60S UT-LIM-511V3 R0 X--- " CRACKING IN CORE SPRAY SPARGERS* USING RPV INTR, EL298' 167.5AZ N/A LTI-70S ITf-LIM-511V3 R0 X... BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL298' 187.5AZ INSPECTION AND FLAW EVALt!ATION GUIDELINES *. ALSO PERFORMED BASELINE UT EXAM. (C0177494) 600335 P8bD CSVT 1 VT LIM-202R2 R0 X. . EXAMINED PER AUG-03, IEB 80-13,
' 'D" COLLAR 70 SHROUD WELD N/A UI-60S UT-LIM-51173 R0
- f. X--. " CRACKING IN CORE SPRAY SPARGERS" USING RPV INTR, EL298' 172.5AZ N/A UT-70S UT-LIM-511V3 R0 X... SWRVIP-18, " CORE SPRAY INTERNALS l
. RPV INTR, EL298' 172.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES" ALSO PERFORMED BASELINE UT EXAM. (C0177494) 606350 PB1 15AZ CSVT-1 YT-LIM-202R2 R0 X... EXAMINED PER AUG 03, IEB 80-13,
'B&D* HEADER PIPE BRACKET AND N/A ' CRACKING IN CORE SPRAY SPARGERS" USING RPV ATTA-M WELD N/A BWRVIP 18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 15AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494)
DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 75 REVISIClh 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONT.NTS NR R ASME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (REF. DWG NO. XT-BN-8) 606255 PB2 85.5A2 CSVT-1 VT LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
*B&D' HEADER PIPE BRACKET AND N/A
" CRACKING IN CORE SPRAY SPARGERS* USING RPV ATTACHMENT WELD N/A BWRVIP.18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 85.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494) 606260 PB3 112.5AZ CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
*B&D" HEADER PIPE BRACKET AND N/A
" CRACKING IN CORE SPRAY SPARGERS* USING RPV ATTACHMENT WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS KPV INTR, EL306.7' 112.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494)
- 606265 PB4 165A2 CSVT-1 VT-LIM-202R2 R0 X*=. EXAMINED PER AUG-03, IEB 80-13,
*B&D" HEADER PIPE BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS* USING RPV ATTACHMENT WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL306.7' 165A2 INSPECTION AND FLAW EVALUATION GUIDELINE
'606270 PBS 195A2 CSVT-1 VT-LIM.202R2 R0 X... EXAMINED PER AD3-03, IEB 80-13,
'A&C' EEADER PIPE BRACKET AND N/A
" CRACKING IN CORE SPRAY SPARGERS* USING c RPY ATTACHMENT WELD N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL306.7' 195AZ INSPECTION AND FLAW EVALUATION '
GUIDELINES *. (C0177494) 606275 PB6 247.5AZ I CSVT-1 YT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80 13, {
*A&C' HEADER PIPE BRACKET AND N/A
" CRACKING IN CORE SPRAY SPARGERS* USING RPV ATTACHMENT WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL306.1' 247.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C01774 94 )
k 606280 PB7 274.5A2 CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
'A&C' HEADER PIPE BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS* USING j RPV ATTACHMENT WELD N/A BWRVIP-18,
- COPE SPRAY INTERNALS -
RPV INTR, EL306.1' 214.5AZ INSPECTION AND FLAW EVALUATION : GUIDELINES" (C0177494) l j 1 i w______________.__.__ __
DATE: 08/01/98 LIMERICX GENERATING STATION UNIT 1 PAGE: 76 REVISION: 1 INSERVICE INSPECTION SUP94ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SU MARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV VREF. DWG NO. XI-8N-81 606345 PB8 345AZ CSVT-1 VT-LIM-202R2 R0 X..- EXAMINED PER AUG-03, IEB 80-13 "A&C* HEADER PIPE BRACKET AND N/A ' CRACKING IN CORE SPRAY SPARGERS" USING RPV ATTACHMENT WELD N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL306.7' 345AZ - INSPECTION AND FLAW EVALUATION GUIDELINES'. (C0177494) 006200 S1A EVT-1 Vf-LIM-202R2 R0 X..- EXAMIEND PER AUG-03, IEB 80-13, .
'A' SPARGER T-BOX COVER PLATE N/A
' CRACKING IN CORE SPRAY SPARGERS' USING
' WELD N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL298' 352.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES * (C0177494) 606395 S1B EVT-1 VT-LIM-202R2 R0 X- - EXAMINED PER AUG-03, IEB 80-13, "B' SPARGER T-BOX COVER PLATE N/A
- CRACKING IN CORE SPRAY SPARGERS" USING WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 7.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494)
'606300 ~ S1C EVT-1 VT LIM-202R2 R0 X.. -
- EXAMINED PER AUG-03, IEB 80-13,
'C' SPARGER T-BOX COVER PLATE N/A
" CRACKING IN CCD.E SPRAY SPARGERS' USING WELD N/A BWRVIP-18,
- CORE SPRAY INTERNALS ,
RPV INTR, EL298' 187.5A2 INSPECTION AND FLAN EVALUATION GUIDELINES". (CC177494) l 606305 S1D EVT-1 VT-LIM-202R2 R0 X-- EXAMINED PER AUG-03, IEB 80-13
'D* SPARGER T-BOX COVER PLATE N/A
- CRACKING IN CORE SPRAY SPARGT.RS* USING WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298* 172.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494) 606310 S2AA EVT-1 VT-LIM-202R2 RO X-.. EXAMINED PER AUG-03, IEB 80-13,
'A' SPARGER T-BOX TO PIPE WELD N/A
- CRACKING IN CORE SPRAY SPARGERS* USING (RIGHT SIDE) l N/A BWRVIP-18, ' CORE SPRAY ItrIERNALS RPV INTR, EL2988 352.5A2 {
INSPECTION AND FLAN EVALUATION GUIDELINES *. (C0177494) I
)
l DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGEs 17 REVISIONS 1 INSERVICE INSPECTION SUPNARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OtTTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS l NR R ASME' OEGE ( SEC. XI RCEP r SUpmARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METh0D PROCEDURE CRMR REMARKS RPV (RfP. DWG. NO. XI-BN-8) !606315 S2bA- EVT-1 VT LIM-202R2 R0 X. -. EXAMINED PER AUG 03, IEB 80-13,
."A* SPARGER T-BOX TO PIPE WELD N/A
' CRACKING IN CORE SPRAY SPARGERS* USING l -(LEPT SIDE) N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298* 352.5A2 INSPECTION AND FLAW EVALUATION
! GUIDELINES *. (C0177494) j !606320 S2tB EVT-1 YT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80 13,
*B* SPARGER T-BOX TO PIPE WELD N/A
" CRACKING IN CORE SPRAY SPARGERS" USING (RIGHT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL2SS' 7.5A2 INSPECTION AND FLAW EVALUATION GUIDELIL*ES*. (C0177494) i606325 S2bB EVT-1 VT. LIM-202R2 RO X-*. EXAMINED PER AUG-03, IEB 80 13,
*B* SPARGER T-BOX TO PIPE WELD N/A
- CRACKING IN CORE SPRAY SPARGERS" USING i
'(LEFT SIDE) N/A BWRVIP.18, " CORE SPRAY INTERNALS RPV INTR, EL290' 7.5AZ INSPECTION AND FLAN EVALUATION CUIDELIENS". (C0177494) l606330 S3tC EVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
'C' $PARGER T-BCX TO PIPE WELD N/A
" CRACKING IN CORE SPRAY SPARGERS" USING (RIGHT SIDE) N/A BWRVIP-18, " CORE SPRAY 13rTERNALS RPV' INTR, EL298' 187.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494)
'006335 S2bc EvT-1 vt-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80 13,
'C' SPARGER T. BOX TO PIPE WELD N/A
" CRACKING IN CORE SPRAY SPARGERS" USING (LEFT SIDE) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 187.5A2 INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494)
K306340 S21D . EVT.1 VT-LIM-202R2 R0 X-.. EXAMINED PER AUG-03, IEB 80-13,
*D' SPARGER T-BOX TO PIPE NELD N/A
" CRACKING IN CORE SPRAY SPARGER$" USING
'(RIGHT SIDE) N/A BWRVIP-18, " CORE SPRAY IlffERhALS
' RPV INTR, EL298' 172.5A2 INSPECTION AND FLAW EVALUATION l GUIDELINES" (C0177494)
I i-
DATE: 08/01/98 LZMERICK GENERATING STATION UNIT 1 PAGE: 78 REtf!SION: 1 INSERVICE INSPECTION SUlHARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONENTS PR R ASME OEGE SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l l RPV fREF. DWG. NO. XI-ON.8) 606345 S2bD EVT-1 VT. LIM-202R2 RO X.-- EXAMINED PER AUG.03, IEB 80 13, "D' SPARGER T. BOX TO PIPE WELD N/A ' CRACKING IN CORZ SPRAY SPARGERS" USING (LEFT SIDE) N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 172.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) 606350 S3aXXA CSVT-1 VT. LIM.202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13.
"A" SPARGER PIPE WELD TO N/A
- CRACKING IN CORE SPRAY SPARGERS* Un%J NOZZLE WELD, TYPICAL OF 65 N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 273 - 88AZ INSPECTION AND FLAW EVALUATION GUIDELINES * (C0177494) 603355- 53aIXB CSVT-1 VT-LIM.202R2 R0 X.-. EXAMINED PER AUG.03, IEB 80 13,
*B' SPARGER PIPE WELD TO N/A " CRACKING IN CORE SPRAY SPARGERS" USING NOZZLE WELD, TYPICAL OF 65 N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL290' 273 88AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C01774 94 )
606360 53aZXC CSVT-1 VT. LIM.202R2 R0 X. .. EXAMINED PER AUG.03 IEB 80 13,
'C' SPARGER PIPE WELD TO N/A "CRACXING IN CORE SPRAY SPARGERS" USING NOZZLE WELD, TYPICAL OP 65 N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV 11rrR, EL2988 93 267AZ INSPECTION AND FLAW EV;.LUATION GUIDELINES". (C0177494) 6063G5 S3aXXD CSVT-1 VT-LIM.202R2 R0 X--- EXAMINED PER AUG.03, IEB 80 13,
'D" SPARGER PIPE WELD TO N/A " CRACKING IN CORE SPRAY SPARGERS' USING NOZZLE WELD, TYPICAL OF 65 N/A BWRVIP.18 " CORE SPRAY INTERNALS RPV INTR, EL298' 93 267AZ INSPECTICN AND FLAW EVALUATION GUIDELINES" (C0177494) 606370 S3bXXA CSVT.1 VT. LIM-2C2R2 R0 X... EXAMINED PER AUG.03, IEB 80 13,
*A* SPARGER NCZZLE TO ORIFICE N/A ' CRACKING IN CORE SPRAY SPARGERS' OSING WELD, TYPICAL OF 65 ORIFICES N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 273 8BAZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494)
DATE: 08/01/98 LIMERICK GENERATING STATION LUIT 1 PAGEt 19 REVISIC:28 1 INSERVICE INSPECTION SUW.ARY REPORT SECOND IlffERVAL, FIRST PERIOD, FIRST Ot7TAGE (98RF) CLASS U CADEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (REF. DW3, NO. XI-BN-8) 606375 S3bXXB CSVT-1 VT-LIM-202R2 R0 X.-. EXAMINED PER AUG-03, IEB 80-13,
'B' SPARGER NOZZLE TO ORIFICE N/A
" CRACKING IN CORE SPRAY SPARGERS" USING WELD, TYPICAL OF 65 ORIFICES N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV IN'11t, EL298' 273 - 88AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494) 606380 S3bXXC CSVT-1 VT LIM-202R2 RO X--- EXAMINED PER AUG-03, IEB 80 13, "C" SPARGER NOZZLE TO ORIFICE N/A
' CRACKING IN CORE SPRAY SPARGERS* USING WELD, TYPICAL OF 65 ORIFICES N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 93 267AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494i
,696385 $3bXXD CSVT-1 VT-LIM 202R2 R0 X- - EXAMINED PER AUG-03, IEB 80 13,
'D' SPARGER NOZZLE TO ORIFICE N/A
' CRACKING IN CORE SPRAY SPARGERS* USING WELD, TYPICAL OF 65 ORIFICES N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 93 - 267AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494)
- 606390 53c62B CSVT-1 VT-LIM-202R2 R0 X- -. EXAMINED PER AUG-03, IEB 80-13,
'B' SPARGER TO DRAIN PIPE WELD N/A
- CRACKING IN CORE SPRAY SPARGERS" USING (RIGHT SIDE) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 83AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494) 606395 S3c4B CSVT-1 VT-LIM-202R2 R0 X- -. EXAMINED PER AUG-03, IEB 80-13,
'B' SPARGER TO DRAIN PIPE WELD N/A
' CRACKING IN CORE SPRAY SPARGERS' USING (LEFT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL298' 275AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494)
- 606400 S3c62D CSVT-1 VT-LIM-202R2 R0 X--- EXAMINED PER AUG-03, IEB 80-13,
'Ds SPARGER TO DRAIN PIPE WELD N/A ' CRACKING IN CORE SPRAY SPARGERS* USING l
(RIGHT SIDE) N/A BWRVIP-18, ' CORE SPRAY INTERN.C RPV INTR, EL290 ' 263AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494)
DATE: 08/01/98 LIMERICK CENERATING STATIG3 UNIT 1 PAGE: 80 REVISION: 1 INSERVICE INSPECTION StM4ARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RP) CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SIM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICJ. TION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (REF. DWG. NO XI-BN-8) 606405 S3c4D CSVT-1 YT-LIM-202R2 R0 X . '- . EXAMINED PER AUG-03, IEB 80-13, "D" SPARGER TO DRAIN PIPE WELD N/A
" CRACKING IN CORE SPRAY SPARGERS" USING (LEFT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, 11298' 95A2 INSPECTION AND FLAW EVALUATION GUIDELINES * (C0177494) 603410 S3dXXA CSVT-1 YT LIM-202R2 R0 X- - EXAMINED PER AUG.03, IEB 80-13, "A" SPARGER NOZZLE STITCH N/A
- CRACKING IN CORE SPRAY SPARGERS* USING WELDS, 2 WELDS 180 DEG. APART, N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 273 88AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) 606419 S3dXXB CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
'B' SPAAGER NOZZLE STITCH N/A
- CRACKING IN CORE SPRAY SPARGERS* USING WELDS, 2 WELDS 180 DEG. APART, N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 273 88AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494) 606430 S3dXXC CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
'C' SPARGER NO2ZLE STITCH N/A " CRACKING IN CORE SPRAY SPARGER$* USING WELDS, 2 WELDS 180 DEG. APART, N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 93 267AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494) 600425 S3dXXD CSVT-1 VT-LIM-2C2R2 R0 X-. .
EXAMINED PER AUG.03, IEB 80 13,
'D' SPARGER NOZZLE STITCH N/A " CRACKING IN CORE SPRAY SPARGERS' USING WELDS, 2 WELDS 180 DEG. APART, N/A BWRVIP.18, " CORE SPRAY INTERNALS RPV INTR, EL298' 93 - 267A2 INSPECTION AND FLAN EVALUATION GUIDELINES". (C0177494) 606430 83d62B CSVT-1 VT-LIM-202R2 R0 X-.. EXAMINED PER AUG-03, IEB 80-13,
*B" SPARGER DRAIN STITCH WELDS N/A
" CRACKING IN CORE SPRAY SPARGERSa USING (RIGHT SIDE), ; WELDS 180 DEG, N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 83AZ INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494) l
l , DATEt 04/01/98 l LIMERICK GENERATING STATION UNIT 1 PAGE: 81 REVISION: 1 ) INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERVAL, FIRST PERIOD, FIRST Ot? RAGE (98RF) { CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE EEC. XI RCEP SIM4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRHR REMARKS
....... .............................. ....... .......... ................ .... ........................................ I l
RPV IREF. DWG. NO. XI-BN-8) 606435 E3d4B CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80-13,
'B' SPARGER DRAIN STITCH WELDS N/A
' CRACKING IN CORE SPRAY SPARGERS* USING >
(LEFT SIDE), 2 WELDS 180 DEG. N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298* 275AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) l 606440 S3d62D CSVT-1 VT-LIM-202R2 R0 X- .- EXAMINED PER AUG-03, IEB 80-13, "D" SPARGER DRAIN STITCH WELDS N/A
" CRACKING IN CORE SPRAY SPARCERS' USING (RIGHT SIDE), 2 WELDS 180 DEG. N/A BWRVIP-18, ' CORE SPRAY INTERhALS RPV INTR, EL298' 263AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) l i
606445 53d4D CSVT-1 Vr-LIM-202R2 R0 X--- EXAMINED PER AUG-03, IEB 80-13,
'D' SPARCER DRAIN STITCH WELDS N/A .
" CRACKING IN CORE SPRAY SPARGERS* USING (LEI"f SIDE), 2 WELDS 180 DEG. N/A BWRVIP-18,
- CORE SPRAY INTERNALS J RPV IN'Ilt, EL298* 95A2 4 INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494) 606450 SeaA EVT-1 YT-LIM-202R2 R0 X... EXAMINED PER AUG-03, IEB 80 13
'A' SPARGER PIPE TO END CAP N/A " CRACKING IN CORE SPRAY SPARGER$" USING CELD (RIGHT SIDE) N/A BWRVIP-18, " CORE SPRAY INTERNALS iPV INTR, EL298' 08A2 INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) 601455 S418 EvT 1 VT-LIM-202R2 R0 X..- EXAMINED PER AUG-03, IEB 80-13,
*B' SPARGER PIPE TO END CAP N/A " CRACKING IN CORE SPRAY SPARGERS* USING WELD (RIGHT SIDE) N/A BWRVIP.18, " CORE SPRAY INTERNALS RPV INTR, EL298' 88AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494)
!606460 S4rc EVT-1 YT LIM-202R2 R0 X-.- EXAMINED PER AUG-03, IEE 80-13.
'C' SPARGER PIPE TO END CAP N/A " CRACKING IN CORE SPRAY SPARGERS* USING WELD (RIGHT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL298' 267AZ INSPECTION AND FLAW EVALUATION GUIDELINES'. (C0177494) i
'DATE: 08/01/98 LIMERICK GENERAT2NG STATION UNIT 1 PAGE: 82 REVISION: 1 INSERVICE INSPECTION SUP9tARY REPORT -
SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) ' CLASS U CAUEP STATUS COMPONENTS NR R ASME OEGE
+
SEC. XI RCEP SUP94ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS
...... ....................+......... ....... .......... ................ .... ........................................
RPV 'REF. DWG. NO. XI-BN-8) 606465 S4aD EVT-1 VT-LIM-202R2 R0 X-.- EXAMINED PER AUG-03, IEB 80-13,
*D" SPARGER PIPE TO END CAP N/A
- CRACKING IN CORE SPRAY SPARGER$* USING WELD (RIGHT $1DE) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, EL298' 267AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494) 606470 'S4bA EVT-1 YT-LIM-202R2 RO X--- EXAMINED PER AUG-ON IED 80-13,
'A' SPARCER PIPE TO END CAP N/A
- CRACKING IN CORE SPRAY SPARGERS* USING WELD (LEFT SIDE) N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 273AZ INSPECTION AND FLAW EVALUATION GUIDELINES *, (C0177494) 606475 S4bB EYT-1 VT-LIM-202R2 R0 X--- EXAMINED PER AUG-03, IEB 80-13,
*B* SPARGER PIPE TO END CAP N/A
- CRACKING IN CORE SPRAY SPARGERS* USING WELD (LEFT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INTR, EL298' 273AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) 606400 S4bC EVT-1 VT-LIM-202R2 RO X--. EXAMINED PER AUG-03, IEB 80 13,
*C* SPARGER PIPE TO END CAP N/A
- CRACKING IN CORE SPRAY SPARGERS* USING WELD (LEFT SIDE) N/A BWRVIP-18,
- CORE SPRAY INTERNALS RPV INIR, EL298 ' 93AZ INSPECTION AND FLAN EVALUATION CUIDELINES*, (C0177494) 606485 S4bD Evr-1 YT-LIM-202R2 R0 X--- EXAMINED PER AUG-03, IEB 80 13,
*D' SPARGER PIPE TO END CAP N/A
- CRACKING IN CORE SPRAY SPARGERS* USING WELD (LEFT SIDE) N/A BWRVIP.18,
- CORE SPRAY INTERNALS RPV INTR, EL298 ' 93AZ - INSPECTION AND FLAW EVALUATION GUIDELINES". (C0177494) 606450 SB1 CSVT-1 E ?,IM-202R2 RO X-.. EXAMINED PER AUG-03, IEB 80 13,
*A & B* SPARGER BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS* USING SHROUD ATTACHMENT WELDS N/A BWRVIP-18, ' CORE SFRAY INTERNALS RPV INTR, EL298' 7.5AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0177494)
l DATE: 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 83 l REVISION: 1 INSERVICE INSPECTION
SUMMARY
REPORT SECOND INTERV E , FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STAIUS COMPONENTS NR R ASME OEGE SEC. XI RCEP
SUMMARY
EXAMINATION AREA CATGY EXAM EOOO l NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l l RPV iPEF. DWG. NO. XI . PN- 91 606495 SB2 CSVT.1 VT. LIM-202R2 R0 X.. . EXAMINED PER AUG-03, IEB 80-13, "A & B' SPARGER BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS* USING SHROUD ATTACHMENT WELDS N/A BWRVIP.18,
- CORE SPRAY INTERNALS RPV IlffR, EL298 ' 44 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0177494) l606500 SB3 CSVT.1 VT. LIM-202R2 R0 X-.. EXAMINED PER AUG 03, IEB 60 13,
'A & B* SPARGER BRACKET AND N/A l
- CRACKING IN CORE SPRAY SPARGERS* USING SHROUD ATTACHMENT WELDS N/A BWRVIP.18,
- CORE SPRAY INTERNALS I- RPV INTR, EL298 ' 84 A2 r INSPECTION AND FLAW EVALUATION GUIDELINES' (C0177494) l606505 SI4 CSVT.1 VT. LIM 202R2 R0 X-.- EXAMINED PER AUG-03, IEB 80 13,
*C & D* SPARGER BRACKET AND N/A ' CRACKING IN CORE SPRAY SPARGERS* USING SHROUD ATTACHMENT WELDS N/A BWRVIP.18,
- CORE SPRAY INTERNALS RPV INTR, EL298' 96AZ INSPECTION AND FIAW EVALUATION GUIDELINES". (C0177494) 606510 SBS CSVT-1 VT-LIM-202R2 R0 X... EXAMINED PER AUG.03, IEB 80 13,
'C & D* SPARGER BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS* USING SHROUD AITACHMENT WELDS N/A BWRVIP.18, " CORE SPRAY INTERNALS RPV IsrTR, EL298' 136AZ INSPECTION AND FLAW EVEUATION CUIDELINES' (C0177494)
'60I515 SB6 CSVT.1 VT-LIM 202R2 R0 X... EXAMIEND PER AtKi-03 IEB 80 13,
*C & Da SPARGER BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS' USING SHROUD ATTACHMENT WELDS N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, EL298' 172.5AZ INSPECTION AND FLAW EVEUATION GUIDELINES" (C0177494) 1 l606520 SB7 CSVT-1 VT. LIM 202R2 R0 X-.. EXAMINED PER AUG 03, IEB 80 13, l
N/A i l
'C & D' SPARGER BRACKET AND " CRACKING IN CORE SPRAY SPARGERS" USING 1
)
I SHROUD ATTACHMENT WELDS N/A BWRVIP.18, " CORE SPPAY INTERNALS I I RPV INTR, EL298' 187.5A2 INSPECTION AND FLAW EVEUATION 4 GUIDELINES * (C0177494) l l i i l l l 1 j
DATES. 08/01/98 LIMERICK GENERATING STATION UNIT 1 PAGE: 84- ' REVISION: 1 INSERVICE INSPECTION StBNARY REPORT SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (98RF) CLASS U CAUEP STATUS COMPONE)frS-NR R ASME OEGE SEC, XI RCEP
- StBe(ARY EXAMINATION AREA CATGY EXAMi EOOO NUMBER IDENTIFICATION ITEM NO METHOD- PROCEDURE CRMR REMARKS RPV (REF. DWG. NO. XI.BN-8) !
1
;606335 'SB8 CSVT*1' VT. LIM.202R2 R0 X-.- EXAMINED PER AUG.03, IEB 80 13,
*C & D" SPARGER BRACKET AND N/A ' CRACKING IN CORE SPRAY SPARGERS* USING SHROUD ATTACHMENT WELDS N/A BWRVIP.18, ' CORE SPRAY IlfrERNALS
- RPV IlrrR, EL298' 224AZ' INSPECTION AND FLAW EVALUATION GUIDELINES'. (C0177494) 606530 SB9 CSVT.1 VI. LIM.202R2 R0 X... EXAMIEND PER AUG.03, IEB 80 13,.
- 'C & D' SPARGER BRACKET AND N/A
- CRACKING IN CORE SPRAY SPARGERS* USING
'SMROUD ATTACHMENT WELDS N/A BWRVIP.18, " CORE SPRAY INTERNALS RPV INTR, EL298' 264AZ INSPECTION AND FLAW EVALUATION j GUIDELINES *. (C0177494) )
i 1 006535 SB10 CSVT.1 VT. LIM.202R2 R0 X... EXAMINED PER AUG.03 .IES 80 13,
'A & Ba SPARGER BRACKET AND N/A " CRACKING IN CORE SPRAY SPARGERS" USING SHROUD ATTACHMENT WELDS N/A' BWRVIP.18,
- CORE SPRAY INTERNALS RPV IlfrR, EL298' 276AZ. INSPECTION AND FLAW EVALUATION GUIDELINE $'. (C0177494) 606540' SB11: -
.CSVT-1 VI. LIM.202R2 RO X..* EXAMINED PER AUG.03, IEB 80 13, "A & B" SPARGER BRACKET AND N/A " CRACKING IN CORE SPRAY SPARGER$" USING SHROUD ATTACHMENT WELDS N/A BWRVIP.18, ' CORE SPRAY IlrTERNALS RPV 11rrR, EL298
- 316AZ INSPECTION AND FLAN EVALUATION GUIDELINES" (C0177494) 1 003545 SB12' CSVT.1 VT.LIN.202R2 R0 X... EXAMINED PER AUG.03, IEB 80 13,
*A & B' SPARGER BRACKET AND N/A " CRACKING IN CORE SPRAY SPARGERS" USING
. SHROUD ATTACHMENT WELDS N/A BWRVIP.18,
- CORE SPRAY INTERNALS
. RPV IlrrR. EL298' 352AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C01774 94 )
(REF. DWG. NO. ST-4 INDEXI 800000 REACTOR COOLANT VT.2 ST.4 041 950 1 .X.* EXAM REVEALED LEAKAGE AT PSV.041 1F013L PRESSURE BOUNDARY CLASS 1 B.P AT FLANGE CONN XrION, WAS REPLACED PER
- l. B15.10 WO8 C0182090 AND EXAMINED SAT. ALSO AT LPRM-16-41 THROUGH WEEP HOLE AND WAS EVALUATED ACCEPTABLE PER ARS A1134302, EVAL.01.
l l
SECTION 2 I i
SUMMARY
OF REPORTABLE CONDITIONS OBSERVED DURING IN-SERVICE INSPECTION I LIMERICK GENERATING STATION UNIT 1 MARCH 1,1996 TO MAY 21,1998 l
section 2
SUMMARY
OF REPORTABLE CONDITIONS OBSERVED As a result of examinations performed prior to and during the Unit 1,7* Refuel Outage, numerous conditions were reported. Subsequent examinations and/or evaluations determined most conditions to be either insignificant or geometric in nature. However, one (1) reportable condition was recorded and is summarized below: STEAM DRYER LIFTING LUG RESTRAINT During the augmented examination of the steam dryer assembly, a broken radial restraint strap was observed at the 325 degree lifting lug. An engineering evaluation was performed and the decision was made to remove the strap. Reference NCR # 98-00884. i l i
LIMERICK GENERATING STATION , I UNIT 1
SUMMARY
REPORT FOR THE MARCH 1,1996 TO MAY 21,1998 ' PERIODIC IN-SERVICE INSPECTION REPORT No. 7 BOOK 2 OF 2 I l l l I
1 SECTION 3 i SUMMAR'Y OF ASME REPAIRS AND REPLACEMENTS COMPLETED LIMERICK GENERATING STATION UNIT 1 MARCH 1,1996 TO MAY 21,1998
Section 3 Page 1 of 6
SUMMARY
OF ASME XI REPAIRS AND REPLACEMENTS NIS-2 No. Description of Work System 011: Emeroency Service Water C0170342 HBC-143 & HBC-152, Installed %" welded hose connections. C0170450 HBC-138 & HBC-147, Installed %" welded hose connections. C0176847 HBC-148-1, Replaced 4" E.S.W. piping. C0176849 HBC-152-1, Replaced 8" E.S.W. piping. System 041: Nuclear Boiler- Main Steam Relief Valves R0689418 & PSV-041-1F013A, Replaced MSRV body and pilot. C0172853 R0689523 PSV-041-1F013B, Replaced MSRV body and pilot. R0689525 PSV-041-1F013C, Replaced MSRV body and pilot. R0689527 & PSV-041-1F013D, Replaced MSRV body and pilot. C0169372 l R0689529 & PSV-041 1F013E, Replaced MSRV body and pilot. C0169375 R0689534 PSV-041-1F013F, Replaced MSRV pilot. R0689535 & PSV-041-1F013G, Replaced MSRV body and pilot. C0169373 R0689793 & PSV-041-1F013H, Replaced MSRV body and pilot. C0171696 R0692272 & PSV-041-1F013J, Replaced MSRV body and pilot. C0177106 R0692271 PSV-041-1F013K, Replaced MSRV body and pilot. R0698579 & PSV-041-1F013L, Replaced MSRV body and pilot. C0182090 R0692270 & PSV-041-1F013M, Replaced MSRV body and pilot. I C0169728 t
Section 3 Page 2 of 6 NIS-2 No, Description of Work R0692275 & PSV-041-1F013N, Replaced MSRV body and pilot. C0169374 R0692266 PSV-041-1F013S, Reworked and reinstalled MSRV pilot. C0178080 HV-041-1F028A, Replaced cover, poppet and pilot poppet. C0178102 HV-041-1F028B, Replaced cover, poppet and pilot poppet. C0178103 HV-041-1F028C, Replaced cover, poppet and pilot poppet. C0178104 HV-041-1F028D, Replaced cover, poppet and pilot poppet. R0690404 DBA-110-Ei, Replaced 1 stud & 2 nuts on reactor head instrument line. System 044: Reactor Water Clean-up C0172953 HV-044-1F040, Replaced commercial steelleak-off plug with ASME material and seal-welded. C0174228 044-1009A, Replaced 2" valve and adjacent pipe. C0177479 044-1034, Replaced 2" globe valve. C0178696 HV-044-1F039, Replaced 4" check valve. C0180547 PSV-044-108, Installed new piping and relocated relief valve. C0180548 PSV-044-109, installed new piping and relocated relief valve. System 045: RWCU Filter Domineralizers C0175585 PSV-045-1-62B, Replaced relief valve. C0178087 PSV-045-1-628, Replaced inlet piping and added flanges. System 047: Control Rod Drive R0691168 Replaced control rod drive at core location 10-27. R0691168 Replaced control rod drive at core location 14-39. R0691168 Replaced control rod drive at core location 14-51. R0691168 Replaced control rod drive at core location 18-15. R0691168 Replaced control rod drive at core location 22-07. R0691168 Replaced control rod drive at core location 22-23. R0691168 Replaced control rod drive at core location 22-31. R0691168 Replaced control rod drive at core location 26-07. R0691168 Replaced control rod drive at core location 30-03. C0180035 Replaced control rod drive at core location 30-31. l
l Section 3 Page 3 of 6 NIS-2 No. Description of Work R0691168 Replaced control rod drive at core location 30-39. R0691168 Replaced control rod drive at core location 30-43. R0691168 Replaced control rod drive at core location 30-59. R0691168- Replaced control rod drive at core location 34-19. C0180035 Replaced control rod drive at core location 34-35. C0180035 Replaced control rod drive at core location 38-31. R0691168 Replaced control rod drive at core location 42-31. j R0691168 Replaced control rod drive at core location 46-19. R0691168 Replaced control rod drive at core location 46-47. R0691168 Replaced control red drive at core location 46-55. R0691168 Replaced control rod drive at core location 50-23. R0691168 Replaced control rod drive at core location 50-27. R0691168 Replaced control rod drive at core location 50-39. System 048: Stand-by Liauld Control i R0617867 XV-048-1F004A, Replaced inlet fitting and trigger body on explosive j valve. System 049: RCIC C0179234 HV-049-1F031, Drilled relief hole in gate valve wedge to prevent pressure locking. Replaced commercial steel leak-off plug with ASME material. C0179864 HV-049-1F029, Drilled hole in gate valve wedge to prevent pressure locking. C0180538 HV-049-1F060, Replaced commercial steel leak-off plug with ASME material. C0181382 HV-049-1F080, Replaced commercial steel leak-off plug with ASME material. l System 051: Residual Heat Removal l l C0156675 051-1F031C, Replaced commercial steel leak-off plug with ASME material and seal welded. C0166574 HV-051-1F007A, Replaced commercial steelleak-off plug with ASME material and seal welded. C0169382 HV-051-1F017D, Drilled hole on high pressure side of valve wedge to prevent pressure locking. C0169532 GBB-119, installed valve by-pass. C0175090 HV-051-1F003B, Replaced commercial steelleak-off plug with ASME material. u______________--_-.___________________________--
Section 3 Page 4 of 6 NIS-2 No. Description of Work C0178937 HV-051-1F016A, Drilled relief hole in gate valve wedge to prevent pressure locking. Replaced leak-off plug with ASME material. , C0178944 HV-051-1F0168, Drilled relief hole in gate valve wedge to prevent l pressure locking. C0179731 HV-051-1F017A, Completed in-body valve enhancement mod. C0179739 HV-051-1F0178, Completed in-body valve enhancement mod. C0179741 HV-051-1F017C, Completed in-body valve enhancement mod. C0179742 HV-051-1F017D, Completed in-body valve enhancement mod. C0179977 051-1193, Installed new 20" flanged butterfly valve. HBB-118-H01, Replaced welded lugs and hanger rods. C0180158 MOD P00285, A-RHR Suction Strainer Replacement. C0180192 MOD-P00285, B-RHR Suction Strainer Replacement. C0180196 MOD-P00285, C-RHR Suction Strainer Replacement. C0180198 MOD-P00285, D-RHR Suction Strainer Replacement. C0181359 HBB-119-1, Replaced 3 flange studs and 4 nuts. , C0182169 & 051-1F065C, Replaced commercial steelleak-off plug with ASME C0179931 material and seal welded. C0182173 051-1F065A, Added additional weld metal to seal weld. R0544011 051-1F065D, Replaced commercial steelleak-off plug with ASME material and seal welded. R0544752 051-1F060B, Seal welded valve packing leak-off plug. System 052: Core Spray C0172617 GBB-113-1, installed %" bypass around valve 052-1F003A. C0177851 HV-052-1F005, Drilled 1/8" relief hole in gate valve wedge to prevent pressure locking. C0179416 052-1F007A, Replaced commercial steelleak-off plug with ASME material and seal welded. C0180179 MOD-P00285, A-Core Spray Suction Strainer Replacement.
i I i Section 3 Page 5 of 6 NIS-2 No, Description of Work C0180239 MOD-P00285, B-Core Spray Suction Strainer Replacement. C0180240 MOD-P00285, C-Core Spray Suction Strainer Replacement. C0180251 MOD-P00285, D-Core Spray Suction Strainer Replacement. C0181208 HV-052-1F015A, Replaced commercial steelleak-off plug with ASME material. R0544065 HV-052-1F004A, Replaced commercial steelleak-off plug with ASME material and seal welded. R0544175 HV-052-108, Replaced commercial steel leak-off plug with ASME material and sealwelded. System 055: Hiah Pressure Coolant inloction C0172374 EBB-108-H009, Replaced hanger struts and end brackets. C0177358 HV-055-1F001, Replaced 12" steam admission valve. EBB-129-H17, Modified pipe support. C0178114 HV-055-1F042, Drilied 1/8" relief hole in gate valve wedge to prevent pressure locking. Replaced commercial steelleak-off plug with ASME material. C0179933 HV-055-1F072, Replaced wedge guide and stem. Weld repaired valve disc. Replaced commercial steelleak-off plug with ASME material. , C01804S6 HV-055-1F015, Added seal weld valve packing leak-off plug. R0532790 055-1F077 & 055-1F078, Replaced check valves and adjacent pipe. R06641E6 055-1048 & 1049, Replaced check valves, adjacent pipe and pipe supports. System 056: HPCI Pump & Turbine l R0545502 F SE-056-1D003, Replaced HPCI rupture disc. R0545504 PSE-056-1D004, Replaced HPCI rupture disc. System 057 C_ontainment Atmosphere Control l C0181804 HV-057-131, Replaced 6" butterfly valve. System 060 Primary Containment C0180375 X-200A, Replaced 4 nuts on suppression pool hatch. j i l l i
Section 3 Page 6 of 6 NIS-2 No. Description of Work R0690404. 10-S201, Replaced 1 stud and 1 nut on drywell head flange. C0180179 X-206A, Modified containment penetrations for installation of suction C0180239 X-206B strainer supports. C0180240 X-206C C0180251 X 206D System 061: Liauid Radwaste C0178414 HV-061-110, Replaced commercial steelleak-off plug with ASME materia l. System 103: Snubbers A1091146 Replaced mechanical snubbers and attachment hardware. 1 A109209i i A1000354 I l l
FORM NIS-2 OWNER S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI t
- 1. Owner PECO Enercy Comoany Date June 30,1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Lirnerick Generatina Station Unit 1 Name P1; Box 2300. SanatoJa. PA 19464-2300 Work Order No. C0170342 Address Repar Organaatson P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code SymbolStamp N/A Name Authoraation No. N/A P O Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of Sys:em Er 7raency Service Water (System 011) Line No HBC-143 and HBC-152
- 5. (a) Apphcable Construction Code ASME lil 19 74 Edition, Winter 74 Addenda N-416-1 Code Case (b) Applicable Edition of Section XI Utilaed for Repers or Replacements 19 96
- 6. Identlicatec of Components Repaired or Replaced and Replacement Cv.ver-6ii, Repaired, -
ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identdicahon Repiaament Stamped (Yes or No) HBC-143-3 PIECE # 1 WFl NUCLEAR HEAT # N/A
- 114-92056 N/A REPLACEMENT NO COUPLING 946VNA HBC-152-3 PIECE # 1 WFI NUCLEAR HEAT # N/A
- 114-92056 N/A REPLACEMENT NO COUPLING 946VNA
- Traceability per PECO Part Code Number
- 7. Description of Work Installed %" welded hose connections
- 8. Tests conducted: Hydrostatic D Pneurnatic 0 NominalOperstmg Pressure a Other , Pressure 135 osi Test Temp. N/A 'F. .
NOTE: Supplemental sheets in form of hsts, sirstches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered anr1 the number of sheets it recorded at the top of this form. ( i
W/O No. C0170342 Sheet 2 of 2 i FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enoineerino Chanoe Reouest# 96-01472.
Apphcable Manufacturers Data Reports to be attached a CERTIFICATE OF COMPLIANCE We certify that the statements rnade in the report are corred and this roolacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzation No. NA Expiration Date NA Signed O N _ ____ ' J H KRAMER. Enaineer Date July 1. .1998 vOwnervor Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a vahd commission issued bv the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B l & l Company of Hartford. CT . . have the -W,44. descnbod in this Owners Report dunng the penod ///ES/M to 7 IM 985 . and state that to the best of my knowledge and belief, the Owner has perforrfied examinahons and takeh con 6ctive measures desenbod in this Owner's Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the j examinabons and corrective measures described in this Owners Report. Furthermore, neitter the inspedor nor his employer shall be Cable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspechon. Commissions PA-24971.N & A inspectors Sgnature / Nabonal Board, State, Province, and Endorsements Date 2 0 19 I S
/
(12/82) l I 1 l l l l f
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date June 30.1998 Narne 2301 Markat Street. Philadelphia PA 19101 Sheet 1 of 2 Address
- 2. Plant Umerick Genaratino Station Unit Name 1
)
P O. Box 2300. Sanatoaa, PA 19464-2300 Work Order No C0170450 Address Repair Organization P.O. No., Job No, etc.
- 3. Work Performed by PECO Eneroy Cornpany Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Ememency Service Water (System 011) Line No HBC-138 and HBC-147
- 5. (a) Appleable Construction Code ASME Ill 19 74 N-416-1 Code Case Editen. Winter '74___ Addenda. 1 (b) Applicable Editon of Section XI Utilized for Repairs or Repia ments 19 86
- 6. Identification of Components Repaired or Replaced and Replacerrent Components I
Repaired. ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code ) Component Manufacturer Serial No. Board No. loentrr caton Replacement Stamped (Yes or No) HBC-138-3 PIECE # 1 WFI NUCLEAR HEAT # N/A
- 114-92056 N/A REPLACEMENT NO COUPLING 810XNA HBC-147-3 PIECE # 1 WFI NUCLEAR HEAT # N/A
- 114-92056 N/A REPLACEMENT NO COUPLING 810XNA
- f
- Traceability per PECO Part Code Number
- 7. Description of Work installed %" welded hose connections.
- 8. Tests conducted: Hydrostatic D Pneumatic D NominalOperating Pressure a Other. Pressure 125 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
l l W/O No. C0170450 Sheet 2 of 2 l l l FORM NIS-2 (BACK)
- 9. Remarks Work completed in accotlance with PECO Enaineerina Chance Reauest# 96-01515.
Applicable Manufacturers Data Reports to be attached l l l l CERTIFICATE OF COMPLIANCE We certify that the statements rnade in the report are conect and this replacement mnforms to the rules of the ! ASME Code, Sedion XI. reper or replacement r Type Code SymbolStamp NA l Certficate of Authonzation No. NA Expiration Date NA Signed b < . - J H KRAMER. Enoineer Date July 1. .1998 0Owneror
" OwnersDesignee, Title CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commission issued by the Natonal Board of Boiler and Pressure Vessel inspedors and the State or Province of Pennsylvania and employed by H S B 1.8 l. Company of Hartford. CT have the components desenbod in this Owners Report dunng the period /M/9/94. to / 2M M . and state that to the best of my knowledge and belief, the Owner has perfo(med exarmnatens and taldo cor(ectve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Secten XI.
By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or imphed, conceming the examinatens and corrective measures desenbod in this Owners Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecten
~
! / Commessons PA-2497 f.N & A . Inspectors Signature
/ Natonal Board, State, Province, and Endorsements Date 7 819 9b
' l l
(12/82)
]
l o
i l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Scchon XI
- 1. Owner PECO Enerav Company Date June 30.1998
, Narne l l 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name l P.O. Box 2300. Sanatoca PA 19464-2300 Work Order No. C0176847 Address Repar Organeaton P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code SymbolStamp N/A Name Auitivia.6,i. No.
N/A P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A L Address
- 4. Identification of System Emeraency Service Water (System 011) Line No HBC-145-1
- 5. (a) Applicable Construction Code ASME fil 19 74 Edition. Winter '74 Adder'da. N416-1 Code Case (b) Applicable Edibon of Section XI Utileed for Repairs or Replacements 19 86 i
- 6. Identification of Components Repaired or Replaced and Replacement Components '
Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No, identificahon Replacement Stamped (Yes or No) l HBC-148-1 Pot 27,28,29 U.S. STEEL HEAT # N/A
- 114-90061 N/A REPLACEMENT NO 4" PIPE N87139 +
HBC 1451 B.K.L., PIECE # 26 FITTINGS HEAT # V1502 N/A
- 114-91906 N/A REPLACEMENT NO 4* TEE LTD.
- Traceability per PECO Part Code Number
' 7. Description of Work Replaced 4* oipina
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure e Other_ Pressure 118 osi Test Temp. N/A 'F.
I NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and tht, number of sheets is recorded at the top of this form.
W/O No. C0176847 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Non4onformance Report 97-01550.
Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPL!ANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorgstion No. NA Expiraton Date NA Signed C LNdL. "" J H KRAMER. Enaineer Date July 1. .1998 G" Owner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B I & l. Company of Hartford. CT have inspt:ted the components described in this Owners Report dunng the penod 4//2/97 to .7/28/9R , and state that to the best of my knowledge and belief, the Owner has performed exammat ons and tAen cofrective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conmming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shau be hable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. d4/ / M e Commissions PA-2497 f.N & A Inspectors Signature Natonal Board, State, Province, and Endorsements Date 2C 19
/
(12/82)
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI
- 1. Owner PECO Eneroy Company Date Juie 30.1998 Name 2301 Market Street. Philadelo5ia. PA 19101 Sheet 1 of 2 Address ,
- 2. Plant Limerick Generatino Station Unit 1 Name P.O Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0176849 I Address Repair Organizaten P.O. No., Job No, etcL
- 3. Work Performed by PECO Eneroy Company Type Code SymbolStamp N/A t Narne Authonzabon No. N/A 1
P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address 1
- 4. Identificat.on of System Emeancy Service Water (System 011) Line No HBC-? 52-1
- 5. (a) Applicable Construction Code ASME lif 19 74 Eddion. Winter '74 Addenda. N-416-1 Code Case (b) Apphcable Eddion of Sechon XI Utezed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components I Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Idenbfication Replacement Stamped (Yes or No)
HBC 152-1 PIECE # 7 U.S. STEEL HEAT # N/A ' 114-90063 N/A REPLACEMENT NO 8" PIPE A03909 l l Traceability per PECO Part Code Number i 1
- 7. Desenphon of Work Replaced 8* Dioino
- 8. Tests conducted: Hydrostatic 0 Pneumatic D NominalOperatmg Pressure e Other_ Pressure 115 osi TestTemp. N/A *F.
( NOTE: Supplemental sheets in form of lists, sketches, or dramngs may be used, provided (1) size 81/2 in. x 11 in., (2) informa-l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
I W/O No. C0176849 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Non Cw.fu .. ..c6 Report 97 01349.
Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements rnade in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorizabon No. NA Expwabon Date NA Signed b .N. J H. KRAMER. Enaineer Date July 1. .1998 O- Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commeston issued by the Nabonal Board of Boiler and Pressure Vessel inspedors and the State or Province of Pennsvtvania and employed by H S B I.& l. Company of Hartford. CT . have' the components descnbod in this Owners Report dunng the penod 6//2/f7 to 7 M . and state that to the best of my knowledge and belief, the Owner has perfonned 6xamenahons and takbn oosfectne measures described in this Owners Report in amordance with the requirements of the ASME Code, Seden XI. By signing this certi6cate neither the inspedor nor his employer makes any warranty, expressed or implied, concoming the examinations and corredive measures descnbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection.
- N Commesens PA-2497 l.N & A
, inspectors Signature / Natenal Board, State, Prtmnce, and Endorsements Date 7//d 1g 98 f p i (12/82) I L
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI l l
- 1. Owner PECO Enemy Company Date July 16.1998 l
Name ' i 2301 Market Street. Philadebbia, PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit i Name i'
P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No R0689418 and C0172853 Address Repair Organnaten P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Author 2ation No. N/A i l P.O Box 2300. Sanatoaa. PA 19464-2300 Expirati6n Date N/A
! Address
- 4. Identification of System Nuclear Boiler (System 041) Line No. APE-1MS PSV-041-1F013A
- 5. (a) Apphcable Construction Code ASME 111 19 66 Edition. Summer 1970 Addenda, N/A Code Case
, (b) Applicable Edition of Section XI Utilmed for Repairs or Replacements 19 86 l
- 6. Identification of Components Repaired or Replaced and Replacement Components l
, Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code l Component Manufacturer Serial No. Doard No. Identification Replacement Stamped (Yes or No) MSRV PILOT TARGET 525 N/A N/A N/A REPLACEMENT NO l ROCK l j MSRV BODY TARGET 164 N/A N/A N/A REPLACEMENT YES ROCK i l l l
- 7. Description of Work Replaced Main Steam Relief Valve S/N 168 and oilot S/N 524 with reworked body S/N 164 and oilot S/N 525.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other. Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. R0689418 & C0172853 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Rernarks Manufacturers Data Report is traceable by PECO Work Order packsoe.
Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed 1- N , N- J H. KRAMER . Enaineer Date July 16 .19 98
@ner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l & 1 Company of Hartford. CT have j'nspecjed the components desenbod in this Owners Report dunng the period 2 // C /SP B to 7/27/9A . and state that to the best of my knowledge and belief, the Owner has'perforfhed examinations and takfen coffechve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.
By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and correebve measures described in this Owners Report. Furthermore, neithei die Inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
## Comrmssions PA-24971.N & A inspectors Signature / Nabonal Board, State, Province, and Endorsements Date l E l 1g Y 8
/
(12/82)
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Company Date July 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 3. Plant Limerick Generatina Station Unit 1 Name P O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0689523 Address Repar Organizaten P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A I Name AuW/.24n,n No. N/A P O. Box 2300. Sanatoca. PA 19464-2300 Expraten Date N/A i Address II
- 4. Identification of System Nuclear Boiler fSystem 041) Line No. APE 1MS PSV-041-1F0138 0, (a) Applicable Construction Code ASME lli 19 68 Edition. Summer 1970 Addenda. N/A Code Case (b) Applicable Eddion of Section XI Utilized for Repaws or Replacements 19 86
- 6. Identification of Components Repaired or Replamd and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Reptamd, or Code
. Component Manufacturer Serial No. Board No. Identificahon Replacement Stamped (Yes or No)
MSRV PILOT TARGET 517 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 183 N/A N/A N/A REPLACEMENT YES ROCK
- 7. Description of Work Replaced Main Steam Relief Valve S/N 185 and ollot S/N $09 with reworked body S/N 183 and pilot S/N 517.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure a Other., Pressure 1050 osi Test Temp. 165 'F, NOTE: Supplemental sheets la form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) infomw tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
1 i W/O No. R0689623 j Sheet 2 of 2
)
FORM NIS-2(BACK)
- 9. Rernarks Manufacturers Dets Rooort is tramable by PECO Work Order neckane Applicable Manufacturers Data Reports to be attached l
t i l CERTIFICATE OF COMPUANCE We certify that the statements made in the soport are coned and this raciacement conforms to the rules of the ' ASME Code, Section XI, repair or sepiscoment Type Code SymbolStamp NA Certificate of Authorizaten No. NA Expwahon Date NA
. Signed b N. = - J.H. KRAMER . Enaineer Date July 16 .19 98 4
%wner or Owners Designes, Title
)
- CERTIFICATE OF INSERVICE INSPECTION j 1, the undersigned, holding a valid commissen issued by the Nabonel Board of Boiler and Pressure Vessel inspectors and the State or Provina of Pennsvivania and employed by H.S.B.I.& l. Company of Hartford. CT .
havp inspapted the components coscribed in this Owners Report during the penod 2 //o /f L to 7/E7/98 . and state that to the best of my knowledge and belief, the Owner has perldemesfenaminstons and isken cdneeve measures descwlbed in this Owners Report in accordance with the recluwoments of the ASME Code, Seeon XI. By signing this certificate neither the inspector nor his employer rnakes any warranty, expressed or imphed, concoming the examinations and corrective measures descreed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection. 8nW, , Commessons PA-24971.N & A
' inspectors Signeure . / Nanons Board, State. Prmance, and Endorsements cate 7/27se98
.i (12/82) l l
l i l I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Company Date Jutv 16.1998 Name l
2301 Madet Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 l Name P.O Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0689525 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A ,
Name Authonzation No. N/A l I P O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) Line No APE-1MS PSV-041-1F013C
- 5. (a) Applicable Construc' ion Code ASME Ill 19 68 Edition. Summer 1970 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components l
Repaired, ASME . Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificatxm Replacement Stamped (Yes or No) MSRV PILOT TARGET 1213 MA MA N/A REPLACEMENT NO ROCK MSRV BODY TARGET 184 N/A N/A N/A REPLACEMENT YES ROCK (1) HEX BOLT TARGET HEAT CODE N/A
- 114-76041 N/A REPLACEMENT NO PART# ROCK *DNP*
103580-1
- Traceability per PECO part code number,
- 7. Desenption of Work Replaced Main Steam Relief Valve S/N 172 and Dikd S/N 525 with reworked body S/N 184 and pilot S/N 1213
- 8. Tests conducted: Hydrostatic 0 Pneumatic D NominalOperating Pressure e Other. Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 tnrough 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this fomt
l W/O No. R0689525 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Report is traceable by PECO Work Order packane.
Apphcable Manufadurers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this roolacement conforms to the rules of the ASME Code, Section XI. reper or replacement Typa Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b bb J H KRAMER. Enoineer Date Juhr16 .19 98 (Uner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commason issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivanie and employed by H S.B l.& l. Company of Hartford. CT haq inspapted the components descnbod in this Owners Report during the penod 2/1o/98 to 7/27/98 . and state that to the best of my knowledge and belief, the Owner has peffom6d examinatens and talken cdtractive measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or impfed, conoeming the examinations and corrective rnessures desenbod in this Owners Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner ny personalinjury or property damage or a loss of any kind arising from or conneded with this inspect'on.
# Commesions PA-2497 f.N & A Inspectors Sgnature # Natonal Board, State, Provoce, and Endorsements Date 7b7
/
19 98
- (12/82) l-i
)
l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Sechon XI l l l
- 1. Owner PECO Eneroy Comoany Date July 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address l 2. Plant Limerick Generatina Station Unit 1
[ Name P.O. Box 2300, Sanatoaa. PA 19464-2300 Work Order No. R0689527 and C0169372 Address Repair Organizabon P.O. No., Job No. etc. l 1
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A ,
P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System _ Nuclear Boiler fSystem 041) Line No. APE-1MS PSV-041-1F013D
- 5. (a) Applicable Construction Code ASME Ill 19 68 Edition, Summer 1970 Addenda. N/A Code Case I (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Reptamment Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identif. cation Replamment Stamped l
(Yes or i No) MSRV PILOT TARGET 508 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 157 N/A N/A N/A REPLACEMENT YES ROCK MAIN DISC PART# TARGET 3370 N/A N/A 1992 REPLACEMENT YES 200848-1 ROCK
- 7. Description of Work Replaced Main Steam Relief Valve S/N 193 and Dilot S/N 526 with reworked body S/N 157 and pilot S/N 508.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NommalOperating Pressure a Other_ Pressure 1050 osi Test Temp. 165- 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawir gs may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
W/O No. R0689527 & C0169372 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufac*urers Data Report is traceable by PECO Work Order oscksoe.
Appicable Manufacturers Data Reports to be attached l CERTIFICATE OF COMPLIANCE We certify that the staternents rnade in the report are correct and this repla ment conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certifcate of Authorization No. NA Expration Date NA Signed M.b J H. KRAMER . Enoineer Date JuN 16 .19 98
@ner or (%ner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION l
1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of Pennsvivania and employed by H S.B I & l. Company of Hartford. CT have' the components desenbod in this Owners Report during the period 3//2./5V., to 727 98 . and state that to the best of my knowledge and belief, the Owner has pefformdd examinatens and tafen cdfrective measures descrit,ed in this Owner's Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective rreasures described in thia Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind aribing from or connected with this inspection. MM Commissions PA-24971.N 8 A inspectors Signature
/ National Board, State, Provence, and Endorsements Date , U 19 9 8 (12/82) l i
I i l l I 1 i
\
t i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Sechon XI l , 1. Owner PECO Eneroy Company Date July 16.1998 Name 2301 Market Sti set. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0689529 and C0169375 Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Comoany Type Code Symbol Stamp N/A ,
Name Authorizaten No. N/A ,, P.O. Box 2300. Sanatoos. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler fSystem 041) Line No APE-1MS PSV-041-1F013E
- 5. (a) Applicable Construction Code ASME fil 19 68 Edition, Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Seebon XI Utdized for Repairs or Replacements 19 86
- 6. Identdication of Components Repaired or Replaced and Replacement cst @-,a.
Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) MSRV PILOT TARGET 530 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 179 N/A N/A N/A REPLACEMENT YES ROCK
- 7. Description of Work Replaced Main Steam Relief Valve S/N 166 and Dilot S/N 518 with reworked body S/N 179 and pilot S/N 530.
- 8. Tests conducted: Hydrostatic 0 . Pneumatic 0 NominalOperating Pressuja a Other_ Pressure 1050 osi Test Temp. 165 *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (;>) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. R0689529 & C0169375 bheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks i manufacturers Data Report is traceable by Pt:CO Work Order oscksoe.
Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements rnade in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed 1 N,N J.H. KRAMER . Enoineer Date- Jutv 16 .19 98 CWner or Owners Designee, Tale i CERTIFICATE OF INSERVICE INSPECTION l, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B.I.& l. Company of Hartford. CT . havp' the components desenDed in this Owners Report during the penod W/0/965 to '7/2E . and state that to the best of my knowledge and belief, the Owner 6as p6tformed examinations and then cofractrve measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspecor nor his employer makes any warranty, expressed or imphed, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
+
I #1G 8if - Commissions PA-24971.N & A Inspectors Signature / Nabonal Board, State, Province, and Endorsements Date 7!2819 $PB
/
(12/82) ( l i
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provhuons of the ASME Code Gection XI
- 1. Owner PECO Eneroy Company Date July 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Name p O. Box 2300. Sanatoca. PA 19484-2300 Work Order No. R0689534 Address Repair Organization P.O. No.. Job No. etc.
- 3. Work Perforrned by PECO Eneroy Comoany Type Code Symbol Stamp N/A Name Authonzabon No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Exprabon Date N/A ,
Address l
- 4. Identification of System Nuclear Boiler (System 041) Line No APE-1MS PSV-041-1F013F
- 5. (a) Applicable Construction Code ASME lil 19 68 Edition. Summer 1970 Addenda N/A Code Case j (b) Applicable Edition of Section XI Utihzed for Repairs or Replacements 19 86 l l
- 6. Identification of Components Repaired or Replaced and Replacement Components l Repaired, ASME Name of Name of Manufacturer National Other Year Buit Replaced, or Code Component Manufacturer Serial No. Board No. Identincehon Replacement Stamped l Umw l No)
MSRV PILOT TARGET 507 N/A N/A N/A REPLACEMENT NO ROCK l
- 7. Description of Work Replaced Main Steam Relief Valve pilot S/N 535 with reworked pilot S/N 507.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure m Other _ Pressure 1050 osi Test Temp. 165 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. R0689534 Sheet 2 of 2 ; 3 FORM NIS-2 (BACK)
- 9. Remarks None.
Applicable Manufacturers Data Fuports to be attached CERTIFICATE OF COMPl. LANCE We certify that the statements made in the report are correct and this replacement conforms to the fules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expuaton Date NA Signed ( w N.N J H. KRAMER , Enaineer Date Jutv 16 .19 98 IC wner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B.I & l. Comosny of Hartford. CT . . have the components descnbed in this Owners Report during the penod 71/o/9E to 7 2B B . and state that to the best of my knowledge and belief, the Owner hasterfdrmed examanatens and 1Aen cofrective measures descnbod in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions PA-24971.N & A Inspectors Signature [ Natonal Board, State Province, and Endorsements Date 22 1978
/
(12/82) l l 4
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date July 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Umerick Generatino Station Unit 1 Name P.O Box 2300. Sanatoca. PA 19464-2300 Work Order No R0689535 and C0169373 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enernv Company Type Code Symbol Stang N/A Name Authorization No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nudear Boiler (System 041) Line No. APE-1MS PSV-041-1F013G i
- 5. (a) Applicable Construction Code ASME til 19 68 Edition, Summer 1970 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identdication of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
MSRV PILOT TARGET 529 N/A N/A N/A REPLACEMENT NO ROCK MSRVBODY TARGET 162 N/A N/A N/A REPLACEMENT YES ROCK PILOT BODY TARGET 377 N/A
- 114-76020 1997 REPLACEMENT NO ROCK
- Traceability per PECO part code number.
- 7. Desenption of Work Replaced Main Steam Relief Valve SN 181 and pilot SN 513 with reworked body SN 162 and pilot SN 529
- 8. Tests conducted; Hydrostatic O Pneumatic D NominalOperating Pressure a Other _ Pressure 1050 osi Test Temp. 165 *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. R0689535 & C0169373 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Rema,ts Manufacturers Data Report is traceable by PECO Work Order packaoe Applicable Manufadurers Data Reports to be attached i
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed nm M . vwner or Owners Desgnee, Title J H KRAMER , Encineer Date July 16 .10 98 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and ernployed by H S B I & l. Company of Hartford. CT . havp insppcted the components desenbed in this Owners Report dunng the period '7 //o / M 5 to '7/283/FA . and state that to the best of my laowledge and belief, the Owner has perfbnnefd examinations and 16 ken c6rrecbve measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corredive measures described in this Owners Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. $ N Commissions PA-24971.N & A inspectors Sgnature / Nabonal Board, State, Province, and Endorsernents Date 2 8 19 90
/
(12'82)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI
- 1. Owner PECO Eneroy Company Date Jutv 16.1998 Name 2301 Market Street. Philadelphia, PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit i Name P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No R0689793 and C0171696 Address Repair Organnaten P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Author 2aton No. N/A P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) Line No APE-1MS PSV-041-1 F013H
- 5. (a) Applicable Construction Code ASME lil 19 68 Edition. Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilmed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacernent Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificaten Replacement Stamped (Yes or No)
MSRV PILOT TARGET 532 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 193 N/A N/A N/A REPLACEMENT YES ROCK (3) 5/8" NUTS PART# TARGET HEAT # 79450 N/A N/A N/A REPLACEMENT NO 103567-1 ROCK
- 7. Description of Work Replaced Main Steam Relief Valve S/N 190 and pilot S/N 533 with reworked body S/N 193 and pilot S/N $32
- 8. Tests conducted: Hydrostatic D Pneumatic 0 NominalOperating Pressure m Other_ Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l L--________..____
W/O No. R0689783 & C0171696 i Sheet 2 of 2 ' l l FORM NIS-2 (BACK) { l
- 9. Remarks Manufacturers Data Report is traceable by PECO Work Order oscksoe. 1 Apphcable Manufacturers Data Reports to be attached {
1 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. reparor replacement Type Code Symbol Stamp NA Cert!ficate of Authorization No. NA Expiration Date NA Signed Omm M . b J H. KRAMER . Enaineer Date JuN 16 .19 98
&ner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Bc4 rd of Boiler and Pressure Vessel Inspedors and the State or Province of Pennsylvania and employed by H S B l & l. Company of Hartford. CT . . have' the components desenbed in this Owners Report dunng the period "21/0/ 9A to 7 28 98 . and state that to the best of my knowledge and belief, the Owneinalfs performed examinatens and taksn cursctue measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector not his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
& ~
Commissions PA-2497 f.N & A Inspectors Signature / National Board, State, Prownce, and Endorsernents Date 7 2810 V8 f (12/82) l l
)
l l J
FORM NIS-2 OWNERS REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date Jutv 16.1998 Name 2301 Market Street, Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Name P.O. Box 2300. Sanatnaa. PA 19464-2300 Work Order No. R0692272 and C0177106 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoos. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) Line No APE-1MS PSV-041-1 F013J
- 5. (a) Applicable Construction Code ASME Ill 19 68 Edition, Summer 1970 Addenda. N/A Code Case (b) Applicable Edition of Section XI Ut& zed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
MSRV PILOT TARGET 512 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 177 N/A N/A N/A REPLACEMENT YES ROCK (1) 5/8" NUT PART# TARGET HEAT # N/A
- 114-76049 N/A REPLACEMENT NO 103567-1 ROCK 8094962 MAIN DISC PART# TARGET 4540 N/A
- 114-76023 1992 REPLACEMENT YES 200848-1 ROCK MAIN SEAT PART# TARGET S/N 51 N/A N/A N/A REPLACEMENT NO 205552-1 ROCK HEAT # 94809
- Traceability per PECO part code number.
- 7. Desenption of Work Replaced Main Steam Relief Vane S/N 183 and pilot SH 526 with reworked body S/N 177 and pilot S/N S12.
l 8. Tests conducted: Hydrostatic 0 Pneumatic O NominalOperating Pressure a1 Other _ Pressure 1050 osi Test Temp. 165 *F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is reccrded at the top of this form. I
W/O No. R0692272 & C0177106 Sheet 2 of 2 FORM NIS-2 (BACK)
- g. Remarks Manufacturers Data Report is traceable by PECO Work Order packsoe.
Applicable Manufacturers Data Reports to be attached l l 1 l l CERTIFICATE OF COMPUANCE 1 l We certify that the statements rnade in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement ; Type Code Symbol Stamp NA Certificate of Authorization Nc. NA Expiration Date NA Signed I N M .h _ J H. KRAMER . Enoineer Date July 16 .19 98 (vner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State j or Province of Pennsylvania and employed by H S B 1.81. Company of Hartford. CT have the components desenbod in this Owners Report dunng the period 21/O/98 to 7 'ZM 98 . and state that to the best of my knowledge and belief, the Owner has perfor(ned examinations and taken con 6ctive rneasures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sedion XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
## Commissions PA-24971 N & A inspectors Signature
[ National Board, State, Province, and Endorsements Date 28 1998
/
(12/82) i 1 i
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of tne ASME Code Secbon XI
- 1. Owner PECO Enerav Company Date July 16.1998 Name 2301 Market Street. Philadethis. PA 19101 Sheet i of 2 Address
- 2. Plant Limerick Generatina Station Unit _ 1 Name P O. Box 2300. Sanatoca. PA 19464-2300 Work Orrier No. R0692271 Address Repair Organkation P.O. No.. Job No. etc.
- 3. Work Performed by PECO Eneray Lompany Type Code Symbol Stamp N/A Narne Authormaton No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Addrum
- 4. Identification of System Nuclear Boiler (System 041) Line No. APE-1MS PSV-041-1F013K
- 5. (a) Applicable Construction Code ASME lit 19 68 Edition. Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Sechon XI Utalced for Repairs or Replacements 19 86
- 3. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
MSRV PILOT TARGET 1209 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 186 N/A N/A N/A REPLACEMENT YES ROCK 1
- 7. Desenption of Work Replaced Main Steam Relief Valve S/N 191 and pilot S/N 515 with reworked body S/N 186 and pilot S/N 1209
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure u Other _ Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) she 81/2 in. x 11 in., (2) Informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/3 No.R0692271 Sheet 2 of 2 FORM NIS-2 (SACK)
- 9. Remarks Manufacturers Data Report is traceable by PECO Work Order osckane Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are corvoci and this replacement conforms to the rules of the ASME Code, Section XL repeir or replacement Type Code Symbol Stamp NA Certificate of Authornaten No. NA Expiration Date NA
. Signed &- . -
J.H. KRAMER . Enoineer Date Juhr16 .19 96 6 Amer or Owners Designes, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commesion issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State of Province of Pennsylvania and employed by H S.B l & l. Comosnv of Hartford. CT howp @'the components descrbed in this Owners Report during the period 11/o/FM to_7/2X/98 to the best of my knowledge and belief, the Owner has flerforfned exarvunstens and6 ken cdnectwo measures desenbod in this
. and state that Owners Report in accordance with the requwements of the ASME Code, Secten XI.
By signing this cert $cate neither the inspector not his employer rnehas any warranty, expressed or implied, concoming the examinations and corredsve measures described in this Owners Report. Furthermore, neither the inspedor nor his employer shall be .4ble in any manner for any personaliriury or property damage or a loss of any kind arising from or connected with this inspection. h PA-24971.N & A Inspectors Sgnature [ Nabonal Board, State, Pnmnce, and Endorsements Date 7 '1998
/
(12/82)
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Seda XI
- 1. Owner PECO Enemy Company Date July 16.1998 Name 2301 Market Street, Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatina Station Unit i Name P.O Box 2300. Sanatoas. PA 19464-2300 Work Order No R0698579 and C0182090 Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enemy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Senatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuciear Boiler fSystem 041) Line No APE-1MS PSV-041-1F013L
- 5. (a) Applicable Const etion Code ASME 111 19 68 Edition, Summer 1970 Addenda, N/A Code Case (b) Applicable EdWon of Section XI Utihzer.or Repairs of Replacements 19 86
- 6. Identification of Components Repaired o. Replaced and Replacement Components Repaired. ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. %lentdication Replacement Stamped (Yes or No)
MSRV PILOT TARGET 531 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 168 N/A N/A N/A REPLACEMENT YES ROCK MAIN SEAT PART# TARGET S/N 53 N/A N/A N/A REPLACEMENT NO 205552-1 ROCK HEAT # 94809
- 7. Description of Work Replaced Main Steam Relief Vatve S/N 155 and pilot S/N 521 with reworked body S/N 168 and pilot S/N 531.
- 8. Tests conducted: Hydrostatic C Pneumatic 0 NominalOperating Pressure a Other_ Pressure 955 osi Test Temp. 542 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is induded on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
I W/O No. R0698579 & C0182090 Sheet 2 of 2 FORM NIS-2 (BACK) O. Remarks Manufacturers Data Report is traceable by PECO Work Order oscksoe Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements rnade in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or replamment Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed bm h . b - J H. KRAMER . Enoineer Date July 16 .19'98 Givner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid mig skxi issued by the National Board of Boiler and Pr3ssure Vessel inspectors and the State or Province of - Pennsylvania and employed by H.S B I & l. Company of Hartford. CT have the components described in this Owners Report during the penod 2.//o /9 8 to 7 2A fB . and state that to the best of my knowledge and belief, the Owner has gferfon6ed examinations and talien cofroarve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector not his employer makes any warranty, expressed or implied, conoeming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
/ _
M Commissions PA-24971,N & A Inspectors Sqnature [ Nabonal Board, State, Province, and Endorsements Date EA 19 98
/
(12/82) l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enercy Company Date July 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet ,, 1 of 2 Address
- 2. Plant timerick Generatino Station Unit 1 Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0692270 and C0169728 Address Repair Organizatxm P.O. No., Job No. etc.
- 3. Work Performed by PECO Enercy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoar. PA 19464-2300 Expiration Date N/A Address j
- 4. Identification of System Nuclear Boiler (System 041) Line No. APE-1MS PSV-041 1F013M
- 5. (a) Applicable Construdion Code ASME fil 19 68 Edition, Summer 1970 Adderea, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replamment Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identdication Replacement Stamped (Yes or No)
MSRV PILOT TARGET 515 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 160 N/A N/A N/A REPLACEMENT YES ROCK
- 7. Description of Work Replaced Main Steam Relief Valve S/N 158 and pilot S/N 519 with reworked body S/N 160 and pilot S/N 515.
- 8. Tests conducted:. Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other_ Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. 4 _..r._..... .m_
W/O M. R0692270 & C0169728 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Report is traceable by PECO Work Order packaae.
Applicable Manufa<2urers Data Reports to be attached CERTIFICATE OF COMPLIANCE , We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b k. b J.H. KRAMER . Enoineer Gvner or Owners Designee, Title Date July 16 .19 98 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commrssion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l & l. Company of Hartford. CT _ . hav9 inspepted the components descnbed in this Owners Report dunng the period 'Z.//C/98 to '7/ 7 8 /9 8 . and state that to the best of my knowledge and belief, the Owner has pedorm6d exammations and tsken cofrectue measures described in this Owners Report in accordance with the requirements of the ASME Code Sedion XI. By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and correctrve measures desenbed in this Owners Report. Fuuhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection. Comrrussions PA-24971 N & A
' inspectors Signature / National Board, State, Province, and Endorsements Date A819 V8 r
(12/82) l l I l l
t l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ( As Required by the Provisions of the ASME Code Sedion XI
- 1. Owner PECO Enerav Company Date _.. Jutv 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatina Station Unit i Name P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0692275 and C0169374 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Sanatona PA 19464-2300 Expiration Date N/A Address l
- 4. Identification of System Nuclear Boiler l' (System 041) Line No. APE-1MS PSV 041-1F013N
- 5. (a) Applicable Construction Code ASME fil 19 68 Edition, Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
MSRV PILOT TARGET 163 N/A N/A N/A REPLACEMENT NO ROCK MSRV BODY TARGET 1214 N/A N/A N/A REPLACEMENT YES ROCK
- 7. Description of Work Repfsced Main Steam Relief Valve S/N 171 and pilot S/N $28 with reworked body S/N 163 and pilot S/N 1214
- 8. Tests conducted: Hydrostatic O Pneumatic 0 NominalOperating Pressure u Other , Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. R0692275 & C0169374 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Reoort is traceable by PECO Work Order necksae
)
Appicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this raciscement conforms to the rules of the ASME Code, Section XI. repair or repiamment Type Code Symbol Stamp NA CertHicate of Authorization No. NA Expwabon Date NA Signed bu M. N J.H. KRAMER . Enoineer Date July 16 .19 98 C uner or Owners Designee, Tine CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the Natiotal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S.B.f.& l. Company of Hartbrd. CT havy insp9cted tie components described in this Owners Report during the period 1/10/9E to 7/SA/98 . and state that to the best of my knowledge and belief, the Owner has gforfonfied examinsbons and 16 ken c6ereceve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By tigning this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conermng the examinations and correcuve measures descrbed in this Owners Report. Furthennore, neither the Inspedor nor his employer shall be liable in any manner for any personal iriury or property damage or a loss of any kind arising from or conneded with this inspection. N Commessons PA-2497 f.N & A inspectors Signature / Nabonal Board, State. Protnnos, and Endorsements Date 2819 98 om i i
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date JuN 16.1998 Name 2301 Market Street. PhiladeIDhia, PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. R0692266 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Comnany Type Code Symbol Stamp N/A Name Authorization No. N/A P O. Bor 2300. Sanatoca, PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) L;ne No. APE-1MS PSV 041-1F013S
- 5. (a) Applicable Construction Code ASME I!! 19 68 Edition, Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or j No) I l
l l
- 7. Description of Work Removed, reworked and reinstalled Main Steam Refef Valve pilot.
- 8. Tests conducted: Hydrostatic C Pneumate O NominalOperating Pressure a Other_ Pressure 1050 osi Test Temp. 165 'F.
l NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) infomw I tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l l l l
W/O No. R0692266 Sheet 2 of 2 FORM NIS 2(BACK)
- 9. Remarks None.
Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b M. C - J H KRAMER Enaineer Date Juhr is .19 98 Qvner of Owners Designee, Tale CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commasxxi issued by the National Board of Boiler and Pressure Vessel inspedors and the State or Province of Pennsylvania and employed by H S.B.I.& l. Company of Hartford. CT . havp inspepied the components desenbed in this Owner's Report during the period 2hoNA to 7MA/98 . and state that to the best of my knowledge and belief, the Owner has pdrfomied exarrunations and then cdrective measures descnbod in this Owners Report in accordance with the requirements of the ASME Code, Secten XI.- By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, conmming the examinations and corrective measures described in this Owners Report Furthermore, neither the inspector nor his employer shall be liat.le in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection. Commasons PA-24971 N & A inspectors S@ nature / Natonal Board, State, Province, and Endorsements Date 7, 2 8 19 9 8 (12/82) I
1 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Section XI l l
- 1. Owner PECO Eneroy Company Date June 30.1998 s Name 1 2301 Market Street. Philadefohia, PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Und 1 Name P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0178080 Address Repair Organization P.O. No., Job No, etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiraton Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) Line No. APE-1MS HV-041-1F028A
- 5. (a) Applicable Construction Code ASME 111 19 68 Edition,3/10/71 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Repta d and Replacement Components Repaired, .tSME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped I (Yes or l No) i POPPET ATWOOD & HEAT # Y3052 N/A
- 114-97625 N/A REPLACEMENT YES MORRILL S!N 9804K PILOT ATWOOD & HEAT # H8915 N/A
- 114-97625 N/A REPLACEMENT YES POPPET MORRILL S/N 6 ATWOOD & HEAT # Y3052 COVER MORRILL S/N 2 N/A
- 114-97625 N/A REPLACEMENT YES l
l
- Traceability per PECO Part Code Number
- 7. Desenption of Work Installed uporaded valve components in Main Steam isolaton Valve
- 8. Tests conducted: Hydrostatic O Pneumatic 0 NominalOperating Pressure a Other_ Pressure *050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l L
W/O No. C0178080 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Rernarks Manufacturers data reports are traceable by PECO Work Order oscksoe.
Applicable Manufacturers Data Reports to be attached Work cornoleted in accordance with PECO Enoineerina Chance Recuest# 97-01985. 1 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section Xt. repair or replacement Type Code SymbolStamp NA Certificate of Authorization No. NA Expiration Date NA Signed b - J H. KRAMER. Enaineer Date July 1. .1998 vOwner or Owner's Designee, Ttle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid cornrnission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B 1.81. Company of Hartford. CT . . havy insgeded the components dercribed in this Owner's Report dunn0 the period 4/N/fA to 7/2//98 . and state that to the best of my knowledge and belief, the Owner has pefforn6d examinations and t6 ken dorredue rneasures desenbed in this Owner's Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, conmming the examinations and corrective rneasures described in this Owner's Report. Furthem1 ore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions PA-24971.N & A inspectors Signature / National Board, State, Province, and Endorsements Oate 2 / 19 9 8 (12/82)
/
1 i
FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI j
- 1. Owner PECO Eneroy Company Date Jufv 14.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P.O. Box 2300. Senatoaa. PA 19464-2300 Work Order No C0178102 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) Line No. APE 1MS HV-041 1F028B
- 5. (a) Applicable Construction Code ASME lil Edition. 3/10/71 Addenda, N/A 19_68 Code Case (b) Appricable Edition of Section XI Utihzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
POPPET ATWOOD & HEAT # YO725 N/A
- 114-97625 N/A REPLACEMENT YES MORRILL S/N 3 1
- P' LOT ATWOOD & HEAT # H8915 N/A
- 114-97625 N/A REPLACEMENT YES POPPET MORRILL S/N 1 A1 WOOD & HEAT # YO725 COVER MORRILL S/N 3 N/A
- 114-97625 N/A REPLACEMENT YES
- Traceability per PECO Part Code Number 7, Description of Work Installed uparaded valve components in Main Steam isolation Valve.
- 8. Tests conducted: Hydrostatic 0 Pneumatic C NominalOperating Pressure a Crcher,,, Pressure 1050 os! Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. C0178102 ' Sheet 2 of 2 FORM NIS-2 (SACK) i 9. Remarks Manufacturers data recorts are traceable by PECO Work Order naciaae. Appiscable ManufactuWs Data Reports to be attached Work completed in accordance with PECO Enaineenna Chance Reauest# 97-01987. CERTIFICATE OF CORAPt. LANCE We certify that the statements made in the report are corred and this rapiscoment conforms to the rules of the ASME Code, Sedion XI. repair or replacement Type Code SymbolStamp NA Certificate of Ahkea,6 No. NA Expoabon Date - NA Signed b k (gwneror Owners Desgnee, Title J H. K""ER. Enaineer Dele July 14. .1998 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessel Inspedors and the State of Province of ' Pennsvivania and employed by H S.B.I & l. Comoany of Hartford. CT _ _ have the components described , in the Owners Report during the period 4M /F#3 to Y2/9A . and stale that
' to the best of rny knowledge and belief, the Owner has pierforfnod examinahons and teEen c6trectwo measures described in this Owner's Report in accordance with the requirements of the ASME Code, Sedian XI.
By signing this certdicate neither the inspedor nor his employer makes any warranty, expressed or implied, concorrung the examinations and correctrve measures descrbed in this Owners Report. Furthermore, neither the inspector nor his employer
' shal be liable in any manner for any personal injury or property damage or a loss of any kind arising horn or conneded with this inspechon.
Commessons PA-2497 I.N & A inspectors Signature / Nabonal Board, State, Prcunce, and Endorsements Date - ]Zl 1g Sb r (12/82) l
i l l 1 I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedon XI
- 1. Owner PECO Enerav Comoany Date June 30.1998 Name 2301 Market Street. Phi!adelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Name P O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0178103 :
Address Repair Organizabon P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code SymbolStamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A Address i 4. Identification of System Nuclear Boiler (System 041) Line No. APE-1MS HV441-1F028C
- 5. (a) Applicable Construction Code ASME III 19 68 Edition,3/in/71 Addenda. N/A Code Case (b) Applicable Edition of Section XI(Jbhzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufadurer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identsficaton Replamment Stamped (Yes or No)
POPPET ATWOOD & HEAT # F6976 N/A
- 114-97625 N/A REPLACEMENT YES MORRILL S/N 1 l
PILOT ATWOOD & HEATS H8915 N/A
- 114-97625 N/A REPLACEMENT YES l POPPET MORRILL S/N 1 ATWOOD & HEAT # Y3052 l COVER MORRILL S/N 1 N/A
- 114-97625 N/A REPLACEMENT YES
- Traceability per PECO Part Code Number
- 7. Description of Work Installed uporaded valve components in Main Steam isotation Valve.
- 8. Tests conducted: Hydrostatic D Pneumatic D NommalOperating Pressure a Other_ Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
l W/O No. C0178103 Sheet 2 of 2 FORM NIS-2 GACK)
- 9. Remarks Manufacturers data reports are traceable by PECO Work Order oscksoe.
Appicable Manufacturers Data Reports to be attached Work completed in accordrx:e with PECO E-4,wi ,e Chanoe Reouest# 97-01988. CERTIFICATE OF COMPUANCE We certify that the staternents made in the report am correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or reptamment Type Code Symbol Stamp NA Certfcate of Authonzation No. NA Expirabon Date NA Signed b N. -__ J.H. KRAMER. Enoineer Date Jutv 1. .1998 U Owner or Ownefs Designee, Tetle l CERTIFICATE OF INSERVICE INSPECTION i 1, the undersigned, holding a valid commesion issued by the Nabonal Board of Boiler and Pressure Vesse! Inspectors and the State or Province of Pennsvivania and employed by H.S B l & l. Company of Hartford. CT . . have' the components descnbod in ths Owners Report during the period 4/WFM to -f 2/ 97T . and state that to the best of rny knowledge and belief, the Owner has p(rforrded exammations and tainn cxifrective measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, wisin;,,g the i examinations and corredive measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commessons PA-24971.N & A inspe'ctors Signature / Natonal Board, State. Province, and Endorsements Date 7///19 78
/
I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI j
- 1. Owner PECO Eners Company Date June 30.1998 Narne 2301 Market Street. Philadelphia. PA 19101 Sheet , 1 of 2 Address l
- 2. Plant Limerick Generatino Station Unit 1 Name P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. 00178104 Address Repair Organization P.O. No., Job No. etc.
, 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A ) Narne Authorization No, N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Nuclear Boiler (System 041) Line No. APE-1MS HV-0411F028D
- 5. (a) Applicable Construction Code ASME lif 19 68 Edition,3/10/71 Addenda, N/A Code Case (b) Applicable Edition of Sechon XI Utihzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Nabonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. lee.Tsue i Replacement Stamped (Yes or No)
POPPET ATWOOD & HEAT # Y3052 N/A
- 114-97625 N/A REPLACEMENT YES MORRILL S/N 9806K PILOT ATWOOD & HEAT # H8915 N/A
- 114-97625 N/A REPLACEMENT YES POPPET MORRILL S/N 7 ATWOOD & HEAT # Y3052 COVER MORRILL S/N 9805K N/A
- 114-97625 N/A REPLACEMENT YES
- Traceability per PECO Part Code Number
- 7. Description of Work,8nstalled uporaded vane comoonents in Main Steam isolation Valve.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other _ Pressure 1050 osi Test Temp. 165 *F.
I l NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. C0178104 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufacturers data reports are traceable by PECO Work Order oscksoe.
Applicable Manufadurers Data Reports to be attached Work completed in accordance with PECO Enoineerino Chance Reouest# 97-01989. CERTIFICATE OF COMPL1ANCE We certify that the statements rnade in the report are corred and this roolacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b- h. m J.H. KRAMER. Enoineer Date Ju91. .1998 v Owner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State orProvince of Pennsvivania and employed by H.S B1 & l. Company of Hartford. CT _
, have' the components described in this Owners Report dunng the period N/R/9A to 7'2/ 9f$ . and state that to the best of my knowledge and belief, the Owner has perf(rmesf examinations and tal6sn c6rrectrve rneasures described in this f Owners Report in accordance with the requirements of the ASME Code, Section XI.
{ By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concoming the j examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. f ' Commissons PA-2497 f.N & A inspectors Signature / Natonal Board, State, Province, and Endorsements Date 7[2O 19 fd l
/
l l I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany D*te JUNE 02.1998 Name .
2301 Market Street Philadelphia PA 19101 Sheet i of 2 Address
- 2. Plant Limerick Generatina Sta$on Unit ONE Name _,.
P.O. Box 2300. Sanatoaa PA 19464-2300 Work Order No R0690404-01 Address Repair Organization P.O. No , Job No. etc.
- 3. Work Performed by PECO Energy Comoanv Type Code Symbol Stamp N/A I
Name Authorization No. N/A P O Box 2300. Sanatoca. PA 10464.2300 Expiration Date N/A Address
- 4. Identification of System 041 Nuclear Boiler LintNo DBA-110-E1 l
5.(a) Applicable Construction Code ASME 111 19 74 Edition, W74 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 60
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or l
No) ODE g g N'A *114-S2942 N/A Replacement NO 7/8" - 9 HEAT CODE N/A
*11&92048 (2) NUTS N/A Replacement NO 7/8" -9 NU31Z565 E88 l
- 7. Description of Work Rectaced (1) 7/8" X 5 W lona all thread stud and f2) 7/8"- 9 nuts on the 2* flance for the RX head instrument line
- 8. Tests conducted-. Hydrostatic 0 Pneumatic 0 NominalOperating Pressure [x) l Other 0 Pressure 1050 osi. Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017
I l [ W/O No. C0000000 Sheet 2 of X l. k FORM NIS-2 (BACK)
- 9. Remarks
- Denotes PECO Stock Code Number CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code. Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorizati NA. Expiration Date NA Signed M 1h10st . /dl Date C~ T/64/ 2 7
19 [ Owner 6 s Desenee! Title / [ V CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvania and employed by H S.B i & 1 Comoany of Hartford _ CT havp insp9cted the components described in this Owner's Report during the period 4 /14 / 9 8 to 7/29/98 and state that to the best of my knowledge and belief, the Owner has perf6rmed examinations and tal(en corfective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. Commissions PA-2497 f N & A
'nspector's i Sig' nature / National Board, State, Province, and Endorsements Date 291998 (12/82)
I i
)
i l I _ __ _ _ _ _ _ _ - _ ____ ____ _-___ a
t i l l f FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date July S.1998 Name 2301 Market S_treet Philadebbia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit i Name P.O. Box 2300. Sanatoca PA 19464-2300 Work Order No. C0172953 Address Repair Organization P.O. No., Job Np. etc.
- 3. Work Performed by PECO Enerov Comoany Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Reactoi Water Clean-up (System 044) Line No. DCB-102 HV-044-1F040
- 5. (a) Appricable Construction Code ASME lit 19 71 Edition, Summer 1973 Addenda, N/A Code Case (b) Applicable Edition of Seebon XI Utilized for Repairs or Replacements 19 86
- 6. Identdication of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
% " NPT NOVA HEAT # N/A *114-94787 N/A REPLACEMENT NO PLPE PLUG MACHINE 713827
- Traceability per PECO Part Code Number.
- 7. Description of Work Replaced commercial steel Dackino leakoff 01u0 with ASME matenal and sealwelded
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other ,, Pressure 1080 osi Test Temp. N/A 'F.
NOTE Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. w ________ _ _ _ _ _ _ _ _ _ _ _ _ .__
1 W/O No. C0172953 Sheel2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None Applicable Manufadurers Data Reports to be attached CERTIFICATE OF COMPWANCE We certify that the staternents made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement t
Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed 1 N. d - J H. KRAMER . Enoineer Date Juhr. $ .19 98 QBwner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by tra Nabonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by_ H.S B.! & l. Comoany of Hartford. CT in thrs Owners Report dunng the period /7//OfM to havej/7/
'7/ Wiper =pu the components desenbod
. and state that to the best of my knowledge and belief, the Owner has perforrr6d examinabons and ta(en c6rredeve rnessures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.
By signing this certificate neither the inspector nor his employer rnakes any warranty, W:: d orimplied, carsT#9 the examinations and corredive measures desenbed in this Owners Repo4. Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection.
# Commissions PA-2497 f.N & A inspectors Signature / National Board, State. Provnce, and Endorsements Daie 7,// 719 FE5 -
(12/82) { i l i
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI 1 Owner PECO Enerav Company Date Juhr 9.1998 Narne 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Name P O. Box 2300. Sanatoca. PA 19464-2300 Work Order No C0174228 Address Repair Organizabon P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Experabon Date N/A Address
- 4. Identdication of System ReactorWater Clean-up (System 044) Line No. ECC-115 044-1009A
- 5. (a) Applicable Construction Code ASME Ill 1974 Edtion, Winter 1974 Addenda, t416-1 Code Case (b) Applicable Edition of Section XI utihzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Nabonal Other Year BuA Replaced, or Code Component Manufacturer Serial No. Board No. Identificabon Replacement Stamped (Yes or No) i 044-1009A BORG 97 EP0314 N/A *114-83125 1997 REPLACEMENT YES 2" VALVE WARNER SP-ECC. SANDVIK HEATS 115.f1 STEEL 462117 N/A
- 114-90026 N/A REPLACEMENT NO PIECE # 10
) :
- Traceability per PECO Part Code Number.
- 7. Description of Work Replaced 2"alobe valve and ediacent oice
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other_ Pressure 1200 osi Test Temp. N/A *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (1) each steet is numbered and the number of sheets is recorded at the top of this form.
i l W/O No. C0174228 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks, Valve manufactured to ASME III.1974 edition. Summer 1975 addenda.
Appleable Manufadurers Data Reports to be attached Manufacturers Data Report is traceable by PECO Work Order packane. i CERTIFICATE OF COMPUANCE We certify that the statements made in the report are corred and this sooiscoment conforms to the rules of the ASME Code, Section XI. reper or replacement Type Code SymbolGtamp NA Certifcate of Authorization No. NA Exprabon Date NA Signed b k b - J H. KRAMER . Enomeer Dale Juiv9 .19 98 LDwnerorOwners Desgnee Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commesion issued by the Nabonal Board of Boiler and Pressure Vessel Inspedors and the State or Provina of Pennsylvania and employed by H S B I & I Comoany of Hartford. CT have' the AW.,7. described in this Owners Report dunng the period E//o/97 to 71A 98 . and state that to the best of my knowledge and belief, the Owner has W exammatens and taldn con 6ctwo measures described in this Ow e/s Report in accordance with the requirements of the ASME Code, Se&on XI. By signing this urbfcate neither the inspector nor his employer makes any warranty, expeJeod or imphed, conoeming the examinations and corre@ve measures described in this Owners Report. Furthermore, neither the irsspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspecbort
#4r Commasions PA-2497 f.N & A
' inspectors Sqniture
[ intenal Board, State, Province, and Endorsements Date f.A 19 98 i (12/82) i t
FORM N!S-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Secton XI
- 1. Owner PECO Eneroy Cornoany Date July 9.1998 Narne 2301 Market Street. Philadelphia, PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatino Staton Unit 1 Narne P O Box 2300. Sana'oca PA 19464-2300 __ Work Order No C0177479 Address Repar Organtzaten P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Bor 2300 Senatoca PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Reactor Water Clean-up (System 044) Line No DCC-102 044-1034
- 5. (a) Apphcable Constructed Code ASME fil 19 74 Edition,Wint r 1974 Addenda, N416-1 Code Case (b) Applicable E'J ition of Section XI Utikzed for Repairs or Replacemen319 86
- 6. Identification of Cornponents Repaired or Repla d and Replacernent Components Repaired, ASME Name of Narne of - Manufacturer National Other Year Buitt Reptamd, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 044-1034 BORG 97 ZV1169 N/A *114-83125 1997 REPLACEMENT YES 2" VALVE WARNER
- Traceabihty per PECO Part Code Number.
- 7. Description of Work Reolaced 2"alobe vatve
- 8. Tests conducted: Hydrostatic 0 Pneumatc 0 NominalOperating Pressure a Other. Pressure 1200 Dsl Test Temp. N/A *F.
NOTE: Supplemental sheets m form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the rarnber of sheets is recorded at the top of this form.
l W/O No. C0177479 Sheet 2 of 7 j l l FORM NIS-2 (BACK)
- 9. Remarks Valve manufactured to ASME Ifl.1974 edition. Summer 1975 addenda Apprcta Manufacturers Data Reports to be attached Manufacturers Data Report is traceable by PECO Work Order oscksoe.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiraton Date NA Signed b . J H. KRAMER . Enaineer Date July 9 .19 98 (Wuner Tr Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commisson issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S.B.I & l. Company of Hartford. CT have the components desenbod in this Owners Report during the penod A/B/#7 to 71A 9B . and state that to the best of my knowledge and belief, the Owner has p6tforr6ed examinations and taden co/rective measures described in thit Owners Report in accordance with the requirements of the ASME Code, Sechon Xi. By signing this certificate neither the inspedor nor his er@yer makes any warranty, expressed or implied, concoming the examinations and corrective rneasures desuibed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commessons PA-2497 f.N & A
" inspectors' Signature / National Board, State, Provina, and Endorsements Date 7 819 f8
/
(12/82) l I
l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Company Date July 9.1998 Narne 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit i Name P.O Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0178696 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System ReactorWater Clean-up (System 044) Line No. DBB-105 HV-044-1F039
- 5. (a) Applicable Construction Code ASME fil 19 71 Edibon. Winter 1972 Addenda, 1516-2.1567.1622,1682 Code Case (b) Applicable Edition of Section XI Utilced for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identdication Replacement Stamped (Yes or No)
HV-044-1F039 BORG E073A-1 1 N/A
- 114-98630 1937 REPLACEMENT YES 4' VALVE WARNER Traceability per PECO Part Code Number.
- 7. Description of Work Replaced 4* flanced check valve.
- 8. Tests conducted; Hydrostatic 0 Pneumatic 0 NominalOperating Pressure s Other Pressure 1080 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in fom1 of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
W/O No. C0178696 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Report is traceable by PECO Work Order oacksoe.
Applicable Manufacturers Data Reports to be attached 1 I CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No.___ NA Exp'ration Date NA Signed b = - . - J H. KRAMER , Enoineer Date July 9 .19 98 4 wner or Owner's Designee, Tale CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commesion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B I & l. Company of l Hartford. CT ected the w6w se desenbod I in this Owners Report during the period 3/uff4 to have)nsp/96 7/2J . and state that l to the best of my knowledge and beref, the Owner has p'erfofmed exarrunabons and ta(en cofrective measures described in this ) Owners Report in accordance with the requirements of the ASME Code, Sechon XL / By signing this certificate neither the inspector nor his employer makes any warranty, expressed or knplied, concoming the examinations and corrective measures desenbod in this Owner's Report Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property darnage or a loss of any kind arising from or connected with this inspection.
/ Commasons PA-24971.N & A
' Inspectors S$ nature / Nabonal Board, State, Province, and Endorsements Date 7/2/ 1998 (12/82)
{
1 FORM NIS-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI l l
- 1. Owner PECO Enerav Company Date July 10.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address 1
- 2. Plant Limerick Generabna Station Unit i Name P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No C0180547 Address Repair Organcation P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authormation No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. IdentrTr.ation of System ReactorWater Clean-vo (System 044) Line No ECC-103 PSV-044-108
- 5. (a) 4plicable Construction Code ASME 111 19 74 Edition, Winter '74 Addenda. N-416-1 Code Case
'.b) Apphcable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Compone*s Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Seria No. Board No. Identification Replacement Stamped j (Yes or :
No) i l ECC-103-1 HEAT # PIECE # 1 COLONIAL B7984H N/A
- 114-92059 N/A REPLACEMENT NO COUPLli4G MACHINE HEAT CODE s
.CJG' !
ECC-103-1 COMBUSTION PIECE # 2 ENGINEER- HEAT # N/A
- 114-90025 N/A REPLACEMENT NO l 1-1/2* PIPE ING L31377 ECC-103-1 NEWMAN PIECE # 3 FLANGE & HEAT # K-502 N/A
- 114-00764 N/A REPLACEMENT NO FLANGE FITTING CO. 1
( 4 ) 1" NOVA HEAT # N/A
- 114-92584 N/A REPLACEMENT NO I STUDS MACHINE 8090323 l NOVA !
(8)1* NUTS HEAT # N/A
- 114-92049 N/A REPLACEMENT NO MACHINE 8098856 i j l
- Traceability per PECO Part Code Number !
7, Description of Work installed new 1-1/2" pipina and relocated rehef valve
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure a Other. Pressure 1200 osi Test Temp. 182 'F.
i I NOTE: Supplemental sheets in form of lists s ketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa- i tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is nurnbered and the number of sheets is ; recorded at the top of this form. t ,
l l W/O No. C0180547 Sheet 2 of 2 i l FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerina Chance Reauests 97-02257.
Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b e
' J H. KRAMER. Enaineer Date Juhr10. s 1998 pr or Owners Designee, Title j i
l l CERTIFICATE OF INSERVICE INSPECTION 1, the undersigr>ed, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l.& l. Company of Hartford. CT have the components desenbod in this Owners Report dunng the period NMffA to 1 f.X 98 . and state that to the test of my knowledge and belief, the Owner has pefforr6ed exarrunations and tainn cor(seve measures descrbed in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate neither the inspector nor his employer makes any warfanty, expressed or implied, concoming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or cxmnoded with this inspection.
/ Commssions PA-2497 f.N & A inspectors Signature / Natonal Board, State, Provoce, and Endorsements Date 7 819 f8
/
(12/82) l l
l l FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date July 10.1998 Name 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P O Box 2300. Sanatoca. PA 19464-2300 Work Order No C0180548 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A l
P.O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Reactor Water Clean-up (System 044) Line No. DCC-102 PSV-044-109
- 3. (a) Applicable Construction Code ASME !!! 19 74 Edition. Winter '74 Addenda. N-416-1 Code Case (b) Applicable Edition of Section XI Utilced for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Compuent Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
DCC-102-1 HEAT # PIECE # 7 COLONIAL B7984H N/A
- 114-92059 N/A REPLACEMENT NO COUPLING MACHINE HEAT CODE
'CJG' DCC-102-1 COMBUSTION PIECE # 8 ENGINEER- HEAT # N/A
- 114-90025 N/A REPLACEMENT NO 11/2" PLPE ING L31377 DCC-102-1 NEWMAN P:ECE# 9 FLANGE & HEAT # K-502 N/A
- 114-00764 N/A REPLACEMENT NO FLANGE FITTING CO.
(4)1* NOVA HEAT # N/A
- 114-92584 N/A REPLACEMENT NO STUDS MACHINE 8090323
( 8 ) 1* NUTS NOVA HEAT # N/A
- 114-92049 N/A REPLACEMENT NO MACHINE 8098856
- Traceability per PECO Part Code Number
- 7. Description of Work insta!!ed new 1-1/2" pipino and relocated reref valve
. 8. Tests conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure a Other_ Pressure 1200 osi Test Temp. 182 *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. f
I W/O No. C0180548 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerina Chance Reauest# 97#2257.
Applicable Manufacturers Data Reports to be attached l I i CERTIFICATE OF COMPLIANCE We certify that the statements rnade in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repw or replacement Type Code Symbol Stamp NA Certifcate of Authorization No. NA Expirabon Date NA Signed _b - , -- J H. KRAMER. Enoineer Date JuN 10. .1998 Q5tner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsykania and employed by H S B 1 & l. Comoany of Hartford. CT have the components described l in this Owners Report dunng the penod N/2 /9JE to 7 2E fB . and state that I to the best of my knowledge and belief, the Owner has pairforrfied exammahons and taWien corffrarve measures described in thes Owners Report in accordance with the requirements of the ASME Code, Sechon XI. Ey signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and conective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising frorn or connected with this inspection. I
/M Conmssions PA-24971.N & A inspectors Signature [~ Natonal Board, State, Province, and Endorsements l Date M 19 98
/
(12/82) I l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Seden XI
- 1. Owner PECO Enerov Comoany Date Aorit 15.1997 Name 2301 Market Street. Philad=%ia. PA 19101 Sheet i of 2 Address
- 2. Plant Limenck Generstmo Staten Unit 2 Name P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0175585 Address Repair Organuatson P.O. No., Job No. etc.
- 3. Work Performed by PECO Nuclear Type Code Symbol Stamp N/A Name Authornaten No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiraton Date N/A Address
- 4. Identification of System 045 Cleanuo Filter Domin Line No ECC-102 PSV-045-1-62B
- 5. (a) Applicable Construction Code ASME 111 19 74 Editen. W-74 Addenda. N-416-1 Code Case (b) Appiecable Editon of Secton XI Utihzed for Repers or Replacements 19 86
- 6. Identification of Components Repaired or Repiamd and Replacement Components f Repaired. ASME
! Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Senal No. Boa d No. Identification Replacement Stamped (Yes or No) PSV-045-1 Lonegran 133975-8-1 N/A *114-77943 1993 Replacement Yes 628 l 1 %" Pipe Combustion Heat No. N/A
- 114-90025 N/A Replacement No l ECC 102-E1 Engineenng L31377 1
PC M l
- 7. Desenphon of Work Reotaced pressure relef valve and adm&nt txoe
- 8. Tests conducted: Hydrostate '. Pneumate U NommalOperstmg Pressure a Other u Pressure 1250 osi Test Temp. 85 *F.
NOTE: Supplemental sheets m form of hsts, sketches, or drawmgs may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each simet is numbered and the number of sheets a recorded at the top of thrs form. (12/82) This Form (E00030) may be obtamed from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017
- Traceabile; per PECO part code number.
l
._ a - u. !
W/O No. C0175585 Sheet 2 of 2
~. ,
FORM NIS-2 (BACK)
- 9. Remarks Manufadurers Data Recott is traceable by Work Order Packana. Valve PSVo45-162B constr* to ANC lli Appicable Manufacturers Data Reports to be attached 1974 Edibon with Summer 1974 Addenda Pressure testino and NDE comoisted in ecsAs with ASME fil.1992 Frem CERTIFICATE OF COMPUANCE We certrfy that the statements made in the report are conect and this rectacament conforms to the rules of the ASME Code, Secten XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzaten No. NA Expiraton Date NA Signed 1 B,W .3,64. ttta McL . Enaineer Date APc n. It 19 9'I
%ner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION l, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesse! Inspectors and the State or Province of Pennsvhrania and employed by H S B 1 & l. Comoany of Hartford. CT have inspected the components descnbed in the Owners Report dunng the penod 3-/3-97 to N- 2V-97 _, and state that to the best of my knowledge and belef, the Owner has performed examinatens and taken corrective measures desenbed in this Owners Report in accordance with the requirernents of the ASME Code, Sedon XI.
By signing ths certificate neither the inspector nor ha employer makes any warranty, expressed or impled, conceming the examinatens and corrective measures described in this Owners Report. Furthermore, neither the inspedor nor his employer shall be hable in any manner for any personalinjury or property damage or a loss of any lund ansing fmm or connected with this inspecton.
- Commssions PA-2497 f.N & A
' Inspectors Sgnature / Natonal Board, State, Province, and Endorsements Date 2N APA 19 9l (12/82) f
1 FORM NIS-2 OWNER'S REPDRT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date Juhr 10.1998 ~
Name 2301 Market Street Philadelphia, PA 19101 Sheet 1 of 2 Address l
- 2. Plant Limerick Generatina Station Unit 1 Name P.O Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0178087 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Senatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System RWCU Filter Deminerafirer fSystem 045) Line No ECC-102 PSV-045-1-62B
- 5. (a) Applicable Construction Code ASME 111 19 74 Edition. Winter '74 Addenda. N-416-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements "9 86
)
- 6. Identification of Components Repaired or Replaced and Replacement Components q
1 Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code I Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) SP-ECC-102-E1 COMBUSTION HEAT # N/A
- 114-90025 N/A REPLACEMENT NO PIECE # 7 ENGINEER- L31377 1-1/2" PIPE ING SP-ECC-102-E1 WFI NUCLEAR HEAT CODE N/A
- 114-91525 N/A REPLACEMENT NO PIECE # 8 '465YNE' FLANGE SP-ECC-102-E1 WFl NUCLEAR HEAT CODE N/A
- 114-92834 N/A REPLACEMENT NO ;
PIECE # 9 '465YNE' I FLANGE ( 4 ) 3/4' ALLIED NUT & HEAT # N/A
- 114-92568 N/A REPLACEMENT NO STUDS BOLT 8078593
( 8 ) 3/4" CARDINAL HEAT # N/A
- 114-92649 N/A REPLACEMENT NO NUTS INDUSTRl'1 8860932
- Traceability per PECO Part Code Number 7, Description of Work Replaced 1-1/2" relief valve inlet pipino and added flances
- 8. Tests conducted. Hydrostatic 0 Pneumate O Nommal Operating Pressure m Other., Pressure 1180 osi Test Temp. N/A *F, NOTE: Supplernental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each shoot, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
1 j l W/O No. C0178087 j Sheet 2 of 2 j
)
l I i FORM NIS-2 (BACX)
- 9. Remarks Work completed in accordance with PECO Enoineerino Chanoe Reauest# 97-02469 Appicable Manufacturers Data Reports to be attached
)
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this roolemment conforms to the rules of the ASME Code, Section XI. repair or replamment Type Code Symbol Stamp NA Certifcate of Authorization No. NA Expiraton Date NA Signed 1 N. J H KRAMER. Enoineer Date Jutv10. .1998
@mer 6r Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessellnspectors and the State or Province of Pennsylvania and employed by H S B I & i Company of Hartford. CT - have the components described in this Owners Report dunng the period 9h2/97 to 7 2B PB . and state that to the best of my knowledge and belief, the Owner has p6ffom6d examinations and takdn correictue measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.
By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures described in this Owners Report. Furthem1 ore, neither the inspector nor his employer shall be liable in any manner for any personal injury or proposty damage or a loss of any kind arising from or connected with this inspection. 4 Commessons PA-24971.N & A inspectors Signature / Natenal Board, State, Province, and Endorsements Date 2.819 $$
/
(12/82) l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerov Comoanv Date JUNE 02_1998 Name .
2301 Market Street _ Philadelphia PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit ONE Name P O_ Box 2300. Sanatoaa_ PA 19464-2300 Work Order No R0691168-06 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoanv Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300 Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Drive Line No 10 S299-10 27
- 5. (a) Applicable Construction Code _ASME lit 19 68 Edition- W'69 Addenda.1361-1 Code Case l (b) Applicable Edition of Section XI Utihzed for Repairs or Replacements 19_.B1_._
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
" L ELECTR 6076 NA NA 1975 Replacement YES ROD R VE l
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted-. Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X]
Other [] Pressure 1050 psi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in tems 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N.Y.10017 1 I u
W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statem6nts made in the report are correct and this reg lac- re a conforms to the rules of the ASME Code. Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authe N( Expiration Date NA Signed Du '
ME,t AI Date d0 LM 7_ b 19 N bwner or Ow'ners gnee, Title \ CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessef Inspectors and the State or Province of Pennsvtvania and employed by H S B I & l. Comoany of Hartford. CT . _ haye insDected the components described in this Owners Report during the penod .J////f8 to 7/29/98 . and state that to the best of my knowledge and behef, the Owner hasfpe/ formed examinations and taien ctfrrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By sgning this certificate neither the inspector nor his employer makes any warranty, expressed or imphed, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. A Commissions PA-2497 I N & A in'spectors Signature / National Board, State, Province, and Endorsements Date 7/191g 98 i (12/B2)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Date JUNE 02 1998 1, Owner PECO Enerav Comoanv Name , Sheet 1 of 2 2301 Market Street. Phiuinhia PA 19101 Address j Unit ONF
- 2. Plant Urrenck Generatina Station l Name Work Order No R0691168-17 P O Box 2300. Sanatoaa. PA 19464-2300 Repair Organization P.O. No., Job No. etc.
Address Type Code Symbol Stamp N/A
- 3. Work Performed by PECO Enerav Comoanv N/A Authonzation No.
Name Expiration Date N/A ; P.O Box 2300. Sanatoaa. PA 19464-2300 l Address I Une No 10-S299 14-39 4, identificatbn of System 047 Control Rod Drive Addenda 13612 Code Case 19 71 Edition. S'73
- 5. (1) Applicable Construction Code 6SME Ill (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 M
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Year Built Replaced, or Code Manufacturer National Other Stamped Name of Name of Replacement Serial No. Board No. Identification Component Manufacturer (Yes or No)
Replacement YES
" N/A N/A 1979 CONTR L ELECTR BE l-7 Desenption of Work REPLACED (1) CONTROL ROD DRIVE
..8. Tests conducted: Hydrostatic 0 Pneumatic D Nominal Operating Pressure [X]
1050 ost Test Temp. 165 'F. Otner [] Pressure NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size B 1/2 in. x tion in items i through 6 on this report is included on each sheet, and (3) each sheet is numbered and the numbe recorded at the top of this form. This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 (12/82) I
I I l W/O No. C0000000 Sheet 2 of X l l J FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Sheet Attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this Res;&_ernent conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate o. flA Expiration Date NA Signed ~ /MY ENGot%Y Date dCL4 1 k. 19 Owner Owne ee, Thie I '
l J CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and errployed by H.S B 1 & l. Comoany of Hartford. CT . . have ipspec e components described in this Owners Report during the period 3////98 to "f/2 9 9 . and state that to the best of my knowledge and behef, the Owner has perforfned fexaminations and taker (corre6tive measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the hspector nor his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with that, inspection. Commissions PA-2497 f.N & A Inspectors Signature / National Board, State. Province, and Endorsements Date 919 Ib (12/82)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provtssons of the ASME Code Section XI 1, Owner PECO Enerav Comoany Date JUNE 02.1998 Name , 2301 Market Street. Philadefohia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Umenck Generatina Station Unit ONE Name P.O Box 2300. Sanatoaa. PA 19464 2300 Work Order No R0691168-01 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authorization No. N/A P O. Box 2300. Sanatoca PA 19464 2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Drw Line No 10-S299-14-51
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edition. S'73 Addenda.1361-2 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or ;
No)
" N/A N/A 1979 Replacement YES ELECTR 8997 ROD R E l
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE l
! 8. Tests conducted Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X] I Other [] Pressure 1050 osi. Test Temp 165 'F. ( NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa- l l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is l l recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l l l l l , i 1 I
l W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK) 1 9, Remarks Manufacturers Data Sheet Attached j 1 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Syrnbol Stamp NA Certificate of Autho NA I Expiration Date NA Sig # l WhM Date,,,5~ JLW 'E 19 Owner or Ovners rie, Title ~ ( v CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commrssion issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S B 1 & I Comoany of Hartford. CT - , havei t d the components described in this Owners Report during the penod 3//M78 to 7 f FS . and state that to the best of my knowledge and belief, the Owner has perfornfed examinations and takeVcorredtive measures described in this Owners Report in accordance with the requirements of the ASME Code. Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or imphed, concerning the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property darc a ge or a loss of any kind arising from or connected with this inspection. Commissions PA-2497 l N & A Inspectors Signature / National Board, State, Province, and Endorsemeru Date AY19 N 7 (12/82)
I l i FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI I f
- 1. Owner PECO Enerav Comoanv Date JUNE 02.1998 l Name .
2301 Market Street PM-' '- Aia PA 19101 Sheet 1 of 2 Address 3 Plant Limanck Generatina At=tian Unit ONE Name P O. Box 2300. San = tan =. PA19464-2300 Work Order No R0691168-16 Address Repair Organization P.O. No,, Job No. etc. l
- 3. Work Performed by PECO Enerov Comnanv Type Code Symbol Stamp N/A l Name Authonzation No. N/A P O Box 2300 San =tnam. PA 19464-2300 Expiration Date N!A Address
- 4. Identification of System 047 Cont ol Rod Drive Line No 10-S299-18-15
- 5. (a) Applicable Construction Code ASME lil 19 71 Edition. S'73 Addenda.1361-2 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacement 19 M i
j 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No, Identification Replacement Stamped (Yes or No) GENERAL i CONTROL N/A N/A 1987 Replacement YES ELECTRIC A8298 ROD DRIVE l l j 7. Descriphon of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted. Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X]
Other[] Pressure 1050 psi, Test Temp. 165 'F. 1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa- ! tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l l [ l _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . _ _ _ _ _ _ _ _ _ _ _ _ _ . _ . _
I W/O No. C0000000 Sheet 2 of X FORM NtS-2 (BACK)
- 9. Remarks Manufacturers Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Rer.decement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorizat o. n NA # Expiration Date NA Q #.- .
Signed [M Yfhb ENGlMb Date dL d 19 lhAer or Ovners gnee, Title 4 ( CERTIFICATE OF INSERVICE lhSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S B I & t. Comoany of Hartford CT . have pspeeped the components desenbed in this Owners Report dunng the penod . '3////95 to 7/Ef/F8 . and state that to the best of my knowledge and belsf the Owner has per'6rmld examinations and takeficorre(ctrve measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. A Commissions PA-24971.N & A inspectors Signature
/ National Board, State, Province, and Endorsements Date N 19 9 8 (12/82)
I l 1 l J
1 I i i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comnany Date JUNE 02.1998 Name .
I 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 j Address l l
- 2. Plant Umerick Generatina Station Unit ONE j Name '
P O Box 2300 Sanatoca. PA 19464-2300 Work Order No. R0691168-01 Address Repair Organization P.O. No., Job No. etc. I I
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Sanatoaa PA 19464-2300 Expiration Date N/A Address i
I
- 4. Identification of System 047 Control Rod Drive Line No.10-S299-22-07 l l
- 5. (a) Applicable Construction Code ASME lit 19 68 Edition. W'69 Addenda.1361-1 Code Case ,
(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 60 ) G. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME-Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code : i Component Manufacturer Senal No. Board No. Identificaten Replacement Stamped i t (Yes or , ! l No) CONTR L N/A N/A 1975 Replacement YES E ECT 6760 I
~
! 7, Desenption of Work REPLACED (1) CONTROL ROD DRIVE G. Tests conducted; Hydrostatic C Pneumatic C Nominal Operating Pressure [X] Other [] Pressure 1050 psi. Test Temp. 165 *F. NOTE: Supplemental sheets in form of hats, sketches, or drawings may be used, provided (1) size 81/2 in x 11 in., (2) Informa-l tion in items 1 through 6 on this report is included on each sheet, and (?) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/B2) This Form (E00030) may be obtained from the Order Dept,, ASME,345 E 47th St., New York, N.Y.10017 i L--___-________-__---____-------_---._- _-. _ _ . . - _ - .
l ) > i i i l l
- W/O No. C0000000 Sheet 2 of X l
FORM NIS-2 (BACK) l l
- 9. Remarks Manufacturers Data Sheet Attached I
l l l l' CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA l [ Certificateof Authorization M NA i Expiration Date NA
- Signed M / Date Ml4/ 19 W
/bwner or ner ignee, Title
/
r , f l CERTIFICATE OF INSERVICE INSPECTION l l l 1, the undersigned, holding 6 valid commission issued by the Natx>nal Board of Boiler and Pressure Vessel inspectors and the State i or Province of Pennsvivania and employed by H S B f a 1. Comoany of l Hartford. CT _ havgins the components described l ' in this Owners Report dunng the penod . 3////f8 to 7/2 9 and state that ! to the best of my knowledge and belief, the Owner has perf6rm4d examinations and takin corfective measures described in this Owners Report in accordance with the requirements of the ASME Code, Sect:On XI. By signing this certificate neithM the Inspector nor his employer makes any warranty, expressed or implied, conceming the
' examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
f Commissions PA44971.N & A I inspectors Signature / National Board, State, Province, and Endorsements Date 19 1998 f (12/82) -
l I l 1 i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Section XI I l ' l
- 1. Owner PECO Enerav Comoany Date JUNE 02.1998 l Name .
1 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 I Address I l 2. Plant timerick Generatina Station Unit ONE l Name ' P O. Box 2300. Sanatoaa PA 19464 2300 Work Order No. R0691168-07 j Address Repair Organization P.O. No., Job No. etc, '
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A l 1
( . P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A l Address
- 4. Identification of System 047 Control Rod Drive Line No 10-S299-22-23
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edition. S'73 Addenda.1361-2 Code Case l (b) Applicable Edition of Secton XI Utilized for Repairs or Replacements 19 66 1
- 0. Identification of Components Repaired or Replaced and Replacement Components l
Repaired, ASME N1me of Name of Manufacturer National Other Year Built Replaced, or Code ! ( Component Manufacturer SenaiNo. Board No. Identification Replacement Stamped (Yes or . l No) I
" L ELECTR A8243 N/A N/A 1987 Replacement YES ROD R E I
i l 7 Desenption of Work REPLACED (1) CONTROL ROD DRIVE l l 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X) Other [] Pressure 1050 osi. Test Temp. 165 *F. NOTE: Supplernental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in , (2) informa. txm in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept, ASME,345 E.47th St., New York, N.Y.10017 l l
i W/O No. C000000C Sheet 2 of X FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Sheet Attached CERTIFICATE OF COMPLIANCE
. We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificateof A
% 6A __
Expiration Date NA Sign u NNMN $bf dhd Date 3r~ s .a 74 r 19 er orowner gnee, Tith (' r V CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H S B t & 1 Comoany of j Hartford. CT . . havejn ed the components described in this Owners Report dunng the perbd .3/// /98 to 'f/f_9 FS . and state that
' to the best of my knowledge and belit f, the Owner has peridfme6 examinations and takefi correIctive measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conecming the examinations and corrective measures described in this Owners Report. Furthermore, nether the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.
# Commissions PA-2497 f.N & A Inspectors Signature / National Board, State, Province, and Endorsements Date 7 1998
/
(12/82) i l
FORM NtS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1,. Owner PECO Enerav Comoany Date JUNE 02.1998 Name , 2301 Market Street Philwialnhia PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatina Station Unit ONE Name P O Box 2300. Sanatoaa PA 19464-2300 Work Order No R0691168-08 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A l Name AL*.horization No. N/A L
P O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A _ Address j 4. Identification of System 047 Control Rod Drive Line No.10-S299-22-31
]
- 5. (a) Apphcable Construction Code ASME IH 19 68 Edition. W'69 Addenda.1361-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 06
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component l
Manufacturer SenalNo. Board No. Identification Replacement Stamped J (Yes or No) CON R N/A N/A 1974 Replacement YES E ECTR 6349 l 1 i 7, Desenption of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X]
Other [] Pressure 1050 psi. Test Teinp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa. tion in items 1 through 6 on this report is included on each sheet, and f3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017
I l I W/O No. C0000000 Sheet 2 of X FORM NIS.2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Reolecernent conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authoriz longo. NA Expiration Date NA Sign ~40M }/0b U bbl M Date d d L4 19 Owner or i s' Designee, TAie l CERTIFIC ATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvfvania and employed by H S B.1 & l. Comoanv of Hartford. CT . . have irjsyetpd the components descnbed in this Owner's Report during the penod 3/// /9E to "//Z9/f8 . and state that to the best of my knowledge and behef, the Owner has perform /d examinations and takerfcorre(tive measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. Commissions PA-2497 l.N & A Inspectors Signature j/ National Board, State, Province, and Endorsements Date 7 9 19 M i (12/82)
FORM NIS-2 OWNER'S REPCf.T FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerov Comoany Date JUNE 02 1998 Name 2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limenck Gener3 tina Station Unit ONE Name P O Box 2300 Sanatoaa. PA 19464-2300 Work Order No R0691168-01 Address Repair Organization P.O. No., Job No. etc.
3 Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Roo Drive Line No 10-S299-26-07
- 5. (a) Applicable Construction Code ASME fit 19 74 Edition. W'75 Addenda. N207/1361-2 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 M
- 6. Identification of Components Repaired or Replaced and Replacemerd Components Repared, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamfed (Yes or ho)
CON R L N/A N/A 1988 Replacement YES E ECTR AW7
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted- Hydrostatic a Pneumatic c Nominal Operating Pressure [X]
Other [] Pressure 1050 osi. Test Temp. 165 "F. olOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York N.Y.10017
W/O No. C0000000 Sheet 2 of X FORM NIS.2 (BACK)
' 9. Remarks Macutgiprers Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Reotacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Author nf 4A Expiration Date NA Signed M P E7id b1M Date AOiM -
~2_b 19 N
)Ownero Owner signee, title )
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a vahd commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of pennsylvanm and employed by H S.B I & l Comoany of Hartford. CT - have)nspg:ted the components described in this Owners Report during the penod Thf /9E to 7/19/98 . and state that to the best of my knowledge and belief, the Owner has perfo/rned examinations and talufn conktive measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or imphed, conceming the examinatens and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arbng from or connected with this inspection. Commissions PA-2497 I N & A Inspectors Signature / National Board, State, Province, and Endorsements Date r 2919I8 (12/82) l ( l k
l l 1 I 1 j I l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany Date JUNE 02.1998 Name .
2301 Market Street. Philadelohta. PA 19101 Sheet 1 of 2 l Address i l
- 2. Plant timenck Generatino Station Unit ONE l Name l
P.O Box 2300. Sanatoaa. PA 19464 2300 Work Order No. R0691168-09 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Boy 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address 4 identification of System 047 Control Rod Drive Line No 10-S299-30-03
- 5. (a) Apphcable Construction Code ASME til 19 68 Edition. W'69 Addenda.1361-1 Code Case (b) Applicable Edition of Section XI Utihzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or No)
" L N/A N/A 1973 Replacement YES ELECTR 5080 ROD R E l
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted Hydrostatic c Pneumatic 0 NominalOperating Pressure [X)
Other [] Pressure 1050 ost Test Temp 165 'F. NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size B 1/2 In. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME. 345 E.47th St., New York, N.Y.10017 I
W/O No. C0000000 , Sheet 2 of X l l 4 l FORM NIS-2 (BACK) 9.- Remarks Manufacturer's Data Sheet Attached
'I i
l CERTIFICATE OF COMPLIANCE
]
We certify that the statements made in the report are correct and this Re0leces neat conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certific o g N,A Expiration Date NA Sig AAMM MGilPJFEN_._ Date dtItu "
.19
~Oviner or Odir esignee, Title' \
CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S 8.1 f, l. Comoanv of Hartford. CT - . havej'nspegted the components described in this Owners Report dunng the penod 3 // M 9F5 to 7/fS/98 . and state that to the best of my knowledge and belief, the Owner has perfo/med examinations and take6 correfetive measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer anall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions PA-2497 f.N & A Inspectors Signature / National Board, State, Province, and Endorsements Date 7' 19IO l
\
(12/82) I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany Date JUNE 02.1998 Narne .
I 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 [ Address . I 2. Plant Urnerick Generatina Station Unit ONE j Name ! l P O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0180035 07 Address Repair Organization P.O. No., Job No. etc. I
- 3. Work Performed by PECO Enerav Comoanv Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoaa. PA 19464 2300 Expiration Date N/A Address
- 4. ' identification of System 047 Control Rod Dnve Line No 10-S299-30-31
- 5. (a) Applicable Construction Code ASME Hf 19 74 Editen. W 75 Addenda. N207/1361-2 Code Case (b) Applicable Edition of Section XI Utihzed for Repners or Replacements 19 86 j i
6.- Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
" A CONTROL N/A N/A 1992 Replacement YES E ECTR ROD DRIVE 7, Desenption of Work REPLACED (1) CONTROL ROD DRIVE
. 8. Tests conducted: Hydrostatic D Pneumatic C Nominal Operating Pressure [X)
Other [] Pressure 1050 osi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. , (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 i I. I 1' _ - _ - - _ _ _ - _ _ _ _ _ - - - _ _ - _ - _ _ _ - _ _ _ _ _ . - . _ .. .3
l l W/O No. C0000000 Sheet 2 of X FORM NIS 2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Redecen ,e, a conforms to the rules of the ASME Code, Section XI, repair or replacement Type Code Symbol Stamp NA Certificate of Authorization NA , Expiration Date NA Signed b Y /11.A4?L / CAIC rA GY2-- Date < Yt/L ll $ 19
[ Owner or Yesignee, Titih / ~ / CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S B I & l Comoany of Hartford. CT . . havg insppted the components described in this Owners Report dunng the period 4//4/9FS to 7/7Y/98 . and state that to the best of my knowled0e and belief, the Owner has pdforn(ed examinations and taidn cor(ective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the exarr,inations and corrective measures desenbed in this Owners Report. Furthermore, neither the Inspector nor his employer shall be iisble in any manner for any personal injury or propert/ damage or a loss of any kind ansing from or connected with this inspection Commissions PA-2497 f N & A inspectors Signature / National Board, State, Province, and Endorsements Date I19 9 8 l (12/82) i ! l l l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerov Comoany Date JUNE 02.1998 !
Name , 2301 Market Street. Philadelphia PA 19101 Sheet i of 2 < Address
- 3. Plant timenck Generstena Station Unit ONE Name P.O Box 2300. Sanatoaa PA 19464-2300 Work Order No R0691168-01 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Cnmoany Type Code Symbol Stamp N/A Name Authonzation No. N/A P O. Box 2300. Sanatoaa PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Dnve Line No.10-S299-30 39
- 5. (a) Applicable Construction Code ASME fil 19 71 Edition. S'73 Addenda.13612 Code Case (b) Applicable Edttion of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or . Code Component - Manufacturer SenalNo. Board No. Identificahon Replacement Stamped (Yes or No)
CONTROL GENSAL . N/A N/A 1979 Replacement YES LECTRIC 8118 ROD DRlVE
- 7. Caenption of Work ___ REPLACED f1) CONTROL RO) DRIVE
- 8. Tests conducted: Hydrostatic 0 Pneumatic C Nominal Operating Pressure [X]
Other [] - Pressure 1050 osi. Test Temp. 165 *F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in tems 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept, ASME, ?45 E 47th St , New York, N.Y.10017
W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached 7
CERTIFICATE OF COMPLIANCE We certify that the statements made h the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of A t No._ NA Expiration Date NA Signedl N? uus
~
MtW Date bd LM Y 1g Owner o DesigneeMitte L CERTIFICATE OF INSERVICE INSPECTION
- ~ 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H.S B.I & t Comoanv of Hartford. CT .. . hay insycted the components desenbed in this Owner's Report dunng the penod 3/H/98 to 7/M/9S . and state that to the best of my knowledge and belici, the Owner has perforrfied 6 examinations and tafen cdfrectwe measures desenbed in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or irnplied, concerning the examinations and correctwo measures desenbed in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. D Commissions PA-2497 I N & A inspector's' Signature / National Board, State, Province, and Endorsements Date M 19 [8
/ .
1 j (12/82) ! l l l l. I l L-____ . _ _ _ _ _ _ . _ . .
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany Date JUNE 02 1998 Name ,
2301 Market Street. Philadeloh!a PA 19101 Sheei 1 of 2 Address
- 2. Plant Limenck Generatina Station Unit ONE Name P O Box 2300. Sanatoaa PA 19464-2300 _ Work Order No R069116810 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoanv Type Code Symbol Stamp N/A Name Authonzation No. N!A P O Box 2300. Sanatoaa PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Red Drive Line No.10-S299-30-43
- 5. (a) Applicable Construction Code ASME lit 19 68 Edition. W'69 Addenda,1361-1 Code Case (b) Apphcable Editson of Section XI Utilized for Repairs or Replacements 19 00
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code :
Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or ! No) E EC 9 03 ROD R VE l l l l l 1 l~ l l
- 7. Desenption of Work 'nEPLACED (1) CONTROL ROD DRIVE l
8 Tests conducted. Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X) Other [ } Pressure 1050 osi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in. (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l l (12/82) This Form (E00030) may be obtained from the Order Dept , AS.AE,345 E.47th St., New York, N Y.10017 l
l l W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK)
- g. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are conect and this Ree:ecerr,e-a conforms to the rules of the ASME Code, Secten XI. repair or replacement Type Code Symbol Stamp NA Certificateof Authorization NA Expiration Date NA Signed Y 0 Ad .
Y Date r ~ OL/ L/ $Y 19 Y Ovirner o s" Designee, Tit (e CERTIFICATE OF INSERVICE INSPECTPON t, the undersigned, holding a valid ccmmission issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of Pennsvivania and employed by H $ B.i & l. Comnany of Hartford CT . . have) ins e thecomponentsdesenbed in this Owners Report dunng the penod .W# /9R to 7/2 9 . and state that to the best of my knowledge and belief, the Owner has performed examinations and tak(n corlective measures described in this Owners Report in accordance with the requirements of the ASME Code, Secton XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or imphed, concerning the examinations and corrective measures desenbed in this Ownert Report. Furthermore, neither the inspector nor his employer shall be hable in any rnanner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.
/ Commissions PA-2497 l_N & A inipector's Signature / National Board, State, Province, and Endorsements Date 7 2 9 19 f d I
(12'82) l l l l _. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . _ _ _ _ _ - . _ _ _ _ _ - -
i i l l' FORM NIS-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisens of the ASME Code Section XI i
- 1. Owner PECO Enerav Comoany Date JUNE 02.1998 Name -
2301 Market Street. PhilWnhia. PA 19101 Sheet i of 2 Address
- 2. Plant timerick Generatina Staten Unit ONE Name P O_ Box 2300. Sanatoaa. PA 19464-2300 Work Order No R0691168-11 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by AECO Enerav Comoany Type Code Symbol Stamp N/A Name Au'.horization No. N/A P.O. Box 2300_ Sanatoaa PA 19464 2300 Expiration Date N/A Address i 4. Identifcaten of System 047 Control Rod Drive Line No_10-S299-30-59
- 5. (a) Applicable.0onstructen Code ASME W 19 68 Edition. W'69 Addenda.1361-1 Code Case .
(b) Applicable Edition of Secton XI Utilized for Repairs or Replacements 19 M
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natenal Other Year Built Replaced, or Code Component Manufacturer SenalNo, Board No, Identifcaten Replacement Stamped (Yes or No)
CON R L N/A N/A 1975 Replacement YES ELE TR 6606 1
- 7. Desenpten of Work REPLACED f1) CONTROL ROD DRIVE 1
' 8. Tests conducted: Hydrostatic 0 Pneumate O Nominal Operating Pressure [X)
Other [] Pressure 1050 osi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size B 1/2 in. x 11 in., (2) informa-tion in items 1 through 6 on thrs report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l
j W/O No. C0000000 Sheet 2 of X FORM NIS 2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI repair or replacement Type Code Symbol Stamp NA Certificate ati i b Expiration Date NA Signe 3 I 8h/b / MIN Date 0L -
19 k Owner os esignee, Title V i CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B.I.& l. Comoanv of Hartford CT . hav9inspyted the components desenbed in this Owners Report durrig the penod 3////YS to 7/2f/9S . and state that to the best of my knowledge and belief, the Owner has perforfned examinations and tal(en corfective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures desenbed in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. D ~ 7nspectors Signature /
' Commissions National Board, State. Province, and Endorsements PA-24971.N & A Date l $ ig $$
/
(12/82)
I t I l l' i 1 1 ' i' FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
)
l l i l
- 1. Owner PFCO Enerav Comoany Date JUNE 02 1998 l Name ,
2301 Market Street. Pr#- M 4e PA 19101 Sheet 1 of 2 l Address l 2. Plant timenck Generatina Station Unst ONE i Name P O Box 2300 Sanatoaa PA 19464-2300 Work Order No. R0691168-01 Address Repair Organization P.O. No., Job No. etc. l l 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A l P O. Box 2300. Sanatoon. PA 19464-2300 Expiration Date N/A Address l
- 4. Identification of System 047 Control Rod Drive Line No.10-S299-34-19
- 5. (a) Applicable Construction Code ASME I!! 19 68 Edition. W'69 Addenda.1361-1 Code Case 1 (b) Applicable Edition of Section XI Utihzed for Repairs or Replacements 19, 06 ]
l
- 6. Identification of Components Repaired or Replaced and Replacement Components j Repaired, ASME i Name of . Name of Manufacturer National Other Year Built Replaced, or Code j Component . Manufacturer Serial No. Board No identification Replacernent Stamped l (Yes or No)
" N/A N/A 1974 Replacement YES ELECTR 6022 ROD R E l
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE G. Tests conducted: Hydrostatic : Pneumatic 0 Nominal Operating Pressure [X]
Other [] Pressure 1050 osi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. i (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l l I l
'l 1
W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK) ~
- 9. Remarks Manufacturers Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the
' ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificat n)3o. NJ Expiration Date NA Sgn(
Dwner or O Ow esignee, Title
- EM%iM Date d 0 taJ l N 19 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S B.1 & l. Comoany _of Hartford CT .
havp inspyeted the components desenbed in this Owners Report dunng the penod . 3h//f8 to 7/2f/98 . and state that to the best of my knowledge and belief, the Owner has pe'rforrried examinations and tallen corlective measures desenbed in thrs Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. Commissions PA-24971.N & A inspectors Signature f_ Natonal Board. State, Province, and Endorsements Date AY19 Yb (12/82)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany _ Date JUNE 02.1998 Name ,
2301 Market Street Phi!adelohia PA 19101 Sheet i of 2 Address
- 2. Plant Umenck Generatina Station Unit ONE Name P.O Box 2300 Sanatoaa. PA 19464-2300 Work Order No. C0180035-08 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N /A P.O Box 2300 Sanatoaa PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Drive Line No 10-S299-34-35 5 (a) Applicable Construction Code ASME 111 19 68 Edition. W69 Addenda.1361-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86 i
6 Identification o' > amponents Repaired or Replaced and Replacement Components Repaired, ASME Efame of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or No) CONTROL GENERAL M N/A N/A 1975 Replacement YES ELEC M C ROD DRIVE I l l 1 I
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted. Hydrostatic 0 Pneumatic C Nominal Operating Pressure [X)
Other [] Pressure 1050 osi Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in Rems 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017
! l l 1 I W/O No. C0000000 l Sheet 2 of X FORM NIS 2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Res;ece; neat conforms to the rules of the ASME Code, Secten XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonra _ ,N A Expiraten Date NA Signe [//h - N/ Date ukV _19 W Owne ers Des (nde,JTtie /
L/ CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H.S B i & I Comoany of Hartford _ CT in this Owners Report during the penod N//Y/9J8 to have,M/YNinspged 7/ the components desenbed _ and state that to the best of my knowledge and belief, the Owner has perfofme< examinations and taMn cor(ective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signeg this certificate neither the Inspector nor his employer makes any warranty, expressed or irnplied, concerning the examinations and corrective measures described in this Owne's Report. Furthermore, netther the Inspector nor his employer shall be liable in any rnanner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- Commissions PA-2497 f.N i A inspectors Signature / National Board, State Province, and Endorsements Date O 1998 (12/82)
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI I
- 1. Owner PECO Enerav Comoany ' Date JUNE 02.1998 Name ,
2301 Market Street. E'N:.d.;d-d. PA 19101 Sheet 1 of 2 Address
- 2. Plant Umerick Generatina Stahon Unit ONE Name I P O. Box 2300 Sanatoaa PA 19464-2300 Work Order No. C0180035-16 Address Repair Organization P.O. No., Job No. etc.
i-
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A ,
Name Authorization No. - N/A ! 1 I P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A l L- Address '
- 4. Identification of System 047 Control Rod Drive Une No.10-S299-38-31
- 5. (a) Appicable Construction Code ASME Ill 19 71 Edition. S'73 Addenda.1361-2 Code Case (b) Applicable Edition of Section XI Utihzed for Repairs or Replacements 19 36 l
- 6. Identification of Components Repaired or Replaced and Replacement Components l
Repaired, ASME l Name of ~ Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identircation Replacement Stamped (Yes or No) CONTROL N/A N/A 1979 Replacement YES E ECTR ROD DRIVE
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE
' 8. Tests conducted-. Hydrostatic 0 Pneumate 0 - Nominal Operating Pressure [X]
other[] Pressure 1050 osi. Test Temp. 165 'F. l ' NOTE: Supplemental sheets in form of Irsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa. toon in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) . This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 t
W/O No. C0000000 Sheet 2 of X FORM NIS.2 (BACK)
- 9. Remarks Manufacturers Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization N - NA e Expiration Date NA Signed 8/> N S/A Date ML Y 19 Owr esignee,'itle T "/ /
[ Owner CERTIFICATE OF INSERVICE INSPECTION f, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H S.B 1 & 1 Comoany of Hartford. CT . . have ipspec)ed the components desenbed in this Owners Report dunng the penod 4//V /9f3 to 7/.30/f8 and state that to the best of my knovAedge and behef, the Owner has pefform6d examinatio9s and takerfcorredtive measures described in this
' Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or impled, concerning the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
' Inspectors M Signature /
Commissions PA-2497 I_N & A National Board, State, Province, and Endorsements Date 8O19 Yb i (12/82) f
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS i l As Required by the Provisions of the ASME Code Section XI l l 1 l
- 1. Owner PECO Enerav Comoany Date JUNE 02.1998 Name ,
2301 Market Street. Phi laddehis. PA 19101 Sheet 1 of 2 Address
- 2. Plant timenck Generatina station Unit ONE Name P O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No R0691168-01 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A l 1
P O Box 2300. Sanatoaa_ PA 19464-2300 Expiration Date NrA I Address l 4 Identification of System 047 Control Rod Dnve L 5e No 10-S299-42-31
- 5. (a) Appheable Construction Code ASME Ill 19 68 Edition. W'69 Addenda,1361-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86 6 Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
CONTROL GENERAk N/A N/A 1975 Replacement YES ROD DRIVE ELEC h 708 I l l
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE l 8. Tests conducted. Hydrostatic 0 Pneumatic C Nominal Operating Pressure [X]
Other [] Pressure 1050 osi. Test Temp. 165 *F. l NOTE: Supplemental sheets in form of lists, sketches, or drawings rnay be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each 6heet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017 l l l l l l
l l l l W/O No. C0000000 Sheet 2 of X I J FORM NIS-2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Reci.ce,i,e-t conforms to the rules of the ASME Code, Section XI. repair or replacement
; Type Code Symbol Stamp NA Certificate of Authoriza MA Expiration Date NA Signed N 4Q l . MikY Date ELA 2 19 dwner or Op s esignee, Thie /
, v CERTIFIC ATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H S.B I & l. Comoany of Hartford. CT -
in this Owners Report dunng the period 3/N/f8 to have,T 7A O / f M$lnspepted the components desenbed
. and state that to the best of my knowledge and belief, the Owner has Mortfied examinations and tak(n corr 6ctive measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspector n(sr his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any perwnal injury or property damage or a loss of any kind arising from or connected with this inspection. 4 Commissions PA-2497 f.N & A Inspectors Signature [ National Board, State, Province, and Endorsements Date 19 9 8 (12/82) L l
,, e
.. .__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . - _ _ _ _ _ _ - - - _ . . - - - - - - - =
i FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany Date JUNE 02 1998 Name .
2301 Market Street PhW L h1 PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit ONE Name P O Box 2300. Sanatoaa PA 19464-2300 Work Order No R0691168-01 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300 Sanatoaa PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Dnve Line No 10-S299-46-19
- 5. (a) Applicable Construction Code ASME Ill 19 68 Edition. W'69 Addenda.J361-1 Code Case (b) Appt' cable Edition of Section XI Utilized for Repairs or Replacements 19 60
- 6. Identificahon of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code !
Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or i No) l
" N/A N 1975 Replacement YES ELECTR 6573 ROD R 7.,Desenption of Work REPLACED (1) CONTROL ROD DRIVE
- 8. Tests conducted: - Hydrostatic a Pneumatic 0 Nominal Operating Pressure [X]
Other [] Pressure 1050 osi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) ' This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l -.
1 l I 1 I W/O No. C0000000 Sheet 2 of X j FORM NIS-2 (BACK)
. g. Remarks ' Manufacturers Data Sheet Attached CERTIFICATE OF COMPLIANCE
' We certify that the etatements made in the report are correct and this R-uleceaed conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorta gn Ng, NA. Expiration Date NA
' Signed ,JM M bt O Date N d LM _,19 I$
I
} Owner orbhnogesignee,Tltle %
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H.S B l & l. Comoany of Hartford _ CT . havg ins l 9eted the components desenbed in this Owners Report dunng the penod 1/// /YS to 7/f9/98 _ and state that to the best of my knowledge and behef, the Owner has perfdrme6 examinations and taiufn corfective measures riescribed in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate nefther the inspector nor his employer makes any warranty, expressed or imphed, concerning the examinations and corrective measures described in this Owners Report. Furthermore, netther the inspector nor his employer shall be hable in any manner for any personal snjiry or property damage or a loss of any kind ansing from or connected with this inspection. PA-2497 l_N & A inspectors Signature / ~ Commissions Natonal Board, State, Province, and Endorsements Date 919 98
. (12/82) .
I l
FORM NIS 2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Company Date JUNE 02.1998 Name .
2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limenck Generatina Station Und ONE Name P.O Box 2300. Sanatoca PA 19464-2300 Work Order No R0691168-12 Address Repair Organcation P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authormation No. N/A P O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Onve Line No 10-Si99-46-47 5 (a) Applicable Construction Code ASME Ill 19 68 Edition. W'69 Addenda,1361-1 Code Case (b) Applicable Edition of Section XI Utilced for Repairs or Replacements 19 86
- 6. Identificatim of Components Repaired or Replaced and Replacement Cornponents Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or No)
CONTR " E ECTR 7W NsA N/A 197S Replacement YES
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE 8 Tests conducted Hydrostatic a Pneumatic 0 Nominal Operating Pressure [X]
Other [] Pressure 1050 osi. Test Temp. 165 *F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12'82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017
W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this R e01.ce. i ,e-t conforms to the rules of the ASME Code Section XI. repair or replacement Type Code Symbol Stamp NA Certi NA Expirabon Date NA Signed <MD Mh 4:NM Date d C L6 1 19 -
Owner orOwriei f' Nignee, Title \ 1 s CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H.S B l 8 I Comoany of Hartford CT . , havy insppcted the components described in this Owners Report dunng the period W///98 to 7/27/fB and state that to the best of my knowledge and belief, the Owner has perfdtrrw(d examinations and ta(en cofrective measures described in this Owners Report in accordance with the requirements of the ASME Code Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implMKI, concerning the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the Inspector nor his empkryer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
. / Commissions PA-2497 f.N & A Inspectors Signature / National Board, State, Province, and Endorsements Date U 19 f 8 ...
- (12/82) - 1 l
l l 1 l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI i
- 1. Owner PECO Enerav Comoany Date JUNE 02.1998 i Name ,
2301 Market Street Philadelohta_ PA 19101 Sheet 1 of 2 Address
- 2. Plant timenck Generatina Station Unit ONE Name l
P O. Box 2300. Sanatoaa. PA 19464.2300 Work Order No R0691168-13 l Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comcany Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address 4 Identification of System 047 Control Rod Drive Line No 10-S299-46-55 =
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edttion. S'73 Addenda.1361-2 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 M
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natronal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
E EC A932 ROD VE
- 7. Desenption of Work REPtACED (1) CONTROL ROD DRIVE
- 8. Tests conducted: Hydrostate O Pneumatic C Nominal Operating Pressure [X)
Other [] Pressure 1050 psi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in x 11 in., (2) informa-tion in items i through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME 345 E 47th St , New York, N.Y.10017 ( t.
I W/O No. C0000000 Sheet 2 of X ( l FORM NIS-2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of o 4o. ANA Expiration Date NA rl SigndM' N 6Nbin Date CW 7b 19 b f,er or Designee, fttle i CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a vahd commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvania and employed by H.S B l.& f. Comoany of Hartford CT . hav ins ted the components desenbed in this Owners Report dunng the period . '4////fA to 7 FA . and state that to the best of my knowledge and behef, the Owner has performe'd examinations and tai 4n corfective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or impled, concerrung the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any land ansing from or connected with this inspection. Commissions PA-2497 l N & A V I Inspector's Signature [ National Board, State, Province, and Endorsements Date
,7 2 8 19 9 A (12/82) 1 1
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I As Required by the Provisions of the ASME Code Section XI l
- 1. Owner PECO Enerav Comcany Date JUNE 02.1998 Name ,
2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limenck Generatino Station l Unit ONE ;
Name P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No R0691168-01 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enercy Comoany Type Code Symbol Stamp N/A Name Authonzation No. N 'A P O Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 047 Control Rod Drive Line No.10 S299-50-23
- 5. (a) Applicable Construction Code ASME Ill 19 68 Edition. W 69 Addenda.1361-1 Code Case (b) Apphcable Edition of Section XI Utiitzed for Repairs or Replacements 19 M
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
" A' CONTROL N/A N/A 1975 Replacement YES ROD DRIVE ELECMC 7106
- 7. Desenpton of Work REPLACED (1) CONTROL ROD DRIVE Q. Tests conducted: Hydrostatic C Pneumatic C Nominal Operating Pressure [X]
Other [] Pressure 1050 osi. Test Temp 165 *F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on thrs report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of thrs form. l l (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N Y.10017
i W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK) l 9 Remarks Manufacturer's Data Sheet Attached 1 1 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate )$o. NA Expiration Date NA Signed MI b6idd Date d OLu 74 19 OwrGr or C Designee, htle/ ~ \ CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvania and employed by H S B l & l. Comoany of Hartford CT . , havy ins the components described in this Owners Report dunng the period 4////98 to 7/2f . and state that to the best of my knoMedge and benef, the Owner has perfotined examinations and ts(en coffective measures described in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspechon. Commissions PA-24971 N & A Inspectors Sqnature /' Natonal Board, State, Province, and Endorsements Date i M 19 M (12/82) j i i l
l l l i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Prwisions of the ASME Code Section XI l
- 1. Owner PECO Enerov Comoany Date JUNE 02.1998 l Name .
2301 Market Street. Philadelchhr PA 19101 Sheet 1 of 2 Address l
- 2. Plant timenck Generatina Station Unit ONE l Name l P O Box 2300. Sanatoca PA 19464-2300 Work Order No. R0691168-14 Address Repair Organization P.O. No., Job No. etc. i l
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A I Name Authonzation No, N/A I
P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A j Address '
- 4. Identification of System 047 Control Rod Drive Line No 10 S299 50-27
- 5. (a) Applicable Construction Code ASME 111 19 68 Edition. W'69 Addenda.1361-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 M
- 6. Identification of Components Repaired or Replaced and Replacement Components j
Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) CO R N/A N/A 1975 Replacement YES ELECTR 7256 R E I
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE i
! 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nomina! Operating Pressure [X] Other [] Pressure 1050 osi. Test Temp. 165 'F. NOTE: Supplemental sheets in form of itsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in dems 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017 I i
W/O No. C0000000 j Sheet 2 of X FORM NIS-2 (BACK)
- 9. Remarks Manufacturers Data' Sheet Attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Jode Symbol Stamp NA Certificate of Authon2 shog No IIA Expiration Date NA Sig h N NNE Date dL 4 1 19 Owner oi G Eer esignee,Thie / \
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid cornmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvania and employed by H S B t & i Comoany of Hartford CT , hav ins ed the components described in this Owners Report dunng the pened 9////F8 to 7 f8 and state that to the best of my knowledge and belief, the Owner has perfortried (examinations and tal(en coffectrve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective rneasures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with thrs inspection. M Commissions PA-24971 N & A Inspectors Signature / National Board, State. Province, and Endorsements Date If19 98 (12/82)
i l l FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS i As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Comoany Date JUNE 02_1998 Name .
2301 Market Street _ Phii=daichia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limanck Generatha Stahon Unit ONE Name P O Box 2300_ Sanatoon PA 19464.2300 Work Order No R0691168-15 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany ' Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Sanatoaa PA 19464-2300 Expiration Date N/A Address
- 4. identification of System 047 Control Rod Drive Line No 10-S299-50-39
- 5. (a) Apphcable Construction Code ASME fil 19 68 Edition. W'69 Addenda,1361-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 M
- 6. Identification of Components Repaved or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped )
(Yes or No) CO RL E E TR W2 N/A N/A 1974 Replacement YES I l
- 7. Desenption of Work REPLACED (1) CONTROL ROD DRIVE j 8 Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure [X]
Other [ } Pressure 1050 psi. Test Temp. 165 *F. NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa- l tion in items 1 through 6 on thrs report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. j I
. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 '
j I i
l 1 1 l W/O No. C0000000 Sheet 2 of X FORM NIS-2 (BACK)
- 9. Remarks Manufacturer's Data Sheet Attached I
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate O c. , hA Expiration Date NA Sig M ' b I Date tu 2Y 19 k Owner or Desig' nee, Tihe l CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commtsson issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H S B I & l Comoany of Hartford _ CT _ . havejns ed the components desenbed in this Owners Report dunng the penod .3////98 to 7/1 . and state that to the best of my knowledge and behef, the Owner has perf6rm5d examinations and takq6 corr 6ctree measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector not his employer makes any warranty, expressed or implied, conceming the examinations and correctrve measures desenbed in thrs Owners Report. Furthermore, neither the inspector nor his employer shall be hable in any manner for an personalin'ury or property damage or a loss of any kind arising from or connected with this inspection.
/ / ommissions PA-2497 f N & A inspectors Sig76ture
[ National Board, State, Province, and Endorsements Date 91998 i
-(12/82) l l
I l l l FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI l 1. Owner PECO Enerav Company Date Jutv 10.1998 Name " l 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P.O. Box 2300. Sanatoaa, PA 19464-2300 Work Order No. R0617867 Address Repar Organizabon P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authornation No. N/A P O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address l
- 4. Identification of System Stand-by Liaux1 Lontrol (System 048) Line No. ECB-114 XV448-1F004A
- 5. (a) ApplicableConstructionCode ASMEIll 19 68 Edition, N/A Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Nabonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificabon Replacement Stamped (Yes or No)
INLET CONAX 4576 N/A
- 114-77023 1995 REPLACEMENT YES FITTING BUFFALO TRIGGER CONAX 4587 N/A
- 114-77023 1995 REPLACEMENT YES DODY BUFFALO l
- Traceability per PECO Part Code Number.
- 7. Description of Work Replaced explosive valve inlet fittina and triacer body.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperatog Pressure a Other_ Pressure 1210 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
\
l 1 i W/O No. R0617867 Sheet 2 of 2 l FORfA NtS-2 (BACK)
- 9. Remarks Manu racturers Data Reports are traceable by PECO Work Order osckace.
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certi'y that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expirabon Date NA Signed b N. - J.H KRAMER . Enaineer Date July 10 .19 98 [Swner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B 1.81. Company of Hartford. CT . . have the components descnbed in this Owners Report during the period .W/.3 /98 to 7 23 983 . and state that to the best of my knowledge and belief, the Ownef has' performed exami.ebons and tak'en coffechve measures described in this owner's Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate nr.ither the inspector nor his employer makes any warranty, expressed or impled, concoming the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. M Commasions PA-24971,N & A inspectors Signature [ Nabonal Board, State. Province, and Endorsements i Date Z 3 ig 9 6 !, (12/82)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI I 1. Owner PECO Eneroy Comoany Date July 10.1998 Name i 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address l 2. Plant timerick Generatoo Staten Unit i Name l P O. Box 2300. Sanatoon. PA 19464-2300 Work Order No C0179234 Address Repair Organization P.O. No., Job No. etc. t 3. Work Performed by PECO Eneroy Comoany Type Code SymbolStamp N/A Name Authorization No. N/A l P O Box 2300. Sanatooa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Reactor Core Isolation Coolina (System 049) Line No HBB-102 HV-049-1F031
- 5. (a) Applicable Construction Code ASME lil 19 71 Edition. Summer 1973 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilmed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Nane of Name of Manufadurer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped l
(Yes or No) I 1/2" PIPE WFl NUCLEAR HEAT CODE N/A
- 114-79168 N/A REPLACEMENT NO PLUG . '615XNB' i
l l
- Traceabihty per PECO stock code number.
Replaced commercial steel leakoff plug with ASME materlat
- 7. Description of Work Drined 1/4'rehef hole in aate valve wedae to crevent pressure lockino
, 8. Tests conducted: Hydrostatic D Pneumatic D NominalOperating Pressure e Other . Pressure 22 5 feet water _Dal Test Temp. N/A *F. NOTE: Supplernental sheets in form of lists, sketches, or drawings may be used, provided (1) see 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numoered and the nurr.ber of sheets is recorded at the top of this form.
l l W/O No. C0179234 i Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Rernarks Work comoleted in accordance with PECO Enoineerina Channe Reauestf 90-03081.
Apphcable Manufacturers Data Reports to be attached 1 CERTIFICATE OF COMPl. LANCE We certify that the statements made in the report are correct and this replacement mnforms to the rules of the ASME Code, Section XI. reper or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Exprabon Date NA __ Signed - J H KRAMER . Ur.Mr Date July 10 .19 98 gwner'or Owners Dessnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessel inspedors and the State or Province of Pennsylvania and employed by H.S.B.I.& l. Comneny of Hartford. CT have the components descnbod in this Owners Report during the penod 3////FA to 7 2J FS . and State that to the best of my knowledge and belief, the Owner hais pefformed exarrunahons and laten coffectrue measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, conoeming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspedor nor his employer j shall be liable in any manner for any personal ir$ury or property damage or a loss of any kind arising from or conneded with this inspection. Commissions PA-2497 f.N & A l inspectors Signature / Nahonal Board, State, Promnnce, and Endorsements Date - 7 1996 (12/82) l' i _ _ _ _ - _ _ _ _ _ _ _ - _ _ _ _ - -
l FORM N!S-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Section XI
- 1. Owner PECO Enerov Company Dale July 10.1998 Name 1
2301 Market Street. Philadalohia. PA 19101 Sheet 1 of 2 Address
- 3. Plant timerick Generateno Stat on Unit 1 Name P.O Box 2300. Sanatoos. PA 19464-2300 Work Order No. C0179864 Address Repaar Organizaten P.O. No., Job No, etc.
l
- 3. Work Perforrned by PECO Eneroy Company Type Code Symbol Stamp N/A l Name Authonzahon No. N/A l
P O Box 2300. Sanatoos. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Reactor Core Isolaten Coolina (System 049) Line No HBB-102 HV4491F029
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edtson. Summer 1973 Addenda N/A Code Case (b) Applicable Edition of Section XI Utdized for Repaws or Replacements 19 86
- 6. Identification of Components Repaired or Replamd and Replacement Components l Repaised, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identrficaten Replacement Stamped (Yes or No)
I l I I
- 7. Description of Work Drilled 1/4" relief hole in cate valve wedae to prevent pressure lockino
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other. Pressure 34 feet water osi Test Temp. N/A *F.
NOTE: Supplernental sheets in form of lists, sketches, or drawings may be used, protnded (1) size 81/2 in. x 11 in., (2) informa-l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is nurnbered and the number of sheets is , recorded at the top of this form. j l l I
W/O No. C0179864 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerina Chance Reauest* 96-02839.
Apphcable Manufacturers Data Reports to be attached J CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzation No. NA Experation Date NA Signed b . J H KRAMER . Enoineer Date July 10 .19 98
@r oTOwners Desgnee, Title s
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of Pennsvivania and employed by H S B.t & l. Company of Hartford, CT . havginspepted the components desenbod in this Ownero Report during the penod 4/2/98 to '7/23/f8 . and state that 1 to the best of my knowledge and belief, the Owner has perfo/med examenatens and talien cohectue rneasures desenbed in this Ownefs Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his empicyer makes any warranty, expressed or imphed, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal irjury or property damage or a loss of any kind arising from or connected with this inspection.
/ _ Commissions PA-2497 l.N & A
" inspectors Signature 7 Natonal Board, State, Province, and Endorsernents Date 23 1996 (12/82) l l
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS { As Required by the Provisions of the ASME Code Sechon XI {
- 1. Owner PECO Eneroy Company Date JulvS.1998 ;
Name j i 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Narne P O Box 2300. Sanatoca. PA 19464-2300 Work Order No C0180538 Address Repair Organuaton P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code SymbolStamp N/A Name Authonzaten No. N/A P,0 Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address j
- 4. Identification of Svstem Reactor Core Isolation Coolina (System 049) Line No. HBB-101 HV449-1F060
- 6. (a) Apphcable Construction Code ASME 111 19 71 ' Edition, Summer 1971 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utikzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
%
- NPT ENERGY HEAT CODE N/A *1144 0618 N/A REPLACEMENT NO PIPE PLUG STEEL 074F
- Traceability per PECO Part Code Number.
7 Description of Work Replaced commercial steel osckino leakoff olue with ASME materiet
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure n
( Other. Pressure 930 osi Test Temp. N/A 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. m
i W/O No. C0180538 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Rernarks None Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are corred and this replacement conforms to the rules of the ASME Ccde, Section XI. repair or replacement Type Code Symbol Stamp NA Certifcate of Authorization No. NA Expiration Date NA Signed C=- N . M_ - J H. KRAMER . Enoineer Date July. 5 .19 98 6 ener or Owners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B i & l. Company of Hartford. CT have' the components desenbod in this Owners Report during the period 4// /98 to ""//7 98 . and state that to the best of my knowledge and belief, the Owner has perfdmsd exarnenations and taldn m/rective measures desenbod in tnis Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or imphed, concoming the examinations and corrective rnessures desenbod in this Owner's Report Furthermore, neither the inspector nor his employer shall be liable in any or any personal injury or property damage or a loss of any kind arising from or connected with this inspedion.
/ T,ommesions PA-24g7 f.N & A inspectoffSignature / National Board, State, Province, and Endorsements Date 7 / 7 19 9 8 ,
/
(12/82) i 1 i
l I l 1 FORM NtS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI i
- 1. Owner PECO Enerav Company Date Julv5.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 Address l
- 2. Plant timerick Generahna Station Unit 1 1 Name l
P O Box 2300. Sanatoaa, PA 19464-2300 Work Order No. C0181382 Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatnaa, PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Reactor Core Isolation Coolina fSystem 049) Line No HBB-101 HV@9-1F080
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Summer 1971 Addenda. 1516.1567 and 1622 Code Case (b) Applicable Edition of Section XI Utileed for Repars or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replace 6 or Code Component Manufacturer Serial No. Board No. Identification Replacernent Stamped (Yes or No) j t
%
- NPT COLONIAL HEAT CODE N/A
- 114-94791 N/A REPLACEMENT NO l PIPE PLUG MACHINE 'AEM' -
l I
- Traceability per PECO Part Code Number. l' I
- 7. Description of Work Replaced commercial steel packina leakoff plua with ASME material ;
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other. Pressure 955 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa- l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
l I W/O No. C0181382 Sheet 2 of 2 l FORM NIS-2 (BACK)
- 9. Remarks None J Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the staternents made in the report are correct and this replacement confoms to the rules of the ASME Code, Secten XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed C k N . N._ s J H. KRAMER . Enaineer Date July. 5 .19 98 C wner'or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Natenal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H.S B I.& I. Company of Hartford. CT have' the components descnbod in this Owners Report dunng the penod N& /98 to ':f /7 9T .and state that to the best of my knowledge and belief, the Owner has pdfrformbd examinatens and take6 con 6ctne measures desenbod in this Owners Report in accordanm with the requirements of the ASME Code, Secten XI.
1 By signing this certificate neither the inspector nor his employer makes any warranty, expressed or imphed, concoming the j examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. l
> Commessaons PA-2497 f N & A Inspectors Signature / National Board, State Province, and Endorsements Date 7 7 ig fd
/
(12/82) l I i ___ ____.___________________________.._______________a
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI
- 1. Owner ,, PECO Eneroy Company Date July 6.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit i Name P.O Box 2300. Senatoon PA 19464-2300 Work Order No. C0156675 Address Reper Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Comeany Type Code Symbol Stamp N/A Name Authorizaten No. N/A P.O Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Une No GBB-119 051-1F031C 0, (a) Applicable Constructed Code ASME lil 19 71 Edition, Summer 1971 Addenda N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement COTw.a .
Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 1/4
- NPT CAPITOL HEAT CODE N/A
- 114-79171 N/A REPLACEMENT NO PIPE PLUG MFG.CO. 008E l
\ l l
- Traceabihty per PECO Part Code Number.
- 7. Descripton of Work Replaced commercial steel packino leskoff pluo with ASME material and seal welded
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NommalOperating Pressure a Other., Pressure 235 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. I
t l i W/O No. C0156675
- Sheet 2 of 2 FORM N!S-2 (BACK)
- 9. Remarks None.
Appicatde Manufacturers Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Ssetion XI. repar or replacement Type Code Symbol Stamp NA Certicate of Authorization No. NA Expiration Date NA Signed 1 5. - J H KRAMER . Enaineer Date July 6 .19 98 Svner or Owners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by H S B I & l. Comoany of Hartford. CT . have,ir r4M the components desenbed
- . in this Owners Report dunng the period /D & /'15 to 7/16/9A2 . and state that to the best of my knowledge and belief, the Owner has gierforined exammatons and taken cofrectrve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Seda XI.
By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or impled, concoming the examinations and corrective rneasures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
" ~
Commissions PA-2497 l.N & A l inspectors Sgnature / Natonal Board, State. Provrice, and Endorsements Date 7< )$ 19926 i l (12/82) i, t L .
FORM NtS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisens of the ASME Code Sechon XI
- 1. Owner PECO Enerov Company Date July 6.1998 Namo ,
2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 - Address
- 2. Plant . Limenck Generatino Station Unit 1 Name P O Box 2300. Sanatoca. PA 19464-2300 Work Order No C0166574 Address Repar Organizabon P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Comoany Type Code Symbol Starnp N/A Name AGk.6. No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expraton Date N/A Address
- 4. Identification of System Residual Heat RemovalISystem 051) Line No. GBB-109 HV-051-1F007A (a) Applicable Construction Code ASME lit 19 71 Editon. Winter 1972 Addenda,_ N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or r "wp,.ce,T.,d.19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASA,*.E Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identsficaton Replacement Stamped (Yes or No)
% " NPT WFl HEAT CODE N/A
- 114-79168 N/A REPLACEMENT NO PIPE PLUG NUCLEAR 228VNR
- Traceability per PECO Part Code Number.
?. Description of Work Reotaced commercial steel Dackino leakoff Dluo with ASME material and seal welded
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NommalOperating Pressure a Other., Pressure 230 osi Test Temp. N/A 'F.
l-l NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-I tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
l
~
l ! W/O NJ. C0166574 [ S%M2d2 FORM NIS-2 (BACK)
- g. Remarks None.
Applecable Manufadurers Data Reports to be attached CERTIFICATE OF COMPlJANCE We certify that the statements made in the report are Correct and this replacement conforms to the rules of the ASME Code, Section XI. reper or replacement Type Code Symbol Stamp NA Certificate of Authorization No. - NA Expirabon Date NA Signed I- M_ - J H. KRAMER . Enoineer Date July. 6 .19 98 C uner o'Omrefs Designee, Title i CERTIFICATE OF INSERVICE INSPECilON 1, the undersigned, holding a valid commasion issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B i & t Comnany of Hartford. CT . have the components descnbod in the Owners Report during the period . 9&/96. to 7/7 98 . and state that to the best of my knowledge and belief, the Owner has poMmedexaminatens and tal6n cmfrectrwe measures described in this Owners Report in accordance with the requwements of the ASME Code, Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the ; examinations and corrective measures described in this Owner's Report Furthermore, neither the inspedor nor his employer ! shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this f inspection. 1 [ ~ Commesens PA-24g71.N & A
' inspectors Signature
/ Nabonal Board, State. Province, and Endorsements Date 7//7
( 19 98 (12/82) I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI
- 1. Owner PECO Enerav Comoany Date July 7.1998 Narne 1
2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit i Name P O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0169382 Address Reper Organization P.O. No., Job No, etc. l
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Au b a.6.No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A .
Address l l
- 4. Identification of System Residual Heat Removal (System 051) Line No Dt.A-112 HV 051-1F017D
- 5. (a) Applicable Construction Code ASME Ill 19 74 Edition. Summer 1974 Addenda 15161.1567and 1682 Code Case (b) Applicable Edition of Section XI Utilized for Repaws or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufadurer Serial No. Board No. Identification Replacement Stamped (Yes or No)
- 7. Description of Work Drilled 1/8" hole in cate valve wedae to orevent oressure lockino
' 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other., Pressure 980 osi Test Temp. N/A *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
l l
WO No. C0169382 Sheet 2 of 2 i FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerino Chance Reauest# 96-012%
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed h. b - J H. KRAMER . Enaineer Date Julv 7 .19 98 l Swner 6r Owners Designee, Title j F CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspe@rs and the State or Province of Pennsylvania and employed by H S B l & !. Comoany of Hartford. CT _ _ the components desenbod in this Owners Report dunng the period e 7/2.Z/fL to havej'nspe 7/20/Y @8 . and state that to the best of my knowledge and belief, the Owner has perf6rmed4xamsnatens and taidm codective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certifcate neither the insp* . nor his employer makes any warranty, expressed or imphed, concoming the examinations and corrective rneasures descrfw ri this Owners Report. Furthermore, neither the inspector to his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection. l
- l t'
- Commasions PA-2497 l.N & A Inspect 6fs Sgnature / Natonal Board, State, Province, and Endorsements Date 7/2019 $I6 1 ,
l (12/S2) l
FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Secton XI
- 1. Owner PECO Eneroy Company Date Julv 9.1998 Name ,
l 2301 Ma*et Street. Philadelphia PA 19101 Sheet 1 of 2 Address ,
- 2. Plant timerick Generatina Station Und i Name l
P O. Box 2300. Sanatoas. PA 19464-2300 Work Order No. C0169532 Address Reper Organaatson P.O. No., Job No, etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authormation No. N/A P O Box 2300. Senatoaa. PA 19464-2300 Exprabon Date N/A Address
- 4. Idenbficahon of System Residual Heat Removal (System 051) Line No. GBB-119
- 6. (a) Applicable Construction Code ASME Ill 19 74 Edition. Winter '74 Addenda N4161 Code Case (b) Applicable Edition of Sechon XI Utilized for Repers or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Repisoement Components 1
Repawed, ASME l Name of Name of Manufacturer Nabonal Other Year Built Replaced, or Code ! Component Manufacturer Serial No. Board No. Identrhcahon Replamment Stamped (Yes or No) GBB-119-4E PIECE # 21 CAPITOL HEAT CODE N/A
- 114-92667 N/A REPLACEMENT NO COUPLING MFG.CO. '821' GBB-11NE PIEC# 20 QUANEX HEAT # N/A
- 114-90036 N/A REPLACEMENT NO 3/4" PlFE 236202 061 1189 3/4' VALVE YARWAY S/N A3019 N/A
- 114-10116 N/A REPLACEMENT YES
- Traceability per PECO Part Code Number
- 7. Description of Work installed 3/4' vane by-pass oicina
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperatmg Pressure a Other Pressure 230 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa. tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. -_____-__:________-________-_____-_____=-__________-____________._____-___ _ - __ . _ - _ _ - _ _ _ _ . _ . _ _ _ _ _ _ _ -- ____-_______-_-__--a
W/O No. C0169532 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerina Chance ReauesW 9601157.
Appbcable Manufacturers Data Reports to be attached Manufacturers Data Report is traceable by PECO Work Order osckaae. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or repiamment Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b h. - J H KRAMER. Enoineer Date July 9. .1998 V Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid comfrussion issued by the National Board of Boiler and Pressure Vesselinspedors and the State or Province of Pennsylvania and employed by H.S B.I & l. Company of Hartford. CT . have the components described in this Owners Report dunng the penod M/E 1/96 to ~715 8 . and state tnat to the best of my knowledge and belief, the Owner his pedormed exammabons and taken torre&ve measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certicate neither the Inspector nor his employer makes any warranty, expressed or irnphed, concoming the examinations and corrective measures desenbod in this owners Report Furthermore, neither the inspector nor his empicajer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection. Commasions PA-2497 f.N & A inspectors Signatuf Natonal Board, State, Provmoe, and Endorsements Date 15 1998 (12/B2)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sectu XI
- 1. Owner PECO Enerov Company Date July 7.1998 Name 2301 Ma+et Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant t.imenck Generateno Staten Unit 1 Name P O. Box 2300. Sanatoca. PA 19464-2300 Work Order No C0175990 Address Repair Organgaton P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O Box 2300. Sanatoca. PA 19464-2300 Expiraton Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Line No GBB-117 051-1F003B
- 5. (a) Apphcable Constructed Code ASME III 19 71 Editon, Summer 1971 Addenda, N/A Code Case (b) Apphcable Eddon of Section XI Utilced for Repars or Replacements 19 86
- 6. Identification of Components Repaired or Replamd and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced,or
- Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
%
- NPT BONNEY LOT NO. 9148 N/A
- 114-94791 N/A REPLACEMENT NO PIPE PLUG FORGE
- Traceability per PECO Part Code Number.
- 7. Desenption of Work Replaced commercial steel packino leakoff pluo with ASME material
- 8. Tests conducted. Hydrostatic D Pneumatic 0 NominalOperating Pressure a Other _ Pressure 365 osi Test Temp. N/A 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa ' tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. C0175990 Sheet 2 of 2 l l FORM NIS-2 (SACK)
- 9. Remarks None.
Appicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code SymbolStamp NA Certificate of Authorization No. NA Expiration Date NA Signed 1 h. b - J H. KRAMER . Enoineer Date Jutt S .19 98 (8wner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commssion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S.B.I.& l. Company of Hartford. CT . have the components descnbod in ths Owners Report during the period 3/11/9A5 to -f /_s . and state that to the best of my knowledge and balief, the Owner hd pefformed exarmnations and take6 corrfective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certifcate neither the inspedor nor his employer makes any warranty, expressed or imphed, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspedor nor his employer ! shall be liable in any manner for any personal injury or property damage or a foss of any kind arising from or connected with this inspection. s Commissons PA-2497 f N & A inspector's Sqnature / Natenal Board, State, Province, and Endorsements Date
/6 1998 (12/82) .
l I
i l
)
I l I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI
- 1. Owner PECO Enerav Company Date JuN 7.1998 Narne 2301 Market Street. Philadebbia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Staten Unit 1 Name 4 I
P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0178937 i' Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authorization No. N/A P O. Box 2300. Sanatoaa. PA 19464-2300 Expirvdon Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Line No. GBB-105 HV 051-1F016A
- 5. (a) Applicable Constructed Code ASME Ill 19 74 Edition, Summer 1974 Addenda, 1516-1.1567 and 1682 Code Case (b) Applicable Edition of Secten XI utdized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Compurients Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 1/4
- NPT CAPITOL HEAT CODE N/A
- 114-79171 N/A REPLACEMENT NO PIPE PLUG MFG.CO. 015K
- Traceability per PECO Part Code Number.
Drilled 1/8" hole in gate valve wedge to prevent pressure locking.
- 7. Description of Work Replaced commercial steel packino leakoff plua with ASME material.
- 8. Tests conducted: Hydrostate O Pneumatic 0 NommalOperating Pressure a Other _ Pressure 150 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) sizo 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is i recorded at the top of this form. l
W/O No. C0178937 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerina Chance Recuest# 9&C3082.
- Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are mrrect and this roolacement conforms to the rules of the ASME Code SectionXL repair or replacement Type Code Symbo Stamp NA l Certificate of Authorization No. NA Expration Date NA Signed 1 N.__-- __
J H. KRAMER , Enaineer Date July 7 ,19 98 ($wner'orOwnersDesignee Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commession issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S.B 1.8 l. Comoony of Hartford. CT . . have~ the w Mi,' sdesenbod in this Owners Report dunng the penod S/// /'/8 to 71799) . and state that to the best of my knowledge and belief, the Owner has forforfned exarrunations and take6 cor(ective measures descnbod in this Owners Report in accordance with the requirements of the ASME Code, Sechon XL By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspedor nor his employer shall be liable ir, any rna r for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
. /
- Cv,mn4 PA-2497 f.N & A
" ~
inspectors Signature National Board, State, Province, ard Endorsements Date 7//7 19 8 (12/82)
)
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedon XI I
- 1. Owner PECO Enerav Company Date July 7.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 3. Plant timarick Generatina Steien Und 1 Name P.O Box 2300. Sanatoaa. PA 19464 2300 Work Order No. C0178944 Address Repair Organizaten P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzabon No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Residua! Heat Removal (System 051) Line No. GBB-105 HV-051-1F016B
- 5. (a) Applicable Construction Code ASME lil 19 74 Editon, Summer 1974 Addenda, 1516-1,1567and 1682 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Repia ments 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificaten Replacement Stamped (Yes or No)
- 7. Desenption of Work Drilled 1/8" hole in cate vatve wedae to prevent pressure lockina
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure u Other _ Pressure 365 osi Test Temp. N/A 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. i
l W/O No. C0178944 Sheet 2 of 2 l I l FORM NIS-2 (BACK) i l
- 9. Remarks Work completed in accordance with PECO Enaineenna Chance Reauest# 96M084 1 Apphcable Manufacturers Data Reports to be attached l I
I I CERTIFICATE OF COMPLIANCE j We certdy that the statements made in the report are correct and this reclamrnent conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expraten Date NA Signed . J H. KRAMER . Enaineer Date July 7 .19 98 (Avner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S B 1.81. Comoany of Hartford. CT have the components descnbod in this Owners Report dunng the penod N/2 /9E to 7 2C 18 . and state that j to the best of my knowledge and beref, the Owner has performeid exarninatens and taidn wr(ectrve measures described in this ! Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the ! examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection. I l Commissions PA-2497 l,N & A I inspedfors Signature / National Board, State, Province, and Endorsements Date Y 2019 98 l (12/82) )
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Frovisions of the ASME Code Section XI {
- 1. Owner PECO Enerav Company Date April 27.1998 Name y 1
2301 Market Street. Philadelohta PA 19101 Sheet 1 of 2 l Address 1
- 2. Plant Limerick Generatina Station Unit i Name P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0179731 Address Repair Organizaten P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiraton Date N/A Address i
- 4. Identification of System 051 RHR LPCI Line No DLA-112 HV-051-1F017A 4 (a) Applicable Construction Code ASMEIll 19 74 Edition. S74 Addenda, 1567.1682.1516-1 Code Case (b) Applicable Editon of Secton XI Utilized for Repairs or Replacements 19 86
- 6. Identificaten of Components Repaired or Replaced and Replacement Components Repaired, ASME Code J Name of Name of Manufacturer National Other Year Built Replaced, or Stamped i Component Manufacturer Senal No Board No. Identification Replacement (Yes or No)
Stem BW/IP S/N: 7382 Ht No. 48381 N/A N/A 1998 Replacement Yes I Ht No. E3650 Guides (2) N/A N/A 1998 Replacement No l 7. Desenpton of Work Installed RHR LPCI valve performance enhanaments per MOD P00658-1
- 8. Tests conducted: Hydrostatic ; Pneumatic ; Nominal Operating Pressure :
Other a Pressure 1050 osi Test Temp. 165 *F. NOTE: Supplemental sheets in form of lists, sketches, or drawings rnay be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is inc'uded on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017
{ W/O No. C0179731 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Installed dec aude modeca5on kit into valve body in order to tehten clearances between dec Qudes and disc Applicable Manufacturers Data Reports to be attached Installed new dsc. dse cuides and smart stem per ECR LG 9742073 CERTIFICATE OF COMPLIANCE We mmfy that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No, NA Expiration Date NA Signed . . 1 . Enaineer Date C4 ~27 ,19 9 8 Owner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commesion issued by the National Board of Boiler and Pressure Vessellnspectors and the State or Province of Pennsylvania and employed by H S B I & I Company of Hartford CT . . havejnsgected the components desenbed in this Owners Report dunng the penod N&/fB to JE/J/98 . and state that to the best of my knowledge and belief, the Owner has p6rforfned examinations and tak6n aforrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.
By signing this certificate norther the Inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for a personalinjury or property damage or a loss of any kind arising from or connected with ths inspection. A Commissions PA-24971 N & A Inspectors Sgnature / National Board, State, Province, and Endorsements Date 319 kb l vm I i l l I 1
l l l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisons of the ASME Code Sechon XI I
- 1. Owner PECO Enerav Company Date April 27.1998 Name 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address
- 2. Plant timenck Generatino Staten Unit 1 i Name l P O Bor 2300. Sanatoaa. PA 19464-2300 Work Order No C0179739 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A i Name Authonzation No. N/A l
P O Box 2300. Senatoaa. PA 19464-2300 Expiraton Date N/A Address
- 4. Identification of System 051 RHR LPCI Line No DlA112 HV-051-1F0178
- 5. (a) Applicable Construction Code ASME lit 19 74 Edition, S74 Addenda, 1567.1682.1516 1 Code Case (b) Applicable Edition of Secten XI Utilced for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME Code Name of Name of Manufacturer National Other Year Built Replaced, or Stamped Component Manufacturer Senal No. Board No. Identification Replacement (Yes or No)
N/A N/A 1998 Replacement No Stem BW/IP S/N.- 7383 Ht No. 48381 N/A N/A 1998 Replacement Yes P WM l Ht No. E3650 Guides (2) N/A N/A 1998 Replacement No 7, Desenption of Work installed RHR LPCI valve performance enhancements per MOD P00658-1 l l 8 Tests conducted: Hydrostatic 7 Pneumatic - Nominal Operating Pressure : 1 Other a Pressure 1050 psi Test Temp 165 *F. l NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) sue 81/2 in. x 11 in., (2) informa-l tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is l recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N.Y.10017 l l l l
W/O No. C0179739 Sheet 2 of 2 FORM NIS-2 (SACK)
- 9. Remarks installed disc ouide modifcaten kit into valve body in order to tohten clearances between disc ouides and disc Applicable Manufacturers Data Reports to be attached Installed new disc. disc Guides and smart stem per ECR LG 97-02073 l
CERTIFICATE OF COMPLIANCE We artify that the statements rnade in the report are corred and this replacement conforrns to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certkate of Authorization N NA Expiration Date NA Signed . u .c . Enoineer Date Od 27.19 98 Owner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l & I Company of Hartford. CT . . havejnspected the components desenbed in this Owners Report dunng the pered N/Ze/98 to A/3/9B . and state that to the best of my knowledge and belief, the Owner has p#rforfned examinations and tai 4n 6rrectue measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Secton XI. By sgning this artifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinatens and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. Commissions PA-2497 f.N & A , j inspectors'Sgnature [ National Board. State Province, and Endorsernents Date 8 31998 (12/s2)
i l l FORM NtS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1
- 1. Owner PECO Eneray Company Date April 27.1998 l Name '
2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 , Address
- 3. Plant Limenck Generatina Station Und 1 Name P O Box 2300. Sanatoca, PA 19464-2300 Work Order No C0179741 Address Repair Organcaton P O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authornation No. N/A P O. Box 2300. Sanatnaa. PA 19464-2300 Expiraton Date N/A Address
- 4. Identificatxm of System 051 RHR LPCI Line No DLA 112 HV-051-1F017C
- 5. (a) Applicable Construct on Code ASME Ill 19 74 Edihon. S74 Addenda, 1567.1682.1516-1 Code Case (b) Applicable Edition of Section XI Utilced for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and NpaeaentComponents Repaired, ASME Code Name of Name of Manufacturer Natonal Other Year Built Replaced, or Stamped Component Manufacturer Senal No. Board No. Identification Replacement (Yes or No) g N/A N/A 1998 Replacement No Ht No. 48381 N/A N/A 1998 Replacement Yes Otse BW/IP S/N: Y573 Ht No. E3650 N/A N/A 1998 Replacement No Guides (2)
Seat Ring Ht No. D9159 N/A N/A 1998 Replacement No Rx. Sde
- 7. Desenption of Work Installed RHR LPCI valve performance enhancements per MOD P00658-1.
- 8. Tests conducted: Hydrostatic : Pneumatic : Nominal Operating Pressure :
Other a Pressure 1050 osi Test Temp. 165 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. i (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017
i W/O No. C0179741 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Installed dec auide modification kit into vane body in order to tehten clearances between disc auides and dsc.
Apphcable Manufacturers Data Reports to be attached Installed new dsc. dse cuides and smart stem per ECR LG 97-02073 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this _ reclamment conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed , _ - ' . Enaineer Date O d. ZT .19 i E Owner or Owners Designee, Title CERTIFICATE OF INSERV:CE INSPECTION 1, the undersigned, holding a valid commission issued by the Natonal Board of Boiler and Pressure VesselInspectors and the State or Province of Pennsvtvania and employed by H S B I & l. Company of Hartford. CT . in this Owners Report dunng the penod NA/98 to have)7 8L / 9 8nsgected the components
. and state that desenbed to the best of my knowledge and belef, the Owner has p6rforfned examinations and tak6n o6rrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing tnis cert.f icate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection. Commissions PA-2497 f.N & A Inspectors $ignature [ National Board, State, Province, and Endorsements Date _ 3 1998 (12/82) I l l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Secten XI l' 1 i l 1, Owner PECO Enerav Company Date April 27,1998 Name 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address
' 3. Plant Limenck Generatina Station Unrt 1 l Name l
P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0179742 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzaten No. WA P O Box 2300 Sanatoaa. PA 19464-2300 Expiration Date N/A Address C. IdentAcation of System 051 RHR LPCI Line No. DLA-112 HV-051-1F017D l
G. (a) Applicable Construction Code ASME lit 19 74 - Edition, S74 Addenda, 1567.1682.151G-1 Code Case (b) Applicable Editon of Sedon XI Utdized for Repars or Replacements 19 86
- 6. Identifcaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Code Nar,1e of Name of Manufacturer Natonal Other Year Built Replaced, or Stamped Component Manufacturer Serial No. Board No. Identification Replacement (Yes or No)
. Stem BW/IP S/N: 7385 Ht No. 48381 f
1 e N/A N/A 1998 Reptemment Yes j Dec BW/IP S/N: YS72 i HtNo.E3650 N/A N/A 1998 Replacement . No l Guides (2)
- 7. Desenption of Work Installed RHR LPCI vele performance enhancements Der MOD P00658-1.
- 8. Tests conducted: Hydrostate : Pneumate : Nominal Operating Pressure :
i Other e Pressure 1050 osi Test Temp. 165 'F. l l NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-l ton in items 1 through 6 on the report is included on each sheet, and (3) each sheet is numbered and the number of sheets is . l recorded at tne top of this form. l l (12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l
W/O No. C0179742 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Installed drse auide modification kit into valve body in order to tehten clearances between disc ouides and disc Applicable Manufacturers Data Reports to be attached installed new disc, disc auides and smart stem per ECR LG 97-02073 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No._ NA Expiration Date NA Sgned . . au. . Enaineer Date 64 ZT .19 98 Dwner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B f & I Company of Hartford. CT _ _
have,insgected the components desenbed in this Owners Report durr.g the penod WAff8 to B/3/98 . and state that to the best of my knowledge and belief, the Owner has/ performed examinations and tal(en 63rrective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By sgning this certificate neither the Inspector nor his 6mployer makes any warranty, expressed or implied, conceming the examinations and correctnre measures descreed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.
/ Commissions PA-24971.N & A inspectors Sgnature / National Board, State Province, and Endorsements Date 8/ 19 78 (12/82)
i l i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI j
- 1. Owner PECO Enerav Company Date July 24.1998 Narne 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatina Station Unit 1 Name P.O. Box 2300. Eanatoos. PA 19464-2300 Work Order No. C0179977 Address Repair Organizaten P.O. No Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code SymbolStamp N/A Name Authorization No. N/A {
P.O. Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Line No. HBB-118 051-1193 l
- 5. (a) Applicable Construction Code ASME Ill 19 74 Edition. Winter 1974 Addenda, N-416-1 Code Case !
(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component l Manufacturer Serial No. Board No. Identification Replamment Stamped (Yes or No) 1 051 1193 ATWOOD & 1-11248-01 N/A
- 114 83498 1998 REPLACEMENT YES 20' VALVE MORRILL l ( 2 ) 20" l FLANGES COFFER FLANGE HEAT CODE N/A *114-91448 N/A REPLACEMENT NO HBB-118 'PCA6' (40)1 1/8" FLANGE RONSON HEAT # 71127 N/A
- 114-83498 N/A REPLACEMENT NO STUDS MANUFACTURING TRACE # Q229
( 40 ) 1-1/8* FLANGE RONSON HEAT # M63670 N/A
- 114-83498 N/A REPLACEMENT NO NUTS MANUFACTURING TRACE # O210 HBB-118-1F PIECE # 1 COLONIAL HEAT CODE N/A
- 114-92S67 N/A REPLACEMENT NO COUPLING MACHINE 'AFG'
- Traceability per PECO Part Code Number.
- 7. Description of Work Instaned 20' Butter % valve. flances and 3/4" test tao.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other., Pressure 365 osi Test Temp. N/A *F,
' NOTE: Supplernental sheets in form of lists, siretches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is induded on sad sheet. and (3) each sheet is numbered and the nurnber of sheets is recorded at the top of this form, w___________-__________-
W/O No. C0179977 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Valve manufactured to ASME lit.1971 edition. summer 1972 addenda.
Appleable Manufacturers Data Reports to be attached Manufacturers Data Reports are traceable by PECO Work Order packsoe. Valve replacement completed in accordance with PECO Enoineerina Chance Request 98-00127. CERTIFICATE OF COMPLIANCE We certdy that the statements rnade in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certficate of Authorization No. NA Expiration Date NA Signed b% k J H KRAMER . Enaineer Date JuN 24 .19 98 (pwner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid corrrnission issued by the Natmal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B t & L Company of Hartford. CT have e'nspeyed the components desenbed in this Owners Report dunng the penod N/El /9A to -//f.7/fA . and state that to the best of my knowledge and belief, the Owner his performed examinations and tak6n cotfectue measures described in LNs Owners Report in accordance with the requirements of the ASME Coda, Section XI. By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owne/s Report. Furthermore, neither the inspector nor his employer sha!! be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commssions PA-2497 f.N & A
~ inspectoffS' nature / National Board, State, Province, and Endorsements Date 7f 27 1990 (12/82)
l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enercy Company Date July 24.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2
- l Address l
1 2. Plant Urnerick Generatino Station Unit 1 Name P O Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0179977 i Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Line No HBB-118 -1 and HBB-118-H01
- 5. (a) Applicable Construction Code ASME Ill 19 74 Edition, Winter 1974 Addenda, N416-1 Code Case (b) Applicable Edition of Section XI Utilmed for Repairs or Replacements 19 86
- 6. Identificaten of Components Repaired or Replaced and Replacement Components l l Repaired, ASME Name of Name of Manufacturer National Other Year Replaced, or Code Cornponent Manufacturer Serial No. Board No. Identification Built Replacement Stamped (Yes or No) i 1
( 4 ) WELDED LUKENS STEEL HEAT # C7348 N/A
- 114 40981 N/A REPLACEMENT NO I PIPE LUGS
( 2 ) 1 1/2" BERGEN PART8 5001 - N/A
- 114-00236 N/A REPLA01EMENT NO HANGER RODS PATERSON 1-1/2"
- Traceability per PECO Part Code Number,
- 7. Description of Work Reofaced weld luas and rods for obe support HBB-118-H01
- 8. Tests conducted: Hydrostatic 0 Pneumatic D NominalOperating Pressure m Other_ Pressure 365 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is induded on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. C0179977 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Welded luas installed in accordance with ASME III.1974 edition and winter 1974 addenda .
Appleable Manufacturers Data Reports to be attached Hanaer rods installed in accordance with ANSt 831.7.1969 eddion and March 10.1971 addenda. Work completed in accordanm with PECO Enaineerina Chance Recuest 98-00127. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed k_M J H. KRAMER . Enaineer Date July 24 .19 98 Obwner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION , I, the undersigned, hole.bg a valid commission issued by the National Board of Boiler and Pressure Vessel Inspedors and the State or Province of Pennsvivania and employed by H S B l & l. Company of Hartford. CT havy in the components desenbed in this Owners Report during the period N/2//FM to 7/27 8 . and state that { to the best of my knowledge and belief, the Owner has p'erformed exarranates and 16 ken d' o rredive measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. l By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective rneasures desenbed in this Owners Report. Furthermore, neither the lospector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 1 8 _M. Commissions PA-24971.N & A Inspectors' Signature National Board, State, Province, and Endorsements
//
Date 7//71998
/
(12/82) l t
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Seebon XI
- 1. Owner PECO Enerav Company Date April 27.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 Address
- 2. Plant timerick Generatina Station Unit i Name P.O Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0180158. C0180192. C0180196.
Address C0180198 Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300 Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Idenbfication of System 051 Residual Heat Removal Line No HBB-117
- 9. (a) Apphcable Construcbon Code ANSI B31.7 19 69 Edition, March 1971 Addenda, N/A Code Case (b) Applicable Edibon of Sechon XI Utihzed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME Code Name of Name of Manufacturer National Other Year Built Replaced, or Stamped Component Manufacturer Senal No. Board No. Identification Replacement (Yes or No)
N/A N/A N/A 1998 Replacement No ' HBB-117 H030 Power !
" N/A N/A N/A 1998 Replacement No HSB-117 H031 Power
'P" N/A N/A N/A 1998 Replacement No HBB-117 H032 Power 9'" - N/A N/A N/A 1998 Replacement No HBB-117 H033 Power
- 7. Desenpbon of Work Insta!Ied oce suoports associated with MOD P00285-1.
- 8. Tests conducted: Hydrostatic : Pneumatic : Nominal Operating Pressure :
Other : Pressure N/A osi Test Temp. N/A ' F. NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) . This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l l-
l l
'i1 W/O No. C0180158 et al Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks installed supports for new suction strainers per ECR LG 97/J2021.
Applicable Manufacturer's Data Reports to be attached l l CERTIFICATE OF COMPLIANCE We certdy that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement l l Type Code Symbol Stamp NA j I Certificate of Authorization No. NA Expiratior.'vate NA j Signed . .b m[ Enaineer Date 06 04 .19 in Owner or Owners Designee. Ttle I CERTIFICATE OF INSERVICE INSPECTION
- 1. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesal Inspedors and the State or Province of Pennsylvania and employed by H S B I & l. Company of Hartford, CT .
havejnsgected the components desenbed ; in this Owners Report dunng the penod 4/#/9f3 to A/6/98 . and state that i to the best of my knowledge and belef, the Owner has perfonhed examinations and ta(en dxTective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code. Section XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective rnessures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer i shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this i inspection.
/* Commissions PA-24971.N & A inspectors Signature
[ National Board, State, Province, and Endorsernents Date 8 8 19 9 8 (12/82) l i I
i l FORM NIS-2 OWNER 15 REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owrer PECO Enerav Company Date Jufv 9.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatino Station Unit i Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0181359 Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Auttivik.u,,, No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Residual Heat Removat (System 051) Line No. HBB-119-01
- 5. (a) Applicable Construction Code ASME lit 19 74 Edition, Winter 74 Addenda, N/A Code Case (b) Applicable Edition of Section Xi Ublized for Repairs or Replacements 19 86
- 6. Idenbficatiori of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
(3)1* NOVE HEAT # 96469 N/A
- 114-92584 N/A REPLACEMENT NO FLANGE MACHINE LOT #
STUDS 35870078 (4)1* HEAT # FLANGE ALLIED NUT 090309, N/A
- 114-92651 N/A REPLACEMENT NO NUTS & BOLT HEAT CODE
'047'
- Traceability per PECO Part Code Number
- 7. Description of Work Replaced studs and nuts on 16' oipe flanoe.
t 8. Tests conducted: Hydrostatic 0 Pneurnatic 0 NominalOperating Pressure m Other , Pressure 20feetwaterlevet osi Test Temp. N/A *F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and tre number of sheets is recorded at the top of this form. l l i
W/O No. C0181359 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XL repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiraton Date NA Signed b N b____ __
J H. KRAMER. Enaineer Date Julv 9. .1998 y - Owner or Owners Designee, Title i CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commesson issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B 1 & l. Comoany of Hatrd. CT . . have' the components desenbod in this Owners Report during the penod W/3/9A to "7 / 79A . and state that to the best of my knowledge and belief, the Owner has pefformbd examriatens and taken forredsve measures desenbod in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective rneasures described in this Owners Report. Furthermore, neitrer the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- Commissions PA-24971.N & A V
inspectors Signature / Natenal Board, State, Province, and Endorsements Date 7//7 f ig 76 (12/82) 1 l
7 i . l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
]
i i
- 1. Owner PECO Eneroy Company Date July 6.1998 Name I I
2301 Market Street. Philadelphia. PA 19101 Si a 1 of 2 ! Address
- 2. Plant timerick Generatino Station Unit i Name P.O Box 2300. Sanatoca PA 19464-2300 Work Order No. C0182169 and C0175931 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A l
P.O. Box 2300. Sanatoca PA 19464-2300 Expiration Date N/A Address i
- 4. Identification of System Residual Heat Removal (System 051) Line No DCA-318 051-1F065C i l
S. (a) Applicable Construction Code ASME lit 19 71 Edition, Winter 1972 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repars or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replssrnent Components Repaired, /.3ME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
%
- rt COLONIAL HEAT CODE N/A
- 114-79169 N/A REPLACEMENT NO PIPE PLUG MACHINE CO. 'CHY' I l
l 1
- Traceabihty per PECO Part Code Nurnber. *
- 7. Description of Work Replaced commercial steel packino leakoff olm with ASME material and seal welded
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other., Pressure 955 osi Test Temp. 542 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is nurrbered and the number of sheets is recorded at the top of this form.
l l I l l W/O No. C0182169 l Sheet 2 of 2 i 1 i l I FORM N!S-2 (BACK)
- 9. Remarks None.
Applicable Manufacturer's Data Reports to be attached
- CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Exptahon Date NA Signed bb- 0. L J H. KRAMER . Encineer Date July 6 .19 98 06vner or' Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commesson issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H.S B.! & l. Company of Hartford. CT .
have the components desenbod in the Owners Report dunng the period 4/2/9F5 to 715 f8 . and state that to the best of my knowledge and belief, the Owner has performed exarninabons and tak6n co/redive measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his ernployer makes any warranty, expressed or implied, concoming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conrected with this inspection.
/- Commasons PA-2497 f.N & A inspectors Signature gV Natonal Doard, State. Province, and Endorsements Date 8 1998
/
(12/82)
7 I i l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I As Required by the Provisions of the ASME Code Sechon XI { l
- 1. Owner PECO Enerav Company Date July 6.1998 Name 2301 Market Street. Philadeloh%. PA 19101 Sheet i of 2 Address
- 3. Plant t.imerick Generatino Station Unit i Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0182173 l Aodress Repair CrW6, P.O. No., Job No. etc.
- 3. Work Perfonred by PECO Enerav Company Type Code Symbol Stamp N/A
- Name Authonzation No. N/A P O. Box 2300. Sanatoaa. PA 19464-2300 Ew. con Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Line No DCA-318 051-1F065A
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Winter 1972 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repaws or Replacements 19 86
{
- 6. Identification of Components Repaired or Replaced and Replacement Components I
l Repared, ASME l l Name of Name of Manufacturer Nabonal Other Year Built Replaced, or Code ; Component Manufacturer Serial No. Board No. Identacation Replacement Stamped i (Yes or No) l
' 7. Description of Work Added seal weld to existino packino leakoff plua
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperahng Pressure a Other_ Pressure 955 osi Test Temp. 542 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
l W/O No. C0182173 , Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Leskoff pluo was previousht reolaced via PECO work order R0544005 and reported on NfS-2 Code Data Report.
Applicable Manufacturers Data Reports to be attached i CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XL repair or replacement Type Code SymbolStamp NA Certificate of Authorization No. NA Expiration Date NA Signed -
. J H. KRAMER . Enaineer Date July 6 .19 98 Divner or Owners Designee, Tiue CERTIFICATE OF INSERVICE INSPECTION ;
1
- 1. the undersigned, holding a valid commissen issued by the National Board of Boiler and Pressure Vessel inspedors and the State i or Province of pennsylvania and employed by H S B I & l. Comoany of !
Hanford. CT have~ components desenbod in this Owner's Report dunng the period S//3 /FE> to 715 9 . and state that to the best of my knowledge and beref, the Owner has p6tfomfed examinations and tak(n cofractrve rneasures desenbod in this Owner's Report in accordance with the requirements of the ASME Code, Sedion XL By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures described in this Owners Report. Furthermore, nemer the inspector nor his employer shall be liable in any man for any personalinjury or property damage or a loss of any kind arising from or connected with this l inspection. Commasions PA-24971.N & A inspector's Signature / National Board, State, Provna, and Endorsements Date 7//5
/
19 9B (12/82) , l
l l l l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Section XI i
- 1. Owner PECO Eneroy Company Date July 6.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Und 1 Name P.O. Box 2300. Sanatona. PA 19464-2300 Work Order No. R0544011 Address Repair Organgaton P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Syntol Stamp N/A Name Authorization No. N/A P O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Residual Heat Removal (System 051) Line No. DCA-318 051-1F0650
- 5. (a) Applicable Construction Code ASME fil 19 71 Edition, Winter 1972 Addenda, N/A ' Code Case (b) Applicable Edition of Section XI Utdeed for Repairs or Replacements 19 86
- 6. Identication of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identifcaten Replacement Stamped (Yes or No)
%
- NPT WFl HEAT CODE N/A *114-79169 N/A REPLACEMENT NO PIPE PLUG NUCLEAR '820XNA'
- Traceability per PECO Part Code Number.
- 7. Description of Work Replaced commercial steel packinq leakoff plua with ASME material and seal welded
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other,,, Pressure 1050 osi Test Temp. 165 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l
l W/O No. R0544011 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None.
Applicabis Manufacturers Data Reports to be attached I CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code. Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed 1_ N, b - J H. KRAMER . Enaineer Date July 6
~
. .19 98 Qwner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S.B I & l. Company of I Hartford. CT .
have' the components desenbod in this Owners Report during the penod N/2 /ff5 to the best of my knowledge and belief, the Owner hYs performed exanwnstons and taidn~codecrve measures described in this to 716 98 . and state that ) Owners Report in accordance with the requirements of the ASME Code, Sedon XI. By signing this certificate neither the inspector nor his employer rnakes any warranty, expressed or imphed, conmming the examinabons and corrective measure 3 described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection. CmeArs PA-2497 f.N & A inspectors Signature / National Board, State Province, and Endorsements Date 7 5 ig 98
/
1 (12/82) J
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerav Company Date July 7.1998 Name 2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P.O Box 2300 Sanatoaa PA 19464-2300 Work Order No. ROS44752 Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O. Box 2300. Sanatoaa, PA 19464-2300 Expiration Date N/A Address
- 4. Identification of Systern Residual Heat Removal (System 051) Line No. DCA-104 051-1F0608
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Summer 1971 Addenda, 1516-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacerrents 19 86
- 6. Identification of Components Repaired or Replaced and Replacernent Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 4 Traceability per PECO Part Code Number.
- 7. Description of Work Added seat weld to existina packina leakoff plua
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure m Other_ Pressure 1050 osi Test Temp. 165 *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l 1 l l
W/O No. R0544752 Sheet 2 of 2 FORM NIS-2 (BACK) 4
- 9. Remarks None.
ApplicatAe Manufacturers Data Reports to be attached 1 CERTIFICATE OF COMPUANCE We certify that the staternents made in the report are correct and this replacement ccnforms to the rules of the ASME Code, Section XI. repair or replacement Type Code SymbolStamp NA Certificate of Authorization No. NA Expiration Date NA Signed 1 M.L J H KRAMER . Enoineer Date July 7 .19 98
%ner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by H S B i & l. Comoeny of Hartdord. CT -
havg risppcted the components desenbed in this Owners Report during the period 4//2/fA to 7//5#R; . and state that to the best of my knowledge and belief, the Owner has p6tforr6ed exaninahons and taken c6rrectrve measures desabed in this Owner's Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in an manner for any personal irjury or property damage or a loss of any kind arising from or connected with this inspection. 8 Commissions PA-2497 f.N & A inspectors Signature / Natmal Board, State, Province, and Endorserrrnts Date 7!/
/ /
9819 M (t2/82)
. a i
1 1 l J
l FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI
- 1. Owner PECO Enemy Comoany - Date July 9.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 i Name j l
P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0172617 Address Repair Organization P.O. No., Job No. etc. l
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Core Soray (System 052) Line No. GBB 113-1 052-1F003A
- 5. (a) Applicable Construction Code ASME lil 19 74 Edition, Winter 74 Addenda. N-4161 Code Case (b) Applicable Edition of Section XI Utdized for Repan or Replacements 19 86
- 6. Identification of Components Repaired or Rylaced and Replacement Components l
Repaired, ASME Mame of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identdicabon Replacement Stamped (Yes or No) GBB-113-1E (2) PIECE #20 CAPITOL HEAT CODE N/A
- 114-92667 WA REPLACEMENT NO j COUPLINGS MFG. CO. '821' '
GBB-113-1E (2)PIEC#19 OUANEX HEATS N/A
- 114-90036 N/A REPLACEMENT NO 3/4* PIPE 267722 032-1123 3/4" VALVE EDWARD S/N 85AIO N/A
- 114-98825 1996 REPLACEMENT YES 032-1124 3/4" VALVE EDWARD S/N 8CAIO N/A
- 114-98825 1996 REPLACEMENT YES GBB-113-1E i
(2) PIECE #21 CRAWFORD 304L-811 1- N/A
- 114-91123 N/A REPLACEMENT NO l ADAPTERS FITTING CO. 0072 l
- Traceability per PECO Part Code Number l
7 Desenption of Work Installed 3/4' valve by-cass pioina
- 8. Tests conducted: Hydrostatic D Pneumatic D NominalOperating Pressure a Other Pressure 280 osi Test Temp. N/A 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
! i i ! l W/O No. C0172617 Sheet 2 of 2 i l
- FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enaineerino Chance Recuest# 9603220.
Applicable Manufacturers Data Reports to be attached Manufacturers Data Reports are traceable by PECO Work Order packace. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reotacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b - . a - J H KRAMER. Erdir=er Date July 9. .1998 (Awner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a varid commission issued by the Nabonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by H S B 1 & l. Comoany of Hartford. CT have,inspepted the components desenbed in this Owners Report dunng the period 9//7/9d to 7/2B/98 . and state that to the best of my knowledge and belief, the Owner has derfofmed examinations and tadien cofrective rneasures descnbod in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. , Commissens PA-2497 f.N & A inspectors' Signature / National Board, State, Province, and Endorsements Date M 19f8 (12/82)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Company Date July 10.1998 Name ,
2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0177851 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Comoany Type Code Symbol Stamp N/A Name Authorizabon No. N/A P.O. Box 2300. Sanatoca PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Core Soray fSystem 052) Line No. DLA-111 HV-052-1F005
- 5. (a) Applicable Construction Code ASME ll1 19 74_ Edition, Summer 1974 Addenda, 1516-1.1567and 1682 Code Case (b) Applicable Edition of Section X1 Utilized for Repairs or Replacements 19 86
- 6. Identrficaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Narne of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
- 7. Description of Work . Drilled 1/8' relief hole in cate vatve wedoe to prevent pressure lockina G. Tests conducted: Hydrostatic C Pneumabc 0 NominalOperating Pressure m Other. Pressure 1050 osi Test Temp. 165 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) infoima-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
l l W/O No. C0177851 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks work completed in accordance with PECO Enaineerina Chance Reauest# 9602606 Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We artify that the statements made in the report are corred and this reolamment conforms to the rules of the ASME Code, Section XI. repair or reptamment Type Code Symbol Stamp NA Certificate of Authorization No. NA Expraton Date NA Signed (m . J H KRAMER . Enaineer Date Juiv 10 .19 98 g mer or' Owner's Designee, Tale CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H.S B.I.& l. Company of Hartford. CT have' the components desenbed in this Owner's Report dunng the period 4/2/9M to 7 23 98 . and state that to the best of my knowledge and belief, the Owner hds performed exarrunahons and tal6n con 6ctrve measures desenbod in this Owner's Report in accordance with the requirements of the ASME Code, Sechon XI.
By signing this certdicate neither the Inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures desenbod in this Owners Report. Furthermore, nether the inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection. Comrwsons PA-2497 f.N & A Inspe'ctors Signature / National Board, State, Provnce, and Endorsements Date A3 19 9 8)
/
(12/82)
I l l i FORM NiS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Sechon XI
- 1. Owner PECO Enerav Company Date July 10.1998 Narne 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address 2.' Plant Limerick Generatina Station Unit 1 Name .
l P.O Box 2300 Senatoaa. PA 19464-2300 Work Order No. C0179416 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp _ N/A Name Authonzabon No. N/A P.O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Core Soray (System 052) Line No. DCA-320 0521F007A
- 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Winter 1972 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components i
Repared, ASME Narne of Name of Manufacturer Nabonal Other Year Built - Replaced, or Code Component Manufacturer Serial No. Board No. Identshcation Replacement Stamped (Yes or No) HEAT #
.1/2
- NPT ALLOY 715078 N/A
- 114-00641 N/A REPLACEMENT NO PIPE PLUG STAINLESS HEAT CODE PRODUCTS. 'JCE'
- Traceabildy per PECO Part Code Number.
- 7. Desenption of Work Reotaced commercial steel osckino leakoM olua with ASME material and seal welded.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperahng Pressure a Other_ Pressure 1050 osi TestTemp. 165 'F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provded (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. I
i W/O No. C0179416 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None.
Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiraton Date NA S'g ned b N . b - Date Juhr 10 .19 98 (fwnerorDwnersDesignee ,J H. KRAMER . Enoineer Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H.S B I & I Company of Hartford CT have inspec.ted the components desenbod in this Owners Report dunng the penod 4/2/9A to 7/25/96 . and State that to the best of my knowledge and belief, the Owner has pdrfonhed exammatens and taidn cor(ective measures descnbed in this Owners Report in accordance with the requirements of the ASME Code, Secten XI. By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or hiplied, concoming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commesens PA-2497 f.N & A inspectors Signature / Natonal Board, State, Province, and Endorsements Date 2.31998 (12/82) l l l l t
i i l l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS 1 As Required by the Provisions of the ASME Code Section XI i
- 1. Owner PECO Enerav Comoany Date April 27.1998 Name .
l 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address i l I 3. Plant Limerick Generatina Station Unit 1 I I Name l P O Box 2300 Sanatoaa. PA 19464-2300 Work Order No C0180179. C0180239. C0180240. I Address C0180251 i Repair Organization P.O. No., Job No. etc. I
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A ,
Name Authonzation No. N/A ; P.O Box 2300. Senatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System 052 Core Sorav Line No. HBB-120
- 6. (a) Applicable Construction Code ANSI B31.7 19 69 Edition, March 1971 Addenda, N/A Code Case (b) Appicable Editon of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components
! Repaired, ASME Code Name of Name of Manufacturer Natonal Other Year Built Replaced, or Stamped Component Manufacturer Serial No. Board No. Identificaten Replacement (Yes or No) Bergen N/A N/A N/A 1998 Replacement No HBB-120 H038 Power Bergen N/A N/A N/A 1998 Replacement No HBB-120 H039 Power Bergen-N/A N/A N/A 1998 Replacement No HBB-120 H040 Power ; 4 0*P" N/A N/A N/A 1998 Replacement No HBB-120 H041 Power
- 7. Desenpton of Work Installed oice supports assoosted with MOD P00285-1.
- 8. Tests conducted: Hydrostatic : Pneumatic : NominalOperating Pressure :
Other : Pressure N/A osi Test Temp. N/A *F. l
- l. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the f. umber of sheets is recorded at the top of this form.
]
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 i I J
i-W/O No. C0180179 et al Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks installed supports for new sudion strainers per ECR LG 97-02021.
Appicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE l We certify that the statements rnade in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzation No. _ NA Expiration Date NA Signed . . c I Enaineer Date O Od. .19 9b Owner or Owners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid cornmission issued by the National Board of Boiler and Pressure Vessellnspectors and the State or Province of Pennsylvania and employed by H.S B 1 & I Company of Hartford. CT have iryspegted the components desenbed in ths Owners Report dunng the penod dJ/4 /M to A /5/98
~
. and state that to the best of my knowledge and belief, the Owner has pierforfned examinations and take6 cor(ective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.
By signing this certifcate neither the Inspector nor his employer rnakes any warranty, expressed or implied, conceming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection.
/ Commissions PA-24971.N & A inspectors Sgnat(ire' [/ National Board State, Province, and Endorsements Date I19Nb (12/82)
)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Enerny Comoany Date July 10.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 Address
- 2. Plant Limerk* Generatina Station Unit i Name P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. C0181208 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Energy Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Core Soray (System 052) Line No GBB-115 HV-052-1F0iSA
- 5. (a) Applicabe Construction Code ASME lil 19 71 Edition, Summer 1971 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilced for Repars or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year bug Replaced, or Code Component Manufacturer Serial No. Board No. Identdication Replacement Stamped (Yes or No) 1/2
- NPT BONNEY HEAT # 9148 N/A *114-94791 N/A REPLACEMENT NO PIPE PLUG FORGE
- Traceability per PECO Part Code Nurnber.
- 7. Description of Work Replaced commercial steel packino leakoff clua with ASME material.
- 8. Tests conducted: Hydrostatk: O Pneumatic 0 NominalOperating Pressure e Other. Pressure 282 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items i through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. CO181208 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed bn N = - - J H. KRAMER . Enaineer Date Jutv 10 .19 98 pn5r or Owners besignee, Trtle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by H S B 1.81. Company of Hartford. CT ected the components desenbed havejnsp/f8 in this Owners Report dunng the penod N //fff5 to 7/43 . and state that to the best of my knowledge and beref, the Owner has p6tfo/med examinatens and taken c6trectrve measures desenbed in this Owners Report in accordance with the requircrnents of the ASME Code, Sedon XI.
By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corredive rneasures desenbed in this Owners Report. Furthermore, neither the inspector nor his ernployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. A Commissions PA-24971,N & A
' Inspectors S$ nature / National Board, State, Provoce, and Endorsements Date 7 231978 (12/82)
l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI j l
- 1. Owner PECO Enen.y Comoany Date JuN 10.1998 Narne 2301 Market Street, Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P.O Box 2300. Sanatoca PA 19464-2300 Work Order No R0544065 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enercy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A j Address '
- 4. Identification of System Core Soray fSystem 052) Line No EBB-132 rN-052-1F004A
- 5. (a) Applicable Construdion Code ASME lit 19 71 Edition, Summer 1973 __ Addenda. N/A Code Case (b) Applicable Edition of Sechon XI Ubleed for Repairs or Replacements 19 86 l
- 6. Identificabon of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 1/2
- NPT WFI HEAT CODE N/A
- 114-79168 N/A REPLACEMENT NO PIPE PLUG NUCLEAR '615XNB'
- Traceabihty per PECO Part Code Number.
- 7. Description of Work Replaced commercial steel packina leakoff plua with ASVE material and seal welded
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure u Other _ Pressure 282 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of ksts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l l l l
W/O No, R0544065 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None.
Applicable Manufacturers Data Reports to be attached m-I CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XL repair or replacement Type Code SymbolStamp NA Certificate of Authorization No. NA Expirahon Date NA Signed b b. - - J H KRAMER . Enoineer Date JuN 10 .19 98 Ofwner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of Pennsvivania and employed by H S B 1 & l. Company of Hartford. CT have' ed the components described in this Owners Report dunng the period //////97 to 7/15 . and state that to the best of my knowledge and belief, the Owner has perfdrmed exarrunations and tden c6rrectue measures desenbod in this Owners Report in accordance with the requirernents of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or coruacted with this inspection. Commissions PA-2497 f.N & A
" inspectors Signature
, / Nabonal Board, State, Provence, and Endorsements Date 7
/
23 199 8 (12/82) { 1 l I 1
l J l ) l I ' l FORM NtS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I As Required by the Provisions of the ASME Code Section XI l I i l 1. Owner PECO Eneroy Company Date July 10.1998 l Nm l 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 l Address
- 2. Plant Limerick Generatina Station Unit 1 Name P 0. Box 2300. Sanatoca. PA 19464-2300 Work Order No. R0544175 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enemy Company Type Code Symbol Stamp _ N/A Name Authorizabon No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Core Sorav (System 052) Line No DLA-110 HV-052-108 1
- 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer 1971 Addenda, 1516 Code Case 1
- (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Compononts Repaired or Replaced and Replacement Components I
Repaired, ASME i Name of Name of Manufacturer National Other Year Built Replaced, or Code i Component Manufacturer Serial No. Board No. Identification Replacement Stamped ! (Yes or No) I l 3/4
- NPT WFl HEAT CODE N/A *114-83343 N/A REPLACEMENT NO PIPE PLUG NUCLEAR '608YNA' l
l
- Traceability per PECO Part Code Number.
- 7. Description of Work _ Replaced commercial steel packino leakoff okia with ASME material and seal welded j
- 8. Tests conducted: Hydrostatic D Pneumatic D NominalOperating Pressure a Other _ Pressure 1050 osi Test Temp. 165 " F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l L__ _ _ _ _ _ _
W/O No. R0544175 Sheet 2 of 2 1 FORM NIS-2 (BACK)
- 9. Remarks None.
Apphcable Manufacturers Data Reoorts to be attached j CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reotacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expirabon Date NA Signed b N. J.H. KRAMER . Enoineer Date July 10 .19 98 Swner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l & l. Company of Hartford, CT have' the components descnbod in this Ownet a Report dunng the period N/2/9B to 7 9B . and state that to the best of my knowledge and belief, the Owner has pedormed exarmnetens and taken cdmKtive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Sedon XL By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conmming the examinations and corrective measures described in this Owners Report. Furthermore, nether the inspedor nor his employer shall be liable in any rnanner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection. Comrmssions PA-24971.N & A
' Inspectors Sgnature / Natonal Board, State, Province, and Endorsements Date 2519 f8 (12/82)
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI l
- 1. Owner PECO Enercy Company Date July 13.1998 Name i
2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatino Station Unit 1 Name P O Box 2300. Sanatoaa PA 19464-2300 Work Order No C0172374 l Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. h.A j P O Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System H,ch Pressure Coolant injection (system 055) Line No. HBB-108-H009
- 5. (a) Applicable Construction Code ANSI B31.7 1969__ Edition. March 10.1971 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components l
Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or j No) . (2) RIGID , STRUT BERGEN BP-2252-4 N/A
- 114-90618 N/A REPLACEMENT NO 4 ASSEMBLY PATERSON (4) END ATTACHMENT BERGEN BP-10004 N/A
- 114-90918 N/A REPLACEMENT NO ASSEMBLY PATERSON 1
- Traceability per PECO Part Code Number,
- 7. Desenption of Work Replaced struts and end attachments on pipe support.
- 8. Tests conducted: Hydrostatic D Pneumatic 0 NominalOperating Pressure c Other., Pressure N/A psi Test Temp. N/A 'F.
NOTE: Supplemental sheets in fom) of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept, ASME,345 E.47th St., New York, N.Y.10017
l W/O No. C0172374 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO NonC>nformance Report 96-01899.
Apphcable Manufactursts Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are correct and this reotacement conforms to the rules of the ASME Code, Section XL repair or replacement Type Code Symbol Stamp NA Certificate of Authorizabon No. NA Expiiation Date NA Signed 1- . - J H. KRAMER Enaineer Date Jutv13 .19 98 puner or' Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H.S B ! & l. Company of Hartford. CT have' the components desenbed in this Owners Report during the penod /////97 to 7 7A 9A . and state that to the best of my knowledge and belief, the Owner hafs pefformed examinahons and taktin corrdct've measures described in this Owners Report in accordance with the requirements of the ASME Code, Seebon XL By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures desenbod in this Owners Report Furthermore, neither the inspector nor his ernployer shall be liable in any manner for any personal irjury or property damage or a loss of any kind arising from or connected with this inspection. Commesions PA-2497 f N & A Inspectors Signature / National Board, State, Province, and Endorsements Date l/ 2819f/$ (12/82) o
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO EnerQv ComDany Date Juty 23.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant timerick Generatino Station Unit 1 Name P O Box 2300. Sanatoca. PA 19464-2300 Work Order No C0177358 Address Repar Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Ident:fication of System Hiah Pressure Cootant Iniedion (System 055) Line No. EBB-108 HV455-1F001
- 5. (a) Applicable Construction Code ASME lit 19 74 Eden, Winter 1974 Addenda, N-416-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)
HV-055-1F001 RING-O VALVE 97/1902 N/A
- 114-83150 1998 REPLACEMENT YES 12" VALVE EBB-129-H17 PIECE # 13 CHAPARRAL HEAT # N/A *114-01027 N/A REPLACEMENT NO WT5 X 15 STEEL 11374210 EBB-129-H17 PIECE # 14 NORTHWESTERN HEAT # N/A *114-93029 N/A REPLACEMENT NO W10 X 22 STEEL 62729 EBB-129-H17 PIECE # 15 BETHLEHEM HEAT # N/A *114-92855 N/A REPLACEMENT NO !
3/8' PLATE STEEL 401W5841
- Traceability per PECO Part Code Number.
- 7. Dest'iption of Work Replaced 12" steam admission valve and modifsd otDe support
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other_ Pressure 960 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings rnay be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l l l
l W/O No. C0177358 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Valve manufactured to ASME lit.1989 edition. no addenda and code case N424.
Appicable Manufacturers Data Reports to be attached Manufacturers Data Reports are traceable by PECO Work Order oscksoe Valve replacement completed in accordance with PECO Enoineerino Chance Reouest 97-01211. Valve stem replaced by General Electric via PECO Work Order C0181489 after installation. but no ASME code oarts reclamd CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reoiscement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Experaton Date NA Signed b- b _ J.H. KRAMER . Enoineer Date Juiv 23 .19 98 Winer or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION l, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H.S B 1 & l. Company of Hartfortl. CT have the wi.pse..e desenbod
^
in this Owners Report dunng the penod M2/9M to 73796 . and state that to the best of my knowledge and belief, the Owner has p6rforfned examenatens and ta66n cxwfedive rneasures described in this Owners Report in accordancs with the requirements of the ASME Code, Section XI. j By signing this certificate neither the inspector nor his employer rnakes any warranty, expressed or implied, concoming the ! examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with thi6 inspection.
/ Commissions PA-24971.N & A
^ inspectors %gnature ./ Natonal Board, State, Province, and Endorsements Date 8 7 19 7 8
/ !
1 (12/82) r i i f l 1
1 l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I As Required by the Provisions of the ASME Code Sechon XI
- 1. Owner PECO Eneroy Company Date Jutv 13.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 Address
- 2. Plant Limerick Generatina Station Unit 1
Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0178114 Address Repair Organization P.O. No., Job No etc.
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O Box 2300. Sanatoos. PA 19464-2300 Experation Date N/A Address
- 4. Identification of System Hiah Pressure Coolant iniection (System 055) Line No HBB-109 HV-0551F042 j
- 5. (a) Applicable Construction Code ASME til 19 71 Edition. Summer 1971 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utslized for Repairs or Replamments 19 86
- 6. Identification of Components Repaired or Replaced and Reptamment Components l
Repaired, ASME I Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 1/2
- NPT WFl HEAT CODE N/A *114-79168 N/A REPLACEMENT NO PIPE PLUG NUCLEAR 550WNB I
- Traceability per PECO Part Code Number.
Drilled 1/8' relief hole in gate valve wedge to prevent pressure locking.
- 7. Description of Work Replaced commercial steel osckina leakoff olua with ASME material.
l l 8. Tests conducted: Hydrostatic 0 Pneurnstic 0 NominalOperahng Pressure a Other_ Pressure 22.3 feelwaterlevel osi Test Temp. N/A 'F. l NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-l tion in !! ems 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is I recorded at the top of this form. l
W/O No. C0178114 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Work completed in accordance with PECO Enoineerino Chance Reouest# 9603080.
Apphcable Manufacturers Data Reptwts to De attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b N. - J!i KRAMER . Enoineer Date Jutv 13 .19 98 ifhuner or Owners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H S.B I & l. Company of Hartford. CT eded the cornponents desenbed in this Owner's Report dunng the penod 4/2/78 to havp 7/24insp/9B . and state that to the best of my knowledge and belief, the Owner has $erfdfmed examinatens and 16 ken 06trectue measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Secton XI. By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinabons and corrective rnessures desenbod in thie Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection. M - Commssions PA-2497 f.N & A inspectors Signature / Natonal Board, State, Provoce, and Endorsements Date l/2319 V8
/
(12/B2) l 1 i
l l l I ' i I l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ! As Required by the Provisions of the ASME Code Sedon XI l 1 Owner PCCO Enerav Company Date July 13.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address i'
- 2. Plant Limerick Generatino Station Unit 1 Name.
P O Box 2300. Senatoaa. PA 19464 2300 Work Order No. C0179933 Address Repair Organizaten P.O. No., Job No. etc. , 1
- 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Hiah Pressure Coolant iniection (System 055) Line No. HBB-108 HV-0551F072
- 5. (a) Applicable Construction Code ASME fil 1971 Edition. Summer 1971 Addenda, N/A Code Case (b) Appricable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufadurer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Bosrd No. Identification Replacement Stamped (Yes or No) 1/2 " NPT WFl HEAT CODE N/A *114-79168 N/A REPLACEMENT NO PIPE PLUG NUCLEAR 550WNB GATE ANCHOR VALVE S/N N/A HV-055- 1978 REPAIRED YES VALVE DISC DARLING E-542241 1F072 HEAT #
DISC BORG 813S65770- N/A
- 114 4 3483 N/A REHACEMENT NO GUIDE WARNER J31624 STEM BORG HEAT # N/A
- 114-83482 N/A REPLACEMENT NO WARNER 503204
'* T' traceability per PECO Part Code Number.
Repaired valve wedge by welding. Replamd valve wedge guide and stem. ! 7. Desenption of Work Replaced commercial steel packino leakoff Dlua with ASME material l 8. Tests conducted: Hydrostatic C Pneumatic D NominalOperating Pressure a Other.,, Pressurz 960 osi Test Temp. N/A 'F. NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is nuntered and the number of sheets is recorded at the top of this form. I L_______.___________.________________.___._____..._________ _ _ . . . _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ . _ _ . _ _ _ _ _ _ _ _ _ _ _ _ _
W/O No. C0179933 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks None Applicaone Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed IL .
^ ^ - - J H. KRAMER . Enaineer Date July 13 .19 98 6 h oTO'wners Designee. Tiue CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H.S.B.I & l. Company of Hartford. CT _
in this Owners Report during the penod //.10/98 to have, 7/f A 9 the components. and desenbod state that to the best of my knowledge and belief, the Owner has perfofmed examinations and tden covfective measures described in this Owners Report in accordance with the requ'rements of the ASME Code, Sechon XI. By 6;gning this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector ret his employer shall be liab'ein any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
/
Cw,m; km. PA-2497 l.N & A inspectors Signature / Natonal Board, State. Province, and Endorsements Date 2819 9f$ I '~ (12/82) f i I I _ _ - _ _ _ _ _ _ - _ - - - - - 1
f. l I i i ! FORM N1S 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l j As Required by the Provisions of the ASME Code Section XI I
- 1. Owner PECO Eneroy Company Date July 10.1998 Name i
2301 Market Street. Philadelphia. PA 19101 Sheet of 2 1 l Address
)
- 2. Plant Limerick Generatino Station Unit 1 l Name P O Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0180446 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A l P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Hioh Pressure Coolant Iniection(System 055) Line No. DBB-103 HV-055-1F105
- 5. (a) Applicable Construction Code ASME Ill 19 71 Edition. Summer 1973 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repars or Repiamments 19 86 l 6. Identification of Components Repaired or Replaced and Replacement Components l
Repaired, ASME l Name of Name of Manufadurer National Other Year Built Reptamd, or Code Component Manufacturer Serial No. Board Mo. Identification Replacement Stamped (Yes or No) I l i I l l 7. Description of Work Added seal weld to existinn valve packino leakoff pluo
- 8. Tests conducted: Hydrostatic 0 Pneutnate O Norrunal Operatrig Pressure m Other_ Pressure 1120 osi Test Temp. N/A *F.
l NOTE: Supplernental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-I tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. I I I
l i I l W/O No. C0180446 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Leakoff plua was previously replaced via PECO Work Order C0163300 and reported on NIS-2 Code Data Report Apphcable Manufacturers Data Reports to be attached I
b CERTIFICATE OF COMPLIANCE We certify tf sat the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repasr or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiraton Date NA Signed b _ a - J H. KRAMER . Enoineer Date July 10 .19 98 gwner orDwnersbesignee, Trtie CERTIFICATE OF INSERVICE INSPECTION i I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H.S B I & l. Company of Hartford. CT have' the components desenbed in this Otyners Report during the penod 2/S/9A to 7 45 8 . and state that to the best of my knowledge and belief, the Owner has perfofme(examnatons and tak6n coffective rneasures described in this Ownofs Report in accordanm w% the requirements of the ASME Code, Sedon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions PA-24971.N & A inspectors Signature [ Nabonal Board, State, Province, and Endorsements Date' 7 19 M 1 (12/82)
l l i l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Seden XI
- 1. Owner PECO Enerav Comoany Date Jufv 13.1998 Name i- 2 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Urnerick Generatina Station Unit 1 Name P O. Box 2300, Sanatoos PA 19464-2300 Work Order No. R0532790 Address Repair Organgaton P.O. No., Job No. etc.
' 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authortzaten No. N/A P O. Box 2300. Senatoca. PA 19464-2300 Exprabon Date N/A Address l
- 4. Identification of System Hiah Pressure Coolant iniection (System 055) Line No. EBB-129 055-1F077 & 055-1F078
! 5. (a) Applicable Construction Code ASME !!! 19 74 Edition, Winter 1974 . Addenda. N416-1 Code Case I (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Reptemd, or Code
. Component Manufacturer Serial No. Board No. Identflicaten Replacement Stamped 1 (Yes or No)
I l 055-1F077 EDWARD 60AGC N/A
- 114-98110 1994 REPLACEMENT YES 2' VALVE VALVES 055-1F078 EDWARD 61 AGC N/A
- 114-98110 1994 REPLACEMENT YES 2" VALVE VALVES EBB-129-E2 2* PIPE U.S. STEEL HEAT # N/A
- 114-90039 N/A REPLACEMENT NO PIECE #1 & 2 N87044 i
l
- Traceability per PECO Part Code Number. l
- 7. Description of Work Replaced 2" check valves and adiacent oice.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other , Pressure 1200 osi Test Ternp. N/A *F.
NOTE: Supplemental sheets in form of bats, sketches, or draunngs may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. R0532790 Sheet 2 of 2 FORM NIS-2 (SACK) i
- 9. Remarks Valves manufactured to ASME fil.1974 edition. Summer 1975 addenda.
l Applicable Manufacturers Data Reports to be attached Manufacturers Data Reports are traceable by PECO Work Order oscksoe. Vahre replacement completed in accordance with PECO Enoineerino Chance Reauest 97-02950 CERTIFICATE OF COMPUANCE We certify that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed . - J H KRAMER . Enoinder Date July 13 .19 98 ($wner or Dwners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersgned, holding a valid commission issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of Pennsvivania and employed by - H S B.1 & l. Company of Hartford. CT havy m' sp9cted the components descnbod in this Owners Report dunng the penod .2./MS/98 to 7/T4/76 . and state that to the best of my knowledge and belief, the Owner has perfomfed examinations and t6 ken c6rrective measures desenbod in this Owners Report in accordance with the requirements of the ASME Code. Sedion XI. By signing this certdicate neither the inspector nor his employer makes any warranty, expressed or implied, cxmcoming the examinations and corrective measures described in this Owrwrs Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspection. [ - Commissions PA-2497 f.N & A Inspectors Sgnature /' Natonal Board, State. Province, and Endorsements Date 7 b 1998 l l (12/82) I
I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner PECO Eneroy Comoany Date July 13.1998 Name 2301 Market Street Philadelphia. PA 19101 Sreet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P O. Box 2300. Sanatoca. PA 19464-2300 Work Order No. R0664156 Address Repair Organization P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Comoany Type Cooe Symbol Stamp N/A Name Authorizaten No. N/A P.O. Box 2300. Sanatoaa PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System Hiah Pressure Coolant Iniection (System 055) Line No. EBB-129 & HBB-170 055-1048 & 055-1049
- 5. (a) Applicable Construction Code ASME fil 19 74 Edition, Winter 1974 Addenda, N-416-1 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Narne of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 055-1048 EDWARD 08 AKJ N/A *114-98110 1994 REPLACEMENT YES 1-1/2" VALVE VALVES 055-1049 EDWARD 07 AKJ N/A *114-98110 1994 REPLACEMENT YES 1-1/2" VALVE VALVES j
EBB-129-E7 1-1/2" PIPE QUANEX HEAT # N/A
- 114-90038 N/A REPLACEMENT NO PIECE # 24 458574 3
HBB170-E21 l 1-1/2* PIPE QUANEX HEAT # N/A
- 114-90044 N/A REPLACEMENT NO PIECE # 16 294072 HBB170-E21 HANGER H7 BERGEN PS-1010 N/A
- 114-92635 N/A REPLACEMENT NO AND H8 PATERSON
- Traceability per PECO Part Code Number.
- 7. Desenption of Work Reola d 1-1/2" check vatves. adiacent pipe and Dipe supports.
- 8. Tests conducted
- Hydrostatic 0 Pneumate O NominalOperating Pressure a Other. Pressure 1200 os! Test Ternp. N/A *F.
I NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is induded on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. i l i
1 1 1 W/O No. R0664156 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Valves manufactured to ASME 111.1974 edition. Summer 1975 addenda.
Apphcable Manufa<2urers Data Reports to be attached Pipe support rework completed in accordance with ANSI B31.1.1%9 edition with March 10.1971 addenda. Manufacturers Data Reports are traceable by PECO Work Order oscksoe. ' Valve replacement completed in accordance with PECO Enaineerina Chance Reauest 93-03395. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this reotacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed . J.H KRAMER . Enaineer Date July 13 .19 98 _ pr oiOwners Designee, Tltle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and empinyed by H.S B 1.81. Company of Hartford. CT have^ the components descnbed in this Owners Report durmg the period /2h7/97 to 7 fB 991 . and state that to the best of my knowledge and belief, the Owner has gferforthed examinations and tal6n corfectue measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbed in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection.
/ 4 Commssions PA-24971 N & A
" inspectors Signature [ Natonal Board, State, Province, and Endorsements Date ' M19 M (12/82) i 1
i l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sechon XI j
- 1. Owner PECO Eneroy Comoany Date July 141998 Name 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address l 2. Plant Umerd Generatino Station Unit i Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0545502 Address Repair Organization P.O. No., Job No. etc,
- 3. Work Performed by PECO Enemy Comoany Type Code Symbol Stamp N&
Name Authonzaton No. N/A P O Box 2300. Senatoaa. PA 19464-2300 Expiration Date N/A Address
- 4. Identification of System HPCI Pumo & Turbine (System 056) Line No. HBB-113 PSE-056-10003 l
S. (a) Applicable Construction Code ASME 111 19 86 Edition. Wmter1987 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME I Name of Name of Manufacturer National Other Year Built Replaced, or Code I Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 16" CONTINENTAL N/A
- 114-34521 1993 REPLACEMENT NO 235836 RUPTURE DISC DISC
- Traceability per PECO Part Code Number.
- 7. Description of Work Replaced HPCI turbine exhaust rupture disc.
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other. Pressure 1040 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and tre number of sheets is recorded at the top of this form. L ____ - _-_-_--_------ _ - - - - - - - - . - - _
W/O No. R0545502 Sheet 2 of 2 i FORM NIS-2 (BACK)
- 9. Renwrks None.
Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed . b - J H. KRAMER . Enoineer Date Jutv 14 .19 98
%ner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H.S B I & l. Cornoany of Hartford. CT .
havg insppcted the components desenbod in this Owners Report dunng the penod M /97 to 7/1.3/98 . and state that to the best of my knowledge and belief, the Owner has perf6rmdd examinations and tAen c6tredrve measures desenbed in this Owners Report in accordance with the requirerrents of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or imphed, concoming the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector not his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
//
- Commasons PA-24971.N & A inspectors Signature / Natonal Board, State, Province, and Endorsements Date /3 19 98 l (12/82) f s
l I i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI ) i l t l 1. Owner PECO Enerav Company Date Jutv 141998 i Name l 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit i Name P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. R0545504 Address Repair Organizaten P.O. No., Job No. etc. j
- 3. Work Performed by PECO Enerav Comoany Type Code Symbol Stamp N/A Name Authonzation No. N/A i P.O. Box 2300. Senatoaa. PA 19464-2300 Expiraton Date N/A j Address l
- 4. Identification of System HPCI Pumo & Turbine (System 056) Line No. HBB.113 PSE-056-1D004 l
- 5. (a) Applicable Construction Code ASME lil 19 86 Edition. Winter 1987 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Repiamments 1986
- 6. Identification of Components Repaired or Replaud and Replacement Components Repaired, ASME
!. Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) 16' CONTINENTAL N/A
- 114 34521 1994 REPLACEMENT NO RUPTURE 238698 DISC DISC l
l
- Traceability per PECO Part Code Number.
, ' 7. Description of Work Replaced HPCI turbine exhaust rupture disc j
- 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a j Other _ Pressure 1040 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. i I
W/O No. R0545504 Sheet 2 of 2 j FORM NIS-2 (BACK)
- 9. Remarks None.
Appiscable Manufacturer's Data Reports to be attached l i l CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this teolemment conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed [ m- N. J H KRAMER . Enaineer Date July 14
.19 &
6.kneP6r Owners Designee, Title l CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commassen issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l.& l. Company of Hartford. CT have the components descnbod in this Owners Report dunng the penod 9/N/97 to 7 23 2 . and state that to the best of my knowledge and belief, the Owner has ph examinations and ta(en cofrectue measures described in this Owners Report in accordana with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the Inspedor nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective rneasures described in this Owners Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Cw,.. ;u,,e ' PA-2497 f.N & A Inspectors Signature / National Board, State, Province, and Endorsements Date 281998 (12/82) l l
I l FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Section XI j
- 1. Owner PECO Eneroy Company Date July 15.1998 Name I 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Station Unit 1 Name P,0 Box 2300. Sanatoaa. PA 19464-2300 Work Order No C0181804 Address Repair Organuato1 P.O. No., Job No. etc.
- 3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Senatoaa. PA 19464-2300 Expiration Date N/A Address 4, identification of System Containment Atmosphere (System 057) Line No HBB-125 HV-057-131
- 5. (a) Applicable Construction Code ASME 111 19 80 Euition, Summer 1981 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utileed for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code l Component Manufacturer Serial No. Board No. Identification Replacement Stamped I
(Yes or No) HV-057-131 ATWOOD & 1 1033S.01 N/A *114-85914 1996 REPLACEMENT YES 6' FLANGED MORRILL VALVE l
' Traceability per PECO Part Code Number.
- 7. Description of Work Replaced 6" flanced butterfly valve
- 8. Tests conducted: Hydrostatic D Pneumate O NominalOperatuig Pressure O Other a Press. ire 46 osi Test Temp. N/A *F.
NOTE: Supplemental sheets in form of lists, sketches, or drawings rnay be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
l i l l f i i I I W/O No. C0181804 Sheet 2 of 2 FORM NIS-2 (BACK)
- 9. Remarks Manufacturers data report is traceable by DECO Work Order packsoe {
Applicable Manufadurers Data Reports to be attached Pressure testino satisfied by 10CFR50 Appendix J Local Leak Rate Test ST 4-LLR-572-1 per Relief Recuest RR-13-1.7. CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed . . _ J H. KRAMER . Enoineer Date July.15 .19 98 ($vner of%ners Designee, Title CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspedors and the State or Province of Pennsylvania and employed by H S B I & l. Company of Hartford. CT . have inspectpd the components desenbed in this Owners Report dunng the penod N/20/9E5 to ~7/2.7/98 . and state that to the best of my knowledge and belief, the Owner has pedormed examinations and tak6n corr 6ctwe measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed of irrpied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
### . ##/ Commissions PA-24971.N & A inspectors $gnature
[ National Board, State, Province, and Endorsements Date 7/231998 1 (12/82)
l 1 1 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI
- 1. Owner PECO Eneroy Company Date July 15.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address
- 2. Plant Limerick Generatina Statinn Unit 1 Name P O Box 2300 Sanatoas. PA 19464-2300 Work Order No. C0180375 Address Repair Organization P.O. No., Job No. etc.
1 ( 3. Work Performed by PECO Energy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O Box 2300. Senatoas. PA 19464-2300 Expiration Date N/A ) Address
- 4. Identification of System Primary Containment fSystem 060) Line No X-200A 5, (a) Applicable Construction Code ASME Ill 19 77 Edition. Winter 1978 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utdized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Senal National Other Year Built Replaced, or Code Component Manufacturer No. Board No. Identification Replacement Stamped (Yes or No) l
( 4 ) 5/8" NOVA HEATe 0-5473GH N/A *114-76935 N/A REPLACEMENT NO HEX NUTS MACHINE LOT # 33221000 1 I I l
- Traceability per PECO Part Code Number.
- 7. Desenption of Work Rentaced ( 4 ) 5/8" her nuts on suppression pool hatch l
l 8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure D i Other a Pressure 45 psi Test Temp. N/A *F. NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 h, (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
W/O No. C0180375 Sheet 2 of 2 i l FORM NIS-2 (BACK)
- 9. Remarks Pressure testino satisfied by 10CFR50 Appendix J Local Leak Rate Test ST-4-LLR-801-1 via PECO Work Order R0754495.
Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPUANCE We cerbfy that the statements made in the report are corted and this replacernent conforms to the rules of the ASME Code, Section XL repar or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed . J H KRAMER . Enaineer Date July. 15 .19 98 QRrner or tfwners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H.S.B l.& I. Cornoeny of Hartfet. CT have inppeded the components described in this Owners Report dunng the period 2/2_/98 to 7/23/955 .and state that to the best of my knowledge and belief, the Owner has p6rforrhed examinations and take6 corredbve measures-described in this Owners Report ln accordance with the requirements of the ASME Code, Sechon XI. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corredive measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions PA-2497 l.N & A inspedora Signature / Natenal Board, State, Province, and Endorsements Date 7/23 19 98
/ q (12/82) 1
. . . . . .\}}