ML20211E989

LGS Unit 2 Summary Rept for 970228 to 990525 Periodic ISI Rept Number 5

ML20211E989
Person / Time
Site:	Limerick
Issue date:	08/20/1999
From:	PECO ENERGY CO., (FORMERLY PHILADELPHIA ELECTRIC
To:
Shared Package
ML20211E977	List: ML20211E973 ML20211E989
References
NUDOCS 9908300192
Download: ML20211E989 (158)

Text

. -_

LIMERICK GENERATING STATION UNIT 2

SUMMARY

REPORT FOR THE FEBRUARY 28,1997 TO MAY 25,1999 PERIODIC IN-SERVICE INSPECTION REPORT No. 5

+,.. . . ,

c TABLE OF CONTENTS .

Pages Form NIS-1 Owner's Report for Inservice inspections 2 Introduction Examination Period and Requirements 1 Section 1 Summary of inservice inspections 67 Results Prior to and During Unit 2, 5* Refuel Cycle Section 2 Summary of Reportable Conditions 1 Observed During inservice Inspection Section 3 Summary of ASME XI Repairs and 3 Replacements Form NIS-2 Owner's Report for Repairs and Replacements 78 l

l l

l 1

l l

1 NIS1 2R05 Sheet 1 of 2 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules 1, Owner PECO Enerav Company 2301 Market Street. Philadelphia PA 19101 (Name and Address of Owner)

2. Plant timenck Generatina Station P O Box 2300. Sanatoca. PA 19464-2300 (Name and Address of Plant)

3. Plant Unit 2 4. Owner Certificate of Authonzation (if required) N/A

5. Commercial Service Date January 8.1990 6. National Board Number for Unit 3960

7. Components inspected Manufacturer Component or Manufacturer or installer State or National Appurtenance or installer Senal No. Province No. Board No.

Nuclear Reactor Vessel Chicago Bridge & tron Co. B-5027 B116768 3960 Class 1,2, & 3 Piping Systems

& Suppons

• Traceability per Form N-5 Data Report, Design Specification and Line Number. .

Note: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,

(2) information in items 1 through 6 on this repor* is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

I NIS1 2R05 Sheet 2 of 2 FORM NIS-1 .

8. Examination Dates February 28.1997 to May 25,1999 9. Inspection intervalfrom January 8.1990 to January 8. 2000

10. Applicable Editions of Section XI 1986 Addenda 'N/A

11. Abstract of Examinations. Include a list of examinations and a statement conceming status of work reouired for current intervat.

SEE: Section 1, Summary of inservice inspection Results

12. Abstract of Conditions Noted.

SEE: Section 2, Summary of Reportable Conditions Observed ,

i 13 Abstract of Corrective Measures Recommended and Taken.

SEE: Section 3, Summary of ASME Section XI Repairs and Replacements We certify that the statements made in this report are correct and the examinations and corrective measures taken je conform to the rules of the ASME Code,Section XI.

1 Certification of Authonzation No. (if applicable) N/A Expiration Date N/A

/ , .-

Date Auoust M 19 99 Signed PECO Enerav Company By ' -

Owner CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B 1 & I Company of Hartford Connecticut have inspected the components desenbed in this Owners Report dunng the penod February 28.1997 to May 25.1999 . and state that to the best of my knowledge and belet, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XL By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a Icss of any kind ansing fro nnected with this inspection.

Commissions PA 2497 I N&A Inspectors Signatur/ National Board, State, Province, and Endorsements Date 8! @ 19 99

/

O l

INTRODUCTION .

During the period from February 28,1997 through May 25,1999, inservice inspections were performed at Limerick Generating Station Unit 2. Unit 2 was shutdown for a scheduled refuel outage during the period April 16* through May 25,1999. The inspections performed during this period were credited towards the third period of the first ten year inspection interval.

Examinations completed during this period were performed by PECO Energy Company and General Electric Company in accordance with the requirements of ASME Section XI,1986 Edition.

In addition to ASME Section XI, other examinations were performed to meet numerous augmented inspection requirements. The authorized inspector performed a review of these inspections with the exception of the supplemental ultrasonic examination of reactor vessel jet ,

pump hold down beams. The augmented inspection requirements are as follows:

Generic Letter 88-01 Intergranular Stress Corrosion Cracking NUREG-0619 BWR Feedwater Nozzle Cracking 1.E. Bulletin 80-13 Cracking in Core Spray Spargers NUREG/CR-3052 Jet Pump Assembly Failure NUREG-0800 No Break Boundaries SIL 455 ISI of Alloy 182 nozzle Weldments  ;

i FSAR Table 3.21 Non-Q RPV Internal Components SIL 409 incore Dry Tube Cracks SIL 420 Inspection of Jet Pump Sensing Lines BWRVIP-18 Core Spray Internals inspection and Flaw Evaluation Guidelines BWRVIP-38 Shroud Support inspcction and Flaw Evaluation Guidelines BWRVIP-41 Jet Pump Assembly inspection and Flaw Evaluation Guidelines .

i l

l

i l

1 l

l l

i l SECTION 1 -

l l 1 I

l l

l i*

l l

SUMMARY

OF IN-SERVICE INSPECTION RESULTS PRIOR TO AND DURING 5 REFUEL OUTAGE

! LIMERICK GENERATING STATION UNIT 2 1

FEBRUARY 28,1997 TO MAY 25,1999 l

l l

1 l

[

DATE: LIMERICK GENERATING STATION PAGE,o REVISOR ( INSERVICE INSPECTION

SUMMARY

SECOND INTERVAL, FIRST PERIOD, FIRST OUTAGE (1998) ~[

REACTOR PRESSUREVESSEL 2 3 4 6 NR R $

ASME 5 s oEaE SEC.XI T RCEP 5AdMARY EXAMINATIONAREA CATGY EXAM A E O O O REMARKS NLAABER DENTIFICATION ITEM NO lETHOD PROCEDURE T C R MR

_ _ . . . . . "CAUBRATION BLOCK "

SUMMARY

OF EXAMINAT!ON LEGEND ,

1. Identification of system.

2. Component identification and description.

3. ASME Section XI Category and item Number applicable to the component. If there is an augmentec reouirement to perform an examination, then "N/A" will appear in this location.

4. Exam method (NDE) applicable to the component.

5. N.DE procedure used to perform the examination on the component.

6. Exam Status:

a) C= Completed b) U= Unscheduled Complete c) P= Preservice Complete d) A= Augmented Complete e) E= Expanded Scope Complete i

7. Examination results broken down into 5 categories described below:

a) NOREC = No recordableIndications detected .

b) RECOR = Recordable indications detected c) GEOM = Geometricindications detoded d) REPOR = Repodable indications which require corrective action to maintain structural adequacy

8. Remarts field which contains specific informatior' conceming the component examination or evaluation of examination results.

]

DATE: 08/20/99 LIMERICK CENERATING STATION UNIT 2 . PAGE: 1 REVISION: 0 INSERVICE INSPECTION SIM4ARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONE! TIS NR R ASME OEGE SEC. XI RCEP StL91ARY EXAMINATION AREA CATGY EXAM EOOO trJMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR R&MARFJ CS IREF. DWG NO. XI-DLA-210-1'

, 025800 HV 52-208 (BOLTING) VT-1 MAG-CG-407 R5 X- .-

12' A.O. CHECK VALVE B-G-2 (BOLTING) B7.70 14 /297 /593 / 0 CS (REF. DWG. NO. XI-2P-206) 029000 2BP-206 SWA PT MAG-CG-402 R4 X... (C0186153)

SUOTION NOZZLE TO FLANGE WELD C.G 14 /177 /181 / 0 C6.10 029500 2BP.206 SWC-2-5 MT MT-LIM-001V1 R2 X.-. (C0186153)

DISCHARGE ELBOW TO HEAD FLANGE C-G WELD C6.10 14 /177 /181 / 0 029600 2BP-206 SWN-1 5 MT MT-LIM-001V1 R2 X.+. (00186153)

DISCHARGE ELBOW TO STUFFING C.G BOX WELD C6.10 14 /177 /181 / tr 029700 2BP.206 SWC-1 5 MT MT-LIM-001V1 R2 X--- MT EXAM LIMITED TO 50% C00E COVERA 0E, i DISCHARGE ELBOW TO FLANGE WELD C-G PT LP. LIM.001V3 R1 X... SOPFLEMENTED BY PT EXAM TO A"HIEVE 100%

14 /177 /181 / 0 C6.10 CODE COVERACE (C0186153) 029800 2BP.206 SWN-2-5 MT IC-LIM-001V1 R2 X--. (C0186153)

STUFFING BOX ATTACHMENT WELD C-G i 1

14 /177 /181 / 0 C6.10  ;

I I

030000 2BP-206 FC-1-1 VT 3 MAG-CG-407 R6 X... (C0186153)

FINAL MECHANICAL CONN HOLD FA DOWN FLG (INCLUDES 10 BOLTS) F1,40 14 /177 /181 / 0 L

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . FAGE: 2 REVISICN 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD FERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR EEMARKS CS fREF. DW3. NO. XI-EPP-232-1) 035300 EBB-232 1 FW2 MT MT-LIM-001V1 R2 X-.- BASELINE INSFECTICN, (C0184014) 12* PIPE TO VALVE NV-52-2F005 C-F-2 UT-OL Ifr-LIM-106VD R0 X..-

13 /297 /593 / 0 C5.51 Li-45S L7-LIM 106VD R0 X--.

CS 'FFF. DWG. NO. XI-CPP-212-16 035600 GBB-212-1 FW8A MT MT-LIM-001V1 R2 X-.- LIMITED EXAM DUE TO HANGER CIAMP LUG GBB-212 1 6 TO 12" PIPE C-C SATISFIED BY RR-05, REV81 (C0184872)

(H14) C3.20 14 /183 /181 / 0 035700 GBB.212 1 FW8B MT MT-LIM-001V1 R2 X.-. LIMITED EXAM DUE TO RANGER CLAMP LUG GBB-212-1 7 TO 12' PIPE C-C SATISFIED BY RR 05, REV#1 (C0184872)

(H14) C3.20 14 /183 /181 / 0 035800 GBB-212-1 FW80 MT MT 1.IM-001V1 R2 X... LIMITED EXAM DUE TO HANGER C' A MP LUG GBB-212 1 8 TO 12' PIPE C-C SATISFIED BY RR 05, REV#1 (C0184872)

(H14) C3.20 14 /183 /181 / 0 035900 GBB.212 1 FWBD MT HT-LIM-001VI R2 X.. . LIMITED EXAM DUE TO HANGER CLAMP LUG GEB-212-1 9 TO 12* PIPE C-C SATISFIED BY RR-05, REV#1 (00184872)

(H14) C3.20 l 14 /183 /181 / 0 .

036000 GBB-212-1 FW8E VT-1 MA3-CG-407 R6 X.. . LUG WELD IS INACCESSIBLE FOR SUP. FACE L"G GEB-212-1-10 TO 12" PIFE C.C PREPARATION AND EXAMINATION DUE TO (H14) C3.20 BUILDING STRUCTURE CONSTRAINTS. A VT-1 14 /183 /181 / 0 OF ACCESSIBLE SURFACE WAS PERFOP}tED TO SATISFY RR-05, REV#1. (C0184 872) 036100 GBB.212-1 FW8F VT-1 MAG-CG-4 07 R6 X. .- LU3 WELD IS INACCESSIBLE FOR SURFACE LUG GBB-212 1 11 TO 12' PIPE C-C PREPARATION AND EXAMINATION DUE TO (H14) C3.20 BUILDING STRUCI"JRE CONSTRAINTS. A VT-1 14 /183 /181 / 0 OF ACCESSIBLE SURFACE WAS PERFORMED TO SATISFY RR-05, REV81. (C0184872)

_ _J

i j 1 \

I DaTE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 3 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD FERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS UR R ME CEGE SEC. XI RCEP SUfEARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS CS 'RFF. DWG NO. XI-CBB-212-Il

,036200 GBB-212-1 FW8G VT-1 MA3 CG-407 R6 X- -. LUG WELD IS INACCESSIBLE FOR SURFACE LUG CBS 212-1-12 TO 12" PIPE C-C PREFARATION AND EXAMINATION DUE TO (H14) C3.20 BUILDING STRUCTURE CONSTRAINTS. A VT 1 14 /183 /181 / 0 CF ACCESSIBLE SURFACE WAS PERFORMED TO SATISFY RR 05. REV41. (C0184872) t 036300 CBB-212 1 FW8H VT-1 MAG-CG-407 R6 X--- LUG WELD IS INACCESSIBLE FOR SURFACE LUG GBB-212 1-13 TO 12" PIPE C-C FREPARATION AND EXAMINATION DUE TO (H14) C3.20 BUILDING STRUCTURE OBSTRCUCTION, A VT-1 14 /183 /181 / 0 CF ACCESSIBLE SURFACES WAS PERFORED l TOSATISFY RR-05, REV#5. (C0184872) 037900 GBB-212 H14 VT-3 MAG-CG-407 R6 X--- (C0184872) l RIGID SUPPORT F-A 14 /183 /181 / 0 F1.20 i

i CS (FEF, DWG. MO, XI-CBB-212-3) 001300 GBB-212-3 FW12A MT MT-LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CLAMP LU3 GBB-212-3-10 TD 14" PIPE C-C SATISFIED BY RR-05, REV#1 (C0183973)

(H37) C3.20 f 14 /283 /580 / 0 l*

I 041400 GBB-212-3 FW12B pff MT-LIM-001V1 R2 X- .. LIMITED EXAM DUE TO HANGER CLAMP j* LUG GBB-212-3-11 70 14" PIPE C-C SATISFIED BY RR-05, REV81 (C0183973) i (H37) C3.20 14 /283 /580 / 0 041500 GBB-212-3 FW12C MT MT-LIM-001V1 R2 X--. LIMITED EXAM DUE TO HANGER CLAMP LUG GBB-212-3 13 TO 14" PIPE C-C SATISFIED BY RR-05, REV81 (CD183973)

(H37) C3.20 14 /283 /580 / 0 1

l l

DATE: 08/20/99 LIMERICX CENERATING STATION UNIT 2 . FAGE: 4 REVISIONt 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPChTNTS NR R i ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS CS fREF. DWG NO. XI-CPB-212-31 041600 GBB-212 3 FW12D KT MT-LIM-001V1 R2 X-- . LIMITED EXAM DUE TO HANGER CLAMP LUG CBB-212-3-12 TO 14" PIPE C-C SATISFIED BY RR-05, REV#1 (C0183973)

(H37) C3.20 14 /283 /580 / 0 1

046300 GBB 212 H37 VT-3 MAG-CG-407 R6 X--. (C0183973)

VARIABLE SUPPORT F-A 14 /283 /580 / 0 F1.20 C? f 9 EF . DW1 NO. XI-MPP-210-2) 064300 HBB-220-2 2 SW5 MT MT-LIM-001VI R2 X... BASELINE INSPECTION, (C0184891) 16"x16"x14' RED TEE TO ELBOW C-F.2 W- OL UT-LIM-106VO R0 X- -.

14 /180 /181 / 0 C5.51 UT-458 UT-LIM-106VC RD .-X.

0647C0 HBB-220-2 3 SW2 MT MT-LIM-001V1 R2 X..* BASELINE INSPECTION, (C0184891) 16* EI, BOW TO PIFE C-F.2 UI OL UT-LIM-106VD R0 X ..

14 /175 /181 / 0 C5.51 UT-45S Ur-LIM-106VD R0 ..X.

060800 KBB 220-2-3 SW3 MT MT-LIM-001VI R2 X... BASELINE INSPECTION, (C0184091) j 16" PIPE TO FLANGE C-F.2 UT-OL UT-LIM-106VD RD X-.. j 14 /175 /181 / 0 C5.51 UT-455 UT-LIM 106VD R0 ..X. I l

C? f 9FF DW3. NO. XI-MPB-225-4) .

l 072420 KBB 220 H37 VT-3 MAG-CG-407 R6 X..- BASELINE INSPECTION CF RIGID RESTRAINT RIGID RESTRAINT N/A+ ADDED AS A RESULT CF SUCTION STRAIN'ER 172 /177 / / N/A MOD # P002BS-2. (C0182927) 072440 KBB-220 H38 VT-3 MAG-CG-4 07 R6 X-.. BASELINE INSPECTION OF RIGID RESTRAINT RIGID RESTRAINT N/A. ADDED AS A RESULT OF SUCTION STRAIhTR 172 /177 / / N/A MOD # P00285 2. (CC182929) l

I r

l DATEt 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 5 4 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT l

l FIRST IlfrERVAL, THIRD PERIOD, SECOND OUTA3E (99RF) l C %SS 2 CAUEP STATUS COMPONENTS t

NR R l ME OEGE SEC XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO

' NUMBER IDENTIFICATION ITEM NO ME. HOD PROCEDL1tE CkMR REMARKS ie CS (FEF, DWG. NO Xf-HPB-226-41

,072460 HBB-220 H39 VT-3 MAG-CG-407 R6 X- -

BASELINE INSPECTION OF RIGID RESTRAINT RIGID RESTRAINT N/A+ ADDED AS A RESULT CF SUCTION STRAINER 172 /177 / / N/A MOD # P00285-2. (C01829301 072480 HBB-220 H40 VT-3 MAG-CG-4 07 R6 X-+- BASELIKE INSPECTION OF RIGID RESTRAINT RIGID RESTRAINT N/A+ ADOED AS A RESULT OF SUCTION STRAINER 172 /177 / / N/A MOD 8 P00285 2. (C0182931)

FW f9EP. DW3. NO. XI-DLA-207-11 105700 DLA-2071 FW2 MT KT-LIM-001V1 R2 X--- (C0183600) 24'x24 *x12" RED. TEE TO 12' B-J UT-45S UT-LIM-106VD RO --X-PIPE B9.11 14C /288 /473 / 40 106000 DLA-207 1 FWG MT MT. LIM-001V1 R2 X- +- tC0193609) 20*x20*x12" RED. TEE TO 12' B-J UT-OL UT. LIM-106VD RD X-..

PIPE B9.11 UT-45S UT-LIM.106VD R0 X-- -

14C /289 /473 / 90 1

106800 DLA-207 1 FW16 MT KT-LIM-001V1 R2 X+-- (C0183629) )

, 24" PIPE TO 4" SWEEPOLET B-J UT-45S UT-LIM-106VD RC X-+-

14C /287 /473 / 12 B9.31 1 1071C0 DLA-207-1-1 SW3 MT MT. LIM-001vi R2 X--- (C0183600) 24 *x24 *x12" TEE TO 24 *x2 C" B-J UT-45S UT-LIM-106v0 R0 X-..

REDUCER B9.11 14C /287 /473 / 40 107500 DLA-207-1-3 SW1 MT MT. LIM-001V1 Ri X-.- (C0193600) 12" PIPE TO E* BOW B-J UT-455 UT-LIM-106VD R0 X---

14C /289 /473 / 40 B9.11 I

l

LIMERICK GENERATING STATION UNIT 2 PAGE: 6 DATE: 08/20/99 .

REVISION: 0 INSERVICE INSPECTION SUMI%RY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUT.Y.iE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUtHARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDL%E CRMR REMRRVJi FW iPEF. DWG NO. XI-DBB-203-1) 120500 DBB-203-1 FW5 UT.45S UT-LIM.106VD R0 X--. EXAMINED FER AUG-05, NRC TECHNICAL 24" PIPE TO Sax 24' WELDOLET N/A+ POSITION MEB 3-1 (NUREG 0800, 'NO BREAK" 25 /287 /587 / 0 N/A BOUNDARIES). (C0184 023)

FW (RFF. DWG. N1 XI-DBB-203-2) 122000 DBB.203 2 FW3 UT.458 UT. LIM.106VO R0 -X. EXAMINED PER AUG-05, NRC TECHNICAL VALVE $5-2058 TO 8" PIPE N/A+ POSITION MEB 3 1 (NUREG-0800, 'NO BREAK" 25 /295 /587 / 0 N/A BOUNDARIES). (C0184023) 122200 DBB.203 2 FW4 UT-45S UT-LIM-106VO R0 X..- EXAMINED PER AUG-05, NRC TECHNICAL B" PIPE TO ELBOW N/A+ POSITION MEB 3 1 (NUREG-0800, *NO BREAK' 25 /295 /587 / 0 N/A BOUNDARIES). (C0184023) 122000 DEB.203-2 FW5 UI-458 Ur-LIM-106VD R0 --X- EXAMINED PER AUG-05, NRC TECHNICAL 8* ELBOW TO PIPE N/A+ POSITION MEB 3-1 (NOREG-0800, *NO PREAK' 25 /294 /587 / 0 N/A BOUNDARIES). (C0184023) 122500 DBB-203 2 FW6 MT MT-LIM-001VI R2 X--- (C0184023) 8" PIPE TO 45 degree ELBOW C-F-2+ UT.45S UT. LIM-106VD RC X-.-

25 /291 /587 / 0 C5.51

+

122600 DBB.203 2 FW6 UT-45S UT-LIM-106VD R0 X.-- EXAMINED PER AUG-05, NRC TECHNICAL 8" PIPE TO 45 degree ELBOW N/A+ POSITION MEB 3-1 (NURE3-0800, "NO BREAK' .

25 /291 /587 / 0 N/A BOUNDARIES). (C0184032) 122800 OBB-203-2 FW7 VT-4 5S UT. LIM-106VD RD X-- - EXAMINEC PER AUG-05, NRC TECHNICAL 8*.45 degree ELBOW TO 45 N/A+ PCSITION MEB 3-1 (NUREG-0800, *NO BREAK" degree ELBOW N/A BOUNDARIES). (CD184032) 25 /290 /587 / 0 123000 DBB-203 2 FW8 UT.45S UT-LIM-106VD R0 X-.. EXAMINED PER AUG-05, NRC TECHNICAL 8".45 DEGREE ELBOW TO PIPE N/A+ POSITION MEB 3-1 (NURE3 0800, 'NO BREAK" 25 /289 /587 / 0 N/A BOUNDARIES). (C0184023) k

V DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 7 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ME OEGE 1

SEC. XI RCEP l

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO l NUMBER IDENTIFICATION ITEM NO METHOD PRO 3 DURE CRMR REMARKS 1

le FW (REF. DWG. NO. XI-DFB-203-2) in-4 5 S UT-LIM-106VD R0 X--- EXAMINED PER AUG-05, NRC TEC10!ICAL i*123200 DBB-203-2 FW10

\

l 8" PIPE TO 8'X 24" WELDOLET N/A+ POSITION MEB 3-1 (NUREG-0800, 'NO BREAK" 25 /288 /587 / 0 N/A BOUNDARIES), 100184023)

HPCI 'REF. DWG. NO. XI-EEB-229-1)

, 143500 EBB.229-1 FW13A MT MT. LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CIAMP LUG EBB 229-1 11 TO 14" PIPE C-C SATISFIED BY RR-05, REV#1 (C0184862) l (H15) C3.20 14 /195 /181 / 0 143600 EBB-229-1 FW13B MT MT-LIM-0CIV1 R2 X--- LIMITED EXAM DUE TO HANGER CIAMP LUG EBB-229 1 12 TO 14" PIPE C.C SATISFIED BY RR-05, REV#1 (C0184862)

(H15) C3.20 14 /195 /181 / 0 143700 EBB-229-1 FW13C MT MT-LIM.0C1V1 R2 X- -

LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-229-1-13 TO 14' PIPE C-C SATISFIED BY RR-05, REV#1 (C0184862)

(H15) C3.20 14 /195 /181 / D l

, ,143800 EBB-229-1 FW13D MT Mh LIM-001V1 R2 X* -- LIMITED EXAM DUE TO HANGER CIAMP LUG EBB-229-1-14 TO 14' PIPE C-C SATISFIED BY RR-05, P4V#1 (C0184868)

(R15) C3.20 14 /195 /181 / 0 143900 EBB-229-1 FW14 A MT MT-LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-229-1-15 TO 14' PIPE C-C SATISFIED BY RR-05, REVW1 (00184868)

(H40) C3.20 14 /190 /181 / 0 144000 EBB-229-1 FW14B MT MT-LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-229-1 17 TO 14* PIPE C.C SATISFIED BY RR 05, REV#1 (C0184868)

(H40) C3.20 14 /190 /181 / 0 a

I i

l

1 I

I DATE: 08/20/99 LIMERICX GENERATING STATION UNIT 2 . PAGE: 8 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE i SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO 58 UMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS HPCI (REF. DWG. NO. XI-EBB-229 1) 144100 EBB-229-1 FW14C MT MT. LIM.001V1 R2 X- . . LIMITED EXAM DUE TO fiANGER C' .AMP LUG EBB-229-1 19 TO 14* PIPE C.C SATISFIED BY RR-05, REV#1 (C0184868)

(H40) C3.20 14 /190 /181 / 0 146200 EBB.229-1 FW14D MT MT. LIM 001VI R2 X- . . LIMITED EXAM DUE TO HANGER CLAMP LUG EBB.229-1 21 TO 14" PIPE C-C SATISFIED BY RR-05, REV#1 (CC184868)

(H40) C3.20 14 /190 /161 / 0 144300 EBB.229 1 FW15A MT MT. LIM.001VI R2 X. .. LIMITED EXAM DUE TO HANGER CLAMP LUG EBB.229 1 16 TO 14' PIPE C-C SATISFIED BY RR-05, REV#1 (C0184868)

(H40) C3.20 14 /190 /181 / 0 140400 EBB-229 1 FWISS E MT. LIM 001V1 R2 X- - . LIMITED EXAM DUE TO HANGER CLAMP LUG EBB.229-1 18 TO 14" PIPE C-C SATISFIED BY RR.05, REV#1 (C0184868)

(H40) C3.20 14 /190 /181 / 0 144500 EBB-229 1 FW15C MT Mr. LIM.001V1 R2 X. - LIMITED EXAM DUE TO HANGER CLAMP LUG EBB.229-1 20 TO 14" PIPE C-C SATISFIED BY RR.05, REV#1 (C0184868)

(H40) C3.20 j 14 /190 /181 / 0 I

144600 EBB.229 1 FW15D MT MT. LIM-001V1 R2 X... LIMITED EXAM DUE TO HANGER CLAMP Lit 3 EBB.229 1 22 TO 14" PIPE C-C SATISFIED BY RR.05, REV#1 (C0184868)

(H40) C3.20 14 /190 /181 / 0 147600 EBB.229 H40 VT-3 MAG-CG.407 R6 X-.. (C0184868)

RIGID SUPPORT F.A 14 /190 /181 / D F1.20

r- ,

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: S REVISION: O INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PELIOD, SECOND OUTAGE (99RF)

CLASS 2 CAL'EP ETATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CAT 3Y EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS

!e HPCI fREF DWG, NO. XI-ERB-229-1)

e 148300 EBB-229 H15 VT-3 MAG-CG-407 R6 X--- (C0184862)

VARIABLE SUPPORT F-A 14 /195 /181 / O F1.20 HPCI (REF. DWG. ND. XI-EPP-229-31 158900 EBB-229-3 FW20 MT MT-LIM-001V1 R2 X-+- BASELINE INSPECTION, (C0183990) 8" PIPE TO ELBOW C F-2 UT-OL LT-LIM-106VD R0 X- . .

14 /299 /580 / 0 C5.51 UT-45S W-LIM-106VD R0 X---

HPCI fREF DWO NO. XI-MPP-209-15 167300 HBB.209-1-4 SW2 MT MT-LIM 001VI R2 X- - - BASE

• INE INSPECTION, IC0186131) 16' PIFE TO ELBOW C-F-2 W- OL UT-LIM-106VO R0 X...

18 /187 /180 / 0 C5.51 UT-455 UT-LIM-106VD RD X--.

l 167400 MBB-209 1-4 SW3 MT MT-LIM-001V1 R2 X--- BASELINE INSPECTION, (C0186131) 16" ELBOW TO PIPE C-F.2 UT-0L UT-LIM-106VO R0 X..-

i 10 /187 /100 / 0 C5.51 UT.4ES UT-LIM-106VD R0 .-X-1 l

i

?.S1S 171250 HED-273 H4 V"'- 3 MAG-CG-407 R6 X.-- BASELINE INSPECTION OF RIGID RESTRAINT RIGID RESTRAINT N/A+ ACDED AS A RESULT OF SUCTION STRAINER i

172 /177 / / N/A MOD 8 P00245-2, (C0185139)

I.

1 l

l MS (PEF. rWO. NO, XI- APE-2MS-1.Al l

173500 PSV.41-2F013A (INT. SURF,) VT-3 MAG-CG-407 R6 X--- EXAMINED ACCESSIBLE PORTICNS OF REPLACED 6" X 10' RELIEF VALVE B-M-2 VALVE BODY AND ITS ASSEMBLY TO NEW ,

1 (INTERNAL SURFACES) B12.50 PILOT. (R0724250) j 14C /291 /473 / 72

\,

4 r

4

LIMERICK GENERATING STATION UNIT 2 PAGE: 10 DATES 08/20/99 .

REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT I FIRST INTERV11, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPOhTNTS NR R ME CEGE j SEC. XI RCEP SUPNARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REVARKS MF ' PEF.'DWG NO XT-APE-2MS-IM 173700 PSV-41 2F013E (INT. SURF.) VT-3 MAG-CG.407 E6 X- -. EXAMINED ACCESSIBLE PORTIONS OF REPIACED 6' X 10" RELIEF VALVE B-M-2 VALVE BODY AND ITS ASSEMBLY TO NEW (INTERN E SURFACES) 212.50 PILOT. (R0728131) 14C /291 /473 / 72 173800 PSV.42 2F013J (INT. SURF.) VT-3 MAG-CG-407 R6 X+ .. EXAMINED ACCESSIBLE PORTIONS OF REPLACED 6" X 10" RELIEF VALVE B-M-2 VALVE BODY AND ITS ASSEMBLY TO NEW (INTERNAL SURFACES) B12.50 FILOT. (R0728102) 14C /280 /473 / 72 MS rygg. pw3, 30. XI. APE-2MS-LP' 179600 PSV-41-2F013B (INT. SURF.) VT-3 MA3.CG-407 R6 X-.. EXAMINED ACCESSIBLE PORTIONS CF REPIACED 6 " X 10 a RELIEF VALVE B-M-2 VALVE BODY AND ITS ASSEMBLY TO NEW (INTERNAL SURFACES) B12.50 PILOT. (R0724263) 18C /291 /473 /108 179700 PSV-41-2F013F (INT. SURF. ) VT-3 MAG-CG-407 R6 X..- EXAMINED ACCESSIELE PORTIONS OF REPIACED 6' X 10' RELIEF VALVE B-M 2 VALVE BODY AND ITS ASSEMBLY TO hTW (INTERNAL SURFACES) B12.50 PILOT. (R0728010) 18C /291 /473 /108 179800 PSV.41 2F013K (INT. SURF.) VT-3 MAG-CG-407 R6 X... EXAMINED ACCESSIBLE PORTIONS OF REPLACED 6" X 10' RELIEF VALVE B-M-2 VEVE BODY AND ITS ASSEMELY TO NEW (INTERNE SURFACES) B12.50 PILOT. (R0726470) .

18C /281 /473 /108 179900 PSV-41-2F013N (INT. SURF.) VT-3 MAG.CG-407 R6 X-.. EXAMINED ACCESSIBLE PORTIONS OF REPLACED 6" X 10" RELIEF VALVE B-M-2 VALVE BODY AND ITS ASSEMBLY TO NEW (INTERNAL SORFACES) B12.50 PILCT. (R0724266)

IBC /281 /473 /108 MS (REF. DWO. NO. XI-APE-2MS-LC?

184600 APE 2MS-LC.B SWN MT MT-LIM-001V1 R2 X... LIMITED EXAM DUE TO HANGER CLAMP 1 1/2'z2*x2 1/2* LUG TO 26" B-K-1 SATISFIED BY RR-05, REV41 (C0183548)

PIPE (HC1) B10.10

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 11 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SFCOND OUTAGE (99EF)

CLASS 1 CAUTP STATUS COMPONEN1"S NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EKAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARFJ e

MS (REF. DWG NO Xf-APE 2MS-LC)

,184700 APE-2MS-LC-8 SWP MT MT-LIM-001VI R2 X--- LIMITED EXAM DUE TO HANGER CLAMP 2 1/2*x2*x2 1/2" LUG TO 26" B K-1 SATISFIED BY RR-C5, REV81 (00183548)

PIPE (HC1) B10.10 17C /300 /473 /252 184800 APE-2MS-LC-8 SW3 MT MT-LIM.001V1 R2 X--. LIMITED EXAM DUE TO HANGER CLAMP 2 1/2"x2*x2 1/2* LUG TO 26" B-K-1 SATISTIEL BY RR-05, REV81 (C0183548)

PIPE (HC1) B10.10 11C /300 /473 /252 184900 APE-2MS-LC-8 SWR MT MT-LIM-001V1 R2 X.-- LIMITED EXAM DUE TO HANGER CLAP.P 2 1/2*x2*x2 1/2" LU3 TO 26' B-K-1 SATISFIED BY RR-05, REV81 (C0183548)

PIPE (HC1) B10.10 17C /252 /473 /252 185300 APE-2MS LC-6 SWF (BOLTINGl VT-1 MAG-CG.407 R6 X-.- (CC183596)

FIANGE BOLTING AT APE-2MS LC-8 B-G-2 SWF B7.50 17C /291 /473 /252 185500 APE-2MS-LC-8 SWC (BOLTING) VT 1 MAG CG-407 E6 X--- (C0183596)

, FLANGE BOLTING AT APE-2MS-LC-8 B-G-2 SWC B7.50 17C /252 /473 /252 185700 APE-2MS-LC-8 SWM (BOLTING) VT-1 MAG-CG-407 R6 X--- (C0183646)

FLANGE BOLTING AT APE-2MS-LC-8 B-G-2 SWM B7.50 17C /281 /473 /252 185800 APE-2MS-LC 9 SWO (BOLTING) VT-1 VA3-CG-407 R6 X--- (C0183749)

FLANGE BOLTING AT APE-2MS-LC-9 B-G-2 SWD B7.50 13C /274 /473 /270 I

I l~

1 LIMERICX GENERATING STATION UNIT 2 FA0E 12 DATE: C8/20/99 .

REVISION: 0 INSERVICE INSPECTION SUF94ARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC, XI RCEP SIM%RY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS MS tPEP. DWO NO, XI-APE.2VS-LC)

VT.3 MA3-CG-407 R6 X... EXAMINED ACCESSIBLE PORTIONS CF REP 1 ACED 186100 PSV.41 2F013C (IRTT. SURF.)

6" X 10" RELIEF VALVE B-M.2 VEVE BODY AND ITS ASEEMBLY TO ETW (INTERNAL SUEFACES) B12.50 PILOT. (R0725529) 17C /291 /473 /252 186200 PSV.41 2F013G (INT. SURF.) VI.3 NRG-CG.407 R6 X- .. EXAMINED ACCESSIBLE PORTIONS CF REPLACED 6" X 10" RELIEF VALVE B.M.2 VEVE BODY AND ITS ASSEMBLY TO NEh IINTERNE SURFACES) B12.50 PILCT. (R0717635) 17C /291 /473 /252 186300 PSV.412F013L (INT. SURF.) VT.3 MAG.CG.4 07 R6 X... EXAMINED ACCESSIBLE PORTIONS OF REPLACED

. E' X 10" RELIEF VEVE B-M.2 VALVE BODY AND ITS ASSEMBLY 70 hTW ,

(INTERN E SURFACES) B12.50 PILOT. (R0727537) 17C /281 /473 /252 UT.45S UT. LIM-106VD R0 X. .. EXAM!NED PER AUG.05, NRC TECHNIC E 106100 APE.2MS-LC WC04 N/A+ 70SITION MEB 3 1 (NUREG.0800, *NO BREAK" 26' ELBOW 70 VALVL HV.41 2F022 C N/A BOUNDARIES). EXAM LIMITED TO 38%

13C /274 /473 /340 COVERAGE DUE TO A WHIP RESTRAIh*I.

(C0183736)

UT-45S UT. LIM.106VD RD X... EXAMINED FER AUG.05, NRC TECICIICE 186900 AFE.2MS*LC WC05 N/A+ POSITION MEB 3 1 (NUREG4 00 0 0, 'NO BREAK" V E VE NV.41+2F022C TO FLUED HEAD (X.7C) N/A BOUNDARIES). (C0183736) 130 /274 /473 /340 ,

UT.CL UI. LIM-106VD R0 X..- EXAMINED FER AU3 05, NRC TECHNICE 187100 AFE.2MS.LC WCC6 FLUED HEAD (X.70) TO VALVE N/A+ UT.455 UT. LIM-106VD R0 X..- POSITION MEB 3 1 (NUREG-0800. 'NO BREAK' HV.41 2F028 C N/A BOUNDARIES). (C0184088) 25 /274 /587 / 0 187800 APE.2MS.LC-8 SWD MT MT. LIM.001VI R2 X-.. (CC183596) 26' PIPE TO 26*x8" SWEEPOLET B.J UT.45S UT. LIM-106VO R3 X..-

17C /231 /473 /252 29.31

p DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PACE: 13 kEVISION: 0 INSERVICE INSPECTION SUSARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUIAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ME DEGE l SEC. XI RCEP SUbf1ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

MS (PrF. DWG, NO. XI- APE-?MS-LC')

I J87900 AFE.2MS-LC-8 SWE MT MT. LIM.001V1 R2 X. .. (C0183596)

! 26*x8" SWEE.POLET TO 8" P!PE B.J UT-45S UT-LIM-106VD RC ..X.

! 17C /291 /473 /252 B9.11 i

i i 188100 APE.2MS.LC-8 SWG MT MT. LIM 001V1 R2 X- - (CD183646) 26' PIPE TO 26*x10' SWEEPOLET E-J 17T.4 55 UT. LIM-106VD R0 X...

1?C /281 /473 /252 B9.31 188200 APE-2MS.LC.8 SWK (C0183736)

, 26* PIPE TO 26*x8" SWEEPOLET B-J 17C'/281 /473 /252 29.31 189000 APE.2MS.LC.35 SWA UT.455 L'I. LIM.106VD R0 X-.- EXAMINED PER AUG-05, NRC TECIDi1 CAL 26' PIPE TO ELBOW N/A+ POSITION MEB 3 1 (NURE3.C800, 'NO BREAK" 13C /274 /473 /335 N/A BOUNDARIES). (C0184032)

' 189400 APE.2MS HHC1 VT.3 MAG.CG.4 07 R6 X... (C0183646) i VARIABLE SUPPORT- F.A 1

l 17C /300 /473 /252 F1.10 i

MS fPEF DWG. WO, XT-APE-2MS-LD' i 192100 PSV-41 2F013D (INT. SURF.) VT 3 MA3.C3-407 R6 X .. EXAMINED ACCESSIBLE PORTIONS OF REPIACED 6" X 10' RELIEF VALVE B-M.2 VALVE BODY AND ITS ASSEMBLY TO NEW (INTERNAL SURFACES) E12.50 PILOT. (R072522 )

17C /291 /473 /288 j

192200 PSV 41 2F013H (INT. S*JRF. ) VT.3 MA3-C3 407 E6 X.-- EXAMINED ACCESSIBLE PORTIONS OF REPLACED 6' X 10* RELIEF VALVE B.M-2 VALVE BOCY AND ITS ASSEMBLY TO NEW (INTERNAL SURFACES) B12.50 PILOT. (R0771716) 17C /291 /473 /288 l

I 1

l I

LIMERICK CENERATING STATION UNIT 2 PAGE: 14 DATE: 08/20/99 ,

REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBEk IDENTIFICATION ITEM NO METHOD FROCEDURE CRMR REMARKS MS (R FF DW7. . NO. XI-AFE-2MS-LDS 192300 PSV.41 2F013M (INT. SURF.) VT-3 MAG-CG-407 R6 X--. EXAMINED ACCESSIBLE PORTIONS OF REFLACED 6" X 10" RELIEF V EVE B M-2 VALVE BODY AND ITS ASSEMBLY TO NEW (INTERNE SURFACES) B12.50 PILOT. (R0727756) 17C /280 /473 /284 192400 PSV-41 2F013S (INT. SURF. ) VT-3 SPEC 8031-P-303 X* CODE CREDIT FOR EXAMINATION OF 6' X 10" RELIEF VALVE B-M-2 ACCESSIBLE PORTIONS OF REFLACED VALVE (INTERN E SURFACES) 812,50 BODY AND ITS ASSEMBLY TO NEW PILOT TAKEN 17C /280 /473 /288 FROM FERFORMANCE OF EQUIVALEhi VISUE CLEANLINESS EXAMINATION OF V EVE INTERNES. SEERECORD OF CHANGES, ISI PLAN REV al FOR DETAILS.

M9 'RFF DWO. NO. KI-EPP-201-11 200700 EBB-201-1 FW2 UT-OL UT-LIM-106VD R0 X--. BASELINE EXAMINATION: EXAMINED FER 26" ELBOW TO PIPE N/A+ UT-45S L7-LIM-106VD R0 X--- AU3 05, NRC TECHNICE POSITION MEB 3 1 25 /272 /480 / 0 N/A (NUREG-0800 "NO BREAK" BOUNDARIES #.

25 /272 /480 / 0 (C0184054) 200900 EBB-201-1 1A FW2 LU MIN UT 0L Li-LIM-106VD B0 X- - BASELINE EXAMINATION: (C0184054)

ELBOW SEAM MINIKJM N/A+ LT-45S Li-LIM-106VD RD X--.

25 /272 /480 / 0 N/A 201100 EBB-201 1 1A FW2 LU MM UT-DL L7-LIM-106VD RD X--. BASELINE EXAMINATION: (C0184054) .

ELBOW SEAM MAKIWJM N/A+ L7-4 55 Li-LIM-10fVC RO X--.

25 /272 /480 / 0 N/A 202900 EBB-201-1 1A SW2 LT-OL Li-LIM.106VD R0 X-- - BASELIhE EXAMINATIONi EXAMINED PER 26' PIPE TO EIJtOW N/A+ L7 45S L7. LIM-106VD RD X-- - AU3-C5, NRC TECHNICAL POSITION MEB 3-1 25 /274 /480 / 0 N/A (N'5 E3-0800, 'NO BREAK" BOUNDARIES).

25 /274 /480 / 0 (C0184054)

I l.

I l

l DATE: 08/20/99 LIMERICX GENERATING STATION UNIT 2 . PA:;E : 15 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD FERIOD, SECOND O W AGE (99RF) l CLASS 2 CAUEP STATJS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUP94ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARXS l ....... .............................. ....... .......... ................ . ... ........................................

MS fREF. DWG NO XI-EBB-201-1)

)03100 EBB-201-1-1A SW2 LD MIN W-OL UT-LIM-106VD R0 X. .* BASELINE EXAMINATIONS (C0184054)

ELBOW SEAM MINIMUM N/A+ UT-45S UT-LIM 106VD R0  ?. .-

25 /273 /480 / 0 N/A i 203300 EBB-201 1-1A SW2 LD MAX Li-OL W-LIM-106VD RD X..- BASELINE EXAMINATIONi (C0184054)

ELBOW SEAM MAXIMUM N/A+ UT-45S UT-LIM-106VO R0 X-*-

l 25 /273 /480 / 0 N/A l

t 205600 EBB-201 1 FW33 UT-OL UT-LIM-106VD R0 X..- BASELINE EXAMINAITON: EXAMINED FER

. 26* VALVE HV-41 2F028C TO 26' N/A+ UT 458 UT LIM-106VD R0 X. .. AUG-05, NRC TECHNICAL POSITION MEB 3-1 PIPE ID. 23.647' MATCH V ID. N/A (NUREG-0800, *NO BREAK

• BOUNDARIES).

25 /274 /480 / 0 (C0184086) l MS f P FF DW3. NO. XI-EPP-207-15 l

j 234800 EBB-207 1 FWBA MT MT-LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CLAMP LUG EBB 207 1 9 TO 18' PIPE C-C SATISFIED BY RR-05, REval. (C0186025) j (H7) C3.20 I 5 /260 /355M / 0 l

l l

l l 214900 EBB-207 1 FWBB MT MT-LIM-001V1 R2 X-. . LIMITED EXAM DUE TO HANGER CLAMP

, LUG EBB 207 1-10 TO 18' PIPE C-C SATISFIED BY RR-05, REVW1. (C0186025)

(H7) C3.20 l

5 /260 /355M / 0 e

235000 IBB-207-1 FWBC MT MT-LIM-001V1 R2 X- *- LIMITED EXAM DUE TD HANGER CLAMP LUG EBB-207-1-11 TO 18* PIPE C-C SATISFIED BY RR-05, REV#1. (C0186025)

(H7) C3.20 5 /260 /35MM / 0 235100 EBB-207 1 FW8D MT MT-LIM-001V1 R2 X.-- LIMITED EXAM DUE TO HAN7ER CLAMP LUG EBB-207-1-12 TO 18' PIPE C.C SATISFIED BY RR-05, REV#1, IC0186C25)

(H7) C3.20 5 /260 /355M / 0

LATE: 08/20/99 LIMERICX GENERATING STATION UNIT 2 . PAGE: 16 REVISION: D INSERVICE INSPECTION

SUMMARY

REPCRT FIRST INTERVAL. THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 3 CAUEP STAWS COMP 0hT.NTS NR R ASME OEGE SEC. XI RCEP SG MARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS MS (REF. DWG No. GBO-216-4) 276600 GBC.216 4 FW11 VT.3 MAG.CG-407 R6 X.-. (C0185075)

GBC-216 4 9 TO 1 1/2' PLATE D.A,B (H901) D1,2.20 13C /230 /172 /340 277000 GBC.216 H901 VT-3 MAG.CG-407 R6 X-.. (C0185075)

ANCHOR F-A 13C /234 /172 /340 F1.30 pcic 0FF DwG No. xI-EPe-209 25 300500 EBB-209 2 FW16A MT MT-LIM 001V1 R2 X*

• LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-209 2 28 TO 6" PIPE C-C SATISFIED BY RR.05, REV#1. (C0184912)

(H26) C3.20 18 /191 /174 / 0 300600 EBB-209 2 FW16B MT MT-LIM-CDIV1 R2 X -. LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-209-2-29 70 6' PIPE C-C SATISFIED BY RR.05, REV#1. (C0184 912 )

(H26) C3.20 18 /191 /174 / 0 300700 EBB.209-2 FW16C MT MT. LIM-001V1 R2 X .. LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-209 2-30 TO 6" PIPE C-C SATISFIED BY RR-05, REV#1. (C0184912)

(H26) C3.20 18 /191 /174 / 0 300800 EBB.209 2 FW16D MT MT-LIM-001V1 R2 X... LIMITED EXAM DUE TO HANGER CLAMP LUG EBB.209 2-31 TO 6' PIPE C-C SATISFIED BY RR-05, REVW1. (C0184 912)

(H26) C3.20 18 /191 /174 / 0 300900 EEB 209 2 FW12A MT hT-LIM-001V1 R2 X-. . LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-209 2 8 TO 6" PIPE C.C SATISFIED BY RR.05, REV#1. (C0184924)

(H29) C3.20 18 /182 /174 / 0

DATE: 08/20/99 LIMERICX CENERATING STATION UNIT 2 . PAGE: 17 REVISION: 0 INSERVICE INSPEC'" ION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND QUTAGE (99EF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SU191ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARR$  ;

o R7!C 'REF. DWG No. XI.rPP.209-21

,301000 EBB.209-2 FW12B MT MT. LIM-001VI R2 X... LIMITED EKAM DUE TO KANGER CLAMP LOG EBB.209 215 TO 6' PIPE C.C SATISFIED BY RR-05. REVW1. (C0184924)

(H29) C3.20 18 /182 /174 / 0 301100 EBB-2C9 2 FW12C MT MT. LIM-001V1 R2 X... LIMITED EXAM DUE TO HANGER CLAMP LUG EBB.209-2 10 70 6' PIPE C-C SATISFIED BY RR-05, REV#1. (C0184924)

(H29) C3.20 18 /182 /174 / 0 301200 EBB-209 2 FW12D KT MT. LIM-001V1 R2 X... LIMITED EKAM DUE TO KANGER CLAMP LUQ EBB.209 2 9 70 6' PIPE C.C SATISFIED BY RR.05, REV#1. (C0184924)

(K29) C3. 2 0 18 /182 /174 / 0 305100 EBB.209 E26 VT 3 MAG.CG-407 R6 X-. . (C0184912)

VARIABLE SUPPORT F-A 18 /191 /174 / 0 F1.20 PCIC (FFF DWG NO. XT-FPB-235-76

,312300 EBB.235 2 FWSA MT ffr. LIM.001V1 R2 X.

• LIMITED EXAM DUE TO HANGER CLAMP

. LU3 EBB.235 2 9 70 6' PIPE C.C SATISFIED BY RR-05, REVW1. (C0184041)

(H.11) C3.20 l 25 /272 /480 /.0 1

l l

312400 ebb.235 2 TW9B MT MT. LIM.001VI R2 X... LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-235 2 10 70 6' PIPE C.C SATISFIED BY RR.05, REV#1. (C0184041)

(H-11) C3.20 l 25 /272 /480 / 0 1

312500 EBB.235 2 FW9C MT MT-LIM.001VI R2 X. . . LIMITED EKAM DUE TO HANGER CLAMP LUG EPB.235-2 11 TD 6' PIPE C.C SATISFIED BY RR.05, REV#1. (C0184 041)

(H.11) C3.20 25 /272 /480 / 0

LATE: 08/20/99 LIMERICK CDTRATING STATION UNIT 2 . PAGE: 18 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99PF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM No f TTHOD PROCEDURE CRMR FEMARKS PCIT (FFF. DWO NO. XI-EPP-2 M-2) 312600 EBB-235-2 FW9D MT MT-LIM-001V1 R2 X--. LIMITED EXAM DUE TO HANOER CLAMP LUG EBB-235-2 12 TO 6" PIPE C-C SATISFIED BY RR-05, REVW1. (C0184041)

(H-11) C3.20 25 /272 /480 / 0 312700 ESB-235-2 FW10A MT fff-LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-235-2-13 TO 6

• PIPE C-C SATISFIED BY RR-05, REV#1. (C0lb4041)

(H 11) C3.20 25 /272 /480 / 0 I

312800 EBB-235-2 FW20B MT MT. LIM-001V1 R2 X..- LIMITED EXAM DUE TO HANGER CLAMP LUG EBB-235-2-14 TO 6" PIPE C-C SATISFIED BY RR-05, REV#1. (CC184041)

(H-11) C3.20 j 25 /272 /480 / 0 312900 EBB-235-2 FW10C MT MT-LIM-001VI R2 X -- LIMITED EXAM DCE TO HANGER CLAMP LUG EBB-235 2-15 TO 6" PIPE C-C LATISFIED BY RR-05, REVW1. (C0184041)

(H-11) C3. 2 0 .

25 /272 /400 / 0 313000 EBB-235-2 FW10D MT MT-LIM-001V1 R2 X .- LIMITED EXAM DUE TO HANGER CLAMP LU3 EBB-235-2 16 TO 6" PIPE C-C SATISFIED BY RR-05, REVal. (CC184041)

(H 11) C3.20 25 /480 /480 / 0 318000 EBB-235 H11 VT-3 FM-CG-4 07 R6 X--- (C0104041)

RICID SUPPORT F-A 25 /272 /480 / 0 F1.20 FitP tRFP DW3. No XI-DCA-204-35 327600 HV-51-2F050B (BOLTIN2) VT-1 FM-CG-4 07 E6 X--+ (C0103726) 12" A.O. CHECK VALVE RONNET Ah"J B-3-2 HINOE FIN COVER BOLTING B7.70 18C /265 /473 / 90 l

1 i

i DATE: 08/20/99- LIMERICK CENERATING STATION UNIT 2 , PAGE: 19 REVISION: 0- INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE 199RF)

CLASS 1 CAUEP STATUS COMPOhTNTS NR R ASME OEGE SEC. XI RCEP SUWARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PHP (REF. DW9. NO. XI-DCA-204-2

,327700 MV.51-2F05CB (INT. SURF. ) VT.3 MA3-CG-407 R6 X... (C01837161 12' A.O. CHECK VALVE (INTERNAL B-M 2 SURFACES) B12.50 18C /265 /473 / 90 PHR fRFF. DWG NO. XT-DCA-204-4) 329200 HV-51-2F050A (BOLTING) . VT-1 MAG-CG-407 R6 X..- (C01837'6) 12' A.O. CHECK V EVE BONNET AND B.G-2 j HINGE PIN COVER 90LTING B7.70 17C /265 /473 /270  !

329300 HV-51 2F050A (INT. SURF.) VT.3 MAh CG-407 R6 X-.. (C0183716) l 12* A.O. CHECK VALVE (INTERNE B-M-2 l

, SURFACES) B12.50 l 17C /265 /473 /270 l

l 329700 DCA-204-4 FW8 PT LP-LIM-001V3 R1 X... (C0183782) 12' VALVE 51 3F060A 70 PIPE B-J+ UT-45$ ITT-LIM-102VD RD X .-

! 17C /265 /473 /270 19.1% UT-6CRL UT LIM 102VD R0 X+..

i UT-45S UT LIM-102VD RO X..- EXAMINED PER AUG-01. NRC GL 88 01,

,329800 DCA-204-4 FW8 12" VALVE 512F060A TO PIPE N/A+ ITI- 6 CRL UT-LIM-102VO RD X--- INTER 0RANULAR STRESS CCRROSION CRACKING, I 17C /265 /473 /270 N/A (C0183782) i l

! 230100 DCA-204-4-2 FW8 LD PT LP-LIM 001V3 R1 X. -- (C0183782) l 12' PIPE SEAM B-J IT*-4 55 UT-LIM-102VD R0 X-..

I 17C /265 /473 /270 89.12 PMR fFEF. DWG. NO. XI-DLA-PI?-35 356900 CLA-212-3 FW1 PT LP-LIM-001V3 R1 X- .. EXAM LIMITED TO 85% CODE COVERA 3E 12' VALVE HV-51 2FC17A 70 B-F UT-458 UT-LIM-102VD R0 X-.. CCNSISTANT WITH RR-10. (C0183971)

FLLTD HEAD (X-45A) B5.130 UT-45RL UT-LIM-102VD RD X. .-

17 /28$ /589 / 0

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 , FAGE: 20 REVISION: D INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OLTAGE (99RTl CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCRP SUPNARY EXAMINATION AREA CATOY EXAM EOOO NUMBER IDENTIFICATION In:M No METHOD PROCEDURE CRMR REMAPKS

....... .............................. ....... .......... ................ .... e RPR fRFF. DWG. NO. XI-DLA-212-3) 357000 DLA-212-3 FW3 PT LP-LIM-001V3 R1 X... (C0183634)

FLUED HEAD (X.45A) 'O . t

• PIPE B-F UT-45S UT. LIM-102V7 RO X-..

(BIMETALLIC) B5.130 17C /265 /473 /265 PHP fFFF. DW3. NO. XI-DLA-212-41 359100 DLA-212-4 FW1 PT LP-LIM-001V3 R1 X-. . EXAM LIMITED TO 85% C00E COVERAGE VALVE HV-51-2F017C TO FLUED . B-F UT-45S 17I. LIM-102VD R0 X. .. CONSISTANT WITH RR-10. (C0183971)

HEAD X-45C (BIMETALLIC) B5.130 45 45RL UT-LIM.102VD R0 X-. .

13 /285 /589 / 0 35D200 DLA.212 4 FW3 PT LP. LIM-001V3 R1 X... (C0183971)

FLUED HEAD X.45C TO 12" PIFE B.F UT-458 UT. LIM-102VO RD X- -

l BIMETALLIC) B5.130 13C /285 /473 /275 RHR f 7FF DWO. NO. XI-2F-206) 366000 2AE-205 SG-4 UT.0L LT-LIM-011VO R0 X-.. BASELINE EXAMINATION (C0186219)

SHE!7L (RING #4) TO SHELL (RING C-A LT.45S LT. LIM-011VC R0 X...

1. 3) WELD C1.10 17/ 205 / 280 / 0 RHR 'FFF. DW'J . NO. XI-2P-202) .

367200 2BP.2C2 SWN.1 16 MT PC-LIM-001V1 R2 X-.- (C0185058)

OISCHAR3E ELBOW TO STUFFING C.G BOX WELD C6.10 18 /177 /174 / 0 367300 2BP.202 SWC.1 16 MT MT-LIM-001V1 R2 X,-- (C0185058) f I

DISCHARGE ELBOW TO FLANGE WELD C.G 18 /180 /174 / 0 C6.10

DATE: 08/20/99 LIMERIOK GENERATING STATION UNIT 2 , PAGE: 21 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVE, THIRD TERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

RMR fFEF. DWG. NO. XI-2P-202) 367400 2BP.202 SWN 2 16 MT MT. LIM.001VI R2 X.-- (C0185058)

STUFFING BOX ATTACHMENT WELD C-G 18 /180 /174 / 0 C6.10 367800 2BP-202 FC-1 VT-3 MAG-CG.4 07 R6 X--- (00185058)

FINE MECHANIC E CONN HOLD F-A DOWN FLG (INCLUDES 10 BOLTS) F1.40 la /177 /174 / 0 368300 2AP-202 SWB VT-1 MAG-C3 407 R6 X- -- AOCESS ACHIEVED THROUGH PUMP DISASSEMBLY SUCTION NOZZLE TO PUMP CASING C.G DURING 2ROS ETERNATIVELY PER RELIEF WELD C6.10 REQUEST #7, DUE TO RADIATION ENVIRONMENT

/ / / 0 , A VISUE EXAM WAS PERFORMED IN LIEU CP SURFACE EXAM. (C018'2 024 )

368400 2AP.202 SWB LU VT-1 MAG-CG.4 07 R6 X..- ACCESS ACHIEVED THROUGH PUMP DISASSEMBLY NOZZI.E SEAM C.G DURING 2ROS; ETERNATIVELY PER P2 LIEF

/ / / 0 C6.10 REQUEST #7, DUE TO RADIATION

/ / / 0 ENVIRONMENT, A VISUE EXAM WAS PERFORMED IN 1.IEU OF SUFJACE EXAM. (C0182024)

, 368500 2AP.202 SWO VT.1 MA3.CG 407 R6 X.-- ACCESS ACHIEVED THROUGH PUMP DISASSEMBLY PUMP CASING WELD C-G DURIN3 2RO5; ALTERNATIVELY PER RELIEF (I4NGITUDINEl 06.10 REQUEST #7, DUE TO RADIATION

/ / / 0 ENVIRONMENT, A VISUE EXAM WAS FERFORMED IN LIEU OF SURFACE EXAM. (00182024) 368800 2AP-202 SWD VT.1 MA3.CC.407 R6 X-.- ACCESS ACHIEVED THROUGH PUMP EISASSEMBLY PUMP CASING TO HOLD DOWN C-0 DURIN3 2RO5; ETERNATIVELY PER FILIEF FIANGE WELD C6.10 REQUEST #7, DUE TO RADIATION

/ / / 0 ENV!RONMENT, A VISUE EXAM WAS PERFORMED IN L7EU OF SURFACE IlAM. (C0182024) i

l l

l DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 ,

PAGE: 22 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CA'I13Y EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

PMR 'ItFF . DW3 NO, XI-2P-202) 368900 2AP 202 SWE VT-1 MAG-CG-407 R6 X--- ACCESS ACHIEVED THROUGH PUMP DISASSEMBLY PUMP CASING WELD C-G DURING 2RO5; ALTERNATIVEIY PER RELIEF (CIRCUMFERENTIAL) C6.10 REQUEST #7, DUE TO RADIATION

/ / / 0 ENVIRONMENT, A VISUAL EXAM WAS PERFORMED IN I.IEU CF SURFACE EXAM. (C0182024)

FMP fPEF. DW3. NO XI-GPB-206 21 405500 GBB-205-2 FW3 MT MT-LIM-001V1 R2 X. -- BASELINE EXAMINATION (C0183988) 16"-ELBOW TO PIPE C-F-2 UT 0L UT-LIM-1C6VD RC X- -.

14 /297 /580 / 0 C5.51 ITI-4 5S UT-LIM-106VD R0 X-..

406600 GBB-205-2-2 SW2 MT MT-LIM-001V1 R2 X-.. BASELINE EXAMINATION (C018398) 16" PIPE TO 45DEG. ELBOW C- F- 2 UT.0L UT-LIM-106VD R0 X- ..

14 /295 /580 / 0 C5.51 UT-45S UT-LIM.106VD R0 X- --

RRR IPEF. DWG. NO. XI-G?9-217-1) 427500 GEB-217 1-2 SW6 MT MT-LIM-001V1 R2 X-. - BASELINE EXAMINAITON (C0184906) 18" PIPE TO PIPE C-F-2 UT-OL UT-LIM-106VD R0 X- -.

17 /199 /280 / 0 C5.51 L'I- 4 5S UT-LIM.106VO RO - -X-RER (RFP DWO. NO. XI-GP9-217-21 628700 GBB-217-2 FW15A MT MT-LIM-001V1 K2 X. .- LIMITED EXAM DUE TO HANGER CLAMP ,

LUG GBB-217-2-13 TO 18" PIPE C-C SATISFIED BY ER-05, REVW1. (C0184929)

(H13) C3.20 18 /189 /174 / 0 428800 GBB-217-2 TW15B MT MT-LIM-001V1 R2 X- +- LIMITED EXAM DUE TO HANGER CLAMP LUG GBB-217-2-14 TO 18" PIPE C-C SATISFIED BY RR 05, REV#1. (C0184929)~

(H13) C3.20 18 /189 /174 / 0

DATE: 08/20/99 LIMERICX GENE 9ATING STATION LHIT 2 . PAGE: 23 REVISION: C INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SE TND OUTAGE (99RP)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

PHP (PEF. DWG, NO. XI-GBB-217 25

,428900 GBB-217-2 FW15C MT MT-LIM-001V1 R2 X- -- LIMITED EXAM DUE TO HANGER CLAMP LUG GBB-217-2-15 TO 18' PIPE C-C SATISFIED BY RR-05, REV#1. (C0184929)

(H13) C3.20 10 /189 /174 / 0 429000 GBB-217-2 FW15D MT MT-LIM 001V1 R2 X.-- LIMITED EXAM DUE TO HANGER CLAMP LUG CBB-217+2-16 TO 18' PIPE C-C SATISFIED BY F.R-05, REV#1. (CC184929)

(H13) C3.20 18 /189 /174 / 0 429100 GBB-217-2 FW15E M MT-LIM-001V1 R2 X -- LIMITED EXAM DUE TO HANGER CLAMP LUG GBB-217 2-17 TO 16' PIPE C-C SATISFIED BY RR-05, REVW1. (C01849291 (H13) C3.20 18 /189 /174 / 0 429200 GBB-217-2 FW15F E MT-LIM-001V1 R2 X-- -

LIMITED EXAM DUE TO HANGER CLAMP LUG GEB-217-2-18 TO 18' PIPE C-C SATISFIED BY RR-05, REVW1. (C0184929)

(M13) C3.20 18 /189 /114 / 0 429300 GBB-217-2 FW153 MT MT LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CIAMP

, LUG GBB-217-2-19 TO 18' PIPE C-C SATISFIED BY RR-05, REVW1. (C0184929)

(H13) C3.20 18 /189 /17e / 0 e

429400 GBB 217-2 FW15H MT MT-LIM-001V1 R2 X--- LIMITED EXAM DUE TO HANGER CIAMP LUG GBB-217-2-20 TO 18' PIFE C-C SATISFIED BY RR-05, REV#1. (C0184929)

(H13) C3.20 18 /189 /174 / 0 430600 GBB-217 2 2 SW1 MT MT-I,IM-001V1 R2 X. -

BASELINE EXAMINATION (C0184929) 18' ELBOW TO PIFE C-F-2 UT-OL UT. LIM-106VO RC X...

18 /187 /174 / 0 C5.51 UT-455 UT-LIM-10fv0 RC X ..

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGEr 24 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 2 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS 4

PHR rREF. tWG. NO XI.GBB-217-2) 430900 GBB-217 H13 VT-3 MAG-CG-407 R6 .X+- (C0184929)

RIGID SUPPORT F.A

.8 /189 /174 / 0 F1.20 PHR (REF. DWC NO. XI-CPP-219-2) 437400 GBB-218-2 FW2C MT KT-LIM.001V1 R2 X--. BASELINE EXAMINATION (C0184854) 18' PIPE TO PIPE C-F-2 UT.CL UT-LIM-106VD RD X-. -

17 /256 /475 / 0 C5.51 UT-45S UT-LIM-106VO R0 ..X-438700 GBB.218 2-4B SW2 MT MT-LIM-001V1 R2 X- .- BASELINE EXAMINATION (C0184854) 18' PIPE TO 18'X18'X18' TEE C-F-2 UT.0L Ur-LIM-106VO R0 X- ..

17 /272 /475 / 0 C5.51 UT.45S UT-LIM-106VD RD X.. .

440800 GBB-218 H71 VI-3 MA3-CG-407 R6 X-- -

(C0184854)

RIGID SUPPORT F-A 17 /253 /475 / 0 F1.20 440900 GEB-218 H70 VT-3 MAG-CG-407 R6 X... (C0184854)

RIGID SUPPORT F-A 17 /265 /475 / 0 F1.20 FirR tRFF. CWG, NO XI.M?9-217-1) 488320 HBB-217 N28 VT-3 MAG-CG.4 07 R6 X-.- BASELINE INSPECTION CF RIGID RESTRAINT RIGID RESTRAINT F-A ADDED AS A RESULT OF SUCTION STRAINER 172 /177 / / F1.20 MOD # P00285-2. (C0182914) 088340 HBB-217 H29 VT-3 MAG-CG 407 R6 X--. BASELINE INSPECTION OF RIGID RESTRAINT RIGID RESTRAINT F-A ADDED AS A RESULT OF SUCTION STRAINER 172 /177 / / F1.20 MOD 8 P00285-2. (CC182924) ,

l l

i

r i

DATE: 08/20/99 LIMERICK GENERATING STATION LTIT 2 . PAGE: 25 t REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 2 CA*.'EP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PHR 'FEF. DWG. NO. XI-MPB-217-1)

,488360 HBB-217 H30 VT-3 MAG-CG-407 R6 X-- - BASELINE INSPECTION OF RIGID RESTRAINT RIGID RESTRAINT FA ADDED AS A RESULT OF SUCTION STRAINER 172 /177 / / F1.20 MOD # F00285-2. (C0182925) 488380 HBB-217 H31 VT 3 MAG-CG-407 R6 X.-. BASELINE INSPECTION CF RIGID RESTRAINT RIGID RESTRAINT F-A ADDED AS A RESULT OF SUCTION STRAINER 172 /177 / / F1.20 MODW P00285-2. (C0182926)

R::R fRFF. DWS. NO. XI-MPB-217-2) 489500 HBB.217-2 FW51 MT MT-LIM-001V1 R2 X- ..

24" PIPE TO PIPE C-F 2 UT 0L UT-LIM-106VO RO X-. -

18 /181 /174 / 0 C5.51 UT-45S Li-LIM-106VD RC X--.

RHR (PEF. DWG. NO. XI-EPP-218-1) 495825 HBB.218-1 FW1201 MT MAG-CG-403 R6 X-- - BASELINE INSPECTION OF NEW WELD AS A 20" PIPE TO FLANGE C-F-2 RT ISI-CCP.300,R12 -X. . RESULT CF ALTERNATE DECAY HEAT REMOVAL 18 /237 /376 / 0 C5.51 MOD # P781. (C0184568) 495850 HBB 218 1 FW1202 MT MAG-CG-403 R6 X.. . BASELINE INSPECTION OF NEW WELD AS A 20" FLANGE TO PIPE C.F-2 RT ISI-QCP-300 R12 -X-- RESULT OF ALTERNATE DECAY HEAT REMOVAL 18 /237 /376 / 0 C5.51 MOD # P781. (C0184568)

PHR 'FEF. DWG. NO- XI-MPP-219-21 498700 HBB-218 2-3 SW1 MT MT. LIM-C01V1 R2 X- -- BASELINE EXAMINATION (CC185007) 20" ELBOW TO PIFE C-F-2 Ur-CL UT. LIM 106VD RC X---

18 /192 /174 / 0 C5.51 UT-45S LT LIM-106VD RD X---

PHP ' PEF DWG. NO XI-WPB-219-5) 507000 HBB-218-5 FW2 MT MT-LIM-001V1 R2 X-* - BASELINE EXAMINATION (C0184956) 20" VALVE NV-51-2F006B TO PIPE C-F 2 UI.0L UT-LIM-106VD RC X-- -

18 /184 /174 / 0 C5.51 Ur-45S UT. LIM-106VO RC X.. .

LIMERICK GENERATING STATION UNIT 2 PAGE: 26 EATE: 08/20/99 .

REVISION: 0 INSERVICE INSPECTION SUMMI.RY REPORT FIRST INTERVAL, THIRD PERIOD, SECCND OUTAGE (99RF)

CIASS 2 CAUEP STAI"JS COMPONENTS NR R ASME OEGE

~

SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS FFF 8FTF. DWG. NO. XI-R99-219-Si 507100 MBB-218-6 1 SW1 C MT-LIM-001VI R2 X- -- BASEI.INE EXAMINATION (C0184959) 30' ELBOW TS FLANGE C r-2 UT-OL W-LIM-106VD R0 X- --

18 /179 /L74 / 0 C5.51 UT-45S L'I-LIM-106VO R0 X-- -

RHP f P EF DWG. NO XI-FEP-21P-H 511100 HBB-218-7 FW1 MT C-LIM-001V1 R2 X. .- BASELINE EXAMINATION (C0185053) 24" ELBOW TO 24"x24'x20" RED C-F-2 UT.0L UT-LIM-106VO RC X- -

TEE C5.51 UT-45S UT-LIM-106VD RD X---

18 /181 /174 / 0 511600 HBB-218-7-1 SW4 MT MT-LIM-001V1 R2 X- -- BASELINE EXAMINATION (C0185053) 24 *x24 *x20" RED "*EE TO PIPE C-r-2 W- OL UT-LIM-106VO R0 X. --

18 /181 /174 / 0 C5.51 UT-45S UT-LIM-106VD RC X-- -

PR (PFF. DW3. NO. XIva 1 2RS-2M 645400 VRR-2RS-2A-5 SWA PT LP LIM-001V3 R1 X--- LIMITED EXAM DUE TO HANGER CIJMP 2 1/2 *x2 1/2"x2" LUG FOR i i" B-K.1 SATISFIED BY RR-05, REV1 (C0183768)

PIPE (HA1) B10.10 13C /260 /473 / 0 i

645500 VRR-2RS-2A-5 SWB PT LP-LIM-001V3 R1 X--- LIMITED EXAM DUE TO HANGER CIAMP B-K-1 SATISFIED BY KR-05, REV#1 (C0183768) 2 1/2*x2 1/2*x2' LUG FOR 28" PIPE (HA1) B10.10 .

13C /260 /473 / 0 645600 VRR-2RS-2A 5 SWC PT LP-LIM-001V3 R1 X--- LIMITED EXAM DUE TO HANGER CIAMP 2 1/2*x2 1/2*x2" LUG FOR 28' B-K-1 SATISFIED BY RR-05. REV#1 (C0183768)

PIPE (HA1) B10.10 13C /260 /473 / 0 l

1 645700 VRR 2RS 2A-5 SWD PT LP-LIM-001V3 R1 X--- LIMITED EXAM DUE TO HANGER C'.JWP B-K-1 SATISFIED BY RR-05, REV#1 (C0183768) 2 1/2'x2 1/2*x2" LUG FOR 28' PIPE (HA1) B10.10 13C /260 /473 / 0

l DATE: 08/20/99 LIMERICX CENERATING STATION UNIT 2 . PA0E 27 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

PR fPEF. DW3, NO. XI-VPR-2PS-2A)

,650600 VRR-2RS HA1 VT-3 MAG CG-407 R6 X. - - (C0183768)

VARIABLE SUPPORT F-A 13 /260 /473 / 0 F1.10 SLC fpEF. DWG. No. XI-DCA-202-E2) 686600 DCA-202-E2 W5 PT LP-LIM 001V3 R1 X.-- (C0184128)

VALVE HV,48-2F006A TO 2* PIPE B-J 17 /270 /475 / 0 B9.40 l 687400 DCA-2C2-E2 W19 PT LP. LIM-001V3 R1 X..- (C0184128) 2* PIPE TO FLUED HEAD X-116 B-J 17 /265 /475 / 0 B9.21 687500 DCA-202-E2 W20 PT LP-L*M-001V3 R1 X+.- (C0184128)

VALVE HV-48-2FC06B TO 2* PIPE B-J 17 /253 /475 / 0 B9.4 0 687800 DCA-202-E2 W301 VT-3 MAG-C3-407 R6 X--- (C01841261 j ANCHOR: FLUED HEAD X-116 TO F-A

, PENETRATION SLEEVE F1.10 ,

l i 17 /265 /475 / 0

]

l I

l RPV (PFF. DWG, NO XI-RPV-2 PC. 1,2) e 701200 AF TOP SIDE UT-OL UT-LIM-006V5 R0 ..X- EXAMINED 180 TO 360 DEG AZ. (C0183529) l SEELL 5 RPV CLOSURE FIANGE B-A l

CIRC, 325'11", CIRC B1.30 PPV (REF. DWG, NO XI-PPV-2 PG. 3.46 713500 M BOTTOM SIDE UT-OL UT-LIM-300VO RD X... EXAMINED 240 TO 36 0 DEG AZ. (C0183800)

' BOTTOM EEAD DOLIAR PLATE WELD B-A UI-45S UT LIM-300VD RO X.--

CIRC, 270', CIRC Bl.21 UT-608 UT-I.IM-300VC R0 K.. -

i l

\

DATE: 08/20/99 LIMERICK GFSERATING STATION LHIT 2 . PAGE: 28 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOL PRUCEDURE CRMR REMARKS PPV fFFF, DWG N1 XI-RPV-? PG. 3.4) 4 713600 AJ TOP SIDE UT-OL 17T-LIM-300VO R0 X- - - EXAMINED 240 TO 360 DEG AZ. (C0183800)

• BOTTOM HEAD DOLLAR PLATE WELD B-A UT-455 177-LIM-300VC R0 X- - -

CIRC, 270', CIRC Bl.21 UT-60S UT LIM-300VO R0 X- --

713700 DA UT-OL UT-LIM 300VO R0 X- -- (C0183800)

BOTTOM HEAD WELD B-A UT-45S UT-LIM-30CVO R0 X.- -

13C, VW, 348 DEG. Bl.22 UT-60S III-LIM-30CVO R0 X. --

714200 DF UT-OL UT-LIM-300VO R0 X- -- (CC183800)

BOTTOM HEAD WELD B-A UT-45S UT-LIN-300VO R0 X. --

130, VW, 288 DEG. Bl.22 UT-60S UT-LIM-300VO R0 X---

714500 AG MT MT-LIN-00171 R2 X--- EXAMINED 240 TO 360 DEG AZ. (C0183525)

CLOSURE HEAD FI.ANGE B-A Li-CL UT-LIM-300V3 R0 X.--

FF, 352', CIRC Bl.40 UT-45S 177-LIM-300VO R0 X-- -

FF, 352', CIRC UI-6CS UT-LIM-300VO R0 X.--

714600 AH BOTTOM SIDE UT-CL Ur-LIM-300VD E0 X- -- EXAMINED 240 TO 360 DEG AZ. (C0183525)

CLOSURE HEAD DCLLAR PLATE WELD B-A UT-45S UT-LIM-300VO R0 X-- -

FF, 352', CIRC Bl.21 Li-6CS 177-LIM-300VO R0 1-- -

714700 AH TOP SIDE 17I.CL UT-LIM-300VO R0 X- - - EXAMINED 240 TO 360 DEO AZ. (C0183525) f CLOSURE HEAD DCLIJJL PLATE WELD B A UT-45S UT-LIM-300VO R0 X---

FF, 352', CIRC Bl.21 17I-60s 177-LIM-300VO R0 X-- - .

715200 DN (7I- CL 17T-LIM-300VC R0 X-- - (C0183525)

CLOSURE HEAD WELD BA UT-45S UT-LIM-300VO R0 X-- -

FF, 352', 255 DE3. 22.22 UT-60S 17t-LIM-300Vo R0 X- -

715300 DP UT.0L UT-LIM-300VO R0 X- -- (CC183525)

CLOSURE READ WELD B-A UT-453 UT-LIM-300VO R0 X- - -

FF, 352', 315 DEG. Bl.22 UT-60S 17I-LIM-300VO R0 X.- -

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 - PAOE 29 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OW'GE (99RF)

CLASS 1 CAUEP S*"ATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUPEARY EXAMINATIOJ AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR' REMARFJB RPV IPFF. DW3. NO. XI-PPV-2 PG. ?.41

,715000 N6A UT-OL UT LIM-300VO RD X.-. (C0183525)

RPV HEAD SPRAY B-D UT-45S W -LIM 300VO R0 X-.-

FF, 352', 3 DEG. B3.90 W-60S L7. LIM-300VO R0 X-..

715500 N6A-IR ZONE 1 UT-LIM-311V0 RO X -- (C0183525)

RPV HEAD SPRAY B-D ZONE 2A UT-LIM-311VO R0 X-..

FF, 3528, 0 DEG, B3.100 715800 N7 UT-CL W-LIM-300VO R0 X. .- (C0183525)

RPV VENT B-D UT-455 UT-LIM-300VO R0 X-- -

FF. 352', TDC B3.90 UT.60$ UT-LIM-300VD RD X...

715900 N7-IR ZONE 1 W-LIM +311VD R0 X- .- (C0183525)

RPV VENT B-D ZONE 2A UT. LIM-311VO RC X...

FF, 3 5 2 ' , TDC B3.100 PPV-APP fPFF. DWG. NO. XI-PF-6) 722910 RPV-2IN N6A (BOLTING) VT-1 MA3-CG-407 R6 X--- (C0183525)

HEAD SFRAY FLANGE 12 1 1/8" B-G 2 STUDS & 24 1 1/8' NUTS B7.50

, 13 /340 /710A / 0 PPV-APP fREF. CWG. NO. XI-BF-fi e

722940 RPV-2IN NBA PT LP LIM-001V3 R1 X- -. (C01837C2)

NOZZLE 7") SAFE END (JET PUMP B-F+ UI-45S UT. LIM-105VO R0 X. .-

INSTRUMENT) (AZ 105DE3.) B5.10 W-4 5RL UT-LIM-105VD R0 X--.

16C /278 /473 /105 UI-6CRL UT-LIM-105VD R0 X..-

722941 RPV-2IN NBA UT-455 UT-LIM-105VD R0 X..- EXAMINED PER AUG-01, !!RC GL 88-01, N0ZZLE TO SAFE END (JET PUMP N/A+ W-45RL UT-LIM-105VO R0 X.*- INTER 3RANULAR STRESS CORROSION CRACKING.

INSTRUMENT) (AZ 105DE3.) N/A UT.60RL UT-LIM-105VD RD X-.- (C0183702) 18C /278 /473 /105

LIMERICK GENERATING STATION UNIT 2 PACE: 30 DATES 08/20/99 ,

REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OLTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV-APP (REF DWG. NO. XI-BF-8) 722942 RPV-2IN NBA UT-45S LT-LIM-105VD R0 X-- - EXAMINED FER A33-07, SIL 455, NOZZLE TO SAFE END (JET PUMP N/A+ UT-45RL UT-LIM-105VC R0 X--. RECOMMENDATION FOR ADDITIONAL ISI OF INSTRUMENT) (AZ 105DEG.) N/A UT-60RL UT-LIM-105VD R0 X- -- ALLOY 182 NOZZLE WELDMENTS. (C0183702) 180 /278 /473 /105 722955 RPV-2IN N89 PT LP LIM-001V3 R1 X- -- (C0183720)

NCZZLE TO SAFE END (JET PUMP B-F+ UT-45S LT-LIM-105VO RC X- ..

INSTRUMENT) (AZ 289CEG.) B5.10 UT-45RL UT-LIM-105VO R0 X. --

13C /278 /473 /269 VT-6CRL UT-LIM-1C5VO 10 X---

722956 RPV-21N NSB UT-455 UT-LIM-105VD R0 X--- EXAMINED PER AUG-01, NRC GL 88-01.

NOZZLE TO SAFE END (JET PUMP N/A+ UT-45RL UT-LIM-105VC R0 X- -- INTERGRANULAR STRESS CORROSION CRACKING.

INSTRUMENT) (AZ 289CEG. ) N/A UT-6CRL UT-LIM-105VD R0 X--- (C0183720) 13C /278 /473 /289 722957 RPV.21N NSB UT-45S Ur-LIM-105VO RD X--- EXAMINED PER AUG-07, SIL 455, NOZZLE TO SAFE END (JET PUMP N/A+ UT-45RL UT-LIM-105VD R0 X--- RECOMMENDTION FOR ADDITIONAL ISI OF INSTRUMENT) (AZ 289CEG.) N/A LT-60RL UT-LIM-105VC RD X--- ALLOY 182 NOZZLE WELDMENTS. (C0183720) 13C /278 /473 /289 RPV IREF. DWG. NO. XI-RPV-2 PG. 31 724300 RPV CLOSURE HEAD NUTS MT MT-LIM-001VI R2 X. . EXAMINED h"JTS 52 THRU 76. (C0183529)

NUTS SN 1 - SN 76 B G-1 FF, 352', 0-360 DE3. 26.10 .

726400 RPV CLOSURE STUDS IN PLACE UT-OL UT-LIM-007V4 R1 X--- EXAMINED STUDS 52 THRU 76. (00183529)

STUDS SN 1 - SN 76 B-G-1 FF, 352', 0 360 DEG. B6.20 724500 RPV CLOSURE STUDS WHEN REMOVED UT-OL UT-LIM-007V4 R1 X--- EXAMINED STLTS 56 THRU 59 THAT WERE STUDS SN 1 - SN 76 B-G-1 REMOVED. (C0183529)

FF,352',84.6 98.7DEG B6.30

DATE: 08/20/99 LIMERICK CENERATING STATION UNIT 2 , FAGE: 31 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATJS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD FROCEDURE CRMR REMARKS PPV fREP DWG. NO. XI-PPV.2 PC. 3) 724600 THREADED HOLES IN RPV FLANGE UT-OL UT. LIM-008V2 R0 X--- EXAMINED STUD HOLES 52 THRU 76. EXAM HOLES SN1 . SN 76 B-G-1 LIMITED TO 91.6% CODE COVERAGE DUE TO FF, 352', 0 360 CEG. B6.40 FLANGE SEALING SURFACE. (C0183529) 724700 RPV CLOSURE WASHERS VT-1 MAG-CG-407 R6 X... EXAMINED WASHERS 52 Tr(RU 76. (C0183529)

WASHERS SN 1 . SN 76 B-G-1 FF, 352', 0-360 DEG. B6.50 PPV (PFP DWG. NO. X*-PH-1) 724800 FR MT MT-LIM-001V1 R2 X..- FXAMINED BETWEEN 240 AND 360 DEG AZ.

RPV WELD BUILD-UP B-H VT-1 MAG-CG-407 R6 X- .. (C0183800)

CIRC, 272 ' 3 * , CIRC B8.10 724900 CG MT MT-LIM-001V1 R2 X. .. EXAMINED BETWEEN 240 AND 360 DEG AZ.

SKIRT KNUCKLE TO RPV WELD B-H VT-1 MAG-CG.407 R6 X... (C0183800)

CIRC,212'3*, CIRC B8.10 RPV (REF. CWG. NO. XI BN.4)

• 126100 LIFTING LUG (270 CEG.) MT MT-LIM-001V1 R2 X. .. EXAMINED LUG AT 270 DEG AZ PER AUG-9,

, LUG TO C*OSURE HEAD WELD N/A+

• EXAMINATION CF RPV CLOSURE READ LIFTIN3 FF, 352', 270 DEG N/A LUGS". (C0183525)

RPV fRFF. DWG NO XI-PN-1) 726200 STEAL 4 DRYER VT.3 VT-LIM-204 R1 .X-X EXAMINED PER AUG.10, "NON-Q REACTOR DRYER ASSY WELDS, SURFACE & N/A+ PRESSURE VESSEL INTERNAL COMPONENTS LUG N/A (FSAR TABLE 3.2 1)*. EXAMINATION FF, 352'. . REVEA.ED CRACKING IN UPPER SUPPORT RING AT 135 & 315 DEG LIFTIN3 LUGS.

ENGINEERING DISPOSITION, USE-AS-IS, PER NCRW LG 99-01059. (C0183509)

l DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 32 I REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (991F) l l

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARXS RPV (PEF. DWG. NO. XI-BN-2) 727300 SHROUD HEAD \ SEPARATOR ASSY. VT-3 VT-LIM-204 R1 X- . - EXAMINED PER AUG 10, "NON-Q REACTOR WELDS & SURFACES N/A+ PRESSURE VESSEL INTERNAL COMPONENTS FF, 352', . N/A (FSAR TABLE 3.2-1)" (C0183509)

RPV (REF. DWG. NO. XI-BN-3) 727500 JET PUMP W1 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X- - - (C0183509)

WELDS TO PENETRATION N8A B-N-1+

RPV, 278'11", 105 DEG. B13.10 727600 JET PUMP #1 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10, "NON-Q REACTOR hELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)" (C0183509)

RPV,278-11/284 10,622.5 DEG 727700 JET PUMP #1 INST LINE VT-3 VT-LIM-204 R1 X-.- EXAMINED PER AUG-12, 'SIL# 420, WELDS & BRACFJi'TS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES" ANNULUS N/A (C0183509)

RPV,278-11&284-10,s22.5 DEG 72780D JET PUMP #2 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X- - - (C0183509)

WELDS TO PENETRATION NBA B-N-1+

RPV, 278-11,0 105 DEG B13.10 727900 JET PUMP #2 INST LINE VT-3 VT-LIM-204 R1 X--. EXAMINED PER AUG-10, *NON-Q REACTOR l

WELDS & BRACKET 4 SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPOhTNTS ANN'AUS N/A (FSAR TABLE 3.2-1)*. (C0183509)

RPV.278-11/284-10,s37.5 DEG 728000 JET PUMP #2 INST LINE VT-3 VT-LIM-204 R1 X- - - EXAMINED PER AUG-12, 'SIL# 420, WEF S & BEACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES".

ANh"AUS N/A (C0183509)

RPV,278-11/284-10,a37.5 DEG i

l I

I DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 33 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS

+

PPV (PEF. DWG. NO. XI-BN-31

,728100 JET PUMP #3 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X-- -

(C0183509)

WELDS TO PENETRATION NSA B-N-1+

RPV, 278*11',8 105 DEG B13.10 728200 JET PUMP #3 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10, *NON-Q REACTOR WELDS & BRACKETS. SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)'. (C0183509)

RPV,278 11/284-10,352.5 DEG 728300 JET PUMP #3 INST LINE VT.3 VT. LIM-204 R1 X. -- EXAMINED PER AUG.12, *SIL# 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES'.

ANNULUS N/A (C0183509)

RPV,278-11/284-10,652.5 DEG 728400 JET PUMP #4 INST LINE . PENE WELD VT-3 VT-LIM-204 R1 X--- (C0183509)

WELDS TO PENETRATION N8A B-N-1+

RPV, 278'11*, 105 DEG B13.10 728500 JET PUMP #4 INST LINE VT 3 VT. LIM.204 R1 X-.- EXAMINED PER AUG-10, 'NON.Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)" (C0183509)

RPV,278-11/284-10,667.5 DEO 728600 JET PUMP #4 INST I.INE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG.12, 'SIL# 420, WELDS & BRACKETS. SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES' ANNL" US N/A (C0183509)

RPV,278 11/284-10 s67.5 DEG 728700 JET PUMP #5 INST LINE . PENE WELD VT.3 VT-LIM-2 04 R1 X--- (C0183509)

WELDS TO PENETRATION N8A B-N-1+

RPV, 278'11', 105 DEG B13.10 I

l l

l

DATE: 08/20/9) LIMERICK OENERATING STATION UNIT 2 . PAGE: 34 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV fREF. DWG. NO. XI-PN-3) 728800 JET PUMP #5 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)" (C0183509)

RPV,278 11/284-10 tB2.5 DEG 728900 JET PUMP #5 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-12, "SIL# 420, WELDS & BRACKETS-SKROUD N/A+ INSPECTION OF JET PLHP SENSING LINES" ANNULUS N/A (CC183509)

RPV,278-11/284-10,882.5 DEG 729000 JET PUMP #6 INST LINE - PENE WELD VT-3 VT. LIM-204 R1 X .. (C0183509)

WELDS T) PENETRATION N8A B-N-1+

RPV, 278'11', 105 DEG B13.10 729100 JET PUMP #6 INST LINE VT-3 VT-LIM 204 R1 X- .- EXAMINED PER AUG-10, 'NON-Q REACTCR WELDS & BRACKETS-SHROUD N/A4 PRESSURE VESSEL INTERNAL COMPONENTS ANNL".,US N/A (FSAR TABLE 3.2-1) " . (C0183509)

RPV,278-11/284 10,497.5 DEG 729200 JET PUMP #6 INST LINE VT-3 VT-LIM-204 R1 X.-- EXAMIhTD PER AUG-12, 'SIL# 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTICN OF JET PUMP SENSING LIhTS' ANNULUS N/A (C0183509)

RFV,278-11/284-10,497.5 DEG 729300 JET PUMP #7 INST LINE - PENE WELD VT-3 VT LIM-204 R1 X-- - (C0183509)

WELDS TO PENETRATION N8A B-N-1+

RPV, 278'11", 105 DEG B13.10 729400 JET PUMP #7 INST LINE VT-3 VT. LIM-204 R1 X-.. EXAMINED PER AUG-10, *NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNL".,US N/A (FSAR TABLE 3.2-1)". (C01835C9)

RPV,278-11/284-10,4112.5DEG

I

\

l l

f DATE: C8/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 35 I REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STARTS COMPONENTS NR R ASME OEGE SEC. XI RCEP SUh94ARY EXAMINW.' ION AREA CATGY EXAM EOOO PLUMBER IDENTIFICATION  ! TEM NO METHOD PROCEDURE CRMR REMARKS PPV fREF DWG. NO. KI-PN-3)

,729600 JET PUMP #7 INST LINE VT-3 VT-LIM-204 R1  %..- EXAMINED PER AUG-12, "SIL# 420, CELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES" ANNULUS N/A (C0183509)

RPV,278-11/284-10,s112.5DEG 729650 JET PUMP #8 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X--- (C0183509) l WELDS TO PENETRATION N8A B-N-1+

RPV, 278'11", 105 DEG B13.10 72970G JET PUMP #8 INST LINE VT-3 VT-LIM-204 El X-- - EXAMINED PER AUG-10, 'NON-Q REACTOR UELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)* (C0183509)

RPV,278-11/284-10,a127.5DEG 729800 JET PUMP #8 INST IINE VT-3 VT-LIM-204 R1 X- -- EXAMINED PER AUG-12, 'SILN 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTION CF JET PUMP SENSING LINES" ANNULUS N/A (C01835C9)

RPV,278-11/284-10,a127.5DEG l 729900 JET PUMP #9 INST LINE - PENE WELD VT-3 V"'-LIM-2 04 R1 X- -- (C01835C9)

WELDS TO PENETRATION NSA B-N-1+

I RPV, 278'11", 105 DEG B13.10 730000 JET PUMP #9 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10, 'NON-Q REACTOR WELDS & BRACKETS. SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPOhTNTS ANNL"wCS N/A (FSAR TABLE 3.2-11'. (C0183509)

RPV,278-11/284-10,8142.5DEG 730100 JET POMP #9 INST LINE VT-3 VT-LIM-204 R1 X -- EXAMIEND PER AUG-12, 'SILN 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES"

(

( ANICLUS N/A (00183509)

RPV 278-11/284-10,8142.5DEG l

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 ,

PAGE: 36 REVISION: 0 INSERVICE INSFECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC XI RCEP SUPHARY EKAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV fREF. DWG, NO. XT.BN-3) 730200 JET PUMP #10 INST LINE . PENE WELD VT.3 VT-LIM.204 R1 X-a . (C0183509)

WELDS TO PENETRATION NBA B-N.1+

RPV, 278'11", 105 DEG B13.10 730300 JET PUMP #10 INST LINE VT-3 VT-LIM-204 R1 X-.. EXAMINED PER AUG.10, *NON.C REACTOR WELDS & BRACKETS. SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS AN!PJLUS N/A (FSAR TABLE 3.2-1)'. (C0183509)

RPV,278 11/284 10,a157.5DEG 730000 JET PUMP #10 INST LINE VT-3 VT. LIM-204 R1 X .. EXAMINED PER AUG-12 "SIL4 420, WE"uCS & BRACKETS. SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES" ANNULUS N/A (C0183509)

RPV.278-11/284 10,e157.5DEG 730500 JET PUMP #11 INST LINE . PENE WELD VT.3 VT-LIM.204 R1 X..- (CD183509)

WELDS TO PENETRATION N8B B-N.1+

RPV, 278'11', 285 DEG B13.10 730600 JET PUMP #11 INST LINE VT-3 VT. LIM-204 R1 X.. . EXAMINED PER AUG.10, *NON.Q REACTOR WELDS & BRACKETS SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)" (C01835091 RPV,278-11/284 10,s202.5DEG 730700 JET PUMP #11 INST LINE VT.3 VT-LIM.204 R1 X-.. EXAMINED PER AUG 12, 'SIL# 420, ,

WILDS & BRACKETS. SHROUD N/A+ INSPEC!ON OF JET PUMP SENSING I.INES" ANNULUS N/A (C0183509)

RPV,278-11/284 10,e202.5DEG 730800 - CET PUMP #12 INST LINE . PENE WELD VT.3 VT. LIM-204 R1 X... (C0183509)

WELDS TO PENETRATION N8B B.N.1+

RPV, 278'11', 285 DEG B13.10

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 37 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV iPFF. DWG NO. XI-PN-1)

,730900 JET PUMP #12 INST LINE VT-3 VT-LIM-204 R1 X- - - EXAMINED PER AUG-10 "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)" (C0183509)

RPV,278-11/284-10,4217.5DEG 731000 JET PUMP #12 INST LINE VT-3 VT-LIM-204 R1 X-.. EXAMINED PER AUG 12, "SIL# 420, WELDS & BRACKETS. SHROUD N/A+ INSPECTION CF JET PUMP SENSING LINES" ANNULUS N/A (C0183509)

RPV,278-11/284-10,8217.5DE3 731100 JET PUMP #13 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X-.- (C0183509)

WELDS TO PENE'11tATION NSB B-N-1+

RPV, 278'11", 285 CEG B13.10 731200 JET PUMP #13 INST LINE VT-3 VT-LIM-204 R1 X-- - EXAMINED PER AUG-10, *NON-Q REAC."rOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)" (C0183509)

RPV,278-11/284-10,e232.5DEG 731300 JET PUMP #13 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-12, "SIL# 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES"

, ANNULUS N/A (C0183509)

' RPV,278-11/284-10,e232.5DEG 731600 JET PUMP #14 INST LINE . PENE WELD VT-3 VT-LIM-204 R1 X-.- {C0183509)

WELDS TO PENETRATION N8B B-N-1+

RPV, 278'11", 285 DEG B13.10 131500 JET PUMP #14 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)" (C0183509) f RPV,278-11/284-10,8247.5DEG

\

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PACE: 39 REVISION: 0 INSERVICE INSFECTION SLHMARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMJONENTS I

NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REVARKS RPV 'REF. DWG. NO. XI.BN-31 731600 JET PUMP #14 INST LINE VT.3 VT-LIM-204 kl X- . - EXAMINED PER AUG.12, 'SIL# 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SEN$1NG LINES" ANNULUS N/A (C0183509)

RPV,278-11/284 10,s247.5DE3 731700 JET PUMP #15 INST LINE - PENE WELD VT.3 VT-LIM.204 R1 X. . - (C0183509)

WELDS TO PENETRATION N8B B-N.1+

RPV, 278'11", 285 DEG B13.10 731800 JET PUMP #15 INST LINE VT.3 VT. LIM-204 R1 X-.. EXAMINED PER AUG.10, "NON.Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2 1)". (C0183509)

RPV,278-11/284-10,8262.5DEG 731900 JET PUMP #1b INST LINE VT.3 VT-LIM-2 04 R1 X..- EXAMINED PER AUG-12, 'SIL# 420, WELDS & BRACKETS. SHROUD N/A+ INSPECTION CF JET PUMP SENSING LINES" ANNULUS N/A (C0183509)

RPV,278 11/284-10,E262.5DEG 732000 JET PUMP #16 INST LINE - PENE WELD VT.3 VT-LIM-204 R1 X... (CC183509)

WELDS TO PENETRATION N89 B-N-1+

RPV, 278'118, 285 DEG B13.10 732100 JET PUMP #16 INST LINE VT-3 VT-LIM-204 R1 X. - EXAMINED PER AUG.10, 'NON-Q REACTOR ,

WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNULUS N/A (FSAR TABLE 3.2-1)*. (C0183509)

RPV,278-11/284 10,6277.5DEG 732200 JET PUMP #16 INST LINE VT-3 VT-LIM-204 R1 X-. - EXAMINED PER AUG-12, 'SILW 420, INSPECTION OF JET PUMP SENSIN3 LINES. j WELDS & BRACKETS. SHROUD N/A+

ANNULUS N/A (CC183509)

RPV,278-11/284-10,s277.5DEG

DATE: 08/20/99 LIMERICK CENERATING STATION UNIT 2 . PACEt 39 REVISION: C INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OL7 AGE (99RF) i CIASS 1 CAUEP STATUS COMPOhTNTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (RFF DwG. NO. XI-BM-31 732300 JET PUMP #17 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X--- (C0183509)

WELDS TO PENETRATION N8B B+N-1+

RPV, ? 8'11", 285 DEG B13.10 732400 JET PUMP #17 INST LINE VT-3 VT LIM-204 R1 X--- EXAMINED PER AUG-10, "NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL IhiERNAL COMPObThTS ANNULUS N/A (FSAR TABLE 3.2 1)". (C0183509)

RPV,278-11/284-10,8292.5DEG 1

732500 JET PUMP #17 INST LINE VT-3 VT-LIM-204 R1 X.-. EXAMINED PER AUG.12, "SIL# 420. I WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES" ANNULUS N/A (C0183509)

RPV,2 78 -11/2 84 -10, a2 92 . 5DEG 732600 JET PUMP #10 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X.-- (C0183509)

WELDS TO PENETRATION NBB B-N-1+

RPV, 278'11", 285 DEG B13.10 732700 JET PUMP #18 INST LINE VT-3 VT-LIM-204 El X- - EXAMINED PER AUG-10, "NON-O REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONEhTS ANNULUS N/A (FSAR TABLE 3.2-1)". (00183509)

. RPV,27 8-11/2 84 -10,8307,5DEG 732800 JET PUMP #18 INST LINE W-3 VT-LIM-204 R1 X-.. EXAMINED PER AUG-12, "SILW 420, e

WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES" ANNUI,US N/A (C0183509)

RPV,278-11/2 84 10,83 07. 5DEG j

732900 JET PUMP #19 INST LINE - PENE WELD VT-3 VT. LIM 204 R1 X... (C0183509)

WELDS TO PENETRATION NSB B-N-1+

RPV, 278'11", 285 DEG B13.10

r 1 I

l FATE : 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 40 REVISION: 0 INSERVICE INSPECTION SUMFNtY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RP) l CLASS 1 CAUEP STATUS COMPOhTh*IS l

NR R ASME OEOE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS l PPV ' PEF. DWG. NO. XI-BN-31 j 733000 JET PUMP #19 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10, 'NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS l

ANNULUS N/A (FSAR TABLE 3.2-1)". (C0183509)

RPV,278-11/284-10,s322.5DEG l

l 733100 JET PUMP #19 INST LINE VT-3 VT-LIM-204 R1 X.-- EXAMINED PER AUG-12, "SIL# 420, WELDS & BRACKETS-SHROUD N/A+ INSPECTION OF JET PUMP SENSING LINES

• ANNULUS N/A (C0183509)

RPV,278 11/284-10.8322.5DEG l

73320D JET PUMP #20 INST LINE - PENE WELD VT-3 VT-LIM-204 R1 X... (C01835C9)

WELDS TO PENETRATION N8B B-N-1+

RPV, 278'11*, 285 DEG B13.10 i

i 733300 JET PLHP #20 INST LINE VT-3 VT-LIM-2 04 R1 X--. EXAMINED PER AUG-10, *NON-Q REACTOR WELDS & BRACKETS-SHROUD N/A+ PRESSURE VESSEL INTERNAL COMPONENTS ANNUI,US N/A (FSAR TABLE 3.2-1)" (C0183509)

RPV,278-11/284-10,8337.5DEG 733400 JET PUMP #20 INST LINE VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-12, 'SIL# 420, WELDS & BRACKETS-SKROUD N/A+ INSPECTION CP 7ET PLHP SENSING L! HTS" ANNULUS N/A (C0183509)

RPV,278-11/284-10,8337.5DEG I

e PPV (PEF. DWG NO- XI-BN-41 733500 JET PUMP 81 (N2A) VT-3 VT-LIM-204 R1 X--. (CC183509) l 1

JET PUMP ASSEMBLIES & WELDS B-N-1+

l RPV,276-4/295 8,822.5 DEG B13.10 733600 JET PUMP #1 HOLD DOWN BEAM UT-0 GE-UT-504V5 X-.. EXAMINED PER AUG-04, NUREG/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUPM ASSEMBLY FAILURE" (C0183509)

RPV,276-4/295 8,s22.5 DEG N/A l

l l

l

DATE: 08/20/99 ' LIMERICX CENERATING STATION UNIT 2 . PAGE: 41 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTA3E 199RP)

CIASS 1 CAUEP STATUS COMPCNENTS NR R ASME OEGE SEC. XI RCEP SUM 4ARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV fREF, 11WG . NO XI-EN-4)

,733700 JET PUMP #2 (N2A) VT-3 VT-LIM-204 R1 X-.- (C0183509)

JET PUMP ASSEMBLIES & WELDS B N-1+

RPV,276-4/295-8,e37.5 DE3 B12.10 733800 JET PUMP #2 HOLD DOWN BEAM UT.0 GE-UT-504V5 X--- EXAMINED FER AUG-04, NUREG/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE *. IC0183509)

RPV,276-4/295-8,837.5 DEG N/A 734000 JET PUMP #3 (N2B) VT-3 VT-LIM-204 R1 X- .. (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,e52.5 DEG B13.10 734100 JET PUMP #3 HOLD DOWN BEAM UT-0 CE-L*f-5 04V5 X--- EXAMINED PER AUG-04, NURE3/CR-3052, *BWR JET PUMP ASSEMBLT N/A+ JET PUMP ASSEMBLY FAILURE * (C0183509)

RPV,276-4/295 8,s52.5 DE3 N/A 734200 JET PUMP #4 (N2B) VT-3 VT-LIM-204 R1 X--- (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N.1+

RPV,276-4/295-8,e67.5 DE3 B13,10

,734300 JET PUMP #4 HOLD DOWN BEAM UT-0 GE-UT-504V5 X--- EXAMINED PER AUG-04, FJRE3/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE' (C0183509)

RPV,276-4/295-8,sE7.5 DE3 N/A e

734600 JET PUMP #5 (N2C) VT-3 VT-LIM-204 A1 X-- -

(C0183509)

JET PUMP ASSEMBLIES & WELDS B N 1+

RPV,276-4/295-8,e82.5 DE3 B13.10 734700 JET PUMP #5 HOLD DOWN BEAM UT-0 CE-UT-504V5 X--. EXAMINED PER AUG-04, NUREG/CR-3052, "BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE' (C0183509)

RPV,276 4/295-8,682.5 DEG N/A

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE 42 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT l

l FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99ET)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PRCCEDURE CRMR REMARKS EPV (PFF DWG NO. Xf-9N-4)

"834800 JET PDMP #6 (N2C) VT-3 VT-LIM-204 R1 X--- (00183509)

JET PLHP ASSEMBLIES & WELDS B-N-1+

RPV,276-4 /295 8,497.5 DEG B13.10 736900 JET PUMP #6 HOLD DOWN BEAM UT-0 GE-ITI-504VS X--. EXAMINED PER AUG-04, NUREG/CR-3052, *BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE" (C0183509)

RPV,276-4/295-8,e97.5 DEG N/A 735100 JET PUMP #7 (N2D) VT-3 VT-LIM-104 R1 X--- (CC183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV 276-4/295-8,8112.5 DEG B13.10 735200 JET PUMP #7 HOLD DOWN BEAM UT-0 GE-UT-5L4VS X-.. EXAMINED PER AUG-04, NUREG/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE * (C0183509)

RPV.276-4/295-8,8112.5 DEG N/A 735300 JET PUMP #8 (N2D) VT-3 YT-LIM-204 R1 X-.. (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,8127.5 DEG B13.10 735400 JET PUMP #8 HOLD DOWN BEAM UT-0 GE-UT- 5 04 V5 X--. EXAMINED PER AUG-04, NUREG/CR-3052, 'BWR

• JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURES' (C0183509)

RPV,276-4/295-8,8127.5 DE3 N/A 735600 JET PUMP #9 (N2E) VT-3 VT-LIM-204 R1 X--- (C0183509)

JET PUMP ASSEMBLIES & WELDS B N 1+

RPV,276-4/295 8,8142.5 DEG B13.10 735700 JET PUMP #9 HOLD DOWN BEAM L'r- 0 GE-UT-504V5 X--- EXAMINED PER AUG-C4, NUREG/CR-3052, 'BWR JET PLMP ASSEMBLY N/A+ JET PUMP ASSELNLY FAILURE" (C0183509)

RPV.276-4/295 8,s142.4 DEG N/A

i l

l j

CATE: C8/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 43 l

j REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPCRT FIRST INTERVAL, THIRD PERICD, SECOND OUTAGE (99RF)

CIASS 1 CAUEP STATUS COMPOhTNTS NR R i ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO )

NUMBER IDENTIFICATION ITEM N3 METHOD PROCEDURE CRMR REMARKS l

t -

PPV (PEF DWG. NO. XI-BN.41

,735800 JET PUMP #10 (N2E) VT-3 VT-LIM-204 R1 X-. - (C0183509)

JET PUMP ASSEMBLIES & WELDS B.N.1+

RPV,276-4/295-8.8157.5 EEG B13.10 735900 JET PUMP #10 HOLD DONM BEAM UT-0 CE-UT 504V5 X. . EXAMINED PER AUG-04, NUREG/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE" (C0183509) l RPV,276-4 /295-8,8157.5 DEG N/A l

736100 JET PUMP #11 (N2F) VT-3 VT-LIM-204 R1 X. .- (C0183509) l JET PUMP ASSEMBLIES & WELDS B-N-1+

r

RPV,276-4 /295-8 *,202.5 DEG B13.10 736200 JET PUMP #11 HOLD DOWN BETJ4 UT-0 GE-L7-504V5 X-.. EXAMINED PER AUG-04, NUREG/CR-3052, 'BWR

[

JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE * (C0183509)

RPV,276 4/295-8,a202.5 DEG N/A 736300 JET PUMP #12 (N2F) VT.3 VT.11M 204 R1 X--- (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,6717.5 CEG B13.10 l

l

,736400 JET PUMP #12 HOLD DOWN BEAM L7-0 GE-UT- 5 04 V5 I. - EXAMINED PER AUG-04, NUREG/CR-3052, 'EWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE" (C0183509)

( RPV.276 4/295-4,6217.5 DEG N/A e

736600 JET PUMP #13 (N20) VT-3 VT-LIM-204 R1 X-.. (C0183509) i JET PUMP ASSEMBLIES & WELDS B-N-1+

kPV,276-4/295-8,8232.5 DEG B13.10 )

l 136700 JET PUMP #13 HOLD DOWN BEAM UT.0 GE.UT-5 04 V5 X--- EXAMINED PER AUG-04, NUREG/CR-3052, ' SWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE" (C0183509)

RPV,276-4/295-8 s232.5 DEG N/A i

i

LIMERICK GENERATING STATION UNIT 2 PAGE: 44 DATE: 08/20/99 .

REVISION: 0 INSERVICE INSPECTION SWEARY REPORT FIRST Ih7ERVAL, THIRD PERICD, SECOND OUTAGE (99EP)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV GEF DWG. NO. XI-BN-4) 736800 JET PUMP #14 (N2G) VT 3 VT-LIM-204 R1 X - - - (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295 8,e247.5 DEG B13.10 L7- 0 GE-UT-504V5 X- -- EXAMINED PER AUG-04, NUREG/CR-3052, *BWR 736900 JET PUMP #14 HOLD DOWN BEAM JET PUMD ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE *. (00183509)

RPV,276-4/295 8,9247.5 DEG N/A 737100 JET PUMP #15 (N2H) VT-3 VT-LIM-204 R1 X--- (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,6262.5 DEG B13.10 UT-0 GE-Li-504V5 X- -. EXAMINED PER AUG-04, NUREG/CR-3052, 'BWR 737200 JET PUMP #15 HOLD DOWN BEAM JET PUMP ASSEMBLY N/A+ JET P'.EP ASSEMBLY FAILURE * (C0183509)

RPV,276-4/295-8,8262.5 DE3 N/A 737300 JET PUMP #16 (N2H) VT 3 VT-LIM-204 R1 X--- (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N 1+

RPV,276-4/295-8,4277.5 OEG B13.10 UT.0 GE UT-504V5 X. - . EXAMINED PER AU3-04, NURE3/CR-3052,

• BWR

• 737400 JET PUMP #16 HOLD DOWN BEAM JET PUMP ASSEMPLY N/A+ JET PUMP ASSEMBLY FAILURE * (C0183509)

RPV,276-4/295 8,a277.5 DE3 N/A 737600 JET PUMP #17 (N2J) VT-3 VT-LIM 204 R1 X- - - (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,s292.5 DEG B13.10 737700 JET PUMP #17 HOLD DOWN BEAM UT-0 GE-UT.504V5 X... EXAMINED PER AU3-04, NURE3/CR 3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE * (C0183509)

RPV,276-4/295 8,6292.5 DEG N/A J

I

1 DATE: 08/20/99 LIMERICK GENERAU N3 STATION UNIT 2 . PAGE: 45 REVISION: 0 INSERVICE INSPECTION SONARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTA3E (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SLW ARY EXAMINATION AREA CAT 3Y EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCE TJRE CRMR REMARKS e

PPV ' PEF. DW3. NO. KI-PN-4)

,737800 JE. PUMP #18 (N2Jr VT 3 VT-LIM-204 R1 X-- - (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,8307.5 DE3 B13.10 747900 JET PUMP #18 HOLD DOWN BEAM UT-0 CE-UT-504V5 X-+ - EXAMINED PER AU3-04, NUREG/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMBLY FAILURE" (C0183509)

RPV,276-4/295-8,8307.5 DE3 N/A 738100 JET PUMP #19 (N2K) VT-3 VT-LIM-204 R1 X- - (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N-1+

RPV,276-4/295-8,e322.5 DE3 B13.10 738200 JET PUMP #19 HOLD DCWN BEAM UT 0 GE-UT-504V5 X -- EXAMINED PER AU3-04, NUREG/CR-3052, 'BWR JET PUMP ASSEMBLY N/A+ JET PUMP ASSEMELY FAILURE" (C0183509)

RPV,276 4 /295-8,8322.5 DE3 N/A 738300 JET PUMP #20 (N2K) VT-3 VT-LIM-2 04 R1 X--- (C0183509)

JET PUMP ASSEMBLIES & WELDS B-N 1+

RPV,276-4/295-8,8337.5 DEG B13.10

,738400 JET PUMP #20 HOLD DOWN BEAM ITT- 0 GE-UT-504V5 X--- EXAMINED PER AU3-04, NURE3/CR-3052, 'BWR JET PUMP AS';EMBLY N/A+ JET PUMP ASSEMBLY FAILURE *. (C01835091 RPV,276-4/2 95-8,8337. 5 DE3 N/A e

738551 JET PUMPS #11 & #12 EVT-1 VT-LIM-204 R1 X--- EXAMINED WELDS RS-1, RS 2 & RS.3 USING RISER BRACE ARM ASSEMBLY WELDS N/A B'RVIP-41, m " JET PUMP ASSEMBLY INSPECTION

& WELD TO INLET MIXER N/A AND FLAW EVALUATION GUIDELINES" RPV,291-4.5,s203 & 217 EE3 REFERENCE AUG-SIL# 551, " JET PUMP RISER BRACE CRACKIN3" (C0183509) 738561 JET PUMPS #13 & #14 EVT-1 VT-LIM-204 R1 X..- EXAMINED WELDS RS-1, RS-2 & RS-3 USIN3 RISER BRACE ARM ASSEMBLY WEI.DS N/A BWRVIP-41, " JET PUMP ASSEMBLY INSPECTION

& WELD TO INLET MIXER N/A AND FIAW EVALUATION GUIDELIhTS*

RPV,291-4.5,s233 & 247 DE3 REFERENCE AU3-SIL# 551, ' JET PUMP RISER BRACE CRACKIN3*. (C0183 509)

I DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 .

PACE: 46 REVISION: 0 INSERVICE INSPECTION SUPNARY REPORT FIRST INTERVAL, THIRD PERIOD, EECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV ' PEF. DWO. NO. XI-BN.4)

EXAMINED WELDS RS-1, RS-2 & kS-3 USING *

-738571 JET PUMPS #15 & #16 EVT-1 VT. LIM-204 R1 X---

RISER BRACE ARM ASSEMBLY WELDS N/A BWRVIP.41, ' JET PUMP ASSEMBLY INSPECTION

& NELD TO INLET MIXER N/A AND FLAW EVALUATION GUIDELINES *.

RPV,291-4.5,s263 & 277 REG REFERENOE AUG-SIL# 551, " JET PUMP RISER BRACE CRAOKING". (C0183509) 738501 JET PUMPS #17 & #18 EVT-1 VT-LIM-204 R1 X... EXAMINED WELDS RS-1, RS-2 & RS-3 USING RISER BRACE ARM ASSEMBLY WELDS E/A BWRVIP.41, " JET PUMP ASSEMELY INSPECTION

& WELD TO INLET MIXER N/A AND FLAW EVAI.UATION GUIDELINES'.

RPV,291-4.5,s293 & 307 DEG REFERENCE AUG-SIL# $51, ' JET PUMP RISER BRACE CRACKING *. (C0183509) 738591 JET PUMPS #19 & #20 EVT 1 VT-LIM-204 R1 X... EXAMINED WE'DS RS-1, RS-2 & RS-3 USING RISER BRACE ARM ASSEMBLY WELDS N/A BWRVIP 41, " JET PUMP ASSEMBLY INSPECTION

& WELD TO INI.ET MIXER N/A AND FLAW EVALUATION GUIDELINES

• RPV,291-4.5,s323 & 337 DEG REFERENCE AUG-SIL# 551, " JET PUMP RISER BRACE CRAOKING" (C0183509) 738600 ACCESS HOLE COVER {0 DEG) EVI-1 VT-LIM-204 R1 X-.. EXAMINATION INCLUDED EVT.1 IN 1.IEU OF COVER & WELD B-N-1 VT-1 USING BWRVIP-38, *SHROLT SUPPORT RPV INTR, 276'4*, O DEG. B13.10 INSPECTION AND FIAWEVALUATION RPV INTR, 276'4', O DEG. GUIDELINES". (C0183509) 738700 A00ESS HOLE COVER (180 CEG) EVT-1 VT-LIM 204 R1 X--- EXAMINATION INCLLTED EVT 1 IN LIEU OF COVER & WELD B-N-1 VT-1 USING BWRVIP.38, "SHROOD SUPPORT ,

RPV INTR, 276'4", 180 CEG. B13.10 INSPECTION AND FLAW EVALUATION RPV INIR, 276'4", 183 DEG. GUIDELINES". (C0183509)

P PV IREF. DWG. NO. XI.PN-5) 736900 IN00RE HOUSING FLANGE BOLTING VT-1 MAG-CG-4 07 R6 X.- - EXAMINED CORE LOCATIONS 40-25, 40 33, 55 INCORE HOUSING FLANGES B-G-2 40-41, 40-49, 40-57, 48-09, 48 17, 4/FNG B7.10 48 25, 48-33, 48 41, 48-49, 56-17 BH, 266'3',. 56 25, 56 33, 56-41, SRM 4 0-4 5 & IFJ4 48-13, 48 53 INAOCESS"1E DUE TO INSTAL 1ATION. (C0188856.

.DATE 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 47 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO l NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

FPV rPEF DwC. NO XI-BN-5)

,139000 INCORE DETECTORS (55) VT-3 VT-LIM-204 R1 X--- EXAMINED DETECTORS 24-29 & 32-29 FROM 55 DETECTORS BY CORE POSITION B-N-1+ FUEL CELL LOCATION 30-31. (C0183509)

RPV INTR, 296'9*,. B13.10 739090- INCORE DRY TUBE (24-29) VT-1 VT-LIM-204 R1 X-.. EXAMINED UPPER 2 FEET OF DRY TUBE PER IRM INCORE DRY TUBE N/A+ AUG-11, SIL# 409, *INCORE DRY TUBE N/A CRACKS" (C0183509) 739120 INCORE DRY TUBE (32 29) VT-1 VT-LIM-204 R1 X--- EXAMINED UPPER 2 FEET OF DRY TLTE PER IRM INCORE DRY WBE N/A+ AUG-11, SIL# 4 09, *INCORE DRY TUBE N/A CRACKS". (C0183509) 739200 INCORE GUIDE TUBES (55) VT-3 VT-LIM-204 R1 X-.. EXAMINED INCORE GUIDE TUBE AND 55 GUIDE TUBES & STABILI2ER N/A+ STABILIZER AT FUEL CELL IDCATION 30-31 ASS N/A PER AUG-10, *NON-Q REACTOR PRESSURE RPV INTR, 270'5' - 298' VESSEL INTERNAL COMPONENTS (FSAR TABLE 3.2-1)*. (C0183509) 739300 INCORE HOUSINGS (55) VT-3 VT-LIM-204 R1 X-- - EXAMINED HOUSINGS AT CORE LOCATIONS 55 HOUSINGS BY CORE POSITION B-N-1 24 29 & 32-39. (C0183509) kPV INTR, 266'3" . 270'S',- 213.10 e

739400 INCORE HOUSIN3 TO RPV WELD VT-3 VT-LIM-204 R1 X--

• EXAMINED WELOS AT CORE LOCATIONS 24-29 6 (55) IN-CORE DE*"ECTORS B-N 2 32-39. (C0183509)

RPV INTR, 266'3", - B13.30 PPV (PEF. DWG. NO. XI EN-6) 139700 CRD HOUSING FIANGE BOLTING VT-1 MAG-CG-407 R6 XX-X EXAMINED BOLTING FROM CELLS: 06-23, 185 CRD HOUSING FIANGES 8/FLNG B-G-2 06-31, 06 43, 22-07, 22 27, 22-55.

BH, 266'3", - B7.80 26 27, 26-35, 26-51, 30 03, 30-31, EH, 266'3", . 30-43, 38-55, 42 27, 46 07, 46-11, 54-23, 54-39, 58-23, 58-27, 58-31. SEE SECTION NO.2 FOR REPORTABLE CONDITIONS.

r DATE: 08/20/99 LIMERICK GENERATIN3 STATION UNIT 2 . PAGE: 48 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OITTAGE 199RF)

CLASS 1 CAUEP STATUS COMPONE!f?S NR R ASME OEGE SEC. XI RCEP SLMIARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV IREF. DWG. No, XI.BN-6) 740000 CRD CORE SUPPORT STRUf"URE VT.3 VT. LIM-204 R1 X... EXAMINED ACCESSIBLE SURFACES OF 26-27 185 GUICE TUBES & CRD HOUSINGS B-N-2 FROM ID AND 30 31 FROM OD. (CC183509)

RPV INTR, 266'3*.283'6", . B13.4 0 740200 CRD STUB TUBE TO RPV WELD VT.3 VT-LIM-2 04 R1 X-.. EXAMINED AT CORE LOCATIONS 30-31, 30 35, (185) CRD HOUSINGS B-N-2 26-31 & 34-31. (C0183509)

RPV INTR, 266'3', . B13.40 RPV (PEF. DWO. No XT.PN-H 740300 TCP GUIDE ASSEMBLY VT.3 VT-LIM-204 R1 X.. . EXAMINED TOP SURFACES AT CELL I40ATIONS WELDS & SURFACES B-N-1+ 26 27 & 30 31. (C0183509)

RPV IhTR, 298', . B13.10 740500 TOP GUIDE RADIAL RESTRAINT VT.3 VT. LIM-204 R1 X. .. EXAMINED RADIAL RESTRAINTS, 32 WEDGES, 32 WEDGES, BOLTS, & KEEPERS B-N.1 BOLTS, AND KEEPERS, (C0183509)

RPV INTR, 2988, . EI3.10 740600 CORE PLATE VT.3 VT-LIM-204 R1 X... EXAMINED AT CORE FLATE LOCATION 30-31.

WELDS & SURFACES B.N-1 (C0183509)

RPV IFTR, 283'6", - B13.10 7407C0 CORE SUFPORT BOLTING VT-3 VT. LIM-204 R1 X... EXAMINED BOLT ASSEMBLIES 1 THRU 5, 7 34 STUDS, 68 NUTS & WASHERS B-N-1 THKU 10, 12 THRU 19, 21 AND 22, 24 THRU .

RPV INTR, 283'6*,- 313.10 27, 30 AND 31. (C0183509) i

)

740800 CRIFICED FUEL SUPPORT (185) VT.3 VT. LIM.204 R1 X... EXAMINED AT CELL LOCATIONS 26 27 &

185 CASTINGS SY CORE POSITION B.N.1 30-31, (C0183509)

RPV INTR, 283'6", . S13.10 l

l RPV fREF. DWG. NO. XI.PN-91 744600 FEEDWATER SPARGER N4A VT.3 VT-LIM-204 R1 X. .. EXAMINED PER AUG.10, 'NON-Q REACTOR SPARGER ASEEMBLY & (4) N/A. FRESSURE VESSEL INTERNAL COMPOhTNTS BRACKETS N/A (FSAR TABLE 3.2 1)' (C0183509)

RPV, 307 9.5,8 5-55 DEG

DATE: -08/20/99 LIMERICK GENERATING STATION UNIT 2 , PAGE: 49 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL. THIRD PERIOD, SECOND OITIAGE (99RF)

CIASS 1 CAVEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SIDEARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

PPV O EF . DWG. NO. XI.PN.91

,744700 FEEDWATER SPARGER N4A VT.3 VT-LIM-204 R1 X.. . EXAMINED PER AUG-2, 'NUREG-0619, BWR SPARGER ASSEMBLY & (4) N/A+ FEEDWATER NOZZLE CRACKING" (C0183509)

BRACKETS N/A RPV, 307 9.5,8 5-55 DEG 744800 FEEDWATER SPARGER N48 VT-3 VT. LIM-204 R1 X... EXAMINED PER AUG-10, "NON-Q REACTOR SPARGER ASSEMBLY & (4) N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2-1)*. (C0183509)

RPV, 307 9.5,e 65 115 DEG 744900 FEEDWATER SPARGER N4B VT-3 VT. LIM-204 R1 X-.. EXAMINED PER AUG.2, 'NUREG-0619 BWR SPARGER ASSEMBLY & (4) N/A+ FEEDWATER N0ZZLE CRACKING". (C0183509)

BRACKETS N/A RPV, 307-9.5,e 65 115 DEG 745000 FEEDWATER SPARGER N4C VT-3 VT. LIM 204 R1 X-.. EXAMINED PER AUG.10, "NON-Q REACTOR SPARGER ASSEMBLY & (4) N/A+ PP. ESSURE VESSEL IFPERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2 1)" (C0183509)

RPV, 307 9.5.e 125 175 DEG 745100 FEEDWATER SPARGER N4C VT.3 VT. LIM-204 R1 X... EXAMINED PER AUG-2, 'NUREG.0619, BWR

, SPARGER ASSEMBLY & (4) N/A+ FEEDWATER NOZZLE CRACKING" (C0183509)

BRACKETS N/A RPV, 307 9.5,8 125 175 DE3 e

745200 FEEDWATER SPARGER N4D VT 3 VT-1.IM.2 04 R1 X.. . EXAMINED PER AUG-10, *NON.Q REACTOR SPARGER ASSEMBLY & (4) N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2 1)". (C0143509)

RPV, 307 9.5,e 185 235 CEG 745300 FEEDWATER SPARGER N4D VT.3 VT-LIM.204 R1 X... EXAMINED PER AUG-2, "NUREG-0619, BWR SPARGER ASSEMBLY & (4) N/A+ FEEDWATER NOZELE CRACKING" (C0183509)

BRACKETS N/A RPV, 307 9.6 e 185 235 DEG A

DATE: C8/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 50 REVISION: 0 INSERVICE INSFECTION

SUMMARY

RE*CRT FIRST INTERVAL, THIRD PERIOD, SECCND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDLTE CRMR REMARKS PPV (PFF DWG. NO. XI-BN-91 745400 FEEDWATER SPARGER N4E VT-3 VT. LIM +204 R1 X-.- EXAMINED FER AUG-10, 'NON-Q REACTOR SPARGER ASSEMBLY E (4) N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BRACKETS N/A (FSAR TABLE 3.2 1)". (C0183509)

RPV, 307-9.6,8 245-295 DEG 745500 FEEDWATER SPARGER N4E VT-3 VT-LIM-204 R1 X-- - EXAMIN R FER AUG-2, *NUREG-0619, BWR SPARGER ASSEMBLY & (4) N/A+ FEEDWATER NCZZLE CRACKING" (C0183509)

BRACKETS N/A RPV, 307-9.5 e 245-295 DEG 705600 FEEDWATER SPARGER N4F VT 3 VT. LIM-204 R1 X- -- EXAMINED PER AU3-10, 'NON-Q REACTOR SPARGER ASSEMBLY & (4) N/A+ PRESSURE VESSEL INTERNAL COMPCNENTS BRACKETS N/A (FSAR TABLE 3.2-1)". (C0183509)

RPV, 307 9.5,8 305 355 DEG 745700 FEEDWA*ER $FARGER N4F VT-3 VT-LIM-204 R1 X- .- EXAMINED PER AUG-2, 'NUREG.0619, BWR SFARGER ASSEMBLY & (4) N/A+ FEEDWATER NO22LE CRACKING" (C0183509)

BRACKETS N/A RPV, 307-9.5,8 305-355 DEG 745800 N4A SPARGER BRACKET (5 DEG) VT 3 VT-LIM-204 R1 X.-- (C0183509)

BRACKET WELD TO RPV B-N-2 RPY, 307-9.5,8 5 DEG B13.30

+

745900 N4A SFARGER BRACRET (55 DEG) VT-3 VT-LIM-204 R1 X- -- (C0183509)

BRACKET WELD TO RPV B-N-2 RPV, 307-9.5 e 55 DEG B13.30 106000 N48 SFARGER BRACKET (65 DE0' VT-3 VT-LIM-204 R1 X.-. (C0183509)

BRACKET WELD TO RPV -N-2 RPV, 307-9.5,6 65 DEG i13.30

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 51 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE 199RF)

CLASS 1 CAUEP STAWS COMPONENTS NR R ASME OEGE SEC. XI RCEP SU)MAttY EXAMINATION AREA CAW Y EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

PPV IPEF. DWG. NO XI.BN-9)

,746100 N4B SPARGER BRACKET (115 DEG) VT.3 VT. LIM-204 R1 X--- (C0193509)

BRACKET WELD TO RPV B.N.2 RPV, 307 9.5,8 115 UEG B13.30 746200 N4C SPARGER BRACKET (125 DEG) VT-3 VT. LIM.204 R1 X- -- (C0183509)

BRACKET WELD TO RPV B-N-2 kPV, 307 9.6,e 125 DEG B13.30 j

. \

146300 N4C SPARGER BRACKET (175 DEG) VT.3 VT. LIM 204 R1 X .- (C0183509)

BRACKET WELD TO RPV B-N.2 RPV, 307 9.5,8 175 DEG B13.30 746400 N4D SPARGER BRACKET (185 DEG) VT 3 VT. LIM-204 R1 X--. (C0183509)

BRACKET WELD TO RPV B-N 2 RPV, 301 9.5,8 185 DEG B13.30 746500 N4D SPARGER BRACKET (235 CEG) VT.3 VT. LIM-204 R1 X.-- (C0183509)

BRACKET WELD TO RPV B.N-2 RPV, 307 9.5,e 235 DEG B13.30

,746600 N4E SPARGEh BRACKET (245 DEG) VT.3 VT. LIM.204 R1 X.-- (C0163509)

BRACKET WELD TO RPV B-N-2 RPV, 307-9.5,0 245 DEG B13.30 e

746700 N4E SPARGER BRACKET (295 DEG) VT.3 VT. LIM-204 kl 2--. (C0163509)

BRACKET WELD TO RPV B.N-2 RPV, 307-9.5,e 295 DEG B13.30 746600 N4F SPARGER BRACKET (305 DEG) VT-3 VT-LIM-204 R1 X.-- (C0183509)

BRACKET WELD TO RPV B-N.2 RPV, 307 9.5,e 305 DEG B13.30 l

i I

e DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 PAGE: $2 i

REVISION: 0 INSERVICE INSPECTION SO94ARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP SumARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV iPEP DWG. NO XI-RN-91 746900 N4F SPARGER BRACKET (355 DEG) VT-3 VT-LIM-204 R1 X-.. (C0183509)

BRACKET WELD TO RPV B-N-2 RPV, 307-9.5,a 355 DEG B13.30 PPV iPrF DWG. NO XI-PN-101 747000 SHROUD ANNULUS VT-3 VT-LIM-204 R1 X.-. (C0183509)

SURFACE B-N-1 RPV,276 4/300 0, CIRC B13.10 747100 SHROUD WELD H1 VT.3 VT-LIM-204 R1 X- -

EXAMINED WITH MICRO TOMO ACQUISITION &

E7RFACE B-N-1 UT-45S GE-UT-503V8 .XXX TOMO VIEW CATA ANALYSIS SYSTEMS. TOTAL RPV INTR. 276,4'-300', B13.10 UT.60L GE-UT-503VB .XXX ACCESSIBLE WELD LENGTH SCANNED = 57.4%

RPV INTR, 276,4*.300', UT-CDCR GE UT-503V8 .XXX ON PIATE SIDE OF WHICH 34.3% WAS FOUND FLAWED ON CD & 32.0% WAS FOUND FLAWED ON ID. DISPOSITION, "USE-AS-IS' PER NCRW LG 99-01153, 747200 SHROUD WELD HI VT-3 VT-LIM-204 R1 X... EXAMINED WITH MICRO TOMO ACQUISITION &

SURFACE BN1 UT-455 GE-CT-503V8 .XXX TOMO VIEW CATA ANALYSIS SYSTEMS. TOTAL RPV INTR, 276,4".300', B13.10 UT-6 0L GE UT-503VB -XXX ACCESSIBLE WELD LENGHT SCANNED = 57.4%

RPV INTR, 276,4*.300', UT-CDCR GE-UT-503V8 -XXX 01. PLATE SIDE OF WHICH 39.54 WAS FOUND FLAWED ON SHROUD ID. DISPOSITION,

'USE-AS-IS' PER NCRW LG 99-01153.

747300 SHROUD WELD H3 UT-45S GE-UT-503VB -XXX EXAMINED WITH MICRO TOMO A00UISITION &

SURFACE B-N-1 UT-6CL GE-UT-503V8 .XXX TOMO VIEW DATA ANALYSIS SYSTEMS. TOTAL RPV INTR, 276,4".300', B13.10 UT-CDCR GE-UT.503VB -XXX ACCESSIBLE WELD LENGTH SCANNED = 61.5%

RPV INTR, 276,4'.300', ON PLATE SIDE OF WHICH 30.7% WAS FOUND FLAWED ON OD & 37.8% WAS FOUND FLAWED ON ID. DISPOSITION, *USE-AS-IS' PER NCR8 LG 99-01153.

747400 SHROUD WELD H4 UT.4 5S GE-UT-503VB .XXX EXAMINED WITH MICRO TOMO ACQUISITION &

SURFACE B-N-1 UI.60L GE UT-503V8 .XXX TOMO VIEW DATA ANALYSIS SYSTEMS. TOTAL RPV INTR, 276,4*-300', B13 10 UT-CDCR GE UT.503V8 .XXX ACCESSIBLE WELD LENGTH SCANNED = 61.8%

RPV INTR, 276,4".300', ON UPPER SIDE OF WHICH 26.1% WAS FOUND FLkWED & 60.6% ON IDWER SIDE WITH NO FLhWS FOUND. DISPO., 'USE.AS.IS* PER NCR# LG 99-01153.

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 53 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL. THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDElfflFICATION ITEM NO METHOD PROCFDURE CRMR REMARKS t ....... .............................. ....... .......... ................ .... ..................... ..................

e RPV fFFF. DWG, NO. XI-PN-IO) l ,747500 SHROUD WELD H5 UT.45S GE.UT-503V8 -XXX EXAMINED WITH MICRO TOMO ACQUISITION &

SURFACE B-N-1 UT-60L GE-UT-503V8 .XXX TOMO VIEW DATA ANALYSIS SYSTEMS. TOTAL RPV INTR, 276,4*-300', L13.10 UT-CDCR GE-UT.503V8 -XXX ACCESSIBLE WELD LENOTH SCANNED = 61.4%

RPV INTR, 276,4*-300', ON UPPER SIDE OF WHICH 1.1% WAS FOUND FLAWED ON OD & 5.0% WAS FOUND FLAWED ON ID. DISPOSITION, 'USE-AS IS" PER NCRW LG 99-01153.

747600 SHROUD WELD H6 VT-3 VT-LIM-204 R1 X*-. EXAMINED WITH MICRO TOMO ACQUISITION &

SURFACE B.N-1 UT-45S GE-UT-503V8 .XXX TOMO VIEW DATA ANALYSIS SYSTEMS. TOTAL RPV INTR, 276,4' 300', B13.10 UT-601, CE-UI-503V8 -XXX ACCESSIBI C WELD LEN3TH SCANNSD = 59.5%

RPV INTR, 276,4*.300', UT.ODCR GE-UT-503V8 -XXX ON UPPER SIDE OF WHICH 38.6% WAS FOUND FLAWED ON ID. DISPOSITION, 'USE-AS IS" PER NCR8 LG 99-01153, 7477v0 SHROUD WELD H7 UT-45S GE-UI-503V8 --X- EXAM!NED WITH MICRO TOMO ACQUISITION &

SHROUD TO SUPPORT CYLINDER B-N-2 UT-60L GE-UT-503V8 .-X. TOMO VIEW DATA ANALYSIS SYSTEMS TOTAL WELD B13.40 UT-CDCR GE-CT-503V8 ..X* ACCESSIBLE WELD LENGTH SCANNED = 57.8%

RPV INTR, 277'3, ON UPPER & IDWER SIDES AND NO FLAW INDICATIONS WERE DETECTED, (C0183509) 747800 SHROUD SUPPORT PLATE WELD E8 EVT-1 VT-LIM-204 R1 X--- EXAMINED 10% OF mA.D 1.I:NOTH IN AREAS OF

, SUPPORT PLATE TO CYLINDER WELD B-N-2 0 & 180 DEG ACCESS HOLE COVERS USING RPV INTR, 276'4*, CIRC B13.40 BWRVIP-38, " SHROUD SUPPORT INSPECTION RPV INTR, 276'4", CIRC AND FIAW EVALUATION GUIDELINE" (C0183509) e 747900 SHROUD SUPPORT PLATE WELD M9 EVT-1 VT. LIM-204 R1 X-.. EXAMINED 10% OF WELD LEN3TH IN AREAS OF SUPPORT PIATE TO RPV WELD B-N.2 0 & 180 DE3 ACCESS HCLE COVERS USING RPV INTR, 276'4', CIRC B13.40 BWRVIP 38, " SHROUD SUPPORT INSPECTION RPV INTR, 276'4', CIRC AND FLAW EVALUATION GUIDELINE.

(C0183509)

PPV TREF DW3. NO. XI-PN-11) 749400 GUIDE ROD (0 DEG) VT-3 VT-LIM-204 R1 X..* EXAMINED PER AUG.10, 'NON-Q REACTOR ROD, BRACKET & ROD FLANGE N/A+ PRESSURE VESSEI, INTERNAL COMPONENTS RPV,300-11, 327-10,40 DE3 N/A (PSAR TABLE 3.2 1)*. (C0183509)

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 54 REVISIONi 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV ' PEF. DWO. NO. XT-PN-11) 749500 GUIDE ROD (180 EEG) VT-3 VT-LIM-204 R1 X- - - EXAMINED PER AUG-10. "NCN-Q REACTOR BOD, BRACKET & RCD FLANGE N/A+ PRESSURE VESSEL INTERNAL COMPONENTS RPV,300-11, 327-10.8180 DEG N/A (FSAR TABLE 3.2-1)". (C0183509)

PPV fPEF. DWO. NO. XI-PN-129 709800 SURVEIL SPECIMEN HLDR (3 0 DEG) VT-3 VT-LIM-204 R1 X--- EXAMINED PER AUG-10. "NON-Q REACTOR EMBRITTLEMENT SAMPLE HOLDER & N/A+ PRESSURE VESSEL INTERhAL COMPONENTS BASKET N/A (FSAR TABLE 3.2-1) " (C0183509)

RPV,289-8, 299-3,s 30 DEG 769900 SURVEIL. SPECIMEN HLDR (120 DEG) VT-3 VT-LIM-204 R1 X- - - EXAMINED PER AUG-10. "NON-Q REACTOR EMBRITTLEMENT SAMPLE HOLDER & N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BASKET N/A (FSAR TABLE 3.2 1) . (C0183509)

RPV,289-8, 299-3,8 120 DEG 750000 SURVEIL. SPECIMEN HLDR (300 DEG) VT-3 VT-LIM-204 R1 X. .. EXAMINED PER AUG-10, "NON-Q REACTOR EMBRITTLEMENT SAMPLE HOLDER & N/A+ PRESSURE VESSEL INTERNAL COMPONENTS BASKET N/A (FSAR TABLE 3.2-1)*. (C01835C9)

RPV,289-8, 299-3,8 300 DEG PPV rPEF. DWO. NO. XI.PN-14%

751000 LPCI COUPLING (N17A) VT-3 VT-LIM-204 R1 X- -- EXAMINED: CLAMP BOLTS 45-6A, 85-6B.

LPCI LOOP B B-N-1 45-6C, 45-6Di NUT TACK WEI.DS 45 8A, .

RPV INTR, 2 97 ' 3 ", 4 5 DEG B13.10 45-8B, 45-8C, 45-8D; FLANGE TO THERMAL RPV INTR, 297 ' 3", 4 5 DEG SLEEVE WELD 45-12; SHROUD ATTACHMENT RING WELD 45 3B. (C0183509) 751100 LPCI COUPLING (N17B) VT-3 VT-LIM-2 04 R1 X- - - EXAMINED: CLAMP BOLTS 45-6A, 45-6B, LPCI LOOP D B-N-1 45-6C, 45-6D; NUT TACK WELDS 4 5-8 A, RPV INTR, 297'3", 135 DEG B13.10 4 5-8B, 4 5-8C, 4 5-8D FLANGE TO THERMAL RPV INTR, 297'3", 135 DEG SLEEVE WELD 45-12; SHROUD ATTACHMENT RING WEI.D 45-3B. (CC183509)

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 FACE: 55 REVISION: 0 INSERVICE INSPECTION S W.ARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF) +

l CLASS 1 CAUEP STATUS COMPONENTS NR R ME DEGE j SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO  !

NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV rREF. DWo 30. xi-gN-14) e l I

751200 LPCI COUPLING (N17C) VT.3 VT-LIM-204 R1 X..- EXAMINED: CLAMP BOLTS 45 6A, 45 6B, LPCI LOOP A B.N.1 45 6C, 45 6D; NUT TACK WELDS 45-8A, e RPV INTR, 297 '3', 225 DEG B13.10 45 8B, 45-8C, 45 8Di FLANGE TO THERMAL RPV Ih7R, 297'3", 225 DEG SLEEVE WELD 45 12; SHROUD ATTACHMENT RING WELD 45-3B. (C0183509) 751300 LPCI COUPLING (N17D) VT. 3 VT. LIM.204 R1 X..- EXAMINED: CLAMP BOLTS 45 6A, 45 68.

LPCI LOOP C B.N.1 45 6C, 45-6D; NL'T TACK WELDS 45 8A, RPV IhTR, 297'3', 315 DEG B13.10 45 8B, 45 8C, 45 8Di FLANGE TO THERMAL RPV INTR, 297'3', 315 DEG SLEEVE WELD 45-12s SHROUD ATTACHMENT RING WELD 45 3B. (C0183509)

RPV 'PFF DWG NO. XI-FA-2 PG 1-1) 757700 RPV STABILIZER (225 DE3) VT-3 MAG.CG-407 R6 X .. (C0186083)

STABILIZER ASSEMBLY & BRACKETS F.A 17C, 313'4', 225 DEG F1.40 757800 RPV STABILIZER (270 DEG) VT-3 MAG-CG.407 R6 X... (CD186083)

STABILIZER MSEMBLY & BRACKETS F.A 17C, 313'4*. 270 DEG F1.40 757900 RPV STABILIZER (315 CEG) VT-3 MAG-CG.407 R6  %... (C0186083)

STABILIZER ASSEMELY & BRACKETS F.A 13 C, 313 ' 4 * . 315 CEG F1.40 e

RPV ' PEF DWG NO. XI-FA-1 PG.1.31 758000 RPV SUPPORT VT.3 MAG.CG.407 R6 X... (C0183509)

SUPPORT SKIRT ASSEMBLY F-A RX ,260',473,0 360 F1.40 PPV 'P EF . DwG NO. XI.BN-61 758011 P1A UT-60S UT-LIM-511V4 R0 . X. EKAMINED PER AUG-03, IEB 80-13, THERMAL SLEEVE TO T-BOX WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USING NSB (300 AZ) CORE SPRAY A LOOP N/A BWRVIP 18, ' CORE SPRAY IlrTERhALS RPV INTR, 306 7.8 300 AZ INSPECTION AND FLAW EVALUATION GUIDELIhTS*. BASELINE UT EXAM *ERFORNED IN LIEU OF EVT.1. (C0185091)

LIMERICK GENERATING STATION UNIT 2 PAGE: 56 LATE: 08/20/99 .

REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPOhTNTS NR R ASME OEGE SEC, XI RCEP

SUMMARY

k.XAMINATION AREA CATGY EXAM EOOO WUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV 'RFF . DWG. NO XI.PN-81 EXAMINED PER AUG.03, IEd 80 13,

• 758021 F1B W-60S W-LIM-511V4 R0 ..X.

THERMAL SLEEVE TO T-BOX WELD N/A

• CRACKING IN CORE SPRAY SPARGERS" USING NSA (60 AZ) CORE SPRAY B LOOP N/A BWRVIP-18 " CORE SPRAY INTERNES RPV INTR, 306-7,e 60 AZ INSFECTION AND FLAW EVALUATION GUIDELINES" BASELINE W EXAM PERFORMID IN LIEU OF EVT.I. (C0185091) 758031 P2A UT-60S UT-LIM-511V4 R0 . .X. EXAMINED PER AU3-03, IEB 80-13, HEADER T BOX COVER PLATE WELD N/A UT-70S UT-LIM-511V4 R0 . -X. " CRACKING IN CORE SPRAY SPARGERS" USING CORE SPRAY A I40P N/A BWRVIP-18, ' CORE SPRAY INTERNALS RFV INTR, 306-7,8 300 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIEU OF EVT-1. (C0185091) 758041 P2B W.6 0S U'"-LIM.511V4 R0 ..X. EXAMINED PER AUG-03, IEB 80 13 HEADER T. BOX COVER PLATE WELD N/A UT-70S UT LIM.511V4 R0 . .X- ' CRACK!N3 IN CORE SPRAY SPARGERS" USING CORE SPRAY B LOOP N/A BWRVIP-18, " CORE SPRAY INTERNES RPV INTR, 306 7,8 60 AZ INSPECTION AND FLAS EVALUATION GUIDELINES *. BASELINE UT EXAM PERFORMED IN LIEU CF EVT.I. (C0185091) 758051 P3aA W.605 UT. LIM-511V4 RD .-X- EXAMINED PER AUG-03, IEB 80 13.

HEADER T-BOX TO PIPE WELD N/A " CRACKING IN CORE SPRAY SPARGERS" USING (RIGHT SIDE) N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, 306 7,8 300 A2 INSPECTION AND FLAW EVALUATION GUIOELINES" BASELINE UT EXAM PERFORVED . ,

i IN LIEU CF EVT-1. (C0185091)

J W.6 0 S UT. LIM-511V4 R0 . -X. EXAMINED PER AU3- 03, IEB 80-13, 758061 P3bA HEADER T. BOX TO PIPE WELD N/A " CRACKING IN CORE SPRAY SPARGERS* USING (LEFT SIDE) N/A BWRVIP-18, " CORE SPRAY INTERNAI.S RPV INTR, 306 7,5 300 AZ INSPECTION AND FLAW EVALUATION GUICELINES* BASE!.!NE UT EXN4 PERFORMED IN LIEU OF EVT-1. (00185091)

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 57 REVISION: 0 INSERVICE INSPECTION SUMPARY REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OWAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R 3SME OEGE SEC XI RCEP S'JfEARY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRHR REMARKS PPV rRFF. DWG NO. XT-PN-9)

,758071 P3aB UT-60S UT-LIM-511V4 R0 --X- EXAMINED PER AUG-03, IEB 80-13.

HEADER T-BOX TO PIPE WELD N/A "CRACXING IN CORE SPRAY SPARGERS" USING (RIGHT SIDE) N/A BWRVIP-18, " CORE SPRAY INTERNES RPV INTR, 306-7,4 60 AZ INSPECTION AND FLAW EVEUATION GUIDELINES". BASELINE W EXAM PERFORMED IF LIEU CF EVT-1. (C0185091) 758081 P3bB UT-60S W-LIM 511V4 RD - -X- EXAMINED PER AUG-03, IEB 80-13, HEADER T BOX TO PIPE WELD N/A ' CRACKING %N CORE SPRAY SPARGERS" USING (LEFT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV INTR, 306 7,e 60 AZ FLAW EVAIDATION GUIDELINES *. BASELINE UT EXAM PERFORMED IN LIEU CF EVT-1.

(C0185091) 758091 P4aA UT-60S UT-LIM-511V4 RO - -X- EXAMINED PER AUG-03, IEB 80-13 HEADER PIPE TO EI.90W WELD N/A " CRACKING IN CORE SPRAY SPARGERS* USING RPV INTR, 306-7,4 353.5 AZ N/A BWRVIP-18,

• CORE SPRAY IN*ERNALS RPV INTR, 306-7,e 352.5 AZ INSPECTION AND FLAW EVEUATION GUIDELINES *. BASELINE UT EXAM PERFORMED ,

IN LIEU OF EVT-1, 1C0185091) 758101 P4aB UT*60S UT-LIM-511V4 RO --X- EXAMINED PER A'JG-03, IEB 8 0-13,

, HEADER PIPE TO ELBOW WELD N/A " CRACKING IN CORE SPRAY SPAR 0ERS* USING RPV INTR, 306 7,s 7.5 AZ N/A 5WRVIP-18, ' CORE SPRAY INTERNALS RPV IWR, 306-7,8 7.5 AZ INSPECTION AND FLAW EV EUATION GUIDELINES" BASELINE UT EXAM PERFORMED 8

IN LIEU OF EVT-1. (C0185091) 758111 P4aC UT-60S UT-LIM-511V4 RD --X- EXAMINED PER AUG-03, IEB 80-13 HEADER PIPE TO ELBDW WELD N/A " CRACKING IN CORE SPRAY SPARGERS' USING RPV INTR, 306-7,e 187.5 AZ N/A BWPVIP-18, ' CORE SPRAY INTERNALS RPV INTR, 306-7,6 187.5 AZ INSPECTION AND FLAW EVEUATION CUIDELINES" BASELINE UT EXAM PERF0PNED IN LIEU CF EVT-1. (C0185091)

CATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 58 REVISION 0 INSERVICE INSPEOTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRNR REMARKS PPV ' PEF . DWG NO. XI-BN-01 758121 P4aD UT.60S ITI. LIM-511V4 RD - -X. EXAMINED PER AUG-03, IEB 80 13, HEADER PIPE TO ELBOW WEIS N/A ' CRACKING IN CORE SPRAY SPARGERS' USING RPV INTR, 306-7,4 172.5 AZ N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV IbiR, 306 7,8 172.5 AZ INSPECTION AND FLAW EVALUATION GUI;ELINES* BASELINE ITT EXAM PERFORMED IN LIEU OF EVI.1. (C0185091) 758131 F4bA UT-605 UT LIM-511V4 R0 . .X. EXAMINED PER AU3-03, IEB 80-13, ELBOW TO A DOWNCOMER PIPE WELD N/A ' CRACKING IN CORE EPRAY SPAR 3ERS' USING (HEADER ELEVATION) N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, 306 7,8 352,5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES' BASELINE Li EXAM PERFORMED IN LIEU OF EVT.1. (C0185091) 758161 P4bB UT-60S ITr. LIM-511V4 RD - -X+ EXAMINED PER AUG 03, IEB 80-13, ELBOW TO B DOWNCOMER PIPE WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USING (HEADER ELEVATION) N/A BWRVIP.18, 'CCxt SPRAY INTERNALS RPV INTR, 306-7,4 7.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES' BASELINE UT EXAM PERFCRMED IN LIEU OF EVT-1. (C0185091) 758151 P4bC UT-60S Li. LIM-511V4 R0 .

-X- EXAMINED PER AU3-03, IEB 80 13, ELBOW TO C DOWNCOMER FIPE WEIS N/A ' CRACKING IN CORE SPRAY SPAR 3ERS' USING (HEADER ELEVATION) N/A BWRVIP.18,

• CORE SPRAY INTERNALS RPV INTR, 306-7,8 187.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES

• BASELINE UT EXAM PERFORMED ,

IN LIEU OF EVT-1. (C0185091) 758161 P4 bD Li-6(S UT-LIM-511V4 RD . .X- EXAMINED PER AUG-03, IEB 80-13, ELBOW TO D DOWNCOMER PIPE WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USING (HEA0ER ELEVATION) N/A BWRV.P.18, ' CORE SPRAY INTERNALS RPV INTR, 306-7,8 172.5 AZ INSPUCTION AND FLAW EVALUATION GUIDELINES' BASELINE ITT EXAM PERFORMED IN LIEU OF EVT-1. (C0185091)

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 59 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS i

NR R l ASME OEGE SEC. XI RCEP SIM%RY EXAMINATION AREA CATW EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV rFEF. DWG. NO. XI.BN 9)

,758271 P4cA UT.60S tJI-LIM-511V4 R0 . -X- EXAMINED PER AUG-03, IEB 80 13, A DOWNCOMER PIPE TO ELBOW WELD N/A " CRACKING IN CORE SPRAY SPAROERS" USING (SHROUD ELEVATION) N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, 298-0,e 352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFOR.'ED IN LIEU OF EVT.1. (C0185091) 758181 PacB UT.60s UT-LIM-511V4 RD ..X. EXAMINED PER AUG-03, IEB 80-13, B DOWNCOMER PIPE TO ELBOW WELD N/A

• CRACKING IN CORE SPRAY SPAROERS' USING (SHROUD ELEVATION) N/A BWRVIP.18, " CORE EPRAY INTERNALS RPV INTR, 298 0,8 7.5 AZ INSPECTION AND FLAW EVALUATION CDICELINES". BASELINE UT EXAM PERFORMED IN LIEU TO EVT.I. (C0185091) 758191 P4cc UT.60S UT. LIM-511V4 R0 ..X. EXAMINED PER AUG-03, IEB 80-13, C DOWNCOMER PIPE TO ELBOW WELD N/A ' CRACKING IN CORE SPRAY SPARGER$* USING (SHROUD ELEVATION) N/A BWRVIP.18, " CORE SPRAY IN'TERNALS j RPV INTR, 298-0,0 187.5 AZ INSPECTION AND FLAW EVALUATION GUICELINES*, BASELINE UT EXAM PERFORMED IN LIEU OF EVT.I. (C0185091) 758201 P4cD UT.60S UT-LIM-511V4 RD . .X. EXAMINED PER AUG-03, IEB '0 13, I D DOWNCOMER PIPE TO ELBOW WELD N/A ' CRACKING IN CORE SPRAY SPARGERS" USIN3 (SHROUD ELEVATION) N/A BWRVIP.18, " CORE SPRAY IN*ERNALS RPV INTR, 298 0,s 172.5 AZ INSPECTION AND FLAW EVALUATION ,

GUIDELINES" BASELINE UT EXAM PERFORMED 8 IN LIEU OF EVT.1. (C0185091) 758211 P4dA 17!-603 UT LIM.511V4 R0 X-.- EXAMINED PER AUG-03, IEB 80-13, A DOWNCOMER ELBOW TO SHROUD N/A EVT.1 VT LIM.204 R1 X .. ' CRACKING IN CORE SPRAY SPARGERS' USING l PIPE WELD N/A BWRVIP.18, " CORE SPRAY INTERNALS RPV INTR, 298-0,9 352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES'. BASELINE UT EXAM PERFORMED IN ADOITION TO EVT-1. (00185091)

I

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 60 REVISION: 0 INSERVICE INSPEC" TION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OITTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV (PEF. DWG. NO. XI-PN-8)

EXAMINED PER AUG-03, IEB 80-13, *

~158221 PedB UT-60S UT-LIM-511V4 R0 X-- -

B DOWNCOMER ELBOW TO SHROUD N/A EVT-1 VT-LIM-204 kl X.. . " CRACKING IN CORE SPRAY SPARGERS' USING PIPE WELD N/A BWRVIP-18. " CORE SPRAY INTERNALS RPV INTR, 298 0,e 7.5 A2 INSPECTION AND FLAW EVALUATION GUICELINES" BASELINE UT EXAM PERFORMED IN ADDITION TO EVT-1. (C0185091) 758231 P4dC UT-60S UT-LIM-551V4RD X.- - EXAMINED PER AUG.03, IEB 80-13, C DOWNCOMER ELBOW TO SHROUD N/A EVT-1 VT-LIM-204 R1 X. .. " CRACKING IN CORE SPRAY SPARGERS" LSING PIPE WELD N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, 298-0,8 187.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES

• BASELINE UT EXAM PERFORMED IN ADDITION TO EVT-1. (C0185091) 758241 P4dD UI-60S L7. LIM-511V4 R0 X- . . EXAMINED PER AUG-03, IEB 80+13, D DOWNCOMER ELBOW TO SHROUD N/A EVT-1 VT-LIM-204 R1 X.. . " CRACKING IN CORE SPRAY SPARGERS* USING PIPE WELD N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, 298 0,8 172.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE LT EXAM PERFORMED IN ADDITION TO EVT-1. (CC185091) 758:51 PSA UT-60S UT-LIM-511V4 RD .-X. EXAMINED PER AUG-03, IEB 80-13, A DOWNCOMER PIPE TO SLIDING N/A

• CRACKING IN CORE SPRAY SPAR 0ERS* USING SLEEVE FIELD WELD N/A BWRVIP-10, " CORE SPRAY INTERNALS RPV INTR, 299-7,4 352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED ,

IN LIEU OF EVT.1. (C0185091) 758261 PSB UT.60S UT-LIM-511V4 A0 - .X- EXAMINED PER AUG-03, IEB 80-13, B DOWNCOMER PIPE TO ELIOING N/A

• CRACKING IN CCRE SPRAY SPARGERS* USING SLEEVE FIELD WELD N/A B.*RVI P- 18 , " CORE SPRAY INTERNALS RPV INTR, 299 7,6 7,5 AZ INST %710N AND FLAW EVALUATION GUIDEL.NES" BASELINE ITT EXAM PERFORVID IN LIEU L7 EVT-1 (C0185091)

DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 61 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF) l CLASS 1 CAUEP STATUS COMPONENTS l

NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO l NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS e

PPV fREF. DWS. NO. XI.PN-9) 17T-605 UT. LIM-511V4 RO - .X. EXAMINED PER AUG.03, IEB 80 13, J58271 PSC C DOWNCOMER PIPE TO SLIDING N/A ' CRACKING IN CORE SPRAY SPARGERS* USING j SLEEVE FIELD WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS l RPV INTR, 2 99 7,8 187.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFORMED

]

IN LIEU OF EVT.1. (C0185091) l 758281 PSD UT.6CS UT. LIM.511V4 R0 ..X. EXAMINED PER AUG.03, IEB B0 13.

D DOWNCOMER PIPE TO SLIDING N/A ' CRACKING IN CORE SPRAY SPARGERS' USING SLEEVE FIELD WELD N/A BWRVIP.18, ' CORE SPRAY INTERNALS RPV INTR, 299 7,e 172,5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES", BASELINE UT EXAM PERFORMED IN LIEU OF EVT.1. (C0185091) 758291 P6A LT.6CS UT. LIM-511V4 R0 ..X. EXAMINED PER AUG.03 IEB 80 13, A SLIDING SLEEVE TO OLTER N/A " CRACKING IN CORE SPRAY SPARGERS" USING SLEEVE FIELD WELD N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, 299 7,8 352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES'. BASELINE UT EXAM PERFORMED IN LIEU CF EVT-1. (C0185091) 758301 P6B UT-60s UT. LIM.511V4 RO - X. EXAMINED PER AUG-03, IEB 80 13, l

e SLEEVE FIELD WELD N/A BWRVIP.18, " CORE SFRAY INTERNALS i RPV INTR, 299 7,a 7.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES *, BASELINE UT EXAM FERFORMED l 4

8 IN LIEU OF EVT.1. (C0185091) 758311 P6C UT-60S L"T. LIM-511V4 RD ..X. EXAMINED PER AUG-03, IEB 80 13, C SLIDING SLEEVE TO OUTER N/A *CRACKIN3 IN CORE SPRAY SPARGERS' USING SLEEVE FIELD WELD N/A BWRVIP-18, 'CCRE SPEAY INTERNALS RPV INTR, 299 7,8187.5 AZ INSPECTION AND FLAN EVALUATION GUIDELINES". EASELINE UT EXAM PERFORMED IN LIEU OF EVT.1. IC0185091) 1 l

DATE: 08/20/99 LIMERICK GENERATIN3 STATION UNIT 2 . PAGE: 62 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVE , THIRD PERIOD, SECOND OLTA0E (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO N'JMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REPARKS PPV ' PEF DW'- NO XI-PN-91 i

758321 P6D UT-60S UT-LIM-511V4 RO - -X- EXAMINED PER AUG-03, IEB 80-13, D SLIDING SLEEVE TO CUTER N/A ' CRACKING IN CORE SPRAY SPARGERS" USING SLEEVE FIELD WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, 299-7,8172,5 AZ INSPECTION AND FLAW EVEUATION GUIDELINES" BASELIEN UT EXAM PERFORMED IN LIEU OF EVT-1 (C0185091) 758331 P7A UT-60S UT-LIM-511V4 R0 --X- EXAMINED FER AUG-03, IEB 80 13, A OUTER SLEEVE TO PIPE SHOP N/A *CRACKIN IN CORE SPRAY SPARGERS' USING WELD N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, 299-7,s352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIEU CF EVT-1. (CC185091) 758341 P7B W-60S UT-LIM-511V4 RD -

-X- EXAMINED PER AUG-03, IEB 80-13, B OUTER SLEEVE TO PIPE SHOP N/A ' CRACKING IN CORE SPRAY SPARGERS" USING WELD N/A SWRVIP.18, ' CORE SPRAY INTERNES RPV INTR, 299-7,87.5 AZ INSPECTION AND FIAW EVEUATION GUIDELINES". BASELINE UT EXAM PERFORMED IN LIEU TO EVT-1. (C0185091) 758351 P7C UT-60S LT-LIM-511V4 RO -

-X- EXAMINED PER AUG-03, IEB 80-13.

C OUTER SLEEVE TO PIPE SHCP N/A

• CRACKING IN CORE SPRAY SPAROERS' USING WELD N/A BWRVIP-18, ' CORE SPRAY INTERNES RPV INTR, 299-7,3187.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE W EXAM PERFORMED o IN LIEU OF EVT-1. (C0185091) 758361 P7D Li-605 UT-LIM-511V4 RO - -X- EXAMINED PER AUG-03, IEB 80-13, D OWER SLEEVE TO PIPE SHOP N/A ' CRACKING IN CORE SPRAY SPAR 0ERS" USING WELD N/A BWRVIP-18, "CCRE SPRAY INTERNALS RPV INUt, 299 7,4172.5 A2 INSPECTION AND FLAW EVEUATION GUIDELINES" BASELINE UT EXAM PERFOPJ4ED IN LIEU OF EVT-1. (C0185091)

i DATER 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 63 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL THIRD PERIOD, SECOND OLiAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO ME'IHOD PROCEDURE CRMR REMARKS PPV (PEF. DWG. NO. KI-PN-91

,758371 PBaA UT-60S Li-LIM-511V4 R0 . *X- EXAMINED PER AUG-03. IES 80-13, A SHROUD PIPE TO COLLAR WELD N/A EVT-1 VT-LIM-204 R1 X-- . " CRACKING IN CORE SPRAY SPARGERS" USING RPV INTR, 298-0,a352.5 AZ N/A BWRVIP.18, " CORE SPRAY JNTERNALS RPV INTR, 298-0 e352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE VT EXAM PERFORMED IN ADDITION TO EVT-1. (C0185091) 758381 P8aB UT-60S UT-LIM 511V4 R0 - -X- EXAMINED PER AUG-03, IEB 80 13, B SHROUD PIPE TO COLLAR WELD N/A EVT-1 VT-LIM-204 R1 X- -- " CRACKING IN CORE SPRAY SPARGEP." USING RPV INTR, 298-0,87.5 AZ N/A BWRVIP-18, " CORE SPRAY INTERNnLS RPV INTR, 298 0,67,5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN ADDITION TO EVT-1. (C0185091)

, . . <1 P8aC UT-60S LT-LIM-511V4 R0 ..X- EXAMINED PER AUG 03, IEB 80-13, C SHROUD PIPE TO COLLAR WELD N/A EVT-1 VT-LIM-204 R1 X- .- ' CRACKING IN CORE SPRAY SPARGERS" USING RPV INTR, 298-0,8187.5 AZ N/A BWRVIP-18, ' CORE SPRAY IhTERhALS RPV INTR, 298-0,8187.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES". BASELINE UT EXAM PERFCRMED IN ADDITION TO EVT-1. (C0185091) 758401 PBaD UT-60s Ifr. LIM-511V4 RC ..X- EXAMINED PER AUG-03, IEB 80-13,

, D SHROUD PIPE TO COLLAR WELD N/A EVT-1 VT LIM-204 R1 X- -- 'CRACKIN3 IN CORE SPRAY SPARGERS' USING RPV INTR, 298-0,8172.5 AZ N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, 298-0,8172.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED 9

IN ADDITION TO EVT-1. (C0185091) 758411 P8bA UT-60S UT. LIM-511V4 RO --X- EXAMINED PER AUG-03, IEB 80-13, A COLLAR TO SHROUD WELD N/A ' CRACKING IN CORE SPRAY SPARGERS* USING RPV INTR, 298-0,s352.5 AZ N/A BWRVIP-18, ' CORE SPRAY INTERNALS RPV INTR, 298 0,8352.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE Li EXAM PERFORMED IN LIEU OF EVT-1. (C0185091)

l

\

l DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 64 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV ' PEF. DWO. NO. XI-PN-8) 1 758421 P8bB UT-60S UT-LIM-511V4 R0 --X- EXAMINED PER AUG 03, IEB 80-13, B COLLAR TO SHROUD WELD N/A " CRACKING IN CORE SPRAY SPARGER$" USING RPV INTR, 298 0,87.5 AZ N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, 298-0,67.5 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIEU CF EVT-1. (C0165091) l l

758431 P8bC UT-60S UT LIM-511V4 R0 . -X- EXAMINED PER AUG-03, IEB 80-13, C COLLAR TO SHROUD WELD N/A " CRACKING IN CORE SPRAY SPARGERS" USING RPV INTR, 298-0,8187.5 AZ N/A BWRVIP-18, " CORE SPRAY INTERNALS RPV INTR, 298-0,s187.5 AZ INSPECTION AND FLAW EV EUATION GUIDELINES" BASELINE UT EXAM PERFORMED IN LIEU TO EVT-1. (C0185091) 758441 P8bD Li-60S UT-LIM-511V4 RO - -X. EXAMINED PER AUG-03, IEB 80-13.

D COLLAR TO SHROUD WELD N/A " CRACKING IN CORE SPRAY SPARGERS" USIN3

)

RPV INTR, 298 0,s172.5 AZ N/A BWRVIP-18 " CORE SPRAY INTERNALS RPV INTR, 298 0,8172.5 AZ INSPECTION AND FLAW EVALUATION j GUIDELINES" BASELINE UT EX1M PERFORMED )

IN LIEU OF EVT-1. (C0185091) i 758551 PB7 274.5AZ EVT-1 VT-LIM-204 R1 X-- - EXAMINED PER AUG-03, IEB 80 13, A & C KEADER PIPE VERTICAL N/A " CRACKING IN CORE SPRAY SPARGERS" USING BRACKET AND RPV ATTACHMENT N/A BWRVIP-18, " CORE SPRAY INSPECT!ON AND RPV INTR, 306.7',274.5 AZ FLAW EVE UATION GUIDELINES" (C0183509) 758561 PBS 345A2 EVT-1 VT-LIM-204 R1 X- -- EXAMINED PER AUG-03, IEB 80-13, A & C EEADER PIPE BRACKET AND N/A " CRACKING IN CORE SPRAY SPARGERS" USING RPV ATTACHMENT WELD N/A BWRVIP-18,

• CORE SPRAY INSPECTION AND RPV INTR, 306.7'.345 AZ FLAW EVALUATION GUIDELINES" (C0183509) 758571 .S1A EVT-1 VT-LIM-204 R1 X- -- EXAMINED PER AUG-03, IEB $0-13, A SPARGER T-BOX COVER PLATE N/A " CRACKING IN CORE SPRAY SPARGERS" USING l WELD N/A BWRVIP-18. " CORE SPRAY INSPECTION AND l RPV INTR, 298',352.5 A2 FLAW EVALUATION GUIDELINES". (C0183509)

DATE: C8/20/99 LIMERICX GENERATING STATION UNIT 2 . PAGE: 65 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND CITIAGE (99RF)

CIASS 1 CAUEP STATUS COMPONE) TIS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS RPV (PFF. DWG. No. XT-BN-9) l g 758581 S1B EVT-1 VT-LIM-204 R1 X--- EXAMINED PER AUG 03. IEB 80-13, 8 SPARGER T-BOX COVER PLATE N/A ' CRACKING IN CORE SPRAY SPARGERS' USING I WELD N/A BWRVIP-18,

• CORE SPRAY INSPECTION AND RPV INTR, 298',7.5 AZ FLAW EVALUATION GUIDELINES' (C0163509) 758611 S2aA EVT-1 VT-LIM 204 R1 X--- EXAMINED PEi1 AUG-03, IEB B0-13, A SPARGER T-DOX TO PIPE WELD N/A "URA.CKING IN CORE SPRAY SPARGERS" USING

{RIGHT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV INTR, 298',352.5 AZ FLAW EVALUATION GUIDELINES" (CC183509) ,

i i

758621 52bA EVT 1 VT-LIM-204 R1 X.-- EXAMINED PER AUG-03, IEB 80-13, A SPARGER T-BOX TO PIPE WELD N/A ' CRACKING IN CORE SPRAY SPARGER$' USING (LEFT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV INTR, 298',352.5 AZ FLAW EVALUATION GUIDELINES' (C0183509) !

758631 S2aB EVT-1 VT-LIM-204 R1 X--- EXAMINED PER AUT-03, IEB 80-13, 8 SPARGER T-DOX TO PIPE WELD N/A 'CRACKIN3 IN CORE SPRAY SPARGERS' USING I (RIGHT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPE0"IION AND I RPV INTR, 298',7,5 AZ FLAW EVALUATION GUIDELINES *. (C0183509) q 758641 S2b8 EVT-1 VT-LIM-204 R1 X.-. EXAMINED PER AUG-03. IEB 80 13,

, B SPARGER T-BCX TO PIPE WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USIN3 ,

(LEFT SIDE) N/A BWRVIP-18, " CORE SPRAY INSPECTION AND RPV INTR, 298',7.5 AZ FLAW EVALUATION GUIDELINES *. (C0183503) e 758691 S3aXXA VT-1 VT-LIM-204 R1 X--- EXAMINED NOZZLES 1A THRU 65A PER AU3-03, A SPARGER PIPE TO NOZZLE WELD, N/A IEB 80-13, ' CRACKING IN COPS SPRAY TYP. OF 65 NOZZLES (XX) N/A SPARGERS" USIN3 BWRVIP-18, ' CORE SPRAY RPV INTR, 298',273-88 AZ INSPECTION AND FLAW EVALUATICN GUIDELINES". (C0183509) 758731 S3bXXA VT-1 VT-LIM-204 R1 X- - EXAMINED NQZZLES 1A THRU 65A PER AUG-03, A SPARGER NOZZLE TO ORIFICE N/A IEB 80-13, ' CRACKING IN CORE SPRAY WELD, TYP. OF 65 ORIFICES 1XX) N/A SPARGERS' USING BWRVIP-18 ' CORE SPRAY RPV INTR, 290',273-88 AZ INSPECTION AND FLAW EVALUATION GUIDELINES *. (C0183509)

l DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 66 REVISION: 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE (99RF)

CLASS 1 CAUEP STATUS COMPONENTS NR R ASME OEGE SEC, XI RCEP SUb9%RY EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV fREF. DWG, NO. XT-BN-9) 758811 S3dXXA VT-1 VT-LIM-204 R1 X- -- EXAMINED NOZZLES 1A THRU 65A PER AUG-03, A SPARGER NOZZLE STITCH WELDS, N/A !EB 80-13, ' CRACKING IN CORE SPRAY 2 WELDS 180 DEG. APART, 5 N/A SFARGERS' USING BWRVIP.18. " CORE SPRAY RPV IhiR, 298',273-88 AZ INSPECTION AND FLAW EVALUATION GUIDELINES" (C0183509) 758891 $4aA EVT-1 VT. LIM-2 04 R1 X. -- EXAMINED PER AUG-03, IEB 80-13, A SPARGER PIPE TO END CAP WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USING (RIGHT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV INTR, 290',88AZ FI.AW SVEUATION GUIDELINES' (C0183509) 758901 SeaB EVT 1 VT. LIM-204 R1 X- -- EXAMINED PER AUG-03, IEB 80-13, B SPARGER PIPE TO END CAP WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USING (RIGHT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV INTR, 290',8BAZ FLAW EVALUATION GUIDELINES *. (C0183509) 758931 S4bA EVT-1 VT-LIM-204 R1 X. - EXAMINED PER AUG-03, IEB 80-13, A SPARGER PIPE TO END CAP WELD N/A "CRACKIN3 IN CORE SPRAY SPAR 3ERS* USING (LEFT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV II."R. 298',273)Z FLAW EVAI.UATION GUIDELINES'. (C0183509) 158941 54bB EVT-1 VT-LIM-204 R1 X- .. EXAMINED PER AU3-03, IEB 80-13, B SPARGER PIPE TO END CAP WELD N/A ' CRACKING IN CORE SPRAY SPARGERS' USING (LEFT SIDE) N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND RPV INTR, 298',273AZ FIAW EVALUATION GUIDELINES * . (C0183509) .

758971 SBl EVT-1 VT-LIM-204 R1 X--- EXAMINED PER AU3-03, IEB B0-13, A & B EPARGER BRACKET AND N/A ' CRACKING IN CORE SPRAY SPARGERS' USIN3 SHROUD ATTACHMENT WELDS N/A BWRVIP-38, ' CORE SPRAY INSPECTION AND RPV INTR, 298',7.5AZ FLAW EVAI,UATION GUIDELINES *. (C0183509) 758981 SB2 EVT-1 VT-LIM.204 R1 X--- EXAM!NED PER AUG-03, IEB 80-13.

A & B SPARGER BRACKET AND N/A ' CRACKING IN CORE SPRAY SPARGERS' USING ,

l SHROUD ATTACHMENT WELDS N/A BWRVIP-18, ' CORE SPRAY INSPECTION AND j RPV INTR, 2 98 ' ,44 AZ FI.AW EVALUATION GUIDELINES *. (C0183509)

i l

i DATE: 08/20/99 LIMERICK GENERATING STATION UNIT 2 . PAGE: 67 REVISION 0 INSERVICE INSPECTION

SUMMARY

REPORT FIRST INTERVAL, THIRD PERIOD, SECOND OUTAGE I99RF)

CIASS 1 CAUEP STA7US COMPONENTS NR R ASME OEGE SEC. XI RCEP

SUMMARY

EXAMINATION AREA CATGY EXAM EOOO NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE CRMR REMARKS PPV 'RFP. DWG. NO. XI-BN-8) 758991 SB3 EVT-1 VT-LIM-204 R1 X- - EXAMINED PER AUG-03, IEB 80-13, A & B SPARGER BRACKET AND N/A ' CRACK!NG IN CORE SPRAY SFARGERS" USING SHROUD ATTACHMENT WELDS N/A BWRVIP-18, ' CORE SPkAY INSPECTION AND RPV INM, 298',84AZ FLAW EVALUATION GUIDELINES *. (C0183509)

(REF. DWG, NO. ST-4 INDEX) i 800000 REACTOR COOLANT VT-2 ST-4-041-950 2 .X-- MINOR LEAKAGE CBSERVED AT ? LOCATIONS.

PRESSURE BOUNDARY CIASS 1 B-P 4 CRD FLANGES (A0745244), 1 RECIRC PUMP B15.10 SEAL (A1210978) E%ALUATED SAT. MINOR MAINTENANCE PERFORMED ON 1 RECIRC VALVE PACKING (A1210957), 1 RWCU VALVE LEAK OFF PLUG (A1210961) AND WERE RE-EXAMINED SAT, l

80000$ REACTOR COOLANT VT-2 ST-4-011-950-2 -X-- MINOR LEAKAGE OBSERVED AT 7 LOCATIONS.

PRESSURE BOUNDARY CLASS 1 B-P 4 CRD FLANGES (A0745144), 1 RECIRC PUMP B15.11 SEAL (A1210978) EVALUATED SAT. MINOR MAINTENANCE PERFORMED ON 1 RECIRC VALVE l PACKING (11210557), I RWCU VLAVE LEAK OFF PLUG (A1210961) AND WERE RE EXAMINED SAT.

l i

I SECTION 2

SUMMARY

OF REPORTABLE CONDITIONS OBSERVED DURING IN-SERVICE INSPECTION LIMERICK GENERATING STATION l

UNIT 2 i

FEBRUARY 28,1997 TO MAY 25,1999 O

1 l

. Section 2

SUMMARY

OF REPORTABLE CONDITIONS OBSERVED As a result of examinations performed prior to and during the Unit 2,5* Refuel Outage, numerous conditions were reported. Subsequent examinations and/or evaluations determined most conditions to be either insignificant or geometric in nature. However, two (2) reportable conditions were recorded and are summarized below:

~

STEAM DRYER UPPER SUPPORT RING During the augmented visual examination of the steam dryer assembly, crack-like indications characteristic of Intergranular Stress Corrosion Cracking (IGSCC) were observed in the upper support ring. The indications are located in the top horizontal face of the support ring in vicinity of lifting rods at 135 & 315 deg.

Azimuths. An engineering evaluation was performed determining the observed indications would not adversly effect the structure of the dryer for operating conditions or lifting during outage operations. This evaluation resulted in a use-as-is NCR disposition. Reference NCR # LG 99-01059.

H-1. H-2. H-3. H-4. H-5. H-6 CORE SHROUD WELDS During the baseline ultrasonic examination of core shroud circumferential welds per NRC Generic Letter 94-03 and BWRVIP-01, crack like indications were j observed at these six weld locations. A results of inspection report, as required by Generic Letter 94-03, was submitted to the NRC on 6/24/99. Details of the  ;

flaws detected at these welds can be found in this report. An engineering J evaluation of the results was made using the approach outlined in the BWRVIP-  !

c 01, " Core Shroud Inspection and Flaw Evaluation Guidelines". This evaluation l concluded that the core shroud with these flawed welds can support continued ,

operation of the unit for at least one (two year) operating cycle. Reference NCR

1. LG 99-01153.

l SECTION 3 -

l

SUMMARY

OF ASME REPAlRS AND REPLACEMENTS COMPLETED q LIMERICK GENERATING STATION UNIT 2 FEBRUARY 28,1997 TO MAY 25,1999

- --_O

Section 3 Page 1 of 3

SUMMARY

OF ASME XI REPAIRS AND REPLACEMENTS NIS-2 No. Description of Work System 041: Nuclear Boiler- Main Steam Relief Valves C0182377 HV-041-209A, Seal weld existing leak-off plug.

P C0185770 HV-041-2FO19, Replaced commercial steelleak-off plug with ASME R0724250 PSV-041-2F013A, Replaced MSRV body and pilot.

R0724263 PSV-041-2F013B, Replaced MSRV body and pilot.

R0725529 PSV-041-2F013C, Replaced MSRV body and pilot.

R0725722 PSV-041-2F013D, Replaced MSRV body and pilot.

R0728131 PSV-041-2F013E, Replaced MSRV body and pilot.

R0728010 PSV-041-2F013F, Replaced MSRV body and pilot.

R0717635 PSV-041-2F013G, Replaced MSRV body and pilot.

l R0771716 PSV-041-2F013H, Replaced MSRV body and pilot.

R0728102 PSV-041-2F013J, Replaced MSRV body and pilot.

R0728470 PSV-041-2F013K, Replaced MSRV body and pilot. I i

R0727537 PSV-041-2F013L, Replaced MSRV body and pilot. I

, R0727756 PSV-041-2F013M, Replaced MSRV body and pilot.

R0724266 PSV-041-2F013N, Replaced MSRV body and pilot.

~

R0727757 PSV-041-2F013S, Replaced MSRV body ane pilot.

System 044: Reactor Water Clean-up C0182035 PSV-044-208, Installed new piping, relocated relief valve and modified pipe support ECC-203-H011. Code Case N-416-1, ECR 98-00954.

C0182375 HV-044-2F039, Replaced 4" flanged check valve.

1

Section 3 Page 2 of 3 NIS-2 No. Description of Work System 048: Stand-bv Liould Control C0175490 2B-P208, Replaced 1 stuffing box gland. ,

C0175495 2C-P208, Replaced 2 stuffing box glands.

C0182495 XV-048-2F004C, Replaced inlet fitting and trigger body on explosive valve.

R0619495 XV-048-1F004B, Replaced inlet fitting and trigger body on explosive valve.

R0664125 XV-048-2F004A, Replaced inlet fitting and trigger body on explosive valve.

System 049: RCIC C0182492 HV-049-2F060. Replaced commercial steel leak-off plug with ASME material.

System 051: Residual Heat Removal C0183726 HV-051-2F050B, Replaced check valve disk.

C0183752 HV-051-2F0024A, Replaced commercial steelleak-off plug with ASME ,

material.

R0775260 051-2F065C, Replaced commercial steelleak-off plug with ASME material and sealwelded.

R0777241 051-2F077, Replaced commercial steelleak-off plug with ASME material  :

and seal welded.

1 1

Section 3 Page 3 Of 3 NIS-2 No. Description of Work SYSTEM 052: CORE SPRAY R0772368 HV-052-208, Replaced commercial steelleak-off plug with ASME material and seal welded.

R0776144 052-2F0078, Replaced commercial steel leak-off plug with ASME material and sealwelded.

R0776731 052-2F007A, Replaced commercial steelleak-off plug with ASME material and seal welded.

SYSTEM-055 Hioh Pressure Coolant inlection C0181992 HV-055-2F072, Replaced commercial steelleak-off plug with ASME material.

C0181716 HV-055-2F093, Replaced commercial steelleak-off plug with ASME material.

R0532792 055-2F077 and 055-2F078, Replaced 2" check valves and adjacent pipe.

R0780127 055-2048 and 055-2049, Replaced 1-1/2" check valves.

SYSTEM 061: LIQUID RADWASTE C0183612 HV-061-231, Replaced two valve bonnet nuts.

SYSTEM 103: SNUBBERS A1162416 Replaced mechanical snubbers.

A1162608 Replaced mechanical snubbers.

l

f l

l l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provnions of the ASME Code Sechon XI

1. Owner PECO Enemy Company Date Juhr 13.1999 Name 2301 Market Street. Phl!adelphia. PA 19101 Sheet 1 of 2 Address

2. Plant timenck Generatina Station Unit 2 Name ,

P O Box 2300. Sanatoon. PA 19464-2300 Work Order No C0182377 Address Repair Organization P.O. No., Job No. etc.

3. Work Performed by PECO Enemy Company Type Code Symbol Stamp N/A I Name Authonzation No. N/A 1

P O Box 2300, Sanatoca PA 19464-2300 Expiration Date N/A Address 4 Identification of System Nuclear Boiler (System 041) Line No DBB-203 HV-041-209A l 5. (a) Applicable Construction Code ASME lil 19 71 Edition, Summer 1973 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86 6 Identification of Components Repaired or Repta d and Replacement Components Repaired, ASME Name of ' Name of Manufacturer National Other Year Built Replaced, or Code I Component Manufacturer Senal No. Bard No. Identificahon Replacement Stamped l (Yes or No)

! VALVE VELAN 0069 N/A N/A N/A REPAIRED YES BONNET l

l l

l l

I

7. Desenption of Work Removed leakoff olva seal weld and reweided 8 Tests conducted. Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other. Pressure 970. osi Test Temp. 543 'F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size B 1/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet s numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 t

1 i

W/O No. C0182377 Sheet 2 of 2 1

I FORM Nis-2 (BACK)

9. Remarks None

. Applicable Manufacturers Data Reports to be attached 9

CERTIFICATE OF COMPLIANCE We certify that the statements rnade in the report are correct and the repair conforms to the rules of the ASME Code,Section XI. repair or repisoement Type Code Symbol Stamp NA Certrhcate of Authorization No. NA Expiraten Date NA Signed h. -

J H Kramer (EMn G Date July 13 .19 99 (SwnerorOwnersDesgnee Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commssion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B l & I Company of Hartford. CT . have ed the components desenbed I in ths Owners Report dunng the penod '5/~JO/94 to 7 9 . and state that to the best of my knowledge and belief, the Owner has perforrded examinations and taKen cofrective measures desenbed in this  !

. Owners Report in accordance with the requirements of the ASME Code,Section XI. 1 By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures described in this Owners Report. Furthermore, neither the inspector not his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

/ Commssions PA-24971.N & A inspectors Sgnature [ National Board, State, Province, and Endorsements Date M 199N (12/B2)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requesd by the Provisions of the ASME Code Seebon XI

1. Owner PECO Enerov Company Date July 13.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Umenck Generstmo Station Unit 2 Name .

P O Box 2300. Senatona. PA 19464-2300 Work Order No C0185770 Address Repair Organaaten P.O. No., Job No, etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzaten No. N/A P.O. Box 2300. Senatoca. PA 19464-2300 Expraten Date N/A Address

4. Identificabon of System Nuclear Boiler (System 041) Une No. DBA-205 HV-041-2F019

5. (a) Applicable Construcson Code ASME lil 19 71 Edition. Summer 1973 Addenda, N/A Code Case (b) Applicable Edition of Secten XI uttzed for Repers or Replacements 19 86

6. Identification of Components Repared or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Nabonal Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identificaten Replacement Stamped (Yes or No) 1/2

• NPT COLONIAL HEAT CODE N/A *114-79168 N/A REPLACEMENT NO PtPE PLUG MACHINE AFV POW 607237

• Traceabday per PECO part code number.

7. Descnphon of Work Replaced - .. -@ steel onckino leakoff pluo with ASME material and seat welded

8. Tests conduced: Hydrostate O Pneumatic 0 NominalOperating Pressure a Other. Pressure 970 oni Test Temp. 200 *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is induded on each sheer., and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept, ASME,345 E.47th St., New York, N.Y.10017 l

W/O No. C0185770 Sheet 2 of 2 FORM NIS-2 (BACK)

. 9 Remarks None Apphcable Manufacturers Data Reports to be attached e

CERTIFICATE OF COMPLIANCE We artify that the statements made in the report are correct and the replacernent conforms to the rules of the ASME Code,Section XI. repair or replamment Type Code Symbol Stamp NA Certtficate of Authornation No. NA Expiraton Date NA Signed b b . -

J H Kramer (Enaineer) Date Jutv 13 .19 99 (fwner or Owner's Desgnee, Tme CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commssion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by. H S B t & I Company of Hartford. CT _ . have r'jspect9d the components desenbed in thrs Owners Report dunng the penod 4//d/99 to "7/13/99 . and state that e to the best of my knowledge and belief, the Owner has'perfdmed examinations and taMn correictive measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.

By signing this certificate nether the inspector nor his employer makes any warranty, expressed or impled, concoming the examinations and correctrve measures des::rtbed in this Owners Report. Furthermore, neither the inspector nor hh employer

, shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

Commissions PA-2497 f.N & A

' inspectors Sgnature

[ N&tional Board, State, Provinm, and Endorsernents Date

/

519 N (12/82)

FO,MA NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT'S Ac Requwed by the Provissons of the ASME Code Sechon XI l o

1. Owner PECO Enerov Company Date Julv 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Umerick Generabna Staten Una 2 Name -

P O Box 2300. Sanatoon. PA 19464-2300 Work Order No. R0724250 Address Reper Organgston P.O. No., Job No. etc.

3. Work Performed by PECO Enorav Company Type Code Symbol Stamp N/A Name Authornaten No. N/A P.O Box 2300. Sanatona PA 19464-2300 Exprabon Date N/A Address

4. Identscaten of System Nudear Boiler (System Osi) 1.ine No APE-2MS PSV-041-2F013A

5. (a) Apphcable Construchon Code ASME 111 19 68 Edition. Summer 1970 Addenda N/A Code Case (b) Appicable Edition of Sechon XI Utilmed for Repers or Replacements 19 86

6. IdentAcahon of Components Repawed or Pfwand Replacement Components Repared, ASME Name of Name of Manufacturer Natenal Other Year Buit P+w, or Code Component Manufacturer SenalNo. Board No. Identicaten Replacement Stamped (Yes or No)

MSRV PILOT TARGET 003 N/A MA 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 150 N/A N/A MA REPLACEMENT YES ROCK

7. Desonpton of Work Roolaced Main Steam Relief Valve SM 151 and pilot S/N 510 with reworked body SN 159 and new pilot S/N 00L

8. Tests conducted: Hydrostahc D Pneumahe O NommelOperahng Pressure e Other. Pressuse 970 osi Test Temp. E*F.

NOTE: Supplemental shoots in form of lots, sketches, or drawings moy be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in llems 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of thas form.

l (12/82) This Form (E00030) may be obtained frorn the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l

l j

1 l

W/O No. R0724250 Sheet 2 of 2 I

l FORM NLS-2 (BACK)

9. Remarks Manufacturers Data Report is traceable by PECO Work Order packsoe l

. Apphcable Manufacturers Data Reports to be attached

)

Replaced two staae pilot with three staae pilot in accordance with PECO ECR 9842534 e

CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are correct and this rootacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzation No, NA Expiraten Date NA Signed -

. -- J H. Kramer. Enoineer Date JuN 9 .19 99 Dirner orDwners Desagnes, Title CERTIFICATE OF INSERVICE INSPECTION  ;

i 1, the undersigned, holding a valid commesson issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B.! & l Company of Hartford. CT have mapected the components described in ths Owner's Report dunng the penod 4 //2/99 to A////9f . and state that to the best of rny knowledge and belief, the Owner has perfomfed exarrunstens and ta(en i!onectrve rnessures described in this

= Owners Report in accordance with the requirements of the ASME Code, Sechon XI.

By signing this certAcate neither the inspedor nor his employer makes any wananty, expressed or implied, concoming the examinations and corrective rnessures described in this Owners Report Furthermore, neither the inspector nor his employer shat be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this

. mapoden.

I Commasons PA-2497 f.N & A inspectors Sagnature / Natonal Board, State, Province, and Endorsements Dai. B/n

/

is 99  !

i (12/82) 1 l

1 1

l l

I I

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Secbon XI

1. Owner PECO Eneroy Company Date Juhr9.1999 Narne 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address

2. Plant tirnerick Generatina Staton Unit 2 Narne .

P O Box 2300. Senatoca. PA 1946&2300 Work Order No R0724263 Address Repair Organnaton P.O. No., Job No. etc.

3. Work Performed by PECO En. rov Company Type Code Symbol Stamp N/A Name Authonzaton No. N/A P.O Box 2300. Sanatoas. PA 19464-2300 Expiration Date N/A Address

4. Idertification of System Nuclear Boiler (System 041) Line No APE-2MS PSV&1-2F013B

5. (a) Aplicable Constru@on Code ASME111 19 68 Edibon. Summer 1970 Addenda, N/A Code Case (b) Applicable Editon of Se@on XI Utikzed for Repairs or Replacements 19 86

6. Identr5 cation of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identificaton Replamment Stamped (Yes or No)

MSRV PILOT TARGET 006 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 155 N/A N/A N/A REPLACEMENT YES ROCK

7. Desenpton of Work Reotaced Main Steam Relief Vaw S/N 181 and pilot S/N 534 with reworked body S/N 155 and new pilot S/N 006

8. Tests conducted: Hyorostate C Pneumatic 0 NorninalOperating Pressure s Other _ Pressure 970 osi TestTemp. 200 *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept, ASME,345 E.47th St., New York, N.Y.10017

W/O No. R0724263 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Report is tracoatne by PECO Work Order oncksoe AM Manufacturers Data Reports to be attached Replaced two staae pilot with three staae oliot in w-G, with PECO ECR 91W2534.

e CERTFICATE OF CORM. LANCE We certify that the statements made in the report are corred and this toolacement conforms to the rules of the ASME Code,Section XI. repar or replacerrent Type Code Symbol Stamp NA Cwuncate of Authormabon No. NA Exprabon Date NA Signed b- . _- J H. Kramer. Eroneer Date Julv9 19 99 (gwner or Owners Desgnes, Tale CERTFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commenen issued by the Nabonal Board of Boiler and Pressure Vessel inspedoes and the State or Prowwm of Pennsvivania and employed by H.S B I & l. Company of Hartford. CT have inspeded the w..w,.r.^ desenbod in the Owners Report dunng the penod 4/h2/ff to A/#hMP . and state that to the best of my k-cO "-;= and belief, the Owner has performed exammabons and takeh correcbve measures described in this Owners Report in accordance with the requirements of the ASME Code, Seden XI.

. By signing this ceruhcote neither the inspedor nor his employw makes any warranty, exproceed or imphed, concoming the i examinations and conoeve measures described in this Owners Report. Furthermore, neither the inspector nor his employer i shall be liable in any menner for any personal iriury or property damage or a loss of any kind arising from or conneded with this I

/

A>V Commesens PA-24971.N & A inspectors Sgnature / Nabonal Board, State, Provmoe, and Endorsements Date A/// 1999 I (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner PECO Enerav Company Date July 9.1999 Narne l 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 l

Address i

! 2. Plant LimericA Generatina Station Unit 2 Name .

P.O Box 2300. Senatone. PA 19464-2300 Work Order No R0725529 l Address Repair Organnaten P.O. No,, Job No. etc.

3. Work Performed by PECO Eneruv Company Type Code Symbol Stamp N'A Name Auu.e.L.6,n No. N/A

! P O Box 2300 Senatoca. PA 19464-2300 Expiraton Date N/A l Address

4. Identrncaten of System Nuclear Boiler (System 041) Line No APE-2MS PSV-041-2F013C

5. (a) Applicable Construchon Code ASMEIll 19 68 Editen. Summer 1971 Addenda. N/A Code Case (b) Apphcable Editon of Secten XI Ubkzed for Repairs or Replacements 19 86 l

6. Identscaton of Components Repaired or Replaced and Replacement Components

{

i Repaired, ASME l Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identscahon Replamment Stamped (Yes or No)

MSRV PILOT TARGET 006 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 158 N/A N/A N/A REPLACEMENT YES ROCK l

7. Desenpton of Work Replaced Main Steam Rehof Valve S/N 170 and pilot SN 1212 with reworked body SM 158 and new ollot S/N 008.

8. Tests conducted: Hydrostate D Pneumabc D NominalOperating Pressure a Other. Pressure 970 osi TestTemp. 200 *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept, ASME,345 E.47th St., New York, N.Y.10017

r.

W/O No. R0725529 Sheet 2 of 2 FOptM NIS-2 (SACK)

I

9. Romerks Manufacturers Data Report is traceable by PECO Work Order ondmoe Appicable Menulemurers Data Reports to be attached Replaced two stone oliot with three stane oilot in accordenes with PECO ECR 9tM2534.

)

[

l MSRV body S/N 170 and oilot S/N 1212 were installed durina o mak,vcie outane via Work Order C0178960 and reoloced 2R05 .

CERTIFICATE OF COMPLAANCE We certsfy that the statements rnede in the report are coned and this replacement conforms to the rules of the ASME Code, Sedian XI. repair or repiscoment Type Code Symbol Sterry NA l

l Catificate of Authormabon No. NA Expirebon Date NA Signed > - J.H Kramer. E.c._ Date July 9 .19 99 l Olmer of Owners Desgnes, Tlue i

i l

CERTIFICATE OF INSERVICE INSPECTION 1, the undetegned, holding a valid commmeen leeued by #w Nabonel Board of Boger and Pressure Vessel inspectors and the State or Province of Pennevivarus and employed by H S.B I & I Company of Hertford. CT have irppeded the components descrbed in this Owners Report during the period Wh>/99 to A////77 . and state that to the best of my knowledge and belief, the Owner has perforr6ed 6xammabons and 16ked conedsve measures described in this Owner's Report in accordance with the seguirements of the ASME Code, Sechon XI.

+ By signing this certecame neither the inspector nor his employer makes any warranty, expressed or imphed, concomme the examinsbons and conedsve measures deserted in this Owners Report. Furthermose, neither the inspedor nor his employer shes be liebte in any menner for any personal iriury or property demose or a loss of any kind arising from or conneded with this j irmar='*M

/>> Commessons PA-2497 f.N & A

~ fnepodors Signelure [ Nobonel Board, State, Province, and Endorsements Date 8b/ 19 99 _

l (12/82) j

f FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Sedion XI l

1. Owner PECO Enerav Company Date July 9.1999 Name 2301 Market Stmet. Philadelphia, PA 19101 Sheet 1 of 2 Address

2. Plant Umerick Generatina Station Unit 2 Name ,

P O Box 2300. Sanatoas PA 19464-2300 Work Order No. R0725722 and C0187530 Address Repair Organizaton P.O. No., Job No. etc.

I

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authormaton No. N/A P.O. Box 2300. Senatoaa. PA 19464-2300 Expiraton Date N/A Address f

4. Identificaton of System Nuclear Boiler (System 041) Line No APE-2MS PSV-041-2F013D  ;

l' S. (a) Appleable Construction Code ASME Ill 19 68 Edition. Summer 1970 Addenda, N/A Code Case (b) Applicable Edrtion of Sedon XI Utilized for Repairs or Replacements 19 86

6. Ident/caten of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer SenalNo. Board No. Identificaton Replacement Stamped (Yes or No)

MSRV PILOT TARGET 001 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 161 N/A N/A N/A REPLACEMENT YES ROCK MSRV BODY TARGET 161 N/A N/A N/A REPAIRED YES ROCK

7. Desenpton of Work Replaced Main Steam Rerief Vatve S/N 189 and pilot S/N 522 with reworked body S/N 161 and new pilot S/N 001 Repaired Main Steam Rehef Vatve body SN 161 by machentna

8. Tests conducted. Hydrostate C Pneumatic D NominalOperating Pressure u Other _ Pressure 970 osi TestTemp. 200 *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings rnay be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

~

W/O No. R0725722 Sheet 2 of 2 I

l 1

FORM NIS-2 (BACK)

. 9. Remarks Manufacturers Data Report is traceable by PECO Work Orderomdane.

I Apphcable Manufacturers Data Reports to be attached Roolamd two stace pilot with three staae odot in acrordanw with PECO ECR 9842534 MSRV body SN 189 and pilot SW S22 were instabed durino a tr6 cycle outaae via Work Order C0179604 and reotaced 2R05.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ___ replacement conforms to the rules of the ASME Code,Section XI. repar or replacemerc Type Code Symbol Starnp NA Certificate of Autt.w.n. No. fM Exprabon Date NA Signed ** -

J H. Kramer. Enoineer Date July 9 .19 99 Wr'or Owners Desagnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersagned, holding a valid commason losued by the Nabonal Board of Boiler and Pressure Vessel Inspedors and the State or Province of PennsvNania and employed by H S B.1 & I Comoany of Hartford. CT in ths Owners Report dunng the penod N//1./99 to havy//

x# Mn' gpected the componer'ts desenbed

. and state that e to the best of my knowledge and belief, the Owner has pdfomied examnabons and taken'correctue rnessures desenbod in this Ownere Report in bocordance with the sequwements of the ASME Code, Season XI.

By signing this cettdicate nesther the inspedor nor his employer makes any warranty, expressed or implied, conceming the examinations and correctue measures described in this Owners Report. Furthermore, neither the inspector nor his employer

, shall be liable in any rnanner for arry personal irjury or property damage or a loss of any kind ansing from or connected with this inspechon-

/ # Niff

$ Commesions PA-2497 f.N & A inspectors Sagnature / Natorial Board, State Province, and Endorsements Date // 19 9k (12/82)

l FORM N!S-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Seebon XI

1. Owner PECO Enemy Company Date Juhr9.1999 Name 2301 Market Street. Philadelphia, PA 19101 Sheet 1 of 2 Address

2. Plant Limenck Generatina Station Unit 2 Narne .

P O Box 2300. Sanatoca. PA 19464-2300 Work Order No R0728131 Address Repair Organizaton P.O. No., Job No. etc.

~

3. Work Performed by PECO Enemy Company Type Code Symbol Stamp N/A Name Authonzaten No. N/A P O Box 2300. Sanatoaa PA 19464 2300 Expiration Date N/A Address

4. Identificaton of System Nuclear Boiler (System 041) h No APE-2MS PSV441-2F013E

5. (a) Applicable Construction Code ASME Ill 19 68 Editon. Summer 1970 Addenda. N/A Code Case (b) Appicable Edition of Seebon XI Utahzed for Repairs or Replacements 19 86

6. Identrficaten of Componerds Repaired or Reptamd and Reptamment Components Repaired, ASME Name of Name of Manufadurer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Idenbfcaten Replacement Stamped (Yes or No)

MSRV PILOT TARGET 009 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 188 N/A N/A N/A REPLACEMENT YES ROCK

. 1

7. Desenption of Work Replaced Main Steam Relief Valve S/N 176 and pilot S/N 519 with reworked body S/N 188 and new pilot S/N 009

8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperstng Pressure a Other. Pressure 970 osi TestTemp 200 *F.

NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St, New York. N Y.10017

~

W/O No. R0728131 Sheet 2 of 2 I

FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Report is tramable by PECO Work Order packsoe.

Apphcable Manufacturers Data Reports to be attached Replaced two staoe pilot with three staae pilot in acmrdance with PECO ECR 9842534.

MSRV body S/N 176 and pilot S/N 519 were installed durino a rnid-cycle outaae via Work Order C0181914 and replaced 2R05.

CERTIFICATE OF COMPLIANCE We artify that the statements made in the report are correct and this replacernent conforms to the rules of the ASME Code, Sedion XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiraten Date NA Signed , J.H. Kramer. Enoineer Date JuN 9 .19 99 Muner or Owners Designee, Tme CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commesen issued by the Natonal Board of Boiler and Pressure Vessel Inspedors and the State or Province of Penrmykania and employed by H S B 1 & l. Company of Hartford CT . haginspeded the components desenbod in ths Owners Report during the penod 4//f/99 to R////95P . and state that to the best of my knowledge and belief, the Owner has p6rforrded examinatens and taken f:orrectrie measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.

By signing this corblicate neither the Inspedor nor his employer makes any warranty, expressed or implied, concoming the a examinatens and correctrve measures described in the Owners Report. Furthermore, neither the inspector nor his employer shaB be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection.

Commesens PA-2497 l.N & A Natonal Board, State, Province, and Endorsements inspedors Sgnature [

Date N 19 ff

7 j

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Secton XI

1. Owner PECO Enerav Company Date July 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Genenstino Station Unit 2 Name .

P O.. Box 2300. Sanatoca. PA 19464-2300 Work Order No R0728010 Address Reper Organnaten P.O. No., Job No. etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O. Box 2300. Sanatoos. PA 19464 2300 Expraton Date N/A Address

4. Identification of System Nuclear Boiler (System 041) Line No. APE-2MS PSV-041-2F013F

5. (a) ApplicableConstruchonCode ASME lil 19 68 Edition, Summer 1970 Addenda. N/A Code Case (b) Applicable Edition of Secten XI Utilmed for Repaws or Replacements 19 86

6. Identificaten of Components Repaired or Replaced and Replacement Componer.ts Repaired, ASME Name of Name of Manufacturer Nabonal Other Year Built Reptamd, or Code Component Manufacturer Serial No. Board No. Identificaten Replacement Stamped (Yes or No)

MSRV PILOT TARGET 011 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 171 N/A N/A N/A REPLACEMENT YES ROCK I

7. Desenption of Work Reptemd Main Steam Relief Valve S/N 169 and pilot S/N 527 with reworked body S/N 171 and new pilot S/N 011.

8. Tests conducted: Hydrostatic D Pneumahc 0 NomnalOperating Pressure e Other _ Pressure 970 osi TestTemp. 200 'F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) scr.e 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is ,

recorded at the top of this form. l (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th SL, New York, N.Y.10017

l l

l l

W/O No. R0728010  !

Sheet 2 of 2 l l

l FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Report is traceable by PECO Wo* Order packaoe

. Apphcable Manufacturers Data Reports to be attached Replaced two stace pilot with three staoe oilot in somrdance with PECO ECR 98-02534 a  !

1 I

CERTIFICATE OF CORAPLIANCE We certify that the statements made in the report are corted and this teolacement conforms to the rules of the ASME Code,Section XI. repar or reptemment Type Code SymbolStamp NA CertAcate of Authornaten No. NA Expirabon Date NA Signed -

J H. Kramer. Enaineer Dele Juk 9 .19 99 (pilsner & Owner's Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION l 1, the undersgned, holdin9 a valid commason issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State l or Province of Pennsvivanis and employed by H S B I & l. Company of Hartford. CT havp wupected the wivv.46;. desenbod in ths Owner's Report dunng the period 4//X99 to JiKN//99 . and state that to the best of my knowledge and belief, the Owner has peflomfed exarmnations and 16 ken'correctrve rneasures described in this

• Owners Report in accordance with the requirements of the ASME Code, Semon XI.

l By sgning this certAcate neither the Inspector nor his employer makes any warranty, expressed or implied, conoeming the examinsbons and correctwo measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shes be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this

. Inspechon l Commasons PA-2497 f.N & A inspectors Signature / Natorei Board, State, Province, and Endorsements Date // 1979 (12/82) i

f I

l l

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS' As Required by the Provisions of the ASME Code Sechon XI l

1. Owner PECO Enerav Company Date Juty 9.1999 Name 2301 Market Street. Philadelohia. PA 19101 Sheet 1 of 2 Address

2. Plant Umerick Generatina Station Unit 2 Name .

P.O. Box 2300 Sanatoaa. PA 19464-2300 Work Order No. R0717635 Address Repair Organizaton P.O. No., Job No. etc.

~

l

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O. Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address

4. Identdication of System Nuclear Boiler (System 041) Une No APE-2MS PSV-041-2F013G l

S. (a) Applicable Construebon Code ASME til 19 68 Ednen. Summer 1970 Addenda, N/A Code Case (b) Applicable Edibon of Sedion XI Utilized for Repairs or Replacements 19 86

6. Identificaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufadurer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No) l MSRV PILOT TARGET 013 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 173 N/A N/A N/A REPLACEMENT YES ROCK

7. Desenption of Work Replaced Main Steam Retef Va e S/N 150 and oilot S/N 1211 with reworked body S/N 173 and new Dilot S/N 013.

8. Tests conduded: Hydrostate O Pneumatic D NominalOperating Pressure s Other., Pressure 970 osi TestTemp. 200 *F, NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on ead) sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l

1 l

l

I j

W/O No. R0717635 1 Sheet 2 of 2 i

l FORM NIS-2 (BACK)

I

9. Remarks Manufacturers Data Report is traceable by PECO Work Order osckaoe

. Apphcable Manufsaurers Data Reports to be attached Replaced two stace pilot with three staae Dilot In scoordance with PECO ECR 98-02534 MSRV body S/N 150 and pilot S/N 1211 were insulled durino a m&vele outaae via Work Order C0173759 and replaced 2R05.

CERTIFICATE OF COMPLIANCE We certdy that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of At,he No. NA Expershon Date NA Signed h - a h. - J H. Kramer, Enoineer Date Juhr9 .19 99 Wwner or Mrs Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a vahd commason issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B 1 & l. Company of Hartford. CT .

havy' the w %,in4. desenbed in ths Owners Report dunng the period Nh2/PF to R/// . and state that to the best of my knowledge and belief, the Owner has perf6rmocfexamenatons and tskerf correaive measures desenbod in this

• Owner's Report in accordance with the requirements of the ASME Code, Sechon XI.

By siDning this cert 6cate neither the inspedor nor his employer makes any warranty, expressed or implied, concoming the examinations and corredsve measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal iriury or property damage or a loss of any kind arising from or connected with this

. Inspection.

Commesions PA-2497 l.N & A inspedors Sgnature

[ Natonal Board, State, Province, and Endorsements Date 8/# 19 7 I (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ~

As Required by the Provisions of the ASME Code Section XI

1. Owner PECO Enerav Company Date July 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No R0771716 Address Repair Organctation P.O. No., Job No etc.

3. Work Performed by PECO Eneruv Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P.O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address

4. Identification of System Nuclear Boiler (System 041) Line No APE-2MS PSV-041-2F013H

5. (a) Applicable Construdion Code ASME 111 19 68 Edition, Summer 1970 Addcnda, N/A Code Case (b) Applicable Edition of Section XI Utikzed for Repairs or Replacements 19 86

6. Identification of Components Repaired or Replamd and Replacement Components Repaired, ASME Name of Name of Manufacturer Natx)nal Other Year Built Repta d, or Code Component Manufacurer Serial No. Board No. Identification Replacement Stamped (Yes or No)

MSRV PILOT TARGET 002 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 178 N/A N/A N/A REPLACEMENT YES ROCK

7. Desenption of Work Repla d Main Steam Refef Vatve S/N 174 and pilot S/N 504 with reworked body S/N 178 and new pilot S/N 002

8. Tests conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure m Other _ Pressure 970 - osi TestTemp. 200 *F.

NOTE: Supplemental sheets in form of lists, sketches, or dravvings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is ,

recorded at the top of this form.

l (12/82) This Form (E00030) may be obtained frorn the Order Dept., ASME, 345 E.47th St., New York, N.Y,10017

W/O No. R0771716 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Report is traceable by PECO Work Order osckaoe.

Appbcable Manufadurers Data Reports to be attached Replaced two staoe oilot with three staoe pilot in accordance with PECO ECR 96-02534 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this foolawment conforms to the rules of the ASME Code, Sedion XI. repaar or repiscoment Type Code Symbol Starnp NA Certificate of Authornahon No. NA Expirabon Date NA Signed -

J H. Kramer. Enoineer Date July 9 .19 99 Qlmer or Owners Designee, Tatie CERTIFICATE OF INSERVICE INSPECTION 1, the undersgned, holding a valid commesen issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvhrania and employed by H S B l & l. Cormany of Hartford. CT . have inappded the wivv,w4. desenbod in this Owners Report dunng the penod N#2/99 to R////79 . and state that to the best of my knowledge and belief, the Owner has perf6rms6 exammahons and taken dorrective measures desenbod in ths owner's Report in accordance with the requirements of the ASME Code, Sechon XI.

. By signing this certdicate neither the inspedor nor his employer makes any warrenty, expressed or implied, concoming the exarninations and corredsve measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal iriury or property damage or a loss of any kind arising from or connected with this inspecten.

Commations PA-24971.N & A V inspedors Sgnature / Natenal Board, State, Province, and Endorsements f Date # 19 ff (12/82) l l

l l

l

l FORM NtS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisaons of the ASME Code Sechon XI

1. Owner PECO Enerov Company Date July 9.1999 l Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address i

2. Plant Limerick Generatina Station Unit 2 Name

• P O. Bor 2300. Sanatoos. PA 19464-2300 Work Order No R0728102 Address Repair Organnation P.O. No., Job No. etc.

~

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name AG-W, No. N/A l P.O. Box 2300. Sanatoos. PA 19464-2300 Expiration Date N/A

4. Identificebonof System NucisarBoiler (System 041) Line No APE-2MS PSV-0412F013J

5. (a) Applicable Construdson Code ASMEIll 19 68 Edition. Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Sedson XI Utilmed for Repaws or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Buiit Replaced, or Code l Component Manufacturer Serial No. Board No. Identificehon Repisoement Starnped (Yes or No) l l MSRV PILOT TARGET 004 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 165 N/A N/A N/A REPLACEMENT YES j ROCK l heat code 'D9" l

(5)1NLET CARDINAL heat # N/A 114-93783

• N/A REPLACEMENT NO STUDS INDUSTRIAL 8869139 POW 628644 heat code (10) 1NLET NOVA 'QU9' N/A 114-93784

• N/A REPLACEMENT NO NUTS MACHINE heat # 93894 POW 628286 l

• Tracentety per PECO Part Code Number,

7. Desenphon of Work R= alar =d Main Steam Relief Valve S/N 180 and pilot S/N 501 with reworked body $/N 165 and new pilot S/N 004

8. Tests conducted: Hydrostahc D Pneumatic D NomenalOperahng Pressure a Other _ Pressure 970 pal Test Temp.1*F.

NOTE: Supplemental shoots in form of lists, sketches, or drawin9s may be used, provided (1) ske 81/2 in. x 11 in., (2) inforrna-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded atthe top of this form.

(12/82) This Form (E00030) may be obtained frorn the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 ,

k l

l W/O No. R0728102 Sheet 2 of 2 FORM NIS-2 (BACK)

. 9. Remarks Manufacturers Data Report is tramable tv PECO Work Order osckaoe Apphcatde Manufacturers Data Reports to be attached Replaced two staae pilot with three stage pilot in accordana with PECO ECR 98-02534. l l

l I

CERTIFICATE OF COMPLIANCE We certh that the statements made in the report are correct and this replacement cortforms to the rules of the ASME Code,Section XI. repair or ropter. ament )

i Type Code Symbol Stamp NA Certificate of Authorizabon No. NA Expirabon Date NA Signed .

J H. Kramer. Enaineer Date July 9 .19 99 C$mer or Owners Desagnee, Title i

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, hokhng a valid commesson issued by the Nabonal Board of Boiler and Pressure Vessel irspedors and the State or Province of Pennsvivania and employed by H S B I & I. Comoany of Hartford. CT have m' ageded the 00iryOr res descnbod in this Owners Report dunng the pened W/2/ff to f////9'9 . and state that a to the best of my knowledge and belief, the Owner has performed exammahons and then torredive measures described in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.

By signing this certificale neither the inspedor nor his employer makes any warranty, expressed or implied, concoming the examinabons and correcbve measures desonbod in this Owners Report Furthermore, neither the inspector nor his employer

. shal be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneded with this inspediort

1. Commessons PA-24971.N & A Inspectors Segnature / Nabonal Board, State, Province, ar.d Endorsements Date # 1997 (12/82)

i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l

As Required by the Provmons of the ASME Code Sechon XI

1. Owner PECO Enerav Company Date JuN 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatino Station Unit 2 Name ,

P.O Box 2300. Senatoaa. PA 19464-2300 Work Order No. R0728470 Address Repar Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authortzaten No. N/A P O Box 2300. Senatoos. PA 19404-2300 Expraton Date N/A Address I

4. Identdicaton of System Nuclear Boiler (System 041) Line No. APE-2MS PSV-041-2F013K

5. (a) Appicable Construchon Code ASME lit 19 68 Edihon, Summer 1970 Addenda, N/A Code Case (b) Applicable Eddion of Sechon XI Uuined for Repers or Repiamments 19 86

6. Identdicaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Nabonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. IdentAceton Replamment Stamped (Yes or No)

MSRV PILOT TARGET 010 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 185 N/A N/A N/A REPLACEMENT YES ROCK

7. Descripton of Work RMW Main Steam Relief Valve SN 147 and pilot SN 503 with reworked body SN 185 and new pilot SN 010

8. Tests conduded: Hydrostate O Pneumste O NomrialOperahng Pressure a Other_ Pressure 970 osi TestTemp. 700 'F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each shoolis numbered and the nurr;4r of sheets is recorded at the top of this form.

(12/B2) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 I

p.

W/O No. R0728470 Sheet 2 of 2 FOlttiNIS4(BAClQ

9. Romerks Manuts&ners Date Resort is tr" tw PECO Work Order ==*-

Apphcehte Menulemmers Date Reports to be attamed Racisced two steos Dilot with three stese caot in accordents wth PECO ECR 98-02534.

, MSRV body SAN 147 and niet S/N 503 were '. - ' durino a e r+2 outsee via Work Order C017avo2 and ; M+12R05.

CERTFICATE OF COlm. LANCE We certify that the statements enede in the report am coned and this reoisonment conforms to the rules of the ASME Code, Sedion XI. mpair or repiscoment Type Code Symbol Stamp NA Cwecate of Authoritahon No. NA Empiraten Date NA

&gned .

J.H. Kramer. Lea Date Julv9 .19 99 QImor 3r Owners Designes, Title CERTIPICATE OFlitBWMCEINBPECTIDN 1, the underegned, holdmg a valid commason leeued by #m Notenal Board of Boger and Pmeoum Vessel inspectors and the State or Province of Pennevivenis and employed try H.S.B.I.A 1. Comneny of Hartkud. CT havg ingpected the components described in this Owners Report dunng the pened Nh2/P9 to AN/#9 .and state that .

to the best of my knowledge and behof, the Owner has :Z..J'n _ and Idke(coneeuve measures described in this l Owners Report in accordance wth to regulaments of the AStE Code, Secten XI. l By signinD #ds certittete noilhor be inspector nor his employer males any warranty, expreened or impled, concoming the  !

+ examinstens and conodive mascuss descreed in this Owners Report Furthermom, nether the inspector nor his employer l shal be liable in any rnanner for any personal lriury or pmporty damage or a loss of any kind arising from or conneded with this inar=*%

Commissions PA-2497 f.N & A inspectors Sgnatum / Naboned Board, State, Provmos, and Endorsements j Date // 19 N (12ss2) i i

l I

l

FORM NIS-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS ~

As Required by the Provisions of the ASME Code Secton XI

1. Owner F1 O Eneroy Company Date July 9.1999 Name 2301 Market Street. Philadelphia _ PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P.O. Box 2300. Senatoaa. PA 19464-2300 Work Order No R0777537 and C0187530 Address Repair Organcaten P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Comoany Type Code Symbol Stamp N/A Name Authonzaton No, N/A P.O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address

4. Identification of System _ Nuclear Boller (System 041) Line No APE-2MS PSV-041-2F013L

5. (a) Applicable Construction Code ASME lit 19 68 Edition, Summer 1970 Addenda. N/A Code Case (b) Appleable Editon of Sedion XI Utilmed for Repaus or Replacements 19 86

6. Identificaton of Components Repaired or Replaced and Repta ment Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replamd, or Code Component Manufadurer Serial No. Board No. Identificaton Repla ment Stamped (Yes or No)

MSRV PILOT TARGET 005 N/A N/A 1998 REPLACEMENT YES ROCK l

MSRV BODY TARGET 166 N/A N/A N/A REPLACEMENT YES ROCK MSRV BODY TARGET 166 N/A N/A N/A REPAIRED YES ROCK =

l

7. Desenpton of Work Replaced Main Steam Relief Valve S/N 148 and oilet S/N 502 with reworked body S/N 166 and new Dilot S/N 005 Reostred Main Steam Relef Vane body S/N 166 by weklina

8. Tests conducted: Hydrostate D Pneumatic 0 NominalOperating Pressure a Other., Pressure 970 osi TestTemp. 200 *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings rnay be used, provided (1) size 81/2 in. x 11 in.,(2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each steet is numbered and the number of sheets s recorded at the top of this form.

(12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

1 W/O No. R077537 and C0187530 Sheet 2 of 2 l

l l

FORM NIS-2 (BACK) l

. 9. Remarks Manufacturers Data Report is traceable by PECO Work Order packsoe.

Appicable Manufacturers Data Reports to be attached Replaced two staoe pliot with thme staae pilot in accordance with PECO ECR 9842534 CERTIFICATE OF COMPLIANCE We artify that the statements rnade in the report are correct and this reotacement conforms to tfe rules of tie ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authortzaton No NA Expiraton Date NA Signed . _

J H. Kramer. Engineer Date July 9 .19 99 Qinrner cir Owners Desegnee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commasen lasued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvania and employed by H S B 1 & l. Company of Hamord. CT . have Wed the components desenbed in this Owners Report dunng the penod 3/S/ /M to A ////5P9 . and state that

• to the best of my knowledge and belief, the Owner has pdrformbd examinauons and tak6n cxfrrectue measures described in this Owners Report in aa:ordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer

. shall be liable in any manner for any personal triury or property damage or a loss of any kind arising from or connected with this inspecbort Commssions PA-24971.N & A Inspectors Sgnature / Natenal Board, State, Provina, and Endorsements Date / 19 77 (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMEr4TS" As Required by the Provisions of the ASME Code Sedon X1

1. Owner PECO Enemy Company Date Juhr 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant timerid Generatino Station Unit 2 Name .

^

P.O. Box 2300. Sanatoca. PA 19464-2300 Work Order No R0727756 Address Repar Organgston P.O. No., Job No etc.

3. Work Performed by PECO Enemy Company Type Code Symbol Otamp N/A Name Authornaton No. N/A P O. Box 2300. Sanatoos. PA 19464-2300 Expiraton Date N/A Address

4. Identificaten of System Nuclear Boiler (System 041) Line No APE-2MS PSV-041-2F013M

5. (a) Applicable Construmon Code ASME Ill 19 68 Edten. Summer 1970 Addenda N/A Code Case (b) Apphcable Editon of Se@on XI Uhleed for Repass or Replacements 19 86

6. Ident6caton of Componerts Repened or Replaced and Repiscoment Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufadurer Serial No. Board No. Ident6 cation Replacement Stamped (Yes or No)

MSRV PILOT TARGET 012 N/A MA 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 168 N/A MA N/A REPLACEMENT YES ROCK MAIN DISC TARGET 4548 MA 114-76023

• MA REPLACEMENT YES ROCK POW 350395

• Traceabuy per PECO Part Code Number 7, Descnphon of Work Roolaced Main Steam Relief Valve S/N 190 and pilot S/N 528 with reworked body S/N 168 and new pilot S/N 012,

8. Tests conduded: Hydrostahc 0 Pneumate D NomenalOperahng Pressure a Other,,, Pressure,17Q,_ psl Test Temp. E*F.

NOTE: Supplemental sheets in fami of lists, sketees, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-I tion in hems 1 through 6 on this report is irm on sad sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/B2) This Form (E00030) may be obtained from the Order DepL. ASME,345 E.47th St., New York, N.Y.10017

W/O No. R0727756 Sheet 2 of 2 FORM NIS-2 (BAClQ

9. Romerks L__"m Data F 1is ^ tw PECO ^."M W -- - ^ ---

• Apphostus Menulocawers Dale Reports to tuo sendied Ph two stone ellot wth three eBot in - __.n- wHh PECO ECR 96 Jim MSRV body SIN 190 and oHot SIN 528 wem inelated durino e mid cycle outene via Work Order C0182285 and racisoed 2R05 CERTtFICATE OF CORIPUANCE We certify that the statements snede in the sport am conect and this soolacement conforms to the rules of the ASME Code, Sechon XI. sepairor soplacement Type Code SyntolStamp NA Cerencate of Aulhortsamon No. NA Expirshon Date NA signed b ' .

J.H. Kramer Enalneer Date Julv9 .19 99 gmerYr Owners Deeense,Tius CIsmFICATE OFINSERVICE INSPECTION 1, the underegned, hokhng a veld commesion leeued by the Nabonel Board of Bouer and Possum Vessel lnepectors and the State or Provinos of T., -- *- - - - . _ and employed try H.S.B.I.& l. Comment of Henkud. CT have e' qpected the components descreed in this Owners Report duetng the perted 4h2/99 to Al2////79 .and state that to the best of my knowledge and benef, the Owner has perfumsk enemmebons and tenerfoonoceW measums described in this

• Owners Report in accoedence wth the sequeements of the ASME Code, Secean XI.

By signing this certlRoste nenhor Die inspector not his employer mehes any warranty, exposeed or implied, conoommg the examinehons and conective measums deserted in Wile Owners Report. Furthermore, nether the inspector nor his employer ehal be noble in any menner tor any personalIriury or property damage or a loss of any kind erleing from or connected with this

. inspechent 77## Commiseens PA-2497 I.N & A Onepectors Signatum / Netonal Board. State. Prowwwe, and Endorsements den Al/ 19 99 e i (12/82)

i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT'S As Requwed by the Provisions of the ASME Code Secton XI

1. Owner PECO Enerav Company Date July 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P O. Box 2300. Senatoos. PA 19464-2300 Work Order No. R0724266 Address Repar Organization P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Senatona. PA 19464-2300 Experation Date N/A Address

4. Identincate of System Nuclear Boiler (System 041) Line No. APE-2MS PSV-0412F013N

5. (a) Appbcable Construchon Code ASME lil 19 68 Edition. Summer 1970 Addenda. N/A Code Case (b) Appkcable Edibon of Section XI Utskred for Repers or Replacements 19 86

6. Ident:6cahon of Components Repaired or PYW and Rapiecement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificatm Replacement Stamped (Yes or No)

MSRV PILOT TARGET 007 N/A MA 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 167 MA N/A N/A REPLACEMENT YES ROCK

7. Descriphon of Work Raal*W Main Steam Relief Valve S/N 175 and Dilot SN $28 with reworked body SN 167 and new Dilot S/N 007.

8. Tests conducted: Hydrostabc 0 Pneumate D NominalOperahng Pressure a Other,,, Proesure 979 ,,,psl Test Temp. E*F.

NOTE supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtaened from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

1 W/O No. R0724266 Sheet 2 of 2 l

l FORM NIS-2 (SACK)

9. Remarks Manufacturem Data Report is troosable by PECO Work Order oscksoe.

. Apphcable Manufacturers Data Reports to be attached Replaced two stace pilot with three staoe pilot in accordance with PECO ECR 9642534 e

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and the replacement conforms to the rules of the ASME Code, Sedian XI. repair or replacement Type Code Symbol Stamp NA CertAcate of Authonzabon No. NA Expirabon Date NA l Signed b . -

J H Kramer. Enaineer Date JuN 9 .19 99 QRrner or Owners Desgnee, Title j l

CERTIFICATE OF INSERVICE INSPECTION 1, the undersgned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessel inspectors and the State or Prtmnoe of Pennsykanis and employed by H S B I & l. Company of Hartford. CT hav A /e///99 e'speded the wiW=i,;e desenbod in the Owners Report dunng the penod 4//2/99' to . and state that to the best of my knowledge and belief, the Owner has perf6rmetf exarrunabons and tali r,'w4ve rneasures desenbod in this

• Owner's Report in accordance with the requwements of the ASME Code, Sedion XI.

By signing this certAcate neither the inspedor nor his employer makes any warranty, expressed or implied, concoming the examinations and conectne measures described in this Ownsfs Report Furthermore, neither the inspector nor his employer shal be liable in any rnanner for any personal irjury or property damage or a loss of any kind arising from or conneded with this

. inspecion.

Commissions PA-2497 f.N & A V inspectors Sgnature / Nabonal Board, State, Provnoe, and Endorsements Date 8 / 19 9 9 (12/82)

1 l

\

1 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ~

As Required by the Provisions of the ASME Code Sedon XI

1. Owner PECO Enercy Company Date July 9.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerk* Generatino Station Unit 2 Name .

P O Box 2300. Sanatoca. PA 19464-2300 Work Order No R0727757 Address Repar Organcaton P.O. No., Job No. etc.

3. WoA Perforrned by PECO Enercy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P.O Box 2300. Sanatoca. PA 19464-2300 Expiraten Date N/A Address

4. Identificaton of System Nuclear Boiler fSystem 041) Line No APE-2MS PSV-041-2F013S

5. (a) Applicable Constructen Code ASME 111 19 68 Edibon, Summer 1970 Addenda, N/A Code Case (b) Applicable Edition of Sedon XI Utilized for Repairs or Replacements 19 86

6. Identification of Components Repaired or Repta d and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer SenalNo. Board No. Identification Replacement Stamped (Yes or No)

[

MSRV PILOT TARGET 014 N/A N/A 1998 REPLACEMENT YES ROCK MSRV BODY TARGET 182 N/A N/A N/A REPLACEMENT YES ,

ROCK 1

MAIN DISC TARGET 4542 N/A 114-76023

• N/A REPLACEMENT YES l PO#350395 j ROCK .

l MAIN SEAT TARGET 54 N/A 114-76024

• N/A REPLACEMENT NO ROCK PO# 204066 ,

• Tra ability per PECO Part Code Number.

7. Descripbon of Work Recla d Main Steam Reref Valve S/N 145 and pilot S/N 1215 with reworked body S/N 182 and new pilot S/N 014.

8. Tests conduded: Hydrostatic D Pneumatic 0 NominalOperating Pressure a Other_ Pressure 970 osi TestTemp. 200 'F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) rnay be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

W/O No. R0727757 Sheet 2 of 2 FORM NIS-2 (BACK)

. 9. Remarks Manufacturers Dets Report is fra able by PECO Work Order packsae Appicable Manufacturers Data Reports to be attached Repla d two stace ellot with three staos pilot in accordance with PECO ECR 9M2534 MSRV body S/N 145 and oilot S/N 1215 were installed dunna a md-evele outace via Work Order C0177442 and replaced 2R05 CERTIFICATE OF COMPUANCE We certify that the statements inade in the report '.:= corred and this reotamment conforms to the rules of the ASME Code, Sedion XI. repar or replacement Type Code Symbol Stamp NA Certifcate of Authorization No. NA Expiration Date NA Signed et . - - J H Krarner. Enaineer Date JuN 9 .19 99 Q wner 6r Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the urdersigned, holding a vald commisson issued by the National Board of Boiler and Pressure Vesse! Inspectors and the State or Provina of PennsvNania and employed by H S B i & I Company of Hartford. CT . . have inspected the components desenbed in ths Owners Report dunng the penod 4 //2./W to A////ff . and state that

. to tha hest of my knowledge and beief, the Owner has gferfor/ned examinatens and tak'en dorrectsve measures described in this Or"xt i Report in accordanz with the requirements of the ASME Code, Sechon XI.

.N signing this certthcate neither the inspector nor ha employer makes any warranty, expressed or implsed, conceming the examinatens and correctrve rneasures described in this Owners Report. Furthermore, neither the inspector nor his employer

. shall be liable in any manner for any personal irjury or property damage or a loss of any kind arising from or conneded with the inspecten.

8W . #Nh - Commissions PA-2497 f.N & A inspectors Segnature / Natonal Board, State, Provme, and Endo sements Date // 19 ff (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Secten XI

1. Owner PECO Enerov Company Date Jutv 15.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limenck Generatina Station Unit 2 Name ,

P O Box 2300 Sanatoca. PA 19464-2300 Work Order No C0182035 Address Repair Organization P.O. No. Job No. etc.

3. Work Performed by PECO Enerov Company Type Code Symbol Stamp N/A Nar.4 Authonzation No. N/A 1

1 P O. Box 2300. Sanatoaa. PA 19464-2300 Expiraten Date N/A l Address

4. Identfcation of System Reactor Water Clean-up (System 044) Line No ECC-203 PSV-044-208

5. (a) Applicable Constructen Code ASME Ill 19 74 Edition, Winter '74 Addenda, N-416-1 Code Case (b) Applicable Editson of Sechon XI Utikred for Repairs or Replacements 19 86

6. Identrfication of Components Repaired or Replamd and Replacement Components Repaired. ASME Name of Name of Manufacturer National Other Year Built Rep! aced, or Code Component Manufacturer SenalNo. Board No. Identification Repisoement Stamped (Yes or No)

ECC-203-2 PIECE # 7 WFI HEAT CODE N/A *114-92059 N/A REPLACEMENT NO COUPLING NUCLEAR '998XNA' PO# 166983 ECC-203-2 PIECE # 8 COMBUSTION HEAT # N/A

• 114-90025 N/A REPLACEMENT NO i 1-1/2" PIPE ENGINEERNG L31377 PO# 628285 l

l ECC-203-2 NEWMAN PIECE # 9 FLANGE & HEAT # K-502 N/A

• 114-00764 N/A REPLACEMENT NO FLANGE FITTING CO. PO# 166980

( 4 ) 1' NOVA HEATS N/A

• 114-92584 N/A REPLACEMENT NO .

STUDS MACHINE 96469 PO#159325 1

1 (8)1' NUTS NOVA HEAT # N/A

• 114-92049 N/A REPLACEMENT NO l MACHINE 8098856 PO#159325 ,

l

• Traceability per PECO Part Code Number 7, Desenpton of Work installed new 1-1/2"pioina and relocated relef valve

8. Tests conducted: Hydrostate D Pneumate O Nominal Operating Pressure e Other .,, Pressure 1200 osi Test Temp. N/A 'F.

NOTE. Supplementat sheets in form of lets, sketches, or drawings rrisy be used, provided (1) size 81/2 in. x 11 in., (2) informa-ten in items 1 through 6 on the report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this forrn.

\ , _ _ ._ _

W/O No. C0182035 Sheet 2 of 2 FORM NIS-2 (BACK) 9 Remarks Work completed in accordance with PECO Enaineerino Chance Recuests 98-00954 Apphcable Manufacturers Data Reports to be attached 1

i e

CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code.Section XI. repair or replacement Type Code Symbol Stamp NA Certifcate of Authortzston No. NA Expiraton Date NA Signed N. b - J H Kramer. Enaineer Date Juty 15. .1999 EAvner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION

l. the undersigned, holding a valid commssion asued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsytvania and employed by H S B t & I ComDany of Hartford CT . h insp9cted the components desenbed  !

in this Owners Report dunng the penod A/27 NSE to 7 3/99 . and state that i to the best of my knowledge and belief, the Owner has p6rfom4ed examinatens and traken a6rrective measures desenbed in this )

Owners Report in accordance with the requirements of the ASME Code, Secten XI.

By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the j examinations and corrective measures described in ths Owners Report. Furthermore, neither the inspector not his employer j

, shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or cont Med with this inspecton.

l 2 Commissions PA-24971.N & A Infpectors Sgnature / Natonal Board, State. Province, and Endorsements Date 231999 (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Section XI

1. Owner PECO Eneroy Company Date Ju'y 15 1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatino Station Unit 2 Name .

P O Box 2300. Sanatoaa PA 19464-2300 Work Order No C0182375 Address Repair Organization P.O. No., Job No etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address

4. Identrficaton of System ReactorWater Clean-up (System 044) , pne No DBB-205 HV-044-2F039

5. (a) Applicable Construction Code ASME Ill 1971 Editen, Winter 1972 Addenda, 1567.1516-2 1622 and 1682 Code Case (b) Applicable Edition of Secten XI Utilized for Repairs or Replacements 19 86 6 Identification of Components Repared or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificaten Replacement Stamped (Yes or No) 53-1-1 HV-044- ANCHOR / N/A N'A 1995 REPLACEMENT YES 2F039 DARLING VALVE DISC ANCHOR / N/A

• 114-78823 1997 REPLACEMENT YES DARLING HA A633 PO# 257805

7. Desenpton of Wo* Replaced 4" flanced check valve with rebuilt valve

8. Tests conducted: Hydrostatic : Pneumatic NominalOperating Pressure a Other. Pressure 1050 osi Test Term. N/A *F.

NOTE: Supplemental sheets in form of ists, sketches, or drawings may be used, provided (1) sLze 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on ths report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

1 1

I W/O No. C0182375 Sheet 2 of 2 8

FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Reports are traceable by PECO work order packaoe Apphcable Marsufacturers Data Reports to be attached I

e =

CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are correct and this replacement conforms to the rules of the ASME Code, Sedon XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzation No. NA Expiraton Date NA Signed b .

J H Kramer (Encineer) Date JuN 15 .19 99

@wner or' >nners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION  !

I 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State l or Province of Pennsvtvania and employed by H S B I & I Company of .

Hartford. CT . , havejnspecjed the components desenbed I I

in this Owners Report dunng the penod S /2 7/955 to '/'/ 23/99 . and state that to the best of my knowledge and behef, the Owner has gferform6d examinstons and talfen efective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

. By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspecton.

Commissions PA-2497 I N & A inspectors Sgnature / Natonal Board, State, Province, and Endorsements Date M 19 97 (12/82)

l I

I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Secten XI

1. Owner PECO Eneroy Company Date July 15 1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatino Station Unit 2 Name .

P O Box 2300 Sanatoaa PA 19464-2300 Work Order No C0176490 Address Repair Organization P.O. No., Job No etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiraton Date N/A Address

4. Identifcaten of System Stand By Liould Control (System 048) Line No ECB-214 2B-P208

5. (a) Applicable Constructen Code ASME lil 19 68 Editen. N/A Addenda, N/A Code Case (b) Apphcable Editen of Secton XI Utilized for Repairs or Replacements 19 86

6. Identifcation of Components Repaired or Rep 4ced and Replacement Components Repaired, ASME Name of Name of Manufadurer Natonal Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or No)

STUFFING UNION HEAT # N/A

• 114-76629 N/A REPLACEMENT NO BOX GLAND PUMP 651023 POW 157393

• Traceability per PECO part code number. *

7. Desenption of Work Replaced one (1) pump stuffino box oland

8. Tests conducted: Hydrostatic C Pneumate O NominalOperating Pressure e Other_ Pressure 1250 osi Test Temp. N/A *F.

NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) Informa-ton in items 1 through 6 on the report s included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

W/O No. C0175490 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks None Appicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLEANCE We certify that the statements made in the report are tx)rrect and this replacement conforms to the rules of the ASME Code, Sedon XI. repair or replacement Type Cooe Symbol Stamp NA Certificate of Authorizaten No. NA Expiration Date NA Signed . -

J H. Kramer (Enaineer) Date Ju915 .19 99 CAvner or Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a vald commesion issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of PennsvWania and employed by H S B l & 1 Company of Hartford. CT ected the components desenbod in ths Owners Report dunng the penod 9/n/9A to havejnsp/f9 R//2 . and state that to the best of my knowledge and behef, the Owner has herf6rmed examinstens and takdn cofren:mve measures described in this Owners Report in accordance wrth the requirements of the ASME Code, Secten XI.

. By sgning this certdicate neither the Inspedor not his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures described in the Owners Report. Furthermore, neither the inspector nor his employer shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

/M Commissions PA-2497 i N & A inspectors Sgnature / Natonal Board, State, Province, and Endorsements Date 8 2.1999

/

(12/82)

)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS-As Required by the Provisions of the ASME Code Sedion XI l

14 Owner PECO Enerav Company Date .tulv15 1999 Name l

2301 Market Street. Philadelphe PA 19101 Sheet i of 2 Address

2. Plant timenck Generatina Staten Unit 2 Name ,

P O Box 2300. Senatoca. PA 19464-2300 Work Order No C0175495 Address Repair Organcaton P.O. No., Job No. etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authorgabon No. N/A P O. Box 2300. Sanatoca, PA 19464-2300 Expiration Date N/A Address 4 ldentifcaton of System Stand By Liouid Control (System 048) Line No ECB-214 2C-P208

5. (a) Apphcable Construction Code ASME III 19 68 Editon, N/A Addenda. N/A Code Case (b) Applicable Edition of Secton XI Utilmed for Repairs or Replacements 19 86

6. Identificaton of Components Repaired or Replaud and Replacement Components I Repaired, ASME Name of Narne of Manufacturer Nabonal Other Year Built Replaced, or Code Component Manufacturer SenalNo. Board No. Identificaton Replamment Stamped (Yes or No)

STUFFING UNION HEAT # N/A *114-76629 N/A REPLACEMENT NO BOX GLAND PUMP 8656334 PO# 157393 STUFFING UNION HEAT # N!A

• 114-76629 N/A REPLACEMENT NO BOX GLAND PUMP 99 POW 161989

• Tracentulity per PECO part code number.

7. Desenpton of Work leplaced two (2) pump stuff:no box clands E Tests conducted. Hydrostate D Pneumate O NominalOperating Pressure a Other _. Pressure 1250 osi Test Temp. N/A 'F.

NOTE: Supplemental sheets in form of ists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet. and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

W/O No. C0175495

~

Sheet 2 of 2 FORM NIS-2 (BACK)

. 9. Remarks None Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Secten XI. repair or replamment Type Code Symbol Stamp NA Certificate of Authonzation No. NA Expiration Date NA Signed .

J H Kramer (Encineer) Date Jutv 15 .19 99 Wr or Owners Desgnee, Tttle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a vahd commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State  !

or Province of Pennsylvania and employed by H S B I & I Company of I Hartford. CT ected the components desenbod )

in tna Owners Report dunng the penod 9/n/9JE to have ANZ psp /f9 . and state that

• to the best of my knowledge and belef, the Owner has po'rforrhed examinatons and take'n cofrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing ths certrhcate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures riescribed in this Owners Report. Furtherrrore, neither the inspector nor his employer

, shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecton.

Commssions PA-24971.N & A Inspectors Signature / Natonal Board, State Province, and Endorsements j Date 8 /2 19 ff f

(12/B2) l l

\

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS" As Required by the Provisions of the ASME Code Seebon XI

1. Owner PECO Enerov Company Date July 15.1999 Name ,

2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P O Box 2300. Sanatoos. PA 194G4-2300 Work Order No C0182495 Address Repair Organization P.O. No., Job No. etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzaton No. N/A P O Box 2300. Sanatona. PA 19464-2300 Expiration Date N/A A*$ress

4. Identificaton of System Stand-by Liouid Control (System 048) Line No ECB-214 XV-048-2F004C

5. (a) Applicable Construction Code ASME 111 19 68 Editon. N/A Addenda, N/A Code Case (b) Appicable Edition of Sechon XI Utilized for Repairs or Replacements 19 86

6. Identificaten of Components Repaired or Replamd and Replacernent Components Repaired. ASME Name of Narne of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identrlicution Replacement Stamped (Yes or No)

INLET CONAX 5358 5358 *114-77023 1997 REPLACEMENT NO FITTING BUFFALO POW 159052 TRIGGER CONAX 5318 5318

• 114-77023 1997 REPLACEMENT NO BODY BUFFALO PO# 159052

• Traceability per PECO Part Code Number.

7, Desenpton of Work Replaced explosive valve inlet fittino and tracer body.

8. Tests conducted: Hydrostatic D Pneumatic 0 NominalOperating Pressure a Other_ Pressure 1250 osi Test Temp. N/A *F.

NOTE Suppiernental sheets in form of irsts, sketches, or drawings may be used, provided (1) size B 1/2 in. x 11 in., (2) informa- ,

tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is j recorded at the top of the form.

(12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l i

l l

\

W/O No. C0182495 Sheet 2 of 2 l

FORM NIS-2 (BACK) l

9. Remarks Manufacturers Data Reports are tramable by PECO Work Order packsoe

. Applicable Manufacturers Data Reports to be attached d inlet fittino and tnocer body were constructed in accordan with ASME til.1977 eddion with Summer 1977 addenda CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replamment conforms to the rules of the ASME Code,Section XI. repair or reptemment Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA ]

Sgned b- .

J H. Kramer . Enoineer Date Jutv 15 .19 99 Ewner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Provrice of Pennsvivania and employed by H S B l & 1 Company of Hartford. CT , . havejnspegled the components desenbed in this Owners Report dunng the penod 4//2/99 to 7/'7T/ 9'P . and state that to the best of my knowledge and belief, the Owner has per16rmed examinations and tafien coffective measures described in this

. Owners Report in accordarice with the requirements of the ASME Code,Section XI.

By signing this artificate neither the Inspector nor his employer makes any warranty, expressed or irnplied, conceming the examriatons and corrective measures described in this Owners Report. Furthermore, nefther the inspector nor his employer shall be liable in any manner for any personal iriury or property damage or a loss of any kind ansing from or connected with this

, inspection.

M h Comrnissions PA-2497 i N & A V ~ Inspedc?s Sgnature / National Board, State, Province, and Endorsements Date 2 J 19 SP'f (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS-As Required by the Provisions of the ASME Code Secten XI

1. Owner PECO Eneroy Company Date July 15.1999 Name ,

2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P O Box 2300. Sanatoaa PA 19464-2300 Work Order No R0619495 Address Repair Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Senatoaa. PA 19464-2300 Expiration Date N/A Address

4. Identication of System Stand-by Liauid Control (System 048) Line No ECB-214 XV-048-2F004B

5. (a) Applicable Construebon Code ASME lit 19 68 Editen, N/A Addenda. N/A Code Case (b) Appleable Edition of Secten XI Utilized for Repairs or Replacements 19 86

6. Identifcaten of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identrfcation Replacement Stamped (Yes or No)

INLET CONAX 5568 5568

• 114-77023 1998 REPLACEMENT NO FITTING BUFFALO PO# 167481 TRIGGER CONAX 5571 5571

• 114-77023 1998 REPLACEMENT NO  !

BODY BUFFALO PO# 167481 )

= 1

• Traceability per PECO Part Code Number.

7. Desenpton of Work Replaced explosive valve inlet fittina and tricoer body

8. Tests conducted: Hydrostatic : Pneumate D Nominal Operating Pressure a Other _ Pressure 1250 osi Test Temp. N/A *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) infomia-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N Y.10017

i I

W/O No. R0619495 Sheet 2 of 2 FORM NIS-2 (BACK) l

9. Remarks Manufacturers Data Reports are traceable by PECO Work Order packsoe Applicable Manufactumrs Data Reports to be attached Inlet fittino and trigger body were constructed in accordance with ASME 111.1977 edition with Summer 1977 addenda D

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the l ASME Code,Section XI. repair or reptamment  !

Type Code Symbol Stamp NA Certificate of Authormation No. NA Expiration Date NA Signed b . J H Kramer . Engineer Date July 15 .19 99 Svner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a vald cornmssion issued by the Natenal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by H S B 1 & I Company of Hartford. CT have spspodep the components desenbed in the Owners Report dunng the penod N//2AP9 to 7/2.3/ff . and state that to the best of my knowledge and belef, the Owner hai performed examinations and tak6n corrdttive measures described in this  !

Owners Report in accordance with the requirements of the ASME Code, Sechon XI. l

. By signing this certificate neither the inspedor nor he employer makes any warranty, expressed or impled, conceming the i examinations and corrective measures desenbod in the Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecton.

Commssions PA-24971.N & A V

inspectors Sgnature / Natonal Board State, Province, and Endorsements Date M 19 M

/

(12/82) 1 l

l l

l 1

1 l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Secton XI l I

1. Owner PECO Eneroy Company Date July 15.1999 l

Name l ,

2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address l I j

2. Plant Limenck Generatino Station Unit 2 l l

Name .

P O Box 2300. Sanatoca. PA 19464-2300 Work Order No R0664125 Address Repair Organization P.O. No., Job No. etc.

! 3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Senatoaa. PA 19464-2300 Expiration Date N/A Address l

4. Identrfcation of System Stand-by Liauld Control (System 048) Line No ECB-214 XV-048-2F004A

5. (a) Appicable Constructon Code ASME 111 19 68 Editon, N/A Addenda. N/A Code Case (b) Applicable Editon of Section XI Utilized for Repairs or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Replacement Stamped (Yes or No)

INLET CONAX 5566 5566

• 114-77023 1998 REPLACEMENT NO FITTING BUFFALO PO# 167481 TRIGGER CONAX 5569 5569

• 114-77023 1998 REPLACEMENT NO BODY BUFFALO PO# 167481 ,

I i

• 1

• Traceability per PECO Part Code Number.

7. Desenpton of Work Replaced explosive valve inlet fetina and triocer body

8. Tests conducted. Hydrostate O Pneumatic : NominalOperating Pressure u Other _ Pressure 1280 osi Test Temp. N/A *F.

NOTE: Supplemental sheets in form of lists, sketches. or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of th S form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

W/O No. R0664125 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Reports are traceable by PECO Work Order cackmae.

Apphcable Manufacturers Data Reports to be attached Inlet fittina and tricoer body were constructed in accordanw with ASME lit.1977 edition with Summer 1977 addenda e

CERTIFICATE OF COMPLIANCE We certify that the staternents made in the report are correct and this replacement conforms to the rules of the I ASME Code,Section XI. repair or replacement  !

Type Code Symbol Stamp NA Certificate of Authorizaton No. NA Expiration Date NA Signed b . - J H Kramer. Enaineer Date July 15 .19 99 pr oi Owners Desgnee, Title l -.

l CERTIFICATE OF INSERVICE INSPECTION

', the undersigned, holding a valid commssion issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsytvania and employed by H S B l & I Company of Hartford. CT . .

hav9 inspepted the components desenbed in ths Owners Report dunng the penod Wh2/ff to '7/ f f / f f . and state that to the best of my knowledge and belef, the Owner has herfofmed examinatens and tsken c6trective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

e By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and correcbve measures described in the Owners Report. Furtherrnore, neither the Inspector nor his employer shall be liable in an rnanner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

e l-7

[ Commesions PA44971N & A j Inspectors Sgnature /' Natonal Board, State, Provina, and Endorsements Date U 19 f 9 (12/S2) i

l l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS" As Required by the Provisions of the ASME Code Sechon XI l

l l 1. Owner PECO Enerav Company Date July 13.1999 l Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P O. Box 2300. Sanatoca. PA 19464-2300 __

Work Order No C0182492 l Address Repair Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Senatoca PA 19464-2300 Expiration Date N/A Address 1

1

4. Identificaten of System Reactor Core Isolation Coolina (System 049) Line No HBB-201 HV@l9-2F060

5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Summer 1971 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Rereirs or Reptemments 19 86 I

6. Identificaton of Components Repaired or Replaced and Replamment Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code l Component Manufacturer Serial No. Board No. Identificaton Replacement Stamped (Yes or No) 1/2

• NPT BONNEY LOT # 9148 N/A

• 114-94791 N/A REPLACEMENT NO PIPE PLUG FORGE PO# 165149 l

l l

l

• Traceability per PECO part code number.

7. Description of Work Replaced commercial steel osekino leako# D100 with ASME matenal

8. Tests conducted: Hydrostatic C Pneumatic D NominalOperating Pressure a Other _ Pressure 970 osi Test Temr,. N/A *F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa- J tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is j recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York., N.Y.10017 l

l l ,

i l

)

i W/O No. C0182492 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks None

. Apphcable Manufacturers Data Reports to be attached 1

• l CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this replacement conforms to the rules of the ASME Code, Secten XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorizaten No NA Expiration Date NA f

Signed I- N . N- - J H Kramer (Engineer) Date Jutv 13 ,19 99 1 C >wner or Owtiers Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commesion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsytvania and employed by H S B i & l. Comoany of HaMord. CT . havejnspegled the components desenbed in ths Owners Report dunng the penod M4/9E to 7/23/M , and state that to the best of my knowledge and belef, the Owner has pedbrmed examinatens and ta(en corfective measures desenbed in ths

. Owners Report in accordanm with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and corrective measures describsd in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with thrs

. inspecton.

Commissions PA-24971.N & A inspectors Signature / Natonal Board, State, Provinm, and Endorsements Date D 19 N (12/82) i 1

1

i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ~

As Required by the Provisions of the ASME Code Secton XI

1. Owner PECO Enerav Comoany Date July 15.1999 Nerne 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Umerick Generatina Station Unit 2 Name .

P.O Box 2300. Sanatoca PA 19464-2300 Work Order No C0183726 Address Repair Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Eneruv Company Type Code Symbol Stamp N/A Name Authorizaton No. N!A P O Box 2300. Senatoos. PA 19464-2300 Expiration Date N/A Address

4. Ident6caton of System ResidualHeat Removal (System 051) Line No DCA-204 HV-051-2F050B

5. (a) Apphcable Construction Code ASME Ill 19 74 Editon, Summer 1974 Addenda, N/A Code Case (b) Applicable Editon of Secten XI Utdized for Repairs or Replacements 19 86

6. Ident6caton of Components Repaired or Replaced and Replacenwnt Components Repaired, ASME

. Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufadurer Serial No. Board No. Identrficaten Replacement Stamped (Yes or No)

AMOOD &

VALVE S/N 2 N/A *11442791 1999 REPLACEMENT YES ORRR DISC HEAT # 91499 POW 257796

• Traceabday per PECO part code nurnber.

7. Descripton of Work Replaced disc on 12' check valve

8. Tests conducted: Hydrostatic C Pneumste C NominalOperating Pressure a Other_ Pressure 970 osi Test Temp. 200 'F.

NOTE: Supplemental sheets in form of Ists, sketches, or drawings may be used provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on the report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017

~

W/O No. C0183726 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks Manufacturers Data Reoorts are traceable by PECO work order oscksoe

. Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We mitify that the statements made in the report are correct and this roolacement conforms to the rules of tre ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certifcate of Authonzation No. NA Expiraton Date NA Signed -

J H Kramer (Encineer) Date July 15 .19 99 L8wner or Owners Designee, Tite CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commason issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B l & I Comoany of Hartford. CT _

havejnspeped the components desenbed in thrs Owners Report dunng the penod /7/C#/9L5 8 to 7/27/99 , and state that to the best of my knowledge and belief, the Owner hasterfonhed examinatens and tsKen cdhed;ve measures described in this

• Owners Report in accordana with the requirements of the ASME Code,Section XI.

By signing this certifcate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the examinatens and corrective rnessures described in ths Owners Report. Furthermore, neither the inspector nor his employer shall be leble in any manner for any personal injury or property damage of a loss of any kind ansing from or connected with this

. inspection.

Commssons PA-2497 f N & A inspectors Signatur[ Natonal Board, State. Province, and Endorsements Date 7 M 19N

/

(12/62) l I

l i

j

\

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS-As Required by the Provisions of the ASME Code Secten XI

1. Owner PECO Enemy ComDany Date Juiv 15.1999 Name 2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant timenck Generatina Station Unit 2 Name .

P O Bor 2300. Senatoaa. PA 19464-2300 Work Order No C0183752 Address Repair Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Enemy Company Type Code Symbol Stamp N/A Name Authonzaten No. N/A P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address

4. Identification of System Residual Heat Removal (System 051) Line No GBB-207 HV-0512F024A

5. (a) Applicable Construction Code ASME 111 19 71 Editon, Summer 1971 Addenda, 1516 Code Case (b) Apphcable Editon of Secten XI Utilized for Repairs or Repta ments 19 86

6. Identtheaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Ma.'.ufacturer National Otner Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identifcaton Replacement Stamped (Yes or No)

CAPITOL N'A REPLACEMENT NO 1/2

• NPT HEAT CODE N/A *114-94791 MANUFACTURING PO# 237275 PIPE PLUG 085K'

• Traceability per PECO part code number.

7. Dev>ipton of Work ReDiaced commercial steel packino leakoff plvo with ASME material

8. Tests conducted: Hydrostate C Pneumatic C Nominal Operating Pressure e Other . Pressure 250 osi Test Temp. N/A *F.

NOTE: Supplemental sheets in form of lists, sketches,0; drawings may be used, provided (1) Size B 1/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numhered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017

W/O No. C0183752 Sheet 2 of 2 FORM NIS-2 (SACK)

9. Remarks None.

. Appicable Manufacturers Data Reports to be attached

+

CERTIFICATE OF COMPLIANCE We artify that the statements made in the report are correct and this redia ment conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA j Certificate of Authonzaton No. NA Expiraton Date NA Sgned b b. - J H Kramer (Encineer) Date July 15 .19 99 J 4Bwner or Owners Desgnee, Title 1 I

l CERTIFICATE OF lNSERVICE INSPECTION  !

l I, the undersigned, holding a valid commasion issued by the National Board of Boiler and Pressure Vessel inspectors and the State 1

- or Province of Pennsvivania and employed by H S B l & I Company of l Hartford. CT -

have s the components oesenbod in this Owners Report dunng the penod 4h2/f9 to 7 99 . snd state that to the best of my knowledge and belief, the Owner his pobrmed examinatons and tak6n cos(ective measures described in this e Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conwming the j examinations and conective measures described in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind ansing from or conneded wrth this

. inspecbon.

Commissions PA-24971.N & A

" ~

Inspectors Sgnature [ ' Natonal Board, State, Province, and Endorsements Date & 19 $ V (12/82)

i I

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ,

As Required by the Prov4 ions of the ASME Code Sedion XI l

1. Owner PECO Energy Company Date July 15.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant t.imenck Generatra Station Unn 2 Narne ,

P O Box 2300. Sanatona. PA 19464-2300 Work Order No R0775260 Aodress Repair Organeation P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzaten No. N/A P O Box 2300. Sanatoos PA 19464-2300 Expirabon Date N/A Address

4. Identificaton of System Residual Heat Removal (System 051) 1.ine No DCA 418 051-2F065C

5. (a) Applicabe Constructen Code ASME lit 19 71 Edlhon, Winter 1972 Addenda. N/A Code Case (b) Applicable Editon of Section XI Utilmed for Repairs or Replacernents 19 86

6. Identificaton of Components Repaired or Replawd and Repiamment Components Repaired, ASME Name of Narne of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identificaton Replacement Stamped (Yes or No) 1/2

• NPT A10Y HEAT CODE N/A

• 114-00641 N/A REPLACEMENT NO PIPE PLUG

^' 'JCE' PO# 169201 ROO T

• Tracestnity per PECO part code number.

7. Desenption of Work Replaced comrrercial steel packing leekoff pluo with ASME ma.enal and seal welded

8. Tests conducted: Hydrostate D Pneumabc C NominalOperating P; essure a Other ,,, Pressure 970 psi Test Temp. 200 *F. l 1

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on the report is included on each sheet, and (3) each sheet is numbered and the number of sheets is i recorded at the top of ths form.

l (12/B2) This Form (E00030) may be obtained from the Order Dept., ASME,345 E A7th St., New York, N.Y.10017 i

W/O No. R0775250 Sheet 2 of 2 FORM NIS-2 (BACK)

, g. Remarks None Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this roolacement conforms to the rules of the ASME Code, Secten XI. repair or reptemment Type Code Symbol Stamp, NA Certifcate of Attthorstaten No. NA Expiration Date NA Signed . - - J H. Kramet (E e*G Date Juhr 15 .19 99 Mwner or Owners Designee, Title

)

l l

CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commasion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B l & I Company of ;

Hartford. CT . 'havejnspegted the components desenbed in this Owners Report dunng the penod 4//2/fT to 7/2_3/99 . and state that

, to the best of my knowledge and belief, the Ownsf has performed examinatons and ta(en corfectrve measures described in this Owners Report in accordance with the seguirements of the ASME Code,Section XI.

By signing this certrheate nether the inspector nor his employer makes any warranty, expressed or impled, conceming the examinations and conective measures dA~1 bed in this Owners Report. Furthermore, neither the Inspedor nor his employer shall be leble in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

• Commasions PA-24g7 f.N & A inspectors Signature [ Natonal Board, State, Province, and Endorsements Date 7/23 ,o f 9

/

(12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I As Required by the Provesons of the ASME Code Section XI )

1. Owner PECO Enoray Company Date July 15.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limonck Generahna Station Unit 2 Name .

P O Box 2300. Saratoaa. PA 19464-2300 Work Order No R0777241 Address Repair Organization P.O. No., Job No. etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzaten No. WA P O Box 2300. Senatoon. PA 19464-2300 Expiraten Date N'A Address

4. Identficaton of System. ResidualHeat Removal (System 051) Q4 No. DCA-205 051-2F077

5. (a) Appicable Constructen Code ASME Ill 19 71 Edition, Summer 1971 Addenda, 1516 Code Case (b) Appleable Editon of Sechon XI Utilized for Repairs or Replacements 19 86

6. Identricaten of Components Repaired or Replaced and Replacement Components Repaired. ASME Name of Name of Manufacturer Natonal Other Year Built Replamd, or Code Component Manufacturer SenalNo. Board No. Identflicaten Replacement Stamped (Yes or No)

COLON R N/A

• 114-79169 N/A REPLACEMENT NO 1/2 ' NPT HEAT CODE MACHINE POW 166884 PIF'E PLUG .CHY'

• Traceabilty per PECO part code number.

7. Desenpton of Work pew w.-..G steel pedina leakoff plua with ASME material and seat welded

8. Tests conducted: Hydrostate C Pneumate O Nominal Operating Pressure a Other. Pressure 970 osi Test Temp. 200 'F, NOTE: Supplemental sheets in form of lots, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on the report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 l

l

?'

l l

W/O No. R0777241 l Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks None. j

. Appleable Manufacturers Data Reports to be attached e

1 l

CERTIFICATE OF COMPLlANCE We certify that the statements rnade in the report are correct and this roolacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certifcate of Authorizaten No. NA Expiration Date NA Sened b M. b- J H. Kramer (E4.wo Date Jutv 15 .19 99 LDwner or Owners Desgnee, Ttie CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commisson issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvania and employed by H S B l & 1 Comoany of Hartford. CT . . have ipspeqed the components desenbed in this Owners Report dunng the penod 4//2/99 to 7/73/95> . and state that to the best of my knowledge and belief, the Owner had ped 6rmed examinatens and takin con 6ctive measures described in this

. Owner's Report in accordance wth the requirements of the ASME Code, Secten XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or impled, conceming the j examinatens and corrective measures described in this Owners Report. Furthermore, neither the inspector nor his employer  !

shall be liable in any manner for any personal tr$ury or property damage or a loss of any kind arising from or connected with this

. inspection.

1 Commissions PA-24971.N & A Natonsi Board, State, Province, and Endorsements Inspectors Sgnature[

Date l!131999

/

(12/82) l 1

1 i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

• As Required by the Provisions of the ASME Code Section XI

1. Owner PECO Eneroy Company Date July 15 1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Lamenck Generatino Staten _ Unit 2 Name ,

P O Box 2300 Sanatoca. PA 19464-2300 Work Order No R0772368 Address Repair Organgation P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N 'A Name Authorzaten No. N/A P O Box 23001 Sanatoca, PA 19464-2300 Expiraton Date _ N/A Address

4. Identificaton of System Core Spray (System 052) Line No DLA-210 HV-052-208

5. (a) Applicable Constructon Code ASME fil 19 71 Edition, Summer 1971 Addenda, 1516 Code Case (b) Apphcable Edition of Section XI Utilmed for Repairs or Replacements 19 86 6 Identification of Componetis Repaired or Replaced tnd Repta ment Components Repaired. ASME Name of Name of Manufacturer Natronal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificaton Replacement Stamped (Yes or No) 3/4

• NPT HEAT CODE N/A *114-83343 N/A REPLACEMENT NO NUCLEAR PIPE PLUG 'WYNA' PO# 168566

• Traceability per PECO part code number.

7, Desenption of Work Replaced comrnercial steel packino leakoff oluo with ASME matenal and seal welded 8 Tests conducted. Hydrostatic c Pneumatic O Nominal Operating Pressure a Other . Pressure 970 osi Test Temp. 200 *F.

NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in x 11 in., (2) informa-tion in items 1 through 6 on this report 6s included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME. 345 E.47th St., New York N Y.10017 l

l l

l

r W/O No. R0772368 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks None

. Appiscable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this roolacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authonzaten No. It'A Expiration Date NA Signed 1- N.b (6wner or Owners Desgnee, Tme J H Kramer (Encineer) Date JuN 15 .19 99 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, n~ olding a vahd commason issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed by H S B 1 & I Company of Hartford. CT . have pspecjoo the cornponents desenbod j in this Owners Report dunn2 the penod -@h2/f7 to 7/E /f9' . and state that i to the best of my knowledge and belief, the Owner hafperfafmed exarninetens and taWren corfective measures described in this

. Owners Report in socordance with the requirements of the ASME Code, Sedon XI.

By signing this wrtificate neither the inspector nor his employer makes any warranty, expgssed or implied, conceming the examinatens and correctwo measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be hable in any manner for any personal injury tw property damage or a loss of any kind ansing trom or connected with this j

. inspecton.

/ Commissions PA-2497 f.N & A inspedors Sgnature / Natonal Board, State, Province, and Endorsements Date 7/2_919#

/ I (12/82) i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner PECO Energy Company Date July 15.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatino Station Unit 2 Name .

P O Bor 2300. Senatoon. PA 19464-2300 Work Order No R0776144 Address Repair Organcaton P.O. No., Job No, etc.

3. Work Pedormed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorzation No. N/A P O. Box 2300 Sanatona. PA 19464-2300 Expiration Date N/A Address

4. Identificaten of System Core Sorav (System 052) Line No DCA-419 052-?F007B

5. (a) Applicable Construction Code ASME lit 19 71 Edition, Winter 1972 Addenda, N/A Code Case (b) Appicable Edition of Secten XI Utihzed for Repairs or Replacements 19 86

6. Identrfication of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufadurer Natenal Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identification Replacement Stamped (Yes or No) 1/2

• NPT CM N HEAT CODE N/A

• 114-79169 N/A REPLACEMENT NO "I"

PIPE PLUG 'CHY' POW 166884

• Traceabihty per PECO part code number.

7. Descripton of Work Replaced commercial steel osckino leakoff oluo with ASME material and seal welded

8. Tests conducted: Hydrostate O Pneumatic D NominalOperating Pressure a i Other , Pressure 970 psi Test Temp. 200 *F.

NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in.. (2) informa-ton in items 1 through 6 on the report is included on eacn sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

l l

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017 '

I l

W/O No. R0776144 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks None

, Appicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code Secten XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b k- -

@wner or Qwners Designee. Title J H. Kramer (Encineer) Date Jutv 15 .19 99 CERTIFICATE OF INSERVICE INSPECTION 1, the undersgned, holding a valid commission issued by the Natonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsytvania and employed by H S B I & I Company of Hartford. CT . .

have irjspec19d the components desenbed in this Owners Report dunng the penod N//2/M to 7/R /79 . and state that to the best of my knowledge and belef, the Owner his perf6rmed examinatens and taktIn con 6ctive measures described in this

, Owners Report in accordance with the requirements of the ASME Code, Secton XI.

By signing this certificate neither the inspector nor his employer rnakes any warranty, expressed or impled, contaming the examinatons and correct've measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manne any personalinjury or property damage or a loss of any kind ansing from or connected with this

, inspection.

Commesions PA-24971.N 8 A inspectors Sgnature f Natonal Board, State, Province, and Endorsements Date 7/23to99 (12/82) l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Section XI

1. Owner PECO Enerav Company Date Jutv 15.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet 1 of 2 Address

2. Plant Limenck Generatina Station Unit 2 Name .

P O Box 2300. Sanatoos. PA 19464-2300 Work Order No. R0776731 Address Repair Organcaton P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authonzaton No. N/A P O. Box 2300. Sanatoaa PA 19464-2300 Expiration Date N/A Address

4. Ident6caten of System Core Spray (System 052) Line No DCA420 OS2-2F007A

5. (a) Applicable Construction Code ASME til 19 71 Edition. Winter 1972 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilmed for Repairs or Replamments 19 86

6. Identificaten of Components Repaired or Replaced and Replacement Components Repaired. ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identihcotion Replacement Stamped (Yes or No)

ALLOY N/A REPLACEMENT NO 1/2

• NPT HEAT CODE N/A

• 114-00641 PIPE PLUG ST " JCE' PO# 169201 pR D S i

l

• Tramability per PECO part mde number.

7. Desenpton of Work Replaced commercial steel osckina leakoff olua with ASME material and seal welded

8. Tests conducted: Hydrostate C Pneumate C NominalOperating Pressure a Other _ Pressure 970 psi Test Temp. 200 *F.

NOTE: Supplemental sheets in form of Ists, sketches, or crawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of ths form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017

W/O No. R0776731 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks None

. Applicable Manufacturers Data Reports to be attached 1

CERTIFICATE OF COMPLIANCE We certdy that the statements rnade in the report are correct and this reotacement conforms to the rules of the ASME Code, Secten XI. repair or replacement Type Code Symbol Stamp NA Certtficate of Authonzaton No. NA Expiration Date NA Signed b h. -

J H Kramer (Enaineer) Date July 15 .19 99 C$fner or Owners Desgnee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersiDned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B.I & I Company of Hartford. CT _ _

have' the components desenbed in this Owners Report dunng the penod 4//2/99 to 7 7T ff . and state that to the best of rny knowledge and belef, the C>vner hasiperfdimed examinstons and take6 Cor@rve rnessures described in this

. Owners Report in accordance with the requirements of the ASME Code, Secten XI.

By signing this certdicate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corredive measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personalinjury or property damage or a loss of any kind arising from or connected witn this

, inspeden.

Commissions PA-2497 f.N & A inspectors Sgnature

[ Nat;onal Board, State, Province, and Endorsements Date M 1999 (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Secten XI

1. Owner PECO Eneroy Company Date July 15.1999 Name 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 Address

2. Plant Limonck Generatino Staten Unit 2 Name .

P O Box 2300. Sanatoca PA 19464-2300 Work Order No C0181992 Address Repar Organization P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorization No. N/A P O Box 2300. Sanatoaa PA 19464-2300 Expiraton Date N/A Address

4. Identifcation of System Hoh Pressure Coolant insecton (System 055) Line No HBB-208 HV-055-2F072

5. (a) Applicable Constructen Code ASME til 19 71 Edition, Summer 1971 Addenda. N/A Code Case.

(b) Appicable Editon of Secten XI Utskred for Repers or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replacement Corrponents Repaired, ASME Name of Name of Manufacturer Natenal Otner Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identificaton Replacement Stamped (Yes or No) 1/2

• NPT HEAT CODE N/A *114-79168 N/A REPLACEMENT NO NUCLEAR PIPE PLUG 615XNB' POW 160553

• Traceabilty per PECO part code number.

7. Desenpton of Work Replaced w.. .. w Steel packino leakoff pluo with ASME matenal

8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure e Other. Pressure 970 osi Test Temp. N/A *F.

NOTE: Supplemental sheets in form of hsts, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets a recorded at the top of the form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N.Y.10017

W/O No. C0181992 Sheet 2 of 2 FORM NIS-2 (BACK)

. 9. Remarks None Apphcable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corred and this roolacement conforms to the rules of the ASME Code. Sedion XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorizabon No. NA Expiration Date NA Sgned b- N. -

J H Kramer Incineer) Date July 15 .19 99 Uwner or ~ Owners Desgnee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commasion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsylvania and employed by H S B l & l. Comoany of Hartford. CT have papected the cornponents desenbed in this Owners Report dunng tne penod _</19/FM to 7/1.3/99 , and state that to the best of my knowledge and belief, the Owner has berforfned examinations and taksn corfedsve measures desenbed in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certthcate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspector nor his employer

. shall be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspechon.

Commissions PA-24971.N & A inspectors Sqnature [ National Board, State. Province, and Endorsements Date

/

M 1999 (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Secten XI

1. Owner PECO Eneroy Company Date JuN 15.1999 Name 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address

2. Plant timenck Generatino Station Unit 2 Name ,

P O Box 2300. Sanatoca. PA 19464-2300 Work Order No C0181716 Address Repair Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authormaton No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiraton Date N/A Address

4. Identtheaton of System Hioh Pressure Coolant insecton (System 055) Line No HBB-244 HV-055-2F093

5. (a) Applicable Construction Code ASME Ill 19 71 Editon, Summer 1971 Addenda, 1516.1567 and 1622 Code Case.

(b) Applicable Edition of Secten XI Utilmed for Repairs or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identificaten Repta ment Stamped (Yes or No) 1/2

• NPT COLON A N/A N/A REPLACEMENT NO HEAT CODE

• 114-00618 HINE PIPE PLUG .CHY' PO# 166557

• Traceabdity per PECO part code number.

7. Desenpton of Work Replaced commercial steel packino leakoff pluo with ASME rnaterial

8. Tests conducted: Hydrostatic C Pneumatic : NominalOperating Pressure a Other _ Pressure 970 psi Test Temp. N/A 'F.

NOTE: Supplemental sheets in form of Ists, sketches or drawings may be used, provided (1) size 81/2 in x 11 in., (2) informa-ton in items 1 through 6 on ths report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) The Form (E00030) may be obtained from the Order Dept ASME,345 E.47th St., New York, N.Y.10017

W/O No. C0181716 Sheet 2 of 2 FORM NIS-2 (BACK)

. 9. Remarks None Appicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE We rtify that the statements made in the report are corred and the replacement conforms to the rules of the ASME Code, Sechon XI. repair or reptamment Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Sened 16AunerN_b-or Owners Dessnee, Tatie J H Kramer (Engineer) Date July 15 .19 99 CERTIFICATE OF INSERVICE INSPECTION 1, the undersened, hokhng a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsv)vania and employed by H S B I & 1 Company of Hartford. CT . i hav9 insppcted the components described in this Owners Report dunng the penod 6/4f/WB to 7/1.3/P'f . and state that

,, to the best of my knowledge and belief, the Owner fias tierformed examinations and taken c6rrective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sechon XL By signing this artificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinsbons and corrective measures desenbod in this Owners Report Furthermore, neither the Inspector nor his employer

, shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

^

Commssions PA-2497 i N & A inspectors Sqnature / Natonal Board, State, Proven , and Endorsements Date , 2 8 19 W (12/82)

I ..

1 l

\

l FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisens of the ASME Code Sechon XI

1. Owner PECO Enerav Company Date Jutv 15.1999 Name 2301 Market Street. Philadelphia PA 19101 Sheet 1 of 2 Address

2. Plant Limerick Generatina Station Unit 2 Name .

P O Box 2300. Sanatoaa PA 19464-2300 Work Order No R0532792 j Address Repar Organizaten P.O. No., Job No. etc.

l .

3. Work Performed by PECO Enerny company Type Code Symbol Stamp N/A Name Authonzation No. N/A P O Box 2300. Sanatoaa PA 19464-2300 Expiraton Date N/A Address

4. Identificaten of System Hoh Pressure Coolant insection (System 055) Line No EBB-229 055-2F077 & 055-2F078 i l 5. (a) Applicable Construction Code ASME 111 19 74 Edition, Winter 1974 Addenda, N-416-1 Code Case I (b) Appicable Edition of Sechon XI Utilized for Repairs or Repiamments 19 86

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Rep!amd, or Code Component Manufacturer Serial No. Board No. IdentrTeation Replacement Stamped l

l 055-2F077 EDWARD 63 AGC N/A

• 114-98110 1994 REPLACEMENT YES 2" VALVE VALVES PO# 350394 1

l 055-2F078 EDWARD 64 AGC N/A

• 114-98110 1994 REPLACEMENT YES l

2" VALVE VALVES PO# 350394 EBB-229-Ei 2" PIPE U.S. STEEL HEAT # N/A

• 114-90039 N/A REPLACEMENT NO I PIECE #4,5 & 6 N88459 PO# 697296 1

1 EBB-229-E1 2" ELBOW BONNEY LOT # N/A

• 114-77791 N/A REPLACEMENT NO PIECE # 7 FORGE 77791 POW 169202

• Traceability per PECO Part Code Number.

7. Descripton of Work Replaced 2" ched valves and adjacent pipe

8. Tests conducted. Hydrostate C Pneumate O Nominal Operating Pressure u Other,, Pressure 1100 osi Test Temp. N/A 'F.

NOTE: Supplemental sheets in form of lists, sketches, or drawin9s may be used, provided (1) size 81/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017 l

L

W/O No. R0532792 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks Valves manufactured to ASME til.1974 eddion. Summer 1975 addenda Apphcable Manufacturer's Data Reports to be attached e

Manufacturers Data Reports are tramable by PECO Work Order packsoe

, Valve replacement completed in accordance with PECO Enaineenna Chance Reauest 98-01717 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repar or replamrnent Type Code Symbol Stamp NA Certificate of Authonzation No. NA Expiration Date NA Signed b h. - -- J H. Kramer . Er. swr Date Jutv 15 .19 99

@wner or Owners Desgnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivania and employed by H S B I & I Company of Hartford. CT have inspedqd the components desenbed in ths Owners Report dunng the penod 4/#2/99 to //23/99 . and state that to the best of my knowledge and belief, the Owner hasiperfdfrmed examuistons and take6 corre6tsve measures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI.

. By signing this artificate norther the inspector nor his employer makes any warranty, expressed or implied, concoming the examinations and corrective measures desenbed in this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

e Commesions PA-24971.N & A Inspectors Sgnature / National Board, State, Province, and Endorsements Date M 1999

/

(12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS j As Required by the Provisions of the ASME Code Secton XI i

1. Owner PECO Eneroy Company Date July 16.1998 Name 2301 Market Street. Philadelphia. PA 19101 Sheet i of 2 Addreas

2. Plant Limonck Generstmo Station Unit 2 Name .

P O Box 2300, Sanatoaa. PA 19464-2300 Work Order No R0780127 i

Address Repair Organizaten P.O. No., Job No. etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzaten No. N/A P O Box 2300 Senatoos. PA 19464-2300 Expiraton Date N/A Address

4. Identificaton of System Hiah Pressure Coolant iniecten (System 055) Line No EBB-229 & HBB-270 055-2048 & 055-2049

5. (a) Appleable Constructon Code ASME Ill 19 74 Edibon, Winter 1974 Addenda, N-416-1 Code Case (b) Appicable Editon of Section XI Utilized for Repairs or Replacements 19 86

6. Identificaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer SenalNo. Board No. Identification Replacement Stamped (Yes or No) 055-2048 EDWARD 09 AKJ N'A

• 114-98110 1998 REPLACEMENT YES 1 1/2" VALVE VALVES PO#257797 055-2049 EDWARD 80 AMP N/A

• 114-98110 1998 REPLACEMENT YES 1-1/2" VALVE VALVES POW 257797 EBB-229-E21 1-1/2" PIPE QUANEX HEAT # N/A

• 114-90038 N/A REPLACEMENT NO PIECE # 7 & 18 458574 POW 155456 HBB-270-E21 1 1/2" PIPE OUANEX HEAT # N/A

• 114-90038 N/A REPLACEMENT NO PIECE # 5 458574 PO# 155456 e

• Tramabilty per PECO Part Code Number.

7. Description of Work PMW 1-1/2" check vanes and adiamnt pipe

8. Tests conducted: Hydrostate C Pneumatic 0 NominalOperating Pressure e Other. Pressure 1110 psi Test Temp. N/A *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items i through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this fomt (12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

W/O No. R0780127 Sheet 2 of 2 FORM NIS-2 (BACK)

9. Remarks Valves manufadured to ASME til.1974 edition. Summer 1975 addenda Appicable Manufacturers Data Reports to be attached

~

Manufacturers Data Reports are traceable by PECO Work Order packene Valve replacement completed in accordance with PECO Enaineerina Chance Reauest 93-03395 CERTIFICATE OF COMPLIANCE We cert #y that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repar or reptamment Type Code Symbol Stamp NA Certtheate of Authorization No. NA Expiration Date NA Signed b -

J H Kramer . Enaineer Date July 16 .19 99 neTor Owners Desagnee, Tale CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the Nabonal Board of Boiler and Pressure Vessel Inspectors and the State or Provinz of Pennsylvania and employed by H S B f.& l. Company of Hartford. CT .

have utspegted the components descnbed in ths Owners Report dunng the penod //r/99 to E//2/99 . and state that to the best of my knowledge and belief, the Owner has perfofm#d examwiahons and tak6n co6ective measures desenbed in this Owners Report in acmrdance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, nether the inspector nor his employer o shall be liable in any manner for any personal iriury or property damage or a loss of any kind arising from or connected wth this inspection.

, Commissions PA-2497 f.N & A inspectors Segnature / Natsonal Board, State. Province, and Endorsements Date /E 19 9'7 (12/82)

r FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner PECO Eneroy Company Date July 15.1999 Name 2301 Market Street Philadelphia. PA 19101 Sheet 1 of 2 Mm

2. Plant Limerick Generatina Station Unit 2 f Name ,

P.O. Box 2300. Sanatoaa. PA 19464-2300 Work Order No. C0183612 Address Repair Organizaton P.O. No., Job No. etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A Name Authonzaten No. N/A P O. Box 2300. Sanatoca, PA 19464-2300 Expiration Date N/A Address

4. Identification of System Liouid Radwaste (System 061) Line No HBC-215 HV-061-231

5. (a) Apphcable Constructen Code ASME 111 19 71 Edition, Summer 1971 Addenda, 1516.1567 and 1622 Code Case.

(b) Appleable Edition of Secten XI Utilized for Repairs or Replamments 19 86

6. Identificaton of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identificaten Repia ment Stamped (Yes or No)

" N/A REPLACEMENT NO (2) BONNET HEAT # N/A

• 11444911 NG 3RCO293 PO# 221812 NUTS f

• Traceabihty per PECO part code number.

7, Desenpton of Work Replamd two (2) bonnet nuts on 4' cate valve

8. Tests conducted: Hydrostatic 0 Pneumatic 0 NominalOperating Pressure a Other 71 canon tank volume Pressure N/A psi Test Temp. N/A 'F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size B 1/2 in. x 11 in., (2) informa-ton in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

W/O No. C0183612 Sheet 2 of 2 l

l FORM NIS-2 (BACK) l

, 9. Remarks None Apphcable Manufacturers Data Reports to be attached a

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reDlacement Conforms to the rules of the ASME Code, Sedion XI. repair or replacement Type Code Symbol Stamp blA Certificate of Authorization No. NA Expiration Date NA Signed b b. -

($wner or Owners Designee. Title J H Kramer (Encineer) Date Jutv 15 .19 99 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commssion issued by the National Board of Boiler and Pressure Vesselinspectors and the State or Province of Pennsylvania and ernployed by H S B 1 & 1 Comosnv of Hartford. CT have inspected the components desenbed in this Owners Report dunng the penod A -//- f f to #23/F9 . and state that 4 to the best of my knowledge and belief, the Owner has performed exarrunatens and take6 corrective measures desenbed in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this artificate neither the inspedor nor his employer makes any warranty, expressed or irnplied, conceming the examinatens and corredive measures desenbed in this Owners Report. Furthermore, neither the inspector nor hrs employer  !

, shall be liable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspection.

Commissions PA-24971.N & A Inspedors Signature / National Board, State. Province, and Endorsements Date .2 3 1999 (12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provsions of the ASME Code Section XI

1. Owner PECO Eneroy Cornoany Date July 12.1999 Name 2301 Market Street. Philadelphia, PA 19101 Sheet i of 3 Address

2. Plant Limerick Generatina Staten Unit 2 Name ,

P O Box 2300. Sanatoca. PA 19464-2300 Action Reauest No A1162416 Address Repair Organization P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Author 2ation No. N/A P O Box 2300. Sanatoaa. PA 19464-2300 Expiration Date N/A Address i

4. Identsfication of System Snubbers (System 103 ) Line No Vanous. See Name of Component

5. (a) Applicable Construden Code ANSI B317 19 69 Edition, March 10,1971 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identification Reptaoement Stamped (Yes or No)

DBA 207-H012 PACIFIC 24646 N/A PSA-3 N/A REPLACEMENT YES SCIENTIFIC SNUBBER PSA-3 DBA-207-H017 PACIFIC 21079 N/A N/A REPLACEMENT YES SCIENTIFIC S BBER PSA-1 DCA-201 PACIFIC 25031 N/A N/A REPLACEMENT YES SNUBBER H065(B) SCIENTIFIC PSA-10 DCA-201-H068 PACIFIC 17500 N/A N/A REPLACEMENT YES S BR SCIENTIFIC PSA-3 YES DCA 201-H070 PACIFIC 13232 N/A N/A REPLACEMENT SNUBBER ,

SCIENTIFIC N/A SA40 N/A REPLACEMENT YES DCA-201-H071 PACIFIC 17467 S BBER SCIENTIFIC PSA-35 YES

• DCA-204-H015 PACIFIC 9040 N/A N/A REPLACEMENT SCIENTIFIC S BBER

7. Desenpton of Work Replaced rnechanical shock arrester snubbers and hanger hardware

8. Tests conducted: Hydrostate C Pneumate C NominalOperating Pressure :

Other. Pressure N/A osi Test Temp. N/A 'F.

NOTE: Supplemental sheets in form of Ists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in iterns 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of ths form.

(12/82) The Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N Y.10017 l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisons of the ASME Code Seebon XI

1. Owner PECO Eneroy Company Date JuN 12,1999 Name 2301 Market Street, Philadelphia. PA 19101 Sheet 2 of 3 Address

2. Plant Limenck Generatino Station Unit 2

• Name P O. Box 2300. Sanatoca. PA 19464-2300 Achon Recuest No A1162416 Address Repair Organnaten P.O. No., Job No. etc.

3. Work Performed by PECO Eneroy Company Type Code Symbol Stamp N/A Name Authorizaton No. N/A P O Box 2300. Sanatoca, PA 19464-2300 Expiraton Date N/A Address 1

4. Identification of System Snubbers (System 103 ) Line No Vanous, See Name of Component

5. (a) Applicable Construction Code ANSI B31.7 19 69 Edibon, March 10.1971 Addenda, N/A Code Case (b) Appicable Edition of Secten XI Utilmed for Repairs or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replamment Components Repaired. ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identificaten Reptazment Stamped (Yes or No)

EBB-201-H022 PACIFIC 1554 N/A PSA-100 N/A REPLACEMENT YES SCIENTIFIC SNUBBER M4-928M N/A REPLACEMENT NO EBB-201-H022 EERGEN. N/A N/A 354630 LOAD PIN PATTERSON PSA-1 EBB-209.H020 PACIFIC 1913 N/A N/A REPLACEMENT YES SNUBBER SCIENTIFIC EBB-209-H041 PACIFIC 40337 N/A N/A REPLACEMENT NO SNU R SCIENTIFIC PO# 164240

• PSA-10 REPLACEMENT YES EBB-231- PACIFIC 17397 N/A N/A SNUBBER H003(A) SCIENTIFIC PSA-10 YES GBB-205-H025 PACIFIC 17386 N/A N/A REPLACEMENT I' SNUBBER

. SCIENTIFIC GBB-218-H030 PACIFIC 17493 N/A N/A REPLACEMENT YES S R SCIENTIFIC HBB-201-H028 PACIFIC 3142 N/A N/A REPLACEMENT YES SN ER SCIENTIFIC PSA 10 N/A REPLACEMENT YES HBB-218-H082 PACIFIC 7664 N/A SNUBBER SCIENTIFIC

I

~

NR No. A1162416 Sheet 3 of 3 FORM NIS-2 (BACK) ,

9. Remarks Snubbers are manufacturered to ASME III.1977 edition with winter 1977 addenda Apphcable Manufacturers Data Reports to be attached

• Traceability per PECO Part Code number.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed b N.b-- J H Kramer. Enaineer Date July 12. .19 99 C$mer 6r Owners Desagnee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvtvania and employed try H S B 1 & 1 Company of ,

Hartford. CT have inspected the components desenbed in this Owners Report dunng the penod /5 od.T YM to /R AM 99 . and state that to the best of my knowledge and belief, the Owner has performed examinatsons and taken corrective rneasures desenbed in this Owners Report in accordance with the requirements of the ASME Code, Sechon XI. ,

By signing this certificate neither the inspedor nor his employer makes any warranty, expressed or impled, concoming the examinations and corrective measures desenbod in this Owners Report. Furthermore, neither the inspedor nor his employer shall be liable in any manner foi any personal injury or property damage or a loss of any kind ansing from or connected with this inspecbon.

Commissions PA-2497 l.N & A inspectors Segnature National Board, State Province, and Endorsements Date 8//91999

/

(12/82)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

~

As Required by the Provsions of the ASME Code Secton XI

1. Owner PECO Eneroy Company Date July 12.1999 Name 2301 Market Street, PhiladelDhia. PA 19101 Sheet 1 of 3 Address

2. Plant Limerick Generatina Station Unit 2 Name

. P O Box 2300. Sanatoaa. PA 19464-2300 Acton Request No A1162608 Address Repair Organizaton P.O. No., Job No, etc.

3. Work Performed by PECO Enerav Company Type Code Symbol Stamp N/A

. Name Authonzaton No. N/A P.O Box 2300. Sanatoaa PA 19464 2300 Expiraton Date N/A Address

4. Identificaton of System Snubbers (System 103 ) Line No Various. See Name of Component

5. (a) Appleable Constructen Code ANSI B317 19 69 Editon, March 10.1971 Addenda. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86

6. Identrfication of Components Repaired or Replaced and Replamment Components Repaired, ASME Name of Name of Manufacturer National Other Year Built Replaced, or Code Component Manufacturer Senal No. Board No. Identrlicaten Replacement Stamped DBA-207-H013 PACIFIC 17154 N/A PSA-3 N/A REPLACEMEN7 YES SCIENTIFIC SNUBBER DBA-207-H016 3 PACIFIC 21173 N/A N/A REPLACEMENT YES SCIENTIFIC S ER

~

DBA 210-E01- PACIFIC PSA-1 1899 N/A N/A REPLACEMENT YES H004 SCIENTIFIC SNUBBER DBA-210-E01 PACIFIC 19932 N/A 0^~I N/A REPLACEMENT YES H006 SCIENTIFIC SNUBBER EBB-205-E01- PACIFIC PSA-1 20152 WA WA REPLACEMENT YES

' T1 SCIENTIFIC EBB-209-H015 PACIFIC 2,875 PSA-3 N/A N/A REPLACEMENT YES SCIENTIFIC b EBB-209-H018 PACIFIC 3178 PSA-3

• N/A N/A REPLACEMENT YES SCIENTIFIC SNUBBER EBB-209-H025 PACIFIC 3030 N/A PSA-3 N/A REPLACEMENT YES

SCIENTIFIC SNUBBER EBB-209 PACIFIC 17162 3

N/A N/A REPLACEMENT YES H030(A) SCIENTIFIC SNUBBER

7. Description of Work Replaced mechanical shock arrester snubbers .

8. Tests conducted: Hydrostate O Pneumatic r.; NominalOperating Pressure C Other. Pressure N'A psi Test Temp. WA *F.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 81/2 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner PECO Enemy Company Dde JuN 12.1999 Name 2301 Market Street. Philadelphia, PA 19101 Sheet 2 of 3 Address

2. Plant Limerick Generstma Station Unit 2 .

Name P O Box 2300= Sanatoaa, PA 19464-2300 Action Reauest No A1162608 Address Repair Organization P.O. No., Job No etc. .

3. Work Performed by PECO Enemy Company Type Code Symbol Stamp .N/A Name Authorization No. N/A P O Box 2300. Sanatoca. PA 19464-2300 Expiration Date N/A Address

4. Identification of System Snubbers (System 103 ) Line No Vanous. See Name of Component

5. (a) Applicable Construction Code ANSI B317 19 69 Edition, March 10.1971 Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME Name of Name of Manufacturer Natonal Other Year Built Replaced, or Code Component Manufacturer Serial No. Board No. Identifcation Replacement Stamped 3

EBB-209- PACIFIC 11681 N/A N/A REPLACEMENT YES SCIENTIFIC S BBER H030(B)

PSA-3 EBB-229- PACIFIC 1877 N/A N/A REPLACEMENT YES SNUBBER H046(A) SCIENTIFIC PSA-3 EBB-229- PACIFIC 2308 N/A N/A REPLACEMENT YES H046(B) SCIENTIFIC S BBER PSA-1 GBB 216 PACIFIC 19877 N/A N/A REPLACEMENT YES SCIENTIFIC b 00 H051(A)

SA4 YES GBB-216- PACIFIC 19861 N/A N/A REPLACEMENT SCIENTIFIC S DBER H051(B)

^

PSA-1 GBB-216- PACIFIC 19861 N'A N/A REPLAl 2 MENT YES H051(B) SCIENTIFIC S BBER PSA-1 GBB-216- PACIFIC 1994 N/A N/A REPLACEMENT YES SCIENTIFIC S BBER .

H058tA)

PSA-1 GBB-216- PACIFIC 19949 MA MA REPLACEMENT YES SCIENTIFIC 0 00 HOSS(B)

PSA-10 HBB-208-H015 PACIFIC 2690 N/A N/A REPLACEMENT YES SNUBBER SCIENTIFIC PSA-10 YES HBB-208-H017 PACIFIC 12461 N/A N/A REPLACEMENT SCIENTIFIC S B ER PSA-1 HBB-245-H006 PACIFIC 26022 N/A MA REPLACEMENT YES l SNUBBER 1 SCIENTIFIC PSA-10 HSB-245-H008 PACIFIC 1900 N/A N/A REPLACEMENT YES b O SCIENTIFIC

A/R No. A1162608 Sheet 3 of 3 FORM NIS-2 (BACK) 4

9. Remarks Snubbers are manufacturefod to ASME fil. its77 edition with winter 1977 addenda Apphcable Manufacturers Data Reports to be attached e

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are Conect and this roolacement conforms to the rules of the ASME Code,Section XI. repar or replacement Type Code Symbol Starnp_ NA Certificate of Authorization No. NA Expiration Date NA Signed 1- k. Y_^ - -

J H Kramer. Enaineer Date Jutv 12. .19 99 Swner or Owners Desagnee, Title CERTIFICATE OF INSERVICE NSPECTION 1, the undersgned, holding a valid commt6sion issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Pennsvivania and employed by H S B I & I Company of Hartford. CT . . havp anspected the components desenbed 4 in ths owners Report dunng the penod 10 //5/98 to A//9/99 . and state that to the best of my knowledge and belief, the Owner has perfbrmedexarrunaturis and tdken dorrecuve rneasures described in this Owners Report in accordance with the requ' rements of the ASME Code, Sechon XI.

By signing this certificate neither the inspector nor his employer rnakes any warranty, expressed or implied, concoming the s examinations and correctrue measures desenbod in the Owners Report. Furthermore, neither the inspector nor his employer shaB be hable in any manner for any personal injury or property damage or a loss of any kind ansing from or connected with this inspechon.

. Commissions PA-24971.N & A inspectorsSgnature / National Board, State, Province, and Endorsements oste A//9 19 99

/

(12/82) i L. . . , . . . ..

. . . . .