Letter Sequence Other |
|---|
TAC:MD3579, Addition of LCO 3.0.8, Inoperability of Snubbers (Approved, Closed) |
|
MONTHYEARML0631303512006-11-0202 November 2006
Application for Technical Specification (TS) Change to Add LCO 3.0.8 on the Inoperability of Snubbers (and Adoption of TS Bases for LCO 3.0.8) Using the Consolidated Line Item Improvement Process (CLIIP)
Project stage: Request
ML0708711652007-05-14014 May 2007
Issuance of Amendment Adoption of Technical Specification Task Force (TSTF) Change TSTF-372, the Addition of Limiting Condition for Operation (LCO) 3.0.8 on the Inoperability of Snubbers
Project stage: Approval
ML0726101972007-09-18018 September 2007
Technical Specifications, Adoption of Technical Specification Task Force (TSTF) Change TSTF-372, the Addition of Limiting Condition for Operation (LCO) 3.0.8 on the Inoperability of Snubbers
Project stage: Other
2007-05-14
[Table View] |
|
|---|
Category:Technical Specifications
MONTHYEARML20328A2972020-12-0101 December 2020
Amendment No. 253 - Non-Safeguards Version
ML19276C4202020-01-0202 January 2020
Issuance of Amendment No. 252, Request to Remove Cyber Security Plan Requirements for the Permanently Defueled Condition
ML19235A0502019-08-27027 August 2019
Issuance of Amendment No. 249 Order Approving Direct Transfer of Renewed Facility Operating License and ISFSI General License and Conforming Amendment
ML17163A1812017-05-25025 May 2017
Supplemental to Technical Specifications Proposed Change - Administrative Controls for Permanently Defueled Condition
ML17053A4682017-02-14014 February 2017
Technical Specifications Proposed Change - Administrative Controls for Permanently Defueled Condition
ML16363A2662017-01-10010 January 2017
Correction to Amendment No. 234 Change in Technical Specification Measurement Frequency from 18 Months to 24 Months
ML16250A2232016-10-28028 October 2016
Issuance of Amendments Proposed Changes to Emergency Plan to Revise Training for the on - Shift Chemistry Technician
ML15114A0212015-05-0606 May 2015
Issuance of Amendment Regarding the Minimum Critical Power Ratio License Amendment Request
ML14272A0702015-03-12012 March 2015
Issuance of Amendment 242 Re Revision to Technical Specification 2.1, Safety Limits to Resolve Pressure Regulator Fail-Open Transient
ML14295A6852014-10-31031 October 2014
Issuance of Amendment Regarding Heavy Loads to Facilitate Dry Storage Handling Operations
ML14259A3812014-09-11011 September 2014
Supplement to Proposed License Amendment Request to Modify Technical Specification 4.3.4, Heavy Loads to Facilitate Dry Storage Handling Operations
ML13108A2172013-04-0505 April 2013
Proposed License Amendment: Revision to Technical Specification 2.1, Safety Limits to Resolve Pressure Regulator Fail-Open (PRFO) Transient Reported by General Electric Nuclear Energy in Accordance with 10 CFR 21.21(d)
CNRO-2012-00009, Entergy Responses to Request for Additional Information Regarding Changes to the Quality Assurance Program Manual & Associated Plant Technical Specifications Re Staff Qualifications2012-11-20020 November 2012
Entergy Responses to Request for Additional Information Regarding Changes to the Quality Assurance Program Manual & Associated Plant Technical Specifications Re Staff Qualifications
ML12005A1982011-12-29029 December 2011
Cycle-Specific License Amendment Request for Rod Worth Minimizer (RWM) Bypass Allowance to Allow Reactor Startup
ML0731004782007-11-0505 November 2007
Technical Specifications, Issuance of Amendment Control Rod Operability, Scram Insertion Time, and Control Rod Accumulator Requirements
ML0726101972007-09-18018 September 2007
Technical Specifications, Adoption of Technical Specification Task Force (TSTF) Change TSTF-372, the Addition of Limiting Condition for Operation (LCO) 3.0.8 on the Inoperability of Snubbers
ML0726102002007-05-17017 May 2007
Technical Specifications, Corrected Page II (Fixed Administrative Error)
ML0715605422007-04-25025 April 2007
Tech Spec Pages for Amendment 228 Single Control Rod Withdrawal Allowances
ML0714303052007-04-25025 April 2007
Technical Specifications, Limiting Conditions for Operation
ML0708603592007-03-26026 March 2007
Technical Specifications, Issuance of License Amendment 226 Adoption of Technical Specification Task Force (TSTF) Change TSTF-484 Use of TS 3.10.1 for Scram Time Testing Activities.
ML0708603392007-02-22022 February 2007
Technical Specifications, Modify the TSs to Extend the Use of the Current Pressure-Temperature Limits as Specified in TS Figures 3.6.1, 3.6.2, and 3.6.3 Through the End of Operating Cycle 18
ML0702302932007-01-15015 January 2007
Proposed Change to Applicability of Pilgrim'S Pressure - Temperature Curves as Described in Technical Specification Figures 3.6.1, 3.6.2, and 3.6.3, Revision 1
ML0631303512006-11-0202 November 2006
Application for Technical Specification (TS) Change to Add LCO 3.0.8 on the Inoperability of Snubbers (and Adoption of TS Bases for LCO 3.0.8) Using the Consolidated Line Item Improvement Process (CLIIP)
ML0626405822006-09-20020 September 2006
Tech Spec Pages for Amendment 225 Regarding Revised Reactor Coolant System Leakage Detection Instrumentation Requirements and Actions
ML0626202402006-09-14014 September 2006
Technical Specification Pages Re Relocation of Technical Specifications Structural Integrity Requirements to Final Safety Analysis Report
ML0624904892006-08-30030 August 2006
Technical Specification Amendment Request to Relocate Specifications Not Meeting the Criteria of 10 CFR 50.36(c)(2)(ii), Revision 1,
ML0622800132006-08-0909 August 2006
Tech Spec Pages for Amendment 223 Regarding Administrative Changes and Relocation of Certain Technical Specification Responsibilities
ML0622301672006-08-0404 August 2006
Tech Spec Pages for Amendment 222 Deletion of Requirement Related to NRC Approval of Engineering Evaluation for Elevated Relief Valve Discharge Pipe Temperature
ML0618704692006-06-30030 June 2006
Technical Specifications Amendment Request to Revise the Surveillance Requirements for the High Pressure Coolant Injection (HPCI) and Reactor Core Isolation Cooling (RCIC) Systems
ML0613000952006-05-0505 May 2006
Correction to Amendment No. 221 Revised Rod Worth Minimizer Bypass Allowances - Technical Specifications
ML0610702152006-04-13013 April 2006
Technical Specification Page, Deletes the Main Steam Isolation Valve Twice Per Week Partial Stroke Testing Surveillance Specified in Technical Specification 4.7.A.2.b.1.c
ML0610702042006-04-13013 April 2006
Technical Specification Page Re Revised Rod Worth Minimizer Bypass Allowances
ML0610908322006-04-12012 April 2006
Proposed License Amendment to Change Technical Specification 3.6.A.2, Pressure-Temperature Limit Curves
ML0610701672006-04-12012 April 2006
Tech Spec Pages for Amendment 219 Regarding Single Recirculation Loop Operation
ML0611402652006-04-10010 April 2006
Technical Specification Pages Re Revised Applicability for Containment Oxygen and Differential Pressure Limits
ML0524301522005-08-29029 August 2005
Technical Specification Pages Re Surveillance Frequency Improvements
ML0521400792005-07-29029 July 2005
Technical Specifications, Revised Action for Scram Discharge Volume Vent and Drain Valves
ML0515204742005-05-24024 May 2005
Technical Specifications Amendment Request to Revise Primary Containment Oxygen Concentration and Drywell-to-Suppression Chamber Differential Pressure Applicability Requirements
ML0515204582005-05-24024 May 2005
Technical Specifications Amendment Request for Rod Worth Minimizer (RWM) Bypass Allowances
ML0515204732005-05-24024 May 2005
Request for Amendment to the Technical Specifications to Delete Requirement Related to NRC Approval of Engineering Evaluation for Elevated Safety Relief Valve Discharge Pipe Temperature
ML0512200952005-04-28028 April 2005
Technical Specifications, Eliminates Secondary Containment Operability Requirements When Handling Sufficiently Decayed Irradiated Fuel or Performing Core Alterations
ML0510400322005-04-12012 April 2005
Technical Specifications, Revision to Surveillance Requirement Frequency for Containment and Suppression Pool Spray Headers and Nozzles
ML0509004102005-03-30030 March 2005
Technical Specifications, Allows One-time Extension of Appendix J Type a Integrated Leakage Rate Test Interval
ML0507601772005-03-16016 March 2005
Tech Spec Pages for Amendment No. 211, Revise Reactor Vessel Hydrostatic and Leak Testing Requirements
ML0503800052005-02-0202 February 2005
Tech Spec Page for Amendment 210 Changes to Technical Specifications Table 3.2.C-1
ML0500701552005-01-0505 January 2005
Technical Specification Pages for Amendment No. 209 to License No. DPR-35
ML0423206092004-08-17017 August 2004
Technical Specifications, Issuance of Amendment Re.: Multiple Control Rod Removal, Limiting Condition for Operation 3/4.10.D
ML0420502772004-07-22022 July 2004
Tech Spec Pages for Amendment 206 Elimination of Requirements for Hydrogen Analyzers
ML0403307902004-01-30030 January 2004
License Amendment, Tech Spec Pages
ML0332100752003-11-14014 November 2003
Revised TS Page 5.0-7, Eliminating Requirements for Post-Accident Sampling System
2020-12-01
[Table view] |
Text
B. Technical Specifications The Technical Specifications contained in Appendix A, as revised through Amendment No.229 are hereby incorporated in the license. The licensee shall operate the facility in accordance with the Technical Specifications.
C. Records ENO shall keep facility operating records in accordance with the requirements of the Technical Specifications.
D. Equalizer Valve Restriction - DELETED E. Recirculation Loop Inoperable - DELETED F. Fire Protection ENO shall implement and maintain in effect all provisions of the approved fire protection program as described in the Final Safety Analysis Report for the facility and as approved in the SER dated December 21, 1978 as supplemented subject to the following provision:
ENO may make changes to the approved fire protection program without prior approval of the Commission only ifthose changes would not adversely affect the ability to achieve and maintain safe shutdown in the event of a fire.
G. Physical Protection The licensee shall fully implement and maintain in effect all provisions of the Commission-approved physical security, training and qualification, and safeguards contingency plans including amendments made pursuant to provisions of the Miscellaneous Amendments and Search Requirements revisions to 10 CFR73.55 (51 FR27817 and 27822) and to the authority of 10 CFR 50.90 and 10 CFR 50.54(p). The combined set of plans, which contain Safeguards Information protected under 10 CFR 73.21, is entitled: "Pilgrim Nuclear Power Station Physical Security, Training and Qualification, and Safeguards Contingency Plan, Revision 0" submitted by letter dated October 13, 2004, as supplemented by letter dated May 15, 2006.
Anencdnent 229
3.0 LIMITING CONDITION FOR OPERATION (LCO) APPLICABILITY 3.0.1 Not Used 3.0.2 Not Used 3.0.3 Not Used 3.0.4 Not Used 3.0.5 Not Used 3.0.6 Not Used 3.0.7 Special Operations LCOs in Section 3.14 allow specified Technical Specifications requirements to be changed to permit performance of special tests and operations. Unless otherwise specified, all other Technical Specification requirements remain unchanged. Compliance with Special Operations LCOs is optional. When a Special Operations LCO is desired to be met but is not met, the ACTIONS of the Special Operations LCO shall be met. When a Special Operations LCO is not desired to be met, entry into a Mode or other specified condition in the Applicability shall only be made in accordance with the other applicable Specifications.
3.0.8 When one or more required snubbers are unable to perform their associated support function(s), any affected supported LCO(s) are not required to be declared not met solely for this reason if risk is assessed and managed, and:
- a. the snubbers not able to perform their associated support function(s) are associated with only one train or subsystem of a multiple train or subsystem supported system or are associated with a single train or subsystem supported system and are able to perform their associated support function within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />; or
- b. the snubbers not able to perform their associated support function(s) are associated with more than one train or subsystem of a multiple train or subsystem supported system and are able to perform their associated support function within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />.
At the end of the specified period the required snubbers must be able to perform their associated support function(s), or the affected supported system LCO(s) shall be declared not met.
Amendment 249- 2-4-, 22-9 3/4.0-1
I . a 4.0 SURVEILLANCE REQUIREMENT (SR) APPLICABILITY 4.0.1 Not Used 4.0.2 Not Used 4.0.3 If it is discovered that a Surveillance was not performed within its specified Surveillance Frequency, then compliance with the requirement to declare the LCO not met may be delayed, from the time of discovery, up to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> or up to the limit of the specified Surveillance Frequency, whichever is greater. This delay period is permitted to allow performance of the Surveillance. A risk evaluation shall be performed for any Surveillance delayed greater than 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> and the risk impact shall be managed.
If the Surveillance is not performed within the delay period, the LCO must immediately be declared not met, and the applicable Condition(s) must be entered.
When the Surveillance is performed within the delay period and the Surveillance is not met, the LCO must immediately be declared not met, and the applicable Condition(s) must be entered.
Amendment 2W2-4-l , 229 3/4.0-2 .1