ML101950493

RB-2010-04-Draft Outline Comments

ML101950493
Person / Time
Site:	River Bend
Issue date:	04/12/2010
From:	Garchow S Operations Branch IV
To:	Entergy Operations
References
50-458/10-04
Download: ML101950493 (2)

Text

Attachment 6 OBDI 202 - IOLE Process DRAFT OUTLINE COMMENTS Facility: River Bend First Exam Date:April 16, 2010 Written Exam Outline (2/19/2010) Comment Resolution 1 No comments None 2 3 4 5 Administrative JPM Outline (2/19/2010) Comment Resolution 1 Replace RO ADMIN for EP Replace RO Admin JPM A3 was replaced with a new JPM. 2 Replace SRO ADMIN A5 as it is an RO Will reword the JPM so that it is an SRO JPM This was done.

3 Make EP Determination following a scenario 4 5 Control Room / In-Plant System JPM Outline (2/19/2010) Comment Resolution 1 Replace JPM C2 as it is same as scenario 2. This was not replaced - the scenario was revised so it no longer has C2. 2 What is ARC? 3 What is safety significance of JPM C1? This is performed per an EOP attachment. 4 5 Simulator Scenario Outline Comments (2/19/2010) Comment Resolution 1 Scenario 1 -

Replace event 2 with a TS failure Event 2 has no safety significance. Will be replaced.

Attachment 6 OBDI 202 - IOLE Process This event was replaced.

2 Scenario 2 - Can LPRM be bypassed in simulator?

Remove 5 minutes from event 5.

Does event 7 include BPV's? If so, lower initial power to 70%. Will replace with a BOP TS event. Looking at inadvertent auto start of RCIC

Will remove the 5 minute delay so that it is

examiner initiated.

Based on validation, events 3 and 4 were replaced. The 5 minute time delay was removed. 3 Scenario 3 - What BOP actions for event 5? What is the operational impact of event 3? Looks like a spare 4 Scenario 4 -

What are the BOP actions on event 4? Make sure it is ok to raise power Will add another BOP event. Event 6 was added to the scenario. 5