|
---|
Category:License-Operator
MONTHYEARML23065A0702023-03-0606 March 2023 Bru 2022301 2B Exam Administrative Items IR 05000324/20213642021-06-11011 June 2021 Exam Approval Letter 05000348/2021-301 and 05000324/2021-364 ML21034A6212021-02-0303 February 2021 301 2B (Normal Release) Exam Administrative Items ML21034A6222021-02-0303 February 2021 301 2A Exam Administrative Items (2 Year Delayed Release) ML21034A6252021-02-0303 February 2021 301 2A Exam Final Items (2 Year Delayed Release) ML21015A0162021-01-15015 January 2021 301 1A Final RO Written Exam (2-Year Delayed Release) ML21015A0202021-01-15015 January 2021 301 1A Final SRO Written Exam (2-Year Delayed Release) ML21019A3932021-01-11011 January 2021 1 GFE Annual Letter for Fy 2021 ML20339A4052020-11-30030 November 2020 Operator Licensing Examination Approval 05000325/2020301 and 05000324/2020301 RA-20-0075, Response to NRC Regulatory Issue Summary 2020-01 Preparation and Scheduling of Operator Licensing Examinations2020-03-16016 March 2020 Response to NRC Regulatory Issue Summary 2020-01 Preparation and Scheduling of Operator Licensing Examinations ML20007F7572020-01-0707 January 2020 Annual Letter - Generic Fundamentals Examination (GFE) Section of the Written Operator Licensing Examination for 2020 ML19058A6322019-07-0101 July 2019 Issuance of Amendments to Revise Emergency Action Level Schemes to Incorporate Clarifications Provided by Emergency Preparedness FAQs RA-19-0237, Catawba Station, Shearon Plant, McGuire Station, Oconee Nuclear Station and H.B. Robinson Plant - Response to NRC Regulatory Issue Summary 2019-02 Preparation and Scheduling of Operator Licensing Examinations2019-05-15015 May 2019 Catawba Station, Shearon Plant, McGuire Station, Oconee Nuclear Station and H.B. Robinson Plant - Response to NRC Regulatory Issue Summary 2019-02 Preparation and Scheduling of Operator Licensing Examinations ML19115A2282019-04-25025 April 2019 Exam 2019-301, Exam Administrative Items (Normal Release) ML19018A0882019-01-17017 January 2019 Annual Letter - Generic Fundamentals Examination (GFE) Section of the Written Operator Licensing Examination for 2019 ML19004A3402019-01-0303 January 2019 Operator Licensing Examination Approval 05000325/2019301 and 05000324/2019301 ML18239A4532018-08-27027 August 2018 302 Exam Administrative Items (ADAMS-2D)- Delay Release 2 Yrs ML18239A4522018-08-27027 August 2018 302 Exam Administrative Items (ADAMS-2C)- Delay Release 2 Yrs ML18239A4482018-08-27027 August 2018 302 Exam Final Items (ADAMS-2B)- Delay Release 2 Yrs ML18239A4462018-08-27027 August 2018 302 Examination Draft Items (ADAMS-2A)- Delay Release 2 Yrs RA-18-0049, Operating Test Outline, Written Examination Outline, and Reference Materials for Licensed Operator Initial Examination 50-325/2018-301 and 50-324/2018-3012018-06-25025 June 2018 Operating Test Outline, Written Examination Outline, and Reference Materials for Licensed Operator Initial Examination 50-325/2018-301 and 50-324/2018-301 IR 05000324/20183012018-06-25025 June 2018 Operating Test Outline, Written Examination Outline, and Reference Materials for Licensed Operator Initial Examination 50-325/2018-301 and 50-324/2018-301 ML18110A3212018-04-16016 April 2018 March 2018 - Brunswick NRC Generic Fundamentals Examination Results ML18086B0442018-02-16016 February 2018 Facility Cover Letter - Rii - March 2018 - GFE BSEP 17-0121, Post-Examination Documentation and Comments for Operator Retake Initial Examination2017-12-14014 December 2017 Post-Examination Documentation and Comments for Operator Retake Initial Examination IR 05000324/20173022017-12-12012 December 2017 (Retake) Operator Licensing Examination Approval 05000325/2017302 and 05000324/2017302 ML17298B1732017-10-25025 October 2017 05000325/2017-301 and 324/2017-301 Exam Administrative Items ML17298B1312017-10-25025 October 2017 05000325/2017-301 and 05000324/2017-301 Exam Draft Items ML17298B1612017-10-25025 October 2017 05000325/2017-301 and 324/2017-301 Exam Final Items ML17263A6222017-09-20020 September 2017 Reactor Operator and Senior Reactor Operator License Post-Examination Documentation and Comments 05000325/2017301 and 05000324/2017301 Post Exam Comments ML17263A6012017-09-20020 September 2017 Final RO Written as Given and Answer Sheet - Delay Release 2 Yrs ML17263A6042017-08-0808 August 2017 Final SRO Written as Given and Answer Sheet - Delay Release 2 Yrs ML17201B5072017-07-18018 July 2017 Operator Licensing Written Examination Approval 050003252017301 and 050003242017301 ML17181A3862017-06-30030 June 2017 Exam Draft Items 2A - Delay Release ML17181A3952017-06-30030 June 2017 Exam Final Items 2B - Delay Release ML17181A4012017-06-30030 June 2017 Exam Administrative Items 2C - Delay Release ML17181A3342017-06-30030 June 2017 Brunswick 2015301 ADAMS 2D - Exam Admin Items ML17032A2792017-01-27027 January 2017 Annual Letter - Generic Fundamentals Examination (GFE) Section of the Written Operator Licensing Examination for 2017 ML17012A3042017-01-27027 January 2017 Final RO Written Exam - Delay Release 2 Yrs ML17017A3852017-01-27027 January 2017 Final SRO Written Exam - Delay Release 2 Years ML17017A3892017-01-27027 January 2017 Post-Exam Comment - Delay Release 2 Yrs ML16334A5322016-11-21021 November 2016 Operator Licensing Written Examination Approval 05000325/2016301 and 05000324/2016301 ML16007A2122016-01-0707 January 2016 Initial Exam 2015-301 Post Exam Comments BSEP 15-0105, Reactor Operator and Senior Reactor Operator License Post-Examination Documentation and Comments2015-12-21021 December 2015 Reactor Operator and Senior Reactor Operator License Post-Examination Documentation and Comments BSEP 15-0018, Updated Information Regarding Operator Licensing Examinations2015-03-0505 March 2015 Updated Information Regarding Operator Licensing Examinations ML14350A1732014-12-16016 December 2014 Initial Exam 2014-301 Final Administrative JPMs ML14350A1682014-12-16016 December 2014 Initial Exam 2014-301 Final Simulator In-Plant JPMs ML14350A1612014-12-16016 December 2014 Initial Exam 2014-301 Final Simulator Scenarios ML14350A1582014-12-16016 December 2014 Initial Exam 2014-301 Final Administrative Documents ML14350A1552014-12-16016 December 2014 Initial Exam 2014-301 Draft Administrative JPMs 2023-03-06
[Table view] Category:Part 55 Examination Related Material
MONTHYEARML23065A0702023-03-0606 March 2023 Bru 2022301 2B Exam Administrative Items IR 05000324/20213642021-06-11011 June 2021 Exam Approval Letter 05000348/2021-301 and 05000324/2021-364 ML21034A6222021-02-0303 February 2021 301 2A Exam Administrative Items (2 Year Delayed Release) ML21034A6252021-02-0303 February 2021 301 2A Exam Final Items (2 Year Delayed Release) ML21034A6212021-02-0303 February 2021 301 2B (Normal Release) Exam Administrative Items ML21015A0202021-01-15015 January 2021 301 1A Final SRO Written Exam (2-Year Delayed Release) ML21015A0162021-01-15015 January 2021 301 1A Final RO Written Exam (2-Year Delayed Release) ML21019A3932021-01-11011 January 2021 1 GFE Annual Letter for Fy 2021 ML20339A4052020-11-30030 November 2020 Operator Licensing Examination Approval 05000325/2020301 and 05000324/2020301 RA-20-0075, Response to NRC Regulatory Issue Summary 2020-01 Preparation and Scheduling of Operator Licensing Examinations2020-03-16016 March 2020 Response to NRC Regulatory Issue Summary 2020-01 Preparation and Scheduling of Operator Licensing Examinations RA-19-0237, Catawba Station, Shearon Plant, McGuire Station, Oconee Nuclear Station and H.B. Robinson Plant - Response to NRC Regulatory Issue Summary 2019-02 Preparation and Scheduling of Operator Licensing Examinations2019-05-15015 May 2019 Catawba Station, Shearon Plant, McGuire Station, Oconee Nuclear Station and H.B. Robinson Plant - Response to NRC Regulatory Issue Summary 2019-02 Preparation and Scheduling of Operator Licensing Examinations ML19115A2282019-04-25025 April 2019 Exam 2019-301, Exam Administrative Items (Normal Release) ML19004A3402019-01-0303 January 2019 Operator Licensing Examination Approval 05000325/2019301 and 05000324/2019301 ML18239A4462018-08-27027 August 2018 302 Examination Draft Items (ADAMS-2A)- Delay Release 2 Yrs ML18239A4522018-08-27027 August 2018 302 Exam Administrative Items (ADAMS-2C)- Delay Release 2 Yrs ML18239A4532018-08-27027 August 2018 302 Exam Administrative Items (ADAMS-2D)- Delay Release 2 Yrs ML18239A4482018-08-27027 August 2018 302 Exam Final Items (ADAMS-2B)- Delay Release 2 Yrs RA-18-0049, Operating Test Outline, Written Examination Outline, and Reference Materials for Licensed Operator Initial Examination 50-325/2018-301 and 50-324/2018-3012018-06-25025 June 2018 Operating Test Outline, Written Examination Outline, and Reference Materials for Licensed Operator Initial Examination 50-325/2018-301 and 50-324/2018-301 IR 05000324/20183012018-06-25025 June 2018 Operating Test Outline, Written Examination Outline, and Reference Materials for Licensed Operator Initial Examination 50-325/2018-301 and 50-324/2018-301 ML18110A3212018-04-16016 April 2018 March 2018 - Brunswick NRC Generic Fundamentals Examination Results BSEP 17-0121, Post-Examination Documentation and Comments for Operator Retake Initial Examination2017-12-14014 December 2017 Post-Examination Documentation and Comments for Operator Retake Initial Examination IR 05000324/20173022017-12-12012 December 2017 (Retake) Operator Licensing Examination Approval 05000325/2017302 and 05000324/2017302 ML17298B1312017-10-25025 October 2017 05000325/2017-301 and 05000324/2017-301 Exam Draft Items ML17298B1732017-10-25025 October 2017 05000325/2017-301 and 324/2017-301 Exam Administrative Items ML17298B1612017-10-25025 October 2017 05000325/2017-301 and 324/2017-301 Exam Final Items ML17263A6222017-09-20020 September 2017 Reactor Operator and Senior Reactor Operator License Post-Examination Documentation and Comments 05000325/2017301 and 05000324/2017301 Post Exam Comments ML17263A6012017-09-20020 September 2017 Final RO Written as Given and Answer Sheet - Delay Release 2 Yrs ML17263A6042017-08-0808 August 2017 Final SRO Written as Given and Answer Sheet - Delay Release 2 Yrs ML17201B5072017-07-18018 July 2017 Operator Licensing Written Examination Approval 050003252017301 and 050003242017301 ML17181A4012017-06-30030 June 2017 Exam Administrative Items 2C - Delay Release ML17181A3952017-06-30030 June 2017 Exam Final Items 2B - Delay Release ML17181A3862017-06-30030 June 2017 Exam Draft Items 2A - Delay Release ML17181A3342017-06-30030 June 2017 Brunswick 2015301 ADAMS 2D - Exam Admin Items ML17032A2792017-01-27027 January 2017 Annual Letter - Generic Fundamentals Examination (GFE) Section of the Written Operator Licensing Examination for 2017 ML17012A3042017-01-27027 January 2017 Final RO Written Exam - Delay Release 2 Yrs ML17017A3852017-01-27027 January 2017 Final SRO Written Exam - Delay Release 2 Years ML17017A3892017-01-27027 January 2017 Post-Exam Comment - Delay Release 2 Yrs ML16334A5322016-11-21021 November 2016 Operator Licensing Written Examination Approval 05000325/2016301 and 05000324/2016301 ML16007A2122016-01-0707 January 2016 Initial Exam 2015-301 Post Exam Comments BSEP 15-0018, Updated Information Regarding Operator Licensing Examinations2015-03-0505 March 2015 Updated Information Regarding Operator Licensing Examinations ML14350A1612014-12-16016 December 2014 Initial Exam 2014-301 Final Simulator Scenarios ML14350A1732014-12-16016 December 2014 Initial Exam 2014-301 Final Administrative JPMs ML14350A1682014-12-16016 December 2014 Initial Exam 2014-301 Final Simulator In-Plant JPMs ML14350A1582014-12-16016 December 2014 Initial Exam 2014-301 Final Administrative Documents ML14350A1552014-12-16016 December 2014 Initial Exam 2014-301 Draft Administrative JPMs ML14350A1372014-12-16016 December 2014 Initial Exam 2014-301 Draft Simulator In-plant JPMs ML14350A1342014-12-16016 December 2014 Initial Exam 2014-301 Draft Simulator Scenarios ML14350A1312014-12-16016 December 2014 Initial Exam 2014-301 Draft SRO Written Exam ML14350A1252014-12-16016 December 2014 Initial Exam 2014-301 Draft RO Written Exam ML14350A1242014-12-11011 December 2014 Initial Exam 2014-301 Draft Administrative Documents 2023-03-06
[Table view] |
See also: IR 05000325/2007301
Text
- SCRAM CARD*ENSURE SCRAM VALVES ARE OPEN BY MANUAL!-.
OR ARlTRIP"\\*
REACTOR PRESSURE BETWEEN 800 AND 1000 PSIG*CONTROL REACTOR VESSEL LEVEL BETWEEN+.170 AN-D+200 INCHES*INSERT NUCLEAR INSTRUMENTATION
."*PLACE RECIRC PUMP SPEED CONTROLLERS
TO 10%*ENSURE HEATER DRAIN PUMPS ARE TRIPPED*ENSURE TURBINE OIL SYSTEM OPERATING*PLACE SULCV IN SERVICE
(((\
- STEP RC/Q-15"",I PERFORM"ALTERNATE
CONTROL ROO INSERTION" (EOP*01*LEP*02)STEP BASES: I RC/Q-15 Concurrent
execution of this step with the remainder of this procedure optimizes efforts to achieve reactor shutdown.EOP-01-LEP-02 (Alternate
Control Rod Insertion)
addresses alternate methods of control rod insertion.
Reactor shutdown on control rod insertion alone is preferable
to injecting boron for the following reasons: a.Boron injection contaminates
the primary system, requiring extensive cleanup and subsequent
inspection
before continued plant operation is possible.*b.If a leak occurs below the elevation of the reactor water level being maintained, boron injection may not be successful
in shutting down the reactor.c.A reactor shutdown on boron is not necessarily
a stable condition;
if boron is subsequently
diluted or displaced by a leak or an operational
error, the reactor could return to criticality.
Several alternate methods for inserting control rods are presented in EOP-01-LEP-02.
See the Step Discussions
for EOP-01-LEP-02
for a detailed discussion
of these methods.*1001-37.5 Rev.8 Page 87 of 90 I
- STEPS RCtO-OS through RCtO-10 (continued)
The Boron Injection Initiation
Temperature
is defined to be the greater of: a.The Suppression
Pool temperature
at which initiation
of a reactor scram is required by Technical Specifications, or b.The highest Suppression
Pool temperature
at which initiation
of boron injection using SLC will result in injection of the Hot Shutdown Boron Weight of boron before Suppression
Pool temperature
exceeds the Heat Capacity Temperature
Limit.Criterion b is a function of reactor power;a higher reactor power level causes higher integrated
heat energy to be rejected to the Suppression
Pool thus requiring a lower Suppression
Pool temperature
for initiation
of boron injection if the Heat Capacity Temperature
Limit is not to be exceeded before reactor shut down is achieved.At Brunswick, a single value is used for Boron Injection Initiation
Temperature
(110°F)for procedure simplification
.*1 001-37.5 Rev.8 Page 82 of 90 I
STEPS RC/O-OB through RC/O-10 YES NO RClQ*10 STEP BASES: If reactor power is above 2%, the operator is directed to inject boron.This is a conservative
action because with power above 2%, Suppression
Pool temperature
will steadily increase towards 110°F.This also allows sufficient
time for the Hot Shutdown Boron Weight of boron to be injected.The extra time may be needed since thealternatesystems
used for boron injection require significantly
more time to inject boron should the SLC System fail.The SLC system is initiated to shut down the reactor.As long as the core remains submerged (the preferred method of core cooling), fuel integrity and reactor vessel integrity are not directly challenged
even under
scram conditions.
A scram failure coupled with an MSIV isolation;
however, results in rapid heatup of the Suppression
Pool due to the steam discharged
from the reactor vesselviaSRVs.The challenge to containment
thus becomes the limiting factor which defines the requirement
for boron injection.
If Suppression
Pool temperature
and reactor pressure cannot be maintained
below the Heat Capacity Temperature
Limit, rapid depressurization
of the reactor vessel will be required.To avoid depressurizing
the reactor vessel with the reactor at power, it is desirable to shut down the reactor prior to reaching the Heat Capacity Temperature
Limit, thus minimizing
the quantity of heat rejected to the Suppression
Pool.The Boron Injection Initiation
Temperature
is defined so as to achieve this when practicable.
1001-37.5 Rev.8 Page 81 of 90 I
.*STEP RC/L-29 CAN REACTOR YES WATER LEVEL BE RESTORED ANO MAINTAINED
ABOVE LL*4
NO*STEP BASES: When reactor water level cannot be restored and maintained
above the LL-4, emergency depressurization
is required for the purpose of maximizing
injection flow from high head pumps and to permit injection from low-head pumps.Prior to emergency depressurization, high reactor pressure may have precluded injection from low-head pumps.Depressurizing
the reactor is preferred over restoring reactor water level through the use of systems which inject inside the shroud because: a.A large reactor power excursion may result from in-shroud injection.
b.Rapiddepressurization,by
itself, will reduce reactor power due to a substantial
increase in voids.c.Following the depressurization, reactor power will stabilize at a lower level.*1001-37.5 Rev.8 Page 29 of 90 I
Emergency depressurization
is not required until reactor water level cannot be restored and maintained
above LL-4 because: a.Adequate core cooling exists so long as reactor water level remains above LL-4, or even momentarily
drops below LL-4.b.The time during which reactor water level decreases to LL-4 can best be used to line up and start pumps in additional
injection systems listed in Table 1, which might not yet have been placed in service.**1001-37.5 Rev.8 Page 30 of 90 I
- STEPS RC/P-40 and RC/P-41 I (TERMINATE AND PREVENT\INJECTION TO THE REACTOR VESSEL FROM THE FOLLOWING SYSTEMS UNLESS THE SYSTEM IS BEING USED TO INJECT BORON:*CONDENSATEJFEEDWATER
- HPCI*RHR*CORE SPRAY*ALTERNATE COOLANT\INJECTION SYSTEMS J I RCIP-40 WHEN INJECTION TO THE REACTOR VESSEL FROM THE SPECIFIED SYSTEMS HAS BEEN TERMINATED
AND PREVENTED, RAPIDLY DEPRESSURIZE
THE REACTOR IRRESPECTIVE
OF RESULTING COOLDOWN RATE AS FOLLOWS I RClP-41
the reactor vessel is terminated
and prevented before Emergency Depressurization
proceeds in order to prevent uncontrolled
injection of large amount of cold water as reactor pressure decreases below the shutoff head of operating system pumps.Injection from boron injection systems and CRD is not terminated
because operation of these systems may be needed to establish and maintain reactor shutdown.Further, the injection flow rates from these systems are small compared to those of the other systems used to control reactor water level.Injection from RCIC is not terminated
because the injection flow rate from this system is small, continued operation of the turbine aids in depressuring
the reactor vessel, and operation during reactor depressurization
is not expected to result in significant
injection flow rate variations.
Only when the listed systems have been terminated
and prevented is emergency depressurization
allowed.*1001-37.5 Rev.8 Page 66 of 90 I
(
RPS if required.NOTE Manpower Required: Special Equipment:
1 Control Operator 4 jumpers (15,16,17, and 18)co: co: 1.2.Unit 1 Only: ENSURE the REACTOR MODE SWITCH, C71-S1, is in*SHUTDOWN.*
Unit 2 Only: IF steam flow is less than3X 10 6 lb/hr, THEN ENSURE the REACTOR MODE SWITCH, C72-S1,i"S
in RSHUTDOWNR.
NOTE Steps 3 and 4 may be performed concurrently.
3.IF an automatic scram signal is present AND power is available to the RPS bus, THEN INSTALL the following jumpers to bypass the reactor scram:**co: co: co: co: a.b.c.d.Jumper 15 in Panel H12-P609, Terminal Board DD, from the right side of Fuse C71A(C72A)-F14A
to Terminal 4 of Relay C71A(C72A)-K12E.
Jumper 16 in Panel H12-P609, Terminal Board BB, from the left side of Fuse C71A(C72A)-F14C
to Terminal 4 of Relay C71A(C72A)-K12G.Jumper 17 in Panel H12-P611, Terminal Board DD, from the right side of Fuse C71A(C72A)-F14B
to Terminal 4 of Relay C71A(C72A)-K12F.Jumper 18 in Panel H12-P611, Terminal Board BB, from the left side of Fuse C71A(C72A)-F14D
to Terminal 4 of Relay C71A(C72A)-K12H.I OEOP-01-LEP-02
Rev.25 Page 13 of 281
Section 3-Continued*4.INHIBIT ARI by performing
the following steps;co: co: co: a.b.c.PLACE ARI AUTO/MANUAL
INITIATION
switch, Cll(C12)-CS-5560, to"INOP".PLACE ARI RESET switch (spring return), Cll(C12)-CS-5562, to"RESET" and
for a minimum of five (5)seconds, THEN RELEASE.VERIFY the red"TRIP" light located above ARI INITIATION, Cll(C12)-CS-556l
is off.co: 5.ENSURE the DISCH VOL VENT&DRAIN TEST switch is in"ISOLATE".
6.VERIFY the following valves are closed: RESET RPS.d.DISCH VOL DRAIN VLV Cll(C12)-CV-FOll
- co: co: co: co: co: 7.a.b.c.DISCH VOL VENT VLV Cll(C12)-V139
DISCH VOL VENT VLV Cll(C12)-CV-F010
DISCH VOL DRAIN VLV Cll(C12)-V140
co: co: 8.9.IF RPS CANNOT be reset, THEN RETURN to Step C.6 on Page 2.PLACE the DISCH VOL VENT&DRAIN TEST switch to"NORMAL".10.VERIFY the following valves are open:*co: co:
co: co: a.b.c.d.DISCH VOL VENT VLV Cll(C12)-V139
DISCH VOL VENT VLV Cll(C12)-CV-F010
DISCH VOL DRAIN VLV Cll(C12)-V140
DISCH VOL DRAIN VLV Cll(C12)-CV-FOll
I OEOP-01-LEP-02
Rev.25 Page 14 of 281
2 minutes OR SDV HI-HI LEVEL RPS TRIP annunciator (A-OS 1-6)clears, THEN CONTINUE in this procedure.
NOTE" IF venting control rod over piston area in accordance
with Section 6, THEN the AO should be notified so venting can be secured, prior to inserting a manual SCRAM.CO: 12.Manually SCRAM the reactor.13.IF control rods moved inward, THEN PERFORM the following:
14.IF control rods DID NOT move inward, THEN RETURN to Step C.6 on Page2.**CO: CO: CO: a.b.IF all control rods are inserted to or beyond position DO, THEN RETURN to Step C.6 on Page 2.IF all control rods are NOT inserted to or beyond Position DO, THEN RETURN to Step S on Page 14.I OEOP-01-LEP-02
Rev.25 Page 15 of 281