ML062630096: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 9: | Line 9: | ||
| docket = 05000259 | | docket = 05000259 | ||
| license number = DPR-033 | | license number = DPR-033 | ||
| contact person = Chernoff M | | contact person = Chernoff M, NRR/DORL, 415-4041 | ||
| case reference number = TAC MC2305 | | case reference number = TAC MC2305 | ||
| package number = ML062630002 | | package number = ML062630002 | ||
Line 33: | Line 33: | ||
The nominal Trip Setpoint shall be specified on design output documentation which is incorporated by reference in the Updated Final Safety Analysis Report. The methodology used to determine the nominal Trip Setpoint, the predefined As Found Tolerance, and the As Left Tolerance band, and a listing of the setpoint design output documentation shall be specified in Chapter 7 of the Updated Final Safety Analysis Report.BFN-UNIT 1 3.3-46 BFN-NIT1 3.-46Amendment No. 234, 25:7, 258 ECCS Instrumentation. | The nominal Trip Setpoint shall be specified on design output documentation which is incorporated by reference in the Updated Final Safety Analysis Report. The methodology used to determine the nominal Trip Setpoint, the predefined As Found Tolerance, and the As Left Tolerance band, and a listing of the setpoint design output documentation shall be specified in Chapter 7 of the Updated Final Safety Analysis Report.BFN-UNIT 1 3.3-46 BFN-NIT1 3.-46Amendment No. 234, 25:7, 258 ECCS Instrumentation. | ||
3.3.5.1 Table 3.3.5.1-1 (page 6 of 6)Emergency Core Cooling System Instrumentation APPLICABLE CONDITIONS MODES REQUIRED REFERENCED FUNCTION OR OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIRED REQUIREMENTS VALUE CONDITIONS FUNCTION ACTION A.1 5. ADS Trip System B (continued) | 3.3.5.1 Table 3.3.5.1-1 (page 6 of 6)Emergency Core Cooling System Instrumentation APPLICABLE CONDITIONS MODES REQUIRED REFERENCED FUNCTION OR OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIRED REQUIREMENTS VALUE CONDITIONS FUNCTION ACTION A.1 5. ADS Trip System B (continued) | ||
: c. Automatic Depressurization 1I G SR 3.3.5.1.5 | : c. Automatic Depressurization 1I G SR 3.3.5.1.5 | ||
:5115 System Initiation Timer 2 (d), 3 (d) SIR 3.3.5.1.6 seconds d. Reactor Vessel Water Level 1 , 1 F SIR 3.3.5.1.1 528 ince-Low, Level 3 2 (d), 3 (d) SR 3.3.5.1.2 above vessel (Confirmatory)(e) | :5115 System Initiation Timer 2 (d), 3 (d) SIR 3.3.5.1.6 seconds d. Reactor Vessel Water Level 1 , 1 F SIR 3.3.5.1.1 528 ince-Low, Level 3 2 (d), 3 (d) SR 3.3.5.1.2 above vessel (Confirmatory)(e) | ||
SIR 3.3.5.1.5 zero SR 3.3.5.1.6 a. Core Spray Pump Discharge 1 , 4 G SIR 3.3.5.1.2 2!175 psig Pressure -High 2 (d), 3 (d) SR 3.3.5.1.3 and SR 3.3.5.1.6 | SIR 3.3.5.1.5 zero SR 3.3.5.1.6 a. Core Spray Pump Discharge 1 , 4 G SIR 3.3.5.1.2 2!175 psig Pressure -High 2 (d), 3 (d) SR 3.3.5.1.3 and SR 3.3.5.1.6 | ||
<-195 psig f. Low Pressure Coolant 1, 8 G SIR 3.3.5.1.2 2:90 psig and Injection Pump Discharge 2 (d), 3 (d) SIR 3.3.5.1.3 | <-195 psig f. Low Pressure Coolant 1, 8 G SIR 3.3.5.1.2 2:90 psig and Injection Pump Discharge 2 (d), 3 (d) SIR 3.3.5.1.3 | ||
< 110psig Pressure -High SIR 3.3.5.1.6 g. Automatic Depressurization | < 110psig Pressure -High SIR 3.3.5.1.6 g. Automatic Depressurization | ||
: 1. 2 G SIR 3.3.5.1.5 | : 1. 2 G SIR 3.3.5.1.5 | ||
:5322 System High Drywell 2()()SIR 3.3.5.1.6 seconds Pressure Bypass Timer 2 d, 3 d (d) With reactor steam dome pressure > 150 psig.(e) During instrument calibrations, if the As Found channel setpoint is conservative with respect to the Allowable Value but outside its acceptable As Found band as defined by its associated Surveillance Requirement procedure, then there shall be an initial determination to ensure confidence that the channel can perform as required before retumning the channel to service in accordance with the Surveillaince, if the As Found instrument channel setpoint is not conservative with respect to the Allowable Value, the channel shall be declared inoperable. | :5322 System High Drywell 2()()SIR 3.3.5.1.6 seconds Pressure Bypass Timer 2 d, 3 d (d) With reactor steam dome pressure > 150 psig.(e) During instrument calibrations, if the As Found channel setpoint is conservative with respect to the Allowable Value but outside its acceptable As Found band as defined by its associated Surveillance Requirement procedure, then there shall be an initial determination to ensure confidence that the channel can perform as required before retumning the channel to service in accordance with the Surveillaince, if the As Found instrument channel setpoint is not conservative with respect to the Allowable Value, the channel shall be declared inoperable. | ||
Prior to retumning a channel to service, the instrument channel setpoint shall be calibrated to a value that is within the acceptable As Left tolerance of the setpoint; otherwise, the channel shall be declared inoperable. | Prior to retumning a channel to service, the instrument channel setpoint shall be calibrated to a value that is within the acceptable As Left tolerance of the setpoint; otherwise, the channel shall be declared inoperable. | ||
Line 56: | Line 56: | ||
: h. Reactor Vessel Water Level -Low, Level 3 6. Shutdown Coaling System Isolation a. Reactor Steam Dome Pressure -High b. Reactor Vessel Water Level -Low, Level 3 c. Drywell Pressure -High 1,2.3 1,2,3 1,2,3 1,2,3 1.2,3 1.2.3 1,2 1,2,3 2 2 2 2 2 2 1 (a)2 F S R 3.3.6.1.2 S R 3.3.6.1.4 S R 3.3.6.1.6 F S R 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1,2 S R 3.3.6.1.4 S R 3.3.6.1.6 F SR 3.3.6.1.2 S R 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 H SR 3.3.6.1.6 F SR 3,3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5201*F!5 135*F5 152*F:5 152*F:5 143*F:5 170*F NA!528 inches above vessel zero I 1.2,3 3A45 1.2,3 2 (b)2 F SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 1 SR 3.3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 F SR 3.3.8.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5 115 psig 2: 528 Inches above vessel zero I:52.5 psig (a) One SLO: System Initiation signal p rovides logic input to cl ise both RWCU valves.(b) Only one channel per trip system required in MODES 4 and 5 when RHR Shutdown Cooling System integrity maintained. | : h. Reactor Vessel Water Level -Low, Level 3 6. Shutdown Coaling System Isolation a. Reactor Steam Dome Pressure -High b. Reactor Vessel Water Level -Low, Level 3 c. Drywell Pressure -High 1,2.3 1,2,3 1,2,3 1,2,3 1.2,3 1.2.3 1,2 1,2,3 2 2 2 2 2 2 1 (a)2 F S R 3.3.6.1.2 S R 3.3.6.1.4 S R 3.3.6.1.6 F S R 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1,2 S R 3.3.6.1.4 S R 3.3.6.1.6 F SR 3.3.6.1.2 S R 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 H SR 3.3.6.1.6 F SR 3,3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5201*F!5 135*F5 152*F:5 152*F:5 143*F:5 170*F NA!528 inches above vessel zero I 1.2,3 3A45 1.2,3 2 (b)2 F SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 1 SR 3.3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 F SR 3.3.8.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5 115 psig 2: 528 Inches above vessel zero I:52.5 psig (a) One SLO: System Initiation signal p rovides logic input to cl ise both RWCU valves.(b) Only one channel per trip system required in MODES 4 and 5 when RHR Shutdown Cooling System integrity maintained. | ||
BFN-UNIT 1 -3.3-60 BFN-NIT1 3.-60Amendment No.-234-; | BFN-UNIT 1 -3.3-60 BFN-NIT1 3.-60Amendment No.-234-; | ||
258 Secondary Containment Isolation Instrumentation 3.3.6.2 Table 3.3.6.2-1 (page 1 of 1)Secondary Containment Isolation Instrumentation APPLICABLE MODES OR REQUIRED FUNCTION OTHER CHANNELS SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIREMENTS VALUE CONDITIONS TRIP SYSTEM 1. Reactor Vessel Water Level -1,2A3 2 SR 3.3.6.2.1 | 258 Secondary Containment Isolation Instrumentation 3.3.6.2 Table 3.3.6.2-1 (page 1 of 1)Secondary Containment Isolation Instrumentation APPLICABLE MODES OR REQUIRED FUNCTION OTHER CHANNELS SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIREMENTS VALUE CONDITIONS TRIP SYSTEM 1. Reactor Vessel Water Level -1,2A3 2 SR 3.3.6.2.1 | ||
:528 inches Low, Level 3 (a) SR 3.3.6.2.2 above vessel zero SR 3.3.6.2.3 SR 3.3.6.2.4 2. Drywell Pressure -High 1,2,3 2 SR 3.3.6.2.2 | :528 inches Low, Level 3 (a) SR 3.3.6.2.2 above vessel zero SR 3.3.6.2.3 SR 3.3.6.2.4 2. Drywell Pressure -High 1,2,3 2 SR 3.3.6.2.2 | ||
!52.5 psig SR 3.3.6.2.3 SR 3.3.6.2.4 3. Reactor Zone Exhaust 1,2,3, 1 SR 3.3.6.2.1 | !52.5 psig SR 3.3.6.2.3 SR 3.3.6.2.4 3. Reactor Zone Exhaust 1,2,3, 1 SR 3.3.6.2.1 | ||
:5 100 mRlhr Radiation | :5 100 mRlhr Radiation | ||
-High (a) SR 313.6.2.2 SR 3.3.6.2.3 SIR 3.3.6.2.4 4. Refueling Floor Exhaust 1.2,3, 1 SR 3.3.6.2.1 5100 mR/hr Radiation | -High (a) SR 313.6.2.2 SR 3.3.6.2.3 SIR 3.3.6.2.4 4. Refueling Floor Exhaust 1.2,3, 1 SR 3.3.6.2.1 5100 mR/hr Radiation | ||
-High (a) SR 3.3.6.2.2 SR 3.3.6.2.3 SR 3.3.6.2.4 I (a) During operations with a potential for draining the reactor vessel.BFN-UNIT 1 3.3-64 BEN-NITI 3.-64Amendment No. 234, 251, 258 CREV System Instrumentation 3.3.7.1 Table 3.3.7.1-1 (page 1 of 1)Control Room Emergency Ventilation System Instrumentation APPLICABLE CONDITIONS MODES OR REQUIRED REFERENCED FUNCTION OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER TRIP REQUIRED REQUIREMENTS VALUE CONDITIONS SYSTEM ACTION A.1 1. Reactor Vessel Water Level -1,2,3,(a) 2 B SR 3.3.7.1.1 2!528 inches Low, Level 3 SR 3.3.7.1.2 above vessel SR 3.3.7.1.5 zero SR 3.3.7.1.6 2. Drywell Pressure -High 1,2,3 *2 B SR 3.3.7.1.2 | -High (a) SR 3.3.6.2.2 SR 3.3.6.2.3 SR 3.3.6.2.4 I (a) During operations with a potential for draining the reactor vessel.BFN-UNIT 1 3.3-64 BEN-NITI 3.-64Amendment No. 234, 251, 258 CREV System Instrumentation 3.3.7.1 Table 3.3.7.1-1 (page 1 of 1)Control Room Emergency Ventilation System Instrumentation APPLICABLE CONDITIONS MODES OR REQUIRED REFERENCED FUNCTION OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER TRIP REQUIRED REQUIREMENTS VALUE CONDITIONS SYSTEM ACTION A.1 1. Reactor Vessel Water Level -1,2,3,(a) 2 B SR 3.3.7.1.1 2!528 inches Low, Level 3 SR 3.3.7.1.2 above vessel SR 3.3.7.1.5 zero SR 3.3.7.1.6 2. Drywell Pressure -High 1,2,3 *2 B SR 3.3.7.1.2 | ||
<52.5 psig SR 3.3.7.1.5 SR 3.3.7.1.6 3. Reactor Zone Exhaust 1,2,3 1 C SR 3.3.7.1.1 5 100 mRlhr Radiation | <52.5 psig SR 3.3.7.1.5 SR 3.3.7.1.6 3. Reactor Zone Exhaust 1,2,3 1 C SR 3.3.7.1.1 5 100 mRlhr Radiation | ||
-High (a) SR 3.3.7.1.2 SR 3.3.7.1.5 SR 3.3.7.1.6 4. Refueling Floor Exhaust 1,2,3, 1 C SR 3.3.7.1.1 | -High (a) SR 3.3.7.1.2 SR 3.3.7.1.5 SR 3.3.7.1.6 4. Refueling Floor Exhaust 1,2,3, 1 C SR 3.3.7.1.1 | ||
:5100 mR/hr Radiation | :5100 mR/hr Radiation | ||
-High (a) SR 3.3.*7.1.2 SIR 3.3.7.1.5 SR 3.3.7.1.6 5. Control Room Air Supply Dtict 1,2,3, 1 D SR 3.3.7.1.1 5270 cpm Radiation | -High (a) SR 3.3.*7.1.2 SIR 3.3.7.1.5 SR 3.3.7.1.6 5. Control Room Air Supply Dtict 1,2,3, 1 D SR 3.3.7.1.1 5270 cpm Radiation | ||
-High (a) SR 3.3.7.1.2 above SR 3.3.7.1.3 background SR 3.3.7.1.4 I.(a) During operations with a potential for draining the reactor vessel.BFN-UNIT 1 3.3-69 BFN-NIT1 3.-69Amendment No. 234, 251, 258}} | -High (a) SR 3.3.7.1.2 above SR 3.3.7.1.3 background SR 3.3.7.1.4 I.(a) During operations with a potential for draining the reactor vessel.BFN-UNIT 1 3.3-69 BFN-NIT1 3.-69Amendment No. 234, 251, 258}} |
Revision as of 12:50, 13 July 2019
ML062630096 | |
Person / Time | |
---|---|
Site: | Browns Ferry ![]() |
Issue date: | 09/18/2006 |
From: | NRC/NRR/ADRO/DORL/LPLII-2 |
To: | |
Chernoff M, NRR/DORL, 415-4041 | |
Shared Package | |
ML062630002 | List: |
References | |
TAC MC2305 | |
Download: ML062630096 (8) | |
Text
-3-(3) Pursuant to the Act and 10 CFR Parts 30, 40, and 70, to receive, possess, and use at any time any byproduct, source, and special nuclear material as sealed neutron sources for reactor startup, sealed sources for reactor instrumentation and radiation monitoring equipment calibration, and as fission detectors in amounts as required;(4) Pursuant to the Act and 10 CFR Parts 30, 40, and 70, to receive, possess, and use in amounts as required any byproduct, source, or special nuclear material without restriction to chemical or physical form for sample analysis or equipment and instrument calibration or associated with radioactive apparatus or components; (5) Pursuant to the Act and 10 CFR Parts 30 and 70, to possess but not separate, such byproduct and special nuclear materials as may be produced by the operation of the facility.C. This renewed operating license shall be deemed to contain and is subject to the conditions specified in the following Commission regulations in 10 CFR Chapter 1: Part 20, Section 30.34 of Part 30, Section 40.41 of Part 40, Sections 50.54 and 50.59 of Part 50, and Section 70.32 of Part 70, is subject to all applicable provisions of the Act and to the rules, regulations, and orders of the Commission now or hereafter in effect; and is subject to the additional conditions.
specified or incorporated below: (1) Maximum Power Level The licensee is authorized to operate the facility at steady state reactor core power levels not in excess of 3293 megawatts thermal..(2) Technical Sl~ecifications The Technical Specifications contained in Appendices A and B, as revised through Amendment
'No. 258,' are hereby incorporated in the renewed operating license. The, licensee shall operate the facility in accordance with the Technical Specif ications.For Surveillance Requirements (SRs) that are new in Amendment 234 to Facility Operating License DPR-33, the first performance is due at the end of the first surveillance interval that begins at implementation of the Amendment 234. For SRs that existed prior to Amendment 234, including SRs with modified acceptance criteria and SRs whose frequency of performance is being extended, the first performance is due at the end of the first surveillance interval that begins on the date the surveillance was last performed prior to implementation of Amendment 234.Renewed License No. DPR-33 Amendment No.. 258 RPS Instrumentation 3.3.1.1 Table 3.3.1.1-1 (page 2 of 3)Reactor Protection System Instrumentation APPLICABLE CONDITIONS.MODES OR REQUIRED REFERENCED FUNCTION OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER TRIP REQUIRED REQUIREMENTS VALUE CONDITIONS SYSTEM ACTION D.1 Monitors (continued)
- d. Downscale 1 e.. Inop 1,2 1.2 2 2 3. Reactor Vessel Steam Dome Pressure -High(d)4. Reactor Vessel Water Level -Low, Level 3 (d)5. Main Steam Isolation Valve -Closure 6. Drywell Pressure -High*7. Scram Discharge Volume Water Level -High a. Resistance Temperature Detector F SR 3.3.1.1.7 SR 3.3.1.1.8 SR 3.3.1.1.14 G SR 3.3.1.1.7 SR 3.3.1.1.8 SR 3.3.1.1.14 G SR 3.3.1.1.1 SR 3.3.1.1.8 SR 3.3.1.1.10 SR 3.3.1.1.14 G SR 3.3.1.1.1 SR 3.3.1.1.8 SR 3.3.1.1.13 SR 3.3.1.1.14
>-3% RTP NA!S 1055 psig 2!528 inches above vessel zero:5 10% closed!2.5 psig 1,2 1 1,2 2 8 2 I IF SR 3.3.1.1.8 SR 3.3.1.1.13 SR 3.3.1.1.14 G SR 3.3.1.1.8 SR 3.3.1.1.13 SR 3.3.1.1.14 1,2 2 2 G H SR 3.3.1.1.8 SR 3.3.1.1.13 SR 3.3.1.1.14 SR 3.3.1.1.8 SR 3.3.1.1.13 SR 3.3.1.1.14
ý5 50 gallons! 50 gallons 5(a)(continued)(a) With any control rod withdrawn from a core cell containing one or more fuel assemblies.(d) During instrument calibrations, If the As Found channel setpoint Is conservative with respect to the Allowable Value but outside its acceptable As Found band as defined by its assocated Surveillance Requirement procedure, then there shall be an initial determination to ensure confidence that the channof can perform as required before retumning the channel to service in accordance with the Surveillance.
If the As Found in strument channel setpoint is not conservative with respect to the Allowable Value, the channel shall be declared inoperable.
Prior to retumning a channel to service, the instrument channel setpoint shall be calibrated to a value that is within the acceptable As Left tolerance of the setpoint; otherwise, the channel shall be declared inoperable.
The nominal Trip Setpoint shall be specified on design output documentation which is incorporated by reference in the Updated Final Safety Analysis Report. The methodology used to determine the nominal Trip Setpoint, the predefined As Found Tolerance, and the As Left Tolerance band, and a listing of the setpoint design output documentation shall be specified in Chapter 7 of the Updated Final Safety Analysis Report.BFN-UNIT 1 3.3-7 BEN-NIT1 33-7Amendment No. 234, 257 258 E.COS Instrumentation 3.3.5.1 Table 3.3.5.1-1 (page 5 of 6)Emergency Care Cooling System Instrumentation APPLICABLE CONDITIONS MODES REQUIRED REFERENCED FUNCTION OR OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIRED REQUIREMENTS VALUE CONDITIONS FUNCTION ACTION A.1 4. ADS Trip System A (continued) b; Drywell Pressure -High(e)c. Automatic Depressurization System Initiation Timer d. Reactor Vessel Water Level-Low, Level 3 (Confirmatory)(e)
- e. Core Spray Pump Discharge Pressure -High f. Low Pressure Coolant Injection Pump Discharge Pressure -High g. Automatic Depressurization System High Drywell Pressure Bypass Timer 1, 2 (d), 3 (d)1 , 2 (d), 3 (d)1 , 2 (d), 3 (d)1 , 2 (d), 3 (d)2 (d), 3 (d)1 , 2 (d), 3 (d)1, 2 (d). 3 (d)2 4 F SIR 3.3.5.1.2 SR 3.3.5.1.5 SR 3.3.5.1.6 G SIR 3.3.5.1.5 SR 3.3.5.1.6 F SIR 3.3 .5.1.1 SR 3.3.5.1.2 SIR 3.3.5.1.5 SR 3.3.5.1.6 G SIR 3.3.5.1.2 SIR 3.3.5.1.3 SR 3.3.5.1.6 G SIR 3.3.5.1.2 SIR 3.3.5.1.3 SIR 3.3.5.1.6 G SIR 3.3.5.1.5 SR 3.3.5.1.6:5 2.5 psig:5115 secondsýt528 inches above vessel zero I- 175 psig and<- 95 psig.8 2ý 90 psig and 5 110 psig:5 322 seconds 5. ADS Trip System B a. Reactor Vessel Water Level-Low Low Low, Level I (e)b. Drywell Pressure -High(e)2 F SIR 3.3.5.1.1 SIR 3.3.5.1.2 SIR 3.3.5.1.5 SR 3.3.5.1.6 F SIR 3.3.5.1.2 SR 3.3.5.1.5 SR 3.3.5.1.6 2ý398 inches above vessel zero:5 2.5 psig 2 (d) With reactor steam dome pressure > 150 psig.(cniud (e) During instrument calibrations, if the As. Found channel setpoint is conservative with respect to the Allowable Value but outside its acceptable As Found band as defined by its associated Surveillance Requirement procedure, then there shall be an initial determination to ensure confidence that the channel can perform as required before returning the channel to service in accordance with the Surveillance.
If the As Found instrument channel setpoint is not conservative with respect to the Allowable Value, the channel shall be declared inoperable.
Prior to returning a channel to service, the instrument channel setpoint shall be calibrated to a value that is within the acceptable As Left tolerance of the setpoint; otherwise, the channel shall be declared inoperable.
The nominal Trip Setpoint shall be specified on design output documentation which is incorporated by reference in the Updated Final Safety Analysis Report. The methodology used to determine the nominal Trip Setpoint, the predefined As Found Tolerance, and the As Left Tolerance band, and a listing of the setpoint design output documentation shall be specified in Chapter 7 of the Updated Final Safety Analysis Report.BFN-UNIT 1 3.3-46 BFN-NIT1 3.-46Amendment No. 234, 25:7, 258 ECCS Instrumentation.
3.3.5.1 Table 3.3.5.1-1 (page 6 of 6)Emergency Core Cooling System Instrumentation APPLICABLE CONDITIONS MODES REQUIRED REFERENCED FUNCTION OR OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIRED REQUIREMENTS VALUE CONDITIONS FUNCTION ACTION A.1 5. ADS Trip System B (continued)
- c. Automatic Depressurization 1I G SR 3.3.5.1.5
- 5115 System Initiation Timer 2 (d), 3 (d) SIR 3.3.5.1.6 seconds d. Reactor Vessel Water Level 1 , 1 F SIR 3.3.5.1.1 528 ince-Low, Level 3 2 (d), 3 (d) SR 3.3.5.1.2 above vessel (Confirmatory)(e)
SIR 3.3.5.1.5 zero SR 3.3.5.1.6 a. Core Spray Pump Discharge 1 , 4 G SIR 3.3.5.1.2 2!175 psig Pressure -High 2 (d), 3 (d) SR 3.3.5.1.3 and SR 3.3.5.1.6
<-195 psig f. Low Pressure Coolant 1, 8 G SIR 3.3.5.1.2 2:90 psig and Injection Pump Discharge 2 (d), 3 (d) SIR 3.3.5.1.3
< 110psig Pressure -High SIR 3.3.5.1.6 g. Automatic Depressurization
- 1. 2 G SIR 3.3.5.1.5
- 5322 System High Drywell 2()()SIR 3.3.5.1.6 seconds Pressure Bypass Timer 2 d, 3 d (d) With reactor steam dome pressure > 150 psig.(e) During instrument calibrations, if the As Found channel setpoint is conservative with respect to the Allowable Value but outside its acceptable As Found band as defined by its associated Surveillance Requirement procedure, then there shall be an initial determination to ensure confidence that the channel can perform as required before retumning the channel to service in accordance with the Surveillaince, if the As Found instrument channel setpoint is not conservative with respect to the Allowable Value, the channel shall be declared inoperable.
Prior to retumning a channel to service, the instrument channel setpoint shall be calibrated to a value that is within the acceptable As Left tolerance of the setpoint; otherwise, the channel shall be declared inoperable.
The nominal Trip Setpoint shall be specified on design output documentation which is incorporated by reference in the Updated Final Safety Analysis Report. The methodology used to determine the nominal Trip Setpoint, the predefined As Found Tolerance, and the As Left Tolerance band, and a listing of the setpoint design output documentation shall be specified in Chapter 7 of the Updated Final Safety Analysis Report.BFN-UNIT 1 3.3-47 BEN-NITI 3.-47Amendment No. 234, 257, 258 Primary Containment Isolation Instrumentation 3.3.6.1 Table 3.3.6.1-1 (page 1 of 31)Primary Containment Isolation Instrumentation APPLICABLE CONDITIONS MODES OR REQUIRED REFERENCED FUNCTION OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER TRIP REQUIRED REQUIREMENTS VALUE CONDITIONS SYSTEM ACTION CA1 1. Main Steam Line Isolation a. Reactor Vessel Water Level -Low Low Low, Level 1 b. Main Steam Line Pressure-Low(C)c. Main Steam Line Flow -High d. Main Steam Tunnel Temperature
-High.2. Primary Containment Isolation a. Reactor Vessel Water Level' -Low, Level 3 b. Drywell Pressure -High 3. High Pressure Coolant Injection (HPCI) System Isolation a. HPCI Steam Line Flow -High b. HPCI Steam Supply Line Pressure -Low c. HPCI Turbine Exhaust Diaphragm Pressure -High 1,2,3 1 1,2,3 1,2,3 2 2 2 per MSL 8 D SR 3.3.6.1.1 SR -3.3.6.1.2 SR 3.3.6.1.5 SIR 3.3.6.1.6 E SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 D SR 3.3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 D SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 G SR 3.3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 G SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6t 398 inches above vessel zero 2:825 psig:5 140% rated steam flow 5 200OF 1,2,3 1,2,3 2 2 2:528 inches above vessel zero I:52.5 psig 1,2.3 1.2.3 1.2,3 1 3 F SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5 90 psi k 100 psig ,q 20 psig (continued)(c) During instrument calibrations, If the As Found channel setpoint is conservative with respect to the Allowable Value but outside its acceptable As Found band as defined by its associated Surveillance Requirement procedure, then there shall be an initial determination to ensure confidence that the channel can perform as required before returning the channel to service in accordance with the Surveillance.
If the As Found instrument channel setpoint is not conservative with respect to the Allowable Value, the channel shall be declared inoperable.
Prior to returning a channel to service, the instrument channel setpoint shall be calibrated to a value that is within the acceptable As Left tolerance of the setpoint:
otherwise, the channel shall be declared inoperable.
The nominal Trip Setpoint shall be specified on design output documentation which is incorporated by reference in the Updated Final Safety Analysis Report. The methodology used to determine the nominal Trip Selpoint.
the predefined As Found Tolerance, and the As Left Tolerance band, and a listing of the setpoint design output documentation shall be specified in Chapter 7 of the Updated Final Safety Analysis Report.BFN-UNIT I 3.3-58 BFNUNI I3.358AmendmenF No. 3-q2A -.n-r72058 Primary Containment Isolation Instrumentation 3.3.6.1 Table 3.3.6.1 -1 (page 3 of 3)Primary Containment Isolation Instrumentation APPLICABLE CONDITIONS MODES OR REQUIRED REFERENCED FUNCTION OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER TRIP REQUIRED REQUIREMENTS VALUE CONDITIONS SYSTEM ACTION CA1 5. Reactor Water Cleanup (RWCU) System Isolation a. Main Steam Valve Vault Area Temperature
-High b. Pipe Trench Area Temperature
-High c. Pump Room A Area Temperature
-High d. Pump Room B Area Temperature
-High e. Heat Exchanger Room Area (West Wall)Temperature
-High f. Heat Exchanger Room Area (East Wall)Temperature
-High g. SLC System Initiation
- h. Reactor Vessel Water Level -Low, Level 3 6. Shutdown Coaling System Isolation a. Reactor Steam Dome Pressure -High b. Reactor Vessel Water Level -Low, Level 3 c. Drywell Pressure -High 1,2.3 1,2,3 1,2,3 1,2,3 1.2,3 1.2.3 1,2 1,2,3 2 2 2 2 2 2 1 (a)2 F S R 3.3.6.1.2 S R 3.3.6.1.4 S R 3.3.6.1.6 F S R 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1,2 S R 3.3.6.1.4 S R 3.3.6.1.6 F SR 3.3.6.1.2 S R 3.3.6.1.4 SR 3.3.6.1.6 F SR 3.3.6.1.2 SR 3.3.6.1.4 SR 3.3.6.1.6 H SR 3.3.6.1.6 F SR 3,3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5201*F!5 135*F5 152*F:5 152*F:5 143*F:5 170*F NA!528 inches above vessel zero I 1.2,3 3A45 1.2,3 2 (b)2 F SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 1 SR 3.3.6.1.1 SR 3.3.6.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6 F SR 3.3.8.1.2 SR 3.3.6.1.5 SR 3.3.6.1.6:5 115 psig 2: 528 Inches above vessel zero I:52.5 psig (a) One SLO: System Initiation signal p rovides logic input to cl ise both RWCU valves.(b) Only one channel per trip system required in MODES 4 and 5 when RHR Shutdown Cooling System integrity maintained.
BFN-UNIT 1 -3.3-60 BFN-NIT1 3.-60Amendment No.-234-;
258 Secondary Containment Isolation Instrumentation 3.3.6.2 Table 3.3.6.2-1 (page 1 of 1)Secondary Containment Isolation Instrumentation APPLICABLE MODES OR REQUIRED FUNCTION OTHER CHANNELS SURVEILLANCE ALLOWABLE SPECIFIED PER REQUIREMENTS VALUE CONDITIONS TRIP SYSTEM 1. Reactor Vessel Water Level -1,2A3 2 SR 3.3.6.2.1
- 528 inches Low, Level 3 (a) SR 3.3.6.2.2 above vessel zero SR 3.3.6.2.3 SR 3.3.6.2.4 2. Drywell Pressure -High 1,2,3 2 SR 3.3.6.2.2
!52.5 psig SR 3.3.6.2.3 SR 3.3.6.2.4 3. Reactor Zone Exhaust 1,2,3, 1 SR 3.3.6.2.1
- 5 100 mRlhr Radiation
-High (a) SR 313.6.2.2 SR 3.3.6.2.3 SIR 3.3.6.2.4 4. Refueling Floor Exhaust 1.2,3, 1 SR 3.3.6.2.1 5100 mR/hr Radiation
-High (a) SR 3.3.6.2.2 SR 3.3.6.2.3 SR 3.3.6.2.4 I (a) During operations with a potential for draining the reactor vessel.BFN-UNIT 1 3.3-64 BEN-NITI 3.-64Amendment No. 234, 251, 258 CREV System Instrumentation 3.3.7.1 Table 3.3.7.1-1 (page 1 of 1)Control Room Emergency Ventilation System Instrumentation APPLICABLE CONDITIONS MODES OR REQUIRED REFERENCED FUNCTION OTHER CHANNELS FROM SURVEILLANCE ALLOWABLE SPECIFIED PER TRIP REQUIRED REQUIREMENTS VALUE CONDITIONS SYSTEM ACTION A.1 1. Reactor Vessel Water Level -1,2,3,(a) 2 B SR 3.3.7.1.1 2!528 inches Low, Level 3 SR 3.3.7.1.2 above vessel SR 3.3.7.1.5 zero SR 3.3.7.1.6 2. Drywell Pressure -High 1,2,3 *2 B SR 3.3.7.1.2
<52.5 psig SR 3.3.7.1.5 SR 3.3.7.1.6 3. Reactor Zone Exhaust 1,2,3 1 C SR 3.3.7.1.1 5 100 mRlhr Radiation
-High (a) SR 3.3.7.1.2 SR 3.3.7.1.5 SR 3.3.7.1.6 4. Refueling Floor Exhaust 1,2,3, 1 C SR 3.3.7.1.1
- 5100 mR/hr Radiation
-High (a) SR 3.3.*7.1.2 SIR 3.3.7.1.5 SR 3.3.7.1.6 5. Control Room Air Supply Dtict 1,2,3, 1 D SR 3.3.7.1.1 5270 cpm Radiation
-High (a) SR 3.3.7.1.2 above SR 3.3.7.1.3 background SR 3.3.7.1.4 I.(a) During operations with a potential for draining the reactor vessel.BFN-UNIT 1 3.3-69 BFN-NIT1 3.-69Amendment No. 234, 251, 258