ML18317A093: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
| number = ML18317A093 | | number = ML18317A093 | ||
| issue date = 11/13/2018 | | issue date = 11/13/2018 | ||
| title = | | title = COL Docs - RAI Transmittal for Vogtle Units 3 and 4 LAR 18-017 | ||
| author name = | | author name = | ||
| author affiliation = NRC | | author affiliation = NRC | ||
Line 12: | Line 12: | ||
| document type = E-Mail | | document type = E-Mail | ||
| page count = 10 | | page count = 10 | ||
| project = | |||
| stage = RAI | |||
}} | }} | ||
Line 18: | Line 20: | ||
==Subject:== | ==Subject:== | ||
RAI Transmittal for Vogtle Units 3 and 4 LAR 18-017 Attachments: 2018-11-13 Final RAI No. 1 - LAR 18-017.pdf Good Morning, By letter dated July 20, 2018, Southern Nuclear Operating Company submitted License Amendment Request (LAR) 18-017, Technical Specification Changes for Spent Fuel Pool Level - Low 2 and In-Containment Refueling Water Storage Tank (IRWST) Wide Range Level - Low Operability (LAR-18-017), to the U. S. Nuclear Regulatory Commission (NRC) for Vogtle Electric Generating Plant Units 3 and 4, Combined License Nos. NPF-91 and NPF-92 (ADAMS Accession No. | RAI Transmittal for Vogtle Units 3 and 4 LAR 18-017 Attachments: 2018-11-13 Final RAI No. 1 - LAR 18-017.pdf Good Morning, By letter dated July 20, 2018, Southern Nuclear Operating Company submitted License Amendment Request (LAR) 18-017, Technical Specification Changes for Spent Fuel Pool Level - Low 2 and In-Containment Refueling Water Storage Tank (IRWST) Wide Range Level - Low Operability (LAR-18-017), to the U. S. Nuclear Regulatory Commission (NRC) for Vogtle Electric Generating Plant Units 3 and 4, Combined License Nos. NPF-91 and NPF-92 (ADAMS Accession No. ML18201A610). The NRC staff is reviewing the request to enable the staff to reach a conclusion on the safety of the proposed changes. | ||
ML18201A610). The NRC staff is reviewing the request to enable the staff to reach a conclusion on the safety of the proposed changes. | |||
The NRC staff has identified that additional information is needed to continue the review. The staffs request for additional information (RAI) is contained in the attachment to this email. | The NRC staff has identified that additional information is needed to continue the review. The staffs request for additional information (RAI) is contained in the attachment to this email. | ||
To support the review schedule, you are requested to respond within 30 days of the date of this email. If changes are needed to the final safety analysis report, the staff requests that the RAI response include the proposed wording changes. | To support the review schedule, you are requested to respond within 30 days of the date of this email. If changes are needed to the final safety analysis report, the staff requests that the RAI response include the proposed wording changes. | ||
Line 39: | Line 40: | ||
Recipients Received: | Recipients Received: | ||
Request for Additional Information - FINAL LAR 18-017, TS Changes for Spent Fuel Pool Level - Low 2 and IRWST Wide Range Level - Low Operability Issue Date: November 13, 2018 Application Title: VEGP Units 3 and 4 - LAR 18-017 Operating Company: Southern Nuclear Operating Co. | Request for Additional Information - FINAL LAR 18-017, TS Changes for Spent Fuel Pool Level - Low 2 and IRWST Wide Range Level - Low Operability Issue Date: November 13, 2018 Application | ||
==Title:== | |||
VEGP Units 3 and 4 - LAR 18-017 Operating Company: Southern Nuclear Operating Co. | |||
Docket No. 52-025 and 52-026 Review Section: 16 - Technical Specifications 10 CFR 50.36 sets forth requirements for technical specifications to be included as part of the operating license for a nuclear power facility. In particular, 10 CFR 50.36(b) states, in part, | Docket No. 52-025 and 52-026 Review Section: 16 - Technical Specifications 10 CFR 50.36 sets forth requirements for technical specifications to be included as part of the operating license for a nuclear power facility. In particular, 10 CFR 50.36(b) states, in part, | ||
"[T]he technical specifications will be derived from the analyses and evaluation included in the safety analysis report, and amendments thereto." NUREG-2194, "Standard Technical Specifications-Westinghouse Advanced Passive 1000 (AP1000) Plants," Rev. 0, provides NRC guidance on format and content of technical specifications as one acceptable means to meet 10 CFR 50.36 requirements. | "[T]he technical specifications will be derived from the analyses and evaluation included in the safety analysis report, and amendments thereto." NUREG-2194, "Standard Technical Specifications-Westinghouse Advanced Passive 1000 (AP1000) Plants," Rev. 0, provides NRC guidance on format and content of technical specifications as one acceptable means to meet 10 CFR 50.36 requirements. | ||
Line 60: | Line 64: | ||
"UFSAR Subsections 6.3.2.2.3 and 7.3.1.2.21 describe closure of the SFS containment isolation valves on one of two channels of ESFAS IRWST Wide Range Level - Low instrumentation to prevent loss of IRWST water inventory in 2 | "UFSAR Subsections 6.3.2.2.3 and 7.3.1.2.21 describe closure of the SFS containment isolation valves on one of two channels of ESFAS IRWST Wide Range Level - Low instrumentation to prevent loss of IRWST water inventory in 2 | ||
the event of a leak in the nonsafety-related, nonseismic SFS when connected to the IRWST. This actuation can be manually blocked while the plant is in MODE 6, below the P-9 (reactor coolant average temperature (Tavg)) interlock setpoint of less than or equal to 200°F. This allows the SFS to transfer IRWST water inventory to the refueling cavity, and to perform cooling and purification of the refueling cavity. The manual block can also be used during MODE 5 so that, if required, operators can use the SFS to cool, purify, sample, or transfer water to the IRWST when the level is below the IRWST Wide Range Level - Low setpoint. IRWST Wide Range Level - Low is automatically unblocked when Tavg is above the P-9 setpoint (i.e., in MODES 1, 2, 3, and 4). The ESFAS IRWST Wide Range Level - Low instrumentation function was added in VEGP Units 3 and 4 License Amendments 100 and 99, respectively (NRC Accession No. | the event of a leak in the nonsafety-related, nonseismic SFS when connected to the IRWST. This actuation can be manually blocked while the plant is in MODE 6, below the P-9 (reactor coolant average temperature (Tavg)) interlock setpoint of less than or equal to 200°F. This allows the SFS to transfer IRWST water inventory to the refueling cavity, and to perform cooling and purification of the refueling cavity. The manual block can also be used during MODE 5 so that, if required, operators can use the SFS to cool, purify, sample, or transfer water to the IRWST when the level is below the IRWST Wide Range Level - Low setpoint. IRWST Wide Range Level - Low is automatically unblocked when Tavg is above the P-9 setpoint (i.e., in MODES 1, 2, 3, and 4). The ESFAS IRWST Wide Range Level - Low instrumentation function was added in VEGP Units 3 and 4 License Amendments 100 and 99, respectively (NRC Accession No. ML17284A066). | ||
ML17284A066). | |||
"The operability of the IRWST Wide Range Level - Low instrumentation function, and the operability of the actuated SFS containment isolation valves, support continued IRWST operability when the SFS is connected to the IRWST in MODES 1, 2, 3, and 4. Without an OPERABLE IRWST Wide Range Level - Low instrumentation function and OPERABLE SFS containment isolation valves in MODES 1, 2, 3, and 4, aligning the SFS to the IRWST would result in declaring the IRWST inoperable [because the IRWST water inventory would be vulnerable to a leak in the SFS system outside containment], and the requirements of TS 3.5.6, "In-containment Refueling Water Storage Tank (IRWST) - Operating," | "The operability of the IRWST Wide Range Level - Low instrumentation function, and the operability of the actuated SFS containment isolation valves, support continued IRWST operability when the SFS is connected to the IRWST in MODES 1, 2, 3, and 4. Without an OPERABLE IRWST Wide Range Level - Low instrumentation function and OPERABLE SFS containment isolation valves in MODES 1, 2, 3, and 4, aligning the SFS to the IRWST would result in declaring the IRWST inoperable [because the IRWST water inventory would be vulnerable to a leak in the SFS system outside containment], and the requirements of TS 3.5.6, "In-containment Refueling Water Storage Tank (IRWST) - Operating," | ||
would be applicable for determining the TS Actions required to be followed. | would be applicable for determining the TS Actions required to be followed. | ||
Line 97: | Line 100: | ||
SR 3.3.16.4 ---------------------------------NOTE------------------------------- | SR 3.3.16.4 ---------------------------------NOTE------------------------------- | ||
Only required to be met in MODE 6. | Only required to be met in MODE 6. | ||
Verify Spent Fuel Pool Cooling System containment isolation valves actuate to the isolation position on an actual or simulated actuation signal. | Verify Spent Fuel Pool Cooling System containment isolation valves actuate to the isolation position on an actual or simulated actuation signal. | ||
l 24 months The staff has the following concerns: | l 24 months The staff has the following concerns: |
Latest revision as of 16:28, 2 February 2020
ML18317A093 | |
Person / Time | |
---|---|
Site: | Vogtle ![]() |
Issue date: | 11/13/2018 |
From: | NRC |
To: | NRC/NRO/DLSE/LB4 |
References | |
Download: ML18317A093 (10) | |
Text
Vogtle PEmails From: Hoellman, Jordan Sent: Tuesday, November 13, 2018 9:39 AM To: Sparkman, Wesley A.; 'Grant, Eddie'; Humphrey, Mark Phillips Cc: Patel, Chandu; Dixon-Herrity, Jennifer; Vogtle PEmails
Subject:
RAI Transmittal for Vogtle Units 3 and 4 LAR 18-017 Attachments: 2018-11-13 Final RAI No. 1 - LAR 18-017.pdf Good Morning, By letter dated July 20, 2018, Southern Nuclear Operating Company submitted License Amendment Request (LAR)18-017, Technical Specification Changes for Spent Fuel Pool Level - Low 2 and In-Containment Refueling Water Storage Tank (IRWST) Wide Range Level - Low Operability (LAR-18-017), to the U. S. Nuclear Regulatory Commission (NRC) for Vogtle Electric Generating Plant Units 3 and 4, Combined License Nos. NPF-91 and NPF-92 (ADAMS Accession No. ML18201A610). The NRC staff is reviewing the request to enable the staff to reach a conclusion on the safety of the proposed changes.
The NRC staff has identified that additional information is needed to continue the review. The staffs request for additional information (RAI) is contained in the attachment to this email.
To support the review schedule, you are requested to respond within 30 days of the date of this email. If changes are needed to the final safety analysis report, the staff requests that the RAI response include the proposed wording changes.
If you have any questions or comments concerning this matter, you may contact me at 301-415-5481.
Sincerely, Jordan Hoellman Project Manager NRO / DLSE / LB4 U.S. Nuclear Regulatory Commission office: OWFN-08-C18 phone: (301) 415-5481 email: Jordan.Hoellman2@nrc.gov 1
Hearing Identifier: Vogtle_COL_Docs_Public Email Number: 385 Mail Envelope Properties (SN6PR0901MB2366CF9164EB472D82E76F93D5C20)
Subject:
RAI Transmittal for Vogtle Units 3 and 4 LAR 18-017 Sent Date: 11/13/2018 9:38:46 AM Received Date: 11/13/2018 9:39:02 AM From: Hoellman, Jordan Created By: Jordan.Hoellman2@nrc.gov Recipients:
"Patel, Chandu" <Chandu.Patel@nrc.gov>
Tracking Status: None "Dixon-Herrity, Jennifer" <Jennifer.Dixon-Herrity@nrc.gov>
Tracking Status: None "Vogtle PEmails" <Vogtle.PEmails@nrc.gov>
Tracking Status: None "Sparkman, Wesley A." <WASPARKM@southernco.com>
Tracking Status: None
"'Grant, Eddie'" <X2EDGRAN@SOUTHERNCO.COM>
Tracking Status: None "Humphrey, Mark Phillips" <MPHUMPHR@southernco.com>
Tracking Status: None Post Office: SN6PR0901MB2366.namprd09.prod.outlook.com Files Size Date & Time MESSAGE 1411 11/13/2018 9:39:02 AM 2018-11-13 Final RAI No. 1 - LAR 18-017.pdf 331421 Options Priority: Standard Return Notification: No Reply Requested: No Sensitivity: Normal Expiration Date:
Recipients Received:
Request for Additional Information - FINAL LAR 18-017, TS Changes for Spent Fuel Pool Level - Low 2 and IRWST Wide Range Level - Low Operability Issue Date: November 13, 2018 Application
Title:
VEGP Units 3 and 4 - LAR 18-017 Operating Company: Southern Nuclear Operating Co.
Docket No.52-025 and 52-026 Review Section: 16 - Technical Specifications 10 CFR 50.36 sets forth requirements for technical specifications to be included as part of the operating license for a nuclear power facility. In particular, 10 CFR 50.36(b) states, in part,
"[T]he technical specifications will be derived from the analyses and evaluation included in the safety analysis report, and amendments thereto." NUREG-2194, "Standard Technical Specifications-Westinghouse Advanced Passive 1000 (AP1000) Plants," Rev. 0, provides NRC guidance on format and content of technical specifications as one acceptable means to meet 10 CFR 50.36 requirements.
In LAR 18-017, "Technical Specification Changes for Spent Fuel Pool Level - Low 2 and In-Containment Refueling Water Storage Tank (IRWST) Wide Range Level - Low Operability," the licensee proposed the following changes to the VEGP Units 3 & 4 plant-specific technical specifications (TS).
x The title of TS Subsection 3.3.14 would be revised as indicated below:
"Engineered Safety Feature Actuation System (ESFAS) Refueling Cavity and Spent Fuel Pool Level Cooling System (SFS) Isolation Instrumentation" x The LCO 3.3.14 statement would be revised as indicated below:
"Three channels of ESFAS Spent Fuel Pool Level - Low 2 instrumentation The ESFAS Refueling Cavity and SFS Isolation Instrumentation channels for each Function in Table 3.3.14-1 shall be OPERABLE."
In the new Table 3.3.14-1, "Engineered Safety Feature Actuation System Instrumentation," besides a revised Applicability for the Spent Fuel Pool Level - Low 2 Function as described below, a new instrumentation Function would be added for the In-containment Refueling Water Storage Tank (IRWST) Wide Range Level - Low with two channels required to be OPERABLE in MODES 1, 2, 3, and 4.
x The LCO 3.3.14 Applicability for the Spent Fuel Pool Level - Low 2 instrumentation Function would be changed from "MODE 6" to "MODE 6 with refueling cavity and spent fuel pool volumes in communication."
x A new Note is added to the Subsection 3.3.14 Actions Table to accommodate the additional instrumentation Function , as indicated below:
"Separate condition entry is allowed for each Function."
x Subsection 3.3.14 Condition A is revised as indicated below:
"A. One Spent Fuel Pool Level - Low 2 channel inoperable. l A.1 Place channel in trip. l 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />" x Subsection 3.3.14 Condition B is revised as indicated below:
"B. Required Action and associated Completion Time of Condition A Not Met not met. OR One or more In-Containment Refueling Water Storage Tank (IRWST)
Wide Range Level - Low channels inoperable. OR Two or more Spent Fuel Pool Level - Low 2 channels inoperable. l NOTE Flow paths may be unisolated intermittently under administrative controls. B.1 Isolate the affected flow path(s). l 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> AND B.2.1 Isolate the affected flow path(s) by use of at least one closed and deactivated automatic valve, closed manual valve, blind flange, or check valve with flow through the valve secured. l 7 days OR B.2.2 Verify the affected flow path is isolated. l Once per 7 days" x New Condition C is added to Subsection 3.3.14 as indicated below:
"C. Required Action and associated Completion Time of Condition B not met. l C.1 Declare the IRWST inoperable. l Immediately" x New Subsection 3.7.13 is added to address the safety function of the SFS containment penetration flow path isolation in Mode 6 (refueling operations) with refueling cavity and spent fuel pool volumes in communication. Proposed Actions A and B state:
"A. One or more flow paths with one or more SFS containment isolation valves inoperable. l A.1 Isolate the affected flow path. l 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> AND A.2.1 Isolate the affected flow path by use of at least one closed and deactivated automatic valve, closed manual valve, blind flange, or check valve with flow through the valve secured. l 7 days OR A.2.2 Verify the affected flow path is isolated. l Once per 7 days B. Required Action and associated Completion Time not met. l B.1 Declare the IRWST inoperable. l Immediately" x New surveillance requirements (SRs) are added to Subsections 3.5.7 and 3.5.8, to verify the SFS containment isolation valves are closed in support of the IRWST minimum required water volume in Mode 5, and the IRWST and refueling cavity minimum required combined water volume in Mode 6 with refueling cavity and spent fuel pool volumes not in communication, respectively.
In the LAR, the licensee states:
"UFSAR Subsections 6.3.2.2.3 and 7.3.1.2.21 describe closure of the SFS containment isolation valves on one of two channels of ESFAS IRWST Wide Range Level - Low instrumentation to prevent loss of IRWST water inventory in 2
the event of a leak in the nonsafety-related, nonseismic SFS when connected to the IRWST. This actuation can be manually blocked while the plant is in MODE 6, below the P-9 (reactor coolant average temperature (Tavg)) interlock setpoint of less than or equal to 200°F. This allows the SFS to transfer IRWST water inventory to the refueling cavity, and to perform cooling and purification of the refueling cavity. The manual block can also be used during MODE 5 so that, if required, operators can use the SFS to cool, purify, sample, or transfer water to the IRWST when the level is below the IRWST Wide Range Level - Low setpoint. IRWST Wide Range Level - Low is automatically unblocked when Tavg is above the P-9 setpoint (i.e., in MODES 1, 2, 3, and 4). The ESFAS IRWST Wide Range Level - Low instrumentation function was added in VEGP Units 3 and 4 License Amendments 100 and 99, respectively (NRC Accession No. ML17284A066).
"The operability of the IRWST Wide Range Level - Low instrumentation function, and the operability of the actuated SFS containment isolation valves, support continued IRWST operability when the SFS is connected to the IRWST in MODES 1, 2, 3, and 4. Without an OPERABLE IRWST Wide Range Level - Low instrumentation function and OPERABLE SFS containment isolation valves in MODES 1, 2, 3, and 4, aligning the SFS to the IRWST would result in declaring the IRWST inoperable [because the IRWST water inventory would be vulnerable to a leak in the SFS system outside containment], and the requirements of TS 3.5.6, "In-containment Refueling Water Storage Tank (IRWST) - Operating,"
would be applicable for determining the TS Actions required to be followed.
"In addition, without the SFS containment isolation valves being closed in MODE 5 and in MODE 6 with refueling cavity and spent fuel pool volumes not in communication, aligning the SFS to the IRWST would also result in declaring the IRWST inoperable, and the requirements of TS 3.5.7, "In-containment Refueling Water Storage Tank (IRWST) - Shutdown, MODE 5," or TS 3.5.8, "In-containment Refueling Water Storage Tank (IRWST) - Shutdown, MODE 6,"
would be applicable for determining the TS Actions required to be followed.
"The Refueling Cavity and SFS Isolation on the IRWST Wide Range Level - Low instrumentation function is a support system required by the definition of operability for the IRWST. However, it is desired to have separate TS requirements for this support system, similar to other ESFAS automatic actuation functions. This is desired to provide greater visibility and explicit guidance to the operations staff. To support this, changes are proposed to TS 3.3.14.
"Similarly, explicit operability requirements in the form of explicit Surveillance Requirements (SRs) are proposed for TS 3.5.7 in MODE 5 and TS 3.5.8 in MODE 6 with refueling cavity and spent fuel pool volumes not in communication to support continued IRWST operability. These changes provide clear requirements for the following:
- 1. Requiring the IRWST Wide Range Level - Low instrumentation function to be OPERABLE in MODES 1, 2, 3, and 4, and
- 2. Requiring the SFS containment isolation valves to be verified closed, and only opened intermittently under administrative controls, in MODE 5 and in 3
MODE 6 with refueling cavity and spent fuel pool volumes not in communication.
"These changes provide explicit operability requirements while allowing flexibility in the use of the SFS to cool, purify, sample, or transfer water to and from the IRWST and refueling cavity, while maintaining operability of the IRWST during these times."
Based on the above information, the staff understands that both instrumentation functions listed in TS Subsection 3.3.14 are only used to initiate isolation of the SFS (outside containment) from the refueling cavity and the IRWST (both inside containment) when the SFS is operating to cool and purify water in the refueling cavity or IRWST, or transfer water inventory between them, in the respective specified Modes to support normal plant operations or refueling operations. The licensee is requested to consider the below Sub-questions 1, 2, 3, and 4, which provide suggestions to improve the clarity of the proposed changes to TS Subsections 3.3.14, 3.5.7, 3.5.8 and 3.7.13, and associated Bases; and also to TS Subsection 3.3.16 and associated Bases.
- 1. The proposed revised title of Subsection 3.3.14 seems imprecise because this LCO just requires operability of the two IRWST Wide Range Level - Low channels in MODES 1, 2, 3, and 4; and the three Spent Fuel Pool Level - Low 2 channels in MODE 6 with the refueling cavity and the spent fuel pool volumes in communication. Both of these ESFAS instrument Functions cause SFS CIVs SFS-PL-V035 (outside), SFS-PL-V034 (inside), and SFS-PL-V038 (outside) to close to prevent a loss of IRWST-refueling cavity water volume should the SFS system develop a leak. In keeping with other Section 3.3 subsections, the title should reflect the containment isolation purpose of the instrumentation functions; the staff suggests, ESFAS Spent Fuel Pool Cooling System (SFS) Containment Isolation Instrumentation; also, the LCO 3.3.14 statement should be consistent with the title: The ESFAS SFS containment isolation instrumentation channels for each Function in Table 3.3.14-1 shall be OPERABLE. Other possible titles are (i) for brevity, "ESFAS SFS Isolation Instrumentation"; and (ii) "ESFAS IRWST and Refueling Cavity SFS Isolation Instrumentation" to include the IRWST as well as the refueling cavity. (The title should define acronyms as needed.) And for any of these candidates, the LCO can say: "The SFS isolation instrumentation channels for each Function in Table 3.3.14-1 shall be OPERABLE.
The licensee is requested to consider making these clarifications.
- 2. The Subsection 3.3.14 Actions for Function 1, Spent Fuel Pool Level - Low 2, apply in MODE 6 with refueling cavity and spent fuel pool volumes in communication. The staff understands that this means that SFP level and fuel transfer canal level match the refueling cavity level, which if irradiated fuel is being moved, implies a refueling cavity water level of 23 ft above the top of the reactor vessel flange.
In Condition A (One Spent Fuel Pool Level - Low 2 channel inoperable.), placing the inoperable channel in trip places the coincidence logic in a 1 out of 2 configuration; but if the channel is still inoperable but not placed in trip within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, the first condition of Condition B (Required Action and associated Completion Time of Condition A Not Met not met.) would apply. Assuming this inoperable channel is unable to produce a trip signal, the staff understands that the remaining two channels are in a 2 out of 2 coincidence logic configuration, which means Function 1 could not withstand a single failure of an operable channel, which would prevent generation of an isolation signal to the valves. This 4
constitutes a loss of the automatic SFS containment penetration flow path isolation function, which would require manually closing the supported CIVs or otherwise isolating the two SFS containment penetration flow paths, within a reasonable but relatively short completion time. The staff concludes that performing Required Actions B.1 and B.2 would accomplish this manual isolation.
Assuming Required Action A.1 is met, if one of the remaining two channels become inoperable, the third condition of Condition B (Two or more Spent Fuel Pool Level - Low 2 channels inoperable.) would apply. Placing the second inoperable channel in bypass is not an option because then Function 1 could not withstand a single failure of the remaining operable channel, which would prevent generation of an isolation signal to the valves; in addition, placing one of the remaining two channels in trip would generate an isolation signal to the valves. Although this would preserve the combined refueling cavity and IRWST water inventory, it would block direct cooling and filtering of this combined inventory using the SFS. Therefore, Action B appropriately does not include placing additional channels in bypass or trip, but as already noted, requires manually closing the supported CIVs or otherwise isolating the two SFS containment penetration flow paths, within a reasonable but relatively short Completion Time of 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. The staff notes that the LAR-18-017 markup of Required Actions B.1 and B.2.1 of Subsection 3.3.14 mistakenly deletes the (s) from flow path(s); the staff understands that (i) there are just two SFS containment penetration flow paths, and this should be explained in the Bases; and (ii) separate condition entry is not specified for each flow path. Therefore, to be consistent with the guidance of plant-specific TS Example 1.3-4, the (s) would need to be retained. However, the staff also notes that since the two SFS isolation instrumentation functions support the coincidence logic in each of the ESF logic divisions that actuate closure of the three SFS CIVs to isolate both SFS containment penetration flow paths, the licensee is requested to consider replacing the phrase isolate the affected flow path(s) with isolate both SFS containment penetration flow paths in Required Actions B.1 and B.2.1, and replace Verify the affected flow path is isolated with Verify both SFS containment penetration flow paths are isolated in Required Action B.2.2.
In the very unlikely event that a Required Action and associated Completion Time of Condition B is not met, Action C would apply. Since the required water volume of the IRWST and refueling cavity would not be ensured were the SFS to develop a leak, Required Action C.1 conservatively requires declaring the IRWST inoperable, which would immediately lead to entering Subsection 3.5.8, Condition F. However, since the Applicability of the Spent Fuel Pool Level - Low 2 ESFAS Function can be exited by closing one or both ends of the fuel transfer tube, thereby ceasing communication between the water volumes of the spent fuel pool and the refueling cavity, the licensee is requested to consider adding this measure as alternative Required Action C.2. (The staff acknowledges that exiting the LCO's Applicability is always an option, but it is unclear how this would apply given the required action to declare the IRWST inoperable, which leads to 3.5.8 Action F.) The associated Bases should explain whether this action would also (by itself) maintain the required combined water inventory of the refueling cavity and IRWST. In addition, for the Spent Fuel Pool Level - Low 2 Function, were this alternative action to be taken, proposed SR 3.5.8.3 (Verify SFS CIVs are closed.) would apply according to surveillance column Note 2 (Only required to be met with the refueling cavity and spent fuel pool volumes not in communication.), but would not be met. With LCO 3.5.8 not met because SR 3.5.8.3 is not met, entry into Action F would also be required. This is the same result as declaring the IRWST inoperable by proposed Required Action C.1 of Subsection 3.3.14. The licensee is requested to explain whether irradiated fuel movement in containment and irradiated fuel 5
movement in, and transfer to, the spent fuel transfer canal and spent fuel pool can continue provided the refueling cavity water level is 23 ft above the top of the reactor vessel flange (as required by Subsection 3.5.8 Required Action F.1), even though the SFS containment penetration flow paths are not isolated nor capable of being automatically isolated on a Spent Fuel Pool Level - Low 2 Function generated ESF actuation signal to close the three SFS CIVs. To meet Required Action F.2, the staff understands that loading a fuel assembly in the reactor vessel would not be allowed because that would constitute a positive reactivity addition to the core.
- 3. The Subsection 3.7.13 Actions table Note 2 could be stated more clearly by inserting the phrase containment penetration so that it says: 2. Separate condition entry is allowed for each SFS containment penetration flow path. In addition, Condition A could be stated more clearly as follows: A. One or both penetration flow paths with one or more SFS containment isolation valves inoperable. The licensee is requested to consider making these clarifications.
- 4. Subsection 3.7.13, SR 3.7.13.1 states:
SR 3.7.13.1 For SFS containment isolation valves required to be OPERABLE, the following SRs are applicable:
SR 3.6.3.4 SR 3.6.3.5 l In accordance with applicable SRs.
Subsection 3.6.3, SR 3.6.3.4 states:
SR 3.6.3.4 Verify the isolation time of each automatic power operated containment isolation valve is within limits.
l In accordance with the Inservice Testing Program Subsection 3.6.3, SR 3.6.3.5 states:
SR 3.6.3.5 Verify each automatic containment isolation valve that is not locked, sealed or otherwise secured in position, actuates to the isolation position on an actual or simulated actuation signal.
l 24 months 6
NUREG-2194, STS Subsection 3.3.16, SR 3.3.16.4 states:
SR 3.3.16.4 ---------------------------------NOTE-------------------------------
Only required to be met in MODE 6.
Verify Spent Fuel Pool Cooling System containment isolation valves actuate to the isolation position on an actual or simulated actuation signal.
l 24 months The staff has the following concerns:
- a. Since the above two SRs of Subsection 3.6.3 apply in MODES 1, 2, 3, and 4, they do not automatically support the LCO 3.7.13 MODE 6 operability requirement for the two SFS return line CIVs, SFS-PL-V035 (outside) and SFS-PL-V034 (inside), and the one SFS supply line CIV, SFS-PL-V038 (outside); for improved clarity and ease of use, the staff requests the licensee to consider revising proposed Subsection 3.7.13 to state the two SRs explicitly, as follows (The staff also observes that STS Subsection SRs during Mode 5 and 6, usually refer to SRs in the same TS Section, not in a different TS Section):
SR 3.7.13.1 Verify the isolation time of each SFS automatic power operated containment isolation valve is within limits.
l In accordance with the Inservice Testing Program SR 3.7.13.2 Verify each SFS automatic containment isolation valve that is not locked, sealed or otherwise secured in position, actuates to the isolation position on an actual or simulated actuation signal.
l 24 months
- b. In addition, STS SR 3.3.16.4 may be removed, since the addition of Subsection 3.7.13 and the suggested SR 3.7.13.2 obviate the original need for it in Subsection 3.3.16.
Therefore, the licensee is requested to change (i) proposed Subsection 3.7.13 by replacing the proposed SR 3.7.13.1 and associated Bases with the above explicit SRs and suitable associated Bases; and (ii) existing Subsection 3.3.16 by deleting SR 3.3.16.4 and associated Bases.
7
The licensee is reminded to update the proposed changes to the Bases that were provided in the LAR-18-017 Enclosure 3 to reflect the disposition and resolution of the above issues, as stated in Sub-questions 1, 2, 3, and 4.
8