ML19305C723: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot change)
(StriderTol Bot change)
 
Line 18: Line 18:
=Text=
=Text=
{{#Wiki_filter:.
{{#Wiki_filter:.
U,,., .
U,,.,.
ENCLOSURE 1 PROPOSED CllANCES TO SEQUOYAlf UNIT 1 TEClINICAL SPECIFICATIONS 8003310 g
ENCLOSURE 1 PROPOSED CllANCES TO SEQUOYAlf UNIT 1 TEClINICAL SPECIFICATIONS 8003310 g


r M                                                                     TABLE 2.2-1 (Continued)                       .
r M
S Q;                                                   REAC10R TRIP SYSTEM INSTRUMENTATION TRIP SETPOINTS
TABLE 2.2-1 (Continued)
[       FUNCTIONAL UNIT                                                           TRIP SETPOINT                   ALLOWABLE VALUES
SQ; REAC10R TRIP SYSTEM INSTRUMENTATION TRIP SETPOINTS
                                =
[
                                -4     :21.           Turbine Impulse Chamber Pressure -                         < 10% Turbine Impulse           5 11% Turbine Impulse                 '
FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES
                                -                      (P-13) Input' to Low Power Reactor Trips                   Pressure Equivalent             Pressure Equivalent Block P-7 22'           Power Range Neutron Flux - (P-8) Input                     < 35% of RATED                 5 36% of RATED to Low Reactor Coolant Loop Flow                           IliERMAL POWER                   THERMAL POWER Reactor Trip
=
: 23. ' Power Range Neavron Flux - (P-10) -                                 > 10% of RATED                 > 9% of RATED Enable block <>T Source, Intermediate,                     THERMAL POWER                   THERMAL POWER
-4
                                ,                  .and Power Range (low setpoint) reactor                                                                                               -
:21.
,                              4                      Trips                     ,
Turbine Impulse Chamber Pressure -
: 24.           Reactor Trip P-4                                           Not Applicable                 Not Applicable i
< 10% Turbine Impulse 5 11% Turbine Impulse (P-13) Input' to Low Power Reactor Trips Pressure Equivalent Pressure Equivalent Block P-7 22' Power Range Neutron Flux - (P-8) Input
NOTATION
< 35% of RATED 5 36% of RATED to Low Reactor Coolant Loop Flow IliERMAL POWER THERMAL POWER Reactor Trip
'                                                                                          I
: 23. ' Power Range Neavron Flux - (P-10) -
* b       I NOTE 1:               Overtemperature aT (             ) 5 AT, (Ky -K                              )-T'] + K3 (P-P') - f j(aI)}
> 10% of RATED
1+t jS                          2 (1 + 12 3
> 9% of RATED Enable block <>T Source, Intermediate, THERMAL POWER THERMAL POWER
S )[T(
.and Power Range (low setpoint) reactor 4
1+1 4S where:      j   f   = Lag compensator on measured AT                                                                     ,
Trips 24.
]                                                                         I j     = Time constants utilized in the lag compensator for AT3 *l = 2 secs.
Reactor Trip P-4 Not Applicable Not Applicable i
AT,       = Indicated AT at RATED THERMAL POWER K
NOTATION I
3    $ 1.14 K
b I
2
NOTE 1:
                                                                                    = 0.009 1
Overtemperature aT (
l l
) 5 AT, (Ky 2 (1 + 12 )[T(
)-T'] + K (P-P') - f (aI)}
-K 3
j 1+t S S
1+1 S j
3 4
f
= Lag compensator on measured AT where:
j
]
j
= Time constants utilized in the lag compensator for AT *l = 2 secs.
I 3
AT,
= Indicated AT at RATED THERMAL POWER K
$ 1.14 l
3 K
= 0.009 2
1 l
l


TABLE 3.3-13 (Continued)
TABLE 3.3-13 (Continued)
_ TABLE NOTATION At all times.
_ TABLE NOTATION At all times.
During waste gas disposal system operation.
During waste gas disposal system operation.
        *** During shield building exhaust system operation.
*** During shield building exhaust system operation.
ACTION 32 -     With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, the contents of the tank (s) may be released to the environment for up to 14 days provided that prior to initiating the release:
ACTION 32 -
: a. At least two independent samples of the tank's contents are analyzed, and
With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, the contents of the tank (s) may be released to the environment for up to 14 days provided that prior to initiating the release:
: b. At least two technically qualified members of the Facility Staff independently verify the release rate calculations and discharge vaM lineup; Otherwise, suspend release of radioactive effluents via this pathway.
At least two independent samples of the tank's contents a.
ACTION 33 -     With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via this pathway may continue for up to 30 days provided the flow rate is estimated at least once per 4 hours.
are analyzed, and b.
ACTION 34 -     With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via this pathway may continue for up to 30 days provided grab samples are taken at least once per 8 hours and these samples are analyzed for noble gas gross activity within 24 hours.
At least two technically qualified members of the Facility Staff independently verify the release rate calculations and discharge vaM lineup; Otherwise, suspend release of radioactive effluents via this pathway.
ACTION 35 -     With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, operation of this waste gas disposal system may continue for up to 7 days provided grab
ACTION 33 -
                        -samples are collected at least once per 4 hours and analyzed within the following 4 hours. With the hydrogen and oxygen-monitors inoperable, be in at least HOT STANDBY within 6 hours.
With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via this pathway may continue for up to 30 days provided the flow rate is estimated at least once per 4 hours.
ACTION 36 -     With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via the af fected pathway may continue for up to 30 days provided that within 4 hours after the channel has been declared' inoperable samples are continuously collected with auxiliary campling equipment as required in Table 4.11-2.
ACTION 34 -
SEQUOYAH - UNIT 1                       3/4 3-77
With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via this pathway may continue for up to 30 days provided grab samples are taken at least once per 8 hours and these samples are analyzed for noble gas gross activity within 24 hours.
ACTION 35 -
With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, operation of this waste gas disposal system may continue for up to 7 days provided grab
-samples are collected at least once per 4 hours and analyzed within the following 4 hours. With the hydrogen and oxygen-monitors inoperable, be in at least HOT STANDBY within 6 hours.
ACTION 36 -
With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via the af fected pathway may continue for up to 30 days provided that within 4 hours after the channel has been declared' inoperable samples are continuously collected with auxiliary campling equipment as required in Table 4.11-2.
SEQUOYAH - UNIT 1 3/4 3-77


PLANT SYSTEMS AUXILIARY FEEDWATER SYSTEM LIMITING CONDITION FOR OPERATION
PLANT SYSTEMS AUXILIARY FEEDWATER SYSTEM LIMITING CONDITION FOR OPERATION
: 3. 7.1. 2 At least three independent steam generator auxiliary feedwater pumps and associated flow paths shall be OPERABLE with:                                       '
: 3. 7.1. 2 At least three independent steam generator auxiliary feedwater pumps and associated flow paths shall be OPERABLE with:
a.
Two feedwater pumps, each capable of being powered from separate a.
Two feedwater pumps, each capable of being powered from separate shutdown boards, and
shutdown boards, and b.
: b. Ona feedwater pump capable of being powered from an OPERABLE steam supply system.
Ona feedwater pump capable of being powered from an OPERABLE steam supply system.
APPLICABILITY: MODES 1, 2 and 3.
APPLICABILITY: MODES 1, 2 and 3.
ACTION:
ACTION:
: a. Uith one auxiliary feedwater pump inoperabic, restore at 1 cast three auxiliary feeduater pumps (two capabic of being poucred from separate shutdoun boards and one capabic of being poucred by an OPERA 3LC steam supply system) to OPERABLE status within 72 hours or he in at least l!OT STA: DUY within the next 6 hours and in !!OT SliUTD0tm within the following 6 hours.
Uith one auxiliary feedwater pump inoperabic, restore at 1 cast three a.
: b. The provisions of Specification 3.0.4 are not applicabic.
auxiliary feeduater pumps (two capabic of being poucred from separate shutdoun boards and one capabic of being poucred by an OPERA 3LC steam supply system) to OPERABLE status within 72 hours or he in at least l!OT STA: DUY within the next 6 hours and in !!OT SliUTD0tm within the following 6 hours.
b.
The provisions of Specification 3.0.4 are not applicabic.
SURVEILLANCE RE0VIREMENTS
SURVEILLANCE RE0VIREMENTS
: 4. 7.1. 2 Eacn auxiliary feedwater pump shall be demonstrated OPERABLE:
: 4. 7.1. 2 Eacn auxiliary feedwater pump shall be demonstrated OPERABLE:
: a. At least once per 31 days by:
At least once per 31 days by:
: 1. Verifying that each motor driven pump develops a differential pressure of greater than or equal to 1397 psid on recirculation flow.                                                                       t
a.
: 2. Verifying that the steam turbine driven pump develops a differen-           !
1.
tial pressure of greater than or equal to 1183 psid on recircula, tion flow when the secondary steam supply pressure is greater than 842 psig.
Verifying that each motor driven pump develops a differential pressure of greater than or equal to 1397 psid on recirculation flow.
: 3. Verifying that each ron-automatic valve in the flow path that is not locked, sealed, or otherwise secured in position, is in its correct position, and 4
t 2.
Verifying that the steam turbine driven pump develops a differen-tial pressure of greater than or equal to 1183 psid on recircula, tion flow when the secondary steam supply pressure is greater than 842 psig.
3.
Verifying that each ron-automatic valve in the flow path that is not locked, sealed, or otherwise secured in position, is in its correct position, and 4
Verifying that each automatic control valve in the flow path is OPERABLE whenever the auxiliary feedwater system is placed in automatic control or when above 10% of RATED THERMAL POWER.
Verifying that each automatic control valve in the flow path is OPERABLE whenever the auxiliary feedwater system is placed in automatic control or when above 10% of RATED THERMAL POWER.
SEQUOYAH - UNIT 1                           3/4 7-5                                             !
SEQUOYAH - UNIT 1 3/4 7-5 l
l l


3/4.9 REFUELING OPERATIONS 3/4.9.1 BORON CONCENTRATION LIMITING CONDITION FOR OPERATION 3.9.1     With the reactor vessel head unbolted or removed, the boron concentration of all filled portions of the Reactor Coolant System and the refueling canal shall be maintained uniform and sufficient to ensure that the more restrictive of the following reactivity conditions is met:
3/4.9 REFUELING OPERATIONS 3/4.9.1 BORON CONCENTRATION LIMITING CONDITION FOR OPERATION 3.9.1 With the reactor vessel head unbolted or removed, the boron concentration of all filled portions of the Reactor Coolant System and the refueling canal shall be maintained uniform and sufficient to ensure that the more restrictive of the following reactivity conditions is met:
: a. Either a K eff f 0.95 or less, which includes a 1% delta k/k conser-vative allowance for uncertainties, or
a.
: b. A boron concentration of greater than or equal to 2000 ppm, which includes a 50 ppm conservative allowance for uncertainties.
Either a K f 0.95 or less, which includes a 1% delta k/k conser-eff vative allowance for uncertainties, or b.
A boron concentration of greater than or equal to 2000 ppm, which includes a 50 ppm conservative allowance for uncertainties.
APPLICABILITY: MODE 6*
APPLICABILITY: MODE 6*
ACTION:
ACTION:
With the requirements of the above specification not satisfied, immediately suspend all operations involving CORE ALTERATIONS or positive reactivity changes and initiate and continue boration at greater than or equal to 10 gpm of a solution containing 20,000 ppm boron or its equivalent until K         is eff reduced to less than or equal to 0.95 or the boron concentration is restored to greater than or equal to 2000 ppm, whichever is the more restrictive. The provisions of Specification 3.0.3 are not applicable.
With the requirements of the above specification not satisfied, immediately suspend all operations involving CORE ALTERATIONS or positive reactivity changes and initiate and continue boration at greater than or equal to 10 gpm of a solution containing 20,000 ppm boron or its equivalent until K is eff reduced to less than or equal to 0.95 or the boron concentration is restored to greater than or equal to 2000 ppm, whichever is the more restrictive.
SURVEILLANCE RE0VIREMENTS 4.9.1.1 The more restrictive of-the above two reactivity conditions shall be determined prior to:             ,
The provisions of Specification 3.0.3 are not applicable.
: a. Removing or unbolting the reactor vessel head, and
SURVEILLANCE RE0VIREMENTS 4.9.1.1 The more restrictive of-the above two reactivity conditions shall be determined prior to:
: b. Withdrawal of any full length control rod in excess of 3 feet from its fully inserted position within the reactor pressure vessel.
a.
Removing or unbolting the reactor vessel head, and b.
Withdrawal of any full length control rod in excess of 3 feet from its fully inserted position within the reactor pressure vessel.
: 4. 9.1. 2 The boron concentration of the reactor coolant system and the refueling canal shall be determined by chemical analysis at least once per 72 hours.
: 4. 9.1. 2 The boron concentration of the reactor coolant system and the refueling canal shall be determined by chemical analysis at least once per 72 hours.
        ^Ihe reactor snall be maintained in MODE 6 wherever the reactor vessel head is unbolted or removed and fuel is in the reactor vessel.                         -
^Ihe reactor snall be maintained in MODE 6 wherever the reactor vessel head is unbolted or removed and fuel is in the reactor vessel.
i
i
~
~
SEQUOYAH - UNIT 1                       3/4 9-1
SEQUOYAH - UNIT 1 3/4 9-1


REFUELit.G OPERATIONS SUhVEILLA!!CE REnUIRE"E!;TS (Continued) 4.9.1.3 One of the following valve conbinationn shall be verifled clor,ed under administrative control at 1 cast once per 72 hours:
REFUELit.G OPERATIONS SUhVEILLA!!CE REnUIRE"E!;TS (Continued) 4.9.1.3 One of the following valve conbinationn shall be verifled clor,ed under administrative control at 1 cast once per 72 hours:
Conbination A   Conbination B     Combination C Combination D
Conbination A Conbination B Combination C Combination D
: a. 1-31-536     a. 1-81-336       a. 1-81-536   a. 1-31-536
: a. 1-31-536
: b. 1-62-922     b. 1-62-922       b. 1-62-907   b. 1-62-907
: a. 1-81-336
: c. 1-62-916     c. 1-62-916       c. 1-62-914   c. 1-62-914
: a. 1-81-536
: d. 1-62-933     d. 1-62-940       d. 1-62-921   d. 1-62-921
: a. 1-31-536
: c. 1-62-696       c. 1-62-933   c. 1-62-940
: b. 1-62-922
: f. 1-62-929                       f. 1-62-696
: b. 1-62-922
: g. 1-62-932                       n. 1-62-929
: b. 1-62-907
: h. 1-FCV-62-128                   h. 1-62-932
: b. 1-62-907
: c. 1-62-916
: c. 1-62-916 c.
1-62-914
: c. 1-62-914
: d. 1-62-933
: d. 1-62-940
: d. 1-62-921
: d. 1-62-921
: c. 1-62-696
: c. 1-62-933
: c. 1-62-940
: f. 1-62-929
: f. 1-62-696
: g. 1-62-932
: n. 1-62-929
: h. 1-FCV-62-128
: h. 1-62-932
: 1. 1-FCV-62-128 SEQUOYAll - U 'IT 1 3/4 9-la
: 1. 1-FCV-62-128 SEQUOYAll - U 'IT 1 3/4 9-la


SPECIAL TEST EXCEPTIONS 3/4.10.5 POSITION INDICATION SYSTEM - SHUTDOWN 1
SPECIAL TEST EXCEPTIONS 3/4.10.5 POSITION INDICATION SYSTEM - SHUTDOWN 1
LIMITING CONDITION FOR OPERATION 3.10.5 The limitations of Specification 3.1.3.3 may be suspended during the performance of individual full length (shutdown and control) rod drop time measurements provided;
LIMITING CONDITION FOR OPERATION 3.10.5 The limitations of Specification 3.1.3.3 may be suspended during the performance of individual full length (shutdown and control) rod drop time measurements provided; a.
: a. Only one shutdown or control bank is withdrawn from the fully inserted position at a time, and
Only one shutdown or control bank is withdrawn from the fully inserted position at a time, and b.
: b. The rod position indicator is OPERABLE during the withdrawal of the rods.*
The rod position indicator is OPERABLE during the withdrawal of the rods.*
APPLICABILITY: MODES 3, 4 and 5 during performance of rod drop time measurements.
APPLICABILITY: MODES 3, 4 and 5 during performance of rod drop time measurements.
ACTION:
ACTION:
With the position indication system inoperable, or more than one bank of rods withdrawn, immediately open the reactor trip breakers.
With the position indication system inoperable, or more than one bank of rods withdrawn, immediately open the reactor trip breakers.
SURVEILLANCE REOUIREMENTS 4.10.5 The above required rod position indication systems shall be determined to be OPERABLE within 24 hours prior to the start of and at least once per 24 hours thereafter during rod drop time measurements by verifying the demand position indication system and the rod position indication systems agree:
SURVEILLANCE REOUIREMENTS 4.10.5 The above required rod position indication systems shall be determined to be OPERABLE within 24 hours prior to the start of and at least once per 24 hours thereafter during rod drop time measurements by verifying the demand position indication system and the rod position indication systems agree:
: a. Within 12 steps when the rods are stationary, and
a.
: b. Within 24 steps during rod motion.
Within 12 steps when the rods are stationary, and b.
Within 24 steps during rod motion.
: This reqeirement is not applicable during the initial calibration of the rod position indication system provided (1) K,ff is maintained less than.or equal to 0.95, and (2) only one shutdown or control bank is withdrawn.from the fully inserted position at one time.
: This reqeirement is not applicable during the initial calibration of the rod position indication system provided (1) K,ff is maintained less than.or equal to 0.95, and (2) only one shutdown or control bank is withdrawn.from the fully inserted position at one time.
SEQUOYAH - UNIT 1                     3/4 10-5
SEQUOYAH - UNIT 1 3/4 10-5


3/4.11 RADIOACTIVE EFFLUENTS
3/4.11 RADIOACTIVE EFFLUENTS
        - 3/4.11.1 LIOUID EFFLUENTS CONCENTRATION LIMITING CONDITION FOR OPERATION 3.11.1.1     The concentration of radioactive material released from the site (see Figure 5.1-1) shall be limited to the concentrations specified in 10 CFR Part 20, Appendix B, Table II, Column 2 for radionuclides other than dissolved or entrained noble gases. For dissolved gr entrained noble gises, the concentration shall be limited to 2 x 10       microcuries/ml total activity.
- 3/4.11.1 LIOUID EFFLUENTS CONCENTRATION LIMITING CONDITION FOR OPERATION 3.11.1.1 The concentration of radioactive material released from the site (see Figure 5.1-1) shall be limited to the concentrations specified in 10 CFR Part 20, Appendix B, Table II, Column 2 for radionuclides other than dissolved or entrained noble gases. For dissolved gr entrained noble gises, the concentration shall be limited to 2 x 10 microcuries/ml total activity.
APPLICABILITY: At all times.
APPLICABILITY: At all times.
ACTION:
ACTION:
With the concentration of radioactive material released from the site exceeding the above limits, immediately restore the concentration to within the above limits.
With the concentration of radioactive material released from the site exceeding the above limits, immediately restore the concentration to within the above limits.
SURVEILLANCE REOUIREMENTS 4.11.1.1.1   The radioactivity content of each batch of radioactive liquid waste from the radwaste system tanks shall be determined prior to release by sampling and analysis in accordance with Table 4.11-1. The results of pre-release analyses shall be used with the calculational metods in the ODCl! to assure that the concentration at the point of release is maintained within the limits of Specification 3.11.1.1.
SURVEILLANCE REOUIREMENTS 4.11.1.1.1 The radioactivity content of each batch of radioactive liquid waste from the radwaste system tanks shall be determined prior to release by sampling and analysis in accordance with Table 4.11-1. The results of pre-release analyses shall be used with the calculational metods in the ODCl! to assure that the concentration at the point of release is maintained within the limits of Specification 3.11.1.1.
4.11.1.1.2 Post-release analyses of samples composited from batch releases shall be performed in accordance with Table 4.11-1.       The results of the previous post-release analyses shall be used with the calculational methods in the 00CM to assure that the co.ncentrations at the point of release were maintained within the limits of Specification 3.11.1.1.
4.11.1.1.2 Post-release analyses of samples composited from batch releases shall be performed in accordance with Table 4.11-1.
4.11.1.1.3     The radioactivity concentration of liquids discharged from continuous release points shall be determined by collection and analysis of samples in accordance with Table 4.11-1.     The results of the analyses shall be used with the calculational methods in the ODCM to assure that the concentrations at the point of release are maintained within the limits of Specification 3.11.1.1.
The results of the previous post-release analyses shall be used with the calculational methods in the 00CM to assure that the co.ncentrations at the point of release were maintained within the limits of Specification 3.11.1.1.
4.11.1.1.3 The radioactivity concentration of liquids discharged from continuous release points shall be determined by collection and analysis of samples in accordance with Table 4.11-1.
The results of the analyses shall be used with the calculational methods in the ODCM to assure that the concentrations at the point of release are maintained within the limits of Specification 3.11.1.1.
l
l
        -SEQUOYAH - UNIT 1-                     3/4 11-1 I
-SEQUOYAH - UNIT 1-3/4 11-1 I


6 TABLE 4.11-1 RADI0 ACTIVE LIQUID WASTE SAMPtit4G AND ANALYSIS PROGRAM                                                                                   ,
6 TABLE 4.11-1 RADI0 ACTIVE LIQUID WASTE SAMPtit4G AND ANALYSIS PROGRAM Minimum Lower Limit of Liquid Release Sampling Analysis Type of Activity Dctection{LLD)
Minimum                                                                       Lower Limit of Liquid Release       Sampling               Analysis                                 Type of Activity Type             Frequency               F 9quency                                             Analysis               Dctection{LLD)
Type Frequency F 9quency Analysis (pCi/ml)
(pCi/ml)
A. Batch Waste P
A. Batch Waste             P                               P Release-         Each Batch             Each Gatch                               Principa                                       ~7 5x10 Radvaste                                                                          Emitters} Gamma
P
}                       Systen Tankad I-131                                     1x10
~7 Release-Each Batch Each Gatch Principa 5x10 Emitters} Gamma Radvaste
                                                                                                                                                          -6 h Waste Con-densate               P                             M                           Dissolved and                             1x10
}
                                                                                                                                                          -5
Systen Tankad
                      , Tanks (3)       One Batch /M                                                     Entrained Gases
-6 I-131 1x10 h Waste Con-
: 2. Cask Decon.                                                                         (Gamma emitters) tamination Tank P                             M                           11 - 3                                   1x10'O
-5 densate P
: 3. Laundry           Each' Batch           Composite b                                                                                _j Tanks (2)                                                                         Gross Alpha                               1x10                                 '
M Dissolved and 1x10
: 4. Chemical j                       Drain Tank                                                                                                                       -6 P-32                                     lx10                                 ;
, Tanks (3)
;                '5. Monitor Tank 6.-Distillate                                                                                                                                                           '
One Batch /M Entrained Gases
Tanks (2)             P                             Q           b Sr-89, Sr-90                             5x10'8 Each Batch             Composite
: 2. Cask Decon.
: 7. Condensate                                                                                                                           -6 l                     Demineralizer                                                                       Fe-55                                     1x10 Waste Evaporator Blowdown
(Gamma emitters) tamination Tank P
.,                  . Tank (1) l W
M 11 - 3 1x10'O b
G l
: 3. Laundry Each Batch Composite
SEQUOYAH - UllIT 1                                 3/4 11-2
_j Tanks (2)
                                                                                                                                                                        .-.y   v-n 9
Gross Alpha 1x10
: 4. Chemical j
Drain Tank
-6 P-32 lx10
'5. Monitor Tank 6.-Distillate Tanks (2)
P Q
Sr-89, Sr-90 5x10'8 b
Each Batch Composite
: 7. Condensate
-6 l
Demineralizer Fe-55 1x10 Waste Evaporator Blowdown
. Tank (1) l W
G SEQUOYAH - UllIT 1 3/4 11-2
.-.y v-n 9


I TABLE 4.11-1 (continued)
I TABLE 4.11-1 (continued)
RADIOACTIVE LIOUID WASTE SAMPLING AND ANALYSIS PROGRAM Minimum                         Lower Limit of Liquid Release     Sampling       Analysis       Type of Activity Detection {LLD)
RADIOACTIVE LIOUID WASTE SAMPLING AND ANALYSIS PROGRAM Minimum Lower Limit of Liquid Release Sampling Analysis Type of Activity Detection {LLD)
Type           Frequency       Frequency           Analysis       (pCi/ml)
Type Frequency Frequency Analysis (pCi/ml)
: n. Eatch naate                                                               -7 composite of   Each Batch     Principa) Gamma     5x10 Release-         Each Batch b                   Emitters Condensato Demineralizer                                                               _
-7
negenerant                                     I-131               lx10' Tanka                                                                   -5 M         Dissolved and       lx10
: n. Eatch naate composite of Each Batch Principa) Gamma 5x10 Release-Each Batch b Emitters Condensato Demineralizer negenerant I-131 lx10' Tanka
: 1. !!on-Reclain-     One Batch /M                   Entrained Gases able Waste       composite                     (Gamma emitters)
-5 M
Tank M         H-3                 lx10 0
Dissolved and lx10
: 2. Ilir,h Crud                                 b Each, Batch   Composite Tanks (2)                                       Gross Alpha         lx10
: 1. !!on-Reclain-One Batch /M Entrained Gases able Waste composite (Gamma emitters)
_7 Composite
Tank 0
                                                                                    -6 P-32               lx10 Q     b Sr-89, S r90       5x10 Each Batch     Composite composit                                                 -6 Fe-55               1x10 7
M H-3 lx10
: c. Continuous             0             W         Principa} Gamma     5x10 Releases
: 2. Ilir,h Crud b
* Grab Sample     Composite c   Emitters
Each, Batch Composite
_7 Tanks (2)
Composite Gross Alpha lx10
-6 P-32 lx10 Q
Sr-89, S r90 5x10 b
Each Batch Composite composit
-6 Fe-55 1x10 7
: c. Continuous 0
W Principa} Gamma 5x10 Releases
* Grab Sample Composite Emitters c
: 1. Steam
: 1. Steam
                                                                                    -6 Generator                                     I-131               1x10 Blowdown
-6 Generator I-131 1x10 Blowdown
                                                                                    -5 M               M       Dissolved and       lx10
-5 M
: 2. Turbine         Grab Sample                   Entrained Gases Building                                       (Gamma Emitters)
M Dissolved and lx10 2.
Sump                                                                     ~5 D               M       H-3                 1x10 c
Turbine Grab Sample Entrained Gases Building (Gamma Emitters)
Grab Sample     Composite                                   ,
Sump
Gross Alpha         lx10 P-32                 lx10 0               Q         Sr-89, Sr-90       5x10'O Grab Sample     Composite c                              -6 Fe-55               lx10 SEQU0YAH - UNIT 1                     3/4 11-2 a
~5 D
M H-3 1x10 c
Grab Sample Composite Gross Alpha lx10 P-32 lx10 0
Q Sr-89, Sr-90 5x10'O c
Grab Sample Composite
-6 Fe-55 lx10 SEQU0YAH - UNIT 1 3/4 11-2 a


RADIOACTIVE EFFLUENTS 3/4.11.2 GASEOUS EFFLUENTS DOSE RATE   -              -      .
RADIOACTIVE EFFLUENTS 3/4.11.2 GASEOUS EFFLUENTS DOSE RATE LIMITING CONDITION FOR' OPERATION 3.11".2.1 The dosa rate due to radioactive materials released in gaseous effluents from the site (see Figu.'e 5.1-1) shall be limited to the following:
LIMITING CONDITION FOR' OPERATION 3.11".2.1   The dosa rate due to radioactive materials released in gaseous effluents from the site (see Figu.'e 5.1-1) shall be limited to the following:
a.
: a. For noble gases:     Less than or equal to 500 mrem /yr to the total body and less than or equal to 3000 mrem /yr to the skin, and
For noble gases:
: b. For all radioiodines and for all radioactive materials in particulate form and radionuclides (other than noble gases) with half lives greater than 8 days:   Less than or equal to 1500 mrem /yr to any organ.
Less than or equal to 500 mrem /yr to the total body and less than or equal to 3000 mrem /yr to the skin, and b.
For all radioiodines and for all radioactive materials in particulate form and radionuclides (other than noble gases) with half lives greater than 8 days:
Less than or equal to 1500 mrem /yr to any organ.
APPLICABILITY: At all times except as noted in Table 4.11-2.
APPLICABILITY: At all times except as noted in Table 4.11-2.
ACTION:
ACTION:
Line 177: Line 258:
SURVEILLANCE REQUIREMENTS 4.11.2.1.1 The dose rate due to noble gases in gaseous effluents shall be determined to be within the above limits in accordance with the methods and procedures of the ODCM.
SURVEILLANCE REQUIREMENTS 4.11.2.1.1 The dose rate due to noble gases in gaseous effluents shall be determined to be within the above limits in accordance with the methods and procedures of the ODCM.
6.11.2.1.2 The dose rate due to radioactive materials, other than noble gases, in gaseous effluents shall be determined to be within the above limits in accordance with the methods and procedures of the ODCM by obtaining representative samples and performing analyses in accordance with the sampling and analysis program specified in Table 4.11-2.
6.11.2.1.2 The dose rate due to radioactive materials, other than noble gases, in gaseous effluents shall be determined to be within the above limits in accordance with the methods and procedures of the ODCM by obtaining representative samples and performing analyses in accordance with the sampling and analysis program specified in Table 4.11-2.
    'SEQUOYAH - UNIT 1                       3/4 11-8
'SEQUOYAH - UNIT 1 3/4 11-8


r-TABLE 4.11-2 (Continued)
r-TABLE 4.11-2 (Continued)
TABLE NOTATION
TABLE NOTATION b.
: b. Analyses shall also be performed following shutdown, startup, or a THERMAL POWER change exceeding 15 percent..of. RATED THERMAL POWER within a one hour period.
Analyses shall also be performed following shutdown, startup, or a THERMAL POWER change exceeding 15 percent..of. RATED THERMAL POWER within a one hour period.
: c. Tritium grab sampics shall be taken at least once per.24 hours when the refueling canal is flooded.
c.
: d. Samples-shall be changed at least once per 7 days and analyses shall be completed within 48 hours after changing (or after removal from sampler). Sampling shall also be performed at least once per 24 hours
Tritium grab sampics shall be taken at least once per.24 hours when the refueling canal is flooded.
                        'for at least 7 days following each shutdown, startup or THERMAL POWER level change exceeding 15% of RATED THERMAL POWER in one hour and
d.
                        -analysis shall be completed within 48 hours of changing. When samples collected for 24 hours are analyzed, the corresponding LLD's may be increased by a factor of 10.
Samples-shall be changed at least once per 7 days and analyses shall be completed within 48 hours after changing (or after removal from sampler).
: e. Tritium grab samples shall be taken at least once per 7 days from the ventilation exhaust from the spent fuel pool area, whenever spent fuel is in the spent fuel pool.
Sampling shall also be performed at least once per 24 hours
: f. The ratio of the sample flow rate to the sampled stream flow rate shall be known for the time period covered by each dose or dose rate calculation made in accordance with Specifications 3.11.2.1, 3.11.2.2 and 3.11.2.3.
'for at least 7 days following each shutdown, startup or THERMAL POWER level change exceeding 15% of RATED THERMAL POWER in one hour and
: g. The principal gamma emitters for which the LLD specification applies exclusively are the following radionuclides: Kr-87, Kr-88, Xe-133, Xe-133m, Xe-135, and Xe-138 for gaseous emissions and Mn-54, Fe-59, Co-58, Co-60, Zn-65, Mo-99, Cs-134, Cs-137, Ce-141 and Ce-144 for particulate emissions. This list does not mean that only these nuclides are to be detected and reported. Other peaks which are
-analysis shall be completed within 48 hours of changing. When samples collected for 24 hours are analyzed, the corresponding LLD's may be increased by a factor of 10.
                        -measureable and identifiable, together with the above nuclides, shall also be identified and report.
e.
: h. During releases via this exhaust system.
Tritium grab samples shall be taken at least once per 7 days from the ventilation exhaust from the spent fuel pool area, whenever spent fuel is in the spent fuel pool.
: i. Upper and lower compartments will be sampled prior to purging. The incore instrument room purge sample will be obtained at the shield building exhaust between 5 and 10~ minutes following initiation of the incore instrument room purge. These requirements _are only applicable during MODES 1, 2, 3, 4 and during fuel novencht.
f.
l I
The ratio of the sample flow rate to the sampled stream flow rate shall be known for the time period covered by each dose or dose rate calculation made in accordance with Specifications 3.11.2.1, 3.11.2.2 and 3.11.2.3.
l
g.
              .SEQUOYAH - UNIT'1-3/4 11-11                                 .
The principal gamma emitters for which the LLD specification applies exclusively are the following radionuclides:
1 l
Kr-87, Kr-88, Xe-133, Xe-133m, Xe-135, and Xe-138 for gaseous emissions and Mn-54, Fe-59, Co-58, Co-60, Zn-65, Mo-99, Cs-134, Cs-137, Ce-141 and Ce-144 for particulate emissions. This list does not mean that only these nuclides are to be detected and reported. Other peaks which are
L
-measureable and identifiable, together with the above nuclides, shall also be identified and report.
h.
During releases via this exhaust system.
i.
Upper and lower compartments will be sampled prior to purging.
The incore instrument room purge sample will be obtained at the shield building exhaust between 5 and 10~ minutes following initiation of the incore instrument room purge. These requirements _are only applicable during MODES 1, 2, 3, 4 and during fuel novencht.
l l
.SEQUOYAH - UNIT'1-3/4 11-11 L


3
3
          'ADMlHISTRATIVE CON 1ROLS
'ADMlHISTRATIVE CON 1ROLS h.
: h.     Errors discovered in the transient or accident analyses or in the methods used for such analyses as describal in the safety _ analysis report or in the bases for the technical pecifications that have or could have permitted reactor operation in a manner less conservative than assumed in the analyses.
Errors discovered in the transient or accident analyses or in the methods used for such analyses as describal in the safety _ analysis report or in the bases for the technical pecifications that have or could have permitted reactor operation in a manner less conservative than assumed in the analyses.
: i. Performance of structures, systems, or components that requires remedial action or corrective measures to prevent operation in a manner less conservative than assumed in the accident analyses in the safety analysis report or technical specifications bases; or discovery during unit life of conditions not specifically considered
i.
                        .in the safety analysis report or technical specifications that
Performance of structures, systems, or components that requires remedial action or corrective measures to prevent operation in a manner less conservative than assumed in the accident analyses in the safety analysis report or technical specifications bases; or discovery during unit life of conditions not specifically considered
.in the safety analysis report or technical specifications that
_ require remedial action or corrective measures to prevent the existence or development of an unsafe condition.
_ require remedial action or corrective measures to prevent the existence or development of an unsafe condition.
: j. Offsite releases of radioactive materials in liquid and gaseous
j.
* effluents which exceed the limits of Specification 3.11.1.1 or 3.11.2.1.
Offsite releases of radioactive materials in liquid and gaseous effluents which exceed the limits of Specification 3.11.1.1 or 3.11.2.1.
f
f k.
,                k. Exceeding the limits-in Specification 3.11.1.4 or 3.11.2.6 for the
Exceeding the limits-in Specification 3.11.1.4 or 3.11.2.6 for the storage ~of radioactive materials in the listed tanks.
!                        storage ~of radioactive materials in the listed tanks. The written follow-up report shall include a schedule and a description of activities planned and/or taken to reduce the contents to within the specified limits.
The written follow-up report shall include a schedule and a description of activities planned and/or taken to reduce the contents to within the specified limits.
THIRTY DAY WRITTEN REPORTS
THIRTY DAY WRITTEN REPORTS 6.9.1.13 The types of events listed Lelow shall be the subject of written reports to the Director of the Regional. Of fice within thirty days of occur-rence of the event.
'          6.9.1.13 The types of events listed Lelow shall be the subject of written reports to the Director of the Regional. Of fice within thirty days of occur-rence of the event. The written report shall include, as a minimum, a completed
The written report shall include, as a minimum, a completed copy of a licensee event report form.
,          copy of a licensee event report form. Information provided on the licensee event report form shall be supplemented, as needed, by additional narrative material to provide complete explanation of the circumstances surrounding the
Information provided on the licensee event report form shall be supplemented, as needed, by additional narrative material to provide complete explanation of the circumstances surrounding the event.
',        event.
Reactor protection system or engineered safety feature instrument a.
: a.      Reactor protection system or engineered safety feature instrument settings which are found to be less conservative than those established by the technical specifications but which do not prevent the fulfill-
settings which are found to be less conservative than those established by the technical specifications but which do not prevent the fulfill-
                      ' ment of the functional requirements of affected' systems.
' ment of the functional requirements of affected' systems.
a
a b.
: b. Conditions leading to operation in a degraded mode permitted by a
Conditions leading to operation in a degraded mode permitted by a
                      ' limiting condition for operation or plant shutdown required by a limiting condition for operation.
' limiting condition for operation or plant shutdown required by a limiting condition for operation.
: c. Observed inadequacies in- the implementation of -administrative. ar i
c.
Observed inadequacies in-the implementation of -administrative. ar i
procedural-controls which threaten to cause reduction of degree of redundancy provided in reactor protection systems or engineered 1
procedural-controls which threaten to cause reduction of degree of redundancy provided in reactor protection systems or engineered 1
                      . safety feature systems.
. safety feature systems.
,              . d. Abnormal degradation of systems other,than those specified in 6.9.1.12.c above designed to contain radioactive material resulting from the
. d.
                      ' fission, process.
Abnormal degradation of systems other,than those specified in 6.9.1.12.c above designed to contain radioactive material resulting from the
I SEQUOYAH_- UNIT-1                       6-21 e
' fission, process.
I SEQUOYAH_- UNIT-1 6-21 e
i
i


r 8.1       SPECIFICATION 3/4.11.1 Prior to initial criticality, the requirements for sampling and analysis for items A.6, A.7, and A.9 in Table 4.11-1 may be waived provided the release is through the turbine building sump (item B.2 of the Table 4.11-1).
r 8.1 SPECIFICATION 3/4.11.1 Prior to initial criticality, the requirements for sampling and analysis for items A.6, A.7, and A.9 in Table 4.11-1 may be waived provided the release is through the turbine building sump (item B.2 of the Table 4.11-1).
8.2       SPECIFICATION 4.8.1.1.2c The surveillance requirements for verifying diesel generator voltage and frequency during diesel generator starts is waived for the original surveillance interval only.
8.2 SPECIFICATION 4.8.1.1.2c The surveillance requirements for verifying diesel generator voltage and frequency during diesel generator starts is waived for the original surveillance interval only.
8.3     SPECIFICATION 4.7.8.1, ITEM D 3 The 1/4 inch negative pressure requirement within the spent fuel storage area and ESF pump rooms is waived during the low power test program. However, the auxiliary building gas treatment system shall be capable of naintaining these areas at a slight negative pressure during this period.
8.3 SPECIFICATION 4.7.8.1, ITEM D 3 The 1/4 inch negative pressure requirement within the spent fuel storage area and ESF pump rooms is waived during the low power test program.
8.4     SPECIFICATION 3.3.3.10, TABLE 3.3-13, ITEM 33 Flow rates for ventilation systems for the shield building exhaust, acxiliary building and service building cay be estimated using the design flow rate for the apprcpriate fans.
However, the auxiliary building gas treatment system shall be capable of naintaining these areas at a slight negative pressure during this period.
This interim waiver extends the 30-day limit for 18 months from the issuance of this license. This waiver is considered to be an interim measure until flow rate monitors for the ventilation system for these structures can be repaired or replaced.
8.4 SPECIFICATION 3.3.3.10, TABLE 3.3-13, ITEM 33 Flow rates for ventilation systems for the shield building exhaust, acxiliary building and service building cay be estimated using the design flow rate for the apprcpriate fans.
8.5       SPECIFICATION 3.3.3.9, TABLE 3.3-12, ITEM 30 Prior to initia? criticality, discharge from the Cooling Tower Bloudown Effluent line may continue with an inoperable flow monitor p ovided that flou is estimated every 4 hours during discharge. This interin univer extends the 30 day limit until initial criticality.
This interim waiver extends the 30-day limit for 18 months from the issuance of this license.
i                                                                                         i l
This waiver is considered to be an interim measure until flow rate monitors for the ventilation system for these structures can be repaired or replaced.
SEQU:YA- UNIT-1                           8-1                                   l l
8.5 SPECIFICATION 3.3.3.9, TABLE 3.3-12, ITEM 30 Prior to initia? criticality, discharge from the Cooling Tower Bloudown Effluent line may continue with an inoperable flow monitor p ovided that flou is estimated every 4 hours during discharge. This interin univer extends the 30 day limit until initial criticality.
i i
SEQU:YA-UNIT-1 8-1


ENCLOSURE 2 REASONS AND JUSTIFICATIONS FOR PROPOSED CilANGES TO SEQUOYAll UNIT 1 TECilNICAL SPECIFICATIONS l                                                       1 I
ENCLOSURE 2 REASONS AND JUSTIFICATIONS FOR PROPOSED CilANGES TO SEQUOYAll UNIT 1 TECilNICAL SPECIFICATIONS l
1
1 1


      <h,
<h,
  'h-
'h-4.
: 4. 4
4
            .1. TABLE:2.2-1,'PAGd 2-7 I'                 The-reactor-trip logic was modified at NRC request.                                                   However, the draft technical specifications were incorrectly prepared.                                                   This change reficcts the NRC approved' reactor' trip logic.
.1.
: 2. ACTION 36, PAGE 3/4 3-77 1
TABLE:2.2-1,'PAGd 2-7 I'
The-reactor-trip logic was modified at NRC request.
However, the draft technical specifications were incorrectly prepared.
This change reficcts the NRC approved' reactor' trip logic.
2.
ACTION 36, PAGE 3/4 3-77 1
TThe present wording of ACTION 36 allows no time for the channel (iodine
TThe present wording of ACTION 36 allows no time for the channel (iodine
:or particulate sampler) to be: inoperable before auxiliary sampling starts.               This change would allow us~four hours to correct the situa-tion'or start auxiliary sampling without requiring prompt LER notifica-                                                                                         i tion.'         The 30-day idea is consistent with the general philosophy of standard technical specifications.
:or particulate sampler) to be: inoperable before auxiliary sampling starts.
3.'   SPECIFICATION 3.7.1.2, PAGE 3/4 7 f The steam driven auxiliary feedwater pump cannot be demonstrated OPERABLE before entering MODE 3; there is not sufficient steam available in MODE 4.
This change would allow us~four hours to correct the situa-tion'or start auxiliary sampling without requiring prompt LER notifica-i tion.'
This change should be considered generic to all PWR standard technical j'                 specifications.
The 30-day idea is consistent with the general philosophy of standard technical specifications.
i           4. SPECIFICATION 3.9.1, PAGE 3/4 9-1 The present valve list does not allow for makeup to the Refueling Water Storage Tank during MODE 6. The proposed change allows for makeup while
f 3.'
;                .still preventing an inadvertent dilution of'the reactor coolant system.
SPECIFICATION 3.7.1.2, PAGE 3/4 7 The steam driven auxiliary feedwater pump cannot be demonstrated OPERABLE before entering MODE 3; there is not sufficient steam available in MODE 4.
I 5.'   SPECIFICATION 3.10.5, PAGE 3/4 10-5 i[
This change should be considered generic to all PWR standard technical j'
l                  Position indication calibration is done with bank withdrawal, not individual 1 control rod assembly withdrawal. This change is consistent with Westinghouse standard technical specifications.
specifications.
L
i 4.
: 6. SPECIFICATION 3.11.1.1, PAGE 3/4 11-1                                                                                                                             r This change reflects the fact that only the batch releases from the radwaste system will have radioactivity content determined before release.                   Batch releases from the condensate deminera.lizer regenerant.
SPECIFICATION 3.9.1, PAGE 3/4 9-1 The present valve list does not allow for makeup to the Refueling Water Storage Tank during MODE 6.
The proposed change allows for makeup while
.still preventing an inadvertent dilution of'the reactor coolant system.
I i[
5.'
SPECIFICATION 3.10.5, PAGE 3/4 10-5 l
Position indication calibration is done with bank withdrawal, not individual 1 control rod assembly withdrawal.
This change is consistent with Westinghouse standard technical specifications.
L 6.
SPECIFICATION 3.11.1.1, PAGE 3/4 11-1 r
This change reflects the fact that only the batch releases from the radwaste system will have radioactivity content determined before release.
Batch releases from the condensate deminera.lizer regenerant.
tanks will be. sampled'with a' composite sampler during release.
tanks will be. sampled'with a' composite sampler during release.
ir         .7.   . TABLE-4.ll-1, PAGE 3/4 11-2-& 3/4 ll-2a This change separates the_ releases from the radwaste system and the con--
ir
,                ^densate demineralizer_regenerant tanks. The radwaste. system releases                                 .
.7.
will~be. batch type with sampling and. analysis before release.                                                 The
. TABLE-4.ll-1, PAGE 3/4 11-2-& 3/4 ll-2a This change separates the_ releases from the radwaste system and the con--
                  . condensate deuineralizer regenerant tank releases will'be batch with
^densate demineralizer_regenerant tanks. The radwaste. system releases will~be. batch type with sampling and. analysis before release.
                  - the. release path subject to composite sampling during release.                                                 The-
The
:                  release path for demineralizer regenerant tanks is. equipped with a radia-ition monitor that has isolation capabilities which will prevent releases 1        of liquid:with unusually high 'oncentrations         c                              of radioactive materials.
. condensate deuineralizer regenerant tank releases will'be batch with
y w   - +-           w,,--,-   - ~             ,H ,-,.,-er---ww,-,,-
- the. release path subject to composite sampling during release.
                                                                                              ,,,.-.-t
The-release path for demineralizer regenerant tanks is. equipped with a radia-ition monitor that has isolation capabilities which will prevent releases of liquid:with unusually high 'oncentrations of radioactive materials.
                                                                                                    ,          '--i''y                     -y - am-r v -+s,-w-r -w - sw vg- g g--
1 c
y f
w
- +-
w,,--,-
- ~
,H
,3
,-,.,-er---ww,-,,-
,,,.-.-t 1
'--i''y vhwewmwm-*
Tt'''-*w''''e'-*T--
-y am-r v
-+s,-w-r
-w
- sw vg-g g--


e   e
e e
: 8. SPECIFICATION 3.11.2.1, PAGE 3/4 11-8 The present e,ecification is applicable at all times. The change that is proposed will allow for some relaxation of the sampling requirements during MODES 5 and 6. The specific relaxation request is listed below.
8.
: 9. TABLE 4.11-2, PAGE 3/4 11-11 The present sampling requirement for containment purging requires a grab sample analysis before initiation of containment purge from any compartment. The proposed change eliminates the sampling requirement during the periods when containment integrity is not required, namely MODE 5 and MODE 6 when fuel is not being moved. This change would enable us to start and stop the purge fans without having to grab sar ple an open containment. The containment purge fans exhaust to the shield building vent which is continuously monitored and sampled on a regular basis.
SPECIFICATION 3.11.2.1, PAGE 3/4 11-8 The present e,ecification is applicable at all times.
: 10. SPECIFICATION 6.9.1.13, PAGE 6-21 Correction, specification 6.9.1.8.c does not exist.
The change that is proposed will allow for some relaxation of the sampling requirements during MODES 5 and 6.
: 11. SPECIFICATION 8.5, PAGE 8-1 The flow monitor is not functioning properly, and we do not expect to have it repaired before the 30-day outage limit expires on April 2, 1980.
The specific relaxation request is listed below.
We are proposing a change to allow us to extend the outage time until initial criticality. All sampling requirements and limits will be met before release. Flowrates will be estimated during the release periods.
9.
TABLE 4.11-2, PAGE 3/4 11-11 The present sampling requirement for containment purging requires a grab sample analysis before initiation of containment purge from any compartment. The proposed change eliminates the sampling requirement during the periods when containment integrity is not required, namely MODE 5 and MODE 6 when fuel is not being moved. This change would enable us to start and stop the purge fans without having to grab sar ple an open containment.
The containment purge fans exhaust to the shield building vent which is continuously monitored and sampled on a regular basis.
10.
SPECIFICATION 6.9.1.13, PAGE 6-21 Correction, specification 6.9.1.8.c does not exist.
11.
SPECIFICATION 8.5, PAGE 8-1 The flow monitor is not functioning properly, and we do not expect to have it repaired before the 30-day outage limit expires on April 2, 1980.
We are proposing a change to allow us to extend the outage time until initial criticality. All sampling requirements and limits will be met before release.
Flowrates will be estimated during the release periods.
In addition, no radiological hazard till exist until initial criticality.
In addition, no radiological hazard till exist until initial criticality.
I 1
I}}
l}}

Latest revision as of 05:51, 2 January 2025

Proposed Changes to Tech Specs,Consisting of Clarification Changes,Corrections & Mods to Radioactive Effluent Monitoring Requirements
ML19305C723
Person / Time
Site: Sequoyah Tennessee Valley Authority icon.png
Issue date: 03/28/1980
From:
TENNESSEE VALLEY AUTHORITY
To:
Shared Package
ML19305C722 List:
References
NUDOCS 8003310312
Download: ML19305C723 (17)
v • d • e


Text

.

U,,.,.

ENCLOSURE 1 PROPOSED CllANCES TO SEQUOYAlf UNIT 1 TEClINICAL SPECIFICATIONS 8003310 g

r M

TABLE 2.2-1 (Continued)

SQ; REAC10R TRIP SYSTEM INSTRUMENTATION TRIP SETPOINTS

[

FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES

=

-4

21.

Turbine Impulse Chamber Pressure -

< 10% Turbine Impulse 5 11% Turbine Impulse (P-13) Input' to Low Power Reactor Trips Pressure Equivalent Pressure Equivalent Block P-7 22' Power Range Neutron Flux - (P-8) Input

< 35% of RATED 5 36% of RATED to Low Reactor Coolant Loop Flow IliERMAL POWER THERMAL POWER Reactor Trip

23. ' Power Range Neavron Flux - (P-10) -

> 10% of RATED

> 9% of RATED Enable block <>T Source, Intermediate, THERMAL POWER THERMAL POWER

.and Power Range (low setpoint) reactor 4

Trips 24.

Reactor Trip P-4 Not Applicable Not Applicable i

NOTATION I

b I

NOTE 1:

Overtemperature aT (

) 5 AT, (Ky 2 (1 + 12 )[T(

)-T'] + K (P-P') - f (aI)}

-K 3

j 1+t S S

1+1 S j

3 4

f

= Lag compensator on measured AT where:

j

]

j

= Time constants utilized in the lag compensator for AT *l = 2 secs.

I 3

AT,

= Indicated AT at RATED THERMAL POWER K

$ 1.14 l

3 K

= 0.009 2

1 l

l

TABLE 3.3-13 (Continued)

_ TABLE NOTATION At all times.

During waste gas disposal system operation.

ACTION 32 -

With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, the contents of the tank (s) may be released to the environment for up to 14 days provided that prior to initiating the release:

At least two independent samples of the tank's contents a.

are analyzed, and b.

At least two technically qualified members of the Facility Staff independently verify the release rate calculations and discharge vaM lineup; Otherwise, suspend release of radioactive effluents via this pathway.

ACTION 33 -

With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via this pathway may continue for up to 30 days provided the flow rate is estimated at least once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />.

ACTION 34 -

With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via this pathway may continue for up to 30 days provided grab samples are taken at least once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> and these samples are analyzed for noble gas gross activity within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.

ACTION 35 -

With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, operation of this waste gas disposal system may continue for up to 7 days provided grab

-samples are collected at least once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> and analyzed within the following 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. With the hydrogen and oxygen-monitors inoperable, be in at least HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

ACTION 36 -

With the number of channels OPERABLE less than required by the Minimum Channels OPERABLE requirement, effluent releases via the af fected pathway may continue for up to 30 days provided that within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> after the channel has been declared' inoperable samples are continuously collected with auxiliary campling equipment as required in Table 4.11-2.

SEQUOYAH - UNIT 1 3/4 3-77

PLANT SYSTEMS AUXILIARY FEEDWATER SYSTEM LIMITING CONDITION FOR OPERATION

3. 7.1. 2 At least three independent steam generator auxiliary feedwater pumps and associated flow paths shall be OPERABLE with:

Two feedwater pumps, each capable of being powered from separate a.

shutdown boards, and b.

Ona feedwater pump capable of being powered from an OPERABLE steam supply system.

APPLICABILITY: MODES 1, 2 and 3.

ACTION:

Uith one auxiliary feedwater pump inoperabic, restore at 1 cast three a.

auxiliary feeduater pumps (two capabic of being poucred from separate shutdoun boards and one capabic of being poucred by an OPERA 3LC steam supply system) to OPERABLE status within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> or he in at least l!OT STA: DUY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in !!OT SliUTD0tm within the following 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

b.

The provisions of Specification 3.0.4 are not applicabic.

SURVEILLANCE RE0VIREMENTS

4. 7.1. 2 Eacn auxiliary feedwater pump shall be demonstrated OPERABLE:

At least once per 31 days by:

a.

1.

Verifying that each motor driven pump develops a differential pressure of greater than or equal to 1397 psid on recirculation flow.

t 2.

Verifying that the steam turbine driven pump develops a differen-tial pressure of greater than or equal to 1183 psid on recircula, tion flow when the secondary steam supply pressure is greater than 842 psig.

3.

Verifying that each ron-automatic valve in the flow path that is not locked, sealed, or otherwise secured in position, is in its correct position, and 4

Verifying that each automatic control valve in the flow path is OPERABLE whenever the auxiliary feedwater system is placed in automatic control or when above 10% of RATED THERMAL POWER.

SEQUOYAH - UNIT 1 3/4 7-5 l

3/4.9 REFUELING OPERATIONS 3/4.9.1 BORON CONCENTRATION LIMITING CONDITION FOR OPERATION 3.9.1 With the reactor vessel head unbolted or removed, the boron concentration of all filled portions of the Reactor Coolant System and the refueling canal shall be maintained uniform and sufficient to ensure that the more restrictive of the following reactivity conditions is met:

a.

Either a K f 0.95 or less, which includes a 1% delta k/k conser-eff vative allowance for uncertainties, or b.

A boron concentration of greater than or equal to 2000 ppm, which includes a 50 ppm conservative allowance for uncertainties.

APPLICABILITY: MODE 6*

ACTION:

With the requirements of the above specification not satisfied, immediately suspend all operations involving CORE ALTERATIONS or positive reactivity changes and initiate and continue boration at greater than or equal to 10 gpm of a solution containing 20,000 ppm boron or its equivalent until K is eff reduced to less than or equal to 0.95 or the boron concentration is restored to greater than or equal to 2000 ppm, whichever is the more restrictive.

The provisions of Specification 3.0.3 are not applicable.

SURVEILLANCE RE0VIREMENTS 4.9.1.1 The more restrictive of-the above two reactivity conditions shall be determined prior to:

a.

Removing or unbolting the reactor vessel head, and b.

Withdrawal of any full length control rod in excess of 3 feet from its fully inserted position within the reactor pressure vessel.

4. 9.1. 2 The boron concentration of the reactor coolant system and the refueling canal shall be determined by chemical analysis at least once per 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />.

^Ihe reactor snall be maintained in MODE 6 wherever the reactor vessel head is unbolted or removed and fuel is in the reactor vessel.

i

~

SEQUOYAH - UNIT 1 3/4 9-1

REFUELit.G OPERATIONS SUhVEILLA!!CE REnUIRE"E!;TS (Continued) 4.9.1.3 One of the following valve conbinationn shall be verifled clor,ed under administrative control at 1 cast once per 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />s:

Conbination A Conbination B Combination C Combination D

a. 1-31-536
a. 1-81-336
a. 1-81-536
a. 1-31-536
b. 1-62-922
b. 1-62-922
b. 1-62-907
b. 1-62-907
c. 1-62-916
c. 1-62-916 c.

1-62-914

c. 1-62-914
d. 1-62-933
d. 1-62-940
d. 1-62-921
d. 1-62-921
c. 1-62-696
c. 1-62-933
c. 1-62-940
f. 1-62-929
f. 1-62-696
g. 1-62-932
n. 1-62-929
h. 1-FCV-62-128
h. 1-62-932
1. 1-FCV-62-128 SEQUOYAll - U 'IT 1 3/4 9-la

SPECIAL TEST EXCEPTIONS 3/4.10.5 POSITION INDICATION SYSTEM - SHUTDOWN 1

LIMITING CONDITION FOR OPERATION 3.10.5 The limitations of Specification 3.1.3.3 may be suspended during the performance of individual full length (shutdown and control) rod drop time measurements provided; a.

Only one shutdown or control bank is withdrawn from the fully inserted position at a time, and b.

The rod position indicator is OPERABLE during the withdrawal of the rods.*

APPLICABILITY: MODES 3, 4 and 5 during performance of rod drop time measurements.

ACTION:

With the position indication system inoperable, or more than one bank of rods withdrawn, immediately open the reactor trip breakers.

SURVEILLANCE REOUIREMENTS 4.10.5 The above required rod position indication systems shall be determined to be OPERABLE within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> prior to the start of and at least once per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> thereafter during rod drop time measurements by verifying the demand position indication system and the rod position indication systems agree:

a.

Within 12 steps when the rods are stationary, and b.

Within 24 steps during rod motion.

This reqeirement is not applicable during the initial calibration of the rod position indication system provided (1) K,ff is maintained less than.or equal to 0.95, and (2) only one shutdown or control bank is withdrawn.from the fully inserted position at one time.

SEQUOYAH - UNIT 1 3/4 10-5

3/4.11 RADIOACTIVE EFFLUENTS

- 3/4.11.1 LIOUID EFFLUENTS CONCENTRATION LIMITING CONDITION FOR OPERATION 3.11.1.1 The concentration of radioactive material released from the site (see Figure 5.1-1) shall be limited to the concentrations specified in 10 CFR Part 20, Appendix B, Table II, Column 2 for radionuclides other than dissolved or entrained noble gases. For dissolved gr entrained noble gises, the concentration shall be limited to 2 x 10 microcuries/ml total activity.

APPLICABILITY: At all times.

ACTION:

With the concentration of radioactive material released from the site exceeding the above limits, immediately restore the concentration to within the above limits.

SURVEILLANCE REOUIREMENTS 4.11.1.1.1 The radioactivity content of each batch of radioactive liquid waste from the radwaste system tanks shall be determined prior to release by sampling and analysis in accordance with Table 4.11-1. The results of pre-release analyses shall be used with the calculational metods in the ODCl! to assure that the concentration at the point of release is maintained within the limits of Specification 3.11.1.1.

4.11.1.1.2 Post-release analyses of samples composited from batch releases shall be performed in accordance with Table 4.11-1.

The results of the previous post-release analyses shall be used with the calculational methods in the 00CM to assure that the co.ncentrations at the point of release were maintained within the limits of Specification 3.11.1.1.

4.11.1.1.3 The radioactivity concentration of liquids discharged from continuous release points shall be determined by collection and analysis of samples in accordance with Table 4.11-1.

The results of the analyses shall be used with the calculational methods in the ODCM to assure that the concentrations at the point of release are maintained within the limits of Specification 3.11.1.1.

l

-SEQUOYAH - UNIT 1-3/4 11-1 I

6 TABLE 4.11-1 RADI0 ACTIVE LIQUID WASTE SAMPtit4G AND ANALYSIS PROGRAM Minimum Lower Limit of Liquid Release Sampling Analysis Type of Activity Dctection{LLD)

Type Frequency F 9quency Analysis (pCi/ml)

A. Batch Waste P

P

~7 Release-Each Batch Each Gatch Principa 5x10 Emitters} Gamma Radvaste

}

Systen Tankad

-6 I-131 1x10 h Waste Con-

-5 densate P

M Dissolved and 1x10

, Tanks (3)

One Batch /M Entrained Gases

2. Cask Decon.

(Gamma emitters) tamination Tank P

M 11 - 3 1x10'O b

3. Laundry Each Batch Composite

_j Tanks (2)

Gross Alpha 1x10

4. Chemical j

Drain Tank

-6 P-32 lx10

'5. Monitor Tank 6.-Distillate Tanks (2)

P Q

Sr-89, Sr-90 5x10'8 b

Each Batch Composite

7. Condensate

-6 l

Demineralizer Fe-55 1x10 Waste Evaporator Blowdown

. Tank (1) l W

G SEQUOYAH - UllIT 1 3/4 11-2

.-.y v-n 9

I TABLE 4.11-1 (continued)

RADIOACTIVE LIOUID WASTE SAMPLING AND ANALYSIS PROGRAM Minimum Lower Limit of Liquid Release Sampling Analysis Type of Activity Detection {LLD)

Type Frequency Frequency Analysis (pCi/ml)

-7

n. Eatch naate composite of Each Batch Principa) Gamma 5x10 Release-Each Batch b Emitters Condensato Demineralizer negenerant I-131 lx10' Tanka

-5 M

Dissolved and lx10

1. !!on-Reclain-One Batch /M Entrained Gases able Waste composite (Gamma emitters)

Tank 0

M H-3 lx10

2. Ilir,h Crud b

Each, Batch Composite

_7 Tanks (2)

Composite Gross Alpha lx10

-6 P-32 lx10 Q

Sr-89, S r90 5x10 b

Each Batch Composite composit

-6 Fe-55 1x10 7

c. Continuous 0

W Principa} Gamma 5x10 Releases

1. Steam

-6 Generator I-131 1x10 Blowdown

-5 M

M Dissolved and lx10 2.

Turbine Grab Sample Entrained Gases Building (Gamma Emitters)

Sump

~5 D

M H-3 1x10 c

Grab Sample Composite Gross Alpha lx10 P-32 lx10 0

Q Sr-89, Sr-90 5x10'O c

Grab Sample Composite

-6 Fe-55 lx10 SEQU0YAH - UNIT 1 3/4 11-2 a

RADIOACTIVE EFFLUENTS 3/4.11.2 GASEOUS EFFLUENTS DOSE RATE LIMITING CONDITION FOR' OPERATION 3.11".2.1 The dosa rate due to radioactive materials released in gaseous effluents from the site (see Figu.'e 5.1-1) shall be limited to the following:

a.

For noble gases:

Less than or equal to 500 mrem /yr to the total body and less than or equal to 3000 mrem /yr to the skin, and b.

For all radioiodines and for all radioactive materials in particulate form and radionuclides (other than noble gases) with half lives greater than 8 days:

Less than or equal to 1500 mrem /yr to any organ.

APPLICABILITY: At all times except as noted in Table 4.11-2.

ACTION:

With the dose rate (s) exceeding the above limits, immediately decrease the release rate to within the above limit (s).

SURVEILLANCE REQUIREMENTS 4.11.2.1.1 The dose rate due to noble gases in gaseous effluents shall be determined to be within the above limits in accordance with the methods and procedures of the ODCM.

6.11.2.1.2 The dose rate due to radioactive materials, other than noble gases, in gaseous effluents shall be determined to be within the above limits in accordance with the methods and procedures of the ODCM by obtaining representative samples and performing analyses in accordance with the sampling and analysis program specified in Table 4.11-2.

'SEQUOYAH - UNIT 1 3/4 11-8

r-TABLE 4.11-2 (Continued)

TABLE NOTATION b.

Analyses shall also be performed following shutdown, startup, or a THERMAL POWER change exceeding 15 percent..of. RATED THERMAL POWER within a one hour period.

c.

Tritium grab sampics shall be taken at least once per.24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> when the refueling canal is flooded.

d.

Samples-shall be changed at least once per 7 days and analyses shall be completed within 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> after changing (or after removal from sampler).

Sampling shall also be performed at least once per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />

'for at least 7 days following each shutdown, startup or THERMAL POWER level change exceeding 15% of RATED THERMAL POWER in one hour and

-analysis shall be completed within 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> of changing. When samples collected for 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> are analyzed, the corresponding LLD's may be increased by a factor of 10.

e.

Tritium grab samples shall be taken at least once per 7 days from the ventilation exhaust from the spent fuel pool area, whenever spent fuel is in the spent fuel pool.

f.

The ratio of the sample flow rate to the sampled stream flow rate shall be known for the time period covered by each dose or dose rate calculation made in accordance with Specifications 3.11.2.1, 3.11.2.2 and 3.11.2.3.

g.

The principal gamma emitters for which the LLD specification applies exclusively are the following radionuclides:

Kr-87, Kr-88, Xe-133, Xe-133m, Xe-135, and Xe-138 for gaseous emissions and Mn-54, Fe-59, Co-58, Co-60, Zn-65, Mo-99, Cs-134, Cs-137, Ce-141 and Ce-144 for particulate emissions. This list does not mean that only these nuclides are to be detected and reported. Other peaks which are

-measureable and identifiable, together with the above nuclides, shall also be identified and report.

h.

During releases via this exhaust system.

i.

Upper and lower compartments will be sampled prior to purging.

The incore instrument room purge sample will be obtained at the shield building exhaust between 5 and 10~ minutes following initiation of the incore instrument room purge. These requirements _are only applicable during MODES 1, 2, 3, 4 and during fuel novencht.

l l

.SEQUOYAH - UNIT'1-3/4 11-11 L

3

'ADMlHISTRATIVE CON 1ROLS h.

Errors discovered in the transient or accident analyses or in the methods used for such analyses as describal in the safety _ analysis report or in the bases for the technical pecifications that have or could have permitted reactor operation in a manner less conservative than assumed in the analyses.

i.

Performance of structures, systems, or components that requires remedial action or corrective measures to prevent operation in a manner less conservative than assumed in the accident analyses in the safety analysis report or technical specifications bases; or discovery during unit life of conditions not specifically considered

.in the safety analysis report or technical specifications that

_ require remedial action or corrective measures to prevent the existence or development of an unsafe condition.

j.

Offsite releases of radioactive materials in liquid and gaseous effluents which exceed the limits of Specification 3.11.1.1 or 3.11.2.1.

f k.

Exceeding the limits-in Specification 3.11.1.4 or 3.11.2.6 for the storage ~of radioactive materials in the listed tanks.

The written follow-up report shall include a schedule and a description of activities planned and/or taken to reduce the contents to within the specified limits.

THIRTY DAY WRITTEN REPORTS 6.9.1.13 The types of events listed Lelow shall be the subject of written reports to the Director of the Regional. Of fice within thirty days of occur-rence of the event.

The written report shall include, as a minimum, a completed copy of a licensee event report form.

Information provided on the licensee event report form shall be supplemented, as needed, by additional narrative material to provide complete explanation of the circumstances surrounding the event.

Reactor protection system or engineered safety feature instrument a.

settings which are found to be less conservative than those established by the technical specifications but which do not prevent the fulfill-

' ment of the functional requirements of affected' systems.

a b.

Conditions leading to operation in a degraded mode permitted by a

' limiting condition for operation or plant shutdown required by a limiting condition for operation.

c.

Observed inadequacies in-the implementation of -administrative. ar i

procedural-controls which threaten to cause reduction of degree of redundancy provided in reactor protection systems or engineered 1

. safety feature systems.

. d.

Abnormal degradation of systems other,than those specified in 6.9.1.12.c above designed to contain radioactive material resulting from the

' fission, process.

I SEQUOYAH_- UNIT-1 6-21 e

i

r 8.1 SPECIFICATION 3/4.11.1 Prior to initial criticality, the requirements for sampling and analysis for items A.6, A.7, and A.9 in Table 4.11-1 may be waived provided the release is through the turbine building sump (item B.2 of the Table 4.11-1).

8.2 SPECIFICATION 4.8.1.1.2c The surveillance requirements for verifying diesel generator voltage and frequency during diesel generator starts is waived for the original surveillance interval only.

8.3 SPECIFICATION 4.7.8.1, ITEM D 3 The 1/4 inch negative pressure requirement within the spent fuel storage area and ESF pump rooms is waived during the low power test program.

However, the auxiliary building gas treatment system shall be capable of naintaining these areas at a slight negative pressure during this period.

8.4 SPECIFICATION 3.3.3.10, TABLE 3.3-13, ITEM 33 Flow rates for ventilation systems for the shield building exhaust, acxiliary building and service building cay be estimated using the design flow rate for the apprcpriate fans.

This interim waiver extends the 30-day limit for 18 months from the issuance of this license.

This waiver is considered to be an interim measure until flow rate monitors for the ventilation system for these structures can be repaired or replaced.

8.5 SPECIFICATION 3.3.3.9, TABLE 3.3-12, ITEM 30 Prior to initia? criticality, discharge from the Cooling Tower Bloudown Effluent line may continue with an inoperable flow monitor p ovided that flou is estimated every 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> during discharge. This interin univer extends the 30 day limit until initial criticality.

i i

SEQU:YA-UNIT-1 8-1

ENCLOSURE 2 REASONS AND JUSTIFICATIONS FOR PROPOSED CilANGES TO SEQUOYAll UNIT 1 TECilNICAL SPECIFICATIONS l

1 1

<h,

'h-4.

4

.1.

TABLE:2.2-1,'PAGd 2-7 I'

The-reactor-trip logic was modified at NRC request.

However, the draft technical specifications were incorrectly prepared.

This change reficcts the NRC approved' reactor' trip logic.

2.

ACTION 36, PAGE 3/4 3-77 1

TThe present wording of ACTION 36 allows no time for the channel (iodine

or particulate sampler) to be: inoperable before auxiliary sampling starts.

This change would allow us~four hours to correct the situa-tion'or start auxiliary sampling without requiring prompt LER notifica-i tion.'

The 30-day idea is consistent with the general philosophy of standard technical specifications.

f 3.'

SPECIFICATION 3.7.1.2, PAGE 3/4 7 The steam driven auxiliary feedwater pump cannot be demonstrated OPERABLE before entering MODE 3; there is not sufficient steam available in MODE 4.

This change should be considered generic to all PWR standard technical j'

specifications.

i 4.

SPECIFICATION 3.9.1, PAGE 3/4 9-1 The present valve list does not allow for makeup to the Refueling Water Storage Tank during MODE 6.

The proposed change allows for makeup while

.still preventing an inadvertent dilution of'the reactor coolant system.

I i[

5.'

SPECIFICATION 3.10.5, PAGE 3/4 10-5 l

Position indication calibration is done with bank withdrawal, not individual 1 control rod assembly withdrawal.

This change is consistent with Westinghouse standard technical specifications.

L 6.

SPECIFICATION 3.11.1.1, PAGE 3/4 11-1 r

This change reflects the fact that only the batch releases from the radwaste system will have radioactivity content determined before release.

Batch releases from the condensate deminera.lizer regenerant.

tanks will be. sampled'with a' composite sampler during release.

ir

.7.

. TABLE-4.ll-1, PAGE 3/4 11-2-& 3/4 ll-2a This change separates the_ releases from the radwaste system and the con--

^densate demineralizer_regenerant tanks. The radwaste. system releases will~be. batch type with sampling and. analysis before release.

The

. condensate deuineralizer regenerant tank releases will'be batch with

- the. release path subject to composite sampling during release.

The-release path for demineralizer regenerant tanks is. equipped with a radia-ition monitor that has isolation capabilities which will prevent releases of liquid:with unusually high 'oncentrations of radioactive materials.

1 c

y f

w

- +-

w,,--,-

- ~

,H

,3

,-,.,-er---ww,-,,-

,,,.-.-t 1

'--iy vhwewmwm-*

Tt-*w'e'-*T--

-y am-r v

-+s,-w-r

-w

- sw vg-g g--

e e

8.

SPECIFICATION 3.11.2.1, PAGE 3/4 11-8 The present e,ecification is applicable at all times.

The change that is proposed will allow for some relaxation of the sampling requirements during MODES 5 and 6.

The specific relaxation request is listed below.

9.

TABLE 4.11-2, PAGE 3/4 11-11 The present sampling requirement for containment purging requires a grab sample analysis before initiation of containment purge from any compartment. The proposed change eliminates the sampling requirement during the periods when containment integrity is not required, namely MODE 5 and MODE 6 when fuel is not being moved. This change would enable us to start and stop the purge fans without having to grab sar ple an open containment.

The containment purge fans exhaust to the shield building vent which is continuously monitored and sampled on a regular basis.

10.

SPECIFICATION 6.9.1.13, PAGE 6-21 Correction, specification 6.9.1.8.c does not exist.

11.

SPECIFICATION 8.5, PAGE 8-1 The flow monitor is not functioning properly, and we do not expect to have it repaired before the 30-day outage limit expires on April 2, 1980.

We are proposing a change to allow us to extend the outage time until initial criticality. All sampling requirements and limits will be met before release.

Flowrates will be estimated during the release periods.

In addition, no radiological hazard till exist until initial criticality.

I

Retrieved from "https://kanterella.com/w/index.php?title=ML19305C723&oldid=4812779"