|
|
(3 intermediate revisions by the same user not shown) |
Line 2: |
Line 2: |
| | number = ML060960075 | | | number = ML060960075 |
| | issue date = 05/05/2006 | | | issue date = 05/05/2006 |
| | title = Watts Bar, Unit 1 - License Amendment 61 Regarding the Change in the Steam Generator Narrow-Range Level Requirements to Accommodate the Replacement Steam Generators | | | title = License Amendment 61 Regarding the Change in the Steam Generator Narrow-Range Level Requirements to Accommodate the Replacement Steam Generators |
| | author name = Pickett D V | | | author name = Pickett D |
| | author affiliation = NRC/NRR/ADRO/DORL | | | author affiliation = NRC/NRR/ADRO/DORL |
| | addressee name = Singer K W | | | addressee name = Singer K |
| | addressee affiliation = Tennessee Valley Authority | | | addressee affiliation = Tennessee Valley Authority |
| | docket = 05000390 | | | docket = 05000390 |
Line 19: |
Line 19: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:May 5, 2006Mr. Karl W. Singer Chief Nuclear Officer and Executive Vice President Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, Tennessee 37402-2801 | | {{#Wiki_filter:May 5, 2006 Mr. Karl W. Singer Chief Nuclear Officer and Executive Vice President Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, Tennessee 37402-2801 |
|
| |
|
| ==SUBJECT:== | | ==SUBJECT:== |
| WATTS BAR NUCLEAR PLANT, UNIT 1 - ISSUANCE OF AMENDMENTREGARDING THE CHANGE IN THE STEAM GENERATOR NARROW RANGE LEVEL REQUIREMENTS TO ACCOMMODATE THE REPLACEMENT STEAM GENERATORS AT WATTS BAR NUCLEAR PLANT, UNIT 1 (TAC NO. MC 9235) | | WATTS BAR NUCLEAR PLANT, UNIT 1 ISSUANCE OF AMENDMENT REGARDING THE CHANGE IN THE STEAM GENERATOR NARROW RANGE LEVEL REQUIREMENTS TO ACCOMMODATE THE REPLACEMENT STEAM GENERATORS AT WATTS BAR NUCLEAR PLANT, UNIT 1 (TAC NO. MC9235) |
|
| |
|
| ==Dear Mr. Singer:== | | ==Dear Mr. Singer:== |
|
| |
|
| The Commission has issued the enclosed Amendment No. 61 to Facility Operating LicenseNo. NPF-90 for Watts Bar Nuclear Plant (WBN), Unit 1. This amendment is in response to your application dated December 13, 2005 (WB-TS-05-06).The amendment authorizes modification to the Technical Specifications for WBN, Unit 1 toinclude a change in the steam generator (SG) level requirement for Limiting Condition for Operation 3.4.7.b and Surveillance Requirements 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater thanor equal to () 6 percent (%) to 32% following replacement of the SGs during the Unit 1,Cycle 7 refueling outage, which is currently scheduled to begin in the fall of 2006.A copy of the safety evaluation is also enclosed. Notice of issuance will be included in theCommission's biweekly Federal Register notice. Sincerely,/RA/ Douglas V. Pickett, Senior Project Manager Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor RegulationDocket No. 50-390 | | The Commission has issued the enclosed Amendment No. 61 to Facility Operating License No. NPF-90 for Watts Bar Nuclear Plant (WBN), Unit 1. This amendment is in response to your application dated December 13, 2005 (WB-TS-05-06). |
| | The amendment authorizes modification to the Technical Specifications for WBN, Unit 1 to include a change in the steam generator (SG) level requirement for Limiting Condition for Operation 3.4.7.b and Surveillance Requirements 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to ($) 6 percent (%) to $ 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage, which is currently scheduled to begin in the fall of 2006. |
| | A copy of the safety evaluation is also enclosed. Notice of issuance will be included in the Commission's biweekly Federal Register notice. |
| | Sincerely, |
| | /RA/ |
| | Douglas V. Pickett, Senior Project Manager Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-390 |
|
| |
|
| ==Enclosures:== | | ==Enclosures:== |
| : 1. Amendment No. 61 to NPF-90 | | : 1. Amendment No. 61 to NPF-90 |
| : 2. Safety Evaluationcc w/enclosures: See next page May 5, 2006Mr. Karl W. Singer Chief Nuclear Officer and Executive Vice President Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, Tennessee 37402-2801 | | : 2. Safety Evaluation cc w/enclosures: See next page |
| | |
| | May 5, 2006 Mr. Karl W. Singer Chief Nuclear Officer and Executive Vice President Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, Tennessee 37402-2801 |
|
| |
|
| ==SUBJECT:== | | ==SUBJECT:== |
| WATTS BAR NUCLEAR PLANT, UNIT 1 - ISSUANCE OF AMENDMENTREGARDING THE CHANGE IN THE STEAM GENERATOR NARROW RANGE LEVEL REQUIREMENTS TO ACCOMMODATE THE REPLACEMENT STEAM GENERATORS AT WATTS BAR NUCLEAR PLANT, UNIT 1 (TAC NO. MC 9235) | | WATTS BAR NUCLEAR PLANT, UNIT 1 ISSUANCE OF AMENDMENT REGARDING THE CHANGE IN THE STEAM GENERATOR NARROW RANGE LEVEL REQUIREMENTS TO ACCOMMODATE THE REPLACEMENT STEAM GENERATORS AT WATTS BAR NUCLEAR PLANT, UNIT 1 (TAC NO. MC9235) |
|
| |
|
| ==Dear Mr. Singer:== | | ==Dear Mr. Singer:== |
|
| |
|
| The Commission has issued the enclosed Amendment No. 61 to Facility Operating LicenseNo. NPF-90 for Watts Bar Nuclear Plant (WBN), Unit 1. This amendment is in response to your application dated December 13, 2005 (WB-TS-05-06).The amendment authorizes modification to the Technical Specifications for WBN, Unit 1 toinclude a change in the steam generator (SG) level requirement for Limiting Condition for Operation 3.4.7.b and Surveillance Requirements 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater thanor equal to () 6 percent (%) to 32% following replacement of the SGs during the Unit 1,Cycle 7 refueling outage, which is currently scheduled to begin in the fall of 2006.A copy of the safety evaluation is also enclosed. Notice of issuance will be included in theCommission's biweekly Federal Register notice. Sincerely,/RA/ Douglas V. Pickett, Senior Project Manager Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor RegulationDocket No. 50-390 | | The Commission has issued the enclosed Amendment No. 61 to Facility Operating License No. NPF-90 for Watts Bar Nuclear Plant (WBN), Unit 1. This amendment is in response to your application dated December 13, 2005 (WB-TS-05-06). |
| | The amendment authorizes modification to the Technical Specifications for WBN, Unit 1 to include a change in the steam generator (SG) level requirement for Limiting Condition for Operation 3.4.7.b and Surveillance Requirements 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to ($) 6 percent (%) to $ 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage, which is currently scheduled to begin in the fall of 2006. |
| | A copy of the safety evaluation is also enclosed. Notice of issuance will be included in the Commission's biweekly Federal Register notice. |
| | Sincerely, |
| | /RA/ |
| | Douglas V. Pickett, Senior Project Manager Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-390 |
|
| |
|
| ==Enclosures:== | | ==Enclosures:== |
| : 1. Amendment No. 61 to NPF-90 | | : 1. Amendment No. 61 to NPF-90 |
| : 2. Safety Evaluationcc w/enclosures: See next page DISTRIBUTION:PUBLICLPL2-2 r/fRidsOgcRpRidsAcrsAcnwMailCenterG. Hill, OIS (2)RidsNrrDorlLpl2-2 RidsNrrLACSolaRidsNrrPMDPickett S. Crane, NRR RidsNrrDssSpwbRidsRgn2MailCenterRidsNrrDorlDprRidsNrrDirsItsbPackage No.: ML061280210TS: ML061280491ADAMS Accession No. ML060960075*No Legal ObjectionNRR-058OFFICELPL2-2/PELPL2-2/PMLPL2-2/LASPWB/BCOGCLPL2-2/BCNAMESCrane:emDPickettRSolaJNakoskiSUttal *MMarshallDATE04/25/0604/24/0604/24/0604/26/0605/02/0605/05/06 OFFICIAL RECORD COPY Mr. Karl W. Singer Tennessee Valley Authority WATTS BAR NUCLEAR PLANT cc:Mr. Ashok S. Bhatnagar, Senior Vice President Nuclear Operations Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, TN 37402-2801 Mr. Larry S. Bryant, Vice PresidentNuclear Engineering & Technical Services Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, TN 37402-2801Mr. Robert J. Beecken, Vice PresidentNuclear Support Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, TN 37402-2801 Mr. Michael D. SkaggsSite Vice President Watts Bar Nuclear Plant Tennessee Valley Authority P.O. Box 2000 Spring City, TN 37381General CounselTennessee Valley Authority ET 11A 400 West Summit Hill DriveKnoxville, TN 37902Mr. John C. Fornicola, ManagerNuclear Assurance and Licensing Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, TN 37402-2801Ms. Ann P. Harris341 Swing Loop Road Rockwood, Tennessee 37854Mr. Glenn W. Morris, Manager Corporate Nuclear Licensing and Industry Affairs Tennessee Valley Authority 4X Blue Ridge 1101 Market Street Chattanooga, TN 37402-2801Mr. Paul L. Pace, ManagerLicensing and Industry Affairs Watts Bar Nuclear Plant Tennessee Valley Authority P.O. Box 2000 Spring City, TN 37381Mr. Jay Laughlin, Plant ManagerWatts Bar Nuclear Plant Tennessee Valley Authority P.O. Box 2000 Spring City, TN 37381Senior Resident InspectorWatts Bar Nuclear Plant U.S. Nuclear Regulatory Commission 1260 Nuclear Plant Road Spring City, TN 37381County Executive 375 Church Street Suite 215 Dayton, TN 37321County Mayor P. O. Box 156 Decatur, TN 37322Mr. Lawrence E. Nanney, DirectorDivision of Radiological Health Dept. of Environment & Conservation Third Floor, L and C Annex 401 Church Street Nashville, TN 37243-1532 TENNESSEE VALLEY AUTHORITYDOCKET NO. 50-390WATTS BAR NUCLEAR PLANT, UNIT 1AMENDMENT TO FACILITY OPERATING LICENSE Amendment No. 61 License No. NPF-90 1.The Nuclear Regulatory Commission (the Commission) has found that:A.The application for amendment by Tennessee Valley Authority (the licensee)dated December 13, 2005, complies with the standards and requirements of the Atomic Energy Act of 1954, as amended (the Act), and the Commission's rules and regulations set forth in 10 CFR Chapter I;B.The facility will operate in conformity with the application, the provisions of theAct, and the rules and regulations of the Commission;C.There is reasonable assurance (i) that the activities authorized by thisamendment can be conducted without endangering the health and safety of the public, and (ii) that such activities will be conducted in compliance with theCommission's regulations;D.The issuance of this amendment will not be inimical to the common defense andsecurity or to the health and safety of the public; andE.The issuance of this amendment is in accordance with 10 CFR Part 51 of theCommission's regulations and all applicable requirements have been satisfied. 2.Accordingly, the license is amended by changes to the Technical Specifications asindicated in the attachment to this license amendment, and paragraph 2.C.(2) of FacilityOperating License No. NPF-90 is hereby amended to read as follows:(2)Technical Specifications and Environmental Protection PlanThe Technical Specifications contained in Appendices A and B, as revisedthrough Amendment No. 61, and the Environmental Protection Plan contained in Appendix B, both of which are attached hereto, are hereby incorporated into this license. TVA shall operate the facility in accordance with the TechnicalSpecifications and the Environmental Protection Plan.3.This license amendment is effective as of the date of its issuance, and shall beimplemented prior to entering Mode 5 upon restart from the Unit 1 Cycle 7 (U1C7) | | : 2. Safety Evaluation cc w/enclosures: See next page DISTRIBUTION: |
| Refueling Outage.FOR THE NUCLEAR REGULATORY COMMISSION/RA/Michael L. Marshall, Jr., ChiefPlant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation | | PUBLIC LPL2-2 r/f RidsOgcRp RidsAcrsAcnwMailCenter G. Hill, OIS (2) RidsNrrDorlLpl2-2 RidsNrrLACSola RidsNrrPMDPickett S. Crane, NRR RidsNrrDssSpwb RidsRgn2MailCenter RidsNrrDorlDpr RidsNrrDirsItsb Package No.: ML061280210 TS: ML061280491 ADAMS Accession No. ML060960075 *No Legal Objection NRR-058 OFFICE LPL2-2/PE LPL2-2/PM LPL2-2/LA SPWB/BC OGC LPL2-2/BC NAME SCrane:em DPickett RSola JNakoski SUttal |
| | * MMarshall DATE 04/25/06 04/24/06 04/24/06 04/26/06 05/02/06 05/05/06 |
| | |
| | OFFICIAL RECORD COPY Mr. Karl W. Singer Tennessee Valley Authority WATTS BAR NUCLEAR PLANT cc: |
| | Mr. Ashok S. Bhatnagar, Senior Vice President Mr. Glenn W. Morris, Manager Nuclear Operations Corporate Nuclear Licensing Tennessee Valley Authority and Industry Affairs 6A Lookout Place Tennessee Valley Authority 1101 Market Street 4X Blue Ridge Chattanooga, TN 37402-2801 1101 Market Street Chattanooga, TN 37402-2801 Mr. Larry S. Bryant, Vice President Nuclear Engineering & Technical Services Mr. Paul L. Pace, Manager Tennessee Valley Authority Licensing and Industry Affairs 6A Lookout Place Watts Bar Nuclear Plant 1101 Market Street Tennessee Valley Authority Chattanooga, TN 37402-2801 P.O. Box 2000 Spring City, TN 37381 Mr. Robert J. Beecken, Vice President Nuclear Support Mr. Jay Laughlin, Plant Manager Tennessee Valley Authority Watts Bar Nuclear Plant 6A Lookout Place Tennessee Valley Authority 1101 Market Street P.O. Box 2000 Chattanooga, TN 37402-2801 Spring City, TN 37381 Mr. Michael D. Skaggs Senior Resident Inspector Site Vice President Watts Bar Nuclear Plant Watts Bar Nuclear Plant U.S. Nuclear Regulatory Commission Tennessee Valley Authority 1260 Nuclear Plant Road P.O. Box 2000 Spring City, TN 37381 Spring City, TN 37381 County Executive General Counsel 375 Church Street Tennessee Valley Authority Suite 215 ET 11A Dayton, TN 37321 400 West Summit Hill Drive Knoxville, TN 37902 County Mayor P. O. Box 156 Mr. John C. Fornicola, Manager Decatur, TN 37322 Nuclear Assurance and Licensing Tennessee Valley Authority Mr. Lawrence E. Nanney, Director 6A Lookout Place Division of Radiological Health 1101 Market Street Dept. of Environment & Conservation Chattanooga, TN 37402-2801 Third Floor, L and C Annex 401 Church Street Ms. Ann P. Harris Nashville, TN 37243-1532 341 Swing Loop Road Rockwood, Tennessee 37854 |
| | |
| | TENNESSEE VALLEY AUTHORITY DOCKET NO. 50-390 WATTS BAR NUCLEAR PLANT, UNIT 1 AMENDMENT TO FACILITY OPERATING LICENSE Amendment No. 61 License No. NPF-90 |
| | : 1. The Nuclear Regulatory Commission (the Commission) has found that: |
| | A. The application for amendment by Tennessee Valley Authority (the licensee) dated December 13, 2005, complies with the standards and requirements of the Atomic Energy Act of 1954, as amended (the Act), and the Commission's rules and regulations set forth in 10 CFR Chapter I; B. The facility will operate in conformity with the application, the provisions of the Act, and the rules and regulations of the Commission; C. There is reasonable assurance (i) that the activities authorized by this amendment can be conducted without endangering the health and safety of the public, and (ii) that such activities will be conducted in compliance with the Commission's regulations; D. The issuance of this amendment will not be inimical to the common defense and security or to the health and safety of the public; and E. The issuance of this amendment is in accordance with 10 CFR Part 51 of the Commission's regulations and all applicable requirements have been satisfied. |
| | : 2. Accordingly, the license is amended by changes to the Technical Specifications as indicated in the attachment to this license amendment, and paragraph 2.C.(2) of Facility Operating License No. NPF-90 is hereby amended to read as follows: |
| | (2) Technical Specifications and Environmental Protection Plan The Technical Specifications contained in Appendices A and B, as revised through Amendment No. 61, and the Environmental Protection Plan contained in Appendix B, both of which are attached hereto, are hereby incorporated into this license. TVA shall operate the facility in accordance with the Technical Specifications and the Environmental Protection Plan. |
| | : 3. This license amendment is effective as of the date of its issuance, and shall be implemented prior to entering Mode 5 upon restart from the Unit 1 Cycle 7 (U1C7) |
| | Refueling Outage. |
| | FOR THE NUCLEAR REGULATORY COMMISSION |
| | /RA/ |
| | Michael L. Marshall, Jr., Chief Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation |
|
| |
|
| ==Attachment:== | | ==Attachment:== |
| Changes to the TechnicalSpecificationsDate of Issuance: May 5, 2006 ATTACHMENT TO LICENSE AMENDMENT NO. 61FACILITY OPERATING LICENSE NO. NPF-90DOCKET NO. 50-390Replace the following pages of the Appendix A Technical Specifications with the attachedpages. REMOVEINSERT3.4-103.4-103.4-133.4-13 3.4-143.4-14 3.4-153.4-15 SAFETY EVALUATION BY THE OFFICE OF NUCLEAR REACTOR REGULATIONRELATED TO AMENDMENT NO. 61 TO FACILITY OPERATING LICENSE NO. NPF-90TENNESSEE VALLEY AUTHORITYWATTS BAR NUCLEAR PLANT, UNIT 1DOCKET NO. 50-39 | | Changes to the Technical Specifications Date of Issuance: May 5, 2006 |
| | |
| | ATTACHMENT TO LICENSE AMENDMENT NO. 61 FACILITY OPERATING LICENSE NO. NPF-90 DOCKET NO. 50-390 Replace the following pages of the Appendix A Technical Specifications with the attached pages. |
| | REMOVE INSERT 3.4-10 3.4-10 3.4-13 3.4-13 3.4-14 3.4-14 3.4-15 3.4-15 |
| | |
| | SAFETY EVALUATION BY THE OFFICE OF NUCLEAR REACTOR REGULATION RELATED TO AMENDMENT NO. 61 TO FACILITY OPERATING LICENSE NO. NPF-90 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT, UNIT 1 DOCKET NO. 50-390 |
| | |
| | ==1.0 INTRODUCTION== |
| | |
| | By application dated December 13, 2005 (Agencywide Documents Access Management System accession number, ML053530127), Tennessee Valley Authority (the licensee) requested changes to the Technical Specifications (TSs) of the license of Watts Bar Nuclear Plant (WBN) Unit 1. Notice of this amendment request was given through the Federal Register on February 14, 2006 (71 FR 7814). |
| | The requested changes provide a revision to the WBN TSs to revise the steam generator (SG) level requirement for Limiting Condition for Operation (LCO) 3.4.7.b and Surveillance Requirements (SRs) 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to ($) 6 percent (%) |
| | to $ 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage. |
| | During the Unit 1 Cycle 7 refueling outage, the existing WBN Unit 1 Westinghouse Model D3 SGs will be replaced with Westinghouse Model 68AXP SGs. The external envelope and interfaces with existing piping and support structures for the replacement SGs (RSGs) are similar to the old (existing) Steam Generators (OSGs), except that the elevation of several RSG flow and level instrument taps (upper taps and lower narrow range taps) will increase by approximately 5 feet. The span between the upper taps and lower narrow range taps will remain approximately the same. Internally the RSGs differ from the OSGs in several ways, including increased tube surface area, different tube material, different tube supports, and longer tube length. The tube length increases from just below the lower narrow range taps in the OSGs to more than 4 feet above the lower narrow range taps in the RSGs. |
| | To support use of the RSGs, the licensee has performed numerous analyses and evaluations to determine the impact of the RSG differences. A calculation performed by Westinghouse to determine the RSG narrow range level instrument uncertainties for Emergency Operating Procedure setpoint applications identified the need to revise the TSs to increase the required percentage of SG narrow range level from 6% to 32% to ensure that the top of the tubes are covered. This change accounts for the change in relative location of the top of the tubes versus the lower narrow range taps and the narrow range water level instrument uncertainty. |
| | |
| | ==2.0 REGULATORY EVALUATION== |
| | |
| | Title 10 of the Code of Federal Regulations (10 CFR) establishes the fundamental regulatory requirements with respect to the operability of SGs, which are required for heat transfer. |
| | Specifically, the General Design Criteria (GDC) in Appendix A to 10 CFR Part 50 state that a system to transfer heat from structures, systems, and components important to safety, to an ultimate heat sink (GDC 44), and to remove residual heat shall be provided (GDC 34). |
| | Furthermore, it shall be designed with appropriate margin to assure that specified acceptable fuel design limits are not exceeded during any condition of normal operation, including the effects of anticipated operational occurrences (GDC 10). |
| | To assure SG operability, instrumentation shall be provided to monitor variables and systems over their anticipated ranges for normal operation, for anticipated operational occurrences, and for accident conditions (GDC 13). The SG narrow range level indicator is an input to the reactor protection system, which shall be designed (1) to initiate automatically the operation of appropriate systems including the reactivity control systems, to assure that specified acceptable fuel design limits are not exceeded as a result of anticipated operational occurrences and (2) to sense accident conditions and to initiate the operation of systems and components important to safety (GDC 20). Furthermore, the protection system shall assure that specified acceptable fuel design limits are not exceeded for any single malfunction of the reactivity control systems, such as accidental withdrawal (not ejection or dropout) of control rods (GDC 25). |
| | The LCOs are the lowest functional capability or performance levels of equipment required for safe operation. If the SG level were to drop below the required percentage of the narrow range SG level, the SG would not be operable and would not be able to provide certain safety functions. Therefore, the SG narrow range level is included as an LCO in the plants TSs that are regulated under 10 CFR 50.36(c)(2) Limiting conditions for operation. To ensure that the LCOs will be met, the SG level is subject to surveillance and meets the requirements of 10 CFR 50.36(c)(3) Surveillance requirements. |
| | |
| | ==3.0 TECHNICAL EVALUATION== |
| | |
| | The function of the SGs is to transfer heat produced by the fission process in the reactor core to the secondary side of the plant. To assure that the SGs are able to perform this function, the water level on the secondary side of the SG is to be maintained above the tops of SG tubes whenever the SG is required to be operable. The operability of the SGs is determined by the narrow range SG level indicator, which provides input to the reactor protection system. |
| | The basic function of the reactor protection circuits associated with the low SG water level is to preserve the SG heat sink for removal of long term residual heat. This is of particular importance during Modes 3, 4, and 5 to mitigate the consequences of an inadvertent rod withdrawal from subcritical, ejection of a control rod, or an accidental boron dilution. |
| | WBN will be replacing their SGs during the Cycle 7 refueling outage. The RSGs differ from the OSGs in that the RSG tubes are longer and the elevation of several RSG flow and level instrument taps (upper taps and lower narrow range taps) will increase by approximately 5 feet. |
| | The tube length increases from just below the lower narrow range taps in the OSGs to more than 4 feet above the lower narrow range taps in the RSGs, and therefore WBN proposes changing the required percentage of the narrow range SG level. This will ensure that the RSG |
| | |
| | level will be maintained above the top of the RSG tubes, which will demonstrate RSG operability. |
| | 3.1 Proposed Changes The proposed amendment would revise the WBN, Unit 1 TS 3.4.5, RCS Loops - MODE 3, TS 3.4.6, RCS Loops -MODE 4, and TS 3.4.7, RCS Loops - MODE 5, Loops Filled, to change the SG level requirement for LCO 3.4.7.b and SRs 3.4.5.2, 3.4.6.3, and 3.4.7.2 from $ 6% to |
| | $ 32% following replacement of the SGs. |
| | In addition, symbols (i.e., $, <, etc.) on affected pages are being spelled out as an administrative change. Revision bars are not shown for these changes. |
| | The TS changes affect the following sections: |
| | Section 3.4.5, RCS Loops - MODE 3 - Revise SR 3.4.5.2 to read: Verify steam generator secondary side water levels are greater than or equal to 32% narrow range for required RCS loops. |
| | Section 3.4.6, RCS Loops - MODE 4 - Revise SR 3.4.6.3 to read: Verify SG secondary side water levels are greater than or equal to 32% narrow range for required RCS loops. |
| | Section 3.4.7, RCS Loops- MODE 5, Loops Filled - Revise LCO 3.4.7.b to read: The secondary side water level of at least two steam generators (SGs) shall be greater than or equal to 32% narrow range. |
| | Section 3.4.7 - Revise SR 3.4.7.2 to read: Verify SG secondary side water level is greater than or equal to 32% narrow range for required SGs. |
| | In summary, the above changes revise the value of the secondary side narrow range water level from 6% for the OSGs to 32% for the RSGs. This change will assure that the secondary side water level in the RSGs is high enough to cover the tubes. |
| | 3.2 Technical Justification of Proposed TS Changes The proposed TS changes address the SG narrow range level requirements during Modes 3, 4, and 5. For SG operability, the top of the SG tubes must be covered. Since the tubes are longer in the RSGs than the OSGs, the level tap elevations are greater in the RSGs than the OSGs, and the elevation of the top of the SG tubes relative to the level taps is greater for the RSGs than the OSGs, the required percentage of the SG narrow range level would need to be revised so that the top of the RSG tubes remain covered. |
| | The licensee performed a series of calculations and analyses to determine the appropriate required percentage of the SG narrow range level for the RSGs. The SG narrow range level instrumentation uses the differential pressure between the vessel and the reference leg to determine level. This type of instrumentation is subject to errors due to density changes in the vessel contents or the reference leg. The two main sources of error are 1) pressure and temperature changes in the vessel resulting in a change in the differential pressure across the vessel and 2) a temperature change in the environment around the reference leg. |
| | |
| | To determine the required narrow range level for the RSGs (including instrument uncertainties), |
| | the process pressure uncertainty, reference leg temperature uncertainty, and narrow range level channel uncertainty were added to the minimum narrow range level without uncertainties. |
| | The result was rounded up to 32% to define an easily readable value on the indicator and add some additional conservatism. |
| | This value accounts for the change in relative location of the top of the tubes versus the lower narrow range taps and the narrow range water level instrument uncertainty. The change in the required percentage of the SG narrow range level from $ 6% to $ 32% accounts for the differences in SG design between the OSGs and RSGs and ensures the operability of the RSGs for the Mode 3, 4, and 5 accidents and transients that rely upon SG operability. The new value will be used in the same manner as the old one to assess SG operability. |
| | The proposed change in the required percentage of the SG narrow range level from $ 6% to |
| | $ 32% ensures that the RSGs are operable and available to act as a heat sink for both normal operations and anticipated operational occurrences. Furthermore, the same acceptance criteria is being used for the RSGs as was used for the OSGs, so that there is no reduction in the margin of safety. This change does not affect whether the instrumentation used to monitor SG level will be available, nor does it affect the transmission of the level signal to the reactor protection circuitry. Therefore, this change does not affect the ability of the protection system to mitigate accident and transient consequences. |
| | The proposed TS changes meet the requirements of the applicable GDCs in Appendix A to 10 CFR Part 50. In addition, since the new minimal required percentage of the SG narrow range level will be used in the same manner as the old one, it is necessary to include the new value in the LCO and SR sections of the TSs, which are regulated under 10 CFR 50.36. For these reasons, the staff finds the aforementioned TS changes acceptable. |
|
| |
|
| ==01.0 INTRODUCTION== | | ==4.0 STATE CONSULTATION== |
| By application dated December 13, 2005 (Agencywide Documents Access ManagementSystem accession number, ML053530127), Tennessee Valley Authority (the licensee) requested changes to the Technical Specifications (TSs) of the license of Watts Bar Nuclear Plant (WBN) Unit 1. Notice of this amendment request was given through the Federal Registeron February 14, 2006 (71 FR 7814).The requested changes provide a revision to the WBN TSs to revise the steam generator (SG)level requirement for Limiting Condition for Operation (LCO) 3.4.7.b and SurveillanceRequirements (SRs) 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to () 6 percent (%)
| |
| to 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage.During the Unit 1 Cycle 7 refueling outage, the existing WBN Unit 1 Westinghouse Model D3SGs will be replaced with Westinghouse Model 68AXP SGs. The external envelope andinterfaces with existing piping and support structures for the replacement SGs (RSGs) are similar to the old (existing) Steam Generators (OSGs), except that the elevation of several RSGflow and level instrument taps (upper taps and lower narrow range taps) will increase byapproximately 5 feet. The span between the upper taps and lower narrow range taps willremain approximately the same. Internally the RSGs differ from the OSGs in several ways, including increased tube surface area, different tube material, different tube supports, and longer tube length. The tube length increases from just below the lower narrow range taps inthe OSGs to more than 4 feet above the lower narrow range taps in the RSGs.To support use of the RSGs, the licensee has performed numerous analyses and evaluations todetermine the impact of the RSG differences. A calculation performed by Westinghouse to determine the RSG narrow range level instrument uncertainties for Emergency Operating Procedure setpoint applications identified the need to revise the TSs to increase the requiredpercentage of SG narrow range level from 6% to 32% to ensure that the top of the tubes arecovered. This change accounts for the change in relative location of the top of the tubes versusthe lower narrow range taps and the narrow range water level instrument uncertainty.
| |
|
| |
|
| ==2.0 REGULATORY EVALUATION==
| | In accordance with the Commission's regulations, the Tennessee State official was notified of the proposed issuance of the amendment. The State official had no comments. |
| Title 10 of the Code of Federal Regulations (10 CFR) establishes the fundamental regulatoryrequirements with respect to the operability of SGs, which are required for heat transfer. Specifically, the General Design Criteria (GDC) in Appendix A to 10 CFR Part 50 state that "a system to transfer heat from structures, systems, and components important to safety, to anultimate heat sink" (GDC 44), and "to remove residual heat shall be provided" (GDC 34).
| |
| Furthermore, it "shall be designed with appropriate margin to assure that specified acceptable fuel design limits are not exceeded during any condition of normal operation, including the effects of anticipated operational occurrences" (GDC 10). To assure SG operability, "instrumentation shall be provided to monitor variables and systemsover their anticipated ranges for normal operation, for anticipated operational occurrences, andfor accident conditions" (GDC 13). The SG narrow range level indicator is an input to the reactor protection system, which "shall be designed (1) to initiate automatically the operation ofappropriate systems including the reactivity control systems, to assure that specified acceptablefuel design limits are not exceeded as a result of anticipated operational occurrences and (2) to sense accident conditions and to initiate the operation of systems and components important tosafety" (GDC 20). Furthermore, "the protection system shall assure that specified acceptable fuel design limits are not exceeded for any single malfunction of the reactivity control systems,such as accidental withdrawal (not ejection or dropout) of control rods" (GDC 25).The LCOs are the lowest functional capability or performance levels of equipment required forsafe operation. If the SG level were to drop below the required percentage of the narrow rangeSG level, the SG would not be operable and would not be able to provide certain safety functions. Therefore, the SG narrow range level is included as an LCO in the plant's TSs that are regulated under 10 CFR 50.36(c)(2) Limiting conditions for operation. To ensure that theLCOs will be met, the SG level is subject to surveillance and meets the requirements of10 CFR 50.36(c)(3) Surveillance requirements
| |
| . | |
|
| |
|
| ==3.0TECHNICAL EVALUATION== | | ==5.0 ENVIRONMENTAL CONSIDERATION== |
| The function of the SGs is to transfer heat produced by the fission process in the reactor coreto the secondary side of the plant. To assure that the SGs are able to perform this function, the water level on the secondary side of the SG is to be maintained above the tops of SG tubeswhenever the SG is required to be operable. The operability of the SGs is determined by thenarrow range SG level indicator, which provides input to the reactor protection system.The basic function of the reactor protection circuits associated with the low SG water level is topreserve the SG heat sink for removal of long term residual heat. This is of particular importance during Modes 3, 4, and 5 to mitigate the consequences of an inadvertent rodwithdrawal from subcritical, ejection of a control rod, or an accidental boron dilution.WBN will be replacing their SGs during the Cycle 7 refueling outage. The RSGs differ from theOSGs in that the RSG tubes are longer and the elevation of several RSG flow and level instrument taps (upper taps and lower narrow range taps) will increase by approximately 5 feet. The tube length increases from just below the lower narrow range taps in the OSGs to more than 4 feet above the lower narrow range taps in the RSGs, and therefore WBN proposeschanging the required percentage of the narrow range SG level. This will ensure that the RSG level will be maintained above the top of the RSG tubes, which will demonstrate RSGoperability.3.1Proposed ChangesThe proposed amendment would revise the WBN, Unit 1 TS 3.4.5, RCS Loops - MODE 3
| |
| ,TS 3.4.6, RCS Loops -MODE 4, and TS 3.4.7, RCS Loops - MODE 5 , Loops Filled, to changethe SG level requirement for LCO 3.4.7.b and SRs 3.4.5.2, 3.4.6.3, and 3.4.7.2 from 6% to 32% following replacement of the SGs. In addition, symbols (i.e., , <, etc.) on affected pages are being spelled out as anadministrative change. Revision bars are not shown for these changes.The TS changes affect the following sections:
| |
| Section 3.4.5, RCS Loops - MODE 3 - Revise SR 3.4.5.2 to read: "Verify steam generatorsecondary side water levels are greater than or equal to 32% narrow range for required RCS loops."Section 3.4.6, RCS Loops - MODE 4 - Revise SR 3.4.6.3 to read: "Verify SG secondary sidewater levels are greater than or equal to 32% narrow range for required RCS loops."Section 3.4.7, RCS Loops- MODE 5, Loops Filled - Revise LCO 3.4.7.b to read: "Thesecondary side water level of at least two steam generators (SGs) shall be greater than or equal to 32% narrow range."Section 3.4.7 - Revise SR 3.4.7.2 to read: "Verify SG secondary side water level is greater thanor equal to 32% narrow range for required SGs."In summary, the above changes revise the value of the secondary side narrow range waterlevel from 6% for the OSGs to 32% for the RSGs. This change will assure that the secondaryside water level in the RSGs is high enough to cover the tubes.3.2Technical Justification of Proposed TS ChangesThe proposed TS changes address the SG narrow range level requirements during Modes 3, 4,and 5. For SG operability, the top of the SG tubes must be covered. Since the tubes arelonger in the RSGs than the OSGs, the level tap elevations are greater in the RSGs than theOSGs, and the elevation of the top of the SG tubes relative to the level taps is greater for theRSGs than the OSGs, the required percentage of the SG narrow range level would need to be revised so that the top of the RSG tubes remain covered.The licensee performed a series of calculations and analyses to determine the appropriate required percentage of the SG narrow range level for the RSGs. The SG narrow range level instrumentation uses the differential pressure between the vessel and the reference leg todetermine level. This type of instrumentation is subject to errors due to density changes in the vessel contents or the reference leg. The two main sources of error are 1) pressure and temperature changes in the vessel resulting in a change in the differential pressure across the vessel and 2) a temperature change in the environment around the reference leg. To determine the required narrow range level for the RSGs (including instrument uncertainties),the process pressure uncertainty, reference leg temperature uncertainty, and narrow range level channel uncertainty were added to the minimum narrow range level without uncertainties.
| |
| The result was rounded up to 32% to define an easily readable value on the indicator and add some additional conservatism. This value accounts for the change in relative location of the top of the tubes versus the lowernarrow range taps and the narrow range water level instrument uncertainty. The change in the required percentage of the SG narrow range level from 6% to 32% accounts for thedifferences in SG design between the OSGs and RSGs and ensures the operability of theRSGs for the Mode 3, 4, and 5 accidents and transients that rely upon SG operability. The newvalue will be used in the same manner as the old one to assess SG operability.The proposed change in the required percentage of the SG narrow range level from 6% to 32% ensures that the RSGs are operable and available to act as a heat sink for both normaloperations and anticipated operational occurrences. Furthermore, the same acceptance criteria is being used for the RSGs as was used for the OSGs, so that there is no reduction in the margin of safety. This change does not affect whether the instrumentation used to monitor SG level will be available, nor does it affect the transmission of the level signal to the reactorprotection circuitry. Therefore, this change does not affect the ability of the protection systemto mitigate accident and transient consequences. The proposed TS changes meet the requirements of the applicable GDCs in Appendix A to 10 CFR Part 50. In addition, since the new minimal required percentage of the SG narrow range level will be used in the same manner as the old one, it is necessary to include the newvalue in the LCO and SR sections of the TSs, which are regulated under 10 CFR 50.36. For these reasons, the staff finds the aforementioned TS changes acceptable.
| |
|
| |
|
| ==4.0 STATE CONSULTATION==
| | The amendment changes a requirement with respect to installation or use of a facility component located within the restricted area as defined in 10 CFR Part 20 and changes surveillance requirements. The NRC staff has determined that the amendment involve no significant increase in the amounts, and no significant change in the types, of any effluents that may be released offsite, and that there is no significant increase in individual or cumulative occupational radiation exposure. The Commission has previously issued a proposed finding that the amendment involve no significant hazards consideration, and there has been no public comment on such finding (71 FR 7814). Accordingly, the amendment meet the eligibility criteria for categorical exclusion set forth in 10 CFR 51.22(c)(9). Pursuant to 10 CFR 51.22(b) no environmental impact statement or environmental assessment need be prepared in connection with the issuance of the amendment. |
| In accordance with the Commission's regulations, the Tennessee State official was notified ofthe proposed issuance of the amendment. The State official had no comments.
| |
|
| |
|
| ==5.0 ENVIRONMENTAL CONSIDERATION== | | ==6.0 CONCLUSION== |
| The amendment changes a requirement with respect to installation or use of a facilitycomponent located within the restricted area as defined in 10 CFR Part 20 and changes surveillance requirements. The NRC staff has determined that the amendment involve nosignificant increase in the amounts, and no significant change in the types, of any effluents thatmay be released offsite, and that there is no significant increase in individual or cumulative occupational radiation exposure. The Commission has previously issued a proposed finding that the amendment involve no significant hazards consideration, and there has been no publiccomment on such finding (71 FR 7814). Accordingly, the amendment meet the eligibility criteriafor categorical exclusion set forth in 10 CFR 51.22(c)(9). Pursuant to 10 CFR 51.22(b) no environmental impact statement or environmental assessment need be prepared in connection with the issuance of the amendment.
| |
|
| |
|
| ==6.0 CONCLUSION==
| | The Commission has concluded, based on the considerations discussed above, that: (1) there is reasonable assurance that the health and safety of the public will not be endangered by operation in the proposed manner, (2) such activities will be conducted in compliance with the Commission's regulations, and (3) the issuance of this amendment will not be inimical to the common defense and security or to the health and safety of the public. |
| The Commission has concluded, based on the considerations discussed above, that: (1) thereis reasonable assurance that the health and safety of the public will not be endangered byoperation in the proposed manner, (2) such activities will be conducted in compliance with theCommission's regulations, and (3) the issuance of this amendment will not be inimical to thecommon defense and security or to the health and safety of the public.Principal Contributor: Samantha Crane Date: May 5, 3006}} | | Principal Contributor: Samantha Crane Date: May 5, 3006}} |
Letter Sequence Approval |
---|
|
|
MONTHYEARML0535301272005-12-13013 December 2005 Unit 1 - Proposed License Amendment Request Change No. WBN-TS-05-06 to Change the Steam Generator Secondary Side Water Level to Greater than or Equal to 321 Percent of Narrow Range Project stage: Request ML0609600752006-05-0505 May 2006 License Amendment 61 Regarding the Change in the Steam Generator Narrow-Range Level Requirements to Accommodate the Replacement Steam Generators Project stage: Approval ML0612804912006-05-0505 May 2006 Tech Spec Pages for Amendment 61, Regarding the Change in the Steam Generator Narrow-Range Level Requirements to Accommodate the Replacement Steam Generators Project stage: Other 2005-12-13
[Table View] |
|
---|
Category:Letter
MONTHYEARIR 05000390/20250102024-11-0404 November 2024 Notification of an NRC (FPTI) (NRC Inspection Report 05000390/2025010 0500039/ 2025010) (RFI) CNL-24-074, Tennessee Valley Authority - Central Emergency Control Center Emergency Plan Implementing Procedure Revisions2024-10-23023 October 2024 Tennessee Valley Authority - Central Emergency Control Center Emergency Plan Implementing Procedure Revisions IR 05000390/20243012024-10-17017 October 2024 Operator Licensing Examination Approval 05000390/2024301 and 05000391/2024301 ML24282B0412024-10-15015 October 2024 Request for Withholding Information from Public Disclosure for Sequoyah Nuclear Plant, Units 1 and 2 and Watts Bar Nuclear Plant, Units 1 and 2 ML24260A1682024-10-0404 October 2024 Regulatory Audit Summary Related to Request to Add and Revise Notes Related to Technical Specification Table 3.3.2-1, Function 5 ML24261C0062024-10-0404 October 2024 Correction to Amendment No. 134 to Facility Operating License No. NPF-90 and Amendment No. 38 to Facility Operating License No. NPF-96 ML24284A1072024-09-26026 September 2024 Affidavit for Request for Withholding Information from Public Disclosure for Sequoyah Nuclear Plant, Units 1 and 2, and Watts Bar Nuclear Plant, Units 1 and 2 CNL-24-060, Supplement to Request for Approval of the Tennessee Valley Authority Nuclear Quality Assurance Program Description2024-09-24024 September 2024 Supplement to Request for Approval of the Tennessee Valley Authority Nuclear Quality Assurance Program Description CNL-24-047, Decommitment of Flood Mode Mitigation Improvement Systems2024-09-24024 September 2024 Decommitment of Flood Mode Mitigation Improvement Systems ML24262A0602024-09-23023 September 2024 Summary of August 19, 2024, Meeting with Tennessee Valley Authority Regarding a Proposed Supplement to the Tennessee Valley Authority Nuclear Quality Assurance Plan CNL-24-065, Tennessee Valley Authority – Central Emergency Control Center Emergency Plan Implementing Procedure Revisions2024-09-18018 September 2024 Tennessee Valley Authority – Central Emergency Control Center Emergency Plan Implementing Procedure Revisions 05000390/LER-2024-002, Automatic Reactor Trip Due to Main Generator Protection Relay Actuation2024-09-0505 September 2024 Automatic Reactor Trip Due to Main Generator Protection Relay Actuation IR 05000390/20240052024-08-28028 August 2024 Updated Inspection Plan and Assessment Follow-Up Letter for Watts Bar Nuclear Plant, Units 1 and 2 - Report 05000390-2024005 and 05000391-2024005 ML24218A1442024-08-27027 August 2024 Issuance of Amendment Nos. 169 and 75 Regarding Technical Specification Surveillance Requirement 3.9.5.1 to Reduce the Residual Heat Removal Flow Rate IR 05000390/20244022024-08-20020 August 2024 – Security Baseline Inspection Report 05000390-2024402 and 05000391/2024402 - Public CNL-24-061, Supplement to Application to Revise Function 5 of Technical Specification Table 3.3.2-1, ‘Engineered Safety Feature Actuation System Instrumentation,’ for the Sequoyah and Watts Bar (SQN-TS-23-02 and WBN-TS-23-08),2024-08-19019 August 2024 Supplement to Application to Revise Function 5 of Technical Specification Table 3.3.2-1, ‘Engineered Safety Feature Actuation System Instrumentation,’ for the Sequoyah and Watts Bar (SQN-TS-23-02 and WBN-TS-23-08), ML24219A0262024-08-12012 August 2024 Request for Withholding Information from Public Disclosure IR 05000390/20240022024-08-0707 August 2024 Integrated Inspection Report 05000390/2024002 and 05000391/2024002 Rev ML24204A2652024-07-25025 July 2024 Regulatory Audit Summary Related to Request to Revise Technical Specification Surveillance Requirement 3.9.5.1 to Reduce the Residual Heat Removal Flow Rate ML24199A0012024-07-22022 July 2024 Clarification and Correction to Exemption from Requirement of 10 CFR 37.11(c)(2) ML24170A8002024-07-15015 July 2024 Issuance of Amendment Nos. 168 and 74 Regarding Revision to Technical Specification Table 1.1-1 for Required Number of Fully Tensioned Reactor Pressure Vessel Head Closure Bolts ML24172A1342024-07-15015 July 2024 Exemptions from 10 CFR 37.11(C)(2) (EPID L-2023-LLE-0024) - Letter IR 05000390/20244402024-07-12012 July 2024 95001 Supplemental Inspection Supplemental Report 05000390-2024440 and 05000391-2024440 and Follow-Up Assessment Letter 05000391/LER-2024-003, Inoperability of Both Trains of Unit 2 Low Head Safety Injection2024-07-11011 July 2024 Inoperability of Both Trains of Unit 2 Low Head Safety Injection ML24131A0012024-07-0202 July 2024 Issuance of Amendment Nos. 167 and 73 Regarding Adoption of Technical Specification Task Force Traveler TSTF-427-A, Revision 2 CNL-24-052, Response to Request for Additional Information Regarding Application to Modify the Technical Specification Surveillance Requirement 3.9.5.1 (WBN-TS-21-14)2024-06-27027 June 2024 Response to Request for Additional Information Regarding Application to Modify the Technical Specification Surveillance Requirement 3.9.5.1 (WBN-TS-21-14) CNL-24-018, License Amendment Request for Adoption of Technical Specification Task Force Traveler TSTF-276-A, Revision 2, Regarding TS 3.8.1 AC Sources – Operating to Clarify Requirements for Diesel Generator Testing (WBN-TS2024-06-25025 June 2024 License Amendment Request for Adoption of Technical Specification Task Force Traveler TSTF-276-A, Revision 2, Regarding TS 3.8.1 AC Sources – Operating to Clarify Requirements for Diesel Generator Testing (WBN-TS ML24089A1152024-06-21021 June 2024 Transmittal Letter, Environmental Assessments and Findings of No Significant Impact Related to Exemption Requests from 10 CFR 37.11(c)(2) ML24141A0482024-05-17017 May 2024 EN 56958_1 Ametek Solidstate Controls, Inc ML24100A7642024-05-16016 May 2024 Issuance of Amendment No. 166 Regarding Revision to Technical Specification 3.8.2, AC Sources-Shutdown, to Remove Reference to C-S Diesel Generator (CNL-23-062) IR 05000390/20240012024-05-14014 May 2024 Integrated Inspection Report 05000390/2024001 and 05000391/2024001 CNL-24-040, Tennessee Valley Authority - Central Emergency Control Center Emergency Plan Implementing Procedure Revisions2024-05-0808 May 2024 Tennessee Valley Authority - Central Emergency Control Center Emergency Plan Implementing Procedure Revisions 05000391/LER-2024-002, Re Automatic Reactor Trip Due to Steam Generator 3 Level LO-LO2024-05-0606 May 2024 Re Automatic Reactor Trip Due to Steam Generator 3 Level LO-LO IR 05000391/20240072024-04-30030 April 2024 Assessment Follow-up Letter for Watts Bar Nuclear Plant, Unit 2 – Report 05000391/2024007 ML24120A1182024-04-29029 April 2024 – Notification of NRC Supplemental Inspection (95001) and Request for Information CNL-24-037, Clinch River, Sequoyah, Units 1 and 2, Watts Bar, Unit 1 and 2, Nuclear Quality Assurance Plan, TVA-NQA-PLN89-A, Revision 422024-04-22022 April 2024 Clinch River, Sequoyah, Units 1 and 2, Watts Bar, Unit 1 and 2, Nuclear Quality Assurance Plan, TVA-NQA-PLN89-A, Revision 42 ML24087A1912024-04-18018 April 2024 Exemption from Select Requirements of 10 CFR Part 73, Security Notifications, Reports, and Recordkeeping and Suspicious Activity Reporting CNL-24-024, Hydrologic Engineering Center River Analysis System Project Milestone Status Update2024-04-17017 April 2024 Hydrologic Engineering Center River Analysis System Project Milestone Status Update CNL-24-010, License Amendment Request to Recapture Low-Power Testing Time (WBN-TS-23-19)2024-04-17017 April 2024 License Amendment Request to Recapture Low-Power Testing Time (WBN-TS-23-19) CNL-24-033, Central Emergency Control Center Emergency Plan Implementing Procedure Revisions2024-04-17017 April 2024 Central Emergency Control Center Emergency Plan Implementing Procedure Revisions ML24072A0052024-04-15015 April 2024 Issuance of Amendment Nos. 165 and 72 Regarding Increase in the Maximum Number of Tritium Producing Burnable Absorber Rods and Supporting Changes, and Revision to the Updated Final Safety Analysis Report CNL-24-004, Application to Modify the Watts Bar Nuclear Plant, Unit 1 and Unit 2 Technical Specifications for Main Control Room Chiller Completion Time Extension (WBN-TS-23-13)2024-04-0404 April 2024 Application to Modify the Watts Bar Nuclear Plant, Unit 1 and Unit 2 Technical Specifications for Main Control Room Chiller Completion Time Extension (WBN-TS-23-13) IR 05000390/20244012024-04-0202 April 2024 – Security Baseline Inspection Report 05000390/2024401 and 05000391/2024401 - (Public) CNL-24-020, Clinch River, Sequoyah, Units 1 and 2, Watts Bar, Units 1 and 2, Request for Approval of Quality Assurance Program Description and Application to Revise the Technical Specifications Associated with QAPD Requirements2024-04-0101 April 2024 Clinch River, Sequoyah, Units 1 and 2, Watts Bar, Units 1 and 2, Request for Approval of Quality Assurance Program Description and Application to Revise the Technical Specifications Associated with QAPD Requirements 05000391/LER-2024-001, Automatic Reactor Trip Due to Main Generator Protection Relay Actuation2024-03-27027 March 2024 Automatic Reactor Trip Due to Main Generator Protection Relay Actuation CNL-24-007, Annual Insurance Status Report2024-03-27027 March 2024 Annual Insurance Status Report CNL-24-008, Guarantee of Payment of Deferred Premiums - 2023 Annual Report2024-03-27027 March 2024 Guarantee of Payment of Deferred Premiums - 2023 Annual Report CNL-24-025, Notice of Intent to Pursue License Renewal for Watts Bar Nuclear Plant, Unit 1 - Submittal Schedule2024-03-25025 March 2024 Notice of Intent to Pursue License Renewal for Watts Bar Nuclear Plant, Unit 1 - Submittal Schedule ML24081A0262024-03-21021 March 2024 Emergency Plan Implementing Procedure Revisions ML24079A0312024-03-19019 March 2024 Wb 2024-301, Corporate Notification Letter (210-day Ltr) 2024-09-05
[Table view] Category:License-Operating (New/Renewal/Amendments) DKT 50
MONTHYEARML24218A1442024-08-27027 August 2024 Issuance of Amendment Nos. 169 and 75 Regarding Technical Specification Surveillance Requirement 3.9.5.1 to Reduce the Residual Heat Removal Flow Rate ML24170A8002024-07-15015 July 2024 Issuance of Amendment Nos. 168 and 74 Regarding Revision to Technical Specification Table 1.1-1 for Required Number of Fully Tensioned Reactor Pressure Vessel Head Closure Bolts ML24100A7642024-05-16016 May 2024 Issuance of Amendment No. 166 Regarding Revision to Technical Specification 3.8.2, AC Sources-Shutdown, to Remove Reference to C-S Diesel Generator (CNL-23-062) ML24072A0052024-04-15015 April 2024 Issuance of Amendment Nos. 165 and 72 Regarding Increase in the Maximum Number of Tritium Producing Burnable Absorber Rods and Supporting Changes, and Revision to the Updated Final Safety Analysis Report ML23319A2452024-01-29029 January 2024 Issuance of Amendment Nos. 366 and 360; 164 and 71 Regarding the Adoption of TSTF-567, Revision 1, Add Containment Sump TS to Address GSI-191 Issues ML23293A0572023-12-0606 December 2023 Issuance of Amendment Nos. 163 and 70 Regarding Adoption of TSTF-501-A, Revision 1, Relocate Stored Fuel Oil and Lube Oil Volume Values to Licensee Control ML23122A2322023-06-0707 June 2023 Issuance of Amendment Nos. 162 and 69 Regarding Change to Date in Footnotes for Technical Specification 3.7.11, Control Room Emergency Air Temperature Control System (Creatcs) ML23131A1812023-05-23023 May 2023 Correction to Amendment No. 161 to Facility Operating License No. NPF-90 ML23125A2202023-05-0505 May 2023 Issuance of Amendment No. 161 Regarding a Change to Footnotes for Technical Specification Table 1.1-1 Modes (Emergency Circumstances) ML23072A0652023-04-0505 April 2023 Units 1 and 2 – Issuance of Amendment Nos. 364 and 358; 160 and 68 Regarding a Revision to Technical Specification 3.4.12 ML22348A0052023-01-25025 January 2023 Issuance of Amendment Nos. 326, 349, and 309; 363 and 35; 159 and 67 Regarding Adoption of TSTF-554, Revise Reactor Coolant Leakage Requirements ML22349A6472023-01-20020 January 2023 Issuance of Amendment Nos. 325, 348, and 308; 362 and 356; and 158 and 66 Regarding Adoption of TSTF-529, Rev. 4, Clarify Use and Application Rules ML22271A9142022-12-0707 December 2022 Issuance of Amendment Nos. 324, 347, and 307; 360 and 354; 157 and 65 Regarding a Revision to the Emergency Action Level Scheme ML22257A0512022-11-0404 November 2022 Issuance of Amendment Nos. 156 and 64 Regarding Adoption of TSTF-205-A, Revision 3, and TSTF-563-A ML22276A1612022-10-24024 October 2022 Issuance of Amendment Nos. 359, 353, 155, & 63 Regarding Adoption of TSTF Traveler TSTF-577, Revised Frequencies for Steam Generator Tube Inspections ML22187A0192022-09-20020 September 2022 Issuance of Amendment No. 154 Regarding Revision to Technical Specification 3.3.2 to Revise Allowable Value for Trip of Turbine-Driven Main Feedwater Pumps ML22187A1812022-09-20020 September 2022 Issuance of Amendment Nos. 153 and 62 Regarding Extension of Completion Time for Technical Specification 3.7.8 for Inoperable Essential Raw Cooling Water Train ML22014A2062022-05-0404 May 2022 Issuance of Amendment Nos. 152 and 61 Regarding Revision to Technical Specifications to Delete a Redundant Unit of Measure for Certain Radiation Monitors ML21347A9672022-02-0101 February 2022 Correction of Errors Incurred During Issuance of the Initial Facility Operating License, and Issuance of License Amendment Nos. 6, 21, and 39 ML21306A2872022-01-25025 January 2022 Issuance of Amendment No. 60 Regarding Revision of Technical Specification Requirements Specific to the Model D3 Steam Generators That Will No Longer Apply Following Steam Generator Replacement ML21334A2952022-01-18018 January 2022 Issuance of Amendment No. 151 Regarding Revision to TS 3.7.12 for One-Time Exception to Permit Continuous Opening of Auxiliary Building Secondary Containment Enclosure During Unit 2 Steam Generator Replacement ML21334A3892022-01-12012 January 2022 Issuance of Amendment No. 59 Regarding Revision to Steam Generator Tube Rupture Dose Analysis ML21271A1372021-12-16016 December 2021 Issuance of Amendment Nos. 150 and 58 Regarding Modification of Technical Specification Surveillance Requirement 3.6.15.4, Shield Building ML21260A2102021-11-22022 November 2021 Issuance of Amendment No. 57 to Revise Technical Specifications to Change the Steam Generator Secondary Side Water Level ML21189A3072021-11-0303 November 2021 Issuance of Amendment Nos. 149 and 56 Regarding Modification of Technical Specification 5.7.2.19, Containment Leakage Rate Testing Program ML21158A2842021-09-17017 September 2021 Issuance of Amendment Nos. 148 and 55 to Revise Technical Specifications for Function 6.E of Table 3.3.2-1, Engineered Safety Feature Actuation System Instrumentation ML21153A0492021-07-26026 July 2021 Issuance of Amendment No. 147 Regarding Change to Steam Generator Tube Inspection Frequency and Adoption of Technical Specification Task Force (TSTF) Traveler TSTF-510 ML21161A2392021-06-24024 June 2021 Issuance of Amendment No. 54 Regarding Use of Temperature Adjustment to Voltage Growth Rate for the Generic Letter 95-05 Steam Generator Tube Repair Criteria ML21148A1002021-06-17017 June 2021 Issuance of Amendment No. 53 Regarding Neutron Fluence Calculation Methodology ML21099A2462021-05-14014 May 2021 Issuance of Amendment Nos. 146 and 52 to Adopt TSTF-490, Deletion of E Bar Definition and Revision to RCS Specific Activity Tech Spec ML21078A4842021-05-0505 May 2021 Issuance of Amendment Nos. 145 and 51 for One-Time Change to Technical Specification 3.7.11 to Extend the Completion Time for Main Control Room Chiller Modifications ML21015A0342021-03-0909 March 2021 Issuance of Amendment No. 144 Regarding Post Accident Monitoring Instrumentation ML21034A1692021-02-26026 February 2021 Issuance of Amendment Nos. 143 and 50 Regarding Implementation of Full Spectrumtm Loss-of-Coolant Accident Analysis (LOCA) and New LOCA-Specific Tritium Producing Burnable Absorber Rod Stress Analysis Methodology ML20232C6222021-02-11011 February 2021 Issuance of Amendment Nos. 142 and 49 Regarding Revision to Technical Specifications to Implement WCAP-17661-P-A, Revision 1, Improved RAOC and CAOC Fq Surveillance Technical Specifications (EPID L-2020-LLA-0037 ML21027A1672021-02-0909 February 2021 Issuance of Amendment No. 48 Regarding Use of Alternate Probability of Detection Values for Beginning of Cycle in Support of Operational Assessment ML20350B4932021-01-25025 January 2021 Issuance of Amendment Nos. 352, 346, 141, and 47 Regarding the Adoption of Technical Specification Task Force Traveler, TSTF-569, Revision 2, Revise Response Time Testing Definition ML21005A1252021-01-12012 January 2021 Correction of Errors Incurred During Issuance of License Amendment Nos. 43 and 45 ML20268A0822021-01-12012 January 2021 Issuance of Amendment Nos. 314, 337, and 297; 351 and 345; 140 and 46 Regarding Changes to the Technical Specifications ML20245E4132020-12-0808 December 2020 Issuance of Amendment Nos. 139 and 45 Regarding Revisions to Technical Specification 3.6.15, Shield Building ML20282A3452020-11-19019 November 2020 Issuance of Amendment Nos. 313, 336, 296, 350, 344, 138, and 44 Revise Emergency Plan On-Shift Emergency Medical Technician & Onsite Ambulance Requirements ML20239A7912020-10-28028 October 2020 Issuance of Amendment Nos. 137 and 43 Regarding Revision to Technical Specifications to Adopt Technical Specification Task Force Traveler 541, Revision 2 ML20226A4442020-10-21021 October 2020 Issuance of Amendment No. 42 Regarding Measurement Uncertainty Recapture Power Uprate ML20238C0612020-09-21021 September 2020 Correction of Typographical Error Incurred During Issuance of License Amendment No. 104 ML20167A1482020-08-19019 August 2020 Issuance of Amendment Nos. 136 and 41 Regarding the Automatic Transfer from a Unit Service Station Transformer to a Common Station Service Transformer ML20156A0182020-08-10010 August 2020 Issuance of Amendment No. 40 Regarding Technical Specifications for Steam Generator Tube Repair Sleeve ML20076A1942020-04-30030 April 2020 Issuance of Amendment Nos. 134 and 38 Regarding Adopting the Title 10 CFR Section 50.69, Risk-Informed Categorization and Treatment of Structures, Systems, and Components for Nuclear Power Plants ML20057E2422020-03-30030 March 2020 Issuance of Amendment Nos. 133 and 37 Regarding Changes to Technical Specifications Pertaining to Diesel Generator Start Instrumentation (EPID-L-2020-LLA-0003) ML20028F7332020-02-28028 February 2020 Issuance of Amendment Nos. 132 and 36 Regarding the Adoption of Technical Specifications Task Force Traveler TSTF-425, Revision 3 ML20024F8352020-02-24024 February 2020 Issuance of Amendment No. 35 Regarding One-Time Extension of Completion Time for Technical Specification 3.7.8 for Inoperable Essential Raw Cooling Water Train ML20015A4792020-01-30030 January 2020 Correction to Amendment No. 30 to Facility Operating License Npf-96 Regarding Use of Optimized Zirlo Fuel Rod Cladding 2024-08-27
[Table view] Category:Safety Evaluation
MONTHYEARML24218A1442024-08-27027 August 2024 Issuance of Amendment Nos. 169 and 75 Regarding Technical Specification Surveillance Requirement 3.9.5.1 to Reduce the Residual Heat Removal Flow Rate ML24170A8002024-07-15015 July 2024 Issuance of Amendment Nos. 168 and 74 Regarding Revision to Technical Specification Table 1.1-1 for Required Number of Fully Tensioned Reactor Pressure Vessel Head Closure Bolts ML24100A7642024-05-16016 May 2024 Issuance of Amendment No. 166 Regarding Revision to Technical Specification 3.8.2, AC Sources-Shutdown, to Remove Reference to C-S Diesel Generator (CNL-23-062) ML24072A0052024-04-15015 April 2024 Issuance of Amendment Nos. 165 and 72 Regarding Increase in the Maximum Number of Tritium Producing Burnable Absorber Rods and Supporting Changes, and Revision to the Updated Final Safety Analysis Report ML23319A2452024-01-29029 January 2024 Issuance of Amendment Nos. 366 and 360; 164 and 71 Regarding the Adoption of TSTF-567, Revision 1, Add Containment Sump TS to Address GSI-191 Issues ML23293A0572023-12-0606 December 2023 Issuance of Amendment Nos. 163 and 70 Regarding Adoption of TSTF-501-A, Revision 1, Relocate Stored Fuel Oil and Lube Oil Volume Values to Licensee Control ML23233A0042023-08-28028 August 2023 – Proposed Alternative to the Requirements of the ASME Boiler and Pressure Vessel Code for Upper Head Injection Dissimilar Metal Butt Welds ML23125A2202023-05-0505 May 2023 Issuance of Amendment No. 161 Regarding a Change to Footnotes for Technical Specification Table 1.1-1 Modes (Emergency Circumstances) ML23072A0652023-04-0505 April 2023 Units 1 and 2 – Issuance of Amendment Nos. 364 and 358; 160 and 68 Regarding a Revision to Technical Specification 3.4.12 ML23048A3042023-03-0808 March 2023 Tennessee Valley Authority - Request for Relief from Requirements of ASME Boiler and Pressure Vessel Code Regarding Weld Examination Coverage (EPID L-2022-LLR-0045,-0046,-0047) ML22348A0052023-01-25025 January 2023 Issuance of Amendment Nos. 326, 349, and 309; 363 and 35; 159 and 67 Regarding Adoption of TSTF-554, Revise Reactor Coolant Leakage Requirements ML22349A6472023-01-20020 January 2023 Issuance of Amendment Nos. 325, 348, and 308; 362 and 356; and 158 and 66 Regarding Adoption of TSTF-529, Rev. 4, Clarify Use and Application Rules ML22271A9142022-12-0707 December 2022 Issuance of Amendment Nos. 324, 347, and 307; 360 and 354; 157 and 65 Regarding a Revision to the Emergency Action Level Scheme ML22293A4082022-11-14014 November 2022 Revision to the Reactor Vessel Material Surveillance Capsule Withdrawal Schedule ML22257A0512022-11-0404 November 2022 Issuance of Amendment Nos. 156 and 64 Regarding Adoption of TSTF-205-A, Revision 3, and TSTF-563-A ML22276A1612022-10-24024 October 2022 Issuance of Amendment Nos. 359, 353, 155, & 63 Regarding Adoption of TSTF Traveler TSTF-577, Revised Frequencies for Steam Generator Tube Inspections ML22272A5682022-10-12012 October 2022 Authorization of Alternatives to Certain Inservice Testing Requirements in the American Society of Mechanical Engineers Operating and Maintenance Code ML22187A1812022-09-20020 September 2022 Issuance of Amendment Nos. 153 and 62 Regarding Extension of Completion Time for Technical Specification 3.7.8 for Inoperable Essential Raw Cooling Water Train ML22187A0192022-09-20020 September 2022 Issuance of Amendment No. 154 Regarding Revision to Technical Specification 3.3.2 to Revise Allowable Value for Trip of Turbine-Driven Main Feedwater Pumps ML22014A2062022-05-0404 May 2022 Issuance of Amendment Nos. 152 and 61 Regarding Revision to Technical Specifications to Delete a Redundant Unit of Measure for Certain Radiation Monitors ML22084A0012022-04-0505 April 2022 Clinch River Nuclear Site; Sequoyah Nuclear Plant, Units 1 and 2; Watts Bar Nuclear Plant, Units 1 and 2, Review of Quality Assurance Plan Changes ML22070A0022022-03-28028 March 2022 Review of the Fall 2021 Mid Cycle Generic Letter 95-05 Voltage-Based Alternate Repair Criteria Report ML21306A2872022-01-25025 January 2022 Issuance of Amendment No. 60 Regarding Revision of Technical Specification Requirements Specific to the Model D3 Steam Generators That Will No Longer Apply Following Steam Generator Replacement ML21334A2952022-01-18018 January 2022 Issuance of Amendment No. 151 Regarding Revision to TS 3.7.12 for One-Time Exception to Permit Continuous Opening of Auxiliary Building Secondary Containment Enclosure During Unit 2 Steam Generator Replacement ML21334A3892022-01-12012 January 2022 Issuance of Amendment No. 59 Regarding Revision to Steam Generator Tube Rupture Dose Analysis ML21271A1372021-12-16016 December 2021 Issuance of Amendment Nos. 150 and 58 Regarding Modification of Technical Specification Surveillance Requirement 3.6.15.4, Shield Building ML21260A2102021-11-22022 November 2021 Issuance of Amendment No. 57 to Revise Technical Specifications to Change the Steam Generator Secondary Side Water Level ML21189A3072021-11-0303 November 2021 Issuance of Amendment Nos. 149 and 56 Regarding Modification of Technical Specification 5.7.2.19, Containment Leakage Rate Testing Program ML21158A2842021-09-17017 September 2021 Issuance of Amendment Nos. 148 and 55 to Revise Technical Specifications for Function 6.E of Table 3.3.2-1, Engineered Safety Feature Actuation System Instrumentation ML21153A0492021-07-26026 July 2021 Issuance of Amendment No. 147 Regarding Change to Steam Generator Tube Inspection Frequency and Adoption of Technical Specification Task Force (TSTF) Traveler TSTF-510 ML21161A2392021-06-24024 June 2021 Issuance of Amendment No. 54 Regarding Use of Temperature Adjustment to Voltage Growth Rate for the Generic Letter 95-05 Steam Generator Tube Repair Criteria ML21148A1002021-06-17017 June 2021 Issuance of Amendment No. 53 Regarding Neutron Fluence Calculation Methodology ML21099A2462021-05-14014 May 2021 Issuance of Amendment Nos. 146 and 52 to Adopt TSTF-490, Deletion of E Bar Definition and Revision to RCS Specific Activity Tech Spec ML21130A6012021-05-13013 May 2021 Correction of Proposed Alternative IST-RR-8 to the Requirements of the ASME OM Code for the Residual Heat Removal Pump 1B-B ML21078A4842021-05-0505 May 2021 Issuance of Amendment Nos. 145 and 51 for One-Time Change to Technical Specification 3.7.11 to Extend the Completion Time for Main Control Room Chiller Modifications ML21110A0372021-04-29029 April 2021 Proposed Alternative IST-RR-8 to the Requirements of the ASME OM Code for the Residual Heat Removal Pump 1B-B ML21064A4082021-03-10010 March 2021 Correction of Safety Evaluation for License Amendment Nos. 143 and 50 (EPID L-2020-LLA-0005) (Non-Proprietary) ML21015A0342021-03-0909 March 2021 Issuance of Amendment No. 144 Regarding Post Accident Monitoring Instrumentation ML21034A1692021-02-26026 February 2021 Issuance of Amendment Nos. 143 and 50 Regarding Implementation of Full Spectrumtm Loss-of-Coolant Accident Analysis (LOCA) and New LOCA-Specific Tritium Producing Burnable Absorber Rod Stress Analysis Methodology ML20232C6222021-02-11011 February 2021 Issuance of Amendment Nos. 142 and 49 Regarding Revision to Technical Specifications to Implement WCAP-17661-P-A, Revision 1, Improved RAOC and CAOC Fq Surveillance Technical Specifications (EPID L-2020-LLA-0037 ML21027A1672021-02-0909 February 2021 Issuance of Amendment No. 48 Regarding Use of Alternate Probability of Detection Values for Beginning of Cycle in Support of Operational Assessment ML20350B4932021-01-25025 January 2021 Issuance of Amendment Nos. 352, 346, 141, and 47 Regarding the Adoption of Technical Specification Task Force Traveler, TSTF-569, Revision 2, Revise Response Time Testing Definition ML20268A0822021-01-12012 January 2021 Issuance of Amendment Nos. 314, 337, and 297; 351 and 345; 140 and 46 Regarding Changes to the Technical Specifications ML20245E4132020-12-0808 December 2020 Issuance of Amendment Nos. 139 and 45 Regarding Revisions to Technical Specification 3.6.15, Shield Building ML20282A3452020-11-19019 November 2020 Issuance of Amendment Nos. 313, 336, 296, 350, 344, 138, and 44 Revise Emergency Plan On-Shift Emergency Medical Technician & Onsite Ambulance Requirements ML20239A7912020-10-28028 October 2020 Issuance of Amendment Nos. 137 and 43 Regarding Revision to Technical Specifications to Adopt Technical Specification Task Force Traveler 541, Revision 2 ML20226A4442020-10-21021 October 2020 Issuance of Amendment No. 42 Regarding Measurement Uncertainty Recapture Power Uprate ML20167A1482020-08-19019 August 2020 Issuance of Amendment Nos. 136 and 41 Regarding the Automatic Transfer from a Unit Service Station Transformer to a Common Station Service Transformer ML20156A0182020-08-10010 August 2020 Issuance of Amendment No. 40 Regarding Technical Specifications for Steam Generator Tube Repair Sleeve ML20076A1942020-04-30030 April 2020 Issuance of Amendment Nos. 134 and 38 Regarding Adopting the Title 10 CFR Section 50.69, Risk-Informed Categorization and Treatment of Structures, Systems, and Components for Nuclear Power Plants 2024-08-27
[Table view] |
Text
May 5, 2006 Mr. Karl W. Singer Chief Nuclear Officer and Executive Vice President Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, Tennessee 37402-2801
SUBJECT:
WATTS BAR NUCLEAR PLANT, UNIT 1 ISSUANCE OF AMENDMENT REGARDING THE CHANGE IN THE STEAM GENERATOR NARROW RANGE LEVEL REQUIREMENTS TO ACCOMMODATE THE REPLACEMENT STEAM GENERATORS AT WATTS BAR NUCLEAR PLANT, UNIT 1 (TAC NO. MC9235)
Dear Mr. Singer:
The Commission has issued the enclosed Amendment No. 61 to Facility Operating License No. NPF-90 for Watts Bar Nuclear Plant (WBN), Unit 1. This amendment is in response to your application dated December 13, 2005 (WB-TS-05-06).
The amendment authorizes modification to the Technical Specifications for WBN, Unit 1 to include a change in the steam generator (SG) level requirement for Limiting Condition for Operation 3.4.7.b and Surveillance Requirements 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to ($) 6 percent (%) to $ 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage, which is currently scheduled to begin in the fall of 2006.
A copy of the safety evaluation is also enclosed. Notice of issuance will be included in the Commission's biweekly Federal Register notice.
Sincerely,
/RA/
Douglas V. Pickett, Senior Project Manager Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-390
Enclosures:
- 1. Amendment No. 61 to NPF-90
- 2. Safety Evaluation cc w/enclosures: See next page
May 5, 2006 Mr. Karl W. Singer Chief Nuclear Officer and Executive Vice President Tennessee Valley Authority 6A Lookout Place 1101 Market Street Chattanooga, Tennessee 37402-2801
SUBJECT:
WATTS BAR NUCLEAR PLANT, UNIT 1 ISSUANCE OF AMENDMENT REGARDING THE CHANGE IN THE STEAM GENERATOR NARROW RANGE LEVEL REQUIREMENTS TO ACCOMMODATE THE REPLACEMENT STEAM GENERATORS AT WATTS BAR NUCLEAR PLANT, UNIT 1 (TAC NO. MC9235)
Dear Mr. Singer:
The Commission has issued the enclosed Amendment No. 61 to Facility Operating License No. NPF-90 for Watts Bar Nuclear Plant (WBN), Unit 1. This amendment is in response to your application dated December 13, 2005 (WB-TS-05-06).
The amendment authorizes modification to the Technical Specifications for WBN, Unit 1 to include a change in the steam generator (SG) level requirement for Limiting Condition for Operation 3.4.7.b and Surveillance Requirements 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to ($) 6 percent (%) to $ 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage, which is currently scheduled to begin in the fall of 2006.
A copy of the safety evaluation is also enclosed. Notice of issuance will be included in the Commission's biweekly Federal Register notice.
Sincerely,
/RA/
Douglas V. Pickett, Senior Project Manager Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-390
Enclosures:
- 1. Amendment No. 61 to NPF-90
- 2. Safety Evaluation cc w/enclosures: See next page DISTRIBUTION:
PUBLIC LPL2-2 r/f RidsOgcRp RidsAcrsAcnwMailCenter G. Hill, OIS (2) RidsNrrDorlLpl2-2 RidsNrrLACSola RidsNrrPMDPickett S. Crane, NRR RidsNrrDssSpwb RidsRgn2MailCenter RidsNrrDorlDpr RidsNrrDirsItsb Package No.: ML061280210 TS: ML061280491 ADAMS Accession No. ML060960075 *No Legal Objection NRR-058 OFFICE LPL2-2/PE LPL2-2/PM LPL2-2/LA SPWB/BC OGC LPL2-2/BC NAME SCrane:em DPickett RSola JNakoski SUttal
- MMarshall DATE 04/25/06 04/24/06 04/24/06 04/26/06 05/02/06 05/05/06
OFFICIAL RECORD COPY Mr. Karl W. Singer Tennessee Valley Authority WATTS BAR NUCLEAR PLANT cc:
Mr. Ashok S. Bhatnagar, Senior Vice President Mr. Glenn W. Morris, Manager Nuclear Operations Corporate Nuclear Licensing Tennessee Valley Authority and Industry Affairs 6A Lookout Place Tennessee Valley Authority 1101 Market Street 4X Blue Ridge Chattanooga, TN 37402-2801 1101 Market Street Chattanooga, TN 37402-2801 Mr. Larry S. Bryant, Vice President Nuclear Engineering & Technical Services Mr. Paul L. Pace, Manager Tennessee Valley Authority Licensing and Industry Affairs 6A Lookout Place Watts Bar Nuclear Plant 1101 Market Street Tennessee Valley Authority Chattanooga, TN 37402-2801 P.O. Box 2000 Spring City, TN 37381 Mr. Robert J. Beecken, Vice President Nuclear Support Mr. Jay Laughlin, Plant Manager Tennessee Valley Authority Watts Bar Nuclear Plant 6A Lookout Place Tennessee Valley Authority 1101 Market Street P.O. Box 2000 Chattanooga, TN 37402-2801 Spring City, TN 37381 Mr. Michael D. Skaggs Senior Resident Inspector Site Vice President Watts Bar Nuclear Plant Watts Bar Nuclear Plant U.S. Nuclear Regulatory Commission Tennessee Valley Authority 1260 Nuclear Plant Road P.O. Box 2000 Spring City, TN 37381 Spring City, TN 37381 County Executive General Counsel 375 Church Street Tennessee Valley Authority Suite 215 ET 11A Dayton, TN 37321 400 West Summit Hill Drive Knoxville, TN 37902 County Mayor P. O. Box 156 Mr. John C. Fornicola, Manager Decatur, TN 37322 Nuclear Assurance and Licensing Tennessee Valley Authority Mr. Lawrence E. Nanney, Director 6A Lookout Place Division of Radiological Health 1101 Market Street Dept. of Environment & Conservation Chattanooga, TN 37402-2801 Third Floor, L and C Annex 401 Church Street Ms. Ann P. Harris Nashville, TN 37243-1532 341 Swing Loop Road Rockwood, Tennessee 37854
TENNESSEE VALLEY AUTHORITY DOCKET NO. 50-390 WATTS BAR NUCLEAR PLANT, UNIT 1 AMENDMENT TO FACILITY OPERATING LICENSE Amendment No. 61 License No. NPF-90
- 1. The Nuclear Regulatory Commission (the Commission) has found that:
A. The application for amendment by Tennessee Valley Authority (the licensee) dated December 13, 2005, complies with the standards and requirements of the Atomic Energy Act of 1954, as amended (the Act), and the Commission's rules and regulations set forth in 10 CFR Chapter I; B. The facility will operate in conformity with the application, the provisions of the Act, and the rules and regulations of the Commission; C. There is reasonable assurance (i) that the activities authorized by this amendment can be conducted without endangering the health and safety of the public, and (ii) that such activities will be conducted in compliance with the Commission's regulations; D. The issuance of this amendment will not be inimical to the common defense and security or to the health and safety of the public; and E. The issuance of this amendment is in accordance with 10 CFR Part 51 of the Commission's regulations and all applicable requirements have been satisfied.
- 2. Accordingly, the license is amended by changes to the Technical Specifications as indicated in the attachment to this license amendment, and paragraph 2.C.(2) of Facility Operating License No. NPF-90 is hereby amended to read as follows:
(2) Technical Specifications and Environmental Protection Plan The Technical Specifications contained in Appendices A and B, as revised through Amendment No. 61, and the Environmental Protection Plan contained in Appendix B, both of which are attached hereto, are hereby incorporated into this license. TVA shall operate the facility in accordance with the Technical Specifications and the Environmental Protection Plan.
- 3. This license amendment is effective as of the date of its issuance, and shall be implemented prior to entering Mode 5 upon restart from the Unit 1 Cycle 7 (U1C7)
Refueling Outage.
FOR THE NUCLEAR REGULATORY COMMISSION
/RA/
Michael L. Marshall, Jr., Chief Plant Licensing Branch II-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation
Attachment:
Changes to the Technical Specifications Date of Issuance: May 5, 2006
ATTACHMENT TO LICENSE AMENDMENT NO. 61 FACILITY OPERATING LICENSE NO. NPF-90 DOCKET NO. 50-390 Replace the following pages of the Appendix A Technical Specifications with the attached pages.
REMOVE INSERT 3.4-10 3.4-10 3.4-13 3.4-13 3.4-14 3.4-14 3.4-15 3.4-15
SAFETY EVALUATION BY THE OFFICE OF NUCLEAR REACTOR REGULATION RELATED TO AMENDMENT NO. 61 TO FACILITY OPERATING LICENSE NO. NPF-90 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT, UNIT 1 DOCKET NO. 50-390
1.0 INTRODUCTION
By application dated December 13, 2005 (Agencywide Documents Access Management System accession number, ML053530127), Tennessee Valley Authority (the licensee) requested changes to the Technical Specifications (TSs) of the license of Watts Bar Nuclear Plant (WBN) Unit 1. Notice of this amendment request was given through the Federal Register on February 14, 2006 (71 FR 7814).
The requested changes provide a revision to the WBN TSs to revise the steam generator (SG) level requirement for Limiting Condition for Operation (LCO) 3.4.7.b and Surveillance Requirements (SRs) 3.4.5.2, 3.4.6.3 and 3.4.7.2 from greater than or equal to ($) 6 percent (%)
to $ 32% following replacement of the SGs during the Unit 1, Cycle 7 refueling outage.
During the Unit 1 Cycle 7 refueling outage, the existing WBN Unit 1 Westinghouse Model D3 SGs will be replaced with Westinghouse Model 68AXP SGs. The external envelope and interfaces with existing piping and support structures for the replacement SGs (RSGs) are similar to the old (existing) Steam Generators (OSGs), except that the elevation of several RSG flow and level instrument taps (upper taps and lower narrow range taps) will increase by approximately 5 feet. The span between the upper taps and lower narrow range taps will remain approximately the same. Internally the RSGs differ from the OSGs in several ways, including increased tube surface area, different tube material, different tube supports, and longer tube length. The tube length increases from just below the lower narrow range taps in the OSGs to more than 4 feet above the lower narrow range taps in the RSGs.
To support use of the RSGs, the licensee has performed numerous analyses and evaluations to determine the impact of the RSG differences. A calculation performed by Westinghouse to determine the RSG narrow range level instrument uncertainties for Emergency Operating Procedure setpoint applications identified the need to revise the TSs to increase the required percentage of SG narrow range level from 6% to 32% to ensure that the top of the tubes are covered. This change accounts for the change in relative location of the top of the tubes versus the lower narrow range taps and the narrow range water level instrument uncertainty.
2.0 REGULATORY EVALUATION
Title 10 of the Code of Federal Regulations (10 CFR) establishes the fundamental regulatory requirements with respect to the operability of SGs, which are required for heat transfer.
Specifically, the General Design Criteria (GDC) in Appendix A to 10 CFR Part 50 state that a system to transfer heat from structures, systems, and components important to safety, to an ultimate heat sink (GDC 44), and to remove residual heat shall be provided (GDC 34).
Furthermore, it shall be designed with appropriate margin to assure that specified acceptable fuel design limits are not exceeded during any condition of normal operation, including the effects of anticipated operational occurrences (GDC 10).
To assure SG operability, instrumentation shall be provided to monitor variables and systems over their anticipated ranges for normal operation, for anticipated operational occurrences, and for accident conditions (GDC 13). The SG narrow range level indicator is an input to the reactor protection system, which shall be designed (1) to initiate automatically the operation of appropriate systems including the reactivity control systems, to assure that specified acceptable fuel design limits are not exceeded as a result of anticipated operational occurrences and (2) to sense accident conditions and to initiate the operation of systems and components important to safety (GDC 20). Furthermore, the protection system shall assure that specified acceptable fuel design limits are not exceeded for any single malfunction of the reactivity control systems, such as accidental withdrawal (not ejection or dropout) of control rods (GDC 25).
The LCOs are the lowest functional capability or performance levels of equipment required for safe operation. If the SG level were to drop below the required percentage of the narrow range SG level, the SG would not be operable and would not be able to provide certain safety functions. Therefore, the SG narrow range level is included as an LCO in the plants TSs that are regulated under 10 CFR 50.36(c)(2) Limiting conditions for operation. To ensure that the LCOs will be met, the SG level is subject to surveillance and meets the requirements of 10 CFR 50.36(c)(3) Surveillance requirements.
3.0 TECHNICAL EVALUATION
The function of the SGs is to transfer heat produced by the fission process in the reactor core to the secondary side of the plant. To assure that the SGs are able to perform this function, the water level on the secondary side of the SG is to be maintained above the tops of SG tubes whenever the SG is required to be operable. The operability of the SGs is determined by the narrow range SG level indicator, which provides input to the reactor protection system.
The basic function of the reactor protection circuits associated with the low SG water level is to preserve the SG heat sink for removal of long term residual heat. This is of particular importance during Modes 3, 4, and 5 to mitigate the consequences of an inadvertent rod withdrawal from subcritical, ejection of a control rod, or an accidental boron dilution.
WBN will be replacing their SGs during the Cycle 7 refueling outage. The RSGs differ from the OSGs in that the RSG tubes are longer and the elevation of several RSG flow and level instrument taps (upper taps and lower narrow range taps) will increase by approximately 5 feet.
The tube length increases from just below the lower narrow range taps in the OSGs to more than 4 feet above the lower narrow range taps in the RSGs, and therefore WBN proposes changing the required percentage of the narrow range SG level. This will ensure that the RSG
level will be maintained above the top of the RSG tubes, which will demonstrate RSG operability.
3.1 Proposed Changes The proposed amendment would revise the WBN, Unit 1 TS 3.4.5, RCS Loops - MODE 3, TS 3.4.6, RCS Loops -MODE 4, and TS 3.4.7, RCS Loops - MODE 5, Loops Filled, to change the SG level requirement for LCO 3.4.7.b and SRs 3.4.5.2, 3.4.6.3, and 3.4.7.2 from $ 6% to
$ 32% following replacement of the SGs.
In addition, symbols (i.e., $, <, etc.) on affected pages are being spelled out as an administrative change. Revision bars are not shown for these changes.
The TS changes affect the following sections:
Section 3.4.5, RCS Loops - MODE 3 - Revise SR 3.4.5.2 to read: Verify steam generator secondary side water levels are greater than or equal to 32% narrow range for required RCS loops.
Section 3.4.6, RCS Loops - MODE 4 - Revise SR 3.4.6.3 to read: Verify SG secondary side water levels are greater than or equal to 32% narrow range for required RCS loops.
Section 3.4.7, RCS Loops- MODE 5, Loops Filled - Revise LCO 3.4.7.b to read: The secondary side water level of at least two steam generators (SGs) shall be greater than or equal to 32% narrow range.
Section 3.4.7 - Revise SR 3.4.7.2 to read: Verify SG secondary side water level is greater than or equal to 32% narrow range for required SGs.
In summary, the above changes revise the value of the secondary side narrow range water level from 6% for the OSGs to 32% for the RSGs. This change will assure that the secondary side water level in the RSGs is high enough to cover the tubes.
3.2 Technical Justification of Proposed TS Changes The proposed TS changes address the SG narrow range level requirements during Modes 3, 4, and 5. For SG operability, the top of the SG tubes must be covered. Since the tubes are longer in the RSGs than the OSGs, the level tap elevations are greater in the RSGs than the OSGs, and the elevation of the top of the SG tubes relative to the level taps is greater for the RSGs than the OSGs, the required percentage of the SG narrow range level would need to be revised so that the top of the RSG tubes remain covered.
The licensee performed a series of calculations and analyses to determine the appropriate required percentage of the SG narrow range level for the RSGs. The SG narrow range level instrumentation uses the differential pressure between the vessel and the reference leg to determine level. This type of instrumentation is subject to errors due to density changes in the vessel contents or the reference leg. The two main sources of error are 1) pressure and temperature changes in the vessel resulting in a change in the differential pressure across the vessel and 2) a temperature change in the environment around the reference leg.
To determine the required narrow range level for the RSGs (including instrument uncertainties),
the process pressure uncertainty, reference leg temperature uncertainty, and narrow range level channel uncertainty were added to the minimum narrow range level without uncertainties.
The result was rounded up to 32% to define an easily readable value on the indicator and add some additional conservatism.
This value accounts for the change in relative location of the top of the tubes versus the lower narrow range taps and the narrow range water level instrument uncertainty. The change in the required percentage of the SG narrow range level from $ 6% to $ 32% accounts for the differences in SG design between the OSGs and RSGs and ensures the operability of the RSGs for the Mode 3, 4, and 5 accidents and transients that rely upon SG operability. The new value will be used in the same manner as the old one to assess SG operability.
The proposed change in the required percentage of the SG narrow range level from $ 6% to
$ 32% ensures that the RSGs are operable and available to act as a heat sink for both normal operations and anticipated operational occurrences. Furthermore, the same acceptance criteria is being used for the RSGs as was used for the OSGs, so that there is no reduction in the margin of safety. This change does not affect whether the instrumentation used to monitor SG level will be available, nor does it affect the transmission of the level signal to the reactor protection circuitry. Therefore, this change does not affect the ability of the protection system to mitigate accident and transient consequences.
The proposed TS changes meet the requirements of the applicable GDCs in Appendix A to 10 CFR Part 50. In addition, since the new minimal required percentage of the SG narrow range level will be used in the same manner as the old one, it is necessary to include the new value in the LCO and SR sections of the TSs, which are regulated under 10 CFR 50.36. For these reasons, the staff finds the aforementioned TS changes acceptable.
4.0 STATE CONSULTATION
In accordance with the Commission's regulations, the Tennessee State official was notified of the proposed issuance of the amendment. The State official had no comments.
5.0 ENVIRONMENTAL CONSIDERATION
The amendment changes a requirement with respect to installation or use of a facility component located within the restricted area as defined in 10 CFR Part 20 and changes surveillance requirements. The NRC staff has determined that the amendment involve no significant increase in the amounts, and no significant change in the types, of any effluents that may be released offsite, and that there is no significant increase in individual or cumulative occupational radiation exposure. The Commission has previously issued a proposed finding that the amendment involve no significant hazards consideration, and there has been no public comment on such finding (71 FR 7814). Accordingly, the amendment meet the eligibility criteria for categorical exclusion set forth in 10 CFR 51.22(c)(9). Pursuant to 10 CFR 51.22(b) no environmental impact statement or environmental assessment need be prepared in connection with the issuance of the amendment.
6.0 CONCLUSION
The Commission has concluded, based on the considerations discussed above, that: (1) there is reasonable assurance that the health and safety of the public will not be endangered by operation in the proposed manner, (2) such activities will be conducted in compliance with the Commission's regulations, and (3) the issuance of this amendment will not be inimical to the common defense and security or to the health and safety of the public.
Principal Contributor: Samantha Crane Date: May 5, 3006