ML060300405: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(StriderTol Bot change)
 
(One intermediate revision by the same user not shown)
Line 15: Line 15:


=Text=
=Text=
{{#Wiki_filter:Tennessee Valley Authority, Post Office Box 2000, Sprng City, Tennessee 37381-2000 JAN 2 5 2006 10 CFR 50.55a U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D.C. 20555-0001 Gentlemen:
{{#Wiki_filter:Tennessee Valley Authority, Post Office Box 2000, Sprng City, Tennessee 37381-2000 JAN 2 5 2006 10 CFR 50.55a U. S. Nuclear Regulatory Commission ATTN:         Document Control Desk Washington, D.C. 20555-0001 Gentlemen:
In the Matter of ) Docket No. 50-390 Tennessee Valley Authority  
In the Matter of                                           )                         Docket No. 50-390 Tennessee Valley Authority                               )
)WATTS BAR NUCLEAR PLANT (WEBN) UNIT 1 -AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) INSERVICE INSPECTION (ISI) PROGRAM REQUEST FOR RELIEF 1-ISI-16,, 1-ISI-17, 1-ISI-18 AND 1-ISI-19  
WATTS BAR NUCLEAR PLANT (WEBN) UNIT 1 - AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) INSERVICE INSPECTION (ISI) PROGRAM REQUEST FOR RELIEF 1-ISI-16,, 1-ISI-17,                                     1-ISI-18 AND 1-ISI-19


==Reference:==
==Reference:==
Watts Bar Nuclear Plant (WBN) Unit 1 - American Society Of Mechanical Engineers (ASME) Section XI Inservice Inspection (ISI) Summary Report For The Sixth Cycle Of Operation dated June 23, 2005.
The purpose of this letter Ls to request relief from ASME Section XI Code required examinations due to limitations which were identified in the WBN Unit 1 Cycle 6 Refueling Outage.
These requests for relief are being submitted in accordance with 10 CFR 50.55a(g)(5) (iii).
TVA stated in the above referenced report that four requests for relief were required to be written for components examined during the inspection and those requests would be submitted under separate letter.                        The required examination coverage could not be achieved due to configuration of a safety injection system piping weld and the configuration of several welds on the reactor vessel.. provides request: for relief 1-ISI-16 for the safety injection piping weld.                              Enclosures 2, 3 and 4 provide request for relief 1-ISI-17 through 1-ISI-19 for the reactor vessel welds.              These examinations were performed by a contract vendor as part of the 10-year ISI reactor vessel examination.
Included in Enclosures 1 through 4 are the examination data reports for the described component.                                      Enclosure 5 provides the Pared on BycWdpiw


Watts Bar Nuclear Plant (WBN) Unit 1 -American Society Of Mechanical Engineers (ASME) Section XI Inservice Inspection (ISI) Summary Report For The Sixth Cycle Of Operation dated June 23, 2005.The purpose of this letter Ls to request relief from ASME Section XI Code required examinations due to limitations which were identified in the WBN Unit 1 Cycle 6 Refueling Outage.These requests for relief are being submitted in accordance with 10 CFR 50.55a(g)(5) (iii).TVA stated in the above referenced report that four requests for relief were required to be written for components examined during the inspection and those requests would be submitted under separate letter. The required examination coverage could not be achieved due to configuration of a safety injection system piping weld and the configuration of several welds on the reactor vessel..Enclosure 1 provides request: for relief 1-ISI-16 for the safety injection piping weld. Enclosures 2, 3 and 4 provide request for relief 1-ISI-17 through 1-ISI-19 for the reactor vessel welds. These examinations were performed by a contract vendor as part of the 10-year ISI reactor vessel examination.
U.S. Nuclear Regulatory Commission Page 2
Included in Enclosures 1 through 4 are the examination data reports for the described component.
  'JAN 2 5 2006 Vendor Examination Area Coverage Report for the components described in Request for Relief 1-ISI-17 through 1-ISI-19. provides the ISI Weld Location Drawings for the components described in request for relief 1-ISI-17 through 1-ISI-19.
Enclosure 5 provides the Pared on BycWd piw U.S. Nuclear Regulatory Commission Page 2'JAN 2 5 2006 Vendor Examination Area Coverage Report for the components described in Request for Relief 1-ISI-17 through 1-ISI-19.Enclosure 6 provides the ISI Weld Location Drawings for the components described in request for relief 1-ISI-17 through 1-ISI-19.There are no regulatory commitments associated with this submittal.
There are no regulatory commitments associated with this submittal.     If you have any questions concerning this matter, please call me at (423) 365-1824.
If you have any questions concerning this matter, please call me at (423) 365-1824.Sincerely, P. .Pace Manager, Site Licensing and Industry Affairs Enclosures
Sincerely, P.   . Pace Manager, Site Licensing and Industry Affairs Enclosures
: 1. Request for Relief 1-ISI-16 for a Safety Injection System Piping Weld 2. Request for Relief 1-ISI-17 for the Reactor Vessel Bottom Head to Lower Shell Circumferential Weld and Bottom Head Cap to Bottom Head Spherical Ring Circumferential Weld 3. Request for Relief 1-ISI-18 for the Reactor Vessel Meridional Welds 4. Request for Relief I-ISI-19 for the Reactor Vessel Outlet Nozzle to Vessel Welds 5. Vendor Examination Area Coverage Report 6. ISI Weld Location Drawings cc: See Page 3 U.S. Nuclear Regulatory Commission Page 3 IJAN 2 5 2006 Enclosures cc (Enclosures):
: 1.     Request for Relief 1-ISI-16 for a Safety Injection System Piping Weld
NRC Resident Inspector Watts Bar Nuclear Plant 1260 Nuclear Plant Road Spring City, Tennessee 37381 Mr. D. V. Pickett, Senior Project Manager U.S. Nuclear Regulatory Commission MS 08G9a One White Flint North 11555 Rockville Pike Rockville, Maryland 20852-2738 U.S. Nuclear Regulatory Commission Region II Sam Nunn Atlanta Federal Center 61 Forsyth St., SW, Suite 23T85 Atlanta, Georgia 30303 ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 Summary: This request for relief addresses Safety Injection System (SIS) circumferential pipe weld, SIF-D092-15.
: 2.     Request for Relief 1-ISI-17 for the Reactor Vessel Bottom Head to Lower Shell Circumferential Weld and Bottom Head Cap to Bottom Head Spherical Ring Circumferential Weld
The design configuration of the subject austenitic piping weld provides single side access for examination.
: 3.     Request for Relief 1-ISI-18 for the Reactor Vessel Meridional Welds
Single side access precludes meeting the examination coverage and qualification demonstration requirements required by 10 CFR 50.55a(b)(2)(xv)(A) and (xvi)(B).An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations and materials of the subject weld. The design configuration and materials used limits the best effort ultrasonic examination to approximately 50 percent for tee to elbow weld, SIF-D092-15.
: 4.     Request for Relief I-ISI-19 for the Reactor Vessel Outlet Nozzle to Vessel Welds
It was concluded that performance of an ultrasonic examination of essentially 100 percent of the lower one-third of the subject circumferential pipe weld would be impractical.
: 5.     Vendor Examination Area Coverage Report
The maximum extent practical ultrasonic examination of the subject weld provides reasonable assurance of an acceptable level of quality and safety because the information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the weld. Therefore pursuant to 10 CFR 50.55a(g)(5)(iii), it is requested that relief be granted, for the first inspection interval.This request for relief is similar to a previous request, 1-ISI-15, which was submitted by WBN requesting relief to be granted for two other piping welds where code coverage could not be obtained.
: 6.     ISI Weld Location Drawings cc:     See Page 3
Request for relief, 1-ISI-15, was approved in NRC safety evaluation dated January 25, 2005 (TAC Nos. MC2368 and MC2369).System/Component(s) for Which Relief is Requested:
 
* Code Class 1, 6-inch Safety Injection System Tee to Elbow Weld.* Weld Identifier:
U.S. Nuclear Regulatory Commission Page 3 IJAN 25 2006 Enclosures cc   (Enclosures):
SIF-D092-15.
NRC Resident Inspector Watts Bar Nuclear Plant 1260 Nuclear Plant Road Spring City, Tennessee 37381 Mr. D. V. Pickett, Senior Project Manager U.S. Nuclear Regulatory Commission MS 08G9a One White Flint North 11555 Rockville Pike Rockville, Maryland 20852-2738 U.S. Nuclear Regulatory Commission Region II Sam Nunn Atlanta Federal Center 61 Forsyth St., SW, Suite 23T85 Atlanta, Georgia 30303
* Materials:
 
14-inch x 14-inch x 6-inch Tee -Schedule 140, SA-403, WP 316.* 6-inch Elbow -Schedule 140, SA-403, WP 316.Reference ISI drawing CHM-2758-C-10.
ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
El-l ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 Code Requirement:
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 Summary:
WBN's Code of Record is ASME Section XI, 1989 Edition.ASME Section XI, 1989 Edition and WCAP-14572,"Westinghouse Structural Reliability and Risk Assessment (SRRA) Model for Piping Risk Informed Inservice Inspection," Revision 1-NP-A, dated February 1999, Table 4.1-1, Examination Category R-A, Risk-Informed Piping Examinations, Item Number R1.11, Elements Subject to Thermal Fatigue, and R1.16, Elements Subject to Intergranular Stress Corrosion Cracking (IGSCC). NRC approved the use of the WCAP for WBN in NRC's safety evaluation for the Risk Informed Inservice Inspection Program dated January 24, 2002 (TAC No. MB 2082).The examination requirement is defined in ASME Section XI Figure IWB-2500-8(c).
This request for relief addresses Safety Injection System (SIS) circumferential pipe weld, SIF-D092-15.
The design configuration of the subject austenitic piping weld provides single side access for examination. Single side access precludes meeting the examination coverage and qualification demonstration requirements required by 10 CFR 50.55a(b)(2)(xv)(A) and (xvi)(B).
An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations and materials of the subject weld. The design configuration and materials used limits the best effort ultrasonic examination to approximately 50 percent for tee to elbow weld, SIF-D092-15. It was concluded that performance of an ultrasonic examination of essentially 100 percent of the lower one-third of the subject circumferential pipe weld would be impractical.
The maximum extent practical ultrasonic examination of the subject weld provides reasonable assurance of an acceptable level of quality and safety because the information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the weld. Therefore pursuant to 10 CFR 50.55a(g)(5)(iii), it is requested that relief be granted, for the first inspection interval.
This request for relief is similar to a previous request, 1-ISI-15, which was submitted by WBN requesting relief to be granted for two other piping welds where code coverage could not be obtained. Request for relief, 1-ISI-15, was approved in NRC safety evaluation dated January 25, 2005 (TAC Nos. MC2368 and MC2369).
System/Component(s) for Which Relief is Requested:
* Code Class 1, 6-inch Safety Injection System Tee to Elbow Weld.
* Weld Identifier: SIF-D092-15.
* Materials:   14-inch x 14-inch x 6-inch Tee - Schedule 140, SA-403, WP 316.
* 6-inch Elbow - Schedule 140, SA-403, WP 316.
Reference ISI drawing CHM-2758-C-10.
El-l
 
ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 Code Requirement:
WBN's Code of Record is ASME Section XI, 1989 Edition.
ASME Section XI, 1989 Edition and WCAP-14572, "Westinghouse Structural Reliability and Risk Assessment (SRRA) Model for Piping Risk Informed Inservice Inspection," Revision 1-NP-A, dated February 1999, Table 4.1-1, Examination Category R-A, Risk-Informed Piping Examinations, Item Number R1.11, Elements Subject to Thermal Fatigue, and R1.16, Elements Subject to Intergranular Stress Corrosion Cracking (IGSCC).       NRC approved the use of the WCAP for WBN in NRC's safety evaluation for the Risk Informed Inservice Inspection Program dated January 24, 2002 (TAC No. MB 2082).
The examination requirement is     defined in ASME Section XI Figure IWB-2500-8(c).
Code Requirements from Which Relief is Requested:
Code Requirements from Which Relief is Requested:
Relief is requested from the examination coverage and qualification demonstration requirements for austenitic piping welds with single side access.Basis for Relief: The 10 CFR 50.55a(b)
Relief is requested from the examination coverage and qualification demonstration requirements for austenitic piping welds with single side access.
(2) (xv) (A) requires that if access is available, the weld shall be scanned in each of the four directions (parallel and perpendicular to the weld) where accessible.
Basis for Relief:
Coverage credit may be taken for single side exams on ferritic piping. However, for austenitic piping, a procedure must be qualified with flaws on the inaccessible side of the weld. There are currently no qualified single side examination procedures for austenitic piping welds. Current technology is not capable of reliably detecting or sizing flaws on the far side of an austenitic weld for configurations common to United States nuclear applications.
The 10 CFR 50.55a(b) (2) (xv) (A) requires that if access is available, the weld shall be scanned in each of the four directions (parallel and perpendicular to the weld) where accessible.
The Performance Demonstration Initiative (PDI) Program conforms to 10 CFR 50.55a(b)
Coverage credit may be taken for single side exams on ferritic piping.       However, for austenitic piping, a procedure must be qualified with flaws on the inaccessible side of the weld.       There are currently no qualified single side examination procedures for austenitic piping welds.       Current technology is not capable of reliably detecting or sizing flaws on the far side of an austenitic weld for configurations common to United States nuclear applications.       The Performance Demonstration Initiative (PDI) Program conforms to 10 CFR 50.55a(b) (2) (xv) (A) regarding single side access for piping.
(2) (xv) (A) regarding single side access for piping.PDI Performance Demonstration Qualification Summary (PDQS) personnel certificates for austenitic piping list the limitation that single side examination is E1-2 ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 performed on a best effort basis. The best effort qualification is provided in place of a complete single side qualification to demonstrate that the examiners' qualification and the subsequent weld examination is based on application of the best available technology.
PDI Performance Demonstration Qualification Summary (PDQS) personnel certificates for austenitic piping list   the limitation that single side examination is E1-2
When the examination area is limited to one side of an austenitic weld, examination coverage does not comply with 10 CFR 50.55a(b)(2)(xvi)(B) and full coverage credit may not be claimed.The design configuration and materials used in fabrication of the subject SIS weld precludes an ultrasonic examination of the required volume because there are no current qualified single side examination procedures that demonstrate equivalency to two-sided examination procedures on austenitic piping. The design configuration and material limits ultrasonic examination to the extent indicated:
 
ASME Section XI Best Effort Coverage Weld Coverage (Note 1)SIF-D092-15 50 percent 100 percent Note 1 -Coverage does not consider the inherent limitations associated with the PDI for one side access Alternative Examinations:
ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 performed on a best effort basis. The best effort qualification is provided in place of a complete single side qualification to demonstrate that the examiners' qualification and the subsequent weld examination is based on application of the best available technology.
When the examination area is limited to one side of an austenitic weld, examination coverage does not comply with 10 CFR 50.55a(b)(2)(xvi)(B) and full coverage credit may not be claimed.
The design configuration and materials used in fabrication of the subject SIS weld precludes an ultrasonic examination of the required volume because there are no current qualified single side examination procedures that demonstrate equivalency to two-sided examination procedures on austenitic piping. The design configuration and material limits ultrasonic examination to the extent indicated:
ASME Section XI Best Effort           Coverage Weld           Coverage             (Note 1)
SIF-D092-15         50 percent         100 percent Note 1 - Coverage does not consider the inherent limitations associated with the PDI for one side access Alternative Examinations:
In lieu of the code required examination coverage and qualification demonstration requirements, a best effort ultrasonic examination was performed, as qualified through the PDI for Supplement 2 to Appendix VIII with demonstrated best effort for single side examination.
In lieu of the code required examination coverage and qualification demonstration requirements, a best effort ultrasonic examination was performed, as qualified through the PDI for Supplement 2 to Appendix VIII with demonstrated best effort for single side examination.
The ultrasonic examination resulted in no recorded indications.
The ultrasonic examination resulted in no recorded indications.     Refer to attached examination data report.
Refer to attached examination data report.Justification for the Granting of Relief: The best available techniques, as qualified through the PDI for Supplement 2 with demonstrated best effort for single side examination, were used from the accessible side of the weld.E1-3 ENCLOSURE 1 TENNESSEE:
Justification for the Granting of Relief:
VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 (1) The design configuration and materials used in the fabrication of the subject piping welds precludes ultrasonic examination of essentially 100 percent of the required examination volume.In order to examine the welds in accordance with the code requirements, the Safety Injection system would require extensive modification.
The best available techniques, as qualified through the PDI for Supplement 2 with demonstrated best effort for single side examination, were used from the accessible side of the weld.
E1-3
 
ENCLOSURE 1 TENNESSEE: VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 (1)   The design configuration and materials used in the fabrication of the subject piping welds precludes ultrasonic examination of essentially 100 percent of the required examination volume.
In order to examine the welds in accordance with the code requirements, the Safety Injection system would require extensive modification.
The design configuration and materials used limits the best effort ultrasonic examination to approximately 50 percent for tee to elbow weld, SIF-D092-15.
The design configuration and materials used limits the best effort ultrasonic examination to approximately 50 percent for tee to elbow weld, SIF-D092-15.
The subject weld was examined using application of the best available ultrasonic technology currently qualified.
The subject weld was examined using application of the best available ultrasonic technology currently qualified.
(2) Radiographic examination as an alternate volumetric examination method was determined to be impractical due the material thickness variation and the Risk Informed ISI Program (RI-ISI) requiring an extended coverage (weld plus h-inch of base material from the transition point). The radiographic density variation does not lend for compliance with ASME Section V requirements without extensive radiographic exposures to obtain the density for the base material on the fitting side. The additional radiography required would increase personnel radiation exposure.(3) A Risk Informed approach provided by WCAP-14572, Revision 1-NP-A in combination with examinations performed on similar items, provides reasonable assurance that significant degradation, if present, would have been detected.Performance of an ultrasonic volumetric examination of essentially 100 percent of the required volume of pressure retaining circumferential weld, SIF-D092-15, would be impractical.
(2) Radiographic examination as an alternate volumetric examination method was determined to be impractical due the material thickness variation and the Risk Informed ISI Program (RI-ISI) requiring an extended coverage (weld plus h-inch of base material from the transition point). The radiographic density variation does not lend for compliance with ASME Section V requirements without extensive radiographic exposures to obtain the density for the base material on the fitting side. The additional radiography required would increase personnel radiation exposure.
As previously discussed, TVA determined that it would be impractical to attempt other volumetric examinations in order to increase examination coverage.
(3) A Risk Informed approach provided by WCAP-14572, Revision 1-NP-A in combination with examinations performed on similar items, provides reasonable assurance that significant degradation, if present, would have been detected.
The maximum E1-4 ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 extent practical ultrasonic examination of the subject welds provides reasonable assurance of an acceptable level of quality and safety.Significant degradation, if present, would have been detected during the best effort ultrasonic examination that was performed on the subject welds. As a result, reasonable assurance of operational readiness has been provided.Therefore pursuant to 10CFR 50.55a(g)(5)(iii), it is requested that relief 'be granted, for the first inspection interval.Implementation Schedule: This Request for Relief is applicable to WBN's first inspection interval.
Performance of an ultrasonic volumetric examination of essentially 100 percent of the required volume of pressure retaining circumferential weld, SIF-D092-15, would be impractical. As previously discussed, TVA determined that it would be impractical to attempt other volumetric examinations in order to increase examination coverage. The maximum E1-4
The interval began May 27, 1996 and ends December 26, 2006.El-5 ENCLOSURE 1 WATTS BAR. NUCLEAR PLANT AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10 YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR. RELIEF 1-ISI-16 ATTACHMENTS Attachment 1 Attachment 2 Weld Location ISI drawing CHM-2758-C-10 Examination Data Report R0960 EIA-1  
 
-' fI L-D UYI,.a srrr-0¢51 vrr-B-rO2.  
ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
.ir-s Si-A-TO5t-0S
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 extent practical ultrasonic examination of the subject welds provides reasonable assurance of an acceptable level of quality and safety.
..\r-DDr-e--Ijj^ .j.J"5IS-2J4 I IsIJ,.06*1.i-r ir-,P-r,-"" T -f *- ' tic srr<-ro-Tf6-14 r--T FAN ROOM #1 More-1. rHE FIrrNG BETWEEN WELAS IMS A LOIIGIUDINAL Wil.KtP~T~tfN" UrTMJIV~--
Significant degradation, if present, would have been detected during the best effort ultrasonic examination that was performed on the subject welds. As a result, reasonable assurance of operational readiness has been provided.
s5 4J35* Si5. a MATERIAL spECIric~rioNs LS' CM. 250 5ULS 54 375 7W 321 11 'V "C~I'll 5VL5s 5 J7;l rP 313 21 Scm. y SOULS SA 378 TP a04 irr Ees O L At)MPlAM_
Therefore pursuant to 10CFR 50.55a(g)(5)(iii), it is requested that relief 'be granted, for the first inspection interval.
.__ ra 3 S sr-B-ToU-13 ASME CC-1< , o~t na2/ ./, feuTT 'ELP) A'(A...AtXGfI70 FLAME crOR Sr -o7 -7 5J O- --roo-DoD-OOE
Implementation Schedule:
$-IPT00 I-02E-OS -r -D 2-p15-EL. s1- O 5-07 SIF-P S t /-05' /1 fSIF-DO a-0 7 -IQlN T- TE0 2rL LL+/-4P Me \e- , L INA _ r.l 4_lz p\< S -t2 Am Il' EcURALEmr)
This Request for Relief is applicable to WBN's first inspection interval. The interval began May 27, 1996 and ends December 26, 2006.
ROO/W #4 I -I.. I .1.(D 0 (nW rfti H < Z ft H U r O l-t 0 rt.0.cn t (D t- rW F-A 5)rr. o SK ri rnf ww "Ism-~ gOAL ryu rrg,, rN.r s mafa .1VA AC 5VW rM_EE _ALE __ __, _IT_, 17ElSEEF VALLEY ArUrNlTY t1 A t -N* A s A A.1 P A A AS a .,r WAr I i Zi 6AR iYVCLtEA" ,LAM~A SAFE?? INJECIrOINM3 S JrWOLD LCA IONS SAFE -lit 05*w tr .m arrar C stm d -2 7 5 8 -C -1 O ~ Il rrrrtl CtfM-27553-C-  
El-5
?O 17 Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Attachments TENNlCSSEE VALLEY9 EXINATION SDRl l REEORTNtTfdBER:
 
TENESSE VUT"Y I AND AUTrHOlTY IRESOLUTION SHEET 06)PROJECT: WRI UNIT: I CYCLE e6 COMPONENT 1D: SW-D092-15
ENCLOSURE 1 WATTS BAR. NUCLEAR PLANT AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
_ BXAMNATION NMHOI) wYM: SS II)DWGNO:
FIRST 10 YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR. RELIEF 1-ISI-16 ATTACHMENTS     Weld Location ISI drawing CHM-2758-C-10     Examination Data Report R0960 EIA-1
CMd4758-C40 MT 0 1 PT a UT Er VT O CONFIGURATION:
 
nATEGORl PROCEDURlN-UT-64 REV 77 [ 1IA PXEL TO ?CPIPZ I O ".XAMNMR: EXCAMMER FX&WUNER A m. : SASDO PbLoSa *), 1 _ _____LEVEL. = LEVEL: LMVEL LtVEL:lTotsctoveragecaculakate0tob aDDroxIimttel  
                                                                                                                                              -         '         fI L-D         UYI,.a More-                                           KtP~T~tfN"                UrTMJIV~--
/OQ ff 6 T/I OA.vo Arp.,ji- ., w mrb I iS SrA'xiS SrerL.4S' ELtaOw To TZ45-. Elb.TUIS YrM PJrS S LE U*E CAA/ ffli Aks-snehiL  
: 1. rHE FIrrNG BETWEEN WELAS s5 4J35* Si5. a IMS A LOIIGIUDINAL Wil.
-.37s-, 2,25Smmz.
ir-,P-r,                                                                              MATERIAL                spECIric~rioNs LS' CM.        250    5ULS 54 375 7W 321
AAJHA f01ZL 2(sxvv.-)
                                                                      -""  T '-f*-   tic                                                                  11'V          "C~I'll5VL5s 5      J7;l  rP 313 srr<-ro-Tf6-14           r--T                                                                 21 Scm.        y      SOULSSA      378 TP      a04 irr                  Ees O          L (D
2mm1Z _WIU?". C,4L IRP-7' *AJ ins A AI1T C.AL aL, O.' 2J 01r A'O gai2 Dwo itibnJcAIls RXS LTTIO; BIY: ALVIZ'.VED BY: NI cj XS__ _ _ ziii______ DAME:JAk LEVEL DATE: 3/1IpS LEVELt *DT: t010$ Pag~e: .OF--5 AWMcC PO" R DOATARASE R.1WsI E1A-3 Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Attachments DIGITAL ULTRASONIC REPORT NUMBER AUTEORITY V CALIBRATION ATOIYDATA 3HERTI PROJECT E Zt e CALMBATOrD TE: I PROCDUI~~
FAN ROOM #1                                                               At)MPlAM_            .__  ra I -       I.. I .1.
N-rr-6 REV.2 T~ ~ CALIBRfATION BLOCK NOJ &ArUii* 0 *TRANSDUCER  
S    sr-B-ToU-13                                                                          ASME        CC-1 ' EcURALEmr)
-SWLTO L XANUFACTURER S/?aA ____:St27__1 DkTEC-_-_
(nW
U DIODELL Co$AP G SIN Fo J7 2 / COUPLANT:
                                                                                                                <,            o~t na2/./,                                                                                                0 feuTT                          'ELP)                            A'(A...
D*e LA E BATCEnL9o2:-eS-ANGLE VERjflCATIO
AtXGfI70 FLAME                                                                                      crOR O-                      5J Sr -o7  - 7                                                      -
__SIZE: 3 FFJQ: Z. 2SV binz RLOCKTYPEPA+/-s SN: w2-7>D SHAPE: e.b
rfti H    <    Z H        U
* zLENENTl:
                                                              -roo-DoD-OOE                                                                                                                                            ft r O
I #CONS: NONAL ANGLE: YS ACUALKN CAELETV jZI/4- I/ LENGT HLL-- -- INMNT MODE: OLONG C1RL MA-JTlFcr k7 DhI bATIC-4f05 DAC MODELNO.:
                                                                                                    $-IPT00   I-02E-OS     -         r -D 2-3                                                                                                                                                                          ROO/W      #4                                        0      rt l-t srrr-0&#xa2;51
VStS2L s:a E3OZZ6'.NSTAUr4XNT SEIrfNGS 100 R _ T EFLECOR=1 IA BCADXRECL NTC SP s NWOMEOR__ AXALJ I U dE 8_ -_ P _cxi~c -IO o tdEa-0 _ -L M1REQ MHz ./ RmJEc!- e M._I ANGLE- Y 7 deg DAbVMCG: I t'D 0 ohm 40 _ -T DELAY0- mse nuee PULSPR- SiNo-tt /*_11 _ _ ___U ZERO, S. bo_ mse/:_____ D vxLOCr-.I1-25S mitt PRRJPRg_6_ RANGE: 1.2-700 ithes TOr.. Peof 0 _ _ _ISP.MODL FUL WA4V POWER: sAr yp~g 2 V7 nohes /H-I 4 0SLAWI-E2 1 /_nOU JI RF.REFLZCTOR PfAh S GALS:5 dB:Arfrrrrmr.fi 5 .9 % S ALPAT, -f .I CALIB'IUION TIMSE>=L<<L- TIME-& riy ., -A _E .* -.. VVDi._...._ ._ .VRIUC.ONl Ml ZI)1,42 r4)A vl.# 1-Fl)~A 6 z 7)^t.4 18)p-- p) 4" EDI QUAF1IED INSTRtUVT S2TrGS: Vl:RYLVS=V&LrCSgrNGS A" CALIEATION SEQUENCE An Rf ACCORDANCE WITATBLE 2 OF ThE APPLICABLE PDI QUALJFICATION WLEMINTATION PROCEDUJRE!
                                                                                                                                                                                                                    . cn        t vrr-B-rO2.                      .                                                        p15-EL.        s1-                                   O                                                                       .0 ir-s    5-07                   t                 /-05                   SIF-P  S Si-A-TO5t-0S
E1A-4 Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Attachments TENNESSEE VALLEY DIGITAULULTRASONC lREPORT NUMBER AUTHOITY CALIRATION  
          .    .    \r-DDr-e-rr. o    SK        ri
-DATA SHEET I 0L PROJECT _w UN/MCYCLE 1/O$5 PROIEDM: &-V-U RVMV ? TC:_jA Th4MaUCZ1  
                            -Ijj
-MANUFACrUPR  
                                                    ' /1fSIF-DOa-0                                                IQlN          TE0 7 -
& Tb MODEL: riLA V SIN qqj1 SIZ: jcta d"-. 7e FR 2. z SEz.P:fteCr  
T-          -    ~    gOAL ryu rrg,,
# LEMETt.. I fCONS: f_CABUL TYPEi.) f 7Y' LZG A -MODNE: s MEAR OLONG RL DAC 4 CALIBXAlION DAT4, 1 r -o CALMRATIONDLOCKNOW&83 TEMP- 70 F SWULATOR BLCK: 7 t t7 ? 'THERM0METER S/N:5 / 7 M) DAM L 9 -O&deg;COU1A:VI-WA2
rnf ww          "Ism rN.r (D
-BATC:r ZL ANGLE VRfMCATFO; BLOCK TYPE.IVALL aw: 77 t 7?o NOINALANGLE:
s    mafa .1VA    AC 5VWrM 2rL 4_lz          S -t2                                                                            p\< LL+/-4P
60 " ACMTALAVNGLE:
              ^ .j.J"5IS-2J4            .l                                                                                                                Am Il                                                                    t- rW Me\e-, L INA    _ r                                                                      F-A I        IsIJ,.06*1.i-r 5)
_C 1NSThLRVTU
_EE __ __,
-MANUFACTRER k eA DuE DAZE:4 '- 4s MODEL NO.: USA 52 L S,.: E O 2-NSmML'NS SiElTIKGS R=ELEcroR RREFcO 11101Y SCaD1RECr.
_ALE                      _IT_,
rjTC SDH amSITLvZTy NvbnDrR AMAL h ( LB 7 CIRC. dB 100 so to 40 20 0 I )I 11IL~I II I IX A L'r 17*g FR 7 # -,MHz V AJNGLE- .deg $DELAY: O. o _be mzste ZERO: 8. ^e, xnsec VELOCrrYL._2 2 /RANGE: 35 500 inches DISP..N10DF.aFL W-AV REJZCT:- F %DAMIPKG: *0o shins-PtJLSERFL L6 *PRiRs: f IC-//TOF: Pzk POWIR:- 3 i -DITSPLAv wirD1t 3*5&deg;&deg;REJ. RlFLECTOR.
17ElSEEF     VALLEYArUrNlTY t1             A   t - N *A s A A.1           P A A AS a .,r A                WAr I i Zi 6AR SAFE??     JrWOLD       LCA IONS ,LAM~
NMF 5b Aj AMP1lTUMD.
iYVCLtEA" INJECIrOINM3            S SAFE                   -       lit   05*w 1
7 S f. MEXTAL PAYT_ ilF-M.92-3 EXUR: LVL~ An /. D EX IR ., v _4 LVL- DAI1: V s REUWER.: LvL:.M:7DATF:5 5 l1AGE 3 0r $ _te psa r.:hn C s. -r *41._ElA-5 Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Attachments TENNESSEEVALEY MANUAL ULTRASONIC REPORTNUMBER
tr
.AUTHORITY PIPIGE~XAMINATION
                                                                                                                                                  . marrar                        C     d- 2 7 5stm8- C-     O~ Il rrrrtl                         CtfM-27553-C-             ?O   17
..f DArA HEET PROJXCr: WBN UNnrJycLE 11 'f EXAMrNATION DATE- 3 / /l oS SYSTLM: Si SrART wIziE -&deg; 3- END Thvl*n WELDLD.: SIP-DO92-15
 
_ M SUSJACE OM: I9OD CONF1G.: 1F JO ?TERMLTYPE:
Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
OCS 3SS QCSCL occss FLOW SXD3WACETEBIP.:
Inservice Inspection Program Attachments TENNlCSSEE VALLEY9 EXINATION SDRl                                   l     REEORTNtTfdBER:
61 PYRO NO. 27,3 VROCDURX:
TENESSE VUT"Y                   I             AND AUTrHOlTY                   IRESOLUTION SHEET                               06)
&U~r44 REV; 7 TC: 1_ fjO? NG 45 DEG 6 0 DIG WoRREFEMNCE:
PROJECT: WRI UNIT: I                 CYCLE e6         COMPONENT 1D: SW-D092-15
vN6'tb cEvap,'i, ^ _C SCAXSXNWSTV IT 31 dJ CZ dB 14 RITMNCA: bV eA, eP L _CRCScAKsEsIvny 1 3 t dlj 9A MI INI LOPFRoMREF.
_ BXAMNATION NMHOI)                         wYM: SS         II)DWGNO: CMd4758-C40 MT 0 1 PT           a     UT Er VT O                         CONFIGURATION:                 nATEGORl PROCEDURlN-UT-64 REV 77 [                         1IA           PXEL TO ?CPIPZ                 IO    "
A T MAX AP MAX EM NOM NDATION INFOIRMATION:
              .XAMNMR: EXCAMMER                             FX&WUNER           A           m. :
No Li L L2 W MX MP MAX MAX % DAC 3 ANO. TYPE DAMP1NOETC.
SASDO   PbLoSa     *),                                           1             _ _____
_ _ __ 45 m S14.i4 b,. usf?.-'W ss4 & t' MXJ'-rp. c..JA l.~w UEMARKTUTATIONS
LEVEL.       =           LEVEL:                       LMVEL                         LtVEL:l Totsctoveragecaculakate0tob aDDroxIimttel         /OQ     ff 6 T/I     OA.vo     Arp.,ji-         .,
-a 3" Jp scb, A- prjr ba- r To_____C,-LAu AJOCSe.mA*+,pjEh to 1,b .p l# /LL I tJI r I .- -.-, LEVEL: AN1: y.XMINERV A LEYEL: DATE-LI!DE L: ;Z- DATEh: 3,D PAGE --- AOF F ACES; FORMS OA ElA-6 Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Attachments N.TVA ~~WALL THICKNESS RPTNO PROFILE SHEET PROJECT: WBAJ WELD NO: SI Fb9ZS UNIT: I ____SYSTEM:__
w       mrb I     iS SrA'xiS       SrerL.
__ ___ __ __Reomrd Thickness Measuements As Wl edRS Indicaetd.
4S' ELtaOw To TZ45-. Elb.
Inc vdino Weld Width. Cnoln ItdlgaoY dgel At r'1d 2.1 I ir S -ir11 Id -Al ~ L l.Od CROWN HIGHJOT. Fl- uS.i -DIAmITER -CROWfr WOTH: J -WELD LENQTH:-FLOW 3XMIND C REVIEWED SY-A F e4ANt bT9, 31,/ loS LEVEL% ,~ PCF-5 N wAM"M$%.SI
TUIS YrM                       S PJrSLE                                          CAA/U*Effli Aks-snehiL           37s-,-. 2,25Smmz. AAJHA       f01ZL     2(sxvv.-) 2mm1Z _
;-IU-il.44 ElA-7 ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR. RELIEF 1-ISI-17 Summary: Due to design configuration of the reactor vessel, volumetric examination of the bottom head to lower shell circumferential weld and bottom head cap t:o bottom head spherical ring circumferential weld during the Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved.
WIU?". C,4L       IRP-7'       *AJ   ins   AI1T C.AL A    aL,           O.'
The design configuration of the core barrel support lugs and lower head penetrations interferes with performance of an ultrasonic scan of these circumferential welds, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of these components is required in accordance with ASME Section XI, Table IWB-2500-1, Examination Category B-A, Item Numbers Bl.ll and B1.21. The full volume weld examination requirement is illustrated by ASME Section XI Figures IWB-2500-1 and IWBI-2500-3.
2J     01r A'O     gai2     Dwo             itibnJcAIls cj XS___                              _                            ziii RXS LTTIO; BIY:                         ALVIZ'.VED BY:                         NI
An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the welds. The design configuration limits the best effort ultrasonic examination to approximately 72 percent of the required volume of the bottom head to lower shell Circumferential Weld, W02--03, and 60 percent of the required volume of the bottom head cap to bottom head spherical ring Circumferential Weld, W01--02. The volumetric examinations resulted in no recordable indications for both of the welds.The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the circumferential welds.In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requirement due to physical restrictions.
______                                        DAME:JAk LEVEL     DATE: 3/1IpS               LEVELt                 t010$
Relief is requested from these examinations because the code requirement is impractical to implement.
                                                                  *DT:           Pag~e:     .     OF--5 AWMcCPO" R DOATARASER.1WsI E1A-3
E2-1 ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 System/Component(s) for Which Relief is Requested:
 
* Code Class 1 Reactor Pressure Vessel Circumferential Welds:-Bottom Shell to Lower Head Circumferential Weld, W02-03.-Bottom Head Spherical Ring to Bottom Cap Circumferential Weld, W01-02.Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.
Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
Inservice Inspection Program Attachments DIGITAL ULTRASONIC                           REPORT NUMBER AUTEORITY         V                           CALIBRATION ATOIYDATA                                   3HERTI PROJECT                                           E       Zt e         CALMBATOrD TE:               I N-rr-6 PROCDUI~~        REV.2           T~   ~       CALIBRfATION BLOCK NOJ &ArUii*                         0
* TRANSDUCER -                           SWLTO           L XANUFACTURER S/?aA                                                                         ____:St27__1     UDkTEC-_-_
DIODELL             Co$AP G                   SIN Fo       J7 2     /   COUPLANT: D*eLA E BATCEnL9o2:-eS
                                                                                        -ANGLE VERjflCATIO                         __
SIZE:           3                         FFJQ: Z.     2SV binz RLOCKTYPEPA+/-s                   SN:       w2-7>D SHAPE: e.b
* zLENENTl: I #CONS:                         NONAL   ANGLE:       YS       ACUALKN CAELETV                   jZI/4- I/     LENGT HLL--                                   --   INMNT MODE:                               OLONG             C1RL             MA-JTlFcr             k7           DhI bATIC-4f05 DAC                               MODELNO.:       VStS2L               s:a E3OZZ6'
                                                                                        .NSTAUr4XNT SEIrfNGS
_                       T 100
                            =1                                           IA   REFLECOR BCADXRECL     NTC SP             s             NWOMEOR
__                                                          AXALJ     I           U             dE         8
_    -                               _       P     _cxi~c   -IO           o     tdEa
_    -0                           -               L                           MHz M1REQ./ RmJEc!-             e M.
_I                                                       ANGLE-       Y7      deg     DAbVMCG: I t'D0            ohm 40   _     -                                           T     DELAY0-               nuee mse     PULSPR- SiNo-tt             /*
_11 _     _     ___U                                     ZERO, S. bo_         mse/
:_____                                                 D     vxLOCr-.I1-25S       mitt   PRRJPRg_6
_                                          RANGE:     1.2-700 ithes TOr..             Peof 0   _   _     _ISP.MODL                                                   FUL WA4V         POWER:         sAr 4
yp~g 2       V7 nohes /H-I                                                                           JI 1    /_nOU        0SLAWI-E2 RF.REFLZCTOR                   PfAhS            GALS:5           dB                     CALIB'IUION TIMSE
:Arfrrrrmr.fi
          .. VVDi 5       % .9   S   ALPAT, f       .-      I                             >=L<<L-TIME-&     riy     ., - .*A -_E VRIUC.
ONl     Ml                       ZI)1,42r4)A               6 vl.#
z   7)^t.4 18)p-- 4" p) 1-Fl)~A EDI QUAF1IED INSTRtUVT S2TrGS:
Vl:RYLVS=V&LrCSgrNGS A"                               CALIEATION SEQUENCE An RfACCORDANCE WITATBLE 2 OF ThE APPLICABLE PDI QUALJFICATION WLEMINTATION PROCEDUJRE!
E1A-4
 
Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
Inservice Inspection Program Attachments TENNESSEE VALLEY                         DIGITAULULTRASONC lREPORT NUMBER AUTHOITY                               CALIRATION                                                   -
DATA SHEET               I                   0L PROJECT _w                                               CALIBXAlION DAT4,        1 r o            -
UN/MCYCLE       1/O$5 CALMRATIONDLOCKNOW&83                          TEMP- 70 F PROIEDM: &-V-U                   RVMV ?       TC:_jA Th4MaUCZ1           -          4 SWULATOR BLCK:              7t      t7?      '
MANUFACrUPR                     & Tb                   THERM0METER S/N:5            7/        M) DAM L 9 -O&deg; MODEL:       riLA           V       SIN qqj1           COU1A:VI-WA2 -                      BATC:r              ZL ANGLE VRfMCATFO; SIZ: jcta           d"-. 7e     FR       2. z   BLOCK TYPE.IVALL aw: 77 t 7?o SEz.P:fteCr #             LEMETt.. I fCONS:         f_    NOINALANGLE: 60 "                  ACMTALAVNGLE: _C CABUL TYPEi.) f             7Y'   LZG         A     -                     1NSThLRVTU          -
MODNE:   s   MEAR           OLONG           RL MANUFACTRER            k eA              DuE DAZE:4 '-4s MODEL NO.: USA 52 L                        S,.: E O 2 DAC                                      -NSmML'NS SiElTIKGS 100                                                            R=ELEcroR                RREFcO so I            )I 11IL~                    A      SCaD1RECr. rjTC SDH amSITLvZTy 11101Y NvbnDrR AMAL                              h(    LB          7 CIRC.                                      dB to                                              L    FR        7 #      -,MHzV REJZCT:-                    F %
I          II AJNGLE-             .deg $ DAMIPKG: *0o shins-40 I IX                    'r 17 DELAY: O. o_be ZERO: 8.^e, mzste xnsec PtJLSERFL L6
* 20                                                    VELOCrrYL._2 2              / PRiRs:             f IC-//
                                                      *g RANGE: 35 500        inches TOF:                Pzk 0                                                    DISP..N10DF.aFL W-AV            POWIR:- 3 i -
DITSPLAv wirD1t          3*5&deg;&deg; REJ. RlFLECTOR. NMF 5b Aj AMP1lTUMD. 7 S      f. MEXTAL PAYT
_                                ilF-M.92- 3 EXUR:                                             LVL~                          An D      /.
EX              IR.,        v                  _4LVL-                          DAI1:         V      s REUWER.:                                         LvL:.M:7DATF:5          5 l1AGE        3           0r    $        _
te psa r.:hnC s.   -r
                  *41._
ElA-5
 
Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
Inservice Inspection Program Attachments TENNESSEEVALEY                  MANUAL ULTRASONIC                              REPORTNUMBER
      . AUTHORITY                    PIPIGE~XAMINATION                                .. f DArA HEET PROJXCr: WBN          UNnrJycLE      11            EXAMrNATION DATE-
                                                      'f                              3  / /l oS SYSTLM: Si                                          SrART wIziE &deg; 3- -                END Thvl*n WELDLD.: SIP-DO92-15                            _  M        SUSJACE      OM:      I9OD CONF1G.:    1F            JO                        ?TERMLTYPE: OCS                  3SS QCSCL occss FLOW                        SXD3WACETEBIP.: 61                PYRO NO.         27,3 VROCDURX: &U~r44 REV;           7 TC:      1_            fjO?       NG                45 DEG          6 0 DIG WoRREFEMNCE: vN6'tb cEvap,'i,      ^            _C          SCAXSXNWSTV IT              31      dJ      CZ      dB 14  RITMNCA:         bV        eP L eA,               _CRCScAKsEsIvny 1                        3t      dlj    9A      MI INI  LOPFRoMREF.      AT MAXAP          MAX EM        NOM              NDATION INFOIRMATION:
No    Li L      L2 W MX MPMAX MAX        % DAC    3      ANO.            TYPE DAMP1NOETC.
_ _    __                              45        m        S14.i4 b,.          usf?.-
                                                    'W    & t'              ss4 MXJ'-rp.              c..JA      l.~w UEMARKTUTATIONS
_____C,-LAu a      3"    Jp scb, A-      prjr ba-                      r To AJOCSe.
mA*+,pjEh        to          .p          l#
1,b    /LL I      tJI r                                                  I .-          -  .   -,
LEVEL:                                AN1:      y.
XMINERV              A                LEYEL:                                DATE-LI!DE                                  L:      ;Z-    DATEh:3,D            PAGE ---AOF F ACES; FORMS OA ElA-6
 
Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
Inservice Inspection Program Attachments TVA                    ~~WALL THICKNESS                                RPTNO PROFILE SHEET N. PROJECT:             WBAJ                            WELD NO:           SI  Fb9ZS UNIT:                   I                                        ____SYSTEM:__    __  ___  __  __
Reomrd Thickness Measuements As                                        Wl                      edRS Indicaetd. Inc vdino Weld Width.                                    Cnoln ItdlgaoY  dgel At r'1d                                  2.1 I-ir11 ir                                                  S Id -
                        ~    Al                L      l.Od CROWN HIGHJOT.           Fl-uS.i              -    DIAmITER                    -
CROWfr WOTH:               J    -WELD                       LENQTH:
                                                  -FLOW N
3XMIND C                                   REVIEWED SY-A   F         e4ANt bT9,         31,/loS                       LEVEL%           ,~               PCF-5 wAM"M$%.SI                                                                                         ;-IU-il.44 ElA-7
 
ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI)   INTERVAL REQUEST FOR. RELIEF 1-ISI-17 Summary:
Due to design configuration of the reactor vessel, volumetric examination of the bottom head to lower shell circumferential weld and bottom head cap t:o bottom head spherical ring circumferential weld during the Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved. The design configuration of the core barrel support lugs and lower head penetrations interferes with performance of an ultrasonic scan of these circumferential welds, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of these components is required in accordance with ASME Section XI, Table IWB-2500-1, Examination Category B-A, Item Numbers Bl.ll and B1.21. The full volume weld examination requirement is illustrated by ASME Section XI Figures IWB-2500-1 and IWBI-2500-3.
An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the welds. The design configuration limits the best effort ultrasonic examination to approximately 72 percent of the required volume of the bottom head to lower shell Circumferential Weld, W02--03, and 60 percent of the required volume of the bottom head cap to bottom head spherical ring Circumferential Weld, W01--02. The volumetric examinations resulted in no recordable indications for both of the welds.
The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the circumferential welds.
In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requirement due to physical restrictions. Relief is requested from these examinations because the code requirement is impractical to implement.
E2-1
 
ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 System/Component(s) for Which Relief is Requested:
* Code Class 1 Reactor Pressure Vessel Circumferential Welds:
        - Bottom Shell to Lower Head Circumferential Weld, W02-03.
        - Bottom Head Spherical Ring to Bottom Cap Circumferential Weld, W01-02.
Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.
Code Requirement:
Code Requirement:
WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-A, Item Numbers B1.ll, Reactor Vessel Circumferential Shell Weld, volumetric examination requirement as defined by Figure IWB-2500-1 and B1.21, Reactor Vessel Circumferential Head Weld, volumetric examination requirement as defined by Figure IWB-2500-3.
WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-A, Item Numbers B1.ll, Reactor Vessel Circumferential Shell Weld, volumetric examination requirement as defined by Figure IWB-2500-1 and B1.21, Reactor Vessel Circumferential Head Weld, volumetric examination requirement as defined by Figure IWB-2500-3.
Code Requirements from Which Relief is Requested:
Code Requirements from Which Relief is Requested:
Relief is requested from the volumetric examination coverage of essentially 100 percent of one reactor vessel circumferential shell weld (W02-03) and one circumferential head weld (W01-02).Basis for Relief: The design configuration of the reactor vessel precludes a complete volumetric examination of the required volume for Circumferential Shell WeVL, W02-03, and Circumferential Head Weld, W01-02. The limitation is due to the core barrel support lugs and the lower head penetrations.
Relief is requested from the volumetric examination coverage of essentially 100 percent of one reactor vessel circumferential shell weld (W02-03) and one circumferential head weld (W01-02).
The configuration limits the volumetric examination to 72 percent and 60 percent of the required volume. Refer to Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.
Basis for Relief:
The design configuration of the reactor vessel precludes a complete volumetric examination of the required volume for Circumferential Shell WeVL, W02-03, and Circumferential Head Weld, W01-02. The limitation is due to the core barrel support lugs and the lower head penetrations. The configuration limits the volumetric examination to 72 percent and 60 percent of the required volume. Refer to Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.
Alternative Examinations:
Alternative Examinations:
In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations associated with the two circumferential E2-2 ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 welds. Refer to Enclosure 2 Attachments for the examination data reports.Justification for the Granting of Relief: The design configuration cf the reactor vessel precludes ultrasonic examination of essentially 100 percent of the bottom head to lower shell Circumferential Weld, W02-03 and bottom head cap to bottom head spherical ring Circumferential Weld, W01-02. The circumferential weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT data recording/analysis systems. The target scope of the examinations included 100 percent of the accessible weld.The examination coverage requirements for these circumferential welds are discussed in Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant.Examination of the bottom head to lower shell Circumferential Weld, W02-03, is obstructed by the core barrel stabilizing lugs. The design configuration allows for ultrasonic examination of approximately 72 percent of the required volume. The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume E-F-G-H is depicted on ASME Section XI Figure IWB-2500-1. A total of six core support lugs are welded to the reactor vessel inside surface and are equally spaced circumferentially adjacent to Weld W02-03 (reference ISI drawing ISI-0427-C-06 in Enclosure 6). Each core support lug attachment is approximately 12.80 inches in width and 23.30 inches in length. Due to location of the support lugs in relation to Weld W02-03, the lugs limits two direction parallel and transverse coverage from the lug side of the circumferential weld. The support lugs restrict the ultrasonic search unit scan surface where attached to the vessel.Examination of the bottom head cap to bottom head spherical ring Circumferential Weld, W01-02, is obstructed by the bottom head penetrations.
In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations associated with the two circumferential E2-2
The design configuration allows for ultrasonic examination of approximately 60 percent of the required volume. The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, E2-3 ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEA R PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume A-B-C-D is depicted on ASME Section XI Figure IWB-2500-3.
 
A total of fifty-eight instrumentation tubes penetrate the bottom head. The bottom head penetration limits two direction parallel and transverse coverage of the circumferential weld. The penetrations restrict the ultrasonic search unit scan surface where the instrumentation tubes are near Weld W01-02.In order to examine the circumferential welds in accordance with the code requirement, the reactor vessel would require extensive modification.
ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
This modification would be impractical to implement.
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 welds. Refer to Enclosure 2 Attachments for the examination data reports.
Other examination techniques were also determined to be impractical for this configuration.
Justification for the Granting of Relief:
Reactor Vessel Circumferential Welds, W02-03 and W01-02, received limited two-directional parallel and two-directional transverse coverage.
The design configuration cf the reactor vessel precludes ultrasonic examination of essentially 100 percent of the bottom head to lower shell Circumferential Weld, W02-03 and bottom head cap to bottom head spherical ring Circumferential Weld, W01-02. The circumferential weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT data recording/analysis systems. The target scope of the examinations included 100 percent of the accessible weld.
The results of these examinations recorded no reportable indications in Welds W02-03 and W01-02.The best effort ultrasonic examination provides reasonable assurance of an acceptable!
The examination coverage requirements for these circumferential welds are discussed in Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant.
level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the circumferential welds.Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10 CFR 50.55a(g)
Examination of the bottom head to lower shell Circumferential Weld, W02-03, is obstructed by the core barrel stabilizing lugs. The design configuration allows for ultrasonic examination of approximately 72 percent of the required volume. The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume E-F-G-H is depicted on ASME Section XI Figure IWB-2500-
(5) (iii).Implementation Schedule: This request for relief is applicable to WBN's first inspection interval which began May 27, 1996 and ends December 26, 2006.E2-4 ENCLOSURE 2 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INTERVAL INSERVICE INSPECTION PROGRAM REQUEST FOR RELIEF 1-ISI-17 ATTACHMENTS
: 1. A total of six core support lugs are welded to the reactor vessel inside surface and are equally spaced circumferentially adjacent to Weld W02-03 (reference ISI drawing ISI-0427-C-06 in Enclosure 6). Each core support lug attachment is approximately 12.80 inches in width and 23.30 inches in length. Due to location of the support lugs in relation to Weld W02-03, the lugs limits two direction parallel and transverse coverage from the lug side of the circumferential weld. The support lugs restrict the ultrasonic search unit scan surface where attached to the vessel.
: 1. Examination Data Reports for Weld W01-02 2. Examination Data Reports for Weld W02-03 Pg E2A-2 Pg E2A-26 E2A-1 ISwT Examination Summary Record Paoject No, suflmmary Sheet No.: 368 Watts Bar Nuclear Plant Unit I 300028 Examination Area: Reactor Presswe Vessel LlnelAssembly:
Examination of the bottom head cap to bottom head spherical ring Circumferential Weld, W01-02, is obstructed by the bottom head penetrations. The design configuration allows for ultrasonic examination of approximately 60 percent of the required volume. The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, E2-3
Circumferential Weld WOI-02 0 Identification:
 
Botlom Head Cap to Botlom Head Spherical Ring T N ti NOE Procedure Exam R E Resolution CNF Method Rev .Chn.CN NHumberlts Exam Anal I R- Analyst Record No. Remrurs AUT ISwT-PDI-AUTINO 1-4 AUTO -AUTO for thictkness rreasuiemenm only.ICN 2 1,2 AUTSLIC40 X VM Exactiraion limired due lo lower head penetrations,*,2 AVTSS X -VI 3.4 AUT SLJC40rT X -vM 3.4 AUT55T X -vM Prepared By: / lP Ig* Summary No:l d y12-Mar-05 It OF 4 130028 h-i*0 I~j/
ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEA R PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
d _ IHSO I LI 1WESTI TEC,,HINOLOG IES AUTONMAED ULTRASONIC EXANINATION RECORD Site/Plant:
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume A-B-C-D is depicted on ASME Section XI Figure IWB-2500-3. A total of fifty-eight instrumentation tubes penetrate the bottom head. The bottom head penetration limits two direction parallel and transverse coverage of the circumferential weld. The penetrations restrict the ultrasonic search unit scan surface where the instrumentation tubes are near Weld W01-02.
Watts Bar Weld tdentilicalioo:
In order to examine the circumferential welds in accordance with the code requirement, the reactor vessel would require extensive modification. This modification would be impractical to implement. Other examination techniques were also determined to be impractical for this configuration.
RPV-WOI-02 Fro/Rey1CltjiA'H:
Reactor Vessel Circumferential Welds, W02-03 and W01-02, received limited two-directional parallel and two-directional transverse coverage. The results of these examinations recorded no reportable indications in Welds W02-03 and W01-02.
IStvT-PDI-AUII O/ L&2 Exmiato No. I Frojeet No.: 04-036S )Wedd De~eription:
The best effort ultrasonic examination provides reasonable assurance of an acceptable! level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the circumferential welds.
t Device Coan llgersili
Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10 CFR 50.55a(g) (5) (iii).
: WAr-WALCON-0001 Mud.Cenf.:
Implementation Schedule:
07A IScan Plth Drawijm8:
This request for relief is applicable to WBN's first inspection interval which began May 27, 1996 and ends December 26, 2006.
SI'-VU -02 Eanam Daltt Euiflnatil:n Time Surfac Tem perature IF Data Acquisition Operator (s) I SNT Level: Alan Schatefr t NIA 09 Mt el Start En Start End 1952 224')788.K____________.AiiIIt<  
E2-4
.... , .... .., , 4 , ,,,;- p. ...-., ;;; bi*l, 'W ihi....-.-..*... .v.............  
 
''::'v.':.:.:.
ENCLOSURE 2 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
: : Scan Controller Parnaetery tncremeot Axis Piannd_ l Actual Scan Aiis Pintailed Actu:l Poslitnal Parameters onrntoller:
FIRST 10-YEAR INTERVAL INSERVICE INSPECTION PROGRAM REQUEST FOR RELIEF 1-ISI-17 ATTACHMENTS
PaR Lower Limit 500 [ 493 I.ower Limit 2839 2839 Wain Di ctiin: Dn/L'p Scnn: 9t4o41 PiVtA 1Upper limit 153G6 1 2838 UpperLLmitt 447.1 4474 lIs:msducerSize:
: 1. Examination Data Reports for Weld W01-02       Pg E2A-2
1.1.'0 Increment:
: 2. Examination Data Reports for Weld W02-03       Pg E2A-26 E2A-1
Boont Retale Incieot batIVAJ 5.1 DCI OX_ C oe of Overhip: 10 Mode: Aultonatic Scan 1 Conversion Cowais 1uW OCim-ersion, ( ,.uvs I0. IN rmber of Scans: 335 Scan Motion: Dij-divctional tom'ersiou Unils tleUe-e- Cvon'er::iot, 1 4niu I 'tmieci Head Rotake P-ocik,. O.o Correction:
 
Dcfault IRadius In. 88.19 Radius In. S.I19 jiluiAS (Pivot Point): 324.U5 Module Parameters:
ISwT Examination Summary Record Paoject No, 368                                                       Watts Bar Nuclear Plant Unit I                                               suflmmary Sheet No.:
07A CSl Id Calibration Records: F.tsnwilsation Notrs: Status Angle Direction Scan OfFset Sttp Offset WAT-13 I Chpeh fig li nilnli.wi s '"e to the paximij,';  
300028 Examination Area:     Reactor Presswe Vessel LlnelAssembly:       Circumferential Weld WOI-02 Identification:                                                             0 Botlom Head Cap to Botlom Head Spherical Ring           T NOE           Procedure           Exam N
.hIh i lwe. h., n irannei i Un 55 ) -1.4DIii)s
R ti E           Resolution CNF Method         Rev.Chn.CN         NHumberlts   Exam Anal     I R- Analyst Record     No.                   Remrurs                             h-AUT       ISwT-PDI-AUTINO         1-4         AUTO           -
* 1 35(i) 0801301 ,ishiumiweti'.ioil Iibos Channel2 On 55 El) t 1 4Otin) I1350iro 08013112 (liannel3 On StlC40 1 -j -(_qinL I 72(i.pl 0_01303 _-Channel 4 On SU.IC 40 0 ID3 2.0tin) I.72ir _ _80l.104 Examination Remarks: Channel 5 On it. (-I 4 1(.Ljnj) '. L72.n) _ U 0130i5 I.initcd ex:aination due to the proxitiNl orthe lover head Channel 6 Off NIA NWA N/A NI/A --A i1_ iIrnFitstiodI tubes.Channel 7 Off N/A N/A N/A N/A N/A Channel 8 01f N/A N/A N/A NIA NIA Increment  
ICN 2                                                                      AUTOfor thictkness rreasuiemenm only.
& Scsn Positioms Actual Rveordaile 1idicatmnis Aua1it- Rtsmiht.Scan NoI(s) Increment Position Seami PosiLion _cs No N/A Aliatcmhcnt:  
1,2       AUTSLIC40     X       VM                     Exactiraion limired due lo lower head penetrations,
..Start Slop Start -SltOP Chaniel I U Jj U J YCs U NO Sec attachment
                                                  *,2         AVTSS     X   -   VI 3.4     AUT SLJC40rT   X   -   vM 3.4         AUT55T     X   -   vM i*
__________
0 I~j Prepared By:     /                                                   lP l d y12-Mar-05                                                                                                   Ig*            Summary It OF 4                       130028 No:
_ .__= Channel 2 L] E L: F UwIx Cl uii_ _ _ __ Channel 3 0 E [0 Rrquired:_ Cltanncl 4 0 M ( O Yes 9 No 6ChannelS 0 0 [3 Archive rs 4 elCD'..Channel 6 0 0 0 IA/B_______ ______ ______ ______ ______Channel 7 0 n. 0 Ar~i;a~s~dp':Cl' l~ _________________________
                    /
Anlyst I SNT Lzvel I Date: / /ISWT FORS I. Ur so (aw.. 0"2)W4 0 i-M 0.0 t'j CD 4 ad Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment  
 
& Scan Positions Actual Examination number 1 (Attachment)
d IHSO
Increment Positicn Scan Position Scan No.(s)Start Stop Start Stop I -24 498 1743 2839 4474 25 -57 1800 3470 2839 3277 58 -86 3579 5092 2839 3085 87 -108 5144 6280 2839 4474 109 -136 6335 7790 2839 3211 137 -180 7845 1.0167 2839 3700 181 -243 10224 13571 2839 3499 244- 276 13623 15350 2839 3133 277 -302 15401 16755 2839 4201 303 -335 16812 18538 2839 3601___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ______________
_I              1WESTI TEC,,HINOLOG IES LI AUTONMAED ULTRASONIC EXANINATION RECORD Site/Plant: Watts Bar                                               Weld tdentilicalioo: RPV-WOI-02                               Fro/Rey1CltjiA'H:           IStvT-PDI-AUII O/L&2                   Exmiato No.                   I Frojeet No.: 04-036S                                               )Wedd De~eription:           t                                 Device Coan   llgersili : WAr-WALCON- 0001 Mud.Cenf.: 07A                                                     IScan Plth Drawijm8: SI'-VU -02                                       EanamDaltt                Euiflnatil:n Time                     Surfac Tem perature IF Data Acquisition Operator (s) I SNT Level: Alan Schatefr t NIA                                                                         09 Mtel                      Start             En                 Start                 End 1952             224')788
--____________________
____________.AiiIIt<                                             ....           ,     .K                        .                                                 ...         .
-- --- ---r- ---____________
                .,       ,       4     ,     ,,,;-                     p.                 .             .                                                   .   - ., ;;;bi*l, 'W ihi....-.-..*...                       .v............. : ''::'v.':.:.:.
-2 E2A-4 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Page 1 of I -G Exari Number 1 Watts Bar Bottom Hd Wo1-02 Unit 1 Cap to Spherical iRing Cursor BOX 1 of 1 Scan Axis Inc. AXiS Depth In Material 28.50 -29.43 14.92 -19.78 2.29 -2.94 Channel 1 15.81 -20.67 31.42 -32.35 Module Inc.Scan Coordinates AXiS AXiS Feature Analysis Comments.Channel 1 Summary No Recordable Indications Channels 1, 2, 3, 4, and 5 Channel 2 15.81 -20.67 25.57 -26.50 Module Inc.Scan Coordinates AXiS AXiS Channel 3 Module Inc.Scan Coordinates Axis Axis 13.65 -18.50 31.00 -31.93 Channel 4 Module Inc.Scan Coordinates AXiS Axis 13.65 -18.50 25.95 -26.92 Channel 5 Module Inc.Scan Coordinates AXis Axis 13.65 -18.50 28 .51 -29.44 I/.//O HIN Zj9oor E2A-5 1I11 SOUTHWEST TECHNOLOGIES
Scan Controller Parnaetery                   tncremeot Axis                 Piannd_                   l     Actual         Scan Aiis                 Pintailed                 Actu:l                 Poslitnal Parameters onrntoller:                   PaR               Lower Limit                     500                     [   493             I.ower Limit               2839                   2839           Wain Di ctiin:                     Dn/L'p Scnn:                       9t4o41   PiVtA         1Upper limit                     153G6                     1 2838           UpperLLmitt               447.1                   4474         lIs:msducerSize:                       1.1.'0 Increment:                 Boont Retale             Incieot batIVAJ                 5.1                                           DCI                                                             C oe of Overhip:
'' _ AUTOMATED ULTRASONIC EXAMINATION RECORD SitePllant:
OX_                                      10 Mode:                     Aultonatic Scan           1Conversion Cowais               1uW                                           OCim-ersion, ( ,.uvs       I0.                                 IN rmber of Scans:                     335 Scan Motion:               Dij-divctional           tom'ersiou Unils                 tleUe-e-                                     Cvon'er::iot, 14niu        I 'tmieci                             Head Rotake P-ocik,.                   O.o Correction:                     Dcfault           IRadius In.                       88.19                                         Radius In.                     S.I19                           jiluiAS (Pivot Point):               324.U5 Module Parameters:                       07A           CSl Id                                                                       Calibration Records: F.tsnwilsation Notrs:
Watts liar Weld ldentllication:
Status           Angle         Direction         Scan OfFset           Sttp Offset                                 WAT-13           IChpeh fig li nilnli.wi s '"e to the paximij,';   .       ihIh lwe.nh.,                         W4 i-M irannei i             Un               55                   )             -1.4DIii)s
RPV-W0102 ProiRev/Chz1CN:
* 1 35(i)                               0801301           ,ishiumiweti'.ioil       Iibos                                                                             0.
ISwT-PDI-AUT1/0/0/1&2 Examination No.: 2 Project N.: 04-0368 Weld
0        0 Channel2               On               55             El)               t 1 4Otin)                 I1350iro                             08013112 (liannel3               On           StlC40               -j             - 1 (_qinL               72(i.pl I                                    0_01303                                     _-
Channel 4               On           SU.IC 40                               2.0tin)
ID3                        I.72ir       _ _80l.104             0                  Examination Remarks:                                                                                       t'j Channel 5               On               it.             (-I               4 1(.Ljnj)             '. L72.n)                     _     U     0130i5           I.initcd ex:aination due to the proxitiNl orthe lover head Channel 6               Off             NIA               NWA                     N/A                 NI/A                 --                   A             iIrnFitstiodI tubes.
i1_
Channel 7               Off             N/A               N/A                     N/A                 N/A                                     N/A Channel 8               01f             N/A               N/A                     N/A                 NIA                                     NIA CD 4 Increment & Scsn Positioms Actual                                       Rveordaile 1idicatmnis                                                               Aua1it- Rtsmiht.                                                               ad Scan NoI(s)         Increment Position                       Seami PosiLion _cs                                 No     N/A Aliatcmhcnt:                     ..
Start           Slop             Start   -     SltOP Chaniel I U                       Jj       U             J YCs U       NO Sec attachment __________ _                         .__=                             Channel 2 L] E                       L: FUwIx Cl uii
_ _                           _   __           Channel 3 0                 E         [0     Rrquired:
_             Cltanncl 4 0                 M       (             O Yes       9 No 0
6ChannelS       0         [3     Archive rs 4elCD'..
Channel 6         0       0         0                 IA/B
______           ______         ______Channel             7       0       n.         0     Ar~i;a~s~dp':Cl' l~         _________________________
Anlyst I SNT Lzvel I Date:                                     /               /
ISWTFORSI.       Urso (aw.. 0"2)
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 1 (Attachment)
Increment Positicn                                                 Scan Position Scan No.(s)
Start                       Stop                                 Start                       Stop I - 24                         498                         1743                                 2839                       4474 25 - 57                         1800                         3470                                 2839                       3277 58 - 86                         3579                         5092                               2839                       3085 87 - 108                         5144                         6280                               2839                       4474 109   - 136                     6335                         7790                               2839                       3211 137 - 180                       7845                         1.0167                               2839                       3700 181 - 243                       10224                         13571                               2839                       3499 244- 276                         13623                         15350                               2839                       3133 277 - 302                       15401                         16755                               2839                       4201 303 - 335                       16812                         18538                               2839                       3601
_____________                                -              - -- --- --- r- ____________________
                                                                                                                                        -2 E2A-4
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exari Number 1                                                        Page 1 of I -G Watts Bar Unit 1 Bottom Hd Cap to Spherical iRing Wo1-02 Cursor BOX 1 of 1 Scan Axis                            28.50 - 29.43 Inc. AXiS                            14.92 - 19.78 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. AXiS                            15.81    - 20.67 Scan AXiS                            31.42    - 32.35 Channel 1 Feature Analysis                            Summary Comments.
No Recordable Indications Channels 1, 2, 3, 4, and 5 Channel 2 Module Coordinates Inc. AXiS                            15.81 - 20.67 Scan AXiS                           25.57 - 26.50 Channel 3 Module Coordinates Inc. Axis                            13.65 - 18.50 Scan Axis                            31.00    -   31.93 Channel 4 Module Coordinates Inc. AXiS                            13.65    - 18.50 Scan Axis                            25.95 -     26.92 Channel 5 Module Coordinates Inc. AXis                            13.65 - 18.50 Scan Axis                            28 .51 - 29.44 I/./                      /O HIN    Zj9oor E2A-5
 
1I11 SOUTHWEST TECHNOLOGIES
            ''                           _                 AUTOMATED ULTRASONIC EXAMINATION RECORD SitePllant:       Watts liar                                       Weld ldentllication: RPV-W0102                               ProiRev/Chz1CN:           ISwT-PDI-AUT1/0/0/1&2         Examination No.:             2 Project N.: 04-0368                                               Weld


== Description:==
== Description:==
mmCqe BspbRir3-e                      Device Confilturalioa:      WAT-WALCON-0001 Mod.Conf: 07A                                                      Scan Path Drawing: SP-WO1-02                                          Exam Date                Exanuinajion Time            Surface Temperalure F Data Acquisition Operator (s) I SNT Level: Alan Schaerer I NIA 10 March 2003              Sart          End            Start                End
_                        0025          0410 L-,@.
                                                                **  -                        ** -i;C',,'t..;.''S
                                                                                                              -d* '            .    .  ,w
                                                                                                                                          - ;  .*'-K,-
Scnn Controller Parameters            Increnetl Ails                  Planned                              Actual      Scan Axis                Plansed            Actual              Positional Parameters Controllbr:                    laR            Lower Lirnit                      1S400                            18400        LowerLimit                  2839              2839      Scam Direction:                  Dn/Up San                      liionn Pivot        Upper Limit                      36598                            36598          Upper in b                4474              4474      rimidutr Siz                      1.00 litcremenl:              Bloom Rutaie        Increrent Interval                54                                              DCI                        3                          Code % of Overlap:                    I Mode:                  Aultomatic Scan        Conversion Counts                  100                                            ConversionCounts            100                        Number orScans:                    33R Scan Mtien:            I i-directional      Conversion Units                  Degrees                                        Conversion Units            Degrees Correction:                                                                                                                                                                            11Std Rotate Pesitow.              0.0(
Default          Radius In.                        88.19                                          Radius tn.                88.19                        110is (Pivot Point):            324.05 tiodule Parameters:                07A          Cal IJ                                                                        Catlibratlon Records: framinasion Notes:
Status          Angle      Direction            Scan Offset        Step Offset                                      WAT-13          Check for limitations due to the Eroximitv of the lower hiead thancI    I          On              55          (-L                  -  1.40(in)          1.35(n)                                      0801301          insrumentation tubes.                                                    C-,
Channe 2              on              55          (3)                    1.4U)(in)
                                                                        +                    1.35(in)                                    0801302                                                                                  0 Channel 3            On          SlOC 40        (.)                  - 2.00(in)            1.72(in) i 31801303                          _                __
Channel_4            On          SlM:40          14) us 4 2,00)n)          4 1.72fin)                                    0801304          Examination Remarks:
Channcl5              On              01          (i                      0.00(in) 4                  4 1.72(in)                                    11801305 Channet 6 Limited examination due to the proximity of the lower iend        us'.
Off            N/A          NI/A                      NA              N/A                                            N/A              instrumentation tube.
Channel 7            OfT            N/A          N/A                        N/A              N/A                                            N/A Channel 8            OfT            N/A          N/A                      N/A              N/A                                            N/A            Partial  examination.
Incremest    &  Scan Positlons Actual                              Recerdable Indicatioos                                                            Analyst Remarks Scan No.(5)      Incremnent Position                Sam lPnsition                        Yes            No          N/A Attchment:
c    Siat          StoP          Start              Stlp      Channel I    0                i)        0          9    Yes      LI No See Attachment                                                                  Channel 2    O                          U LI    Further F.valnqtinn
_                                    Channel 3    0                  W        O3  Required:
_Ch_                        aonnel4  o                Ei                    LI Yes [3 No
_              Channel5      0                LI        (    Archivc Tape/CD No.:
_      _            _                __                              Chanel6      0                a          0                lA/B
__    _                  Cha nne7      0                1              Analysis Tape/Cl)No            -
n Analyst I SNT Levelt Date              '                //
I_Channeld    0                                              NIA IswrfoaMrm      IJTSSne'..aSz)
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 2 (attachment)
Increment Position                    Scan Position Scan No.(s) 1 -4 Start 18403 stop
:8562 Start 2839 2839 Stop 340C 4474 4
5 - 16        18617                1.9210 17 - 47        19266                20885          2839                3205 48 - 59        20886                .1478          2839                4474 60 - 80        21534                22615          2839                4000 81 - 105        22668                23909          2839                3109 106 - 166      23963                27202          2839                4474 167  - 187      27259                28340          2839                3673 188  - 194      28390                28714          2839                4474 195  - 204      28772                59251          2839                3373 205 - 215      29312                29851          2839                3274 216 - 218      29902                30010          2839                3184 219 - 227      30067                30501          283P                4474 228 - 244      30555                31416          2839                3106 245 - 256      31467                32063          2839                4474 257 - 276      32121                33147          2839                3574 277 - 3)8      33205                35414          2839                4474 319 - 338      35465                36495          2839                37?2 E2A-7
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief l-ISI-17 Attachments Exam Number 2                                                          Page 1 oftI X Watts Bar Unit 1 Bottom Hd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis                              30.78 - 31.71 Inc. Axis                            193.92 - 198.78 Depth In Material                        2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                            194.80 - 199.66 Scan Axis                              33.70 - 34.63 Channel 1 Feature Analysis                              Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc - Axis                            194.80 - 199.66 Scan Axis                              27.85 -    28.78 Channel 3 Module Coordinates Inc. Axis                            192.64 - 197.50 Scan Axis                              33.2B - 34.21 Channel 4 Module Coordinates Inc. Axis                            192.64 -    197.50 Scan Axis                              28.27 -    29.20 Channel 5 Module Coordinates Inc. Axis                            192.64 - 197.50 Scan Axis                              30.79 - 31.72
            //./? A4099-          Leez -      /&deg; W'eC Sta&-
E2A-8


mmCqe BspbRir3-e Device Confilturalioa:
                                                                        ,H1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:  Waits lint                                  Wedd identincatlbn: RI'V.WOI-02                      PralRev/ChgfICN:        ISwT-PDI.AUTIi/OC`1&2          Examination No.:             2a 1
WAT-WALCON-0001 Mod.Conf:
ProlectNo.: 04-0368                                      WetdDescripiieon: _mrc akHspz.b(tsr-wl              DeviceConfieurateiu      WAT-WAiCON-0001 Mod.Conf.: 07A                                          JScan Path Drawing: SPWDI0-02                              Exam Date              EIxaml ation Time              Surface Temperature IF Data Acquisition (Operator (s) I SNT Level: Alan Sthaefer NIA                                                      10 March 2005            Start          End            Star                End Scan Controller Parameters        Increment Asis                Planned                    Actual      Scan Axis              Planned            Actual              Positional Paramiteer t.ontrollcr.             PaR            Lower Limit                    1_400      _          36326        Lowerlimit              2839              2839      Ream Direction:                   DorUp Scan:                Room PFiv,          Upper Lirht.                    3659S                  1659          lIpperliitt              4474              3172      rransducer Si7e:                    1.00 Increment:          Ioon, Rotate        Incremcnt Interval             54                                   DUI                      3                           Code % orOveap:                       10 Modc:             Automatic Scan       Conversion Counts               100                                 Conversimn Counts        100                       Number of Scans:                     338 Scan Motion:       Ri-directional     C(onversion Units               Degrees                             Conversion Units         Degrees                     Rtcad Rotatt Position:              0.00 eauhlt DCorection      Radius IrL                      88.19                               Radius In.               88.19                       tlolst(Pivot Point):             324.05 ModuleParameters:               07A       Cal 13                                                              Calibration Records, INxamiati          oter:
07A Scan Path Drawing: SP-WO1-02 Exam Date Exanuinajion Time Surface Temperalure F Data Acquisition Operator (s) I SNT Level: Alan Schaerer I NIA 10 March 2003 Sart End Start End_ 0025 0410 L -,@. ** -** -i;C',,'t..;.''S -d* ' ..,w ; -.*'-K,-Scnn Controller Parameters Increnetl Ails Planned Actual Scan Axis Plansed Actual Positional Parameters Controllbr:
SlStts          Angle     Direction           Scan Offset       Step Offset                         WAT-13           Wheck for lmitaione duaeto the =FAmRP o! 'he 10%= GE-'
laR Lower Lirnit 1S400 18400 LowerLimit 2839 2839 Scam Direction:
Incuaei i        On             ij          -                 - 1.40(in)         1.35(n)               -        001301            instrumenataion tubes.
Dn/Up San liionn Pivot Upper Limit 36598 36598 Upper in b 4474 4474 rimidutr Siz 1.00 litcremenl:
Channel2          On        _ 55 _              )               4 1.40(in)           1.35(in)                       0801302                                                                               '1* W"'M Channel 3         1tn          SlIC 40       (-)                   2.00)n)        4 1.72(inl)                       001303 Channel 4        On           SlI t40      (M)                   2.00(in)       + 1172(i)                         0801304          Examination Remarks:
Bloom Rutaie Increrent Interval 54 DCI 3 Code % of Overlap: I Mode: Aultomatic Scan Conversion Counts 100 ConversionCounts 100 Number orScans: 33R Scan Mtien: I i-directional Conversion Units Degrees Conversion Units Degrees 11Std Rotate Pesitow. 0.0(Correction:
ChannelS          Ott            o1.        (t)                  i O.0in)         4 L72iQn)                         I01305              limited examination due ut the pruximity of the lower head Chanune 6         (1T1            N/A         N/A                     N/A             NIA                              NIA              instrumcnlatiun tubes.
Default Radius In. 88.19 Radius tn. 88.19 110is (Pivot Point): 324.05 tiodule Parameters:
Channel 7         (oir          NtA        NIA                      N/A             NIA                                N/A Channel S        OtT            NIA        N/A                     NIA              NIA                              N/A             Partiatl examination.
07A Cal IJ Catlibratlon Records: framinasion Notes: Status Angle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the Eroximitv of the lower hiead thancI I On 55 (-L -1.40(in) 1.35(n) 0801301 insrumentation tubes.Channe 2 on 55 (3) + 1.4U)(in) 1.35(in) 0801302 Channel 3 On SlOC 40 (.) -2.00(in) 1.72(in) 31801303 _ __Channel_4 On SlM:40 14) 4 2,00)n) 4 1.72fin) 0801304 Examination Remarks: Channcl5 On 01 (i 4 0.00(in) 4 1.72(in) 11801305 Limited examination due to the proximity of the lower iend Channet 6 Off N/A NI/A NA N/A N/A instrumentation tube.Channel 7 OfT N/A N/A N/A N/A N/A Channel 8 OfT N/A N/A N/A N/A N/A Partial examination.
Increment & Scan Positions Actual                               Reser4able Inicatlions          _                                      Anclyst Remarks Scan No (s)     Increen    Il'osilinn            Scan Position                     Yes       No     NIA Atagkment:,
Incremest
Stati          Stop        Start           Stop      Channel I 0           l        O            Ye5        No 333 - 338        36326          3659a        28:39          3772        Channel 2 U                   Q    Eurthr Evaluation        _
& Scan Positlons Actual Recerdable Indicatioos Analyst Remarks Scan No.(5) Incremnent Position Sam lPnsition Yes No N/A Attchment:
Channel 3 D          13      0     Required:
c Siat StoP Start Stlp Channel I 0 i) 0 9 Yes LI No See Attachment Channel 2 O LI U Further F.valnqtinn
_hannel4    LI               0-            YeCs[ No
_ Channel 3 0 W O3 Required:_Ch_ aonnel4 o Ei LI Yes [3 No_ Channel5 0 LI ( Archivc Tape/CD No.:_ _ _ __ Chanel6 0 a 0 lA/B__ _ Cha nne7 0 1 Analysis Tape/Cl)No  
_channels5    U D          )      01    Archive Iape/C') No.:         __
-I_ Channeld 0 n NIA Analyst I SNT Levelt Date ' //i us'.C-, 0 us IswrfoaMrm IJTSS ne'..aSz)
_                           _         _           Channel 6 U          C        DI              I A/__
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1 -ISI-17 Attachments Increment
Channel 7              El      9 Analysis Tape/cl) No.- I
& Scan Positions Actual Examination number 2 (attachment)
_              Channel B O                    9 E1              NIA Analyst / S1T Level I Date .,        /                   ,-                                                    _
Increment Position Scan Position Scan No.(s)Start stop Start Stop 1 -4 18403 :8562 2839 340C 4 5 -16 18617 1.9210 2839 4474 17 -47 19266 20885 2839 3205 48 -59 20886 .1478 2839 4474 60 -80 21534 22615 2839 4000 81 -105 22668 23909 2839 3109 106 -166 23963 27202 2839 4474 167 -187 27259 28340 2839 3673 188 -194 28390 28714 2839 4474 195 -204 28772 59251 2839 3373 205 -215 29312 29851 2839 3274 216 -218 29902 30010 2839 3184 219 -227 30067 30501 283P 4474 228 -244 30555 31416 2839 3106 245 -256 31467 32063 2839 4474 257 -276 32121 33147 2839 3574 277 -3)8 33205 35414 2839 4474 319 -338 35465 36495 2839 37?2 E2A-7 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief l-ISI-17 Attachments Exam Number 2 Page 1 oft I X Watts Bar Unit 1 Bottom Hd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 30.78 -31.71 193.92 -198.78 2.29 -2.94 Channel 1 194.80 -199.66 33.70 -34.63 Module Inc.Scan Coordinates Axis Axis Feature Analysis Comments Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Module Inc -Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Channel 2 194.80 -199.66 27.85 -28.78 Channel 3 192.64 -197.50 33.2B -34.21 Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Channel 4 192.64 -197.50 28.27 -29.20 Channel 5 192.64 -197.50 30.79 -31.72//./? A4099-Leez -/&deg; W'eC Sta&-E2A-8
SaeTFoRM W..UT5aqK-. GMt)
,H1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:
 
Waits lint Wedd identincatlbn:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
RI'V.WOI-02 PralRev/ChgfICN:
Inservice Inspection Program Request for Relief I-ISI-17 Attachments Exam Number 2a                                                        Page I of 2 Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis                            29.19 - 30.12 Inc. Axis                          183.12 - 185.82 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                              3.25 - 5.98 Scan Axis                            32.11 - 33.04 Channel 1 Feature Analysis                            Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
ISwT-PDI.AUTIi/OC`1&2 Examination No.: 2a ProlectNo.:
Channel 2 Module Coordinates Inc. Axis                              3.25 -   5.98 Scan Axis                            26.26 -    27.19 Channel 3 Module Coordinates Inc. AXis                                      - 3.85 Scan Axis                            31.69 - 32.62 Channel 4 Module Coordinates Inc. Axis                                    - 3.85 Scan Axis                             26.68    - 27.61 Channel 5 Module Coordinates Inc. Axis                                    - 3.85 Scan Axis                            29.20 - 30.13 hi              teF~vf . -792 /V HPfx        Zaooj E2A-10
04-0368 1 WetdDescripiieon:
 
_mrc akHspz.b(tsr-wl DeviceConfieurateiu WAT-WAiCON-0001 Mod.Conf.:
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:      Watts Bar                                                    IW.IdIdentification: RPV-WOI-02                        ProlRev/ChgICN:        ISwT-PDI-AUT I /0/1&2       ExaminatiDnNo                    3 PrejctN.: 04-.036t                                                    Weld Deseription:              HC..oaHs          is          Device Configuration:  WAT-WALCON-0001 Mod.Conf: 07B                                                          ScanPathDriwing: SP-WOI-02                                          Exam Date              Examialion Time                SurcTet          ertureol Daa Acquisition Operstor (s) / SNT Level: Alan Scheler / NlA                                                                              10 March 2005          Start          End            Start                  End
07A JScan Path Drawing: SPWDI0-02 Exam Date EIxaml ation Time Surface Temperature IF Data Acquisition (Operator (s) I SNT Level: Alan Sthaefer NIA 10 March 2005 Start End Star End Scan Controller Parameters Increment Asis Planned Actual Scan Axis Planned Actual Positional Paramiteer t.ontrollcr.
__ __ _ _ _ _ _ _ _ _ _ _ _ _ _ __ __ __ _    _  _    _  _  _  _  _  _ _    _  _ _    _0456                                          0813766 Scan Conlroller Parameters                  Increment Axis                    Planned                  l    Actual          SCan Axi              Planned            Actual              Positional Parameters                I-s Controlcr                        laR lLower                      Limit                    3272                  j    3272            Lower LIimit            500              500      lctcam r'ireetion:                 Cw/(cw Scan:                       MmunRobtod            Uppcr Limit                          40Y2                        3920            Upper Limit              1S50t0          tS50t)     1ransduccr Size:                     IWD Increment:                  rho Ili' Vot            Increment Interval                  54                                          DCI                      3                          Code % ofOverlap:                       J0 Mode:                   Antlniatic Scan          Conversion Counts                    100                                          Conversion Counts        101                        Number of Scans:                       16 Scar Mution:             Ii-directional            Conversion Units                    Dcgrces                                      Conversion Units        Degrees                    Head Rotate Position:                 90.00 Corection:                   Default              Radius In.                          S8.19                                        Radius In.              88.19                      Hoist (Pivot Point):               324.05 Module Parameters:                     07B            Cal 13                                                                         Calibration Records: lExamination Notes:
PaR Lower Limit 1_400 _ 36326 Lowerlimit 2839 2839 Ream Direction:
Status            Annle          Direction             Scan Offset             Sten Offset                               WAT-13         ICheck tor limitations adue to Ihe aroximitv of the lower head Channel l            On               55              (F)                    + 1.40(in)             - 1.35(in)                             0801301        instrumenlationtubes.                                                         0 GA Channel 2            cn              55               ()                       1.40(in)           -1.35(in)                               0801302 Chanscl 3             On            SLI< 40               t                    2.00(in)             4 1.72(in)                             0801303                                                                                        rA Channel 4             On             SIlIC 40            (-)                 - 2.00(in)                 1.72(in)                             0801304         Examination Remarks:
DorUp Scan: Room PFiv, Upper Lirht. 3659S 1659 lIpperliitt 4474 3172 rransducer Si7e: 1.00 Increment:
1.4    tw~
Ioon, Rotate Incremcnt Interval 54 DUI 3 Code % orOveap: 10 Modc: Automatic Scan Conversion Counts 100 Conversimn Counts 100 Number of Scans: 338 Scan Motion: Ri-directional C(onversion Units Degrees Conversion Units Degrees Rtcad Rotatt Position:
Channel5              Onl              01.               ()                   4 0.00(in])             4 1,72(in)                             0801305          limited examinStionductolhe proximity      f(lic loWerFhead Channel 6             (it            NMA                N/A                       N/A                 N/A                                   N/A           instrumentation tubes.
0.00 DCorection eauhlt Radius IrL 88.19 Radius In. 88.19 tlolst(Pivot Point): 324.05 ModuleParameters:
Channel 7             (11             N/A               N/A                       NIA                 NA                                     N/A Channel 8             Off             N/A               N/A                       N/A                 N/A                                   N/A           Partial Examination Increment & Scan Positions Actual                                               Recordable Indications                                                   AnalystRemarks Incremct Position                       Scan Position                             Yes       No         N/A  
07A Cal 13 Calibration Records, INxamiati oter: SlStts Angle Direction Scan Offset Step Offset WAT-13 Wheck for lmitaione dua e to the =FAmRP o! 'he 10%= GE-'Incuaei i On ij --1.40(in) 1.35(n) -001301 instrumenataion tubes.Channel2 On 55 _ _ ) 4 1.40(in) 1.35(in) 0801302 Channel 3 1tn SlIC 40 (-) 2.00)n) 4 1.72(inl) 001303 Channel 4 On SlI t40 (M) 2.00(in) + 1172(i) 0801304 Examination Remarks: ChannelS Ott o1. (t) i O.0in) 4 L72iQn) I01305 limited examination due ut the pruximity of the lower head Chanune 6 (1T1 N/A N/A N/A NIA NIA instrumcnlatiun tubes.Channel 7 (oir NtA NIA N/A NIA N/A Channel S OtT NIA N/A NIA NIA N/A Partiatl examination.
Increment
& Scan Positions Actual Reser4able Inicatlions
_ Anclyst Remarks Scan No (s) Increen Il'osilinn Scan Position Yes No NIA Atagkment:, Stati Stop Start Stop Channel I 0 l O Ye5 No 333 -338 36326 3659a 28:39 3772 Channel 2 U Q Eurthr Evaluation
_Channel 3 D 13 0 Required:_hannel4 LI 0- YeCs [ No_channels5 U D ) 01 Archive Iape/C') No.: ___ _ _ Channel 6 U C DI I A/__Channel 7 E l 9 Analysis Tape/cl) No.- I_ Channel B O 9 E1 NIA Analyst / S1T Level I Date ., / ,- _SaeT FoRM W.. UT 5a qK-. GMt)'1*W"'M Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-17 Attachments Exam Number 2a Page I of 2 Watts Bar Bottom Rd WO1-02 Unit 1 Cap to Spherical Ring Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Inc.Scan Coordinates Axis Axis 29.19 -30.12 183.12 -185.82 2.29 -2.94 Channel 1 3.25 -5.98 32.11 -33.04 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Feature Analysis Comments Module Inc.Scan Coordinates Axis Axis Channel 2 3.25 -5.98 26.26 -27.19 Channel 3 Module Inc.Scan Module Inc.Scan Coordinates AXis Axis Coordinates Axis Axis-3.85 31.69 -32.62 Channel 4-3.85 26.68 -27.61 Channel 5-3.85 29.20 -30.13 Module Coordinates Inc. Axis Scan Axis hi teF~vf .-792/V HPfx Zaooj E2A-10 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:
Watts Bar IW.IdIdentification:
RPV-WOI-02 ProlRev/ChgICN:
ISwT-PDI-AUT I /0/1&2 ExaminatiDnNo 3 PrejctN.:
04-.036t Weld Deseription:
HC..oaHs is Device Configuration:
WAT-WALCON-0001 Mod.Conf:
07B ScanPathDriwing:
SP-WOI-02 Exam Date Examialion Time SurcTet ertureol Daa Acquisition Operstor (s) / SNT Level: Alan Scheler / NlA 10 March 2005 Start End Start End_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _0456 0813766.Scan Conlroller Parameters Increment Axis Planned l Actual SCan Axi Planned Actual Positional Parameters Controlcr laR lLower Limit 3272 j 3272 Lower LIimit 500 500 lctcam r'ireetion:
Cw/(cw Scan: MmunRobtod Uppcr Limit 40Y2 3920 Upper Limit 1S50t0 tS50t) 1ransduccr Size: IWD Increment:
rho ' Ili Vot Increment Interval 54 DCI 3 Code % of Overlap: J0 Mode: Antlniatic Scan Conversion Counts 100 Conversion Counts 101 Number of Scans: 16 Scar Mution: Ii-directional Conversion Units Dcgrces Conversion Units Degrees Head Rotate Position:
90.00 Corection:
Default Radius In. S8.19 Radius In. 88.19 Hoist (Pivot Point): 324.05 Module Parameters:
07B Cal 13 Calibration Records: lExamination Notes: Status Annle Direction Scan Offset Sten Offset WAT-13 ICheck tor limitations adue to Ihe aroximitv of the lower head Channel l On 55 (F) + 1.40(in) -1.35(in) 0801301 instrumenlationtubes.
Channel 2 cn 55 () 1.40(in) -1.35(in) 0801302 Chanscl 3 On SLI< 40 t 2.00(in) 4 1.72(in) 0801303 Channel 4 On SIlIC 40 (-) -2.00(in) 1 .72(in) 0801304 Examination Remarks: Channel5 Onl 01. () 4 0.00(in])
4 1,72(in) 0801305 limited examinStionductolhe proximity f(lic loWerFhead Channel 6 (it NMA N/A N/A N/A N/A instrumentation tubes.Channel 7 (11 N/A N/A NIA NA N/A Channel 8 Off N/A N/A N/A N/A N/A Partial Examination Increment  
& Scan Positions Actual Recordable Indications AnalystRemarks Incremct Position Scan Position Yes No N/A  


==Attachment:==
==Attachment:==


Scan Nos) Start l Stop Start Stop Channel I [l El O 1 Yes 0 No See attachtnent C lhannel 2 0 E O Further Evaluation Channel 3 n 0o Required: Chlannel4 E .' 0 &deg; Yes GI No Channel 5 1 U 0 El Archive Tape/CD No.: Channel6 0 0 13 I AtU Channel 7 0 0 Analysis Tapc/CD No.: It_ ChannelS n 0 &#xb6; N/A Anlyst I/SNr Level/ Dale: j 2 / /I-s GA 1.4 0 rA tw~JSwTr FOaM K. UT so (R.. "42a Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request fir Relief 1-ISI-17 Attachments Increment  
Scan Nos)           Start       l   Stop               Start           Stop         Channel I                 El        [lO          1 Yes   0   No See attachtnent                                                                       lhannel 2 C                0         E           O     Further Evaluation Channel 3       n                       0o Required:
& Scan Positions Actual Examination number 3 1attachment)
Chlannel4       E         .'         &deg;0            Yes GI No Channel 5       1U        0           El   Archive Tape/CD No.:
Increment Position Scan Position Scan No.(s) 4 Start Stop start Stop I -4 3269 3433 500 3695 4739 13832 15110 18500 5 -10 3484 3759 521 1949 3490 3662 4745 6443__ 7466 13838_ 15104 18500 11 -12 3815 3865 500 2021 4742 6482._ 7445 10547 11438 12311 13316 13838 15071 18500 13 3918 _ 500 1865 5288 6395 7853 10307 13322 13811 14876 16967 17930 18500------ -- -________ X_____ ._____ -I__________
Channel6         0       0           13             I AtU Channel 7         0               0         Analysis Tapc/CD No.:
_________==_______  
It_               ChannelS         n       0           &#xb6;               N/A Anlyst   I/SNr   Level/     Dale:                                 2              j /               /
'____________________  
JSwTrFOaM K. UT so (R.. "42a
._____________________
 
E2A-12 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 3 Page 1 of Watts Bar Bottom Ed W01-02 Unit 1 Cap to Spherical nRing Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 9.27 -10.20 26.61 -31.47 2.29 -2.94 Channel 1 Module Inc.Scan Coordinates Axis Axis 34.33 -39.19 6.35 -7.28 Feature Analysis Comments Channel 1 Summary No recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 Module Coordinates Inc. Axis Scan Axis 34.33 -39.19 12.20 -13.13 Channel 3 Module Inc.Scan Coordinates Axis AXiS 6.77 -7.70 Channel 4 Module Inc.Scan Coordinates Axis Axis 11.78 -12.71 Channel 5 Module Inc.Scan Coordinates Axis Axis 9.26 -10.19 MJ{. m/a "IfA ZcOUJ -
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
I 1111 SOUTHWEST TECHNOLOGIES VT AUTOMATED ULTRASONIC EXAMINATION RECORD Sie/Plant-Watts Bar [weld Idetifieatlion:
Inservice Inspection Program Request fir Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 3 1attachment)
RPV-WOI-02 Pro/Rev/Chat/CN:
Increment Position                         Scan Position Scan No.(s)                                             4 Start                 Stop           start                       Stop I - 4                 3269                 3433             500                       3695 4739                     13832 15110                     18500 5 - 10                 3484                 3759             521                       1949 3490                     3662 4745                     6443
1SwT-PDI-AUT//0/l&2 Examination No.: 3a Project No.- 04-0368 Weld Des crition: *n CBH s gi.Is-1a Device Configuration:
__                      7466                     13838
WAT-WALCON-001I Mod.Conf.:
_                        15104                     18500 11 - 12                 3815                 3865             500                       2021 4742                       6482
07D Sea. Patk Drawing: SP-WO 1-02 Exami Date Eamnintion Time ccrfe Ter perature IF Deta Acquisition tperalor (s)! SNT Level: David R. Kleinjan 11 10 MarcI 2005 Start End Sltrt End 0S14 0830 76 76..-?'r'-: .r;.; *. : <I.-.s% c0. : ; * ........ : ~ .~?.y< %4........*..9~~  
                              .                     _               7445                     10547 11438                     12311 13316                     13838 15071                     18500 13                   3918                   _               500                     1865 5288                     6395 7853                     10307 13322                     13811 14876                     16967 17930                     18500
..... X stiA i B^.;i.t .: ..; !_:': sl-'. 0 r Scan Controller Parameters Increment Axis Planned Actual Sta. Axis Planned Actual Positional Paranmelers Controller PaR Lo.wer Limit 3272 l 3974 Lower Limit 500 500 j Beam Direction:
________                  X_____._____                      -I__________
CwtCcw Scan: Doornl Rotate Upper Limit 4082 3974 Upper .iatit 1I500 18500 -Iransducer Size: LOO Incranent:
_________==_______                                             '____________________   ._____________________
BoornI Pivot Increment Interval 54 ml. 3 Code % of Overlap: 10 Mode: Auto rnatic.Scan (Conversion Counts 100 C o1MNvriOl ( Dunts 100 Number of Scans- I1h Scum Motioo: fli-directional CAnversion Units Dcegrees Conversion Units Degrees I lead Rotate Position-90.00 Correction:
E2A-12
Derault Radius In. 8.19 Raius In. 8.19 t oist (Pivot Point): 324.05 Modals Parameters:
 
0711 Cal 13 Callbralion Records: lEx.ni.Mtcoo Notes: A- -C Ang Direction Scan Offret Step Oftset WAX- 13 Check for lmirtalinn  
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
!0 th- nvIMRY or!the i head Channel I (tn S5 (+N i 1.40lin) -1.35(in) 0801301 instrumentation lubes.Cbatrnel2 On 55 A-)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 3                                                           Page 1 of Watts Bar Unit 1 Bottom Ed Cap to Spherical nRing W01-02 Cursor Box 1 of 1 Scan Axis                             9.27 - 10.20 Inc. Axis                            26.61 - 31.47 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                             34.33 - 39.19 Scan Axis                              6.35 - 7.28 Channel 1 Feature Analysis                           Summary Comments No recordable Indications channels 1, 2, 3, 4, and 5.
* 1.40(in) 1.35(in) 08010312 Channel 3 On SLIC(40 (1) I 2.)0(in) + 1.12(in) 0801303 Channel 4 <On SLIC 40 (- ) -2.11t(in)  
Channel 2 Module Coordinates Inc. Axis                           34.33 - 39.19 Scan Axis                            12.20 - 13.13 Channel 3 Module Coordinates Inc. Axis Scan AXiS                             6.77 -   7.70 Channel 4 Module Coordinates Inc. Axis Scan Axis                           11.78 - 12.71 Channel 5 Module Coordinates Inc. Axis Scan Axis                             9.26 - 10.19 MJ{.m                                           /a "IfA ZcOUJ -
+ 1.72(in) 80 1 U304 xaimination Remarks: C.hannel 5 (n 0t. O-) I 0.01(in) 41.721in) 0811305 lmited examination due ItpnxLimonilt of the lowerbead Lhannel 6 Off NrA N/A NMA NJA N/A instrmnted n tubes.Channel 7 Off NMA N/A NIA NIA NIA Channel S Off NMA N/A NMA N/A N1A _ Porial Lxamination Increment  
 
& Scan Positions Actual Recordable Indications 1 _Analyst Re rs Scan No.(s) Increnent Position Scan Positimi Yes No NIA Atlachirnit:
I                                                               1111 SOUTHWEST TECHNOLOGIES VT                                                 AUTOMATED ULTRASONIC EXAMINATION                                                         RECORD Sie/Plant-       Watts Bar                                         [weld Idetifieatlion: RPV-WOI-02                       Pro/Rev/Chat/CN:           1SwT-PDI-AUT//0/l&2           Examination No.:                         3a Project No.- 04-0368                                               Weld Descrition: *nCBH s gi.Is-1a                     Device Configuration: WAT-WALCON-001I Mod.Conf.: 07D                                                     Sea. Patk Drawing: SP-WO 1-02                                     Exami Date             Eamnintion Time                             Ter perature IF ccrfe Deta Acquisition tperalor (s)! SNT Level: David R. Kleinjan 11                                                                       10 MarcI 2005           Start         End                 Sltrt                         End 0S14         0830                   76                           76
Start Stop Start Stop Channel I 9 1 U -I Yes U No Sec attachument Channel 2 0 91 01 Funher Evaltiation Chuadn 3 0J P LI Required: Ch__i__ _ 4 _0 El O O Yes El Nol .hued 5 0 0 0E ArcIhei TeDCI) N(o.:.Chwuni 6 0 0 0 I A/l __A/B hwnd 7 LI -E[ Anatysit apc/Cl .____.chaIm Sl 0 (d 1 NiA__AnalystI SNT Level I Date: / J /J5WT FORSM Ift. VT M; (/0.. avai (.5.&#xa2;2 v.1 0 iN Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-17 Attachments Increment  
                              .       .     -?'r'-:           .r;.;     *.     :   <I.-.s%             c0.   :     ; *........               :   ~     .~?.y<               %4........*..9~~       ..... X stiA i .:B^.;i.t 0 r sl-'.
& Scan Positions Actual Examination number 3a (attachment)
Scan Controller Parameters                     Increment Axis             Planned                       Actual       Sta. Axis               Planned             Actual                   Positional Paranmelers Controller                     PaR                 Lo.wer Limit                   3272               l   3974           Lower Limit               500               500     j Beam Direction:                               CwtCcw Scan:                     Doornl Rotate             Upper Limit                   4082                     3974           Upper .iatit               1I500           18500     -Iransducer Size:                                     LOO Incranent:                 BoornIPivot                Increment Interval           54                                       ml.                       3                           Code % of Overlap:                                     10 Mode:                   Auto rnatic.Scan           (Conversion Counts             100                                     C o1MNvriOl ( Dunts         100                         Number of Scans-                                       I1h Scum Motioo:             fli-directional           CAnversion Units               Dcegrees                                 Conversion Units           Degrees                     Ilead Rotate Position-                             90.00   (.5.
Increment Position Scan Position Scan No.(s) .Start Stop start Stop 14 3974 .506 184 2999 3554 5273 6347 7859 10316 11489 12149 14975 16973 180;1 18503______ .1 = _________
Correction:                   Derault                 Radius In.                   8.19                                     Raius In.                 8.19                         t oist (Pivot Point):                         324.05 Modals Parameters:                   0711             Cal 13                                                                 Callbralion Records: lEx.ni.Mtcoo Notes:
_ _________;__
          -      C A-                 Ang             Direction         Scan Offret         Step Oftset                             WAX- 13         Check for lmirtalinn       th-
E2A- 15 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 3a Page 1 of 1s Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WOI-02 Cursor Box 1 of 1 scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments 9.27 -10.20 24.99 -24.99 2.29 -2.94 Channel 1 39.72 -39.72 6.35 -7.28 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Module Coordinates Inc. Axis scan Axis Channel 2 39.72 -39.72 12.20 -13.13 Channel 3 Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis AxiS 6.77 -7.70 Channel 4 Coordinates Axis Axis 11.78 -12.71 Channel 5 Coordinates Axis Axis 9.26 -10.19 1,AM47:A 2 I-xvi.d. zz,/0 $A4 koVJ-E2A-16 IHI SOUTHWEST TECHNOLOGIES 9;BV AUTOMATED ULTRASONIC EXAMINATION RECORDI Site/lamnt:
                                                                                                                                                                                    !0           nvIMRY or!the i                 head                 &#xa2;2 Channel I             (tn             S5                 (+N             i 1.40lin)           - 1.35(in)                             0801301         instrumentation lubes.
Wntts par IWeld Identifleation:
Cbatrnel2             On             55               A-)
RPV-WOI1-02 Pro1Rev1ChgfICN:
* 1.40(in)             1.35(in)                             08010312                                                                                                           0 Channel 3             On           SLIC(40             (1)               I 2.)0(in)         + 1.12(in)                               0801303                                                                                                             iN Channel 4             <On         SLIC 40             (- )             - 2.11t(in)         + 1.72(in)                               1 U304 80                xaimination Remarks:
ISwT-PDI-AUTI/0A/01&2 E Project No.: 04-0368 Weld Descriptica:
C.hannel 5             (n             0t.               O-)               I 0.01(in)           41.721in)                               0811305         lmited examination due ItpnxLimonilt of the lowerbead Lhannel 6             Off           NrA               N/A                   NMA               NJA                                     N/A             instrmnted n tubes.
vmc o s tss-s Device Confieuration:
Channel 7             Off           NMA                 N/A                   NIA               NIA                                     NIA Channel S             Off           NMA               N/A                   NMA               N/A                                     N1A       _ Porial Lxamination v.1 Increment & Scan Positions Actual                                         Recordable Indications                                                     1       Re   rs
WAT-WALCON-000l
_Analyst Scan No.(s)         Increnent Position                     Scan Positimi                       Yes       No       NIA Atlachirnit:
______________No_3b Mod.Conr.:
Start           Stop               Start         Stop       Channel I               19      U -             I Yes U No Sec attachument                                                                   Channel 2     0         91       01 Funher Evaltiation Chuadn   3 0J         P         LI Required:
07B1 Scan Path Drawing: SP-WIOI -02 Esam Date Exan.in.ti, Time Surface Te arne rea F Data Acquisition Operator (s) t SNT Level: David R. Kteiaian I llII Mardi 2005 St3rt End 0strt End 0832 t0oei 76 1 76 Scnn Controller Parameters Increment Axi Planned Actual Scan Axis Planned Actual Psaitional Parameters Controller:
Ch__i__4 _         _0 El       O             O Yes El No l      .hued                                                               5 0           0         0E ArcIhei TeDCI) N(o.:
PaR I.ower Limit 3272 4028 LowerLimit 50D Soo Beam Direction:
                    .                                                               Chwuni 6 0             0         0                   I A/l               __A/B hwnd 7 LI               -       E[ Anatysit apc/Cl .                       ____
Cw/Ccw Scan: Boom Rtlate Upper Limit 4082 j 4082 Uppc limit IS5t0 18500 Transducer SIze: 1.00 Increment:
      .                                                                             chaIm Sl 0                       (d1                  NiA__
Booom Pivr lIncrement Interval 5-4 IX.1 J Cdc;.ofOverlap:
AnalystI SNT Level I Date:               /J                                             /
tO Mode AulomaticScan Conversion Counts 100 Conversion Counts lOr Number of cans: 16 Scan Motion: Hi-directional Convcrsion Units kgrmcl Conversion Units Degrees [ed Rdtte Position 90.00 Correction:
J5WT FORSM Ift. VTM;(/0..avai
Default Radius In. t8.19 Radies in. S8.19 loist (PivotPoint) 324.05 Module Paramelters:
 
07 Cal 13 Calibration Records: lEsanination Notes: Sastus Angle Direction Sean Offset Step Offset WA'I-t3 I Chbck Mr limlatin HeI to the nr, Mit 0! !the i hehe'Channel I On 55 5) 4 1.40(in) 1.35(in) 0801301 instrtuentalion tubes.Channel2 On 55 (-) -1.40(in) -I.35tin 0801302 (.Channel 3 On SlIC4D +) + 2.00(in) + 1.72(in) 080(1)03 =Chattel 4 (t SIAIC40 (.1 -2.00(in) + 1.72(in) 001304 Fsamination Remarks: Channel 5 OIl OL (-t) I 0.0(Win) + 1.72(in) (l80 1305 Limited exmnination due to the proxlmity of the lower lad Channel 6 0IT N/A N/A N/A N/A NtA instrumentation tubes.ChannnC 7 O(F, NIA NIA NMA NIA N/A Oannell oIT NIA N/A N/A NIA N/A..*, -s.;'-i_ ...........  
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
;._. .. *'.7' ai : ....... : .--Increment  
Inservice Inspection Program Request for Relief I-ISI-17 Attachments Increment & Scan Positions Actual Examination number 3a (attachment)
& Scotn Positions Actual Recordable Indications Analyst Rernarks S No.s) IncremenI Position Scan Position Yes ND NIA Attachunenl:
Increment Position                     Scan Position Scan No.(s)                                                         .
Start StO" Start SO Channel I U l 3 1 Yes 0 No See attachmnt Channcl 2 0 91 (j Further Evoluatiot Chnnel 3 0 hi] Itequiled:
Start                 Stop           start                   Stop 14               3974         .                       506                     184 2999                   3554 5273                   6347 7859                   10316 11489                   12149 14975                   16973 180;1                   18503
_ Channel4 U] r [J O Yes Q No_Channel 5 0 (3 i Ardiivc Tnpc CL) No.: _ _ __ _lCbannrl 6 U 0 L I _____Channel 7 U Cl 0 Analysis Tnpv.1) No.: ___ Channel 8 LI] N/__Analyst / SNT Level / Date, , 2o'>1Swir owatnM. UTr so ". WAZI i-i Cs w0 Z C)C)C)02I-i 02 M-0 en It-)
                                  =   _________       _               _________;__
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment  
              .1 E2A- 15
& Scan Positions Actual Examination number 3b (attachment)
 
Increment Position Scan Position Scan No.(s) .Start Stop stat Stop 15 4026 -500 1889 2948 3668 5420 6398 7454 8792 9860 10397 11429 12155.14957 16964 18320 18500 4 4 4 .-4----------.
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
: 4. 4 4 *4. + +___ _ _._ _ _ ,,___ _ __ __ _ _ _ _ _ _ _ _ _ _ _ _ __I _ _ _ _ _ _ _ _I.I ___ = --E2A-18 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief l-ISI-17 Attachments Exam Number 3b Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WO1-02 Page I of 1 3 Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 9.27 -10.20 24.99 -24.99 2.29 -2.94 Channel 1 40.26 -40.26 6.35 -7.28 Module Inc.Scan Coordinates AxiS Axis Feature Analysis Comments Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 Module Inc.Scan Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis 40.26 -40.26 12.20 -13.13 Channel 3 Coordinates Axis Axis 6.77 -7.70 Channel 4 coordinates Axis Axis 11.78 -12.71 Channel 5 Coordinates Axis Axis 9.26 -10.19 I/,;~Z"F-zzz to f4#w 2,0Oj-E2A-19 IH1 SOUTHWEST TECHNOLOGIES dbAUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant Watts Bar iWeldidentifieatlooe RPV-WOI-02 Pro/Rev/ChvAC1N:
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 3a                                                       Page 1 of 1s Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WOI-02 Cursor Box 1 of 1 scan Axis                               9.27 - 10.20 Inc. Axis                             24.99 - 24.99 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                            39.72 - 39.72 Scan Axis                              6.35 - 7.28 Channel 1 Feature Analysis                            Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
ISwT-P[2l-AUIl/W0I/l&2 zxamination No.: 4 Pr!ejet No.: 04-0361t lWeldDescription;  
Channel 2 Module Coordinates Inc. Axis                             39.72 - 39.72 scan Axis                            12.20 - 13.13 Channel 3 Module Coordinates Inc. Axis Scan AxiS                             6.77 - 7.70 Channel 4 Module Coordinates Inc. Axis Scan Axis                           11.78 - 12.71 Channel 5 Module Coordinates Inc. Axis Scan Axis                             9.26 - 10.19 1,AM47:A     2         I-xvi.d. zz,             /0 $A4 koVJ-E2A-16
~ s ,(ras DeviceConfigurastion-WAT-WALCON4-001 Mod.CenI.:
 
0711 IScan Path Drawin SP-WOI-02 Exam Date Examaination rime Surface Teaperature IF Data Acquisition Operator (3) /SNT Level: David R. Kleinjan Il 10 March 2005 Sbart End Start End.0915 1024 76 76 Scan Controller raramrters Increment Axis Planned Actual Scan Asia Planned Actual Positional Parameters Controller:
IHI SOUTHWEST TECHNOLOGIES 9;BV                                                   AUTOMATED ULTRASONIC EXAMINATION RECORDI Site/lamnt:     Wntts par                                             IWeld Identifleation: RPV-WOI1-02                       Pro1Rev1ChgfICN:         ISwT-PDI-AUTI/0A/01&2           E Project No.:   04-0368                                               Weld Descriptica:         vmc o       s   tss-s       Device Confieuration:     WAT-WALCON-000l                 ______________No_3b Mod.Conr.: 07B1                                                         Scan Path Drawing: SP-WIOI -02                               Esam Date               Exan.in.ti, Time                 Surface Te       arnerea F Data Acquisition Operator (s) t SNT Level: David R. Kteiaian I llII                                                                   Mardi 2005             St3rt           End 0strt                                     End 0832           t0oei               76           1       76 Scnn Controller Parameters                   Increment Axi                     Planned                     Actual     Scan Axis               Planned                                                                                   i-i Actual               Psaitional Parameters Controller:                     PaR                 I.ower Limit                       3272                     4028         LowerLimit               50D               Soo         Beam Direction:                     Cw/Ccw Scan:                       Boom Rtlate               Upper Limit                         4082             j     4082         Uppc limit                 IS5t0             18500       Transducer SIze:                     1.00 Increment:                 Booom Pivr             lIncrement Interval                   5-4                                 IX.1                     J                             Cdc;.ofOverlap:                         tO Mode                   AulomaticScan               Conversion Counts                   100                                 Conversion Counts         lOr                           Number of cans:                         16 Scan Motion:               Hi-directional           Convcrsion Units                     kgrmcl                             Conversion Units           Degrees                     [ed Rdtte Position Cs    . w Correction:                                                                                                                                                                                                                 90.00 Default               Radius In.                         t8.19                                 Radies in.               S8.19                           loist (PivotPoint)                 324.05 Module Paramelters:                         07           Cal 13                                                                 Calibration Records: lEsanination Notes:                                                                       .
PaR Lower Limit 3272 1 3272 LoweLimit 1J400 18400 Beam Direction:
C) 0    Z Sastus             Angle         Direction C)
Cw/Ccw Sncn: Boom Rotate UpperLimitl 4082 l 3867 UpperLimit 36601 365o9 d oransdcr Size: 10'Sncrcnc noorn ivot IncreDent interval 54 DCI 3 3 (WeIsTrOa Ovcerlap:
Sean Offset       Step Offset                           WA'I-t3I          Chbck Mr limlatin       HeI to the nr,       Mit0! !the i         hehe' Channel I             On                   55                                                                                                                                                                                                             M-
10 Mode: Automatlic Scan Conversion Counts 100 Conversion Counts 100 Number of Scans: 16 Scan Motioti: Bi-diteciioal Conversion Units Degres Conversion Units Depees Head Rotate Positior.
: 5)                   4 1.40(in)         1.35(in)                         0801301         instrtuentalion tubes.                                                         C)
9.00 Correction:
Channel2               On                   55             (-)                   - 1.40(in)       - I.35tin                           0801302                                                                                                           0
ierault Radius In. 38.19 Radius In. 8.19 sHoist (Pivot Point): 324.05 Module Parametert:
(.Channel 3           On             SlIC4D               +)                 + 2.00(in)
0T7 Cal 13 CalibrationReeords:
Chattel 4             (t             SIAIC40             (.1                   - 2.00(in)
zExaminatlin Notes_Slatus Ande Direction Scan Offtr Step on Offtet! A-13 C.ee o :-:s due to tlre fuximiiy oF iie iowr head C nO 55 _ ( 4 14in) 1.35in) P001301 insarumertnbon tubes.Channel 2 On 55 -1.40(in) 135fin) 0801302 Channel 3 On SIlC 40 2. 00(in) 4 1.72lin) 0801303 Channel4 On SIIC4 (-) 2.00(in) 4 1.72/in) 0801304 Examination Remarks: Channel 5 _tn _ IL !CinL_+ 1.72(in) O031305 imiled txaminalion due to the proximity of tbe lower llead Channel 6 0!! N/A N/A N/A N/A N/A inslnmaentation tubes.<hannel 7 (IT NMA N/A N/A N/A N/A Ch8anelS Off NM _ N/A N/A NIA N/A rtial l~xominatioa
                                                                                                    + 1.72(in)
.. .' , ; ,' ,' ,s.: tt .~ ... h .** ; , ;, , ;..'-, ; *.. .' " Increment  
                                                                                                    + 1.72(in) 080(1)03    =                                                                                                      en 001304           Fsamination Remarks:
& Scan Positions Actual Rneordable Indicftiens Anals t Remarks S I No4() Incrnmcnt Position Ycan l'osition Yes No N/A Attachmnent:
Channel 5             OIl                 OL             (-t)                   I 0.0(Win)       + 1.72(in)                         (l801305                                                                                                          It-)
Sntart Stop Start Stop Channcl I [I o 3 E Yes LI No Sec Attachnicdt Channel 2 0 F 0 Further Evaluation Channel 3 0 pi 0 Required:_ Chaane4 03 9 &deg; O Yes 0 No_ _ Channel 5 0 0- 9 Achivc Tape/CI) No.: Channel 6 0 0 9I AA]I Canl 7 0 EL C9I Analysis Tape/) No.:_ _ _ _ ChannelS O U 9 N/A Analyst I SNT Level I Date: / / /Vr 00 / /A. l, 55a uSwr FORM N. UT SO (nt-o"n a~d i.0 , Ca (1 ,f-tZ C,, ,a9 0 en Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment  
Limited exmnination due to the proxlmity of the lower lad                     02 Channel 6             0IT                 N/A             N/A                       N/A           N/A                                 NtA             instrumentation tubes.
& Scan Positions Actual Examination number 4 (attachment)
ChannnC 7             O(F,               NIA             NIA                         NMA           NIA                                 N/A Oannell             oIT                 NIA             N/A                         N/A           NIA                                 N/A
Increment Position Scan Position Scan No.(s)Start Stop Start Stop 1 -7 3269 3593 1840C 22639 23854 28792 29857 30550 31597 36601 8- 11 3652 3811 18400 19339 20386 22636 23866 28852 29884 30526 31693 32672 33115 36601 12 3865 _ 18400 19306 20260 22648 23605 27304 28369 28804 30226 30493 31744 32209 33295 36601 E2A-21 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request far Relief 1-ISI-17 Attachments Exam Number 4 Watts Bar Unit 1 Bottom Ed Cap to Spherical Ring W01-02 Page I of Cursor Box 1 of I Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments 188.27 -189.20 26.07 -30.93 2.29 -2.94 Channel 1 33.77 -38.66 185.35 -186.28 Channel I Summary No Recordable Indications channels 1, 2. 3, 4, and 5.Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Coordinates Axis Axis Channel 2 33.77 -38.66 191.20 -192.13 Channel 3 185.77 -186.70 Channel 4 190.78 -191.71 Channel S 188.26 -189.19/O He* zaOcj Module Coordinates Inc. Axis Scan Axis/i ZFA~E2A-22 IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant Wells Par [Weld Identification:
                                  -s.;'-i_           ;._.           ..     .
RPV-WO 1-02 Pr/JRev/ChrslCN:
                                                                          *'.7' ai                                             :         : .--
ISwT-PDI-AUTI/0AI/I&2 Examination No.: 4e Pre ectNo.: 04-0368 WelddDescriptlon:
()c I-i Increment & Scotn Positions Actual                                                                                                                                                                                                 02 Recordable Indications                                                   Analyst Rernarks S     No.s)         IncremenI Position                       Scan Position                         Yes       ND       NIA Attachunenl:
aic p tsei 1 srysve DeviceConfiguratlon:
Start               StO"           Start           SO           Channel I U         l           3       1 Yes     0 No                                                                                               r;j See attachmnt                                                                           Channcl 2   0         91         (j Further Evoluatiot Chnnel 3   0                   hi] Itequiled:                                                                                                           t1
WAT.WALCON-0001 Mod.Cof. 07B _ Scan Peth Drawins SP-WI1-02 Exam Date Examleation Time Surface TemperatureeF Data Acqulsition Operitor (a) / SNT Level: David R. Kle nlja ll 10Marc2005 l Start R oad Start Ehd 1Mah20 1025 1038 76 76 Seen Controller Parameter, Increment AxIs Planned Actual Scan Axis Planned Actual Positional Parameters Controller PaR Lower Lirit 3272 3974 Lower LIuit 18400 1400 Beam Direction:
_       Channel4     U]       r         [J       O Yes Q No
Cw/Ccw Scan: Hoon Rotate Upper Limit 4082 3867 Upper Limit 36601 35491 Transducer Size: 1.00 Increment:
_Channel 5   0         (3             Ardiivc i   Tnpc CL) No.:     _     _                       __         _
Boom Pivot Increment Interval 54 DCI 3 Code % of Overlap: 10 Mode: Automatic Scan Conversion Counts 100 Conversion Counts 100 Number of Scans: 16 Scan Motion: Bi-directional Conversion Units Degrees Conversion Units Degrees flead Rotate Position:
lCbannrl 6   U         0         L             I                                 ____
90.00 Correction:
_Channel  7 U         Cl           0 Analysis Tnpv.1) No.:         __
Default Radius In. 3319 Radius hI. SS.19 Hoist (Pivot Point): 324.05 Modnle Parameters:
_                    Channel 8                       LI]             N/__
07B Cal 1.3 Calibration Records: jR.amination Notcs: Status Amede DIrection Scen Offset Sten Offset WAT-13 lCheck for limitations due to the nroxlmltv of the lower head Channel I On 55 (+) + 1.40(in) -1.35(in) 0801301 insirurnentation tubes.Channel 2 (n 55 () 1.40(n) -1.35(in) 0301302 Channel 3 On SLIC 40 (4) 2.00(in) + 1.72(in) 0S01303 Channel 4 On SlIC40 (-) -2.00(in) + 1.72(in) 0801304 Examinatlon Remarks: Channel 5 On OL (0) 4000(in) 4 1.72(in) 0801305 imited examination due to the proximity ofthe lower heed Channel 6 Off NIA NA NWA N/A NIA instrumentation tubes.Channel 7 Off N/A N/A NJA NJA N/A Channel i Off N/A N/A V3A N/A NA Partial Examination Increctnet  
Analyst / SNT Level / Date,                                                                           ,         2o'>
&~ Been Positions Adtwel Recerdsble Indicetibns Analys Renurix Scan No.(s) L Incremnen t Position SaPosition Yes No NIA  
1Swir owatnM. UTrso    ". WAZI
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 3b (attachment)
Increment Position                           Scan Position Scan No.(s)                         .
Start                 Stop                 stat                   Stop 15                   4026                     -                   500                   1889 2948                 3668 5420                 6398 7454                 8792 9860                 10397 11429                 12155
                                            .                           14957                 16964 18320                 18500 4                           4 4 .-   4----------.
: 4.                         4                   4                     *
: 4.                                               +                     +
_ __ __         _   _ _ _ _   _ _ _ _ _ _ _ __I I.I ___                   =                                           -           -
E2A-18
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief l-ISI-17 Attachments Exam Number 3b                                                           Page I of 13 Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis                               9.27 - 10.20 Inc. Axis                            24.99 - 24.99 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. AxiS                            40.26 - 40.26 Scan Axis                              6.35 - 7.28 Channel 1 Feature Analysis                           Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                             40.26 - 40.26 Scan Axis                            12.20 - 13.13 Channel 3 Module Coordinates Inc. Axis Scan Axis                             6.77 - 7.70 Channel 4 Module coordinates Inc. Axis Scan Axis                             11.78 - 12.71 Channel 5 Module Coordinates Inc. Axis Scan Axis                             9.26 - 10.19 I/,;~
Z"F-zzz         to f4#w 2,0Oj-E2A-19
 
IH1 SOUTHWEST TECHNOLOGIES dbAUTOMATED                                                                       ULTRASONIC EXAMINATION RECORD Site/Plant     Watts Bar                                           iWeldidentifieatlooe   RPV-WOI-02                   Pro/Rev/ChvAC1N:         ISwT-P[2l-AUIl/W0I/l&2               zxamination No.:             4 Pr!ejet No.:   04-0361t                                         lWeldDescription;           ~       s       ,(ras       DeviceConfigurastion- WAT-WALCON4-001 Mod.CenI.: 0711                                                 IScan Path Drawin         SP-WOI-02                           Exam Date                 Examaination rime                   Surface Teaperature IF Data Acquisition Operator (3) /SNT Level: David R. Kleinjan Il                                                               10 March 2005               Sbart         End                   Start               End
                                                                                                                      .                                   0915           1024                     76                 76 Scan Controller raramrters                 Increment Axis               Planned                     Actual       Scan Asia             Planned                 Actual                     Positional Parameters Controller:                   PaR               Lower Limit                     3272             1       3272         LoweLimit                   1J400             18400         Beam Direction:                   Cw/Ccw Sncn:                   Boom Rotate             UpperLimitl                     4082             l       3867         UpperLimit                 36601               365o9           d           Size:
oransdcr                10' Sncrcnc                 noorn ivot             IncreDentinterval              54                       3            DCI                       3                                 (WeIsTrOa Ovcerlap:                   10 Mode:                 Automatlic Scan           Conversion Counts               100                                     Conversion Counts           100                               Number of Scans:                     16 Scan Motioti:           Bi-diteciioal           Conversion Units               Degres                                 Conversion Units           Depees                             Head Rotate Positior.             9.00 Correction:                 ierault             Radius In.                     38.19                                   Radius In.                   8.19                             sHoist (Pivot Point):             324.05 a Module Parametert:
Slatus 0T7 Ande Cal 13 Direction           Scan Offtr               Offtet!
Step on CalibrationReeords:
C.ee        A-13 zExaminatlin Notes_
o     :-:s due to tlre fuximiiy oF iie iowr head Ca
                                                                                                                                                                                                                                  ~di.0 (1        ,f C nO 55_        (                   4 14in)             1.35in)                           P001301             insarumertnbon tubes.                                                                         0 Channel 2           On               55                                 - 1.40(in)           135fin)                           0801302                                                                                               -tZ        en Channel 3             On           SIlC 40                                 2.00(in)         4 1.72lin)                           0801303 Channel4             On           SIIC4             (-)                   2.00(in)         4 1.72/in)                           0801304           Examination Remarks:                                                                 ,a9 C,,
Channel 5       _tn             _     IL                                     !CinL_+ 1.72(in)                                   O031305                 imiled txaminalion due to the proximity of tbe lower llead Channel 6           0!!             N/A             N/A                     N/A             N/A                                   N/A               inslnmaentation tubes.
<hannel 7             (IT           NMA             N/A                     N/A             N/A                                   N/A Ch8anelS             Off           NM       _     N/A                     N/A             NIA                                   N/A                 rtial l~xominatioa
                          ' ...       ,   ;     ,'         ,'     ,s.:                                                     tt   .~           ... h     . ** ;   ,   ;,   , ;..'-,       ;
Increment & Scan Positions Actual                                     Rneordable Indicftiens                                                       Anals t Remarks S     No4() I    Incrnmcnt Position                   Ycan l'osition                       Yes         No     N/A Attachmnent:
Sntart                 Stop             Start         Stop       Channcl I     [I         o         3         E Yes LI No Sec Attachnicdt                                                                 Channel 2     0                   0     Further F      Evaluation Channel 3     0         pi       0     Required:
_     Chaane4       03         9       &deg;         O Yes     0 No
_   _                                  Channel 5         0               9 0-   Achivc Tape/CI) No.:
Channel 6     0         0         9I               AA]
I                                                                 Canl     7   0           EL     C9I Analysis Tape/)     No.:
_           _           _                               _             ChannelS     O         U         9               N/A Analyst I SNT Level I Date:                                           /               //
Vr00                          /         /A.                   l,   55a uSwr FORM N. UTSO(nt-o"n
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 4 (attachment)
Increment Position                       Scan Position Scan No.(s)
Start               Stop             Start                 Stop 1- 7           3269               3593             1840C                 22639 23854                 28792 29857                 30550 31597                 36601 8- 11         3652                 3811           18400                 19339 20386                 22636 23866                 28852 29884                 30526 31693                 32672 33115                 36601 12           3865           _                     18400                 19306 20260                 22648 23605                 27304 28369                 28804 30226                 30493 31744                 32209 33295                 36601 E2A-21
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request far Relief 1-ISI-17 Attachments Exam Number 4                                                         Page I of Watts Bar Unit 1 Bottom Ed Cap to Spherical Ring W01-02 Cursor Box 1 of I Scan Axis                           188.27 - 189.20 Inc. Axis                            26.07 - 30.93 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                              33.77 - 38.66 Scan Axis                            185.35 - 186.28 Channel I Feature Analysis                            Summary Comments No Recordable Indications channels 1, 2. 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                              33.77 - 38.66 Scan Axis                            191.20 - 192.13 Channel 3 Module Coordinates Inc. Axis Scan Axis                            185.77 -   186.70 Channel 4 Module Coordinates Inc. Axis Scan Axis                            190.78 - 191.71 Channel S Module Coordinates Inc. Axis Scan Axis                            188.26   - 189.19
        /i ZFA~                                        /O He* zaOcj E2A-22
 
IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant     Wells Par                             [Weld Identification: RPV-WO 1-02                   Pr/JRev/ChrslCN:       ISwT-PDI-AUTI/0AI/I&2       Examination No.:           4e Pre ectNo.: 04-0368                                   WelddDescriptlon: aic p               1tsei srysve   DeviceConfiguratlon: WAT.WALCON-0001 Mod.Cof. 07B                                   _       Scan Peth Drawins SP-WI1-02                               Exam Date             Examleation Time               Surface TemperatureeF Data Acqulsition Operitor (a)/ SNT Level: David R. Kle             nlja ll                                         10Marc2005       l Start             Road            Start             Ehd 1Mah20           1025         1038               76                 76 Seen Controller Parameter,           Increment AxIs             Planned                   Actual     Scan Axis             Planned           Actual               Positional Parameters Controller                   PaR         Lower Lirit                   3272                 3974         Lower LIuit             18400           1400       Beam Direction:                 Cw/Ccw Scan:                   Hoon Rotate       Upper Limit                 4082                 3867         Upper Limit             36601           35491       Transducer Size:                 1.00 Increment:               Boom Pivot       Increment Interval           54                                 DCI                     3                           Code % of Overlap:                 10 Mode:                 Automatic Scan     Conversion Counts             100                                 Conversion Counts       100                         Number of Scans:                   16 Scan Motion:           Bi-directional   Conversion Units             Degrees                             Conversion Units         Degrees                     flead Rotate Position:           90.00 Correction:               Default         Radius In.                 3319                                 Radius hI.               SS.19                       Hoist (Pivot Point):           324.05 Modnle Parameters:                 07B       Cal 1.3                                                       Calibration Records: jR.amination Notcs:
Status         Amede     DIrection       Scen Offset       Sten Offset                         WAT-13         lCheck for limitations due to the nroxlmltv of the lower head Channel I             On             55       (+)             + 1.40(in)         - 1.35(in)                         0801301         insirurnentation tubes.
Channel 2           (n             55       ()                 1.40(n)         - 1.35(in)                         0301302                                                                               0 It. us Channel 3           On         SLIC 40     (4)               2.00(in)       + 1.72(in)                         0S01303 Channel 4           On           SlIC40       (-)             - 2.00(in)         + 1.72(in)                       0801304         Examinatlon Remarks:
Channel 5           On             OL       (0)             4000(in)           4 1.72(in)                         0801305           imited examination due to the proximity ofthe lower heed Channel 6           Off           NIA       NA                   NWA               N/A                             NIA             instrumentation tubes.
Channel 7           Off           N/A       N/A                 NJA               NJA                             N/A Channel i           Off           N/A       N/A                   V3A             N/A                             NA             Partial Examination Increctnet &~ Been Positions Adtwel                         Recerdsble Indicetibns                                             Analys Renurix Scan No.(s)   L   Incremnen t Position         SaPosition                       Yes     No       NIA  


==Attachment:==
==Attachment:==


Stop Start Stop Channel I 0 El O 13 Yes O3 No See Attadriment Channdl 2 03 0 ElFurther Evaluation ( harnel 30 a l Required: Channel 4[ 0 3 Yes GI No Cmnl5 0 0 E Archive Tape/CD No.Canl6 03 0 El I AtB Channel 7 0 0 E Analysis Tape/CD No.:/_ _ Channe Ijl p l N/A Analyst / SNT LevelI Date: j -It.0 us Mawr FORKM ii. Wrrr (R,. 03155 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-17 Attachments Increment  
Stop       Start         Stop       Channel I           0El      O         13 Yes O3 No See Attadriment                                                       Channdl 2   03           0   ElFurther Evaluation
& Scan Positions Actual Examination number 4a (attachment)
( harnel 30           al            Required:
Increment Position Scan Position Scan No.(s)-Start Stop start Stop 14 3974 18406 19198 520404 22 226 2318! 271163= j _ 31728 32076-_ -___ 33109 35500 15 4027 _ l 8400 22600 23.1 2?24 31. 8 3207.33289 35500 16 4079 _ 18400 19213 20608 22582_ 23878 27220 31552 32014 33244 35500_____________________
Channel 4[ 0           3                     Yes GI No Cmnl5   0             0   E   Archive Tape/CD No.
____________________
Canl6 03             0         El           I AtB Channel 7 0           0         E   Analysis Tape/CD No.:
____________________
                                                          /_           Channe Ijl             p       l             N/A j
___ ___ ___ _. _ _ _ _ _ _ _ _ _ __ _ _ _ _ t_ _ _ _ _ _ _ ___ ___ _ _ _ _ _ _ _ _!___________
Analyst / SNT LevelI Date:                                                                                     -
t _____________________
MawrFORKM  ii. Wrrr (R,.03155
_____________________
 
=I ....-__________________
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
E2A-24 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 4a Page 1 of 2 Watts Bar Unit 1 Bottom Ed Cap to Spherical Ring WOI-02 Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 188.27 -189.20 24.99 -26.07 2.29 -2.94 Channel 1 39.74 -40.79 185.35 -186.28 Module Inc.Scan Coordinates Axis Axis Feature Analysis Comments Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and S.Module Inc.Scan Module Inc.Scan Module Inc.Scan Module Inc..Scan Coordinates Axis Axis Coordinates Axis Axis Coordinates Axis Axis Coordinates Axis Axis Channel 2 39.74 -40.79 191.20 -192.13 Channel 3 185.77 -186.70 Channel 4 190.78 -191.71 Channel 5 188.26 -189.19 bl;,2/V ~9 dzvoJ-E2A-25 ISwT Examination Summary Record rrqet No: I: Sunmay Sheet No.: 36A .Watts Bar Nuclear Plant Unit 1 1300026 Eamination Aria: Reactor Pressure Vessel Une/Assembir Circumferential Weld W02-03 0 Identifcation:
Inservice Inspection Program Request for Relief I-ISI-17 Attachments Increment & Scan Positions Actual Examination number 4a (attachment)
Bottom Head to Lower Shell T N Ht NOE Procedure Dxan FR I Resolution CHF Met R.vJChoJCN Nuwlboets ExCer Ail. I ! Analvt Record NoJ Resflr AUT lSwT-P0I-AUT1JMtO 17-26 AUTO --AUTO for thickness measuwreMi only iCN 2 1V-20 AUTSUC40 X .CrM ECxam ion Mriled due to cole barrel support biu 17 20 AUT5S X -CbWM 21-26 AUT SLIC40T X -Co 21-26 AUTSST X -CB repared By: rD.tO: Pape: ISmry No: k g 13-Mar-05 jIorI 1300026 B.tM M.0 01 I V A/SZ  
Increment Position                                         Scan Position Scan No.(s)-
,,L IHI SOUTHWEST TECHNOLOCIES AUTOMATED ULTRASONIC EXAMINATION RECORD __Site/lPbst:
Start                   Stop                       start                       Stop 14               3974                                               18406                       19198 520404                                 22226 2318!                       271163
Watis iar Weld Identification:
                                        =                   j     _   31728                       32076
RPV-W02-03 prolReviCbg/iCN:
                                      -_     -     ___                 33109                       35500 15               4027                       _                         l8400                    22600 23.1                       2?24
lSwT.PDI-AUTIJ//0I  
: 31. 8                     3207.
&2 Elamintion No.: 17 Project No.: 04-036i Weld Descript ion: BH-to-Lwr Sh (5- I 5) Device Configuration:
33289                     35500 16               4079               _                               18400                     19213 20608                     22582
WAT-WALCON-0001 Mod.Cenf.:
_          23878                     27220 31552                       32014 33244                     35500
7A Scan Pith Drawlini:
_. _ _ _ _ _ _ _ _ _ __             _ _ _ _ t_
SP-W02-03 Exam Date _ Eaaination lime Surface Tern perature &deg;F Da AcquKsonOperator
t  _   _ _
(_ ) /SNT Level: D1vid iKleinjausll1 10 March 2005 Start End Start End I .1903 .1-.21114 78 78 Scan Coatrler Parameters lucreneat Anis Planned Actual Scam Asia Planned Atual Positional Parameters
                                          =I                                   ....-
(:ontrdler:
E2A-24
PaR Lower Limit 500 500 Lower Limit 909 909 Beam Direction:
 
l)nrup Scan: 11om Pivot Upper limit 153S 18534 Upper Limit 1965 1965 Transducer Si=z: 1.00 Incrcment:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
fluxm Rotate Increment iterval 5t DCI 3 Codc % ofOverlap:
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 4a                                                         Page 1 of 2 Watts Bar Unit 1 Bottom Ed Cap to Spherical Ring WOI-02 Cursor Box 1 of 1 Scan Axis                             188.27 - 189.20 Inc. Axis                              24.99 - 26.07 Depth In Material                      2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                              39.74 -   40.79 Scan Axis                            185.35 -   186.28 Channel 1 Feature Analysis                             Summary Comments No Recordable Indications channels 1, 2, 3, 4, and S.
10 Madc: AutumuaicScan Conversion Connts 100 Conversion Counts 100 Number of Scans: 312 Scan Motion: Hi-direclional (Conversiuw Units Degrees Conversion Units Degrees Head Routb Position:
Channel 2 Module Coordinates Inc. Axis                              39.74 - 40.79 Scan Axis                            191.20 - 192.13 Channel 3 Module Coordinates Inc. Axis Scan Axis                            185.77 - 186.70 Channel 4 Module Coordinates Inc. Axis Scan Axis                           190.78 - 191.71 Channel 5 Module Coordinates Inc..Axis Scan Axis                           188.26 - 189.19
0.00 Correction:
                                                        /V    ~9 dzvoJ-bl;,2 E2A-25
Default Radius 8.19 IRadius In. _ itl9 _1Hoist (Pivot Point): N/A Module Parameters:
 
07A Cal 13 Calibralion Reeords: Examination Notes: Stains Angle Direction Scan Offset Step Offset WAT-13 Chedc for limitations due to the proximity ofthore t lu and Cho .lo, I (n, ss-- 0S au anssirumcniaiion iubes.Channel 2 un 55 (+) 5 1.40(in) 1.35(in) 0801302 Channel 3 On SLIC 40 2.(in) + 1.72(in) 0801303 Channel 4 On SLIC 40 f+) + 2.00(in) + 1.72(in) 0801304 Examinalbin Remarks: (3wauncl5 On 01. (4) +0.00(in --1.72(in) 0F01305 Limited examination due tothe proximhiyofthecore barrel Chanlind 6 Off N/A NJA NtA N/A NIA anti-rotation lugs.Channel 7 Off N/A NMA N/A NIA NrA Chanell 8 Off NJA N/N I AIA YIIAlexamination Increment  
ISwT Examination Summary Record rrqet  No:                                          I:
&Sean Positlons Actual Recordale Indications Analyst Remarks Scan No(s) Incrnernt Position Scan Position Yes No N/A Attachmenm:
36A                                                                                                                              Sunmay Sheet      No.:
Start Stop Stat Stop Channell 0 Ol 0 3 Yes l2 No I-IS 500 1497 1410 1965 Channel2 0 0 &deg; Further Evalhation 19 -69 1550 4446 909 1965 Channel 3 0 0 Required: 70 -122 4502 7518 1480 1965 Ctsannel 4 0 E3 U Yes 23 No 123 -173 7573 10484 909 1965 Channel5 0 _ 0 (a Archive Tape/CD No.: 174 -225 It0543 13493 1410 1965 Whannel 6 0 03 (a 3 AIB 226-276 13536 16450 909 1965 Whannel 7 0 0 Analysis 1nrPe(t1)
                                        .           Watts Bar Nuclear Plant Unit 1                                            1300026 Eamination Aria:    Reactor Pressure Vessel Une/Assembir      Circumferential Weld W02-03                            0 Identifcation:    Bottom Head to Lower Shell                              T N    Ht NOE          Procedure          Dxan                  FR  I          Resolution CHF Met                            Nuwlboets R.vJChoJCN                      ExCerAil. I  !  Analvt  Record    NoJ                  Resflr                              B.
No.: __277 -312 16508 11534 1480 1965 Channel 0 0 i N/A Analyst SNT Level / Date: ._ A I & t\ , 1 -, 1I\;ca2 CCD Ui~Q 5: 0 16wr FORK Ha UT O l1et. M~lI)l w-Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 17 Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BR to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis 12.45 -13.38 17.72 -22.94 4.19 -5.35 Channel 1 18.37 -23.57 16.92 -17.85 Channel 2 18.37 -23.57 7.98 -8.91 Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Coordinates Axis Axis Channel 3 16.62 -21.84 15.90 -16.83 Channel 4 16.62 -21.84 9.00 -9.93 Channel 5 16.62 -21.84 12.45 -13.38 Channel 5 Surmary No recordable indications chs 1, 2, Feature Analysis Comments 3, & 4.dJJ-L I I fkar- Zooy E2A-28 I-M-Amazon IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Pbrolt:
AUT      lSwT-P0I-AUT1JMtO      17-26      AUTO        -    -                        AUTOfor thickness measuwreMi only iCN 2            1V-20    AUTSUC40    X    . CrM                    ECxam ion Mriled due to cole barrel support biu 17 20      AUT5S      X    - CbWM 21-26   AUT SLIC40T  X    -   Co 21-26      AUTSST      X    -   CB tM M.
Wts Bar Wee i dentlficateon:
0 01 repared By:
RP V-W02-03 Rut 99 9mination No: 17s Projt Ne.t 04-0361 l Doeo i scripte tm BH toU Lw Sh (55-185) rDevl eConeirurate:
rD.tO:                           Pape:
WAT-WALCON-WOI.
k                                                                                                              ISmry No:
nWrCoEn: o7A oSrn Path Drawtatg:
g                                         13-Mar-05                       jIorI                     1300026 I         V A/SZ
SP-eW203 Exam Date Exantitnaton Time Surree Ten Ceertre &deg;F De:s AcqAuisitio O aerator (x) I SNT Cove]: David Ro Klunjt 10 I1 10 March 2005 Start Nme d S cart Ettd J 2126. 1 .... 2135. 76 5 78 Controller:
 
Pak Lower Limit SW0 1395 3wcrLimit 9D9 909 R~earmDircti;on, LWup*can- Boom Pi-Aet Upper Until 1t53t 15242 Upper Limit 1965 1965 Iransluccr Size: 1.00 lucrement:
            ,,L                                                       IHI SOUTHWEST TECHNOLOCIES AUTOMATED ULTRASONIC EXAMINATION RECORD                                                                     __
1ineqmRotate Inrcre^cnt Interval 5t DCI 3 Code of Overlap: 10 Modc. ALIOntatiCScan Conversion Counts I100 Conversion Cowils 100 Numher orScans: 112 Seaw Motion: Hi-drectiunal Conversion Units Degrees Conversion Units Degrees Had Rotate hsitio 0.00 Correction Default Radius 83.19 Radius In. 89.19 11o0ist (Pivot Point): N/A Module Parameters:
Site/lPbst: Watis iar                                     Weld Identification: RPV-W02-03                   prolReviCbg/iCN:         lSwT.PDI-AUTIJ//0I &2         Elamintion No.:           17 Project No.: 04-036i                                     Weld Descript ion: BH-to-Lwr Sh (5- I 5)         Device Configuration: WAT-WALCON-0001 Mod.Cenf.:       7A                                     Scan Pith Drawlini: SP-W02-03                           Exam Date _             Eaaination lime                 Surface Tern perature&deg;F Da AcquKsonOperator (_) /SNT Level: D1vid               iKleinjausll1                                           10 March 2005           Start           End             Start               End I .1903                         .1-.21114               78                 78 Scan Coatrler Parameters             lucreneat Anis             Planned                   Actual     Scam Asia             Planned             Atual             Positional Parameters
O7A Cal 13 CsliirIliaS ierfi EsatnieatnNoes States Angle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the prwximity of the core stor lues and ICiunanci I on 55 l- -1.40(in) -1.35(in) 0 0801301 Ilower head insttrunenlation tubes.Channel 2 On 55 (V) 1.40(in) -1.35(n) 001302 C<lanel 3 On SLIC 40 (-) -2.O0tin) + 1.72(in) 0801303 Chainnel 4 On SLIC 40 t+ + 2.0(Kin) 172(in) 0801304 Eaominallon Remnark: (iwaiutel 5 on OL (4) + 000(LKn) + 1.72(in) 0801305 ltimited exanination duclo the proximity of the warc barrel Chlannel.6 oil N/A NIA NIA A NIA NA anii-rotatlon lOgs.Channel 7 Off N/A N/A N/A NIA N/A Channel t Off N/A N/A N/A N/A N/A Partial examination Increment  
(:ontrdler:                   PaR           Lower Limit                 500                   500         Lower Limit               909               909       Beam Direction:               l)nrup Scan:                     11om Pivot     Upper limit                 153S                   18534       Upper Limit               1965             1965       Transducer Si=z:                 1.00 Incrcment:               fluxm Rotate     Increment iterval           5t                                 DCI                     3                             Codc % ofOverlap:                   10 Madc:                 AutumuaicScan       Conversion Connts           100                               Conversion Counts         100                         Number of Scans:                   312 Scan Motion:           Hi-direclional     (Conversiuw Units           Degrees                             Conversion Units         Degrees                     Head Routb Position:             0.00 Correction:                 Default       Radius                       8.19                             IRadius In.         _       itl9                   _1Hoist (Pivot Point):               N/A Module Parameters:                   07A     Cal 13                                                       Calibralion Reeords: Examination Notes:
& Scan Positions Actual Recordable Indications Analyst Remarks Scan No(s) 1Inrenlet t'ositiun Scan Position Yes NO N/A  
Stains           Angle   Direction         Scan Offset     Step Offset                         WAT-13         Chedc for limitations due to the proximity ofthore t lu and         CCD Cho       I         (n,             ss--                                                                               0S.lo,              au anssirumcniaiion iubes.
Channel 2             un             55       (+)               51.40(in)           1.35(in)                       0801302 0
Channel 3             On           SLIC 40       -3            - 2.(in)         + 1.72(in)                         0801303 Channel 4             On         SLIC 40       f+)             + 2.00(in)       + 1.72(in)                         0801304         Examinalbin Remarks:
(3wauncl5             On             01.       (4)             +0.00(in         -- 1.72(in)                       0F01305         Limited examination due tothe proximhiyofthecore barrel Chanlind 6           Off           N/A       NJA                 NtA               N/A                             NIA             anti-rotation lugs.
Channel 7           Off             N/A       NMA                 N/A               NIA                             NrA Chanell 8           Off           NJA       N/N           I     AIA             YIIAlexamination                                                                                                       Ui~Q Increment &Sean Positlons Actual                             Recordale Indications                                                 Analyst Remarks Scan No(s)         Incrnernt Position             Scan Position                     Yes     No       N/A Attachmenm:                                                                                      5:
Start           Stop       Stat         Stop     Channell       0   Ol         0     3 Yes l2 No I-IS           500             1497       1410           1965     Channel2     0               &deg; 0  Further Evalhation 19 - 69         1550           4446       909           1965     Channel 3     0               0   Required:
70 -122         4502           7518       1480           1965     Ctsannel 4     0       E3       U             Yes 23 No 123-173           7573           10484       909           1965     Channel5       0     _ 0       (a Archive Tape/CD No.:
174 - 225 It0543                 13493     1410           1965   Whannel 6       0       03       (a             3 AIB 226-276         13536           16450       909           1965   Whannel 7       0     0           Analysis 1nrPe(t1) No.:     __
277 -312         16508           11534       1480         1965     Channel       0       0       i               N/A Analyst SNT Level / Date:                                             .                                                                                   _ A I                                 &         t\ ,-, 1                                                                            1I\;ca2 16wr FORK Ha UT O l1et. M~lI)                             l     w-
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 17                                                         Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BR to LWR Shell Cursor Box 1 of 1 Scan Axis                             12.45 - 13.38 Inc. Axis                             17.72 - 22.94 Depth In Material                       4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                              18.37 - 23.57 Scan Axis                             16.92 - 17.85 Channel 2 Module  Coordinates Inc. Axis                              18.37 - 23.57 Scan Axis                              7.98 - 8.91 Channel 3 Module Coordinates Inc. Axis                              16.62 - 21.84 Scan Axis                              15.90 - 16.83 Channel 4 Module Coordinates Inc. Axis                              16.62 - 21.84 Scan Axis                              9.00 - 9.93 Channel 5 Module Coordinates Inc. Axis                             16.62 - 21.84 Scan Axis                              12.45 - 13.38 Channel 5 Feature Analysis                            Surmary Comments No recordable indications chs 1, 2, 3, & 4.
II fkar- Zooy dJJ-L E2A-28
 
I  nWrCoEn:
            -M-Amazon Site/Pbrolt: Wts Bar Projt Ne.t 04-0361 oSrn o7A tm    Doeo i
il IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Wee dentlficateon: RPV-W02-03 scripte       BH toU Path Drawtatg: SP-eW203 Lw Sh (55-185) 99 eConeirurate: WAT-WALCON-WOI.
Exam Date 9mination Rut Exantitnaton Time rDevl Ceertre No:
Surree Ten 17s
                                                                                                                                                                                                  &deg;F De:s AcqAuisitio O           aerator (x) I SNT Cove]: David RoKlunjt I1     10                                      10 March 2005             Start             d    Nme S cart                   Ettd J 2126. 1 .... 2135.             76         5         78 Controller:                   Pak         Lower Limit                   SW0                   1395       3wcrLimit               9D9               909       R~earmDircti;on,                   LWup
*can-                   Boom Pi-Aet     Upper Until                   1t53t                 15242       Upper Limit             1965               1965       Iransluccr Size:                   1.00 lucrement:             1ineqmRotate     Inrcre^cnt Interval           5t                                 DCI                     3                           Code ofOverlap:                       10 Modc.                 ALIOntatiCScan     Conversion Counts             I100                               Conversion Cowils       100                         Numher orScans:                     112 Seaw Motion:           Hi-drectiunal     Conversion Units             Degrees                           Conversion Units         Degrees                     Had Rotate hsitio                   0.00 Correction                 Default       Radius                       83.19                             Radius In.               89.19                       11o0ist (Pivot Point):               N/A Module Parameters:                 O7A     Cal 13                                                         CsliirIliaS ierfi       EsatnieatnNoes States         Angle   Direction         Scan Offset       Step Offset                       WAT-13           Check for limitations due to the prwximity of the core stor lues and ICiunanci I           on             55       l-               - 1.40(in)         - 1.35(in)                     00801301        Ilower head insttrunenlation tubes.
Channel 2           On             55       (V)                 1.40(in)       - 1.35(n)                       001302                                                                                       0 C<lanel 3           On         SLIC 40       (-)             - 2.O0tin)         + 1.72(in)                     0801303                                                                                 1a.1 Chainnel 4           On         SLIC 40     t+               + 2.0(Kin)           172(in)                       0801304         EaominallonRemnark:
(iwaiutel 5         on             OL       (4)               + 000(LKn)         + 1.72(in)                      0801305            ltimited exanination duclo the proximity of the warc barrel Chlannel.6          oil            N/A        NIA                  NIAA            NIA                            NA              anii-rotatlon lOgs.
Channel 7           Off           N/A       N/A                   N/A             NIA                             N/A Channel t           Off           N/A       N/A                   N/A             N/A                             N/A           Partial examination Increment & Scan Positions Actual                           Recordable Indications                                                 Analyst Remarks Scan No(s)         1Inrenlet t'ositiun         Scan Position                       Yes     NO     N/A  


==Attachment:==
==Attachment:==


start Sto Start -Stop ChsannelI 0 I- 0 D Yes 12 No _ _ _ _ _ _ _ _ _ _ _ _ _I -13 13895 15242 909 1965 Channel 2 0 1 D Funher Evaluation Channel 3 0 El 0 Required: Channel4 0 2 0 D Yes l No 5Channel 5 0 0 2 Archive Tape/CD) No.: __Channel 6 0 0 2 3 A JB thannel 7 0 0 E1 Analysis TapetCr) No.: Ca_ _el 6 L 0 E NrA Analyst I SNT Level I Dolie A.-- '' I I> M ' 0 11 lS cl Ro rc1 1a.1 0 t5WTr FORM It.. IJT5 1l.'. 8*1021 \,, :
start           Sto       Start   -     Stop     ChsannelI 0           I-     0         D Yes 12 No           _     _     _     _   _   _     _     _   _     _   _     _     _
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments 3xam Number 17a Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 12.45 -13.38 14.24 -19.46 4.19 -5.35 Channel 1 148.85 -40.23 -41.16 Module Inc.Scan Coordinates Axis Axis Module Inc.Scan Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis AxiS Coordinates Axis AXiS Coordinates Axis Axis Channel 2 148.85 -344.67 -345.60 Channel 3 147.11 -152.38 36.96 -37.89 Channel 4 147.11 -152.38 347.94 -348.87 Channel S 147.11 -152.38 12.45 -13.38 Feature Analysis Comments Channel 5 Summary No recordable indications 3, & 41 chs 1, 2, J-(Li I 1ur 0o E2A-30 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitetPlast t Watts Ba IWeld Identification:
I -13         13895           15242       909           1965     Channel 2 0           1         D Funher Evaluation Channel 3 0                    0 El Required:
RPV-WD2-03 Pro/Rev/Chn/ICN:
Channel4 0           2       0       D Yes l No 55Channel 0       0         2 Archive Tape/CD) No.:       _
ISwT-PDl-AITi/0EO/1l&2 Examinath n Ne iS Project No.: 04-0363 Wel4dDescription:
_Channel 6     0     0         2           3A        JB thannel 7 0           0       E1 Analysis TapetCr) No.:
BH-to-LwrShSb 14.366 Device Conrilturaton:
Ca_       6   L   0           E             NrA M
WAT-WALCON-0__
_el Analyst I SNT Level I Dolie                                                                                                             A
Med.ConL:
                    .--               ''                                                                 '                      I I>     lS 11 0cl          Ro rc1 t5WTr FORMIt.. IJT5 1l.'. 8*1021     \,,                     :
07A Scan Path Drawin SP-W02-03 Examn Dote Examination Time Surface Tentperature IF Date Acquisition Operator (s) / SNT Level: Sergey Vinogradov  
 
/ N/A Alan Schaefer I N/A 10 March 2005 Siatt rod Start End 2142 2352 78 78 Scan Controller PoraMers Increment Axis Planned Actual Scan Ask Planned Actual Positional Parameters c(ntroller:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
PaR Lower limit 18400 1840O Lower Uimit 909 909 Beam Direction-llip Scan: ioom Pivet Upper Limit 36612 3662 pper limit 1965 1965 Tianaducer Size 1.00 Incrnentit Boom Rotate Increment Interval 5i DCI 3 Code % of Ovcrlap: 10 Mode: Automatic Scan Crnversion Counts 100 Conversion Cntrns 100 Number of Scans: 315 Scan Motion lli-directiosual Conversion Units Degrees Conversion Units Degrees Itcad Rotate Position:
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments 3xam Number 17a                                                       Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis                             12.45 -   13.38 Inc. Axis                              14.24 -   19.46 Depth In Material                      4.19 -   5.35 Channel 1 Module Coordinates Inc. Axis                            148.85 -
0.00 Correction:
Scan Axis                            40.23 - 41.16 Channel 2 Module Coordinates Inc. Axis                           148.85 -
Default Radius 88.19 Radius In. SB.19 Hoist (Pivot Point): N/A Module Parameters:
Scan Axis                            344.67 -   345.60 Channel 3 Module Coordinates Inc. Axis                          147.11 -     152.38 Scan AxiS                            36.96 -   37.89 Channel 4 Module Coordinates Inc. Axis                          147.11 -     152.38 Scan AXiS                          347.94 -     348.87 Channel S Module Coordinates Inc. Axis                            147.11 - 152.38 Scan Axis                              12.45 - 13.38 Channel 5 Feature Analysis                             Summary Comments No recordable indications chs 1, 2, 3, & 41 (Li 1ur 0o I
07A Cut 13 Calibration Records: IEsaminatlon Notes: States Antle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the proximity of the core stop Ilg and Channcl I (tn 55 (- -1.40(in) -1J33in3) uSuiui lower nca instrumnmalion tuows.Channet 2 0n 55 (+) + 1.40(in) -135(in) 0801302 Itrhannel 3 On SRC 40 (-' 2. O0(in) + 1.72(in) 0801303 tChannel4 OIn SLIC 40 (tM + 2.00(in) + 1.72(in) 0801304 Examinsation Remarks:_Cannecl5_
J-E2A-30
On 01. (0 + 0.00(in + 1.72(inj) 001305 limited examination due to the proximity ofthe core barrel mannel 6 Off N/A NIA N/A N/A NtA anti-rotation lugs.Channel 7 off N/A NIA NMA NIA NIA ChannelA r Of N/A NIA N/A NIA N/A Increment
 
* Scan Positions Actual Recordable Indications Analyst Remarks Scan Nos) Incremrei Position Scan Position Yes No NIA Attaceuntr N_start Stop Stan Stop _ _annel I O [a 0 3 Yes E2 No I ISi 18400 1939U 1482 1965 Cannel 2 0 El 0&deg; Further Evaliation 19 -69 19440 _ 22356 909 1965 Clannel 3 C l 0 Required: 70 122 22403 25419 1432 1965 Clhanne 4 l 0 0 Yes 2Z No 123- 173 25482 28390 909 1965 Channel5 0 0 2t ArchivcTaplCD No.: 274 2 225 23442 31399 1482 1965 lhannel 6 0 0 l2 N AtB 224.226 21447 _ 3435 1 909 1965 ChannelE 7 0 13 AnalysisZlape/(J
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitetPlast t Watts Ba                                       IWeld Identification: RPV-WD2-03                   Pro/Rev/Chn/ICN:       ISwT-PDl-AITi/0EO/1l&2         Examinath n Ne               iS Project No.: 04-0363                                         Wel4dDescription: BH-to-LwrShSb 14.366 Device Conrilturaton: WAT-WALCON-0__
_No.,__277 -315 34410 1 36613 1432 1965 Channel 8 n o 3 N/A Analyst I SNT Level I Date: / /-5 R .0 Z-0r C ), i.+ -a;0 o- (C) I C)to I-i a= 1~, C., 0 toj f5wr FOrlM P. U go 4a..s9sa Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 18 Page I of 2 Watts Bar Unit 1 RPV-Wo2-03 BH to LWR HD Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module coordinates Inc. Axis Scan Axis 7.10 -8.03 194.72 -199.94 2.29 -2.94 Channel 1 195.66 -200.82 10.02 -10.95 Feature Analysis Comments Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 2 195.66 -200.82 4.17 -5.10 Channel 3 193.90 -199.15 9.60 -10.53 Channel 4 193.90 -199.15 4.59 -5.52 Channel 5 193.90 -199.15 7.11 -8.04 E2A-32 IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD itePlant:
Med.ConL: 07A                                               Scan Path Drawin       SP-W02-03                         Examn Dote           Examination Time               Surface Tentperature IF Date Acquisition Operator (s)/ SNT Level: Sergey Vinogradov / N/A Alan Schaefer I N/A                               10 March 2005           Siatt           rod             Start               End 2142           2352             78                   78 Scan Controller PoraMers             Increment Axis             Planned                     Actual   Scan Ask               Planned             Actual             Positional Parameters                         -5 c(ntroller:                   PaR           Lower limit                   18400                   1840O       Lower Uimit             909               909       Beam Direction-                   llip Scan:                     ioom Pivet         Upper Limit                 36612                   3662           pper limit           1965               1965     Tianaducer Size                       1.00 Incrnentit               Boom Rotate         Increment Interval           5i                                   DCI                     3                           Code % of Ovcrlap:                     10 Mode:                 Automatic Scan         Crnversion Counts             100                                 Conversion Cntrns       100                         Number of Scans:                       315 R
Welts n. Weld Identificatior RPV-W02-03 ProlRev/iCigICN:
                                                                                                                                                                                                                          .0 0r Z
ISwT-PDI-AUTM/0/01&2 Examination No.: 19*reject No.: 04-0368 Weld
Scan Motion             lli-directiosual     Conversion Units             Degrees                             Conversion Units       Degrees                     Itcad Rotate Position:               0.00 C),
Correction:                 Default         Radius                       88.19                               Radius In.             SB.19                         Hoist (Pivot Point):                 N/A         -
i.+      a Module Parameters:                   07A     Cut 13                                                         Calibration Records: IEsaminatlon Notes:                                                         o-
                                                                                                                                                                                                                  ;0      (C) I States           Antle     Direction         Scan Offset       Step Offset                         WAT-13         Check for limitations due to the proximity of the core stop Ilg and     C)
Channcl I           (tn             55       (-               - 1.40(in)       - 1J33in3)                         uSuiui         lower nca instrumnmalion tuows.
Channet 2           0n               55       (+)               + 1.40(in)         - 135(in)                         0801302                                                                                                   C.,
0 Itrhannel 3           On           SRC 40       (-'                 2.O0(in)       + 1.72(in)                       0801303 tChannel4           OIn           SLIC 40       (tM             + 2.00(in)         + 1.72(in)                       0801304         Examinsation Remarks:                                                 to I toj
_Cannecl5_         On               01.       (0               + 0.00(in         + 1.72(inj)                       001305           limited examination due to the proximity ofthe core barrel mannel 6         Off             N/A       NIA                   N/A             N/A                               NtA             anti-rotation lugs.                                                         -i a
Channel 7           off             N/A       NIA                   NMA             NIA                               NIA ChannelA   r         Of               N/A         NIA                 N/A             NIA                               N/A                                                                                         =        1~,
Increment
* Scan Positions Actual                               Recordable Indications                                                 Analyst Remarks Scan Nos)         Incremrei Position               Scan Position                     Yes       No       NIA Attaceuntr         N_
start            Stop       Stan         Stop       _   _annel I O         [a       0         3 Yes   E2 No I           ISi 18400           1939U       1482         1965     Cannel 2     0       El       0&deg; Further Evaliation 19 - 69       19440 _           22356       909           1965     Clannel 3     C       l         0   Required:
70 122       22403             25419       1432         1965       Clhanne 4             l       0       0 Yes 2Z No 123- 173       25482             28390       909           1965       Channel5     0         0       2t ArchivcTaplCD No.:
274 2   225     23442             31399       1482         1965       lhannel 6   0         0       l2             AtB  N 224.226         21447     _     3435     1 909           1965       ChannelE 7             0       13   AnalysisZlape/(J         _No.,__
277 - 315       34410       1   36613       1432         1965       Channel 8   n         o3                      N/A Analyst I SNT Level I Date: /                   /
f5wr FOrlMP. U go 4a..s9sa
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 18                                                       Page I of 2 Watts Bar Unit 1 RPV-Wo2-03 BH to LWR HD Shell Cursor Box 1 of 1 Scan Axis                               7.10 - 8.03 Inc. Axis                            194.72 - 199.94 Depth In Material                      2.29 - 2.94 Channel 1 Module coordinates Inc. Axis                          195.66 - 200.82 Scan Axis                              10.02 - 10.95 Channel 1 Feature Analysis                             Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5 Channel 2 Module Coordinates Inc. Axis                           195.66 - 200.82 Scan Axis                              4.17 - 5.10 Channel 3 Module Coordinates Inc. Axis                            193.90 - 199.15 Scan Axis                              9.60 - 10.53 Channel 4 Module Coordinates Inc. Axis                            193.90 - 199.15 Scan Axis                                4.59 - 5.52 Channel 5 Module Coordinates Inc. Axis                            193.90 - 199.15 Scan Axis                              7.11 - 8.04 E2A-32
 
IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD itePlant: Welts n.                                           Weld Identificatior RPV-W02-03                       ProlRev/iCigICN:       ISwT-PDI-AUTM/0/01&2           Examination No.:             19*
reject No.: 04-0368                                           Weld


== Description:==
== Description:==
BH-to.Lwr Sh (5-1 5t)            Device Coufizxration:    WAT-WALUON-0_001                                ..
lod.ConI.: 07A                                                  Scam Patb Drawing: SP-W02-03                              Exam Date                Examination Time                Surface Tem perture &deg;F
_at_ AcquisitionOperar(s)/SNT Level: SereyVinogradovIN/A AlanSchoefer IA                                              II                        Start          End              Staui                End 0324      -  0401      .        73                  .78 Scan Controller Paramelers                Increment Axis                Planned                    Actual    Sc m APs                Planned            Actual              Positional Parameters ointroller.                PaR                Lower Limit                    500                      1611        Lower Limit              32509            32509      Beam Direction:                  DrnUp
;can:                      I 11ist              Upper Umit                    18538                    4445        Up limit                  34561            34561      Transducer Sizc:                    100 ncrement:              Boom    Rotatc          Increment  Interval          5S                                  DCI                      4                            Code  %  of Overlap:                  10 IW                            Number of Scans:                    312 lodc:                Automatic Scan            Conversion Counts              100                                Con(venionCounts Convession Units          btches                      Head Rolat Position:                0.00            ~  .0  Z~
kcan  Motion:          8i-directional          Conversion Units              Degrees
:orrection:                Default              Radius in.                    88.19                                                                                        Hoist (Pivot Point):                NtA Ulodule Parameters:                    7iA          Cal 03                                                            Calibration Records:  lExaninstion  Notes:                                                                    01 Sbtats            Angle        Direction          Scan Offset          Step Offset                      WAT-03          lCheck for limitations due to the proximity of the core sto I and hatnnel I        On              55            (-1                  1.40(in)            1.35(in)                      0S00301          lower head instrumentation tubes.
2        Onrt0tai Shanncl          55                              St        Ch              0 1e              0leSW3(                No                                                                                                0 2.31 Chainl      + 1.72(in)                      0t00303                                                                                    5r      I    .J9 (e
Sltanncl 3            Ol            SLIC40          320-                                                                                                                                                            K2    -0'
==2.0 0(in)haannne3ionRRemarirs==
Cliancl_4 C~hannel 5 On _
()n SIIC_40 (IL                              + 0_ C t 1.72_in) ei 1.21inl 0ltC304 0t00305    Noxamination limioed              doe to the proximity ofotic cure barre                  11      :  02j
_6__          NChannel NA  _          NtA                    N/                N/      D      2      clhitati hn N/A                              lutN Chan            ____tOff            NhA            N0A              _    Nna                NT/t                            _N/A    _.                                                                                    a.
                                                                                                                                                                                                                              -2 Channel S            Off            NtA            NIA                    N0A              N/A                            NMA Interetnent & Scstt Positions Actnel                                  Recordable Indicateios                                              Analyst Remarkss Scan No (.q)      Incremen t Position                Scan lPosition                        Yes      No      NtS Aitedurieni Da StarAnas        St              Staert          Stop      Channel I              El                    Yes F    No I - 5U        1611            4449            32509          34561      Channel 2 El          El      E Furthen Evaluati            I Channel 3 0            li      13 Required:
Canl4    a      o        o3      o Yes E3 Nto Chne  5    3    0 G        1  Arrhire 1Tape/Ll) No.:
7=                              (hatutel 6      0      03      la            3 AM            I IChaltette 7    a      c0      (?  AnalyqiTrt cl( D Nou:
_C                          thonnd S      a3      o      m              NIA Analyst I SNT Level I Dvte: AA
                                        .~K....                  ,o      ,                                            .- .                                      IN ISWT FORM N" UT sa (Rt. 01142) 1I
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 19a                                                          Page      I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis                            329.57 -    330.81 Inc. Axis                              17.72 - 22.94 Depth In Material                      4.19    - 5.35 Channel 1 Module coordinates Inc. Axis                              28.80 - 34.03 Scan Axis                            336.97 -    338.21 Channel 2 Module Coordinates Inc. AxiS                            28.80 - 34.03 Scan Axis                          322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis                            27.06 - 32.27 Scan Axis                          335.09 - 336.33 Channel 4 Module Coordinates Inc. AxiS                            27.06 - 32.27 Scan Axis                            324.05 - 325.29 Channel 5 Module Coordinates Inc. AXiS                              27.06 - 32.27 Scan AXiS                            329.57 - 330.81 Channel 5 Feature Analysis                            Summary Comments No recordable indications chs 1,            2, 3, & 4.
A
                      !i IJ        K>.KOX~J              It'        (31AEvr .2-C, 5'
[I E2A-34
I SOUTHWEST TECHNOLOGIES imp                                                AIITOMATFD TILTRASONIC EXAMINATION RECORD Site/Plnt: Watts Bar                                          lWeld Identification: RPV-W02.03                ProlRevfChigICN:    tSwT-PDI-AUtL/0/0/1&2          Examibation No.:            19b Project No: 04.036R                                            Weld Descriptiox BH4-tLwr Sh (5-1 85)          Device CoflAuration: WAT-WALCON-0001 Mod.Coar.: 07A                                                Sean Path Drawing: SP-W02-03                          Exam Date          Esamination Time                Surface Temperature &deg;F Data Acquisition Operator (s) t SNT Lvel: Sergey Vinogradov l NA Alan Schacer / NtA                                JI March 2005        Start          End            Start                End 412          0532            *78                  78 Scum Coniroller Parameters                Increment Axis              planned                Actual      aAxis              Plamat              Actual              Posilional Parameters Controller:                    PaR            Lower Limit                  500                  757S        Lower Limit          32509              32509    Beam Direction:                    Dn1Up      R-s Scan:                          lnlit            UpperUmit                  IR53R                1030        Upper Limit          34561              34561    TransducerSize:                      1.00 Incrementl                lbosnn Rotate          Increment Interval          5t                              DCI                  4                            Code % of Overlap:                    10 Mode:                  Amomrutic Scan          Consversion Counts          100                              Conversion Counts    100                        Number of Scans:                      312 Scan Motion,              Diidirectional        Conversion Units            IDgrees                          Conversion Units      Inches                        Icad Rotate Positicn:              0.00 Corredion.                    Derault            Radius in.                  88.9                                                                                Hoist (Pivot Point):                NA Module Parameters:                    07A          Cal 03                                                      CallbrationRecords:  EmiNation Notes:
Stales            Angle      Direction        Scan Offset      Step Offset                      WAT-03        Check for limitations due to the proximity of the corc stop tags and Channel I              On              55            (1)              - .4u(in)        - i.35(in)                      06;i00        b                    e t-J Chanrtnel 2            On              55            (4)+              1.40(t)          1.35(in)                      0800302                                                                                      0.
0
> Channel 3                On          SI IC 40                            2.00(m)        t 1.72(in)
                                                                                            +                              0900303                                                                            i w    tchannel 4            On            SLIC 40                        ++1
                                                                          +200(in)        + 1.72(in)                      0800304      Examination Remarbs:                                                          us Channel 5              On              01.          (4              + 0.01Kin)      + 1.72(in)                      0X00305        limited examination due to the proximit of the core barrel                  tsj us.4 (harvicl 6            Off            NMA          N/A                  NIA            N/A                            N/A          3nti-rotatims lugs.
lChannsl 7            Off            NIA          NIA                  N/A            NIA                            N/A channld                Off            NtA          NIA                  N/A            NMA                            NtA increment & Scam Positions Actual                                Recordable Indications                                            Analyst Remarts Scan No.(s)        Increment Position                Scan Position                    Yes      No      N/A Attaclunent:
Start            Stop          Stan        Stop      Channel I          f3      0          O Yes (3 No 123 - 1R0        7578              10U30        32509        34561      CLannel 2 Q        El      0 Further Evaluation
_                        __                              Channel 3 Q          2      0 Required:
_    Channel4 0          3      0          O Yes (Z No          ____
Clannel 5 0        0      El Arddvc Tape/Ct No.:
__                  Channel6 0          0      13            ZA/B
__                  Channel 7 n          0      23 Analysis TapCD No.:
Channl S    0      0      la            NJA Analyst/ SNT Level / Date:
1    1'LXK ty.                                          -l                          ' 1!\      2sb1i                0 MIWTFORM0 4 ft l  0 .(P  . 5525
                                                                          \NJ I
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 19b                                                        Page  I of 2 Watts Bar Unit 1 RPV-W02-03 SH to LWR Shell Cursor Box 1 of 1 Scan Axis                            329.57 - 330.81 Inc. AxiS                              17.72 - 22.94 Depth In Material                      4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                              89.14 - 94.34 Scan Axis                            336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis                              89.14 - 94.34 Scan Axis                            322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis                              87.40 - 92.62 Scan Axis                            335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis                            87.40 - 92.62 Scan Axis                            324.05 - 325.29 Channel 5 Module Coordinates Inc. Axis                            87.40 - 92.62 Scan Axis                            329.57 - 330.81 Channel 5 Feature Analysis                            Summary Comments No recordable indications chs 1, 2, 3, & 4.
I  O;,Mlr LooU p
:A_
E2A-36
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD
,itePlmtt: Waats BaR                                  IWeld Identification: RPV-W02-03                    Pro/RevIChiegiCN:      lSwvTPDI-AUTJJ101/l&2          Examinatlen No.:            19c
'roject Nt.: 04-036R                                    Weld Descriplion: BH-to-Lwr Sh (5&deg; 15&deg;)            Device Confliuration: WAT-WALCON-0001 fod.Conf.: 07A                                        Scan Path Drawint: SP-W02-03                              Exam Date            Examination Time                  Surface Temperatusre IF lat Acquisition Operator (s) / SNT Level: Sergey Vinegradov I N/A Alan Schaefer I N/A                          11 March 2005          Start          End              Start                End 0535        .0550          .      78                  7B Scan Controller Parameters          1ncrement Axis              Planned                    Actual    Scan Axis            Planned            Actual                Pesitional Para ers 3onlroller:                'aR          Lower iimit                  500                    13609        Lower Limit            32509            32509      1cam Direction:                    DnUtp 3can                      lI ist          Jppcr Limit                  18538                  16800        Uppr limit              34561            34561      TransducerSize                      100 ncrement:            Flotni Rolatc      Increment interval            5                                  DCI                    4                            Codc % of Overlap:                  10
%4ode:              Atitomatic Scars      Conversion(ounts              IIO                                ConversionCounts        too                          Number of Scans:                    312 3can Motion:          Fi-directional      Conveizion tIlniLs            Derecs                              Conversion Units        Inches                        Head Rotate Position:              0.00 0 a, o'eection:            Default          Roius in.                      B.19                                                                                    lHoist (Pivot Point):              N/A    0 Z Mvrodule Parameters:              07A      Cot 03                                                          Calibration Records: jExaminatioe Notes:                                                    C Status        Antle    Direction          Scan Offset        Step Offset                        WAT-03        ICheck fior limitations due to the proximity of the core stop lugs and          a, Chnnel I          On              55          *)            - 1.40(in)          - 1.35(in)                      0800301          lower head instrumentation tubes.
Channl 2 Channel 3 On On 55 SLIC 40 (tl
(.)
                                                              + 1.40(in)
                                                              - 2.00(in) 1.35(in) t 1.72(in) 0600302 o000303                                                                                WV e0 E  0 Channel 4          On          SLIC 40      (t)              I 2.00(i)          I 1.72(i)                      0800304          ERaminalion Remarks:
ChannelS            (tn            llI.      (f)              t 0.00(inm)          1.72(in)                      08003015          lIimited exanmination due to the proximity of the core barrel Channel 6          Off          NtA        NiA                    NIA              NIA                            NJA            anti-rocttion lugs.
Channel 7          Off            NJA        NJA                    N/A              N/A                            N/A Channel S          Off            NIA        N/A                    NIA              N/A                            N/A                          . .      .        ..              .
I5rZ Increment & Scan Pcsllluus Actual                              Reeordable Indicatione                                              Aunlyst Remarks Increment    Position          Scan Position ScanNa(s)        Start          Stop  I Start              Slop      Channel I Yes E3      No 0
N/A 0 Attachment!
0 Yes i29 No 127 182      13609          16804      32509          34561      Channiel 2    0      2        0    Furtha Evaluatkrn Chlannel 3    0      ii      O    Required:                                                                                          -
_(hnnel  4  0        23      0        O Yes    2a No JChannl  5  0        0      13 Archive Tape/C'D No.:
Channel 6 E          0        2            2 AIB Channel 7 0          0        El Anslysis rape/Cl) No.:
_      __                                                Coanndel    E1      0        la            NIA Analyst SNT Level / Date:            \                                                                                                                    LI 5mawrFOaM me.UTso gao.trsSl)


BH-to.Lwr Sh (5-1 5t) Device Coufizxration:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
WAT-WALUON-0_001
Inservice Inspection Program Request for Relief 1-ISI- 17 Attachments Page 1 of 2
..lod.ConI.:
.xam Number 19c Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis                           329.57 - 330.81 Inc. Axis                             17.72 - 22.94 Depth In Material                       4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                           149.46 - 154.67 Scan AXiS                            336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis                            149.46 - 154.67 Scan AxiS                            322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis                           147.71 - 152.93 Scan Axis                            335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis                            147.71 - 152.93 Scan Axis                            324.05 - 325.29 Channel 5 Module Coordinates Inc. Axis                          147.71 - 152.93 Scan Axis                          329.57 - 330.81 Channel 5 Feature Analysis                            Summary Comments No re cordable indications chs 1, 2, 3, & 4 il-         I't l ,Af ,oQ,8 E2A-38
07A Scam Patb Drawing: SP-W02-03 Exam Date Examination Time Surface Tem perture &deg;F_at_ AcquisitionOperar(s)/SNT Level: SereyVinogradovIN/A AlanSchoefer IA I I Start End Staui End 0324 -0401 .73 .78 Scan Controller Paramelers Increment Axis Planned Actual Sc m APs Planned Actual Positional Parameters ointroller.
 
PaR Lower Limit 500 1611 Lower Limit 32509 32509 Beam Direction:
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD itelPlaut:     Watts Bar                               Weld Identifaleton: RPV-W02-03                     Pro1Rev/Cks/ICN:         ISwT-PDI-AUTI/0/0/l &2
DrnUp;can: I 11ist Upper Umit 18538 4445 Up limit 34561 34561 Transducer Sizc: 100 ncrement:
'reject No.: 04-0368                                   Weld Dcsripotio: BH-4O-Lsr Sh (14U.366- Device Conftiurmtion: WAT-WALCON-0M00                               EIamIKSIIO No.:           2Dc 2ed.Conf.: 07A                                                 Path Drawing: SP-W02-03 aScu                                                  Exam Dale             Ex minsfion Time                 Surface Temp rature IF lots AcquIsition Operator(s)/ SNT Level: Sergey Vinogradow I N/A Also Schaefer/ NA                               11March 2005           Stil           End             Start               End 0559           0617             7B                 78 Seart Controller Parameters       Increment Axis               Planned                   Actual     Scan Axis                                 Adcul
Boom Rotatc Increment Interval 5S DCI 4 Code % of Overlap: 10 lodc: Automatic Scan Conversion Counts 100 Con(venionCounts IW Number of Scans: 312 kcan Motion: 8i-directional Conversion Units Degrees Convession Units btches Head Rolat Position:
                                                                                                                                                    -lanned               Positliaul Parameters PaR Pontroller: Lower Limit                     18400                   19446       Lower Limit             32509             32509     Beam Direction                   /Up can:                     lidst         iUpper Limit                 36612                   22754       Upper Limit             34561             34561     Transducer Sire:                 1.011 ncremcent:             MItom Rot3ae     Increment Interval             5R                                   DI('                   4                             Code % of Overlap:                 10
0.00:orrection:
-ode:               Attomatic Samn     Conversion Counts               100                                 Conversion Counts         to0                         Number ofScans:                   315 can Motion:           Hi-directionai   CInnversion Units             l)egrees                             Cinversion Units         Inches                       leardRotate Position:           0.00
Default Radius in. 88.19 Hoist (Pivot Point): NtA Ulodule Parameters:
                                                                                                                                                                                                                      ~ .0        Z:
7iA Cal 03 Calibration Records: lExaninstion Notes: Sbtats Angle Direction Scan Offset Step Offset WAT-03 lCheck for limitations due to the proximity of the core sto I and hatnnel I On 55 (-1 1.40(in) 1.35(in) 0S00301 lower head instrumentation tubes.Shanncl 2 On 55 rt0tai St Ch 1e 0 0leSW3( No Sltanncl 3 Ol SLIC40 320- 2.31 Chainl + 1.72(in) 0t00303 Cliancl_4 On SIIC_40 _ 2.00(in) t 1.72_in) 0ltC304 haannne3ionRRemarirs:
lorrection:               Default       Radius In.                     38.19                                                                                     FHoist (Pivot Point):             NIA vlodule Parameters:             07A     Cal 03                                                           Calibration Records: Elamimation Notes:                                                                         4 Status         Angle   Direction         Scso Offsel         Step Offset                                                                                                                   . 0      '- i0 WAT.03         ICheck for limitations due to the roximity ofthecore stop tuR. and I       Oninne          55         - '             - I An(;.,%       - t3Iis'                           efI. 1                                                                             0;      "    "!7            0 2hancl 2             On             55       (t                   1.40im           - 1.35(i)                       0t00302 0
C~hannel 5 ()n (IL + 0_ C ei 1 .21inl 0t00305 N limioed oxamination doe to the proximity ofotic cure barre_6__ N _ Channel NA NtA N/ N/ N/A D 2 clhitati hn lutN Chan ____t Off NhA N0A _ Nna NT/t ._N/A _Channel S Off NtA NIA N0A N/A NMA Interetnent
    "annel3        On           Sue 40     (-)               - 2.00(in)         + 1.72(in)                       08w303                                                                               E;    jP..            r 2hanhel 4           On           SlsC40     (1i               I 2.0K(in)         4 1.726n)                       0S0(l304         Examination Remiarks:                                                                           t.-
& Scstt Positions Actnel Recordable Indicateios Analyst Remarkss Scan No (.q) Incremen t Position Scan lPosition Yes No NtS Aitedurieni StarAnas St Staert Stop Channel I El D a Yes F No I -5U 1611 4449 32509 34561 Channel 2 El El E Furthen Evaluati I Channel 3 0 li 13 Required: Canl4 a o o3 o Yes E3 Nto Chne 5 3 0 G 1 Arrhire 1Tape/Ll)
bin 1iaNuscl 5         On             01.       ( m)             + 0.Wx(1in)         I I .72(i)                     08003(05           Limited examination due in the proximity of the core barrel
No.: 7= (hatutel 6 0 03 la 3 AM I IChaltette 7 a c0 (? AnalyqiTrt cl( D Nou:_C thonnd S a3 o m NIA Analyst I SNT Level I Dvte: AA.~K .... IN .- .,o ,~ .0 Z~0 1 5r I .J9 (e K2 -0'11 :-2 a.0 02j ISWT FORM N" UT sa (Rt. 01142)1I Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 19a Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 329.57 -330.81 17.72 -22.94 4.19 -5.35 Channel 1 28.80 -34.03 336.97 -338.21 Module Inc.Scan Module Inc.Scan Module Inc.Scan Module Inc.Scan coordinates Axis Axis Coordinates AxiS Axis Coordinates Axis Axis Coordinates AxiS Axis Channel 2 28.80 -34.03 322.17 -323.41 Channel 3 27.06 -32.27 335.09 -336.33 Channel 4 27.06 -32.27 324.05 -325.29 Module Inc.Scan Coordinates AXiS AXiS Channel 5 27.06 -32.27 329.57 -330.81 Channel 5 Summary chs 1, 2, Feature Analysis Comments No recordable indications 3, & 4.A! i IJ K>.KOX~J It'[I 1A Evr .2-C, (3 5'E2A-34 imp I SOUTHWEST TECHNOLOGIES AIITOMATFD TILTRASONIC EXAMINATION RECORD-Site/Plnt:
_banncl 6           Olf           N/A       NIA                   N/A               NIA                             N/A             anti-rfaXtinn lurs.
Watts Bar lWeld Identification:
lIafncl 7           (if'           N/A       N/A                   N/A             N/A                             NtA 0        L          et uannel t           Off           NIA       N/A                   N/A               N/A                   .       N/A                                   .
RPV-W02.03 ProlRevfChigICN:
Incrmeat &oSeaa Positions Actual                       l       tReordnble Indlcatioas                                             Analyst Remarks Scan No.(s)       Increment Position           Scan Position                       Yes     No       NtA  
tSwT-PDI-AUtL/0/0/1&2 Examibation No.: 19b Project No: 04.036R Weld Descriptiox BH4-tLwr Sh (5-1 85) Device CoflAuration:
WAT-WALCON-0001 Mod.Coar.:
07A Sean Path Drawing: SP-W02-03 Exam Date Esamination Time Surface Temperature
&deg;F Data Acquisition Operator (s) t SNT Lvel: Sergey Vinogradov l NA Alan Schacer / NtA JI March 2005 Start End Start End 412 0532 *78 78 Scum Coniroller Parameters Increment Axis planned Actual aAxis Plamat Actual Posilional Parameters Controller:
PaR Lower Limit 500 757S Lower Limit 32509 32509 Beam Direction:
Dn1Up Scan: lnlit UpperUmit IR53R 1030 Upper Limit 34561 34561 TransducerSize:
1.00 Incrementl lbosnn Rotate Increment Interval 5t DCI 4 Code % of Overlap: 10 Mode: Amomrutic Scan Consversion Counts 100 Conversion Counts 100 Number of Scans: 312 Scan Motion, Diidirectional Conversion Units IDgrees Conversion Units Inches Icad Rotate Positicn:
0.00 Corredion.
Derault Radius in. 88.9 Hoist (Pivot Point): NA Module Parameters:
07A Cal 03 CallbrationRecords:
EmiNation Notes: Stales Angle Direction Scan Offset Step Offset WAT-03 Check for limitations due to the proximity of the corc stop tags and Channel I On 55 (1) -.4u(in) -i.35(in) 06;i00 b e t-J Chanrtnel 2 On 55 (4)+ 1 .40(t) 1.35(in) 0800302> Channel 3 On SI IC 40 t 2.00(m) + 1.72(in) 0900303 w tchannel 4 On SLIC 40 ++1 +200(in) + 1.72(in) 0800304 Examination Remarbs: Channel 5 On 01. (4 + 0.01Kin) + 1.72(in) 0X00305 limited examination due to the proximit of the core barrel (harvicl 6 Off NMA N/A NIA N/A N/A 3nti-rotatims lugs.lChannsl 7 Off NIA NIA N/A NIA N/A channld Off NtA NIA N/A NMA NtA increment
& Scam Positions Actual Recordable Indications Analyst Remarts Scan No.(s) Increment Position Scan Position Yes No N/A Attaclunent:
Start Stop Stan Stop Channel I f3 0 O Yes (3 No 123 -1R0 7578 10U30 32509 34561 CLannel 2 Q El 0 Further Evaluation
_ __ Channel 3 Q 2 0 Required:_ Channel 4 0 3 0 O Yes (Z No ____Clannel 5 0 0 El Arddvc Tape/Ct No.:__ Channel6 0 0 13 ZA/B__ Channel 7 n 0 23 Analysis TapCD No.: Channl S 0 0 la NJA Analyst / SNT Level / Date: ty. 1 1'LXK -l ' 1!\ 2sb1i 0 R-s i us.4 0.0 us tsj MIWT FORM0 4 ft l 0 (P ..5525\NJ I Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 19b Page I of 2 Watts Bar Unit 1 RPV-W02-03 SH to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. AxiS Depth In Material Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis 329.57 -330.81 17.72 -22.94 4.19 -5.35 Channel 1 89.14 -94.34 336.97 -338.21 Channel 2 89.14 -94.34 322.17 -323.41 Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Coordinates Axis Axis Channel 3 87.40 -92.62 335.09 -336.33 Channel 4 87.40 -92.62 324.05 -325.29 Channel 5 87.40 -92.62 329.57 -330.81 Channel 5 Summary Feature Analysis Comments No recordable indications chs 1, 2, 3, & 4.: A_I O ;,Mlr LooU p E2A-36 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD ,itePlmtt:
Waats BaR IWeld Identification:
RPV-W02-03 Pro/RevIChiegiCN:
lSwvTPDI-AUTJJ101/l&2 Examinatlen No.: 19c'roject Nt.: 04-036R Weld Descriplion:
BH-to-Lwr Sh (5&deg; 15&deg;) Device Confliuration:
WAT-WALCON-0001 fod.Conf.:
07A Scan Path Drawint: SP-W02-03 Exam Date Examination Time Surface Temperatusre IF lat Acquisition Operator (s) / SNT Level: Sergey Vinegradov I N/A Alan Schaefer I N/A 11 March 2005 Start End Start End 0535 .0550 .78 7B Scan Controller Parameters 1ncrement Axis Planned Actual Scan Axis Planned Actual Pesitional Para ers 3onlroller:
'aR Lower iimit 500 13609 Lower Limit 32509 32509 1cam Direction:
D nUtp 3can lI ist Jppcr Limit 18538 16800 Uppr limit 34561 34561 TransducerSize 100 ncrement:
Flotni Rolatc Increment interval 5 DCI 4 Codc % of Overlap: 10%4ode: Atitomatic Scars Conversion (ounts IIO ConversionCounts too Number of Scans: 312 3can Motion: Fi-directional Conveizion tIlniLs Derecs Conversion Units Inches Head Rotate Position:
0.00 o'eection:
Default Roius in. B.19 lHoist (Pivot Point): N/A Mvrodule Parameters:
07A Cot 03 Calibration Records: jExaminatioe Notes: Status Antle Direction Scan Offset Step Offset WAT-03 ICheck fior limitations due to the proximity of the core stop lugs and Chnnel I On 55 *) -1.40(in) -1.35(in) 0800301 lower head instrumentation tubes.Channl 2 On 55 (tl + 1.40(in) 1.35(in) 0600302 Channel 3 On SLIC 40 (.) -2.00(in) t 1.72(in) o000303 Channel 4 On SLIC 40 (t) I 2.00(i) I 1.72(i) 0800304 ERaminalion Remarks: ChannelS (tn llI. (f) t 0.00(inm) 1.72(in) 08003015 lIimited exanmination due to the proximity of the core barrel Channel 6 Off NtA NiA NIA NIA NJA anti-rocttion lugs.Channel 7 Off NJA NJA N/A N/A N/A Channel S Off NIA N/A NIA N/A N/A ..... .Increment
& Scan Pcsllluus Actual Reeordable Indicatione Aunlyst Remarks Increment Position I Scan Position Yes No N/A Attachment!
ScanNa(s)
Start Stop Start Slop Channel I E3 0 0 0 Yes i29 No 127 182 13609 16804 32509 34561 Channiel 2 0 2 0 Furtha Evaluatkrn Chlannel 3 0 ii O Required:_(hnnel 4 0 23 0 O Yes 2a No JChannl 5 0 0 13 Archive Tape/C'D No.: Channel 6 E 0 2 2 AIB Channel 7 0 0 El Anslysis rape/Cl) No.:_ __ Coanndel E1 0 la NIA Analyst SNT Level / Date: \ LI 5mawr FOaM me. UTso gao. trsSl)0 Z 0 a, W e V 0 E C I 5 rZ-a, 0 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1 -ISI- 17 Attachments Page 1 of 2.xam Number 19c Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Inc.Scan Module Inc.Scan Coordinates Axis AXiS Coordinates Axis AxiS 329.57 -330.81 17.72 -22.94 4.19 -5.35 Channel 1 149.46 -154.67 336.97 -338.21 Channel 2 149.46 -154.67 322.17 -323.41 Channel 3 Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Coordinates Axis Axis 147.71 -152.93 335.09 -336.33 Channel 4 147.71 -152.93 324.05 -325.29 Channel 5 147.71 -152.93 329.57 -330.81 Channel 5 Summary cordable indications chs 1, 2, 4 Feature Analysis Comments No re 3, &il-I't l ,A f ,oQ,8 E2A-38 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD itelPlaut:
Watts Bar Weld Identifaleton:
RPV-W02-03 Pro1Rev/Cks/ICN:
ISwT-PDI-AUTI/0/0/l  
&2'reject No.: 04-0368 Weld Dcsripotio:
BH-4O-Lsr Sh (14U.366-Device Conftiurmtion:
WAT-WALCON-0M00 EIamIKSIIO No.: 2Dc 2ed.Conf.:
07A aScu Path Drawing: SP-W02-03 Exam Dale Ex minsfion Time Surface Temp rature IF lots AcquIsition Operator(s)/
SNT Level: Sergey Vinogradow I N/A Also Schaefer/
NA 11 March 2005 Stil End Start End 0559 0617 7B 78 Seart Controller Parameters Increment Axis Planned Actual Scan Axis -lanned Adcul Positliaul Parameters Pontroller:
PaR Lower Limit 18400 19446 Lower Limit 32509 32509 Beam Direction  
/Up can: lidst iUpper Limit 36612 22754 Upper Limit 34561 34561 Transducer Sire: 1.011 ncremcent:
MItom Rot3ae Increment Interval 5R DI(' 4 Code % of Overlap: 10-ode: Attomatic Samn Conversion Counts 100 Conversion Counts to0 Number of Scans: 315 can Motion: Hi-directionai CInnversion Units l)egrees Cinversion Units Inches leard Rotate Position:
0.00 lorrection:
Default Radius In. 38.19 FHoist (Pivot Point): NIA vlodule Parameters:
07A Cal 03 Calibration Records: Elamimation Notes: Status Angle Direction Scso Offsel Step Offset WAT.03 ICheck for limitations due to the roximity ofthecore stop tuR. and inne I On 55 -' -I An(;.,% -t3Iis' efI. 1 2hancl 2 On 55 (t 1.40im -1.35(i) 0t00302"annel 3 On Sue 40 (-) -2.00(in) + 1.72(in) 08w303 2hanhel 4 On SlsC40 (1i I 2.0K(in) 4 1.726n) 0S0(l304 Examination Remiarks: 1iaNuscl 5 On 01. ( m) + 0.Wx(1in)
I I .72(i) 08003(05 Limited examination due in the proximity of the core barrel_banncl 6 Olf N/A NIA N/A NIA N/A anti-rfaXtinn lurs.lIafncl 7 (if' N/A N/A N/A N/A NtA uannel t Off NIA N/A N/A N/A .N/A .Incrmeat &o Seaa Positions Actual l tReordnble Indlcatioas Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No NtA  


==Attachment:==
==Attachment:==


Start Stop Start Op Channel I 13 0 ] 0 O Yes la No 19 19446 22755 3250t9 34561 Channel 2 O El 0 Further Evaluation tl__ _cl 3 0 El 0 Required: Channcl 4 O i 03 &deg; Yesa No Channel5 03 0 El Archive TapefCL) No.: Channel6 0 0 13 2 A/B__annel 7 0 Q GI Analysis Tape/Cl) No.:_ Chantnel t O 0 3i NIA Antlysl / SNT Level I Daoe jII , Y rck goCJ&sect;F \ ) Eil tirl\ 20A~ .0 Z:.0 '-4 i 0 0; " "!7 E; jP.. r 0 L et 0 0 bin t.-15111 FORM NP. Us sa t5. SRFt I l Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request f:r Relief 1-ISI-17 Attachments Exam Number 20a Page l of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR RD Shell Cursor Box I of 1 Scan Axis Inc. Axis Depth In Material Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis 329.57 -330.81 196.72 -201.94 4.19 -5.35 Channel 1 207.79 -213.02 336.97 -338.21 Channel 2 207.79 -213.02 322.17 -323.41 Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Coordinates AXiS Axis Channel 3 206.07 -211.29 335.09 -336.33 Channel 4 206.07 -211.29 324.05 -325.29 Channel 5 206.07 -211.29 329.57 -330.81 Feature Analysis Comments Channel 5 Summary No recordable indications chs 1, 2, 3, & 4.,kA B t I- .I I E2A-40 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD NitelPlmnt:
Start           Stop       Start           Op       Channel I 130            ]     0       O Yes la     No 19     19446           22755     3250t9         34561         Channel 2 O           El       0 Further Evaluation tl__ _cl 3 0           El       0 Required:
Watts Har _Weld Identification:
Channcl 4 O             i     &deg; 03          Yesa     No Channel5 03           0       El Archive TapefCL) No.:
RPV.W02.03 ProfRev/Ch1CN:
Channel6 0           0       13           2 A/B
lSwT-PDI.AUTI//0/l&2 E ( No 20b Project No.: 04-036S Weld
__annel 7     0       Q       GI   Analysis Tape/Cl) No.:
_   Chantnel t O         0       3i             NIA Antlysl / SNT Level I Daoe                               ,                                                  jII                         Y rck goCJ&sect; 15111  FORMNP.Us sat5.
F               \       )       Eil tirl\ 20A SRFtI                              l
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request f:r Relief 1-ISI-17 Attachments Exam Number 20a                                                     Page l of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR RD Shell Cursor Box I of 1 Scan Axis                           329.57 - 330.81 Inc. Axis                            196.72 - 201.94 Depth In Material                      4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                            207.79 - 213.02 Scan Axis                            336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis                            207.79 - 213.02 Scan Axis                            322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis                           206.07 - 211.29 Scan Axis                            335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis                            206.07 - 211.29 Scan Axis                            324.05 - 325.29 Channel 5 Module Coordinates Inc. AXiS                            206.07 - 211.29 Scan Axis                            329.57 - 330.81 Channel 5 Feature Analysis                           Summary Comments No recordable indications chs 1, 2, 3, & 4.
                    ,kA         B                     t I-   I .I E2A-40
 
1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD NitelPlmnt:   Watts Har _Weld                                   Identification: RPV.W02.03             ProfRev/Ch1CN:         lSwT-PDI.AUTI//0/l&2           E       (       No         20b Project No.: 04-036S                                     Weld


== Description:==
== Description:==
BH4o-Lwr Sb (S4.-366        Device Confi nration: WAT-WALCON-001 Mod.Conf: 07A                                            Sean Path Drawin . SP-W02-03                        Exam Date              Examxina ion Time                Surface Temperature cF Data Acquisition Operalor (a)/ SNT LevCI: Sergey Vinogradov/ N/A Alan Schaefer IN/A                          I March 2005            Stsrt          End              Stabr              End 0621          0636              t                  1 Scum Coatroller Parminelers        lncrerem    t Asis          Planned                Actual    Scoa                  'Ai Planned            Actual                Positloaln Paraeters Controller:                PaR          Lower Limit                  18400                25472      Lower Umit              32509            32509      Beam Direction:                  Dn/Up Scan:                      1t1ist        Upper limit                  36612                28677      Upper Limit            34561            34561      Transducer Size:                    1.00 Increment:                wmm  Rotate    Increment Interval            5o                              DCI                    4                            Code % of'Overlap:                    10 Mode:                Autoinnti Scea      Cinversirm Counts              100                            Conversion Couais      100                          Number oflScans:                    315 Scan Motion:          Bi-dircctional    Conversion Units              Dcgrees                        Conversion Units        itches                      Head Rotale Position!              0.00 Cunection:                Default        Radius In.                  88.19                                                                                lloist (Pivot Point):                N/A Module Parameters:                07A      Cal 03                                                      Calibration Records:  Examiastion Notes:
__Sttits _ - Ale      1  Direction          Scan Offset      Step Offset                    WAT-03          Check for limitations due to the proxinity of the core St  itt  and          LTI Channel I          On              55        (                - 1.40(in)        1.35(in)                    0800301        tower head instrumertation tubes.
Channel 2          On              55          +              + 1.40fini        135(in)                    0100302                                                                                        0 Channel 3          On            SIC40        (-                - 2.00(in)      + 1.72(in)                    0S00303                                                                                        0, Channicl 4        (In          StIUC40    L')                + 2.00(in)        1.72(in)                    0300304        Exnmiaalion Remarks:
Channel5            On            0.1      ()                + 0.00(il          1.72(in)                    0300305            limited exanihantlon due t( the proximity ofthe core barrel        oto Channel 6            (1T          N/A        N/A                  NIA            NA                            NIA            anti-rotation luIs.
Channel 7            Off            NIA      N/A                  NIA            N/A                          NMA                                                                                    9O4 Channel 1            Off            NIA      N/A                  NIA            N/A                          NIA Increment & Scan Positions Actual                              Recordable Indieatlons                                          Anebtt Remaris Scan No.(S)      Increment Position              Scan Position                    Yes      No      N/A Attaciment:
Stan            s          Start          Stop      Channel I 0        1(      0        l Yes 2 No 123- 171      25473            28666      32509          34561      Channel 2 0        E3      0 Funther Evaluation Channel 3 0        El      0  Reqtired:
Clmantel4 0        [a      0          Yes G No
_Charnel  5  0      0        2  A      Tape/CD No.:
vchive            _
__anncl  6 0          0      [a            2AtB
_Channel 7  0      0      2  Anaysis Tape/CD No.:                    _.
Channel3 O          0      El            N/A AnalystI SNT Level Date.                                                        n_          A ton 15WORK      us T. a..t-sea2


BH4o-Lwr Sb (S4.-366 Device Confi nration: WAT-WALCON-001 Mod.Conf:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Techanical Engineers (ASME)
07A Sean Path Drawin .SP-W02-03 Exam Date Examxina ion Time Surface Temperature cF Data Acquisition Operalor (a) / SNT LevCI: Sergey Vinogradov/
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments exam number 20b                                                       Page I of 2 Watts Bar Unit 1 RPV-W02-03 BR to LWR HD Shell Cursor Box 1 of 1 Scan Axis                           329.57 - 330.81 Inc. Axis                            196.72 - 201.94 Depth In Material                      4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                            268.13 - 273.30 Scan Axis                            336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis                           268.13 - 273.30 Scan Axis                            322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis                            266.37 -     271.60 Scan Axis                            335.09 -     336.33 Channel 4 Module Coordinates Inc. AxiS                            266.37   - 271.60 Scan Axis                            34.05     - 325.29 Channel 5 Module Coordinates Inc. Axis                            266.37 - 271.60 Scan Axis                            329.57 - 330.81 Channel S Feature Analysis                              Summary Comments No recordable indications chs 1, 2, 3, & 4 .
N/A Alan Schaefer IN/A I March 2005 Stsrt End Stabr End 0621 0636 t 1 Scum Coatroller Parminelers lncrerem t Asis Planned Actual Scoa 'Ai Planned Actual Positloaln Paraeters Controller:
                  ,A-it R;- 2rc'S E2A-42
PaR Lower Limit 18400 25472 Lower Umit 32509 32509 Beam Direction:
 
Dn/Up Scan: 1t1ist Upper limit 36612 28677 Upper Limit 34561 34561 Transducer Size: 1.00 Increment:
iHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD iltePlant :     Watis Bar                                       lWdd Identification: RPV-W02-03                       Pra/Rev/Chg/ICN:       ISwT-PDI-AUTI1/0/Irlh2           Examinatin No.:             20c
wmm Rotate Increment Interval 5o DCI 4 Code % of'Overlap:
?roject No.: 04-0368                                             WeldDescriptlo.: BH-to-LwrSh(184'-366' DeviceConriguration: WAT-WALCON-0001 ded.Cona.: 07A                                                 IScan Path Drawing: SP-Wt2.03                               Exam Date             Examinati.a Time                 Surface Temreratre IF
10 Mode: Autoinnti Scea Cinversirm Counts 100 Conversion Couais 100 Number oflScans:
)ata Acquisition Operator (s)/ SNT Level: Serey Vinogradev / N/A Alt. Schaefer J N/A                                       Il March 2005           Start           End             Start               End 0638             0659             78                   78 Scan Centroller Paramleters                 Increment Ails             Platted                     Actual     Scan Ails             Plaxned             Actoal               Positional Parameters eontrolla:                   PaR               Lower Limit                   1400                     31385       Lower Limit             32509             32509       Beam Direction:                 DnlUp                  R.
315 Scan Motion: Bi-dircctional Conversion Units Dcgrees Conversion Units itches Head Rotale Position!
icanr                         loist             UpperLimit                   36612                   34590       Upperlifmit             34561               34561       TransducerSize:                   1.00 ncremenl:               Poom Rotalc             Increment Interval           5S                                   DCI                     4                             CodeofOverlap:
0.00 Cunection:
Mtode:                 AutIomatieScan             Convcrsion Countis             OO                                   Conversion Counts         100                           Number of.Scans:
Default Radius In. 88.19 lloist (Pivot Point): N/A Module Parameters:
10            ( 0 -. ~
07A Cal 03 Calibration Records: Examiastion Notes:__Sttits _ -Ale Direction Scan Offset Step Offset 1 WAT-03 Check for limitations due to the proxinity of the core St itt and Channel I On 55 ( -1.40(in) 1 .35(in) 0800301 tower head instrumertation tubes.Channel 2 On 55 + + 1.40fini 135(in) 0100302 Channel 3 On SIC40 (- -2.00(in) + 1.72(in) 0S00303 Channicl 4 (In StIUC40 L') + 2.00(in) 1.72(in) 0300304 Exnmiaalion Remarks: Channel5 On 0.1 () + 0.00(il 1.72(in) 0300305 limited exanihantlon due t( the proximity ofthe core barrel Channel 6 (1T N/A N/A NIA NA NIA anti-rotation luIs.Channel 7 Off NIA N/A NIA N/A NMA Channel 1 Off NIA N/A NIA N/A NIA Increment
315 3can Motion:             tli-lirctth8ml           Cnmvcerion U1its             Degrees                               Conversion Units         Inches
& Scan Positions Actual Recordable Indieatlons Anebtt Remaris Scan No.(S) Increment Position Scan Position Yes No N/A Attaciment:
* Iead Route Position:               0.00
Stan s Start Stop Channel I 0 1( 0 l Yes 2 No 123- 171 25473 28666 32509 34561 Channel 2 0 E3 0 Funther Evaluation Channel 3 0 El 0 Reqtired: Clmantel 4 0 [a 0 Yes G No_Charnel 5 0 0 2 A vchive Tape/CD No.: ___anncl 6 0 0 [a 2 AtB_Channel 7 0 0 2 Anaysis Tape/CD No.: _.Channel 3 O 0 El N/A Analyst I SNT Level Date. n _ A 15WORK ton T. us a.. t-sea2 oto 9O4 LTI 0 0, Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Techanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments exam number 20b Page I of 2 Watts Bar Unit 1 RPV-W02-03 BR to LWR HD Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 329.57 -330.81 196.72 -201.94 4.19 -5.35 Channel 1 268.13 -273.30 336.97 -338.21 Module Inc.Scan Coordinates Axis Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Inc.Scan Coordinates AxiS Axis Channel 2 268.13 -273.30 322.17 -323.41 Channel 3 266.37 -271.60 335.09 -336.33 Channel 4 266.37 -271.60 34.05 -325.29 Channel 5 266.37 -271.60 329.57 -330.81 Channel S Summary No recordable indications chs 1, 2, 3, & 4 .Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments ,A-it R;- 2rc'S E2A-42 iHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD iltePlant
.orrection:                 Default             Radius hI.                   33.19                                                                                         Hoist (Pivot Point):         . NA Module Parameters:                     07A           Cal 03                                                           Calibration Records: lEsamination Notes:                                                                 1          f4 Status             Angle         Direction         Scan Offset       Stop Offset                         WAT-03         lCheck Eor   limitations due to the proximity of te core sto l   and
: Watis Bar lWdd Identification:
_.hannd I             On               ;5                               - ix4tsin)       - i.3in)                           0800301           lower heed instrumentation lubes.
RPV-W02-03 Pra/Rev/Chg/ICN:
channcl 2             On               55             I               + 1.40(in)       - 1.35(in)                         0800302 Lhannel 3             On             SLIC 40             -)           - 2.00(in)       a 1.72(in)                         0800303                                                                                 (12    -          02 02
ISwT-PDI-AUTI1/0/Irlh2 Examinatin No.: 20c?roject No.: 04-0368 WeldDescriptlo.:
''hannel 4             t             Sl.IC 40         (I )               2.00(in)       + 1.72(in)                         0800304           Examination Remarks:                                                         54 9    "M-P-
BH-to-LwrSh(184'-366' DeviceConriguration:
'hannel       _     On               01.           (I )               0.00(m8)       f 1.72(in)                         0800305           Limited exomnination due to the proximity of tie core barrel             0 ~    CD0Q        t~.)
WAT-WALCON-0001 ded.Cona.:
Channel6             Off             N/A             N/A                   N/A             N/A                                 N/A             anti-rotation lugs.
07A IScan Path Drawing: SP-Wt2.03 Exam Date Examinati.a Time Surface Temr eratre IF)ata Acquisition Operator (s) / SNT Level: Serey Vinogradev  
Channel 7             Off             N/A             N/A                   N/A             NIA                                 N/A                                                                                             =-a.
/ N/A Alt. Schaefer J N/A Il March 2005 Start End Start End 0638 0659 78 78 Scan Centroller Paramleters Increment Ails Platted Actual Scan Ails Plaxned Actoal Positional Parameters eontrolla:
ChannelS             Off             N/A             N/A                   N/A             N/A                                 N/A   .
PaR Lower Limit 1400 31385 Lower Limit 32509 32509 Beam Direction:
a      . -.
DnlUp icanr loist UpperLimit 36612 34590 Upperlifmit 34561 34561 TransducerSize:
Increrneat & Scan Positions Actual                                   Recordable       fndications                                             Analyst Remarks Scan No (s)       Increment PosItIon                   Scan Position                     Yes       No       N/A Attacdunent:
1.00 ncremenl:
Start             Stop           Stan           Stop     ClIannel I O           El       &deg;       O Yes E No                                                                                                       '4 225 - 2g0       313j8             34583           32509         34561     Chnnel 2 0             El       0 Further Evaluadin                                                                                                 MJ Channel 3 O           la         0 Required:
Poom Rotalc Increment Interval 5S DCI 4 CodeofOverlap:
___                       Channel4 0             l         D         03Yes 0 No
10 Mtode: AutIomatieScan Convcrsion Countis OO Conversion Counts 100 Number of.Scans:
                                  .                                             Channel 5 0             0         G   Archive Tape/CD No.:
315 3can Motion: tli-lirctth8ml Cnmvcerion U1its Degrees Conversion Units Inches
_     *_ _                                   Chanel O           0         0             2 N__t
* Iead Route Position:
_                  Channcl 7 0]           0         El( Analysis Tape/CD No.:
0.00.orrection:
                                          .________channEl                                             0         01             N/A Analyst / SNT Le")I/Date:
Default Radius hI. 33.19 Hoist (Pivot Point): .NA Module Parameters:
                                            '                               j                                         II'                 I I_    prcW                     &deg;&deg; IsW't   areoNa UTMs t5.O9esc
07A Cal 03 Calibration Records: lEsamination Notes: Status Angle Direction Scan Offset Stop Offset WAT-03 lCheck Eor limitations due to the proximity of te core sto l and_.hannd I On ;5 -ix4tsin) -i.3in) 0800301 lower heed instrumentation lubes.channcl 2 On 55 I + 1.40(in) -1.35(in) 0800302 Lhannel 3 On SLIC 40 -) -2.00(in) a 1.72(in) 0800303''hannel 4 t Sl.IC 40 (I ) 2.00(in) + 1.72(in) 0800304 Examination Remarks: 'hannel _ On 01. (I ) 0 .00(m8) f 1.72(in) 0800305 Limited exomnination due to the proximity of tie core barrel Channel6 Off N/A N/A N/A N/A N/A anti-rotation lugs.Channel 7 Off N/A N/A N/A NIA N/A ChannelS Off N/A N/A N/A N/A N/A .Increrneat  
                                                                    \ NZ
& Scan Positions Actual Recordable fndications Analyst Remarks Scan No (s) Increment PosItIon Scan Position Yes No N/A Attacdunent:
 
Start Stop Stan Stop ClIannel I O El &deg; O Yes E No 225 -2g0 313j8 34583 32509 34561 Chnnel 2 0 El 0 Further Evaluadin Channel 3 O la 0 Required:___ Channel4 0 l D 03 Yes 0 No.Channel 5 0 0 G Archive Tape/CD No.:_ *_ _ Chanel O 0 0 2 N__t_ Channcl 7 0] 0 El( Analysis Tape/CD No.:.________channEl 0 01 N/A Analyst / SNT Le")I /Date: I I ' I_ j ' I prcW &deg;&deg;R.( 0 -.~1 f4 (12 -02 54 9 "M -P-0 ~ CD0 Q=- a.a .-.'4 MJ 02 t~.)IsW't areo Na UTMs t5.O9esc\ NZ Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief l-ISI-17 Attachments E;:am Number 20c Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR HD Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 329.57 -330.81 196.72 -201.94 4.19 -5.35 Channel 1 327.29 -332.49 336.97 -338.21 Module Inc.Scan Coordinates Axis Axis Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axi s Coordinates Axis AXiS Coordinates Axis Axis Channel 2 327.29 -332.49 322.17 -323.41 Channel 3 325.52 -330.76 335.09 -336.33 Channel 4 325.52 -330.76 324.05 -325.29 Module Inc.Scan Coordinates Axis Axis Channel 5 325.52 -330.76 329.57 -330.81 Feature Analysis Comments Channel 5 Summary No recordable indications chs 1, 2.3, & 4.Qxv\ Ck) -KL.&,, it I I Nt ,OC.T E2A-44 M RIHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Ote/Plant:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Watts Bar Weld Identification:
Inservice Inspection Program Request for Relief l-ISI-17 Attachments E;:am Number 20c                                                         Page     1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR HD Shell Cursor Box 1 of 1 Scan Axis                             329.57 - 330.81 Inc. Axis                            196.72 - 201.94 Depth In Material                        4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                            327.29 - 332.49 Scan Axis                            336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis                             327.29 - 332.49 Scan Axi s                            322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis                            325.52 - 330.76 Scan AXiS                            335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis                            325.52 - 330.76 Scan Axis                            324.05 - 325.29 Channel 5 Module Coordinates Inc. Axis                           325.52 - 330.76 Scan Axis                            329.57 - 330.81 Channel 5 Feature Analysis                             Summary Comments No recordable indications chs 1,       2.
RPV-W02 03 Pro/Rev/ChgICN:
3, & 4.
ISwT-PDJ-AUT/IOt&2 Eraminetion Ne 21'ro eet No.: 04-036t Weld
Qxv\             Ck) -KL.&,         it     I I Nt   ,OC.T E2A-44
 
M                                                       RIHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Ote/Plant: Watts Bar                                     Weld Identification: RPV-W02 03                   Pro/Rev/ChgICN:         ISwT-PDJ-AUT/IOt&2           Eraminetion Ne               21
'ro eet No.: 04-036t                                     Weld


== Description:==
== Description:==
BH-to-Lwr Sh (5-60)            Devie Conflituralion: WAT-WALI2ON-0001 dlod.Conf.: 07B                                          Scan Path Drawlin. SP-W02-03                            Exam Date            Examination Timne                Surface Ter perature IF latt Acquisition Operator (s) / sNT Level: Sergey Viangrado, I N/A Alan Sehaeler t NIA                          II March 2005          Start          End              Start                End 0019          0050                78.                  7S Scam Cuntratter Parameters          lIaerement Axis            rFaised                  Actual    Scon Axis              Planned            Adual                Poesitional Parameters                -i ontroller                  PaR          Lower Urnil.                  33395                33395        Lower Limit            500              500        Beam Directien                    CwlCcw kan:                    Doom Rotaic        U rlimit                      34925                34926        U per Limit            6002              6002      Transducer Size:IdIl ncrement:                    loist        lncrement Interval            90                                DCI                    3                            Code % of Overlap:                    lI vl0dr:                Autinmatic Scan      Cnverioni(Counts              100                              Conversion (Cunts        100                        Number of Scans:                      It
;cMnMotion:            Di-directiosal    Conversion Units              Inches                            Conversion Units        lcgrees                      Head Rotate Positioe              90.00
  ,orrection:                )crault                                                                      lRadius In.              12.19                        l foist (Pivot Point):              NA rlodnle Parameters:                  078      CAI 33 Status          Angle  Directie Calibration Recerds:  Examination Notes:
e-v (5 0    Z Senn Offset        Step Offset                      WAT-33        ICheck for limitations due to tbe proximity of the core stOp tugs and aarknei I        On              55        (4)              4 1.40(in)        - 1.35(i)                        0503301        lowerhead instrumentation tubes.                                                        0-
  -hannel 2          Off            55        (.)1.40(im)                          1.35(in)                      0503302                                                                              0 0
-hannel 3            On            SLIC 40      (1)              + 2,t0(in)        + 1.72(in)                      0803303                                                                                                Os 3hmmel 4            (n            Sl K 4t      (-I              - 2.t0(ini)        1.72(in)                      0333304        Examination Remarks:
:hanncl 5            On              01.      ()                F 0,O(wn)          1.72(in)                      08033t5          Limited examination due to the proximity of the core barrel ZhanulM 6            off            N/A        NIA                  N(A            NA                                NA            anti-rotation tugs.
hannel 7          (S1            N/A        N/A                  NtA            N/A                              N/A
-hannel 11          01              NIA        N/A                  NIA            NtA                              WA                                                                                  0QZ Increment & Scan Positions Actual                            Recordable Indications                        ______                Analyst Remarks I-tn w    -.
Scan No.(s)        urernmeli Position          Scan Position                    Yes      No        NIA


BH-to-Lwr Sh (5-60) Devie Conflituralion:
==Attachment:==
WAT-WALI2ON-0001 dlod.Conf.:
07B Scan Path Drawlin. SP-W02-03 Exam Date Examination Timne Surface Ter perature IF latt Acquisition Operator (s) / sNT Level: Sergey Viangrado, I N/A Alan Sehaeler t NIA II March 2005 Start End Start End 0019 0050 78. 7S Scam Cuntratter Parameters lIaerement Axis rFaised Actual Scon Axis Planned Adual Poesitional Parameters ontroller PaR Lower Urnil. 33395 33395 Lower Limit 500 500 Beam Directien CwlCcw kan: Doom Rotaic U r limit 34925 34926 U per Limit 6002 6002 Transducer Size:IdIl ncrement:
loist lncrement Interval 90 DCI 3 Code % of Overlap: lI vl0dr: Autinmatic Scan Cnverioni(Counts 100 Conversion (Cunts 100 Number of Scans: It;cMn Motion: Di-directiosal Conversion Units Inches Conversion Units lcgrees Head Rotate Positioe 90.00 ,orrection: )crault lRadius In. 12.19 l foist (Pivot Point): NA rlodnle Parameters:
078 CAI 33 Calibration Recerds: Examination Notes: Status Angle Directie Senn Offset Step Offset WAT-33 ICheck for limitations due to tbe proximity of the core stOp tugs and aarknei I On 55 (4) 4 1.40(in) -1.35(i) 0503301 lowerhead instrumentation tubes.-hannel 2 Off 55 (.)1.40(im) 1.35(in) 0503302-hannel 3 On SLIC 40 (1) + 2,t0(in) + 1.72(in) 0803303 3hmmel 4 (n Sl K 4t (-I -2.t0(ini) 1.72(in) 0333304 Examination Remarks::hanncl 5 On 01. () F 0,O(wn) 1.72(in) 08033t5 Limited examination due to the proximity of the core barrel ZhanulM 6 off N/A NIA N(A NA NA anti-rotation tugs.hannel 7 (S1 N/A N/A NtA N/A N/A-hannel 11 01 NIA N/A NIA NtA WA Increment
& Scan Positions Actual Recordable Indications
______ Analyst Remarks Scan No.(s) urernmeli Position Scan Position Yes No NIA


==Attachment:==
Start            Stop      Slart    I Stop          Channel    0I      [          0      OD YCs E1 No 1 -13        33395          34474      1472          4532        Channel2 0          Gl        D fUrther Evaluation
: 14. IS        34565          34926      500          6002        Charnel3 0          la        0 Required:                                                                                                (Ti Chuiunel4 0                  a0a      0 Yes 13 No Channel i          a        21 Archive Tape/CD No.                    _
___                                  Channcl 6  0      0        El            3 AIH
____ et 7 O        n        El Analysis  lapet) No.la Analyst I SNT Level I Date:,
C___ _nel _0          0i      21            NWA t~l \<-                                                            tl      c4.'ilY\oCC            50 tsWTrFOEHN. ls156 M.. 3t&2)      S.
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief l-ISI-17 Attachments                  _
ixam Number 21                                                        Page  I of 2 Watts Bar Unit 1 RPV-Wo2-03 BH to LWR Shell Cursor Box. 1 of 1 Scan Axis                              8.36 - 9.29 Inc. Axis                          342.87 - 350.97 Depth In Material                      6.62 - 7.78 Channel 1 Module Coordinates Inc. Axis                          343.85 -
Scan Axis                            2.09 - 3.02 Channel 2 Module Coordinates Inc. Axis                            343.85 -
Scan Axis                            14.63 - 15.56 Channel 3 Module Coordinates Inc. Axis                          341.19 - 349.26 Scan Axis                              3.80 - 4.73 Channel 4 Module Coordinates Inc. Axis                          341.19    -  349.26 Scan Axis                            12.92  -  13.85 Channel 5 Module Coordinates Inc. Axis                          341.19    -  349.26 Scan Axis                              8.36  -  9.29 Channel S Feature Analysis                            Summary Comments No recordable indications chs 1, 2, 3,  & 4'.
Ad                  C~~~~      -1Trr  -4M1  f I' M-r1005 E2A-46


Start Stop Slart I Stop Channel 0I 0 [ D O YCs E1 No 1 -13 33395 34474 1472 4532 Channel2 0 Gl D fUrther Evaluation
_AMO!                                                           11HI SOUTHWEST TECHNOLOGIES 1ql                                           AUTOMATED ULTRASONIC EXAMINATION RECORD Ite/Plant: Watts Bar                                     IWekd Ideatltflation: RPV-W02403                   Pro1RecvCht lCN:         ISwT-PDI-AUTI/           lhWI&2 Exanion Ne                   22 relect No.: 04-0368                                       Wetd
: 14. IS 34565 34926 500 6002 Charnel 3 0 la 0 Required: Chuiunel4 0 0a a 0 Yes 13 No Channel a i 21 Archive Tape/CD No. ____ Channcl 6 0 0 El 3 AIH____ et 7 O n El Analysis lapet) No.la C___ _nel _ 0 0i 21 NWA Analyst I SNT Level I Date:, t~l tl \<- c4 .'ilY\ oCC 50-i0 Z e-v (5 0 I-tn w -.(Ti 0-0 Os tsWTrFOEHN.
ls156 M.. 3t&2) S.
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief l-ISI-17 Attachments
_ixam Number 21 Page I of 2 Watts Bar Unit 1 RPV-Wo2-03 BH to LWR Shell Cursor Box. 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 8.36 -9.29 342.87 -350.97 6.62 -7.78 Channel 1 343.85 -2.09 -3.02 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Channel 2 343.85 -14.63 -15.56 Channel 3 341.19 -349.26 3.80 -4.73 Channel 4 341.19 -349.26 12.92 -13.85 Channel 5 341.19 -349.26 8.36 -9.29 Channel S Summary No recordable indications chs 1, 2, 3, & 4'.Ad C~~~~ -1Trr -4M1 f I' M-r1005 E2A-46
_AMO! 11HI SOUTHWEST TECHNOLOGIES 1ql AUTOMATED ULTRASONIC EXAMINATION RECORD Ite/Plant:
Watts Bar IWekd Ideatltflation:
RPV-W02403 Pro1RecvCht lCN: ISwT-PDI-AUTI/
lhWI&2 Exanion Ne 22 relect No.: 04-0368 Wetd


== Description:==
== Description:==
BH-toLwr Sh (59.1200) Devic CoDriuratlon: WAT-WALCON-0001 lod.Conf.t 07B                                            Sea Path Drawin: SP-W02403                                Earoo Date            Eamlinalion Time                    Surface Ten erature OF lat. Acquisition Operator (s) I SNT ievel: Alan Schaefer I NA                                                      II March 2005            StartI          End                Start                End
                                                                                                                        --                    006            0116              .78          *.      78 Scan Controller Parameters          Increment Axis              Plnned              l      Actul      Senn Atis                IPitanid            Achnl      l        Positional Parametm ontraller.              PaR                      Limit                31395                      9owee Lower Limit 33395                                  5900                5900        Beam Direction:                Cw/Ccw
-can:                  Boom Rotate          Uppcr Limit                    34925                  34927        Upper limit                12002              12002      Transducer Sim:                    1.00 ocrement:
dodc:
Hoist Automatic Scnn Increment Interval Convcrsiam ('otnts 90 100 1C[
:onversion Counts 3
100 Code % of Overlap:
Number (If Sams:
10 IF            4n
;can Motion:          Di-dircclional        CQ11vCrsn It to tS            Inches                              Conversion Units          Degrees                          Head Rotate Position:            90.00            9't orrection:                eault                                                                              Radius In.                U.19                            Hoist (Pivot Point):                N/A tlodtle Parameters:              078          Cu 13                                                            Calibration Records: IExasmlaatien Notes:                                                                fcoM.
Status          AnlNe        Direction          Sena Offset      Step Offset                          WAT-1 3        JCheck for limitations due to the roximity of the core sto lugs and
:hannel I        trn            55            (7)                4 1.40(in)        - 1.35(iD)                          0803301        lower head instrurnentation tubes.
lhannel 2          on            55            (- )                1.40(in)        - 1.35(nm)                          0803302    __
lIanncl 3          Oni        SIXt 40          (1)                4 2.00(in)        + 1.72(in)                          0803303                                                                                                    0
-hannel 4          On          SIlO 4t0        (-)              - 2.00(in)          t 1.72(in)                          0803304        Examination Remarks:                                                                        or
.hanntl 5          On            01.                t0.00                  )        + 8.72(in)                          0803305              nimited'exsmination due to the proximity of the core barrel
-hanneJ 6          o6r            N(A          N/A                    NfA              N/A                                NiA            uiti-rotation lu ianne 27          oIf            NA            NIA                    NA              NtA                                N/A
-hannelS          Off            N/A          NIA                    N/A              N/A                                N/A rn -
Increment & Scan Positions Actual                                Recordable Indleatons                                                    Analysi Remarks S0Q Sca NO(-)      Incrcmntc Position                St:i l'osition                      Yes      No      N/A  Atlachrnent:
3St              Stop          Start          Stop      Channcelt          0          C 0          O Yes 1S NO I *13      33395          3447-          7469            10832      C hannel 2 0          el      &deg;    I:urther Evaluation 14 - 1      34568          34927          5900            12002      Channel 3 0          El      0    Required:
Clanne14              12D    0&deg;                Yes E No Channel 5 0          0        la  Archive Tape/CD No.:
____Channel    6    0        03      la1              3 AB            _    _    _    _    _  _  _    _    _    _    _    _ _  _  _  _
                =                              _                _          Chanoel 7 0          g0        l  Analysis    Tape/Cl) N.<
_  _liannclS                                        0        0        2                NA Analyst / SNT Level / Daten                                                                                              I    J                    2    A SA To mFORKN.
U      TsaQSN2) '
t".            \  _
                                                                                                                                                                                                                  -I


BH-toLwr Sh (59.1200)
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Devic CoDriuratlon:
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 22                                                       Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of I Scan Axis                             62.36 - 63.29 Inc. Axis                          342.87 - 350.97 Depth In Material                      4.19 - 5.35 channel 1 Module Coordinates Inc. Axis                          343.87 -
WAT-WALCON-0001 lod.Conf.t 07B Sea Path Drawin: SP-W02403 Earoo Date Eamlinalion Time Surface Ten erature OF lat. Acquisition Operator (s) I SNT ievel: Alan Schaefer I NA II March 2005 StartI End Start End--006 0116 .78 *. 78 Scan Controller Parameters Increment Axis Plnned l Actul Senn Atis IPitanid Achnl l Positional Parametm ontraller.
Scan Axis                            57.89 - 58.82 Channel 2 Module Coordinates Inc. Axis                           343.87 -
PaR 9owee Limit 31395 33395 Lower Limit 5900 5900 Beam Direction:
Scan Axis                              66.83 - 67.76 Channel 3 Module Coordinates Inc. Axis                            341.18 - 349.27 Scan Axis                            58.91 - 59.84 Channel 4 Module Coordinates Inc. Axis                           341.18 - 349.27 Scan Axis                            65.81 - 66.74 Channel 5 Module Coordinates Inc. Axis                          341.18 - 349.27 Scan Axis                            62.36 - 63.29 Channel 5 Feature Analysis                             Summary Comments No reecordable indications chs 1, 2, 3, & 4.
Cw/Ccw-can: Boom Rotate Uppcr Limit 34925 34927 Upper limit 12002 12002 Transducer Sim: 1.00 ocrement:
                  -t-'n- HeNJA-l                 E ~       lik t   r2 c u E2A-48
Hoist Increment Interval 90 1C[ 3 Code % of Overlap: 10 dodc: Automatic Scnn Convcrsiam
 
('otnts 100 :onversion Counts 100 Number (If Sams: I F;can Motion: Di-dircclional CQ11vCrsn I t to tS Inches Conversion Units Degrees Head Rotate Position:
I
90.00 orrection:
[HI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD ite/Plant: Watts Bar                                         Wdd ldeatificstion: RPV-WO2-03                       Pre/Rev/CitsgICN:         ISwT-PDl-AUIJ'10/0011e&2       Exsnzior ND.                 23 rojet Na.: 04-0361                                           WeldDescriptias: BH-to-LWtSh(lt             1R10')DeviceCorfi tration: WAT-WALCON-0001 fod.Conf.: 0713                                               Scam Path Drawiac: SP-W02-03                                 Exam Date             Ezamination Time                 Surface Temperatre OF iat. Acquisitlon Operalor (a)I SNT Level: Alan               Schaefer I NIA                                               Il March 2005           Start           End               Start               End 0125           0134               73                 78.
eault Radius In. U. 19 Hoist (Pivot Point): N/A tlodtle Parameters:
Scttn Contrelter Paranmters             Incremneat As1a             Plmn-od                     Acdtal       oSen Axis             Planned             Actual               Psattional Parameters onlToller:                     PaR           Lower Limit                   33395                   33395         LowerLimit                 11900             11900     Beam Direction:                   CwfCcw         B-i can:                       Boom Rotale       Upperim it                     34925                   34926         I ppaLiUnit               1002             11002     Transducer Size:                     1.00 acresncnt:                     Itoist         Increment Interval           90                                     DCI                       3                           Code % of Overlap:                     10 4ode:                   Autostnlic Scan     CtAvskion Counts               100                                                 Cerela6 Ona Counts     100                         Number of Scans:                       IS can Motion:               Di-directiotnal     Conversion Units               Inchcs                                 Conversion Units           Degrees                     Head Rotate Position:             90.00 0    Z
078 Cu 13 Calibration Records: IExasmlaatien Notes: Status AnlNe Direction Sena Offset Step Offset WAT-1 3 JCheck for limitations due to the roximity of the core sto lugs and:hannel I trn 55 (7) 4 1.40(in) -1.35(iD) 0803301 lower head instrurnentation tubes.lhannel 2 on 55 (- ) 1.40(in) -1.35(nm) 0803302 __lIanncl 3 Oni SIXt 40 (1) 4 2.00(in) + 1.72(in) 0803303-hannel 4 On SIlO 4t0 (-) -2.00(in) t 1.72(in) 0803304 Examination Remarks:.hanntl 5 On 01. t0.00 ) + 8.72(in) 0803305 nimited'exsmination due to the proximity of the core barrel-hanneJ 6 o6r N(A N/A NfA N/A NiA uiti-rotation lu ianne 2 7 oIf NA NIA NA NtA N/A-hannelS Off N/A NIA N/A N/A N/A Increment
.orrection;                   Deiulth                                                                              Radius               In S                               l.oist (Pivot Point):               N/A     I0 I-O. .
& Scan Positions Actual Recordable Indleatons Analysi Remarks Sca NO(-) Incrcmntc Position St:i l'osition Yes No N/A Atlachrnent:
dodule Parameters:                     07B       Cal 13                                                             Culibratlom Records: lEsamination Notes:
3St Stop Start Stop Channcelt 0 C 0 O Yes 1S NO I *13 33395 3447- 7469 10832 C hannel 2 0 el &deg; I:urther Evaluation 14 -1 34568 34927 5900 12002 Channel 3 0 El 0 Required: Clanne14 12D 0 &deg; Yes E No Channel 5 0 0 la Archive Tape/CD No.:____Channel 6 0 03 la1 3 AB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _= _ _ Chanoel 7 0 g0 l Analysis Tape/Cl) N.<_ _liannclS 0 0 2 NA Analyst / SNT Level / Daten I J 2 A 9't 4 n f co M.rn -S0Q 0 or SA To mFORKN. U Tsa ' t". QSN2) \ _-I Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 22 Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of I Scan Axis Inc. Axis Depth In Material 62.36 -63.29 342.87 -350.97 4.19 -5.35 channel 1 343.87 -57.89 -58.82 Module Inc.Scan Coordinates Axis Axis Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Channel 2 343.87 -66.83 -67.76 Channel 3 341.18 -349.27 58.91 -59.84 Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Channel 4 341.18 -349.27 65.81 -66.74 Channel 5 341.18 -349.27 62.36 -63.29 Feature Analysis Comments No re 3, &!-t- 'n- HeNJA-l Channel 5 Summary ecordable indications chs 1, 2, 4.E ~ lik t r2 c u E2A-48 I[HI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD ite/Plant:
M Status           Angle     Direction         Scan Offset       Slep Offset                           WAT-13         ICheck for limitations due to the proximity of the care stop lugs and hanncl I               On             55         ()               + 1.40(in)         - 1.35(in)                           0803301         lower head instrumentation tubes.
Watts Bar Wdd ldeatificstion:
.hannel 2               On             5-                             1,40(in)       -   1.35(i)                           0803302                                                                                               0
RPV-WO2-03 Pre/Rev/CitsgICN:
'hanel 3               lis           SLK1C40       (f)             + 2.00(im)           I 1.72(in)                         0303303
ISwT-PDl-AUIJ'10/0011e&2 Exsnzior ND. 23 rojet Na.: 04-0361 WeldDescriptias:
:-annet 4               On           S C40         (-)             - 2.00()           + 1.72(in)                           003304           Esamination Remarks:
BH-to-LWtSh(lt 1R10')DeviceCorfi tration: WAT-WALCON-0001 fod.Conf.:
Shannel 5               On             01-         (4)             + 0.t"in)           + 1.72(n)                           0303305           Limited extuaination due to the proximity of the corc barrel hasnnel 6             oR1             N/A         NrA                                                                                                                                                                       #21 NtA               N/A                                 NIA             anti-rotation lugs.
0713 Scam Path Drawiac: SP-W02-03 Exam Date Ezamination Time Surface Temperatre OF iat. Acquisitlon Operalor (a) I SNT Level: Alan Schaefer I NIA Il March 2005 Start End Start End 0125 0134 73 78.Scttn Contrelter Paranmters Incremneat As1a Plmn-od Acdtal oSen Axis Planned Actual Psattional Parameters onlToller:
hannel 7             OfI             N/A         NMA                 N/A               N/A                                 N/A 3tnncl a                 Off           N/A         N/11A               N/A               NIA                                 N/A Increment & Sca PoSltions Actual                                 Recordabte Indications                                                   Analyst Remarks Sean No.a)           Incremeust Position             Scan Position                       Yes     No       NIA  
PaR Lower Limit 33395 33395 LowerLimit 11900 11900 Beam Direction:
CwfCcw can: Boom Rotale Upper im it 34925 34926 I ppaLiUnit 1002 11002 Transducer Size: 1.00 acresncnt:
Itoist Increment Interval 90 DCI 3 Code % of Overlap: 10 4ode: Autostnlic Scan CtAvskion Counts 100 On a Cerela6 Counts 100 Number of Scans: IS can Motion: Di-directiotnal Conversion Units Inchcs Conversion Units Degrees Head Rotate Position:
90.00.orrection; Deiult h Radius S In l.oist (Pivot Point): N/A dodule Parameters:
07B Cal 13 Culibratlom Records: lEsamination Notes: Status Angle Direction Scan Offset Slep Offset WAT-13 ICheck for limitations due to the proximity of the care stop lugs and hanncl I On 55 () + 1.40(in) -1.35(in) 0803301 lower head instrumentation tubes..hannel 2 On 5- 1,40(in) -1.35(i) 0803302'hanel 3 lis SLK1C40 (f) + 2.00(im) I 1.72(in) 0303303:-annet 4 On S C40 (-) -2.00() + 1.72(in) 003304 Esamination Remarks: Shannel 5 On 01- (4) + 0.t"in) + 1.72(n) 0303305 Limited extuaination due to the proximity of the corc barrel hasnnel 6 oR1 N/A NrA NtA N/A NIA anti-rotation lugs.hannel 7 OfI N/A NMA N/A N/A N/A 3tnncl a Off N/A N/11A N/A NIA N/A Increment  
& Sca PoSltions Actual Recordabte Indications Analyst Remarks Sean No.a) Incremeust Position Scan Position Yes No NIA  


==Attachment:==
==Attachment:==


Start Stop Start Stop Channel I O la 0 O Yes EZ No _I -13 33395 34474 33436 16335 Channel 2 0 El D Further Evaluation 14 -11 34565 34926 11900 18002 Channel 3 0 21 0 Required: Cliannel 4 0 la 0 O Yes 21 No__ thannel 5 0 0 El Archive rape/CD No.:_Channcl 6 0 0l la 3 A/Bl r Channel 7 0 0 Et Analysis Tape/Cl) No.: I_ Channel 8 0 l21I N/A I knalyst SNT Leve I Date-.'rtI [I JA~rcz1-5 A B-i 0 :. 0 Z I0 I-O. .M#21 0 SWIF r ro .M.. Ursa j v. 0*i)I Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI- 17 Aftachments 3xam Number 23 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Page 1 of 2 Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Inc.Scan Module Inc.Scan Coordinates AxiS Axis Coordinates Axis Axis Module Coordinates Inc. Axis Scan Axis 122.36 -123.29 342.87 -350.97 4.19 -5.35 Channel 1 343.86 -117.89 -118.82 Channel 2 343.86 -126.83 -127.76 Channel 3 341.19 -349.26 118.91 -119.84 Channel 4 341.19 -349.26 125.81 -126.74 Channel 5 341.19 -349.26 122.36 -123.29 Channel 5 Summary No recordable indications chs 1, 2, 3, & 4.Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Feature Analysis Comnents( 1014 S E2A-50 I I M Uk 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitemPlant:
Start           Stop         Start         Stop       Channel I O           la       0           O Yes EZ No                   _
WattsiOar Weld Identification:
I -13           33395           34474       33436         16335       Channel 2 0                     D Further Evaluation El 14 -11           34565           34926       11900         18002       Channel 3 0           21       0 Required:
RPV-WO2-03 Pro1Rev/ChZ/ICN!
Cliannel 4 0             la     0           O Yes 21 No
ISwT-PDI-AUTI/Itl/O/&2 Examinatlon No.: 24 Frejet No.: 04-036X _ _ WeId Desrription:
__                          thannel 5 0           0         El Archive rape/CD No.:
BHt-o-Lwr Sh (I79'-240 Dftevce Cont; iration: WAT1WAI.CON-000 1 Mod.ConL:
_Channcl 6 0               0l     la               3 A/Bl r                             Channel 7 0           0         Et Analysis Tape/Cl) No.:
07R IScan Path Drawing: SP-WC2-03 Learn Date Examination Time SurfaceTent eraturelF Data Acquisition t imralor (s) I SNT level: Alan Schaefer I N/A I I March 2005 Start End Start End Sttan Controller Fxrnielgirs Increment Axsh Plantted Actual Scan Axis Plxanned Actul.J Positionsl Paramener Conlroller:
Channel 8 I_                      0         l21I             N/A           I knalyst SNT Leve I Date-
PaR Lower limit 33395 33395 Lower Limit 17900 17900 Beam Direction:
                                                                                                                      .'rtI                 [I JA~rcz1-5 A SWIF      . M..roUrsa r j      v. 0*i)
Cw/Ccw Scan: Inoum ROWtle Upper limit 34925 34926 Upper Limit 24002 24002 Transducer Size: t.00 Increment:
I
I I ism IncrCnHcIt Ilcerval 90 D(:l 3 C:dcof svrlap le Mode: Auloninatic Scan Conveisbin Counts 1002 Conversion Counls I00 NuMber ofrScaUs:
 
18 Scan MWiltin: tli-dircctiusal Cortvcrsion Ihlits Inches Conversion Unils Degrecs Head Rowate Position 90.00 Correction:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Ocriault iusIn. SSIY Hoist_(ivotPoint):
Inservice Inspection Program Request for Relief 1-ISI- 17 Aftachments 3xam Number 23                                                       Page  1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis                           122.36 - 123.29 Inc. Axis                           342.87 - 350.97 Depth In Material                     4.19 - 5.35 Channel 1 Module Coordinates Inc. AxiS                            343.86 -
NIA Modute rarameters:
Scan Axis                           117.89 - 118.82 Channel 2 Module Coordinates Inc. Axis                            343.86 -
a7H Cml 13 Calibration Records: ERamination Notes: Status Angle Directlon Stan Offset Step Offset WAT-13 (lhs for limitations due to th proximity of the core stop lugs and Channeil Ii ____n_ h trumattation tubes.Cltannct 2 On__ 55 ( .) _ I tO(in; 1.35tin) 08M33tl2 tbanndl3 -Onl Sllt 40- (4) _ 4 21m.tOi) _ 1
Scan Axis                            126.83 - 127.76 Channel 3 Module Coordinates Inc. Axis                            341.19 - 349.26 Scan Axis                            118.91 - 119.84 Channel  4 Module Coordinates Inc. Axis                            341.19 - 349.26 Scan Axis                            125.81 - 126.74 Channel 5 Module Coordinates Inc. Axis                            341.19   - 349.26 Scan Axis                            122.36   - 123.29 Channel 5 Feature Analysis                            Summary Comnents No recordable indications chs 1, 2, 3, & 4.
* 72(in) CS03303 __ _Chavnncl 4 of) SlIlt_40' tg Wh t 1.72(ini)
tL.A--
C08.3D~4 Yxiitnitition Remarkes: Chantnacl S Oi &deg; l , li)_t1.72Zin
(\      1014     S E2A-50
_ O033D5 _ _ Iimtited examinathon disc ta the pFULxxmtte of ttle corc bturei C hanncl fi _)f NIA _ NJA_ NMA N/A _ nti-roatlion lups.Chhnnel 7 tnlf N.A N:M NMA N/A NA ChCannal N5A t NMA MA N/A NA __A Increment  
 
&Scat Positions Actuat Recordabl Ind:alion Analyst Remarks Scan No.($) InuericntII losillun __an l wilion Yes No NIA Atlachttent:
I                                                                           1111 SOUTHWEST TECHNOLOGIES I
_11 Slr!_q 9t _ Ston Channel I U El 11n Yes 21 No _1 -13 3339S 34474 19472_ 2VWJ Channeil2 U [3] 01 further Evahiatbon
AUTOMATED ULTRASONIC EXAMINATION RECORD SitemPlant:   WattsiOar                                   Weld Identification: RPV-WO2-03 Frejet No.: 04-036X                                                                                          Pro1Rev/ChZ/ICN!         ISwT-PDI-AUTI/Itl/O/&2           Examinatlon No.:
_ __14 -15 34565 34926w 1790tl 24t)U2_ Channel 3 U3 13 &deg; RcqU!Fed: C_ .hanncl 4 EJ 91 O3 O Yes [a No .(:hwulcl S (I O (D Archlive Tape/CD No.-___ _ Channel 6 El CI1 3A & U _C hannel 7 0] n [3 Analysks'IlpeCVlNo.:
_         _                 WeId Desrription: BHt-o-Lwr Sh (I79'-240                                                                                                 24 Mod.ConL: 07R                                                                                                Dftevce Cont;iration: WAT1WAI.CON-000 1 IScan Path Drawing: SP-WC2-03                             Learn Date             Examination Time Data Acquisition t imralor (s)I SNT level: Alan Schaefer I N/A                                                                                                               SurfaceTent eraturelF I March 2005             Start           End             Start                 End Sttan Controller Fxrnielgirs           Increment Axsh             Plantted Conlroller:                                                                                      Actual     Scan Axis               Plxanned             Actul.J PaR           Lower limit                 33395                                                                                               Positionsl Paramener                        -5 33395     Lower Limit               17900             17900       Beam Direction:
___C _ _(httnel S O O NM _A Atnalyst / SPIT I[vel I Date: _ A VAx q.j11Ircl;kt
Scan:                   Inoum ROWtle         Upper limit                 34925                                                                                                                         Cw/Ccw 34926     Upper Limit               24002               24002       Transducer Size:
-5 0 8'OZ V -~ 0" I 94I .t I tj 1531 FORUMN.. UT M URlt- 5Y111 Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 24 Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 182.36 -183.29 342.87 -350.97 4.19 -5.35 Channel 1 343.87 -177.89 -178.82 Module Inc.Scan Coordinates Axis Axis Module Inc.Scan Coordinates Axis Axis Channel 2 343.87 -186.83 -187.76 Channel 3 341.18 -349.26 178.91 -179.84 Module Coordinates Inc. Axis Scan AxiS Module Inc.Scan Module Inc.Scan Coordinates Axis AxiS Channel 4 341.18 -349.26 185.81 -186.74 Channel 5 Coordinates Axis AxiS Feature Analysis Comments.No reckrda 3, & 4 341.18 -349.26 182.36 -183.29 Channel 5 Summary Lble indications chs 1, 2, IK 11 11 2-C)OS E2A-52 a- IHI SOUTHWEST TECHNOLOGIES 43W AUTOMATED ULTRASONIC EXAMINATION RECORD ile/Plent:
Increment:                   II ism         IncrCnHcIt Ilcerval           90                                                                                                                             t.00 Mode:
Watls Bar Weld Identification:
D(:l                     3                               C:dcof svrlap Auloninatic Scan       Conveisbin Counts             1002                                                                                                                               le Scan MWiltin:                                                                                                Conversion Counls         I00                           NuMber ofrScaUs:
RPV-W02-03 PrfltevlCheIlCN:
tli-dircctiusal     Cortvcrsion Ihlits           Inches                                                                                                                             18 Correction:                                                                                                  Conversion Unils         Degrecs                         Head RowatePosition Ocriault                                                                                                                                                                      90.00 Modute rarameters:                                                                                               iusIn.               SSIY                           Hoist_(ivotPoint):
ISwT-PDI-AUTI/OI011&2 Exarmination No.: 25 roject No.: 04-0368 Weld Desertption:
a7H       Cml 13                                                                                                                                                     NIA Status            Angle Calibration Records: ERamination Notes:                                                                 08'OZ Directlon           Stan Offset     Step Offset                       WAT-13 Channeil Ii      ____n_
BH-to-Lwr Sh (2396-300 Devic CoxAt ration: WAT-WALCON-0001 tod.Ccnt:
(lhs for limitations due to th proximity of the core stop lugs and       V -~  0" I    94I Cltannct 2          On__ 55                                                                                                                  h       trumattation tubes.
07B Scan Path Drawi% SP-W02-03 Easm Date Exaninsation Time Surface Temperature OF tilt Acquisitioc Operator(s)/
M                                                    ( )          ._   I tO(in;         1.35tin)                       08M33tl2 tbanndl3           -Onl           Sllt 40-                         21m.tOi) _
SNT Level: Alan Schaefer N/A March2005ta End Start End.0I57. 0205 7 Seem Controller Parameters Inerenuest Asxi Planed Actual Seem Axis Planned Actual PositlonI Prnrametmr iontroiler PaR Lower Limit 33395 33395 Lower Unmit 23900 23900 Beam Direction:
(4)        _    4                *1 72(in)                         CS03303     __
CwlCcw can: flxrn Rcotatc Upper Limit 34925 34926 Upper Limit 30002 30002 Transducer Size: 100 icrement:
Chavnncl 4           of)           SlIlt_40'     tg                   Wh                                                                                                                               _
Ihoist Increment Interval 90 DC. 3 Code V ofOverlap:
Uk                                                                                      t 1.72(ini)                       C08.3D~4         Yxiitnitition Remarkes:
10 dode Autoniatic Scan Conversion Counts 100 Conversion Counts 100 Number ofScans: 18;can Motion: Bi-directional Conversion Units Inches Convcrsion Units Degrees Head Rotate Position:
Chantnacl   S       Oil&deg;                             ,                                 li)_t1.72Zin _                 O033D5_  _       Iimtited examinathon disc tathe pFULxxmtte                                               tj Channcl fi     _)f                               NIA     _                                                                                                                           of ttle corcbturei NJA_           NMA                               N/A       _     nti-roatlion lups.
90.00 2Orrcction l)erault 88.19 88.19 Hoist (Pivot Point): NIA dodale Parameters:
Chhnnel 7             tnlf           N.A         N:M                   NMA           N/A                               NA ChCannal             t               NMA         MA                   N/A             NA                               N5A                              __A t      I Increment &Scat Positions Actuat                                 Recordabl Ind:alion Scan No.($)                                                                                                                                         Analyst Remarks InuericntII losillun       __an l wilion                           Yes       No
07B Cal 13 Calibration Reeorda: lE ntminatlow Notes: Status Antal Direction Scan Offset Step Offset _ WAT- 13 Check or limitations due to the proximity of the core stop hug and tM shamnel I On 55 (+) M 1.40(in) 1.35(n) 0803301 low headinsrwnentationtubes
_11 Slr!_q                   9t                                                   NIA  Atlachttent:
> hnnel 2 On S5 (-) 1.40(in) 1.35(in) 0803302 harnel 3 On SIXC 40 (+) + 2.00(in) + 1.72(in) 0803303 (W 2hannel 4 On SLIC 40 (;) -2.00(in) + 1.72(n) 0803304 Examatrinon Remarks: Zhannel 5 Oi 0o. (N) + 0.(I1) + 1.72(in) 0803305 Ilimited examination due to the proximity of the core barrel-hannel 6 Off NIA N/A N/A NIA NIA anli-rotalion lugs, Shannel 7 Off NIA N/A N/A NtA N/A Channel 8 Off N1A N/A N/A N/A N/A______Increment
_ Ston       Channel I U           El           11n Yes 21 No 1 -13       3339S             34474                                                                                               _
& Sean Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A  
19472_ 2VWJ             Channeil2 U           [3]       01 further Evahiatbon 14 - 15       34565             34926w 1790tl                                                                                     _ __
24t)U2_ Channel 3 U3             13       &deg; RcqU!Fed:
                                                                                .hanncl 4 EJ C_                    91       O3     O Yes [a No                       .
(:hwulcl S (I           O       (D Archlive Tape/CD No.-
___                     _     Channel 6 El           CI1                   3A & U               _
___C C hannel 7 0]         n       [3 Analysks'IlpeCVlNo.:
_                     _(httnel S O             O                       NM Atnalyst / SPIT I[vel I Date: _A                                                                                                              _A 1531 FORUMN..UT M URlt- 5Y111 VAx                                                      q.j11Ircl;kt
 
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 24                                                         Page   I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis                             182.36 - 183.29 Inc. Axis                            342.87 - 350.97 Depth In Material                      4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                            343.87 -
Scan Axis                            177.89 - 178.82 Channel 2 Module Coordinates Inc. Axis                             343.87 -
Scan Axis                            186.83 - 187.76 Channel 3 Module Coordinates Inc. Axis                            341.18 - 349.26 Scan AxiS                            178.91 - 179.84 Channel 4 Module Coordinates Inc. Axis                           341.18 - 349.26 Scan AxiS                            185.81 - 186.74 Channel 5 Module Coordinates Inc. Axis                           341.18 - 349.26 Scan AxiS                            182.36 - 183.29 Channel 5 Feature Analysis                            Summary Comments No reckrdaLble indications chs 1, 2, 3, & 4 IK                                   11     11         2-C)OS E2A-52
 
a-                                                           IHI SOUTHWEST TECHNOLOGIES 43W                                               AUTOMATED ULTRASONIC EXAMINATION RECORD ile/Plent: Watls Bar                                         Weld Identification: RPV-W02-03                 PrfltevlCheIlCN:     ISwT-PDI-AUTI/OI011&2         Exarmination No.:           25 roject No.: 04-0368                                         Weld Desertption: BH-to-Lwr Sh (2396-300 Devic CoxAt ration: WAT-WALCON-0001 tod.Ccnt: 07B                                               Scan Path Drawi% SP-W02-03                           Easm Date             Exaninsation Time               Surface Temperature OF tilt Acquisitioc Operator(s)/ SNT Level: Alan Schaefer N/A                                                         March2005ta                         End             Start               End
                                                                                                                                      .0I57.               0205                                 7 Seem Controller Parameters               Inerenuest Asxi             Planed                 Actual   Seem Axis           Planned             Actual             PositlonI Prnrametmr iontroiler                   PaR               Lower Limit                 33395                 33395     Lower Unmit           23900             23900     Beam Direction:                 CwlCcw can:
icrement:
flxrn Rcotatc Ihoist Upper Limit Increment Interval 90 34925                 34926     Upper Limit DC.
30002 3
30002     Transducer Size:
Code V ofOverlap:
100 10           B-dode                 Autoniatic Scan           Conversion Counts             100                             Conversion Counts     100                           Number ofScans:                     18
    ;can Motion:         Bi-directional           Conversion Units             Inches                           Convcrsion Units       Degrees                       Head Rotate Position:           90.00 2Orrcction                 l)erault                                                                         88.19                 88.19                         Hoist (Pivot Point):               NIA dodale Parameters:                   07B         Cal 13                                                     Calibration Reeorda: lE ntminatlow Notes:
Status           Antal       Direction         Scan Offset     Step Offset         _         WAT- 13       Check or limitations due to the proximity of thecore stop hug and   '4    a ~0- ( M) a.
tM shamnel I             On               55           (+)
M                   1.40(in)         1.35(n)                     0803301         low headinsrwnentationtubes hnnel
      >       2         On               S5           (-)                 1.40(in)         1.35(in)                   0803302 harnel 3           On           SIXC 40         (+)               + 2.00(in)       + 1.72(in)                   0803303                                                                                           0 (W 2hannel 4           On           SLIC 40         (;)             - 2.00(in)       + 1.72(n)                     0803304         Examatrinon Remarks:
Zhannel 5           Oi               0o.           (N)               + 0.(I1)         + 1.72(in)                   0803305           Ilimited examination due to theproximity of the core barrel                     W~
    -hannel 6           Off             NIA           N/A                  N/A            NIA                          NIA            anli-rotalion lugs,                                                      0,  ;
Shannel 7            Off            NIA            N/A                  N/A            NtA                          N/A Channel 8            Off            N1A            N/A                   N/A           N/A                           N/A                                                                                 au
______Increment      & Sean Positions Actual                             Recordable Indications                                           Analyst Remarks Scan No.(s)       Increment Position                 Scan Position                   Yes     No     N/A  


==Attachment:==
==Attachment:==


Start Stop Start Stop Channld I 0 1 0 E Yes 2 No 1 -13 33395 34414 25277 28634 Channel 2 0 (a 03 Further Evaluation 14 -tB 34565 34926 23900 30002 Channel 3 0 CZ 0 Required:_ Clhnnet4 0 la 0 0 Yes 1 No__ _ ___ _ Channel 5 0 0 2 Archive Tape/CD No.: IChannel60 0 13 3 A/B I Channel 7 0 0 2 Analysis TapefCl) NqS.: I___ _I (Url aeljO 0 O 2 NIA Analyst / SN T Level I Date:1n -jA B -'4 a ~0- (0, ;a.au M)0 W~IST VORM I. UT 5S JaR.,5MU\I -\ -;<
Start           Stop         Start         Stop     Channld I 0         1       0       E Yes 2 No 1 -13       33395           34414         25277         28634     Channel 2 0         (a     03 Further Evaluation 14 -tB         34565           34926         23900         30002       Channel 3 0         CZ     0 Required:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief l-ISI-17 Attachments
_                                 Clhnnet4 0         la     0       0 Yes 1 No
.Exam Number 25 Page I of 2 Watts Bar unit 1 RPV-Wo2-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis 242.36 -243-29 342.87 -350.97 4.19 -5.35 Channel 1 343.88 -237.89 -238.82 Channel 2 343.88 -246.83 -247.76 Channel 3 341.17 -349.28 23B.91 -239.84 Channel 4 341.17 -349.28 245.81 -246.74 Channel 5 341.17 -349.28 242.36 -243.29 Channel 5 Summary No recordable indications chs 1, 2, 3, & 4.Feature Analysis Comments~-1XII It r.oo E2A-54 4ft Iffl SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SlteiPhnt:
__          _   ___       _                                               Channel 5 0         0       2 Archive Tape/CD No.:
Watts Bar lWeld Ident rojet No.: 04-0368 lWeld Descr M4*dConf 07B ISun Path I tin: PPV-WO2-03 1Fr*lRev/Cltg/ICN:
IChannel60           0       13           3 A/B I                                             Channel 7 0         0       2 Analysis TapefCl) NqS.:
lSwT-PDl-AUT1I/0101&2 Exammnatien No.: 26 sg: SP-W02-Q3 I E. Date IWAxerninaloo Time I Surface Temperature IF bate Acquisition Operator (s) I SNT Level: Alan Schaefer / N/A Sean Controller Parasmeter Increment Axis Pi Controller:
Analyst SN  / Level T I Date:1n I___     _I                                   (Url aeljO0        O       2 NIA jA IST VORM I. UT 5SJaR.,5MU
rR Lower Limit 3 Scan: Boiom Rotate Upper Limit 3 Increment:
                                                  \I -             \   -;<
[oisl Increment Interval 9 Mode: Autotnatic Scano Conversion Counts I Scan Motion: ji-directional Conversion Units 1 Correction:
 
Default I Start I End Start I End II March 2005 0211 ) 0220 7e 1 78'ttted Actual Scan Ais Planned i Acttal 3339 I 33395 ILower limit 30900 30900 I 34925 34926 UPPerlimit 36600 36600 10 00 nches D(: Conversion Counts Convcrsion Units Radius in.3 100 Degrees 38At9 Positional Pra meters Bcam Direetion:
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Cw1CcW Transducer Size. 1.00 Code% orOvcrlap:
Inservice Inspection Program Request for Relief l-ISI-17 Attachments                                 .
10 Nurnher of Scanc IS Head Rotate Position:
Exam Number 25                                                         Page   I of 2 Watts Bar unit 1 RPV-Wo2-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis                           242.36 - 243-29 Inc. Axis                           342.87 - 350.97 Depth In Material                     4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                           343.88 -
90.00 Hoist (Pivot Pointl NIA Module Parameters:
Scan Axis                           237.89 - 238.82 Channel 2 Module Coordinates Inc. Axis                           343.88 -
07R Ccl 13 Calibration Records: Esasmination Notes: Status Angle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the poxintity of coe stop jugS and Cihannel I On 55 (4) + 1.40(in) 1.35(in) 0803301 lower head instrtumentation tubes.Channel 2 On 55 (-- 140(in) 1.35(in) 0803302 Clannel 3 On SlI1C 4(l (V) + 2.00(in) 1.72(in) 003303 Channel 4 On SLIC 40 (-) -2.110(in)
Scan Axis                           246.83 - 247.76 Channel 3 Module Coordinates Inc. Axis                           341.17 - 349.28 Scan Axis                           23B.91 - 239.84 Channel 4 Module Coordinates Inc. Axis                           341.17  -  349.28 Scan Axis                           245.81  -  246.74 Channel 5 Module Coordinates Inc. Axis                           341.17 - 349.28 Scan Axis                           242.36 - 243.29 Channel 5 Feature Analysis                            Summary Comments No recordable indications chs 1, 2, 3, & 4.
+ 1.72(inl 0803304 Esaminatian Remarks: W(hamicl 5 On oil (4) 4 U.00(ill)
                        ~-1                 Ql-kl-XII  It    r.oo E2A-54
+ 1.72(in) 0803305 Limited examination due to the proximity of the core barrel Channel 6 Off N/A N/A NIA NiA N/A anti-rotation lugi Channel7 Off NWA N/A NIA N/A N/A ChannelS8 Off N/A N/A NMA N/A N/A Increme-t  
 
& Scae Positions Actual Recordabh Indientions Analyst Remarka Increment Posidon Scan Position Yes No N/A Attaciment:
4ft SlteiPhnt: Watts Bar Iffl SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD lWeld Ident          tin: PPV-WO2-03              1Fr*lRev/Cltg/ICN:        lSwT-PDl-AUT1I/0101&2          Exammnatien No.:              26 rojet No.: 04-0368                                    lWeld Descr M4*dConf    07B                                        ISun Path I          sg: SP-W02-Q3                I      E. Date      IWAxerninaloo Time            I        Surface Temperature IF bate Acquisition Operator (s)I SNT Level: Alan Schaefer / N/A                                                                      I    Start      I    End              Start          I      End II March 2005 0211)          0220              7e            1        78 Sean Controller Parasmeter          Increment Axis              Pi 'ttted                Actual      Scan Ais              Planned      i      Acttal              Positional Prameters
ScanNos) Start Stop Start Stop Channel I O 0 03 Yes 2 No 1 13 33395 34474 31266 34632 Channel 2 0 i2 0 Further Evaluation 14 -18 34565 34926 30900 36600 Channel 3 0 la 0 Required: Channel4 0 E3 0 OYes E2 No Channel 5 0 0 2 Archive TapeCl) No.:__ChanneI6 0 0 E 3 M3_Channel 7 0 0 E Analysis Tape/CD No.: A _ Charmcl 0 O NIA Analyst I SNT Level / Date \t kJI FO7M .cr p, (Yx1-5 0 h.4~aa 0~ FF, Os -W 1 (5 c0~;. o " 0, Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 26 Watts Bar Unit 1 RPV-W02-03 DH to LWR Shell Page I of 2 Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 312.36 -313.29 341.97 -350.07 4.19 -5.35 Channel 1 342.98 -307.89 -308.82 Module Inc.Scan Coordinates Axis Axis Module Inc.Scan Module Inc.Scan Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates AXiS AxiS Coordinates Axis Axis Coordinates Axis Axis Channel 2 342.98 -316.83 -317.76 Channel 3 340.28 -348.38 308.91 -309.84 Channel 4 340.28 -348.38 315.81 -316.74 Channel 5 340.28 -348.38 312.36 -313.29 Feature Analysis Comments Channel 5 Summary No recordable indications chs 1, 2, 3, & 4.'I Tor it rc k, ;E2A-56 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD MitePlant:
                                                                                                                                                                                                                          -5 Controller:               rR              Lower Limit                  33339            I    33395      ILower limit              30900            30900      Bcam I     Direetion:                 Cw1CcW Scan:               Boiom Rotate          Upper Limit                  334925                  34926        UPPerlimit              36600            36600      Transducer Size.                      1.00 Increment:               [oisl            Increment Interval            910                                  D(:                     3                            Code% orOvcrlap:                       10 Mode:               Autotnatic Scano       Conversion Counts             I 00                                Conversion Counts        100                          Nurnher of Scanc                        IS        0 h.4~
Watts Bar Weld tdentilesitionl RPV-W02-03 Pro/Rev/Cizg/ICN:
Scan Motion:         ji-directional       Conversion Units             1nches                              Convcrsion Units        Degrees                      Head Rotate Position:              90.00 Correction:             Default                                                                             Radius in.              38At9                        Hoist (Pivot Pointl                    NIA Module Parameters:                07R        Ccl 13                                                          Calibration Records:    Esasmination Notes:                                                      aa Status          Angle      Direction          Scan Offset        Step Offset                      WAT-13            Check for limitations due to the poxintity of        coe stop jugS and Cihannel I         On              55          (4)                + 1.40(in)          1.35(in)                      0803301          lower head instrtumentation tubes.                                         0~ FF, Channel 2          On              55          (--                  140(in)          1.35(in)                      0803302                                                                                  Os  -W      1 0,
ISwT-PDI-AUT/O/O/G&l2"roject Na.: 04-0368 Weld Des crito: BH4o-Lwr Sh (299-366' Device Confiarstion:
Clannel 3        On          SlI1C 4(l      (V)                + 2.00(in)          1.72(in)                      003303 Channel 4 W(hamicl 5 On On SLIC 40 oil
WAT-WALCON-OOOI Examination No.: Ua Viod.CoEf.:
(-)
07B Sean Path Drawiat: SP-W02-03 Exam Date Examitatioa Time Surface Ten perature IF)ata Acquisition Operatr (s)ISNTLevcl:
(4)
Ala SchaeferIN/A
                                                                  - 2.110(in) 4 U.00(ill)
* I March 2005 Start End Start Ed 0236 0238 ..71. 78.Scan ContIroller Parameters Incremest Axis Plnined Actual Seat Axis Planned Actoal Positional Parameters
                                                                                    + 1.72(inl
:introler:
                                                                                    + 1.72(in) 0803304 0803305 Esaminatian Remarks:
PaR Lower Umit 33395 33395 Lowa Limit 29900 29900 Beam Direction:
Limited examination due to the proximity of the core barrel
Cw/Ccw Scan: otom Rotatc t lrper Umit 34925 34926 Uppalimit 36600 36602 Transducer Size: 1.00 bLmoeileOt:
                                                                                                                                                                                                                ~;. o ("5c0 Channel 6        Off            N/A          N/A                    NIA              NiA                              N/A            anti-rotation lugi Channel7          Off            NWA          N/A                    NIA              N/A                              N/A ChannelS8        Off            N/A          N/A                    NMA              N/A                              N/A Increme-t & ScaePositions Actual                                  Recordabh Indientions                                                Analyst Remarka Increment Posidon                Scan Position                      Yes      No      N/A Attaciment:
Ihist Increment Interval 90 DC1 3 code % or Ovelap: to Mode: Altomatic Stat Conversiio Counts o) n ts 100 Nmer ofScans: t5 Scan Motion: BI-directional Conversion Inits Indl)t Convkrsion Units Degrees Hlead Rotate Position:
ScanNos)        Start          Stop        Start          Stop      Channel I    O                0          03Yes 2      No 1 13      33395            34474        31266          34632      Channel 2    0      i2      0    Further Evaluation 14 - 18    34565            34926        30900          36600      Channel 3    0      la      0    Required:
90.00 Correction:
Channel4      0      E3      0        OYes E2 No Channel 5    0        0        2    Archive TapeCl) No.:
Default IRadius hi. 88.19 Hoist (Pivot Point): NIA Module Parameters:
__ChanneI6    0        0      E              3 M3
07R Cal 13 Calibralion Records: Exansinatten Notes: Status Anile Direction Scan Offset Step Offset WAT-I 3 Check for limitations due to the proximity of the core slop lugs anid Channel I On 55 + 4- 1.40(in) -1.35(in) 0803301 lower head instrumentation tubes.Channel 2 On 55 -1.40(in) -1.35(i) 0803302 Channel 3 On SI.1( 40 t) 4 2.00(in) + 1.72(i) 08311303 C haueul 4 On SLIC40 t --2.00(in) + 1.72(W) 0803304 Examination Remarks: Channel 5 On 01. t4 + +1Ot.(in) 1- 1 72(in) 0803305 Limited cxtuninatiao duo lom te poxisiity of the core barrel Channel 6 Orr N/A N/A N/A NMA NIA awitl-rotahion lugs.ILiannel 7 orr N/A N/A N/A N/A NIA ChannelS a ITt N/A N/A N/A N/A NIA Increment Scan Positions Acual Recordable Indicatioas Analyst Remarks lncrement Position Scan Position Yes No N/A Attlachment:
_Channel    7  0        0      E    Analysis Tape/CD No.:
.5 Start Stop Start Stop Cthannel I O l 0 O Yes 2 No 1-5 34566 34927 29900 36600 (Ihannel 2 0 2 0 Further Evaluation Chsiriel 3 0 l 0 Required:_ Channel4 0 la 0 0 Yes E No (IChartnnel 5 0 0 (a Archive Tape/CD No.: I Channel6 3 O 3 0 3 A/B_Charriel 7 0 0 1 Analysis laIe*/I) No.:-_ A _ _Chanmel SO 0 O NIA Analyst I SNT Level I Date'.: \ l wn n ISWr FORKMa urTso (R...9sas 00 C 12 0.0 en minu Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Txam Numiber 26a Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to tWR Shell Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material 302.36 -303.29 335.67 -339.27 4.19 -5.35 Channel 1 348.34 -297.89 -298.82 Module Inc.Scan Coordinates Axis Axis Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis AxiS Channel 2 348.34 -306.83 -307.76 Channel 3 345.66 -349.27 298.91 -299.84 Module Coordinates Inc. Axis Scan Axis Channel 4 345.66 -349.27 305.81 -306.74 Channel 5 345.66 -349.27 302.36 -303.29 Module Inc.Scan Coordinates Axis Axis Feature Analysis Comments Channel 5 Summary No recordable indications chs 1, 2, 3, & 4.K_-I~~~~iT_~
A                         _        Charmcl                0    O                NIA Analyst I SNT Level / Date            \t FO7Mp,
i A -kz)Q.E2A-58 ENCLOSURE 3 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 Summary: Due to design configuration of the reactor vessel, volumetric examination of the meridional welds during the WBN Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved.
                  .                      kJI                                                                                                            cr            (Yx1
The design configuration of the core barrel stabilizing lugs and location of the lower head penetrations interfere with performance of an ultrasonic scan of the meridional welds, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of this component is required in accordance with ASME Section XI Table IWB-2500-1, Examination Category B-A, Item Number B1.22. The full volume weld examination requirement is illustrated by ASME Section XI Figure IWB-2500-3.
 
An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the meridional welds. The design configuration limits the best effort ultrasonic examination to approximately 67 percent to 85 percent of the required volume of each of the meridional welds. The volumetric examinations resulted in no recordable indications for Welds W2A, W2B, W2C, W2D, W2E, and W2F. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety.In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requirement due to physical restrictions.
Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Relief is requested from these examinations because the code requirement is impractical to implement.
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 26                                                        Page    I of    2 Watts Bar Unit 1 RPV-W02-03 DH to LWR Shell Cursor Box 1 of 1 Scan Axis                            312.36 - 313.29 Inc. Axis                            341.97 - 350.07 Depth In Material                      4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                          342.98 -
Scan Axis                          307.89 - 308.82 Channel 2 Module Coordinates Inc. Axis                          342.98 -
Scan Axis                          316.83 - 317.76 Channel 3 Module Coordinates Inc. AXiS                            340.28 - 348.38 Scan AxiS                            308.91 - 309.84 Channel 4 Module Coordinates Inc. Axis                           340.28 - 348.38 Scan Axis                            315.81 - 316.74 Channel 5 Module Coordinates Inc. Axis                            340.28 - 348.38 Scan Axis                           312.36 - 313.29 Channel 5 Feature Analysis                            Summary Comments No recordable indications chs 1, 2, 3, & 4.
                                  'I Tor      it  rck,;
E2A-56
 
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD MitePlant: Watts Bar                                        Weld tdentilesitionl RPV-W02-03                      Pro/Rev/Cizg/ICN:      ISwT-PDI-AUT/O/O/G&l2 "roject Na.: 04-0368                                        Weld Des crito:           BH4o-Lwr Sh (299-366' Device Confiarstion: WAT-WALCON-OOOI                        Examination No.:           Ua Viod.CoEf.: 07B                                             Sean Path Drawiat: SP-W02-03                               Exam Date             Examitatioa Time                 Surface Ten perature IF
)ata Acquisition Operatr (s)ISNTLevcl: Ala SchaeferIN/A
* I March 2005         Start             End           Start               Ed 0236           0238 .         .71.                 78.
Scan ContIroller Parameters           Incremest Axis                 Plnined                     Actual   Seat Axis             Planned               Actoal             Positional Parameters
:introler:                 PaR               Lower Umit                     33395                     33395       Lowa Limit               29900               29900   Beam Direction:                 Cw/Ccw Scan:                   otomRotatc          tlrper Umit                   34925                     34926       Uppalimit               36600               36602   Transducer Size:                     1.00 bLmoeileOt:               Ihist             Increment Interval             90                                   DC1                     3                           code % or Ovelap:                     to Mode:               Altomatic Stat           Conversiio Counts               o)                                             n     ts     100                         Nmer ofScans:                         t5 Scan Motion:         BI-directional         Conversion Inits               Indl)t                               Convkrsion Units         Degrees                       Hlead Rotate Position:           90.00 Correction:               Default         IRadius                                                                         hi.             88.19                       Hoist (Pivot Point):                 NIA 00 Module Parameters:                 07R           Cal 13                                                           Calibralion Records:   Exansinatten Notes:
Status         Anile         Direction         Scan Offset         Step Offset                       WAT-I 3         Check for limitations due to the proximity of the core slop lugs anid 0.
Channel I           On             55             +               4- 1.40(in)         - 1.35(in)                       0803301         lower head instrumentation tubes.
Channel 2         On               55                               - 1.40(in)           - 1.35(i)                       0803302                                                                                       0 en Channel 3           On           SI.1( 40         t)               4 2.00(in)           + 1.72(i)                       08311303 C haueul 4         On           SLIC40           t -               - 2.00(in)           + 1.72(W)                       0803304         Examination Remarks:
Channel 5           On             01.           t4               +1Ot.(in)           +1-1 72(in)                     0803305           Limited cxtuninatiao duo lom tepoxisiity of the core barrel           C 12 Channel 6           Orr           N/A             N/A                   N/A               NMA                               NIA           awitl-rotahion lugs.
ILiannel 7         orr           N/A             N/A                   N/A               N/A                               NIA ChannelSa            ITt         N/A             N/A                   N/A                 N/A                             NIA Increment         Scan Positions Acual                               Recordable Indicatioas                                                 Analyst Remarks lncrement Position                   Scan Position                       Yes     No       N/A Attlachment:
          .5       Start           Stop           Start         Stop       Cthannel I O           l       O 0           Yes 2 No 1-5       34566           34927           29900         36600       (Ihannel 2 0             2       0 Further Evaluation Chsiriel 3 0           l       0 Required:
Channel4 0
_                      la       0         0 Yes E No (IChartnnel 5 0         0       (a Archive Tape/CD No.:
I Channel6 O       3      3 0                   3 A/B
_Charriel 7     0       0       1   Analysis laIe*/I) No.:
            -_                         A             _     _Chanmel                     SO           0     O               NIA Analyst I SNT Level I Date'.:         \       l       wn         n ISWr FORKMaurTso (R...9sas
 
minu Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Txam Numiber 26a                                                         Page   1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to tWR Shell Cursor Box 1 of 1 Scan Axis                           302.36 - 303.29 Inc. Axis                          335.67 - 339.27 Depth In Material                      4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis                          348.34 -
Scan Axis                          297.89 - 298.82 Channel 2 Module Coordinates Inc. Axis                           348.34 -
Scan Axis                            306.83 - 307.76 Channel 3 Module Coordinates Inc. Axis                            345.66 - 349.27 Scan AxiS                            298.91 - 299.84 Channel 4 Module Coordinates Inc. Axis                           345.66 - 349.27 Scan Axis                          305.81   - 306.74 Channel 5 Module Coordinates Inc. Axis                          345.66 - 349.27 Scan Axis                          302.36 - 303.29 Channel 5 Feature Analysis                             Summary Comments No recordable indications chs 1,       2, 3,   & 4.
iA    -kz)Q.
K_
                                                                  -I~~~~iT_~
E2A-58
 
ENCLOSURE 3 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 Summary:
Due to design configuration of the reactor vessel, volumetric examination of the meridional welds during the WBN Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved. The design configuration of the core barrel stabilizing lugs and location of the lower head penetrations interfere with performance of an ultrasonic scan of the meridional welds, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of this component is required in accordance with ASME Section XI Table IWB-2500-1, Examination Category B-A, Item Number B1.22. The full volume weld examination requirement is illustrated by ASME Section XI Figure IWB-2500-3.
An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the meridional welds. The design configuration limits the best effort ultrasonic examination to approximately 67 percent to 85 percent of the required volume of each of the meridional welds. The volumetric examinations resulted in no recordable indications for Welds W2A, W2B, W2C, W2D, W2E, and W2F. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety.
In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requirement due to physical restrictions. Relief is requested from these examinations because the code requirement is impractical to implement.
System/Component(s) for Which Relief is Requested:
System/Component(s) for Which Relief is Requested:
* Code Class 1 Reactor Pressure Vessel Meridional Welds.* Weld Identifiers:
* Code Class 1 Reactor Pressure Vessel Meridional Welds.
W2A, W2B, W2C, W2D, W2E, and W2F.Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.
* Weld Identifiers: W2A, W2B, W2C, W2D, W2E, and W2F.
Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.
Code Requirement:
Code Requirement:
WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-A, Item Numbers B1.22, Reactor Vessel Meridional Welds.E3-1 ENCLOSURE 3 TENNESSEE IIALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 Code Requirements from Which Relief is Requested:
WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-A, Item Numbers B1.22, Reactor Vessel Meridional Welds.
Relief is requested from the volumetric examination coverage of essentially 100 percent of the reactor vessel meridional welds.Basis for Relief: The design configuration of the reactor pressure vessel precludes a complete volumetric examination of the required volume for the Meridional Welds W2A, W2B, W2C, W2D, W2E, and W2F. The limitation is due to the bottom head penetrations and core barrel stabilizing lugs. The configuration limits the volumetric examination of the required volume as follows for each weld: W2A -79 percent; W2B -84 percent; W2C -85 percent; W2D -85 percent; W2E -69 percent; and , W2F -67 percent. Refer to Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.
E3-1
 
ENCLOSURE 3 TENNESSEE IIALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 Code Requirements from Which Relief is Requested:
Relief is requested from the volumetric examination coverage of essentially 100 percent of the reactor vessel meridional welds.
Basis for Relief:
The design configuration of the reactor pressure vessel precludes a complete volumetric examination of the required volume for the Meridional Welds W2A, W2B, W2C, W2D, W2E, and W2F. The limitation is due to the bottom head penetrations and core barrel stabilizing lugs. The configuration limits the volumetric examination of the required volume as follows for each weld: W2A - 79 percent; W2B - 84 percent; W2C   - 85 percent; W2D - 85 percent; W2E - 69 percent; and , W2F -   67 percent. Refer to Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.
Alternative Examinations:
Alternative Examinations:
In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations associated with the meridional welds.Refer to Enclosure 3 Attachments, for the examination data reports.Justification for the Granting of Relief: The design configuration of the reactor vessel core barrel stabilizing lugs and bottom head penetrations precludes ultrasonic examination of essentially 100 percent of the meridional welds. The meridional weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT data recording/analysis systems. The target scope of the examinations included 100 percent of the accessible weld.The examination coverage requirements for the meridional welds are discussed in Enclosure 5, Examination Area Coverage Report for WBN. Examination of the meridional welds is obstructed by the core barrel stabilizing lugs and lower head penetrations.
In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations associated with the meridional welds.
The design configuration allows for ultrasonic examination of approximately 67 percent t:o 85 percent of the required volume.E3 -2 ENCLOSURE 3 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume E-F-G-H is depicted on ASNE Section XI Figure IWB-2500-3.
Refer to Enclosure 3 Attachments, for the examination data reports.
The core barrel stabilizing lugs and bottom head penetrations limit two-direction parallel and transverse coverage of the meridional welds. These components restrict the ultrasonic search unit scan surface.Other examination techniques were also determined to be impractical for this configuration.
Justification for the Granting of Relief:
Due to the design configuration of the lower head penetrations, ultrasonic examination from the outside surface of the vessel provides less coverage than ultrasonic examination from the inside surface and the outside surface has limited access. Use of AUT equipment from the inside surface reduces personnel radiation exposure.The meridional welds received limited two-direction parallel and transverse coverage with the sound beam directed toward the weld. The results of these examinations recorded no reportable indications in Welds W2A, W2B, W2C, W2D, W2E, and W2F. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the meridional welds.Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10CFR 50.55a(g)(5)(iii).
The design configuration of the reactor vessel core barrel stabilizing lugs and bottom head penetrations precludes ultrasonic examination of essentially 100 percent of the meridional welds. The meridional weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT data recording/analysis systems. The target scope of the examinations included 100 percent of the accessible weld.
Implementation Schedule: This request for relief is applicable to WBN's first inspection interval that began May 27, 1996 and ends December 26, 2006.E3-3 ENCLOSURE 3 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INTERVAL INSERVICE INSPECTION INTERVAL REQUEST FOR RELIEF 1-ISI-18 ATTACHMENTS
The examination coverage requirements for the meridional welds are discussed in Enclosure 5, Examination Area Coverage Report for WBN. Examination of the meridional welds is obstructed by the core barrel stabilizing lugs and lower head penetrations.
: 1. Examinations Data Reports for Weld W2A Pg E3A-2 2. Examinations Data Reports for Weld W2B Pg E3A-7 3. Examinations Data Reports for Weld W2C Pg E3A-12 4. Examinations Data Reports for Weld W2D Pg E3A-17 5. Examinations Data Reports for Weld W2E Pg E3A-22 6 Examinations Data Reports for Weld W2F Pg E3A-27 E3A-1 ISwT Examination Summary Record Pmjd No: Sr: So,.y shir No., 368 Watts Bar Nuclear Plant Unit 1. 300O33 Examination Area: Reactor Pressure Vessel Une/Asseubly.
The design configuration allows for ultrasonic examination of approximately 67 percent t:o 85 percent of the required volume.
Lower Head Medidional Weld W2A o Idendtication:
E3 -2
Lower Head at 0-degres T N HCD NDE PEoedu Eam, R E R"Cdmu Cff Mthod ReoJCh.Rcfl r _a h AG Ro R.-do AUT IS.T-POI-AUTIMo 5C AuMo .-AUTO forl thktn ome-u-.ne t .ICNZ 6 AUTSLIC40 X -VM Eteene lTte due bto Om cre barrel 3UpPel tkg d 0 w C A.UT5C X .VU w ler eebd pe o bet; ct, S AUI SLK4OT X .VM CD i 5 AUTJT5T X VIA CD CD6 0 0-'.4 PaeopWd Sr. 7 9 Da: Veg: Summnty No: t-@ 1q S 2-Mat-05 1 OF 1 300033 f ' IC.
 
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMNATION RECORD Site/Plint:
ENCLOSURE 3 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
Watts Bar eiddezttflrtion:
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume E-F-G-H is depicted on ASNE Section XI Figure IWB-2500-3. The core barrel stabilizing lugs and bottom head penetrations limit two-direction parallel and transverse coverage of the meridional welds. These components restrict the ultrasonic search unit scan surface.
RPV-W02.A PreRlterICheCN:
Other examination techniques were also determined to be impractical for this configuration. Due to the design configuration of the lower head penetrations, ultrasonic examination from the outside surface of the vessel provides less coverage than ultrasonic examination from the inside surface and the outside surface has limited access. Use of AUT equipment from the inside surface reduces personnel radiation exposure.
ISwT-PDI-AIITA/0i&2 Examination Mo.: 5 Project No.: 04-0368 DWDescription:
The meridional welds received limited two-direction parallel and transverse coverage with the sound beam directed toward the weld. The results of these examinations recorded no reportable indications in Welds W2A, W2B, W2C, W2D, W2E, and W2F. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the meridional welds.
Lwrld Meridilonal40' DerkenConfiouration:
Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10CFR 50.55a(g)(5)(iii).
WAT-WALCON-001
Implementation Schedule:
_ _____N__MeCori Ien 07A Frei attl Drawing: SPMcriri EnmeDate Erain *iop Tim SwAte Temper10reIF Daoe uAtorati/San d Coraiofs C rrontsi10 10CNeicho2005 Sttr1 End Sart L od S en Contr llercPia reters inmrientts Planned A onversic n nits gresi A tt Position:0.0me 0 Modu34lear Pc lrm3439 LowlcLimita e 1rd 14S0 BeamlDib eiioni DNtUp Scan, I..m pivot UpccL.. _ 3622 _ _a_ 3657 U ALimit e -a3662 3661 d TransdueroSiz he. e ea Increment Berm Rotate lnrvanentriervtl 54._ DC] 3 _ 04 _ C nde' Overlayp 10 Mode. Autonctio Sen CuvronCenstb 100 ConerirmCounnb 100 Number of Sar. 20 Scan Motion: BI-direcin Cion on tbfit5 Degrees Converslon units Degrces Rea~d Roat Posidon: 0 o Corrertion:
This request for relief is applicable to WBN's first inspection interval that began May 27, 1996 and ends December 26, 2006.
Default Rsius 8819 Rtadiusn _r 88.19 1101st(PivotPodnt) 324.05 Moduk Pargmi terr 07A Col 13 Calibr atonRecordis
E3-3
[E-minti..  
 
~Notos: A..6"- ni*s~ V-01T nft s W.. OfF.S I WAT 13 C~heck lr rlimitatlons due to the Proximity ofthe lower head Channell OD 55 --140(in) 1.35(in) 0801301 inairumeninton tubea Chatned2 On 55 (4-_ + 1.40(in) -1.35(in) 0801302 Ctramci3 On SLIC40 (-) -2.00in) t 1.72(in) 0S01303 Channel 4 On SLIC40 + 2.00(in) + 1.72(in) 0801304 Examination Reanrks: Channel S On OL (4.) + 0.00(rn) -1.72(in) 0801305 Lnited examination due to thu olrximity of the corc barrel Channel 6 Off NWA N/A NMA N/A NtA ant-rotation tugs and the lower head Instrnmentation tubes Channel7 Off N/A N/A NMA NIA N/A Channel S Off N/A N/A N/A N/A N/A;Ago= ; ' E;i IFj Increment  
ENCLOSURE 3 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
& Seas ositiion Actual Recerdabl Indications Analyst Remark Scan No.(s) Incremnt Position Stan Position Yes No NtA Attathmetnt_
FIRST 10-YEAR INTERVAL INSERVICE INSPECTION INTERVAL REQUEST FOR RELIEF 1-ISI-18 ATTACHMENTS
Stant Sbp Start Stop Chanadcli p El Dl Yes 3 No 1-20 35492 36330 1478 3662 Chsanel2 0 Ud 0 FurtherEvaluation Channel 3 0 1 0 Rrrnired: Chanael4 0 0 QYas [21No_Chnnel 50 a i Auitve Tzpe/CD No-Chnnnei6 n 0 R I lA&B_ _ ._A csal 7 0 O Arnalysis Tape/CD No//1 Ciannela El NtA AnslysttSNTI1eveI/Dste: ( 4/ r t/ _rMToaiKu er,. (t.e'AsZ)(3-CD~~ O Co 0 Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Lispection Program Request for Relief 1-ISI-18 Attachments Exam Number S Page I of 2 Watts Bar Unit 1 RPV-W02-A LWR Ed Meridional a 0 Deg Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 15.64 -16.57 359.48 -4.34 2.29 -2.94 Channel 1 0.40 -339.62 18.56 -19.49 Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis Channel 2 Summary No Recordable Indications channels 1, 2, 3, 4, and 5 Channel 2 0.40 -339.62 12.71 -13.64 Module Coordinates Inc. Axis Scan Axis Channel 3 358.25 -3.09 18.14 -19.07 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 358.25 -3.09 13.13 -14.06 Channel S 358.25 -3.09 15.65 -16.58 I : : I wJr/0 k44 M ao E3A4 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plhat:
: 1. Examinations Data Reports for Weld W2A           Pg E3A-2
Watts Bar W Meartllostleu RPV-W02-A Pi?/Rn eACN: ISwT-PDI-AUTI/0/0/1&2 Eseub n C.: PreecttN:
: 2. Examinations Data Reports for Weld W2B           Pg E3A-7
04.0361 Wlt
: 3. Examinations Data Reports for Weld W2C           Pg E3A-12
: 4. Examinations Data Reports for Weld W2D           Pg E3A-17
: 5. Examinations Data Reports for Weld W2E           Pg E3A-22 6 Examinations Data Reports for Weld W2F           Pg E3A-27 E3A-1
 
ISwT Examination Summary Record Pmjd No:                                             Sr:                                                                   So,.y   shir No.,
368                                                 Watts Bar Nuclear Plant Unit 1.                                       300O33 Examination Area:   Reactor Pressure Vessel Une/Asseubly.       Lower Head Medidional Weld W2A                     o Idendtication:       Lower Head at 0-degres                             T N   HCD NDE             PEoedu             Eam,               R     E           R"Cdmu Cff Mthod           ReoJCh.Rcfl         r     _a           h         AG     Ro                         R.-do AUT         IS.T-POI-AUTIMo         5C         AuMo     .   -                       AUTOforlthktn    ome-u-.net    .
ICNZ               6       AUTSLIC40 X   -     VM                 Eteene lTte due btoOm cre barrel 3UpPel     tkgw d       0 C         A.UT5C X   . VU                   lerw eebd peo    bet;                               ct, S     AUI SLK4OT X   . iVM                                                                  CD 5       AUTJT5T X           VIA                                                                     CD CD6 0 0
                                                                                                                                                                '.4 f                          '        IC.
PaeopWd Sr. 7               9                               Da:                             Veg:                     Summnty No:                   t
              -   @                 S                           1q2-Mat-05                     1 OF1                      300033
 
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMNATION RECORD Site/Plint: Watts Bar                                     eiddezttflrtion: RPV-W02.A                     PreRlterICheCN:         ISwT-PDI-AIITA/0i&2           Examination Mo.:             5 Project No.: 04-0368                                           DWDescription:   Lwrld Meridilonal40' DerkenConfiouration: WAT-WALCON-001                       _    _____N__
MeCori        07A                        Ien                   attl Drawing: SPMcriri Frei                                              EnmeDate             Erain *iop Tim                   SwAte Temper10reIF Daoe                   uAtorati/San       d CoraiofsC          rrontsi10                                     10CNeicho2005         Sttr1         End               Sart                 Lod Sen Contr llercPia   reters         inmrientts                 Planned                   A           onversic n     nits         gresi         A           tt     Position:0.0me               0 Modu34lear                 Pc             lrm3439                                                       LowlcLimita eiioni e         1rd           14S0         BeamlDib                       DNtUp Scan,               I..m     pivot       UpccL..               _     3622       _       _a_   3657     U       ALimit       -    e a36623661 d TransdueroSiz                 he. e       ea           (3 Increment             Berm Rotate       lnrvanentriervtl               54._                             DC]                     3               _       _ C04 nde' Overlayp                     10 -CD Mode.               Autonctio Sen         CuvronCenstb                 100                               ConerirmCounnb           100                         Number of Sar.                     20 Scan Motion:           BI-direcin         Cion on tbfit5                 Degrees                           Converslon units         Degrces                     Rea~dRoat Posidon:               0o Corrertion:               Default         Rsius                       8819                             Rtadiusn       _r       88.19                       1101st(PivotPodnt)             324.05 ~~      O Moduk Pargmi     terr             07A       Col 13                                                         Calibr atonRecordis [E-minti.. ~Notos:
A..6"-   ni*s~             V-01T nft         sW.. OfF.S             I       WAT 13           C~heck lr rlimitatlons due to the Proximity ofthe lower head Channell           OD             55           -             - 140(in)               1.35(in)                   0801301         inairumeninton tubea Chatned2           On             55         (4-_             + 1.40(in)         - 1.35(in)                     0801302 Ctramci3           On           SLIC40       (-)             - 2.00in)           t 1.72(in)                   0S01303 Channel 4         On           SLIC40                         + 2.00(in)           + 1.72(in)                     0801304         Examination Reanrks:
Channel S         On             OL         (4.)             + 0.00(rn)           - 1.72(in)                   0801305         Lnited examination due to thu olrximity ofthe corcbarrel Channel 6         Off           NWA       N/A                     NMA               N/A                           NtA           ant-rotation tugs and the lower head Instrnmentation tubes Channel7           Off           N/A         N/A                   NMA               NIA                           N/A Channel S         Off           N/A         N/A                   N/A               N/A                           N/A
                                                  ;Ago=                           ;         '                                                           E;i IFj                                           Co 0
Increment & Seas ositiion Actual                             Recerdabl Indications                                             Analyst Remark Scan No.(s)     Incremnt Position             Stan Position                       Yes     No   NtA   Attathmetnt_
Stant           Sbp         Start         Stop       Chanadcli             p El           Dl Yes 3 No 1-20       35492           36330         1478         3662         Chsanel2 0             Ud   0   FurtherEvaluation Channel 3 0           1     0   Rrrnired:
Chanael4 0                   0         QYas [21No
_Chnnel 50             a     i   Auitve Tzpe/CD No
                        -                                               Chnnnei6 n             0     R   I         lA&B
_ _              ._A                     csal     7                   0O  Arnalysis Tape/CD No
                                                      //1                 Ciannela El                                 NtA AnslysttSNTI1eveI/Dste:           (               4/   _                                r t/
rMToaiKu er,. (t.e'AsZ)
 
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Lispection Program Request for Relief 1-ISI-18 Attachments Page   I of 2 Exam Number S Watts Bar Unit 1 RPV-W02-A LWR Ed Meridional a 0 Deg Cursor Box 1 of 1 Scan Axis                         15.64 - 16.57 Inc. Axis                       359.48 - 4.34 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                          0.40 - 339.62 Scan Axis                        18.56 - 19.49 Channel 2 Feature Analysis                       Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5 Channel 2 Module Coordinates Inc. Axis                          0.40 - 339.62 Scan Axis                        12.71 - 13.64 Channel 3 Module Coordinates Inc. Axis                       358.25 - 3.09 Scan Axis                        18.14 - 19.07 Channel 4 Module Coordinates Inc. Axis                       358.25 - 3.09     I :      :
Scan Axis                        13.13 - 14.06           I Channel S Module Coordinates Inc. Axis                        358.25 - 3.09 Scan Axis                        15.65 - 16.58
                                                  /0 M k44   ao wJr E3A4
 
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plhat: Watts Bar                                 W Meartllostleu RPV-W02-A                             Pi?/Rn eACN:             ISwT-PDI-AUTI/0/0/1&2 Eseub n                                 C.:
PreecttN: 04.0361                                     Wlt


== Description:==
== Description:==
LwMrHdMeridionalil 0 Device Colra : WAT-WALCON-0001 Mod.Csut: 07B                                          sm Patl Drawla SPMerid                                      E      Dthxasiale                        Tie.              Surfaee Tempera        F Dubs Acquisition Operator (#)I SNY Levekl ). Rle~mauaiI                                                                                    St 181e 'l8l End 1i30 I        Start 78 Find 71                    t n
0.
Sean Controller Parameters          lacreeeat Axis            Pluaned                      Actual                    Se        Planned              Actual                Positional Parameters 0 :
Controller:                PaR          LoweriLnit                  1160                      1540        LoweLiml                  34986              34936      Beam Direction:                Cw/CcW            (A Scam                  Boom Rotate      UppDLimut                  3698                        3699        Una lUmit                37014              37014        Tranduer Si=                      1.00          0in b.Meat              Boom Pivot      lnmemase interval          54                                      DCI                      3                                Code % of Overlap:                  10 Mode:                Automatic Scan      Conversion Cott            100                                    Converslon Couns          100                              Number of San:                      48          2. W Scan Mbtion:          Bi-direcionnl      Conversion Units          Degrees                                  Conversion Units          Degrees                          Heed  Rotate PositiO            90.00          , f4 Cafrection:                Default      Radiw In.                  88.19                                    EDAS Radius n              88.19                          Hoist (Pivot Point):            324.05          0-o Module Prameters:                  071      Cal 13                                                            Colibrte Recerds: Eaasbto Notes:                                                                              g two-p" CDkw osais            u i. Dhuijeiu^ Scua..... I.                  J    ......          . _          . AT1        A .              lbn_:
                                                                                                                                                        ....onut t4            e....          ..........
hanenell          On            55        +)                1.40(n            1.35( In                            0801301        instrugnentatiouetubes.                                                              F, Channel2            OR            55                      -* 1.40(in        - 1.35(in)                            0801302                                                                                ue  -
Channel 3 Channel 4 On On SLIC 40 SUC 40
                                              +              +2.00(in)
                                                              - 2.00(iRi)
                                                                                + 1.72(in)
                                                                                + 1.72(in) 0301303 0901304        9a-miuatie. fwrlme
                                                                                                                                                                                                                    +01 l11 "j 0  t::9 Channel 5            On            QL        +              +0    m)        + 1.72(n)                              0801305          Unisted examinaeilo due to the proximity of the core barrel                    R. R Channel 6            Off          NMA      NA                  N/A            NtA                                    NtA                i-ratiottlo      s andthelower head  instrmnatation tubes.                  EL Cln 7                Off          N/A      MrA                  NVA            NWA                                    N/A          Limited scan due to prodmity ofoore lugh &deg;.                                      M Charel8              Off          MA        NMA                  1VA            1/A                                    NVA                                                                                            0 Iereeset & Sfce Positions Actuel                          Rncdae                              _lyittrarks  .sltlea                                                                                      CD C Som No()          bnencm Positio.^
Start          StDO I      Scan EPosidork Start        Sto        t Yes InEllO0 No a
7 NIAAtuiment:
L            Yes la No 2,t4
_i                            3320    34936        37014        Channel 2 n              13        E FortjerEvaluation Qculoae 3 n              CI        0  Reqd                                                                                                        W Lha2ol4 0                la        n        o Yes      E  No Chennet 5 0              0        C1 Ardcive TpeCD No.:                                                                                          9
                                                                    ,Casnel 6 0              0          la            2 hEB
_ channel 7                n        la AnalysIs Tape/CD No.: I la    d _                E3      -( I              N/A Analyst ISNT Lyeel / Date:;Z                              /                                      Z P iOWoM      3. SiTU t k.O\5
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request f:r Relief 1-ISI-18 Altachments Exam Number 6                                                    Page 1 offI /
Watts Bar Unit 1 RPV-W02-A LWR HD Meridional a 0 Deg Cursor Box 1 of 1 Scan Axis                      354.13 -  355.06 Inc. Axis                        14.67 -  19.53 Depth In Material                2.29 -  2.94 Channel 1 Module Coordinates Inc. Axis                        26.20 - 31.01 Scan Axis                      351.21 - 352.14 Channel 1 Feature Analysis                        Summary Conmments No Recordable Indications channels 1, 2, 3, 4, and S.
Channel 2 Module Coordinates Inc. Axis                        26.20  - 31.01 Scan Axis                      357.06  - 357.99 Channel 3 Module Coordinates Inc. Axis Scan Axis                      351.63 - 352.56 Channel 4 Module Coordinates Inc. Axis Scan Axis                        356.64 - 357.57 Channel 5                I Module Coordinates Inc. Axis                                                  :  i Scan Axis                      354.12 - 355.05 1'i i
46 009 l
                                              -//    ",VW Zoe J E3A-6
ISwT Examination Summary Record Prnjct No:                                                                                                                lsiaMMaY Shi    NoW:
368                                                    Watts Bar Nuclear Plant Unit 1                                      1300008 ExaminaUon Are:      Reactor PssureVessot UnelAssembly:        Lower Head MerdIlonal Weld W2B                    O Idennstion:          Lower Head at 60-egrees N
T H
t NOe                                EMA                  R    e            Reoluom CNP iSIJ~hmACH                      Numbefst    Ep Artmi    I  _    Anaift  Record NO.                Renmef AUT          IwrT-4OI-AUT1I/Q        7.8      AVTO      .  .                        AUTOfor Vtimens  asumoe  only.
iZN 2              0      AUTSLC40  X          VM                Exsknon iWNWed  don b* Ce core barel sppor ks md S        AUrS5    X          VM                he boer hed pSoe 7    AUT SUC4OT  X    -    VI 1      AUT55T    X    -    V CD CD
                                                                                                                                                  -4W-i 0.
CD, Prepd By.        Ao                                              ID:                              -Pgo.                  1 SummayNo:
IF        (-                                      1 I124-ar-05                        OFtI300008 I          U 4*1/
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitelPlast: Wafts Bar                                  Wddide1ti6teatim: RPV-W02-E                    Prailt"/ChacN:          lSwT-PDl-AUTI/010/lt2          Ene i          N*i          7 Project Ne.: 0440368                                    sideDesription: LwrHdMaidikma6l              DeviceCeafigrtia: WAT-WALCN-0001 Med.CaEf:    07A                                      ISa. Path Drawisn SPMcid                              Eam Date                Exauminatio  Time              Surface TsIamear IF Data Acqlsitha Operator (s)/ Bii Lval-: Cario      eL s      mrs /                                                                    t            Al              St            l      End
                                                                                                            .1M1      M            16,S17'      IC31                78                  78 Stan Centrefers Parammters        lmemrtAils                  Planned                  Atest    SesaAlts              Phaned            Actual                eomttnal arameters Controller:              PaR          Lowerliht                    5496                5496        Lowerljmt                1160            1480        Beam Diredon:                    Dn/Up Scme                  BonaPivot        Lwer Limit                    6522                6522        UppLmit                  3662            3662        Trans      izcer                  1.00 Ibnrneni            Boom Floe        biereent htmval              54                                Dd                      3                                  Yd%of Overlp:                  10 Mode:              Autmantic Scan    Conversion Cunbts              100                              Conversion Counts        100                          Nunmber of Scw.                      20 ScaaMotion:          Bl-directitnl    Conversion Usite              Degees                            Convertion Units        Derees                      Heed Rotae poshim:                0.00 Correclion:              Default      Radius In.                    88.19                              ___________loist                                          (ivotPoint):              324.05  u:00 Medale Parmntsem                07A        Col 13                                                      Callbratlo. Records:  IE1Anw          Nd.es                              .o states          ASIPe  ujymues            MWAM  Lnaa      Simp Giu                                                                                    m;  -h oi    ho Channcl I        On            55        (-)
* 1.40(in)        1.35(n)                      0801301          Instrumentation tubes.
C D-IO' Channel 2        on            55        (+N              + 1.40(in)      - 135fn)                        0801302 Chanelt3          On          SLIC40        (-)              . 2.001in)      + 1.72(in)                      0801303 Channel 4        On          SUC 40        +)              +2. Wip)        + 1.72(in)                      0801304          raeuulmatilaa Reiarls:
Cmbnnel 5        On            OL          +              + 0.00(in)        + 1.72(in)                      0801305            Linuted exsmination dueto the prxlmity ofth core brel Channel 6        Off          NIA        N/A                  NIA          N/A                            NIA              anti-roation ulgs and the lower head instrumentstimo tubes.
Channct7          Off          NIA        N/A                  NIA          N/A                            N/A channel I        off          N/A        N/A                  N/A          NIA                  I          NA Increment & Sean Pasitisus Adevl                            Rcotrdable Indications                                            A, WRemarls Incremnt Position              Scan Position                  Yes      No      NIA Aidasnte n                                                                                        tzl ScanN_ .)        Stait          sto        Start        Stoo      Channel    03      EaI                  Yes i    No I - 16      5498          6306        1478        3662      Channel 20          2a      0] Fiurtr Evaluation 17 -20        6361          6525        1478        2999      Channel3 0          2      0 Required:
__4        03_laCluuinel4 le      0        OYeaW No Channel 50          0      [a Archive Tape/CD No:
Channel 6  O        0          I        2 A__
channe 7  0        n      (    Anslsis Tape/CD  No.:    _
                                                                )      ChannellO          i0      G              N/A              __      _        _      _    _      _      _    _    _    _
Aaalyst SNT Level Date:              -  -                                /
aWrn oams UTSrtie. am)
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number Exam 7                                            Page  1 of I w Watts Bar Unit 1 RPV-W02-3 LWR Rd Meridional @ 60 Deg Cursor Box 1 of 1 Scan Axis                        14.89 - 15.82 Inc. Axis                        S9.48 - 64.34 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                        60.38 -  65.25 Scan Axis                        17.81 -  18.74 Channel 1 Feature Analysis                      summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                        60.38 - 65.25 Scan Axis                        11.96 - 12.89 Channel 3 Module Coordinates Inc. Axis                        58.27 - 63.06 Scan Axis                        17.39 - 18.32 Channel 4 Module Coordinates Inc. Axis                        58.27 - 63.06 Scan Axis                        12.38 - 13.31 Channel 5 Module Coordinates Inc. Axis                        58.27 - 63.06 Scan Axis                        14.90 - 15.83 4CA/04  2Z2        //,ore Z7&deg;J-E3A-9
111H    SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/flee t: Wat Bar                                    aidid eatha: RPV-W02-B                        tPua vf(n 1CiR:        iSwT-pFlt-AUl/0/OtfV1&                      N:          S Pr.ect Na.: 04-0368                                    lWidlD lpti: LeerndMeridonal g60                    vD Casllwrstona: WAT-WALCON-0001 Mad.Caf: 07B                                          ISeas Path Drawine: SPMwid                              Esxa Date            Examinatien Time                Suafte T.-peratre. eg Data Aeqisition Operatar (a)I SNT Level: David IL ldelajam/ IU                                                        2ad          Start                          Start        i    End 164        1638                78          1    7 Sea Controller Parameters          Iacnesurt Axi              Ple d                      AelUst    Sean Axis            Pleased          Actual              Positional Parametera Controller:                PaR        Lower Limit                  1160                    1414        LowerLmit              4986            4986        Beam DkrcetiOm                CW/CCW ScanBm                        Rotate    U      Lpp imit              369i                  3700        Upp limit              7014            7014        Transducer Sim:                  1.00 Incmtentt            Wean Pivot        Inement Interval            54                                  DC]                    3                          COdeofOveaip:                      10 Modet              Automatic Scan      Conversion Cotnts            100                                Conversion CorntJ      100                        Number ofSauns:                    4S Scan Modon:          Bi-directional    ConverilontUnits            Degrees                            ConversionUnits        Degrees                    Heag RotatePositiont            90.00 Correctim:                Default      Radln In.                    R8.I9                              EDAS Radius In.        8S.19                        Moit (pivotPoint):            32405  CD3 Mud0le Parametei:                  *7B    Cal 13                                                        Callbratioa Records:  lxamlnotbn Noates:
Stata.            Aale  1rertina          Rea.Offseat      SWf Offeat                      WAT.1          lChankforlimitations due    to thenrolmitv of the lwerhad Clannel 1          On              55      (4)              + 1.40(in)        - 1.35(ir)                    001301          Instrumentalionitubes.
Channel2          On              55      (-)              - 1.40(fn)          135(in)                      0801302 Channel3          On          SiC 40      (4)              + 2.00(in)        + 1.72(in)                      0201303 Channel4          On          SXC 40      (-)              - 2.00(irO        + 1.72(ib)                    0201304          Examination Reanri:
Channel 5          On              OL      (4)                0.00fi)          + 1.72(in)                    0801305          Lbnited minatian duo to the          uriitofthe re be Channel 6          Off            NtA      NtA                  N/A              HtA                            N/A            anti-rttian lugs and the lower head insbrutntasion tubca.
Channel 7          Off            NtA      NtA                  N/A              N/A                            N/A channel            Off            N/A      bV/N          I      AA              N/A                            INA                                                                            W0Q Inacrmeat & Scan Posltions Actual                            Recordable Indieatins                                            Analyst Remsarl Incremnt Poseition            Sean Poeition                                                                                                                                          CD -.
SSatNo          Stsrtr)          S        Start          Stop      Channetll Yes 0      No
[ a NI Atndtament:o Yes E No I- 44        14S3            34S4    4986          7014      Chanoel      0                0 Further Evaluation O
45-4S        3533            3700    4926          6432      Channcli      0        A      0 Required.
____ __                                  li    43 O        Fd      0i        D Yes      No ChannelS 0            0      2  Arxdive Tap/CD No.:
_Cbannel 6    Ci      a        2          2 AtB
_                                                      C        7 0        Ci      la  Analysis TaWCl) No.:
__Cannel
_                                        t___    S 0i                  A            N/A Analyst I SNT Level 1Date:                                  /    ga        /,        /          .
,SwFoamN.. Ufa M..Mola)
Enclosure 3 Watts Bar Nuclkar Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number Bxam 8                                            Page  I of I 4 Watts Bar Unit 1 RPV-W02-B LWR HD Meridional @ 60 Deg Cursor Box 1 of 1 Scan Axis                          54.13 - 55.06 Inc. Axis                          14.67 - 19.53 Depth In Material                    2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                          25.62 - 30.49 Scan Axis                          51.21 - 52.14 Channel I Feature Analysis                        Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                          25.62 - 30.49 Scan Axis                          57.06 - 57.99 Channel 3 Module Coordinates Inc. Axis Scan AXiS                          51.63 - 52.56 Channel 4 Module Coordinates Inc. Axis Scan Axis                          56.64 - 57.57 Channel 5 Module Coordinates Inc. Axis Scan Axis                          54.12 -  55.05
                                          /=/  Me04-E3A-1 1
? 0 a    pit
    ~9~e AA an -


LwMrHdMeridionalil 0 Device Colra : WAT-WALCON-0001 Mod.Csut:
1dpl.                                                   IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SiteJaltso: Watts Bar                                 W0 idIdtilet           RPV-W02.C                 Pro/Rev/Clm/ICN:       ISwT-PDI-AUTlJ/0/II&2         lxgulaattla No:
07B sm Patl Drawla SPMerid E Dt hxasiale Tie. Surfaee Tempera F Dubs Acquisition Operator (#)I SNY Levekl ). Rle~mauaiI St End I Start Find 181e 'l8l 1i30 78 71 Sean Controller Parameters lacreeeat Axis Pluaned Actual Se Planned Actual Positional Parameters Controller:
TroectsNe: 04436i                                     WeldaDejdbe: LvwrHdMeridioaol               1? 'DevlceCon araeton: WAT-WALCON-4001 M d.Conf.: 07A                                         Ssa P ath Drawlnr SFN~idt                             Exam Date           Es aatton Tim                     Surface Tern turn IF Data Aequisitieo Operateo (s)I SNT Lw*: Cari         sL Serrers l HI                                       10March 2005                           Fad               Stea           I       Ed Seas Co.t reller Parameters         IEarewsent Ais       -   Pleased                   Actual     SeamAish              Planned             Actual               Positional Foeastetrs                     g2-Controller.               PaR           lOWerLimit                 11496                 1149t       LowerLimit             1160             1480         BeamDirection:
PaR LoweriLnit 1160 1540 LoweLiml 34986 34936 Beam Direction:
Scan:                 Boom Pivot         UpperLimit                 12522                 12522       Uper Limit             3662             3600       Trasduccr Size:                     1.0 Increment           Rnom Rotate         TDnsunmt interval           54                                 WI                     3                             Code % of Overlap:                   10 Mode:               Automatic Scan       Conversion Cout             100                               Conversion Coumts 100                                 Number of Scans:                       20 Scan Motion:         Bi-directioni       Conmrion Unit               Degrees                           Conversion Units       Degrees                       Had Rotate rosition:               0.00 Coirecton:               DLleht         Radius IL.                 S1.19                             Radius in.             81.19                         qoit(PiivotPoint):               324.05 rA 0 0 Mdedal Parnsetnteu.             07A       Cal 13                                                       Calibration Records: llixamhntion Note:
Cw/CcW Scam Boom Rotate UppDLimut 3698 3699 Una lUmit 37014 37014 Tranduer Si= 1.00 b.Meat Boom Pivot lnmemase interval 54 DCI 3 Code % of Overlap: 10 Mode: Automatic Scan Conversion Cott 100 Converslon Couns 100 Number of San: 48 Scan Mbtion: Bi-direcionnl Conversion Units Degrees Conversion Units Degrees Heed Rotate PositiO 90.00 Cafrection:
Sb.t.         A..I.     TV.-I..           ..0 ngife 5       tq      tffse                       WAT-1I3         Chadi for limitations dcn totthe oronuimitv of the lwaer hatd mannelet         On           55                         - 1.40(in)           1.35(in)                     0301301         Instrumentation tubes.
Default Radiw In. 88.19 EDAS Radius n 88.19 Hoist (Pivot Point): 324.05 Module Prameters:
Clsael 2           On           55                         + 1.4(in           - 1.35 n)                       0801302 Channed3           On       SLIC40         1               - 2.00in           + 1.72in)                       0801303 Channed4           On       SUC440         N               + 2.00(in)         + 1.72(in)                     0801304         xaauluistion Remarks:
071 Cal 13 Colibrte Recerds: Eaasbto Notes: osais u i. Dhuijeiu^
Channel 5           On           OL         (+)               0.oo(in)       + 1.72(in)                     001305           lmitehd waminstion dowto the proximity offt m         rthbarrel Channel 6         Off         MA           N/A                 N/A             N/A                             NMA           anti-rotation lupi and tbe lower head instrunentation tubes.         .1.
Scua.....
Csnd7             Off         N/A         N/A                 NMA             NIA                             N/A Chmnell         - Off         N/A         N/A                   MA             N1A                             NA enn -
I. J ...... .._ AT1 A .lbn_: t4 ....onut e.... ..........
____Incremenet      & Sca. Pesitioms Actual                       Recordable Indicatiens                                             Analyst Remarks Scan No.(s)     h         Porslition         ScanPosition                      Yes     No       NWA
hanenell On 55 +) 1.40 (n 1.35( In 0801301 instrugnentatiouetubes.
Channel2 OR 55 -* 1.40(in -1.35(in) 0801302 Channel 3 On SLIC 40 + +2.00(in)
+ 1.72(in) 0301303 Channel 4 On SUC 40 -2.00(iRi)
+ 1.72(in) 0901304 9a-miuatie.
fwrlme Channel 5 On QL + + 0 m) + 1.72(n) 0801305 Unisted examinaeilo due to the proximity of the core barrel Channel 6 Off NMA NA N/A NtA NtA i-ratiottlo s and thelower head instrmnatation tubes.Cln 7 Off N/A MrA NVA NWA N/A Limited scan due to prodmity ofoore lugh &deg;.Charel8 Off MA NMA 1VA 1/A NVA Iereeset & Sfce Positions Actuel Rncdae .sltlea _lyittrarks Som No() bnencm Positio.^
I Scan EPosidork Yes No NIAAtuiment:
Start StDO Start Sto t InEll 0 a O 7 L Yes la No_i 3320 34936 37014 Channel 2 n 13 E FortjerEvaluation Qculoae 3 n CI 0 Reqd Lha2ol4 0 la n o Yes E No Chennet 5 0 0 C1 Ardcive TpeCD No.: ,Casnel 6 0 0 la 2 hEB_ channel 7 la n AnalysIs Tape/CD No.: I la d _ E3 -( I N/A Analyst ISNT Lyeel / Date: / ;Z Z P iOWoM 3. SiTU t k.O\5 ue -+01 l11 j " 0 t n 0.0 (A 0in 2. Wf4 g two-p" kw CD F, t::9 R. EL M 0 CD 2,t4 W 9 Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request f:r Relief 1-ISI-18 Altachments Exam Number 6 Page 1 off I /Watts Bar Unit 1 RPV-W02-A LWR HD Meridional a 0 Deg Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Conmments Module Coordinates Inc. Axis Scan Axis 354.13 -355.06 14.67 -19.53 2.29 -2.94 Channel 1 26.20 -31.01 351.21 -352.14 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and S.Channel 2 26.20 -31.01 357.06 -357.99 Module Coordinates Inc. Axis Scan Axis Channel 3 351.63 -352.56 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis 46 009 Channel 4 356.64 -357.57 Channel 5 354.12 -355.05-// ",VW Zoe J I: i 1' i i!l E3A-6 ISwT Examination Summary Record Prnjct No: lsia MMaY Shi NoW: 368 Watts Bar Nuclear Plant Unit 1 1300008 ExaminaUon Are: Reactor PssureVessot UnelAssembly:
Lower Head MerdIlonal Weld W2B O Idennstion:
Lower Head at 60-egrees T N H NOe EMA R e Reoluom CNP iSIJ~hmACH Numbefst Ep Artmi I _ Anaift Record NO. Renmef AUT IwrT-4OI-AUT1I/Q 7.8 AVTO ..AUTO for Vtimens asumoe only.iZN 2 0 AUTSLC40 X VM Exsknon iWNWed don b* Ce core barel sppor ks md S AUrS5 X VM he boer hed pSoe 7 AUT SUC4OT X -VI 1 AUT55T X -V Prepd By. Ao ID: -Pgo. 1 SummayNo: IF 1 (- I124-ar-05 OFt I300008 t CD CD-4W-i 0.CD, I U 4*1/
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitelPlast:
Wafts Bar Wddide1ti6teatim:
RPV-W02-E Prailt"/ChacN:
lSwT-PDl-AUTI/010/lt2 Ene i N*i 7 Project Ne.: 0440368 side Desription:
LwrHdMaidikma6l DeviceCeafigrtia:
WAT-WALCN-0001 Med.CaEf:
07A ISa. Path Drawisn SPMcid Eam Date Exauminatio Time Surface TsIamear IF Data Acqlsitha Operator (s)/ Bi i Lval-: Cario eL s mrs / Al t St l End.1 M1 M 16,S17' IC31 78 78 Stan Centrefers Parammters lmemrtAils Planned Atest SesaAlts Phaned Actual e omttnal arameters Controller:
PaR Lowerliht 5496 5496 Lowerljmt 1160 1480 Beam Diredon: Dn/Up Scme Bona Pivot Lwer Limit 6522 6522 UppLmit 3662 3662 Trans izcer 1.00 Ibnrneni Boom Floe biereent htmval 54 Dd 3 Yd% of Overlp: 10 Mode: Autmantic Scan Conversion Cunbts 100 Conversion Counts 100 Nunmber of Scw. 20 ScaaMotion:
Bl-directitnl Conversion Usite Degees Convertion Units Derees Heed Rotae poshim: 0.00 Correclion:
Default Radius In. 88.19 ___________loist (ivotPoint):
324.05 Medale Parmntsem 07A Col 13 Callbratlo.
Records: IE1Anw .o Nd.es states ASIPe ujymues MWAM Lnaa Simp Giu m; oi ho -h Channcl I On 55 (-)
* 1.40(in) 1.35(n) 0801301 Instrumentation tubes.Channel 2 on 55 (+N + 1.40(in) -135fn) 0801302 Chanelt3 On SLIC40 (-) .2.001in) + 1.72(in) 0801303 Channel 4 On SUC 40 +) +2. Wip) + 1.72(in) 0801304 raeuulmatilaa Reiarls: Cmbnnel 5 On OL + + 0.00(in) + 1.72(in) 0801305 Linuted exsmination due to the prxlmity ofth core brel Channel 6 Off NIA N/A NIA N/A NIA anti-roation ulgs and the lower head instrumentstimo tubes.Channct7 Off NIA N/A NIA N/A N/A channel I off N/A N/A N/A NIA I NA Increment
& Sean Pasitisus Adevl Rcotrdable Indications A, WRemarls Incremnt Position Scan Position Yes No NIA Aidasnte n ScanN_ .) Stait sto Start Stoo Channel 3 0 aI E Yes i No I -16 5498 6306 1478 3662 Channel 20 2a 0] Fiurtr Evaluation 17 -20 6361 6525 1478 2999 Channel3 0 2 0 Required:__4 3_laCluuinel4 0 le 0 OYeaW No Channel 50 0 [a Archive Tape/CD No: Channel 6 O 0 I 2 A__channe 7 0 n ( Anslsis Tape/CD No.: _) ChannellO i0 G N/A __ _ _ _ _ _ _ _ _ _Aaalyst SNT Level / Date: --aWrn oam s UT Sr tie. am)u:00 C D-IO'tzl Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number Exam 7 Watts Bar Unit 1 RPV-W02-3 LWR Rd Meridional
@ 60 Deg Page 1 of I w Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 14.89 -15.82 S9.48 -64.34 2.29 -2.94 Channel 1 60.38 -65.25 17.81 -18.74 Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis Channel 1 summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 60.38 -65.25 11.96 -12.89 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 3 58.27 -63.06 17.39 -18.32 Channel 4 58.27 -63.06 12.38 -13.31 Module Coordinates Inc. Axis Scan Axis Channel 5 58.27 -63.06 14.90 -15.83 4CA/04 2Z2//,ore Z 7&deg;J-E3A-9 111H SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/flee t: Wat Bar aidid eatha: RPV-W02-B tPua vf(n 1CiR: iSwT-pFlt-AUl/0/OtfV1&
N: S Pr.ect Na.: 04-0368 lWidlD lpti: LeerndMeridonal g60 vD Casllwrstona:
WAT-WALCON-0001 Mad.Caf: 07B ISeas Path Drawine: SPMwid Esxa Date Examinatien Time Suafte T.-peratre.
eg Data Aeqisition Operatar (a) I SNT Level: David IL ldelajam/
IU Start 2ad Start i End 164 1638 78 1 7 Sea Controller Parameters Iacnesurt Axi Ple d AelUst Sean Axis Pleased Actual Positional Parametera Controller:
PaR Lower Limit 1160 1414 LowerLmit 4986 4986 Beam DkrcetiOm CW/CCW ScanBm Rotate U Lpp imit 369i 3700 Upp limit 7014 7014 Transducer Sim: 1.00 Incmtentt Wean Pivot Inement Interval 54 DC] 3 COdeofOveaip:
10 Modet Automatic Scan Conversion Cotnts 100 Conversion CorntJ 100 Number of Sauns: 4S Scan Modon: Bi-directional ConverilontUnits Degrees ConversionUnits Degrees Heag RotatePositiont 90.00 Correctim:
Default Radln In. R8.I9 EDAS Radius In. 8S.19 Moit (pivotPoint):
32405 Mud0le Parametei:
*7B Cal 13 Callbratioa Records: lxamlnotbn Noates: Stata. Aale 1rertina Rea. Offseat SWf Offeat WAT.1 lChankforlimitations due to the nrolmitv of the lwerhad Clannel 1 On 55 (4) + 1.40(in) -1.35(ir) 001301 Instrumentalion itubes.Channel2 On 55 (-) -1.40(fn) 135(in) 0801302 Channel 3 On SiC 40 (4) + 2.00(in) + 1.72(in) 0201303 Channel4 On SXC 40 (-) -2.00(irO + 1.72(ib) 0201304 Examination Reanri: Channel 5 On OL (4) 0.00fi) + 1.72(in) 0801305 Lbnited minatian duo to the uriit of the re be Channel 6 Off NtA NtA N/A HtA N/A anti-rttian lugs and the lower head insbrutntasion tubca.Channel 7 Off NtA NtA N/A N/A N/A channel Off N/A bV/N I AA N/A INA Inacrmeat
& Scan Posltions Actual Recordable Indieatins Analyst Remsarl Incremnt Poseition Sean Poeition Yes No NI Atndtament:
SSatNo r) Stsrt S Start Stop Channetll 0 [ a o Yes E No I- 44 14S3 34S4 4986 7014 Chanoel 0 0 O Further Evaluation 45-4S 3533 3700 4926 6432 Channcli 0 A 0 Required.____ __ li 43 O Fd i Yes 0 D No ChannelS 0 0 2 Arxdive Tap/CD No.:_Cbannel 6 Ci a 2 2 AtB_ C 7 0 Ci la Analysis TaWCl) No.: t___ _ __Cannel S 0i A N/A Analyst I SNT Level 1 Date: / ga /, / .,SwFoamN..
Ufa M..Mola)CD3 W0Q CD -.
Enclosure 3 Watts Bar Nuclkar Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number Bxam 8 Page I of I 4 Watts Bar Unit 1 RPV-W02-B LWR HD Meridional
@ 60 Deg Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis 54.13 -55.06 14.67 -19.53 2.29 -2.94 Channel 1 25.62 -30.49 51.21 -52.14 Channel I Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 25.62 -30.49 57.06 -57.99 Channel 3 Module Inc.Scan Coordinates Axis AXiS 51.63 -52.56 Module Coordinates Inc. Axis Scan Axis Channel 4 56.64 -57.57 Module Coordinates Inc. Axis Scan Axis Channel 5 54.12 -55.05/= / Me04-E3A-1 1
? 0 a pit A A~9~e an -
1dpl. IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SiteJaltso:
Watts Bar W 0 idIdtilet RPV-W02.C Pro/Rev/Clm/ICN:
ISwT-PDI-AUTlJ/0/II&2 lxgulaattla No: Tro ectsNe: 04436i WeldaDejdbe:
LvwrHdMeridioaol 1? 'DevlceCon araeton: WAT-WALCON-4001 M d.Conf.: 07A Ssa P ath Drawlnr SFN~idt Exam Date Es aatton Tim Surface Tern turn IF Data Aequisitieo Operateo (s) I SNT Lw*: Cari sL Serrers l HI 10 March 2005 Fad Stea I Ed Seas Co.t reller Parameters IEarewsent Ais -Pleased Actual Seam Aish Planned Actual Positional Foeastetrs Controller.
PaR lOWerLimit 11496 1149t LowerLimit 1160 1480 Beam Direction:
Scan: Boom Pivot UpperLimit 12522 12522 Uper Limit 3662 3600 Trasduccr Size: 1.0 Increment Rnom Rotate TDnsunmt interval 54 WI 3 Code % of Overlap: 10 Mode: Automatic Scan Conversion Cout 100 Conversion Coumts 100 Number of Scans: 20 Scan Motion: Bi-directioni Conmrion Unit Degrees Conversion Units Degrees Had Rotate rosition:
0.00 Coirecton:
DLleht Radius IL. S1.19 Radius in. 81.19 qoit(PiivotPoint):
324.05 Mdedal Parnsetnteu.
07A Cal 13 Calibration Records: llixamhntion Note: Sb.t. A..I. TV.-I.. ..0 5 ngife t q tffse WAT-1I3 Chadi for limitations dcn tot the oronuimitv of the lwaer hatd mannelet On 55 -1.40(in) 1.35(in) 0301301 Instrumentation tubes.Clsael 2 On 55 + 1.4(in -1.35 n) 0801302 Channed3 On SLIC40 1 -2.00in + 1.72in) 0801303 Channed4 On SUC440 N + 2.00(in) + 1.72(in) 0801304 xaauluistion Remarks: Channel 5 On OL (+) 0.oo(in) + 1.72(in) 001305 lmitehd waminstion dow to the proximity offt rth m barrel Channel 6 Off MA N/A N/A N/A NMA anti-rotation lupi and tbe lower head instrunentation tubes.Csnd7 Off N/A N/A NMA NIA N/A Chmnell -Off N/A N/A MA N1A NA____Incremenet
& Sca. Pesitioms Actual Recordable Indicatiens Analyst Remarks Scan No.(s) h Porslition Scan Position Yes No NWA  


==Attachment:==
==Attachment:==


Start Stp Start Stop Channe IO [ -O 0 Yes a NO 1-20 1411 12527 11497 3602 Channel2 0 Li i3 FurtherEvaluation Catnnel 3 0 21 0 Required: Channel4 0 21 0 0 Yes GI No_ Channel 5 0 0 2[ Archive Tspc/CD No.:-_Channel6
Start         Stp         Start         Stop     Channe IO             [     -O         0 Yesa      NO 1-20         1411         12527       11497         3602       Channel2 0           Li       i3 FurtherEvaluation Catnnel 3 0           21 0 Required:
[0 0 l 2A/EB Channel7 0 2E Anadsjia TapeCD No.:_ Sb nt i S O i3 El N/A Aalyst / SNT Leval I Dat r // N/A UObT5OMIII.
Channel4 0           21       0         0 Yes GI No
0THe B..Gwfl)g2-rA 0 0.1.enn -
_            Channel 5 0           0       2[ Archive Tspc/CD No.:
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)hiservice Inspection Program Request for Relief 1-1SI-18 Attachments Exam Number Exam 9 Page l of I w Watts Bar Unit 1 RPV-W02-C LWR Hd Meridional a 120 Deg Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 16.96 -17.89 119.48 -124.34 2.29 -2.94 Channel 1 120.44 -125.27 19.88 -20.81 Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 120.44 -125.27 14.03 -14.96 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 3 118.25 -123.09 19.46 -20.39 Channel 4 118.25 -123.09 14.45 -15.38 Module Coordinates Inc. Axis Scan Axis Channel 5 118.25 -:23.09 16.97 -:7.90// Hwa< ZOOS -E3A-14
                                              -_Channel6                         [0     0         l           2A/EB Channel7 0                     2E Anadsjia TapeCD No.:
__11L_Mw 1IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Lite!Tbaat Watfts l~ar eld Ideatificatiom MIod.C011L:
_           Sb                   nt i S O       i3       El             N/A Aalyst / SNT Leval I Dat             r           //                                                             N/A UObT5OMIII. 0THeB..Gwfl)
07B 13cms lath Drawiui Dati& Acquhloltlm peretar (a)/SNT Level ai 0h Keea Stan Coatraller Parawaaterg Iueroaaut A-&a plans," Controller PaR Lower [Urnit 1 160 Scaw Baoom Retain Upper Limit 3698 Inceremenit:
 
Blomn Pivot lacreavent Iuntral 54 Mode: Automnatic Scan Chavarolon Coantst 100 Scan Motion: DI-dL-eeiloaal Ccavualioa Urjth Duei Correction:
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME) hiservice Inspection Program Request for Relief 1-1SI-18 Attachments Exam Number Exam 9                                                   Page l of I w Watts Bar Unit 1 RPV-W02-C LWR Hd Meridional a 120 Deg Cursor Box 1 of 1 Scan Axis                         16.96 - 17.89 Inc. Axis                      119.48 - 124.34 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                      120.44 - 125.27 Scan Axis                        19.88 - 20.81 Channel 1 Feature Analysis                         Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Default Radius In. 381.19 , PruiPZwIChwIcN:
Channel 2 Module Coordinates Inc. Axis                        120.44 - 125.27 Scan Axis                        14.03 - 14.96 Channel 3 Module Coordinates Inc. Axis                       118.25 - 123.09 Scan Axis                        19.46 - 20.39 Channel 4 Module Coordinates Inc. Axis                        118.25 -     123.09 Scan Axis                          14.45 -   15.38 Channel 5 Module Coordinates Inc. Axis                       118.25 - :23.09 Scan Axis                          16.97 - :7.90
ISwT-PDI-AtfIJV0/Q11k2 Elermnsatie No.: 10_@W--,. T VA _nnnl uenee sos nIUZIIU (GR IZ-=_- ..---stonTis. Surface Tearperattre CE 10 March 2005 start I Rad St.rt I Ein 1~j 7 05 1 7 1... a ".!aw I 781 78 I IActual Scan Asia 1537 lLowerL Uit 10986 I 10986 1 3698 1Upper liit 13014 l 13014 to DC[0oavwrsiort Counts Conversion Units Rn AR no1i .. In t 100 DVerees 81.19 Palica Przutr Beam Direokxc CwICC%Tr.ndic Size: 1.00 node % of Ovprlw. 10 Numuber of Scams: 48 Head Ilotale poaition:
                                                      //   Hwa< ZOOS -
90.00 Floilf (Pivnt Mra!nf 3240n1 1,., ._ a ,.d_ .t. .._ .___,. ................  
E3A-14
,_a,,, Medale Paramseters:
 
07B Gal 1it Calibration Recacrds: SWot...- A..ot. -Dircdr.f., 5.... oW.t 5t lf- t %I -r I WAT-13 Channel I on 55 (+) + LOWCm .1.35(in) it 0801301 41 as due to the rroxdmity of the lower head m anlation tubes.wrial 2 on 55 Id1 -1.40(in) -1.3511aa)0801302 Shanoi3 On t StC_40 ) C200 hai m l Fl.72(in3 0l01303 Ch -n d4 On S C40 3
__11L_                                                      1IHI SOUTHWEST TECHNOLOGIES Mw                                            AUTOMATED ULTRASONIC EXAMINATION RECORD Lite!Tbaat   Watfts l~ar                                   eld Ideatificatiom                                 PruiPZwIChwIcN:          ISwT-PDI-AtfIJV0/Q11k2 Elermnsatie No.:                          10 IZ uenee sos
* Z.00in) +31.72(in) 4 0801304 0 g 0 jetlo Retttoi: 2harwed 5 oft ot 1O + 0,00(in) +11.71(uk) 1 0801305 1Limuited examination due to the proximity of the, core banrel Q~d6 Of NiA NMANA NANA adrttnlg anbd the lower head in oon tubgs.Chauaaci 7 off N/A NtA NIA N/A N/A_Cannel 8 Off N3A N0A _NA NRA Nr A_ __ _ _ __ -_ _ _ _ _hae4 _ _ -Ye~N Scan No.(s) incrent Swt-o position Yes No Nt.  
                                                                                                    -=_-(GR..
nIUZIIU          _@W--,.              T      VA      _nnnl MIod.C011L: 07B                                         13cms lath Drawiui                                                           - -    - stonTis.                            Surface Tearperattre CE Dati&Acquhloltlm peretar (a)/SNT Level               ai 0hKeea                                                                                start I          Rad                    St.rt            I              Ein 10 March 2005 1~j05 7        171                        781                            78 Stan Coatraller Parawaaterg           Iueroaaut A-&a             plans," I                      IActual  Scan Asia                    ... a".!aw I                Palica Przutr Controller                 PaR               Lower [Urnit               1160                  1537          lLowerLUit                  10986      I      10986          Beam  Direokxc                              CwICC%
Scaw                 Baoom   Retain         Upper Limit                 3698             1    3698        1Upper liit                  13014        l    13014            Tr.ndic Size:                                    1.00 Inceremenit:           Blomn Pivot           lacreavent Iuntral         54                                     DC[                        t                                  node %of Ovprlw.                                    10 Mode:               Automnatic Scan         Chavarolon Coantst         100 Scan Motion:         DI-dL-eeiloaal         Ccavualioa Urjth           Duei to 0oavwrsiort Counts Conversion Units 100 DVerees Numuberof Scams:
HeadIlotale poaition:
48 90.00
                                                                                                                                                                                                                                        ~.     .
Correction:              Default            Radius In.                 381.19                                Rn AR no1i .. In         81.19                               Floilf (Pivnt Mra!nf                           3240n1 1,
                                                                                                                  .,           ._ a                                           ,.d_ . t. . ._ . ___,. ................       ,_a,,,
Medale Paramseters:               07B           Gal 1it                                                           Calibration Recacrds:
SWot...-       A..ot.   - Dircdr.f.,         5.... oW.t       5tt lf-
                                                                                    %I                         I           WAT-13 m  Channel I         on             55             (+)             + LOWCm         . 1.35(in)
                                                                                                  -r it           0801301 41         as due to the rroxdmity of the lower head anlation tubes.
0  E wrial 2         on             55             Id1           - 1.40(in)       - 1.3511aa)                           0801302                                                                                                       -    w Shanoi3         On t       StC_40             )                     C200 hai mFl.72(in3 l                                    0l01303 Ch -n d4         On         S 3 C40
* 4Z.00in)       +31.72(in) 0       g         0         jetlo 0801304                          Retttoi:                                                                     ; o0 n
2harwed 5 Q~d6 oft Of ot NiA 1O             + 0,00(in)       +11.71(uk)                 1         0801305         1Limuited examination due to the proximity of the, core banrel NMANA                               NANA                                                   adrttnlg           anbdthe lower head in               oon             tubgs.                 Ci2 Chauaaci 7         off           N/A           NtA                 NIA             N/A                                 N/A
_Cannel8        Off           N3A             N0A             _NA               NRA                                   Nr A Scan No.(s)     incrent         Swt-o                 position                   Yes     No         Nt.  


==Attachment:==
==Attachment:==


a -4 1537 3698 10966 13014 Channel2 03 la O FurtherEvalation.
a -4         1537           3698           10966       13014 _      _
_ A~~Cannad 3 0 1 cusd_ Chandel4 0 Ela O3 O3 Yes 13 No Chatnrz 5 0 0 e ArchiveTapeTCD No.:_ _Channdl 6 0 O1 lai 2 AlItR___ __ __ _ Channel 7 0 n 13 Analyss Tape/ No.: A s _ S_ Cevuell 8 0 0 la N/A Analyst I SiNT' Level I Dd a ,t//_~. .0 E-w; o0 n Ci2 KWT 10111 M. UT sa ta.-VA2 Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number 10 Page I of 2 Watts Bar Unit .RPV-W02-C LWR MD Meridional
Channel2     03     la                   _hae4 O FurtherEvalation.                                   _                                _            -Ye~N
* 120 Deg Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments module Coordinates Inc. Axis Scan Axis 114.13 -115.06 14.67 -19.53 2.29 -2.94 Channel 1 26.18 -31.01 111.21 -112.14 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 26.18 -31.01 117.06 -117.99 Module Inc.Scan Module Inc.Scan Coordinates Axis Axis Coordinates Axis Axis Channel 3 111.63 -112.56 Channel 4 116.64 -117.57 Module Coordinates Inc. Axis Scan AXiS.4 AIE=Channel 5 114.12 -115.05 a- /1 2j'.2'Ov'r E3A-16 ISwT Examination Summary Record Pnreect No: Sft: l ry Shet No.: 388 Watts Bar Nuclear Plant Unit 1 300034 Examinlaton Area: Reactor Pressure Vesrel Lne/Assembly:
_                   A~~Cannad 3 0         1                   cusd
Lower Head Meddional Weld W2D 0 Identification:
_      Chandel4 0         Ela       O3           O3 Yes 13 No Chatnrz 5 0         0         e ArchiveTapeTCD No.:
Lower Head at 180-degrees T N.e P... e R E Resoluln CNF AUT Is3r-eeAvuTrIO 11,12 AUMo AUTO kw e lrmes s rneeeswemer, ory.CN2 12 AUISLIC40 X VM EvwnellonnftbduetoetefvbandppolkWand 0 O 12 AUT55 X VM e Iwshead r penet o, t1 AUT SUC4OT X VM CD C 1 ..X A l -1dM CD 12o4 to PvVred my: ftge j .n>~swnemy No-Iw 2aO OF1 300)034 _i IEn  
_                       _Channdl                     6 0         O1       lai               2 AlItR
,1lI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMNATION RECORD SitePlnt:
___ __           __           _               Channel 7 0         n         13 Analyss Tape/ No.:
Watts Bar Weld IdenUflatiod:
A s                   _     S_                       Cevuell 8 0         0         la                 N/A Analyst I SiNT'Level I Dd a         ,t//_
RPV-W02-D
KWT10111 M. UTsa ta.-VA2
_ Pr/o11tesCaCK:
 
lSwvr-PDl-AUTrfl/tOl&2 ExamlhstlinNo:
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
ll ProJeetNw 04-036< Wel lcripton:
Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number 10                                                     Page I of 2 Watts Bar Unit .
LswdiMcdionsal8 D evkeCaiiratb WAT-WALCON-0 01 Mod.Ceaf:
RPV-W02-C LWR MD Meridional
07A ScanPathDrawiny SMclid EDe j Examination Time- Srfe Temn~ot]re Date AcqjisitionOperator(s)/SNTLevel:
* 120 Deg Cursor Box 1 of 1 Scan Axis                       114.13 - 115.06 Inc. Axis                         14.67 - 19.53 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                        26.18 - 31.01 Scan Axis                      111.21 - 112.14 Channel 1 Feature Analysis                        Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
CarlosALBarrera ilfl ltMo 2005 Rt. t rt lia stdrt i 1552 1601 79 1 Stan Contrafler Parameten Increment Axis Planned Actual Scan Axls Planned l Actual Positional Parameters Controller.
Channel 2 module Coordinates Inc. Axis                        26.18 - 31.01 Scan Axis                      117.06 - 117.99 Channel 3 Module Coordinates Inc. Axis Scan Axis                       111.63 -   112.56 Channel 4 Module Coordinates Inc. Axis Scan Axis                      116.64 - 117.57 Channel 5 Module Coordinates Inc. Axis Scan AXiS                       114.12 - 115.05 AIE=
PaR LowerLimit 17496 17496 Lower Linit 1160 14S0 Bem Direction:
                      .4                    a-   /1     2j'.2'Ov'r E3A-16
DI/Up Scaw Boom Pivot UpwerLimut le 13522 18522 U Limit 3662 3600 Dansducer Size: 1.00 Incenezmt:
 
Boom Rotat Increment bfteal 54 DCi 3 Codeof Ovefltp: 10 Moie- Allomatic Scan Conesonunts 100 ConvmwfiopCounts 100 NucnbcrofSans-20 Sean Motion: Bi-directional CoawnionUnits Dege Conversion Units Degres HeW R osNitin: 0.00 Correction.
ISwT Examination Summary Record Pnreect No:                                         Sft:                                                             l       ry Shet No.:
Dd~iut wi'ln. 8E 19 Aadhiswln
388                                                 Watts Bar Nuclear Plant Unit 1                                     300034 Examinlaton Area: Reactor Pressure Vesrel Lne/Assembly:     Lower Head Meddional Weld W2D                       0 Identification:   Lower Head at 180-degrees                           T N.e         P... e                                   R     E           Resoluln CNF AUT     Is3r-eeAvuTrIO         11,12         AUMo                                   AUTOkwlrmese rneeeswemer, s      ory.
_ 8.19 Hoist(Pivoft Paio): 324.05 MotticParamsefra:
CN2               12       AUISLIC40 X           VM                 EvwnellonnftbduetoetefvbandppolkWand                 0O 12 t1 AUT55 AUT SUC4OT X
07A Cal 13 Cal.brot'--t-ocards IExamiotnationNoter.
X VM VM e Iwshead penetr CD o,
Status Angle Dbection Scan Ultset atepb ftoet weIc- d: s la .---ato --ot-e Channel I On 55 (-) -1.40(i() 1.3 3 C _ 0301301 instrumofltationkrse._
C 1   .       A  . X   l-     1dM CD 12o4to PvVredmy:                                                         .n>~swnemy                   ftge                    j          No-IwOF1 2aO                 300)034           _i IEn
tlhnoel2 On 55 _ -_ .40(l _ -1.ft 0801302 Channel 3 On SLif' 40 (-) -2.00(in) + 1.72(n) 030130 Channel 4 On SLIC 40 () + 2.00(in) + 1.7 2 (in) 0801304 Examination Remarks: channel 5 On 01. (+) + 0.00(u) + I.72(in) 0801305 Limited examination due to the proximity oftihet core barrel Charnel 6 Off N/A N/A N/A N/A N/A anti-rotation IUgS tmd the lower head instnrurnuetion tabes.7besel7 Off hVA N/A 2/A N/A N/A Channel S Off N/A N/A N/A NtA N/A Increment  
 
&Scna Pssitionse Actual Recordable lidiecalna r AnalRytarks ScanNo(5) posit Pion Sci Posi'tion Yes No NIA Atachmen__
                                                                            ,1lI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMNATION RECORD SitePlnt: Watts Bar                                           Weld IdenUflatiod: RPV-W02-D                     _   Pr/o11tesCaCK:             lSwvr-PDl-AUTrfl/tOl&2           ExamlhstlinNo:               ll ProJeetNw 04-036<                                             Wel               lcripton:
Stoat S Start Stop Chtamdl I D 0 33 Yes ' No 1 -20 17494 18527 1478 3602 Channel2 G] P FtxlterEvsluto ion___ __ __ __ __ __ __ _Channel 3 Q Q Required:
LswdiMcdionsal8 D evkeCaiiratb                         WAT-WALCON-0 01 Mod.Ceaf: 07A                                                 ScanPathDrawiny SMclid                                       EDe               j Examination Time-                       Srfe     Temn~ot]re Date AcqjisitionOperator(s)/SNTLevel: CarlosALBarrera ilfl                                                               ltMo       2005           Rt.t rt         lia               stdrt           i 1552             1601               79                     1 Stan Contrafler Parameten             Increment Axis               Planned                     Actual       Scan Axls             Planned         l     Actual                 Positional Parameters Controller.                 PaR             LowerLimit                       17496                   17496         LowerLinit                1160               14S0         Bem Direction:                   DI/Up Scaw                   Boom Pivot           UpwerLimut   le                 13522                     18522       U       Limit               3662               3600         Dansducer Size:                     1.00 Incenezmt:             Boom Rotat           Increment bfteal                 54                                     DCi                       3                               CodeofOvefltp:                       10 Moie-                 Allomatic Scan         Conesonunts                     100                                   ConvmwfiopCounts           100                             NucnbcrofSans-                       20 Sean Motion:           Bi-directional         CoawnionUnits                   Dege                                   Conversion Units           Degres                           HeW   R     osNitin:             0.00 Correction.               Dd~iut             wi'ln.                         8E 19                                 Aadhiswln         _         8.19                           Hoist(Pivoft Paio):               324.05 MotticParamsefra:               07A           Cal 13                                                               Cal.brot'--t-ocards IExamiotnationNoter.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Ci__lunnde c4 _ ' El I D Yes 0 No__ Chtannc15
Status         Angle       Dbection           Scan Ultset                   ftoet                 atepbweIc- s d:. la               ato    ot-e                              --- --
[ O 0 AeoiveTarte/CV No.:__.__ _.__ __..Channel6 I A_______________
33 Channel I           On             55           (-)               - 1.40(i()             1. C       _                     0301301           instrumofltationkrse._
_ _ __ Channel 7 G O 2 ufalsb Tapc/CD No.:___Chanl nlS 0 0 13 N/A __Analyst I SN T Level I Date. //1swFOR14 //5 777 "a)sS e Ei 8 0 , -CD/S 0 0~CD )
tlhnoel2           On             55     _            _   -           .40(l     _-     1.ft                             0801302                                                                                     Ei  8    0 Channel 3           On         SLif' 40         (-)               - 2.00(in)         + 1.72(n)                         030130 2                    72 Channel 4           On         SLIC 40           ()                 + .00(in)           + 1. (in)                         0801304           Examination Remarks:
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-18 Attachments Exam Number exam 11 watts Bar Unit 1 RPV-W02-D LWR Ed Meridional e 180 Deg Page 1 of 2 Cursor Box 1 of 1 Scan Axis Inc. Axig Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis 17.77 -18.70 179.48 -184.34 2.29 -2.94 Channel 1 180.42 -185.27 20.69 -21.62 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and S.Channel 2 180.42 -185.27 14.84 -1b.77 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 3 178.25 -183.07 20.27 -21.20 Channel 4 178.25 -183.07 15.26 -16.19 Module Coordinates Inc. Axis Scan Axis Channel 5 178.25 -183.07 17.78 -18.71.ZYZ? / H0 -E3A-19 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitePlantt Watts Br Webld dentlfeaItion RPV W02-D PriRevituICN:
channel 5           On             01.           (+)               + 0.00(u)           + I.72(in)
ISwT-PDI-AUTI/0/OI&2a 12 ProjnetlhN 04-436 WeldDeseriptlee.
Charnel 6           Off           N/A           N/A                     N/A               N/A 0801305 N/A Limited examination dueto the proximity oftihetcore barrel anti-rotation IUgS tmd the lower head instnrurnuetion tabes.
Lwr dMcridional 18 Device.Conftistow WAT-WALCON-0001 M[Cea 07B Scn palt Drawin SPMrimd Exam Date Exarnin Time Surface Tern pratar IF Data Acquisition Operator (a) I SNT Lewd: David EL Jaeinjia /111 IO Marih 2005 Start E1d Start End 31720 I1733 78 78 Sean Controller Parnsdter Increment Axis Planned -Actual Scam Axis planoed Actual Positiool Parameters Controller PaR Lver Limit 1160 1538 Lower Limit 16916 16998 Seanm Direction:
7besel7 Off             hVA           N/A                     2/A             N/A                                 N/A CD)
Cw/Ccw Scan Boom Rioate Upper Limit 3698 369 Upper Limit 19014 19005 Transducer Size: 1.00 inurement Boom Pivot kK=ent hfteva 54 DCl 3 Code % ofOverlap:
CD/S0  0~
I0 Mode: AtwomatieScan Conversion Courta 100 Conversion Counts 100 Number of Scans: 42 Scan MotioiL Bl-directionad Convesion Urnis DegreCe Convcrvion Units Dore Head Rowae Poskion: 90.00 Correction:
Channel S           Off           N/A             N/A                     N/A             NtA                                 N/A Increment &Scna PssitionseActual                                    Recordable lidiecalna         r                                         AnalRytarks ScanNo(5)                   posit Pion                 Sci Posi'tion                       Yes       No     NIA Atachmen__
Default Radius in. S8.19 EDAS Radiuso In 2.19 Hoist (Pivot Point): 3U.05 Medal. Paraonetern:
Stoat         S               Start         Stop         Chtamdl I D             33        0           Yes ' No 1 -20         17494         18527           1478           3602         Channel2 G]             P             FtxlterEvslutoion
070 Cal 13 Calibration Picrdas jExamnation Notes:_ tgh.. A.aai. fle .R.R Offst St.. offe t WAI a Chedc( for limItations due to the Droxnmltv of the lowerhead CharaelI on 55 (4) +1.40Cn) -1.35(in) 0801301 lnstrumentation tubes.amC utal 2 On 55 -1.40i) -1.35fin 0801302 Chaimel 3 (n SLIC 40 4 +2.00(in +1.72(in) 0801303 Channel 4 On SLIC4 4 --2.00(in) .1.72(in) 0801304 Exanmiaslon Remaerk: Channel5 On 0L +) +0.00finl  
___ ______    __   __     __         _Channel                   3 Q                     Q Required:                     _    _   _   _     _   _   _   _   _   _   _     _ _ _     _   _
+1.72(inl 0801305 Liomitedexaninaticndutothe proxiityoftheoreebarrel Channel 6 Off NlA N/A NfA NA NWA and-rotauon lugs and rhe lower henad inostrumnaotin tubes.Chanoel 7 Off N/A M/A N1A N/A N/A Chanel I Off N/A NtA NA N/A NMA Increment  
Ci__lunnde    c4 _       '       El I     D Yes 0 No
& Sean Psitions Actual Recordable Indlcstla
__                                Chtannc15 [             O         0 AeoiveTarte/CV No.:
__ _ Anays Eeafat Scan No.(s) Insnt Position Servo Positn Yes No NTA Attaonent!
_.__           __..Channel6                                                                                   I A_______________                                     _ _ _
Start Stop Start Stop Channl I0 0 0 Yea 5 No.-42 1532 3692 169S6 19014 rnnel 2 0 0 lFurtherEvlunttion Channel3 3 E 0 Required!Cl___d 4 a C a o Yes 0 No Channel s 0a 0 A AEi hive Tape/CD No.:..Channel 60 G O 2 A/R Channel7 0i O 1 Analyis Tape/CD No.: Cht/nel 8 a lad N/a nslyqtb~ I N/ee ae!9 0 = 1- / / Hfe ;z@oos CD P.'ew e soa sI. UTsa ta... ol Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)hiservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number 12 Watts Bar Unit 1 RPV-Wo2-D LWR HD Meridional S 180 Deg Page 1 ofl I Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Module Coordinates Inc. Axis Scan AXis 174.13 -175.06 14.67 -19.53 2.29 -2.94 Channel i 26.17 -31.01 171.21 -172.14 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 26.17 -31.01 177.06 -177.99 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 3 171.63 -172.56 Channel 4 176.64 -177.57 Module Coordinates Inc. Axis Scan Axis Channel 5 174.12 -175.05/ N""f 70OPj -E3A-21 ISwT Examination Summary Record Proje No: l te: ISulary Sh.ee N.: 3sr Watts Bar Nuclear Plant Unit 1 300011 Examinaon Area: Reador PressuNSVend UneAfssaeblyj:
_              Channel 7     G         O         2       ufalsbTapc/CD   No.:
Lower Head Merldiornl Weld W2E o IdentIfication:
___ChanlnlS    0         0         13             N/A             __
Lower Head at 240-degrees T N H N ProcedurE exm it e Resoludon COr KReiCthqACN Numbe I E-m IAe +/- R Anahz Record NM Remoft AUT LSwT.PDOIATIIMWo 13,14 Aro .-AUTO for #**oe menurernnt ody.ICN 2 14 AUISUC40 X vU Exodvtnh dte de N Ore co baerl snpod 3ugs mt 14 AUTSS X -VIA terluweh-d p _V 13 AUT SCICT X _ VM iS AUTr5T X -VIN Pr.pared 1/.r Dam O:S ry Ho,~ 12-Mar-06 I OI o 1300011 02 l \-)
Analyst I SN T Level I Date.           //
_, D-IEII SOUTHWEST TECH1NOLOGIES UAUTOMATED ULTRASONIC EXAMINATION RECORD Sie/flat:
1swFOR14 "a)sS                              //5                 777                             e
WtisBar MeldIdeatillention:
 
RPV-W02-E  
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
-ra/Re'tlCftch
Inservice Inspection Program Request for Relief I-ISI-18 Attachments Exam Number exam 11                                                 Page 1 of 2 watts Bar Unit 1 RPV-W02-D LWR Ed Meridional   e 180 Deg Cursor Box 1 of 1 Scan Axis                           17.77 - 18.70 Inc. Axig                        179.48 - 184.34 Depth In  Material                    2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                        180.42 - 185.27 Scan Axis                          20.69 - 21.62 Channel 1 Feature Analysis                          Summary Comments No Recordable Indications channels 1, 2, 3, 4, and S.
: ISvwT-PD1-AUTI/0/0/t&2 Examinatioao.:
Channel 2 Module Coordinates Inc. Axis                        180.42 - 185.27 Scan Axis                            14.84 -   1b.77 Channel 3 Module Coordinates Inc. Axis                         178.25 - 183.07 Scan Axis                            20.27 - 21.20 Channel 4 Module Coordinates Inc. Axis                        178.25 - 183.07 Scan Axis                          15.26 - 16.19 Channel 5 Module Coordinates Inc. Axis                         178.25     - 183.07 Scan Axis                          17.78     - 18.71
13 rrject No.: 04-0368 lWeldDesription:
                                      .ZYZ?   /     H0         -
LwrHdMcidnrncam 24 DeviceCemflguration:
E3A-19
WAT-WALCON-000
 
_____ntin
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitePlantt Watts Br                                         Webld dentlfeaItion RPV W02-D                     PriRevituICN:           ISwT-PDI-AUTI/0/OI&2a                                     12 ProjnetlhN       04-436                                     WeldDeseriptlee. Lwr dMcridional               18 Device.Conftistow WAT-WALCON-0001 M[Cea           07B                                         Scn palt Drawin SPMrimd                                 Exam Date             Exarnin Time                   Surface Tern pratar IF Data Acquisition Operator (a)I SNT Lewd: David ELJaeinjia /111                                                       IO Marih 2005         Start         E1d             Start               End 31720         I1733               78                 78 CD P.
_____13 Mod.C u&#xa3; 07A IIc!?ax rte Drn~arbE SPCend !Exambte _ ExainSation e Tim Sarflle l'e pendtur'F Date Acquia~iteo&0M*We(s)fSiNT1,ave:
Sean Controller Parnsdter               Increment Axis             Planned             -     Actual     Scam Axis             planoed           Actual               Positiool Parameters Controller                     PaR           Lver Limit                   1160                   1538         Lower Limit             16916           16998       SeanmDirection:               Cw/Ccw Scan                     Boom Rioate         Upper Limit                 3698                   369         Upper Limit             19014           19005       Transducer Size:                   1.00 inurement                 Boom Pivot         kK=ent     hfteva           54                                   DCl                     3                           Code % ofOverlap:                   I0 Mode:                   AtwomatieScan         Conversion Courta             100                                 Conversion Counts       100                         Number of Scans:                     42 Scan MotioiL             Bl-directionad     Convesion Urnis             DegreCe                             Convcrvion Units       Dore                         Head RowaePoskion:               90.00 Correction:                 Default         Radius in.                   S8.19                               EDAS Radiuso   In         2.19                       Hoist (Pivot Point):             3U.05 Medal. Paraonetern:                     070       Cal 13                                                         Calibration Picrdas jExamnation Notes:
C~rl*"M.Bmrnra/lil 10 March 200 l Start i End Start LaEd atAcutlaprtr)I Tav8CrnMIarr/NI 1537 2544 78 '7 8 Sca Controller  
_         tgh..           A.aai. fle .             R.ROffst          St.. offe t                         WAI a           Chedc( for limItations due to the Droxnmltv of the lowerhead CharaelI               on               55       (4)             +1.40Cn)         - 1.35(in)                         0801301         lnstrumentation tubes.
=rmelern Inerement Ahls Planned iA_ tual sean Ai _ _ anned Atnal ostiaenaJParameters Controller.
amC utal 2             On               55                         - 1.40i)         -   1.35fin                       0801302 Chaimel 3             (n             SLIC 40       4               +2.00(in         +1.72(in)                         0801303 Channel 4             On             SLIC44        -             - 2.00(in)         . 1.72(in)                       0801304       Exanmiaslon Remaerk:
PAR Lower imt 23496 3496 LowerLinmit 1160 14i0 BeamnDirection:
Channel5               On               0L         +)             +0.00finl         +1.72(inl                         0801305         Liomitedexaninaticndutothe proxiityoftheoreebarrel Channel 6             Off             NlA       N/A                   NfA             NA                               NWA           and-rotauon lugs and rhe lower henad inostrumnaotin tubes.
DnRUp Scan: Boom Pivot upper Uit 24522 [24522 Upper Limit 3662 3000 -rannnhdeer Size: .oo ineI-n. Boo Reim Inreet Intrva 54 DC( 3 Ccde a6 f terlVp. 10 Mode: Automatic Scan ConvemsionCeuats 100 Conversion Counts 100 NumberodScan, 20 SeanMotion:
Chanoel 7             Off             N/A       M/A                   N1A             N/A                             N/A Chanel I             Off             N/A       NtA                   NA               N/A                             NMA Increment & Sean Psitions Actual                               Recordable Indlcstla           __           _                     Anays Eeafat Scan No.(s)       Insnt         Position         ServoPositn                        Yes     No       NTA Attaonent!
Ui-directional CenyusionUaits Degrees Conversion Units Degrei ReadRotakePonitle:
Start             Stop       Start         Stop     Channl I0                       0         0 Yea5        No
0.00 Co ne Dcfult RaduuLo. U8.19 Radias In. 88.19 (Poino(rivotPoint) 324.05 ModulePaaeter:
        .-42         1532             3692       169S6         19014     rnnel   2 0                   0   lFurtherEvlunttion Channel33              E       0   Required!
07A Cal 13 Calibration Records: IExunthastionNoles:-atii AMt Dif fe _. ao- n 0.t a ".^. : Ch-t fc -.; .. .. .. - ..d. , _ r -. -Channeln I On 55 ) -1.4in) 1.35(in) 0101301 instrumentation tubes.Channei2 _On , 55 -1+L + J.4in ) 1.35[in) 001302 Chacnel 3 On SIC40 t-l -2.00(in) +1.72(in) 0801303 Channel 4 On SLIC 40 (+) + 2.00(in) 1.7Z(ml 0801304 Examination Ranarkas: Channel5 <)n OL (+ +0.00(in)  
C Cl___d   4 a                   a0        o   Yes       No Channel s 0a           0       A     AEi hive Tape/CD No.:
+1.72(;D 0801305 Limited umnlnadsonduetodeproxlimiyoftheoxebarrel Channel 6 Off N/A N/A N/A N/A NMA tati-rotation 11g1 and tFz lover head instrioation tube&Channel 7 Off N/A N/A WA N/A NMA CirnelS otr N/A N/A NA IVA Nl/A _Increment
                        .                                                 . Channel 60 G           O                     2 A/R Channel7       0i     O       1   Analyis Tape/CD No.:
& Sean Positimns Aetual Rcrddabl Indicatlon Ansalyst Remarks Scan No(s) Inereta Position Scan [onition Yes No N/A  
Cht/nel 8             a       lad           N/a nslyqtb~
N/ee       I    ae!9             0         =         1-           /   / Hfe       ;z@oos
'ew e soa sI. UTsa ta...       ol
 
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME) hiservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number 12                                                   Page 1 oflI Watts Bar Unit 1 RPV-Wo2-D LWR HD Meridional S 180 Deg Cursor Box 1 of 1 Scan Axis                       174.13 -    175.06 Inc. Axis                       14.67 -   19.53 Depth In Material                2.29 -   2.94 Channel i Module Coordinates Inc. Axis                        26.17 - 31.01 Scan Axis                      171.21 - 172.14 Channel 1 Feature Analysis                        Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                        26.17 -   31.01 Scan AXis                      177.06 -     177.99 Channel 3 Module Coordinates Inc. Axis Scan Axis                     171.63 -     172.56 Channel 4 Module Coordinates Inc. Axis Scan Axis                      176.64 - 177.57 Channel 5 Module Coordinates Inc. Axis Scan Axis                     174.12 - 175.05
                                              /   N""f 70OPj -
E3A-21
 
ISwT Examination Summary Record Proje   No:                                             l te:                                                             ISulary   Sh.ee N.:
3sr                                                       Watts Bar Nuclear Plant Unit 1                                     300011 Examinaon Area:     Reador PressuNSVend UneAfssaeblyj:       Lower Head Merldiornl Weld W2E                       o IdentIfication:     Lower Head at 240-degrees                           T N   H N             ProcedurE           exm                   it e             Resoludon COr KReiCthqACN         Numbe   I     E-m       +/-IAe R   Anahz     Record   NM               Remoft AUT       LSwT.PDOIATIIMWo       13,14         Aro     .   -                           AUTOfor #**oe menurernntody.
ICN 2             14         AUISUC40 X         vU                   Exodvtnh   dtede N Oreco baerl snpod 3ugs mt 14           AUTSS   X   -     VIA                 terluweh-d p     _V 13       AUTSCICT    X   _     VM iS           AUTr5T X   -     VIN 02 Pr.pared       1/.r                                                 Dam                                 O:S                       ry Ho,
                            ~                                       12-Mar-06                         I OI o                   1300011 l       \-)
 
_, D-IEII                                                               SOUTHWEST TECH1NOLOGIES UAUTOMATED ULTRASONIC EXAMINATION RECORD Sie/flat:       WtisBar                                       MeldIdeatillention: RPV-W02-E                   -     ra/Re'tlCftch     :       ISvwT-PD1-AUTI/0/0/t&2           Examinatioao.:                   13 rrject No.: 04-0368                                           lWeldDesription:         LwrHdMcidnrncam         24 DeviceCemflguration:         WAT-WALCON-000                   _____ntin                 _____13 Mod.C u&#xa3;         07A                                           IIc!?axrte Drn~arbE SPCend                                   !Exambte       _               e ExainSation     Tim               Sarflle l'e     pendtur'F Date Acquia~iteo&0M*We(s)fSiNT1,ave: C~rl*"M.Bmrnra/lil                                                                   10 March 200         l     Start   i       End             Start                   LaEd Tav8CrnMIarr/NI atAcutlaprtr)I                                                                                                   1537           2544                 78           '7     8 t
Sca Controller =rmelern                 Inerement Ahls               Planned               iA_     tual     sean Ai       _ _         anned             Atnal                   ostiaenaJParameters Controller.                 PAR             Lower imt                       23496                     3496       LowerLinmit                 1160               14i0       BeamnDirection:                     DnRUp Scan:                     Boom Pivot           upper Uit                       24522                 [24522           Upper Limit                 3662               3000     -rannnhdeer       Size:                   .oo ineI-n.                 Boo Reim             Inreet       Intrva           54                                     DC(                         3                             Ccde a6 f terlVp.                       10 Mode:                   Automatic Scan       ConvemsionCeuats                 100                                   Conversion Counts           100                           NumberodScan,                           20 SeanMotion:             Ui-directional       CenyusionUaits                 Degrees                               Conversion Units           Degrei                         ReadRotakePonitle:                     0.00 Co     ne                   Dcfult             RaduuLo.                       U8.19                                 Radias In.                 88.19                               (Poino(rivotPoint)             324.05 ModulePaaeter:                       07A           Cal 13                                                             Calibration Records: IExunthastionNoles:                                                             En      0An Bo*a AMt    -atiiDif fe         _.       ao-n 0.t           a     ".^.                                         Ch-t fc..  ..     :  ..             ..     ,-.d. ; _   r-.     -
ChannelnI              On             55               )               - 1.4in)             1.35(in)                           0101301           instrumentation tubes.
Channei2       _On             ,     55 -         1+L                 + J.4in )           1.35[in)                           001302                                                                                             0 Chacnel 3             On         SIC40           t-l                 - 2.00(in)       +1.72(in)                           0801303 Channel 4             On         SLIC 40           (+)               + 2.00(in)           1.7Z(ml                           0801304           Examination Ranarkas:
Channel5               <)n           OL             (+                 +0.00(in)         +1.72(;D                             0801305             Limited umnlnadsonduetodeproxlimiyoftheoxebarrel Channel 6             Off           N/A             N/A                     N/A             N/A                                 NMA               tati-rotation 11g1and tFz lover head instrioation tube&                 CD, 0 Channel 7             Off           N/A             N/A                     WA             N/A                                 NMA CirnelS               otr           N/A             N/A                     NA IVA                                                 Nl/A                                                                                     _  -Cr9 Increment & Sean Positimns Aetual                                 Rcrddabl Indicatlon                                                         Ansalyst Remarks Scan No(s)
Inereta Sta Position Stop Scan [onition Start          Stop      Chauc 10 0 Yes       No E-N/A  


==Attachment:==
==Attachment:==


.Sta Stop Start Stop Chauc 10 0 E- 0 O Yes No I -20 23495 2452t 14U1 2999 Charmed2 U RF U Further Evaluatica Channel 3 0 0 Required:_. Cneh el 4 0 El 0 EYcs E No_ __ _ u~L!elS 0 3 _ Arlive TapeXCD o.: 4.__ afnelS6 0 0 01 I A/IR of_ C 7 0 n 2 Als'nis T 9 e,,CD No.: D _ _ elo 0 C El NiA Analyat ISNT Le'el / Date: nw6iar urn tst2rrouti rrrss tiiS t E n Bo*a 0 An 0 CD, 0-Cr9 rj3C Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number exam 13 Watts Bar Unit 1 RPV-W02-E LWR Id Meridional 0 240 Deg Page l of I to Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis 14.71 -15.64 239.48 -244.34 2.29 -2.94 Channel 1 240.43 -245.27 17.63 -18.56 Channel I Sunmary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 240.43 -245.27 11.78 -12.71 Module Inc.Scan Coordinates Axis Axis Channel 3 238.26 -243.08 17.21 -18.14 Channel 4 238.26 -243.08 12.20 -13.13 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 5 238.26 -243.08 14.72 -15.65 tl, keys 4.e&'1 2ZT/0 .',vt zovj-E3A-24 IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD.sI#.nss..  
0         O Yes         No                                                                                       rj3C I -20           23495         2452t             14U1           2999       Charmed2 U             RF       U Further Evaluatica Channel 3 0                     0     Required:
.or.n. R V-.-I 'rW.'1'4 D M-4-V-6-11-e..tnn WAT-WATCOn.000 14 P-4 Mt. .* (" nelv 1< 24U I I -w ------ -___ __Mnd lC9t A-Ik -.H fl.-! VPkd.AA V-sn. n.te L I Data Acquisition Operator (s) I SNT Level: David IL Kl~einjos  
_.                                       Cneh el4 0             El         0       EYcs E No
/ R Scan Coatroller Parameters Controller:
_                      __               _     u~L!elS 0                 3         _ Arlive TapeXCD o.:
PaR Scan: Doom Rotate Incement Boom PiVot mode: Autranatic Sca Scan Motion: Si-dircetional Cr--!n Dehit lacrewneat As Plfuned _ Actual Lower Limit 1160 l 153S JPPe1 Limit 3698 1 3701 l0Maxdx 2005 Scas Ais Lower lint DCI Conversion Cauns Convcrsionn Uits P.MAt,. T.1739 M I.ianUed I Actal k==Ct bervel Conversion counts Conversion Uimts Start* Time Surfce Temperature'l End I tat IJ Fad 175 07 54 100 Decrees tt IQ 3 100 Drgrecs 81.19 oslitienol Puraceters Beam Direction:
4.__                                             afnelS6 0             0         01             I A/IR C     of_7 0           n         2 Als'nis T 9e,,CD No.:
Cwv/Cc Transducer Size 1.00 Code % ofOverlep:
_           _                       Delo          0 C         El             NiA Analyat ISNT Le'el/ Date:
I1 Number of SaS 4R Head Rout. rt'ssito 90.0D Hoist (Pivot Point): 324.05 Module Parameters:
nw6iar                                         urn tst2rrouti rrrss tiiS
07B Cal 13 Calmbatie.
 
R;odw Status Asile Direction Scan Offset Step Offset I WAT-13 tic f I is due to the proximity of the lower head rmel I On 55 (^) + I.40(tn) -1.35(i) 0801301 instrumentaliontubes.
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME) inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number exam 13                                             Page l of I to Watts Bar Unit 1 RPV-W02-E LWR Id Meridional 0 240 Deg Cursor Box 1 of 1 Scan Axis                       14.71 - 15.64 Inc. Axis                      239.48 - 244.34 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                      240.43 -     245.27 Scan Axis                        17.63 -   18.56 Channel I Feature Analysis                        Sunmary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Cbunnd 2 On 55 (-) -1.40m) -1.35(in) 0RD1302 mnaue 1 3 On SUC40 (+3 +2.00(ir)  
Channel 2 Module Coordinates Inc. Axis                      240.43 - 245.27 Scan Axis                        11.78 - 12.71 Channel 3 Module Coordinates Inc. Axis                       238.26 - 243.08 Scan Axis                        17.21 - 18.14 Channel 4 Module Coordinates Inc. Axis                      238.26 - 243.08 Scan Axis                        12.20 - 13.13 Channel 5 Module Coordinates Inc. Axis                       238.26 - 243.08 Scan Axis                        14.72 - 15.65 tl, keys           4.e&'1   2ZT       /0 .',vt   zovj-E3A-24
+ L72(in) 0t01303 Channd 4 On SLIC 40 (-) -2.00(im)  
 
+ 1.72(in) 0801304 Ersnmmatls Remnerits:
IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD
zhewuel S On OL (-I + 0.0(i) 41 .72(in) 0801305 limited cxsmination due to the proxiniity ofthe cre banred Cannwl 6 Off N/A IC/A NA N/A N/A anti-rotation luxp and the lower head instrunentation tubea.Channel 7 Off N/A IVA N/A N/A NIA ChannSel Off 'WA NC/A NJA NMA N/A lucrmeraot  
.sI#.nss..     . or.n. R V
& San Positios Actual Recerdable Ildications
P-4        Mt.
_Any R*marks Scan No (s) Inorermcnt Position Scma Praitiom Yes No NVA Alttchment:
("                                        rW.'1'4 ID'                                          1< 24U I    M-4-V-6-11-e..tnn       WAT-WATCOn.000 14 nelv I       - w       ------     -                 ___     __
____ Slasi Stop Start St Csa l 03 a a Yea la NO 8-37 1538 3101 22986 25014 Chtnnel2 0 fd 0 artther altutin 38-48 _ 3158 _701 23568 25014 isnneJ O Ela E Required: Chn_ CDel 4 O [a 0 &deg; Yes2 1 No Ihal _a_ Cbdn a o Archive Tspc/CD) 1o.:_lmel6 0 0 la 2A/B: :- Channel 7 0 -l Anlysis Tape/CD No.: t__ Channelt S Q A N/A a o Analyst / SNTI evel /Datt ,; I{6 ///INws,*2&4e?)J' CD M 0 r0 CD CD4 uwtsron".
* Time 17507 Mnd lC9t           A-                                         Ik       -.H fl.-!         VPkd.AA                                 V-sn. n.te                                               Surfce Temperature'l L                           I Data Acquisition Operator (s) I SNT Level: David IL Kl~einjos / R                                                                                         Start          End      I        tat          IJ    Fad l0Maxdx 2005 CD 1739      I Scan Coatroller Parameters               lacrewneat As                 Plfuned             _       Actual         Scas Ais M
ur5s tv-9.5smr Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-4SI-18 Attachments Exam Number 14 Page 1 of. I Watts Bar Unit 1 ZPV-W02-9 LWR ED Meridional  
                                                                                                                                                      .ianUed I         Actal                 oslitienol Puraceters Controller:                        PaR          Lower Limit                      1160                l    153S            Lower lint                                                Beam Direction:               Cwv/Cc Scan:                        Doom Rotate        JPPe1 Limit                    3698                1    3701                                                                        Transducer Size                   1.00 Incement                        Boom PiVot      k==Ct bervel                    54                                        DCI                        3                              Code % ofOverlep:                   I1 mode:                      Autranatic Sca      Conversion counts                100                                      Conversion Cauns            100                            Number of SaS                       4R ScanMotion:                  Si-dircetional    Conversion Uimts                Decrees                                  Convcrsionn    Uits        Drgrecs                        HeadRout. rt'ssito               90.0D Cr--!n                          Dehit                                          tt IQ                                    P.MAt,. T.                  81.19                          Hoist (Pivot Point):           324.05 Module Parameters:                         07B     Cal 13                                                                   Calmbatie. R;odw                     tic Status         Asile   Direction         Scan Offset           Step Offset                   I         WAT-13                         If      is due to the proximity of the lower head rmel I                 On             55       (^)               + I.40(tn)           - 1.35(i)                               0801301           instrumentaliontubes.
@ 240 Deq Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis 234.13 -235.06 14.67 -19.53 2.29 -2.94 Channel 1 26.18 -31.01 231.21 -232.14 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 26.18 -31.01 237.06 -237.99 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 3 231.63 -232.56 Channel 4 236.64 -237.57 Module Coordinates Inc. Axis Scan Axis Channel 5 234.12 -235.05 1CgA.C M// ",gg zooj-E3A-26 ISwT Examination Summary Record PMI.c d : 368 ,3e Watts Bar Nuwiear Plant Unk 1 30 at M.: 13300012 Examinnion Aea: UnelAssemblr:
Cbunnd 2                 On             55       (-)               - 1.40m)             - 1.35(in)                             0RD1302                                                                                 0M 1
mnaue 3             On           SUC40       (+3               +2.00(ir)             + L72(in)                               0t01303 Channd 4                 On           SLIC 40     (-)               -2.00(im)             + 1.72(in)                             0801304           Ersnmmatls Remnerits:
zhewuel S               On               OL       (-I               + 0.0(i)             41 .72(in)                             0801305             limited cxsmination due to the proxiniity ofthe cre banred Cannwl 6                 Off           N/A       IC/A                     NA               N/A                                     N/A             anti-rotation luxp and the lower head instrunentation tubea.           r0  CD Channel 7                 Off           N/A         IVA                   N/A               N/A                                     NIA ChannSel                 Off           'WA       NC/A                   NJA               NMA                                     N/A CD4 lucrmeraot & San Positios Actual                                 Recerdable Ildications               _Any                                             R*marks Scan No (s)             InorermcntPosition            ScmaPraitiom                          Yes       No       NVA Alttchment:
____       Slasi           Stop       Start         St           Csa     l     03                   a           a   Yea la NO 8-37               1538           3101     22986         25014           Chtnnel2     0         fd         0 artther         altutin 38-48         _ 3158             _701       23568         25014             isnneJ O               Ela     E     Required:
CDel Chn_     4 O           [a         0           &deg;   Yes2 1   No Ihal
_a_                             Cbdn         a         o                 Archive Tspc/CD)1o.:
_lmel6         0           0       la                 2A/B
: :-                                                   Channel 7     0                 -l       Anlysis Tape/CD No.:
t__                 ChanneltS              aQ        oA                  N/A Analyst/ SNTI evel/Datt                     ,;                                       I
{6 ///INws,*2&4e?)J' uwtsron".         ur5s tv-9.5smr
 
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-4SI-18 Attachments Exam Number 14                                                   Page 1 of. I Watts Bar Unit 1 ZPV-W02-9 LWR ED Meridional @ 240 Deq Cursor Box 1 of 1 Scan Axis                       234.13 - 235.06 Inc. Axis                        14.67 - 19.53 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                        26.18 - 31.01 Scan Axis                        231.21 - 232.14 Channel 1 Feature Analysis                        Summary Comments No Recordable Indications   channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                          26.18 - 31.01 Scan Axis                        237.06 - 237.99 Channel 3 Module Coordinates Inc. Axis Scan Axis                       231.63 - 232.56 Channel 4 Module Coordinates Inc. Axis Scan Axis                        236.64 - 237.57 Channel 5 Module Coordinates Inc. Axis Scan Axis                       234.12   - 235.05 1CgA.C M       // ",gg zooj-E3A-26
 
ISwT Examination Summary Record PMI.c d   :                                         ,3e                                                                 30    at M.:
368                                                Watts Bar Nuwiear Plant Unk 1                                   13300012 Examinnion Aea:   Reactor PressureVessel UnelAssemblr:
Identification:
Identification:
NDE AUW Reactor PressureVessel Lower Head Meridlonal Weld W2F Lower Head at 300degrees 0 T Pmcdue Ere R E RfJChaCN NAseedy) Exm An L.. a An etr l Recor Alilb CNF lSwT4-DIAUT/OO Sler AMO .ICN 2 1i AUTSUC49 X -VM 15 la AUTS5 X -VM IS AuT LuC4r x -Vl 15 AUrT55T X -VM AUIO tor0sthdess eesrv tny.Exrrabw lruWbod due e s bre suppoatbges ard be bvr head peraaoft t 9 .CA -C' fi CD A, oat,: Pagm: iiu e ry No: 12-Mar-05 I OF1 300C12 , I U tMI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitvdtat:
NDE Lower Head Meridlonal Weld W2F Lower Head at 300degrees Pmcdue             Ere                 R T
WattBar Wed Mdcg olw RPV-W02-F PrelvtChgltCN:
0 E
ISwT-PDI-AUTI/Cj0/1&2 Examination  
Alilb An    etrl Recor CNF t
?. 15 roject No.: 04-0368 WddDeaerptims:
RfJChaCN         NAseedy)     Exm An     L.. a AUW      lSwT4-DIAUT/OO         Sler       AMO     .                            AUIO tor0sthdess eesrv tny.
Lva HdMridional 3 Devicetufizrratie.:
ICN2              1i       AUTSUC49 X     -   VM                 Exrrabw lruWbod due  e s bre  suppoatbgesard 15 la       AUTS5   X     -   VM                 be bvr head peraaoft IS       AuT LuC4r x     -   Vl 15         AUrT55T X     -   VM 9.
WAT-WALCON0001__
CD  A, CA-   C
Mad-CatE 07A S" rPath rswla .SPMeeid Exam Date Aariatiinas Tiem Surfe.Temprratr, F Data AcquhitdiOeOrator (s)1Si Lefel: Carle stBarrera/m I il0M 20QU Strt I a =1507 152J 7S 1 78 Sesa Contr.iler araoaetaers .etAtild = h Actual scao Axi Pletaed Actuad Positionall Paranetas Controler PAr LowuerLinit 294 29496 LowerLimit 1160 14t0 Bam Direction:
                                                                                                                                            '     fi oat,:                           Pagm:               iiu e ryNo:
Dn/Up Scan: Boom Piovt Uparlimit 30522 upLimit 3662 3000 1ansduccrSize:
12-Mar-05                     I OF1                 300C12
1.00 Inerenent Boom Rotateb Inremi Interval 54 CodeofOeertap:
                , I U
I0 Mcder Automatic Scan CORTvrMn, Counts 100 Converion Counus 10t0 Number offScans.
 
20 Scan Motion: Bi-directional Convaseion Units Degrees CoDversion UtniLt Netrees Head ttotate Prticow: O00 Couection:
tMI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitvdtat:     WattBar                                 Wed Mdcg           olw RPV-W02-F                 PrelvtChgltCN:           ISwT-PDI-AUTI/Cj0/1&2           Examination?.                 15 roject No.: 04-0368                                   WddDeaerptims:         Lva HdMridional       3   Devicetufizrratie.:       WAT-WALCON0001__
Derault Radiusin.
Mad-CatE       07A                                     S" rPath rswla . SPMeeid                                 Exam Date               Aariatiinas Tiem                 Surfe.Temprratr, F Data AcquhitdiOeOrator (s)1Si           Lefel: CarlestBarrera/m I il0M                                                   20QU
: 88. In R SlllristQ'ivoptlohl):
                                                                                                                            =                                              Strt           I           a 1507           152J             7S           1       78 Scan:
N'A Module Param-aerse R7A Cal 13 Calihtatiou Recards: dsuArnualionNetes:
Sesa Contr.iler araoaetaers .etAtild Controler                  PAr Boom Piovt LowuerLinit Uparlimit
Status Aele Direction ssm Offetw Sten Offset _ _WAT-13 _ IChhck for limitations due to the reximlit of the lower head riinetl- -On 55, (-)- -140(i ) -, -- -) ObO1301 insthiunienta__6on iibeies Chvanne 2 On 55 (+} + 1.40(in) -1.3Xin) 0S01302 Chuannel 3 OD SLIC 40 (- 2. 00(inl + i72(la) 0b01303 Chmnel 4 Oe SLIC40 2a +200(iiti  
                                                                      =
+ 1.72kab 0t01304 ____ __ naatiansResraar.
294 h           Actual 29496 30522 scao Axi LowerLimit upLimit Pletaed 1160 3662 Actuad 14t0 3000 Positionall Paranetas Bam Direction:
Channel 5 OR OL1 (+ + &deg; 0&deg;(in) + I 72(in) 090 1305 Liruited cuisination.
1ansduccrSize:
due to tbhe proxmeityi of the cmc barl Cma 6 Off MA^ M.A N/A NA N/A andi-rotationl lups ond thc lower head irnstrUrmCtstiort wtbe Cb__ _ 7 Off N _A N/A NiA 0IA N/A _Channt d S f f IA NA NIAt N/A N/A Incnre t A Scan Paiton Aetal R~erdable Indicatlew Axal,3t Beormak SCL nNo-3 1 crecttposition Scan Posiwoii _ Yes No N/AlAttachment-St~ Str SaiW I _SloP Clum.( t d( i2L_ lf O Yes glNo __ _ _ _ _ __ _ _ _ _1-20 29490 30529 14n8 2999 Chonnd2 0 Ei El I'udt)lcE,.luatio*
Dn/Up 1.00 I.
Chaum: 3 0 Ei O Resp4red;Channcl 4 0 El LI El Yrs El No ChannelS 0 W El ArchireTei'(1c'ha.~:-Cannel 60 11 0 g IAht= _ =Chalfte 7 0 0 El Atis 'l apDe-Ct Nio.I _ Cblumel 2a0 Wi3 A"dSPIT Lenitll I S Date l 7 / x"/ 0 ei-I.I 9 W El CD 1.0 CA aus ua)O. St ai9i_.Wes Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Ihspection Program Request for Relief 1-ISI-18 Attachments Exam Number 15 Watts Bar Unit 1 RPV-W02-F LWR Rd Meridional  
Inerenent             Boom Rotateb         Inremi Interval           54 Mcder               Automatic Scan         CORTvrMn,Counts           100                               Converion Counus           10t0 CodeofOeertap:
@ 300 Deg Page I of I Ai Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 12.34 -13.27 299.48 -304.34 2.29 -2.94 Channel 1 300.45 -305.28.15.26 -16.19 Feature Analysis Comments Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Module Inc.Scan Coordinates Axis Axis Channel 2 300.45 -305.28 9.41 -10.34 Channel 3 298.28 -303.06 14.84 -15.77 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 298.28 -303.06 9.83 -10.76 Channel 5 298.28 -303.06 12.35 -13.28 boAVrn. _zzz/OAop z&fXbOj-E3A-29 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Slte/Pla*t:
Number offScans.
Watts Bar Weld Identificesona:
I0 20 I
RPV-WO2-F Proi/Rev/Cbg4CN:
ScanMotion:           Bi-directional       Convaseion Units           Degrees                           CoDversion UtniLt           Netrees                       Headttotate Prticow:               O00 Couection:               Derault           Radiusin.                 88. In                             R                         SlllristQ'ivoptlohl):                                             N'A Module Param-aerse                 R7A       Cal 13                                                       Calihtatiou Recards: dsuArnualionNetes:
BwT-PDI-AUTI//00/1&2
Status         Aele       Direction       ssm Offetw       Sten Offset                 _ _WAT-13 _             IChhck forlimitations due to the reximlit of the lower head riinetl-         -On             55,       (-)-             - 140(i           )     - )        , -- -       ObO1301           insthiunienta__6on iibeies Chvanne2            On             55         (+}             + 1.40(in)       -1.3Xin)                         0S01302                                                                                   9 Chuannel 3         OD         SLIC 40       (-                 2.00(inl       + i72(la)                                                                                                                 W 0b01303 Chmnel 4           Oe         SLIC40                         +200(iiti 2a            + 1.72kab                 ____  0t01304 __               naatiansResraar.                                               El CD Channel 5           OR             OL1       (+               + &deg; 0&deg;(in)       + I 72(in)                       090 1305           Liruited cuisination. due to tbheproxmeityiof the cmc barl Cma 6           Off           MA^         M.A                 N/A             NA                               N/A             andi-rotationl lupsond thc lower head irnstrUrmCtstiort wtbe 1.0 CA Cb__ 7_            Off           N _A       N/A                 NiA               0IA                             N/A                                                                       _
_zminatim No. id Project N.: 04-0361 1Wed4 Dseriptie:
Channtd S             f           IA         NA                   NIAt             N/A                             N/A Incnre     t A Scan Paiton Aetal                             R~erdable Indicatlew                                                   Axal,3t Beormak SCL nNo-3           1crecttposition              ScanPosiwoii        _           Yes     No     N/AlAttachment
L-wr lHdMIrvidic/R 3( Devke Ceflr uratiti WAT-WALCON-00 l n ModComL: 0781 IScas Pt Drawim: SPMatid r un Dote I Examinat'iaion c __TSe rfaca Tomerature h F Data Acquistt Operator (m)ISNT level: navid Iti leiljan I1 I0Maruc 2005 7S175 Str F--Scam ControllerParsaeters locremsentAxl, Plagued Actual Sam Axh Planned Actual ptsitloajl Parmete Cmetrollcr POR LowerLimit 1160 1552 Lower lmit 28986 28986 Beam DIection:  
                    -St~           Str         SaiW I _SloP           Clum.( t     d(     i2L_       lf O Yes glNo __                       _     _   _     _     __           _      _   _     _
'C/Ccw Scan: BoomaRote Up Limit 3698 3699 UpperLiiut 31014 31014 rTuwduccrSiz:
1-20         29490         30529       14n8         2999       Chonnd2 0             Ei     El I'udt)lcE,.luatio*
1.00 Jaerteacat:
Chaum: 3 0             Ei     O   Resp4red; Channcl 4 0           El     LI       El Yrs El No ChannelS 0             W       El ArchireTei'(1c'ha.~:
Boom Pivot ITcrement hterwal 54 DCI 3 Code % of Overlap: 10 Mode: Automatic Scan Comnerion Cwosb 100 Conversior Comts 1o0n Numbernof Scat 48 ScanMotion:
                                                                      -Cannel 60             11     0g            IAht
Bi-diredelonal CcnatersioUrnits Dere CombersionUnits Degroe Head Rltectl'eati*
                          =         _           =Chalfte                     7 0           0       El Atis       'l apDe-CtNio.
90.00 Correaion:
I           _             Cblumel 2a0 Wi3 A"dSPIT LenitllI                                  S Date l               7             /                                 x"/0ei-aus ua)O.
DdiUlt Radius In. 18.19 Radius hL 8I.19 Hoist (Pivot Point): N/A Module Paranmters:
St ai9i_.Wes
07B Cal 13 Calibration Records: Examwlnaloe Notes: Status Amok Direction Scan Offset Step Offtet WAT13 Check for limitalions due to the proximity of the lower head Channel I On 55 (+) + .i40m) 1.35(in) 0801301 instrumentation lubes.hanuebl2 On 55 -) 40(in) 1.35(in) 0801302 Channel 3 On SUC 40 (+) + 2.00(M) + I.72(in) 0801303 Chaonncl4 On SUC40 ) ._ -2.00(in) + 1.72(in) _ 0801304 Exemlnmtio tRemarksm Channect5 On OL (+) + 0. Din) + I 72(in) 0801305 Limitd em in de to the Roxity of the core bante Channel 6 Off N/A N/A N/A NVA S/A anti-rotation luss and the lower head instrumntation tbes.Channel 7 Of1 N/A N/A N/A NtA N_ A channel S Off NA NtA N NA N/A Iacrement  
 
& Scam Psaltloms Actual Ricordable ladleatloas Analyst Rsuarbs Scan No.(a) Incremmit Position Scan Psition Yes No NtA  
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Ihspection Program Request for Relief 1-ISI-18 Attachments Exam Number 15                                                       Page I of I Ai Watts Bar Unit 1 RPV-W02-F LWR Rd Meridional @ 300 Deg Cursor Box 1 of 1 Scan Axis                         12.34 - 13.27 Inc. Axis                      299.48 - 304.34 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                      300.45 - 305.28.
Scan Axis                        15.26 - 16.19 Channel 1 Feature Analysis                       Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                     300.45 - 305.28 Scan Axis                          9.41 - 10.34 Channel 3 Module Coordinates Inc. Axis                      298.28 - 303.06 Scan Axis                        14.84 - 15.77 Channel 4 Module Coordinates Inc. Axis                       298.28 - 303.06 Scan Axis                          9.83 - 10.76 Channel 5 Module Coordinates Inc. Axis                      298.28 - 303.06 Scan Axis                        12.35 - 13.28 boAVrn. _zzz
                                                    /OAop   z&fXbOj-E3A-29
 
1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Slte/Pla*t: Watts Bar                                 Weld Identificesona: RPV-WO2-F                 Proi/Rev/Cbg4CN:     BwT-PDI-AUTI//00/1&2         _zminatim No.               id Project N.: 04-0361                                   1Wed4 Dseriptie: L-wrlHdMIrvidic/R 3( Devke Ceflr uratiti           WAT-WALCON-00                 l       n ModComL: 0781                                         IScas Pt Drawim: SPMatid                             r un Dote     I Examinat'iaion c               __TSe   rfaca Tomerature h F Data Acquistt Operator (m)ISNT level: navid Iti leiljan I1                                                 I0Maruc 2005                                           Str 7S175           F Scam   ControllerParsaeters       locremsentAxl,             Plagued Actual     Sam Axh
                                                                                                              -            Planned           Actual               ptsitloajl Parmete Cmetrollcr                 POR         LowerLimit                   1160                 1552       Lower lmit           28986             28986       Beam DIection:             'C/Ccw Scan:                 BoomaRote         Up Limit                   3698                 3699       UpperLiiut           31014             31014       rTuwduccrSiz:                   1.00 Jaerteacat:           Boom Pivot       ITcrement hterwal           54                               DCI                   3                             Code %of Overlap:                 10 Mode:               Automatic Scan     Comnerion Cwosb             100                             Conversior Comts     1o0n                         Numbernof Scat                   48 ScanMotion:           Bi-diredelonal     CcnatersioUrnits           Dere                             CombersionUnits       Degroe                       Head Rltectl'eati*             90.00   ~.              .
Correaion:               DdiUlt         Radius In.                 18.19                           Radius hL             8I.19                         Hoist (Pivot Point):           N/A 0    :-
Module Paranmters:               07B       Cal 13                                                     Calibration Records: Examwlnaloe Notes:
Status         Amok     Direction       Scan Offset     Step Offtet                     WAT13         Check for limitalions due to the proximity of the lower head           us -,
Channel I         On             55       (+)             + .i40m)           1.35(in)                     0801301       instrumentationlubes.
hanuebl2         On             55         -)                 40(in)         1.35(in)                     0801302 Channel 3           On         SUC 40       (+)             + 2.00(M)       + I.72(in)                     0801303
                                                                                                                                                                                                          )0Q Chaonncl4           On         SUC40   )       ._         - 2.00(in)       + 1.72(in)         _         0801304       Exemlnmtio tRemarksm Channect5           On           OL       (+)             + 0.Din)         + I 72(in)                     0801305         Limitd em in de to the Roxity of the core bante Channel 6           Off         N/A       N/A                 N/A           NVA                           S/A           anti-rotation luss and the lower head instrumntation tbes.
Channel 7           Of1         N/A       N/A                 N/A             NtA                           N_A                                                                              9  -4  MP On" channel S           Off         NA         NtA                   N           NA                           N/A w ;*,On          f Iacrement & Scam Psaltloms Actual                         Ricordable ladleatloas                                         Analyst Rsuarbs                                               CD    T1 Scan No.(a)     Incremmit Position           Scan Psition                   Yes     No     NtA


==Attachment:==
==Attachment:==


Start ShOD Storl StOp Chanel 3 O 0 0 Yes GA No S -39 1552 3209 28986 31014 omwnel2 0 F5 0 Forer Evehtion 40 -42 3273 3378 28986 30342 Channel 3 0 E 0 Rcqmired 43 -4 3425 13698- 29769 30342 Chane) 4 0 a 0l 0C Yes Ql No cjamad s 0 0 La A iduevTape/CDNo.:-Channel 7 0 0 G3 AnsyisTape/CDNo.:
Start         ShOD       Storl         StOp     Chanel     O3              0         0 Yes GA No S - 39         1552         3209     28986         31014       omwnel2 0         F5     0   Forer Evehtion 40 - 42       3273         3378     28986         30342       Channel 3 0         E       0   Rcqmired 43 - 4         3425     13698-       29769         30342       Chane) 4 0           a     0l       0C Yes Ql No cjamad s 0         0       La   A iduevTape/CDNo.:
Aalyst / SN1 Level I Date: _1 ORM WCOCO U14. ee1-0541)~. .0 :-us -,)0Q 9 -4 MP On" w ;*,On f CD T 1 Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-1SI-18 Attachments Exam Number 16 Page 1 of 2 Watts Bar Unit 1 RPV-W02-F LWR HD Meridional  
                                                                    -Channel 7 0         0       G3 AnsyisTape/CDNo.:
@ 300 Deg Cursor BOx 1 of 1 Scan AXiS Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Feature Analysis Comments Module Coordinates Inc. Axis Scan Axis 294.13 -295.06 21.52 -26.38 2.29 -2.94 Channel 1 26.20 -31.01 291.21 -292.14 Channel 1 Summary No Recordable Indications channels 1, 2, 3, 4, and 5.Channel 2 26.20 -31.01 297.06 -297.99 Module Coordinates Inc. Axis Scan Axis Channel 3 24.04 -28.85 291.63 -292.56 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 24.04 -28.85 296.64 -297.57 Channel 5 24.04 -28.85 294.12 -295.05..i , p I' i .iS I .i' 4 i 40rV- t .7// ~4 q 7~tc 2i'aj -.E3A-31 ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF l-ISI-19 Summary: Due to design configuration of the reactor vessel outlet nozzles, volumetric examination of the outlet nozzle-to-vessel welds during the Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved.
Aalyst / SN1 Level I Date:                                                                                                                                                                   _
The design configuration of the outlet nozzle integral extension interferes with performance of an ultrasonic scan from the integral extension side of the nozzle to vessel weld, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of this component is required in accordance with ASME Section XI Table IWB-*2500-1, Examination Category B-D, Item Number B3.90. The full volume weld examination requirement is illustrated by ASME Section XI Figure IWB-2500-7 (b).An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the outlet nozzle-to-vessel welds. The design configuration limits the best effort ultrasonic examination to approximately 76 percent of the required volume of each of the outlet nozzle-to-vessel welds. The volumetric examinations resulted in no recordable indications for nozzles N-15, N-16 and N-17. Two code allowable indications were recorded for nozzle N-18. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the outlet nozzle-to-vessel welds.In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requiremeni due to physical restrictions.
1 ORM WCOCO ee1-0541)
Relief is requested from these examinations because the code requirement is impractical to implement.
U14.
 
Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief 1-1SI-18 Attachments Page   1 of 2 Exam Number 16 Watts Bar Unit 1 RPV-W02-F LWR HD Meridional @ 300 Deg Cursor BOx 1 of 1 Scan AXiS                       294.13 - 295.06 Inc. Axis                        21.52 - 26.38 Depth In Material                  2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis                        26.20 - 31.01 Scan Axis                        291.21 - 292.14 Channel 1 Feature Analysis                        Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.
Channel 2 Module Coordinates Inc. Axis                        26.20 - 31.01 Scan Axis                        297.06 - 297.99 Channel 3 Module Coordinates Inc. Axis                         24.04 - 28.85 Scan Axis                        291.63 - 292.56 Channel 4 Module Coordinates Inc. Axis                         24.04 - 28.85 Scan Axis                        296.64 - 297.57 iS  I  .
Channel 5               . .
Module Coordinates i' 4  i i ,
Inc. Axis                        24.04 - 28.85 p I Scan Axis                        294.12 - 295.05           ' i     .
40rV- t .7     // ~4q7~tc 2i'aj -.
E3A-31
 
ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF l-ISI-19 Summary:
Due to design configuration of the reactor vessel outlet nozzles, volumetric examination of the outlet nozzle-to-vessel welds during the Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved. The design configuration of the outlet nozzle integral extension interferes with performance of an ultrasonic scan from the integral extension side of the nozzle to vessel weld, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of this component is required in accordance with ASME Section XI Table IWB-*2500-1, Examination Category B-D, Item Number B3.90. The full volume weld examination requirement is illustrated by ASME Section XI Figure IWB-2500-7 (b).
An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the outlet nozzle-to-vessel welds. The design configuration limits the best effort ultrasonic examination to approximately 76 percent of the required volume of each of the outlet nozzle-to-vessel welds. The volumetric examinations resulted in no recordable indications for nozzles N-15, N-16 and N-17. Two code allowable indications were recorded for nozzle N-18. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the outlet nozzle-to-vessel welds.
In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requiremeni due to physical restrictions. Relief is requested from these examinations because the code requirement is impractical to implement.
System/Component(s) for Which Relief is Requested:
System/Component(s) for Which Relief is Requested:
e Code Class 1 Reactor Pressure Vessel Outlet Nozzle-to-Vessel Welds.e Weld Identifiers:
e Code Class 1 Reactor Pressure Vessel Outlet Nozzle-to-Vessel Welds.
N15, N16, N17, and N18.Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.
e Weld Identifiers: N15, N16, N17, and N18.
E4-1 ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 Code Requirement:
Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.
E4-1
 
ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 Code Requirement:
WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-D, Item Number B3.90, Reactor Vessel Nozzle-to-Vessel Welds, examination requirement as defined by Figure IWB-2500-7(b).
WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-D, Item Number B3.90, Reactor Vessel Nozzle-to-Vessel Welds, examination requirement as defined by Figure IWB-2500-7(b).
Code Requirements from Which Relief is Requested:
Code Requirements from Which Relief is Requested:
Relief is requested from performing the required volumetric examination on essentially 100 percent of the reactor vessel outlet nozzle-to-vessel welds.Basis for Relief: The design configuration of the reactor vessel outlet nozzles precludes a volumetric examination from the vessel shell of the required volume for the outlet nozzle-to-vessel Welds N15, N16, N17, and N18. The configuration limits the volumetric examination of the code required examination volume to 76 percent. Reference Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.
Relief is requested from performing the required volumetric examination on essentially 100 percent of the reactor vessel outlet nozzle-to-vessel welds.
Basis for Relief:
The design configuration of the reactor vessel outlet nozzles precludes a volumetric examination from the vessel shell of the required volume for the outlet nozzle-to-vessel Welds N15, N16, N17, and N18. The configuration limits the volumetric examination of the code required examination volume to 76 percent. Reference Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.
Alternative Examinations:
Alternative Examinations:
In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations of the outlet nozzle-to-vessel welds.Refer to Enclosure 4 Attachments for the examination data reports.Justification for the Granting of Relief: The design configuration of the reactor vessel outlet nozzles precludes ultrasonic examination of essentially 100 percent of the outlet nozzle-to-vessel welds. The nozzle-to-vessel weld examinations were performed using automated ultrasonic (AUT)scanning equipment and AUT' data recording/analysis systems.The target scope of the examinations included 100 percent of the accessible weld. The examination coverage requirements for the nozzle-to-vessel welds are discussed in Enclosure 5.E4-2 ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF I-ISI-19 Examination of the nozzle-to-vessel welds is obstructed by the outlet nozzle integral extension.
In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations of the outlet nozzle-to-vessel welds.
The design configuration allows for ultrasonic examination of approximately 76 percent of the required volume.The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume A-B-C-D-E-F-G-H-I is depicted on ASME Section XI Figure IWB-2500-7(b).
Refer to Enclosure 4 Attachments for the examination data reports.
The outlet nozzle integral extension limits two-direction transverse coverage from the integral extension side of the nozzle-to-vessel weld. The integral extension restricts the ultrasonic search unit scan surface.In order to examine the outlet nozzle-to-vessel welds in accordance with the code requirement, the nozzles would require extensive modificELtion.
Justification for the Granting of Relief:
This modification would be impractical to implement.
The design configuration of the reactor vessel outlet nozzles precludes ultrasonic examination of essentially 100 percent of the outlet nozzle-to-vessel welds. The nozzle-to-vessel weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT'data recording/analysis systems.
Other examination techniques were also determined to be impractical for this configuration.
The target scope of the examinations included 100 percent of the accessible weld. The examination coverage requirements for the nozzle-to-vessel welds are discussed in Enclosure 5.
Due to the design configuration of the outlet nozzle-to-vessel welds, ultrasonic examination from the inside surface of the vessel provides more coverage than ultrasonic examination from the outside surface where the outside surface has limited access. Use of AUT equipment from the inside surface reduces personnel radiation exposure The outlet nozzle-to-vessel welds received 100 percent two-direction parallel coverage and 100 percent two-direction transverse coverage from the shell side of the nozzle-to-vessel weld with the sound beam directed toward the weld.Limited two-direction transverse scans were performed from the integral extension side. A one-direction parallel examination was also performed from the nozzle bore resulting in 100 percent coverage.
E4-2
The results of these examinations recorded no reportable indications in Welds N-15, N-16 and N-17. Two code allowable indications were recorded in Weld N-18. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the outlet nozzle-to-vessel welds.E4-3 ENCLOSURE 4 TENNESSEE VIALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10CFR 50.55a(g)(5)(iii).
 
Implementation Schedule: This request for relief is applicable to WBN's first 10-year inspection interval which began May 27, 1996 and ends December 26, 2006.E4-4 ENCLOSURE 4 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)FIRST 10-YEAR INTERVAL INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 ATTACHMENTS
ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
: 1. Examination Data Sheets for Weld N-15 Pg E4A-2 2. Examination Data Sheets for Weld N-16 Pg E4A-13 3. Examination Data Sheets for Weld N-17 Pg E4A-24 4. Examination Data Sheets for Weld N-18 Pg E4A-35 E4A-1 ISwT Examination Summary Record Proct Mo: Slb: SUl_1 Sheet Ne: 368 Watts Bar Nuclear Plant Unit 1 300I20 Examination Area: Reactor Pressure Vesse LlnalAssembly:
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF I-ISI-19 Examination of the nozzle-to-vessel welds is obstructed by the outlet nozzle integral extension. The design configuration allows for ultrasonic examination of approximately 76 percent of the required volume.
Nozzl to She Weld N-15 0 ldeutlcaTion; Outet Nozzle at 338-degrees T NIH NDE Pnxedmut Exem R E R.ohAion CNF 8yhosAN hLmb f Eangle L B An brt R, Ri.d NoRe.AUT ISWT.POAUT1MM 10S AUTO -AUTOfcr&Ilehkn~meaWaU10y*.
The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume A-B-C-D-E-F-G-H-I is depicted on ASME Section XI Figure IWB-2500-7(b). The outlet nozzle integral extension limits two-direction transverse coverage from the integral extension side of the nozzle-to-vessel weld. The integral extension restricts the ultrasonic search unit scan surface.
E=akM&sect;.W IC" 2 100 AUTSUC40 X _ Ca p...d fr d o were aKmwbd do to nrtozd 1BS ALIT SLIC40T X -CB Integiexdel 105 AUT55T X .CB tSWr-FVI-AIT4IW 99-104 AUT PAlS X .CB Exradona Opefled"om noaee bore.P Oqrod 5 r /i. 1 / t te: Pxge IS3moory No: 4 { 13-Mar-5 OF 1F 1300020..CO0 0~ri I V f'4f-11111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SiteFhlant Wats Bar MWeld tdifflcatlon:
In order to examine the outlet nozzle-to-vessel welds in accordance with the code requirement, the nozzles would require extensive modificELtion. This modification would be impractical to implement. Other examination techniques were also determined to be impractical for this configuration. Due to the design configuration of the outlet nozzle-to-vessel welds, ultrasonic examination from the inside surface of the vessel provides more coverage than ultrasonic examination from the outside surface where the outside surface has limited access. Use of AUT equipment from the inside surface reduces personnel radiation exposure The outlet nozzle-to-vessel welds received 100 percent two-direction parallel coverage and 100 percent two-direction transverse coverage from the shell side of the nozzle-to-vessel weld with the sound beam directed toward the weld.
FPV-N15 Prau/Rev/ChgJICrl lSwT-PDI-AUT4/0 ExamiationNo_
Limited two-direction transverse scans were performed from the integral extension side. A one-direction parallel examination was also performed from the nozzle bore resulting in 100 percent coverage. The results of these examinations recorded no reportable indications in Welds N-15, N-16 and N-17. Two code allowable indications were recorded in Weld N-18. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the outlet nozzle-to-vessel welds.
J9"reJedN.:
E4-3
040368 WldDeacription:
 
fhaNn-Io 3*-(56' DeecC eration: WAT-NO7CON.000l Mod-Cos: 30 Sn Path Drawi. SPNOZOUT Exam Date i Examinatlon Time Sura Ter tuwc!Pita Acquisiti.
ENCLOSURE 4 TENNESSEE VIALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
Operator (s) I SNT Level: Jets R. Delgado I/H Alan Scsaefer I NIA 0B Mar& 2005 204 l 2100 76 nd Data Acquisition Scan Controller Paramnet IncrementAxis PlIeaned Actual Sm Asia Planned Actual P1'eitioaa Paraneters Controller PaR Lowerlimit 85.42 85.42 LowerLiUit 5.00 5.00 BeamDiecti.n Twd Scan: HeadRotate Upp Linit 107.42 l 107.42 Inpperliit 65.00 65.00 TransducerSize:
FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10CFR 50.55a(g)(5)(iii).
22mm x45mrn lcrnent Boom Extend ncIentnterval 1.00 Resolution 0.20 Co&%of Overlap: N/A Modc Antoomtaic Scan Corversion Counts 100 ConverionCounts 100 NunmberofScmnr.
Implementation Schedule:
23 Scan Moliw Bi-directional ConversionUnits Inches Coversion Units Degrees BoamSotatePosiutia 358.00 Corrections Default Ra10ln 14.50 Hoist @ Nozzle C& 83.95___ arenmret 30 Caua 2sc1rdabxd cimiTatioiNt tes.Sbw .e De._O: !rr WAT-70!t Chandno i On_ PAL () + 90.0(den) e 000(ini 1200201 1hz2 552 On PA16. .+ 96.00n(deg)  
This request for relief is applicable to WBN's first 10-year inspection interval which began May 27, 1996 and ends December 26, 2006.
+ 000(in) 1200201 Cael 3 oa N/A 0/A NIA IVA NIA Chsnn l4 Off N1A N/A N/A N/A N/A KianationRemarks4 Cannl 5 Off NIA NM 'N/A N/A _ NIA CDInnel 6 Off N0A /A MA NA N/A C d7 Off N/A N/A N/A NtA N/A Chne Off N/A iN/A N/A N/A. N/A DQ t -Analysis Inrertent  
E4-4
&Sm Postions Actual Record ble Indications lAnslytRelarims Scam N .(s) incr~em Position T sca. tioshon Yes No N/A lAttachment O. SWr stop Star _Stop_ al1m El}&sect;7 YeS 13 NO 1-23 S5.42 107i42 5.00 65.00 Clal 2 0 l Furthrkyaluxtin Chnn_ _ 3 El o__ R__ _ire2 Channel 4 0 Fi El n Yes o1 No t 5and O D TV3 e C No.:= Cluanel 6 0LIEl lChmid7 El 0 ElAayiTope/C1wo.
 
._ _ _ Channel ii O i )Analyst/ SKTLevelDklC I Dale: e.~ a i .. Il*OIt e f~rARA'.4 O t1:,,UTM (M-..sm \.- I -
ENCLOSURE 4 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
IEII SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:
FIRST 10-YEAR INTERVAL INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 ATTACHMENTS
Walls Bar lWeld ntlfil on: RPV-N15 Pro/Re)Ck (CN: JSwT-PDI-AUT4,)0 Fx EamitioaN.:
: 1. Examination Data Sheets for Weld N-15         Pg E4A-2
J00 PrJ -te 04-0364 lWld Description.
: 2. Examination Data Sheets for Weld N-16         Pg E4A-13
Ol-z~et32-1:
: 3. Examination Data Sheets for Weld N-17         Pg E4A-24
C*k C 8 Wigurstiow; Project Na. 04.36*WNdw cion o~skwh SW33 W164 ol. oS a WAX-NOZCON-0001 Mo&Coat: 30 lScaursthBral SPFNOZOLtT ExnoDate Examhiatio TIme Surface TeMature IF Date Acquisition Operator (a)ISNT Level: Jena RLDelgadoIlt Alsn Scuaeferl lA 08 Mard.2005 S1at11 Ed Sjbrt L End Data Acquisition Scan ControllarParametrs laceamentAls Planed Actual Scan Axis pinnatd Actual Positionl Paraseters Controller:
: 4. Examination Data Sheets for Weld N-18         Pg E4A-35 E4A-1
PaR Lowerlimt S5.42 85.42 Lowerlimit 64.00 64.00 Bean Directiow Twd Sccn HoodRotate Upr Lit 107.42 10741 UperLimit 125.04 125.04 Trraoducer Siz.: 22mm x45mm Inctroan:
 
BwoomExtend lnereaat Interval 1.00 Resolution 0.20 Code % of Overlap: N/A Mode: Auteastic Sen CoVervsiW cDnMts 100 Conversin.Counls 100 , Number of Ses: 23 Mau MotiQ Bi-direriioni Conversion unils Indchs Cnnvesion Uits Degre IBoot Rotae Position 358100 Corecstion:
ISwT Examination Summary Record Proct Mo:                                                     Slb:                                                             SUl_1 Sheet Ne:
Delault Radius ln. 14.50 IHoist 'Nozzle C/L 83.98 Model.Paranaters:
368                                                           Watts Bar Nuclear Plant Unit 1                                   300I20 Examination Area:         Reactor Pressure Vesse LlnalAssembly:             Nozzl to She Weld N-15                                   0 ldeutlcaTion;Outet Nozzle at 338-degrees                             T NIH NDE                   Pnxedmut           Exem                   R     E       R.ohAion CNF 8yhosAN             hLmbf      Eangle       L     B An brt R, Ri.d NoRe.
30 Cal 201 Calibration Records: IExamnination Notem SAbt. W l I. 0.. f. orr. wT2 Chwmnd I On PA16-L () + 90.00(deg)
AUT               ISWT.POAUT1MM           10S         AUTO         -                         AUTOfcr&Ilehkn~meaWaU10y*. E=akM&sect;.W IC" 2             100     AUTSUC40     X     _ Ca                 p...d   fr   d o were aKmwbd do to nrtozd 1BS     ALIT SLIC40T X     - CB                 Integiexdel 105       AUT55T     X     . CB tSWr-FVI-AIT4IW       99-104     AUT PAlS   X     . CB                 Exradona Opefled"omnoaee bore.
: 4. O OO('m) _120020t U nn ce2 Un PAn6-S 1 + 90r00( rlce) + _ __(in) 12A0201 Channel 4 Of N A N/A N/A N/A2E ieoerrs Channel O /A NtA }ICA Ne A 0 A Channel 6 0/T NM N/A NA N/A MA CCannelt7 Off A NM N/ACNoA N/A d a Off N/A MIA NMA Nn A N/A Data Antbsly lncea nt & Seon Positiont Artual Rtecordable Indicatiensl AnalystRemar Scn ncls) " Position Sew FPosition Yes No N/A Afshet Ss o s tat Sto Sg Stop amautue I 0 El O 0 Yes 13 No 1-23 S5.42 It)7.42 64WM 12504 Cbu nac1 n , o Futer Evaluain-Channel 4 0 1 Yes 13 No _Cbannel 5 El 0 m D hd~e No.:.Ch nnel 6 El 0 93 _lChanncl 7 0 0 ED 4nalysisT etCDNo.:=t _Chosanl S 0 r" El t 3 Analst / SNT 4yl IDate: z7M zo .(&deg; s / j' ttar O S-00, rA0 CD2 0 I/1sewryofati.
CO0 0 5
VlT" (r..fw)N- I xJ  
                                                                                                                                                        ~ri Oqrod r        /i.           /1 P
]HI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Siteflinat:
4          {
Waft3Bar Weld Ideatiftcatiot.
t                                   te:
RPV-NI1 5re/ReviCbVIC1&#xb6;:
13-Mar-5 Pxge OF 1F IS3moory No:
ISwT-PDI-AJrT4/0/0 ExaminationN..:
1300020 I       V f'4f-
101 Projectn.:
 
04036S WaIdDescriptona:
11111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SiteFhlant   Wats Bar                                           MWeldtdifflcatlon:FPV-N15                     Prau/Rev/ChgJICrl       lSwT-PDI-AUT4/0     ExamiationNo_             J9 "reJedN.: 040368                                         WldDeacription:       fhaNn-Io         3*-(56'     DeecC eration:         WAT-NO7CON.000l Mod-Cos: 30                                               Sn Path Drawi. SPNOZOUT                                     Exam Date       i Examinatlon Time         Sura     Ter     tuwc!
omNoz-oS6433r(l24-1 DevicoCeonfianmt:
Pita Acquisiti. Operator (s) I SNT Level: Jets R. Delgado I/H Alan Scsaefer I NIA                                   0B Mar& 2005         204     l   2100         76                 nd Data Acquisition Scan Controller Paramnet             IncrementAxis               PlIeaned                 Actual       Sm Asia               Planned       Actual         P1'eitioaa Paraneters Controller               PaR             Lowerlimit                   85.42                   85.42         LowerLiUit             5.00         5.00   BeamDiecti.n                     Twd Scan:                 HeadRotate           Upp Linit                   107.42             l   107.42       Inpperliit             65.00       65.00 TransducerSize:       22mm x45mrn lcrnent             Boom Extend           ncIentnterval               1.00                                   Resolution             0.20               Co&%of Overlap:                   N/A Modc               Antoomtaic Scan         Corversion Counts           100                                   ConverionCounts         100                 NunmberofScmnr.                   23 Scan Moliw           Bi-directional       ConversionUnits             Inches                                 Coversion Units         Degrees             BoamSotatePosiutia             358.00
WAT-NOZCON-0001 Med.CnL- 30 [Se9D PsthSDrawtnt:
                                                                                                                                                                                                '.4      O Corrections             Default                                                                               Ra10ln                   14.50             Hoist @ Nozzle C&               83.95
SYNOZOUI Foran-Dae b Erlmnntion 3 SorbzeeTemperature F Dit Aequlsitton Operator (s)ISNIT Level: Jease IL Delpo b/ll Al-nSchaeferIN/A l 2119 S 2ad1 Start i 7d I 219 2131766 Data Acquisitiona Sea Centroller Paa-neters IncremeetAals Planned _ Actua Scan Axis Planned Actual PositionalParameters Controller PaR owerLinik S5.42 85.42 LowerLimit 124.00 124.00 Beam Direction:
___          arenmret 30               Caua2sc1rdabxd                                        cimiTatioiNt                                       tes.
Tid Scon: Heed Rota Uper Limit 107.42 107.42 UpperLimit 185.04 105.04 TrarSduc ize: 22mm x45nmu Incremnto Room Extend Innetment Intcrvjl 1.00 Rolution 0.20 Code%ofOverlap:
Sbw
N/A Mode: AutomaticScan ConveesionCounts 100 Coversion Counts 100 Numaber of Scans: 23 SanMotion.
                                  .e         De._O:                                 !rr                             WAT-70!t Chandno i         On_     PAL               ()             + 90.0(den) e           000(ini                         1200201 1hz2       552 On       PA16.                 .           + 96.00n(deg) + 000(in)                                 1200201 Cael 3             oa           N/A                                 NIA                0/A IVA                               NIA Chsnn l4           Off           N1A           N/A                   N/A               N/A                               N/A           KianationRemarks4 Cannl 5           Off           NIA           NM                   'N/A               N/A                     _       NIA CDInnel6          Off           N0A             /A                 MA               NA                               N/A                                                                       t1:,,
li-directinmdl Conversion~lits Inchs ConversioniUnits Degrees BnoomRotate Position:
Cd7          Off           N/A           N/A                   N/A               NtA                               N/A Chne         Off           N/A           iN/A                 N/A               N/A.                             N/A DQt      - Analysis Inrertent &Sm         Postions Actual                           Record ble Indications         lAnslytRelarims ScamN .(s)
35C00 COleolOD Deault IRadius in. 14.50 Hloist Nozzle C/IL: 83.9i Modal.rameter.
O.
30 Calt01 Clot liuta Records: lEzanlntio Notes: Si iuS Angie iricese San (set SO,. _:,_.-'.0:
incr~em SWr Position   T     Star sca. tioshon                   Yes     No     N/A lAttachment stop                       _Stop_     al1m                                           YeS 13 NO El}&sect;7 1-23       S5.42         107i42         5.00         65.00     Clal 2         0       l           Furthrkyaluxtin Chnn_     3_    El     o__           R__
Channel I On PA16-i (-I + 90.00(deg)  
_ire2 Channel 4       0     Fi       El         n Yes   o1 No t     5andO        D             e         C TV3    No.:
+ Q00(in) 1200201 Uinnel 2 On PA16-S ( 1 90. 00(e + 0.0iin) 1200201 Channel 3 Off N/A N/A N/A N/A N/A Chaunel 4 Off N/A N/A N/A N/A N/A ExainatioaRmanrls:
                                                                =       Cluanel 6 0LIEl lChmid7 El             0       ElAayiTope/C1wo.
Channel 5 Off N/A N/A N/A N/A N/A Channel 6 Off N/A N/A N/A N/A N/A _Channel 7 Off N/A N/A N/A NIA N/A Channtl i Off N/A N/A N/A /A NMA Data Analysis Incaenent  
                                            .       _     _     _       Channel ii O i)
& Scan P"tioneActual Recordable Indicatonyit Remr ScanNots)
Analyst/ SKTLevelDklCI Dale:
Increment Position Scan Position Yes No N/A Atadtment:
e.~     ai        .. e        Il*OIt                                                                                   f~rARA 10=-        UTM (M-..sm           \.-                 I -
Sr rt Stov Stat Stop Channl I 0 E 0 OYes Z! No 1-23 85.4Z 102.42 12400 105.04 Channel2 0 .' 0 Euzthce rEvaluation
 
__ _ _Channel 3 0) P1 lRequired:
IEII SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC                                 EXAMINATION RECORD Site/Plant: Walls Bar                                     lWeld ntlfil on: RPV-N15                           Pro/Re)Ck (CN:           JSwT-PDI-AUT4,)0         EamitioaN.:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Ch anael 0 E l O Yes 0 No Channel 50 0 2 Archive Tpe/CD No.: C__ _ _ _el 6 0 0 ID J ___ _ __ __ _ _ _ __ _Channel 7 01 0 n ly t Elpc/c D N o.: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _____ ChannelS L E _l Analys NT Level/Date:
Fx                      J00 PrJNa.-te 04.36*WNdw Project          04-0364                                 lWld Description.
0 -/. .cAzo)s onD CD~ -U, -Cu INCAS4 ufTs VS.MM I l
cion Ol-z~et32-1:
__ ITL- H SOUTHWEST TECHNOLOGIES c AUTOMATED UILTRASONIC EXAMINATION RECORD SltePit WasBar Weld Identifiation:
o~skwh SW33W164 ol.C*kCoS                    8 a   Wigurstiow; WAX-NOZCON-0001 Mo&Coat: 30                                               lScaursthBral           SPFNOZOLtT                       ExnoDate             Examhiatio   TIme         Surface TeMature IF Date Acquisition Operator (a)ISNT Level: JenaRLDelgadoIlt Alsn Scuaeferl lA                                     08 Mard.2005             S1at11       Ed           Sjbrt L           End Data Acquisition Scan ControllarParametrs               laceamentAls               Planed                   Actual     Scan Axis             pinnatd         Actual           Positionl Paraseters Controller:                 PaR               Lowerlimt                 S5.42                 85.42       Lowerlimit               64.00         64.00     Bean Directiow                 Twd Sccn                   HoodRotate           Upr Lit                     107.42                 10741       UperLimit               125.04         125.04     Trraoducer Siz.:     22mm x45mm Inctroan:             BwoomExtend         lnereaat Interval             1.00                               Resolution               0.20                     Code %of Overlap:               N/A Mode:                 Auteastic Sen           CoVervsiW cDnMts           100                               Conversin.Counls         100             ,         Number of Ses:                   23       00, MauMotiQ            Bi-direriioni         Conversion unils           Indchs                             Cnnvesion Uits           Degre                   IBoot Rotae Position         358100 Corecstion:               Delault                                                                           Radius ln.               14.50                   IHoist 'Nozzle C/L             83.98 Model.Paranaters:             30             Cal 201                                                         Calibration Records: IExamninationNotem SAbt.                                       0.. f.         orr. wT2                         W      l      I.
RPV-N1 5 rr1Rov/ChzffCR:
Chwmnd I             On     PA16-L             ()             + 90.00(deg)         4. OOO('m) _120020t U                 nn ce2 Un       PAn6-S             1             + 90r00(           +rlce)                   _       12A0201
ISwT-PDI-AUT4OA)/0 ExsmilHtlo  
__(in) rA0 Channel 4           Of           N         A                       N/A               N/A                             N/A2E               ieoerrs Channel             O             /A         NtA                 }ICA               0A Ne                                 A Channel 6         0/T           NM           N/A                   NA               N/A                             MA                                                                         CD20 CCannelt7           Off             A         NM                   N/ACNoA                                         N/A d a             Off         N/A           MIA                 NMA               NnA                            N/A Data Antbsly lncea nt & Seon Positiont Artual                             Rtecordable Indicatiensl                                           AnalystRemar Scn     " ncls) Position               Sew FPosition                     Yes   No       N/A Afshet                                                                                     I/
-102 Preoct No.: 04-0368 Weld Deript ion: atNie h -338e (3W 4'-2 Device Configaron:
Ss s o tat               Sto           Sg           Stop     amautue I 0         El       O       0 Yes 13 No 1-23           S5.42       It)7.42         64WM         12504     Cbu nac1     n     ,         o   Futer Evaluain
WAT-NOZCWON-001 Mod .n 3ti Sesn? teDmrrwing-SiNOZOtiT i1Do Date Ermn Tinme Surfle elanperatetre IF Data Aequlsition Operator (s)ISNT Level: JesseRLDelgadolIl Alto Schaefer NlA j St" rt 2 0t St rt 2 End Data Acquisition Sees Controller Parameters n weremeotAxis Plaumed Actual Scan Axis Planned Adcal Positional Parameters Cootroller PaR LowerLimit 85.42 5.42 Lower Limit 184.00 184.00 Scar Dreio Twd Scan: Head Rotate Upper iUmit 10742 10742 Upper Limit 245.04 245.04 Tsinsducer Size: 22mma x45mm Incremeat:
                                                    -Channel                       4 0                   1             Yes 13 No       _
Boom Extend incrtmentlntcryai 1.00 ReSoD , 0.20 Code % of Oveap: NIA Mode: Automatic Scan C0BrefSiSUnCounts 100 NumberofScas:
Cbannel 5           0        El hd~e m              DNo.:
23 Scan Motionr. i-directional ConversionUnits ncises ConvetijonUits Degrees BoumnalatePosition:
                                                                          .Ch nnel 6 El       0         93 _
358.00 Correction:
lChanncl7 0         0         ED 4nalysisT etCDNo.:
Deailt Radiu in -14.50 Hoist A Nozzle CIL Moduleamters 30 Cal 201 Calibration Records: lExanstuaton Notes: Slatas Aurd Directio Eean Sees f stc Offet -cWAi-2Ui Channel I On PAir-L h-) + 90.00(do)  
                                    =t   _Chosanl                                 S 0       r"       El         t3 Analst / SNT 4ylIDate:                                   .         (&deg;                                 s         /             j' ttar z7M      zo  O   S-1sewryofati. VlT" (r..fw)             N-                 I       xJ
+ 0.00to) 1200201 Channel2 O( PA16-S + 9Q00(dog)el_  
 
+ _____ 1200201 Channel 3 Off NiA N/A MA N/A N/A Channel 4 Off N/A N/A N/A N/A N/A Examination Remarks: Chnnel 5 Off N;A NIA N/A N/A N/A Channel 6 OWI N/A N/A N/A N/A N/A Channel 7 OH MA N/A N/A N1A N/A Chaonela Oif NIA N/A N/A N/A NIA I Data Anslyiso Increment  
                                                                          ]HI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Siteflinat:   Waft3Bar                                     Weld Ideatiftcatiot. RPV-NI1 5re/ReviCbVIC1&#xb6;:                                 ISwT-PDI-AJrT4/0/0               ExaminationN..:                 101 Projectn.:     04036S                                       WaIdDescriptona:       omNoz-oS6433r(l24-1 DevicoCeonfianmt:                 WAT-NOZCON-0001 Med.CnL- 30                                               [Se9D PsthSDrawtnt: SYNOZOUI                               Foran-Dae       b         Erlmnntion 3                       SorbzeeTemperature F Dit   Aequlsitton Operator (s)ISNIT Level: JeaseIL Delpob/ll Al-nSchaeferIN/A                                                           l     S 2119             2ad1               Start         i         7d I
&Sean Positions Actual Recordable ndications Analt Remarks In Positction I SCaD Position Yes No NIA Anschmnt: Scam Nol(s) Stety slD p Saart Stop CDateS: t El &deg; OYs r NO I- 23 85.42 107.42 l84.00 245.04 Chawe 2 0 Ei El Further 13valuation Chatine. 3 0I n GI Required:.
219             2131766 Data Acquisitiona Sea Centroller Paa-neters               IncremeetAals               Planned       _         Actua       Scan Axis                 Planned               Actual                 PositionalParameters Controller                 PaR                 owerLinik                 S5.42                 85.42       LowerLimit                   124.00             124.00       Beam Direction:                         Tid Scon:                 Heed Rota               Uper Limit                   107.42                 107.42       UpperLimit                   185.04             105.04       TrarSduc ize:               22mm x45nmu Incremnto           Room Extend             Innetment Intcrvjl           1.00                               Rolution                     0.20                             Code%ofOverlap:                         N/A Mode:               AutomaticScan           ConveesionCounts             100                                 Coversion Counts             100                             Numaber of Scans:                         23 SanMotion.           li-directinmdl           Conversion~lits             Inchs                               ConversioniUnits             Degrees                         BnoomRotate Position:                 35C00   onD CD COleolOD                 Deault             IRadius                                                                   in.                 14.50                           Hloist Nozzle C/IL:                   83.9i Modal.rameter.             30               Calt01                                                           Clot liuta Records: lEzanlntio Notes:
__Ch-nnel4
Si iuS         Angie         iricese           San (set           SO,.                                                     _:,_.-'.0:                                                                 ~  -
[I n la o Yes 13 No Channel, 5 El El 0 AwCDive TVtC No._.Channel 6 0] 0 91 I 5 lChsnnd 7 [ 0 9 E Analysis TyC No.A bae 8 0 El. [E) hIA Analyst I SNT Level / Date: l7 0 1 /15wrORJ f. U St1 fp-. 60 CD Cd R' 0nt D C ai 0 I-tm rj3 C.CD4 on2
Channel I         On       PA16-i               (-I             + 90.00(deg)       + Q00(in)                         1200201 Uinnel 2           On       PA16-S               ( 1               90. 00(e         + 0.0iin)                         1200201 Channel 3         Off           N/A             N/A                   N/A             N/A                               N/A Chaunel 4         Off           N/A             N/A                   N/A             N/A                               N/A             ExainatioaRmanrls:
_p 1111 SOUTHWEST TECHNOLOGIES ImAUTOMATED ULTRASONIC EXAMINATION RECORD __________
Channel 5         Off           N/A             N/A                   N/A             N/A                               N/A Channel 6         Off           N/A             N/A                   N/A             N/A                               N/A       _                                                                                        U,    -
SitetPlant:
Channel 7         Off           N/A             N/A                   N/A             NIA                               N/A Channtl i         Off           N/A             N/A                   N/A               /A                             NMA Data Analysis Incaenent & Scan P"tioneActual                                   Recordable Indicatonyit                                                             Remr ScanNots)       Increment Position                 Scan Position                     Yes     No     N/A Atadtment:
WaffsBar IWed Identifleatlon:
Sr rt         Stov             Stat         Stop     Channl I 0           E       0         OYes Z! No 1-23         85.4Z         102.42         12400         105.04     Channel2 0           Euzthce
RfV-N 15 -romfCebeCN:
                                                                                                  .'     0           rEvaluation
ISwT-PtD-AuT4,/
__ _ _Channel                                                     3     0)             P1 lRequired:                     _     _   _ _     _   _   _   _ _     _   _   _     _   _     _   _
rxamination N.: 103 ProjectNo:
Cu Ch anael     0E l                       O Yes       0 No Channel 50           0       2     Archive Tpe/CD No.:
0440368 WddDeriptie.
6 0 C__ _ _ _el           0       ID             J                   _
Oawnan-_9133t.3W44-5 DeviceCanftiratb:
__ _ __       __   _   _     _   __ _Channel                   7     01             0 Elpc/c  n ly t         DN o.:     _   _   _ _ _   _   _ _ _   _   _ _   _   _ _ _   _   _ _   _   _
WAT-NOZCON-0001 Mod.Coaf.
____                        ChannelS L           E                                                           _l Analys     NT Level/Date:
30 Scan Pati Drawla r SPNOZOULT KIana Date I 1amrbatien Timaa rce Temperature  
0 -/.                 .cAzo)s INCAS4     ufTs VS.MM                 I                                                     l
*F 76 76 Data Aqepisitlo O1erater (s3)t SNT Level Jess Rt Ddpgdo I II Aau Schaefer I N/A 0S Ms 2005 2156 220St 7t'67 Dats Acquisition Scn Controller Paratneten hrensest Axis Plsmed l Actual Scan Axis Phoned l Actal Positional Paramebtrs Controller PaR towerLbtm 85.42 85.42 LowerLimit 244.0_ 24400 i~easuDarects Twd Scna Head Rotate UolprLimit 107.42 10742 U-16Limit 305.04 305.04 Transducer Size 2 2 rm, x 45nom Incremenet Doomrlxtend Ietnterval 1.00 lesohutios 0.20 Codc%oCOvedlp; NIA Mode, Autonatic Scn Ceonvession Counts 100 Conversion Cconts 100 NumberofScans:
 
23 Scan Motion: Bi-disctonsl Ceove3sionUdits Idnces Conversion Units Degrees BoomRobePcosiioa 35800 Corecin Defiult Radios In. 14.50 Hoit44NoxzleC/I.
__                                                     H SOUTHWEST TECHNOLOGIES ITL-c                                           AUTOMATED UILTRASONIC EXAMINATION RECORD SltePit       WasBar                                 Weld Identifiation: RPV-N1 5                     rr1Rov/ChzffCR:         ISwT-PDI-AUT4OA)/0       ExsmilHtlo       -       102 Preoct No.: 04-0368                                   Weld Deript ion:       atNie-    h 338e(3W 4'-2 Device Configaron:         WAT-NOZCWON-001 Mod .n 3ti                                         Sesn? teDmrrwing- SiNOZOtiT                             i1Do Date               Ermn     Tinme           Surfle elanperatetre IF Data Aequlsition Operator (s)ISNT Level: JesseRLDelgadolIl Alto Schaefer NlA                           j                 20t            2St" rt                   St rt             End Sees Controller Parameters Cootroller                  PaR n         weremeotAxis LowerLimit Plaumed 85.42 Data Acquisition Actual 5.42 Scan Axis Lower Limit Planned 184.00 Adcal 184.00 Positional Parameters Scar Dreio                     Twd CD Scan:                 Head Rotate         Upper iUmit               10742                 10742         Upper Limit               245.04       245.04   Tsinsducer Size:       22mma x45mm Incremeat:           Boom Extend         incrtmentlntcryai         1.00                               ReSoD ,                   0.20                   Code % of Oveap:                 NIA Mode:               Automatic Scan       C0BrefSiSUnCounts         100                                                                                   NumberofScas:                     23 Scan Motionr.           i-directional       ConversionUnits         ncises                             ConvetijonUits             Degrees                 BoumnalatePosition:           358.00 Cd R' 0nt Correction:               Deailt                                                                         Radiu in     -             14.50                 Hoist A Nozzle CIL                   D C Moduleamters                 30           Cal 201                                                       Calibration Records: lExanstuaton Notes:
8398 ModuleParmeter,!
Slatas         Aurd       Directio       Eean Sees       f   stc Offet                           -cWAi-2Ui Channel I           On         PAir-L         h-)           + 90.00(do)       + 0.00to)                         1200201 Channel2           O(         PA16-S                       + 9Q00(dog)el_ +                 _____             1200201 Channel 3           Off         NiA         N/A               MA             N/A                               N/A Channel 4           Off           N/A         N/A               N/A           N/A                               N/A             Examination Remarks:
30 Cot 101 Calibrato Records: JFxaminatiol Notea CannelI o t ot PA16-L Sca + 90o00idei ) + 0 N00(n) 120t201 C__ne,2 OS PA1 StS + 90S0t(attS C 0Cl0(1n 120C20N Chne 3 Off N/A NCA NIA NIA N/A _Chnnet4 Oa_ N/A NIA NIA N/A N/A 0 ninstiox aorl: Chunc__5 Off N_/A NaA NIA NIA NIA Cbanot 6 Off NIA N/A NCA N/A NIA Channel 7 Off N/A N/A NIA Nn A 7s A a 8 Off NIA N/A NA NIA NtA Data Attdlysis Iner easa t Susren Faits Acul Reevrdable lodientios Analyst Remarks Scan N Inac) nt Position Scan Position Yes No NIA Attbchmeunt
Chnnel 5           Off           N;A         NIA               N/A           N/A                               N/A Channel 6         OWI           N/A         N/A               N/A           N/A                               N/A                                                                         ai 0 Channel 7           OH           MA           N/A               N/A           N1A                               N/A Chaonela           Oif           NIA         N/A               N/A           N/A                               NIA           I Data Anslyiso                                                                                               I-tm Increment &Sean Positions Actual                           Recordable ndications                                               Analt Remarks In         Positction I       SCaDPosition                  Yes     No     NIA Anschmnt:                                                                                       rj3 C.
_n0() StatW Stec Start lStop Channel I 0 m- 0 O Yes (3 No I -23 o5542 1117.42 l;44.00 305.04 Channdl 2 0 1i 0 Yurther ibvalation
CD4 Scam Nol(s)       Stety         slDp        Saart       Stop   CDateS:t             El       &deg;           OYs       r   NO I- 23         85.42         107.42     l84.00     245.04   Chawe 2     0       Ei       El   Further 13valuation Chatine. 3   0I     n         GI Required:.                                                                                       on2
_Chatmel 3 0 0 El Reqdnred Channal 4 0 0 aw 11 Yes 13 No0 Cbtanels &deg; &deg; S3 ArhvcT"reCD Nu.._Chane 7 Q _- 0_ 13 ayd w o el Anale ad O No.:4lAttstst I SNY I.velltDate:  
__Ch-nnel4                                         [I     n         la         o Yes 13 No Channel,5   El     El       0     AwCDive TVtC No.
\- R -~ 1._ .eA 4 li~~~C- s E/o abrh2O i.t*R2 CD C CD1 wTio m.. vT n M-ftst IIMI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitefPlait!
_.Channel                 6   0]     0         91 I             5 lChsnnd 7   [   0           9E Analysis TyC No.
Wats Bar WWtidldentifiatioa:
A                             bae   8   0       El.       [E)         hIA Analyst I SNT Level /Date:                                                         l7                                                                   0 1 /
RPV-N15 Pro/Rey LCN: ISwT-PD1.AUT4AI/O/0 Txa0tutaN.:
15wrORJ   f. U St1fp-. 60
104 Prolete Ne 04-0368 Weld Deseriptieo:
 
0o Se 53W 50t 3 Da C n rtio WAT-NOZCON-0001
_p                                                         1111 SOUTHWEST TECHNOLOGIES ImAUTOMATED                                                 ULTRASONIC EXAMINATION RECORD                                                 __________
_Mod.CoaL:
SitetPlant:     WaffsBar                                 IWed Identifleatlon: RfV-N15        -             romfCebeCN:           ISwT-PtD-AuT4,/             rxamination N.:           103 ProjectNo:       0440368                                   WddDeriptie.         Oawnan-_9133t.3W44-5 DeviceCanftiratb: WAT-NOZCON-0001 Mod.Coaf.       30                                       Scan Pati Drawla r   SPNOZOULT                       KIana Date       I 1amrbatien Timaa                   rce   Temperature *F Data Aqepisitlo     O1erater (s3)t SNT Level Jess RtDdpgdo I II Aau Schaefer I N/A                             0SMs      2005         2156         220St             7t'6776 i.
30 =ScanPathDrawl.:
76 Dats Acquisition Scn Controller Paratneten             hrensest Axis             Plsmed           l     Actual     Scan Axis             Phoned l         Actal             Positional Paramebtrs Controller                 PaR             towerLbtm                   85.42                 85.42       LowerLimit             244.0_           24400   i~easuDarects                     Twd 22 Scna                   Head Rotate         UolprLimit                 107.42                 10742     U-16Limit                 305.04         305.04   Transducer Size           rm, x 45nom Incremenet             Doomrlxtend                     Ietnterval       1.00                             lesohutios               0.20                       Codc%oCOvedlp;                   NIA Mode,                 Autonatic Scn         Ceonvession Counts         100                               Conversion Cconts         100                       NumberofScans:                     23 Scan Motion:           Bi-disctonsl         Ceove3sionUdits             Idnces                           Conversion Units         Degrees                     BoomRobePcosiioa               35800 Corecin                   Defiult                                                                         Radios In.               14.50                     Hoit44NoxzleC/I.               8398 ModuleParmeter,!               30           Cot 101                                                         Calibrato Records:   JFxaminatiol Notea CannelI             o       tPA16-L ot                Sca         + 90o00idei)     + 0       N00(n)               120t201                                                                           t*
SPNOZOIT Exam Date Examinatieo Tiae SurfaceTeeua re-F Data Acquisition Operator (s)I ENWT Lewd: Jesse R. Delgado I l Alma Schaefer I NA 08 Morch 2005 Start End Start Z1 221 2123 76 1 76 Date Acquisition Scan ConftrelbrP araeeters lB"MeoxtArk Planned Actual Scan Axis Plagued Actual Positional Parameters Controlles PoR Lowerlimit 85.42 85.42 Lower Limit 304.00 l 304.00 Bem Direction:
C__ne,2             OS       PA1 StS                           + 90S0t(attS C           0Cl0(1n                       120C20N Chne 3               Off         N/A           NCA                   NIA           NIA                             N/A                     _
Twd Scan: ead Rote Upper Limit 107.42 107.42 Limit 366.00 366.0D Transducer Size 22mm x 45mn Increment BoomExtend inerement lsterval 1.0D Resolutiot 0.20 Code % of Overlap: NA Modec Automatic Scan Conversion Counts 100 Conversion Courts 100 Nmber of Scsam 23 Scan Motion: Bl-directional Conversion Units inches Conversion Uits Degr soeaeRo ePi 35300 Correction:
Chnnet4              Oa_         N/A           NIA                   NIA           N/A     0                      N/A                 ninstiox aorl:                                             R2 Chunc__5             Off         N_/A         NaA                   NIA           NIA                             NIA Cbanot 6             Off         NIA           N/A                   NCA           N/A                             NIA Channel 7           Off         N/A           N/A                   NIA       7s NnA                                A a     8         Off         NIA           N/A                   NA           NIA                             NtA Data Attdlysis Iner easa     tSusrenFaits    Acul                         Reevrdable lodientios                                               Analyst Remarks Inac) nt Position             Scan Position                                                                                                                                       CD C Scan N                                                                            Yes     No     NIA Attbchmeunt                                                                       _
Default Reaips In 14.50 ioist t Nozzle C/L. Sg8 Module Parameters:
n0() StatW             Stec         Start   lStop         Channel I   0       m-       0         O Yes (3 No I - 23         o5542         1117.42   l;44.00         305.04     Channdl 2   0       1i       0   Yurther ibvalation
30 Cal 101 Calibation Records IMasunination Note: Aubs/ wtevlrae p> ocr /Vji- orZ cc_',,,-0 Chanxel On PA16-L (-) + 90e00tdI dt f OOOn 12DC201 C2:1w]2 On PA16-S t-) f Yql)Obtd)  
_Chatmel                                 3 0         0       El   Reqdnred CD1 Channal 4   0       0       aw       11 Yes 13 No0 Cbtanels   &deg;       &deg;       S3   ArhvcT"reCD Nu.
+U.M0tb) 12WU201 Clusncl 3 Off N/A N/A NIA N/A N/A_Chanel4 Off N/A W9A N/A N/A N/A Examl"Hton Remarks: Channel 5 Otl NIA NIA NIA N/A N/A 01flnd, 6 Off N/A N/A1 N/A N/A NIA Chanel 7 Off N/A N/A NIA N/A _N/A Chanola a Off N/A N/ A N/A N/A N/A Dnbs Analtsbs Increment Jl Stan Positions Actual Recordable Indicains Analyst Remarks Sa o( Inc Position Scan~oiin Yes No N/A Ataha nt: SnNo() Strt- Stop Star Stop bin 1 0 El 0 Oyes il No 1 -23 85.42 107.42 304.00 36 00 Ct d2 0 M7 0j Furdeir lvatnation
                                                              ._Chane           7   Q _-     0_       13 ayd       w       o O                el Anale ad           No.:4l Attstst I SNY I.velltDate:             \-                         R     -         ~           1
__ _Ctuno 3 0 0 E1Required:
                    ._ .                   eA           4         li~~~C-               s             E/o                       abrh2O wTio       m..vT n M-ftst
Cannel4 (R 0 '3 aYes ED No=mu 5rn S OB O Ar chive TycCD No: chlannel 6 0 n1 la c S.lQhinae) 7 0 0 EQ 'AalysTpe No.Analyst/ISNT Level/lDate:
 
I , 0 I fchZ 0 1sWT70Pxx.l UTIN M." An.) \CD0 0!0 251
IIMI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitefPlait!   Wats Bar                                 WWtidldentifiatioa: RPV-N15                   Pro/Rey LCN:           ISwT-PD1.AUT4AI/O/0       Txa0tutaN.:               104 Prolete Ne   04-0368                                   Weld Deseriptieo: 0o           Se 53W 50t 3 Da       C n rtio       WAT-NOZCON-0001             _
_, 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitalpIaat:
Mod.CoaL: 30                         =ScanPathDrawl.:                       SPNOZOIT                       Exam Date             Examinatieo Tiae           SurfaceTeeua       re-F Data Acquisition Operator (s)I ENWT     Lewd: JesseR.Delgado I l AlmaSchaefer INA                        08 Morch 2005           Start       End           Start Z1 221         2123             76         1     76 Date Acquisition Scan ConftrelbrP araeeters           lB"MeoxtArk             Planned                 Actual     Scan Axis             Plagued         Actual             Positional Parameters Controlles               PoR             Lowerlimit               85.42                 85.42       Lower Limit             304.00     l   304.00     Bem Direction:                   Twd Scan:                   eadRote            Upper Limit             107.42                 107.42             Limit           366.00         366.0D   Transducer Size         22mm x 45mn       CD0 Increment           BoomExtend           inerementlsterval        1.0D                               Resolutiot             0.20                     Code %of Overlap:               NA Modec               Automatic Scan         Conversion Counts         100                               Conversion Courts       100                     Nmber of Scsam                   23 Scan Motion:         Bl-directional       Conversion Units         inches                             Conversion Uits         Degr                     soeaeRo       ePi             35300 Correction:             Default                                                                       Reaips In               14.50                   ioist t Nozzle C/L.             Sg8 Module Parameters:           30             Cal 101                                                     Calibation Records   IMasunination Note:
WattsBar Weld Ideatmentian:
Chanxel           On       PA16-L           (-)           + 90e00tdI dt     f OOOn                         12DC201 C2:1w]2           On       PA16-S           t-)           f Yql)Obtd)       +U.M0tb)                       12WU201 Clusncl 3         Off         N/A           N/A               NIA             N/A                             N/A_
RPV.Ni5 Pro/Rev/Chx/ICN ISwT -P AUTlOwl&2 Examinatio N 105 Pro act No.: 0440368 WeidDescrilptio:
Chanel4            Off         N/A           W9A               N/A             N/A                             N/A           Examl"Hton Remarks:
OutletNoz-to-Sh 3383 DtvteCaaflgrutin.
Channel 5         Otl         NIA           NIA               NIA             N/A                             N/A 01flnd, 6         Off         N/A           N/A1             N/A             N/A                             NIA Chanel 7           Off         N/A           N/A               NIA             N/A             _N/A Chanola a         Off         N/A           N/A               N/A             N/A                             N/A wtevlrae Jl Stan Positions Actual Aubs/Increment                            p>          orZ Recordable Indicains Dnbs Analtsbs ocr    /Vji-                cc_',,,-0 Analyst Remarks 0!0 Sa o( Inc Position                     Scan~oiin                     Yes     No     N/A Ataha nt:
WATWALCON-0001
SnNo()Strt-           Stop         Star         Stop     bin 1 0           El           0 Oyes il No 251 1-23         85.42         107.42       304.00       36 00 Ct       d2 0         M7       0j Furdeir lvatnation       __      _
___ ___ ___r _ _S Mad.Coar:
Ctuno 0 3 0           E1Required:
09 Scan Path brawit: SPNO70tJT Exam Date Examkto Timuse 'Surfac Tern turer*Data AcqWLitio Operator (a)/ SNrTLwe Carlesbarrera/llm KellyDaigleI/JVA 12-Mhr40 Start Fad Start End 1600 1610 70 7t--_-Seanm Ceatrofler Pernmmetera Iderer eat Axis Plamed Actual Sean Axis Flaned Actual Positional FPamaters Controller:
Cannel4                     '3 0
PaR LwerLimit 2238 260t Lower WmIt 9000 9000 Beam Diretion:
(R     aYes ED No
CAV/Ccw SCHC Clrmimferential U crLimkit 2958 = 2972 U_ erLimit 9000 9000 Trtnsducer Sizn 1.00 Increment Radial Incrnermt tlrval 90 DCI 7 Codea 9 of Ovart 10 Mode: Automnatic Scan Conversont Ceunts too Conversicon Count 100 Number of Sums: 9 Scan Motion: Bi-directional ConversionUnits Enche Contversico Units Degrees Head Roeae Patliont 0o00 Cxrertion
                                        =mu                                   S OB 5rn        O             Archive TycCD No:
_ _ __ _ _ _ _ _ RAdius Tn. t5A43 Hoist (Pivat POint): N/A Madulet arameters:
chlannel 6 0       n1       la         c S.
09 Cnl33 Calibradtio tReurds: Euaminatlm Notes: C .m. Ao* i Dalroeo OSca onr. eRf.- nMY.i WAT-33 Check for limitations due to the proximity I coonfiuration ofthe Channel I On 55 -7.53(i) 1.05(in) 0303301 outlet nozzle intl extension.
lQhinae) 7 0         0       EQ 'AalysTpe         No.
Channel 2 on 55 4 4 7.53(n) -1.05(in) 003302 Channel 3 On SLIC 40 ( -9.95(in) 2.87(in) 0803303 Channel 4 On SLtC 40 + + 9.95(in) 2.87(in 0803304 Exzanmnatia Remarks-Chansel 5 On OL (+ -10.56(in) 1.22in) 0803305 No=zi Center [toist Position -8398 (nel6 Off NtA NMA N/A NtA N(A Boom RotateNozzle Canter Position -33s00 Channel 7 O(f NtA NtA NtA NA N/A Limited examination due to the oximity of the outdet noznje Channel 8 Off NIA N/A N/A NIA MNA integra alexion Incremnent S&%Sa P~sitioas Actual Recordable ladicatioug Analp Remarksa Scan No.(s) b Position I _on_ IpoSti Yes, }Nto NIA Attedm E N Stout shi tart Sto ChauuneW 1 ~ 0 O ff 0Yes 2No 5 -9 2596 2956 9_000 9W00 Clianndel2 Ci Ei Further Evaluation Channd 3 0 11 0 Required: Cha4_ = Csnc ei4 2 0 O Yes E No Chann5el 0 0 Ei Tape/CD No.:,______ Channl 6 0 0 G 10 AM Channei 7 0 0 2 Analysis TapelCD No:_ Chaon n elBO 0 E N/A A IMrtSN 'L*VtI Dat: .,-r tmeeoa. N. \U g::i0 on 0 0, 0. _f 0r 0 r I r-h K Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-19 Attachments xam Number 105 Page I of 2 Watts Bar Unit 1 RPV-N15 Outlet Nozzle to Shell 0 336 Deg- _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _._ _ _ -_ _ _ -_ _ _ -_ _ _ _ _ _ _ _ _ _ _ _Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Module Inc.Scan Coordinates Axis Axis 90.76 -92.93 21.16 -24.76 6.63 -7.79 Channel 1 25.77 -29.30 102.18 -104.35 Channel 2 25.77 -29.30 79.36 -81.53 Channel 3 27.53 -101.13 -103.30 Channel 4 27.53 -80.41 -82.58 Channel 5 25.77 -29.30 97.81 -:00.01 Channel 5 Summary No recordable indications chs 1, 2.3, & 4.,_j. A if,(a 20c Module Coordinates Inc. Axis Scan AXiS Module Coordinates Inc. Axis Scan AXis Feature Anialysisl Comments:I E4A-10 AftmIIII SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/lieat:
Analyst/ISNT Level/lDate:             I       ,                                       I                        0               fchZ         0 1sWT70Pxx.l UTINM." An.)                                 \
Wats Bar WeldIdei.ttification:
 
RPV-NIS wJe/RevIChjiCN!
_,                                                           1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitalpIaat: WattsBar                                       Weld Ideatmentian: RPV.Ni5                     Pro/Rev/Chx/ICN         ISwT -P AUTlOwl&2 Examinatio N                             105 Pro act No.: 0440368                                       WeidDescrilptio: OutletNoz-to-Sh         3383 DtvteCaaflgrutin. WATWALCON-0001                     ___     ___     ___r       _   _S Mad.Coar: 09                                               Scan Pathbrawit: SPNO70tJT                           Exam Date           Examkto Timuse                   'Surfac Tern turer*
lSwT-PDM-AUJT/O0/Il&2 Rxiamlasti.
Data AcqWLitio Operator (a)/ SNrTLwe                 Carlesbarrera/llm KellyDaigleI/JVA                           12-Mhr40           Start           Fad               Start               End 1600         1610               70                   7t Seanm
Na.: 1ed Pacet Na: 04-036e wel Deed p: Oulet l bNo-to-h 338 Tlviee Ceonfi iratios: WAT-WALCON-0DI_
          -Ceatrofler Pernmmetera         Iderereat Axis               Plamed                 Actual   Sean Axis               Flaned           Actual               Positional FPamaters Controller:
Mod.CmL. O/A _Sea Patb Drawing: SPNOZiJUT Eso Dte Enuinattion Tim Surface Trn rentare F Data Acquisitiom Operatar (s) I SNT Level Stey Vloragndov/
SCHC PaR Clrmimferential LwerLimit U crLimkit 2238 2958        =
N/A Kelly fluile I N/A 13-Mar05 SEnd Start End 0710 O 78 78 SCAR Centrtiir PaMetetn lacreent Asia Planned AcA Stan Axls Pavnedi lstni A Pesitional araieters Controller PeR LowerLimit 500 5C0 LowerLimit 178 2226 Bean Directiown TwdiAny Scan Radial Up Lmit 36615 36615 UpperLimit 3310 I 3478 TtansducerSic 1.00 Increment Ccummfercenta Incrementinterval 155 Dod4 e%of(tJverlp:
260t 2972 Lower WmIt U_ erLimit 9000 9000 9000 9000 Beam Diretion:
10 Mod Atomatic Sn ConectnCoats too CnversionC ts to0 NWunber of Snem 234 SnMoioan Bi-dredoioal Ccnmesieon its Degees Coiiversion Uenits ths Emd Roo Position:
Trtnsducer Sizn CAV/Ccw 1.00 g::i0 Increment                 Radial           Incrnermt tlrval               90                             DCI                     7                           Codea 9 of Ovart                     10 Mode:               Automnatic Scan       Conversont Ceunts             too                             Conversicon Count       100                         Number of Sums:                       9 ScanMotion:         Bi-directional       ConversionUnits               Enche                           Contversico Units       Degrees                     Head Roeae Patliont               0o00   on 0    0, Cxrertion                                     _       _             __       _     _     _     __      RAdius Tn.             t5A43                       Hoist (Pivat POint):               N/A Madulet arameters:                 09           Cnl33                                                       Calibradtio tReurds:   Euaminatlm Notes:
0.00 Corted. Detult _ aiues InL 8S.19 Hoist (Pivot Point): NtS Modual Parameters:
C .m.         Ao* i       Dalroeo           OScaonr.         eRf.-nMY.i                       WAT-33         Check for limitations due to the proximity I coonfiuration ofthe Channel I           On           55                               - 7.53(i)         1.05(in)                     0303301         outlet nozzle intl extension.                                                   0. _
OA Cal 34 Calibration Records: Examinato Notes-Status Annle Directian Sean Offiet Step Offset 'WAT-34 e__ Ick Efrlxnmitatlow, du to the prmrimity/)etwfi ofthe Channel I Off N/A N/A NtA NtA N/A outlet nozzie intern! extension.
Channel 2           on           55                               4 7.53(n)       - 1.05(in)                     003302 Channel 3           On         SLIC 40         (                 - 9.95(in)       2.87(in)                     0803303                                                                                   f 0r0 Channel 4           On         SLtC 40           +               + 9.95(in)       2.87(in                       0803304         Exzanmnatia Remarks-Chansel 5           On             OL           (+               - 10.56(in)         1.22in)                     0803305         No=zi Center [toist Position - 8398 (nel6               Off           NtA           NMA                   N/A           NtA                           N(A           Boom RotateNozzle Canter Position - 33s00                             r I        r Channel 7           O(f           NtA           NtA                   NtA           NA                             N/A           Limited examination due to the oximity of the outdet noznje Channel 8           Off           NIA           N/A                   N/A           NIA                             MNA           integra alexion                                                             -h      K Incremnent       S&%Sa P~sitioas Actual                         Recordable ladicatioug                                           Analp Remarksa Scan No.(s)       b           Position   I     _on_                               Yes,     }Nto     NIA Attedm         E N Stout               shi       tart IpoSti Sto       ChauuneW1    ~     0       ff        O 0Yes     2No 5-9           2596           2956           9_000         9W00 Clianndel2 Ci             Ei           Further Evaluation Channd 3 0         11       0   Required:
Channel 2 Off NtA N/A, NA NtA NA Channel 3 On SLIC 40 .-72 n) + 2.OD(in) 0803403 Channel 4 On SUC 40 -1.72 -200(n_ 0803404 Examinlatin Remarks: ChannelS On SIC40 + 1.72(in) + 0.0(a) 0S03405 NozzleCentetrHoist Psitiott-8398 Chaaneld6 Off N/A N/A NA N/A N'A Bo= Rotate NoozdeCenterPosition-33800 Chmnet7 OfL tiA N/A N/A N/A N/A Limited examintion.
                      =                                                     Csnc ei4 Cha4_              2       0       O Yes E       No Chann5el 0         0       Ei           Tape/CD No.:,
due to the proiit oftile outlet eaeint Off N/A NN/A A NIA WAce lnermneat  
______                                                   Channl 6 0         0       G             10AM Channei 7 0       0       2   Analysis TapelCD No:
& Sean Psitiott Actual Recordable Indications Analyst Remarks Scan No.(s) Inne Psition l Scan Psiton Yes No N/A  
_                                                                   Chaon nelBO        0     E               N/A A       IMrtSN 'L*VtI Dat:               .,-r tmeeoa. N.                                             \U
 
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief I-ISI-19 Attachments xam Number 105                                                               Page     I of 2 Watts Bar Unit 1 RPV-N15 Outlet Nozzle to Shell 0 336 Deg Cursor Box 1 of 1 Scan Axis                              90.76 - 92.93 Inc. Axis                               21.16 - 24.76 Depth In Material                       6.63 - 7.79 Channel 1 Module Coordinates Inc. Axis                               25.77   - 29.30 Scan Axis                              102.18 -   104.35 Channel 2 Module Coordinates Inc. Axis                              25.77 - 29.30 Scan Axis                              79.36 - 81.53 Channel 3 Module Coordinates 27.53 -
Inc. Axis Scan Axis                              101.13 - 103.30 Channel 4 Module Coordinates Inc. Axis                              27.53 -
Scan AXiS 80.41 - 82.58 Channel 5 Module Coordinates Inc. Axis                              25.77 - 29.30 Scan AXis                              97.81 - :00.01 Channel 5 Feature Anialysis                              Summary l      Comments No recordable indications chs 1, 2.
3, & 4.
:I
                                    ,_j.                             if,(aA            20c E4A-10
 
AftmIIII                                                              SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/lieat:     Wats Bar                                   WeldIdei.ttification: RPV-NIS                     wJe/RevIChjiCN!       lSwT-PDM-AUJT/O0/Il&2           Rxiamlasti. Na.:       1ed Pacet Na: 04-036e                                         wel Deed p:           Ouletl      bNo-to-h 338   Tlviee Ceonfiiratios: WAT-WALCON-0DI_
Mod.CmL. O/A                         _Sea                       Patb Drawing: SPNOZiJUT                         Eso Dte             Enuinattion Tim                 Surface Trnrentare F Data Acquisitiom Operatar (s) I SNT Level Stey Vloragndov/ N/A Kelly fluile I N/A                                 13-Mar05             SEnd                             Start             End O0710              78               78 P.
SCAR Centrtiir PaMetetn             lacreent Asia                 Planned                 AcA       Stan Axls             Pavnedi lstniA                        Pesitional araieters Controller                 PeR           LowerLimit                     500                 5C0         LowerLimit               178             2226       Bean Directiown           TwdiAny Scan                     Radial         Up Lmit                         36615               36615       UpperLimit             3310       I 3478           TtansducerSic                 1.00 Increment           Ccummfercenta       Incrementinterval               155                               Dod4                                                     e%of(tJverlp:               10 Mod                 Atomatic Sn         ConectnCoats                   too                               CnversionC       ts     to0                         NWunber of Snem               234 SnMoioan             Bi-dredoioal       Ccnmesieon its                 Degees                           Coiiversion Uenits     ths                           EmdRoo Position:             0.00 Corted.                   Detult _           aiues InL                   8S.19                                                                                   Hoist (Pivot Point):           NtS Modual Parameters:               OA           Cal 34                                                       Calibration Records: Examinato Notes-Status       Annle       Directian           Sean Offiet     Step Offset                       'WAT-34       Ick e__Efrlxnmitatlow, du to the prmrimity/)etwfi     ofthe Channel I           Off         N/A           N/A                     NtA           NtA                             N/A           outlet nozzie intern! extension.                                 0~
Channel 2           Off         NtA           N/A,                   NA             NtA                             NA Channel 3           On         SLIC 40           -72
                                                  .                      n)       + 2.OD(in)                       0803403 Channel 4           On         SUC 40           -                 1.72           - 200(n_                         0803404         Examinlatin Remarks:                                            Cl ChannelS            On        SIC40            +                  1.72(in)      + 0.0(a)                          0S03405        NozzleCentetrHoist Psitiott-8398 Chaaneld6            Off          N/A          N/A                    NA              N/A                              N'A          Bo= Rotate NoozdeCenterPosition-33800                          00 Chmnet7             OfL         tiA           N/A                     N/A           N/A                             N/A         Limited examintion. due to the proiit oftile outlet   eaeint Off         N/A           NN/A                     A           NIA                             WAce lnermneat & Sean Psitiott     Actual                         Recordable Indications                                             Analyst Remarks Scan No.(s)       Inne       Psition   l         Scan Psiton                     Yes     No       N/A  


==Attachment:==
==Attachment:==


&deg;4) SW Stop Star Ston Channel I 0 la a Yes (a No 1-233 500 36615 2226 3478 Chanel2 C] 0 [a Furthervaluatlito I _ Channcl 3 a 0 l Required:__ Channel4 0 la D 0 Yes El No.3_ .channel 0 Axdlhve TapeCD Na:.___E l_(a__ _aned6 10 A/B __ _ canel 7 0 o 2 A ralysis Tpe/CD No.: __Chnnoe S O 3 E N/AA Analyst/ SNTLeve Date: 13 lsr4a ptn tKs ia:. tiat)' V P.0~Cl 00 Ci 131MORIMN.
        &deg;4)         SW           Stop         Star             Ston     Channel I   0               la       a Yes (a No 1-233           500         36615         2226             3478     Chanel2     C]     0       [a Furthervaluatlito I     _     Channcl 3   a                 0l  Required:
UTr6 (.-c" I Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-4SI-19 Attachments
__                                                                   Channel4     0     la       D       0 Yes El No Ci
;xam Number 106 Watts Bar Unit 1 RPV-N15 Outlet Nozzle to Shell @ 338 Deg Page 1 of 1 Cursor Box 1 of 1 Scan Axis Inc. Axis Dep:b In Material Module Coordinates Inc. Axis Scan Axis 25.02 -26.26 36.00 -49.95 1.45 -2.01 Channel 3 35.49 -49.45 27.94 -29.18 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 38.75 -52.83 27.94 -29.18 Channel 5 36.24 -S:.69 25.54 -26.78 Channel 5 Summary No recordable indications chs 1, 2.& 3.Feature Analysis Comments Reviewed By $ l ) &deg;'oJJ -SNT Level Hi J, Date 1 3 ;rCA J cGo E4A-12 ISwT Examination Summary Record.rojed No: Tsunr 3ht No-Examination Ama: Reactor Pressure Vessel LlnelAssenbly:
                                        .                   .             channel       3_            0   Axdlhve TapeCD Na:
Nozzle to Shell Weld N-16 o Identiclatlom Outlet Nozzle at 2024dgrees T CD NOE Pnxndun Exam R E Re CtNFn Qw Nelh1d 1l .,Kh j l Nu neds Exinm b I L A nel t Record N2. R uem a AU IwT-P.AUT1RYO el AUTO ..AUTbrothdcness measurmenwonly, Enae*at fs N 22 A8UTSM4Ao X C B1 pofSom t fnh %V53 d wese knied due b nonh e el AUTSUC40 X C8 leiegreiX.nn e .tZ S1 AUT55T X -CS t$WT-05A11T41a 75-SQ AUT PAIG X -co REr.hkot pedoeed! nof.5&#xb6;el boe CD o Prepoed ay: j n* I 1.1: a IS9_ynN.:M A d ' 1 1-'r0 O&deg; .3017 4A 4 rM,,Z#9CD
                                            .___E       _aned6                                  l_(a__                 10 A/B                                 _
,db JU SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SilteJPht:
A
WatfsBar weld Ideptilcatko:
_  _         canel 7 0           o         2     ralysis Tpe/CD No.:     _
RPV-N16 Pr~Clkno; ISwT-PDI-AUT4/0/0/:
_Chnnoe    S O       3       E               N/AA Analyst/ SNTLeve         Date:                                                                                           13 ptn tKs ia:. tiat)'
PrejecNle.:
lsr4a                                          V 131MORIMN. UTr6 (.-c" I
04-0368 WYeld Dofrptie:
 
OiNoA 202f(5-45 DeviesConsllturatlba:
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
WAT-NOZCONX-001
Inservice Inspection Program Request for Relief 1-4SI-19 Attachments
___________
;xam Number 106                                                 Page    1 of  1 Watts Bar Unit 1 RPV-N15 Outlet Nozzle to Shell @ 338 Deg Cursor Box 1 of 1 Scan Axis                         25.02 - 26.26 Inc. Axis                         36.00 - 49.95 Dep:b In Material                  1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis                        35.49 - 49.45 Scan Axis                        27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis                         38.75 - 52.83 Scan Axis                        27.94 - 29.18 Channel 5 Module Coordinates Inc. Axis                        36.24 - S:.69 Scan Axis                        25.54 - 26.78 Channel 5 Feature Analysis                        Summary Comments No recordable indications chs 1, 2.
_75 Mod.ConsL 30 IScan Path Drawing: SPNOZOUT E xam Date lsad" Meet Tae SufacaTameratrF Data Acqnisition Operator (s)ISNT Level: Jesse L Dlgado, II Alan SchaeferINtA OS9rkZOO5 021t 02u4 1 0215 1 0224 76 1 76 Data Acquisition Scan Ceontroller Parameters Increment Ais PFamed Actual Scm Axis Pbnmned Actda] Positional parameters Controller PAR LowerLimit S5.42 85.42 LowerLimit 5.00 5.00 BeasDirectiom Twd Scan: Head Rotae Uper Limit 107.42 107.42 Upper Limit 65.00 65.00 Transducet Sie: 22mm x 45mmo Encremerut Boom Extend Incremant Inktnde 1.00 Rcsolution 0.20 Code %of Ovrlap NfA Mode: Automatic Scan Conversion Counts 100 Conversion Counts l00 Number of Scans: 23 Scan Motioen Bi-directional Conveesion Units Inches Conversion Units Degrees Doo Rotte Postionr 202.00 Counctium Default Radius IL. 14.50 Hoist G Noozzi CIL 83.98 Module Pwrametera:
                                  & 3.
30 Cal 201 Calibration Records: IEansleation Notes: S:.Ar-t D~r~it can Oeffd t-O "74.,-2 Chnotl Ot PAA16-L + 90.00(do + 00.0in 1200201 Chanael 2 Os PA16-A N + 90."tdcg)  
Reviewed By   $     l)   &deg;'oJJ   -           SNT Level HiJ, Date 13    J cGo
+ 0.00(1n) 1200201 Channed3 Off N/A N/A N/A N/A NtA Chanstl 4 Off N/A. N/A N/A N/A NMA Examination Remasrks: Channdl 6 Off N/A N/A NtA N/A N/A Chansel 6 Off N/A N/A NtA N/A N/A Channel 7 Off N/A NtA NMA NMA NtA CharnloS Off N/A WA M/A N/A I N/A ________________
                                                                            ;rCA E4A-12
Datn Analysis Increment  
 
& Sam Penitis Actual Recordable Indlestim A___ _ __R_ rks Scan No.(s) Incrntent Potition Scan Posiion Yes No N/A Atachment_Statt _ Sbo S stt Stop Cholncl I O 0 O Ycs E No 1-23 _85.42 107.42 5.00 65.00 Channel 2 0 E) 0 3 thiiertyvaluttion Ch Csnei3 [ o El RFeqetii Chumnel4 0 2 El _ Yes O No Channec 5 0 0 E Archie T DNu IClhuel 6 El C) 03 8_Channel 7 0 2 A hab'sis T No.:______CiomndS 0 0 ID N Analyt / SNT [Aver/Dlte l \ i 8 IloA tO"WOS ,". urnt 0' I 50 I'4 0 c2,2 CD9' b 1111 SQUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Siteftat:
ISwT Examination Summary Record
WaftiBar Weld Identiflution:
.rojed No:                                                                                                               Tsunr3ht        No-Examination Ama:       Reactor Pressure Vessel LlnelAssenbly:         Nozzle to Shell Weld N-16                             o Identiclatlom         Outlet Nozzle at 2024dgrees                           T                                                                       CD NOE             Pnxndun             Exam                 R   E       Re     CtNFn                                                   Qw Nelh1d               1l.,Kh j l       Nu neds   Exinm   b     I   L A nel Record t     N2.               R uema AU         IwT-P.AUT1RYO             el       AUTO       .   .                     AUTbrothdcness measurmenwonly, Enae*atfs N 22                     A8UTSM4Ao   X       CB1              pofSom t fnh %V53   d wese knied due b nonhe el     AUTSUC40     X       C8               leiegreiX.nn e                                             . tZ S1       AUT55T     X   -   CS t$WT-05A11T41a           75-SQ     AUTPAIG    X   -   co                 REr.hkot pedoeed!   nof.5&#xb6;el boe           CD o rM,,Z
RPV-N16 Pro/ReviChg/CNK; ISv-PDM-AUT410/O1/0 Elantee Na. 76 ModCouL: 30 Scan Path Dinyr SPNOZOUT Exam Datl Eanotitem Time _ SurfaTeOe Teerature F Date Aeqalitis Operator ()/STLevel:
                                                                                                                                              #9CD Prepoed ay:     j                                                   n*
JesseF Delgado/M Ala smhaefer/iN/A 0 02St9 l n s .tart FAd Dnta Acquliition Scn ControlleeParameters IncrenentAxi lanned Actual Sctan Axis Planned Actual PositionoalParaseters Controlier:
1.1:                         I a                     IS9_ynN.:M A                 d                                   '
PYR LowerLinit 35.42 S5.42 Lowerli-it 64.O 64.00 PCe= Direction:
1 1-'r0                         O&deg; .                   3017 4
Twd Scnn: HeadRtalte Uppalimit 107.42 107.42 UppLimit 125.04 125.04 TransduerSize:
4A
22mm x 45tm Inczement BoomExtend bInc t INtteval 1.00 Resolution 0.2U Code% ofOverlap:
 
N/A Mode: Autonstic Seen Conversion Conts 100 Conversion Counts 100 Nwaber of Scaw. 23 ScanMotion B-dirootional Convesion Units Indies Convesion Units Degrees BoovsRsftPouinow.
              ,db                                                   JU SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SilteJPht:   WatfsBar                                 weld Ideptilcatko: RPV-N16                     Pr~Clkno;                   ISwT-PDI-AUT4/0/0/:
202.00 Cunoetms:
PrejecNle.: 04-0368                                     WYeldDofrptie: OiNoA               202f(5-45 DeviesConsllturatlba: WAT-NOZCONX-001                 ___________                 _75 Mod.ConsL 30                                           IScan Path Drawing: SPNOZOUT                           Exam Date                       lsad" Tae Meet         SufacaTameratrF Data Acqnisition Operator (s)ISNT Level: Jesse L Dlgado, II             Alan SchaeferINtA                   OS9rkZOO5                 021t         02u4 1     0215   1   0224         76         1       76 Data Acquisition Scan Ceontroller Parameters         Increment Ais             PFamed                 Actual       Scm Axis                   Pbnmned           Actda]         Positional parameters Controller                 PAR           LowerLimit                 S5.42                 85.42       LowerLimit                     5.00           5.00   BeasDirectiom                     Twd Scan:                 Head Rotae           Uper Limit                 107.42               107.42     Upper Limit                   65.00           65.00 Transducet Sie:         22mm x 45mmo Encremerut           Boom Extend         Incremant Inktnde           1.00                             Rcsolution                   0.20                 Code %of Ovrlap                   NfA Mode:               Automatic Scan       Conversion Counts           100                               Conversion Counts             l00                   Number of Scans:                   23 Scan Motioen         Bi-directional     Conveesion Units           Inches                             Conversion Units             Degrees               Doo Rotte Postionr             202.00 Counctium                 Default                                                                       Radius IL.                   14.50                 Hoist G Noozzi CIL             83.98 Module Pwrametera:           30           Cal 201                                                       Calibration Records: IEansleation Notes:
Defasult F _iu _ IIL 14_50 _ufist i Noric CtL. B3.98 ModulParameters 30 Cal 201 Cilbrtioonecords Nxn toN titatn Angle Dpirection Seen Ofims' am Cairain eors 1 a-mn Channenl CIen SA16nL P ti t 900tatdcb)
S:.Ar-t           D~r~it             can Oeffd t-O                                     "74.,-2 Chnotl             Ot         PAA16-L                       + 90.00(do       + 00.0in                         1200201 Chanael 2         Os         PA16-A         N             + 90."tdcg)       + 0.00(1n)                         1200201 Channed3           Off           N/A         N/A                 N/A           N/A                               NtA Chanstl 4         Off           N/A.       N/A                 N/A           N/A                               NMA             Examination Remasrks:                                       '4 0 Channdl 6         Off           N/A         N/A                 NtA           N/A                               N/A Chansel 6           Off           N/A         N/A                 NtA           N/A                               N/A Channel 7           Off           N/A         NtA                 NMA           NMA                               NtA CharnloS           Off           N/A         WA                 M/A           N/A                 I             N/A               ________________
Indictin) 1200201 Citanne2 OSl 1'A16-S Sl _+ 90.S den_ +0 0 s 1200201 o ChCae3l 3 Off A NA N/A N/A e IA Cae 4 off N/A NIA N/A NiA IVA Examination Re0marke Channe 5 Off N/A _ /A N0A N 0A N/A Channel 6 Off NA N/A N/A N/A M0A Ch _i 7 off NMA N/A N/A N/A al VA _Channel 8 Off N/A _ NA/A _NiA NtA DATa Analysis Increment h Seam Positions Actul Recordable Indications Analyst Remartsb laoww"n Pcsition Seen rosiatin Yes No NMA Afttchnmet.
Datn Analysis c2,2 Increment & Sam Penitis Actual                               Recordable Indlestim                               _     __R_       A___    rks Scan No.(s)     Incrntent Potition             Scan Posiion                   Yes     No       N/A Atachment                                                                                          CD9'
Scan No.(t) Strt_ Stup Start Stm Channe I El to O3 Yes E3 No 1- 23 J5.42 107.42 t;4.00 125.04 Lbanndl 2 El El O FutherEvaluation
_Statt      _ Sbo           S           Stop stt       Cholncl I O                 O0              Ycs E No 1-23       _85.42           107.42       5.00         65.00     Channel 2 0         E)       30        thiiertyvaluttion Ch Csnei3 [         o         El   RFeqetii Chumnel4 0                   2El  _         Yes   O No Channec 5 0         0       E   Archie T       DNu IClhuel 6 El         C)       03               8
_Channd 3 0 0 Reqdred _ __ _Cbanncl4 0 o (R O Yes E No Channel 5 0 0 El Ardliv Tair.CD No..Cbnnct 6 0 0s la I ;-__ alnel 7 El 0 El AnamysisT. (aNo.skill t/na SW Oe IO Dat. t8 ) Iu )-u_MONT FRSl.~elDe VT1*I fi CD 0, 0 CD 0 C, to CO, CD CD CD 0 Gn 0 0-4 UQ OQ CD 11 C tz MII SOUTHWEST TECHNOLOGIES
_Channel 7 0                   2   hab'sis A          T         No.:
_ AUTOMATED ULTRASONIC EXOAMATION RECORD Site/Fiant:
______CiomndS                                     0             0 ID           N Analyt / SNT [Aver/Dlte             l\                     IloA                              i                             8 tO"WOS,". urnt 0'   50                            I                                                   I
Wat Bat Weld Identificeaon:
 
RPV-N16 i o/Rev'/ChXiCN:
b                                                     1111 SQUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Siteftat:       WaftiBar                                   Weld Identiflution: RPV-N16                   Pro/ReviChg/CNK;         ISv-PDM-AUT410/O1/0       Elantee Na.                 76 ModCouL: 30                                               Scan Path Dinyr       SPNOZOUT                       Exam Datl             Eanotitem Time         _   SurfaTeOe Teerature F Date Aeqalitis Operator ()/STLevel: JesseF Delgado/M Ala smhaefer/iN/A                                       0                         02St9 l       n           s.tart               FAd CD Dnta Acquliition Scn ControlleeParameters             IncrenentAxi                 lanned               Actual     Sctan Axis               Planned         Actual             PositionoalParaseters Controlier:                 PYR           LowerLinit                   35.42               S5.42       Lowerli-it               64.O           64.00     PCe= Direction:                   Twd Scnn:                   HeadRtalte       Uppalimit                   107.42               107.42     UppLimit                   125.04         125.04   TransduerSize:         22mm x 45tm               0, Inczement               BoomExtend         bInc t INtteval             1.00                             Resolution                 0.2U                     Code% ofOverlap:                   N/A           0 Mode:                 Autonstic Seen     Conversion Conts             100                             Conversion Counts         100                     Nwaber of Scaw.                     23         CD ScanMotion             B-dirootional     Convesion Units             Indies                           Convesion Units           Degrees                 BoovsRsftPouinow.               202.00 Cunoetms:                 Defasult                                                                     F       IIL
ISWT-PDI-AUr4/WliO E Eaminrb No.: 77 FrojectNe.:
_iu     _ufist
04-036 ~Wdd Darpto 0wtNcz-sb 2022 14- Devce Coafowtiwn:
_         14_50                         i Noric CtL.             B3.98           0 C, ModulParameters               30         Cal 201                                                       Cilbrtioonecords                       NxntoN titatn         Angle     Dpirection         Seen Ofims'     am                     Cairain eors             1   a-mn                                                                 to Channenl Citanne2 CIen OSl SA16nL 1'A16-S P   ti Sl      _+
WAI-NOZCON-0001 MNod.Cot:
t 900tatdcb) 90.S den_ +0 Indictin) 0 1200201 s
30 Stan Path Drwin. SPNOZOUT mum Date Examinatios Time S-rhS e TenperaturIF Data Acquisitio Operator (s) I SNT Level: laese tRDelgado I lI Alan Scheefer N/A 08 March 2005 0242 S2I E St6rt 76 Data Acquisition Scan Coatroller Parameten laocmemtAxi Planeed Actual Scan Axis Pla.ed Acetl] Poitional Parseers Contsoller.
1200201     o                                                                           CD CO, ChCae3l 3             Off             A         NA                   N/A           N/A                   e       IA Cae 4                 off         N/A         NIA                 N/A           NiA                             IVA           Examination Re0marke                                           CD CD 0 Channe 5             Off         N/A _           /A               N0A           N       0A                       N/A                                                                                   z Channel 6             Off         NA           N/A                 N/A           N/A                             M0A Ch       7        _i off           NMA         N/A                 N/A           N/A                     al       VA                                                           _
PaR Lower Limit 85.42 _ 85.42 Lower Limit 124.00 124.00 Beam Direction:
Channel 8             Off         N/A         _NA/A                             _NiA                               NtA                                                                             Gn  0 0-4 UQ  OQ DATa Analysis Increment h Seam Positions Actul                           Recordable Indications                                           Analyst Remartsb                                               CD laoww"n Pcsition               Seen rosiatin                   Yes   No       NMAAfttchnmet.                                                                                           11 C Scan No.(t)         Strt_         Stup         Start         Stm     Channe I       El to                 O3 Yes E3 No 1- 23           J5.42         107.42       t;4.00       125.04 Lbanndl 2 El           El     O FutherEvaluation
Twd Scm: Tfed Rotte Il i1.mit ;07.42 t07.4t Ttt Limit IRtt50 l s5.04- Tmnsdw Sir.: 22mm x45mm Incremnt Boom Extend increment Interval 1.00 Resolution 0.20 Code % of Overlap: N/A Mode Autonatic Scan Czwerslon Counts 100 Conversion Counts 100 Number of Scums 23 Scan Motion: B-141redional Conversion Units Inches Conyersion Units Dces B Roto Poniim 202.00 Corretone Delhit IusIn. 14.50 Hoist@ Nzle CIL. S3.9S Module Parsaeters 30 Cal 201 C l Records: Examinatiso Netes t..rt C. -*J t D:_ ._ ... S^Ir. e f... .Cbanael I On PA16-L t-) + 90e00(deg  
_Channd                                         3 0       0           Reqdred                                                                       _    _
+000:) 1260201 hnnel2 us PA1oS () + 9.00(deg + 0.00(io) 12t)02UI _Chanel 3 Olf V N/A N/ A N/ A NIA N Chanoel 4 Off V N/A NISIA N/A N/A Evsmniation Rfn2rks: Channed 5 Off NIA NIA N/A NIA N/A t hannel 6 Offi N/A NiA NIA N!A NMA Cheana 7 Off NA N/A N/A NIA NIA Ch16nel S Or WA/ N/A N1A N/A 1NdA D*ah Aas~is Increenent kScuuaoitloslsAcual  
_    _Cbanncl4                                     0       o       (R       O   Yes   E No Channel 5 0
._ Retordablelaiedstioiis AniysrtRemrhs hcnN~) ic-remdio~silion I Sa~nPosilion Yes No NIA Atlachmenct SnN~) Start 9e Stt Istop Channel I1 O I 13 0 [ Yes Gi No 1-Z23 85.42 107.42 124.00 185.04 Channel2C El 0 Furfitshevaluation
                                                                        .Cbnnct6 0 0
__Channe l30 073 El Reqditrd: Chommel 4Q U 0 o Yes o3 No _Cl chnoel63 0 0 i3Ardivet A-CNo.:_ _ .alond7 El O El Anal'ysis T p/No.:_l _ (hanneg El 0 O l 4 Anatyst/SNl Leved/Dtte: -g r h A o 2- G 0 mffvosur urn oo -PI (o : CD
0s El Ardliv Tair.CD No.
_-n MI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitelmant:
la I             ;-
WBttr We- Ide.titon:
tz
BPV-NI6 Prolltev ICN. [SWT-PDi-AUT4/U'00 Exmination No. 73 Pro ectNoJ 04-068 aidDetrt a: OtW 8b 202 (lW- DeviteCoxCe ur: WAT-NOZCON-0001 MediCoa.:
__                         alnel 7 El         0       El AnamysisT. (aNo.
30 Scae PtbhDT rl SPPNOZOUT Exam Dte Ezalntioae T-t- Srfce Tom tare 7 Data Acquisition Operator(s)
skill       IODat. SW                                    t/na       Oe                           t8)           Iu         )-u_
SNT Levl Jesse It. d AScefer N/A OtM2005 Start MaI Sart Eni 10254 0301 76 76 Dutb Acquisition Sam Coatrolter Parameters Incraeet Aiet Plannd e _ .sd Actual Positional Parameters Controller PaR LowerLimit 05.42 t5.42 ioerLinit 184.00 134.00 Bum Directionl Scan: Head llote Uperlimit 107.42 107.42 Lirnit 245.04 245.04 TmansducerSize:
MONTFRSl.~elDeVT1*I                                                                                                       fi
22mtt x45mm Mode Awnomatic Scan Convecrsio Coms 100 Convcrsion Cocme 100 Number ofScans: 23 Scan Motion: Bi-directional Convention Units inches Conovrsion Units Degves Boom Rfovte Position 202.00 Corr ctio: iiith I dius I.14.50 Hoist NozzleCL 03.9 Module Parameters:
 
30 Cal 201 Calibration Reords: lExamin tion Notes: e..- .. dm.ss c.... nir... step Off-et. =Channdl I on PAt6-L ( -I4 90D.0deg)  
MIISOUTHWEST TECHNOLOGIES
+ 0.00(i.) .1 200210 Chunnle2 On PA16-S ( )4 90oo0(dcg)  
_         AUTOMATED ULTRASONIC EXOAMATION RECORD Site/Fiant: Wat Bat                                           Weld Identificeaon:     RPV-N16                         i o/Rev'/ChXiCN:             ISWT-PDI-AUr4/WliO       EEaminrb No.:         77 FrojectNe.: 04-036                         ~Wdd                     Darpto           0wtNcz-sb 202214-               Devce Coafowtiwn:             WAI-NOZCON-0001 MNod.Cot: 30                                                 Stan Path Drwin.       SPNOZOUT                                 mum Date                 Examinatios Time         S-rhS e TenperaturIF Data Acquisitio Operator (s) I SNT Level: laese tRDelgado I lI Alan                   Scheefer N/A                         08 March 2005               S2I 0242         E           St6rt           76 Data Acquisition Scan Coatroller Parameten             laocmemtAxi                 Planeed                       Actual     Scan Axis                   Pla.ed           Acetl]         Poitional Parseers Contsoller.                   PaR             Lower Limit                   85.42             _         85.42       Lower Limit                   124.00         124.00   Beam Direction:             Twd Scm:                     Tfed Rotte         Il       i1.mit               ;07.42                     t07.4t       Ttt     Limit               IRtt50   l       s5.04- Tmnsdw Sir.:       22mm x45mm Incremnt               Boom Extend           increment Interval           1.00                                     Resolution                   0.20                   Code % of Overlap:           N/A Mode                   Autonatic Scan         Czwerslon Counts             100                                     Conversion Counts             100                     Number of Scums               23 Scan Motion:           B-141redional         Conversion Units             Inches                                   Conyersion Units             Dces                   B   Roto Poniim         202.00 Corretone                   Delhit                                                                                         IusIn.                 14.50                   Hoist@ Nzle CIL.           S3.9S Module Parsaeters               30           Cal 201                                                                 C l             Records: Examinatiso Netes                                           oo -
+ 0.00(in) ...1200201 ulanuel 3 otr NIA NtA NtA NMA NtA ..Channcl 4 Off NAt a NtA N/A NtA to NA Examinatin Remearks: ChoYl 5 _ Off N/A NA N/A N/A N/A Cbmmel 6 Off NM ntA NtA NtA NsA Chahmel 7 Or NtA IVA N/A NtA N/A annel t Off NtA NA NtA. N/A N/A o Dsh Analysis_Increment!  
t..rt                       t D:_     .         ...           e C.f...-*J . S^Ir.
&,Scar Positioms Actual Recordable Indications
Cbanael I hnnel2 On us t-)PA16-L PA1oS            ()
_Aatapt Reta rl Inocemn Poslionw Scan Position Yes No40 N/A Attacunen sca, No,($) Start Stop 9Stat Stop Chlinndl O Ei O1 O Yes El No J -23 85.42 107.42 1Y4.00 _245.04 Channel 2 0 _1 0l Further Evaluation
                                                                    + 90e00(deg
_ haiinel 3 El El U Required:.~~~2 0-_ *Cmel Yes El No Channel5 0 0 13 ArchiveS2  
                                                                    + 9.00(deg
/CDCNo.:_Canoel 6 0 0 9 I_____ ._ C__nn 7 O n AnalysisTpe/CDNo.:
                                                                                      +000:)
t _ _ _ _jae 0 01 I _ _ ?3 I M I r ___c______
                                                                                      + 0.00(io) 1260201 12t)02UI     _
Analyst ISNT Larval/Date;  
PI  (o Chanel 3             Olf           V     N/A               N/ A             N/A                           NIA                 N Chanoel 4           Off           V     N/A                 NISIA                       N/A                                   N/A             Evsmniation Rfn2rks:                                           CD Channed 5             Off           NIA           NIA                   N/A               NIA                                   N/A t hannel 6           Offi         N/A           NiA                   NIA               N!A                                   NMA Cheana   7           Off           NA             N/A                   N/A               NIA                                   NIA Ch16nel S             Or             WA/           N/A                   N1A               N/A                                   1NdA D*ah Aas~is Increenent     kScuuaoitloslsAcual           .     _         Retordablelaiedstioiis                                                         AniysrtRemrhs hcnN~)
-7,- o nw Fa i. r. an 55 L~9.K~rW om if. VT So I N)I IMi SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitNflant:
ic-remdio~silion       I         Sa~nPosilion                         Yes       No       NIA Atlachmenct SnN~)     Start         9e             Stt     Istop         Channel I1     O         I       13         0[ Yes     Gi No 1-Z23         85.42           107.42         124.00         185.04   Channel2C                 El       0     Furfitshevaluation
WtSBa Iedldden cal: RPV-N16 Pr jetNo.: 04-036S oldDat1: OiNzo-Sh 2t2 *2--3 Med.Co-L:
__Channe                                                 l30               073       El   Reqditrd:
30 ISc WPith Drawla. SPNOZOUT..1 .TwTLlLhTIAIT T /TA flfl ,.I Exaeshnatis No.: t WAT-NOZCON-0001 79-I-urfeeTemerature  
Chommel 4Q     U                   0           o Yes   o3 No             _
'F Data Acqbsition Opermtwr(s)  
Cl chnoel63           0         0   i3Ardivet       A-CNo.:
/ SN Level: JeateIL. Dolgado /l Alan Schaefer rINIA 08 Marc 2005 t.a.0D 0307 1 0320 _76 3.Data Acquisition Sesa Controller Parameters Coobntlo PoR sma: limd Rotate bncrient Doom Extend 44ode: Automatic Scan SCi Motion: li-directionsi
_                 _                 .               alond7       El         O         El   Anal'ysis T p/No.:
'-neomos Detita A -1 I-r- I.>Planned I Actual 85.42 ULo nrL it 107.42 UppaerLimit 24400 305.04 ICoversion CoUts ICamtsion Units 1.015 100 too Resolution Conversion Counts Conversion units nk;..1 0.20 100 Degrees, Positional Parameters Ieam Direction:
_l                                   _     (hanneg       El         0O          l           4 Anatyst/SNl     Leved/Dtte:-g                                                                                                                 r       h   A   o 2- G 0 mffvosur     urn
TVW rmnsducr Size: 22nm x 45mn Codeof Overlap: NIA Number of Scns 23 Bo ltohk Puctida: 202.00 lTois B Noic CfIf S3.90 I._ _1 _I ~lU I 4).=::-4b ET Cl imnnc 3 Off N/A X(A N/A 1VA N/A Zhsnnei 4 off WA N/A N/A N/A N/A 'Txamination Rtmarks: Chin(d 5 On1 N/A NA NIA NfA NWA Cbalmd 6 Off N/A NtA /A N/A N/A __ _annnd 7 Off N/A N/A N/A ttA N/A _Clnd F Off N/A NIA N/A NMA N/A Data Analysis Iacrament  
 
& Scam Pasitions Axtaal Recordable lIdlcutioas Analyst Remarks SCMNo.(s) l::crenr1t a Sl Position Yes No /A AttachmO e int N__ _ _ start ~ p Slta Sto Chasne I 0 ~0- 03 Yes 0 NtO 1-23 53A2 107.42 Z44.00 305.04 Channd 2 0 El 0 Funthecr Evaluatton
_-n                                                             MI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitelmant:       WBttr                                             We- Ide.titon: BPV-NI6                             Prolltev           ICN.   [SWT-PDi-AUT4/U'00         Exmination No.             73 Pro ectNoJ 04-068                                                                     a: OtW aidDetrt      8b 202 (lW-       DeviteCoxCe ur:           WAT-NOZCON-0001 MediCoa.: 30                                                       Scae PtbhDT rl           SPPNOZOUT                         Exam Dte             Ezalntioae T-t-             Srfce Tom       tare 7 Data Acquisition Operator(s) SNTLevl                    Jesse It.       d         AScefer         N/A                   OtM2005                 Start                       Sart                MaI Eni 10254           0301           76                 76 Sam Coatrolter Parameters Controller                    PaR Incraeet Aiet LowerLimit                   05.42 Dutb Acquisition t5.42 Plannd ioerLinit
_ Channel 3 0 n Rcquired: Channel4 o a 10 0 Yes 1 No Channel 5 0 0 CD Archive r No.:__ _ -nne7 0 0 E nalysiaT eCDNo.:= C= annel S 0 [1 E3 _ _ ___, Analyst / SNT Level / Date: ' l k , (A /acC t O O F O\k ~ J IF o t I .-,o o ww jo usts, UrF isn.U Z)  
_e
.IEM SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMIMNATION RECORD Site/plant:
                                                                                                                                                    .sd 184.00 Actual 134.00 Positional Parameters Bum Directionl 9.
Watts BSr Weld iendfiatlon:
Scan:                   Head llote                 Uperlimit                     107.42                 107.42               Lirnit           245.04         245.04   TmansducerSize:       22mtt x45mm Mode                   Awnomatic Scan             Convecrsio Coms               100                                 Convcrsion Cocme         100                     Number ofScans:                   23 Scan Motion:           Bi-directional             Convention Units             inches                                 Conovrsion Units         Degves                   Boom Rfovte Position           202.00 Corr ctio:                 iiith               I                                                                         dius I.14.50                                   Hoist NozzleCL                 03.9 Module Parameters:               30               Cal 201                                                               Calibration Reords: lExamin tion Notes:
RPV-N16 rro/Rev/Chr/ICN:
e..-       ..                 dm.ss       c.... nir...       step Off-et.                           =
ISwT-PD1-AUT4/0//0 Exarnination N.: S0 rojecttNo.:
Channdl I           on           PAt6-L                 (                 90D.0deg)
04-0368 WelDescariptilet OszNoo-Shb20 (304: IteviceCou gurades: WAT-NOZCON-00I
                                                                          -I4                + 0.00(i.)         .               1200210 Chunnle2             On           PA16-S                 (               )490oo0(dcg)       + 0.00(in)           .             1200201 ulanuel 3           otr               NIA     NtA                           NtA             NMA                                   NtA . .
_o Med.Conf:
Channcl 4             Off             NAt           NtA a                   N/A             NtA         to                       NA         Examinatin Remearks:
30 Scan Path Drawler. SPNOZOUT Exann Date Exzaminaiino Thee Surface Terntare F Data Acquisition Operator (s) I SNT level: Jess R. DlgadoD 111 Alan Sechaser / N/A 0eMu 2005 Start I Rod S., l Ynd 0324 033 Data Acquisitiont Searn Controller Parametere Ie t Avis lnaed I Actual Stan Axis P d Actual Positional Parameters Controller PaR LoveeLint o5.42 o542 Lowerrimt 304.00 30.00 Beam Diretion:
ChoYl 5 _             Off             N/A             NA                     N/A             N/A                                   N/A Cbmmel 6             Off             NM                                     NtA      ntA NtA                                     NsA Chahmel 7             Or               NtA           IVA                     N/A             NtA                                   N/A annel t           Off               NtA           NA                     NtA.           N/A                                   N/A     o Dsh Analysis
Twd Scan: Head Rotate LISt 107.42 107.42 UpperLimit 366.00 366.00 TrmkrAu Sbz= 22aun x 45mnn Increment Boom Fxtend Increasat Intrval 1.00 Resolution 0.20 Code % o Overlap: NIA Mode Automatic Scan ConversionCounts 100 Convesinn Counts 100 Namber ofScans: 23 Scan Motiow: Bi-directional Converion Units Indies Conversion Units Degrees jBouRtte Poaitw 20200 C ior: Deut Raus n. 14S50 Hoist @ Nozzle C/L 83.98 ModalePradetrs:
_Increment! &,Scar Positioms Actual                                     Recordable Indications       _Aatapt                                         Reta rl Inocemn Poslionw                     Scan Position                       Yes     No40   N/A Attacunen sca, No,($)         Start             Stop           9Stat         Stop       Chlinndl     O       Ei       O1         O Yes       El No J - 23         85.42             107.42         1Y4.00     _245.04       Channel 2     0   _1           0l   Further Evaluation
30 Cal 201 CalibrationRcords:
_                                               haiinel 3   El     El       U     Required:
IExaminatiob Notes: Mass ^roaM tie 5550 (Rn 1n Channel Un PAWL (1 + Y90.0(dsm t 0.00Ain) 12W0201 Clatanel 2 On PA16-S 1) + 90.00(dedt  
                                                    .~~~2               *Cmel                                                0-_ Yes El No Channel5     0       0         13   ArchiveS2 /CDCNo.:
+ 0.00(in) Q200201 Channel 3 Off NIA WiA N/A N/A N/A _Clianndl 4 ofr N/A ?IA N/A NtA NIA Fxminstte Remarks: Chnal 5 Off NMA IVA N1A N/A NIA C3bannd 6 Off NMA WA N/A N/A N/A Chuand 7 Off N/A N/A N/A N/A _N/A Channnd t Off NiA N/A NIA tVA N/A I Data Atutlyss incemaent  
_Canoel 6     0       0         9   I__
& Sam I>VitlVn Act" eodbeIdctln nls eak Scaneomma s Psition I SarsPosition Yes No NIA Attadhmne Scno() Stalrt- Stopw Start stop cWmmw I O 173 01 O YeS El No 1-23 S5,42 107.42 30-4.W0 366.00 ahannel2 01 pi=[ FurthecrEvaluation Chanl 3 O ri El Requivad: Channel 4 0 0] el oDYei El lNo C-hanndS O: n El ArhsTt d No.:_ tanow6 El 0i 0l 1cluhl 7 0 n 1A0sT~/DN.
___                          .                     _           C__nn 7       O       n             AnalysisTpe/CDNo.: t                 _             _           _         _
Analysit ISNT Lvl / Dt Xl){t~e J@r6\t ISVI tvitM ft VT n aw am?*0 .l~20 -t CD CD.
jae            0       01I                        ?3 Ir M     I __          ___c______
MIll SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:
Analyst ISNT Larval/Date;                                                                                       -7,-                                                     o nw   55Fa  i. r. an                                                                     L~
Watb Bar lWeld idestifisetion:
K~rW om   if. VT So I   N)                                                                                                           I
RV-N16 Prmofw"2e1CN:
 
MSwT-PDI-AUIJII/OI/I2 8isiNi.: 81 Prect N&.: 04-0368 Weld Descrifee:
IMi SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD                                                                       .
Outlet Noz-to-Sh (i202 Devke Coulpr.ratioo:
1          .
WAT-WALCON-0t0.
TwTLlLhTIAIT    T  flfl
Mgd.CL 09 19ca Path Drawler, SPNOZOUT I EUN Dute ExaIrmiation Time I Sarfue Tern tare IF Data Acqmbitln Opera s) I SWN fTI: Drid f 12-Mar-0S Start End Start I End 1319 1326 75 78 Sc.n CostroelerParameters fIcremtArk Planed Actual Sea Ax Planned cAl Positionalpawmeters Controller:
                                                                                                                                                              /TA SitNflant:       WtSBa                                     Iedldden cal: RPV-N16                                                 ,.
PiR Lowilimit 2238 2594 Lower Umit 9000 9000 Bean Direction:
I Exaeshnatis No.:            79 Pr jetNo.: 04-036S                                             oldDat1: OiNzo-Sh 2t2                   *2--3                           t WAT-NOZCON-0001 Med.Co-L: 30                                               ISc WPith   Drawla. SPNOZOUT                                                 -I-                                       urfeeTemerature 'F Data Acqbsition Opermtwr(s) / SN Level: JeateIL. Dolgado /l                   Alan Schaefer rINIA                                                                                     t.a.               0D 08 Marc 2005 Sesa Controller Parameters Coobntlo                     PoR Data Acquisition A -1 85.42 I-r- I.>
Cw/Ccw Sc Circnuferential Upper Limit 2958 _ 2955 Upper ialit 9000 9000 Transducer Size: 1.00 Inanlsent Radial hincssent kstsrl 90 DcI 7 CO- %ofOverlapI 10 Mode Automatic San Conversion Cots too Conrsion Counts too Nurnber of Ssor. 9 ScanMotins:
ULo nrL it Planned 0307 I
Bi-direstld Co sikUnludts InCdes CnvesionUnits Degree HesdRoatePositon 0.00 Correctione Defknlt __ _ _ __85.43 Hoist (PiotPoint):
1    0320 Actual 24400
NIA MIodule Parameters; i Ca 33 Caition Records: Exaosaiatinn Notes;Status Anple Directi Sen a Offset Step Offset WAT-33 ICheck for limitations due to the proximity/
_        76 Positional Parameters Ieam Direction:                  TVW 3.
configuratios ofthe Cmastiel 1 On SS -7.53( al 1.05tin) 0803301 Outlei nozke Integral extension.
sma:                      limd Rotate                                                            107.42     UppaerLimit                                     305.04       rmnsducr Size:          22nm x 45mn        I bncrient                Doom Extend                                        1.015                           Resolution                     0.20                           Codeof Overlap:                  NIA      .
Channel 2 Oil 55 + + 7.53(iht -105(in 0803302 Chlmol 3 On SUC 40 --995(in -2.87inj 0803303 Cituisel 4 On SLiC 40 + 9.95(in -2.87in) 0803304 Examninatin Rensarlrs Channel S On OL + -10.56(in)  
44ode:                 Automatic Scan          ICoversion CoUts            100                              Conversion Counts              100                            Number of Scns                   23 too SCi Motion:              li-directionsi      ICamtsion Units                                              Conversionunits                Degrees,                      Bo ltohk Puctida:             202.00 nk;..1
-1.22(in 0803305 Nozzle Center Hoist Posidiot-8398 Channel 6 Off W/A N/A NI/A 1A N/A Bouus Rutats NMez Castor Pusitions-20200 Channel 7 Off NA N/A N/A N/A WA Limited exaninstiont due to the Proxirnir of h outile munozh Channel S Off NA N/A N/A NIA N/A inse extenin.n_ Icrement A Scan Poitions Actual Recordable Indications Anast Renart San -N ) ne sitirn -S=cn Position Yen No N// Attadhnsent._
'-neomos                    Detita
Start Stop Start Stop ChasdelO 1;1 M 0 i [Yes 13 No 5 -9 2594 2955 9(00 9000 Clsamet 2 0 2 E3 Further Evaluation
_  _1_I                                                                  I    ~lU               4)                           lTois B Noic CfIf
___ _Channel3 0 IZ Re2quireds Chad 40 IB 2a O Ye l No__ Cal 5Oe 0 la Archhve TapCD No..Channel6F-0 13 ARA/i._ Channe 7 C0 2 Ajneysis Tape/CD No.: _Analyst / SI Icvel / Date! ! 1 Us IBMt FOM t.. 111ro5 te.65A2 on 0/ 0 Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request fir Relief 1-ISI-19 Attachments
                                                                                                                                                                          . =::
~xam Number 82 Page 1 of 2 Watts Bar unit I RPV-N16 Outlet Nozzle to Shell @ 202 Deg Cursor Box I of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 90.76 -92.93 21.16 -24.76 4.17 -5.33 Channel 1 25.83 -29.39 99.80 -101.97 Module Coordinates Inc. Axis Scan Axis Channel 2 25.83 -29.39 81.74 -83.91 Channel 3 27.60 -99.80 -101.97 Module Inc.Scan Coordinates Axis AXiS Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scar Axis Channel 4 27.60 -81.74 -83.91 Channel 5 25.83 -29.39 97.84 -100.01 Feature Analysis Comments Channel 5 Summary No recox 3, & A.'' tabA>-dable indic;ILO ations chs 1. 2, iZ Al1tcA j ; ; i I : I r ;i If ;1f i It 1 , i j , I , 1;I I I F E4A-21 I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD..U*-ut Wvth a S m: I lSwT-PDI.AUtl/Q0/!1q2I Ioa: WAT-WAICON-t510 ExamIatton No.: 32 Proli-t Non- 0-03 Outlet Noto-Sh Q 202__. ... .g ,._z__ ........ _ _._ _Mod.ConE:
S3.90
OoA n.f.E71-1-0 TO.-Sarre Tempeatere F v. o ww I-Dat. Avquiletiea Operate, (.) / SW Level: Caorles 1 Barrna I l Kally~algle I N/A c_- I r_ -E ir 0740 024 Axis Planed ctal_-__I 78 1 78 Start l End Scan Controller Param~eters Controlla.
                                                                                                                                                                                                                -4b ET imnnc   3         Off             N/A           X(A                 N/A           1VA                                 N/A Zhsnnei 4         off             WA           N/A                 N/A           N/A                               N/A               'Txamination Rtmarks:                                               Cl Chin(d   5         On1             N/A           NA                   NIA           NfA                                 NWA Cbalmd   6         Off             N/A           NtA                   /A         N/A                                 N/A                                         __                   _
?aR kaw. Radrial brncement:
annnd  7         Off             N/A           N/A                 N/A           ttA                                 N/A                 _
circunoferential tdode: Automatic Sca..Scan fotlow BI-dircetlonal r5~ta-h increment Axis Planned I Actual Lower Limit _ SD I 500 UpUerLimit 36615 1 36615 Increment Intervai Conversion Conts Conversion Units 155 Ioo Degrees DC! 4 Convvoi Counts 100 Conversion Units Innies Positioeal Parametern BDen Direction:
Clnd      F         Off             N/A           NIA                 N/A           NMA                                 N/A Data Analysis Iacrament & Scam Pasitions Axtaal                             Recordable lIdlcutioas                                                   Analyst Remarks SCMNo.(s)           l::crenr1t Position                                             Yes     No       /A AttachmO
Twd/Awy Transducer Size: 1.00 Code % of Overlapr to Number of Seon: 234 Heat Rotate PositIon:
__ _ _ start         ~a p
0.00 Hoist (Pivot Pont)l N/A lUUlltJ I ]11. 6z.4 Module Parameters:
Sl Slta         Sto       Chasne I 0                   ~0-           e 03Yes 0 NtO int N 1-23           53A2           107.42       Z44.00       305.04     Channd 2   0       El     0 Funthecr Evaluatton
Cas Cal 34 N Calibration Rceords: lxawtdi Status Antie Chan.el I ONf N/A Direction Scnn Offset Step Offset WAT-34 Chedc for limitation dis outi nozzle integral all e Proximity tnofdthe NtA N/A N/A N/A Chl2 Off NWA N/A NA N/A W/A Caond 2 3 On SC 40 t (A) -I1.70n) + 2.00(n) 0803403 Channel4 On SLIC40 (-1 -1.72(m) -200(in) 0803404 Chasmel 5 On SLXC 4 (+) -I.72(in) + 000 (in) 0803405 Channe 6 Off N/A N/A N/A N/A NtA Chanmel 7 Off N/A NA NtA NtA N/A co,0 CiOD CD S Nozde Boom Rotte Centerilne
_             Channel 3 0       n           Rcquired:
-20200 uusozl l Oif N/A W/A WA N/A NA U lurv I E xanmination due to the ronity of the oudet nozzle hai Analyst Resnarks A Sea, Pk tin., Actual Increment Position Scan Noa(s) Start I sto 1 -233 500 j 36615 -_3478 Cheanel 2 0 [ 2 Chamnel 3 13 l2 0 Chunmel 4 0 E 0 (ahonel5 a (a _ 2 Chnnr 6 e13 El l a Yea X No Further Evaluation Required: Fl Yes 1 NMo.-. i:- I.Ardlivo TapedC No.: 10 A/B= =lChanel 7 0 01 El_ _ = =AnalyolaTape/CD No.: N/A WCannels 0 0 El knnlystl SN'r Level / Date. 'k- IS] : 1 3 -j r e- k Z o "-- 5---rryzlson.
Channel4 o         a       10 0           Yes     1     No Channel 5 0         0       CD Archive           r     No.:
UT0 inm.990, Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice inspection Program Request for Relief I-ISI-19 Attachments rcam Number 82 Watts Bar Unit 1 RPV-NlG Outlet Nozzle to Shell @ 202 Deg Page 1 of 1 Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 25.02 -26.26 36.00 -49.95 1.45 -2.01 Channel 3 34.94 -48.40 27.94 -29.18 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 38.1C -51.49 27.94 -29.18 Channel S 36.00 -51.02 25.54 -26.78 Channel 5 Summary No recordable indications chs 1, 2,& 3.Feature Analysis Comments-------------------- ---------- ----------------------Reviewed BySNT Level _l_ Date 13 jrci200S E4A-23 ISwT Examination Summary Record PrJ.d N.: _' _ ySbh No.368 Watts Bar Nudear Plant Unit 1 300016 Esarnatson Area: Reactor Pressure Vessel LlnelAasunbly:
__   _ -nne7                 0               E0      nalysiaT eCDNo.:
Nozzle to Shell Weld N-17 Identflicatloo:
                                                    =                       C=
Outlet Nozzle at 15Wegrees T N H Not oC Cxum a c P..i Cr M~ R5YJacN Nw1 Efxam An*gl I 8 Anfalyt Record No Refflrn AUT IST-P0G-MIk1T5 7 AUTO --AUTO for 04clw. osummenf el Ewondos ICN 2 74 AUTSUC40 X
annel S   0     [1     E3                                     __            ___,
* Co perFom rn f eooel shell s rwe ImIted due to boE 73 AUT SLIC4Ot X -CB iotal Oe 72 AUTSnt X -Ce LSOwPOIAUT4110 e 7-77 AUT PAIS X -Ce r l b r ms performed tow. noie bo.P,.prdBy:
Analyst / SNT Level / Date:'             l                               k       ,                                 (A         /acC                 t OO    F IF        O\k     ~J I                                 ot              .-             ,o o ww   jo usts, UrF isn.U   Z)
bD.t IPgeg Suffna.y No: 13-Mar-05 I OFI 300016 0.EOo d- 5. _'E-CD' DE 0 0 Do.I AA"ZC1
 
,,I1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATIlON RECORD Site'Plant:
                                                                      .IEMSOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMIMNATION RECORD Site/plant:     Watts BSr                               Weld iendfiatlon: RPV-N16                     rro/Rev/Chr/ICN:         ISwT-PD1-AUT4/0//0             Exarnination N.:           S0 rojecttNo.:     04-0368                                 WelDescariptilet     OszNoo-Shb20       (304: IteviceCou   gurades:   WAT-NOZCON-00I                 _o Med.Conf: 30                                             Scan Path Drawler. SPNOZOUT                         Exann Date             Exzaminaiino Thee               Surface Terntare F Data Acquisition Operator (s) I SNT level: Jess R. DlgadoD         111 Alan Sechaser / N/A                 0eMu 2005               Start I       Rod             S., l             Ynd 0324           033 Data Acquisitiont SearnController Parametere           Ie       t Avis           lnaed           I   Actual     Stan Axis               P     d           Actual             Positional Parameters Controller                   PaR           LoveeLint                 o5.42                 o542       Lowerrimt                 304.00           30.00       BeamDiretion:                   Twd Scan:                   Head Rotate             LISt                 107.42               107.42     UpperLimit               366.00           366.00     TrmkrAu Sbz=           22aun x 45mnn   *0 .
WatsBar Wld Identification:
Increment               Boom Fxtend       Increasat Intrval         1.00                             Resolution               0.20                         Code %o Overlap:                 NIA Mode                   Automatic Scan       ConversionCounts           100                             Convesinn Counts           100                         Namber ofScans:                   23 Scan Motiow:             Bi-directional     Converion Units           Indies                           Conversion Units         Degrees                     jBouRtte Poaitw                 20200 C ior:                     Deut                                                                       Raus n.                   14S50                       Hoist @ Nozzle C/L             83.98 ModalePradetrs:                 30           Cal 201                                                     CalibrationRcords: IExaminatiob Notes:
gPV-NI7 PriRrv/ZICbpCN_
tie 5550 Mass (Rn           ^roaM    1n Channel               Un         PAWL           (1           + Y90.0(dsm       t 0.00Ain)                     12W0201                                                                             l~20  -t Clatanel 2 Channel 3 On Off PA16-S NIA 1)
ISwT4-D[-AUT4/0/0 I6 PrajectNo.:
WiA
04-0365 Melda t n i 5 cNExamnatina No: 67 Md.Cotf.:
                                                              + 90.00(dedt N/A
30 Scv9" Pail Dra-tur. SPNOZOUT Exm Date Examination Time Surface Tm9er F Data Acquisition Operator (sJ ISNT Level: P.R. Rlein ja ItR 07 March 2005 Ssrt0 I Ed l d[ 1703 1 1755 7fi 1 76 Data Acquisition Scan Coatroller varaaetsm Increment Axsk rimed Actual Sm Axis Planned Actual Positiona]
                                                                                + 0.00(in)
Parameters Controller PaRt LowerLinit 8542 85.42 LowerLinmit 5.00 5.00 Beamn Direction:
N/A Q200201 N/A                                                                   _
Twd Scam HeadRotate U Untit 107.42 107.42 UnerLUnit 65.00 1 65.00 Transducer Size; 22rmm x 45mn Incrvamet Boom uExind Inccae Inaiterval 1.00 RcwbZluiin 0.20 Code % of OerbTp: NtA Mode: AutwonaicSecn m Conversion Counts 100 Conversion Counts 100 NIuberofScaw.
CD  CD.
23 Scan Motion Bi-directional CouversioAUnits Inches Convrsion Units Deg-e mom Rotate Posiioe 158.00 Co Def/ult Rdius n. , 14.50 Hoist @ NozzleC/L S3.91 ModulekParameters:
Clianndl 4           ofr           N/A         ?IA               N/A           NtA                             NIA             Fxminstte Remarks:
30 C 1201 CalibratiouRecords:
Chnal 5               Off           NMA         IVA               N1A           N/A                             NIA C3bannd 6             Off           NMA         WA               N/A           N/A                             N/A Chuand7              Off           N/A         N/A               N/A           N/A                           _N/A Channnd   t           Off           NiA         N/A               NIA           tVA                             N/A           I Data Atutlyss incemaent & Sam I>VitlVn Act"                               eodbeIdctln                                                         nls     eak Scaneomma s         Psition   I       SarsPosition                 Yes     No     NIA Attadhmne Scno()Stalrt- Stopw                 Start       stop     cWmmw I O           173     01       O YeS   El No 1-23             S5,42         107.42     30-4.W0     366.00   ahannel2   01     pi=[         FurthecrEvaluation Chanl 3     O       ri       El   Requivad:
isxamination Notes: IRaI.. Aaale. Dklrinav Sean Offst Ste" Offst WAT-20 I Chassell t O PA16-L 1- L 90.00t d + 0,0n) 1200201 Cbhnad2 On PAI6-S -+ 90.00(d + 0.00in ) 1200201 Chanmdl3 Off N/A N'A N/A NA _ N/A Cbannd4 Off N/A N/A N/A N/A N/A FxsmiaatieafnRemarlc Clanumd 5 Off NA N!A N/A NIA N/A saicftcl Qff_ N/A _ N_/A NiA _NA N/A td 7 01! N/A NtA N/A N/A N/A CIsdc8 Off N/A WA N/A N/A N/A Data Analysis Inceeat
Channel 4 0         0]       el       oDYei El lNo C-hanndS O:         n       El ArhsTt d             No.:
* Sem Positions Acuaal Recordable Dodicatto
_     tanow6 El           0i     0l 1cluhl 7 0         n         1A0sT~/DN.
_ Analyst Remarks SI' _ nc entPosition Scen"8sition Yes No N/A  
Analysit ISNT Lvl / Dt Xl){t~e                                                               J@r6\t ISVI tvitM ft VT n aw am?
 
MIll SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant: Watb Bar                                 lWeld idestifisetion: RV-N16                     Prmofw"2e1CN:           MSwT-PDI-AUIJII/OI/I2                                   81 8isiNi.:
Prect N&.: 04-0368                                     Weld Descrifee: Outlet Noz-to-Sh (i202           Devke Coulpr.ratioo: WAT-WALCON-0t0.
Mgd.CL 09                                             19caPath Drawler, SPNOZOUT                     I     EUN Dute             ExaIrmiation Time       I       Sarfue Tern     tare IF Data Acqmbitln Opera           s) I SWN   fTI:Drid                   f                                       12-Mar-0S           Start         End               Start       I       End 1319           1326               75                 78 Sc.n CostroelerParameters         fIcremtArk                 Planed                   Actual     Sea Ax               Planned             cAl               Positionalpawmeters Controller:               PiR           Lowilimit                   2238                   2594       Lower Umit             9000           9000         Bean Direction:                 Cw/Ccw Sc                 Circnuferential     Upper Limit                 2958         _       2955         Upper ialit             9000           9000       Transducer Size:                   1.00 Inanlsent               Radial         hincssent kstsrl             90                                 DcI                     7                           CO- %ofOverlapI                       10 Mode               Automatic San       Conversion Cots               too                               Conrsion Counts         too                         Nurnber of Ssor.                       9 ScanMotins:         Bi-direstld       Co sikUnludts                 InCdes                           CnvesionUnits           Degree                     HesdRoatePositon                   0.00 Correctione             Defknlt       __         _                                                                                                                                               on
_     __85.43                                                                                   Hoist (PiotPoint):                 NIA MIodule Parameters;               i       Ca 33                                                       Caition Records: Exaosaiatinn Notes; Status         Anple     Directi         Sen a Offset     Step Offset                       WAT-33         ICheck forlimitations due to the proximity/ configuratios ofthe Cmastiel 1         On             SS                         - 7.53( al         1.05tin)                       0803301         Outleinozke Integral extension.
Channel 2         Oil           55         +               + 7.53(iht       - 105(in                         0803302 Chlmol 3           On         SUC 40         -             - 995(in         - 2.87inj                       0803303 Cituisel 4                                                                                                                                                                                           0/ 0 On         SLiC 40         +               9.95(in       - 2.87in)                       0803304         Examninatin Rensarlrs Channel S         On             OL         +             - 10.56(in)       - 1.22(in                       0803305         Nozzle Center Hoist Posidiot- 8398 Channel 6         Off           W/A       N/A                 NI/A           1A                               N/A           Bouus Rutats NMez Castor Pusitions- 20200 Channel 7         Off           NA         N/A                   N/A           N/A                             WA           Limited exaninstiont due to the Proxirnir of h outilemunozh Channel S         Off           NA         N/A                   N/A           NIA                             N/A           inse extenin.
Icrement n_         A Scan Poitions Actual                         Recordable Indications                                           AnastRenart San N     )   -        ne sitirn       -       S=cnPosition                    Yen     No       N// Attadhnsent._
Start         Stop       Start       Stop       ChasdelO           1;1 M       0i      [Yes 13 No 5-9         2594           2955       9(00         9000       Clsamet 2 0           2 E3       Further Evaluation                                   ___                _
Channel3 0         IZ           Re2quireds Chad 40             IB 2a             O Ye l       No
__        Cal 5Oe           0       la Archhve TapCD No..
Channel6F- 0                 13             ARA/i
                            . _                                   Channe 7 C0                 2   Ajneysis Tape/CD No.:         _
Analyst / SI Icvel / Date!!     1                                                                                                         Us IBMt FOM t..111ro5te.65A2
 
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request fir Relief 1-ISI-19 Attachments
~xam Number 82                                                 Page   1 of 2 Watts Bar unit I RPV-N16 Outlet Nozzle to Shell @ 202 Deg Cursor Box I of 1 Scan Axis                       90.76 - 92.93 Inc. Axis                        21.16 - 24.76 Depth In Material                  4.17 - 5.33 Channel 1 Module Coordinates Inc. Axis                        25.83 - 29.39 Scan Axis                        99.80 - 101.97 Channel 2 Module Coordinates Inc. Axis                       25.83 - 29.39 Scan Axis                        81.74 - 83.91 Channel 3 Module Coordinates Inc. Axis                        27.60 -
Scan AXiS                        99.80 - 101.97 Channel 4 Module Coordinates Inc. Axis                       27.60 -
Scan Axis                        81.74 - 83.91 Channel 5 Module Coordinates Inc. Axis                        25.83 - 29.39 Scar Axis                        97.84 - 100.01 Channel 5 Feature Analysis                       Summary Comments No recox-dable indic;ations chs 1. 2, 3, & A.                                        j; ; i I : I   r ;
i     If ;
1f     i       I
:  t    1, i j , I, 1;
                ''tabA>                                                      I       I I                 F ILO        iZ Al1tcA E4A-21
 
I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD                                                                     .
lSwT-PDI.AUtl/Q0/!1q2I Wvth a U*-ut                                                          m:                                               I S                                                                                                                                                                              ExamIatton No.:           32 Proli-t Non- 0-03                                                               Outlet Noto-Sh Q 202                          Ioa: WAT-WAICON-t510
__. ...   . g ,._z__ ........ _ _.
Mod.ConE: OoA                                                                                                             n.f.                 E71-1-0             TO.-             Sarre Tempeatere       F
: v.             o         ww   r_ -
I-Dat. Avquiletiea Operate, (.) / SW Level: Caorles         1 Barrna I       l Kally~algle I N/A                                                 c_-         I Start l    End 0740               024                 78           1     78 E
Scan Controller Param~eters ir increment Axis             Planned           I       Actual         Axis                  Planed                    ctal I
Positioeal Parametern Controlla.                  ?aR            Lower Limit       _         SD               I   500                                                                             BDen Direction:             Twd/Awy kaw.                Radrial        UpUerLimit                  36615            1    36615                                                                          Transducer Size:                 1.00 brncement:          circunoferential      Increment Intervai          155                                  DC!                          4                                  Code % of Overlapr                 to co,0 tdode:               Automatic Sca..      Conversion Conts            Ioo                                  Convvoi Counts              100                                Number of Seon:                  234 Scan fotlow          BI-dircetlonal      Conversion Units            Degrees                              Conversion Units            Innies                              Heat Rotate PositIon:           0.00 r5~ta-h          lUUlltJ I ]11.
6z.4                                                                                                  Hoist (Pivot Pont)l               N/A Module Parameters:                 Cas         Cal 34 N                                                       Calibration Rceords: lxawtdi Status         Antie       Direction        Scnn Offset       Step Offset                         WAT-34               Chedc for limitation dis                   e Proximity           tnofdthe Chan.el I            ONf          N/A          NtA                 N/A             N/A                               N/A               outi nozzle integral all Chl2           Off           NWA         N/A                 NA               N/A                               W/A Caond 2   3         On         SC 40           (A) t            - I1.70n)         + 2.00(n)                         0803403 Channel4             On         SLIC40         (-1             - 1.72(m)         - 200(in)                         0803404 Chasmel 5           On         SLXC4            (+)           - I.72(in)         + 000 (in)                         0803405                                                                                           CiOD Channe 6             Off           N/A         N/A                 N/A             N/A                               NtA               Nozde Boom Rotte Centerilne - 20200 CD S Chanmel 7           Off           N/A         NA                   NtA             NtA                               N/A                             xanmination due to the ronity ofthe oudet nozzle hai uusozl l         Oif           N/A           W/A                 WA               N/A                               NA U
lurv           ASea,   Pk tin., Actual E                                Analyst Resnarks Increment Position Scan Noa(s)       Start     I sto                                 I a Yea X No 1-233           500     j   36615 -                   3478      Cheanel 2             [0           2 Further Evaluation Chamnel 3 13         l2         0 Required:
Chunmel 4 0           E         0       Fl Yes 1 NMoI.
                                                                                                                .           -. i:-
(ahonel5 a            (a2 _        Ardlivo TapedCNo.:
Chnnr 6e13            El        l            10 A/B
_                                      =
lChanel 7 0
                                                                                                =
01     El  AnalyolaTape/CD No.:
_          _        =        =
WCannels 0             0         El           N/A knnlystl SN'r Level / Date.
rryzlson. UT0 inm.990,
                                          'k-n-                      -              IS] :                   13 1 -j r e- k Z o "-
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice inspection Program Request for Relief I-ISI-19 Attachments Page          1 of    1 rcam Number 82 Watts Bar Unit 1 RPV-NlG Outlet Nozzle to Shell @ 202 Deg Cursor Box 1 of 1 Scan Axis                                           25.02 -          26.26 Inc. Axis                                           36.00 -         49.95 Depth In Material                                      1.45 -       2.01 Channel 3 Module Coordinates Inc. Axis                                            34.94 - 48.40 Scan Axis                                            27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis                                           38.1C - 51.49 Scan Axis                                            27.94 - 29.18 Channel S Module Coordinates Inc. Axis                                            36.00 - 51.02 Scan Axis                                            25.54 - 26.78 Channel 5 Feature Analysis                                              Summary Comments No recordable indications chs 1, 2,
                                            & 3.
Reviewed By D-K                                        SNT Level          _l_          Date      13    jrci200S E4A-23
 
ISwT Examination Summary Record PrJ.d N.:                                                                                          _'                    _          ySbh    No.
368                                                Watts Bar Nudear Plant Unit 1                                              300016 Esarnatson Area: Reactor Pressure Vessel LlnelAasunbly:  Nozzle to Shell Weld N-17 Identflicatloo:  Outlet Nozzle at 15Wegrees                          T N    H                                                                                    0.
Not          oC                Cxum                      c a              P..i    Cr M~        R5YJacN              Nw1      Efxam An*gl  I  8    Anfalyt  Record  No                  Refflrn AUT    IST-P0G-MIk1T5            7          AUTO    -   -                           AUTOfor 04clw. osummenf el Ewondos ICN 2              74      AUTSUC40    X
* Co                    perFom f rn eooel s shell rwe ImIted due to boE 73    AUT SLIC4Ot  X    -     CB                    iotal Oe 72        AUTSnt    X    -     Ce LSOwPOIAUT4110        e  7-77    AUT PAIS  X    -     Ce    r      l b    r          msperformed tow. noie bo.                       EOo CD'5. _'
d-      DE E-  0 0
Do.
P,.prdBy:                                                       bD.t                              IPgeg                      Suffna.y No:
13-Mar-05                          I OFI                      300016 I
AA"ZC1
 
                                                                        ,,I1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATIlON RECORD Site'Plant:    WatsBar                                  Wld Identification: gPV-NI7                      PriRrv/ZICbpCN_        ISwT4-D[-AUT4/0/0          I6 PrajectNo.: 04-0365                                      Melda        t          n      i            5      cNExamnatina                                                    No:        67 Md.Cotf.: 30                                            Scv9"Pail Dra-tur.       SPNOZOUT                        Exm Date              Examination Time              Surface Tm9er        F Data Acquisition Operator (sJ ISNT Level: P.R.     Rlein ja      ItR                                          07 March 2005          Ssrt0    I     Ed                          l          d
[ 1703    1    1755            7fi        1      76                  CD Data    Acquisition Scan Coatrollervaraaetsm            Increment Axsk              rimed                    Actual    Sm Axis              Planned            Actual            Positiona] Parameters Controller                PaRt            LowerLinit                    8542                  85.42      LowerLinmit            5.00            5.00      Beamn Direction:                   Twd      CD Scam                  HeadRotate          U      Untit                107.42                107.42      UnerLUnit              65.00      1    65.00      Transducer Size;      22rmm x 45mn Incrvamet            BoomuExind            Inccae    Inaiterval        1.00                              RcwbZluiin              0.20                        Code % of OerbTp:                  NtA Mode:              AutwonaicSecn  m      Conversion Counts            100                                Conversion Counts      100                        NIuberofScaw.                      23 Scan Motion          Bi-directional        CouversioAUnits              Inches                            Convrsion Units        Deg-e                      mom Rotate Posiioe              158.00 Co                      Def/ult                                                                            Rdius n. ,              14.50                      Hoist @NozzleC/L                 S3.91 on0 0 ModulekParameters:           30           C 1201                                                             CalibratiouRecords: isxamination Notes:
IRaI..         Aaale.     Dklrinav         Sean Offst         Ste" Offst                       WAT-20         I Chassellt          O         PA16-L           1- L             90.00t d           + 0,0n)                         1200201                                                                             XPo'COD Cbhnad2           On       PAI6-S             -           + 90.00(d             + 0.00in )                     1200201 Chanmdl3           Off           N/A           N'A                 N/A               NA                           _ N/A Cbannd4           Off           N/A           N/A                 N/A               N/A                             N/A           FxsmiaatieafnRemarlc Clanumd 5         Off           NA           N!A                 N/A               NIA                             N/A saicftcl     Qff_ N/A             _     N_/A                 NiA           _NA                                 N/A td   7       01!           N/A         NtA                 N/A               N/A                             N/A CIsdc8             Off           N/A         WA                   N/A               N/A                             N/A onz-Data Analysis CD)
Inceeat
* Sem Positions Acuaal                                 Recordable Dodicatto         _                                     Analyst Remarks                                             --
SI'           _ nc entPosition                   Scen"8sition                     Yes       No       N/A  


==Attachment:==
==Attachment:==


San ;Start stop Start Stop Channel I 0 -, 0 _ Yes Il No I-23 55.42 107.42 5.00 65.00 Csauaut 2 E El 0 Further Evaluattoa Channel__Chnc 3 0 n 21 Required:_Ched4 n n n Ycs El No Channel 5 0 0 El Archiye F&peI/) No.t__ __ Clsanncl6 0 0 0 1._____. hannel 7 0 &deg; Analysis TWCD No:___ ChanndeS 0 2 a O_ IA Analyst / SNT Level /Dl t (. 1 I r,.nuveojas 4e.I orr I Ov. aaw)CD CD on0 0 XPo 'COD--onz-CD)CD1
San           ;Start           stop         Start         Stop       Channel I     0       -,     0     _     Yes Il No I-23         55.42         107.42         5.00         65.00       Csauaut 2 E         El       0 Further Evaluattoa 3 0 Channel__Chnc        n       21 Required:                                                                                             CD1
,i ll SOUTHWEST TECHNOLOGIES cm AUTOMATED ULTRASONIC EXAMINATION RECORD Siteflisnt:
_Ched4 n             n                 n Ycs El No Channel 5 0         0       El Archiye F&peI/) No.t
Wats~r Wldldotification:
__       __                                              Clsanncl6 0         0       0             1.
RPV-NI7 1PrVIRev/Cl/ICN:
_____.                             hannel 7 0         &deg;           Analysis TWCD No:
ISwT-PD1-AUt4/M/0/O Examinatijo No.: 68 Projet Noa- 04-0363 Weld Desriti n ODt NewtS- ISVa l 6V.-12 DeviceComfig uratio: WAT-NOZCON-00t Mod.CeaL:
___                       ChanndeSa    0       O_      2                 IA Analyst / SNT Level /Dl         t (.           1                     r,.                         I nuveojas4e.I orr   Ov.                                                                                                 I                      aaw)
30 Sean Path Draving: SPNOZOWI Bu Date I Examluati Thim SSurfua Ten7rpeature F Dta AcquisitianOperator(s)/SNTLevel:
 
D. R ldjan I11 Marc 2005 Start I nd SEnd i1757 1807 76 76 Data Acquisition Scan Controller Parameteur Inerement Asia pland Acual Scan Axis Planned Actual Poitional Parameters Conhrollt PaR LowrLimit ss.42 85.42 Lowerlimit 64.00 64.00 BemnDiction Twd Scan: Hlead Roal UpperLmit 107.42 107.42 U Lperlimit 12504 12504 Transducer Size: 22mm x 4 5nmm Incruem .Boom Extend tzrunenclateval 100 Resolutlon 0.20 Code % of Overlap: N/A Mode: Automatic Sean Conversion Counts 100 Conversion Counts 100 NwunberotScans:
            ,i                                                     ll SOUTHWEST TECHNOLOGIES cm                                       AUTOMATED ULTRASONIC EXAMINATION RECORD Siteflisnt: Wats~r                                 Wldldotification: RPV-NI7                       1PrVIRev/Cl/ICN:       ISwT-PD1-AUt4/M/0/O       Examinatijo No.:           68 Projet Noa- 04-0363                               Weld Desriti n ODtNewtS- lISVa 6V.-12             DeviceComfig uratio: WAT-NOZCON-00t Mod.CeaL: 30                                       Sean Path Draving: SPNOZOWI                             Bu Date         I Examluati Thim                 SSurfua Ten7rpeature F Dta AcquisitianOperator(s)/SNTLevel: D.R ldjan I11                                                           Marc 2005         Start I       nd           SEnd i1757       1807             76                 76 Data Acquisition ScanController Parameteur Inerement Asia                 pland                   Acual       Scan Axis           Planned         Actual           Poitional Parameters Conhrollt               PaR           LowrLimit                 ss.42               85.42         Lowerlimit             64.00         64.00     BemnDiction                     4 Twd Scan:               Hlead Roal         UpperLmit                 107.42                 107.42       U     Lperlimit       12504         12504     Transducer Size:       22mm x 5nmm Incruem .           Boom Extend       tzrunenclateval           100                               Resolutlon             0.20                   Code % of Overlap:               N/A Mode:             Automatic Sean     Conversion Counts         100                                 Conversion Counts       100                     NwunberotScans:                   23 Sc Motion           Bi-diectional     ConversionUnits           Inhes                               Conversion Units       Degrees                 BomnoCDItinftinnt             15.-00 CencAti                 Onfeult                                                                     pudi.0 in.             14.50 _oist                   9Nozzl C/L               83 98 ModuleParamnters           3tl         Col 201                                                         Calibration Records iExaminsaton Notes:
23 Sc Motion Bi-diectional ConversionUnits Inhes Conversion Units Degrees BomnoCDItinftinnt 15.-00 CencAti Onfeult pudi.0 in. 14.50 _oist 9Nozzl C/L 83 98 ModuleParamnters 3tl Col 201 Calibration Records iExaminsaton Notes: Sterns Anein D ;~s Sc.nOit~e St.e CFfst ":AT-201 Channel I On PA16-L -+ 90.00deg)  
Sterns         Anein     D ;~s           Sc.nOit~e     St.e CFfst                         ":AT-201 Channel I         On       PA16-L           -           + 90.00deg)     + 000(in)                         1200201 Chanoel2         On       PA 16-S         (-)           + 90.00[d)       + 0.00(io)                         1200201                           _       _       __
+ 000(in) 1200201 Chanoel2 On PA 16-S (-) + 90.00[d) + 0.00(io) 1200201 _ _ __Channel 3 Off NtA NtA N/A N/A N/A Channel 4 Otr WIA N/A NUA N/A N/A PEaminstlon Remarks: Channel 5 Off N/A N/A N/A N/A NtA Channel 6 Off N/A N/A NiA N/A N/A Chonnd7 Off N/A N/A N/A NtA N/A ChanntS Off NtA N/A N/A NIA N/A Data Analsi Increment  
Channel 3         Off           NtA       NtA                 N/A           N/A                               N/A Channel 4         Otr           WIA       N/A                 NUA           N/A                               N/A         PEaminstlon Remarks:                                         5.
& Scan Poeitions Actual Recordable Indiuatbns Analyst Remarkl Scan No(s) Inf-ne ptaition I Sams 'csition Yes No NMA Attchmnene o(5) Stwat Stop Start Stop Cliatm I 0 o 0 &deg; Yes El No 1- 23 85.42 107.42 64.00 125.04 Chunnel 2 0 El &deg; FunerEvmalugion
Channel 5         Off           N/A       N/A                 N/A           N/A                               NtA                                                                       1C12 Channel 6         Off           N/A       N/A                 NiA           N/A                               N/A Chonnd7         Off           N/A       N/A                 N/A           NtA                               N/A ChanntS         Off           NtA       N/A                 N/A           NIA                               N/A Data Analsi Increment &ScanPoeitions Actual                           Recordable Indiuatbns                                           Analyst Remarkl Scan No(s)     Inf-ne ptaition I           Sams'csition                   Yes     No     NMAAttchmnene o(5) Stwat           Stop       Start         Stop   Cliatm I 0o                  0&deg;           Yes El No 1- 23       85.42         107.42     64.00       125.04 Chunnel 2 0             El       &deg; FunerEvmalugion
_liuncl 3 0 n 03 Requied _i_ Chhanod4 0 El 0 D Ys [ No__ Chnuel 5 0 0 El ArchiveTax/CDNo:
_liuncl 3 0         n           03Requied                                        _
_Channol 7 0 0 Analysis TapC No AnaAyst .. E Leve a0 I Anls I ~SNT Lvl IDote : A 5.1C12 swrvFOK. Ursa t I 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Si nt WtD eldIdentificatjox:
i_                                    Chhanod4 0           El       0         D Ys [ No
RPV-Nli7 Pro/evi1b CN: ISwT-PDI-AUT41/11010 zxamadtlo
__            Chnuel 5 0           0 El ArchiveTax/CDNo:
: o. 69 Pr. .ctN r.z 04-036f weld Deseri floa: oteNe Sh O 124 11 D Co errattoa WAT-NOZCON-0001
_Channol 7   0                 0   Analysis TapC No AnaAyst             ..                                 E             I            Leve   a0 Anls I ~SNTLvl IDote :                                                                                                                 A swrvFOK. Ursa t I
_Mod.CenLr 30 Scan Path Drawin SPNOZDUT Ezam Date xamintlm tioTime Surface Tterature F Data Acquisition Operator () ISNT lvel: D. R. Klenjan I R 07 I 2005 ___ S Start_ End_1814 IS123 76 1 76-Isata Acquisition Scan Ceatrallerlerameters IucreatAxls flosed Actual ScanAiso Plauned Actual l Feeilwanl Farewt-rs Conbtollw.
 
PaR LowerLinnt f5.42 85.42 LwerLimit 124.00 124.00 Beam Directi..
1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Si   nt       WtD                                       eldIdentificatjox: RPV-Nli7                 Pro/evi1b CN:         ISwT-PDI-AUT41/11010       zxamadtlo     o.       69 Pr. .ctN r.z 04-036f                                   weld Deseri floa: oteNe Sh O 124           11 D       Co errattoa WAT-NOZCON-0001                         _
Twd Scan: Hcu dRotte Ff Virwt 107.42 107.42 Up rlimit 15.04 1I5-04 T-nsducerSim:
Mod.CenLr 30                                           Scan Path Drawin SPNOZDUT                           Ezam Date             xamintlmtioTime              Surface Tterature F Data Acquisition Operator() ISNT       lvel: D. R. Klenjan I IR                                          07       2005     ___S                              Start_           End
22mm x45mm Incrennt:
_1814                                                                              IS123           76         1   76-Isata Acquisition                                                                                       P.
BOOn Extend lnmament Intenral 1.00 Resolution 0.20 Code % of Osrlap: N/A Mode. AutomIatic SCSn Conversion Couts 100 Conversion Counts 100 Numberof'Scens:
Scan Ceatrallerlerameters           IucreatAxls               flosed                 Actual     ScanAiso             Plauned           Actual   l         Feeilwanl Farewt-rs Conbtollw.                 PaR           LowerLinnt                 f5.42               85.42       LwerLimit               124.00         124.00     Beam Directi..               Twd Scan:                 Hcu dRotte         Ff     Virwt               107.42               107.42     Up rlimit               15.04       1I5-04       T-nsducerSim:       22mm x45mm Incrennt:             BOOnExtend          lnmament Intenral         1.00                             Resolution             0.20                       Code % ofOsrlap:               N/A Mode.               AutomIatic SCSn       Conversion Couts         100                               Conversion Counts     100                       Numberof'Scens:                 23 Scan Motion:         Bi-directional       Conversion Units         Inches                           ConversionUnils       Deges                     BoomRotatePosition:         150 Cornvotio                 Default                                                                     Radius I               14.50                     Hoist @ Nozzle CL:           39 8 Modle arameters:             3l           Cal 201                                                     Calibrati Records: Examization Notes:
23 Scan Motion: Bi-directional Conversion Units Inches ConversionUnils Deges BoomRotatePosition:
Channel I           On                                                                                                                                                                     0P.
150 Cornvotio Default Radius I 14.50 Hoist @ Nozzle CL: 39 8 Modle arameters:
PAI6&L                         + 90.0(deg)       + 000(in)                     1200201 Channel 2           On       PA165-S                       + 90.00tde_       + 0.In)                       1200201 Channel 3           oir           N/A         NMA                 N/A           N/A                           N/A Chsnnol 4           Off           N/A         NIA                 N/A           NtA                           N/A         Examination Remarks:
3l Cal 201 Calibra ti Records: Examization Notes: Channel I On PAI6&L + 90.0(deg)  
channel 5           ONf           N/A         NA                   NVA           NI/A                           N/A                                                                       on Channel 6           Off           N/A         NMA                 N/A           M/A                           N/A Chtanne   7         Off           N/A         NIA                 N/A           NMA                           1UA Channef             O off           N/A         N/A                 N/A           NtA                           Ni/A Dbit   Analysis nfcrement & Sean Pantilons Actual                         Recordable Indications                                         AuslystRoomarks Sa_       (5)   I4 Incrmlen t Position           ScanPsition                      Yes     No     N/A Aftschinent:                     ___
+ 000(in) 1200201 Channel 2 On PA165-S + 90.00tde_  
Stort          stopts     Sut           Stop     Channel I                   C         OYes l          No                                                                       f4-I I-23         85.42         107.42     124.00       103.04   C nnnd2 0           E3     C FultherEnvtuaton Channcl 3 0         n       E Required:
+ 0.In) 1200201 Channel 3 oir N/A NMA N/A N/A N/A Chsnnol 4 Off N/A NIA N/A NtA N/A Examination Remarks: channel 5 ONf N/A NA NVA NI/A N/A Channel 6 Off N/A NMA N/A M/A N/A Chtanne 7 Off N/A NIA N/A NMA 1UA Channef O off N/A N/A N/A NtA Ni/A Dbit Analysis nfcrement  
ChannelO4 0         0       D,       O Yes El No C___wi 5 0         0       C   Arcmv/crDNo.:                                                                           ri a _6 0                   &deg; I          JT--                         --
& Sean Pantilons Actual Recordable Indications AuslystRoomarks Sa_ I4 (5) Incrmlen t Position Scan Psition Yes No N/A Aftschinent:
_Chamel 7 0         0       E AnalysisT e/CDNo.:
___Stort stopts Sut Stop Channel I l C OYes No I-23 85.42 107.42 124.00 103.04 C nnnd2 0 E3 C FultherEnvtuaton Channcl 3 0 n E Required: ChannelO4 0 0 D, O Yes El No C___wi 5 0 0 C Arcmv/crDNo.:
                                    .                     _         Channell U                   9 I       MIA Analyst / S1iT levelI   Date:
a _6 0 I &deg; JT-- --_Chamel 7 0 0 E AnalysisT e/CDNo.:._ Channell U 9 I MIA Analyst / S1iT levelI Date: I'\ ,ooz P.0P.on f4-I ri 3wTr o5MNf. Ursa IF-. 0n&\ __I I11 SOUTJWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitePlat:
I'\       ,ooz 3wTr o5MNf. Ursa IF-. 0n&
WtsBar Weld ildeatifiatlow:
                                                      \ __                            I
RPV-N17 Wrro/RICchCN:
 
ISvT-PDI-AUT4/0/0M Ex-A letit N: 70 ProjectNo.:
I11 SOUTJWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitePlat: WtsBar                                           Weld ildeatifiatlow: RPV-N17                     Wrro/RICchCN:             ISvT-PDI-AUT4/0/0M       Ex-A letit N:           70 ProjectNo.: 044368                                         WeldDeiptldon: 0.Oe-t             64,15     9^1. DevkeCeoia       ation: WAT-NOZCON 00I Mo4.C.RL- 30                                               Seao PWalDrawin: SPNOZOUT                               ExamMDate         I EAmist leIe                                       FSTeer Data Acqialtion Operator (s) I SNT Levd: D. IL Kel msan             fn                                          07 Mah 2005             1S24r l_1834         1       76                 76 Scan Ceotrollerlaraumet Controller                   PR InsremeatAsls LowerLim Plnned 85.42 Data Acquisition Actiul 85.42 ScnAxis Lower Limit Pl 14.00 d  l _ArActual I400 Poitdonal araimeters BearmDirection                 Twd L0o SC=i                     Head Rotate           Upr Limit                 107.42                 10742       lupper limit               245.04 1     245.04   Txasduer Sie         22mm x 45mm Boom Extend           Inement Interval           1.00                               Resolution                 020                     Code %ofOvelap:               NA Mode:                   Automatic Scn         Conversion Counts         100                                 Conversion Counts         100                     Number of Scaus                 23 ScanMotionu            Bi-direclionul         ConersionUnits             Inches                             ConLvrsion Units         Degrees               BoomRotaePotition:           158.00 Corn                       Defoult                                                                         Radius InL               14.50                 Moist@Nozzle CL               83.98 Modul hrasnetere:                 30           Cal 261                                                         Calibradox Records:     ExaatstIF Notes:
044368 WeldDeiptldon:
MAs             A.iA       Direction       S9n offset       Ste O-hietI                       WAT-201 Channel I             On         PAI6-L           -)           + 90.0(d% t         +0.00(in)                       i200201 Clsanad 2           On         PA16-S             -           I 90.00(dco       + 0.00(in)                       1200201 Chlanel 3           Oif             N/A         NMA                 NA             N/A                               N/A Channel 4           Off             NtA         NA                 N/A             N/A                               N/A           Examination Itnarts:
0.Oe-t 64,15 9 ^1. DevkeCeoia ation: WAT-NOZCON 00I Mo4.C.RL-30 Seao PWalDrawin:
Clhnnel5             Off             N/A         N/A                 N/A             N/A                               N/A alannel 6           Off             N/A         N/A                 N/A             N/A                               N/A Channel 7           Off             N/A           WtA               N/A             N/A                               N/A     _
SPNOZOUT ExamMDate I EAmist leIe FSTeer Data Acqialtion Operator (s) I SNT Levd: D. IL Kel msan f n 07 Mah 2005 1S24 r l_1834 1 76 76 Data Acquisition Scan Ceotrollerlaraumet InsremeatAsls Plnned Actiul ScnAxis Pl d l _ArActual Poitdonal araimeters Controller PR LowerLim 85.42 85.42 Lower Limit 14.00 I400 BearmDirection Twd SC=i Head Rotate Upr Limit 107.42 10742 lupper limit 245.04 1 245.04 Txasduer Sie 22mm x 45mm Boom Extend Inement Interval 1.00 Resolution 020 Code % ofOvelap:
Cannel S             Off           N/A         N/A                 N/A             N/A                               N/A Data Anslysco InreMet & S9a Poaitions Actual                             Recordable Indicatioas                                             Analyst Remarks
NA Mode: Automatic Scn Conversion Counts 100 Conversion Counts 100 Number of Scaus 23 Scan Motionu Bi-direclionul ConersionUnits Inches ConLvrsion Units Degrees BoomRotaePotition:
_ o       nchement Position               Scanosition       l             Yes     No       NWAAtiadunent ScanNo (s)         Start     l     S           Stan         s0op       Chauel I 0                 0         O Yes 0 No I - 23           85.42           107.42       1U4.00     245.04     Ciminoll     3       El     0   PurtarEalualion
158.00 Corn Defoult Radius InL 14.50 Moist@Nozzle CL 83.98 Modul hrasnetere:
_ __                             Clane!L3 0           0   _3       Required:
30 Cal 261 Calibradox Records: ExaatstIF Notes: MAs A.iA Direction S9n offset Ste O-hietI WAT-201 Channel I On PAI6-L -) + 90.0(d% t +0.00(in) i200201 Clsanad 2 On PA16-S -I 90.00(dco  
_     _         __                                     Channel4 0           0       0         n Yes     O No
+ 0.00(in) 1200201 Chlanel 3 Oif N/A NMA NA N/A N/A Channel 4 Off NtA NA N/A N/A N/A Examination Itnarts: Clhnnel5 Off N/A N/A N/A N/A N/A alannel 6 Off N/A N/A N/A N/A N/A Channel 7 Off N/A WtA N/A N/A N/A _Cannel S Off N/A N/A N/A N/A N/A Data Anslysco InreMet & S9a Poaitions Actual Recordable Indicatioas Analyst Remarks_ o nchement Position Scanosition l Yes No NWA Atiadunent ScanNo (s) Start l S Stan s0op Chauel I 0 0 O Yes 0 No I -23 85.42 107.42 1U4.00 245.04 Ciminoll 3 El 0 PurtarEalualion
__=__                     Channel S           0       0 Archive TapeCCDNo.:
_ __ Clane!L3 0 0 _3 Required:_ _ __ Channel4 0 0 0 n Yes O No__=__ Channel S 0 0 Archive TapeCCD No.:___ Chunnel6 0 0 E3 J=Chws_-eh 7 0 0 i3 1ytisTa No.:-Channeal 0 0 3 i84 1 A An;lst I SN? AT, I D/Datee L0o-s- ----- --...I I He H" -L -------- ----: X :X: 0- -A rr IHIH SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitafflant:
___                                                     Chunnel6 0           0       E3               J
Watts Bar iWeld Identifetkhin:
                                                                          =Chws_-eh 7 0         0       i3 1ytisTa             No.:
BPV-N17 jwretkev/ClbV1M:N ISwT-PlX-AUT4@/W0 fPrijectrNo 04-036's __WeUdl~srptiaw.
                                                                          -Channeal     0           0   3             i84 1 A An;lstI SN? AT, I D/Datee
0.tN--to-Sbh1lV(44 Dv eCourgitrem:
- s-         - ----   -   - ...
WAT-NOZOON-0001 resuao.Med.Cuet:
I                   I He H"           -L ------
30 Mesa Tit~iDrawing; SPNOZOUri E-wD." Examination That SurfacQaTtuxrwutre-F bift Acquisition Operator (s) /SKT In d:. D. R. NeleuJa I 11 07 March 2005 l St rt l Ed _ S ait ~ 7 Date Acquisition Sam Coatroller Parameters Ineremt Ask _ lsz!ued __ Actual Sean Ais fauned Actual Positionl Parameters Contiroller PaR lornm it i5.42 05.42 lwer liit 2U4.00 I 244.00 Belm Direction:
-- - : --- X :X:           0--       A
Twd Scan: Head Rotate Upp liit 107.42 107.42 UUperLimit 305.04 305.04 Txensduer Size: 22mm x45mm Increnwat Boom Extend lnariniena t[mo Lo0 Resolution 0.20 Code % ofOvedap:
 
N/Mode: Automatic Scan Conveesio.
rr                                                     IHIH   SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitafflant: Watts Bar                                   iWeldIdentifetkhin: BPV-N17                     jwretkev/ClbV1M:N       ISwT-PlX-AUT4@/W0 fPrijectrNo     04-036's               __WeUdl~srptiaw.                       0.tN--to-Sbh1lV(44       Dv       eCourgitrem: WAT-NOZOON-0001             resuao.
Counts 100 Convenion Counts 100 Number of Sca. 23 ScaMotion:
Med.Cuet: 30                                             Mesa Tit~iDrawing; SPNOZOUri                             E-wD."             Examination That           SurfacQaTtuxrwutre-F bift Acquisition Operator (s) /SKT In d:. D. R. NeleuJa I 11                                                   07 March 2005     l   St rt l     Ed     _       S ait         ~   7 Date Acquisition Sam Coatroller Parameters           Ineremt Ask         _     lsz!ued       __       Actual     Sean Ais               fauned         Actual           Positionl Parameters Contiroller                   PaR           lornm it                 i5.42                   05.42       lwer liit               2U4.00 I     244.00     Belm Direction:               Twd Scan:                   Head Rotate       Upp liit                   107.42                 107.42     UUperLimit               305.04       305.04     Txensduer Size:       22mm x45mm Increnwat               Boom Extend         lnariniena t[mo           Lo0                               Resolution               0.20                   Code % ofOvedap:             N/
Bi-direetional Coweesto.
Mode:                   Automatic Scan       Conveesio. Counts         100                                 Convenion Counts       100                     Number ofSca.                   23 ScaMotion:               Bi-direetional     Coweesto. Ur/its         Inches                               Conerusion Units       Degeps                 BooerReuttoP   sjo         15S.00 Correction:                 Debult                                                                       Rdu In.                 14.50                   Hoist Nozzle C.             S3.9s Modnlaraseters:                 30         CA 201                                                         Calibration Recrds: Examinsation Notes:
Ur/its Inches Conerusion Units Degeps BooerReuttoP sjo 15S.00 Correction:
Stain         Au io         ,ie         &weGIe           S..                               'A--^
Debult Rdu In. 14.50 Hoist Nozzle C. S3.9s Modnlaraseters:
Channel I             on       PA16-L           -         + 90.00(dog)       + 0.00(inl                       1200201                                                                     CD CD Channel               On       PA1-(-S                     + 90.00(deg)       + 0.00(in)                       1200201 COannel 3             Of           VA         NIA               NtA             N/A                             NtA Channel 4             Off           VA         N/A               N/A   .         NA                             NtA           Euminsation Rnarks:                                           W 0 Chnnel 5 Channel 6 Off Off MA N1A NA NA N/A NIA NMA N/A NiA N/A
30 CA 201 Calibration Recrds: Examinsation Notes: Stain Au io ,ie &weGIe S.. 'A--^Channel I on PA16-L -+ 90.00(dog)  
                                                                                                                                                                                                        ~1-Chnnnel7             Oil           MA         NIA               NIA             NIA                             N/A                                                                             CD-Clnt     S           0/           N/A         NtA               N/A             N/A                             NtA Data Analysis
+ 0.00(inl 1200201 Channel On PA1-(-S + 90.00(deg)  
            - - Icrmnt & SC" Positoas Actual                                   Recordable Indications                                         AnalystRemarks
+ 0.00(in) 1200201 COannel 3 Of VA NIA NtA N/A NtA Channel 4 Off VA N/A N/A .NA NtA Euminsation Rnarks: Chnnel 5 Off MA NA N/A NMA NiA Channel 6 Off N1A NA NIA N/A N/A Chnnnel7 Oil MA NIA NIA NIA N/A Clnt S 0/ N/A NtA N/A N/A NtA Data Analysis--Icrmnt & SC" Positoas Actual Recordable Indications AnalystRemarks cam No.(s) I en Position Sa Position Yes No NIA Attdcmanent_
                                                                                                                                                                                              ~~    A camNo.(s)         I     en Position             Sa Position                     Yes     No     NIA Attdcmanent_
Stect stop Suft Stop Chanel I O R 0 O Yes El No I 23 85.42 107.42 244.00 302.04 COannel 2 0 Pi 0 Further Evaluation Channel 3 0 n El Required: Channel 4 0 n 2 D Yes El NO Channel5 0 0 (a Arhive TapefCD No.: Chann.^l 6 1L 0 2L ._____. .... Channel 7 n AnElysisTarctCONo.:
Stect         stop       Suft       Stop     Chanel I O           R       0       O Yes     El No I 23           85.42         107.42     244.00     302.04     COannel 2 0           Pi       0 Further Evaluation Channel 3 0           n       El Required:
A Clinncil S O_______14_l__
Channel 4 0           n       2       D Yes El NO Channel5 0           0       (a Arhive TapefCD No.:
S/ SI:T Leve l l cl Datoe CD CD W 0~1-CD-~~ A nWr]FORKM.
Chann.^l 6 1L                 0           2L                               ._____.                               ..
VT9. t(R-*5MM t1-I 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitJllat:
              ..                                                       Channel 7             n             AnElysisTarctCONo.:
WatlBa IWBld Idctid inctiv: KV-N1I7 Prtt!rvlCbWlCN:
A                           Clinncil S   O_______14_l__
ISSwT-?DL1-AUT4/W00I -A 2 Pro jetNo! 04-036S 1WeldDeeripttbw 0UtNtozSh 1w -Z3 J4 vlcCaDfetualna:
S/SI:T Levecl    Datoe          l                               l nWr]FORKM. VT9. t(R-*5MM t1-                           I
WAT-NOZcON-0001
 
____________
1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitJllat:   WatlBa                                   IWBldIdctid inctiv: KV-N1I7                       Prtt!rvlCbWlCN:         ISSwT-?DL1-AUT4/W00I       -A                               2 ProjetNo!   04-036S                                   1WeldDeeripttbw       0UtNtozSh   1w     -Z3   J4 vlcCaDfetualna: WAT-NOZcON-0001                   ____________                     _72 ModCeatf: 30                                         ISms Path Dnwlat . SPNOZOUT                             Fam Date               Exatamita nTTioe                                      -Pratp Data Acqunition Operator (1)1 SN! Level: D.R. Mlunjn I 11                                                   07 March 2005           Stat                               rtStad Data Acqustislo Sac Coatroller Parameten           IncrernertAxis             Plane d                           lAtual S"As                   Planned           Actual               Positioaal'arameters ControUer                 PaR           LowerLimt                 S5.42                 5.42         LoeLiit                 304.00           304.00     Btarn Dweio                           Tnd Sc"n:                 Head Rota         Upper Limit               10742               107.42         Upper Limit                         l    366.00 36             oducer Size:           22mm x 45mm Icemanent           Boom Extend         incrinent lnval.           1.00                               BRemultio               0.20                         Code% of Obelp:                       N/A Mode:               AutinaticScum       ConverslonCounts     .     100                                 ConvymionCoiunts       IWO                         Number of Sns                         23 ScanMorowo           RBdiretlional       Cnvmrsioa tinits           inches                               Conversion Units       Degreet                     Bmn RotbtePositim:               151.00 Correctionn             DAult                                                                                   In.             14_50                       Hoist
_72 ModCeatf:
_Aus (a) Nozzle cn     _         83 9S Module Paraueteru:         30           Cal 201                                                 _       Cibration Records: Examlination Notes:
30 ISms Path Dnwlat .SPNOZOUT Fam Date Exatamita Tio e nT -Pratp Data Acqunition Operator (1) 1 SN! Level: D. R. Mlunjn I 11 07 March 2005 Stat rtStad Data Acqustislo Sac Coatroller Parameten IncrernertAxis Plane d lAtual S"As Planned Actual Positioaal'arameters ControUer PaR LowerLimt S5.42 5.42 LoeLiit 304.00 304.00 Btarn Dweio Tnd Sc"n: Head Rota Upper Limit 10742 107.42 Upper Limit 366.00 l 36 oducer Size: 22mm x 45mm Icemanent Boom Extend incrinent lnval. 1.00 BRemultio 0.20 Code % of Obelp: N/A Mode: AutinaticScum ConverslonCounts  
i>
.100 ConvymionCoiunts IWO Number of Sns 23 ScanMorowo RBdiretlional Cnvmrsioa tinits inches Conversion Units Degreet Bmn Rotbte Positim: 151.00 Correctionn DAult _Aus In. 14_50 Hoist (a) Nozzle cn _ 83 9S Module Paraueteru:
Channel           OI       PAI6-L           -             190.               0   in200201 (2bunel 2         On       PA16-S           -             + 90. (dea)       +1().i)                           1200201 ainnsd 3         Off         N/A         N!A                 N/A           N/A                                 N/A
30 Cal 201 _ Cibration Records: Examlination Notes: Channel OI PAI6-L -190. 0 in200201 (2bunel 2 On PA16-S -+ 90. (dea) +1().i) 1200201 ainnsd 3 Off N/A N!A N/A N/A N/A Channed 4 OX N/A NMA N/A NMA N/A Fxaaui.ntjw Rnmarkcr Channeld5 Off N/A NtA N/A /A NtA Chanel 6 Off N/A N/A N/A N/A N/A Channel 7 Off Nt A NtA N/A N/A -__________
                                                                                                                                                                                                        -4 Channed 4         OX           N/A         NMA                 N/A           NMA                                 N/A         Fxaaui.ntjw Rnmarkcr Channeld5         Off         N/A         NtA                 N/A             /A                               NtA Chanel 6         Off         N/A         N/A                 N/A           N/A                                 N/A Channel 7         Off         Nt A         NtA                 N/A           N/A             -           __________             __
__channd S Off NtA N/A N/A N/A NtA Increment  
channd S         Off         NtA         N/A                 N/A           N/A                                 NtA Increment & Scan Nitiion Actual                           Recordsbe Indicaticas                                                 Analyst Remarks a No4s) -Incnt         Position           Scm Positiwn                   Yes     No         N/A Attfsacent Stun         Stop         Statn         StoP     Chsncl   0       P3         0         OD Yes       1No                                                                             C -4 I- 23         85.42       107.42       304.00       366.00     Channel 2 0         1         0 Further Evaluation
& Scan Nitiion Actual Recordsbe Indicaticas Analyst Remarks a No4s) -Incnt Position Scm Positiwn Yes No N/A Attfsacent Stun Stop Statn StoP Chsncl 0 P3 0 OD Yes 1No I- 23 85.42 107.42 304.00 366.00 Channel 2 0 1 0 Further Evaluation
__ ____      _   __   _     __   __   Charnne3 0R                   P Reqtuired:_                     _  _   _ _   _   _ _ _ _   _ _   _ _   _   _ _ _   _   _
___ __ __ __ _ __ _ __ __ Charnne 3 0R P Reqtuired:_
Chanurl 4 0       0         13       &deg; Ys El No Channel 5 0         0         o     Archive 'repea No.:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Chanurl 4 0 0 13 &deg; Ys El No Channel 5 0 0 o Archive 'repea No.: 'Channel 6 0 0 0 13 -Chnnel 7 0 0 E AnolysisTt e/CDNo.A____ Channl 8 0 n _I A Analyst/SNI Level I D \ / -ate:.k a A ; I Iz- I i>-4 C -4 zwTORMN. t'rT ."2s\
                                                                    'Channel 6 0         0         0 13           -
pE1111 SOUTHWEST TECHNOLOGIES M AUTOMATED ULTRASONIC EXAMINATION RECORD S Piast: Watt Bar Weld Identificatien:
Chnnel 7 0         0         E AnolysisTt     e/CDNo.
RPV.N17 1PreRevfClii/CN:
A____                             Channl 8 0         n                               A                                                        _I Analyst/SNI Level I -ate:
iSwT-PDI-Afl)TIO/Il&2 IXInstiorn,.
D                           \           /
73 Project Ms. 04-036t tdd W D : OutletNoz-to-Sh9i 15 Device Confituraiia:
                                  .k                         I                 Iz-                     I             a    A    ;
WAT-WALCON.O0I
zwTORMN. t'rT   . "2s
_ _ _MSdCa: 09 Srs Path Drawler. SPNOZOUT Exum Date EIUsamatiou Time SurfaceTermerastre  
                                                      \
'F Data AeqmisitinoOperater(s)lSITLvel:
 
D RLflahijan/I-12-Mar-S5 S 01 313U7 S78 Scan Ctralkr Parumntein lacrnment Axis Phaed j Adal ai Axis ]ae Actual Positiaal Psuanieters Controller POR Lower Limit 2238 2594 Lower Limit 9000 9000 BeamDirection:
pE1111                                                     SOUTHWEST TECHNOLOGIES M                                       AUTOMATED ULTRASONIC EXAMINATION RECORD S   Piast: Watt Bar                                 Weld Identificatien: RPV.N17                   1PreRevfClii/CN:       iSwT-PDI-Afl)TIO/Il&2 IXInstiorn,.                         73 Project Ms. 04-036t tdd                                 W     D         : OutletNoz-to-Sh9i 15     Device Confituraiia: WAT-WALCON.O0I                   _          _       _
Cw/CUW SCan Circumferecnial UpperLJmt 2952 2955 upLeruimit 9000 9000 Transdo r Size: 100 lncrentm -Radidl Iocenbet beaal 90 NI 7 Code % of Overla 10 Mode- Automatic Scan Cmsvenrdne Comts 100 Cooversion Counts 100 Numberof Scans: 9 Scan Motion: Bi-directional CoMnvsion Us inches Conversion Units Degres Head Rowa Posk 0.O COreCtitD Derault WRaius Is. 85.43 Hoist (Pivot Point): NA M vdle Parameter:
MSdCa: 09                                             Srs Path Drawler. SPNOZOUT                           Exum Date             EIUsamatiou Time                 SurfaceTermerastre 'F Data AeqmisitinoOperater(s)lSITLvel: D               RLflahijan/I-                                         12-Mar-S5               01           313U7           S S78 Scan CtralkrParumntein            lacrnment Axis             Phaed           j       Adal         aiAxis            ]ae                 Actual               Positiaal Psuanieters Controller                 POR         Lower Limit                 2238                   2594       Lower Limit             9000             9000         BeamDirection:               Cw/CUW SCan                 Circumferecnial   UpperLJmt                   2952                 2955       upLeruimit             9000               9000       Transdor Size:                   100 lncrentm -               Radidl         Iocenbet beaal             90                               NI                     7                             Code % of Overla                 10 Mode-               Automatic Scan     Cmsvenrdne Comts             100                             Cooversion Counts       100                           Numberof Scans:                   9 Scan Motion:         Bi-directional   CoMnvsion Us               inches                           Conversion Units       Degres                         Head Rowa Posk                 0.O               0    0 COreCtitD               Derault                                                                       WRaius Is.             85.43                         Hoist (Pivot Point):             NA M vdleParameter:                   t9     Cal 33                                                     Cdlibratie Records:   ]Exaglaties Nod:                                                                 1 CD States         Arle,   Direetion         Scan Offset     Step Offset                       WAT-33             c--- fr limitations duc to the proxisiiyWI coitgrtion oithe           A" Channel I         On             55       t-)             - 7.53tin)       - 1.05(b)                       0803301       outozieintegral extension.
t9 Cal 33 Cdlibratie Records: ]Exaglaties Nod: States Arle, Direetion Scan Offset Step Offset WAT-33 --c- fr limitations duc to the proxisiiyWI coitgrtion oithe Channel I On 55 t-) -7.53tin) -1.05(b) 0803301 outozieintegral extension.
Clnel 2             On             55       (+1             + 7.53Ci)       - 1.05(in)                       0803302 P00 Cheatrt 3           Osl         SLUC40              -           9.95tin)       2.87(in                       0803303 Clmimcl 4           On         SiiC 40     +               + 9.95cn         - 2.i7(in)                       0103304   , _x _naiion Remarks:
Clnel 2 On 55 (+1 + 7.53Ci) -1.05(in) 0803302 Cheatrt 3 Osl SLUC 40 -9.95tin) 2.87(in 0803303 Clmimcl 4 On SiiC 40 + + 9.95cn -2.i7(in) 0103304 , _x _naiion Remarks: Channel5 On OL + 10.56rn) 1.2(in) 0803305 Nso'eCenter HoistPosition  
CD    CDt Channel5           On             OL       +                 10.56rn)         1.2(in)                       0803305       Nso'eCenter HoistPosition -398 Cn6               Off           NMA     N/A                   MA             N/A                             N/A         Boo RaRoftieNozdaCenterPosition-15800                                         0 1anel7     t7ff           N/A       N/A                 N/A           N/A                             N/A         Uunited examination duc o the , IMInyof the outletncezle                     (JQ  (.
-398 Cn6 Off NMA N/A MA N/A N/A Boo RaRoftieNozdaCenterPosition-15800 1anel7 t7ff N/A N/A N/A N/A N/A Uunited examination duc o the , IMIny of the outletncezle ael Oft NA NMA N/A NIA N/A jirtegrai extension.
ael           Oft           NA       NMA                   N/A           NIA                             N/A         jirtegrai extension.
Ineremaent  
U)CD Ineremaent & Ses hesitleos Actahl                           Recordable Iadlatisdn                                             Analyt Roearla 0S 5:
& Ses hesitleos Actahl Recordable Iadlatisdn Analyt Roearla cNo.() -hiiremeot Pofition Scan Psition _ Yes No N/A Atanc ne: start Stop Start Stee Charndl 0 t El O Yes E2 No 5 -9 2594 2955 YUOO 900O Channe 2 0 l 0 Furthae Eveluation
cNo.() - hiiremeot Pofition             Scan Psition         _         Yes       No     N/A Atanc       ne:
.,___ _ __ Channel 3 0 G 0 Required:_ ChCnned4 E 0 O Yes 1 No__aned 5a 0 G Arsh'vc Tcpc/CD No.:____Caonei60 0 El 7 A/BE Chawnel 7 0 ii Anlysis TaeCD No.: I__aal an 0 J O1 O/A __ __Analyst / SN. mise / Daten .1 t I Y 1 sfn roamY. erQ (Ko ISM h it \0 0 CD 1 A" P00 CD CDt 0 (JQ (.U)CD 5: 0S a--Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-4SI-19 Attachments.xam Number 73 Page I of 2 Watts Bar Unit 1 RPV-N17 Outlet Nozzle to Shell @ 158 Deg Cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 90.76 -92.93 21.16 -24.76 6.63 -7.79 Channel 1 25.86 -29.40 102.18 -104.35 Channel 2 Module Inc.Scan Coordinates Axis AXiS 25.86 -29.40 79.36 -81.53 Module Coordinates Inc. Axis Scan Axis Channel 3 27.61 -101.13 -103.30 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 27.61 -80.41 -82.58 Channel 5 25.86 -29.40 97.84 -100.01 Feature Analysis Commets Channel S Summary No recordable indications chs 1, 2, 3, & 4.-:1 r, 1 2 K C, k L) 5-E4A-32  
start           Stop     Start         Stee     Charndl 0           t   El     O         Yes E2 No 5- 9         2594           2955     YUOO           900O     Channe 2 0           l       0 Furthae Eveluation
--4136P IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Flant Watts Bar Wed Identliication; RPV-N17 ro/Rev/C CII: ISwT-PD1IAUrl/0ooII&2 ExRffeuN 74 Prjet Na. 04-036S Wea Dal atien Outlet Noz-to-Sh
                .,___ _         __                                   Channel 3 0         G       0 Required:
: a. 158' DevIce Coafl ratita WAT-WALCON-O010 Mad.Coal 08A Scan Pat. DrawiPNOZOUT g!Ea Data EI aination Ti.. Surface Temnrature OF Pat A~urt~o~pr~sr~)/WTre Crlsh.3arr  
_                                             ChCnned4             E       0       O Yes 1 No
/MKelyalleN/
__aned 5a           0       G Arsh'vc Tcpc/CD No.:
IStart I Fd I start I End l0sts Acquesl92oi Operat8r (s) / VW t C rlgn / _ 0 9 78 78 Sean Caatraller parmers 1._remsnt Axik Planned Actual Scum Axis Pleased Actual Positional Parameters Controller PaR Lowr Liit 500 500 L.*cr Lmit 1878 2226 Beaut Direction:
____Caonei60         0       El             7 A/BE Chawnel 7 0                 ii Anlysis TaeCD No.:
TwdUAwy Scan Radial JpvierLimit 36615 36615 L mit 3311) 3478 TransducerSize:
I__aalanJ O10        O/A                                     __   __
1.00 Increment Circumferential knement intervl 155 DCI 4 Code % ofOvedarp:
Analyst / SN.mise / Daten   .               t         I                                                       1    1    Y sfn roamY. erQ   (Ko ISM                     h it \
10 Mode: Automati oen Cerersion Counts 100 ConverslonCounts 100 Numbof Scns: 234 Scan Motion 13-disectioual Conversion Units Degrea Conversion Units Inhecs eal Route Positione 0.00 oeremt we Deliult Racius In. 85.43 .ot (ivot Point): N/A Medal Parameters:
 
OSA Cal 34 Calibration Ntards: IErnlatieNat..:
a--
Status Anile Direction Sean Offset Stan Offset WAT-34 lChec for lImitations due to the proximity/
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)
onfiguration of the Channel I Of N/A NA NtA VA N/A outlet nozzle intel extensie.Channcl2 Off N/A N/A N/A NVA N/A Cannld 3 On SLIC 40 ( l.72(n) + 2.00'in) 0S03403 Channel 4 On SLIC 40 (- -.ni -2.00(in) 0803404 Examination Renaria: Channel S On SLUC 40 + -1.72(:n)  
Inservice Inspection Program Request for Relief 1-4SI-19 Attachments Page      I of 2
+ o.0in 0803405 Nozzle Hoist Centedine  
    .xam Number 73 Watts Bar Unit 1 RPV-N17 Outlet Nozzle to Shell @ 158 Deg Cursor Box 1 of 1 Scan Axis                       90.76 - 92.93 Inc. Axis                        21.16 - 24.76 Depth In Material                6.63 - 7.79 Channel 1 Module Coordinates Inc. Axis                        25.86 - 29.40 Scan Axis                      102.18 - 104.35 Channel 2 Module Coordinates Inc. Axis                       25.86 -   29.40 Scan AXiS                        79.36 -   81.53 Channel 3 Module Coordinates Inc. Axis                       27.61 -
-8398 Channel6 Ot&#xa2; IVA NIA NA NtA NIA NozzleBoomRotateCrntrDllne-1I 58 Chanel 7 Off N/A N)A N/A N/A N/A Litntedlciamation dueto the oimi oftheoutletnozleintw IChnanel 8 Off NA N/A N/A N/A N/A zetension.
Scan Axis                      101.13 -   103.30 Channel 4 Module Coordinates Inc. Axis                       27.61 -
_ _ cremsat & Sea_ Poiions Actual Reeordable Indications Analyst R"mriu Sean No Increment Pesiion Sean Proitior; Yes No N/A Attaem!cStat M. Snrt S teot IS Chanan IO 2 D Y a No 1.233 500 36615 2226 3478 Channel2 0 2 i3 rftierEvlttualon
Scan Axis                        80.41 - 82.58 Channel 5 Module Coordinates Inc. Axis                        25.86 - 29.40 Scan Axis                        97.84 - 100.01 Channel S Feature Analysis                       Summary Commets                                                     2, No recordable indications chs 1, 3, & 4.
_ _ _ _ (Cannel 3 0 i3 0 Required:.
:-                          -:1r,     12 K-,r C,k -o 5-L)
:: : _ _- _ .amel 4 0 a2 0 O1 Yes G2 No____ --_=3 _ ChannelS 0 0 ArdO ve Tape/CDNo.
E4A-32
-_ _ _ __-- _Channel6 0 0 M IO AIB _.Ch =_ :il 70 0 [a Analysis Tpe/CD No.: I____a____
 
__ __D D la IVA AnalystI S iTLve / Data I OA-I :A L 05::- = =an CD'0 En p-.L. ...- ------- -, ' -'-- -' L -' ' ' -' ...
                -- 4136P                                                                         IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Flant         Watts Bar                                                   Wed Identliication; RPV-N17                         ro/Rev/C CII:         ISwT-PD1IAUrl/0ooII&2         ExRffeuN                 74 Prjet Na.           04-036S                                                     Wea Dal             atienOutlet Noz-to-Sh a. 158' DevIce Coafl ratita       WAT-WALCON-O010 Mad.Coal           08A                                                           ScanPat. DrawiPNOZOUTg!Ea                                       Data           EI aination Ti..               Surface Temnrature OF Pat A~urt~o~pr~sr~)/WTre Crlsh.3arr           /MKelyalleN/                                                 IStart         I     Fd     I       start       I     End l0sts Acquesl92oiOperat8r (s) / VW t                                     C             rlgn                       /_                                           0             9                 78               78 SeanCaatraller parmers                                   1._remsnt Axik             Planned                   Actual     Scum   Axis           Pleased           Actual             Positional Parameters Controller                                 PaR                     Lowr Liit                     500                   500         L.*crLmit                  1878           2226       Beaut Direction:           TwdUAwy Scan                                     Radial                   JpvierLimit                 36615                 36615           L mit                 3311)           3478       TransducerSize:                 1.00 Increment                     Circumferential                   knement intervl               155                               DCI                       4                           Code % ofOvedarp:                 10 Mode:                         Automati oen                       Cerersion Counts             100                               ConverslonCounts           100                         Numbof Scns:                     234 Scan Motion                       13-disectioual                 Conversion Units             Degrea                             Conversion Units         Inhecs                       eal Route Positione           0.00 an CD oeremt we                           Deliult                   Racius In.                   85.43                             .ot                                                         (ivot Point):               N/A Medal Parameters:                                     OSA           Cal 34                                                         Calibration           IErnlatieNat..:  Ntards:
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-19 Attachments Exam Number 74 Page 1 of 1 Watts Bar Unit 1 RPV-N17 Outlet Nozzle to Shell
Status                   Anile           Direction         Sean Offset       Stan Offset                         WAT-34       lChec for lImitations due to the proximity/ onfiguration of the Channel I                     Of                     N/A             NA                   NtA               VA                               N/A           outlet nozzle intel extensie.
* 15B Deg Cursor Box 1 of I Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 25.02 -26.26 36.00 -49.95 1.45 -2.01 Channel 3 34.94 -48.40 27.94 -29.18 Module Coordinates Inc. Axis SCBa Axis Module Coordinates Inc. Axis Scan Axis Channel 4 38.11 -51.55 27.94 -29.18 Charnel S 36.00 -50.95 25.54 -26.78 Feature Analysis Comments Channel 5 Summary No recordable indications chs 1, 2,& 3.Reviewed By 1 0 %oi9~SNT Level iDate %g;C&deg;E4A-34 ISwT Examination Summary Record P5e No. SRO: Summry sheet No: 368 Watts Bar Nuclear Plant Unit 1 300013 Examination Area: Reactor Pressure Vessel UnslAssenmbly:
Channcl2                     Off                     N/A             N/A                   N/A               NVA                             N/A Cannld 3                     On                 SLIC 40             (                   l.72(n)         + 2.00'in)                       0S03403                                                                               '0 Channel 4                     On                 SLIC 40             (-               - .     ni       - 2.00(in)                       0803404         Examination Renaria:
Nozzle to Shell Weld N-t8 0 Identification:
Channel S                     On                 SLUC       40         +             -1.72(:n)         +o.0in                           0803405         Nozzle Hoist Centedine - 8398 Channel6                       Ot&#xa2;                   IVA             NIA                   NA               NtA                             NIA           NozzleBoomRotateCrntrDllne-1I 58 Chanel7                      Off                     N/A             N)A                   N/A               N/A                             N/A           Litntedlciamation dueto the oimi oftheoutletnozleintw IChnanel 8                   Off                     NA             N/A                   N/A               N/A                             N/A           zetension.
Outlet Nozzle at 22-erees T N H IE Prced Exam R E Re tn C HA42I Ru i N I Ex +/- B Regart BecL. N o RamJs AUT Mwl-POIAUTt 40 AUTO --AUTObrttitess omeanrto Enmina~o ICN 2 50 AIUTaScI40 X -CB ptonned frm vessel odrell arm sted due to nozzle 49 AUT SLIC4T X -CR int.W erlenlsn.As AUTS5T X CR 9SrT-P04AUT4JOM 43.4 AUTPA16 .X CB 020001 WBtOO E-klons pedonmod ftl sous boe.Two Cod. DoMpbswle I"worktjm.
En p-.
prepared By: A IDC IP..: Isummary No: 1 l 6e, 1 13-Mar-06 1 OFI 300013 000 CD0 ,40~C I V)fi" c/3rmS
_     cremsat
_ _IH SOUTHWEST TECHNOLOGIES AUTOMATEID ULTRASONIC EXAMINATION RECORD Site/Plbat:
_                 & Sea_Poiions              Actual                       Reeordable Indications                                               Analyst R"mriu Sean No                   Increment Pesiion                           Sean Proitior;                     Yes     No       N/A Attaem!
WattsBar IWdldndficadon:
cStat M.                                               S Snrt     IS teot       Chanan IO                       2       D Y a         No 1.233                 500                   36615             2226         3478       Channel2 0                     2 i3     rftierEvlttualon
RPV-NIJ Pro1ReyAlChtJCN:
_     _           _         _                                             (Cannel 3 0           i3       0   Required:.
ISwT-PDI-AUT4/00'O Exin iti .: 43 ProietNo.:
::     :       _ _-           _       .                               amel 4 0             a2       0         O1 Yes G2 No
04-0368 Weld Daesripti On NattNu-ShQ22 (5.-6) Det esCofturattlw WAT-NOZCON-OOOI Med.CouL:
____                                          -         -       _=3       _                   ChannelS 0           0             ArdOve Tape/CDNo.
30 StanPathfDrawin SPNOZOUT Elxam Date x lftateti Time SurfaFeTan entureJ!Data Acquisition Operator (a) SNT Lvd: D. R. Kkieu/jan I H2005 StaR i nd 1 S76t Ed 1658 1702 Data AcquisItdon Scam Controllerlramete lIarmet l enad _ AAtal _Sca s lanned Actal Posititonal Parameters Controller PaR werLimit 85.42 8542 LowerLimit 5.00 5.00 Beam Direction:
  -                     _                       _         _       __--       _Channel6                     0       0         M IO         AIB                                                                         _
Twd Seen: Haed Rotate Uper Limit 107.42 10742 UpwLimtit 65.00 65.00 TransducerSize:
                                                .Ch:il =_                                                 70         0       [a Analysis Tpe/CD No.:
22mtn x45tmm Inerement:
__     __D               I____a____              D       la               IVA AnalystI S                           / Data iTLve                                                          I                   OA
BoomExtend lacronastlmevat 1.00 Resolution 0.20 Code %ofOvedap:
                                          -I :A=                                                                =                                                    L   05::-
N/Ad Modec AntometicScat ConversionCounts 100 ConversionCounts 100 NumborofScans:
L.
23 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Dgrees Boonmt RolatePttion:
  ...- -- -----   - , ' -'-- - ' L- '             ' '- ' . ..
27 00 Conection:
 
Defult Radius In. 14.50 lleixt@NaezirC(L 8398 ModuledPa raeeters:
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
30 Cal 201 Calibration Recnordr ERxaminati Notes: Status AnIe untie bea Scan Olier Sirp Oilet ___-_Chwumnd I On PA16-L (-) + 90.00(dcn)  
Inservice Inspection Program Request for Relief I-ISI-19 Attachments Page     1 of 1 Exam Number 74 Watts Bar Unit 1 RPV-N17 Outlet Nozzle to Shell
+ .00t(i) 1200201 Channd 2 On PA16-S -) + 4. Y0() + 0.00in) 120W201 Channel 3 Off N/A NtA N/A N/A N/A Chwimnd 4 Off N/A N/A N/A N/A N/A Exausinatirn Rem-rke Channel 5 Off N/A N/A N/A N/A N/A ChnndE 6 Off N/A NA N/A N/A N/A _Chanrml 7 Off N/A N/A N/A N/A N/A Chssael t Off N/A N/A N/A N/A N/A Data Analysis Inerement  
* 15B Deg Cursor Box 1 of I Scan Axis                         25.02 - 26.26 Inc. Axis                         36.00 - 49.95 Depth In Material                  1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis                        34.94 - 48.40 Scan Axis                        27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis                         38.11 - 51.55 SCBa Axis                        27.94 - 29.18 Charnel S Module Coordinates Inc. Axis                          36.00 - 50.95 Scan Axis                          25.54 - 26.78 Channel 5 Feature Analysis                       Summary Comments No recordable indications chs 1, 2,
& San Pcsi ns Actual Rtecordable Indkations Anayst Remarks Scan No s) Incramnt Position Scan Position Yes No N/A Atelamnt: Start So Start st Ctanne I 0 O1esO o ____Elye_
                                    & 3.
_No 1-23 85.42 107.42 5 .00 65.00 Channel 2 0 i3 0 Furthser Evaluation
Level   iDate %g;C&deg; Reviewed By    1    0  %oi9~SNT E4A-34
_ hinuml 3 0 n- i3 Required: Channel4 0 n la 0 Ycs 0 No__ _ ChannelS5 0 0 i3 Archive T 1/CD No.: r uCann 6 U 7 Id Cirnead 7 0 0 ! Analysis aJCD No.: _____ __ ___ ___a_ _ a 80 0 13 4 1 I Analyst / SNT Level / DatelCarlos M. Barre / 11M 07 Mar 200 \CD (74 CD , r12 R:rn i I5WTZrOe1t.
 
VrA PA.M)'I- \ K~ j AMIMi SOUTHWEST TECHNOLOGIES w AUTOMATED ULTRASONIC EXAMINATION RECORD SitWeilmt:
ISwT Examination Summary Record P5e   No.                                           SRO:                                                                 Summry sheetNo:
Wts Bar 7 Waii Ideatifidati a: RPV-NIS IPr9/RrwtChRJICN:
368                                                 Watts Bar Nuclear Plant Unit 1                                       300013 Examination Area: Reactor Pressure Vessel UnslAssenmbly:   Nozzle to Shell Weld N-t8                             0 Identification:   Outlet Nozzle at 22-erees                             T N   H IE         Prced               Exam                   R   E         Re tn     C HA42I     Ru         i       N     I       Ex       +/-   B           BecL.
ISwT-PDI-AUr4/C0dD Ex NtIO. *.: 44 Pro jeNe.s 0440368 Welelicrrptia:
Regart        N     o       RamJs AUT     Mwl-POIAUTt             40         AUTO       -   -                         AUTObrttitess       omeanrto   Enmina~o ICN2              50       AIUTaScI40   X   -   CB                 ptonned frm vesselodrell arm sted duetonozzle    000 49     AUTSLIC4T      X   -   CR                 int.W erlenlsn.
oMN.sI ht22-(64-1Ie5 Dr Con ration! WAT-NOZCON-0001
As       AUTS5T       X         CR CD0 9SrT-P04AUT4JOM         43.4     AUTPA16       . X     CB     020001 WBtOO E-klons pedonmod   ftl sous boe.
_ _ _ __*Med.Canf2 30 Scas PFtal Drwineg: SPNOZOUr xatma Date Examination Time S"rFae T t *F Data Acquisition Operator (s) I SNT Level: D. RJ jeJan I nI 06 Marc 2005 Start I 7End 7676 11713 1725 7 JData Aeqaitsition
TwoCod. DoMpbswle I"worktjm.
_Scen Controller aramdeters iacreast Alxi, Ptanad Actul Scan Axis Planned Actual Positional Paraneters Controier.
                                                                                                                                                ,40
PaR LowuLimit 15.42 85.42 LowerLimit 64.00 64.00 BeamDirtion:
                                                                                                                                                    ~C prepared By:                                                     IDC                             IP..:
Twd Scon: Head Rotate UpparLimit 107.42 107.42 UpLerLimit 125.04 125.04 Transducer Size: 22mm x45mm Irpucmt: BoosnExtnd  
A                    Isummary No:
]axtinautztleava 1.00 Resulutkua 0.20 Code % ufOverlap:
l     6e,                               1 113-Mar-06                     1 OFI                   300013 I         V) fi" c/3rmS
NIA Mode: Automatic Scan Convusion Counts 100 Conversion Counts 100 Number of Scans: 23 Scan Motion: Bi-directional Convrsion Units Inches Conversion Units Degrees sawn Rouate Positione 22-0 Codtioz Default Rodi.s J. U450 Hotst Nnzzle CIL: 83.98 ModateParaeter:
 
30 Cal 281 Calibration Records: jIaansiatiton Notes: S!:!-- A. Mr.W. 0,... nrr. Ws ntr. fwATlnl I CAnael Is On tA1-L + 90S00(d?)  
_ _IH SOUTHWEST TECHNOLOGIES AUTOMATEID ULTRASONIC EXAMINATION RECORD Site/Plbat:   WattsBar                                     IWdldndficadon: RPV-NIJ                       Pro1ReyAlChtJCN:       ISwT-PDI-AUT4/00'O         Exin iti         .:       43 ProietNo.: 04-0368                                     Weld Daesripti         On NattNu-ShQ22 (5.-6)   DetesCofturattlw        WAT-NOZCON-OOOI Med.CouL: 30                                             StanPathfDrawin       SPNOZOUT                         Elxam Date           lftateti x             Time           SurfaFeTan entureJ!
+0 I Dat20e: Chaelo2 Of, PA]6-S (ar+ 90a00adeg)  
Data Acquisition Operator (a) SNT Lvd: D. R. Kkieu/jan H2005      I                                                                   StaR   i     1 nd           S76t               Ed 1658         1702 Data AcquisItdon Scam Controllerlramete             lIarmet                       lenad          _     AAtal _Sca           s               lanned         Actal             Posititonal Parameters Controller                 PaR               werLimit                 85.42                 8542       LowerLimit               5.00           5.00     Beam Direction:                   Twd Seen:                 Haed Rotate         Uper Limit                   107.42               10742       UpwLimtit               65.00           65.00     TransducerSize:         22mtn x45tmm Inerement:           BoomExtend           lacronastlmevat               1.00                             Resolution               0.20                     Code %ofOvedap:                   N/Ad Modec               AntometicScat         ConversionCounts             100                               ConversionCounts         100                       NumborofScans:                     23 ScanMotion:         Bi-directional       Conversion Units             Inches                             Conversion Units         Dgrees                   BoonmtRolatePttion:             27 00 Conection:               Defult                                                                         Radius In.               14.50                   lleixt@NaezirC(L                 8398 ModuledPa raeeters:         30           Cal 201                                                           Calibration Recnordr   ERxaminati   Notes:
+0000(ilM) 1220 Ch aasn. 3 Off r/A KA N/A NIA NM Channel4 Off IVA NIA N/A NIA NIA ExaminationBn Rmrks Chunndl 5 Off N/A NIA N/A N/A N1A Channe 6 Off N/A MIA NIA NfA NIA Channel 7 Off 1VA N/A N/A NA NMA Chdne S Off NJA NiA N/A N/A NIA Datal Analysis Increment
Status         AnIe     untie             bea Olier Scan               Sirp Oilet                 ___-_
* Sc reltiostb Actuail Recordabkleldiceflaps AnalystRetaatb Scan io.cSt osition I Scan Position Yes No N/A Attachment S~~ ) Start Stano Statui o Ch nndl I El El O 13 Yes O No 1- 23 85.42 107.42 64.00 IU 04 Channel 2 D Ela O Fuwaher Evaluation Channel3 LI 0 E Required Chatmelz 4 n El Yea El No_ Chdne 5 0 0 El Archie TapdtCD No.i mtebnl 6 [1 Cl El 1 F , Casnnel9 7 n E"I WRI bs dqCDNo I Chavnd I 0 O ED 1 1 Analyst / 5ST Level / Date., l t Gorlot NL Barrere 1111/07 Mar 70M n A 1\Don" rfovr " W of QM ~-)En COD 0 0 -.CDi-ISwT INDICATION RESOLUTION RECORD PROJECT No.: lE: ,SHEET No: 04-0368 l Wattb Bar Unit 1 020001 eXAMINTI0N AM( SYST I COU LINE I SUBSSMLY { DNm~cATION  
Chwumnd  I         On       PA16-L           (-)             + 90.00(dcn)       + .00t(i)                       1200201 Channd 2           On       PA16-S             -)           + Y0()
\ CALIBRTION SHEET(3 RPV Nozzle to Shell Weld N-18 1200201 EXIINE NT LEVEL PROCEDURE EXAIIIN"ATlN METHOD David R. Klelnlan X t, REV. 0~TP~AT VT 0 PT El Kr , U1' 0 Krl 0 Er m E N :.INER: SNTLEVEL C WELD TYPE El MEO 43.NIA N/A 0 LONGITUDINAL OTHER: Two indications were detected and sized in the examination area of RPV nozzle-to-shell weld N-18. The indications were evaluated and found to be acceptable In accordance with the 1995196 Edition of ASME Section XI Table FW 3512-1.Indication e 1: Indication  
: 4.              + 0.00in)                       120W201 Channel 3         Off         N/A         NtA                   N/A           N/A                             N/A Chwimnd 4         Off         N/A         N/A                   N/A           N/A                             N/A           Exausinatirn Rem-rke Channel 5         Off         N/A         N/A                   N/A           N/A                             N/A ChnndE 6           Off         N/A         NA                     N/A           N/A                             N/A                                                         _
# 2: Azimuth 133.80-deg.
Chanrml 7         Off         N/A           N/A                   N/A           N/A                             N/A Chssael t         Off         N/A           N/A                   N/A           N/A                             N/A Data Analysis Inerement & San Pcsi       nsActual                          Rtecordable Indkations                                             Anayst Remarks                                       CD CD ,
158.90-deg.
(74 Scan No s)     Incramnt Position Start        So ScanPosition Start          st        Ctanne I Yes     No     N/A Atelamnt:
Flaw Location OD surface sub-surface s-dimenslon NIA 1.20" t 10.83" 10.63" Length 0.83" 0.75" 2a OA5" 0.36" a 0.45" 0.18" anl 0.50 0.24 ant 4.2 1.7 Allowable alt/ 5.2 3.7 ATTACH4MENT RESOLtT N BY SNT LEVEL DATE YES ' n R m:s& _L10 mprch?-c&deg;s REVI SR T LEVEL D AoTME iswT FORI UT 02 (RV. 07m r2 0.,E e. -Z cI 0 4 Length = 0.83" Throughwall (a) = 0.45" Surface connected IT:--/1-/L 10.83 /-10.45"1 I.,, N-18 Exam 43 inH. #1 @ 133.800 Examination  
0         O1esO o             ____Elye_                                           _No        r12R:
#43 Indication  
1-23         85.42         107.42         5.00 65.00     Channel 2 hinuml 3 0
#1 uMINlIMIIfmI'An Si s AI .wlulolw li 2. t pta~CD rndZ ao Length = 0.75" Throughwall (2a) = 0.36" a = 0.18" Sub-surface 1.20"-10.83"_ 0.36"-.-~~' D;- -;$:::-N--18 Exam 44 Ind. #2 @~1 58.900 Examination  
0 i3 n-0    Furthser i3 Required:
#44 Indication  
Evaluation 15rn Channel4     0       n       la       0 Ycs 0 No
#2*A Am.m l~0 0 t'CO Cn?UC i*11--i. .
__        _                               ChannelS5   0       0       i3 Archive T         No.:
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-19 Attachments
1/CD r       6 U uCann            Id                 7                                                                          i Cirnead 7 0         0         ! Analysis aJCD No.:         _____                               __     ___       ___
%Rumf ISwT CUSTOMER NOTIFICATION FORM i rLTY lSITE: CNIF iio: annesses Valley Authority WattsBar I WBN-001 Part l
_                                     a_ a     80         0       13         4 1               I Analyst / SNT Level / Datel Carlos M. Barre / 11M 07 Mar 200                                     \
* ISwT Findings"edXo Type otfExasmirntaka NOT Method ISwT Procedure I Rev.368 P1SlIii vr E PT [ iKr tSwT.PDi-AUT4A1O1O S-Mar-05 3 ur a ,RTO ET Cornvnnts During the Inservicexamninatlon of Outl-t Nozzleto ShellWeld N-1S, 2flaw Indications war detected.The Indications were sized and evaluated to ASME Section Xl, Paragraph IWO-3000 and determined to be acceptable.
I5WTZrOe1t. VrA PA.M)
                                                        'I-               \ K~j
 
AMIMi                                                         SOUTHWEST TECHNOLOGIES w                                     AUTOMATED ULTRASONIC EXAMINATION RECORD SitWeilmt: Wts Bar                             7     Waii Ideatifidati a: RPV-NIS                     IPr9/RrwtChRJICN:       ISwT-PDI-AUr4/C0dD       Ex               *.:
NtIO.        44 ProjeNe.s 0440368                                     Welelicrrptia: oMN.sIht22-(64-1Ie5 Dr Con ration!                       WAT-NOZCON-0001           _     _     _     __*
Med.Canf2 30                                           Scas PFtalDrwineg: SPNOZOUr                               xatma Date         Examination Time           S"rFae T           t   *F Data Acquisition Operator (s)I SNT Level: D. RJ jeJan I nI                                                   06 Marc 2005         Start I       7End         7676 11713         1725                               7 JDataAeqaitsition                                    _
Scen Controller aramdeters         iacreast Alxi,             Ptanad                   Actul     Scan Axis             Planned         Actual           Positional Paraneters Controier.                 PaR           LowuLimit                   15.42                 85.42       LowerLimit             64.00         64.00     BeamDirtion:                     Twd Scon:                 Head Rotate         UpparLimit                 107.42                 107.42     UpLerLimit             125.04       125.04   Transducer Size:         22mm x45mm Irpucmt:             BoosnExtnd           ]axtinautztleava             1.00                             Resulutkua             0.20                   Code %ufOverlap:                 NIA Mode:               Automatic Scan       Convusion Counts           100                               Conversion Counts       100                     Number of Scans:                   23 Scan Motion:         Bi-directional       Convrsion Units             Inches                             Conversion Units       Degrees                 sawn RouatePositione            22-0 Codtioz                   Default                                                                       Rodi.s J.               U450                   Hotst Nnzzle CIL:               83.98     0 En COD ModateParaeter:             30           Cal 281                                                         Calibration Records: jIaansiatiton Notes:
S!:!--         A.                         0,... nrr.
Mr.W.      Ws ntr.
fwATlnl                                   I CAnael tA1-L Is       On I Dat20e:                            + 90S00(d?) +0 Chaelo2           Of,       PA]6-S           (ar+             90a00adeg) +0000(ilM)                             1220 Ch     aasn.
3     r/AOff                        KA                   N/A             NIA                             NM Channel4           Off           IVA         NIA                 N/A             NIA                             NIA                     Rmrks ExaminationBn Chunndl 5           Off           N/A         NIA                 N/A             N/A                             N1A Channe 6           Off           N/A         MIA                 NIA             NfA                             NIA                                                                       0-.
Channel 7         Off           1VA         N/A                 N/A             NA                               NMA Chdne S           Off           NJA         NiA                 N/A             N/A                             NIA Datal Analysis Increment
* Sc reltiostb Actuail                             Recordabkleldiceflaps                                           AnalystRetaatb Scan       io.cSt osition   I       Scan Position                     Yes       No     N/A Attachment                                                                                 CDi-S~~
            )     Start         Stano       Statui         o       Ch nndl I El         El     O         13 Yes O No 1- 23         85.42         107.42     64.00       IU 04 Channel 2 D                 Ela     O Fuwaher     Evaluation Channel3 LI         0       E Required Chatmelz4            n       El           Yea El No
_                                            Chdne 5 0           0       El Archie TapdtCD No.
i           mtebnl6 [1       Cl     El           F 1
                                                        ,               Casnnel97            n       E"I WRI   bs       dqCDNo I Chavnd I   0         O     ED     1       1 Analyst / 5ST Level / Date.,
Gorlot NL Barrere 1111/07     Mar 70M l
A        n t
1\
Don"rfovr " W of QM ~-)
 
ISwT            INDICATION             RESOLUTION                       RECORD PROJECT No.:                                   lE:                                 ,SHEET                             No:
04-0368                 l                           Wattb Bar Unit 1                                         020001 eXAMINTI0N AM( SYST I COU       LINE I SUBSSMLY                   {                     DNm~cATION           \         CALIBRTION SHEET(3 RPV                                 Nozzle to Shell Weld                           N-18                         1200201 EXIINE                   NT LEVEL     PROCEDURE             EXAIIIN"ATlN METHOD David R. Klelnlan         X     t,     REV.                           VT 0~TP~AT     0   PT El Kr   , U1' 0 Krl 0 Er E m   N :.
INER:                         SNTLEVEL     C                     WELD TYPE                   El MEO                           43.
NIA                   N/A                               0 LONGITUDINAL           OTHER:                                     r2 0.
Two indications were detected and sized in the examination area of RPV nozzle-to-shell weld N-18. The indications were evaluated and found to be acceptable In accordance with the 1995196 Edition of ASME Section XI Table FW 3512-1.
                                                                                                                                            ,E    e. -Z Indication e 1:                     Indication # 2:                                                 cI 0    4 Azimuth                         133.80-deg.                         158.90-deg.
Flaw Location                         OD surface                           sub-surface s-dimenslon                               NIA                                   1.20" t                         10.83"                               10.63" Length                           0.83"                                 0.75" 2a                         OA5"                                   0.36" a                         0.45"                                 0.18" anl                         0.50                                   0.24 ant                         4.2                                     1.7 Allowable alt/                             5.2                                     3.7 ATTACH4MENT RESOLtT YES            '
REVI N BY n R         m:s&       SR                          T SNT LEVEL
_L10 LEVEL        D DATE AoTME mprch?-c&deg;s iswT FORI UT 02 (RV. 07m
 
Length = 0.83"               /L 10.83 /
Throughwall (a) = 0.45" Surface connected                       I.
                        - 10.45"1 IT:--/
1-                               ,,
N-18 Exam 43 inH. #1 @ 133.800
 
Examination #43 Indication #1 uMINlIMIIfmI'An Sis  AI .wlulolw   li
: 2. t pta~
CD rndZ ao
 
10.83" Length = 0.75" Throughwall (2a) = 0.36" a = 0.18" Sub-surface 1.20"-
_ 0.36"
                                              ~~' D
;- - ;$:::-N--18 Exam 44 Ind. #2 @~1 58.900
 
Examination #44 Indication #2
      *A                   Am.m     l~
0 0 t'CO Cn
                                            ?
UC i*11--i. .
 
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
Inservice Inspection Program Request for Relief I-ISI-19 Attachments
      %Rumf ISwT                             CUSTOMER                 NOTIFICATION                     FORM i rLTY                                       lSITE:                                                 CNIF iio:
annesses Valley Authority                                   WattsBar I                             WBN-001 Part l
* ISwT Findings "edXo                                       Type otfExasmirntaka       NOT Method               ISwT Procedure I Rev.
368                               P1SlIii             vr     E PT   [ iKr tSwT.PDi-AUT4A1O1O S-Mar-05                               3                       ur     a ,RTOET Cornvnnts During the Inservicexamninatlon of Outl-t Nozzleto ShellWeld N-1S, 2flaw Indications war detected.
The Indications were sized and evaluated to ASME Section Xl, Paragraph IWO-3000 and determined to be acceptable.
Ehamrinelon Rererence:
Ehamrinelon Rererence:
Sumrary Record 300013 Examination No. 43, Resolution Record 020001 Ssign tureoaISwT ReRtentiv , Dae:$z RA EL- 18-Mar-08 ,f U- Part II -Customer Notification
Sumrary Record 300013 Examination No. 43, Resolution Record 020001 SsigntureoaISwT ReRtentiv             ,                                                 Dae
'otfitjcation Aknmwie edby Date: Part III -Indication Ofsposition by Customer Not Required.Signatur oCusforner.tepraentive:
:$z           RA         EL-                                     18-Mar-08
Dale Part iv Reexamination cofnentr Not Required.Reexanintion  
                                            ,f U- Part II - Customer Notification
  'otfitjcation Aknmwie   edby                                                         Date:
Part III - Indication Ofsposition by Customer Not Required.
Signatur oCusforner.tepraentive:                                                       Dale Part iv Reexamination cofnentr Not Required.
Reexanintion  


==Reference:==
==Reference:==


inalse Date: CiW Closed lCuetolner ftepre tative Sign. Deft:/ 7- 3 1ow5TFOKtM NDE-e3 02 V* S71i)E4A-43 III SOUTHWEST TECENOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitsmant:
inalse                                                                             Date:
Watts Bar Weld Identification:
CiW Closed lCuetolner ftepre     tative Sign.                                         Deft:
BPV-NIS ?ro/iRevlchSICNl:
                                      /                                                         7-                 3 1ow5TFOKtM NDE-e3   02   V* S71i)
ISwT-FDI-AUT4/WOIO N.: 4 Project No.: 04-0368 WeldDiibs:
E4A-43
Otli-t-h7t22-(4-Device CnefC garation-WAT-NO72N-O001 4S Med.CoeL' 30 ScEaaPath Drwl. SFNOZOUm Dabt IExrailatlaa Time rTemperturejIF Startrchad00 End Dat Acquisition Operator (s) SNT Level: D.ftllnjan  
 
/JI 06 S l Ibd 1St IN 1ud.1727 1 1743 76 76 Data Acquisitom Scan Controller Parameters loreentAxis Puanned Actual Scanh PAamed Actual l Potiua Pareuwasetn Coltroller.
III SOUTHWEST TECENOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitsmant: Watts Bar                                     Weld Identification: BPV-NIS                   ?ro/iRevlchSICNl:       ISwT-FDI-AUT4/WOIO                       N.:         4 Project No.: 04-0368                                   WeldDiibs: Otli-t-h7t22-(4-                     DeviceCnefCgaration- WAT-NO72N-O001                                           4S Med.CoeL' 30                                           ScEaaPath Drwl.       SFNOZOUm                                 Dabt     IExrailatlaa Time                       rTemperturejIF Dat Acquisition Operator (s) SNT Level: D.ftllnjan IN          /JI                                           06                   S       l Startrchad00  Ibd 1St                                 1ud End
PaR Lwr Limut e5.42 S5.42 Lowr Limit 124.00 124.00 heanDirection:
                                                                                                                        .           1727   1     1743               76               76 Data Acquisitom Scan:
Twd Scan: Head Rotate Limit 107.42 107.42 limit 185.04 IR5.04 Transoducr Size: 22mm x 45mm Incrnmelt Bocanxtui FieLicat InYAT 1.00 Resolution 0.20 Code%ofOvdapn:
Scan Controller Parameters Coltroller.
NtA Mode: AutomaticScm Conversion Counts 100 Convesion Courts 100 Nutsero(Scans:
Incrnmelt Mode:
23 San Motion: Ri-diTectional ConvesionUnits Inldes Conversion Units Derees BooRm ePitionc 22.00 Co1tion Dewiit ins In. 140 50 Hoist g Nnzzlk CIL .3.9S odul Paraeter 30 Cal 201 Clibron Re rds niatio Not: Sinay i DirT Lei S-el I.__e Da e?0 Chanl On. PAt6-L + 90-00(dem)  
PaR Head Rotate BocanxtuiFieLicat AutomaticScm loreentAxis Lwr Limut Limit InYAT Conversion Counts Puanned e5.42 107.42 1.00 100 Actual S5.42 107.42 Scanh LowrLimit limit Resolution Convesion Courts PAamed 124.00 185.04 0.20 100 Actual 124.00 IR5.04 l        Potiua Pareuwasetn heanDirection:
; 000(in) 1200201 CaneiZ 2 On PA16-S () + 90-00(deg)  
Transoducr Size:
+ 0,00(in) 120020i Qnatei3 Off N/A NtA N/A N/A N/A Channei 4 Off N/A -N/A NtA N/A NIA _Examinn houRn Rmrks: rhennet 5 Of ff A N/A WV A N/A / NIA Cbmne e6 Off N/A NtA N/A NtA N/A Channe[ 7 Off N/A }UA NtA NIA N/A Channei S Off N/A iNtA NtA N/A N/A Data Arstyisis Incrfent &Scan Positious/Actsl Recordable loditation Anali tReeairks 9SI No.3 iaIun= Posilion l ScanPosition Yes No NMA Attachent n %-L () Srt skyl Start Siop Channel I 0 3- 0 3 Yes Mt ?O 1.23 85Q4 107.42 124.00 IS5.00 Caaad 2 0 31- 0 F-urlerEnlustion
Code%ofOvdapn:
_ Chnad 0 EiRequiredt
Nutsero(Scans:
_Channei 4 3] 3 l -i Yes E NO Chsannl5 C lArchive,.ptCNo.:
Twd 22mm x 45mm NtA 23 LI San Motion:           Ri-diTectional     ConvesionUnits             Inldes                           Conversion Units         Derees                     BooRm     ePitionc           22.00       0.o~t Co1tion                     Dewiit                                                                           ins In.             140 50                       Hoist g Nnzzlk CIL.3.9S             El C odul Paraeter               30         Cal 201                                                       Clibron Re rds             niatio Not:
_ tbnnd6 i'nIV hmad 7 L 7 R Re*sT eC No.:=Channdl C 0 Ela F slyst I SNi 1eavel 1Ulte 0 \-I 61 e-k C) I Lon )fl -tswr rran"N \v LI 0.o~ t El C C-212 i2-2
Sinay i I.__e Da e?0           DirT            S-el Lei                                                                                                                            C-Chanl               On.       PAt6-L                       + 90-00(dem) ; 000(in)                               1200201 CaneiZ2            On         PA16-S         ()           + 90-00(deg)       + 0,00(in)                       120020i                                                                           212 Qnatei3             Off         N/A         NtA                 N/A           N/A                               N/A Channei 4           Off         N/A       -N/A                 NtA           N/A                               NIA       _Examinn houRn   Rmrks:
_1_ M SOUTHWEST TECHNOLOGIES-T_ AUTOMATED ULTRASONIC EXAMINATION RECORD Sitsff/tP t Waths Bar Wdld Idettiation:
rhennet 5           Offf            A N/A               A        WV N/A         /                               NIA Cbmnee6              Off         N/A         NtA                 N/A           NtA                               N/A Channe[ 7           Off         N/A         }UA                 NtA           NIA                               N/A Channei S           Off         N/A         iNtA                 NtA           N/A                               N/A Data Arstyisis Incrfent &ScanPositious/Actsl                             Recordable loditation                                             Anali tReeairks 9SI No.3         iaIun= Posilion l           ScanPosition                   Yes     No     NMAAttachent                                                                                          i2-2 n       Srt
RPY-NI3 0 ruRtav/1mnW/CN:
                      %-L ()       skyl       Start       Siop     Channel I 0         3-     0           3 Yes       ?O Mt 1.23           85Q4         107.42     124.00       IS5.00     Caaad 2 0           31-     0 F-urlerEnlustion
ISWT-PDI-AUT4/0 amnntiNo 4S Proect N.: 040368 Weld Descrlion:
_                     Chnad       0               EiRequiredt
Octxta5ih 2r lW-U2 DefreCsfmrotlon WAT-NOZC O01 Examination N.: 46 Mod.Cwt. 30 Scn Path Drawia SPNOZOUT { Esn Date Examination Time Ssrlaee Tenwo ea *F Data Aequsiato Operator (s)ISNT Levul: D, Rt. KleaJta/Il 06Ma2005 20 Start 180 s6trt 76 Data Acquisition Scan Controller Paraneters lanrement Axis Planed Aea Scan Axis Planned Aclusi J ositional Paremeters Contreoler.
_Channei                             4 3]       3         l         -i Yes E NO Chsannl5 C                   lArchive,.ptCNo.:
PaR LowerLnilt 85.42 85.42 LowerLioit 184-00 184.00 JBea Direction:
_                                       tbnnd6 i'nIV hmad 7 L           7       R Re*sT eC No.:
Twid Sean: Head Rotate UpperLimit 107.42 107.42_ UpperLinit 245.04 _ 245.04 TrasducerSiem 22mm x 45mm Inceenat Boons Eitead hIement jnteawl 1.00 Resolution 0.20 lCode % of Oviop: MIA Mode Automatic Scan Conv~esionCounts 100 Conventirn Counts 100 Numaber ofScans'.
                                =Channdl                                           C       0       Ela           F slyst I SNi 1eavel   1Ulte     0\
23 ScanMotion:
I        Lon                              -I       61 e-k       -C))fl tswr         rran"N                               \v
Bi-dirtcionda Conversion Units Inches Conversion Units Degrees jooMRgtstpomitimo 22.00 Coetien: Deft Radius In. 14.50 iHoist @ Norzle C'L U3.98 MndnlaPsratauerr 30 Ca11201 Calibration Records: jEXasmination Notet_ Saie Aa Dieciij-.
 
StaA Offa SU. -i O'ffI0 Clni4en I On PA16-L -+ 90.00(ded  
_1_                                                       M SOUTHWEST TECHNOLOGIES
+ 0.00(in) 1200201 C:Ihanocl2 on PA16-S -+ 90.00(de + 0.OO(in) 1200201 Chunnel3 Off NtA N/A NMA N/A NIA Channel 4 Off N/A N/A N/A N/A NtA Elamination Remarks: Channel 5 Off N/A N/ N/A N/A NtA Chalnel 6 Off N/A N/A N/A N/A NtA Channel 7 Off N/A N/A N/A N/A NtA Chanel S Off N/A N/A NMA N/A NtA Data Analysis rincmeat d Scan Foslitors Actual Recordable ladlealluns
          -T_                                         AUTOMATED ULTRASONIC EXAMINATION RECORD
__ _ Analyst Remarks Scon c.us) Position I Sn Position Yes No NM Attiehowt:
{
Slent Stop Start Stop Channel I .D' E J]Yes la No 1-23 85.42 107.42 184.00 243.04 Chwuncl 2 C. i i r lurthcrEvaluation Channel 3 C n o rquired:_ _ C lh4nel C 3 E E] Ye (a No_ _ ____Channel5 C i0 ArObivet DNo.:_ _ hwnde 6 r_ O El._=_ Channe 7 C 0 Ei Analysis T Pe/CD N.: Aalyt I SNI Level I Dte: -A 1M~o t\ AMrCAs 23105 CD 0, 2. tz CD CP 0 0 CD" Px, CD CD a,;, CC)0 tz 0.0 1'IQ (E z=rTvt UT" .\K- _
0 Sitsff/tP t   Waths Bar                               Wdld Idettiation: RPY-NI3                       ruRtav/1mnW/CN:     ISWT-PDI-AUT4/0             amnntiNo                 4S Proect N.: 040368                                       Weld Descrlion: Octxta5ih 2r lW-U2 DefreCsfmrotlon                   WAT-NOZC O01               Examination N.:           46 Mod.Cwt. 30                                             Scn Path Drawia       SPNOZOUT                       Esn Date           Examination Time             Ssrlaee Tenwo ea *F Data Aequsiato Operator (s)ISNTLevul: D, Rt. KleaJta/Il                                                     06Ma2005 20         Start       180             s6trt               76 CD Data Acquisition Scan Controller Paraneters           lanrement Axis         Planed                 Aea       Scan Axis             Planned       Aclusi   J           ositional Paremeters Contreoler.                 PaR             LowerLnilt               85.42                 85.42     LowerLioit             184-00         184.00 JBea Direction:                   Twid Sean:                   Head Rotate         UpperLimit               107.42                 107.42_   UpperLinit             245.04   _   245.04     TrasducerSiem           22mm x 45mm 0,
_ m SOUTHWEST TECHNOLOGIES lump AUTOMATED ULTRASONIC EXAMINATION RECORD SiWtlmlant:
CP2.tz Inceenat               Boons Eitead         hIement jnteawl         1.00                             Resolution             0.20                   lCode % of Oviop:                 MIA Mode               Automatic Scan         Conv~esionCounts         100                             Conventirn Counts       100                     Numaber ofScans'.                 23     CD ScanMotion:           Bi-dirtcionda       Conversion Units         Inches                           Conversion Units       Degrees               jooMRgtstpomitimo               22.00 Coetien:                 Deft                                                                       Radius In.             14.50                   iHoist @Norzle C'L             U3.98 0  0 MndnlaPsratauerr               30           Ca11201                                                     Calibration Records: jEXasmination Notet                                                    CD Saie
t utsWBd tdetiliton:
_              Aa         Dieciij-.     StaAOffa        SU. O'ffI0i                      -                                                                                   "
RPV-NI1 Pro/Bev/Cbi CN: ISwT-PDI-AUT4/0/0/0 ProedtNsj 04-036C Wdd Descriftiful Out NoSh 2? 22r24.1-30 DIce Confr uratin: 'WAT-NOZCON-0001 47 Mted.Co.:
Clni4en I           On         PA16-L           -           + 90.00(ded     + 0.00(in)                     1200201 C:Ihanocl2         on         PA16-S           -           + 90.00(de         + 0.OO(in)                     1200201                                                                         Px, Chunnel3           Off           NtA         N/A               NMA           N/A                             NIA                                                                           CD Channel 4           Off           N/A         N/A               N/A           N/A                             NtA         Elamination Remarks:                                           CD a,;,
30 ScneathDfrawtnl.
Channel 5           Off           N/A         N/                 N/A           N/A                             NtA Chalnel 6           Off           N/A         N/A               N/A           N/A                             NtA Channel 7         Off           N/A         N/A               N/A           N/A                             NtA Chanel S           Off           N/A         N/A               NMA           N/A                             NtA                                                                           CC)0 0.0 tz Data Analysis                                                                                         1'IQ (E  z rincmeat    d Scan Foslitors Actual                     Recordable ladlealluns           __         _                 Analyst Remarks Scon                 c.us) Position I           Sn Position                   Yes     No     NM Attiehowt:
SPNOZOUT Xxam tDate I Exaalsadoo Time sureTmeraoT Data Acquisition Operator (0/SliT Lvet: D. R. K injan I l 06 March 2005 S14rt 1EJ 9brt l E n IS1l4' 1 IS25 76 1 76 Datb Acquisition Scan Controller Parameters Incement Atis flauned Actual Sca Axis Planned Actual Positinsl Paranetero Controller PaR LowerLimit 85.42 35.42 LowerLinmit 24400 24400 Beam Direction:
Slent           Stop       Start       Stop     Channel I           D'
Twd Sner Head Rotate Uper Limit 107.42 107.42 Upper Limit 305.04 305.04 Transducer Siz= 22mm %45mm Increment Boom Extend Inlacrementnrvel 1.00 Resolntion 0.20 Cudo%ufOvculnp:
                                                                                            .      E         J]Yes la No 1-23       85.42           107.42       184.00     243.04   Chwuncl 2 C.         ii      r   lurthcrEvaluation Channel 3 C         n       o   rquired:
N/A Modc. Aulornatic Scan Conversion Counets 100 Conversion Counts 100 NumberofSctas:
_               _                                             C lh4nel C           3       E         E] Ye   (a No
23 Scan Motion: Bi-directional Conversio Uzib Incies Conversion Units Dere8es RoOm Reoste Positionm 22.00 Correction:
_      _               ____Channel5                                     C           i0       ArObivet DNo.:
Dcsfu!t Radius It, 14.50 Hoist @ Nozzie CtL 33.9t Module Paraueters:
_       _                   hwnde6 r_           O       El
30 Cod 201 Cdibrncords:
                  ._=_                                               Channe 7 C           0       Ei Analysis T Pe/CD N.:
lExainai Notes: Set:. ..,a.... = .. flw.OF e.f of.E.f WEAring C0anncl I On PA16-L -+ 90.0(do + 00.(in) 1200201 Channel 2 Oan A16-S (- + 90.00(d) + 0.00(in) 1200201 Channcl3 Off N/A N/A N/A N/A N/A Channel 4 Off NIA N/A N/A N/A N/A Elxamination Remnaks: Channel 5 Otf N/A N/A NiA N/A NWA Channel 6 Off N/A N/A NiA N/A N/A Chanel 7 OIT NWA N/A NiA N/A N/A Chammolt Off N/A N/A N/A N/A N/A Data Analysis Increment A Scan Positions Adual Recordable Indiealions AnalystRemarks Incrnert Position Sen Pditin Yes No N/A  
Aalyt I SNI Level IDte:                                                                 -A 1M~o             t\AMrCAs 23105
=rTvt        UT"   .
                                        \K-                   _
 
_                                                       m SOUTHWEST TECHNOLOGIES lump                                           AUTOMATED ULTRASONIC EXAMINATION RECORD SiWtlmlant:       utsWBd t                                               tdetiliton:
RPV-NI1                   Pro/Bev/Cbi CN:     ISwT-PDI-AUT4/0/0/0 ProedtNsj     04-036C                                   Wdd Descriftiful       OutNoSh 2?     22r24.1-30 DIce Confruratin: 'WAT-NOZCON-0001                                       47 Mted.Co.:     30                                         ScneathDfrawtnl. SPNOZOUT                               XxamtDate    I Exaalsadoo Time                 sureTmeraoT Data Acquisition Operator (0/SliT Lvet: D.R. K injan I l                                                         06 March 2005       S14rt         1EJ           9brt         l   E   n Datb Acquisition IS1l4'   1   IS25             76         1     76 9.
Scan Controller Parameters             Incement Atis           flauned                     Actual     Sca Axis         Planned           Actual           Positinsl Paranetero Controller                 PaR               LowerLimit               85.42                     35.42       LowerLinmit         24400           24400     Beam Direction:                 Twd Sner                   Head Rotate           Uper Limit               107.42                   107.42       Upper Limit         305.04         305.04   Transducer Siz=       22mm %45mm Increment             Boom Extend           Inlacrementnrvel         1.00                                 Resolntion         0.20                     Cudo%ufOvculnp:                 N/A Modc.                 Aulornatic Scan         Conversion Counets       100                                   Conversion Counts   100                       NumberofSctas:                   23 Scan Motion:           Bi-directional         Conversio Uzib           Incies                                 Conversion Units   Dere8es                   RoOm Reoste Positionm       22.00 Correction:               Dcsfu!t                                                                           Radius It,         14.50                     Hoist @ Nozzie CtL           33.9t Module Paraueters:             30             Cod201                                          lExainai        Cdibrncords:                     Notes:
Set:.       ,a....     .. =         .. flw.OF         e.f of.E.f                       WEAring C0anncl I           On       PA16-L               -         + 90.0(do           + 00.(in)                         1200201 Channel 2           Oan         A16-S           (-           + 90.00(d)           + 0.00(in)                       1200201 Channcl3             Off           N/A           N/A               N/A                 N/A                             N/A Channel 4           Off           NIA           N/A               N/A                 N/A                             N/A     Elxamination Remnaks:
Channel 5           Otf           N/A           N/A               NiA                 N/A                             NWA Channel 6           Off           N/A           N/A               NiA                 N/A                             N/A Chanel 7           OIT           NWA           N/A               NiA                 N/A                             N/A Chammolt           Off          N/A            N/A              N/A                N/A                              N/A Increment A Scan Positions Adual Incrnert Position                Sen Pditin                      Yes      No Data Analysis Recordable Indiealions N/A  


==Attachment:==
==Attachment:==


ScanN() Stat SLOP Stat Stop aamnci I 0 El 0 D Yes El No 1-23 85.42 107Q2 244.00 305.94 Channel 2 0 L3 0 Further bsaluation Channel 3 fl (1 Ieqoirm:d ainol4 0 n o 0Yes 1 No Channel5 0 0 01 ArchivcT pdCDNo.;Channel6 0 0 1 Chemnn17 0 0 [ aAbsiseTrpCD No.:_Channel8 0 0 _ _ _ _ _ _ _ _Analyst I SlT I te Date1 M rck 1 9.co C-.4 CDt3 5: L W 4 tTj I.-,"r Tr d itt. \ -to tame. IO U)I  
AnalystRemarks                                  co CD 1
-fIH SOUTHWEST TECHNOLOGIES i AUTOMATED ULTRASONIC EXANMATION RECORD Siterflant Watts Bar Weld Identiflletioa:
C-.4 t3 ScanN()           Stat           SLOP           Stat       Stop     aamnci I       0       El       0       D Yes El No 1-23           85.42         107Q2         244.00     305.94     Channel 2 0             L3       0 Further bsaluation 5:      L Channel 3 fl                     (1 Ieqoirm:d                                                                           W ainol4 0                 n       o       0Yes 1 No Channel5 0               0       01 ArchivcT pdCDNo.;                                                                   4 tTj Channel6 0               0       1                                                                                     I.-,
BPV-N18 ?ro/PReviChV CN: ISwT-PDI-AUTr410l10 EYnunntioa Nod 48 PreetNnL:
Chemnn17 0                       0[ aAbsiseTrpCD No.:
0440368 Weld inewrit : o o -oSh2(3o4.36 Devic Coet rn*oa WAT-NOZCON-OO.t
_Channel8 0                         0                         _      _       _   _       _         _       _   _
_Examination Ked.CoaE:
Analyst I SlT I       teDate1                                                                1                                            M rck "r Tr d itt.       tame.IO U)        \   -to                                               I
30 _8an Path Drawiox: SPNOZOUT ESam Data i laaimnnatoe Time SaffrcT1npeR!E*Y Data Acquisition Operator (s) I SNT Levvii D. P. 1(iinjan Ill 06 March 2005 En Start Std 183'3 16446 7 Data Acquisition Scan Controller Patraeters Increment Axis rina.ed Artud Scan Auis lanned Actual Positional Parneter Controller.
 
PaR LowerLiait 85.42 r5.42 LowecrLimit 304.00 304.00 Beam Direction:
            -fIH                                                                   SOUTHWEST TECHNOLOGIES i                                               AUTOMATED ULTRASONIC EXANMATION RECORD Siterflant       Watts Bar                                   Weld Identiflletioa: BPV-N18                     ?ro/PReviChV CN:             ISwT-PDI-AUTr410l10             EYnunntioa Nod             48 PreetNnL: 0440368                                           Weld inewrit o :           o     -oSh2(3o4.36   Devic Coet rn*oa             WAT-NOZCON-OO.t               _Examination Ked.CoaE: 30                                           _8an       Path Drawiox: SPNOZOUT                             ESam Data           i laaimnnatoe Time                     SaffrcT1npeR!E*Y Data Acquisition Operator (s) I SNT Levvii D. P. 1(iinjan Ill                                                       06 March 2005                               Std En Start 183'3       16446                                   7 I.
Twd SI... Head Rotfte UperLimit 107.42 107.42 Upperlimit 3.00 366.00 Tandcer Size: 2mm x45mm Increment BoomExtend IucreutInterval 1.00 Resolution 0120 Code%ofOvertop:
Data Acquisition Scan Controller Patraeters             Increment Axis               rina.ed                 Artud     Scan Auis                   lanned             Actual                 Positional Parneter Controller.                   PaR           LowerLiait                   85.42                   r5.42     LowecrLimit                   304.00           304.00     Beam Direction:                       Twd SI...                     Head Rotfte       UperLimit                     107.42                 107.42     Upperlimit                   3.00             366.00     Tandcer Size:             2mm x45mm Increment               BoomExtend           IucreutInterval               1.00                               Resolution                   0120                         Code%ofOvertop:                     N/A Mod0(c'                 AutomalicScan         COnVersiOn Counts             100r                               Conversion Counts             100                         1NumberofScuws                         23 Scan Motion:             BI-directional       Conversionlinits             Inches                             Conversion Unis             Degrees                       Boom Rotate Positiow               22.00 Corectionc                   Deault                                                                           RIAdiusle.                   14.50                         H{oist ( NozIe CtL                 3.98 Module Pranmetere:               30           Cal 201                                                           Calibtion     Records!     Exaination     Nozts:
N/A Mod0(c' AutomalicScan COnVersiOn Counts 100r Conversion Counts 100 1NumberofScuws 23 Scan Motion: BI-directional Conversionlinits Inches Conversion Unis Degrees Boom Rotate Positiow 22.00 Corectionc Deault RIAdiusle.
Stanzs,;vr     Aa        rs..
14.50 H{oist ( NozIe CtL 3. 98 Module Pranmetere:
                                                .                                         ': ':A-0 Chaumel I               On       PA16-L                           + 9000(do             0.00(in)                       1200201 Channel2               Oe       PAl6-S                             + 9. 0dcK         + 0.0(1n)                       1200201 Ctalux   3             Off         N/A           N/A                   NtA             N/A                               N/A Chalmd 4               Off         N/A           N/A                   N/A             N/A                               N/A               Easaanlation Remarks Channel 5             Off         N/A           N/A                   N/A             N/A                               N/A Channdc6              Off         N/A           N/A                   N/A             N/A                               N/A (Imuad 7               Off         N/A           NtA                   NIA             N/A                               NtA Chmmetl a             Off         N/A           NtA                   N/A             N/A                               N/A Data Analysis Increment &     Scan Posttlons Actual                           Recordable Indieatlow                                                   Analyst Remarks Sea   Wos           Incrrt   IPositi;D           Scan   'osition                   Yes       No     N/A A         r.SE Olaut        i
30 Cal 201 Calibtion Records! Exaination Nozts: Stanzs,;vr rs.. Aa .': ':A-0 Chaumel I On PA16-L + 9000(do 0.00 (in) 1200201 Channel2 Oe PAl6-S + 9. + 0dcK + 0.0(1n) 1200201 Ctalux 3 Off N/A N/A NtA N/A N/A Chalmd 4 Off N/A N/A N/A N/A N/A Easaanlation Remarks Channel 5 Off N/A N/A N/A N/A N/A Channdc 6 Off N/A N/A N/A N/A N/A (Imuad 7 Off N/A NtA NIA N/A NtA Chmmetl a Off N/A NtA N/A N/A N/A Data Analysis Increment  
_ __        Stout         stop5         Start         stop     Clhonel I     0               0           DYee      0   No         _   _   _   _     _   _   _   _   _   _   _   _   _   _     _
& Scan Posttlons Actual Recordable Indieatlow Analyst Remarks Sea Wos Incrrt IPositi;D Scan 'osition Yes No N/A A Olaut r.SE i_ _ _ Stout stop5 Start stop Clhonel I 0 0 D Yee 0 No _ _ _ _ _ _ _ _ _ _ _ _ _ _ _1-23 85.42 10742 304 00 366.00 Channci 2 0 0 Funhr Evaluation
1-23             85.42       10742         304 00       366.00       Channci 2   0               0   Funhr   Evaluation           _
_Clc n c 3 n 21 Rewuired:__
Clc n c 3             n       21 Rewuired:__                           _  _ _   _   _ _ _     _   _   _ _ _ _   _ _   _   _   _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ChannOl 4 0 21 0Th Yes 0 No Chaonel 5 0 0 2 Archive l/CD No.:_ Chnnel 0 6 ffOLG 7El_ Chan 0 2i Ta a esilqd/CDNo.:
CAs ChannOl 4     0               21         0ThYes    0   No Chaonel 5     0       0     2   Archive l/CD         No.:
_ ChennelI 0 2 o AnlstdIStTLevellDate li I.CAs mrr r > wr s RRS. }
_Chnnel 6              0                   ffOLG Chan    7El_ 0               2i   a        Ta esilqd/CDNo.:
A1 I1 SOUTHIWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitelPlaat:
_                             ChennelI     0               2                   o AnlstdIStTLevellDate                                                         li mrr r     >   wr s   RRS.}
WattsBar IWeldeHfiicatio:
 
RPV-NI8 PrtJRev/CiffCN:
A1                                                         I1 SOUTHIWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitelPlaat: WattsBar                                       IWeldeHfiicatio: RPV-NI8                     PrtJRev/CiffCN:         ISwT-PDI-AUTl/YO/IA2         Rzansluttlo No.:         49 PrejectNo.: 04-0368                                     VWdId Detcriptia: 0Ou1ctNoto-           47' 2   Dgvice Configration: WAT-wALCoN.ODOI Mod.CoaL: 09                                             Sca; rPath Drawist SPNOZOUT                           Exam Datae     I     ruminain Tinme               Surface Ten peratre F Data AcquisitienOperator (a)i SNT Level: David P.. lKelaJS/           n1                                                             Start     L ]Ed             Start             End 1137         1148             78               78 Scaa Controller Parameters         lnrement Asia             Pleamed                   Actual   SensAxis              Planned           Actual             Pmlsteioal Parameters Controller                 PDA           Lower liUit                 223i                   2594       Lower Limit             90DO             9000       Beam Directjio               Cw/Ccw Scan:               arornfrarenmil       U         Jiot               295         S         2955               limi           9000             9000       Transducer Size:               1.00 Ineremet                 ldiai           Increment Interval           90                               DC1                     7                           Code % ofOverlap:                 10 Mode               Automatti Scan       Conversion Comts             I00                               Conversion Comte         100                       Nober ofScons                     9 S Mionsr Mao            Dl-directional     Conversion Uaits             Inches                           Conversion Units       Degice                     Head Rotate Posotio             0.09 Correctionr             Default           _u_                                                                   In.           85.43                     Hoist (Pivet Point):             N/A Module Paranete:                   iY         Ca 33                                                       Calibtratian Reords: Exaaeinstla Notes:
ISwT-PDI-AUTl/YO/IA2 Rzansluttlo No.: 49 PrejectNo.:
Stetes         Ant-e       Diracties       Scan totset Sten Offset                               WAT-33     [Cbecfor limntations duetothe oroxLitity/confiurxationofthe       -4 Chnmeil I           On             55           ( )               7.53(n)       - 1.05n)                           0803301       outletnozzleint     extension.
04-0368 VWdId Detcriptia:
Channel 2           On             55           (4)             4 7.53(in)         1.05(m)                         0803302 Channel 3           00         SLIC40         (H             - 9.953         - 2.87(in)                         0803303 Channel 4           On         SXC 40         (+)             + 9.95(in)       - 2.87in           _               0803304       Exsaminaton Remarks:                                           on Channel S                                                                                                                                                       3 On             OL           45)           - 10 in           -_122(                           0803305       Nozzle Cen Hoidt Poition -8 9i auodl 6             Om           N/A           N/A                 N/A             NIA                               N/A       Boam Rotate 'vzdeCenterPrsition -2200 Channel 7           Off           N/A           N/A                 NIA             N/A                               NIA       Limited examination due to the oxim ofilien outlet rnzie Channel             Off           N/A           NIA                 N/A               //1A                             NVA         +/-a     ext an. Nozzle offset 40-d ej     .K Increment h Scan Psitios Actul                               Recordable Indicaltions                                           A______________
0Ou1ctNoto-47' 2 Dgvice Configration:
Incremert Position             San Position                     Ygsa     No       NU Attedanent:
WAT-wALCoN.ODOI Mod.CoaL:
Scn No.(s)         St           Stop         Stao         S_         Channel I         O             _       &deg;Yes 0 No 5 -9         2594           2955         9000         9000       Channci2 3           Ei       O   Fwuther Evaltion Channel 3 0         0       0   Requirted Channel4O           i3       E       0 Cles_    ey                       __No Channed     0       E       E   ArchdveTape/CNo Chamedl6 0           0       13             7A/B Channe 7 03            l         Analysis Tape/CD No:
09 Sca; rPath Drawist SPNOZOUT Exam Datae I ruminain Tinme Surface Ten peratre F Data Acquisitien Operator (a)i SNT Level: David P.. lKelaJS/ n1 Start L ]Ed Start End 1137 1148 78 78 Scaa Controller Parameters lnrement Asia Pleamed Actual Sens Axis Planned Actual Pmlsteioal Parameters Controller PDA Lower liUit 223i 2594 Lower Limit 90DO 9000 Beam Directjio Cw/Ccw Scan: arornfrarenmil U Jiot 295 S 2955 limi 9000 9000 Transducer Size: 1.00 Ineremet ldiai Increment Interval 90 DC1 7 Code % ofOverlap:
C         =__8 03     03       0               N/A Analbst ISNT Level Bt   Date-x   -             x                                                                                     c awrroatn M..urea(1f1-   )
10 Mode Automatti Scan Conversion Comts I00 Conversion Comte 100 Nober ofScons 9 S Ma o Mionsr Dl-directional Conversion Uaits Inches Conversion Units Degice Head Rotate Posotio 0.09 Correctionr Default _u_ In. 85.43 Hoist (Pivet Point): N/A Module Paranete:
 
iY Ca 33 Calibtratian Reords: Exaaeinstla Notes: Stetes Ant-e Diracties Scan totset Sten Offset WAT-33 [Cbecfor limntations duetothe oroxLitity/confiurxationofthe Chnmeil I On 55 ( ) 7.53(n) -1.05n) 0803301 outletnozzleint extension.
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 Amenican Society of Mechanical Engineers (ASME)
Channel 2 On 55 (4) 4 7.53(in) 1.05(m) 0803302 Channel 3 00 SLIC40 (H -9.953 -2.87(in) 0803303 Channel 4 On SXC 40 (+) + 9.95(in) -2.87in _ 0803304 Exsaminaton Remarks: Channel S On OL 45) -10 in -_122( 0803305 Nozzle Cen Hoidt Poition -8 3 9i auodl 6 Om N/A N/A N/A NIA N/A Boam Rotate 'vzde CenterPrsition
Inservice Inspection Program Request for Relief I-ISI-19 Attachments Page    I of 2
-2200 Channel 7 Off N/A N/A NIA N/A NIA Limited examination due to the oxi m ofilien outlet rnzie Channel / Off N/A NIA N/A /1A NVA +/-a ext an. Nozzle offset 40-d ej .K Increment h Scan Psitios Actul Recordable Indicaltions A______________
'xamn Number 49 Watts Bar Unit 1 RPV-N18 Outlet Nozzle to Shell e 22 Deg cursor Box 1 of 1 Scan Axis                       90.76 - 92.93 21.16 - 24.76 Inc. Axis Depth In Material                  6.63 - 7.79 Channel 1 Module Coordinates Inc. Axis                        25.86 - 29.45 Scan Axis                      102.18 - 104.35 Channel 2 Module Coordinates Inc. Axis                       25.86 - 29.45 Scan Axis                        79.36 - 81.53 Channel 3 Module Coordinates Inc. Axis                        27.63 -
Incremert Position San Position Ygsa No NU Attedanent:
Scan Axis                      101.13 - 103.30 Channel 4 Module Coordinates Inc. Axis                         27.63 -
Scn No.(s) St Stop Stao S_ Channel I O _ &deg; Yes 0 No 5 -9 2594 2955 9000 9000 Channci2 3 Ei O Fwuther Evaltion Channel 3 0 0 0 Requirted Channel4O i3 E 0 ey Cles_ __No Channed 0 E E ArchdveTape/CNo Chamedl6 0 0 13 7A/B Channe 3 7 0 l Analysis Tape/CD No: C =__8 03 03 0 N/A Analbst ISNT Level Bt Date-x -x c-4 on awr roatn M.. urea (1f1- )
Scan Axis                        80.41 - 82.58 Channel S Module Coordinates Inc. Axis                        25.86 - 29.45 97.84 - :00.01 Scan Axis Channel 5 Feature Analysis                       Summary Comments No recordable indications chs 1, 2, 3, & 4.
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 Amenican Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief I-ISI-19 Attachments
('4       ,Z.~~~rcj\ .2Do E4A-49
'xamn Number 49 Page I of 2 Watts Bar Unit 1 RPV-N18 Outlet Nozzle to Shell e 22 Deg cursor Box 1 of 1 Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 90.76 -92.93 21.16 -24.76 6.63 -7.79 Channel 1 25.86 -29.45 102.18 -104.35 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 2 25.86 -29.45 79.36 -81.53 Channel 3 27.63 -101.13 -103.30 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 27.63 -80.41 -82.58 Channel S 25.86 -29.45 97.84 -:00.01 Feature Analysis Comments Channel 5 Summary No recordable 3, & 4.indications chs 1, 2, ('4 ,Z. ~~~rcj\ .2D o E4A-49 p-f11 l SOUTHWEST TECHNOLOGIES QiJM, AUTOMATED ULTRASONIC EXAMINATION RECORD Site/lplnt:
 
Watts Bar IWeldedntification:
p-f11                                                       l SOUTHWEST TECHNOLOGIES QiJM,                                 AUTOMATED ULTRASONIC EXAMINATION RECORD Site/lplnt: Watts Bar                                 IWeldedntification: RPV-NIS                     Prn/Raewtch l&#xb6;:         ISwT-PDI:AUTfI0/0!i&2       ExanaedaNo.;               so Pro aetNi.% 04-0368                                 WldDesripton           OutletNoz-o-Sh     220   borvie, Co.aration: WAT-WALCON-0001 Mnd.Con-L: o0A                                       S Facts   P rawtg SPNOZDUr                             Eass Date             Eamination Time                 Surface Ten peratur IF Daa Acquisition Oper()/ SWT level: Curiae M. Harren / m Kelly Daigle iN/A                                   13Mr-Stbrt                           Ed               Start             End D t rt0930         1021               78                 78 Scan Controller Parameters       Tanee     t Axis           Flanmed                 Actual     Scan                   pslanned         Actual               Peitlans Parameters                 us Coutroler.               PaR.         Lower Limit                   500                 500         LowerLimit               17S1           2226         BeernDirection:             Twd/Aeuy Scan:                   Radial         UfLertlnt                     36615               24835       Upcr Limit               3310           3478         Transducr Size:                 1.00 iaent:           a     fbrential   Iseresunt Interval           155                               DCI                     4                           Code % ofO~verlap                 10 Mode               Automatic Scan     Conversion Cwont             100                               Conversion Counts         100                         NumberofScans                   234 ScatMotit          Bi-direclional     Conversion Units             Degrees                           ConvcrsionUnits         Inches                       Head RotatePesida.             0.00 oectin                 Dcfault.       Radius h.                     88.19                                                                                   FlHoist (Pivot Point):             N/A M sdulParomateors                CSA     Cal 34                                                       Calibration Reeordr:   fEambatbo Noe.:                                                       51.
RPV-NIS Prn/Raewtch l&#xb6;: ISwT-PDI:AUTfI0/0!i&2 ExanaedaNo.;
Status         AntHe   Direction         Scam OWet         Step Offset                       WAT-34         Iieck lb rlimitatim due to thc proximityI ounigu6rtitn ofthe Channel I         OiT           NtA       NA                   N/A           N/A                             N/A           outlct onozleintegrl extension.
so Pro aetNi.% 04-0368 WldDesripton OutletNoz-o-Sh 220 borvie, Co.aration:
Channel 2         Off           N/A       NWA                   N/A           VA                               NtA Channel 3         On         SUC 40                           1.72(in)       + 2.00(in)                       0803403 Channel 4         On         SUC 40         -               -1.72m)         - 2.00(in)                       0803404           xuminationRemarks:
WAT-WALCON-0001 Mnd.Con-L:
Channel S         On         SUC 40         +                 .720m)       + 0.00(in)                       0803405         Nozzle Hoist (atline .8398 Chnnel6           Off           NtA       NA                     N/A           NIA                             N/A           NozzicroBoanfoatnCenterlino-2200 tanel 7           Off           NtA       NtA                   N/A           MA                             NtA           Lbeited examination de to the proxii of the outlet noazle itent Channe l         Off           N/A       NA                     N/A           WA                             NWA           Cxtsion. Partial exsnminatio.                                   1/0    tz Inerement & Scan P sitions Actual                           Recordable lndlcatllns                                           Analyst Bemarkts Samenesn)t Position           Scan Poition                         Yes     No       N/A   t O Yce5ne1N Scan No.(S)     Start         S   Stop rlt           sto         Channecl I1         E       Iff       D3yes 0       No 1-15t         S00           2A435       2226         3478         Channel 2   O       O3       i   Further Evaluedtia, Channel 3 0         El           Required:                                               ..
o0A S Facts P rawtg SPNOZDUr Eass Date Eamination Time Surface Ten peratur IF Daa Acquisition Oper()/ SWT level: Curiae M. Harren / m Kelly Daigle iN/A 13Mr-Stbrt Ed Start End D t rt0930 1021 78 78 Scan Controller Parameters Tanee t Axis Flanmed Actual Scan pslanned Actual Peitlans Parameters Coutroler.
Channel4EO          13       0         OYes 13 No
PaR. Lower Limit 500 500 LowerLimit 17S1 2226 BeernDirection:
__        .aan5                         0t     A       E3 AE&deg; diveTapclADNo.:
Twd/Aeuy Scan: Radial UfLertlnt 36615 24835 Upcr Limit 3310 3478 Transducr Size: 1.00 iaent: a fbrential Iseresunt Interval 155 DCI 4 Code % ofO~verlap 10 Mode Automatic Scan Conversion Cwont 100 Conversion Counts 100 NumberofScans 234 Scat Motit Bi-direclional Conversion Units Degrees ConvcrsionUnits Inches Head Rotate Pesida. 0.00 oectin Dcfault. Radius h. 88.19 FlHoist (Pivot Point): N/A M sdul Paromateors CSA Cal 34 Calibration Reeordr: fEambatbo Noe.: Status AntHe Direction Scam OWet Step Offset WAT-34 Iieck lb rlimitatim due to thc proximityI ounigu6rtitn ofthe Channel I OiT NtA NA N/A N/A N/A outlct onozle integrl extension.
CanntI6C ha_ _6     3     0         2 a            1OA/B Chsonel 7   0       Cl       A Analysis Tape/CD No.:
Channel 2 Off N/A NWA N/A VA NtA Channel 3 On SUC 40 1.72(in) + 2.00(in) 0803403 Channel 4 On SUC 40 --1.72m) -2.00(in) 0803404 xuminationRemarks:
Analyst/S fSNe L       I,      R 0evel D                       fe:
Channel S On SUC 40 + .720m) + 0.00(in) 0803405 Nozzle Hoist (atline .8398 Chnnel6 Off NtA NA N/A NIA N/A NozzicroBoanfoatnCenterlino-2200 tanel 7 Off NtA NtA N/A MA NtA Lbeited examination de to the proxii of the outlet noazle itent Channe l Off N/A NA N/A WA NWA Cxtsion. Partial exsnminatio.
Channel S    O3                            NtA IWI WMN t ca (R.Ates2                               I
Inerement  
 
& Scan P sitions Actual Recordable lndlcatllns Analyst Bemarkts Samenesn)t Position Scan Poition Yes No N/A O t Yce5n e1N Scan No.(S) Start S Stop rlt sto Channecl I1 E Iff D3yes 0 No 1-15t S00 2A435 2226 3478 Channel 2 O O3 i Further Evaluedtia, Channel 3 0 El Required:  
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
..Channel4E O 13 0 OYes 13 No__ .aan5 0t A E3 AE&deg; diveTapclADNo.:
Inservice Inspection Program Request for Relief 1-1SI-19 Attachments xam Number 50                                                 Page   l of   1 Watts Bar Unit 1 RPV-NQ8 Outlet Nozzle to Shell e 22 Deg Cursor Box 1 of l Scan Axis                       25.02 - 26.26 Inc. Axis                       36.00 - 49.95 Depth In Material                  1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis                        34.44 - 48.40 Scan Axis                        27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis                       37.55 - 51.50 Scan Axis                        27.94 - 29.18 Channel 5 Module Coordinates Inc. Axis                        36.00 - 49.98 Scan Axis                        25.54 - 26.78 Channel 5 Feature Analysis                      Summary Comments No recordable indications chs 3, 4,
ha_ _6 3 CanntI6C a 0 2 1OA/B Chsonel 7 0 Cl A Analysis Tape/CD No.: Channel S O3 NtA Analyst/S fSNe L 0evel D I, fe: R us 51.1/0 tz IWI WMN t ca (R.Ates2 I Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Inspection Program Request for Relief 1-1SI-19 Attachments xam Number 50 Page l of 1 Watts Bar Unit 1 RPV-NQ8 Outlet Nozzle to Shell e 22 Deg Cursor Box 1 of l Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan Axis 25.02 -26.26 36.00 -49.95 1.45 -2.01 Channel 3 34.44 -48.40 27.94 -29.18 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 37.55 -51.50 27.94 -29.18 Channel 5 36.00 -49.98 25.54 -26.78 Channel 5 Summary No recordable indications chs 3, 4,& 5.Feature Analysis CommentsReviewed By SNT Level F Date IMarcd 2.OS E4A-5 1
                                & 5.
__in_ 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitamilsat:
Reviewed By     ,Y                              SNT Level F   Date IMarcd 2.OS E4A-5 1
WattsBar edIdentlfcatlon:
 
RPV-N I8 Prn/RevKg1CN:
__in_                                                     1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitamilsat: WattsBar                                     edIdentlfcatlon: RPV-N I8                       Prn/RevKg1CN:         IrwT-PDI-AUTI/0/I1&2         ExaminatioeN.:         50 Project~e.e 04-0361                   _WelIDe-Srt                     eha: OutletNoz-t-Sh.S       22'       tcevCooratio,: WAT-WALCON001 MosLCsE: 08A _a                                         ls Path Drawiax: SPNOZOUT                               EXxan -Date         Exmnb aatboxlime              Surfice Temperture f Dats AequWMOpearatr(v)/SNTLeveh CaresP&.amea/m KallyDalig/N/A                                                     Mar-05           090           10E2d           S7rt           E   nd Controlter               PAR           Lower Limit                 500                     24370       LowerLimnit           1878             2226       BeanDirection:             Twd/Awy Sear:                   Radial         UpperLimit                   36615                   36615       TUperLIrnl           3310             347t       Tarasducer Size:                 1.0 Increment:         Cirutmferential     Incerremt Inteval             155                                 D                     4                           Code % of Oveap:                   10 Mode:             Autonatic Sc         CeareaCoarvertb              100Ci                                             ns     100                         Number of Sano.:                 234 Scan Motion:       Bi-diredional       Coversion Units             Degeas                               Cenven Unitsad       IRtatepPosboee                                               0.00 Correction:             Default         Raius In.                     8.19                                                                                 Hoist (Pivot Point):             N/A     to 00
IrwT-PDI-AUTI/0/I1&2 Examinatioe N.: 50 Project~e.e 04-0361 _WelIDe-Srt eha: OutletNoz-t-Sh.S 22' tcevCooratio,:
- Modal Parameters:               0SA       Cal 34                                                         Calibratle. Records: Ezamioafai     Notes:
WAT-WALCON001 MosLCsE: 08A _a ls Path Drawiax: SPNOZOUT EXxan -Date Exmnb aatbox lime Surfice Temperture f Dats AequWMOpearatr(v)/SNTLeveh CaresP&.amea/m KallyDalig/N/A Mar-05 090 10E2d S7rt E nd Controlter PAR Lower Limit 500 24370 LowerLimnit 1878 2226 BeanDirection:
States         A.tle     Direction       Scan Offsat       Step Offal                         WAT-34       Cioc for limnitations due to theproximity/ conrigir on of the Channel I         Off           MA         NM/A                 N/A             N/A                               N/A       outlet nozzle bicgral extension.
Twd/Awy Sear: Radial UpperLimit 36615 36615 TUperLIrnl 3310 347t Tarasducer Size: 1.0 Increment:
Chane 2           Of           N/A         NA                   N/A             N/A                               NIA                                     ___
Cirutmferential Incerremt Inteval 155 D 4 Code % of Oveap: 10 Mode: Autonatic Sc Cearea Coarvertb 100Ci ns 100 Number of Sano.: 234 Scan Motion: Bi-diredional Coversion Units Degeas Cenven Unitsad IRtatepPosboee 0.00 Correction:
Channel 3         On         SUC 40           -             - 1.72(in         + 2.00( rl)                       0803403 Channel 4         On         SUC 40       (-                 1.72(mn         - 2. a(I)                         0*03404       Esasiation Remars:                                                 Cl Channel5         On         SUC40           +             .172(inj         +0.00(i)                         080340S       NozzleHoist Centerline- 8391                                           I.45OO Channel 6         Off           IVA         N/A                 NMA             NtA                               N/A       Nozzle Boom Rotate Centerline -2200 CFhnel 7         Off           INA         N/A                 NA               NA                               NVA       Limited examination due to the prxmit ofthe outle nozzle integra     -
Default Raius In. 8.19 Hoist (Pivot Point): N/A-Modal Parameters:
Channel 8         Off         NtA _           A               N/A MA                                                 NtA                                                                             (/3 nctansionL Partial examination. Boom rotate ofet 4e                              -
0SA Cal 34 Calibratle.
_____[arement     AtSca. Positionus Actual                         Racordabla ladicatioes                                           Anals Remarks s     InC     t           P       Saiti                           yes Yes       No       NA Aittacment:                                                                                           Ca  -*
Records: Ezamioafai Notes: States A.tle Direction Scan Offsat Step Offal WAT-34 Cioc for limnitations due to theproximity/
Scan lo(       Start                     Sa           S st                  I ChannIellO           O       iA            Yes i. No 155 -233     24370         3665       2226         3478       Chasnel     03      0             FutherEvaluation
conrigir on of the Channel I Off MA NM/A N/A N/A N/A outlet nozzle bicgral extension.
_______       ___Channel                         3 0         M       0Required:                                                                                               ("3 C__ann__4 _la_3                             Yes YO i     No
Chane 2 Of N/A NA N/A N/A NIA ___Channel 3 On SUC 40 --1.72(in + 2.00( rl) 0803403 Channel 4 On SUC 40 (- 1.72(mn -2. a(I) 0*03404 Esasiation Remars: Channel5 On SUC40 + .172(inj +0.00(i) 080340S NozzleHoist Centerline-8391 Channel 6 Off IVA N/A NMA NtA N/A Nozzle Boom Rotate Centerline  
_Chaml 53 0           (a       0     Areive TapRCD No:
-2200 CFhnel 7 Off INA N/A NA NA NVA Limited examination due to the prxmit ofthe outle nozzle integra Channel 8 Off NtA _ A N/A MA NtA nctansionL Partial examination.
hane6 0 I____                0       121           lMAI
Boom rotate ofet 4e_____[arement AtSca. Positionus Actual Racordabla ladicatioes Anals Remarks s InC t yes P Saiti Yes No NA Aittacment:
                                                                    .Channel     C 7 0                   103Analysis Tape/CD No.:
Scan lo( Start st Sa S ChannIellO I A O i Yes i. No 155 -233 24370 3665 2226 3478 Chasnel 3 0 0 Futher Evaluation
_Ctuas l4 0             Ej         13           N/A Analyst / SNT LeYeI / Dale:
_______ ___Channel 3 0 M 0Required:
on                                                                UT               13 m55ar5A       o.S vrgouORN W.su[         )
C__ann__4
 
_la_3 YO Yes i No_Chaml 53 0 (a 0 Areive TapRCD No: I____ hane6 0 0 121 lMAI.Channel 7 0 C 1 03Analysis Tape/CD No.:_Ctuas l4 0 Ej 13 N/A Analyst / SNT LeYeI / Dale: UT on 13 m55ar5A o.S vrgouORN W.s u[ )to 00 Cl -(/3Ca -*("3 Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)Inservice Lispection Program Request fior Relief 1-ISI-19 Attachments exam Number 50a Watts Bar Unit 1 RPV-N18 Outlet Nozzle to Shell
Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)
* 22 Deg Page 1. of 1 Cursor Box 1 of I Scan Axis Inc. Axis Depth In Material Module Coordinates Inc. Axis Scan -Axis 25.02 -26.26 36.00 -49.95 2.45 -2.01 Channel 3 273.04 -286.97 27.94 -29.18 Module Coordinates Inc. Axis Scan Axis Module Coordinates Inc. Axis Scan Axis Channel 4 276.13 -290.03 27.94 -29.18 Channel 5 274.65 -288.28 25.54 -26.78 Channel 5 Summary No recordable indications ohs 3, 4,&F S.Feature Analysis Comments Reviewed By L V\SN- Level _ r7 Date la rZ.o E4A-53 ENCLOSURE 5 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)INSERVICE INSPECTION (ISI) PROGRAM VENDOR EXAMINATION AREA COVERAGE REPORT Enclosure 5 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Vendor Examination Area Coverage Report EXAMINATION A]REA COVERAGE REPORT FOR WATPS BAR NUCLEAR PLANT This appendix describes examination coverage achieved during the 2005 in-service inspection of the Watts Bar Nuclear Plant ractor pressure vessel (RPV). The examinatipns were performed using automated ultrasonic (AUI) scanning equipment and AtUT data recording/analysis systems. The target scope of the RPV examinations included 100 percent of the accessible weld and/or component length of the following:
Inservice Lispection Program Request fior Relief 1-ISI-19 Attachments exam Number 50a                                                     Page    1.of  1 Watts Bar Unit 1 RPV-N18 Outlet Nozzle to Shell
: 1) Circumfcrcntial shell welds, including the vessel shell to flange weld 2) Lower head meridional shell welds 3) Nozzle to shell welds 4) Nozzle to Safe End and Safe End to Nozzle Welds Limitations were encountered at Wats Bar while examining the vessel, nozzle to shell, and lower head shell welds due to various physical conditions, such as the bottom head penetrations, the core barrel lugs, the outlet nozzle integral extensions, the inlet nozzle inner radii, and the flange configuration.
* 22 Deg Cursor Box 1 of I Scan Axis                         25.02  - 26.26 Inc. Axis                         36.00 - 49.95 Depth In Material                  2.45 - 2.01 Channel 3 Module Coordinates Inc. Axis                        273.04 - 286.97 Scan -Axis                        27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis                         276.13 - 290.03 Scan Axis                         27.94 - 29.18 Channel 5 Module Coordinates Inc. Axis                        274.65 - 288.28 Scan Axis                          25.54 - 26.78 Channel 5 Feature Analysis                        Summary Comments No recordable     indications   ohs 3, 4,
Typically, limitations are not encountered on the nozzle to safe end and safe end to nozzle welds, except for severe inside surface contour variations, which were not encountered at Watts Bar.I Examination Coverage Requirements for Vessel Circumferential and Meridional Welds The ISwT procedures for shell weld examinations are qualified for both single- and double-sided examinations.
                                  &F S.
The double-sided technique, requiring two examination angles and four search units, is used when access is not restricted.
Reviewed By   L     V\                             SN- Level   _     Date la r7          rZ.o E4A-53
Ihe single-sided examination technique, requiring three examination angles and four search units, is utilized to provide additional coverage when access is restricted.
 
The examination coverage requiremnents for these techniques are described below.Sinrie-Sided Examination (Reflectors Oriented Parallel and Transverse to the Weld)1) The inner 3.25 inches including the weld metal and adjacent base metal for % t either side of the weld fusion lise must be completely scanned with both SLIC40 (50 and 70 degrees, shear and longitucinal waves) search units.2) The weld metal and adjacent base material in the outer volume beyond 3.25 inches must be completely scanned with both 45&deg; and 550 Duplex (45 and 55 degrees shear wave) search units.Double-Sided Examination (Reflectors Oriented Parallel and Transverse to the Weld)1) The inner 3.25 inches including the weld metal and adjacent base metal for % t either side of the weld fusion line must be completely scanned with both SLIC 40 search units.2) The weld metal and adjacent base material in the outer volume beyond 3.25 inches must be completely scanned with both 55&deg; Duplex search units.E5-1 Enclosure 5 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)Inservice Inspection Program Vendor Examination Area Coverage Report 2 Examination Coverage Requirements for Nozzle to Sheli Welds Examination of the nozzle to shell welds is performed using the techniques described above from the vessel inside surface plus a PDI-qudified Phased Aray examination performed from the nozzle bore. Coverage requirements for nozzle to shell weld examinations conducted from the vessel inside surfice are similar to those described above, except that the weld metal and adjacent base material for K" beyond the weld fusion line must be scanned with the applicable search units. The Phased Array procedure was designed to swep two sets of sound beam angles (5 through 40 degrees longitudinal wave and 35 through 45 degrees shear wave) through the examination volume from the nozzle bore and achieve fiul coverage.3 Examination Coverage Requirements for Nozzle to Safe End and Safe End to Nozzle Welds (Dissimilar Metal Welds)Examination of the Safe End (Dissimilar Metal) welds is perforned using a PDI-qualified Phased Array procedure that is designed to sweep one set of sound beam angles (60-88 degrees longitudinal wave) through the examination volume from the inside surface of the weld to achieve full coverage in four directions.
ENCLOSURE 5 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
EXAMINATION COVERAGE CALCULATION The following contains a description of the examination coverage calculation process: 1. Determine the examination scan ("x" and 'yJ) coordinates necessary to obtain 100% of the required weld coverage (reference the examination planned "x" and'y' coordinates).
INSERVICE INSPECTION (ISI) PROGRAM VENDOR EXAMINATION AREA COVERAGE REPORT
 
Enclosure 5 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
Inservice Inspection Program Vendor Examination Area Coverage Report EXAMINATION A]REA COVERAGE REPORT FOR WATPS BAR NUCLEAR PLANT This appendix describes examination coverage achieved during the 2005 in-service inspection of the Watts Bar Nuclear Plant ractor pressure vessel (RPV). The examinatipns were performed using automated ultrasonic (AUI) scanning equipment and AtUT data recording/analysis systems. The target scope of the RPV examinations included 100 percent of the accessible weld and/or component length of the following:
: 1)     Circumfcrcntial shell welds, including the vessel shell to flange weld
: 2)     Lower head meridional shell welds
: 3)     Nozzle to shell welds
: 4)     Nozzle to Safe End and Safe End to Nozzle Welds Limitations were encountered at Wats Bar while examining the vessel, nozzle to shell, and lower head shell welds due to various physical conditions, such as the bottom head penetrations, the core barrel lugs, the outlet nozzle integral extensions, the inlet nozzle inner radii, and the flange configuration. Typically, limitations are not encountered on the nozzle to safe end and safe end to nozzle welds, except for severe inside surface contour variations, which were not encountered at Watts Bar.
I       Examination Coverage Requirements for Vessel Circumferential and Meridional Welds The ISwT procedures for shell weld examinations are qualified for both single- and double-sided examinations. The double-sided technique, requiring two examination angles and four search units, is used when access is not restricted. Ihe single-sided examination technique, requiring three examination angles and four search units, is utilized to provide additional coverage when access is restricted. The examination coverage requiremnents for these techniques are described below.
Sinrie-Sided Examination (Reflectors Oriented Parallel and Transverse to the Weld)
: 1) The inner 3.25 inches including the weld metal and adjacent base metal for % t either side of the weld fusion lise must be completely scanned with both SLIC40 (50 and 70 degrees, shear and longitucinal waves) search units.
: 2) The weld metal and adjacent base material in the outer volume beyond 3.25 inches must be completely scanned with both 45&deg; and 550 Duplex (45 and 55 degrees shear wave) search units.
Double-Sided Examination (Reflectors Oriented Parallel and Transverse to the Weld)
: 1) The inner 3.25 inches including the weld metal and adjacent base metal for % t either side of the weld fusion line must be completely scanned with both SLIC 40 search units.
: 2) The weld metal and adjacent base material in the outer volume beyond 3.25 inches must be completely scanned with both 55&deg; Duplex search units.
E5-1
 
Enclosure 5 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)
Inservice Inspection Program Vendor Examination Area Coverage Report 2       Examination Coverage Requirements for Nozzle to Sheli Welds Examination of the nozzle to shell welds is performed using the techniques described above from the vessel inside surface plus a PDI-qudified Phased Aray examination performed from the nozzle bore. Coverage requirements for nozzle to shell weld examinations conducted from the vessel inside surfice are similar to those described above, except that the weld metal and adjacent base material for K" beyond the weld fusion line must be scanned with the applicable search units. The Phased Array procedure was designed to swep two sets of sound beam angles (5 through 40 degrees longitudinal wave and 35 through 45 degrees shear wave) through the examination volume from the nozzle bore and achieve fiul coverage.
3       Examination Coverage Requirements for Nozzle to Safe End and Safe End to Nozzle Welds (Dissimilar Metal Welds)
Examination of the Safe End (Dissimilar Metal) welds is perforned using a PDI-qualified Phased Array procedure that is designed to sweep one set of sound beam angles (60-88 degrees longitudinal wave) through the examination volume from the inside surface of the weld to achieve full coverage in four directions.
EXAMINATION COVERAGE CALCULATION The following contains a description of the examination coverage calculation process:
: 1. Determine the examination scan ("x" and 'yJ)coordinates necessary to obtain 100% of the required weld coverage (reference the examination planned "x" and'y' coordinates).
: 2. Multiply the delta difference of the planned axl and "y" coordinates by each other to determine the planned scan area necessary to obtain 100% of the required weld coverage for both transverse and parallel examinations.
: 2. Multiply the delta difference of the planned axl and "y" coordinates by each other to determine the planned scan area necessary to obtain 100% of the required weld coverage for both transverse and parallel examinations.
: 3. Multiply the delta difference of the actual "x" and y coordinates by ekch other to determine the actual scan area for both transverse and parallel examinations.
: 3. Multiply the delta difference of the actual "x" and y coordinates by ekch other to determine the actual scan area for both transverse and parallel examinations.
: 4. Divide the parallel actual scan area by the parallel planned scan area and the transverse actual scan area by the transverse planned scan area to determine the coverage percentage for each typ of examination.
: 4. Divide the parallel actual scan area by the parallel planned scan area and the transverse actual scan area by the transverse planned scan area to determine the coverage percentage for each typ of examination.
: 5. Compute the average of the parallel and the transverse examination values for the final coverage percentage, E5-2 Un Il Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage.,Sunmmiar  
: 5. Compute the average of the parallel and the transverse examination values for the final coverage percentage, E5-2
~.k&Wiqd um .I i 3000D1 W03-04 Lower Shell -to- SLIC 40155- Parallel 2 directions 94% Limited erxamrnation due to the Lower Middle Shell SUC 40155 Transverse 2 directions 100% proximity of the core barrel stabilizing Averaga 97% 7ugs.300002 W04-05 Lower Middle Shell SUC 40I55 Parallel 2 directions 100%-to- Upper Middle SUC 40'55 Transverse 2 directions 100%Shell Averaoe 10_%300003 WOS-06 Upper Middle Shell SLIC 40f55* Parallel 2 diredions 93% Limited examination due lo the-to- Upper Shell SLIC 40'55' Transverse 2 driections 100% outlet nozzle integral extensions and Average 97% inlet nozzle bore radiL 300026 W02-03 Hot1orn Head -to- SLIC 40655 Paralel 2 directions 76%&deg;f Limited examination due to the Lower Shell SLIC 40155 Parallel 2 directions 68% proximitfy odthe core barrel stabilIzing
 
_ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ , e r sg e 7 2 jug s .300028 WOt-02 Bottom Head Cap SLIC 40W551 Parallel 2 directions 64% Limited examination due to the-to- Bottom Head SLIC 40/55- Transverse 2 directions 67% bottom heed penetrations.
Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage
Spherical Ring Average 60%/300006 vi06407 Upper Shell SLIC 4ft55 Parallel 2 directions 100% Limited examination due to the-to- Range SUIC 40'55 Transverse 2 dIrections 89% flange design._ _ _ _ _ _ _ _ _ _ _A verage 95% _ _ _ _ _ _ _ _ _ _ _300033 W2A Lower Head SLIC 4@55 Parallel 2 directions 88% Limited exaninalion due l the Meridional 0 o SUC 415 Transverse 2 dections 70% bottom heed penetrealtons end core Average 79% barrel stablizing tugs.300008 W2B Lower Head SUC 48t55 Parallel 2 directions
    .,Sunmmiar ~.k&Wiqd   um .       I     i (D
: 95. UmLiled examination due to the Medional e 6W SUC 4055- Transverse 2 directions 82% bottom head penetrations and core Average 84% barrel stabilizing lugs.300009 W2C Lower Head SUIC 40/55- Paralel 2 directions 85% LImited examination due to the Medrilonal 0 120 SUC 40I5 Transverse 2 directione 85% bottom head penetratons and core Average 85% barrel stabilizing luge.300034 vV20 Lower Head SUIC 40/55- Parallel 2 directions 85% Limited examination due to the Merdional 0 180 Suc 40/55 Transverse 2 directions 85% bottom head penetrations and core Average 85% barrel stabilizing lugs.30001 t W2E Lower Head SLUC 40155- Parallel 2 directions 78% LUmited examIniathon due to the Merdional 0 240 SLIC 40t55 Transverse 2 directions 61 % bottor head permrations and core Avefa 69% barrel slablhizing lIgs.300012 W2F tower Head SLIC 40W55 Parallel 2 directions 73% LImited examination due to the Meridional 0 300 SLIC 40/55- Transverse 2 directions 81% bottom head penetretlons and core I__ ____Avae 67% barrel stabilizing kegs.(D 0 r tzi 1_0 Ft 0) r o) o 0 rt o : H (D 0 )(3 oD H ii -~Ft r cW tZl CY, Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage Summary Wel .Yltr Id. .l a 300013 N-1e Outlet Nozzle SUC 40 Parallel 2 diredins 0 Lmited examination due to th rozle-to. SheS C 22 SLIC 40155 Transverse 2 directions 51% Irlegrl extenson.PA18 Paralel (Bore) I direclion 100%_ _ _ ___ _ _ Aveage 75%300014 N-14 Inlet Nozzle SUC 40 Pa l 2 direWions
3000D1       W03-04         Lower Shell -to-           SLIC 40155-         Parallel     2 directions 94%   Limited erxamrnation due to the Lower Middle Shell           SUC 40155         Transverse     2 directions 100% proximity of the core barrel stabilizing     0              r Averaga     97%   7ugs.
: 96. Lmited examination due to the nozzle-to- Shel 6or SLIC 40155 Transverse 2 directions 100% inner radlus.PA-IS Parallel (Bore) I directIon 100%Ave"ge 99%300101 N-12 Inlet Nozzle SLJC 40 Parallel 2 directions 96% Limited examiatllon due to the nozzle-to- Shell a 113- SUC 40t55- Tranverse 2 directions 100% Inner radius.PA-I8 Parallel (Boe1) I direction 100%... ._._Average S9%300016 N-17 Outlet Nozzle SLIC 40 Parallel 2 diredions 100% Unmted examination due to the nozzle-to- Shell @ 158W SLIC 4QF55- Transverse 2 directions 51% Integral eodension.
300002     W04-05         Lower Middle Shell           SUC 40I55           Parallel     2 directions 100%
PA-IS Parallel (Bare) I direction 100%_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _A v errage 76%300017 N-1 Outlet Nozzle SLIC 40 Parallel 2 directions 100% LUmited iasmination due to the nozzle 4oShel / 202' SUCA4W55 Tnsvere 2 directions 51% Inlegral extension.
                                  -to- Upper Middle           SUC 40'55         Transverse     2 directions 100%
PA-kt6 Poarle (Bore) 1 direton 100%Average_ _ _ _76% _ _ _ _ _ _ _3D0018 N-13 indet Nozzle SSUC 40 Permlkl 2 dirmctons 96% LUmited examination due to the iozzle-to- Shell 6 247 SLIC 40t55 Transverse 2 directions 100% iner radlus.PA-i6 Parallel orel I direction 100%_____ _______ ________ ______ Aerge 99 300019 N-11 inlet Nozzle SUC 40 Parallel 2 directions 96% LUtlmed sxaminatlon due to the nozz-to-Shell  
Shell                                                   Averaoe   10_%                                                   tzi 300003       WOS-06       Upper Middle Shell           SLIC 40f55*         Parallel     2 diredions   93%   Limited examination due lo the
@ 293' SUC 40W55 Transverse 2 directions 100% Inner radius.PA-S10 paraipd (Bore) I dlrecion 100%_ Average 99% _300020 N-iS Outlet Nozzle SLIC 40 P Irallel 2 directions 100% Llrnted xnanaon due to the nozzle-to- Shell @ 338' SUIC 40W55 Transverse 2 directions 61% ntegrl extension.
                                    -to- Upper Shell         SLIC 40'55'       Transverse     2 driections 100%   outlet nozzle integral extensions and Average     97%   inlet nozzle bore radiL 300026       W02-03         Hot1orn Head -to-         SLIC 40655           Paralel     2 directions 76%&deg;f Limited examination due to the Lower Shell             SLIC 40155           Parallel     2 directions 68%   proximitfy odthe core barrel stabilIzing         1_0 300028
PA18 Parallel (Boe) 1 direction 100%Average 7Te%(D H-r31 n P) t t (D-F H H-I-Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage 300058 N-181-E Outlet Nozzle PA 22 Parallel 2 directions 100%-b.l.pe 22' PA22 Trantsverse 2 directIons 100%Average 100%300054 N-14-SE Elbow -to- Inlet PA 22 Parallel 2 directions 100%Nozzle 4 Or PA 22 Transverse 2 direcdons 100%_ Average 100%300052 N-12-SE Elbow -to- Inlet PA 22 Parallel 2 directions 100%Nazze 113 PA22 Transverse 2 direrDons 100%_ Average 100%300057 N-17-SE Outlet Nozzle PA 22 Parallel 2 directIons 1O0Y%O-Pipe @ 158 PA 22 Transverse 2 directlcns 100%Average 100%300056 N-1S-E Outet Nozzle PA22 Parallel 2 directions 100%i-to-Pipe @ 202 PA 22 Transverse 2 directions 100%Average 100%300053 N-13-SE Elbow -to- Inlet PA 22 Parallel 2 diredto, 100%Nozzle @ 24r PA 22 Transverse 2 directions 100%_ Average 100%300051 N-11-SE Elbow-to-Inlet PA22 Parallel 2 directions 100%Nozzle C 293- PA 22 Transverse 2 diractons 100%Ave__ge 100%300055 N-15-SE Outlet Nozzle PA 22 ParaIlel 2 directione 100%-to-Pfpe 4 338 PA 22 Transverse 2 dIrections tO0X Average 1O0%Ln (PT 0 l-jt n r 0 0 4 (D (D 11 rt En, o oI F _CD En Prepared by.SNT Level:Date:I a ;Z , C) C) S 7 ENCLOSURE 6 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)INSERVICE INSPECTION (ISI) PROGRAM ISI DRAWINGS TO SUPPORT RELIEF REQUEST 1-ISI-17, 1-ISI-18, AND 1-ISI-19 1. Drawing ISI-0427-C-01
_ _ __                             _ _ _ _   _ __  __  _   __ __  , er sg e   72    jug s .
: 2. Drawing ISI-4027-C-06 E 6-1 lEFERENCE ORA WINGS I a V!q TEGt-eo P NAL MATERIAL SPECIFICATIONS SEE SMfEC 6 ASff CC-t (EOJIALENT)
WOt-02         Bottom Head Cap             SLIC 40W551         Parallel                                                                     Ft Un                                                                                              2 directions 64%   Limited examination due to the
Mo TEs I. W4-05, S A BELTLINE REGIf 6J DO.3. FOR CONTINVATISNS OF MAIN L"CY REACTOR COANT PIPING SEE 4. THIS ORA WINO SERIET SUPERCEDES DW.4B51-A OfEETS f TO 7.W cn p (D (D rt 0 Fh H (D1H I z H-t cE H CJ11.Hrtt I-_j HO C12e H (t 1'O CO H1 Mtl H I-cn" H1 l-I HC rt 0 O (QD I)M t i Ort (D t- tt PS Q Fl En (D-OUTLET NOME EWDS NIt NI6 N~i L L O 1 ..I .Le I I MQ L 1_ rCA a LUV 1_ _ _MflTS LL1. A~L ja to~rt , Rf l w er to WATTS I A NMULfrA PL AN I ReACTro VESSEL (StAN KE/ DS)I..,_,.,,, ,,,# I ;e-FI&#xa2;4~At sDfif-r. A. I ISIt-0427-C-at D
                                    -to- Bottom Head           SLIC 40/55-       Transverse     2 directions Il                                                                                                            67%   bottom heed penetrations.
SEAL FLANGE SU1R-IJI.22'R NOW.' 'LXQOPP 2 N 2-SE LoOw 4.4 NI -SE 6 02 0 REF lINLETy REFERENCE DRAWINGS VENOM TEOWICAL JANUAL RV MANlALV t TRACT NO. 71 DM5 AOFS 30 FT SW) NOZZLE REFEOEi -I lA 7TERIAL SPEtIIFICA7TIC SHELL SA-50f CL. 2 LOVER READ SA-"NJ OR. O Ct. I NO2ZLE INLET/OUTLET sA- OB CL. 2 ASNE OU-t (CfQUIVALENT)
Spherical Ring                                               Average     60%/
CR2 -54f11-I'738-jreS If(15.7'755-153U4 (F15.7.2)0. '. If 0-SE .420 700 NO WAs DELA1 SE t. WELO LOCATIONS DI&NsCtONS ARE TO WELD C.2. REACTOR VESSEL wa23'ZL soPE OE To PIPE 2 LD IDO'S ARE SHOW rN RC MAIN LOOP 0 ON-2547-6.
300006     vi06407           Upper Shell             SLIC 4ft55           Parallel     2 directions 100%   Limited examination due to the
THESE ARE AWJE SECTIOW XI EXAM CA IGSORY 8-J. PIPE WELDS.(I... RCF-M-1-)-3. REACTOR VESSEL. Nl2LE TO SAFE EW EWD TO'$ SHOWOIN THIS DOO ARE ASW1 $ECT1ONd Xi EXAM CArTEGoy -F, DISSIMILAR E7TAL WELDS. I. Nte-SE)SU ttFPPORT ETlRfLUCrt1JRECalPUSNT
                                        -to- Range             SUIC 40'55         Transverse     2 dIrections                                                   0)      r 89%   flange design.
: 10. )A W)(D (li Un rt 0 FF H wdcn (D"-H- tj (Dh-t-b 0)H I H-J.U)C)-13 Hrt H0 CH Hr H'0 91, I F-O Ii (D -(DDP 0 pi H.'< Z (D H-(-1 tH, j H 2(D F- F C 0 t rt rH UE)F-DETAIL A -/IA-CC (SIX AT-TACWZAT  
300033        W2A              Lower Head
)( E SPOfrr SUIDE SEE NOTE 4 A' L I&#xa3;a 1r&#xa2;1 _k-*trI'jt r Ain:- 40000 -;A C A@ ; rr.! rr I O S I l ill. A I Arr TDA*S' VALLEY AUWhOATY WA TTS BAR NUCLEAR PLANT UNIT F REACTOR VESSEL INTERIOR VIEW 14 Lr. g11 Pr t 77: rJf Jrrr~.on00, as I JS1-O457-n-06 t7}}
_A_ _ _ _ _
verage    95%      _     _   _   _   _   _ _   _  _   _ _ o)  o  0  rt SLIC 4@55           Parallel     2 directions 88%   Limited exaninalion due l the               o      :  H Meridional 0 o             SUC 415           Transverse     2 dections   70%   bottom heed penetrealtons end core Average (D
300008                                                                                                  79%   barrel stablizing tugs.
W2B             Lower Head             SUC 48t55           Parallel     2 directions 95. UmLiled examination due to the                   0)
Medional e 6W               SUC 4055-         Transverse     2 directions 82%   bottom head penetrations and core 300009 Average     84%   barrel stabilizing lugs.
W2C             Lower Head             SUIC 40/55-         Paralel     2 directions 85%   LImited examination due to the Medrilonal 0 120             SUC 40I5         Transverse     2 directione                                                       (3 85%   bottom head penetratons and core 300034        vV20            Lower Head Average     85%   barrel stabilizing luge.                     oD              H SUIC 40/55-         Parallel     2 directions 85%   Limited examination due to the Merdional 0 180             Suc 40/55         Transverse     2 directions                                                   ii        -~
85%   bottom head penetrations and core         Ft          r 30001 t      W2E              Lower Head Average     85%   barrel   stabilizing lugs.                             cW SLUC 40155-         Parallel     2 directions   78%   LUmited   examIniathon due to the Merdional 0 240             SLIC 40t55       Transverse     2 directions 61 %   bottor head permrations and core Avefa       69%   barrel slablhizing lIgs.
300012       W2F             tower Head               SLIC 40W55         Parallel     2 directions 73%   LImited examination due to the Meridional 0 300             SLIC 40/55-       Transverse     2 directions   81%   bottom head penetretlons and core
____Avae I__                                               67%   barrel stabilizing kegs.
 
Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage Summary        .Yltr WelId.      . l                                                    a 300013        N-1e                    Outlet Nozzle        SUC 40            Parallel    2 diredins      0   Lmited examination due to th rozle
                                        -to. SheS C 22        SLIC 40155      Transverse    2 directions  51%  Irlegrl extenson.                          (D H-PA18        Paralel (Bore)  I direclion 100%
300014        N-14                                                                          Aveage      75%
Inlet Nozzle         SUC 40           Pa    l    2 direWions
                                        -to- Shel 6or                                                        96. Lmited examination due to the nozzle SLIC 40155       Transverse     2 directions 100%
PA-IS                                            inner radlus.
Parallel (Bore) I directIon 100%
300101        N-12                                                                          Ave"ge      99%                                                     r31 Inlet Nozzle         SLJC 40           Parallel    2 directions
                                        -to- Shell a 113-      SUC 40t55-                                    96%  Limited examiatllon due to the nozzle Tranverse      2 directions 100%   Inner radius.
PA-I8        Parallel (Boe1) I direction 100%
tZl            ...      ._._Average CY,  300016        N-17                    Outlet Nozzle                                                     S9%
SLIC 40           Parallel   2 diredions  100%   Unmted examination due to the nozzle   n      P)t  t
                                        -to- Shell @158W        SLIC 4QF55-     Transverse    2 directions 51% Integral eodension.
PA-IS        Parallel (Bare) I direction 100%
__ _  __ _    __  __ __ _  _ _ _A 300017                                                                                        v errage  76%
N-1                    Outlet Nozzle         SLIC 40         Parallel     2 directions 100%   LUmited iasmination due to the nozzle         (D-F 4oShel / 202'          SUCA4W55        Tnsvere        2 directions 51% Inlegral extension.
PA-kt6      Poarle (Bore)   1 direton  100%
_   _ _76%
                                                                                                                                                              -  H 3D0018        N-13                    indet Nozzle        SSUC 40 Average_            _ _       _     _ _     _
Permlkl      2 dirmctons  96%    LUmited examination due to the iozzle
                                        -to- Shell 6 247        SLIC 40t55      Transverse    2 directions 100%   iner radlus.
PA-i6        Parallel orel    I direction 100%                                         03-300019        N-11                    inlet Nozzle                                         Aerge      99                                              H-SUC 40           Parallel    2 directions 96%
                                        -to-Shell @ 293'        SUC 40W55                                          LUtlmed sxaminatlon due to the nozz Transverse     2 directions 100% Inner radius.
PA-S10      paraipd (Bore)  I dlrecion  100%
300020        N-iS                    Outlet Nozzle                                         Average    99%      _
SLIC 40         P Irallel    2 directions 100%
                                        -to- Shell @   338'                                                       Llrnted xnanaon due to the nozzle SUIC 40W55       Transverse     2 directions 61%     ntegrl extension.
PA18        Parallel (Boe)   1direction  100%
Average     7Te%
 
I-Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage 300058    N-181-E        Outlet Nozzle         PA 22      Parallel 2 directions 100%
                                -b.l.pe    22'       PA22      Trantsverse 2 directIons 100%        0 Average    100%
300054    N-14-SE        Elbow -to- Inlet      PA 22      Parallel 2 directions 100%       l-jt    nr Nozzle 4 Or          PA 22    Transverse  2 direcdons  100%
_                                                              Average    100%
300052    N-12-SE        Elbow -to- Inlet      PA 22       Parallel 2 directions 100%
Nazze      113        PA22    Transverse  2 direrDons  100%
_                                                    Average   100%
300057    N-17-SE         Outlet Nozzle        PA 22       Parallel 2 directIons 1O0Y%
O-Pipe @ 158            PA 22   Transverse 2 directlcns 100%
Average   100%             0 300056    N-1S-E          Outet Nozzle          PA22        Parallel 2 directions 100%i    0 Ln (PT                            -to-Pipe @ 202          PA 22    Transverse 2 directions 100%   4 Average   100% (D 300053    N-13-SE       Elbow -to- Inlet      PA 22       Parallel 2 diredto,  100%
Nozzle @24r            PA 22     Transverse 2 directions 100%
_                                                        Average   100%
300051    N-11-SE        Elbow-to- Inlet        PA22       Parallel 2 directions 100%
Nozzle C 293-         PA 22     Transverse 2 diractons  100%
Ave__ge    100%               (D 300055    N-15-SE         Outlet Nozzle        PA 22       ParaIlel 2 directione 100%               11  rt
                              -to-Pfpe 4 338          PA 22     Transverse 2 dIrections tO0X              En, Average     1O0%
oIo              F_
CD En Prepared by.
SNT Level:
Date:I              a    ;Z, C)C) S 7
 
ENCLOSURE 6 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
INSERVICE INSPECTION (ISI) PROGRAM ISI DRAWINGS TO SUPPORT RELIEF REQUEST 1-ISI-17, 1-ISI-18, AND 1-ISI-19
: 1. Drawing ISI-0427-C-01
: 2. Drawing ISI-4027-C-06 E 6-1
 
lEFERENCEORAWINGS I    a V!qTEGt-eo            P  NAL MATERIAL SPECIFICATIONS SEESMfEC6 p
ASff CC-t (EOJIALENT)
(D (D
MoTEs                                                      rt I. W4-05,         S ABELTLINE REGIf    6J          DO.
0 Fh          HC rt H
: 3. FORCONTINVATISNS          OF MAINL"CY              (D1H    (QD  I)
REACTOR      COANT PIPING SEE                                 0 O
: 4. THIS ORA     WINO SERIET SUPERCEDES DW.4B51-A OfEETS f TO 7.
Mt i I z W                                                                                   H-    (DOrt t- tt cn                                                                                t   cE H
PS CJ11.
H (t I-_j Hrtt
  -OUTLETNOME EWDS                                                                  1'O NIt NI6 CO H1   Q  Fl N~i                                                                            En Mtl HO C12e MQL    1_  a rCA 1_ LUV cn"
_    _MflTS                  I-L L O I1 ..         .Le I
H1 I                       Hl-LL1.                           A~L ja   to~rt , Rfl w er   to (D
I WATTSI      A     NMULfrA         PL AN I ReACTro VESSEL (StAN KE/ DS)
I..,_,.,,,                     ,,,#
I;e
                                                  - FI&#xa2;4~At           sDfif
                      -r.       A. I         ISIt-0427-C-at                 D
 
REFERENCEDRAWINGS VENOMTEOWICALJANUAL SEAL                   RV MANlALV      t      TRACTNO. 71CR2-54f11-I FLANGE SU1R                                           DM5AOFS30'738-jreS If(15.7
                                                                                                              '755-153U4(F15.7.2)
FT0. '. If
        -IJI.22'R NOW.                                                   SW) NOZZLEREFEOEi SE            I      .420 700NO
        '      'LXQOPP 2 N 2-SE                                             lA7TERIALSPEtIIFICA7TIC WAs                                      (D SHELL LoOw4.4 NI -SE                                                 SA-50f CL. 2                                                             Ii 6 02 0 REF                                                    LOVERREAD                                                      (li SA-"NJ OR. O Ct.       I lINLETy                                        DELA1                  NO2ZLE INLET/OUTLET                                           Un sA- OB CL. 2 rt ASNEOU-t (CfQUIVALENT)
SE 0FF          (D -
: t. WELOLOCATIONS            DI&NsCtONS       ARE TO WELDC.                 H
: 2. REACTOR         VESSELwa23'ZLsoPE OE To PIPE                       wdcn        0    pi 2 LD IDO'SARE SHOW         rN RC MAINLOOP 0                     (D"-
ON-2547-6. THESEAREAWJESECTIOW                    XI                       (DDP EXAM CAIGSORY          8-J. PIPE WELDS.
(I...RCF-M-1-)                                                   H- tj
                                                                    -3. REACTOR VESSEL. Nl2LE TO SAFE EW EWD                             (Dh-      H.'<    Z TO'$ SHOWOINTHIS DOOAREASW1 $ECT1ONd Xi EXAMCArTEGoy -F, DISSIMILAR E7TAL                             t-b 0)
WELDS.I.               Nte-SE)
SU ttFPPORT ETlRfLUCrt1JRECalPUSNT             10.          )
H J.U)
W)                                                                                                                                                           (D A
I    H- H H- 2(D
(-1 tH, j F-F C)-13 91, Hrt 0 t  rt H0 CH I            C Hr H
F-O
                                                                                                                                              '0             rH
                                                                          ' L I&#xa3;a 1r&#xa2;1_k-
                                                                              *trI'jtr    Ain:-
40000          -   ;A C A@ ;          rr
                                                                            .!  rr I O S Il          ill.        AI          Arr                    UE) F-TDA*S' VALLEY        AUWhOATY WATTS BAR NUCLEAR PLANT DETAILA            (SIX-/IA-CC AT-TACWZAT
                                                                  )                               UNIT F REACTOR VESSEL 14
( E SPOfrr SUIDE                                                     INTERIOR VIEW SEE NOTE 4       A                                                                     g11 Pr t rJf          Jrrr Lr.
77:
                                                                          ~.on00,       as   I     JS1-O457-n-06                       t7}}

Latest revision as of 10:32, 14 March 2020

American Society of Mechanical Engineers (ASME) Inservice Inspection (ISI) Program Request for Relief 1-ISI-16, 1-ISI-17, 1-ISI-18, and 1-ISI-19
ML060300405
Person / Time
Site: Watts Bar Tennessee Valley Authority icon.png
Issue date: 01/25/2006
From: Pace P
Tennessee Valley Authority
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML060300405 (177)
v • d • e


Text

Tennessee Valley Authority, Post Office Box 2000, Sprng City, Tennessee 37381-2000 JAN 2 5 2006 10 CFR 50.55a U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D.C. 20555-0001 Gentlemen:

In the Matter of ) Docket No. 50-390 Tennessee Valley Authority )

WATTS BAR NUCLEAR PLANT (WEBN) UNIT 1 - AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) INSERVICE INSPECTION (ISI) PROGRAM REQUEST FOR RELIEF 1-ISI-16,, 1-ISI-17, 1-ISI-18 AND 1-ISI-19

Reference:

Watts Bar Nuclear Plant (WBN) Unit 1 - American Society Of Mechanical Engineers (ASME)Section XI Inservice Inspection (ISI) Summary Report For The Sixth Cycle Of Operation dated June 23, 2005.

The purpose of this letter Ls to request relief from ASME Section XI Code required examinations due to limitations which were identified in the WBN Unit 1 Cycle 6 Refueling Outage.

These requests for relief are being submitted in accordance with 10 CFR 50.55a(g)(5) (iii).

TVA stated in the above referenced report that four requests for relief were required to be written for components examined during the inspection and those requests would be submitted under separate letter. The required examination coverage could not be achieved due to configuration of a safety injection system piping weld and the configuration of several welds on the reactor vessel.. provides request: for relief 1-ISI-16 for the safety injection piping weld. Enclosures 2, 3 and 4 provide request for relief 1-ISI-17 through 1-ISI-19 for the reactor vessel welds. These examinations were performed by a contract vendor as part of the 10-year ISI reactor vessel examination.

Included in Enclosures 1 through 4 are the examination data reports for the described component. Enclosure 5 provides the Pared on BycWdpiw

U.S. Nuclear Regulatory Commission Page 2

'JAN 2 5 2006 Vendor Examination Area Coverage Report for the components described in Request for Relief 1-ISI-17 through 1-ISI-19. provides the ISI Weld Location Drawings for the components described in request for relief 1-ISI-17 through 1-ISI-19.

There are no regulatory commitments associated with this submittal. If you have any questions concerning this matter, please call me at (423) 365-1824.

Sincerely, P. . Pace Manager, Site Licensing and Industry Affairs Enclosures

1. Request for Relief 1-ISI-16 for a Safety Injection System Piping Weld
2. Request for Relief 1-ISI-17 for the Reactor Vessel Bottom Head to Lower Shell Circumferential Weld and Bottom Head Cap to Bottom Head Spherical Ring Circumferential Weld
3. Request for Relief 1-ISI-18 for the Reactor Vessel Meridional Welds
4. Request for Relief I-ISI-19 for the Reactor Vessel Outlet Nozzle to Vessel Welds
5. Vendor Examination Area Coverage Report
6. ISI Weld Location Drawings cc: See Page 3

U.S. Nuclear Regulatory Commission Page 3 IJAN 25 2006 Enclosures cc (Enclosures):

NRC Resident Inspector Watts Bar Nuclear Plant 1260 Nuclear Plant Road Spring City, Tennessee 37381 Mr. D. V. Pickett, Senior Project Manager U.S. Nuclear Regulatory Commission MS 08G9a One White Flint North 11555 Rockville Pike Rockville, Maryland 20852-2738 U.S. Nuclear Regulatory Commission Region II Sam Nunn Atlanta Federal Center 61 Forsyth St., SW, Suite 23T85 Atlanta, Georgia 30303

ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 Summary:

This request for relief addresses Safety Injection System (SIS) circumferential pipe weld, SIF-D092-15.

The design configuration of the subject austenitic piping weld provides single side access for examination. Single side access precludes meeting the examination coverage and qualification demonstration requirements required by 10 CFR 50.55a(b)(2)(xv)(A) and (xvi)(B).

An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations and materials of the subject weld. The design configuration and materials used limits the best effort ultrasonic examination to approximately 50 percent for tee to elbow weld, SIF-D092-15. It was concluded that performance of an ultrasonic examination of essentially 100 percent of the lower one-third of the subject circumferential pipe weld would be impractical.

The maximum extent practical ultrasonic examination of the subject weld provides reasonable assurance of an acceptable level of quality and safety because the information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the weld. Therefore pursuant to 10 CFR 50.55a(g)(5)(iii), it is requested that relief be granted, for the first inspection interval.

This request for relief is similar to a previous request, 1-ISI-15, which was submitted by WBN requesting relief to be granted for two other piping welds where code coverage could not be obtained. Request for relief, 1-ISI-15, was approved in NRC safety evaluation dated January 25, 2005 (TAC Nos. MC2368 and MC2369).

System/Component(s) for Which Relief is Requested:

  • Code Class 1, 6-inch Safety Injection System Tee to Elbow Weld.
  • Weld Identifier: SIF-D092-15.
  • Materials: 14-inch x 14-inch x 6-inch Tee - Schedule 140, SA-403, WP 316.
  • 6-inch Elbow - Schedule 140, SA-403, WP 316.

Reference ISI drawing CHM-2758-C-10.

El-l

ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 Code Requirement:

WBN's Code of Record is ASME Section XI, 1989 Edition.

ASME Section XI, 1989 Edition and WCAP-14572, "Westinghouse Structural Reliability and Risk Assessment (SRRA) Model for Piping Risk Informed Inservice Inspection," Revision 1-NP-A, dated February 1999, Table 4.1-1, Examination Category R-A, Risk-Informed Piping Examinations, Item Number R1.11, Elements Subject to Thermal Fatigue, and R1.16, Elements Subject to Intergranular Stress Corrosion Cracking (IGSCC). NRC approved the use of the WCAP for WBN in NRC's safety evaluation for the Risk Informed Inservice Inspection Program dated January 24, 2002 (TAC No. MB 2082).

The examination requirement is defined in ASME Section XI Figure IWB-2500-8(c).

Code Requirements from Which Relief is Requested:

Relief is requested from the examination coverage and qualification demonstration requirements for austenitic piping welds with single side access.

Basis for Relief:

The 10 CFR 50.55a(b) (2) (xv) (A) requires that if access is available, the weld shall be scanned in each of the four directions (parallel and perpendicular to the weld) where accessible.

Coverage credit may be taken for single side exams on ferritic piping. However, for austenitic piping, a procedure must be qualified with flaws on the inaccessible side of the weld. There are currently no qualified single side examination procedures for austenitic piping welds. Current technology is not capable of reliably detecting or sizing flaws on the far side of an austenitic weld for configurations common to United States nuclear applications. The Performance Demonstration Initiative (PDI) Program conforms to 10 CFR 50.55a(b) (2) (xv) (A) regarding single side access for piping.

PDI Performance Demonstration Qualification Summary (PDQS) personnel certificates for austenitic piping list the limitation that single side examination is E1-2

ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 performed on a best effort basis. The best effort qualification is provided in place of a complete single side qualification to demonstrate that the examiners' qualification and the subsequent weld examination is based on application of the best available technology.

When the examination area is limited to one side of an austenitic weld, examination coverage does not comply with 10 CFR 50.55a(b)(2)(xvi)(B) and full coverage credit may not be claimed.

The design configuration and materials used in fabrication of the subject SIS weld precludes an ultrasonic examination of the required volume because there are no current qualified single side examination procedures that demonstrate equivalency to two-sided examination procedures on austenitic piping. The design configuration and material limits ultrasonic examination to the extent indicated:

ASME Section XI Best Effort Coverage Weld Coverage (Note 1)

SIF-D092-15 50 percent 100 percent Note 1 - Coverage does not consider the inherent limitations associated with the PDI for one side access Alternative Examinations:

In lieu of the code required examination coverage and qualification demonstration requirements, a best effort ultrasonic examination was performed, as qualified through the PDI for Supplement 2 to Appendix VIII with demonstrated best effort for single side examination.

The ultrasonic examination resulted in no recorded indications. Refer to attached examination data report.

Justification for the Granting of Relief:

The best available techniques, as qualified through the PDI for Supplement 2 with demonstrated best effort for single side examination, were used from the accessible side of the weld.

E1-3

ENCLOSURE 1 TENNESSEE: VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 (1) The design configuration and materials used in the fabrication of the subject piping welds precludes ultrasonic examination of essentially 100 percent of the required examination volume.

In order to examine the welds in accordance with the code requirements, the Safety Injection system would require extensive modification.

The design configuration and materials used limits the best effort ultrasonic examination to approximately 50 percent for tee to elbow weld, SIF-D092-15.

The subject weld was examined using application of the best available ultrasonic technology currently qualified.

(2) Radiographic examination as an alternate volumetric examination method was determined to be impractical due the material thickness variation and the Risk Informed ISI Program (RI-ISI) requiring an extended coverage (weld plus h-inch of base material from the transition point). The radiographic density variation does not lend for compliance with ASME Section V requirements without extensive radiographic exposures to obtain the density for the base material on the fitting side. The additional radiography required would increase personnel radiation exposure.

(3) A Risk Informed approach provided by WCAP-14572, Revision 1-NP-A in combination with examinations performed on similar items, provides reasonable assurance that significant degradation, if present, would have been detected.

Performance of an ultrasonic volumetric examination of essentially 100 percent of the required volume of pressure retaining circumferential weld, SIF-D092-15, would be impractical. As previously discussed, TVA determined that it would be impractical to attempt other volumetric examinations in order to increase examination coverage. The maximum E1-4

ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-16 extent practical ultrasonic examination of the subject welds provides reasonable assurance of an acceptable level of quality and safety.

Significant degradation, if present, would have been detected during the best effort ultrasonic examination that was performed on the subject welds. As a result, reasonable assurance of operational readiness has been provided.

Therefore pursuant to 10CFR 50.55a(g)(5)(iii), it is requested that relief 'be granted, for the first inspection interval.

Implementation Schedule:

This Request for Relief is applicable to WBN's first inspection interval. The interval began May 27, 1996 and ends December 26, 2006.

El-5

ENCLOSURE 1 WATTS BAR. NUCLEAR PLANT AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10 YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR. RELIEF 1-ISI-16 ATTACHMENTS Weld Location ISI drawing CHM-2758-C-10 Examination Data Report R0960 EIA-1

- ' fI L-D UYI,.a More- KtP~T~tfN" UrTMJIV~--

1. rHE FIrrNG BETWEEN WELAS s5 4J35* Si5. a IMS A LOIIGIUDINAL Wil.

ir-,P-r, MATERIAL spECIric~rioNs LS' CM. 250 5ULS 54 375 7W 321

-"" T '-f*- tic 11'V "C~I'll5VL5s 5 J7;l rP 313 srr<-ro-Tf6-14 r--T 21 Scm. y SOULSSA 378 TP a04 irr Ees O L (D

FAN ROOM #1 At)MPlAM_ .__ ra I - I.. I .1.

S sr-B-ToU-13 ASME CC-1 ' EcURALEmr)

(nW

<, o~t na2/./, 0 feuTT 'ELP) A'(A...

AtXGfI70 FLAME crOR O- 5J Sr -o7 - 7 -

rfti H < Z H U

-roo-DoD-OOE ft r O

$-IPT00 I-02E-OS - r -D 2-3 ROO/W #4 0 rt l-t srrr-0¢51

. cn t vrr-B-rO2. . p15-EL. s1- O .0 ir-s 5-07 t /-05 SIF-P S Si-A-TO5t-0S

. . \r-DDr-e-rr. o SK ri

-Ijj

' /1fSIF-DOa-0 IQlN TE0 7 -

T- - ~ gOAL ryu rrg,,

rnf ww "Ism rN.r (D

s mafa .1VA AC 5VWrM 2rL 4_lz S -t2 p\< LL+/-4P

^ .j.J"5IS-2J4 .l Am Il t- rW Me\e-, L INA _ r F-A I IsIJ,.06*1.i-r 5)

_EE __ __,

_ALE _IT_,

17ElSEEF VALLEYArUrNlTY t1 A t - N *A s A A.1 P A A AS a .,r A WAr I i Zi 6AR SAFE?? JrWOLD LCA IONS ,LAM~

iYVCLtEA" INJECIrOINM3 S SAFE - lit 05*w 1

tr

. marrar C d- 2 7 5stm8- C- O~ Il rrrrtl CtfM-27553-C- ?O 17

Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Attachments TENNlCSSEE VALLEY9 EXINATION SDRl l REEORTNtTfdBER:

TENESSE VUT"Y I AND AUTrHOlTY IRESOLUTION SHEET 06)

PROJECT: WRI UNIT: I CYCLE e6 COMPONENT 1D: SW-D092-15

_ BXAMNATION NMHOI) wYM: SS II)DWGNO: CMd4758-C40 MT 0 1 PT a UT Er VT O CONFIGURATION: nATEGORl PROCEDURlN-UT-64 REV 77 [ 1IA PXEL TO ?CPIPZ IO "

.XAMNMR: EXCAMMER FX&WUNER A m. :

SASDO PbLoSa *), 1 _ _____

LEVEL. = LEVEL: LMVEL LtVEL:l Totsctoveragecaculakate0tob aDDroxIimttel /OQ ff 6 T/I OA.vo Arp.,ji- .,

w mrb I iS SrA'xiS SrerL.

4S' ELtaOw To TZ45-. Elb.

TUIS YrM S PJrSLE CAA/U*Effli Aks-snehiL 37s-,-. 2,25Smmz. AAJHA f01ZL 2(sxvv.-) 2mm1Z _

WIU?". C,4L IRP-7' *AJ ins AI1T C.AL A aL, O.'

2J 01r A'O gai2 Dwo itibnJcAIls cj XS___ _ ziii RXS LTTIO; BIY: ALVIZ'.VED BY: NI

______ DAME:JAk LEVEL DATE: 3/1IpS LEVELt t010$

  • DT: Pag~e: . OF--5 AWMcCPO" R DOATARASER.1WsI E1A-3

Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Attachments DIGITAL ULTRASONIC REPORT NUMBER AUTEORITY V CALIBRATION ATOIYDATA 3HERTI PROJECT E Zt e CALMBATOrD TE: I N-rr-6 PROCDUI~~ REV.2 T~ ~ CALIBRfATION BLOCK NOJ &ArUii* 0

  • TRANSDUCER - SWLTO L XANUFACTURER S/?aA ____:St27__1 UDkTEC-_-_

DIODELL Co$AP G SIN Fo J7 2 / COUPLANT: D*eLA E BATCEnL9o2:-eS

-ANGLE VERjflCATIO __

SIZE: 3 FFJQ: Z. 2SV binz RLOCKTYPEPA+/-s SN: w2-7>D SHAPE: e.b

  • zLENENTl: I #CONS: NONAL ANGLE: YS ACUALKN CAELETV jZI/4- I/ LENGT HLL-- -- INMNT MODE: OLONG C1RL MA-JTlFcr k7 DhI bATIC-4f05 DAC MODELNO.: VStS2L s:a E3OZZ6'

.NSTAUr4XNT SEIrfNGS

_ T 100

=1 IA REFLECOR BCADXRECL NTC SP s NWOMEOR

__ AXALJ I U dE 8

_ - _ P _cxi~c -IO o tdEa

_ -0 - L MHz M1REQ./ RmJEc!- e M.

_I ANGLE- Y7 deg DAbVMCG: I t'D0 ohm 40 _ - T DELAY0- nuee mse PULSPR- SiNo-tt /*

_11 _ _ ___U ZERO, S. bo_ mse/

_____ D vxLOCr-.I1-25S mitt PRRJPRg_6

_ RANGE: 1.2-700 ithes TOr.. Peof 0 _ _ _ISP.MODL FUL WA4V POWER: sAr 4

yp~g 2 V7 nohes /H-I JI 1 /_nOU 0SLAWI-E2 RF.REFLZCTOR PfAhS GALS:5 dB CALIB'IUION TIMSE

Arfrrrrmr.fi

.. VVDi 5  % .9 S ALPAT, f .- I >=L<<L-TIME-& riy ., - .*A -_E VRIUC.

ONl Ml ZI)1,42r4)A 6 vl.#

z 7)^t.4 18)p-- 4" p) 1-Fl)~A EDI QUAF1IED INSTRtUVT S2TrGS:

Vl:RYLVS=V&LrCSgrNGS A" CALIEATION SEQUENCE An RfACCORDANCE WITATBLE 2 OF ThE APPLICABLE PDI QUALJFICATION WLEMINTATION PROCEDUJRE!

E1A-4

Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Attachments TENNESSEE VALLEY DIGITAULULTRASONC lREPORT NUMBER AUTHOITY CALIRATION -

DATA SHEET I 0L PROJECT _w CALIBXAlION DAT4, 1 r o -

UN/MCYCLE 1/O$5 CALMRATIONDLOCKNOW&83 TEMP- 70 F PROIEDM: &-V-U RVMV ? TC:_jA Th4MaUCZ1 - 4 SWULATOR BLCK: 7t t7? '

MANUFACrUPR & Tb THERM0METER S/N:5 7/ M) DAM L 9 -O° MODEL: riLA V SIN qqj1 COU1A:VI-WA2 - BATC:r ZL ANGLE VRfMCATFO; SIZ: jcta d"-. 7e FR 2. z BLOCK TYPE.IVALL aw: 77 t 7?o SEz.P:fteCr # LEMETt.. I fCONS: f_ NOINALANGLE: 60 " ACMTALAVNGLE: _C CABUL TYPEi.) f 7Y' LZG A - 1NSThLRVTU -

MODNE: s MEAR OLONG RL MANUFACTRER k eA DuE DAZE:4 '-4s MODEL NO.: USA 52 L S,.: E O 2 DAC -NSmML'NS SiElTIKGS 100 R=ELEcroR RREFcO so I )I 11IL~ A SCaD1RECr. rjTC SDH amSITLvZTy 11101Y NvbnDrR AMAL h( LB 7 CIRC. dB to L FR 7 # -,MHzV REJZCT:- F %

I II AJNGLE- .deg $ DAMIPKG: *0o shins-40 I IX 'r 17 DELAY: O. o_be ZERO: 8.^e, mzste xnsec PtJLSERFL L6

  • 20 VELOCrrYL._2 2 / PRiRs: f IC-//
  • g RANGE: 35 500 inches TOF: Pzk 0 DISP..N10DF.aFL W-AV POWIR:- 3 i -

DITSPLAv wirD1t 3*5°° REJ. RlFLECTOR. NMF 5b Aj AMP1lTUMD. 7 S f. MEXTAL PAYT

_ ilF-M.92- 3 EXUR: LVL~ An D /.

EX IR., v _4LVL- DAI1: V s REUWER.: LvL:.M:7DATF:5 5 l1AGE 3 0r $ _

te psa r.:hnC s. -r

  • 41._

ElA-5

Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Attachments TENNESSEEVALEY MANUAL ULTRASONIC REPORTNUMBER

. AUTHORITY PIPIGE~XAMINATION .. f DArA HEET PROJXCr: WBN UNnrJycLE 11 EXAMrNATION DATE-

'f 3 / /l oS SYSTLM: Si SrART wIziE ° 3- - END Thvl*n WELDLD.: SIP-DO92-15 _ M SUSJACE OM: I9OD CONF1G.: 1F JO ?TERMLTYPE: OCS 3SS QCSCL occss FLOW SXD3WACETEBIP.: 61 PYRO NO. 27,3 VROCDURX: &U~r44 REV; 7 TC: 1_ fjO? NG 45 DEG 6 0 DIG WoRREFEMNCE: vN6'tb cEvap,'i, ^ _C SCAXSXNWSTV IT 31 dJ CZ dB 14 RITMNCA: bV eP L eA, _CRCScAKsEsIvny 1 3t dlj 9A MI INI LOPFRoMREF. AT MAXAP MAX EM NOM NDATION INFOIRMATION:

No Li L L2 W MX MPMAX MAX  % DAC 3 ANO. TYPE DAMP1NOETC.

_ _ __ 45 m S14.i4 b,. usf?.-

'W & t' ss4 MXJ'-rp. c..JA l.~w UEMARKTUTATIONS

_____C,-LAu a 3" Jp scb, A- prjr ba- r To AJOCSe.

mA*+,pjEh to .p l#

1,b /LL I tJI r I .- - . -,

LEVEL: AN1: y.

XMINERV A LEYEL: DATE-LI!DE L: ;Z- DATEh:3,D PAGE ---AOF F ACES; FORMS OA ElA-6

Enclosure 1 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Attachments TVA ~~WALL THICKNESS RPTNO PROFILE SHEET N. PROJECT: WBAJ WELD NO: SI Fb9ZS UNIT: I ____SYSTEM:__ __ ___ __ __

Reomrd Thickness Measuements As Wl edRS Indicaetd. Inc vdino Weld Width. Cnoln ItdlgaoY dgel At r'1d 2.1 I-ir11 ir S Id -

~ Al L l.Od CROWN HIGHJOT. Fl-uS.i - DIAmITER -

CROWfr WOTH: J -WELD LENQTH:

-FLOW N

3XMIND C REVIEWED SY-A F e4ANt bT9, 31,/loS LEVEL% ,~ PCF-5 wAM"M$%.SI  ;-IU-il.44 ElA-7

ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR. RELIEF 1-ISI-17 Summary:

Due to design configuration of the reactor vessel, volumetric examination of the bottom head to lower shell circumferential weld and bottom head cap t:o bottom head spherical ring circumferential weld during the Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved. The design configuration of the core barrel support lugs and lower head penetrations interferes with performance of an ultrasonic scan of these circumferential welds, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of these components is required in accordance with ASME Section XI, Table IWB-2500-1, Examination Category B-A, Item Numbers Bl.ll and B1.21. The full volume weld examination requirement is illustrated by ASME Section XI Figures IWB-2500-1 and IWBI-2500-3.

An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the welds. The design configuration limits the best effort ultrasonic examination to approximately 72 percent of the required volume of the bottom head to lower shell Circumferential Weld, W02--03, and 60 percent of the required volume of the bottom head cap to bottom head spherical ring Circumferential Weld, W01--02. The volumetric examinations resulted in no recordable indications for both of the welds.

The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the circumferential welds.

In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requirement due to physical restrictions. Relief is requested from these examinations because the code requirement is impractical to implement.

E2-1

ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 System/Component(s) for Which Relief is Requested:

- Bottom Shell to Lower Head Circumferential Weld, W02-03.

- Bottom Head Spherical Ring to Bottom Cap Circumferential Weld, W01-02.

Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.

Code Requirement:

WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-A, Item Numbers B1.ll, Reactor Vessel Circumferential Shell Weld, volumetric examination requirement as defined by Figure IWB-2500-1 and B1.21, Reactor Vessel Circumferential Head Weld, volumetric examination requirement as defined by Figure IWB-2500-3.

Code Requirements from Which Relief is Requested:

Relief is requested from the volumetric examination coverage of essentially 100 percent of one reactor vessel circumferential shell weld (W02-03) and one circumferential head weld (W01-02).

Basis for Relief:

The design configuration of the reactor vessel precludes a complete volumetric examination of the required volume for Circumferential Shell WeVL, W02-03, and Circumferential Head Weld, W01-02. The limitation is due to the core barrel support lugs and the lower head penetrations. The configuration limits the volumetric examination to 72 percent and 60 percent of the required volume. Refer to Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.

Alternative Examinations:

In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations associated with the two circumferential E2-2

ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 welds. Refer to Enclosure 2 Attachments for the examination data reports.

Justification for the Granting of Relief:

The design configuration cf the reactor vessel precludes ultrasonic examination of essentially 100 percent of the bottom head to lower shell Circumferential Weld, W02-03 and bottom head cap to bottom head spherical ring Circumferential Weld, W01-02. The circumferential weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT data recording/analysis systems. The target scope of the examinations included 100 percent of the accessible weld.

The examination coverage requirements for these circumferential welds are discussed in Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant.

Examination of the bottom head to lower shell Circumferential Weld, W02-03, is obstructed by the core barrel stabilizing lugs. The design configuration allows for ultrasonic examination of approximately 72 percent of the required volume. The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume E-F-G-H is depicted on ASME Section XI Figure IWB-2500-

1. A total of six core support lugs are welded to the reactor vessel inside surface and are equally spaced circumferentially adjacent to Weld W02-03 (reference ISI drawing ISI-0427-C-06 in Enclosure 6). Each core support lug attachment is approximately 12.80 inches in width and 23.30 inches in length. Due to location of the support lugs in relation to Weld W02-03, the lugs limits two direction parallel and transverse coverage from the lug side of the circumferential weld. The support lugs restrict the ultrasonic search unit scan surface where attached to the vessel.

Examination of the bottom head cap to bottom head spherical ring Circumferential Weld, W01-02, is obstructed by the bottom head penetrations. The design configuration allows for ultrasonic examination of approximately 60 percent of the required volume. The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, E2-3

ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEA R PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-17 with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume A-B-C-D is depicted on ASME Section XI Figure IWB-2500-3. A total of fifty-eight instrumentation tubes penetrate the bottom head. The bottom head penetration limits two direction parallel and transverse coverage of the circumferential weld. The penetrations restrict the ultrasonic search unit scan surface where the instrumentation tubes are near Weld W01-02.

In order to examine the circumferential welds in accordance with the code requirement, the reactor vessel would require extensive modification. This modification would be impractical to implement. Other examination techniques were also determined to be impractical for this configuration.

Reactor Vessel Circumferential Welds, W02-03 and W01-02, received limited two-directional parallel and two-directional transverse coverage. The results of these examinations recorded no reportable indications in Welds W02-03 and W01-02.

The best effort ultrasonic examination provides reasonable assurance of an acceptable! level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the circumferential welds.

Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10 CFR 50.55a(g) (5) (iii).

Implementation Schedule:

This request for relief is applicable to WBN's first inspection interval which began May 27, 1996 and ends December 26, 2006.

E2-4

ENCLOSURE 2 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INTERVAL INSERVICE INSPECTION PROGRAM REQUEST FOR RELIEF 1-ISI-17 ATTACHMENTS

1. Examination Data Reports for Weld W01-02 Pg E2A-2
2. Examination Data Reports for Weld W02-03 Pg E2A-26 E2A-1

ISwT Examination Summary Record Paoject No, 368 Watts Bar Nuclear Plant Unit I suflmmary Sheet No.:

300028 Examination Area: Reactor Presswe Vessel LlnelAssembly: Circumferential Weld WOI-02 Identification: 0 Botlom Head Cap to Botlom Head Spherical Ring T NOE Procedure Exam N

R ti E Resolution CNF Method Rev.Chn.CN NHumberlts Exam Anal I R- Analyst Record No. Remrurs h-AUT ISwT-PDI-AUTINO 1-4 AUTO -

ICN 2 AUTOfor thictkness rreasuiemenm only.

1,2 AUTSLIC40 X VM Exactiraion limired due lo lower head penetrations,

  • ,2 AVTSS X - VI 3.4 AUT SLJC40rT X - vM 3.4 AUT55T X - vM i*

0 I~j Prepared By: / lP l d y12-Mar-05 Ig* Summary It OF 4 130028 No:

/

d IHSO

_I 1WESTI TEC,,HINOLOG IES LI AUTONMAED ULTRASONIC EXANINATION RECORD Site/Plant: Watts Bar Weld tdentilicalioo: RPV-WOI-02 Fro/Rey1CltjiA'H: IStvT-PDI-AUII O/L&2 Exmiato No. I Frojeet No.: 04-036S )Wedd De~eription: t Device Coan llgersili : WAr-WALCON- 0001 Mud.Cenf.: 07A IScan Plth Drawijm8: SI'-VU -02 EanamDaltt Euiflnatil:n Time Surfac Tem perature IF Data Acquisition Operator (s) I SNT Level: Alan Schatefr t NIA 09 Mtel Start En Start End 1952 224')788

____________.AiiIIt< .... , .K . ... .

., , 4 , ,,,;- p. . . . - ., ;;;bi*l, 'W ihi....-.-..*... .v............. : ::'v.':.:.:.

Scan Controller Parnaetery tncremeot Axis Piannd_ l Actual Scan Aiis Pintailed Actu:l Poslitnal Parameters onrntoller: PaR Lower Limit 500 [ 493 I.ower Limit 2839 2839 Wain Di ctiin: Dn/L'p Scnn: 9t4o41 PiVtA 1Upper limit 153G6 1 2838 UpperLLmitt 447.1 4474 lIs:msducerSize: 1.1.'0 Increment: Boont Retale Incieot batIVAJ 5.1 DCI C oe of Overhip:

OX_ 10 Mode: Aultonatic Scan 1Conversion Cowais 1uW OCim-ersion, ( ,.uvs I0. IN rmber of Scans: 335 Scan Motion: Dij-divctional tom'ersiou Unils tleUe-e- Cvon'er::iot, 14niu I 'tmieci Head Rotake P-ocik,. O.o Correction: Dcfault IRadius In. 88.19 Radius In. S.I19 jiluiAS (Pivot Point): 324.U5 Module Parameters: 07A CSl Id Calibration Records: F.tsnwilsation Notrs:

Status Angle Direction Scan OfFset Sttp Offset WAT-13 IChpeh fig li nilnli.wi s '"e to the paximij,'; . ihIh lwe.nh., W4 i-M irannei i Un 55 ) -1.4DIii)s

  • 1 35(i) 0801301 ,ishiumiweti'.ioil Iibos 0.

0 0 Channel2 On 55 El) t 1 4Otin) I1350iro 08013112 (liannel3 On StlC40 -j - 1 (_qinL 72(i.pl I 0_01303 _-

Channel 4 On SU.IC 40 2.0tin)

ID3 I.72ir _ _80l.104 0 Examination Remarks: t'j Channel 5 On it. (-I 4 1(.Ljnj) '. L72.n) _ U 0130i5 I.initcd ex:aination due to the proxitiNl orthe lover head Channel 6 Off NIA NWA N/A NI/A -- A iIrnFitstiodI tubes.

i1_

Channel 7 Off N/A N/A N/A N/A N/A Channel 8 01f N/A N/A N/A NIA NIA CD 4 Increment & Scsn Positioms Actual Rveordaile 1idicatmnis Aua1it- Rtsmiht. ad Scan NoI(s) Increment Position Seami PosiLion _cs No N/A Aliatcmhcnt: ..

Start Slop Start - SltOP Chaniel I U Jj U J YCs U NO Sec attachment __________ _ .__= Channel 2 L] E L: FUwIx Cl uii

_ _ _ __ Channel 3 0 E [0 Rrquired:

_ Cltanncl 4 0 M ( O Yes 9 No 0

6ChannelS 0 [3 Archive rs 4elCD'..

Channel 6 0 0 0 IA/B

______ ______ ______Channel 7 0 n. 0 Ar~i;a~s~dp':Cl' l~ _________________________

Anlyst I SNT Lzvel I Date: / /

ISWTFORSI. Urso (aw.. 0"2)

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 1 (Attachment)

Increment Positicn Scan Position Scan No.(s)

Start Stop Start Stop I - 24 498 1743 2839 4474 25 - 57 1800 3470 2839 3277 58 - 86 3579 5092 2839 3085 87 - 108 5144 6280 2839 4474 109 - 136 6335 7790 2839 3211 137 - 180 7845 1.0167 2839 3700 181 - 243 10224 13571 2839 3499 244- 276 13623 15350 2839 3133 277 - 302 15401 16755 2839 4201 303 - 335 16812 18538 2839 3601

_____________ - - -- --- --- r- ____________________

-2 E2A-4

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exari Number 1 Page 1 of I -G Watts Bar Unit 1 Bottom Hd Cap to Spherical iRing Wo1-02 Cursor BOX 1 of 1 Scan Axis 28.50 - 29.43 Inc. AXiS 14.92 - 19.78 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. AXiS 15.81 - 20.67 Scan AXiS 31.42 - 32.35 Channel 1 Feature Analysis Summary Comments.

No Recordable Indications Channels 1, 2, 3, 4, and 5 Channel 2 Module Coordinates Inc. AXiS 15.81 - 20.67 Scan AXiS 25.57 - 26.50 Channel 3 Module Coordinates Inc. Axis 13.65 - 18.50 Scan Axis 31.00 - 31.93 Channel 4 Module Coordinates Inc. AXiS 13.65 - 18.50 Scan Axis 25.95 - 26.92 Channel 5 Module Coordinates Inc. AXis 13.65 - 18.50 Scan Axis 28 .51 - 29.44 I/./ /O HIN Zj9oor E2A-5

1I11 SOUTHWEST TECHNOLOGIES

_ AUTOMATED ULTRASONIC EXAMINATION RECORD SitePllant: Watts liar Weld ldentllication: RPV-W0102 ProiRev/Chz1CN: ISwT-PDI-AUT1/0/0/1&2 Examination No.: 2 Project N.: 04-0368 Weld

Description:

mmCqe BspbRir3-e Device Confilturalioa: WAT-WALCON-0001 Mod.Conf: 07A Scan Path Drawing: SP-WO1-02 Exam Date Exanuinajion Time Surface Temperalure F Data Acquisition Operator (s) I SNT Level: Alan Schaerer I NIA 10 March 2003 Sart End Start End

_ 0025 0410 L-,@.

    • - ** -i;C',,'t..;.S

-d* ' . . ,w

- ; .*'-K,-

Scnn Controller Parameters Increnetl Ails Planned Actual Scan Axis Plansed Actual Positional Parameters Controllbr: laR Lower Lirnit 1S400 18400 LowerLimit 2839 2839 Scam Direction: Dn/Up San liionn Pivot Upper Limit 36598 36598 Upper in b 4474 4474 rimidutr Siz 1.00 litcremenl: Bloom Rutaie Increrent Interval 54 DCI 3 Code % of Overlap: I Mode: Aultomatic Scan Conversion Counts 100 ConversionCounts 100 Number orScans: 33R Scan Mtien: I i-directional Conversion Units Degrees Conversion Units Degrees Correction: 11Std Rotate Pesitow. 0.0(

Default Radius In. 88.19 Radius tn. 88.19 110is (Pivot Point): 324.05 tiodule Parameters: 07A Cal IJ Catlibratlon Records: framinasion Notes:

Status Angle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the Eroximitv of the lower hiead thancI I On 55 (-L - 1.40(in) 1.35(n) 0801301 insrumentation tubes. C-,

Channe 2 on 55 (3) 1.4U)(in)

+ 1.35(in) 0801302 0 Channel 3 On SlOC 40 (.) - 2.00(in) 1.72(in) i 31801303 _ __

Channel_4 On SlM:40 14) us 4 2,00)n) 4 1.72fin) 0801304 Examination Remarks:

Channcl5 On 01 (i 0.00(in) 4 4 1.72(in) 11801305 Channet 6 Limited examination due to the proximity of the lower iend us'.

Off N/A NI/A NA N/A N/A instrumentation tube.

Channel 7 OfT N/A N/A N/A N/A N/A Channel 8 OfT N/A N/A N/A N/A N/A Partial examination.

Incremest & Scan Positlons Actual Recerdable Indicatioos Analyst Remarks Scan No.(5) Incremnent Position Sam lPnsition Yes No N/A Attchment:

c Siat StoP Start Stlp Channel I 0 i) 0 9 Yes LI No See Attachment Channel 2 O U LI Further F.valnqtinn

_ Channel 3 0 W O3 Required:

_Ch_ aonnel4 o Ei LI Yes [3 No

_ Channel5 0 LI ( Archivc Tape/CD No.:

_ _ _ __ Chanel6 0 a 0 lA/B

__ _ Cha nne7 0 1 Analysis Tape/Cl)No -

n Analyst I SNT Levelt Date ' //

I_Channeld 0 NIA IswrfoaMrm IJTSSne'..aSz)

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 2 (attachment)

Increment Position Scan Position Scan No.(s) 1 -4 Start 18403 stop

8562 Start 2839 2839 Stop 340C 4474 4

5 - 16 18617 1.9210 17 - 47 19266 20885 2839 3205 48 - 59 20886 .1478 2839 4474 60 - 80 21534 22615 2839 4000 81 - 105 22668 23909 2839 3109 106 - 166 23963 27202 2839 4474 167 - 187 27259 28340 2839 3673 188 - 194 28390 28714 2839 4474 195 - 204 28772 59251 2839 3373 205 - 215 29312 29851 2839 3274 216 - 218 29902 30010 2839 3184 219 - 227 30067 30501 283P 4474 228 - 244 30555 31416 2839 3106 245 - 256 31467 32063 2839 4474 257 - 276 32121 33147 2839 3574 277 - 3)8 33205 35414 2839 4474 319 - 338 35465 36495 2839 37?2 E2A-7

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief l-ISI-17 Attachments Exam Number 2 Page 1 oftI X Watts Bar Unit 1 Bottom Hd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis 30.78 - 31.71 Inc. Axis 193.92 - 198.78 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 194.80 - 199.66 Scan Axis 33.70 - 34.63 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc - Axis 194.80 - 199.66 Scan Axis 27.85 - 28.78 Channel 3 Module Coordinates Inc. Axis 192.64 - 197.50 Scan Axis 33.2B - 34.21 Channel 4 Module Coordinates Inc. Axis 192.64 - 197.50 Scan Axis 28.27 - 29.20 Channel 5 Module Coordinates Inc. Axis 192.64 - 197.50 Scan Axis 30.79 - 31.72

//./? A4099- Leez - /° W'eC Sta&-

E2A-8

,H1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant: Waits lint Wedd identincatlbn: RI'V.WOI-02 PralRev/ChgfICN: ISwT-PDI.AUTIi/OC`1&2 Examination No.: 2a 1

ProlectNo.: 04-0368 WetdDescripiieon: _mrc akHspz.b(tsr-wl DeviceConfieurateiu WAT-WAiCON-0001 Mod.Conf.: 07A JScan Path Drawing: SPWDI0-02 Exam Date EIxaml ation Time Surface Temperature IF Data Acquisition (Operator (s) I SNT Level: Alan Sthaefer NIA 10 March 2005 Start End Star End Scan Controller Parameters Increment Asis Planned Actual Scan Axis Planned Actual Positional Paramiteer t.ontrollcr. PaR Lower Limit 1_400 _ 36326 Lowerlimit 2839 2839 Ream Direction: DorUp Scan: Room PFiv, Upper Lirht. 3659S 1659 lIpperliitt 4474 3172 rransducer Si7e: 1.00 Increment: Ioon, Rotate Incremcnt Interval 54 DUI 3 Code % orOveap: 10 Modc: Automatic Scan Conversion Counts 100 Conversimn Counts 100 Number of Scans: 338 Scan Motion: Ri-directional C(onversion Units Degrees Conversion Units Degrees Rtcad Rotatt Position: 0.00 eauhlt DCorection Radius IrL 88.19 Radius In. 88.19 tlolst(Pivot Point): 324.05 ModuleParameters: 07A Cal 13 Calibration Records, INxamiati oter:

SlStts Angle Direction Scan Offset Step Offset WAT-13 Wheck for lmitaione duaeto the =FAmRP o! 'he 10%= GE-'

Incuaei i On ij - - 1.40(in) 1.35(n) - 001301 instrumenataion tubes.

Channel2 On _ 55 _ ) 4 1.40(in) 1.35(in) 0801302 '1* W"'M Channel 3 1tn SlIC 40 (-) 2.00)n) 4 1.72(inl) 001303 Channel 4 On SlI t40 (M) 2.00(in) + 1172(i) 0801304 Examination Remarks:

ChannelS Ott o1. (t) i O.0in) 4 L72iQn) I01305 limited examination due ut the pruximity of the lower head Chanune 6 (1T1 N/A N/A N/A NIA NIA instrumcnlatiun tubes.

Channel 7 (oir NtA NIA N/A NIA N/A Channel S OtT NIA N/A NIA NIA N/A Partiatl examination.

Increment & Scan Positions Actual Reser4able Inicatlions _ Anclyst Remarks Scan No (s) Increen Il'osilinn Scan Position Yes No NIA Atagkment:,

Stati Stop Start Stop Channel I 0 l O Ye5 No 333 - 338 36326 3659a 28:39 3772 Channel 2 U Q Eurthr Evaluation _

Channel 3 D 13 0 Required:

_hannel4 LI 0- YeCs[ No

_channels5 U D ) 01 Archive Iape/C') No.: __

_ _ _ Channel 6 U C DI I A/__

Channel 7 El 9 Analysis Tape/cl) No.- I

_ Channel B O 9 E1 NIA Analyst / S1T Level I Date ., / ,- _

SaeTFoRM W..UT5aqK-. GMt)

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-17 Attachments Exam Number 2a Page I of 2 Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis 29.19 - 30.12 Inc. Axis 183.12 - 185.82 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 3.25 - 5.98 Scan Axis 32.11 - 33.04 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 3.25 - 5.98 Scan Axis 26.26 - 27.19 Channel 3 Module Coordinates Inc. AXis - 3.85 Scan Axis 31.69 - 32.62 Channel 4 Module Coordinates Inc. Axis - 3.85 Scan Axis 26.68 - 27.61 Channel 5 Module Coordinates Inc. Axis - 3.85 Scan Axis 29.20 - 30.13 hi teF~vf . -792 /V HPfx Zaooj E2A-10

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant: Watts Bar IW.IdIdentification: RPV-WOI-02 ProlRev/ChgICN: ISwT-PDI-AUT I /0/1&2 ExaminatiDnNo 3 PrejctN.: 04-.036t Weld Deseription: HC..oaHs is Device Configuration: WAT-WALCON-0001 Mod.Conf: 07B ScanPathDriwing: SP-WOI-02 Exam Date Examialion Time SurcTet ertureol Daa Acquisition Operstor (s) / SNT Level: Alan Scheler / NlA 10 March 2005 Start End Start End

__ __ _ _ _ _ _ _ _ _ _ _ _ _ _ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _0456 0813766 Scan Conlroller Parameters Increment Axis Planned l Actual SCan Axi Planned Actual Positional Parameters I-s Controlcr laR lLower Limit 3272 j 3272 Lower LIimit 500 500 lctcam r'ireetion: Cw/(cw Scan: MmunRobtod Uppcr Limit 40Y2 3920 Upper Limit 1S50t0 tS50t) 1ransduccr Size: IWD Increment: rho Ili' Vot Increment Interval 54 DCI 3 Code % ofOverlap: J0 Mode: Antlniatic Scan Conversion Counts 100 Conversion Counts 101 Number of Scans: 16 Scar Mution: Ii-directional Conversion Units Dcgrces Conversion Units Degrees Head Rotate Position: 90.00 Corection: Default Radius In. S8.19 Radius In. 88.19 Hoist (Pivot Point): 324.05 Module Parameters: 07B Cal 13 Calibration Records: lExamination Notes:

Status Annle Direction Scan Offset Sten Offset WAT-13 ICheck tor limitations adue to Ihe aroximitv of the lower head Channel l On 55 (F) + 1.40(in) - 1.35(in) 0801301 instrumenlationtubes. 0 GA Channel 2 cn 55 () 1.40(in) -1.35(in) 0801302 Chanscl 3 On SLI< 40 t 2.00(in) 4 1.72(in) 0801303 rA Channel 4 On SIlIC 40 (-) - 2.00(in) 1.72(in) 0801304 Examination Remarks:

1.4 tw~

Channel5 Onl 01. () 4 0.00(in]) 4 1,72(in) 0801305 limited examinStionductolhe proximity f(lic loWerFhead Channel 6 (it NMA N/A N/A N/A N/A instrumentation tubes.

Channel 7 (11 N/A N/A NIA NA N/A Channel 8 Off N/A N/A N/A N/A N/A Partial Examination Increment & Scan Positions Actual Recordable Indications AnalystRemarks Incremct Position Scan Position Yes No N/A

Attachment:

Scan Nos) Start l Stop Start Stop Channel I El [lO 1 Yes 0 No See attachtnent lhannel 2 C 0 E O Further Evaluation Channel 3 n 0o Required:

Chlannel4 E .' °0 Yes GI No Channel 5 1U 0 El Archive Tape/CD No.:

Channel6 0 0 13 I AtU Channel 7 0 0 Analysis Tapc/CD No.:

It_ ChannelS n 0 ¶ N/A Anlyst I/SNr Level/ Dale: 2 j / /

JSwTrFOaM K. UT so (R.. "42a

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request fir Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 3 1attachment)

Increment Position Scan Position Scan No.(s) 4 Start Stop start Stop I - 4 3269 3433 500 3695 4739 13832 15110 18500 5 - 10 3484 3759 521 1949 3490 3662 4745 6443

__ 7466 13838

_ 15104 18500 11 - 12 3815 3865 500 2021 4742 6482

. _ 7445 10547 11438 12311 13316 13838 15071 18500 13 3918 _ 500 1865 5288 6395 7853 10307 13322 13811 14876 16967 17930 18500

________ X_____._____ -I__________

_________==_______ '____________________ ._____________________

E2A-12

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 3 Page 1 of Watts Bar Unit 1 Bottom Ed Cap to Spherical nRing W01-02 Cursor Box 1 of 1 Scan Axis 9.27 - 10.20 Inc. Axis 26.61 - 31.47 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 34.33 - 39.19 Scan Axis 6.35 - 7.28 Channel 1 Feature Analysis Summary Comments No recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 34.33 - 39.19 Scan Axis 12.20 - 13.13 Channel 3 Module Coordinates Inc. Axis Scan AXiS 6.77 - 7.70 Channel 4 Module Coordinates Inc. Axis Scan Axis 11.78 - 12.71 Channel 5 Module Coordinates Inc. Axis Scan Axis 9.26 - 10.19 MJ{.m /a "IfA ZcOUJ -

I 1111 SOUTHWEST TECHNOLOGIES VT AUTOMATED ULTRASONIC EXAMINATION RECORD Sie/Plant- Watts Bar [weld Idetifieatlion: RPV-WOI-02 Pro/Rev/Chat/CN: 1SwT-PDI-AUT//0/l&2 Examination No.: 3a Project No.- 04-0368 Weld Descrition: *nCBH s gi.Is-1a Device Configuration: WAT-WALCON-001I Mod.Conf.: 07D Sea. Patk Drawing: SP-WO 1-02 Exami Date Eamnintion Time Ter perature IF ccrfe Deta Acquisition tperalor (s)! SNT Level: David R. Kleinjan 11 10 MarcI 2005 Start End Sltrt End 0S14 0830 76 76

. . -?'r'-: .r;.; *.  : <I.-.s% c0.  :  ; *........  : ~ .~?.y< %4........*..9~~ ..... X stiA i .:B^.;i.t 0 r sl-'.

Scan Controller Parameters Increment Axis Planned Actual Sta. Axis Planned Actual Positional Paranmelers Controller PaR Lo.wer Limit 3272 l 3974 Lower Limit 500 500 j Beam Direction: CwtCcw Scan: Doornl Rotate Upper Limit 4082 3974 Upper .iatit 1I500 18500 -Iransducer Size: LOO Incranent: BoornIPivot Increment Interval 54 ml. 3 Code % of Overlap: 10 Mode: Auto rnatic.Scan (Conversion Counts 100 C o1MNvriOl ( Dunts 100 Number of Scans- I1h Scum Motioo: fli-directional CAnversion Units Dcegrees Conversion Units Degrees Ilead Rotate Position- 90.00 (.5.

Correction: Derault Radius In. 8.19 Raius In. 8.19 t oist (Pivot Point): 324.05 Modals Parameters: 0711 Cal 13 Callbralion Records: lEx.ni.Mtcoo Notes:

- C A- Ang Direction Scan Offret Step Oftset WAX- 13 Check for lmirtalinn th-

!0 nvIMRY or!the i head ¢2 Channel I (tn S5 (+N i 1.40lin) - 1.35(in) 0801301 instrumentation lubes.

Cbatrnel2 On 55 A-)

  • 1.40(in) 1.35(in) 08010312 0 Channel 3 On SLIC(40 (1) I 2.)0(in) + 1.12(in) 0801303 iN Channel 4 <On SLIC 40 (- ) - 2.11t(in) + 1.72(in) 1 U304 80 xaimination Remarks:

C.hannel 5 (n 0t. O-) I 0.01(in) 41.721in) 0811305 lmited examination due ItpnxLimonilt of the lowerbead Lhannel 6 Off NrA N/A NMA NJA N/A instrmnted n tubes.

Channel 7 Off NMA N/A NIA NIA NIA Channel S Off NMA N/A NMA N/A N1A _ Porial Lxamination v.1 Increment & Scan Positions Actual Recordable Indications 1 Re rs

_Analyst Scan No.(s) Increnent Position Scan Positimi Yes No NIA Atlachirnit:

Start Stop Start Stop Channel I 19 U - I Yes U No Sec attachument Channel 2 0 91 01 Funher Evaltiation Chuadn 3 0J P LI Required:

Ch__i__4 _ _0 El O O Yes El No l .hued 5 0 0 0E ArcIhei TeDCI) N(o.:

. Chwuni 6 0 0 0 I A/l __A/B hwnd 7 LI - E[ Anatysit apc/Cl . ____

. chaIm Sl 0 (d1 NiA__

AnalystI SNT Level I Date: /J /

J5WT FORSM Ift. VTM;(/0..avai

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-17 Attachments Increment & Scan Positions Actual Examination number 3a (attachment)

Increment Position Scan Position Scan No.(s) .

Start Stop start Stop 14 3974 . 506 184 2999 3554 5273 6347 7859 10316 11489 12149 14975 16973 180;1 18503

= _________ _ _________;__

.1 E2A- 15

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 3a Page 1 of 1s Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WOI-02 Cursor Box 1 of 1 scan Axis 9.27 - 10.20 Inc. Axis 24.99 - 24.99 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 39.72 - 39.72 Scan Axis 6.35 - 7.28 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 39.72 - 39.72 scan Axis 12.20 - 13.13 Channel 3 Module Coordinates Inc. Axis Scan AxiS 6.77 - 7.70 Channel 4 Module Coordinates Inc. Axis Scan Axis 11.78 - 12.71 Channel 5 Module Coordinates Inc. Axis Scan Axis 9.26 - 10.19 1,AM47:A 2 I-xvi.d. zz, /0 $A4 koVJ-E2A-16

IHI SOUTHWEST TECHNOLOGIES 9;BV AUTOMATED ULTRASONIC EXAMINATION RECORDI Site/lamnt: Wntts par IWeld Identifleation: RPV-WOI1-02 Pro1Rev1ChgfICN: ISwT-PDI-AUTI/0A/01&2 E Project No.: 04-0368 Weld Descriptica: vmc o s tss-s Device Confieuration: WAT-WALCON-000l ______________No_3b Mod.Conr.: 07B1 Scan Path Drawing: SP-WIOI -02 Esam Date Exan.in.ti, Time Surface Te arnerea F Data Acquisition Operator (s) t SNT Level: David R. Kteiaian I llII Mardi 2005 St3rt End 0strt End 0832 t0oei 76 1 76 Scnn Controller Parameters Increment Axi Planned Actual Scan Axis Planned i-i Actual Psaitional Parameters Controller: PaR I.ower Limit 3272 4028 LowerLimit 50D Soo Beam Direction: Cw/Ccw Scan: Boom Rtlate Upper Limit 4082 j 4082 Uppc limit IS5t0 18500 Transducer SIze: 1.00 Increment: Booom Pivr lIncrement Interval 5-4 IX.1 J Cdc;.ofOverlap: tO Mode AulomaticScan Conversion Counts 100 Conversion Counts lOr Number of cans: 16 Scan Motion: Hi-directional Convcrsion Units kgrmcl Conversion Units Degrees [ed Rdtte Position Cs . w Correction: 90.00 Default Radius In. t8.19 Radies in. S8.19 loist (PivotPoint) 324.05 Module Paramelters: 07 Cal 13 Calibration Records: lEsanination Notes: .

C) 0 Z Sastus Angle Direction C)

Sean Offset Step Offset WA'I-t3I Chbck Mr limlatin HeI to the nr, Mit0! !the i hehe' Channel I On 55 M-

5) 4 1.40(in) 1.35(in) 0801301 instrtuentalion tubes. C)

Channel2 On 55 (-) - 1.40(in) - I.35tin 0801302 0

(.Channel 3 On SlIC4D +) + 2.00(in)

Chattel 4 (t SIAIC40 (.1 - 2.00(in)

+ 1.72(in)

+ 1.72(in) 080(1)03 = en 001304 Fsamination Remarks:

Channel 5 OIl OL (-t) I 0.0(Win) + 1.72(in) (l801305 It-)

Limited exmnination due to the proxlmity of the lower lad 02 Channel 6 0IT N/A N/A N/A N/A NtA instrumentation tubes.

ChannnC 7 O(F, NIA NIA NMA NIA N/A Oannell oIT NIA N/A N/A NIA N/A

-s.;'-i_  ;._. .. .

  • '.7' ai  :  : .--

()c I-i Increment & Scotn Positions Actual 02 Recordable Indications Analyst Rernarks S No.s) IncremenI Position Scan Position Yes ND NIA Attachunenl:

Start StO" Start SO Channel I U l 3 1 Yes 0 No r;j See attachmnt Channcl 2 0 91 (j Further Evoluatiot Chnnel 3 0 hi] Itequiled: t1

_ Channel4 U] r [J O Yes Q No

_Channel 5 0 (3 Ardiivc i Tnpc CL) No.: _ _ __ _

lCbannrl 6 U 0 L I ____

_Channel 7 U Cl 0 Analysis Tnpv.1) No.: __

_ Channel 8 LI] N/__

Analyst / SNT Level / Date, , 2o'>

1Swir owatnM. UTrso ". WAZI

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 3b (attachment)

Increment Position Scan Position Scan No.(s) .

Start Stop stat Stop 15 4026 - 500 1889 2948 3668 5420 6398 7454 8792 9860 10397 11429 12155

. 14957 16964 18320 18500 4 4 4 .- 4----------.

4. 4 4 *
4. + +

_ __ __ _ _ _ _ _ _ _ _ _ _ _ _ __I I.I ___ = - -

E2A-18

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief l-ISI-17 Attachments Exam Number 3b Page I of 13 Watts Bar Unit 1 Bottom Rd Cap to Spherical Ring WO1-02 Cursor Box 1 of 1 Scan Axis 9.27 - 10.20 Inc. Axis 24.99 - 24.99 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. AxiS 40.26 - 40.26 Scan Axis 6.35 - 7.28 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 40.26 - 40.26 Scan Axis 12.20 - 13.13 Channel 3 Module Coordinates Inc. Axis Scan Axis 6.77 - 7.70 Channel 4 Module coordinates Inc. Axis Scan Axis 11.78 - 12.71 Channel 5 Module Coordinates Inc. Axis Scan Axis 9.26 - 10.19 I/,;~

Z"F-zzz to f4#w 2,0Oj-E2A-19

IH1 SOUTHWEST TECHNOLOGIES dbAUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant Watts Bar iWeldidentifieatlooe RPV-WOI-02 Pro/Rev/ChvAC1N: ISwT-P[2l-AUIl/W0I/l&2 zxamination No.: 4 Pr!ejet No.: 04-0361t lWeldDescription; ~ s ,(ras DeviceConfigurastion- WAT-WALCON4-001 Mod.CenI.: 0711 IScan Path Drawin SP-WOI-02 Exam Date Examaination rime Surface Teaperature IF Data Acquisition Operator (3) /SNT Level: David R. Kleinjan Il 10 March 2005 Sbart End Start End

. 0915 1024 76 76 Scan Controller raramrters Increment Axis Planned Actual Scan Asia Planned Actual Positional Parameters Controller: PaR Lower Limit 3272 1 3272 LoweLimit 1J400 18400 Beam Direction: Cw/Ccw Sncn: Boom Rotate UpperLimitl 4082 l 3867 UpperLimit 36601 365o9 d Size:

oransdcr 10' Sncrcnc noorn ivot IncreDentinterval 54 3 DCI 3 (WeIsTrOa Ovcerlap: 10 Mode: Automatlic Scan Conversion Counts 100 Conversion Counts 100 Number of Scans: 16 Scan Motioti: Bi-diteciioal Conversion Units Degres Conversion Units Depees Head Rotate Positior. 9.00 Correction: ierault Radius In. 38.19 Radius In. 8.19 sHoist (Pivot Point): 324.05 a Module Parametert:

Slatus 0T7 Ande Cal 13 Direction Scan Offtr Offtet!

Step on CalibrationReeords:

C.ee A-13 zExaminatlin Notes_

o  :-:s due to tlre fuximiiy oF iie iowr head Ca

~di.0 (1 ,f C nO 55_ ( 4 14in) 1.35in) P001301 insarumertnbon tubes. 0 Channel 2 On 55 - 1.40(in) 135fin) 0801302 -tZ en Channel 3 On SIlC 40 2.00(in) 4 1.72lin) 0801303 Channel4 On SIIC4 (-) 2.00(in) 4 1.72/in) 0801304 Examination Remarks: ,a9 C,,

Channel 5 _tn _ IL !CinL_+ 1.72(in) O031305 imiled txaminalion due to the proximity of tbe lower llead Channel 6 0!! N/A N/A N/A N/A N/A inslnmaentation tubes.

<hannel 7 (IT NMA N/A N/A N/A N/A Ch8anelS Off NM _ N/A N/A NIA N/A rtial l~xominatioa

' ... ,  ; ,' ,' ,s.: tt .~ ... h . **  ; ,  ;, , ;..'-,  ;

Increment & Scan Positions Actual Rneordable Indicftiens Anals t Remarks S No4() I Incrnmcnt Position Ycan l'osition Yes No N/A Attachmnent:

Sntart Stop Start Stop Channcl I [I o 3 E Yes LI No Sec Attachnicdt Channel 2 0 0 Further F Evaluation Channel 3 0 pi 0 Required:

_ Chaane4 03 9 ° O Yes 0 No

_ _ Channel 5 0 9 0- Achivc Tape/CI) No.:

Channel 6 0 0 9I AA]

I Canl 7 0 EL C9I Analysis Tape/) No.:

_ _ _ _ ChannelS O U 9 N/A Analyst I SNT Level I Date: / //

Vr00 / /A. l, 55a uSwr FORM N. UTSO(nt-o"n

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Increment & Scan Positions Actual Examination number 4 (attachment)

Increment Position Scan Position Scan No.(s)

Start Stop Start Stop 1- 7 3269 3593 1840C 22639 23854 28792 29857 30550 31597 36601 8- 11 3652 3811 18400 19339 20386 22636 23866 28852 29884 30526 31693 32672 33115 36601 12 3865 _ 18400 19306 20260 22648 23605 27304 28369 28804 30226 30493 31744 32209 33295 36601 E2A-21

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request far Relief 1-ISI-17 Attachments Exam Number 4 Page I of Watts Bar Unit 1 Bottom Ed Cap to Spherical Ring W01-02 Cursor Box 1 of I Scan Axis 188.27 - 189.20 Inc. Axis 26.07 - 30.93 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 33.77 - 38.66 Scan Axis 185.35 - 186.28 Channel I Feature Analysis Summary Comments No Recordable Indications channels 1, 2. 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 33.77 - 38.66 Scan Axis 191.20 - 192.13 Channel 3 Module Coordinates Inc. Axis Scan Axis 185.77 - 186.70 Channel 4 Module Coordinates Inc. Axis Scan Axis 190.78 - 191.71 Channel S Module Coordinates Inc. Axis Scan Axis 188.26 - 189.19

/i ZFA~ /O He* zaOcj E2A-22

IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant Wells Par [Weld Identification: RPV-WO 1-02 Pr/JRev/ChrslCN: ISwT-PDI-AUTI/0AI/I&2 Examination No.: 4e Pre ectNo.: 04-0368 WelddDescriptlon: aic p 1tsei srysve DeviceConfiguratlon: WAT.WALCON-0001 Mod.Cof. 07B _ Scan Peth Drawins SP-WI1-02 Exam Date Examleation Time Surface TemperatureeF Data Acqulsition Operitor (a)/ SNT Level: David R. Kle nlja ll 10Marc2005 l Start Road Start Ehd 1Mah20 1025 1038 76 76 Seen Controller Parameter, Increment AxIs Planned Actual Scan Axis Planned Actual Positional Parameters Controller PaR Lower Lirit 3272 3974 Lower LIuit 18400 1400 Beam Direction: Cw/Ccw Scan: Hoon Rotate Upper Limit 4082 3867 Upper Limit 36601 35491 Transducer Size: 1.00 Increment: Boom Pivot Increment Interval 54 DCI 3 Code % of Overlap: 10 Mode: Automatic Scan Conversion Counts 100 Conversion Counts 100 Number of Scans: 16 Scan Motion: Bi-directional Conversion Units Degrees Conversion Units Degrees flead Rotate Position: 90.00 Correction: Default Radius In. 3319 Radius hI. SS.19 Hoist (Pivot Point): 324.05 Modnle Parameters: 07B Cal 1.3 Calibration Records: jR.amination Notcs:

Status Amede DIrection Scen Offset Sten Offset WAT-13 lCheck for limitations due to the nroxlmltv of the lower head Channel I On 55 (+) + 1.40(in) - 1.35(in) 0801301 insirurnentation tubes.

Channel 2 (n 55 () 1.40(n) - 1.35(in) 0301302 0 It. us Channel 3 On SLIC 40 (4) 2.00(in) + 1.72(in) 0S01303 Channel 4 On SlIC40 (-) - 2.00(in) + 1.72(in) 0801304 Examinatlon Remarks:

Channel 5 On OL (0) 4000(in) 4 1.72(in) 0801305 imited examination due to the proximity ofthe lower heed Channel 6 Off NIA NA NWA N/A NIA instrumentation tubes.

Channel 7 Off N/A N/A NJA NJA N/A Channel i Off N/A N/A V3A N/A NA Partial Examination Increctnet &~ Been Positions Adtwel Recerdsble Indicetibns Analys Renurix Scan No.(s) L Incremnen t Position SaPosition Yes No NIA

Attachment:

Stop Start Stop Channel I 0El O 13 Yes O3 No See Attadriment Channdl 2 03 0 ElFurther Evaluation

( harnel 30 al Required:

Channel 4[ 0 3 Yes GI No Cmnl5 0 0 E Archive Tape/CD No.

Canl6 03 0 El I AtB Channel 7 0 0 E Analysis Tape/CD No.:

/_ Channe Ijl p l N/A j

Analyst / SNT LevelI Date: -

MawrFORKM ii. Wrrr (R,.03155

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-17 Attachments Increment & Scan Positions Actual Examination number 4a (attachment)

Increment Position Scan Position Scan No.(s)-

Start Stop start Stop 14 3974 18406 19198 520404 22226 2318! 271163

= j _ 31728 32076

-_ - ___ 33109 35500 15 4027 _ l8400 22600 23.1 2?24

31. 8 3207.

33289 35500 16 4079 _ 18400 19213 20608 22582

_ 23878 27220 31552 32014 33244 35500

_. _ _ _ _ _ _ _ _ _ __ _ _ _ _ t_

t _ _ _

=I ....-

E2A-24

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 4a Page 1 of 2 Watts Bar Unit 1 Bottom Ed Cap to Spherical Ring WOI-02 Cursor Box 1 of 1 Scan Axis 188.27 - 189.20 Inc. Axis 24.99 - 26.07 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 39.74 - 40.79 Scan Axis 185.35 - 186.28 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and S.

Channel 2 Module Coordinates Inc. Axis 39.74 - 40.79 Scan Axis 191.20 - 192.13 Channel 3 Module Coordinates Inc. Axis Scan Axis 185.77 - 186.70 Channel 4 Module Coordinates Inc. Axis Scan Axis 190.78 - 191.71 Channel 5 Module Coordinates Inc..Axis Scan Axis 188.26 - 189.19

/V ~9 dzvoJ-bl;,2 E2A-25

ISwT Examination Summary Record rrqet No: I:

36A Sunmay Sheet No.:

. Watts Bar Nuclear Plant Unit 1 1300026 Eamination Aria: Reactor Pressure Vessel Une/Assembir Circumferential Weld W02-03 0 Identifcation: Bottom Head to Lower Shell T N Ht NOE Procedure Dxan FR I Resolution CHF Met Nuwlboets R.vJChoJCN ExCerAil. I  ! Analvt Record NoJ Resflr B.

AUT lSwT-P0I-AUT1JMtO 17-26 AUTO - - AUTOfor thickness measuwreMi only iCN 2 1V-20 AUTSUC40 X . CrM ECxam ion Mriled due to cole barrel support biu 17 20 AUT5S X - CbWM 21-26 AUT SLIC40T X - Co 21-26 AUTSST X - CB tM M.

0 01 repared By:

rD.tO: Pape:

k ISmry No:

g 13-Mar-05 jIorI 1300026 I V A/SZ

,,L IHI SOUTHWEST TECHNOLOCIES AUTOMATED ULTRASONIC EXAMINATION RECORD __

Site/lPbst: Watis iar Weld Identification: RPV-W02-03 prolReviCbg/iCN: lSwT.PDI-AUTIJ//0I &2 Elamintion No.: 17 Project No.: 04-036i Weld Descript ion: BH-to-Lwr Sh (5- I 5) Device Configuration: WAT-WALCON-0001 Mod.Cenf.: 7A Scan Pith Drawlini: SP-W02-03 Exam Date _ Eaaination lime Surface Tern perature°F Da AcquKsonOperator (_) /SNT Level: D1vid iKleinjausll1 10 March 2005 Start End Start End I .1903 .1-.21114 78 78 Scan Coatrler Parameters lucreneat Anis Planned Actual Scam Asia Planned Atual Positional Parameters

(:ontrdler: PaR Lower Limit 500 500 Lower Limit 909 909 Beam Direction: l)nrup Scan: 11om Pivot Upper limit 153S 18534 Upper Limit 1965 1965 Transducer Si=z: 1.00 Incrcment: fluxm Rotate Increment iterval 5t DCI 3 Codc % ofOverlap: 10 Madc: AutumuaicScan Conversion Connts 100 Conversion Counts 100 Number of Scans: 312 Scan Motion: Hi-direclional (Conversiuw Units Degrees Conversion Units Degrees Head Routb Position: 0.00 Correction: Default Radius 8.19 IRadius In. _ itl9 _1Hoist (Pivot Point): N/A Module Parameters: 07A Cal 13 Calibralion Reeords: Examination Notes:

Stains Angle Direction Scan Offset Step Offset WAT-13 Chedc for limitations due to the proximity ofthore t lu and CCD Cho I (n, ss-- 0S.lo, au anssirumcniaiion iubes.

Channel 2 un 55 (+) 51.40(in) 1.35(in) 0801302 0

Channel 3 On SLIC 40 -3 - 2.(in) + 1.72(in) 0801303 Channel 4 On SLIC 40 f+) + 2.00(in) + 1.72(in) 0801304 Examinalbin Remarks:

(3wauncl5 On 01. (4) +0.00(in -- 1.72(in) 0F01305 Limited examination due tothe proximhiyofthecore barrel Chanlind 6 Off N/A NJA NtA N/A NIA anti-rotation lugs.

Channel 7 Off N/A NMA N/A NIA NrA Chanell 8 Off NJA N/N I AIA YIIAlexamination Ui~Q Increment &Sean Positlons Actual Recordale Indications Analyst Remarks Scan No(s) Incrnernt Position Scan Position Yes No N/A Attachmenm: 5:

Start Stop Stat Stop Channell 0 Ol 0 3 Yes l2 No I-IS 500 1497 1410 1965 Channel2 0 ° 0 Further Evalhation 19 - 69 1550 4446 909 1965 Channel 3 0 0 Required:

70 -122 4502 7518 1480 1965 Ctsannel 4 0 E3 U Yes 23 No 123-173 7573 10484 909 1965 Channel5 0 _ 0 (a Archive Tape/CD No.:

174 - 225 It0543 13493 1410 1965 Whannel 6 0 03 (a 3 AIB 226-276 13536 16450 909 1965 Whannel 7 0 0 Analysis 1nrPe(t1) No.: __

277 -312 16508 11534 1480 1965 Channel 0 0 i N/A Analyst SNT Level / Date: . _ A I & t\ ,-, 1 1I\;ca2 16wr FORK Ha UT O l1et. M~lI) l w-

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 17 Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BR to LWR Shell Cursor Box 1 of 1 Scan Axis 12.45 - 13.38 Inc. Axis 17.72 - 22.94 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 18.37 - 23.57 Scan Axis 16.92 - 17.85 Channel 2 Module Coordinates Inc. Axis 18.37 - 23.57 Scan Axis 7.98 - 8.91 Channel 3 Module Coordinates Inc. Axis 16.62 - 21.84 Scan Axis 15.90 - 16.83 Channel 4 Module Coordinates Inc. Axis 16.62 - 21.84 Scan Axis 9.00 - 9.93 Channel 5 Module Coordinates Inc. Axis 16.62 - 21.84 Scan Axis 12.45 - 13.38 Channel 5 Feature Analysis Surmary Comments No recordable indications chs 1, 2, 3, & 4.

II fkar- Zooy dJJ-L E2A-28

I nWrCoEn:

-M-Amazon Site/Pbrolt: Wts Bar Projt Ne.t 04-0361 oSrn o7A tm Doeo i

il IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Wee dentlficateon: RPV-W02-03 scripte BH toU Path Drawtatg: SP-eW203 Lw Sh (55-185) 99 eConeirurate: WAT-WALCON-WOI.

Exam Date 9mination Rut Exantitnaton Time rDevl Ceertre No:

Surree Ten 17s

°F De:s AcqAuisitio O aerator (x) I SNT Cove]: David RoKlunjt I1 10 10 March 2005 Start d Nme S cart Ettd J 2126. 1 .... 2135. 76 5 78 Controller: Pak Lower Limit SW0 1395 3wcrLimit 9D9 909 R~earmDircti;on, LWup

  • can- Boom Pi-Aet Upper Until 1t53t 15242 Upper Limit 1965 1965 Iransluccr Size: 1.00 lucrement: 1ineqmRotate Inrcre^cnt Interval 5t DCI 3 Code ofOverlap: 10 Modc. ALIOntatiCScan Conversion Counts I100 Conversion Cowils 100 Numher orScans: 112 Seaw Motion: Hi-drectiunal Conversion Units Degrees Conversion Units Degrees Had Rotate hsitio 0.00 Correction Default Radius 83.19 Radius In. 89.19 11o0ist (Pivot Point): N/A Module Parameters: O7A Cal 13 CsliirIliaS ierfi EsatnieatnNoes States Angle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the prwximity of the core stor lues and ICiunanci I on 55 l- - 1.40(in) - 1.35(in) 00801301 Ilower head insttrunenlation tubes.

Channel 2 On 55 (V) 1.40(in) - 1.35(n) 001302 0 C<lanel 3 On SLIC 40 (-) - 2.O0tin) + 1.72(in) 0801303 1a.1 Chainnel 4 On SLIC 40 t+ + 2.0(Kin) 172(in) 0801304 EaominallonRemnark:

(iwaiutel 5 on OL (4) + 000(LKn) + 1.72(in) 0801305 ltimited exanination duclo the proximity of the warc barrel Chlannel.6 oil N/A NIA NIAA NIA NA anii-rotatlon lOgs.

Channel 7 Off N/A N/A N/A NIA N/A Channel t Off N/A N/A N/A N/A N/A Partial examination Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No(s) 1Inrenlet t'ositiun Scan Position Yes NO N/A

Attachment:

start Sto Start - Stop ChsannelI 0 I- 0 D Yes 12 No _ _ _ _ _ _ _ _ _ _ _ _ _

I -13 13895 15242 909 1965 Channel 2 0 1 D Funher Evaluation Channel 3 0 0 El Required:

Channel4 0 2 0 D Yes l No 55Channel 0 0 2 Archive Tape/CD) No.: _

_Channel 6 0 0 2 3A JB thannel 7 0 0 E1 Analysis TapetCr) No.:

Ca_ 6 L 0 E NrA M

_el Analyst I SNT Level I Dolie A

.-- ' I I> lS 11 0cl Ro rc1 t5WTr FORMIt.. IJT5 1l.'. 8*1021 \,,  :

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments 3xam Number 17a Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis 12.45 - 13.38 Inc. Axis 14.24 - 19.46 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 148.85 -

Scan Axis 40.23 - 41.16 Channel 2 Module Coordinates Inc. Axis 148.85 -

Scan Axis 344.67 - 345.60 Channel 3 Module Coordinates Inc. Axis 147.11 - 152.38 Scan AxiS 36.96 - 37.89 Channel 4 Module Coordinates Inc. Axis 147.11 - 152.38 Scan AXiS 347.94 - 348.87 Channel S Module Coordinates Inc. Axis 147.11 - 152.38 Scan Axis 12.45 - 13.38 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 41 (Li 1ur 0o I

J-E2A-30

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitetPlast t Watts Ba IWeld Identification: RPV-WD2-03 Pro/Rev/Chn/ICN: ISwT-PDl-AITi/0EO/1l&2 Examinath n Ne iS Project No.: 04-0363 Wel4dDescription: BH-to-LwrShSb 14.366 Device Conrilturaton: WAT-WALCON-0__

Med.ConL: 07A Scan Path Drawin SP-W02-03 Examn Dote Examination Time Surface Tentperature IF Date Acquisition Operator (s)/ SNT Level: Sergey Vinogradov / N/A Alan Schaefer I N/A 10 March 2005 Siatt rod Start End 2142 2352 78 78 Scan Controller PoraMers Increment Axis Planned Actual Scan Ask Planned Actual Positional Parameters -5 c(ntroller: PaR Lower limit 18400 1840O Lower Uimit 909 909 Beam Direction- llip Scan: ioom Pivet Upper Limit 36612 3662 pper limit 1965 1965 Tianaducer Size 1.00 Incrnentit Boom Rotate Increment Interval 5i DCI 3 Code % of Ovcrlap: 10 Mode: Automatic Scan Crnversion Counts 100 Conversion Cntrns 100 Number of Scans: 315 R

.0 0r Z

Scan Motion lli-directiosual Conversion Units Degrees Conversion Units Degrees Itcad Rotate Position: 0.00 C),

Correction: Default Radius 88.19 Radius In. SB.19 Hoist (Pivot Point): N/A -

i.+ a Module Parameters: 07A Cut 13 Calibration Records: IEsaminatlon Notes: o-

0 (C) I States Antle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the proximity of the core stop Ilg and C)

Channcl I (tn 55 (- - 1.40(in) - 1J33in3) uSuiui lower nca instrumnmalion tuows.

Channet 2 0n 55 (+) + 1.40(in) - 135(in) 0801302 C.,

0 Itrhannel 3 On SRC 40 (-' 2.O0(in) + 1.72(in) 0801303 tChannel4 OIn SLIC 40 (tM + 2.00(in) + 1.72(in) 0801304 Examinsation Remarks: to I toj

_Cannecl5_ On 01. (0 + 0.00(in + 1.72(inj) 001305 limited examination due to the proximity ofthe core barrel mannel 6 Off N/A NIA N/A N/A NtA anti-rotation lugs. -i a

Channel 7 off N/A NIA NMA NIA NIA ChannelA r Of N/A NIA N/A NIA N/A = 1~,

Increment

  • Scan Positions Actual Recordable Indications Analyst Remarks Scan Nos) Incremrei Position Scan Position Yes No NIA Attaceuntr N_

start Stop Stan Stop _ _annel I O [a 0 3 Yes E2 No I ISi 18400 1939U 1482 1965 Cannel 2 0 El 0° Further Evaliation 19 - 69 19440 _ 22356 909 1965 Clannel 3 C l 0 Required:

70 122 22403 25419 1432 1965 Clhanne 4 l 0 0 Yes 2Z No 123- 173 25482 28390 909 1965 Channel5 0 0 2t ArchivcTaplCD No.:

274 2 225 23442 31399 1482 1965 lhannel 6 0 0 l2 AtB N 224.226 21447 _ 3435 1 909 1965 ChannelE 7 0 13 AnalysisZlape/(J _No.,__

277 - 315 34410 1 36613 1432 1965 Channel 8 n o3 N/A Analyst I SNT Level I Date: / /

f5wr FOrlMP. U go 4a..s9sa

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 18 Page I of 2 Watts Bar Unit 1 RPV-Wo2-03 BH to LWR HD Shell Cursor Box 1 of 1 Scan Axis 7.10 - 8.03 Inc. Axis 194.72 - 199.94 Depth In Material 2.29 - 2.94 Channel 1 Module coordinates Inc. Axis 195.66 - 200.82 Scan Axis 10.02 - 10.95 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5 Channel 2 Module Coordinates Inc. Axis 195.66 - 200.82 Scan Axis 4.17 - 5.10 Channel 3 Module Coordinates Inc. Axis 193.90 - 199.15 Scan Axis 9.60 - 10.53 Channel 4 Module Coordinates Inc. Axis 193.90 - 199.15 Scan Axis 4.59 - 5.52 Channel 5 Module Coordinates Inc. Axis 193.90 - 199.15 Scan Axis 7.11 - 8.04 E2A-32

IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD itePlant: Welts n. Weld Identificatior RPV-W02-03 ProlRev/iCigICN: ISwT-PDI-AUTM/0/01&2 Examination No.: 19*

reject No.: 04-0368 Weld

Description:

BH-to.Lwr Sh (5-1 5t) Device Coufizxration: WAT-WALUON-0_001 ..

lod.ConI.: 07A Scam Patb Drawing: SP-W02-03 Exam Date Examination Time Surface Tem perture °F

_at_ AcquisitionOperar(s)/SNT Level: SereyVinogradovIN/A AlanSchoefer IA II Start End Staui End 0324 - 0401 . 73 .78 Scan Controller Paramelers Increment Axis Planned Actual Sc m APs Planned Actual Positional Parameters ointroller. PaR Lower Limit 500 1611 Lower Limit 32509 32509 Beam Direction: DrnUp

can
I 11ist Upper Umit 18538 4445 Up limit 34561 34561 Transducer Sizc: 100 ncrement: Boom Rotatc Increment Interval 5S DCI 4 Code  % of Overlap: 10 IW Number of Scans: 312 lodc: Automatic Scan Conversion Counts 100 Con(venionCounts Convession Units btches Head Rolat Position: 0.00 ~ .0 Z~

kcan Motion: 8i-directional Conversion Units Degrees

orrection: Default Radius in. 88.19 Hoist (Pivot Point): NtA Ulodule Parameters: 7iA Cal 03 Calibration Records: lExaninstion Notes: 01 Sbtats Angle Direction Scan Offset Step Offset WAT-03 lCheck for limitations due to the proximity of the core sto I and hatnnel I On 55 (-1 1.40(in) 1.35(in) 0S00301 lower head instrumentation tubes.

2 Onrt0tai Shanncl 55 St Ch 0 1e 0leSW3( No 0 2.31 Chainl + 1.72(in) 0t00303 5r I .J9 (e

Sltanncl 3 Ol SLIC40 320- K2 -0'

2.0 0(in)haannne3ionRRemarirs

Cliancl_4 C~hannel 5 On _

()n SIIC_40 (IL + 0_ C t 1.72_in) ei 1.21inl 0ltC304 0t00305 Noxamination limioed doe to the proximity ofotic cure barre 11  : 02j

_6__ NChannel NA _ NtA N/ N/ D 2 clhitati hn N/A lutN Chan ____tOff NhA N0A _ Nna NT/t _N/A _. a.

-2 Channel S Off NtA NIA N0A N/A NMA Interetnent & Scstt Positions Actnel Recordable Indicateios Analyst Remarkss Scan No (.q) Incremen t Position Scan lPosition Yes No NtS Aitedurieni Da StarAnas St Staert Stop Channel I El Yes F No I - 5U 1611 4449 32509 34561 Channel 2 El El E Furthen Evaluati I Channel 3 0 li 13 Required:

Canl4 a o o3 o Yes E3 Nto Chne 5 3 0 G 1 Arrhire 1Tape/Ll) No.:

7= (hatutel 6 0 03 la 3 AM I IChaltette 7 a c0 (? AnalyqiTrt cl( D Nou:

_C thonnd S a3 o m NIA Analyst I SNT Level I Dvte: AA

.~K.... ,o , .- . IN ISWT FORM N" UT sa (Rt. 01142) 1I

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 19a Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis 329.57 - 330.81 Inc. Axis 17.72 - 22.94 Depth In Material 4.19 - 5.35 Channel 1 Module coordinates Inc. Axis 28.80 - 34.03 Scan Axis 336.97 - 338.21 Channel 2 Module Coordinates Inc. AxiS 28.80 - 34.03 Scan Axis 322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis 27.06 - 32.27 Scan Axis 335.09 - 336.33 Channel 4 Module Coordinates Inc. AxiS 27.06 - 32.27 Scan Axis 324.05 - 325.29 Channel 5 Module Coordinates Inc. AXiS 27.06 - 32.27 Scan AXiS 329.57 - 330.81 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

A

!i IJ K>.KOX~J It' (31AEvr .2-C, 5'

[I E2A-34

I SOUTHWEST TECHNOLOGIES imp AIITOMATFD TILTRASONIC EXAMINATION RECORD Site/Plnt: Watts Bar lWeld Identification: RPV-W02.03 ProlRevfChigICN: tSwT-PDI-AUtL/0/0/1&2 Examibation No.: 19b Project No: 04.036R Weld Descriptiox BH4-tLwr Sh (5-1 85) Device CoflAuration: WAT-WALCON-0001 Mod.Coar.: 07A Sean Path Drawing: SP-W02-03 Exam Date Esamination Time Surface Temperature °F Data Acquisition Operator (s) t SNT Lvel: Sergey Vinogradov l NA Alan Schacer / NtA JI March 2005 Start End Start End 412 0532 *78 78 Scum Coniroller Parameters Increment Axis planned Actual aAxis Plamat Actual Posilional Parameters Controller: PaR Lower Limit 500 757S Lower Limit 32509 32509 Beam Direction: Dn1Up R-s Scan: lnlit UpperUmit IR53R 1030 Upper Limit 34561 34561 TransducerSize: 1.00 Incrementl lbosnn Rotate Increment Interval 5t DCI 4 Code % of Overlap: 10 Mode: Amomrutic Scan Consversion Counts 100 Conversion Counts 100 Number of Scans: 312 Scan Motion, Diidirectional Conversion Units IDgrees Conversion Units Inches Icad Rotate Positicn: 0.00 Corredion. Derault Radius in. 88.9 Hoist (Pivot Point): NA Module Parameters: 07A Cal 03 CallbrationRecords: EmiNation Notes:

Stales Angle Direction Scan Offset Step Offset WAT-03 Check for limitations due to the proximity of the corc stop tags and Channel I On 55 (1) - .4u(in) - i.35(in) 06;i00 b e t-J Chanrtnel 2 On 55 (4)+ 1.40(t) 1.35(in) 0800302 0.

0

> Channel 3 On SI IC 40 2.00(m) t 1.72(in)

+ 0900303 i w tchannel 4 On SLIC 40 ++1

+200(in) + 1.72(in) 0800304 Examination Remarbs: us Channel 5 On 01. (4 + 0.01Kin) + 1.72(in) 0X00305 limited examination due to the proximit of the core barrel tsj us.4 (harvicl 6 Off NMA N/A NIA N/A N/A 3nti-rotatims lugs.

lChannsl 7 Off NIA NIA N/A NIA N/A channld Off NtA NIA N/A NMA NtA increment & Scam Positions Actual Recordable Indications Analyst Remarts Scan No.(s) Increment Position Scan Position Yes No N/A Attaclunent:

Start Stop Stan Stop Channel I f3 0 O Yes (3 No 123 - 1R0 7578 10U30 32509 34561 CLannel 2 Q El 0 Further Evaluation

_ __ Channel 3 Q 2 0 Required:

_ Channel4 0 3 0 O Yes (Z No ____

Clannel 5 0 0 El Arddvc Tape/Ct No.:

__ Channel6 0 0 13 ZA/B

__ Channel 7 n 0 23 Analysis TapCD No.:

Channl S 0 0 la NJA Analyst/ SNT Level / Date:

1 1'LXK ty. -l ' 1!\ 2sb1i 0 MIWTFORM0 4 ft l 0 .(P . 5525

\NJ I

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 19b Page I of 2 Watts Bar Unit 1 RPV-W02-03 SH to LWR Shell Cursor Box 1 of 1 Scan Axis 329.57 - 330.81 Inc. AxiS 17.72 - 22.94 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 89.14 - 94.34 Scan Axis 336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis 89.14 - 94.34 Scan Axis 322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis 87.40 - 92.62 Scan Axis 335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis 87.40 - 92.62 Scan Axis 324.05 - 325.29 Channel 5 Module Coordinates Inc. Axis 87.40 - 92.62 Scan Axis 329.57 - 330.81 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

I O;,Mlr LooU p

A_

E2A-36

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD

,itePlmtt: Waats BaR IWeld Identification: RPV-W02-03 Pro/RevIChiegiCN: lSwvTPDI-AUTJJ101/l&2 Examinatlen No.: 19c

'roject Nt.: 04-036R Weld Descriplion: BH-to-Lwr Sh (5° 15°) Device Confliuration: WAT-WALCON-0001 fod.Conf.: 07A Scan Path Drawint: SP-W02-03 Exam Date Examination Time Surface Temperatusre IF lat Acquisition Operator (s) / SNT Level: Sergey Vinegradov I N/A Alan Schaefer I N/A 11 March 2005 Start End Start End 0535 .0550 . 78 7B Scan Controller Parameters 1ncrement Axis Planned Actual Scan Axis Planned Actual Pesitional Para ers 3onlroller: 'aR Lower iimit 500 13609 Lower Limit 32509 32509 1cam Direction: DnUtp 3can lI ist Jppcr Limit 18538 16800 Uppr limit 34561 34561 TransducerSize 100 ncrement: Flotni Rolatc Increment interval 5 DCI 4 Codc % of Overlap: 10

%4ode: Atitomatic Scars Conversion(ounts IIO ConversionCounts too Number of Scans: 312 3can Motion: Fi-directional Conveizion tIlniLs Derecs Conversion Units Inches Head Rotate Position: 0.00 0 a, o'eection: Default Roius in. B.19 lHoist (Pivot Point): N/A 0 Z Mvrodule Parameters: 07A Cot 03 Calibration Records: jExaminatioe Notes: C Status Antle Direction Scan Offset Step Offset WAT-03 ICheck fior limitations due to the proximity of the core stop lugs and a, Chnnel I On 55 *) - 1.40(in) - 1.35(in) 0800301 lower head instrumentation tubes.

Channl 2 Channel 3 On On 55 SLIC 40 (tl

(.)

+ 1.40(in)

- 2.00(in) 1.35(in) t 1.72(in) 0600302 o000303 WV e0 E 0 Channel 4 On SLIC 40 (t) I 2.00(i) I 1.72(i) 0800304 ERaminalion Remarks:

ChannelS (tn llI. (f) t 0.00(inm) 1.72(in) 08003015 lIimited exanmination due to the proximity of the core barrel Channel 6 Off NtA NiA NIA NIA NJA anti-rocttion lugs.

Channel 7 Off NJA NJA N/A N/A N/A Channel S Off NIA N/A NIA N/A N/A . . . .. .

I5rZ Increment & Scan Pcsllluus Actual Reeordable Indicatione Aunlyst Remarks Increment Position Scan Position ScanNa(s) Start Stop I Start Slop Channel I Yes E3 No 0

N/A 0 Attachment!

0 Yes i29 No 127 182 13609 16804 32509 34561 Channiel 2 0 2 0 Furtha Evaluatkrn Chlannel 3 0 ii O Required: -

_(hnnel 4 0 23 0 O Yes 2a No JChannl 5 0 0 13 Archive Tape/C'D No.:

Channel 6 E 0 2 2 AIB Channel 7 0 0 El Anslysis rape/Cl) No.:

_ __ Coanndel E1 0 la NIA Analyst SNT Level / Date: \ LI 5mawrFOaM me.UTso gao.trsSl)

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI- 17 Attachments Page 1 of 2

.xam Number 19c Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis 329.57 - 330.81 Inc. Axis 17.72 - 22.94 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 149.46 - 154.67 Scan AXiS 336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis 149.46 - 154.67 Scan AxiS 322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis 147.71 - 152.93 Scan Axis 335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis 147.71 - 152.93 Scan Axis 324.05 - 325.29 Channel 5 Module Coordinates Inc. Axis 147.71 - 152.93 Scan Axis 329.57 - 330.81 Channel 5 Feature Analysis Summary Comments No re cordable indications chs 1, 2, 3, & 4 il- I't l ,Af ,oQ,8 E2A-38

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD itelPlaut: Watts Bar Weld Identifaleton: RPV-W02-03 Pro1Rev/Cks/ICN: ISwT-PDI-AUTI/0/0/l &2

'reject No.: 04-0368 Weld Dcsripotio: BH-4O-Lsr Sh (14U.366- Device Conftiurmtion: WAT-WALCON-0M00 EIamIKSIIO No.: 2Dc 2ed.Conf.: 07A Path Drawing: SP-W02-03 aScu Exam Dale Ex minsfion Time Surface Temp rature IF lots AcquIsition Operator(s)/ SNT Level: Sergey Vinogradow I N/A Also Schaefer/ NA 11March 2005 Stil End Start End 0559 0617 7B 78 Seart Controller Parameters Increment Axis Planned Actual Scan Axis Adcul

-lanned Positliaul Parameters PaR Pontroller: Lower Limit 18400 19446 Lower Limit 32509 32509 Beam Direction /Up can: lidst iUpper Limit 36612 22754 Upper Limit 34561 34561 Transducer Sire: 1.011 ncremcent: MItom Rot3ae Increment Interval 5R DI(' 4 Code % of Overlap: 10

-ode: Attomatic Samn Conversion Counts 100 Conversion Counts to0 Number ofScans: 315 can Motion: Hi-directionai CInnversion Units l)egrees Cinversion Units Inches leardRotate Position: 0.00

~ .0 Z:

lorrection: Default Radius In. 38.19 FHoist (Pivot Point): NIA vlodule Parameters: 07A Cal 03 Calibration Records: Elamimation Notes: 4 Status Angle Direction Scso Offsel Step Offset . 0 '- i0 WAT.03 ICheck for limitations due to the roximity ofthecore stop tuR. and I Oninne 55 - ' - I An(;.,% - t3Iis' efI. 1 0; " "!7 0 2hancl 2 On 55 (t 1.40im - 1.35(i) 0t00302 0

"annel3 On Sue 40 (-) - 2.00(in) + 1.72(in) 08w303 E; jP.. r 2hanhel 4 On SlsC40 (1i I 2.0K(in) 4 1.726n) 0S0(l304 Examination Remiarks: t.-

bin 1iaNuscl 5 On 01. ( m) + 0.Wx(1in) I I .72(i) 08003(05 Limited examination due in the proximity of the core barrel

_banncl 6 Olf N/A NIA N/A NIA N/A anti-rfaXtinn lurs.

lIafncl 7 (if' N/A N/A N/A N/A NtA 0 L et uannel t Off NIA N/A N/A N/A . N/A .

Incrmeat &oSeaa Positions Actual l tReordnble Indlcatioas Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No NtA

Attachment:

Start Stop Start Op Channel I 130 ] 0 O Yes la No 19 19446 22755 3250t9 34561 Channel 2 O El 0 Further Evaluation tl__ _cl 3 0 El 0 Required:

Channcl 4 O i ° 03 Yesa No Channel5 03 0 El Archive TapefCL) No.:

Channel6 0 0 13 2 A/B

__annel 7 0 Q GI Analysis Tape/Cl) No.:

_ Chantnel t O 0 3i NIA Antlysl / SNT Level I Daoe , jII Y rck goCJ§ 15111 FORMNP.Us sat5.

F \ ) Eil tirl\ 20A SRFtI l

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request f:r Relief 1-ISI-17 Attachments Exam Number 20a Page l of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR RD Shell Cursor Box I of 1 Scan Axis 329.57 - 330.81 Inc. Axis 196.72 - 201.94 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 207.79 - 213.02 Scan Axis 336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis 207.79 - 213.02 Scan Axis 322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis 206.07 - 211.29 Scan Axis 335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis 206.07 - 211.29 Scan Axis 324.05 - 325.29 Channel 5 Module Coordinates Inc. AXiS 206.07 - 211.29 Scan Axis 329.57 - 330.81 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

,kA B t I- I .I E2A-40

1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD NitelPlmnt: Watts Har _Weld Identification: RPV.W02.03 ProfRev/Ch1CN: lSwT-PDI.AUTI//0/l&2 E ( No 20b Project No.: 04-036S Weld

Description:

BH4o-Lwr Sb (S4.-366 Device Confi nration: WAT-WALCON-001 Mod.Conf: 07A Sean Path Drawin . SP-W02-03 Exam Date Examxina ion Time Surface Temperature cF Data Acquisition Operalor (a)/ SNT LevCI: Sergey Vinogradov/ N/A Alan Schaefer IN/A I March 2005 Stsrt End Stabr End 0621 0636 t 1 Scum Coatroller Parminelers lncrerem t Asis Planned Actual Scoa 'Ai Planned Actual Positloaln Paraeters Controller: PaR Lower Limit 18400 25472 Lower Umit 32509 32509 Beam Direction: Dn/Up Scan: 1t1ist Upper limit 36612 28677 Upper Limit 34561 34561 Transducer Size: 1.00 Increment: wmm Rotate Increment Interval 5o DCI 4 Code % of'Overlap: 10 Mode: Autoinnti Scea Cinversirm Counts 100 Conversion Couais 100 Number oflScans: 315 Scan Motion: Bi-dircctional Conversion Units Dcgrees Conversion Units itches Head Rotale Position! 0.00 Cunection: Default Radius In. 88.19 lloist (Pivot Point): N/A Module Parameters: 07A Cal 03 Calibration Records: Examiastion Notes:

__Sttits _ - Ale 1 Direction Scan Offset Step Offset WAT-03 Check for limitations due to the proxinity of the core St itt and LTI Channel I On 55 ( - 1.40(in) 1.35(in) 0800301 tower head instrumertation tubes.

Channel 2 On 55 + + 1.40fini 135(in) 0100302 0 Channel 3 On SIC40 (- - 2.00(in) + 1.72(in) 0S00303 0, Channicl 4 (In StIUC40 L') + 2.00(in) 1.72(in) 0300304 Exnmiaalion Remarks:

Channel5 On 0.1 () + 0.00(il 1.72(in) 0300305 limited exanihantlon due t( the proximity ofthe core barrel oto Channel 6 (1T N/A N/A NIA NA NIA anti-rotation luIs.

Channel 7 Off NIA N/A NIA N/A NMA 9O4 Channel 1 Off NIA N/A NIA N/A NIA Increment & Scan Positions Actual Recordable Indieatlons Anebtt Remaris Scan No.(S) Increment Position Scan Position Yes No N/A Attaciment:

Stan s Start Stop Channel I 0 1( 0 l Yes 2 No 123- 171 25473 28666 32509 34561 Channel 2 0 E3 0 Funther Evaluation Channel 3 0 El 0 Reqtired:

Clmantel4 0 [a 0 Yes G No

_Charnel 5 0 0 2 A Tape/CD No.:

vchive _

__anncl 6 0 0 [a 2AtB

_Channel 7 0 0 2 Anaysis Tape/CD No.: _.

Channel3 O 0 El N/A AnalystI SNT Level Date. n_ A ton 15WORK us T. a..t-sea2

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Techanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments exam number 20b Page I of 2 Watts Bar Unit 1 RPV-W02-03 BR to LWR HD Shell Cursor Box 1 of 1 Scan Axis 329.57 - 330.81 Inc. Axis 196.72 - 201.94 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 268.13 - 273.30 Scan Axis 336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis 268.13 - 273.30 Scan Axis 322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis 266.37 - 271.60 Scan Axis 335.09 - 336.33 Channel 4 Module Coordinates Inc. AxiS 266.37 - 271.60 Scan Axis 34.05 - 325.29 Channel 5 Module Coordinates Inc. Axis 266.37 - 271.60 Scan Axis 329.57 - 330.81 Channel S Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4 .

,A-it R;- 2rc'S E2A-42

iHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD iltePlant : Watis Bar lWdd Identification: RPV-W02-03 Pra/Rev/Chg/ICN: ISwT-PDI-AUTI1/0/Irlh2 Examinatin No.: 20c

?roject No.: 04-0368 WeldDescriptlo.: BH-to-LwrSh(184'-366' DeviceConriguration: WAT-WALCON-0001 ded.Cona.: 07A IScan Path Drawing: SP-Wt2.03 Exam Date Examinati.a Time Surface Temreratre IF

)ata Acquisition Operator (s)/ SNT Level: Serey Vinogradev / N/A Alt. Schaefer J N/A Il March 2005 Start End Start End 0638 0659 78 78 Scan Centroller Paramleters Increment Ails Platted Actual Scan Ails Plaxned Actoal Positional Parameters eontrolla: PaR Lower Limit 1400 31385 Lower Limit 32509 32509 Beam Direction: DnlUp R.

icanr loist UpperLimit 36612 34590 Upperlifmit 34561 34561 TransducerSize: 1.00 ncremenl: Poom Rotalc Increment Interval 5S DCI 4 CodeofOverlap:

Mtode: AutIomatieScan Convcrsion Countis OO Conversion Counts 100 Number of.Scans:

10 ( 0 -. ~

315 3can Motion: tli-lirctth8ml Cnmvcerion U1its Degrees Conversion Units Inches

  • Iead Route Position: 0.00

.orrection: Default Radius hI. 33.19 Hoist (Pivot Point): . NA Module Parameters: 07A Cal 03 Calibration Records: lEsamination Notes: 1 f4 Status Angle Direction Scan Offset Stop Offset WAT-03 lCheck Eor limitations due to the proximity of te core sto l and

_.hannd I On ;5 - ix4tsin) - i.3in) 0800301 lower heed instrumentation lubes.

channcl 2 On 55 I + 1.40(in) - 1.35(in) 0800302 Lhannel 3 On SLIC 40 -) - 2.00(in) a 1.72(in) 0800303 (12 - 02 02

hannel 4 t Sl.IC 40 (I ) 2.00(in) + 1.72(in) 0800304 Examination Remarks: 54 9 "M-P-

'hannel _ On 01. (I ) 0.00(m8) f 1.72(in) 0800305 Limited exomnination due to the proximity of tie core barrel 0 ~ CD0Q t~.)

Channel6 Off N/A N/A N/A N/A N/A anti-rotation lugs.

Channel 7 Off N/A N/A N/A NIA N/A =-a.

ChannelS Off N/A N/A N/A N/A N/A .

a . -.

Increrneat & Scan Positions Actual Recordable fndications Analyst Remarks Scan No (s) Increment PosItIon Scan Position Yes No N/A Attacdunent:

Start Stop Stan Stop ClIannel I O El ° O Yes E No '4 225 - 2g0 313j8 34583 32509 34561 Chnnel 2 0 El 0 Further Evaluadin MJ Channel 3 O la 0 Required:

___ Channel4 0 l D 03Yes 0 No

. Channel 5 0 0 G Archive Tape/CD No.:

_ *_ _ Chanel O 0 0 2 N__t

_ Channcl 7 0] 0 El( Analysis Tape/CD No.:

.________channEl 0 01 N/A Analyst / SNT Le")I/Date:

' j II' I I_ prcW °° IsW't areoNa UTMs t5.O9esc

\ NZ

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief l-ISI-17 Attachments E;:am Number 20c Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR HD Shell Cursor Box 1 of 1 Scan Axis 329.57 - 330.81 Inc. Axis 196.72 - 201.94 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 327.29 - 332.49 Scan Axis 336.97 - 338.21 Channel 2 Module Coordinates Inc. Axis 327.29 - 332.49 Scan Axi s 322.17 - 323.41 Channel 3 Module Coordinates Inc. Axis 325.52 - 330.76 Scan AXiS 335.09 - 336.33 Channel 4 Module Coordinates Inc. Axis 325.52 - 330.76 Scan Axis 324.05 - 325.29 Channel 5 Module Coordinates Inc. Axis 325.52 - 330.76 Scan Axis 329.57 - 330.81 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2.

3, & 4.

Qxv\ Ck) -KL.&, it I I Nt ,OC.T E2A-44

M RIHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Ote/Plant: Watts Bar Weld Identification: RPV-W02 03 Pro/Rev/ChgICN: ISwT-PDJ-AUT/IOt&2 Eraminetion Ne 21

'ro eet No.: 04-036t Weld

Description:

BH-to-Lwr Sh (5-60) Devie Conflituralion: WAT-WALI2ON-0001 dlod.Conf.: 07B Scan Path Drawlin. SP-W02-03 Exam Date Examination Timne Surface Ter perature IF latt Acquisition Operator (s) / sNT Level: Sergey Viangrado, I N/A Alan Sehaeler t NIA II March 2005 Start End Start End 0019 0050 78. 7S Scam Cuntratter Parameters lIaerement Axis rFaised Actual Scon Axis Planned Adual Poesitional Parameters -i ontroller PaR Lower Urnil. 33395 33395 Lower Limit 500 500 Beam Directien CwlCcw kan: Doom Rotaic U rlimit 34925 34926 U per Limit 6002 6002 Transducer Size:IdIl ncrement: loist lncrement Interval 90 DCI 3 Code % of Overlap: lI vl0dr: Autinmatic Scan Cnverioni(Counts 100 Conversion (Cunts 100 Number of Scans: It

cMnMotion
Di-directiosal Conversion Units Inches Conversion Units lcgrees Head Rotate Positioe 90.00

,orrection: )crault lRadius In. 12.19 l foist (Pivot Point): NA rlodnle Parameters: 078 CAI 33 Status Angle Directie Calibration Recerds: Examination Notes:

e-v (5 0 Z Senn Offset Step Offset WAT-33 ICheck for limitations due to tbe proximity of the core stOp tugs and aarknei I On 55 (4) 4 1.40(in) - 1.35(i) 0503301 lowerhead instrumentation tubes. 0-

-hannel 2 Off 55 (.)1.40(im) 1.35(in) 0503302 0 0

-hannel 3 On SLIC 40 (1) + 2,t0(in) + 1.72(in) 0803303 Os 3hmmel 4 (n Sl K 4t (-I - 2.t0(ini) 1.72(in) 0333304 Examination Remarks:

hanncl 5 On 01. () F 0,O(wn) 1.72(in) 08033t5 Limited examination due to the proximity of the core barrel ZhanulM 6 off N/A NIA N(A NA NA anti-rotation tugs.

hannel 7 (S1 N/A N/A NtA N/A N/A

-hannel 11 01 NIA N/A NIA NtA WA 0QZ Increment & Scan Positions Actual Recordable Indications ______ Analyst Remarks I-tn w -.

Scan No.(s) urernmeli Position Scan Position Yes No NIA

Attachment:

Start Stop Slart I Stop Channel 0I [ 0 OD YCs E1 No 1 -13 33395 34474 1472 4532 Channel2 0 Gl D fUrther Evaluation

14. IS 34565 34926 500 6002 Charnel3 0 la 0 Required: (Ti Chuiunel4 0 a0a 0 Yes 13 No Channel i a 21 Archive Tape/CD No. _

___ Channcl 6 0 0 El 3 AIH

____ et 7 O n El Analysis lapet) No.la Analyst I SNT Level I Date:,

C___ _nel _0 0i 21 NWA t~l \<- tl c4.'ilY\oCC 50 tsWTrFOEHN. ls156 M.. 3t&2) S.

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief l-ISI-17 Attachments _

ixam Number 21 Page I of 2 Watts Bar Unit 1 RPV-Wo2-03 BH to LWR Shell Cursor Box. 1 of 1 Scan Axis 8.36 - 9.29 Inc. Axis 342.87 - 350.97 Depth In Material 6.62 - 7.78 Channel 1 Module Coordinates Inc. Axis 343.85 -

Scan Axis 2.09 - 3.02 Channel 2 Module Coordinates Inc. Axis 343.85 -

Scan Axis 14.63 - 15.56 Channel 3 Module Coordinates Inc. Axis 341.19 - 349.26 Scan Axis 3.80 - 4.73 Channel 4 Module Coordinates Inc. Axis 341.19 - 349.26 Scan Axis 12.92 - 13.85 Channel 5 Module Coordinates Inc. Axis 341.19 - 349.26 Scan Axis 8.36 - 9.29 Channel S Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4'.

Ad C~~~~ -1Trr -4M1 f I' M-r1005 E2A-46

_AMO! 11HI SOUTHWEST TECHNOLOGIES 1ql AUTOMATED ULTRASONIC EXAMINATION RECORD Ite/Plant: Watts Bar IWekd Ideatltflation: RPV-W02403 Pro1RecvCht lCN: ISwT-PDI-AUTI/ lhWI&2 Exanion Ne 22 relect No.: 04-0368 Wetd

Description:

BH-toLwr Sh (59.1200) Devic CoDriuratlon: WAT-WALCON-0001 lod.Conf.t 07B Sea Path Drawin: SP-W02403 Earoo Date Eamlinalion Time Surface Ten erature OF lat. Acquisition Operator (s) I SNT ievel: Alan Schaefer I NA II March 2005 StartI End Start End

-- 006 0116 .78 *. 78 Scan Controller Parameters Increment Axis Plnned l Actul Senn Atis IPitanid Achnl l Positional Parametm ontraller. PaR Limit 31395 9owee Lower Limit 33395 5900 5900 Beam Direction: Cw/Ccw

-can: Boom Rotate Uppcr Limit 34925 34927 Upper limit 12002 12002 Transducer Sim: 1.00 ocrement:

dodc:

Hoist Automatic Scnn Increment Interval Convcrsiam ('otnts 90 100 1C[

onversion Counts 3

100 Code % of Overlap:

Number (If Sams:

10 IF 4n

can Motion
Di-dircclional CQ11vCrsn It to tS Inches Conversion Units Degrees Head Rotate Position: 90.00 9't orrection: eault Radius In. U.19 Hoist (Pivot Point): N/A tlodtle Parameters: 078 Cu 13 Calibration Records: IExasmlaatien Notes: fcoM.

Status AnlNe Direction Sena Offset Step Offset WAT-1 3 JCheck for limitations due to the roximity of the core sto lugs and

hannel I trn 55 (7) 4 1.40(in) - 1.35(iD) 0803301 lower head instrurnentation tubes.

lhannel 2 on 55 (- ) 1.40(in) - 1.35(nm) 0803302 __

lIanncl 3 Oni SIXt 40 (1) 4 2.00(in) + 1.72(in) 0803303 0

-hannel 4 On SIlO 4t0 (-) - 2.00(in) t 1.72(in) 0803304 Examination Remarks: or

.hanntl 5 On 01. t0.00 ) + 8.72(in) 0803305 nimited'exsmination due to the proximity of the core barrel

-hanneJ 6 o6r N(A N/A NfA N/A NiA uiti-rotation lu ianne 27 oIf NA NIA NA NtA N/A

-hannelS Off N/A NIA N/A N/A N/A rn -

Increment & Scan Positions Actual Recordable Indleatons Analysi Remarks S0Q Sca NO(-) Incrcmntc Position St:i l'osition Yes No N/A Atlachrnent:

3St Stop Start Stop Channcelt 0 C 0 O Yes 1S NO I *13 33395 3447- 7469 10832 C hannel 2 0 el ° I:urther Evaluation 14 - 1 34568 34927 5900 12002 Channel 3 0 El 0 Required:

Clanne14 12D 0° Yes E No Channel 5 0 0 la Archive Tape/CD No.:

____Channel 6 0 03 la1 3 AB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

= _ _ Chanoel 7 0 g0 l Analysis Tape/Cl) N.<

_ _liannclS 0 0 2 NA Analyst / SNT Level / Daten I J 2 A SA To mFORKN.

U TsaQSN2) '

t". \ _

-I

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 22 Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of I Scan Axis 62.36 - 63.29 Inc. Axis 342.87 - 350.97 Depth In Material 4.19 - 5.35 channel 1 Module Coordinates Inc. Axis 343.87 -

Scan Axis 57.89 - 58.82 Channel 2 Module Coordinates Inc. Axis 343.87 -

Scan Axis 66.83 - 67.76 Channel 3 Module Coordinates Inc. Axis 341.18 - 349.27 Scan Axis 58.91 - 59.84 Channel 4 Module Coordinates Inc. Axis 341.18 - 349.27 Scan Axis 65.81 - 66.74 Channel 5 Module Coordinates Inc. Axis 341.18 - 349.27 Scan Axis 62.36 - 63.29 Channel 5 Feature Analysis Summary Comments No reecordable indications chs 1, 2, 3, & 4.

-t-'n- HeNJA-l E ~ lik t r2 c u E2A-48

I

[HI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD ite/Plant: Watts Bar Wdd ldeatificstion: RPV-WO2-03 Pre/Rev/CitsgICN: ISwT-PDl-AUIJ'10/0011e&2 Exsnzior ND. 23 rojet Na.: 04-0361 WeldDescriptias: BH-to-LWtSh(lt 1R10')DeviceCorfi tration: WAT-WALCON-0001 fod.Conf.: 0713 Scam Path Drawiac: SP-W02-03 Exam Date Ezamination Time Surface Temperatre OF iat. Acquisitlon Operalor (a)I SNT Level: Alan Schaefer I NIA Il March 2005 Start End Start End 0125 0134 73 78.

Scttn Contrelter Paranmters Incremneat As1a Plmn-od Acdtal oSen Axis Planned Actual Psattional Parameters onlToller: PaR Lower Limit 33395 33395 LowerLimit 11900 11900 Beam Direction: CwfCcw B-i can: Boom Rotale Upperim it 34925 34926 I ppaLiUnit 1002 11002 Transducer Size: 1.00 acresncnt: Itoist Increment Interval 90 DCI 3 Code % of Overlap: 10 4ode: Autostnlic Scan CtAvskion Counts 100 Cerela6 Ona Counts 100 Number of Scans: IS can Motion: Di-directiotnal Conversion Units Inchcs Conversion Units Degrees Head Rotate Position: 90.00 0 Z

.orrection; Deiulth Radius In S l.oist (Pivot Point): N/A I0 I-O. .

dodule Parameters: 07B Cal 13 Culibratlom Records: lEsamination Notes:

M Status Angle Direction Scan Offset Slep Offset WAT-13 ICheck for limitations due to the proximity of the care stop lugs and hanncl I On 55 () + 1.40(in) - 1.35(in) 0803301 lower head instrumentation tubes.

.hannel 2 On 5- 1,40(in) - 1.35(i) 0803302 0

'hanel 3 lis SLK1C40 (f) + 2.00(im) I 1.72(in) 0303303

-annet 4 On S C40 (-) - 2.00() + 1.72(in) 003304 Esamination Remarks:

Shannel 5 On 01- (4) + 0.t"in) + 1.72(n) 0303305 Limited extuaination due to the proximity of the corc barrel hasnnel 6 oR1 N/A NrA #21 NtA N/A NIA anti-rotation lugs.

hannel 7 OfI N/A NMA N/A N/A N/A 3tnncl a Off N/A N/11A N/A NIA N/A Increment & Sca PoSltions Actual Recordabte Indications Analyst Remarks Sean No.a) Incremeust Position Scan Position Yes No NIA

Attachment:

Start Stop Start Stop Channel I O la 0 O Yes EZ No _

I -13 33395 34474 33436 16335 Channel 2 0 D Further Evaluation El 14 -11 34565 34926 11900 18002 Channel 3 0 21 0 Required:

Cliannel 4 0 la 0 O Yes 21 No

__ thannel 5 0 0 El Archive rape/CD No.:

_Channcl 6 0 0l la 3 A/Bl r Channel 7 0 0 Et Analysis Tape/Cl) No.:

Channel 8 I_ 0 l21I N/A I knalyst SNT Leve I Date-

.'rtI [I JA~rcz1-5 A SWIF . M..roUrsa r j v. 0*i)

I

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI- 17 Aftachments 3xam Number 23 Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis 122.36 - 123.29 Inc. Axis 342.87 - 350.97 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. AxiS 343.86 -

Scan Axis 117.89 - 118.82 Channel 2 Module Coordinates Inc. Axis 343.86 -

Scan Axis 126.83 - 127.76 Channel 3 Module Coordinates Inc. Axis 341.19 - 349.26 Scan Axis 118.91 - 119.84 Channel 4 Module Coordinates Inc. Axis 341.19 - 349.26 Scan Axis 125.81 - 126.74 Channel 5 Module Coordinates Inc. Axis 341.19 - 349.26 Scan Axis 122.36 - 123.29 Channel 5 Feature Analysis Summary Comnents No recordable indications chs 1, 2, 3, & 4.

tL.A--

(\ 1014 S E2A-50

I 1111 SOUTHWEST TECHNOLOGIES I

AUTOMATED ULTRASONIC EXAMINATION RECORD SitemPlant: WattsiOar Weld Identification: RPV-WO2-03 Frejet No.: 04-036X Pro1Rev/ChZ/ICN! ISwT-PDI-AUTI/Itl/O/&2 Examinatlon No.:

_ _ WeId Desrription: BHt-o-Lwr Sh (I79'-240 24 Mod.ConL: 07R Dftevce Cont;iration: WAT1WAI.CON-000 1 IScan Path Drawing: SP-WC2-03 Learn Date Examination Time Data Acquisition t imralor (s)I SNT level: Alan Schaefer I N/A SurfaceTent eraturelF I March 2005 Start End Start End Sttan Controller Fxrnielgirs Increment Axsh Plantted Conlroller: Actual Scan Axis Plxanned Actul.J PaR Lower limit 33395 Positionsl Paramener -5 33395 Lower Limit 17900 17900 Beam Direction:

Scan: Inoum ROWtle Upper limit 34925 Cw/Ccw 34926 Upper Limit 24002 24002 Transducer Size:

Increment: II ism IncrCnHcIt Ilcerval 90 t.00 Mode:

D(:l 3 C:dcof svrlap Auloninatic Scan Conveisbin Counts 1002 le Scan MWiltin: Conversion Counls I00 NuMber ofrScaUs:

tli-dircctiusal Cortvcrsion Ihlits Inches 18 Correction: Conversion Unils Degrecs Head RowatePosition Ocriault 90.00 Modute rarameters: iusIn. SSIY Hoist_(ivotPoint):

a7H Cml 13 NIA Status Angle Calibration Records: ERamination Notes: 08'OZ Directlon Stan Offset Step Offset WAT-13 Channeil Ii ____n_

(lhs for limitations due to th proximity of the core stop lugs and V -~ 0" I 94I Cltannct 2 On__ 55 h trumattation tubes.

M ( ) ._ I tO(in; 1.35tin) 08M33tl2 tbanndl3 -Onl Sllt 40- 21m.tOi) _

(4) _ 4 *1 72(in) CS03303 __

Chavnncl 4 of) SlIlt_40' tg Wh _

Uk t 1.72(ini) C08.3D~4 Yxiitnitition Remarkes:

Chantnacl S Oil° , li)_t1.72Zin _ O033D5_ _ Iimtited examinathon disc tathe pFULxxmtte tj Channcl fi _)f NIA _ of ttle corcbturei NJA_ NMA N/A _ nti-roatlion lups.

Chhnnel 7 tnlf N.A N:M NMA N/A NA ChCannal t NMA MA N/A NA N5A __A t I Increment &Scat Positions Actuat Recordabl Ind:alion Scan No.($) Analyst Remarks InuericntII losillun __an l wilion Yes No

_11 Slr!_q 9t NIA Atlachttent:

_ Ston Channel I U El 11n Yes 21 No 1 -13 3339S 34474 _

19472_ 2VWJ Channeil2 U [3] 01 further Evahiatbon 14 - 15 34565 34926w 1790tl _ __

24t)U2_ Channel 3 U3 13 ° RcqU!Fed:

.hanncl 4 EJ C_ 91 O3 O Yes [a No .

(:hwulcl S (I O (D Archlive Tape/CD No.-

___ _ Channel 6 El CI1 3A & U _

___C C hannel 7 0] n [3 Analysks'IlpeCVlNo.:

_ _(httnel S O O NM Atnalyst / SPIT I[vel I Date: _A _A 1531 FORUMN..UT M URlt- 5Y111 VAx q.j11Ircl;kt

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 24 Page I of 2 Watts Bar Unit 1 RPV-W02-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis 182.36 - 183.29 Inc. Axis 342.87 - 350.97 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 343.87 -

Scan Axis 177.89 - 178.82 Channel 2 Module Coordinates Inc. Axis 343.87 -

Scan Axis 186.83 - 187.76 Channel 3 Module Coordinates Inc. Axis 341.18 - 349.26 Scan AxiS 178.91 - 179.84 Channel 4 Module Coordinates Inc. Axis 341.18 - 349.26 Scan AxiS 185.81 - 186.74 Channel 5 Module Coordinates Inc. Axis 341.18 - 349.26 Scan AxiS 182.36 - 183.29 Channel 5 Feature Analysis Summary Comments No reckrdaLble indications chs 1, 2, 3, & 4 IK 11 11 2-C)OS E2A-52

a- IHI SOUTHWEST TECHNOLOGIES 43W AUTOMATED ULTRASONIC EXAMINATION RECORD ile/Plent: Watls Bar Weld Identification: RPV-W02-03 PrfltevlCheIlCN: ISwT-PDI-AUTI/OI011&2 Exarmination No.: 25 roject No.: 04-0368 Weld Desertption: BH-to-Lwr Sh (2396-300 Devic CoxAt ration: WAT-WALCON-0001 tod.Ccnt: 07B Scan Path Drawi% SP-W02-03 Easm Date Exaninsation Time Surface Temperature OF tilt Acquisitioc Operator(s)/ SNT Level: Alan Schaefer N/A March2005ta End Start End

.0I57. 0205 7 Seem Controller Parameters Inerenuest Asxi Planed Actual Seem Axis Planned Actual PositlonI Prnrametmr iontroiler PaR Lower Limit 33395 33395 Lower Unmit 23900 23900 Beam Direction: CwlCcw can:

icrement:

flxrn Rcotatc Ihoist Upper Limit Increment Interval 90 34925 34926 Upper Limit DC.

30002 3

30002 Transducer Size:

Code V ofOverlap:

100 10 B-dode Autoniatic Scan Conversion Counts 100 Conversion Counts 100 Number ofScans: 18

can Motion
Bi-directional Conversion Units Inches Convcrsion Units Degrees Head Rotate Position: 90.00 2Orrcction l)erault 88.19 88.19 Hoist (Pivot Point): NIA dodale Parameters: 07B Cal 13 Calibration Reeorda: lE ntminatlow Notes:

Status Antal Direction Scan Offset Step Offset _ WAT- 13 Check or limitations due to the proximity of thecore stop hug and '4 a ~0- ( M) a.

tM shamnel I On 55 (+)

M 1.40(in) 1.35(n) 0803301 low headinsrwnentationtubes hnnel

> 2 On S5 (-) 1.40(in) 1.35(in) 0803302 harnel 3 On SIXC 40 (+) + 2.00(in) + 1.72(in) 0803303 0 (W 2hannel 4 On SLIC 40 (;) - 2.00(in) + 1.72(n) 0803304 Examatrinon Remarks:

Zhannel 5 Oi 0o. (N) + 0.(I1) + 1.72(in) 0803305 Ilimited examination due to theproximity of the core barrel W~

-hannel 6 Off NIA N/A N/A NIA NIA anli-rotalion lugs, 0,  ;

Shannel 7 Off NIA N/A N/A NtA N/A Channel 8 Off N1A N/A N/A N/A N/A au

______Increment & Sean Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Channld I 0 1 0 E Yes 2 No 1 -13 33395 34414 25277 28634 Channel 2 0 (a 03 Further Evaluation 14 -tB 34565 34926 23900 30002 Channel 3 0 CZ 0 Required:

_ Clhnnet4 0 la 0 0 Yes 1 No

__ _ ___ _ Channel 5 0 0 2 Archive Tape/CD No.:

IChannel60 0 13 3 A/B I Channel 7 0 0 2 Analysis TapefCl) NqS.:

Analyst SN / Level T I Date:1n I___ _I (Url aeljO0 O 2 NIA jA IST VORM I. UT 5SJaR.,5MU

\I - \ -;<

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief l-ISI-17 Attachments .

Exam Number 25 Page I of 2 Watts Bar unit 1 RPV-Wo2-03 BH to LWR Shell Cursor Box 1 of 1 Scan Axis 242.36 - 243-29 Inc. Axis 342.87 - 350.97 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 343.88 -

Scan Axis 237.89 - 238.82 Channel 2 Module Coordinates Inc. Axis 343.88 -

Scan Axis 246.83 - 247.76 Channel 3 Module Coordinates Inc. Axis 341.17 - 349.28 Scan Axis 23B.91 - 239.84 Channel 4 Module Coordinates Inc. Axis 341.17 - 349.28 Scan Axis 245.81 - 246.74 Channel 5 Module Coordinates Inc. Axis 341.17 - 349.28 Scan Axis 242.36 - 243.29 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

~-1 Ql-kl-XII It r.oo E2A-54

4ft SlteiPhnt: Watts Bar Iffl SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD lWeld Ident tin: PPV-WO2-03 1Fr*lRev/Cltg/ICN: lSwT-PDl-AUT1I/0101&2 Exammnatien No.: 26 rojet No.: 04-0368 lWeld Descr M4*dConf 07B ISun Path I sg: SP-W02-Q3 I E. Date IWAxerninaloo Time I Surface Temperature IF bate Acquisition Operator (s)I SNT Level: Alan Schaefer / N/A I Start I End Start I End II March 2005 0211) 0220 7e 1 78 Sean Controller Parasmeter Increment Axis Pi 'ttted Actual Scan Ais Planned i Acttal Positional Prameters

-5 Controller: rR Lower Limit 33339 I 33395 ILower limit 30900 30900 Bcam I Direetion: Cw1CcW Scan: Boiom Rotate Upper Limit 334925 34926 UPPerlimit 36600 36600 Transducer Size. 1.00 Increment: [oisl Increment Interval 910 D(: 3 Code% orOvcrlap: 10 Mode: Autotnatic Scano Conversion Counts I 00 Conversion Counts 100 Nurnher of Scanc IS 0 h.4~

Scan Motion: ji-directional Conversion Units 1nches Convcrsion Units Degrees Head Rotate Position: 90.00 Correction: Default Radius in. 38At9 Hoist (Pivot Pointl NIA Module Parameters: 07R Ccl 13 Calibration Records: Esasmination Notes: aa Status Angle Direction Scan Offset Step Offset WAT-13 Check for limitations due to the poxintity of coe stop jugS and Cihannel I On 55 (4) + 1.40(in) 1.35(in) 0803301 lower head instrtumentation tubes. 0~ FF, Channel 2 On 55 (-- 140(in) 1.35(in) 0803302 Os -W 1 0,

Clannel 3 On SlI1C 4(l (V) + 2.00(in) 1.72(in) 003303 Channel 4 W(hamicl 5 On On SLIC 40 oil

(-)

(4)

- 2.110(in) 4 U.00(ill)

+ 1.72(inl

+ 1.72(in) 0803304 0803305 Esaminatian Remarks:

Limited examination due to the proximity of the core barrel

~;. o ("5c0 Channel 6 Off N/A N/A NIA NiA N/A anti-rotation lugi Channel7 Off NWA N/A NIA N/A N/A ChannelS8 Off N/A N/A NMA N/A N/A Increme-t & ScaePositions Actual Recordabh Indientions Analyst Remarka Increment Posidon Scan Position Yes No N/A Attaciment:

ScanNos) Start Stop Start Stop Channel I O 0 03Yes 2 No 1 13 33395 34474 31266 34632 Channel 2 0 i2 0 Further Evaluation 14 - 18 34565 34926 30900 36600 Channel 3 0 la 0 Required:

Channel4 0 E3 0 OYes E2 No Channel 5 0 0 2 Archive TapeCl) No.:

__ChanneI6 0 0 E 3 M3

_Channel 7 0 0 E Analysis Tape/CD No.:

A _ Charmcl 0 O NIA Analyst I SNT Level / Date \t FO7Mp,

. kJI cr (Yx1

Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Exam Number 26 Page I of 2 Watts Bar Unit 1 RPV-W02-03 DH to LWR Shell Cursor Box 1 of 1 Scan Axis 312.36 - 313.29 Inc. Axis 341.97 - 350.07 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 342.98 -

Scan Axis 307.89 - 308.82 Channel 2 Module Coordinates Inc. Axis 342.98 -

Scan Axis 316.83 - 317.76 Channel 3 Module Coordinates Inc. AXiS 340.28 - 348.38 Scan AxiS 308.91 - 309.84 Channel 4 Module Coordinates Inc. Axis 340.28 - 348.38 Scan Axis 315.81 - 316.74 Channel 5 Module Coordinates Inc. Axis 340.28 - 348.38 Scan Axis 312.36 - 313.29 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

'I Tor it rck,;

E2A-56

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD MitePlant: Watts Bar Weld tdentilesitionl RPV-W02-03 Pro/Rev/Cizg/ICN: ISwT-PDI-AUT/O/O/G&l2 "roject Na.: 04-0368 Weld Des crito: BH4o-Lwr Sh (299-366' Device Confiarstion: WAT-WALCON-OOOI Examination No.: Ua Viod.CoEf.: 07B Sean Path Drawiat: SP-W02-03 Exam Date Examitatioa Time Surface Ten perature IF

)ata Acquisition Operatr (s)ISNTLevcl: Ala SchaeferIN/A

  • I March 2005 Start End Start Ed 0236 0238 . .71. 78.

Scan ContIroller Parameters Incremest Axis Plnined Actual Seat Axis Planned Actoal Positional Parameters

introler: PaR Lower Umit 33395 33395 Lowa Limit 29900 29900 Beam Direction: Cw/Ccw Scan: otomRotatc tlrper Umit 34925 34926 Uppalimit 36600 36602 Transducer Size: 1.00 bLmoeileOt: Ihist Increment Interval 90 DC1 3 code % or Ovelap: to Mode: Altomatic Stat Conversiio Counts o) n ts 100 Nmer ofScans: t5 Scan Motion: BI-directional Conversion Inits Indl)t Convkrsion Units Degrees Hlead Rotate Position: 90.00 Correction: Default IRadius hi. 88.19 Hoist (Pivot Point): NIA 00 Module Parameters: 07R Cal 13 Calibralion Records: Exansinatten Notes:

Status Anile Direction Scan Offset Step Offset WAT-I 3 Check for limitations due to the proximity of the core slop lugs anid 0.

Channel I On 55 + 4- 1.40(in) - 1.35(in) 0803301 lower head instrumentation tubes.

Channel 2 On 55 - 1.40(in) - 1.35(i) 0803302 0 en Channel 3 On SI.1( 40 t) 4 2.00(in) + 1.72(i) 08311303 C haueul 4 On SLIC40 t - - 2.00(in) + 1.72(W) 0803304 Examination Remarks:

Channel 5 On 01. t4 +1Ot.(in) +1-1 72(in) 0803305 Limited cxtuninatiao duo lom tepoxisiity of the core barrel C 12 Channel 6 Orr N/A N/A N/A NMA NIA awitl-rotahion lugs.

ILiannel 7 orr N/A N/A N/A N/A NIA ChannelSa ITt N/A N/A N/A N/A NIA Increment Scan Positions Acual Recordable Indicatioas Analyst Remarks lncrement Position Scan Position Yes No N/A Attlachment:

.5 Start Stop Start Stop Cthannel I O l O 0 Yes 2 No 1-5 34566 34927 29900 36600 (Ihannel 2 0 2 0 Further Evaluation Chsiriel 3 0 l 0 Required:

Channel4 0

_ la 0 0 Yes E No (IChartnnel 5 0 0 (a Archive Tape/CD No.:

I Channel6 O 3 3 0 3 A/B

_Charriel 7 0 0 1 Analysis laIe*/I) No.:

-_ A _ _Chanmel SO 0 O NIA Analyst I SNT Level I Date'.: \ l wn n ISWr FORKMaurTso (R...9sas

minu Enclosure 2 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-17 Attachments Txam Numiber 26a Page 1 of 2 Watts Bar Unit 1 RPV-W02-03 BH to tWR Shell Cursor Box 1 of 1 Scan Axis 302.36 - 303.29 Inc. Axis 335.67 - 339.27 Depth In Material 4.19 - 5.35 Channel 1 Module Coordinates Inc. Axis 348.34 -

Scan Axis 297.89 - 298.82 Channel 2 Module Coordinates Inc. Axis 348.34 -

Scan Axis 306.83 - 307.76 Channel 3 Module Coordinates Inc. Axis 345.66 - 349.27 Scan AxiS 298.91 - 299.84 Channel 4 Module Coordinates Inc. Axis 345.66 - 349.27 Scan Axis 305.81 - 306.74 Channel 5 Module Coordinates Inc. Axis 345.66 - 349.27 Scan Axis 302.36 - 303.29 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

iA -kz)Q.

K_

-I~~~~iT_~

E2A-58

ENCLOSURE 3 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 Summary:

Due to design configuration of the reactor vessel, volumetric examination of the meridional welds during the WBN Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved. The design configuration of the core barrel stabilizing lugs and location of the lower head penetrations interfere with performance of an ultrasonic scan of the meridional welds, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of this component is required in accordance with ASME Section XI Table IWB-2500-1, Examination Category B-A, Item Number B1.22. The full volume weld examination requirement is illustrated by ASME Section XI Figure IWB-2500-3.

An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the meridional welds. The design configuration limits the best effort ultrasonic examination to approximately 67 percent to 85 percent of the required volume of each of the meridional welds. The volumetric examinations resulted in no recordable indications for Welds W2A, W2B, W2C, W2D, W2E, and W2F. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety.

In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requirement due to physical restrictions. Relief is requested from these examinations because the code requirement is impractical to implement.

System/Component(s) for Which Relief is Requested:

  • Weld Identifiers: W2A, W2B, W2C, W2D, W2E, and W2F.

Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.

Code Requirement:

WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-A, Item Numbers B1.22, Reactor Vessel Meridional Welds.

E3-1

ENCLOSURE 3 TENNESSEE IIALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 Code Requirements from Which Relief is Requested:

Relief is requested from the volumetric examination coverage of essentially 100 percent of the reactor vessel meridional welds.

Basis for Relief:

The design configuration of the reactor pressure vessel precludes a complete volumetric examination of the required volume for the Meridional Welds W2A, W2B, W2C, W2D, W2E, and W2F. The limitation is due to the bottom head penetrations and core barrel stabilizing lugs. The configuration limits the volumetric examination of the required volume as follows for each weld: W2A - 79 percent; W2B - 84 percent; W2C - 85 percent; W2D - 85 percent; W2E - 69 percent; and , W2F - 67 percent. Refer to Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.

Alternative Examinations:

In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations associated with the meridional welds.

Refer to Enclosure 3 Attachments, for the examination data reports.

Justification for the Granting of Relief:

The design configuration of the reactor vessel core barrel stabilizing lugs and bottom head penetrations precludes ultrasonic examination of essentially 100 percent of the meridional welds. The meridional weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT data recording/analysis systems. The target scope of the examinations included 100 percent of the accessible weld.

The examination coverage requirements for the meridional welds are discussed in Enclosure 5, Examination Area Coverage Report for WBN. Examination of the meridional welds is obstructed by the core barrel stabilizing lugs and lower head penetrations.

The design configuration allows for ultrasonic examination of approximately 67 percent t:o 85 percent of the required volume.

E3 -2

ENCLOSURE 3 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-18 The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume E-F-G-H is depicted on ASNE Section XI Figure IWB-2500-3. The core barrel stabilizing lugs and bottom head penetrations limit two-direction parallel and transverse coverage of the meridional welds. These components restrict the ultrasonic search unit scan surface.

Other examination techniques were also determined to be impractical for this configuration. Due to the design configuration of the lower head penetrations, ultrasonic examination from the outside surface of the vessel provides less coverage than ultrasonic examination from the inside surface and the outside surface has limited access. Use of AUT equipment from the inside surface reduces personnel radiation exposure.

The meridional welds received limited two-direction parallel and transverse coverage with the sound beam directed toward the weld. The results of these examinations recorded no reportable indications in Welds W2A, W2B, W2C, W2D, W2E, and W2F. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the meridional welds.

Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10CFR 50.55a(g)(5)(iii).

Implementation Schedule:

This request for relief is applicable to WBN's first inspection interval that began May 27, 1996 and ends December 26, 2006.

E3-3

ENCLOSURE 3 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INTERVAL INSERVICE INSPECTION INTERVAL REQUEST FOR RELIEF 1-ISI-18 ATTACHMENTS

1. Examinations Data Reports for Weld W2A Pg E3A-2
2. Examinations Data Reports for Weld W2B Pg E3A-7
3. Examinations Data Reports for Weld W2C Pg E3A-12
4. Examinations Data Reports for Weld W2D Pg E3A-17
5. Examinations Data Reports for Weld W2E Pg E3A-22 6 Examinations Data Reports for Weld W2F Pg E3A-27 E3A-1

ISwT Examination Summary Record Pmjd No: Sr: So,.y shir No.,

368 Watts Bar Nuclear Plant Unit 1. 300O33 Examination Area: Reactor Pressure Vessel Une/Asseubly. Lower Head Medidional Weld W2A o Idendtication: Lower Head at 0-degres T N HCD NDE PEoedu Eam, R E R"Cdmu Cff Mthod ReoJCh.Rcfl r _a h AG Ro R.-do AUT IS.T-POI-AUTIMo 5C AuMo . - AUTOforlthktn ome-u-.net .

ICNZ 6 AUTSLIC40 X - VM Eteene lTte due btoOm cre barrel 3UpPel tkgw d 0 C A.UT5C X . VU lerw eebd peo bet; ct, S AUI SLK4OT X . iVM CD 5 AUTJT5T X VIA CD CD6 0 0

'.4 f ' IC.

PaeopWd Sr. 7 9 Da: Veg: Summnty No: t

- @ S 1q2-Mat-05 1 OF1 300033

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMNATION RECORD Site/Plint: Watts Bar eiddezttflrtion: RPV-W02.A PreRlterICheCN: ISwT-PDI-AIITA/0i&2 Examination Mo.: 5 Project No.: 04-0368 DWDescription: Lwrld Meridilonal40' DerkenConfiouration: WAT-WALCON-001 _ _____N__

MeCori 07A Ien attl Drawing: SPMcriri Frei EnmeDate Erain *iop Tim SwAte Temper10reIF Daoe uAtorati/San d CoraiofsC rrontsi10 10CNeicho2005 Sttr1 End Sart Lod Sen Contr llercPia reters inmrientts Planned A onversic n nits gresi A tt Position:0.0me 0 Modu34lear Pc lrm3439 LowlcLimita eiioni e 1rd 14S0 BeamlDib DNtUp Scan, I..m pivot UpccL.. _ 3622 _ _a_ 3657 U ALimit - e a36623661 d TransdueroSiz he. e ea (3 Increment Berm Rotate lnrvanentriervtl 54._ DC] 3 _ _ C04 nde' Overlayp 10 -CD Mode. Autonctio Sen CuvronCenstb 100 ConerirmCounnb 100 Number of Sar. 20 Scan Motion: BI-direcin Cion on tbfit5 Degrees Converslon units Degrces Rea~dRoat Posidon: 0o Corrertion: Default Rsius 8819 Rtadiusn _r 88.19 1101st(PivotPodnt) 324.05 ~~ O Moduk Pargmi terr 07A Col 13 Calibr atonRecordis [E-minti.. ~Notos:

A..6"- ni*s~ V-01T nft sW.. OfF.S I WAT 13 C~heck lr rlimitatlons due to the Proximity ofthe lower head Channell OD 55 - - 140(in) 1.35(in) 0801301 inairumeninton tubea Chatned2 On 55 (4-_ + 1.40(in) - 1.35(in) 0801302 Ctramci3 On SLIC40 (-) - 2.00in) t 1.72(in) 0S01303 Channel 4 On SLIC40 + 2.00(in) + 1.72(in) 0801304 Examination Reanrks:

Channel S On OL (4.) + 0.00(rn) - 1.72(in) 0801305 Lnited examination due to thu olrximity ofthe corcbarrel Channel 6 Off NWA N/A NMA N/A NtA ant-rotation tugs and the lower head Instrnmentation tubes Channel7 Off N/A N/A NMA NIA N/A Channel S Off N/A N/A N/A N/A N/A

Ago=  ; ' E;i IFj Co 0

Increment & Seas ositiion Actual Recerdabl Indications Analyst Remark Scan No.(s) Incremnt Position Stan Position Yes No NtA Attathmetnt_

Stant Sbp Start Stop Chanadcli p El Dl Yes 3 No 1-20 35492 36330 1478 3662 Chsanel2 0 Ud 0 FurtherEvaluation Channel 3 0 1 0 Rrrnired:

Chanael4 0 0 QYas [21No

_Chnnel 50 a i Auitve Tzpe/CD No

- Chnnnei6 n 0 R I lA&B

_ _ ._A csal 7 0O Arnalysis Tape/CD No

//1 Ciannela El NtA AnslysttSNTI1eveI/Dste: ( 4/ _ r t/

rMToaiKu er,. (t.e'AsZ)

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Lispection Program Request for Relief 1-ISI-18 Attachments Page I of 2 Exam Number S Watts Bar Unit 1 RPV-W02-A LWR Ed Meridional a 0 Deg Cursor Box 1 of 1 Scan Axis 15.64 - 16.57 Inc. Axis 359.48 - 4.34 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 0.40 - 339.62 Scan Axis 18.56 - 19.49 Channel 2 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5 Channel 2 Module Coordinates Inc. Axis 0.40 - 339.62 Scan Axis 12.71 - 13.64 Channel 3 Module Coordinates Inc. Axis 358.25 - 3.09 Scan Axis 18.14 - 19.07 Channel 4 Module Coordinates Inc. Axis 358.25 - 3.09 I :  :

Scan Axis 13.13 - 14.06 I Channel S Module Coordinates Inc. Axis 358.25 - 3.09 Scan Axis 15.65 - 16.58

/0 M k44 ao wJr E3A4

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plhat: Watts Bar W Meartllostleu RPV-W02-A Pi?/Rn eACN: ISwT-PDI-AUTI/0/0/1&2 Eseub n C.:

PreecttN: 04.0361 Wlt

Description:

LwMrHdMeridionalil 0 Device Colra : WAT-WALCON-0001 Mod.Csut: 07B sm Patl Drawla SPMerid E Dthxasiale Tie. Surfaee Tempera F Dubs Acquisition Operator (#)I SNY Levekl ). Rle~mauaiI St 181e 'l8l End 1i30 I Start 78 Find 71 t n

0.

Sean Controller Parameters lacreeeat Axis Pluaned Actual Se Planned Actual Positional Parameters 0 :

Controller: PaR LoweriLnit 1160 1540 LoweLiml 34986 34936 Beam Direction: Cw/CcW (A Scam Boom Rotate UppDLimut 3698 3699 Una lUmit 37014 37014 Tranduer Si= 1.00 0in b.Meat Boom Pivot lnmemase interval 54 DCI 3 Code % of Overlap: 10 Mode: Automatic Scan Conversion Cott 100 Converslon Couns 100 Number of San: 48 2. W Scan Mbtion: Bi-direcionnl Conversion Units Degrees Conversion Units Degrees Heed Rotate PositiO 90.00 , f4 Cafrection: Default Radiw In. 88.19 EDAS Radius n 88.19 Hoist (Pivot Point): 324.05 0-o Module Prameters: 071 Cal 13 Colibrte Recerds: Eaasbto Notes: g two-p" CDkw osais u i. Dhuijeiu^ Scua..... I. J ...... . _ . AT1 A . lbn_:

....onut t4 e.... ..........

hanenell On 55 +) 1.40(n 1.35( In 0801301 instrugnentatiouetubes. F, Channel2 OR 55 -* 1.40(in - 1.35(in) 0801302 ue -

Channel 3 Channel 4 On On SLIC 40 SUC 40

+ +2.00(in)

- 2.00(iRi)

+ 1.72(in)

+ 1.72(in) 0301303 0901304 9a-miuatie. fwrlme

+01 l11 "j 0 t::9 Channel 5 On QL + +0 m) + 1.72(n) 0801305 Unisted examinaeilo due to the proximity of the core barrel R. R Channel 6 Off NMA NA N/A NtA NtA i-ratiottlo s andthelower head instrmnatation tubes. EL Cln 7 Off N/A MrA NVA NWA N/A Limited scan due to prodmity ofoore lugh °. M Charel8 Off MA NMA 1VA 1/A NVA 0 Iereeset & Sfce Positions Actuel Rncdae _lyittrarks .sltlea CD C Som No() bnencm Positio.^

Start StDO I Scan EPosidork Start Sto t Yes InEllO0 No a

7 NIAAtuiment:

L Yes la No 2,t4

_i 3320 34936 37014 Channel 2 n 13 E FortjerEvaluation Qculoae 3 n CI 0 Reqd W Lha2ol4 0 la n o Yes E No Chennet 5 0 0 C1 Ardcive TpeCD No.: 9

,Casnel 6 0 0 la 2 hEB

_ channel 7 n la AnalysIs Tape/CD No.: I la d _ E3 -( I N/A Analyst ISNT Lyeel / Date:;Z / Z P iOWoM 3. SiTU t k.O\5

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request f:r Relief 1-ISI-18 Altachments Exam Number 6 Page 1 offI /

Watts Bar Unit 1 RPV-W02-A LWR HD Meridional a 0 Deg Cursor Box 1 of 1 Scan Axis 354.13 - 355.06 Inc. Axis 14.67 - 19.53 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 26.20 - 31.01 Scan Axis 351.21 - 352.14 Channel 1 Feature Analysis Summary Conmments No Recordable Indications channels 1, 2, 3, 4, and S.

Channel 2 Module Coordinates Inc. Axis 26.20 - 31.01 Scan Axis 357.06 - 357.99 Channel 3 Module Coordinates Inc. Axis Scan Axis 351.63 - 352.56 Channel 4 Module Coordinates Inc. Axis Scan Axis 356.64 - 357.57 Channel 5 I Module Coordinates Inc. Axis  : i Scan Axis 354.12 - 355.05 1'i i

46 009 l

-// ",VW Zoe J E3A-6

ISwT Examination Summary Record Prnjct No: lsiaMMaY Shi NoW:

368 Watts Bar Nuclear Plant Unit 1 1300008 ExaminaUon Are: Reactor PssureVessot UnelAssembly: Lower Head MerdIlonal Weld W2B O Idennstion: Lower Head at 60-egrees N

T H

t NOe EMA R e Reoluom CNP iSIJ~hmACH Numbefst Ep Artmi I _ Anaift Record NO. Renmef AUT IwrT-4OI-AUT1I/Q 7.8 AVTO . . AUTOfor Vtimens asumoe only.

iZN 2 0 AUTSLC40 X VM Exsknon iWNWed don b* Ce core barel sppor ks md S AUrS5 X VM he boer hed pSoe 7 AUT SUC4OT X - VI 1 AUT55T X - V CD CD

-4W-i 0.

CD, Prepd By. Ao ID: -Pgo. 1 SummayNo:

IF (- 1 I124-ar-05 OFtI300008 I U 4*1/

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitelPlast: Wafts Bar Wddide1ti6teatim: RPV-W02-E Prailt"/ChacN: lSwT-PDl-AUTI/010/lt2 Ene i N*i 7 Project Ne.: 0440368 sideDesription: LwrHdMaidikma6l DeviceCeafigrtia: WAT-WALCN-0001 Med.CaEf: 07A ISa. Path Drawisn SPMcid Eam Date Exauminatio Time Surface TsIamear IF Data Acqlsitha Operator (s)/ Bii Lval-: Cario eL s mrs / t Al St l End

.1M1 M 16,S17' IC31 78 78 Stan Centrefers Parammters lmemrtAils Planned Atest SesaAlts Phaned Actual eomttnal arameters Controller: PaR Lowerliht 5496 5496 Lowerljmt 1160 1480 Beam Diredon: Dn/Up Scme BonaPivot Lwer Limit 6522 6522 UppLmit 3662 3662 Trans izcer 1.00 Ibnrneni Boom Floe biereent htmval 54 Dd 3 Yd%of Overlp: 10 Mode: Autmantic Scan Conversion Cunbts 100 Conversion Counts 100 Nunmber of Scw. 20 ScaaMotion: Bl-directitnl Conversion Usite Degees Convertion Units Derees Heed Rotae poshim: 0.00 Correclion: Default Radius In. 88.19 ___________loist (ivotPoint): 324.05 u:00 Medale Parmntsem 07A Col 13 Callbratlo. Records: IE1Anw Nd.es .o states ASIPe ujymues MWAM Lnaa Simp Giu m; -h oi ho Channcl I On 55 (-)

  • 1.40(in) 1.35(n) 0801301 Instrumentation tubes.

C D-IO' Channel 2 on 55 (+N + 1.40(in) - 135fn) 0801302 Chanelt3 On SLIC40 (-) . 2.001in) + 1.72(in) 0801303 Channel 4 On SUC 40 +) +2. Wip) + 1.72(in) 0801304 raeuulmatilaa Reiarls:

Cmbnnel 5 On OL + + 0.00(in) + 1.72(in) 0801305 Linuted exsmination dueto the prxlmity ofth core brel Channel 6 Off NIA N/A NIA N/A NIA anti-roation ulgs and the lower head instrumentstimo tubes.

Channct7 Off NIA N/A NIA N/A N/A channel I off N/A N/A N/A NIA I NA Increment & Sean Pasitisus Adevl Rcotrdable Indications A, WRemarls Incremnt Position Scan Position Yes No NIA Aidasnte n tzl ScanN_ .) Stait sto Start Stoo Channel 03 EaI Yes i No I - 16 5498 6306 1478 3662 Channel 20 2a 0] Fiurtr Evaluation 17 -20 6361 6525 1478 2999 Channel3 0 2 0 Required:

__4 03_laCluuinel4 le 0 OYeaW No Channel 50 0 [a Archive Tape/CD No:

Channel 6 O 0 I 2 A__

channe 7 0 n ( Anslsis Tape/CD No.: _

) ChannellO i0 G N/A __ _ _ _ _ _ _ _ _ _

Aaalyst SNT Level Date: - - /

aWrn oams UTSrtie. am)

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number Exam 7 Page 1 of I w Watts Bar Unit 1 RPV-W02-3 LWR Rd Meridional @ 60 Deg Cursor Box 1 of 1 Scan Axis 14.89 - 15.82 Inc. Axis S9.48 - 64.34 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 60.38 - 65.25 Scan Axis 17.81 - 18.74 Channel 1 Feature Analysis summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 60.38 - 65.25 Scan Axis 11.96 - 12.89 Channel 3 Module Coordinates Inc. Axis 58.27 - 63.06 Scan Axis 17.39 - 18.32 Channel 4 Module Coordinates Inc. Axis 58.27 - 63.06 Scan Axis 12.38 - 13.31 Channel 5 Module Coordinates Inc. Axis 58.27 - 63.06 Scan Axis 14.90 - 15.83 4CA/04 2Z2 //,ore Z7°J-E3A-9

111H SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/flee t: Wat Bar aidid eatha: RPV-W02-B tPua vf(n 1CiR: iSwT-pFlt-AUl/0/OtfV1& N: S Pr.ect Na.: 04-0368 lWidlD lpti: LeerndMeridonal g60 vD Casllwrstona: WAT-WALCON-0001 Mad.Caf: 07B ISeas Path Drawine: SPMwid Esxa Date Examinatien Time Suafte T.-peratre. eg Data Aeqisition Operatar (a)I SNT Level: David IL ldelajam/ IU 2ad Start Start i End 164 1638 78 1 7 Sea Controller Parameters Iacnesurt Axi Ple d AelUst Sean Axis Pleased Actual Positional Parametera Controller: PaR Lower Limit 1160 1414 LowerLmit 4986 4986 Beam DkrcetiOm CW/CCW ScanBm Rotate U Lpp imit 369i 3700 Upp limit 7014 7014 Transducer Sim: 1.00 Incmtentt Wean Pivot Inement Interval 54 DC] 3 COdeofOveaip: 10 Modet Automatic Scan Conversion Cotnts 100 Conversion CorntJ 100 Number ofSauns: 4S Scan Modon: Bi-directional ConverilontUnits Degrees ConversionUnits Degrees Heag RotatePositiont 90.00 Correctim: Default Radln In. R8.I9 EDAS Radius In. 8S.19 Moit (pivotPoint): 32405 CD3 Mud0le Parametei: *7B Cal 13 Callbratioa Records: lxamlnotbn Noates:

Stata. Aale 1rertina Rea.Offseat SWf Offeat WAT.1 lChankforlimitations due to thenrolmitv of the lwerhad Clannel 1 On 55 (4) + 1.40(in) - 1.35(ir) 001301 Instrumentalionitubes.

Channel2 On 55 (-) - 1.40(fn) 135(in) 0801302 Channel3 On SiC 40 (4) + 2.00(in) + 1.72(in) 0201303 Channel4 On SXC 40 (-) - 2.00(irO + 1.72(ib) 0201304 Examination Reanri:

Channel 5 On OL (4) 0.00fi) + 1.72(in) 0801305 Lbnited minatian duo to the uriitofthe re be Channel 6 Off NtA NtA N/A HtA N/A anti-rttian lugs and the lower head insbrutntasion tubca.

Channel 7 Off NtA NtA N/A N/A N/A channel Off N/A bV/N I AA N/A INA W0Q Inacrmeat & Scan Posltions Actual Recordable Indieatins Analyst Remsarl Incremnt Poseition Sean Poeition CD -.

SSatNo Stsrtr) S Start Stop Channetll Yes 0 No

[ a NI Atndtament:o Yes E No I- 44 14S3 34S4 4986 7014 Chanoel 0 0 Further Evaluation O

45-4S 3533 3700 4926 6432 Channcli 0 A 0 Required.

____ __ li 43 O Fd 0i D Yes No ChannelS 0 0 2 Arxdive Tap/CD No.:

_Cbannel 6 Ci a 2 2 AtB

_ C 7 0 Ci la Analysis TaWCl) No.:

__Cannel

_ t___ S 0i A N/A Analyst I SNT Level 1Date: / ga /, / .

,SwFoamN.. Ufa M..Mola)

Enclosure 3 Watts Bar Nuclkar Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number Bxam 8 Page I of I 4 Watts Bar Unit 1 RPV-W02-B LWR HD Meridional @ 60 Deg Cursor Box 1 of 1 Scan Axis 54.13 - 55.06 Inc. Axis 14.67 - 19.53 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 25.62 - 30.49 Scan Axis 51.21 - 52.14 Channel I Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 25.62 - 30.49 Scan Axis 57.06 - 57.99 Channel 3 Module Coordinates Inc. Axis Scan AXiS 51.63 - 52.56 Channel 4 Module Coordinates Inc. Axis Scan Axis 56.64 - 57.57 Channel 5 Module Coordinates Inc. Axis Scan Axis 54.12 - 55.05

/=/ Me04-E3A-1 1

? 0 a pit

~9~e AA an -

1dpl. IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SiteJaltso: Watts Bar W0 idIdtilet RPV-W02.C Pro/Rev/Clm/ICN: ISwT-PDI-AUTlJ/0/II&2 lxgulaattla No:

TroectsNe: 04436i WeldaDejdbe: LvwrHdMeridioaol 1? 'DevlceCon araeton: WAT-WALCON-4001 M d.Conf.: 07A Ssa P ath Drawlnr SFN~idt Exam Date Es aatton Tim Surface Tern turn IF Data Aequisitieo Operateo (s)I SNT Lw*: Cari sL Serrers l HI 10March 2005 Fad Stea I Ed Seas Co.t reller Parameters IEarewsent Ais - Pleased Actual SeamAish Planned Actual Positional Foeastetrs g2-Controller. PaR lOWerLimit 11496 1149t LowerLimit 1160 1480 BeamDirection:

Scan: Boom Pivot UpperLimit 12522 12522 Uper Limit 3662 3600 Trasduccr Size: 1.0 Increment Rnom Rotate TDnsunmt interval 54 WI 3 Code % of Overlap: 10 Mode: Automatic Scan Conversion Cout 100 Conversion Coumts 100 Number of Scans: 20 Scan Motion: Bi-directioni Conmrion Unit Degrees Conversion Units Degrees Had Rotate rosition: 0.00 Coirecton: DLleht Radius IL. S1.19 Radius in. 81.19 qoit(PiivotPoint): 324.05 rA 0 0 Mdedal Parnsetnteu. 07A Cal 13 Calibration Records: llixamhntion Note:

Sb.t. A..I. TV.-I.. ..0 ngife 5 tq tffse WAT-1I3 Chadi for limitations dcn totthe oronuimitv of the lwaer hatd mannelet On 55 - 1.40(in) 1.35(in) 0301301 Instrumentation tubes.

Clsael 2 On 55 + 1.4(in - 1.35 n) 0801302 Channed3 On SLIC40 1 - 2.00in + 1.72in) 0801303 Channed4 On SUC440 N + 2.00(in) + 1.72(in) 0801304 xaauluistion Remarks:

Channel 5 On OL (+) 0.oo(in) + 1.72(in) 001305 lmitehd waminstion dowto the proximity offt m rthbarrel Channel 6 Off MA N/A N/A N/A NMA anti-rotation lupi and tbe lower head instrunentation tubes. .1.

Csnd7 Off N/A N/A NMA NIA N/A Chmnell - Off N/A N/A MA N1A NA enn -

____Incremenet & Sca. Pesitioms Actual Recordable Indicatiens Analyst Remarks Scan No.(s) h Porslition ScanPosition Yes No NWA

Attachment:

Start Stp Start Stop Channe IO [ -O 0 Yesa NO 1-20 1411 12527 11497 3602 Channel2 0 Li i3 FurtherEvaluation Catnnel 3 0 21 0 Required:

Channel4 0 21 0 0 Yes GI No

_ Channel 5 0 0 2[ Archive Tspc/CD No.:

-_Channel6 [0 0 l 2A/EB Channel7 0 2E Anadsjia TapeCD No.:

_ Sb nt i S O i3 El N/A Aalyst / SNT Leval I Dat r // N/A UObT5OMIII. 0THeB..Gwfl)

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME) hiservice Inspection Program Request for Relief 1-1SI-18 Attachments Exam Number Exam 9 Page l of I w Watts Bar Unit 1 RPV-W02-C LWR Hd Meridional a 120 Deg Cursor Box 1 of 1 Scan Axis 16.96 - 17.89 Inc. Axis 119.48 - 124.34 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 120.44 - 125.27 Scan Axis 19.88 - 20.81 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 120.44 - 125.27 Scan Axis 14.03 - 14.96 Channel 3 Module Coordinates Inc. Axis 118.25 - 123.09 Scan Axis 19.46 - 20.39 Channel 4 Module Coordinates Inc. Axis 118.25 - 123.09 Scan Axis 14.45 - 15.38 Channel 5 Module Coordinates Inc. Axis 118.25 - :23.09 Scan Axis 16.97 - :7.90

// Hwa< ZOOS -

E3A-14

__11L_ 1IHI SOUTHWEST TECHNOLOGIES Mw AUTOMATED ULTRASONIC EXAMINATION RECORD Lite!Tbaat Watfts l~ar eld Ideatificatiom PruiPZwIChwIcN: ISwT-PDI-AtfIJV0/Q11k2 Elermnsatie No.: 10 IZ uenee sos

-=_-(GR..

nIUZIIU _@W--,. T VA _nnnl MIod.C011L: 07B 13cms lath Drawiui - - - stonTis. Surface Tearperattre CE Dati&Acquhloltlm peretar (a)/SNT Level ai 0hKeea start I Rad St.rt I Ein 10 March 2005 1~j05 7 171 781 78 Stan Coatraller Parawaaterg Iueroaaut A-&a plans," I IActual Scan Asia ... a".!aw I Palica Przutr Controller PaR Lower [Urnit 1160 1537 lLowerLUit 10986 I 10986 Beam Direokxc CwICC%

Scaw Baoom Retain Upper Limit 3698 1 3698 1Upper liit 13014 l 13014 Tr.ndic Size: 1.00 Inceremenit: Blomn Pivot lacreavent Iuntral 54 DC[ t node %of Ovprlw. 10 Mode: Automnatic Scan Chavarolon Coantst 100 Scan Motion: DI-dL-eeiloaal Ccavualioa Urjth Duei to 0oavwrsiort Counts Conversion Units 100 DVerees Numuberof Scams:

HeadIlotale poaition:

48 90.00

~. .

Correction: Default Radius In. 381.19 Rn AR no1i .. In 81.19 Floilf (Pivnt Mra!nf 3240n1 1,

., ._ a ,.d_ . t. . ._ . ___,. ................ ,_a,,,

Medale Paramseters: 07B Gal 1it Calibration Recacrds:

SWot...- A..ot. - Dircdr.f., 5.... oW.t 5tt lf-

%I I WAT-13 m Channel I on 55 (+) + LOWCm . 1.35(in)

-r it 0801301 41 as due to the rroxdmity of the lower head anlation tubes.

0 E wrial 2 on 55 Id1 - 1.40(in) - 1.3511aa) 0801302 - w Shanoi3 On t StC_40 ) C200 hai mFl.72(in3 l 0l01303 Ch -n d4 On S 3 C40

  • 4Z.00in) +31.72(in) 0 g 0 jetlo 0801304 Retttoi:  ; o0 n

2harwed 5 Q~d6 oft Of ot NiA 1O + 0,00(in) +11.71(uk) 1 0801305 1Limuited examination due to the proximity of the, core banrel NMANA NANA adrttnlg anbdthe lower head in oon tubgs. Ci2 Chauaaci 7 off N/A NtA NIA N/A N/A

_Cannel8 Off N3A N0A _NA NRA Nr A Scan No.(s) incrent Swt-o position Yes No Nt.

Attachment:

a -4 1537 3698 10966 13014 _ _

Channel2 03 la _hae4 O FurtherEvalation. _ _ -Ye~N

_ A~~Cannad 3 0 1 cusd

_ Chandel4 0 Ela O3 O3 Yes 13 No Chatnrz 5 0 0 e ArchiveTapeTCD No.:

_ _Channdl 6 0 O1 lai 2 AlItR

___ __ __ _ Channel 7 0 n 13 Analyss Tape/ No.:

A s _ S_ Cevuell 8 0 0 la N/A Analyst I SiNT'Level I Dd a ,t//_

KWT10111 M. UTsa ta.-VA2

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number 10 Page I of 2 Watts Bar Unit .

RPV-W02-C LWR MD Meridional

  • 120 Deg Cursor Box 1 of 1 Scan Axis 114.13 - 115.06 Inc. Axis 14.67 - 19.53 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 26.18 - 31.01 Scan Axis 111.21 - 112.14 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 module Coordinates Inc. Axis 26.18 - 31.01 Scan Axis 117.06 - 117.99 Channel 3 Module Coordinates Inc. Axis Scan Axis 111.63 - 112.56 Channel 4 Module Coordinates Inc. Axis Scan Axis 116.64 - 117.57 Channel 5 Module Coordinates Inc. Axis Scan AXiS 114.12 - 115.05 AIE=

.4 a- /1 2j'.2'Ov'r E3A-16

ISwT Examination Summary Record Pnreect No: Sft: l ry Shet No.:

388 Watts Bar Nuclear Plant Unit 1 300034 Examinlaton Area: Reactor Pressure Vesrel Lne/Assembly: Lower Head Meddional Weld W2D 0 Identification: Lower Head at 180-degrees T N.e P... e R E Resoluln CNF AUT Is3r-eeAvuTrIO 11,12 AUMo AUTOkwlrmese rneeeswemer, s ory.

CN2 12 AUISLIC40 X VM EvwnellonnftbduetoetefvbandppolkWand 0O 12 t1 AUT55 AUT SUC4OT X

X VM VM e Iwshead penetr CD o,

C 1 . A . X l- 1dM CD 12o4to PvVredmy: .n>~swnemy ftge j No-IwOF1 2aO 300)034 _i IEn

,1lI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMNATION RECORD SitePlnt: Watts Bar Weld IdenUflatiod: RPV-W02-D _ Pr/o11tesCaCK: lSwvr-PDl-AUTrfl/tOl&2 ExamlhstlinNo: ll ProJeetNw 04-036< Wel lcripton:

LswdiMcdionsal8 D evkeCaiiratb WAT-WALCON-0 01 Mod.Ceaf: 07A ScanPathDrawiny SMclid EDe j Examination Time- Srfe Temn~ot]re Date AcqjisitionOperator(s)/SNTLevel: CarlosALBarrera ilfl ltMo 2005 Rt.t rt lia stdrt i 1552 1601 79 1 Stan Contrafler Parameten Increment Axis Planned Actual Scan Axls Planned l Actual Positional Parameters Controller. PaR LowerLimit 17496 17496 LowerLinit 1160 14S0 Bem Direction: DI/Up Scaw Boom Pivot UpwerLimut le 13522 18522 U Limit 3662 3600 Dansducer Size: 1.00 Incenezmt: Boom Rotat Increment bfteal 54 DCi 3 CodeofOvefltp: 10 Moie- Allomatic Scan Conesonunts 100 ConvmwfiopCounts 100 NucnbcrofSans- 20 Sean Motion: Bi-directional CoawnionUnits Dege Conversion Units Degres HeW R osNitin: 0.00 Correction. Dd~iut wi'ln. 8E 19 Aadhiswln _ 8.19 Hoist(Pivoft Paio): 324.05 MotticParamsefra: 07A Cal 13 Cal.brot'--t-ocards IExamiotnationNoter.

Status Angle Dbection Scan Ultset ftoet atepbweIc- s d:. la ato ot-e --- --

33 Channel I On 55 (-) - 1.40(i() 1. C _ 0301301 instrumofltationkrse._

tlhnoel2 On 55 _ _ - .40(l _- 1.ft 0801302 Ei 8 0 Channel 3 On SLif' 40 (-) - 2.00(in) + 1.72(n) 030130 2 72 Channel 4 On SLIC 40 () + .00(in) + 1. (in) 0801304 Examination Remarks:

channel 5 On 01. (+) + 0.00(u) + I.72(in)

Charnel 6 Off N/A N/A N/A N/A 0801305 N/A Limited examination dueto the proximity oftihetcore barrel anti-rotation IUgS tmd the lower head instnrurnuetion tabes.

7besel7 Off hVA N/A 2/A N/A N/A CD)

CD/S0 0~

Channel S Off N/A N/A N/A NtA N/A Increment &Scna PssitionseActual Recordable lidiecalna r AnalRytarks ScanNo(5) posit Pion Sci Posi'tion Yes No NIA Atachmen__

Stoat S Start Stop Chtamdl I D 33 0 Yes ' No 1 -20 17494 18527 1478 3602 Channel2 G] P FtxlterEvslutoion

___ ______ __ __ __ _Channel 3 Q Q Required: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Ci__lunnde c4 _ ' El I D Yes 0 No

__ Chtannc15 [ O 0 AeoiveTarte/CV No.:

_.__ __..Channel6 I A_______________ _ _ _

_ Channel 7 G O 2 ufalsbTapc/CD No.:

___ChanlnlS 0 0 13 N/A __

Analyst I SN T Level I Date. //

1swFOR14 "a)sS //5 777 e

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-18 Attachments Exam Number exam 11 Page 1 of 2 watts Bar Unit 1 RPV-W02-D LWR Ed Meridional e 180 Deg Cursor Box 1 of 1 Scan Axis 17.77 - 18.70 Inc. Axig 179.48 - 184.34 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 180.42 - 185.27 Scan Axis 20.69 - 21.62 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and S.

Channel 2 Module Coordinates Inc. Axis 180.42 - 185.27 Scan Axis 14.84 - 1b.77 Channel 3 Module Coordinates Inc. Axis 178.25 - 183.07 Scan Axis 20.27 - 21.20 Channel 4 Module Coordinates Inc. Axis 178.25 - 183.07 Scan Axis 15.26 - 16.19 Channel 5 Module Coordinates Inc. Axis 178.25 - 183.07 Scan Axis 17.78 - 18.71

.ZYZ? / H0 -

E3A-19

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitePlantt Watts Br Webld dentlfeaItion RPV W02-D PriRevituICN: ISwT-PDI-AUTI/0/OI&2a 12 ProjnetlhN 04-436 WeldDeseriptlee. Lwr dMcridional 18 Device.Conftistow WAT-WALCON-0001 M[Cea 07B Scn palt Drawin SPMrimd Exam Date Exarnin Time Surface Tern pratar IF Data Acquisition Operator (a)I SNT Lewd: David ELJaeinjia /111 IO Marih 2005 Start E1d Start End 31720 I1733 78 78 CD P.

Sean Controller Parnsdter Increment Axis Planned - Actual Scam Axis planoed Actual Positiool Parameters Controller PaR Lver Limit 1160 1538 Lower Limit 16916 16998 SeanmDirection: Cw/Ccw Scan Boom Rioate Upper Limit 3698 369 Upper Limit 19014 19005 Transducer Size: 1.00 inurement Boom Pivot kK=ent hfteva 54 DCl 3 Code % ofOverlap: I0 Mode: AtwomatieScan Conversion Courta 100 Conversion Counts 100 Number of Scans: 42 Scan MotioiL Bl-directionad Convesion Urnis DegreCe Convcrvion Units Dore Head RowaePoskion: 90.00 Correction: Default Radius in. S8.19 EDAS Radiuso In 2.19 Hoist (Pivot Point): 3U.05 Medal. Paraonetern: 070 Cal 13 Calibration Picrdas jExamnation Notes:

_ tgh.. A.aai. fle . R.ROffst St.. offe t WAI a Chedc( for limItations due to the Droxnmltv of the lowerhead CharaelI on 55 (4) +1.40Cn) - 1.35(in) 0801301 lnstrumentation tubes.

amC utal 2 On 55 - 1.40i) - 1.35fin 0801302 Chaimel 3 (n SLIC 40 4 +2.00(in +1.72(in) 0801303 Channel 4 On SLIC44 - - 2.00(in) . 1.72(in) 0801304 Exanmiaslon Remaerk:

Channel5 On 0L +) +0.00finl +1.72(inl 0801305 Liomitedexaninaticndutothe proxiityoftheoreebarrel Channel 6 Off NlA N/A NfA NA NWA and-rotauon lugs and rhe lower henad inostrumnaotin tubes.

Chanoel 7 Off N/A M/A N1A N/A N/A Chanel I Off N/A NtA NA N/A NMA Increment & Sean Psitions Actual Recordable Indlcstla __ _ Anays Eeafat Scan No.(s) Insnt Position ServoPositn Yes No NTA Attaonent!

Start Stop Start Stop Channl I0 0 0 Yea5 No

.-42 1532 3692 169S6 19014 rnnel 2 0 0 lFurtherEvlunttion Channel33 E 0 Required!

C Cl___d 4 a a0 o Yes No Channel s 0a 0 A AEi hive Tape/CD No.:

. . Channel 60 G O 2 A/R Channel7 0i O 1 Analyis Tape/CD No.:

Cht/nel 8 a lad N/a nslyqtb~

N/ee I ae!9 0 = 1- / / Hfe ;z@oos

'ew e soa sI. UTsa ta... ol

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME) hiservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number 12 Page 1 oflI Watts Bar Unit 1 RPV-Wo2-D LWR HD Meridional S 180 Deg Cursor Box 1 of 1 Scan Axis 174.13 - 175.06 Inc. Axis 14.67 - 19.53 Depth In Material 2.29 - 2.94 Channel i Module Coordinates Inc. Axis 26.17 - 31.01 Scan Axis 171.21 - 172.14 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 26.17 - 31.01 Scan AXis 177.06 - 177.99 Channel 3 Module Coordinates Inc. Axis Scan Axis 171.63 - 172.56 Channel 4 Module Coordinates Inc. Axis Scan Axis 176.64 - 177.57 Channel 5 Module Coordinates Inc. Axis Scan Axis 174.12 - 175.05

/ N""f 70OPj -

E3A-21

ISwT Examination Summary Record Proje No: l te: ISulary Sh.ee N.:

3sr Watts Bar Nuclear Plant Unit 1 300011 Examinaon Area: Reador PressuNSVend UneAfssaeblyj: Lower Head Merldiornl Weld W2E o IdentIfication: Lower Head at 240-degrees T N H N ProcedurE exm it e Resoludon COr KReiCthqACN Numbe I E-m +/-IAe R Anahz Record NM Remoft AUT LSwT.PDOIATIIMWo 13,14 Aro . - AUTOfor #**oe menurernntody.

ICN 2 14 AUISUC40 X vU Exodvtnh dtede N Oreco baerl snpod 3ugs mt 14 AUTSS X - VIA terluweh-d p _V 13 AUTSCICT X _ VM iS AUTr5T X - VIN 02 Pr.pared 1/.r Dam O:S ry Ho,

~ 12-Mar-06 I OI o 1300011 l \-)

_, D-IEII SOUTHWEST TECH1NOLOGIES UAUTOMATED ULTRASONIC EXAMINATION RECORD Sie/flat: WtisBar MeldIdeatillention: RPV-W02-E - ra/Re'tlCftch  : ISvwT-PD1-AUTI/0/0/t&2 Examinatioao.: 13 rrject No.: 04-0368 lWeldDesription: LwrHdMcidnrncam 24 DeviceCemflguration: WAT-WALCON-000 _____ntin _____13 Mod.C u£ 07A IIc!?axrte Drn~arbE SPCend !Exambte _ e ExainSation Tim Sarflle l'e pendtur'F Date Acquia~iteo&0M*We(s)fSiNT1,ave: C~rl*"M.Bmrnra/lil 10 March 200 l Start i End Start LaEd Tav8CrnMIarr/NI atAcutlaprtr)I 1537 2544 78 '7 8 t

Sca Controller =rmelern Inerement Ahls Planned iA_ tual sean Ai _ _ anned Atnal ostiaenaJParameters Controller. PAR Lower imt 23496 3496 LowerLinmit 1160 14i0 BeamnDirection: DnRUp Scan: Boom Pivot upper Uit 24522 [24522 Upper Limit 3662 3000 -rannnhdeer Size: .oo ineI-n. Boo Reim Inreet Intrva 54 DC( 3 Ccde a6 f terlVp. 10 Mode: Automatic Scan ConvemsionCeuats 100 Conversion Counts 100 NumberodScan, 20 SeanMotion: Ui-directional CenyusionUaits Degrees Conversion Units Degrei ReadRotakePonitle: 0.00 Co ne Dcfult RaduuLo. U8.19 Radias In. 88.19 (Poino(rivotPoint) 324.05 ModulePaaeter: 07A Cal 13 Calibration Records: IExunthastionNoles: En 0An Bo*a AMt -atiiDif fe _. ao-n 0.t a ".^. Ch-t fc.. ..  : .. .. ,-.d. ; _ r-. -

ChannelnI On 55 ) - 1.4in) 1.35(in) 0101301 instrumentation tubes.

Channei2 _On , 55 - 1+L + J.4in ) 1.35[in) 001302 0 Chacnel 3 On SIC40 t-l - 2.00(in) +1.72(in) 0801303 Channel 4 On SLIC 40 (+) + 2.00(in) 1.7Z(ml 0801304 Examination Ranarkas:

Channel5 <)n OL (+ +0.00(in) +1.72(;D 0801305 Limited umnlnadsonduetodeproxlimiyoftheoxebarrel Channel 6 Off N/A N/A N/A N/A NMA tati-rotation 11g1and tFz lover head instrioation tube& CD, 0 Channel 7 Off N/A N/A WA N/A NMA CirnelS otr N/A N/A NA IVA Nl/A _ -Cr9 Increment & Sean Positimns Aetual Rcrddabl Indicatlon Ansalyst Remarks Scan No(s)

Inereta Sta Position Stop Scan [onition Start Stop Chauc 10 0 Yes No E-N/A

Attachment:

0 O Yes No rj3C I -20 23495 2452t 14U1 2999 Charmed2 U RF U Further Evaluatica Channel 3 0 0 Required:

_. Cneh el4 0 El 0 EYcs E No

_ __ _ u~L!elS 0 3 _ Arlive TapeXCD o.:

4.__ afnelS6 0 0 01 I A/IR C of_7 0 n 2 Als'nis T 9e,,CD No.:

_ _ Delo 0 C El NiA Analyat ISNT Le'el/ Date:

nw6iar urn tst2rrouti rrrss tiiS

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME) inservice Inspection Program Request for Relief 1-ISI-18 Attachments Exam Number exam 13 Page l of I to Watts Bar Unit 1 RPV-W02-E LWR Id Meridional 0 240 Deg Cursor Box 1 of 1 Scan Axis 14.71 - 15.64 Inc. Axis 239.48 - 244.34 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 240.43 - 245.27 Scan Axis 17.63 - 18.56 Channel I Feature Analysis Sunmary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 240.43 - 245.27 Scan Axis 11.78 - 12.71 Channel 3 Module Coordinates Inc. Axis 238.26 - 243.08 Scan Axis 17.21 - 18.14 Channel 4 Module Coordinates Inc. Axis 238.26 - 243.08 Scan Axis 12.20 - 13.13 Channel 5 Module Coordinates Inc. Axis 238.26 - 243.08 Scan Axis 14.72 - 15.65 tl, keys 4.e&'1 2ZT /0 .',vt zovj-E3A-24

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD

.sI#.nss.. . or.n. R V

P-4 Mt.

(" rW.'1'4 ID' 1< 24U I M-4-V-6-11-e..tnn WAT-WATCOn.000 14 nelv I - w ------ - ___ __

  • Time 17507 Mnd lC9t A- Ik -.H fl.-! VPkd.AA V-sn. n.te Surfce Temperature'l L I Data Acquisition Operator (s) I SNT Level: David IL Kl~einjos / R Start End I tat IJ Fad l0Maxdx 2005 CD 1739 I Scan Coatroller Parameters lacrewneat As Plfuned _ Actual Scas Ais M

.ianUed I Actal oslitienol Puraceters Controller: PaR Lower Limit 1160 l 153S Lower lint Beam Direction: Cwv/Cc Scan: Doom Rotate JPPe1 Limit 3698 1 3701 Transducer Size 1.00 Incement Boom PiVot k==Ct bervel 54 DCI 3 Code % ofOverlep: I1 mode: Autranatic Sca Conversion counts 100 Conversion Cauns 100 Number of SaS 4R ScanMotion: Si-dircetional Conversion Uimts Decrees Convcrsionn Uits Drgrecs HeadRout. rt'ssito 90.0D Cr--!n Dehit tt IQ P.MAt,. T. 81.19 Hoist (Pivot Point): 324.05 Module Parameters: 07B Cal 13 Calmbatie. R;odw tic Status Asile Direction Scan Offset Step Offset I WAT-13 If is due to the proximity of the lower head rmel I On 55 (^) + I.40(tn) - 1.35(i) 0801301 instrumentaliontubes.

Cbunnd 2 On 55 (-) - 1.40m) - 1.35(in) 0RD1302 0M 1

mnaue 3 On SUC40 (+3 +2.00(ir) + L72(in) 0t01303 Channd 4 On SLIC 40 (-) -2.00(im) + 1.72(in) 0801304 Ersnmmatls Remnerits:

zhewuel S On OL (-I + 0.0(i) 41 .72(in) 0801305 limited cxsmination due to the proxiniity ofthe cre banred Cannwl 6 Off N/A IC/A NA N/A N/A anti-rotation luxp and the lower head instrunentation tubea. r0 CD Channel 7 Off N/A IVA N/A N/A NIA ChannSel Off 'WA NC/A NJA NMA N/A CD4 lucrmeraot & San Positios Actual Recerdable Ildications _Any R*marks Scan No (s) InorermcntPosition ScmaPraitiom Yes No NVA Alttchment:

____ Slasi Stop Start St Csa l 03 a a Yea la NO 8-37 1538 3101 22986 25014 Chtnnel2 0 fd 0 artther altutin 38-48 _ 3158 _701 23568 25014 isnneJ O Ela E Required:

CDel Chn_ 4 O [a 0 ° Yes2 1 No Ihal

_a_ Cbdn a o Archive Tspc/CD)1o.:

_lmel6 0 0 la 2A/B

:- Channel 7 0 -l Anlysis Tape/CD No.:

t__ ChanneltS aQ oA N/A Analyst/ SNTI evel/Datt ,; I

{6 ///INws,*2&4e?)J' uwtsron". ur5s tv-9.5smr

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-4SI-18 Attachments Exam Number 14 Page 1 of. I Watts Bar Unit 1 ZPV-W02-9 LWR ED Meridional @ 240 Deq Cursor Box 1 of 1 Scan Axis 234.13 - 235.06 Inc. Axis 14.67 - 19.53 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 26.18 - 31.01 Scan Axis 231.21 - 232.14 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 26.18 - 31.01 Scan Axis 237.06 - 237.99 Channel 3 Module Coordinates Inc. Axis Scan Axis 231.63 - 232.56 Channel 4 Module Coordinates Inc. Axis Scan Axis 236.64 - 237.57 Channel 5 Module Coordinates Inc. Axis Scan Axis 234.12 - 235.05 1CgA.C M // ",gg zooj-E3A-26

ISwT Examination Summary Record PMI.c d  : ,3e 30 at M.:

368 Watts Bar Nuwiear Plant Unk 1 13300012 Examinnion Aea: Reactor PressureVessel UnelAssemblr:

Identification:

NDE Lower Head Meridlonal Weld W2F Lower Head at 300degrees Pmcdue Ere R T

0 E

Alilb An etrl Recor CNF t

RfJChaCN NAseedy) Exm An L.. a AUW lSwT4-DIAUT/OO Sler AMO . AUIO tor0sthdess eesrv tny.

ICN2 1i AUTSUC49 X - VM Exrrabw lruWbod due e s bre suppoatbgesard 15 la AUTS5 X - VM be bvr head peraaoft IS AuT LuC4r x - Vl 15 AUrT55T X - VM 9.

CD A, CA- C

' fi oat,: Pagm: iiu e ryNo:

12-Mar-05 I OF1 300C12

, I U

tMI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitvdtat: WattBar Wed Mdcg olw RPV-W02-F PrelvtChgltCN: ISwT-PDI-AUTI/Cj0/1&2 Examination?. 15 roject No.: 04-0368 WddDeaerptims: Lva HdMridional 3 Devicetufizrratie.: WAT-WALCON0001__

Mad-CatE 07A S" rPath rswla . SPMeeid Exam Date Aariatiinas Tiem Surfe.Temprratr, F Data AcquhitdiOeOrator (s)1Si Lefel: CarlestBarrera/m I il0M 20QU

= Strt I a 1507 152J 7S 1 78 Scan:

Sesa Contr.iler araoaetaers .etAtild Controler PAr Boom Piovt LowuerLinit Uparlimit

=

294 h Actual 29496 30522 scao Axi LowerLimit upLimit Pletaed 1160 3662 Actuad 14t0 3000 Positionall Paranetas Bam Direction:

1ansduccrSize:

Dn/Up 1.00 I.

Inerenent Boom Rotateb Inremi Interval 54 Mcder Automatic Scan CORTvrMn,Counts 100 Converion Counus 10t0 CodeofOeertap:

Number offScans.

I0 20 I

ScanMotion: Bi-directional Convaseion Units Degrees CoDversion UtniLt Netrees Headttotate Prticow: O00 Couection: Derault Radiusin. 88. In R SlllristQ'ivoptlohl): N'A Module Param-aerse R7A Cal 13 Calihtatiou Recards: dsuArnualionNetes:

Status Aele Direction ssm Offetw Sten Offset _ _WAT-13 _ IChhck forlimitations due to the reximlit of the lower head riinetl- -On 55, (-)- - 140(i ) - ) , -- - ObO1301 insthiunienta__6on iibeies Chvanne2 On 55 (+} + 1.40(in) -1.3Xin) 0S01302 9 Chuannel 3 OD SLIC 40 (- 2.00(inl + i72(la) W 0b01303 Chmnel 4 Oe SLIC40 +200(iiti 2a + 1.72kab ____ 0t01304 __ naatiansResraar. El CD Channel 5 OR OL1 (+ + ° 0°(in) + I 72(in) 090 1305 Liruited cuisination. due to tbheproxmeityiof the cmc barl Cma 6 Off MA^ M.A N/A NA N/A andi-rotationl lupsond thc lower head irnstrUrmCtstiort wtbe 1.0 CA Cb__ 7_ Off N _A N/A NiA 0IA N/A _

Channtd S f IA NA NIAt N/A N/A Incnre t A Scan Paiton Aetal R~erdable Indicatlew Axal,3t Beormak SCL nNo-3 1crecttposition ScanPosiwoii _ Yes No N/AlAttachment

-St~ Str SaiW I _SloP Clum.( t d( i2L_ lf O Yes glNo __ _ _ _ _ __ _ _ _ _

1-20 29490 30529 14n8 2999 Chonnd2 0 Ei El I'udt)lcE,.luatio*

Chaum: 3 0 Ei O Resp4red; Channcl 4 0 El LI El Yrs El No ChannelS 0 W El ArchireTei'(1c'ha.~:

-Cannel 60 11 0g IAht

= _ =Chalfte 7 0 0 El Atis 'l apDe-CtNio.

I _ Cblumel 2a0 Wi3 A"dSPIT LenitllI S Date l 7 / x"/0ei-aus ua)O.

St ai9i_.Wes

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Ihspection Program Request for Relief 1-ISI-18 Attachments Exam Number 15 Page I of I Ai Watts Bar Unit 1 RPV-W02-F LWR Rd Meridional @ 300 Deg Cursor Box 1 of 1 Scan Axis 12.34 - 13.27 Inc. Axis 299.48 - 304.34 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 300.45 - 305.28.

Scan Axis 15.26 - 16.19 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 300.45 - 305.28 Scan Axis 9.41 - 10.34 Channel 3 Module Coordinates Inc. Axis 298.28 - 303.06 Scan Axis 14.84 - 15.77 Channel 4 Module Coordinates Inc. Axis 298.28 - 303.06 Scan Axis 9.83 - 10.76 Channel 5 Module Coordinates Inc. Axis 298.28 - 303.06 Scan Axis 12.35 - 13.28 boAVrn. _zzz

/OAop z&fXbOj-E3A-29

1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Slte/Pla*t: Watts Bar Weld Identificesona: RPV-WO2-F Proi/Rev/Cbg4CN: BwT-PDI-AUTI//00/1&2 _zminatim No. id Project N.: 04-0361 1Wed4 Dseriptie: L-wrlHdMIrvidic/R 3( Devke Ceflr uratiti WAT-WALCON-00 l n ModComL: 0781 IScas Pt Drawim: SPMatid r un Dote I Examinat'iaion c __TSe rfaca Tomerature h F Data Acquistt Operator (m)ISNT level: navid Iti leiljan I1 I0Maruc 2005 Str 7S175 F Scam ControllerParsaeters locremsentAxl, Plagued Actual Sam Axh

- Planned Actual ptsitloajl Parmete Cmetrollcr POR LowerLimit 1160 1552 Lower lmit 28986 28986 Beam DIection: 'C/Ccw Scan: BoomaRote Up Limit 3698 3699 UpperLiiut 31014 31014 rTuwduccrSiz: 1.00 Jaerteacat: Boom Pivot ITcrement hterwal 54 DCI 3 Code %of Overlap: 10 Mode: Automatic Scan Comnerion Cwosb 100 Conversior Comts 1o0n Numbernof Scat 48 ScanMotion: Bi-diredelonal CcnatersioUrnits Dere CombersionUnits Degroe Head Rltectl'eati* 90.00 ~. .

Correaion: DdiUlt Radius In. 18.19 Radius hL 8I.19 Hoist (Pivot Point): N/A 0  :-

Module Paranmters: 07B Cal 13 Calibration Records: Examwlnaloe Notes:

Status Amok Direction Scan Offset Step Offtet WAT13 Check for limitalions due to the proximity of the lower head us -,

Channel I On 55 (+) + .i40m) 1.35(in) 0801301 instrumentationlubes.

hanuebl2 On 55 -) 40(in) 1.35(in) 0801302 Channel 3 On SUC 40 (+) + 2.00(M) + I.72(in) 0801303

)0Q Chaonncl4 On SUC40 ) ._ - 2.00(in) + 1.72(in) _ 0801304 Exemlnmtio tRemarksm Channect5 On OL (+) + 0.Din) + I 72(in) 0801305 Limitd em in de to the Roxity of the core bante Channel 6 Off N/A N/A N/A NVA S/A anti-rotation luss and the lower head instrumntation tbes.

Channel 7 Of1 N/A N/A N/A NtA N_A 9 -4 MP On" channel S Off NA NtA N NA N/A w ;*,On f Iacrement & Scam Psaltloms Actual Ricordable ladleatloas Analyst Rsuarbs CD T1 Scan No.(a) Incremmit Position Scan Psition Yes No NtA

Attachment:

Start ShOD Storl StOp Chanel O3 0 0 Yes GA No S - 39 1552 3209 28986 31014 omwnel2 0 F5 0 Forer Evehtion 40 - 42 3273 3378 28986 30342 Channel 3 0 E 0 Rcqmired 43 - 4 3425 13698- 29769 30342 Chane) 4 0 a 0l 0C Yes Ql No cjamad s 0 0 La A iduevTape/CDNo.:

-Channel 7 0 0 G3 AnsyisTape/CDNo.:

Aalyst / SN1 Level I Date: _

1 ORM WCOCO ee1-0541)

U14.

Enclosure 3 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-1SI-18 Attachments Page 1 of 2 Exam Number 16 Watts Bar Unit 1 RPV-W02-F LWR HD Meridional @ 300 Deg Cursor BOx 1 of 1 Scan AXiS 294.13 - 295.06 Inc. Axis 21.52 - 26.38 Depth In Material 2.29 - 2.94 Channel 1 Module Coordinates Inc. Axis 26.20 - 31.01 Scan Axis 291.21 - 292.14 Channel 1 Feature Analysis Summary Comments No Recordable Indications channels 1, 2, 3, 4, and 5.

Channel 2 Module Coordinates Inc. Axis 26.20 - 31.01 Scan Axis 297.06 - 297.99 Channel 3 Module Coordinates Inc. Axis 24.04 - 28.85 Scan Axis 291.63 - 292.56 Channel 4 Module Coordinates Inc. Axis 24.04 - 28.85 Scan Axis 296.64 - 297.57 iS I .

Channel 5 . .

Module Coordinates i' 4 i i ,

Inc. Axis 24.04 - 28.85 p I Scan Axis 294.12 - 295.05 ' i .

40rV- t .7 // ~4q7~tc 2i'aj -.

E3A-31

ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF l-ISI-19 Summary:

Due to design configuration of the reactor vessel outlet nozzles, volumetric examination of the outlet nozzle-to-vessel welds during the Unit 1 Cycle 6 Refueling Outage resulted in less than essentially 100 percent of ASME code coverage being achieved. The design configuration of the outlet nozzle integral extension interferes with performance of an ultrasonic scan from the integral extension side of the nozzle to vessel weld, thus preventing essentially 100 percent examination of the required full volume. Volumetric examination of this component is required in accordance with ASME Section XI Table IWB-*2500-1, Examination Category B-D, Item Number B3.90. The full volume weld examination requirement is illustrated by ASME Section XI Figure IWB-2500-7 (b).

An ultrasonic examination was performed on accessible areas to the maximum extent practical, given the physical limitations of the outlet nozzle-to-vessel welds. The design configuration limits the best effort ultrasonic examination to approximately 76 percent of the required volume of each of the outlet nozzle-to-vessel welds. The volumetric examinations resulted in no recordable indications for nozzles N-15, N-16 and N-17. Two code allowable indications were recorded for nozzle N-18. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the outlet nozzle-to-vessel welds.

In accordance with 10 CFR 50.55a(g)(5)(iii), relief is requested from the extent of examination requiremeni due to physical restrictions. Relief is requested from these examinations because the code requirement is impractical to implement.

System/Component(s) for Which Relief is Requested:

e Code Class 1 Reactor Pressure Vessel Outlet Nozzle-to-Vessel Welds.

e Weld Identifiers: N15, N16, N17, and N18.

Reference ISI Drawing ISI-0427-C-01 and ISI-0427-C-06.

E4-1

ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 Code Requirement:

WBN's Code of Record is ASME Section XI, 1989 Edition. ASME Section XI, 1989 Edition, Table IWB-2500-1, Examination Category B-D, Item Number B3.90, Reactor Vessel Nozzle-to-Vessel Welds, examination requirement as defined by Figure IWB-2500-7(b).

Code Requirements from Which Relief is Requested:

Relief is requested from performing the required volumetric examination on essentially 100 percent of the reactor vessel outlet nozzle-to-vessel welds.

Basis for Relief:

The design configuration of the reactor vessel outlet nozzles precludes a volumetric examination from the vessel shell of the required volume for the outlet nozzle-to-vessel Welds N15, N16, N17, and N18. The configuration limits the volumetric examination of the code required examination volume to 76 percent. Reference Enclosure 5, Examination Area Coverage Report for Watts Bar Nuclear Plant, for vendor discussion of examination coverage calculation.

Alternative Examinations:

In lieu of the code required 100 percent volumetric examination, an ultrasonic examination was performed on accessible areas to the maximum extent practical given the physical limitations of the outlet nozzle-to-vessel welds.

Refer to Enclosure 4 Attachments for the examination data reports.

Justification for the Granting of Relief:

The design configuration of the reactor vessel outlet nozzles precludes ultrasonic examination of essentially 100 percent of the outlet nozzle-to-vessel welds. The nozzle-to-vessel weld examinations were performed using automated ultrasonic (AUT) scanning equipment and AUT'data recording/analysis systems.

The target scope of the examinations included 100 percent of the accessible weld. The examination coverage requirements for the nozzle-to-vessel welds are discussed in Enclosure 5.

E4-2

ENCLOSURE 4 TENNESSEE VALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF I-ISI-19 Examination of the nozzle-to-vessel welds is obstructed by the outlet nozzle integral extension. The design configuration allows for ultrasonic examination of approximately 76 percent of the required volume.

The ASME Section XI code requirements for reflectors oriented parallel and transverse to the weld stipulate that the angle beam search units shall be aimed, with the search unit manipulated, so that the ultrasonic beams pass throughout the entire volume of weld metal. The required examination volume A-B-C-D-E-F-G-H-I is depicted on ASME Section XI Figure IWB-2500-7(b). The outlet nozzle integral extension limits two-direction transverse coverage from the integral extension side of the nozzle-to-vessel weld. The integral extension restricts the ultrasonic search unit scan surface.

In order to examine the outlet nozzle-to-vessel welds in accordance with the code requirement, the nozzles would require extensive modificELtion. This modification would be impractical to implement. Other examination techniques were also determined to be impractical for this configuration. Due to the design configuration of the outlet nozzle-to-vessel welds, ultrasonic examination from the inside surface of the vessel provides more coverage than ultrasonic examination from the outside surface where the outside surface has limited access. Use of AUT equipment from the inside surface reduces personnel radiation exposure The outlet nozzle-to-vessel welds received 100 percent two-direction parallel coverage and 100 percent two-direction transverse coverage from the shell side of the nozzle-to-vessel weld with the sound beam directed toward the weld.

Limited two-direction transverse scans were performed from the integral extension side. A one-direction parallel examination was also performed from the nozzle bore resulting in 100 percent coverage. The results of these examinations recorded no reportable indications in Welds N-15, N-16 and N-17. Two code allowable indications were recorded in Weld N-18. The best effort ultrasonic examination provides reasonable assurance of an acceptable level of quality and safety. The information and data obtained from the volume examined provides sufficient information to judge the overall integrity of the outlet nozzle-to-vessel welds.

E4-3

ENCLOSURE 4 TENNESSEE VIALLEY AUTHORITY WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 Conformance with the referenced code requirement is impractical, therefore, this request for relief is submitted pursuant to 10CFR 50.55a(g)(5)(iii).

Implementation Schedule:

This request for relief is applicable to WBN's first 10-year inspection interval which began May 27, 1996 and ends December 26, 2006.

E4-4

ENCLOSURE 4 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

FIRST 10-YEAR INTERVAL INSERVICE INSPECTION (ISI) INTERVAL REQUEST FOR RELIEF 1-ISI-19 ATTACHMENTS

1. Examination Data Sheets for Weld N-15 Pg E4A-2
2. Examination Data Sheets for Weld N-16 Pg E4A-13
3. Examination Data Sheets for Weld N-17 Pg E4A-24
4. Examination Data Sheets for Weld N-18 Pg E4A-35 E4A-1

ISwT Examination Summary Record Proct Mo: Slb: SUl_1 Sheet Ne:

368 Watts Bar Nuclear Plant Unit 1 300I20 Examination Area: Reactor Pressure Vesse LlnalAssembly: Nozzl to She Weld N-15 0 ldeutlcaTion;Outet Nozzle at 338-degrees T NIH NDE Pnxedmut Exem R E R.ohAion CNF 8yhosAN hLmbf Eangle L B An brt R, Ri.d NoRe.

AUT ISWT.POAUT1MM 10S AUTO - AUTOfcr&Ilehkn~meaWaU10y*. E=akM§.W IC" 2 100 AUTSUC40 X _ Ca p...d fr d o were aKmwbd do to nrtozd 1BS ALIT SLIC40T X - CB Integiexdel 105 AUT55T X . CB tSWr-FVI-AIT4IW 99-104 AUT PAlS X . CB Exradona Opefled"omnoaee bore.

CO0 0 5

~ri Oqrod r /i. /1 P

4 {

t te:

13-Mar-5 Pxge OF 1F IS3moory No:

1300020 I V f'4f-

11111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SiteFhlant Wats Bar MWeldtdifflcatlon:FPV-N15 Prau/Rev/ChgJICrl lSwT-PDI-AUT4/0 ExamiationNo_ J9 "reJedN.: 040368 WldDeacription: fhaNn-Io 3*-(56' DeecC eration: WAT-NO7CON.000l Mod-Cos: 30 Sn Path Drawi. SPNOZOUT Exam Date i Examinatlon Time Sura Ter tuwc!

Pita Acquisiti. Operator (s) I SNT Level: Jets R. Delgado I/H Alan Scsaefer I NIA 0B Mar& 2005 204 l 2100 76 nd Data Acquisition Scan Controller Paramnet IncrementAxis PlIeaned Actual Sm Asia Planned Actual P1'eitioaa Paraneters Controller PaR Lowerlimit 85.42 85.42 LowerLiUit 5.00 5.00 BeamDiecti.n Twd Scan: HeadRotate Upp Linit 107.42 l 107.42 Inpperliit 65.00 65.00 TransducerSize: 22mm x45mrn lcrnent Boom Extend ncIentnterval 1.00 Resolution 0.20 Co&%of Overlap: N/A Modc Antoomtaic Scan Corversion Counts 100 ConverionCounts 100 NunmberofScmnr. 23 Scan Moliw Bi-directional ConversionUnits Inches Coversion Units Degrees BoamSotatePosiutia 358.00

'.4 O Corrections Default Ra10ln 14.50 Hoist @ Nozzle C& 83.95

___ arenmret 30 Caua2sc1rdabxd cimiTatioiNt tes.

Sbw

.e De._O: !rr WAT-70!t Chandno i On_ PAL () + 90.0(den) e 000(ini 1200201 1hz2 552 On PA16. . + 96.00n(deg) + 000(in) 1200201 Cael 3 oa N/A NIA 0/A IVA NIA Chsnn l4 Off N1A N/A N/A N/A N/A KianationRemarks4 Cannl 5 Off NIA NM 'N/A N/A _ NIA CDInnel6 Off N0A /A MA NA N/A t1:,,

Cd7 Off N/A N/A N/A NtA N/A Chne Off N/A iN/A N/A N/A. N/A DQt - Analysis Inrertent &Sm Postions Actual Record ble Indications lAnslytRelarims ScamN .(s)

O.

incr~em SWr Position T Star sca. tioshon Yes No N/A lAttachment stop _Stop_ al1m YeS 13 NO El}§7 1-23 S5.42 107i42 5.00 65.00 Clal 2 0 l Furthrkyaluxtin Chnn_ 3_ El o__ R__

_ire2 Channel 4 0 Fi El n Yes o1 No t 5andO D e C TV3 No.:

= Cluanel 6 0LIEl lChmid7 El 0 ElAayiTope/C1wo.

. _ _ _ Channel ii O i)

Analyst/ SKTLevelDklCI Dale:

e.~ ai .. e Il*OIt f~rARA 10=- UTM (M-..sm \.- I -

IEII SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant: Walls Bar lWeld ntlfil on: RPV-N15 Pro/Re)Ck (CN: JSwT-PDI-AUT4,)0 EamitioaN.:

Fx J00 PrJNa.-te 04.36*WNdw Project 04-0364 lWld Description.

cion Ol-z~et32-1:

o~skwh SW33W164 ol.C*kCoS 8 a Wigurstiow; WAX-NOZCON-0001 Mo&Coat: 30 lScaursthBral SPFNOZOLtT ExnoDate Examhiatio TIme Surface TeMature IF Date Acquisition Operator (a)ISNT Level: JenaRLDelgadoIlt Alsn Scuaeferl lA 08 Mard.2005 S1at11 Ed Sjbrt L End Data Acquisition Scan ControllarParametrs laceamentAls Planed Actual Scan Axis pinnatd Actual Positionl Paraseters Controller: PaR Lowerlimt S5.42 85.42 Lowerlimit 64.00 64.00 Bean Directiow Twd Sccn HoodRotate Upr Lit 107.42 10741 UperLimit 125.04 125.04 Trraoducer Siz.: 22mm x45mm Inctroan: BwoomExtend lnereaat Interval 1.00 Resolution 0.20 Code %of Overlap: N/A Mode: Auteastic Sen CoVervsiW cDnMts 100 Conversin.Counls 100 , Number of Ses: 23 00, MauMotiQ Bi-direriioni Conversion unils Indchs Cnnvesion Uits Degre IBoot Rotae Position 358100 Corecstion: Delault Radius ln. 14.50 IHoist 'Nozzle C/L 83.98 Model.Paranaters: 30 Cal 201 Calibration Records: IExamninationNotem SAbt. 0.. f. orr. wT2 W l I.

Chwmnd I On PA16-L () + 90.00(deg) 4. OOO('m) _120020t U nn ce2 Un PAn6-S 1 + 90r00( +rlce) _ 12A0201

__(in) rA0 Channel 4 Of N A N/A N/A N/A2E ieoerrs Channel O /A NtA }ICA 0A Ne A Channel 6 0/T NM N/A NA N/A MA CD20 CCannelt7 Off A NM N/ACNoA N/A d a Off N/A MIA NMA NnA N/A Data Antbsly lncea nt & Seon Positiont Artual Rtecordable Indicatiensl AnalystRemar Scn " ncls) Position Sew FPosition Yes No N/A Afshet I/

Ss s o tat Sto Sg Stop amautue I 0 El O 0 Yes 13 No 1-23 S5.42 It)7.42 64WM 12504 Cbu nac1 n , o Futer Evaluain

-Channel 4 0 1 Yes 13 No _

Cbannel 5 0 El hd~e m DNo.:

.Ch nnel 6 El 0 93 _

lChanncl7 0 0 ED 4nalysisT etCDNo.:

=t _Chosanl S 0 r" El t3 Analst / SNT 4ylIDate: . (° s / j' ttar z7M zo O S-1sewryofati. VlT" (r..fw) N- I xJ

]HI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Siteflinat: Waft3Bar Weld Ideatiftcatiot. RPV-NI1 5re/ReviCbVIC1¶: ISwT-PDI-AJrT4/0/0 ExaminationN..: 101 Projectn.: 04036S WaIdDescriptona: omNoz-oS6433r(l24-1 DevicoCeonfianmt: WAT-NOZCON-0001 Med.CnL- 30 [Se9D PsthSDrawtnt: SYNOZOUI Foran-Dae b Erlmnntion 3 SorbzeeTemperature F Dit Aequlsitton Operator (s)ISNIT Level: JeaseIL Delpob/ll Al-nSchaeferIN/A l S 2119 2ad1 Start i 7d I

219 2131766 Data Acquisitiona Sea Centroller Paa-neters IncremeetAals Planned _ Actua Scan Axis Planned Actual PositionalParameters Controller PaR owerLinik S5.42 85.42 LowerLimit 124.00 124.00 Beam Direction: Tid Scon: Heed Rota Uper Limit 107.42 107.42 UpperLimit 185.04 105.04 TrarSduc ize: 22mm x45nmu Incremnto Room Extend Innetment Intcrvjl 1.00 Rolution 0.20 Code%ofOverlap: N/A Mode: AutomaticScan ConveesionCounts 100 Coversion Counts 100 Numaber of Scans: 23 SanMotion. li-directinmdl Conversion~lits Inchs ConversioniUnits Degrees BnoomRotate Position: 35C00 onD CD COleolOD Deault IRadius in. 14.50 Hloist Nozzle C/IL: 83.9i Modal.rameter. 30 Calt01 Clot liuta Records: lEzanlntio Notes:

Si iuS Angie iricese San (set SO,. _:,_.-'.0: ~ -

Channel I On PA16-i (-I + 90.00(deg) + Q00(in) 1200201 Uinnel 2 On PA16-S ( 1 90. 00(e + 0.0iin) 1200201 Channel 3 Off N/A N/A N/A N/A N/A Chaunel 4 Off N/A N/A N/A N/A N/A ExainatioaRmanrls:

Channel 5 Off N/A N/A N/A N/A N/A Channel 6 Off N/A N/A N/A N/A N/A _ U, -

Channel 7 Off N/A N/A N/A NIA N/A Channtl i Off N/A N/A N/A /A NMA Data Analysis Incaenent & Scan P"tioneActual Recordable Indicatonyit Remr ScanNots) Increment Position Scan Position Yes No N/A Atadtment:

Sr rt Stov Stat Stop Channl I 0 E 0 OYes Z! No 1-23 85.4Z 102.42 12400 105.04 Channel2 0 Euzthce

.' 0 rEvaluation

__ _ _Channel 3 0) P1 lRequired: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Cu Ch anael 0E l O Yes 0 No Channel 50 0 2 Archive Tpe/CD No.:

6 0 C__ _ _ _el 0 ID J _

__ _ __ __ _ _ _ __ _Channel 7 01 0 Elpc/c n ly t DN o.: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

____ ChannelS L E _l Analys NT Level/Date:

0 -/. .cAzo)s INCAS4 ufTs VS.MM I l

__ H SOUTHWEST TECHNOLOGIES ITL-c AUTOMATED UILTRASONIC EXAMINATION RECORD SltePit WasBar Weld Identifiation: RPV-N1 5 rr1Rov/ChzffCR: ISwT-PDI-AUT4OA)/0 ExsmilHtlo - 102 Preoct No.: 04-0368 Weld Deript ion: atNie- h 338e(3W 4'-2 Device Configaron: WAT-NOZCWON-001 Mod .n 3ti Sesn? teDmrrwing- SiNOZOtiT i1Do Date Ermn Tinme Surfle elanperatetre IF Data Aequlsition Operator (s)ISNT Level: JesseRLDelgadolIl Alto Schaefer NlA j 20t 2St" rt St rt End Sees Controller Parameters Cootroller PaR n weremeotAxis LowerLimit Plaumed 85.42 Data Acquisition Actual 5.42 Scan Axis Lower Limit Planned 184.00 Adcal 184.00 Positional Parameters Scar Dreio Twd CD Scan: Head Rotate Upper iUmit 10742 10742 Upper Limit 245.04 245.04 Tsinsducer Size: 22mma x45mm Incremeat: Boom Extend incrtmentlntcryai 1.00 ReSoD , 0.20 Code % of Oveap: NIA Mode: Automatic Scan C0BrefSiSUnCounts 100 NumberofScas: 23 Scan Motionr. i-directional ConversionUnits ncises ConvetijonUits Degrees BoumnalatePosition: 358.00 Cd R' 0nt Correction: Deailt Radiu in - 14.50 Hoist A Nozzle CIL D C Moduleamters 30 Cal 201 Calibration Records: lExanstuaton Notes:

Slatas Aurd Directio Eean Sees f stc Offet -cWAi-2Ui Channel I On PAir-L h-) + 90.00(do) + 0.00to) 1200201 Channel2 O( PA16-S + 9Q00(dog)el_ + _____ 1200201 Channel 3 Off NiA N/A MA N/A N/A Channel 4 Off N/A N/A N/A N/A N/A Examination Remarks:

Chnnel 5 Off N;A NIA N/A N/A N/A Channel 6 OWI N/A N/A N/A N/A N/A ai 0 Channel 7 OH MA N/A N/A N1A N/A Chaonela Oif NIA N/A N/A N/A NIA I Data Anslyiso I-tm Increment &Sean Positions Actual Recordable ndications Analt Remarks In Positction I SCaDPosition Yes No NIA Anschmnt: rj3 C.

CD4 Scam Nol(s) Stety slDp Saart Stop CDateS:t El ° OYs r NO I- 23 85.42 107.42 l84.00 245.04 Chawe 2 0 Ei El Further 13valuation Chatine. 3 0I n GI Required:. on2

__Ch-nnel4 [I n la o Yes 13 No Channel,5 El El 0 AwCDive TVtC No.

_.Channel 6 0] 0 91 I 5 lChsnnd 7 [ 0 9E Analysis TyC No.

A bae 8 0 El. [E) hIA Analyst I SNT Level /Date: l7 0 1 /

15wrORJ f. U St1fp-. 60

_p 1111 SOUTHWEST TECHNOLOGIES ImAUTOMATED ULTRASONIC EXAMINATION RECORD __________

SitetPlant: WaffsBar IWed Identifleatlon: RfV-N15 - romfCebeCN: ISwT-PtD-AuT4,/ rxamination N.: 103 ProjectNo: 0440368 WddDeriptie. Oawnan-_9133t.3W44-5 DeviceCanftiratb: WAT-NOZCON-0001 Mod.Coaf. 30 Scan Pati Drawla r SPNOZOULT KIana Date I 1amrbatien Timaa rce Temperature *F Data Aqepisitlo O1erater (s3)t SNT Level Jess RtDdpgdo I II Aau Schaefer I N/A 0SMs 2005 2156 220St 7t'6776 i.

76 Dats Acquisition Scn Controller Paratneten hrensest Axis Plsmed l Actual Scan Axis Phoned l Actal Positional Paramebtrs Controller PaR towerLbtm 85.42 85.42 LowerLimit 244.0_ 24400 i~easuDarects Twd 22 Scna Head Rotate UolprLimit 107.42 10742 U-16Limit 305.04 305.04 Transducer Size rm, x 45nom Incremenet Doomrlxtend Ietnterval 1.00 lesohutios 0.20 Codc%oCOvedlp; NIA Mode, Autonatic Scn Ceonvession Counts 100 Conversion Cconts 100 NumberofScans: 23 Scan Motion: Bi-disctonsl Ceove3sionUdits Idnces Conversion Units Degrees BoomRobePcosiioa 35800 Corecin Defiult Radios In. 14.50 Hoit44NoxzleC/I. 8398 ModuleParmeter,! 30 Cot 101 Calibrato Records: JFxaminatiol Notea CannelI o tPA16-L ot Sca + 90o00idei) + 0 N00(n) 120t201 t*

C__ne,2 OS PA1 StS + 90S0t(attS C 0Cl0(1n 120C20N Chne 3 Off N/A NCA NIA NIA N/A _

Chnnet4 Oa_ N/A NIA NIA N/A 0 N/A ninstiox aorl: R2 Chunc__5 Off N_/A NaA NIA NIA NIA Cbanot 6 Off NIA N/A NCA N/A NIA Channel 7 Off N/A N/A NIA 7s NnA A a 8 Off NIA N/A NA NIA NtA Data Attdlysis Iner easa tSusrenFaits Acul Reevrdable lodientios Analyst Remarks Inac) nt Position Scan Position CD C Scan N Yes No NIA Attbchmeunt _

n0() StatW Stec Start lStop Channel I 0 m- 0 O Yes (3 No I - 23 o5542 1117.42 l;44.00 305.04 Channdl 2 0 1i 0 Yurther ibvalation

_Chatmel 3 0 0 El Reqdnred CD1 Channal 4 0 0 aw 11 Yes 13 No0 Cbtanels ° ° S3 ArhvcT"reCD Nu.

._Chane 7 Q _- 0_ 13 ayd w o O el Anale ad No.:4l Attstst I SNY I.velltDate: \- R - ~ 1

._ . eA 4 li~~~C- s E/o abrh2O wTio m..vT n M-ftst

IIMI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitefPlait! Wats Bar WWtidldentifiatioa: RPV-N15 Pro/Rey LCN: ISwT-PD1.AUT4AI/O/0 Txa0tutaN.: 104 Prolete Ne 04-0368 Weld Deseriptieo: 0o Se 53W 50t 3 Da C n rtio WAT-NOZCON-0001 _

Mod.CoaL: 30 =ScanPathDrawl.: SPNOZOIT Exam Date Examinatieo Tiae SurfaceTeeua re-F Data Acquisition Operator (s)I ENWT Lewd: JesseR.Delgado I l AlmaSchaefer INA 08 Morch 2005 Start End Start Z1 221 2123 76 1 76 Date Acquisition Scan ConftrelbrP araeeters lB"MeoxtArk Planned Actual Scan Axis Plagued Actual Positional Parameters Controlles PoR Lowerlimit 85.42 85.42 Lower Limit 304.00 l 304.00 Bem Direction: Twd Scan: eadRote Upper Limit 107.42 107.42 Limit 366.00 366.0D Transducer Size 22mm x 45mn CD0 Increment BoomExtend inerementlsterval 1.0D Resolutiot 0.20 Code %of Overlap: NA Modec Automatic Scan Conversion Counts 100 Conversion Courts 100 Nmber of Scsam 23 Scan Motion: Bl-directional Conversion Units inches Conversion Uits Degr soeaeRo ePi 35300 Correction: Default Reaips In 14.50 ioist t Nozzle C/L. Sg8 Module Parameters: 30 Cal 101 Calibation Records IMasunination Note:

Chanxel On PA16-L (-) + 90e00tdI dt f OOOn 12DC201 C2:1w]2 On PA16-S t-) f Yql)Obtd) +U.M0tb) 12WU201 Clusncl 3 Off N/A N/A NIA N/A N/A_

Chanel4 Off N/A W9A N/A N/A N/A Examl"Hton Remarks:

Channel 5 Otl NIA NIA NIA N/A N/A 01flnd, 6 Off N/A N/A1 N/A N/A NIA Chanel 7 Off N/A N/A NIA N/A _N/A Chanola a Off N/A N/A N/A N/A N/A wtevlrae Jl Stan Positions Actual Aubs/Increment p> orZ Recordable Indicains Dnbs Analtsbs ocr /Vji- cc_',,,-0 Analyst Remarks 0!0 Sa o( Inc Position Scan~oiin Yes No N/A Ataha nt:

SnNo()Strt- Stop Star Stop bin 1 0 El 0 Oyes il No 251 1-23 85.42 107.42 304.00 36 00 Ct d2 0 M7 0j Furdeir lvatnation __ _

Ctuno 0 3 0 E1Required:

Cannel4 '3 0

(R aYes ED No

=mu S OB 5rn O Archive TycCD No:

chlannel 6 0 n1 la c S.

lQhinae) 7 0 0 EQ 'AalysTpe No.

Analyst/ISNT Level/lDate: I , I 0 fchZ 0 1sWT70Pxx.l UTINM." An.) \

_, 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitalpIaat: WattsBar Weld Ideatmentian: RPV.Ni5 Pro/Rev/Chx/ICN ISwT -P AUTlOwl&2 Examinatio N 105 Pro act No.: 0440368 WeidDescrilptio: OutletNoz-to-Sh 3383 DtvteCaaflgrutin. WATWALCON-0001 ___ ___ ___r _ _S Mad.Coar: 09 Scan Pathbrawit: SPNO70tJT Exam Date Examkto Timuse 'Surfac Tern turer*

Data AcqWLitio Operator (a)/ SNrTLwe Carlesbarrera/llm KellyDaigleI/JVA 12-Mhr40 Start Fad Start End 1600 1610 70 7t Seanm

-Ceatrofler Pernmmetera Iderereat Axis Plamed Actual Sean Axis Flaned Actual Positional FPamaters Controller:

SCHC PaR Clrmimferential LwerLimit U crLimkit 2238 2958 =

260t 2972 Lower WmIt U_ erLimit 9000 9000 9000 9000 Beam Diretion:

Trtnsducer Sizn CAV/Ccw 1.00 g::i0 Increment Radial Incrnermt tlrval 90 DCI 7 Codea 9 of Ovart 10 Mode: Automnatic Scan Conversont Ceunts too Conversicon Count 100 Number of Sums: 9 ScanMotion: Bi-directional ConversionUnits Enche Contversico Units Degrees Head Roeae Patliont 0o00 on 0 0, Cxrertion _ _ __ _ _ _ __ RAdius Tn. t5A43 Hoist (Pivat POint): N/A Madulet arameters: 09 Cnl33 Calibradtio tReurds: Euaminatlm Notes:

C .m. Ao* i Dalroeo OScaonr. eRf.-nMY.i WAT-33 Check for limitations due to the proximity I coonfiuration ofthe Channel I On 55 - 7.53(i) 1.05(in) 0303301 outlet nozzle intl extension. 0. _

Channel 2 on 55 4 7.53(n) - 1.05(in) 003302 Channel 3 On SLIC 40 ( - 9.95(in) 2.87(in) 0803303 f 0r0 Channel 4 On SLtC 40 + + 9.95(in) 2.87(in 0803304 Exzanmnatia Remarks-Chansel 5 On OL (+ - 10.56(in) 1.22in) 0803305 No=zi Center [toist Position - 8398 (nel6 Off NtA NMA N/A NtA N(A Boom RotateNozzle Canter Position - 33s00 r I r Channel 7 O(f NtA NtA NtA NA N/A Limited examination due to the oximity of the outdet noznje Channel 8 Off NIA N/A N/A NIA MNA integra alexion -h K Incremnent S&%Sa P~sitioas Actual Recordable ladicatioug Analp Remarksa Scan No.(s) b Position I _on_ Yes, }Nto NIA Attedm E N Stout shi tart IpoSti Sto ChauuneW1 ~ 0 ff O 0Yes 2No 5-9 2596 2956 9_000 9W00 Clianndel2 Ci Ei Further Evaluation Channd 3 0 11 0 Required:

= Csnc ei4 Cha4_ 2 0 O Yes E No Chann5el 0 0 Ei Tape/CD No.:,

______ Channl 6 0 0 G 10AM Channei 7 0 0 2 Analysis TapelCD No:

_ Chaon nelBO 0 E N/A A IMrtSN 'L*VtI Dat: .,-r tmeeoa. N. \U

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-19 Attachments xam Number 105 Page I of 2 Watts Bar Unit 1 RPV-N15 Outlet Nozzle to Shell 0 336 Deg Cursor Box 1 of 1 Scan Axis 90.76 - 92.93 Inc. Axis 21.16 - 24.76 Depth In Material 6.63 - 7.79 Channel 1 Module Coordinates Inc. Axis 25.77 - 29.30 Scan Axis 102.18 - 104.35 Channel 2 Module Coordinates Inc. Axis 25.77 - 29.30 Scan Axis 79.36 - 81.53 Channel 3 Module Coordinates 27.53 -

Inc. Axis Scan Axis 101.13 - 103.30 Channel 4 Module Coordinates Inc. Axis 27.53 -

Scan AXiS 80.41 - 82.58 Channel 5 Module Coordinates Inc. Axis 25.77 - 29.30 Scan AXis 97.81 - :00.01 Channel 5 Feature Anialysis Summary l Comments No recordable indications chs 1, 2.

3, & 4.

I

,_j. if,(aA 20c E4A-10

AftmIIII SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/lieat: Wats Bar WeldIdei.ttification: RPV-NIS wJe/RevIChjiCN! lSwT-PDM-AUJT/O0/Il&2 Rxiamlasti. Na.: 1ed Pacet Na: 04-036e wel Deed p: Ouletl bNo-to-h 338 Tlviee Ceonfiiratios: WAT-WALCON-0DI_

Mod.CmL. O/A _Sea Patb Drawing: SPNOZiJUT Eso Dte Enuinattion Tim Surface Trnrentare F Data Acquisitiom Operatar (s) I SNT Level Stey Vloragndov/ N/A Kelly fluile I N/A 13-Mar05 SEnd Start End O0710 78 78 P.

SCAR Centrtiir PaMetetn lacreent Asia Planned AcA Stan Axls Pavnedi lstniA Pesitional araieters Controller PeR LowerLimit 500 5C0 LowerLimit 178 2226 Bean Directiown TwdiAny Scan Radial Up Lmit 36615 36615 UpperLimit 3310 I 3478 TtansducerSic 1.00 Increment Ccummfercenta Incrementinterval 155 Dod4 e%of(tJverlp: 10 Mod Atomatic Sn ConectnCoats too CnversionC ts to0 NWunber of Snem 234 SnMoioan Bi-dredoioal Ccnmesieon its Degees Coiiversion Uenits ths EmdRoo Position: 0.00 Corted. Detult _ aiues InL 8S.19 Hoist (Pivot Point): NtS Modual Parameters: OA Cal 34 Calibration Records: Examinato Notes-Status Annle Directian Sean Offiet Step Offset 'WAT-34 Ick e__Efrlxnmitatlow, du to the prmrimity/)etwfi ofthe Channel I Off N/A N/A NtA NtA N/A outlet nozzie intern! extension. 0~

Channel 2 Off NtA N/A, NA NtA NA Channel 3 On SLIC 40 -72

. n) + 2.OD(in) 0803403 Channel 4 On SUC 40 - 1.72 - 200(n_ 0803404 Examinlatin Remarks: Cl ChannelS On SIC40 + 1.72(in) + 0.0(a) 0S03405 NozzleCentetrHoist Psitiott-8398 Chaaneld6 Off N/A N/A NA N/A N'A Bo= Rotate NoozdeCenterPosition-33800 00 Chmnet7 OfL tiA N/A N/A N/A N/A Limited examintion. due to the proiit oftile outlet eaeint Off N/A NN/A A NIA WAce lnermneat & Sean Psitiott Actual Recordable Indications Analyst Remarks Scan No.(s) Inne Psition l Scan Psiton Yes No N/A

Attachment:

°4) SW Stop Star Ston Channel I 0 la a Yes (a No 1-233 500 36615 2226 3478 Chanel2 C] 0 [a Furthervaluatlito I _ Channcl 3 a 0l Required:

__ Channel4 0 la D 0 Yes El No Ci

. . channel 3_ 0 Axdlhve TapeCD Na:

.___E _aned6 l_(a__ 10 A/B _

A

_ _ canel 7 0 o 2 ralysis Tpe/CD No.: _

_Chnnoe S O 3 E N/AA Analyst/ SNTLeve Date: 13 ptn tKs ia:. tiat)'

lsr4a V 131MORIMN. UTr6 (.-c" I

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-4SI-19 Attachments

xam Number 106 Page 1 of 1 Watts Bar Unit 1 RPV-N15 Outlet Nozzle to Shell @ 338 Deg Cursor Box 1 of 1 Scan Axis 25.02 - 26.26 Inc. Axis 36.00 - 49.95 Dep
b In Material 1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis 35.49 - 49.45 Scan Axis 27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis 38.75 - 52.83 Scan Axis 27.94 - 29.18 Channel 5 Module Coordinates Inc. Axis 36.24 - S:.69 Scan Axis 25.54 - 26.78 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2.

& 3.

Reviewed By $ l) °'oJJ - SNT Level HiJ, Date 13 J cGo

rCA E4A-12

ISwT Examination Summary Record

.rojed No: Tsunr3ht No-Examination Ama: Reactor Pressure Vessel LlnelAssenbly: Nozzle to Shell Weld N-16 o Identiclatlom Outlet Nozzle at 2024dgrees T CD NOE Pnxndun Exam R E Re CtNFn Qw Nelh1d 1l.,Kh j l Nu neds Exinm b I L A nel Record t N2. R uema AU IwT-P.AUT1RYO el AUTO . . AUTbrothdcness measurmenwonly, Enae*atfs N 22 A8UTSM4Ao X CB1 pofSom t fnh %V53 d wese knied due b nonhe el AUTSUC40 X C8 leiegreiX.nn e . tZ S1 AUT55T X - CS t$WT-05A11T41a 75-SQ AUTPAIG X - co REr.hkot pedoeed! nof.5¶el boe CD o rM,,Z

  1. 9CD Prepoed ay: j n*

1.1: I a IS9_ynN.:M A d '

1 1-'r0 O° . 3017 4

4A

,db JU SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SilteJPht: WatfsBar weld Ideptilcatko: RPV-N16 Pr~Clkno; ISwT-PDI-AUT4/0/0/:

PrejecNle.: 04-0368 WYeldDofrptie: OiNoA 202f(5-45 DeviesConsllturatlba: WAT-NOZCONX-001 ___________ _75 Mod.ConsL 30 IScan Path Drawing: SPNOZOUT Exam Date lsad" Tae Meet SufacaTameratrF Data Acqnisition Operator (s)ISNT Level: Jesse L Dlgado, II Alan SchaeferINtA OS9rkZOO5 021t 02u4 1 0215 1 0224 76 1 76 Data Acquisition Scan Ceontroller Parameters Increment Ais PFamed Actual Scm Axis Pbnmned Actda] Positional parameters Controller PAR LowerLimit S5.42 85.42 LowerLimit 5.00 5.00 BeasDirectiom Twd Scan: Head Rotae Uper Limit 107.42 107.42 Upper Limit 65.00 65.00 Transducet Sie: 22mm x 45mmo Encremerut Boom Extend Incremant Inktnde 1.00 Rcsolution 0.20 Code %of Ovrlap NfA Mode: Automatic Scan Conversion Counts 100 Conversion Counts l00 Number of Scans: 23 Scan Motioen Bi-directional Conveesion Units Inches Conversion Units Degrees Doo Rotte Postionr 202.00 Counctium Default Radius IL. 14.50 Hoist G Noozzi CIL 83.98 Module Pwrametera: 30 Cal 201 Calibration Records: IEansleation Notes:

S:.Ar-t D~r~it can Oeffd t-O "74.,-2 Chnotl Ot PAA16-L + 90.00(do + 00.0in 1200201 Chanael 2 Os PA16-A N + 90."tdcg) + 0.00(1n) 1200201 Channed3 Off N/A N/A N/A N/A NtA Chanstl 4 Off N/A. N/A N/A N/A NMA Examination Remasrks: '4 0 Channdl 6 Off N/A N/A NtA N/A N/A Chansel 6 Off N/A N/A NtA N/A N/A Channel 7 Off N/A NtA NMA NMA NtA CharnloS Off N/A WA M/A N/A I N/A ________________

Datn Analysis c2,2 Increment & Sam Penitis Actual Recordable Indlestim _ __R_ A___ rks Scan No.(s) Incrntent Potition Scan Posiion Yes No N/A Atachment CD9'

_Statt _ Sbo S Stop stt Cholncl I O O0 Ycs E No 1-23 _85.42 107.42 5.00 65.00 Channel 2 0 E) 30 thiiertyvaluttion Ch Csnei3 [ o El RFeqetii Chumnel4 0 2El _ Yes O No Channec 5 0 0 E Archie T DNu IClhuel 6 El C) 03 8

_Channel 7 0 2 hab'sis A T No.:

______CiomndS 0 0 ID N Analyt / SNT [Aver/Dlte l\ IloA i 8 tO"WOS,". urnt 0' 50 I I

b 1111 SQUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Siteftat: WaftiBar Weld Identiflution: RPV-N16 Pro/ReviChg/CNK; ISv-PDM-AUT410/O1/0 Elantee Na. 76 ModCouL: 30 Scan Path Dinyr SPNOZOUT Exam Datl Eanotitem Time _ SurfaTeOe Teerature F Date Aeqalitis Operator ()/STLevel: JesseF Delgado/M Ala smhaefer/iN/A 0 02St9 l n s.tart FAd CD Dnta Acquliition Scn ControlleeParameters IncrenentAxi lanned Actual Sctan Axis Planned Actual PositionoalParaseters Controlier: PYR LowerLinit 35.42 S5.42 Lowerli-it 64.O 64.00 PCe= Direction: Twd Scnn: HeadRtalte Uppalimit 107.42 107.42 UppLimit 125.04 125.04 TransduerSize: 22mm x 45tm 0, Inczement BoomExtend bInc t INtteval 1.00 Resolution 0.2U Code% ofOverlap: N/A 0 Mode: Autonstic Seen Conversion Conts 100 Conversion Counts 100 Nwaber of Scaw. 23 CD ScanMotion B-dirootional Convesion Units Indies Convesion Units Degrees BoovsRsftPouinow. 202.00 Cunoetms: Defasult F IIL

_iu _ufist

_ 14_50 i Noric CtL. B3.98 0 C, ModulParameters 30 Cal 201 Cilbrtioonecords NxntoN titatn Angle Dpirection Seen Ofims' am Cairain eors 1 a-mn to Channenl Citanne2 CIen OSl SA16nL 1'A16-S P ti Sl _+

t 900tatdcb) 90.S den_ +0 Indictin) 0 1200201 s

1200201 o CD CO, ChCae3l 3 Off A NA N/A N/A e IA Cae 4 off N/A NIA N/A NiA IVA Examination Re0marke CD CD 0 Channe 5 Off N/A _ /A N0A N 0A N/A z Channel 6 Off NA N/A N/A N/A M0A Ch 7 _i off NMA N/A N/A N/A al VA _

Channel 8 Off N/A _NA/A _NiA NtA Gn 0 0-4 UQ OQ DATa Analysis Increment h Seam Positions Actul Recordable Indications Analyst Remartsb CD laoww"n Pcsition Seen rosiatin Yes No NMAAfttchnmet. 11 C Scan No.(t) Strt_ Stup Start Stm Channe I El to O3 Yes E3 No 1- 23 J5.42 107.42 t;4.00 125.04 Lbanndl 2 El El O FutherEvaluation

_Channd 3 0 0 Reqdred _ _

_ _Cbanncl4 0 o (R O Yes E No Channel 5 0

.Cbnnct6 0 0

0s El Ardliv Tair.CD No.

la I  ;-

tz

__ alnel 7 El 0 El AnamysisT. (aNo.

skill IODat. SW t/na Oe t8) Iu )-u_

MONTFRSl.~elDeVT1*I fi

MIISOUTHWEST TECHNOLOGIES

_ AUTOMATED ULTRASONIC EXOAMATION RECORD Site/Fiant: Wat Bat Weld Identificeaon: RPV-N16 i o/Rev'/ChXiCN: ISWT-PDI-AUr4/WliO EEaminrb No.: 77 FrojectNe.: 04-036 ~Wdd Darpto 0wtNcz-sb 202214- Devce Coafowtiwn: WAI-NOZCON-0001 MNod.Cot: 30 Stan Path Drwin. SPNOZOUT mum Date Examinatios Time S-rhS e TenperaturIF Data Acquisitio Operator (s) I SNT Level: laese tRDelgado I lI Alan Scheefer N/A 08 March 2005 S2I 0242 E St6rt 76 Data Acquisition Scan Coatroller Parameten laocmemtAxi Planeed Actual Scan Axis Pla.ed Acetl] Poitional Parseers Contsoller. PaR Lower Limit 85.42 _ 85.42 Lower Limit 124.00 124.00 Beam Direction: Twd Scm: Tfed Rotte Il i1.mit ;07.42 t07.4t Ttt Limit IRtt50 l s5.04- Tmnsdw Sir.: 22mm x45mm Incremnt Boom Extend increment Interval 1.00 Resolution 0.20 Code % of Overlap: N/A Mode Autonatic Scan Czwerslon Counts 100 Conversion Counts 100 Number of Scums 23 Scan Motion: B-141redional Conversion Units Inches Conyersion Units Dces B Roto Poniim 202.00 Corretone Delhit IusIn. 14.50 Hoist@ Nzle CIL. S3.9S Module Parsaeters 30 Cal 201 C l Records: Examinatiso Netes oo -

t..rt t D:_ . ... e C.f...-*J . S^Ir.

Cbanael I hnnel2 On us t-)PA16-L PA1oS ()

+ 90e00(deg

+ 9.00(deg

+000:)

+ 0.00(io) 1260201 12t)02UI _

PI (o Chanel 3 Olf V N/A N/ A N/A NIA N Chanoel 4 Off V N/A NISIA N/A N/A Evsmniation Rfn2rks: CD Channed 5 Off NIA NIA N/A NIA N/A t hannel 6 Offi N/A NiA NIA N!A NMA Cheana 7 Off NA N/A N/A NIA NIA Ch16nel S Or WA/ N/A N1A N/A 1NdA D*ah Aas~is Increenent kScuuaoitloslsAcual . _ Retordablelaiedstioiis AniysrtRemrhs hcnN~)

ic-remdio~silion I Sa~nPosilion Yes No NIA Atlachmenct SnN~) Start 9e Stt Istop Channel I1 O I 13 0[ Yes Gi No 1-Z23 85.42 107.42 124.00 185.04 Channel2C El 0 Furfitshevaluation

__Channe l30 073 El Reqditrd:

Chommel 4Q U 0 o Yes o3 No _

Cl chnoel63 0 0 i3Ardivet A-CNo.:

_ _ . alond7 El O El Anal'ysis T p/No.:

_l _ (hanneg El 0O l 4 Anatyst/SNl Leved/Dtte:-g r h A o 2- G 0 mffvosur urn

_-n MI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitelmant: WBttr We- Ide.titon: BPV-NI6 Prolltev ICN. [SWT-PDi-AUT4/U'00 Exmination No. 73 Pro ectNoJ 04-068 a: OtW aidDetrt 8b 202 (lW- DeviteCoxCe ur: WAT-NOZCON-0001 MediCoa.: 30 Scae PtbhDT rl SPPNOZOUT Exam Dte Ezalntioae T-t- Srfce Tom tare 7 Data Acquisition Operator(s) SNTLevl Jesse It. d AScefer N/A OtM2005 Start Sart MaI Eni 10254 0301 76 76 Sam Coatrolter Parameters Controller PaR Incraeet Aiet LowerLimit 05.42 Dutb Acquisition t5.42 Plannd ioerLinit

_e

.sd 184.00 Actual 134.00 Positional Parameters Bum Directionl 9.

Scan: Head llote Uperlimit 107.42 107.42 Lirnit 245.04 245.04 TmansducerSize: 22mtt x45mm Mode Awnomatic Scan Convecrsio Coms 100 Convcrsion Cocme 100 Number ofScans: 23 Scan Motion: Bi-directional Convention Units inches Conovrsion Units Degves Boom Rfovte Position 202.00 Corr ctio: iiith I dius I.14.50 Hoist NozzleCL 03.9 Module Parameters: 30 Cal 201 Calibration Reords: lExamin tion Notes:

e..- .. dm.ss c.... nir... step Off-et. =

Channdl I on PAt6-L ( 90D.0deg)

-I4 + 0.00(i.) . 1200210 Chunnle2 On PA16-S ( )490oo0(dcg) + 0.00(in) . 1200201 ulanuel 3 otr NIA NtA NtA NMA NtA . .

Channcl 4 Off NAt NtA a N/A NtA to NA Examinatin Remearks:

ChoYl 5 _ Off N/A NA N/A N/A N/A Cbmmel 6 Off NM NtA ntA NtA NsA Chahmel 7 Or NtA IVA N/A NtA N/A annel t Off NtA NA NtA. N/A N/A o Dsh Analysis

_Increment! &,Scar Positioms Actual Recordable Indications _Aatapt Reta rl Inocemn Poslionw Scan Position Yes No40 N/A Attacunen sca, No,($) Start Stop 9Stat Stop Chlinndl O Ei O1 O Yes El No J - 23 85.42 107.42 1Y4.00 _245.04 Channel 2 0 _1 0l Further Evaluation

_ haiinel 3 El El U Required:

.~~~2 *Cmel 0-_ Yes El No Channel5 0 0 13 ArchiveS2 /CDCNo.:

_Canoel 6 0 0 9 I__

___ . _ C__nn 7 O n AnalysisTpe/CDNo.: t _ _ _ _

jae 0 01I ?3 Ir M I __ ___c______

Analyst ISNT Larval/Date; -7,- o nw 55Fa i. r. an L~

K~rW om if. VT So I N) I

IMi SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD .

1 .

TwTLlLhTIAIT T flfl

/TA SitNflant: WtSBa Iedldden cal: RPV-N16 ,.

I Exaeshnatis No.: 79 Pr jetNo.: 04-036S oldDat1: OiNzo-Sh 2t2 *2--3 t WAT-NOZCON-0001 Med.Co-L: 30 ISc WPith Drawla. SPNOZOUT -I- urfeeTemerature 'F Data Acqbsition Opermtwr(s) / SN Level: JeateIL. Dolgado /l Alan Schaefer rINIA t.a. 0D 08 Marc 2005 Sesa Controller Parameters Coobntlo PoR Data Acquisition A -1 85.42 I-r- I.>

ULo nrL it Planned 0307 I

1 0320 Actual 24400

_ 76 Positional Parameters Ieam Direction: TVW 3.

sma: limd Rotate 107.42 UppaerLimit 305.04 rmnsducr Size: 22nm x 45mn I bncrient Doom Extend 1.015 Resolution 0.20 Codeof Overlap: NIA .

44ode: Automatic Scan ICoversion CoUts 100 Conversion Counts 100 Number of Scns 23 too SCi Motion: li-directionsi ICamtsion Units Conversionunits Degrees, Bo ltohk Puctida: 202.00 nk;..1

'-neomos Detita

_ _1_I I ~lU 4) lTois B Noic CfIf

. =::

S3.90

-4b ET imnnc 3 Off N/A X(A N/A 1VA N/A Zhsnnei 4 off WA N/A N/A N/A N/A 'Txamination Rtmarks: Cl Chin(d 5 On1 N/A NA NIA NfA NWA Cbalmd 6 Off N/A NtA /A N/A N/A __ _

annnd 7 Off N/A N/A N/A ttA N/A _

Clnd F Off N/A NIA N/A NMA N/A Data Analysis Iacrament & Scam Pasitions Axtaal Recordable lIdlcutioas Analyst Remarks SCMNo.(s) l::crenr1t Position Yes No /A AttachmO

__ _ _ start ~a p

Sl Slta Sto Chasne I 0 ~0- e 03Yes 0 NtO int N 1-23 53A2 107.42 Z44.00 305.04 Channd 2 0 El 0 Funthecr Evaluatton

_ Channel 3 0 n Rcquired:

Channel4 o a 10 0 Yes 1 No Channel 5 0 0 CD Archive r No.:

__ _ -nne7 0 E0 nalysiaT eCDNo.:

C

annel S 0 [1 E3 __ ___,

Analyst / SNT Level / Date:' l k , (A /acC t OO F IF O\k ~J I ot .- ,o o ww jo usts, UrF isn.U Z)

.IEMSOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMIMNATION RECORD Site/plant: Watts BSr Weld iendfiatlon: RPV-N16 rro/Rev/Chr/ICN: ISwT-PD1-AUT4/0//0 Exarnination N.: S0 rojecttNo.: 04-0368 WelDescariptilet OszNoo-Shb20 (304: IteviceCou gurades: WAT-NOZCON-00I _o Med.Conf: 30 Scan Path Drawler. SPNOZOUT Exann Date Exzaminaiino Thee Surface Terntare F Data Acquisition Operator (s) I SNT level: Jess R. DlgadoD 111 Alan Sechaser / N/A 0eMu 2005 Start I Rod S., l Ynd 0324 033 Data Acquisitiont SearnController Parametere Ie t Avis lnaed I Actual Stan Axis P d Actual Positional Parameters Controller PaR LoveeLint o5.42 o542 Lowerrimt 304.00 30.00 BeamDiretion: Twd Scan: Head Rotate LISt 107.42 107.42 UpperLimit 366.00 366.00 TrmkrAu Sbz= 22aun x 45mnn *0 .

Increment Boom Fxtend Increasat Intrval 1.00 Resolution 0.20 Code %o Overlap: NIA Mode Automatic Scan ConversionCounts 100 Convesinn Counts 100 Namber ofScans: 23 Scan Motiow: Bi-directional Converion Units Indies Conversion Units Degrees jBouRtte Poaitw 20200 C ior: Deut Raus n. 14S50 Hoist @ Nozzle C/L 83.98 ModalePradetrs: 30 Cal 201 CalibrationRcords: IExaminatiob Notes:

tie 5550 Mass (Rn ^roaM 1n Channel Un PAWL (1 + Y90.0(dsm t 0.00Ain) 12W0201 l~20 -t Clatanel 2 Channel 3 On Off PA16-S NIA 1)

WiA

+ 90.00(dedt N/A

+ 0.00(in)

N/A Q200201 N/A _

CD CD.

Clianndl 4 ofr N/A  ?IA N/A NtA NIA Fxminstte Remarks:

Chnal 5 Off NMA IVA N1A N/A NIA C3bannd 6 Off NMA WA N/A N/A N/A Chuand7 Off N/A N/A N/A N/A _N/A Channnd t Off NiA N/A NIA tVA N/A I Data Atutlyss incemaent & Sam I>VitlVn Act" eodbeIdctln nls eak Scaneomma s Psition I SarsPosition Yes No NIA Attadhmne Scno()Stalrt- Stopw Start stop cWmmw I O 173 01 O YeS El No 1-23 S5,42 107.42 30-4.W0 366.00 ahannel2 01 pi=[ FurthecrEvaluation Chanl 3 O ri El Requivad:

Channel 4 0 0] el oDYei El lNo C-hanndS O: n El ArhsTt d No.:

_ tanow6 El 0i 0l 1cluhl 7 0 n 1A0sT~/DN.

Analysit ISNT Lvl / Dt Xl){t~e J@r6\t ISVI tvitM ft VT n aw am?

MIll SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant: Watb Bar lWeld idestifisetion: RV-N16 Prmofw"2e1CN: MSwT-PDI-AUIJII/OI/I2 81 8isiNi.:

Prect N&.: 04-0368 Weld Descrifee: Outlet Noz-to-Sh (i202 Devke Coulpr.ratioo: WAT-WALCON-0t0.

Mgd.CL 09 19caPath Drawler, SPNOZOUT I EUN Dute ExaIrmiation Time I Sarfue Tern tare IF Data Acqmbitln Opera s) I SWN fTI:Drid f 12-Mar-0S Start End Start I End 1319 1326 75 78 Sc.n CostroelerParameters fIcremtArk Planed Actual Sea Ax Planned cAl Positionalpawmeters Controller: PiR Lowilimit 2238 2594 Lower Umit 9000 9000 Bean Direction: Cw/Ccw Sc Circnuferential Upper Limit 2958 _ 2955 Upper ialit 9000 9000 Transducer Size: 1.00 Inanlsent Radial hincssent kstsrl 90 DcI 7 CO- %ofOverlapI 10 Mode Automatic San Conversion Cots too Conrsion Counts too Nurnber of Ssor. 9 ScanMotins: Bi-direstld Co sikUnludts InCdes CnvesionUnits Degree HesdRoatePositon 0.00 Correctione Defknlt __ _ on

_ __85.43 Hoist (PiotPoint): NIA MIodule Parameters; i Ca 33 Caition Records: Exaosaiatinn Notes; Status Anple Directi Sen a Offset Step Offset WAT-33 ICheck forlimitations due to the proximity/ configuratios ofthe Cmastiel 1 On SS - 7.53( al 1.05tin) 0803301 Outleinozke Integral extension.

Channel 2 Oil 55 + + 7.53(iht - 105(in 0803302 Chlmol 3 On SUC 40 - - 995(in - 2.87inj 0803303 Cituisel 4 0/ 0 On SLiC 40 + 9.95(in - 2.87in) 0803304 Examninatin Rensarlrs Channel S On OL + - 10.56(in) - 1.22(in 0803305 Nozzle Center Hoist Posidiot- 8398 Channel 6 Off W/A N/A NI/A 1A N/A Bouus Rutats NMez Castor Pusitions- 20200 Channel 7 Off NA N/A N/A N/A WA Limited exaninstiont due to the Proxirnir of h outilemunozh Channel S Off NA N/A N/A NIA N/A inse extenin.

Icrement n_ A Scan Poitions Actual Recordable Indications AnastRenart San N ) - ne sitirn - S=cnPosition Yen No N// Attadhnsent._

Start Stop Start Stop ChasdelO 1;1 M 0i [Yes 13 No 5-9 2594 2955 9(00 9000 Clsamet 2 0 2 E3 Further Evaluation ___ _

Channel3 0 IZ Re2quireds Chad 40 IB 2a O Ye l No

__ Cal 5Oe 0 la Archhve TapCD No..

Channel6F- 0 13 ARA/i

. _ Channe 7 C0 2 Ajneysis Tape/CD No.: _

Analyst / SI Icvel / Date!! 1 Us IBMt FOM t..111ro5te.65A2

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request fir Relief 1-ISI-19 Attachments

~xam Number 82 Page 1 of 2 Watts Bar unit I RPV-N16 Outlet Nozzle to Shell @ 202 Deg Cursor Box I of 1 Scan Axis 90.76 - 92.93 Inc. Axis 21.16 - 24.76 Depth In Material 4.17 - 5.33 Channel 1 Module Coordinates Inc. Axis 25.83 - 29.39 Scan Axis 99.80 - 101.97 Channel 2 Module Coordinates Inc. Axis 25.83 - 29.39 Scan Axis 81.74 - 83.91 Channel 3 Module Coordinates Inc. Axis 27.60 -

Scan AXiS 99.80 - 101.97 Channel 4 Module Coordinates Inc. Axis 27.60 -

Scan Axis 81.74 - 83.91 Channel 5 Module Coordinates Inc. Axis 25.83 - 29.39 Scar Axis 97.84 - 100.01 Channel 5 Feature Analysis Summary Comments No recox-dable indic;ations chs 1. 2, 3, & A. j; ; i I : I r ;

i If ;

1f i I

t 1, i j , I, 1;

tabA> I I I F ILO iZ Al1tcA E4A-21

I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD .

lSwT-PDI.AUtl/Q0/!1q2I Wvth a U*-ut m: I S ExamIatton No.: 32 Proli-t Non- 0-03 Outlet Noto-Sh Q 202 Ioa: WAT-WAICON-t510

__. ... . g ,._z__ ........ _ _.

Mod.ConE: OoA n.f. E71-1-0 TO.- Sarre Tempeatere F

v. o ww r_ -

I-Dat. Avquiletiea Operate, (.) / SW Level: Caorles 1 Barrna I l Kally~algle I N/A c_- I Start l End 0740 024 78 1 78 E

Scan Controller Param~eters ir increment Axis Planned I Actual Axis Planed ctal I

Positioeal Parametern Controlla. ?aR Lower Limit _ SD I 500 BDen Direction: Twd/Awy kaw. Radrial UpUerLimit 36615 1 36615 Transducer Size: 1.00 brncement: circunoferential Increment Intervai 155 DC! 4 Code % of Overlapr to co,0 tdode: Automatic Sca.. Conversion Conts Ioo Convvoi Counts 100 Number of Seon: 234 Scan fotlow BI-dircetlonal Conversion Units Degrees Conversion Units Innies Heat Rotate PositIon: 0.00 r5~ta-h lUUlltJ I ]11.

6z.4 Hoist (Pivot Pont)l N/A Module Parameters: Cas Cal 34 N Calibration Rceords: lxawtdi Status Antie Direction Scnn Offset Step Offset WAT-34 Chedc for limitation dis e Proximity tnofdthe Chan.el I ONf N/A NtA N/A N/A N/A outi nozzle integral all Chl2 Off NWA N/A NA N/A W/A Caond 2 3 On SC 40 (A) t - I1.70n) + 2.00(n) 0803403 Channel4 On SLIC40 (-1 - 1.72(m) - 200(in) 0803404 Chasmel 5 On SLXC4 (+) - I.72(in) + 000 (in) 0803405 CiOD Channe 6 Off N/A N/A N/A N/A NtA Nozde Boom Rotte Centerilne - 20200 CD S Chanmel 7 Off N/A NA NtA NtA N/A xanmination due to the ronity ofthe oudet nozzle hai uusozl l Oif N/A W/A WA N/A NA U

lurv ASea, Pk tin., Actual E Analyst Resnarks Increment Position Scan Noa(s) Start I sto I a Yea X No 1-233 500 j 36615 - 3478 Cheanel 2 [0 2 Further Evaluation Chamnel 3 13 l2 0 Required:

Chunmel 4 0 E 0 Fl Yes 1 NMoI.

. -. i:-

(ahonel5 a (a2 _ Ardlivo TapedCNo.:

Chnnr 6e13 El l 10 A/B

_ =

lChanel 7 0

=

01 El AnalyolaTape/CD No.:

_ _ = =

WCannels 0 0 El N/A knnlystl SN'r Level / Date.

rryzlson. UT0 inm.990,

'k-n- - IS] : 13 1 -j r e- k Z o "-

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice inspection Program Request for Relief I-ISI-19 Attachments Page 1 of 1 rcam Number 82 Watts Bar Unit 1 RPV-NlG Outlet Nozzle to Shell @ 202 Deg Cursor Box 1 of 1 Scan Axis 25.02 - 26.26 Inc. Axis 36.00 - 49.95 Depth In Material 1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis 34.94 - 48.40 Scan Axis 27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis 38.1C - 51.49 Scan Axis 27.94 - 29.18 Channel S Module Coordinates Inc. Axis 36.00 - 51.02 Scan Axis 25.54 - 26.78 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2,

& 3.

Reviewed By D-K SNT Level _l_ Date 13 jrci200S E4A-23

ISwT Examination Summary Record PrJ.d N.: _' _ ySbh No.

368 Watts Bar Nudear Plant Unit 1 300016 Esarnatson Area: Reactor Pressure Vessel LlnelAasunbly: Nozzle to Shell Weld N-17 Identflicatloo: Outlet Nozzle at 15Wegrees T N H 0.

Not oC Cxum c a P..i Cr M~ R5YJacN Nw1 Efxam An*gl I 8 Anfalyt Record No Refflrn AUT IST-P0G-MIk1T5 7 AUTO - - AUTOfor 04clw. osummenf el Ewondos ICN 2 74 AUTSUC40 X

  • Co perFom f rn eooel s shell rwe ImIted due to boE 73 AUT SLIC4Ot X - CB iotal Oe 72 AUTSnt X - Ce LSOwPOIAUT4110 e 7-77 AUT PAIS X - Ce r l b r msperformed tow. noie bo. EOo CD'5. _'

d- DE E- 0 0

Do.

P,.prdBy: bD.t IPgeg Suffna.y No:

13-Mar-05 I OFI 300016 I

AA"ZC1

,,I1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATIlON RECORD Site'Plant: WatsBar Wld Identification: gPV-NI7 PriRrv/ZICbpCN_ ISwT4-D[-AUT4/0/0 I6 PrajectNo.: 04-0365 Melda t n i 5 cNExamnatina No: 67 Md.Cotf.: 30 Scv9"Pail Dra-tur. SPNOZOUT Exm Date Examination Time Surface Tm9er F Data Acquisition Operator (sJ ISNT Level: P.R. Rlein ja ItR 07 March 2005 Ssrt0 I Ed l d

[ 1703 1 1755 7fi 1 76 CD Data Acquisition Scan Coatrollervaraaetsm Increment Axsk rimed Actual Sm Axis Planned Actual Positiona] Parameters Controller PaRt LowerLinit 8542 85.42 LowerLinmit 5.00 5.00 Beamn Direction: Twd CD Scam HeadRotate U Untit 107.42 107.42 UnerLUnit 65.00 1 65.00 Transducer Size; 22rmm x 45mn Incrvamet BoomuExind Inccae Inaiterval 1.00 RcwbZluiin 0.20 Code % of OerbTp: NtA Mode: AutwonaicSecn m Conversion Counts 100 Conversion Counts 100 NIuberofScaw. 23 Scan Motion Bi-directional CouversioAUnits Inches Convrsion Units Deg-e mom Rotate Posiioe 158.00 Co Def/ult Rdius n. , 14.50 Hoist @NozzleC/L S3.91 on0 0 ModulekParameters: 30 C 1201 CalibratiouRecords: isxamination Notes:

IRaI.. Aaale. Dklrinav Sean Offst Ste" Offst WAT-20 I Chassellt O PA16-L 1- L 90.00t d + 0,0n) 1200201 XPo'COD Cbhnad2 On PAI6-S - + 90.00(d + 0.00in ) 1200201 Chanmdl3 Off N/A N'A N/A NA _ N/A Cbannd4 Off N/A N/A N/A N/A N/A FxsmiaatieafnRemarlc Clanumd 5 Off NA N!A N/A NIA N/A saicftcl Qff_ N/A _ N_/A NiA _NA N/A td 7 01! N/A NtA N/A N/A N/A CIsdc8 Off N/A WA N/A N/A N/A onz-Data Analysis CD)

Inceeat

  • Sem Positions Acuaal Recordable Dodicatto _ Analyst Remarks --

SI' _ nc entPosition Scen"8sition Yes No N/A

Attachment:

San ;Start stop Start Stop Channel I 0 -, 0 _ Yes Il No I-23 55.42 107.42 5.00 65.00 Csauaut 2 E El 0 Further Evaluattoa 3 0 Channel__Chnc n 21 Required: CD1

_Ched4 n n n Ycs El No Channel 5 0 0 El Archiye F&peI/) No.t

__ __ Clsanncl6 0 0 0 1.

_____. hannel 7 0 ° Analysis TWCD No:

___ ChanndeSa 0 O_ 2 IA Analyst / SNT Level /Dl t (. 1 r,. I nuveojas4e.I orr Ov. I aaw)

,i ll SOUTHWEST TECHNOLOGIES cm AUTOMATED ULTRASONIC EXAMINATION RECORD Siteflisnt: Wats~r Wldldotification: RPV-NI7 1PrVIRev/Cl/ICN: ISwT-PD1-AUt4/M/0/O Examinatijo No.: 68 Projet Noa- 04-0363 Weld Desriti n ODtNewtS- lISVa 6V.-12 DeviceComfig uratio: WAT-NOZCON-00t Mod.CeaL: 30 Sean Path Draving: SPNOZOWI Bu Date I Examluati Thim SSurfua Ten7rpeature F Dta AcquisitianOperator(s)/SNTLevel: D.R ldjan I11 Marc 2005 Start I nd SEnd i1757 1807 76 76 Data Acquisition ScanController Parameteur Inerement Asia pland Acual Scan Axis Planned Actual Poitional Parameters Conhrollt PaR LowrLimit ss.42 85.42 Lowerlimit 64.00 64.00 BemnDiction 4 Twd Scan: Hlead Roal UpperLmit 107.42 107.42 U Lperlimit 12504 12504 Transducer Size: 22mm x 5nmm Incruem . Boom Extend tzrunenclateval 100 Resolutlon 0.20 Code  % of Overlap: N/A Mode: Automatic Sean Conversion Counts 100 Conversion Counts 100 NwunberotScans: 23 Sc Motion Bi-diectional ConversionUnits Inhes Conversion Units Degrees BomnoCDItinftinnt 15.-00 CencAti Onfeult pudi.0 in. 14.50 _oist 9Nozzl C/L 83 98 ModuleParamnters 3tl Col 201 Calibration Records iExaminsaton Notes:

Sterns Anein D ;~s Sc.nOit~e St.e CFfst ":AT-201 Channel I On PA16-L - + 90.00deg) + 000(in) 1200201 Chanoel2 On PA 16-S (-) + 90.00[d) + 0.00(io) 1200201 _ _ __

Channel 3 Off NtA NtA N/A N/A N/A Channel 4 Otr WIA N/A NUA N/A N/A PEaminstlon Remarks: 5.

Channel 5 Off N/A N/A N/A N/A NtA 1C12 Channel 6 Off N/A N/A NiA N/A N/A Chonnd7 Off N/A N/A N/A NtA N/A ChanntS Off NtA N/A N/A NIA N/A Data Analsi Increment &ScanPoeitions Actual Recordable Indiuatbns Analyst Remarkl Scan No(s) Inf-ne ptaition I Sams'csition Yes No NMAAttchmnene o(5) Stwat Stop Start Stop Cliatm I 0o 0° Yes El No 1- 23 85.42 107.42 64.00 125.04 Chunnel 2 0 El ° FunerEvmalugion

_liuncl 3 0 n 03Requied _

i_ Chhanod4 0 El 0 D Ys [ No

__ Chnuel 5 0 0 El ArchiveTax/CDNo:

_Channol 7 0 0 Analysis TapC No AnaAyst .. E I Leve a0 Anls I ~SNTLvl IDote : A swrvFOK. Ursa t I

1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Si nt WtD eldIdentificatjox: RPV-Nli7 Pro/evi1b CN: ISwT-PDI-AUT41/11010 zxamadtlo o. 69 Pr. .ctN r.z 04-036f weld Deseri floa: oteNe Sh O 124 11 D Co errattoa WAT-NOZCON-0001 _

Mod.CenLr 30 Scan Path Drawin SPNOZDUT Ezam Date xamintlmtioTime Surface Tterature F Data Acquisition Operator() ISNT lvel: D. R. Klenjan I IR 07 2005 ___S Start_ End

_1814 IS123 76 1 76-Isata Acquisition P.

Scan Ceatrallerlerameters IucreatAxls flosed Actual ScanAiso Plauned Actual l Feeilwanl Farewt-rs Conbtollw. PaR LowerLinnt f5.42 85.42 LwerLimit 124.00 124.00 Beam Directi.. Twd Scan: Hcu dRotte Ff Virwt 107.42 107.42 Up rlimit 15.04 1I5-04 T-nsducerSim: 22mm x45mm Incrennt: BOOnExtend lnmament Intenral 1.00 Resolution 0.20 Code % ofOsrlap: N/A Mode. AutomIatic SCSn Conversion Couts 100 Conversion Counts 100 Numberof'Scens: 23 Scan Motion: Bi-directional Conversion Units Inches ConversionUnils Deges BoomRotatePosition: 150 Cornvotio Default Radius I 14.50 Hoist @ Nozzle CL: 39 8 Modle arameters: 3l Cal 201 Calibrati Records: Examization Notes:

Channel I On 0P.

PAI6&L + 90.0(deg) + 000(in) 1200201 Channel 2 On PA165-S + 90.00tde_ + 0.In) 1200201 Channel 3 oir N/A NMA N/A N/A N/A Chsnnol 4 Off N/A NIA N/A NtA N/A Examination Remarks:

channel 5 ONf N/A NA NVA NI/A N/A on Channel 6 Off N/A NMA N/A M/A N/A Chtanne 7 Off N/A NIA N/A NMA 1UA Channef O off N/A N/A N/A NtA Ni/A Dbit Analysis nfcrement & Sean Pantilons Actual Recordable Indications AuslystRoomarks Sa_ (5) I4 Incrmlen t Position ScanPsition Yes No N/A Aftschinent: ___

Stort stopts Sut Stop Channel I C OYes l No f4-I I-23 85.42 107.42 124.00 103.04 C nnnd2 0 E3 C FultherEnvtuaton Channcl 3 0 n E Required:

ChannelO4 0 0 D, O Yes El No C___wi 5 0 0 C Arcmv/crDNo.: ri a _6 0 ° I JT-- --

_Chamel 7 0 0 E AnalysisT e/CDNo.:

. _ Channell U 9 I MIA Analyst / S1iT levelI Date:

I'\ ,ooz 3wTr o5MNf. Ursa IF-. 0n&

\ __ I

I11 SOUTJWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitePlat: WtsBar Weld ildeatifiatlow: RPV-N17 Wrro/RICchCN: ISvT-PDI-AUT4/0/0M Ex-A letit N: 70 ProjectNo.: 044368 WeldDeiptldon: 0.Oe-t 64,15 9^1. DevkeCeoia ation: WAT-NOZCON 00I Mo4.C.RL- 30 Seao PWalDrawin: SPNOZOUT ExamMDate I EAmist leIe FSTeer Data Acqialtion Operator (s) I SNT Levd: D. IL Kel msan fn 07 Mah 2005 1S24r l_1834 1 76 76 Scan Ceotrollerlaraumet Controller PR InsremeatAsls LowerLim Plnned 85.42 Data Acquisition Actiul 85.42 ScnAxis Lower Limit Pl 14.00 d l _ArActual I400 Poitdonal araimeters BearmDirection Twd L0o SC=i Head Rotate Upr Limit 107.42 10742 lupper limit 245.04 1 245.04 Txasduer Sie 22mm x 45mm Boom Extend Inement Interval 1.00 Resolution 020 Code %ofOvelap: NA Mode: Automatic Scn Conversion Counts 100 Conversion Counts 100 Number of Scaus 23 ScanMotionu Bi-direclionul ConersionUnits Inches ConLvrsion Units Degrees BoomRotaePotition: 158.00 Corn Defoult Radius InL 14.50 Moist@Nozzle CL 83.98 Modul hrasnetere: 30 Cal 261 Calibradox Records: ExaatstIF Notes:

MAs A.iA Direction S9n offset Ste O-hietI WAT-201 Channel I On PAI6-L -) + 90.0(d% t +0.00(in) i200201 Clsanad 2 On PA16-S - I 90.00(dco + 0.00(in) 1200201 Chlanel 3 Oif N/A NMA NA N/A N/A Channel 4 Off NtA NA N/A N/A N/A Examination Itnarts:

Clhnnel5 Off N/A N/A N/A N/A N/A alannel 6 Off N/A N/A N/A N/A N/A Channel 7 Off N/A WtA N/A N/A N/A _

Cannel S Off N/A N/A N/A N/A N/A Data Anslysco InreMet & S9a Poaitions Actual Recordable Indicatioas Analyst Remarks

_ o nchement Position Scanosition l Yes No NWAAtiadunent ScanNo (s) Start l S Stan s0op Chauel I 0 0 O Yes 0 No I - 23 85.42 107.42 1U4.00 245.04 Ciminoll 3 El 0 PurtarEalualion

_ __ Clane!L3 0 0 _3 Required:

_ _ __ Channel4 0 0 0 n Yes O No

__=__ Channel S 0 0 Archive TapeCCDNo.:

___ Chunnel6 0 0 E3 J

=Chws_-eh 7 0 0 i3 1ytisTa No.:

-Channeal 0 0 3 i84 1 A An;lstI SN? AT, I D/Datee

- s- - ---- - - ...

I I He H" -L ------

-- - : --- X :X: 0-- A

rr IHIH SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitafflant: Watts Bar iWeldIdentifetkhin: BPV-N17 jwretkev/ClbV1M:N ISwT-PlX-AUT4@/W0 fPrijectrNo 04-036's __WeUdl~srptiaw. 0.tN--to-Sbh1lV(44 Dv eCourgitrem: WAT-NOZOON-0001 resuao.

Med.Cuet: 30 Mesa Tit~iDrawing; SPNOZOUri E-wD." Examination That SurfacQaTtuxrwutre-F bift Acquisition Operator (s) /SKT In d:. D. R. NeleuJa I 11 07 March 2005 l St rt l Ed _ S ait ~ 7 Date Acquisition Sam Coatroller Parameters Ineremt Ask _ lsz!ued __ Actual Sean Ais fauned Actual Positionl Parameters Contiroller PaR lornm it i5.42 05.42 lwer liit 2U4.00 I 244.00 Belm Direction: Twd Scan: Head Rotate Upp liit 107.42 107.42 UUperLimit 305.04 305.04 Txensduer Size: 22mm x45mm Increnwat Boom Extend lnariniena t[mo Lo0 Resolution 0.20 Code % ofOvedap: N/

Mode: Automatic Scan Conveesio. Counts 100 Convenion Counts 100 Number ofSca. 23 ScaMotion: Bi-direetional Coweesto. Ur/its Inches Conerusion Units Degeps BooerReuttoP sjo 15S.00 Correction: Debult Rdu In. 14.50 Hoist Nozzle C. S3.9s Modnlaraseters: 30 CA 201 Calibration Recrds: Examinsation Notes:

Stain Au io ,ie &weGIe S.. 'A--^

Channel I on PA16-L - + 90.00(dog) + 0.00(inl 1200201 CD CD Channel On PA1-(-S + 90.00(deg) + 0.00(in) 1200201 COannel 3 Of VA NIA NtA N/A NtA Channel 4 Off VA N/A N/A . NA NtA Euminsation Rnarks: W 0 Chnnel 5 Channel 6 Off Off MA N1A NA NA N/A NIA NMA N/A NiA N/A

~1-Chnnnel7 Oil MA NIA NIA NIA N/A CD-Clnt S 0/ N/A NtA N/A N/A NtA Data Analysis

- - Icrmnt & SC" Positoas Actual Recordable Indications AnalystRemarks

~~ A camNo.(s) I en Position Sa Position Yes No NIA Attdcmanent_

Stect stop Suft Stop Chanel I O R 0 O Yes El No I 23 85.42 107.42 244.00 302.04 COannel 2 0 Pi 0 Further Evaluation Channel 3 0 n El Required:

Channel 4 0 n 2 D Yes El NO Channel5 0 0 (a Arhive TapefCD No.:

Chann.^l 6 1L 0 2L ._____. ..

.. Channel 7 n AnElysisTarctCONo.:

A Clinncil S O_______14_l__

S/SI:T Levecl Datoe l l nWr]FORKM. VT9. t(R-*5MM t1- I

1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitJllat: WatlBa IWBldIdctid inctiv: KV-N1I7 Prtt!rvlCbWlCN: ISSwT-?DL1-AUT4/W00I -A 2 ProjetNo!04-036S 1WeldDeeripttbw 0UtNtozSh 1w -Z3 J4 vlcCaDfetualna: WAT-NOZcON-0001 ____________ _72 ModCeatf: 30 ISms Path Dnwlat . SPNOZOUT Fam Date Exatamita nTTioe -Pratp Data Acqunition Operator (1)1 SN! Level: D.R. Mlunjn I 11 07 March 2005 Stat rtStad Data Acqustislo Sac Coatroller Parameten IncrernertAxis Plane d lAtual S"As Planned Actual Positioaal'arameters ControUer PaR LowerLimt S5.42 5.42 LoeLiit 304.00 304.00 Btarn Dweio Tnd Sc"n: Head Rota Upper Limit 10742 107.42 Upper Limit l 366.00 36 oducer Size: 22mm x 45mm Icemanent Boom Extend incrinent lnval. 1.00 BRemultio 0.20 Code% of Obelp: N/A Mode: AutinaticScum ConverslonCounts . 100 ConvymionCoiunts IWO Number of Sns 23 ScanMorowo RBdiretlional Cnvmrsioa tinits inches Conversion Units Degreet Bmn RotbtePositim: 151.00 Correctionn DAult In. 14_50 Hoist

_Aus (a) Nozzle cn _ 83 9S Module Paraueteru: 30 Cal 201 _ Cibration Records: Examlination Notes:

i>

Channel OI PAI6-L - 190. 0 in200201 (2bunel 2 On PA16-S - + 90. (dea) +1().i) 1200201 ainnsd 3 Off N/A N!A N/A N/A N/A

-4 Channed 4 OX N/A NMA N/A NMA N/A Fxaaui.ntjw Rnmarkcr Channeld5 Off N/A NtA N/A /A NtA Chanel 6 Off N/A N/A N/A N/A N/A Channel 7 Off Nt A NtA N/A N/A - __________ __

channd S Off NtA N/A N/A N/A NtA Increment & Scan Nitiion Actual Recordsbe Indicaticas Analyst Remarks a No4s) -Incnt Position Scm Positiwn Yes No N/A Attfsacent Stun Stop Statn StoP Chsncl 0 P3 0 OD Yes 1No C -4 I- 23 85.42 107.42 304.00 366.00 Channel 2 0 1 0 Further Evaluation

__ ____ _ __ _ __ __ Charnne3 0R P Reqtuired:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Chanurl 4 0 0 13 ° Ys El No Channel 5 0 0 o Archive 'repea No.:

'Channel 6 0 0 0 13 -

Chnnel 7 0 0 E AnolysisTt e/CDNo.

A____ Channl 8 0 n A _I Analyst/SNI Level I -ate:

D \ /

.k I Iz- I a A  ;

zwTORMN. t'rT . "2s

\

pE1111 SOUTHWEST TECHNOLOGIES M AUTOMATED ULTRASONIC EXAMINATION RECORD S Piast: Watt Bar Weld Identificatien: RPV.N17 1PreRevfClii/CN: iSwT-PDI-Afl)TIO/Il&2 IXInstiorn,. 73 Project Ms. 04-036t tdd W D  : OutletNoz-to-Sh9i 15 Device Confituraiia: WAT-WALCON.O0I _ _ _

MSdCa: 09 Srs Path Drawler. SPNOZOUT Exum Date EIUsamatiou Time SurfaceTermerastre 'F Data AeqmisitinoOperater(s)lSITLvel: D RLflahijan/I- 12-Mar-S5 01 313U7 S S78 Scan CtralkrParumntein lacrnment Axis Phaed j Adal aiAxis ]ae Actual Positiaal Psuanieters Controller POR Lower Limit 2238 2594 Lower Limit 9000 9000 BeamDirection: Cw/CUW SCan Circumferecnial UpperLJmt 2952 2955 upLeruimit 9000 9000 Transdor Size: 100 lncrentm - Radidl Iocenbet beaal 90 NI 7 Code % of Overla 10 Mode- Automatic Scan Cmsvenrdne Comts 100 Cooversion Counts 100 Numberof Scans: 9 Scan Motion: Bi-directional CoMnvsion Us inches Conversion Units Degres Head Rowa Posk 0.O 0 0 COreCtitD Derault WRaius Is. 85.43 Hoist (Pivot Point): NA M vdleParameter: t9 Cal 33 Cdlibratie Records: ]Exaglaties Nod: 1 CD States Arle, Direetion Scan Offset Step Offset WAT-33 c--- fr limitations duc to the proxisiiyWI coitgrtion oithe A" Channel I On 55 t-) - 7.53tin) - 1.05(b) 0803301 outozieintegral extension.

Clnel 2 On 55 (+1 + 7.53Ci) - 1.05(in) 0803302 P00 Cheatrt 3 Osl SLUC40 - 9.95tin) 2.87(in 0803303 Clmimcl 4 On SiiC 40 + + 9.95cn - 2.i7(in) 0103304 , _x _naiion Remarks:

CD CDt Channel5 On OL + 10.56rn) 1.2(in) 0803305 Nso'eCenter HoistPosition -398 Cn6 Off NMA N/A MA N/A N/A Boo RaRoftieNozdaCenterPosition-15800 0 1anel7 t7ff N/A N/A N/A N/A N/A Uunited examination duc o the , IMInyof the outletncezle (JQ (.

ael Oft NA NMA N/A NIA N/A jirtegrai extension.

U)CD Ineremaent & Ses hesitleos Actahl Recordable Iadlatisdn Analyt Roearla 0S 5:

cNo.() - hiiremeot Pofition Scan Psition _ Yes No N/A Atanc ne:

start Stop Start Stee Charndl 0 t El O Yes E2 No 5- 9 2594 2955 YUOO 900O Channe 2 0 l 0 Furthae Eveluation

.,___ _ __ Channel 3 0 G 0 Required:

_ ChCnned4 E 0 O Yes 1 No

__aned 5a 0 G Arsh'vc Tcpc/CD No.:

____Caonei60 0 El 7 A/BE Chawnel 7 0 ii Anlysis TaeCD No.:

I__aalanJ O10 O/A __ __

Analyst / SN.mise / Daten . t I 1 1 Y sfn roamY. erQ (Ko ISM h it \

a--

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit I American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-4SI-19 Attachments Page I of 2

.xam Number 73 Watts Bar Unit 1 RPV-N17 Outlet Nozzle to Shell @ 158 Deg Cursor Box 1 of 1 Scan Axis 90.76 - 92.93 Inc. Axis 21.16 - 24.76 Depth In Material 6.63 - 7.79 Channel 1 Module Coordinates Inc. Axis 25.86 - 29.40 Scan Axis 102.18 - 104.35 Channel 2 Module Coordinates Inc. Axis 25.86 - 29.40 Scan AXiS 79.36 - 81.53 Channel 3 Module Coordinates Inc. Axis 27.61 -

Scan Axis 101.13 - 103.30 Channel 4 Module Coordinates Inc. Axis 27.61 -

Scan Axis 80.41 - 82.58 Channel 5 Module Coordinates Inc. Axis 25.86 - 29.40 Scan Axis 97.84 - 100.01 Channel S Feature Analysis Summary Commets 2, No recordable indications chs 1, 3, & 4.

- -:1r, 12 K-,r C,k -o 5-L)

E4A-32

-- 4136P IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Flant Watts Bar Wed Identliication; RPV-N17 ro/Rev/C CII: ISwT-PD1IAUrl/0ooII&2 ExRffeuN 74 Prjet Na.04-036S Wea Dal atienOutlet Noz-to-Sh a. 158' DevIce Coafl ratita WAT-WALCON-O010 Mad.Coal 08A ScanPat. DrawiPNOZOUTg!Ea Data EI aination Ti.. Surface Temnrature OF Pat A~urt~o~pr~sr~)/WTre Crlsh.3arr /MKelyalleN/ IStart I Fd I start I End l0sts Acquesl92oiOperat8r (s) / VW t C rlgn /_ 0 9 78 78 SeanCaatraller parmers 1._remsnt Axik Planned Actual Scum Axis Pleased Actual Positional Parameters Controller PaR Lowr Liit 500 500 L.*crLmit 1878 2226 Beaut Direction: TwdUAwy Scan Radial JpvierLimit 36615 36615 L mit 3311) 3478 TransducerSize: 1.00 Increment Circumferential knement intervl 155 DCI 4 Code % ofOvedarp: 10 Mode: Automati oen Cerersion Counts 100 ConverslonCounts 100 Numbof Scns: 234 Scan Motion 13-disectioual Conversion Units Degrea Conversion Units Inhecs eal Route Positione 0.00 an CD oeremt we Deliult Racius In. 85.43 .ot (ivot Point): N/A Medal Parameters: OSA Cal 34 Calibration IErnlatieNat..: Ntards:

Status Anile Direction Sean Offset Stan Offset WAT-34 lChec for lImitations due to the proximity/ onfiguration of the Channel I Of N/A NA NtA VA N/A outlet nozzle intel extensie.

Channcl2 Off N/A N/A N/A NVA N/A Cannld 3 On SLIC 40 ( l.72(n) + 2.00'in) 0S03403 '0 Channel 4 On SLIC 40 (- - . ni - 2.00(in) 0803404 Examination Renaria:

Channel S On SLUC 40 + -1.72(:n) +o.0in 0803405 Nozzle Hoist Centedine - 8398 Channel6 Ot¢ IVA NIA NA NtA NIA NozzleBoomRotateCrntrDllne-1I 58 Chanel7 Off N/A N)A N/A N/A N/A Litntedlciamation dueto the oimi oftheoutletnozleintw IChnanel 8 Off NA N/A N/A N/A N/A zetension.

En p-.

_ cremsat

_ & Sea_Poiions Actual Reeordable Indications Analyst R"mriu Sean No Increment Pesiion Sean Proitior; Yes No N/A Attaem!

cStat M. S Snrt IS teot Chanan IO 2 D Y a No 1.233 500 36615 2226 3478 Channel2 0 2 i3 rftierEvlttualon

_ _ _ _ (Cannel 3 0 i3 0 Required:.

: _ _- _ . amel 4 0 a2 0 O1 Yes G2 No

____ - - _=3 _ ChannelS 0 0 ArdOve Tape/CDNo.

- _ _ _ __-- _Channel6 0 0 M IO AIB _

.Ch:il =_ 70 0 [a Analysis Tpe/CD No.:

__ __D I____a____ D la IVA AnalystI S / Data iTLve I OA

-I :A= = L 05::-

L.

...- -- ----- - , ' -'-- - ' L- ' ' '- ' . ..

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-19 Attachments Page 1 of 1 Exam Number 74 Watts Bar Unit 1 RPV-N17 Outlet Nozzle to Shell

  • 15B Deg Cursor Box 1 of I Scan Axis 25.02 - 26.26 Inc. Axis 36.00 - 49.95 Depth In Material 1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis 34.94 - 48.40 Scan Axis 27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis 38.11 - 51.55 SCBa Axis 27.94 - 29.18 Charnel S Module Coordinates Inc. Axis 36.00 - 50.95 Scan Axis 25.54 - 26.78 Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2,

& 3.

Level iDate %g;C° Reviewed By 1 0 %oi9~SNT E4A-34

ISwT Examination Summary Record P5e No. SRO: Summry sheetNo:

368 Watts Bar Nuclear Plant Unit 1 300013 Examination Area: Reactor Pressure Vessel UnslAssenmbly: Nozzle to Shell Weld N-t8 0 Identification: Outlet Nozzle at 22-erees T N H IE Prced Exam R E Re tn C HA42I Ru i N I Ex +/- B BecL.

Regart N o RamJs AUT Mwl-POIAUTt 40 AUTO - - AUTObrttitess omeanrto Enmina~o ICN2 50 AIUTaScI40 X - CB ptonned frm vesselodrell arm sted duetonozzle 000 49 AUTSLIC4T X - CR int.W erlenlsn.

As AUTS5T X CR CD0 9SrT-P04AUT4JOM 43.4 AUTPA16 . X CB 020001 WBtOO E-klons pedonmod ftl sous boe.

TwoCod. DoMpbswle I"worktjm.

,40

~C prepared By: IDC IP..:

A Isummary No:

l 6e, 1 113-Mar-06 1 OFI 300013 I V) fi" c/3rmS

_ _IH SOUTHWEST TECHNOLOGIES AUTOMATEID ULTRASONIC EXAMINATION RECORD Site/Plbat: WattsBar IWdldndficadon: RPV-NIJ Pro1ReyAlChtJCN: ISwT-PDI-AUT4/00'O Exin iti .: 43 ProietNo.: 04-0368 Weld Daesripti On NattNu-ShQ22 (5.-6) DetesCofturattlw WAT-NOZCON-OOOI Med.CouL: 30 StanPathfDrawin SPNOZOUT Elxam Date lftateti x Time SurfaFeTan entureJ!

Data Acquisition Operator (a) SNT Lvd: D. R. Kkieu/jan H2005 I StaR i 1 nd S76t Ed 1658 1702 Data AcquisItdon Scam Controllerlramete lIarmet lenad _ AAtal _Sca s lanned Actal Posititonal Parameters Controller PaR werLimit 85.42 8542 LowerLimit 5.00 5.00 Beam Direction: Twd Seen: Haed Rotate Uper Limit 107.42 10742 UpwLimtit 65.00 65.00 TransducerSize: 22mtn x45tmm Inerement: BoomExtend lacronastlmevat 1.00 Resolution 0.20 Code %ofOvedap: N/Ad Modec AntometicScat ConversionCounts 100 ConversionCounts 100 NumborofScans: 23 ScanMotion: Bi-directional Conversion Units Inches Conversion Units Dgrees BoonmtRolatePttion: 27 00 Conection: Defult Radius In. 14.50 lleixt@NaezirC(L 8398 ModuledPa raeeters: 30 Cal 201 Calibration Recnordr ERxaminati Notes:

Status AnIe untie bea Olier Scan Sirp Oilet ___-_

Chwumnd I On PA16-L (-) + 90.00(dcn) + .00t(i) 1200201 Channd 2 On PA16-S -) + Y0()

4. + 0.00in) 120W201 Channel 3 Off N/A NtA N/A N/A N/A Chwimnd 4 Off N/A N/A N/A N/A N/A Exausinatirn Rem-rke Channel 5 Off N/A N/A N/A N/A N/A ChnndE 6 Off N/A NA N/A N/A N/A _

Chanrml 7 Off N/A N/A N/A N/A N/A Chssael t Off N/A N/A N/A N/A N/A Data Analysis Inerement & San Pcsi nsActual Rtecordable Indkations Anayst Remarks CD CD ,

(74 Scan No s) Incramnt Position Start So ScanPosition Start st Ctanne I Yes No N/A Atelamnt:

0 O1esO o ____Elye_ _No r12R:

1-23 85.42 107.42 5.00 65.00 Channel 2 hinuml 3 0

0 i3 n-0 Furthser i3 Required:

Evaluation 15rn Channel4 0 n la 0 Ycs 0 No

__ _ ChannelS5 0 0 i3 Archive T No.:

1/CD r 6 U uCann Id 7 i Cirnead 7 0 0  ! Analysis aJCD No.: _____ __ ___ ___

_ a_ a 80 0 13 4 1 I Analyst / SNT Level / Datel Carlos M. Barre / 11M 07 Mar 200 \

I5WTZrOe1t. VrA PA.M)

'I- \ K~j

AMIMi SOUTHWEST TECHNOLOGIES w AUTOMATED ULTRASONIC EXAMINATION RECORD SitWeilmt: Wts Bar 7 Waii Ideatifidati a: RPV-NIS IPr9/RrwtChRJICN: ISwT-PDI-AUr4/C0dD Ex *.:

NtIO. 44 ProjeNe.s 0440368 Welelicrrptia: oMN.sIht22-(64-1Ie5 Dr Con ration! WAT-NOZCON-0001 _ _ _ __*

Med.Canf2 30 Scas PFtalDrwineg: SPNOZOUr xatma Date Examination Time S"rFae T t *F Data Acquisition Operator (s)I SNT Level: D. RJ jeJan I nI 06 Marc 2005 Start I 7End 7676 11713 1725 7 JDataAeqaitsition _

Scen Controller aramdeters iacreast Alxi, Ptanad Actul Scan Axis Planned Actual Positional Paraneters Controier. PaR LowuLimit 15.42 85.42 LowerLimit 64.00 64.00 BeamDirtion: Twd Scon: Head Rotate UpparLimit 107.42 107.42 UpLerLimit 125.04 125.04 Transducer Size: 22mm x45mm Irpucmt: BoosnExtnd ]axtinautztleava 1.00 Resulutkua 0.20 Code %ufOverlap: NIA Mode: Automatic Scan Convusion Counts 100 Conversion Counts 100 Number of Scans: 23 Scan Motion: Bi-directional Convrsion Units Inches Conversion Units Degrees sawn RouatePositione 22-0 Codtioz Default Rodi.s J. U450 Hotst Nnzzle CIL: 83.98 0 En COD ModateParaeter: 30 Cal 281 Calibration Records: jIaansiatiton Notes:

S!:!-- A. 0,... nrr.

Mr.W. Ws ntr.

fwATlnl I CAnael tA1-L Is On I Dat20e: + 90S00(d?) +0 Chaelo2 Of, PA]6-S (ar+ 90a00adeg) +0000(ilM) 1220 Ch aasn.

3 r/AOff KA N/A NIA NM Channel4 Off IVA NIA N/A NIA NIA Rmrks ExaminationBn Chunndl 5 Off N/A NIA N/A N/A N1A Channe 6 Off N/A MIA NIA NfA NIA 0-.

Channel 7 Off 1VA N/A N/A NA NMA Chdne S Off NJA NiA N/A N/A NIA Datal Analysis Increment

  • Sc reltiostb Actuail Recordabkleldiceflaps AnalystRetaatb Scan io.cSt osition I Scan Position Yes No N/A Attachment CDi-S~~

) Start Stano Statui o Ch nndl I El El O 13 Yes O No 1- 23 85.42 107.42 64.00 IU 04 Channel 2 D Ela O Fuwaher Evaluation Channel3 LI 0 E Required Chatmelz4 n El Yea El No

_ Chdne 5 0 0 El Archie TapdtCD No.

i mtebnl6 [1 Cl El F 1

, Casnnel97 n E"I WRI bs dqCDNo I Chavnd I 0 O ED 1 1 Analyst / 5ST Level / Date.,

Gorlot NL Barrere 1111/07 Mar 70M l

A n t

1\

Don"rfovr " W of QM ~-)

ISwT INDICATION RESOLUTION RECORD PROJECT No.: lE: ,SHEET No:

04-0368 l Wattb Bar Unit 1 020001 eXAMINTI0N AM( SYST I COU LINE I SUBSSMLY { DNm~cATION \ CALIBRTION SHEET(3 RPV Nozzle to Shell Weld N-18 1200201 EXIINE NT LEVEL PROCEDURE EXAIIIN"ATlN METHOD David R. Klelnlan X t, REV. VT 0~TP~AT 0 PT El Kr , U1' 0 Krl 0 Er E m N :.

INER: SNTLEVEL C WELD TYPE El MEO 43.

NIA N/A 0 LONGITUDINAL OTHER: r2 0.

Two indications were detected and sized in the examination area of RPV nozzle-to-shell weld N-18. The indications were evaluated and found to be acceptable In accordance with the 1995196 Edition of ASME Section XI Table FW 3512-1.

,E e. -Z Indication e 1: Indication # 2: cI 0 4 Azimuth 133.80-deg. 158.90-deg.

Flaw Location OD surface sub-surface s-dimenslon NIA 1.20" t 10.83" 10.63" Length 0.83" 0.75" 2a OA5" 0.36" a 0.45" 0.18" anl 0.50 0.24 ant 4.2 1.7 Allowable alt/ 5.2 3.7 ATTACH4MENT RESOLtT YES '

REVI N BY n R m:s& SR T SNT LEVEL

_L10 LEVEL D DATE AoTME mprch?-c°s iswT FORI UT 02 (RV. 07m

Length = 0.83" /L 10.83 /

Throughwall (a) = 0.45" Surface connected I.

- 10.45"1 IT:--/

1- ,,

N-18 Exam 43 inH. #1 @ 133.800

Examination #43 Indication #1 uMINlIMIIfmI'An Sis AI .wlulolw li

2. t pta~

CD rndZ ao

10.83" Length = 0.75" Throughwall (2a) = 0.36" a = 0.18" Sub-surface 1.20"-

_ 0.36"

~~' D

- - ;$
::-N--18 Exam 44 Ind. #2 @~1 58.900

Examination #44 Indication #2

  • A Am.m l~

0 0 t'CO Cn

?

UC i*11--i. .

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-19 Attachments

%Rumf ISwT CUSTOMER NOTIFICATION FORM i rLTY lSITE: CNIF iio:

annesses Valley Authority WattsBar I WBN-001 Part l

  • ISwT Findings "edXo Type otfExasmirntaka NOT Method ISwT Procedure I Rev.

368 P1SlIii vr E PT [ iKr tSwT.PDi-AUT4A1O1O S-Mar-05 3 ur a ,RTOET Cornvnnts During the Inservicexamninatlon of Outl-t Nozzleto ShellWeld N-1S, 2flaw Indications war detected.

The Indications were sized and evaluated to ASME Section Xl, Paragraph IWO-3000 and determined to be acceptable.

Ehamrinelon Rererence:

Sumrary Record 300013 Examination No. 43, Resolution Record 020001 SsigntureoaISwT ReRtentiv , Dae

$z RA EL- 18-Mar-08

,f U- Part II - Customer Notification

'otfitjcation Aknmwie edby Date:

Part III - Indication Ofsposition by Customer Not Required.

Signatur oCusforner.tepraentive: Dale Part iv Reexamination cofnentr Not Required.

Reexanintion

Reference:

inalse Date:

CiW Closed lCuetolner ftepre tative Sign. Deft:

/ 7- 3 1ow5TFOKtM NDE-e3 02 V* S71i)

E4A-43

III SOUTHWEST TECENOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitsmant: Watts Bar Weld Identification: BPV-NIS ?ro/iRevlchSICNl: ISwT-FDI-AUT4/WOIO N.: 4 Project No.: 04-0368 WeldDiibs: Otli-t-h7t22-(4- DeviceCnefCgaration- WAT-NO72N-O001 4S Med.CoeL' 30 ScEaaPath Drwl. SFNOZOUm Dabt IExrailatlaa Time rTemperturejIF Dat Acquisition Operator (s) SNT Level: D.ftllnjan IN /JI 06 S l Startrchad00 Ibd 1St 1ud End

. 1727 1 1743 76 76 Data Acquisitom Scan:

Scan Controller Parameters Coltroller.

Incrnmelt Mode:

PaR Head Rotate BocanxtuiFieLicat AutomaticScm loreentAxis Lwr Limut Limit InYAT Conversion Counts Puanned e5.42 107.42 1.00 100 Actual S5.42 107.42 Scanh LowrLimit limit Resolution Convesion Courts PAamed 124.00 185.04 0.20 100 Actual 124.00 IR5.04 l Potiua Pareuwasetn heanDirection:

Transoducr Size:

Code%ofOvdapn:

Nutsero(Scans:

Twd 22mm x 45mm NtA 23 LI San Motion: Ri-diTectional ConvesionUnits Inldes Conversion Units Derees BooRm ePitionc 22.00 0.o~t Co1tion Dewiit ins In. 140 50 Hoist g Nnzzlk CIL.3.9S El C odul Paraeter 30 Cal 201 Clibron Re rds niatio Not:

Sinay i I.__e Da e?0 DirT S-el Lei C-Chanl On. PAt6-L + 90-00(dem) ; 000(in) 1200201 CaneiZ2 On PA16-S () + 90-00(deg) + 0,00(in) 120020i 212 Qnatei3 Off N/A NtA N/A N/A N/A Channei 4 Off N/A -N/A NtA N/A NIA _Examinn houRn Rmrks:

rhennet 5 Offf A N/A A WV N/A / NIA Cbmnee6 Off N/A NtA N/A NtA N/A Channe[ 7 Off N/A }UA NtA NIA N/A Channei S Off N/A iNtA NtA N/A N/A Data Arstyisis Incrfent &ScanPositious/Actsl Recordable loditation Anali tReeairks 9SI No.3 iaIun= Posilion l ScanPosition Yes No NMAAttachent i2-2 n Srt

%-L () skyl Start Siop Channel I 0 3- 0 3 Yes ?O Mt 1.23 85Q4 107.42 124.00 IS5.00 Caaad 2 0 31- 0 F-urlerEnlustion

_ Chnad 0 EiRequiredt

_Channei 4 3] 3 l -i Yes E NO Chsannl5 C lArchive,.ptCNo.:

_ tbnnd6 i'nIV hmad 7 L 7 R Re*sT eC No.:

=Channdl C 0 Ela F slyst I SNi 1eavel 1Ulte 0\

I Lon -I 61 e-k -C))fl tswr rran"N \v

_1_ M SOUTHWEST TECHNOLOGIES

-T_ AUTOMATED ULTRASONIC EXAMINATION RECORD

{

0 Sitsff/tP t Waths Bar Wdld Idettiation: RPY-NI3 ruRtav/1mnW/CN: ISWT-PDI-AUT4/0 amnntiNo 4S Proect N.: 040368 Weld Descrlion: Octxta5ih 2r lW-U2 DefreCsfmrotlon WAT-NOZC O01 Examination N.: 46 Mod.Cwt. 30 Scn Path Drawia SPNOZOUT Esn Date Examination Time Ssrlaee Tenwo ea *F Data Aequsiato Operator (s)ISNTLevul: D, Rt. KleaJta/Il 06Ma2005 20 Start 180 s6trt 76 CD Data Acquisition Scan Controller Paraneters lanrement Axis Planed Aea Scan Axis Planned Aclusi J ositional Paremeters Contreoler. PaR LowerLnilt 85.42 85.42 LowerLioit 184-00 184.00 JBea Direction: Twid Sean: Head Rotate UpperLimit 107.42 107.42_ UpperLinit 245.04 _ 245.04 TrasducerSiem 22mm x 45mm 0,

CP2.tz Inceenat Boons Eitead hIement jnteawl 1.00 Resolution 0.20 lCode % of Oviop: MIA Mode Automatic Scan Conv~esionCounts 100 Conventirn Counts 100 Numaber ofScans'. 23 CD ScanMotion: Bi-dirtcionda Conversion Units Inches Conversion Units Degrees jooMRgtstpomitimo 22.00 Coetien: Deft Radius In. 14.50 iHoist @Norzle C'L U3.98 0 0 MndnlaPsratauerr 30 Ca11201 Calibration Records: jEXasmination Notet CD Saie

_ Aa Dieciij-. StaAOffa SU. O'ffI0i - "

Clni4en I On PA16-L - + 90.00(ded + 0.00(in) 1200201 C:Ihanocl2 on PA16-S - + 90.00(de + 0.OO(in) 1200201 Px, Chunnel3 Off NtA N/A NMA N/A NIA CD Channel 4 Off N/A N/A N/A N/A NtA Elamination Remarks: CD a,;,

Channel 5 Off N/A N/ N/A N/A NtA Chalnel 6 Off N/A N/A N/A N/A NtA Channel 7 Off N/A N/A N/A N/A NtA Chanel S Off N/A N/A NMA N/A NtA CC)0 0.0 tz Data Analysis 1'IQ (E z rincmeat d Scan Foslitors Actual Recordable ladlealluns __ _ Analyst Remarks Scon c.us) Position I Sn Position Yes No NM Attiehowt:

Slent Stop Start Stop Channel I D'

. E J]Yes la No 1-23 85.42 107.42 184.00 243.04 Chwuncl 2 C. ii r lurthcrEvaluation Channel 3 C n o rquired:

_ _ C lh4nel C 3 E E] Ye (a No

_ _ ____Channel5 C i0 ArObivet DNo.:

_ _ hwnde6 r_ O El

._=_ Channe 7 C 0 Ei Analysis T Pe/CD N.:

Aalyt I SNI Level IDte: -A 1M~o t\AMrCAs 23105

=rTvt UT" .

\K- _

_ m SOUTHWEST TECHNOLOGIES lump AUTOMATED ULTRASONIC EXAMINATION RECORD SiWtlmlant: utsWBd t tdetiliton:

RPV-NI1 Pro/Bev/Cbi CN: ISwT-PDI-AUT4/0/0/0 ProedtNsj 04-036C Wdd Descriftiful OutNoSh 2? 22r24.1-30 DIce Confruratin: 'WAT-NOZCON-0001 47 Mted.Co.: 30 ScneathDfrawtnl. SPNOZOUT XxamtDate I Exaalsadoo Time sureTmeraoT Data Acquisition Operator (0/SliT Lvet: D.R. K injan I l 06 March 2005 S14rt 1EJ 9brt l E n Datb Acquisition IS1l4' 1 IS25 76 1 76 9.

Scan Controller Parameters Incement Atis flauned Actual Sca Axis Planned Actual Positinsl Paranetero Controller PaR LowerLimit 85.42 35.42 LowerLinmit 24400 24400 Beam Direction: Twd Sner Head Rotate Uper Limit 107.42 107.42 Upper Limit 305.04 305.04 Transducer Siz= 22mm %45mm Increment Boom Extend Inlacrementnrvel 1.00 Resolntion 0.20 Cudo%ufOvculnp: N/A Modc. Aulornatic Scan Conversion Counets 100 Conversion Counts 100 NumberofSctas: 23 Scan Motion: Bi-directional Conversio Uzib Incies Conversion Units Dere8es RoOm Reoste Positionm 22.00 Correction: Dcsfu!t Radius It, 14.50 Hoist @ Nozzie CtL 33.9t Module Paraueters: 30 Cod201 lExainai Cdibrncords: Notes:

Set:. ,a.... .. = .. flw.OF e.f of.E.f WEAring C0anncl I On PA16-L - + 90.0(do + 00.(in) 1200201 Channel 2 Oan A16-S (- + 90.00(d) + 0.00(in) 1200201 Channcl3 Off N/A N/A N/A N/A N/A Channel 4 Off NIA N/A N/A N/A N/A Elxamination Remnaks:

Channel 5 Otf N/A N/A NiA N/A NWA Channel 6 Off N/A N/A NiA N/A N/A Chanel 7 OIT NWA N/A NiA N/A N/A Chammolt Off N/A N/A N/A N/A N/A Increment A Scan Positions Adual Incrnert Position Sen Pditin Yes No Data Analysis Recordable Indiealions N/A

Attachment:

AnalystRemarks co CD 1

C-.4 t3 ScanN() Stat SLOP Stat Stop aamnci I 0 El 0 D Yes El No 1-23 85.42 107Q2 244.00 305.94 Channel 2 0 L3 0 Further bsaluation 5: L Channel 3 fl (1 Ieqoirm:d W ainol4 0 n o 0Yes 1 No Channel5 0 0 01 ArchivcT pdCDNo.; 4 tTj Channel6 0 0 1 I.-,

Chemnn17 0 0[ aAbsiseTrpCD No.:

_Channel8 0 0 _ _ _ _ _ _ _ _

Analyst I SlT I teDate1 1 M rck "r Tr d itt. tame.IO U) \ -to I

-fIH SOUTHWEST TECHNOLOGIES i AUTOMATED ULTRASONIC EXANMATION RECORD Siterflant Watts Bar Weld Identiflletioa: BPV-N18 ?ro/PReviChV CN: ISwT-PDI-AUTr410l10 EYnunntioa Nod 48 PreetNnL: 0440368 Weld inewrit o : o -oSh2(3o4.36 Devic Coet rn*oa WAT-NOZCON-OO.t _Examination Ked.CoaE: 30 _8an Path Drawiox: SPNOZOUT ESam Data i laaimnnatoe Time SaffrcT1npeR!E*Y Data Acquisition Operator (s) I SNT Levvii D. P. 1(iinjan Ill 06 March 2005 Std En Start 183'3 16446 7 I.

Data Acquisition Scan Controller Patraeters Increment Axis rina.ed Artud Scan Auis lanned Actual Positional Parneter Controller. PaR LowerLiait 85.42 r5.42 LowecrLimit 304.00 304.00 Beam Direction: Twd SI... Head Rotfte UperLimit 107.42 107.42 Upperlimit 3.00 366.00 Tandcer Size: 2mm x45mm Increment BoomExtend IucreutInterval 1.00 Resolution 0120 Code%ofOvertop: N/A Mod0(c' AutomalicScan COnVersiOn Counts 100r Conversion Counts 100 1NumberofScuws 23 Scan Motion: BI-directional Conversionlinits Inches Conversion Unis Degrees Boom Rotate Positiow 22.00 Corectionc Deault RIAdiusle. 14.50 H{oist ( NozIe CtL 3.98 Module Pranmetere: 30 Cal 201 Calibtion Records! Exaination Nozts:

Stanzs,;vr Aa rs..

. ': ':A-0 Chaumel I On PA16-L + 9000(do 0.00(in) 1200201 Channel2 Oe PAl6-S + 9. 0dcK + 0.0(1n) 1200201 Ctalux 3 Off N/A N/A NtA N/A N/A Chalmd 4 Off N/A N/A N/A N/A N/A Easaanlation Remarks Channel 5 Off N/A N/A N/A N/A N/A Channdc6 Off N/A N/A N/A N/A N/A (Imuad 7 Off N/A NtA NIA N/A NtA Chmmetl a Off N/A NtA N/A N/A N/A Data Analysis Increment & Scan Posttlons Actual Recordable Indieatlow Analyst Remarks Sea Wos Incrrt IPositi;D Scan 'osition Yes No N/A A r.SE Olaut i

_ __ Stout stop5 Start stop Clhonel I 0 0 DYee 0 No _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

1-23 85.42 10742 304 00 366.00 Channci 2 0 0 Funhr Evaluation _

Clc n c 3 n 21 Rewuired:__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

CAs ChannOl 4 0 21 0ThYes 0 No Chaonel 5 0 0 2 Archive l/CD No.:

_Chnnel 6 0 ffOLG Chan 7El_ 0 2i a Ta esilqd/CDNo.:

_ ChennelI 0 2 o AnlstdIStTLevellDate li mrr r > wr s RRS.}

A1 I1 SOUTHIWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitelPlaat: WattsBar IWeldeHfiicatio: RPV-NI8 PrtJRev/CiffCN: ISwT-PDI-AUTl/YO/IA2 Rzansluttlo No.: 49 PrejectNo.: 04-0368 VWdId Detcriptia: 0Ou1ctNoto- 47' 2 Dgvice Configration: WAT-wALCoN.ODOI Mod.CoaL: 09 Sca; rPath Drawist SPNOZOUT Exam Datae I ruminain Tinme Surface Ten peratre F Data AcquisitienOperator (a)i SNT Level: David P.. lKelaJS/ n1 Start L ]Ed Start End 1137 1148 78 78 Scaa Controller Parameters lnrement Asia Pleamed Actual SensAxis Planned Actual Pmlsteioal Parameters Controller PDA Lower liUit 223i 2594 Lower Limit 90DO 9000 Beam Directjio Cw/Ccw Scan: arornfrarenmil U Jiot 295 S 2955 limi 9000 9000 Transducer Size: 1.00 Ineremet ldiai Increment Interval 90 DC1 7 Code % ofOverlap: 10 Mode Automatti Scan Conversion Comts I00 Conversion Comte 100 Nober ofScons 9 S Mionsr Mao Dl-directional Conversion Uaits Inches Conversion Units Degice Head Rotate Posotio 0.09 Correctionr Default _u_ In. 85.43 Hoist (Pivet Point): N/A Module Paranete: iY Ca 33 Calibtratian Reords: Exaaeinstla Notes:

Stetes Ant-e Diracties Scan totset Sten Offset WAT-33 [Cbecfor limntations duetothe oroxLitity/confiurxationofthe -4 Chnmeil I On 55 ( ) 7.53(n) - 1.05n) 0803301 outletnozzleint extension.

Channel 2 On 55 (4) 4 7.53(in) 1.05(m) 0803302 Channel 3 00 SLIC40 (H - 9.953 - 2.87(in) 0803303 Channel 4 On SXC 40 (+) + 9.95(in) - 2.87in _ 0803304 Exsaminaton Remarks: on Channel S 3 On OL 45) - 10 in -_122( 0803305 Nozzle Cen Hoidt Poition -8 9i auodl 6 Om N/A N/A N/A NIA N/A Boam Rotate 'vzdeCenterPrsition -2200 Channel 7 Off N/A N/A NIA N/A NIA Limited examination due to the oxim ofilien outlet rnzie Channel Off N/A NIA N/A //1A NVA +/-a ext an. Nozzle offset 40-d ej .K Increment h Scan Psitios Actul Recordable Indicaltions A______________

Incremert Position San Position Ygsa No NU Attedanent:

Scn No.(s) St Stop Stao S_ Channel I O _ °Yes 0 No 5 -9 2594 2955 9000 9000 Channci2 3 Ei O Fwuther Evaltion Channel 3 0 0 0 Requirted Channel4O i3 E 0 Cles_ ey __No Channed 0 E E ArchdveTape/CNo Chamedl6 0 0 13 7A/B Channe 7 03 l Analysis Tape/CD No:

C =__8 03 03 0 N/A Analbst ISNT Level Bt Date-x - x c awrroatn M..urea(1f1- )

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 Amenican Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief I-ISI-19 Attachments Page I of 2

'xamn Number 49 Watts Bar Unit 1 RPV-N18 Outlet Nozzle to Shell e 22 Deg cursor Box 1 of 1 Scan Axis 90.76 - 92.93 21.16 - 24.76 Inc. Axis Depth In Material 6.63 - 7.79 Channel 1 Module Coordinates Inc. Axis 25.86 - 29.45 Scan Axis 102.18 - 104.35 Channel 2 Module Coordinates Inc. Axis 25.86 - 29.45 Scan Axis 79.36 - 81.53 Channel 3 Module Coordinates Inc. Axis 27.63 -

Scan Axis 101.13 - 103.30 Channel 4 Module Coordinates Inc. Axis 27.63 -

Scan Axis 80.41 - 82.58 Channel S Module Coordinates Inc. Axis 25.86 - 29.45 97.84 - :00.01 Scan Axis Channel 5 Feature Analysis Summary Comments No recordable indications chs 1, 2, 3, & 4.

('4 ,Z.~~~rcj\ .2Do E4A-49

p-f11 l SOUTHWEST TECHNOLOGIES QiJM, AUTOMATED ULTRASONIC EXAMINATION RECORD Site/lplnt: Watts Bar IWeldedntification: RPV-NIS Prn/Raewtch l¶: ISwT-PDI:AUTfI0/0!i&2 ExanaedaNo.; so Pro aetNi.% 04-0368 WldDesripton OutletNoz-o-Sh 220 borvie, Co.aration: WAT-WALCON-0001 Mnd.Con-L: o0A S Facts P rawtg SPNOZDUr Eass Date Eamination Time Surface Ten peratur IF Daa Acquisition Oper()/ SWT level: Curiae M. Harren / m Kelly Daigle iN/A 13Mr-Stbrt Ed Start End D t rt0930 1021 78 78 Scan Controller Parameters Tanee t Axis Flanmed Actual Scan pslanned Actual Peitlans Parameters us Coutroler. PaR. Lower Limit 500 500 LowerLimit 17S1 2226 BeernDirection: Twd/Aeuy Scan: Radial UfLertlnt 36615 24835 Upcr Limit 3310 3478 Transducr Size: 1.00 iaent: a fbrential Iseresunt Interval 155 DCI 4 Code % ofO~verlap 10 Mode Automatic Scan Conversion Cwont 100 Conversion Counts 100 NumberofScans 234 ScatMotit Bi-direclional Conversion Units Degrees ConvcrsionUnits Inches Head RotatePesida. 0.00 oectin Dcfault. Radius h. 88.19 FlHoist (Pivot Point): N/A M sdulParomateors CSA Cal 34 Calibration Reeordr: fEambatbo Noe.: 51.

Status AntHe Direction Scam OWet Step Offset WAT-34 Iieck lb rlimitatim due to thc proximityI ounigu6rtitn ofthe Channel I OiT NtA NA N/A N/A N/A outlct onozleintegrl extension.

Channel 2 Off N/A NWA N/A VA NtA Channel 3 On SUC 40 1.72(in) + 2.00(in) 0803403 Channel 4 On SUC 40 - -1.72m) - 2.00(in) 0803404 xuminationRemarks:

Channel S On SUC 40 + .720m) + 0.00(in) 0803405 Nozzle Hoist (atline .8398 Chnnel6 Off NtA NA N/A NIA N/A NozzicroBoanfoatnCenterlino-2200 tanel 7 Off NtA NtA N/A MA NtA Lbeited examination de to the proxii of the outlet noazle itent Channe l Off N/A NA N/A WA NWA Cxtsion. Partial exsnminatio. 1/0 tz Inerement & Scan P sitions Actual Recordable lndlcatllns Analyst Bemarkts Samenesn)t Position Scan Poition Yes No N/A t O Yce5ne1N Scan No.(S) Start S Stop rlt sto Channecl I1 E Iff D3yes 0 No 1-15t S00 2A435 2226 3478 Channel 2 O O3 i Further Evaluedtia, Channel 3 0 El Required: ..

Channel4EO 13 0 OYes 13 No

__ .aan5 0t A E3 AE° diveTapclADNo.:

CanntI6C ha_ _6 3 0 2 a 1OA/B Chsonel 7 0 Cl A Analysis Tape/CD No.:

Analyst/S fSNe L I, R 0evel D fe:

Channel S O3 NtA IWI WMN t ca (R.Ates2 I

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Inspection Program Request for Relief 1-1SI-19 Attachments xam Number 50 Page l of 1 Watts Bar Unit 1 RPV-NQ8 Outlet Nozzle to Shell e 22 Deg Cursor Box 1 of l Scan Axis 25.02 - 26.26 Inc. Axis 36.00 - 49.95 Depth In Material 1.45 - 2.01 Channel 3 Module Coordinates Inc. Axis 34.44 - 48.40 Scan Axis 27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis 37.55 - 51.50 Scan Axis 27.94 - 29.18 Channel 5 Module Coordinates Inc. Axis 36.00 - 49.98 Scan Axis 25.54 - 26.78 Channel 5 Feature Analysis Summary Comments No recordable indications chs 3, 4,

& 5.

Reviewed By ,Y SNT Level F Date IMarcd 2.OS E4A-5 1

__in_ 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitamilsat: WattsBar edIdentlfcatlon: RPV-N I8 Prn/RevKg1CN: IrwT-PDI-AUTI/0/I1&2 ExaminatioeN.: 50 Project~e.e 04-0361 _WelIDe-Srt eha: OutletNoz-t-Sh.S 22' tcevCooratio,: WAT-WALCON001 MosLCsE: 08A _a ls Path Drawiax: SPNOZOUT EXxan -Date Exmnb aatboxlime Surfice Temperture f Dats AequWMOpearatr(v)/SNTLeveh CaresP&.amea/m KallyDalig/N/A Mar-05 090 10E2d S7rt E nd Controlter PAR Lower Limit 500 24370 LowerLimnit 1878 2226 BeanDirection: Twd/Awy Sear: Radial UpperLimit 36615 36615 TUperLIrnl 3310 347t Tarasducer Size: 1.0 Increment: Cirutmferential Incerremt Inteval 155 D 4 Code % of Oveap: 10 Mode: Autonatic Sc CeareaCoarvertb 100Ci ns 100 Number of Sano.: 234 Scan Motion: Bi-diredional Coversion Units Degeas Cenven Unitsad IRtatepPosboee 0.00 Correction: Default Raius In. 8.19 Hoist (Pivot Point): N/A to 00

- Modal Parameters: 0SA Cal 34 Calibratle. Records: Ezamioafai Notes:

States A.tle Direction Scan Offsat Step Offal WAT-34 Cioc for limnitations due to theproximity/ conrigir on of the Channel I Off MA NM/A N/A N/A N/A outlet nozzle bicgral extension.

Chane 2 Of N/A NA N/A N/A NIA ___

Channel 3 On SUC 40 - - 1.72(in + 2.00( rl) 0803403 Channel 4 On SUC 40 (- 1.72(mn - 2. a(I) 0*03404 Esasiation Remars: Cl Channel5 On SUC40 + .172(inj +0.00(i) 080340S NozzleHoist Centerline- 8391 I.45OO Channel 6 Off IVA N/A NMA NtA N/A Nozzle Boom Rotate Centerline -2200 CFhnel 7 Off INA N/A NA NA NVA Limited examination due to the prxmit ofthe outle nozzle integra -

Channel 8 Off NtA _ A N/A MA NtA (/3 nctansionL Partial examination. Boom rotate ofet 4e -

_____[arement AtSca. Positionus Actual Racordabla ladicatioes Anals Remarks s InC t P Saiti yes Yes No NA Aittacment: Ca -*

Scan lo( Start Sa S st I ChannIellO O iA Yes i. No 155 -233 24370 3665 2226 3478 Chasnel 03 0 FutherEvaluation

_______ ___Channel 3 0 M 0Required: ("3 C__ann__4 _la_3 Yes YO i No

_Chaml 53 0 (a 0 Areive TapRCD No:

hane6 0 I____ 0 121 lMAI

.Channel C 7 0 103Analysis Tape/CD No.:

_Ctuas l4 0 Ej 13 N/A Analyst / SNT LeYeI / Dale:

on UT 13 m55ar5A o.S vrgouORN W.su[ )

Enclosure 4 Watts Bar Nuclear Plant (WBN) Unit 1 American Society of Mechanical Engineers (ASME)

Inservice Lispection Program Request fior Relief 1-ISI-19 Attachments exam Number 50a Page 1.of 1 Watts Bar Unit 1 RPV-N18 Outlet Nozzle to Shell

  • 22 Deg Cursor Box 1 of I Scan Axis 25.02 - 26.26 Inc. Axis 36.00 - 49.95 Depth In Material 2.45 - 2.01 Channel 3 Module Coordinates Inc. Axis 273.04 - 286.97 Scan -Axis 27.94 - 29.18 Channel 4 Module Coordinates Inc. Axis 276.13 - 290.03 Scan Axis 27.94 - 29.18 Channel 5 Module Coordinates Inc. Axis 274.65 - 288.28 Scan Axis 25.54 - 26.78 Channel 5 Feature Analysis Summary Comments No recordable indications ohs 3, 4,

&F S.

Reviewed By L V\ SN- Level _ Date la r7 rZ.o E4A-53

ENCLOSURE 5 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

INSERVICE INSPECTION (ISI) PROGRAM VENDOR EXAMINATION AREA COVERAGE REPORT

Enclosure 5 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Vendor Examination Area Coverage Report EXAMINATION A]REA COVERAGE REPORT FOR WATPS BAR NUCLEAR PLANT This appendix describes examination coverage achieved during the 2005 in-service inspection of the Watts Bar Nuclear Plant ractor pressure vessel (RPV). The examinatipns were performed using automated ultrasonic (AUI) scanning equipment and AtUT data recording/analysis systems. The target scope of the RPV examinations included 100 percent of the accessible weld and/or component length of the following:

1) Circumfcrcntial shell welds, including the vessel shell to flange weld
2) Lower head meridional shell welds
3) Nozzle to shell welds
4) Nozzle to Safe End and Safe End to Nozzle Welds Limitations were encountered at Wats Bar while examining the vessel, nozzle to shell, and lower head shell welds due to various physical conditions, such as the bottom head penetrations, the core barrel lugs, the outlet nozzle integral extensions, the inlet nozzle inner radii, and the flange configuration. Typically, limitations are not encountered on the nozzle to safe end and safe end to nozzle welds, except for severe inside surface contour variations, which were not encountered at Watts Bar.

I Examination Coverage Requirements for Vessel Circumferential and Meridional Welds The ISwT procedures for shell weld examinations are qualified for both single- and double-sided examinations. The double-sided technique, requiring two examination angles and four search units, is used when access is not restricted. Ihe single-sided examination technique, requiring three examination angles and four search units, is utilized to provide additional coverage when access is restricted. The examination coverage requiremnents for these techniques are described below.

Sinrie-Sided Examination (Reflectors Oriented Parallel and Transverse to the Weld)

1) The inner 3.25 inches including the weld metal and adjacent base metal for % t either side of the weld fusion lise must be completely scanned with both SLIC40 (50 and 70 degrees, shear and longitucinal waves) search units.
2) The weld metal and adjacent base material in the outer volume beyond 3.25 inches must be completely scanned with both 45° and 550 Duplex (45 and 55 degrees shear wave) search units.

Double-Sided Examination (Reflectors Oriented Parallel and Transverse to the Weld)

1) The inner 3.25 inches including the weld metal and adjacent base metal for % t either side of the weld fusion line must be completely scanned with both SLIC 40 search units.
2) The weld metal and adjacent base material in the outer volume beyond 3.25 inches must be completely scanned with both 55° Duplex search units.

E5-1

Enclosure 5 Watts Bar Nuclear Plant (WBN) Unit 1 American Society Of Mechanical Engineers (ASME)

Inservice Inspection Program Vendor Examination Area Coverage Report 2 Examination Coverage Requirements for Nozzle to Sheli Welds Examination of the nozzle to shell welds is performed using the techniques described above from the vessel inside surface plus a PDI-qudified Phased Aray examination performed from the nozzle bore. Coverage requirements for nozzle to shell weld examinations conducted from the vessel inside surfice are similar to those described above, except that the weld metal and adjacent base material for K" beyond the weld fusion line must be scanned with the applicable search units. The Phased Array procedure was designed to swep two sets of sound beam angles (5 through 40 degrees longitudinal wave and 35 through 45 degrees shear wave) through the examination volume from the nozzle bore and achieve fiul coverage.

3 Examination Coverage Requirements for Nozzle to Safe End and Safe End to Nozzle Welds (Dissimilar Metal Welds)

Examination of the Safe End (Dissimilar Metal) welds is perforned using a PDI-qualified Phased Array procedure that is designed to sweep one set of sound beam angles (60-88 degrees longitudinal wave) through the examination volume from the inside surface of the weld to achieve full coverage in four directions.

EXAMINATION COVERAGE CALCULATION The following contains a description of the examination coverage calculation process:

1. Determine the examination scan ("x" and 'yJ)coordinates necessary to obtain 100% of the required weld coverage (reference the examination planned "x" and'y' coordinates).
2. Multiply the delta difference of the planned axl and "y" coordinates by each other to determine the planned scan area necessary to obtain 100% of the required weld coverage for both transverse and parallel examinations.
3. Multiply the delta difference of the actual "x" and y coordinates by ekch other to determine the actual scan area for both transverse and parallel examinations.
4. Divide the parallel actual scan area by the parallel planned scan area and the transverse actual scan area by the transverse planned scan area to determine the coverage percentage for each typ of examination.
5. Compute the average of the parallel and the transverse examination values for the final coverage percentage, E5-2

Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage

.,Sunmmiar ~.k&Wiqd um . I i (D

3000D1 W03-04 Lower Shell -to- SLIC 40155- Parallel 2 directions 94% Limited erxamrnation due to the Lower Middle Shell SUC 40155 Transverse 2 directions 100% proximity of the core barrel stabilizing 0 r Averaga 97% 7ugs.

300002 W04-05 Lower Middle Shell SUC 40I55 Parallel 2 directions 100%

-to- Upper Middle SUC 40'55 Transverse 2 directions 100%

Shell Averaoe 10_% tzi 300003 WOS-06 Upper Middle Shell SLIC 40f55* Parallel 2 diredions 93% Limited examination due lo the

-to- Upper Shell SLIC 40'55' Transverse 2 driections 100% outlet nozzle integral extensions and Average 97% inlet nozzle bore radiL 300026 W02-03 Hot1orn Head -to- SLIC 40655 Paralel 2 directions 76%°f Limited examination due to the Lower Shell SLIC 40155 Parallel 2 directions 68% proximitfy odthe core barrel stabilIzing 1_0 300028

_ _ __ _ _ _ _ _ __ __ _ __ __ , er sg e 72 jug s .

WOt-02 Bottom Head Cap SLIC 40W551 Parallel Ft Un 2 directions 64% Limited examination due to the

-to- Bottom Head SLIC 40/55- Transverse 2 directions Il 67% bottom heed penetrations.

Spherical Ring Average 60%/

300006 vi06407 Upper Shell SLIC 4ft55 Parallel 2 directions 100% Limited examination due to the

-to- Range SUIC 40'55 Transverse 2 dIrections 0) r 89% flange design.

300033 W2A Lower Head

_A_ _ _ _ _

verage 95% _ _ _ _ _ _ _ _ _ _ _ o) o 0 rt SLIC 4@55 Parallel 2 directions 88% Limited exaninalion due l the o  : H Meridional 0 o SUC 415 Transverse 2 dections 70% bottom heed penetrealtons end core Average (D

300008 79% barrel stablizing tugs.

W2B Lower Head SUC 48t55 Parallel 2 directions 95. UmLiled examination due to the 0)

Medional e 6W SUC 4055- Transverse 2 directions 82% bottom head penetrations and core 300009 Average 84% barrel stabilizing lugs.

W2C Lower Head SUIC 40/55- Paralel 2 directions 85% LImited examination due to the Medrilonal 0 120 SUC 40I5 Transverse 2 directione (3 85% bottom head penetratons and core 300034 vV20 Lower Head Average 85% barrel stabilizing luge. oD H SUIC 40/55- Parallel 2 directions 85% Limited examination due to the Merdional 0 180 Suc 40/55 Transverse 2 directions ii -~

85% bottom head penetrations and core Ft r 30001 t W2E Lower Head Average 85% barrel stabilizing lugs. cW SLUC 40155- Parallel 2 directions 78% LUmited examIniathon due to the Merdional 0 240 SLIC 40t55 Transverse 2 directions 61 % bottor head permrations and core Avefa 69% barrel slablhizing lIgs.

300012 W2F tower Head SLIC 40W55 Parallel 2 directions 73% LImited examination due to the Meridional 0 300 SLIC 40/55- Transverse 2 directions 81% bottom head penetretlons and core

____Avae I__ 67% barrel stabilizing kegs.

Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage Summary .Yltr WelId. . l a 300013 N-1e Outlet Nozzle SUC 40 Parallel 2 diredins 0 Lmited examination due to th rozle

-to. SheS C 22 SLIC 40155 Transverse 2 directions 51% Irlegrl extenson. (D H-PA18 Paralel (Bore) I direclion 100%

300014 N-14 Aveage 75%

Inlet Nozzle SUC 40 Pa l 2 direWions

-to- Shel 6or 96. Lmited examination due to the nozzle SLIC 40155 Transverse 2 directions 100%

PA-IS inner radlus.

Parallel (Bore) I directIon 100%

300101 N-12 Ave"ge 99% r31 Inlet Nozzle SLJC 40 Parallel 2 directions

-to- Shell a 113- SUC 40t55- 96% Limited examiatllon due to the nozzle Tranverse 2 directions 100% Inner radius.

PA-I8 Parallel (Boe1) I direction 100%

tZl ... ._._Average CY, 300016 N-17 Outlet Nozzle S9%

SLIC 40 Parallel 2 diredions 100% Unmted examination due to the nozzle n P)t t

-to- Shell @158W SLIC 4QF55- Transverse 2 directions 51% Integral eodension.

PA-IS Parallel (Bare) I direction 100%

__ _ __ _ __ __ __ _ _ _ _A 300017 v errage 76%

N-1 Outlet Nozzle SLIC 40 Parallel 2 directions 100% LUmited iasmination due to the nozzle (D-F 4oShel / 202' SUCA4W55 Tnsvere 2 directions 51% Inlegral extension.

PA-kt6 Poarle (Bore) 1 direton 100%

_ _ _76%

- H 3D0018 N-13 indet Nozzle SSUC 40 Average_ _ _ _ _ _ _

Permlkl 2 dirmctons 96% LUmited examination due to the iozzle

-to- Shell 6 247 SLIC 40t55 Transverse 2 directions 100% iner radlus.

PA-i6 Parallel orel I direction 100% 03-300019 N-11 inlet Nozzle Aerge 99 H-SUC 40 Parallel 2 directions 96%

-to-Shell @ 293' SUC 40W55 LUtlmed sxaminatlon due to the nozz Transverse 2 directions 100% Inner radius.

PA-S10 paraipd (Bore) I dlrecion 100%

300020 N-iS Outlet Nozzle Average 99% _

SLIC 40 P Irallel 2 directions 100%

-to- Shell @ 338' Llrnted xnanaon due to the nozzle SUIC 40W55 Transverse 2 directions 61% ntegrl extension.

PA18 Parallel (Boe) 1direction 100%

Average 7Te%

I-Watts Bar Nuclear Power Station 2005 Reactor Vessel Inservice Examination UT Coverage 300058 N-181-E Outlet Nozzle PA 22 Parallel 2 directions 100%

-b.l.pe 22' PA22 Trantsverse 2 directIons 100% 0 Average 100%

300054 N-14-SE Elbow -to- Inlet PA 22 Parallel 2 directions 100% l-jt nr Nozzle 4 Or PA 22 Transverse 2 direcdons 100%

_ Average 100%

300052 N-12-SE Elbow -to- Inlet PA 22 Parallel 2 directions 100%

Nazze 113 PA22 Transverse 2 direrDons 100%

_ Average 100%

300057 N-17-SE Outlet Nozzle PA 22 Parallel 2 directIons 1O0Y%

O-Pipe @ 158 PA 22 Transverse 2 directlcns 100%

Average 100% 0 300056 N-1S-E Outet Nozzle PA22 Parallel 2 directions 100%i 0 Ln (PT -to-Pipe @ 202 PA 22 Transverse 2 directions 100% 4 Average 100% (D 300053 N-13-SE Elbow -to- Inlet PA 22 Parallel 2 diredto, 100%

Nozzle @24r PA 22 Transverse 2 directions 100%

_ Average 100%

300051 N-11-SE Elbow-to- Inlet PA22 Parallel 2 directions 100%

Nozzle C 293- PA 22 Transverse 2 diractons 100%

Ave__ge 100% (D 300055 N-15-SE Outlet Nozzle PA 22 ParaIlel 2 directione 100% 11 rt

-to-Pfpe 4 338 PA 22 Transverse 2 dIrections tO0X En, Average 1O0%

oIo F_

CD En Prepared by.

SNT Level:

Date:I a ;Z, C)C) S 7

ENCLOSURE 6 WATTS BAR NUCLEAR PLANT (WBN) UNIT 1 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

INSERVICE INSPECTION (ISI) PROGRAM ISI DRAWINGS TO SUPPORT RELIEF REQUEST 1-ISI-17, 1-ISI-18, AND 1-ISI-19

1. Drawing ISI-0427-C-01
2. Drawing ISI-4027-C-06 E 6-1

lEFERENCEORAWINGS I a V!qTEGt-eo P NAL MATERIAL SPECIFICATIONS SEESMfEC6 p

ASff CC-t (EOJIALENT)

(D (D

MoTEs rt I. W4-05, S ABELTLINE REGIf 6J DO.

0 Fh HC rt H

3. FORCONTINVATISNS OF MAINL"CY (D1H (QD I)

REACTOR COANT PIPING SEE 0 O

4. THIS ORA WINO SERIET SUPERCEDES DW.4B51-A OfEETS f TO 7.

Mt i I z W H- (DOrt t- tt cn t cE H

PS CJ11.

H (t I-_j Hrtt

-OUTLETNOME EWDS 1'O NIt NI6 CO H1 Q Fl N~i En Mtl HO C12e MQL 1_ a rCA 1_ LUV cn"

_ _MflTS I-L L O I1 .. .Le I

H1 I Hl-LL1. A~L ja to~rt , Rfl w er to (D

I WATTSI A NMULfrA PL AN I ReACTro VESSEL (StAN KE/ DS)

I..,_,.,,, ,,,#

I;e

- FI¢4~At sDfif

-r. A. I ISIt-0427-C-at D

REFERENCEDRAWINGS VENOMTEOWICALJANUAL SEAL RV MANlALV t TRACTNO. 71CR2-54f11-I FLANGE SU1R DM5AOFS30'738-jreS If(15.7

'755-153U4(F15.7.2)

FT0. '. If

-IJI.22'R NOW. SW) NOZZLEREFEOEi SE I .420 700NO

' 'LXQOPP 2 N 2-SE lA7TERIALSPEtIIFICA7TIC WAs (D SHELL LoOw4.4 NI -SE SA-50f CL. 2 Ii 6 02 0 REF LOVERREAD (li SA-"NJ OR. O Ct. I lINLETy DELA1 NO2ZLE INLET/OUTLET Un sA- OB CL. 2 rt ASNEOU-t (CfQUIVALENT)

SE 0FF (D -

t. WELOLOCATIONS DI&NsCtONS ARE TO WELDC. H
2. REACTOR VESSELwa23'ZLsoPE OE To PIPE wdcn 0 pi 2 LD IDO'SARE SHOW rN RC MAINLOOP 0 (D"-

ON-2547-6. THESEAREAWJESECTIOW XI (DDP EXAM CAIGSORY 8-J. PIPE WELDS.

(I...RCF-M-1-) H- tj

-3. REACTOR VESSEL. Nl2LE TO SAFE EW EWD (Dh- H.'< Z TO'$ SHOWOINTHIS DOOAREASW1 $ECT1ONd Xi EXAMCArTEGoy -F, DISSIMILAR E7TAL t-b 0)

WELDS.I. Nte-SE)

SU ttFPPORT ETlRfLUCrt1JRECalPUSNT 10. )

H J.U)

W) (D A

I H- H H- 2(D

(-1 tH, j F-F C)-13 91, Hrt 0 t rt H0 CH I C Hr H

F-O

'0 rH

' L I£a 1r¢1_k-

  • trI'jtr Ain:-

40000 - ;A C A@ ; rr

.! rr I O S Il ill. AI Arr UE) F-TDA*S' VALLEY AUWhOATY WATTS BAR NUCLEAR PLANT DETAILA (SIX-/IA-CC AT-TACWZAT

) UNIT F REACTOR VESSEL 14

( E SPOfrr SUIDE INTERIOR VIEW SEE NOTE 4 A g11 Pr t rJf Jrrr Lr.

77:

~.on00, as I JS1-O457-n-06 t7

Retrieved from "https://kanterella.com/w/index.php?title=ML060300405&oldid=2587675"