JAFP-08-0109, Submittal of the Final Ultrasonic Test Results on the N2C-SE Weld Overlay: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
Line 16: Line 16:


=Text=
=Text=
{{#Wiki_filter:--- -Entergy Entergy Nuclear Northeast Entergy Nuclear Operations, Inc.James A. Fitzpatrick NPP P.O. Box 110 Lycoming, NY 13093 Tel 315-342-3840 JAFP-08-0109 October 20, 2008 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555  
{{#Wiki_filter:Entergy Nuclear Northeast Entergy Nuclear Operations, Inc.
James A. Fitzpatrick NPP
  ---- Entergy                                                          P.O. Box 110 Lycoming, NY 13093 Tel 315-342-3840 JAFP-08-0109 October 20, 2008 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555


==SUBJECT:==
==SUBJECT:==
James A. FitzPatrick Nuclear Power Plant Docket No. 50-333 License No. DPR-59  
James A. FitzPatrick Nuclear Power Plant Docket No. 50-333 License No. DPR-59 Submittal of the Final Ultrasonic Test Results on the N2C-SE Weld Overlay


==REFERENCES:==
==REFERENCES:==
: 1) Entergy Letter to NRC, JAFP-08-0102, "James A. FitzPatrick Request for Relief (RR-7 Revision 1) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs", dated October 1, 2008


Submittal of the Final Ultrasonic Test Results on the N2C-SE Weld Overlay 1) Entergy Letter to NRC, JAFP-08-0102, "James A. FitzPatrick Request for Relief (RR-7 Revision 1) -Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs", dated October 1, 2008
==Dear Sir or Madam:==
of reference 1 documented commitments to submit to the NRC, within fourteen days of the completion of the final ultrasonic test (UT) on the weld overlay proposed in the subject relief request, the following:
: 1) Weld overlay examination results including a listing of indications detected;
: 2) Disposition of indications using the standards of ASME Section Xl, Subsection IWB-3514-2 and/or IWB-3514-3 criteria and, if possible, the type and nature of the indications; and
: 3) A discussion of any repairs to the weld overlay material and/or base metal and the reason for the repairs.
In summary the weld overlay repair was performed to N-2C-SE per work order 00106631 and Relief Request RR-7. No repairs, to the weld overlay material and/or base material, were required. Ultrasonic Examination of the weld overlay was performed per ASME Appendix VIII requirements (see Enclosure 1). The examination identified no recordable indications and noted the original axial flaw as previously identified in the original examination. No indications required evaluation to ASME Section Xl, Subsection IWB 3514-2 and/or IWB-3514-3 criteria. of this letter contains a copy of the GE Hitachi Examination Summary, Report No.
08UT175.
There are no new commitment made in this letter and the final commitment made in reference 1 will be completed as scheduled.


==Dear Sir or Madam:==
Enclosure 2 of reference 1 documented commitments to submit to the NRC, within fourteen days of the completion of the final ultrasonic test (UT) on the weld overlay proposed in the subject relief request, the following:
: 1) Weld overlay examination results including a listing of indications detected;2) Disposition of indications using the standards of ASME Section Xl, Subsection IWB-3514-2 and/or IWB-3514-3 criteria and, if possible, the type and nature of the indications; and 3) A discussion of any repairs to the weld overlay material and/or base metal and the reason for the repairs.In summary the weld overlay repair was performed to N-2C-SE per work order 00106631 and Relief Request RR-7. No repairs, to the weld overlay material and/or base material, were required.
Ultrasonic Examination of the weld overlay was performed per ASME Appendix VIII requirements (see Enclosure 1). The examination identified no recordable indications and noted the original axial flaw as previously identified in the original examination.
No indications required evaluation to ASME Section Xl, Subsection IWB 3514-2 and/or IWB-3514-3 criteria.Enclosure 1 of this letter contains a copy of the GE Hitachi Examination Summary, Report No.08UT175.There are no new commitment made in this letter and the final commitment made in reference 1 will be completed as scheduled.
JAFP-08-0109 Page 2 of 2 If you have any questions or require additional information, please contact Mr. Eugene Dorman, Acting Licensing Manager, at 315-349-6810.
JAFP-08-0109 Page 2 of 2 If you have any questions or require additional information, please contact Mr. Eugene Dorman, Acting Licensing Manager, at 315-349-6810.
Sincerely, Eugene Dorman Acting Licensing Manager ED/ed cc: Mr. Samuel J. Collins, Regional Administrator U.S. Nuclear Regulatory Commission, Region 475 Allendale Road King of Prussia, PA 19406-1415 Office of NRC Resident Inspector James A. Fitzpatrick Nuclear Power Plant P.O. Box 136 Lycoming, New York 13093 Mr. Paul Tonko, President New York State Energy Research and Development Authority 17 Columbia Circle Albany, New York 12203-6399 Mr. Bhalchandra Vaidya, Project Manager Plant Licensing Branch U.S. Nuclear Regulatory Commission Mail Stop O-8-C2A Washington, DC 20555 Mr. Charles Donaldson, Esquire Assistant Attorney General New York Department of Law 120 Broadway New York, New York 10271 Mr. Paul Eddy New York State Department of Public Services 3. Empire State Plaza Albany, NewYork 12223-1350 Enclosure 1 to JAF-08-0109 James A. Fitzpatrick Nuclear Power Station Docket No. 50-333 GE HITACHI EXAMINATION  
Sincerely, Eugene Dorman Acting Licensing Manager ED/ed cc:
Mr. Samuel J. Collins, Regional Administrator     Mr. Bhalchandra Vaidya, Project U.S. Nuclear Regulatory Commission, Region       Manager 475 Allendale Road                               Plant Licensing Branch King of Prussia, PA 19406-1415                   U.S. Nuclear Regulatory Commission Mail Stop O-8-C2A Office of NRC Resident Inspector                 Washington, DC 20555 James A. Fitzpatrick Nuclear Power Plant P.O. Box 136                                     Mr. Charles Donaldson, Esquire Lycoming, New York 13093                         Assistant Attorney General New York Department of Law Mr. Paul Tonko, President                         120 Broadway New York State Energy Research and               New York, New York 10271 Development Authority 17 Columbia Circle                               Mr. Paul Eddy Albany, New York 12203-6399                       New York State Department of Public Services
: 3. Empire State Plaza Albany, NewYork 12223-1350
 
Enclosure 1 to JAF-08-0109 James A. Fitzpatrick Nuclear Power Station Docket No. 50-333 GE HITACHI EXAMINATION  


==SUMMARY==
==SUMMARY==
SHEET REPORT No. 08UT175 Report No.: HITACHI EXAMINATION  
SHEET REPORT No. 08UT175
 
Report No.:
HITACHI                                     EXAMINATION  


==SUMMARY==
==SUMMARY==
SHEET 08UT175 Site: Fitzpatrick Component ID: N2C-SE Outage: RFO18 WELD OVERLAY System: 02-2 ASME Cot.: B-F ASME Item B5.10 Aug Req N/A vj .......-I-Exams Performed 45' RL 70' RL_o0* Long...-Data Sheet Cal Sheet i Procedure.. .... ........ -,i .D-106 D-105 D-104 D-103 N/A N/A N/A N/A. -ENN-NDE-9.29 Ve./Rev 1 ENN-NDE-9.29 Ver/Rev 1 ENN-NDE-9.29 Ver/Rev 1 ENN-NDE-9.29 Ver/Rev 1 Calibration Block CAL-DPTH-070 CAL-DPTH-070 CAL-DPTH-070 CAL-DPTH-070 Scott Erickson Scott Erickson Scott Erickson Scott Erickson Exam / Oper, Cert Leve Personnel III HIl Ill.i Date!10/4/2008 10/4/2008 10/4/2008 1o0/4/2008 Examination Results: During the Manual Ultrasonic Examination of the above referenced componenL no new ISI or PSI recordable indications were detected utilizing a 0*, 700 RL, and ODCR RL for the PSI portion and 450 RL for the SI portion of the exam.No change observed to the thru-wall height (0.51') of previously recorded flow prior to weld overlay repair.100% of the code required volume was examined.This UT Examination meets the 2001 Edition of ASME Section xi with the 2003 Addenda and is in accordance with Appendix VIII 2001 Edition as amended and mandated by 1OCFR50 Amended Requirements, Final Rule dated October 1, 2004 Examination results were compared to Data Report N/A from: N/A -Change These examinations were performed under Work Order: 00125346 No Change This Summary and the following data sheets have been reviewed and ac/ed by the following personnel:)RWRP N/A N7 10 -& Dose: 251 mr.Prepared By- Level: Date: UtiIit Date: ANII Review. Date: Page 1 of 6 0 ý HITACHI Ultrasonic Calibration and Examination Record Manual Piping and Components I.Site/Unit:
SHEET                                           08UT175 Site:                           Fitzpatrick               Component ID:                                 N2C-SE Outage:                               RFO18                                                                 WELD OVERLAY System:
Fitzpatrick/i Outage: RFO18 Report Number.Data Sheet Number: Linearity Sheet 08UT175 D-106 L-007 Prncpdijrp ENN-NDE-9 29\.UILk iAAU nJt fn.AA 01 6LJW~A. f'A _ I~- Procedur ENN-N--.-9.
vj .......
ss FLAT Material Size* Ultra gel /II0 Couplant Couplar 261732 95 Thermometer S/N Cal T 2.0" Calibration Thick Initial Cal: 22 iCal Check it batch Cal Check-emp. Final Cal: Cal Time i105 1314 1400 Ver/Rev: 1 RTD Manufacturer-0.45 Incident Point: 2.0 MHz Frequency:
02-2                 ASME Cot.:       B-F         ASME Item         B5.10     Aug Req                   N/A
DRR: N/A Search Unit Data 01-107 Serial Number 45.Nominal Angle: 2(8x14) mm/Rect.Size/Shape:
-I
45.Measured Angle: DAC Construction Scan Direction Ax Cal Reflector
    - Exams           Data Sheet               Cal Sheet i         Procedure               Calibration Block        Exam / Oper,    Cert Leve
.8"SDH Signal Amplitude:
                                                                                                                                                      . i Date Performed                                                                                                              Personnel
80%Signal Sweep: 5.40 Div Signal dB: 27.1 dB Sweep 0-10= 2.000 in Metal Path Calibration Verification Field Simulator Block S/N; CAL-RHOM-117 Reflector NSDH NIA Amplitude 40% NIA Gain (dB) 27.1 N/A Sweep (SD) I 22 .1A Acceptable Linearity performed
                    .. . . .. . . . -. . ...    .
: 12 Exam Data for Weld: N2C-SE TRL2-Aust Style: RL Mode: 2 Elements: Search Unit Cable RG-174 Cable Type: 1Z Length: 0 Connectors:
                                                ,i III        !10/4/2008 45' RL                D-106                 N/A        ENN-NDE-9.29 Ve./Rev 1          CAL-DPTH-070            Scott Erickson D-105                  N/A       ENN-NDE-9.29 Ver/Rev 1         CAL-DPTH-070            Scott Erickson                      10/4/2008 70' RL                D-104                  N/A        ENN-NDE-9.29 Ver/Rev 1         CAL-DPTH-070           Scott Erickson          HIl        10/4/2008
Instrument Settings Panametrics
_o0*Long...-              D-103                  N/A. -     ENN-NDE-9.29 Ver/Rev 1          CAL-DPTH-070           Scott Erickson         Ill         1o0/4/2008 Examination Results:
/ Epoch 4 Manufacturer/Model:
During the Manual Ultrasonic Examination of the above referenced componenL no new ISIor PSI recordable indications were detected utilizing a 0*, 700 RL,and ODCR RL for the PSI portion and 450 RLfor the SI portion of the exam.
7.615eus Zero: 02318 in./usec.Velocity: 031534305 Serial Number.0.8-3.0 Narrowband Filter: Sq. i Max Pulser/Energy:
No change observed to the thru-wall height (0.51') of previously recorded flow prior to weld overlay repair.
Auto Fullwove 2.000 in Rep Rate: Rectification:
100% of the code required volume was examined.
Range: 400 Ohms Damping: 0% 2.0 MHz Dual Reject: Frequency:
This UT Examination meets the 2001 Edition of ASME Section xi with the 2003 Addenda and is in accordance with Appendix VIII2001 Edition as amended and mandated by 10CFR50 Amended Requirements, Final Rule dated October 1, 2004 Examination results were compared to Data Report                             N/A             from:       N/A                                       -   Change These examinations were performed under Work Order:                               00125346                                                             No Change This Summary and the following data sheets have been reviewed and ac/ed                               by the following personnel:
Mode: WELD OVERLAY Configuration:
                                                                                                                                          )RWRP             N/A N7         10     -&                                                                 Dose:         251     mr.
120* F 261732 Exam Temp. Exam Thermometer Exam Comments / Limitations:
Prepared By-                                       Level:     Date:     UtiIit                                       Date:
Exams performed to maintain a 5% to 20% noise level.?&9i ~ ~ 4, FWoav'P " 00 Exam Surface: Axial Circ Circ Circ c .Scot Initials:
ANII Review.                                 Date:           Page   1       of   6
Examiner: Initials:
 
Examiner 2: U-PST Scan-ald I Recordable Exam DNST Indications I Angle UPSr 3 NRI 4?-ONST 3 3.1 NRI 45" UPST 39.1 NRI :45 Em-- -- i "E~am StartL DNST 39.1 NRI 450 EricksonI Level: GE Reviewe By: N/A N/A Utility Rey .Level: 10/4/2008 ANII Review.--  
0           ý HITACHI Ultrasonic Calibration and Examination Record Manual Piping and Components                                             I Report Number.            08UT175
-1252 Exam End: 1314 Level: Date: Date: Dote initial Col/Exam Date: Page 2 of6 HITACHI Ultrasonic Calibration and Examination Record Manual Piping and Components I'Site/Unit:
.Site/Unit:         Fitzpatrick/i                                                                                       Data Sheet Number:         D-106 Outage:          RFO18                                                                                                Linearity Sheet            L-007 Prncpdijrp         ENN-NDE-9 29
Fit-zptrick/1 Outage: RF018 Report Number.Data Sheet Number: Linearity Sheet 08UT175 D-105 L-007 Calibration Data for Block: CAL-DPTH-070 Procedure:
    \.UILk   iAAU       nJt fn.AA 01     6LJW~A.f'A _     I~-                                 Procedur           ENN-N--.-9.
ENN-NDE-9.29 55 FLAT 2.0" i Calibration Material Size Thick Initial Cal: Ultrael 06225 Col Check Couplant Couplant batch Cal Check 261732 95*F Thermometer S/N Cal Temp. i Final Cal: Cal Time 1237 1251 11407 Ver / Rev: 1 RTD Manufacturer:
Ver/Rev:        1                  DRR:    N/A ss              FLAT          2.0"     Calibration       Cal Time Material            Size        Thick       Initial Cal:                                                   Search Unit Data i105
0.5 incident Point: DRR: NIA Search Unit Data 04-392 Serial Number ODCR Nominal Angle: 2('1045) mm/Rect.Size/Shape:
* Ultra gel /II0                              22    iCal Check Couplant              Couplar it batch                                                         RTD                    01-107              2(8x14) mm/Rect.
80.Measured Angle: DAC Construction 2.0 MHz 85rRL2-Aust Frequency:
Cal Check-       1314                 Manufacturer-          Serial Number                  Size/Shape:
Style: RL Mode: 2 Elements: Scan Direction Cal Reflector Ax.1'501-Search Unit Cable Signal Amplitude:
261732                      95 Thermometer S/N                Cal Temp.            Final Cal:       1400                        0.45                         45.                        45.
80%Signal Sweep: 3.80 Div Signal dB: 35.7 dB Sweep 0-10= L500 in Metal Path Calibration Verification RG-174 Cable Type: 6L 0 Length: Connectors:
Incident Point:             Nominal Angle:            Measured Angle:
Instrument Settings Ponametrics  
DAC Construction 2.0 MHz         TRL2-Aust                RL                  2 Frequency:            Style:              Mode:            Elements:
/ Epoch 4 Manufacturer/model:
Scan Direction                      Ax Cal Reflector                    .8"SDH                                                                              Search Unit Cable Signal Amplitude:                  80%
Field Simulator Block S/N:.Reflector i Amplitude Gain Sweep (ISD)NSDH 80%31.4 6.1 CAL-RHOM-117 N/A N/A N/A; -"N/A ..9.825 us Zero: 02311 in./sec.Velocity: 031534305 Serial Number: 0.8- 3.0 Norrowband Filter: sq. / Max Pulser/Energy:
RG-174                  1Z                0 Signal Sweep:                  5.40 Div                                                                    Cable Type:            Length:         Connectors:
Dual Mode: Auto Fullwave L500 in Rep Rote: Rectification:
Signal dB:                       27.1 dB Sweep 0-10=               2.000 in         Metal Path                                                               Instrument Settings Calibration Verification                                                     Panametrics / Epoch 4                    031534305 Manufacturer/Model:                  Serial Number.
Range: 400 Ohms 0% 2.0 MHz Damping: Reject Frequency:
Field Simulator Block S/N;               CAL-RHOM-117 Reflector             NSDH                 NIA                           7.615eus            02318 in./usec.                    0.8-3.0 Zero:                   Velocity:               Narrowband Filter:
Acceptable Linearity performed:
Amplitude              40%                  NIA Gain (dB)              27.1                N/A                            Auto          Fullwove              2.000 in           Sq. i Max Sweep (SD) I              22                  .1A                      Rep Rate:      Rectification:             Range:         Pulser/Energy:
9118 Exam Data for Weld: N2C-SE WELD OVERLAY Configuration:
400 Ohms             0%               2.0 MHz             Dual Acceptable Linearity performed :               12 Damping:          Reject:          Frequency:          Mode:
Exam Comments / Limitations:
Exam Data for Weld: N2C-SE WELD OVERLAY                                                           Exam Comments / Limitations:
i Exams performed to maintain a 5% to 20% noise /de/l.#&&j~4JSW0 A-7 / M.g 00 Exam Surface: 120° F 261732 Exam Temp. Exam Thermometer Axial Circ Ax Ax Circ Circ UPST I Scan dB Recordable Exam S DNST Indications Angle (UPST 37.7 NRI 80 DNST 37.7 NRI 807 LIPST 37.7 NRI i8-Exam Start: DNST 37.7 NRI 80 Scott Erickson III er. Level: GE eied B y N/A N/A er 2: Level: utility Rev e: 10/4/2008 ANI Reve.1237 Exam End: 1251 Initials-Examin Initials:
Configuration:                                        Exams performed to maintain a 5% to 20% noise level.
Exomin Initial Col/Exam Dot Level: Date: Date 1/./, e" Dote: Dote: Page 3 of 6 0 HITACHI ,a, Ultrasonic Calibration and Examination Record Manual Piping and Components I (.. Site/Unit:
00                          120* F                    261732                          ?&9iFWoav'P
Fitzpatrick/1 Outage: RF018 Report Number Data Sheet Number: Linearity Sheet 08U T175 D-104 L-007 Calibration Data for Block. CAL-DPTH-070 SS FLAT 2.0" Calibration Cal Time Material Size Thick n Cal: .. .*initial Cal: ;,1108* ; iCal Check- 1218 Couplant Couplant batch Cal Check 1236 261732 95° F Thermometer S/N Cal Temp. Final Cal: 1405 DAC Construction i Procedure:
                                                                                                                ~         ~           4,             "
ENN-NDE-9.29 Ver/Rev: 1 DRR- N/A Search Unit Data RTD 87-296 Manufacturer:
Exam Surface:                   Exam Temp.            Exam Thermometer Axial U-PST       Scan-ald     I Recordable       Exam Circ                      DNST                     Indications I Angle UPSr             3               NRI           4?-
Serial Number 0.35 Incident Point 2.0 MHz Frequency:
ONST           33 .1             NRI           45" Circ                      UPST           39.1 --*          NRI
70*Nominal Angle: 2f(x844 mm/Rect Size/Shape:
                                                                            --     :45 i
70" Measured Angle: 2 Elements: 70'TRL2-Aust Style: RL mode: Scan Direction Cal Reflector Signal Amplitude Signal Sweep: Signal dB:.5" SDH 80%5.70 Div Search Unit Cable RG-174 Cable Type: 12'Length: 0 Connectors:
* Em StartL "E~am                   1252              Exam End:            1314 Circ                      DNST           39.1             NRI           450 c      .                    Scot EricksonI Initials:    Examiner:                                  Level:             GE Reviewe By:                               Level:      Date:
Sweep 0-10 =47.1 d8 2.500 in Metal Path Calibration Verification Instrument Settings f Flie Id Simulator Block S/N: co Reflector NSDH i Amplitude 80%Gain (dB) 47.1 1Sweep (SD) 3.8 Acceptable Linearity performed:
N/A                         N/A Utility Rey     .                             Date:
Exam Data for Weld: N2c-SE WELD OVERLAY Configuration:
Initials:      Examiner 2:                                Level:
AL-RHOM-117 NIA N/A NIA N/A'anametrics
initial Col/Exam Date:                  10/4/2008                             ANII Review.--     -                                             Page 2        of6 Dote
/ Epoch 4 Manufacturer/Model:
 
0.231 in.jJsec.velocity: 9.275 uis Zero: Auto Rep Rate: 400 Ohms Damping: 031534305 Serial Number.0.8- 3.0 Norrowband Filter Fullwave Rectification:
Ultrasonic Calibration and Examination Record HITACHI                                                    Manual Piping and Components Report Number.            08UT175 I
2.500 in Range: sq. / Max Pulser/Energy:
'Site/Unit:       Fit-zptrick/1                                                                                     Data Sheet Number:         D-105 Outage:          RF018                                                                                            Linearity Sheet            L-007 Calibration Data for Block:                 CAL-DPTH-070                                     Procedure:       ENN-NDE-9.29 Ver / Rev:    1                DRR:      NIA 55            FLAT         2.0"     i Calibration       Cal Time Material           Size         Thick       Initial Cal:                                                     Search Unit Data Ultrael                     06225             Col Check 1237                        RTD                    04-392                2('1045)mm/Rect.
Dual Mode: 0% 2.0 MHz Reject Frequency:
Couplant           Couplant batch Cal Check         1251                    Manufacturer:          Serial Number                  Size/Shape:
Exam Comments / Limitations:
261732                    95*F Thermometer S/N               Cal Temp.         i Final Cal:       11407                         0.5                     ODCR                          80.
Exams performed to maintain a 5% to 20% noise levo.4~ T' 2A ~ (Kfs -IL I _OD Exam Surface: 120° F 261732 Exam Temp. Exam Thermometer Axial UPSTI Scan Circ DNST 1 Ax UPST 49.Ax NST 49.Circ UPST 49.Circ DNST 49.Scott Erickson Initials:
incident Point:           Nominal Angle:              Measured Angle:
Examiner.N/A Initials:
DAC Construction 2.0 MHz       85rRL2-Aust               RL                  2 Frequency:           Style:             Mode:           Elements:
Examiner 2: .d Recordable Exam Indications Angle 1 ! NRI 70°NRI 70" 1 NRI 70 Exam Start: S NR i 70.Level: GE RevieGwed By N/A Level: Utility Rev .ANII Review.1218 Exam End: Level: C Date: Dote: late: 1235 Initial Col/Exam Dote: 101412008 Page 4 of 6 I ....HITACHI !:Site/Unit Fitzpatrick/1 Outage: RFO18 Calibration Data for Block: CAL-DPTH-070 Ultrasonic Calibration and Examination Record Manual Piping and Components I Report Number. 08UT175 Data Sheet Number 0-103 Linearity Sheet: L-007 Procedure:
Scan Direction                   Ax Cal Reflector                 .1'501-                                                                             Search Unit Cable Signal Amplitude:               80%
ENN-NDE-9.29 55 FLAT 2.0" 'Calibration Cal Time Material Size Thick initial Cal: i Liltragel 11 06225 Clcek 15 iCoICheck 1/152 Couplont Couplant botch -o t -217 26132 5FCal Check 11217 261732 95/N Cal.Temp..Fin.l.Cal  Thermomete r SIN Cal Temp. 1: Final Col: 1=1402 Ver / Rev: 1 KBA Manufacturer' NIA incident Point: DRR: NIA Search Unit Data 01031 Serial Number 0*Nominal Angle:.43N.2ZlRnd.
RG-174                  6L                0 Signal Sweep:                 3.80 Div                                                                 Cable Type:            Length:        Connectors:
Size/Shape:
Signal dB:                     35.7 dB Sweep 0-10=           L500 in         Metal Path                                                               Instrument Settings Calibration Verification                                                     Ponametrics/ Epoch 4                     031534305 Manufacturer/model:                  Serial Number:
0.s A Measured Angle: Scan Direction Col Reflector Signal Amplitude:
Field Simulator Block S/N:             CAL-RHOM-117
Signal Sweep: Signal dB: DAC Construction AX.5" SDH 80%2.40 Div 37.6 dB 2.0 MHz MSEB2 Frequency:
                    . Reflector      i    NSDH                  N/A 9.825 us            02311 in./sec.                    0.8- 3.0 Zero:                  Velocity:                Norrowband Filter:
Style: Lond.Mode: 2 Elements: Search Unit Cable RG-174 12Z 0 Cable Type: Length: Connectors:
Amplitude              80%                  N/A
Sweep 0-10 = 2.000 in Metal Path Calibration Verification Field Simulator Block S/N: CAL-RHOH-117 Reflector NSDH NIA Amplitude 80% i NIA GainldB) 34.4 h-/A Sweep (SD) 1.5 N/A Acceptable Linearity performed:
                                                              ;- "N/A . .
91 008 Exam Data for Weld: Nac-SE WELD OVERLAY Configuration:
Gain *dB)            31.4                                                Auto          Fullwave              L500 in           sq. / Max N/A                          Rep Rote:     Rectification:          Range:
Instrument Settings Ponametnics
Sweep (ISD)            6.1                                                                                                    Pulser/Energy:
/ Epoch 4 Manufacturer/Model:
400 Ohms             0%               2.0 MHz             Dual Acceptable Linearity performed:            9118 Damping:           Reject           Frequency:           Mode:
9.96eus Zero: 02283 in./lsec.velocity: 031534305 Serial Number.0.8-3.0MHz Norrowband Filter: Sq. / Max Pulser/Energy:
Exam Data for Weld: N2C-SE WELD OVERLAY                                                           Exam Comments / Limitations:
Auto Fullwave Rep Rate: Rectification:
Configuration:                                        i Exams performed to maintain a 5% to 20% noise /de/l.
2.000 in Range: 400 Ohms Damping: 0%Reject: 2.0 MHz " Dual Frequency:
00                        120° F                    261732
Mode: Exam Comments / Limitations:
                                                                                                          #&&j~4JSW0 A-7           /     M.g Exam Surface:                 Exam Temp.           Exam Thermometer Axial                   SUPST DNST        I Scan   dB     Recordable Indications      Exam Angle Circ Ax                    (UPST           37.7             NRI             80 Ax                    DNST           37.7             NRI             807 Circ                    LIPST           37.7             NRI     i8
Exams performed to maintain a 5% to 20% noise level.OD Exam Surface: 120* F 261732 Exam Temp. Exam Thermometer Axial UIPST Scan cB Recordable I Exam_xCirc DNST Indications Angle Ax UPST 43.6 NRI o" Ax ...NT .43.6 NRI..Exam S tort: 1W58 Exam End: 1216 Scott Erickson Initials:
                                                                                      -       Exam Start:           1237              Exam End:            1251 Circ                  DNST            37.7             NRI             80 Scott Erickson                     III Initials-    Examin er.                             Level:             GE eied           B     y                 Level:        Date:
Examiner.N/A Level: GE Revie~ed By N/A Level: utilyRv ANII Revie. .-.-_, Level: Dote:/o/ A"/, /, Date: Date: Initials:
Date1/./,      e" N/A                         N/A Dote:
Examiner 2: Initial Col/Exam Dote: 10/412008 Page 5 of 6 SHITACHI Weld ID: N2C-SE Lo Location:
Initials:    Exomin er 2:                           Level:             utility Rev Initial Col/Exam Dot e:               10/4/2008                           ANI Reve.                                                         Page    3      of 6 Dote:
Toa Dead Center Ultrasonic Examination Indication Report.. Data Report Number: Cal Data Sheet Number 08UT175 D-106 1252 1314 Site: Fitzpatrick Procedure:
 
ENN-NDE-9.29
Ultrasonic Calibration and Examination Record 0
/ 1/N/A Size: FLAT Thickness:
                  ,a,           HITACHI                                                     Manual       Piping     and Components Report Number                08U T175 I
2.0" Drawing: MKS-003 Wo Location:
(.. Site/Unit:
Weld Overlay Centerline Exam Start: Exam End: Weld Width: NI/A Weld Height: NIA Ind Angle % of I _ndication Lenth I W Distance I Metal Path. Ax I Circ Upst/ I No. Used DAC I U I L Max I L 2 WI WMax I W 2 P 1 I MP Max 1 MP2 Dnst Comments: 1 45 30 -.4 1 0 +.4 N/A _ _..5_ ý, N/A 1.538 233 N/A Circ CenterlineTWS=0.51" no change In thru-woll size from pre-WOR exam 108UTOi.------ !location for flow signal tip.ill. Transducer ISketch~fScott Erickson Examiner III 101412 GE Revi Level: Dote: Utility Review: Level: Date: Date: 1 ANII Review: Pa Dote:'6 of_6}}
Outage:          Fitzpatrick/1 RF018 Data Sheet Number:
Linearity Sheet D-104 L-007 Calibration Data for Block.                 CAL-DPTH-070                                   i Procedure:          ENN-NDE-9.29 Ver/Rev:        1                DRR-      N/A SS              FLAT         2.0"     Calibration         Cal Time Material           Size       Thick       n
                                                        *initial Cal:
Cal:        ..
                                                                          ;,1108     .                                      Search Unit Data
                  *;                  o*s            iCal Check- 1218 Couplant             Couplant batch                                                           RTD                    87-296                    2f(x844 mm/Rect Cal Check           1236                     Manufacturer:            Serial Number                    Size/Shape:
261732                     95° F Thermometer S/N               Cal Temp.           Final Cal:         1405                         0.35                          70*                            70" Incident Point            Nominal Angle:                  Measured Angle:
DAC Construction 2.0 MHz          70'TRL2-Aust                  RL                  2 Frequency:            Style:                mode:            Elements:
Scan Direction Cal Reflector                  .5" SDH                                                                                  Search Unit Cable Signal Amplitude                80%
RG-174                  12'                  0 Signal Sweep:                 5.70 Div                                                                    Cable Type:             Length:          Connectors:
Signal dB:                     47.1 d8 Sweep 0-10 =           2.500 in       Metal Path                                                                     Instrument Settings Calibration Verification                                                         f'anametrics / Epoch 4                      031534305 Manufacturer/Model:                    Serial Number.
FlieId Simulator Block S/N:           coAL-RHOM-117 9.275 uis              0.231 in.jJsec.                      0.8- 3.0 Reflector           NSDH                 NIA Zero:                    velocity:                  Norrowband Filter i   Amplitude           80%                 N/A Gain (dB)           47.1               NIA                              Auto            Fullwave                2.500 in            sq. / Max Rep Rate:      Rectification:            Range:            Pulser/Energy:
1Sweep (SD)             3.8               N/A 400 Ohms              0%                2.0 MHz              Dual Acceptable Linearity performed:                                                                        Reject              Frequency:          Mode:
Damping:
Exam Data for Weld: N2c-SE WELD OVERLAY                                                               Exam Comments / Limitations:
Configuration:                                           Exams performed to maintain a 5% to 20% noise levo I _OD                    120° F                    261732                                                      .4~ T'   ~
2A      (Kfs          -    IL Exam Surface:               Exam Temp.             Exam Thermometer Axial                    UPSTI      Scan d        Recordable          Exam Circ                  DNST    1 Indications        Angle Ax                    UPST          49. 1      !      NRI              70° Ax                      NST          49.
NRI            70" Circ                  UPST          49.
1 NRI          70      Exam Start:             1218              Exam End:               1235 Circ                  DNST          49.       S      NR      i      70.
Scott Erickson Initials:     Examiner.                             Level:               GE RevieGwed By                              Level:          Clate:
N/A                        N/A Level:              Utility Rev    .                              Date:
Initials:     Examiner 2: .
Initial Col/Exam Dote:              101412008                                                                                                      Page    4      of 6 ANII Review.                                  Dote:
 
I  ....
HITACHI                          !
Ultrasonic Calibration and Examination Record Manual Piping and Components Report Number.              08UT175 I
:Site/Unit          Fitzpatrick/1                                                                                         Data Sheet Number          0-103 Outage:          RFO18                                                                                                Linearity Sheet:           L-007 Calibration Data for Block:                   CAL-DPTH-070                                      Procedure:         ENN-NDE-9.29 Ver / Rev:      1               DRR:       NIA 55            FLAT          2.0"      'Calibration          Cal Time Material            Size        Thick      initial Cal:       i                                                Search Unit Data Liltragel 11                06225              Clcek iCoICheck            1/152 15 Couplont            Couplant botch            - o              t    -217 KBA                  01031                  .43N.2ZlRnd.
Manufacturer'            Serial Number                  Size/Shape:
261732 26132                5FCal Cal.Temp..Fin.l.Cal 95/N                    Check      11217
                                                                          *4-2 Thermomete r SIN                Cal Temp.          1:Final Col:       1=1402                                                                                        A NIA                        0*                          0.s incident Point:            Nominal Angle:             Measured Angle:
DAC Construction 2.0 MHz          MSEB2                Lond.                2 Frequency:            Style:              Mode:            Elements:
Scan Direction                    AX Col Reflector                  .5" SDH                                                                                Search Unit Cable Signal Amplitude:                 80%
RG-174                12Z                  0 Signal Sweep:                  2.40 Div                                                                      Cable Type:          Length:          Connectors:
Signal dB:                      37.6 dB Sweep 0-10 =            2.000 in        Metal Path                                                                  Instrument Settings Calibration Verification                                                          Ponametnics / Epoch 4                    031534305 Manufacturer/Model:                   Serial Number.
Field Simulator Block S/N:             CAL-RHOH-117 Reflector          NSDH                  NIA                            9.96eus              02283 in./lsec.                0.8-3.0MHz Zero:                 velocity:                 Norrowband Filter:
Amplitude            80%           i      NIA GainldB)            34.4                  h-/A                            Auto          Fullwave            2.000 in            Sq. / Max Sweep (SD)              1.5                N/A                          Rep Rate:     Rectification:           Range:         Pulser/Energy:
400 Ohms              0%              2.0 MHz          " Dual Acceptable Linearity performed:            91      008 Damping:          Reject:           Frequency:           Mode:
Exam Data for Weld: Nac-SE WELD OVERLAY                                                              Exam Comments / Limitations:
Configuration:                                            Exams performed to maintain a 5% to 20% noise level.
OD                      120* F                      261732 Exam Surface:                Exam Temp.             Exam Thermometer Axial                    UIPST        Scan cB        Recordable      I Exam_x Circ                  DNST                        Indications          Angle Ax                    UPST            43.6            NRI              o" Ax ...                 NT    .       43.6            NRI
                                                                                          .   . Exam Stort:           1W58              Exam End:             1216 Scott Erickson Initials:     Examiner.                               Level:               GE Revie~ed By                            Level:         Dote:
                                                                                                                              /o/ A"/,/,
N/A                        N/A Date:
Initials:     Examiner 2:                              Level:              utilyRv Initial Col/Exam Dote:                10/412008                                                                                                  Page 5        of 6 ANII Revie.      _,.-.-                  Date:
 
Ultrasonic Examination Indication Report                                                  ..       Data Report Number:         08UT175 SHITACHI Cal  Data Sheet Number      D-106 Site:   Fitzpatrick                                Procedure:       ENN-NDE-9.29 / 1/N/A Weld ID:     N2C-SE                              Drawing:   MKS-003                              Size:     FLAT    Thickness:         2.0"                                     Exam Start:   1252 Lo Location: Toa Dead Center                    Wo Location:   Weld Overlay Centerline          Weld Width:       NI/A                    Weld Height:    NIA                  Exam End:     1314 Ind    Angle    % of   I_ndication Lenth        I      W Distance          I        Metal Path.           AxI Circ Upst/      I No. Used    DAC I U I L Max I L2              WI      WMax I W 2        1P I    MP Max 1 MP2                    Dnst                                            Comments:
1      45      30    -.4 1     0    +.4        N/A _ _..5_    ý, N/A    1.538      233      . N/A
                                                                                                    ------ Circ      CenterlineTWS=0.51" no change In thru-woll size from pre-WOR exam 108UTOi ill. Transducer
                                                                                                                                !location for flow signal tip.
ISketch
  ~fScott Erickson                III  101412        GE Revi                      Level:     Dote:        Utility Review:                                 Date:     1 ANII Review:                          Dote:'
Examiner                     Level:   Date:                                                                                                                                               Pa         6 of_6}}

Revision as of 12:49, 14 November 2019

Submittal of the Final Ultrasonic Test Results on the N2C-SE Weld Overlay
ML082970190
Person / Time
Site: FitzPatrick Constellation icon.png
Issue date: 10/20/2008
From: Eugene Dorman
Entergy Nuclear Northeast, Entergy Nuclear Operations
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
JAFP-08-0109
Download: ML082970190 (9)
v • d • e


Text

Entergy Nuclear Northeast Entergy Nuclear Operations, Inc.

James A. Fitzpatrick NPP

Entergy P.O. Box 110 Lycoming, NY 13093 Tel 315-342-3840 JAFP-08-0109 October 20, 2008 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555

SUBJECT:

James A. FitzPatrick Nuclear Power Plant Docket No. 50-333 License No. DPR-59 Submittal of the Final Ultrasonic Test Results on the N2C-SE Weld Overlay

REFERENCES:

1) Entergy Letter to NRC, JAFP-08-0102, "James A. FitzPatrick Request for Relief (RR-7 Revision 1) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs", dated October 1, 2008

Dear Sir or Madam:

of reference 1 documented commitments to submit to the NRC, within fourteen days of the completion of the final ultrasonic test (UT) on the weld overlay proposed in the subject relief request, the following:

1) Weld overlay examination results including a listing of indications detected;
2) Disposition of indications using the standards of ASME Section Xl, Subsection IWB-3514-2 and/or IWB-3514-3 criteria and, if possible, the type and nature of the indications; and
3) A discussion of any repairs to the weld overlay material and/or base metal and the reason for the repairs.

In summary the weld overlay repair was performed to N-2C-SE per work order 00106631 and Relief Request RR-7. No repairs, to the weld overlay material and/or base material, were required. Ultrasonic Examination of the weld overlay was performed per ASME Appendix VIII requirements (see Enclosure 1). The examination identified no recordable indications and noted the original axial flaw as previously identified in the original examination. No indications required evaluation to ASME Section Xl, Subsection IWB 3514-2 and/or IWB-3514-3 criteria. of this letter contains a copy of the GE Hitachi Examination Summary, Report No.

08UT175.

There are no new commitment made in this letter and the final commitment made in reference 1 will be completed as scheduled.

JAFP-08-0109 Page 2 of 2 If you have any questions or require additional information, please contact Mr. Eugene Dorman, Acting Licensing Manager, at 315-349-6810.

Sincerely, Eugene Dorman Acting Licensing Manager ED/ed cc:

Mr. Samuel J. Collins, Regional Administrator Mr. Bhalchandra Vaidya, Project U.S. Nuclear Regulatory Commission, Region Manager 475 Allendale Road Plant Licensing Branch King of Prussia, PA 19406-1415 U.S. Nuclear Regulatory Commission Mail Stop O-8-C2A Office of NRC Resident Inspector Washington, DC 20555 James A. Fitzpatrick Nuclear Power Plant P.O. Box 136 Mr. Charles Donaldson, Esquire Lycoming, New York 13093 Assistant Attorney General New York Department of Law Mr. Paul Tonko, President 120 Broadway New York State Energy Research and New York, New York 10271 Development Authority 17 Columbia Circle Mr. Paul Eddy Albany, New York 12203-6399 New York State Department of Public Services

3. Empire State Plaza Albany, NewYork 12223-1350

Enclosure 1 to [[::JAF-08-0109|JAF-08-0109]] James A. Fitzpatrick Nuclear Power Station Docket No. 50-333 GE HITACHI EXAMINATION

SUMMARY

SHEET REPORT No. 08UT175

Report No.:

HITACHI EXAMINATION

SUMMARY

SHEET 08UT175 Site: Fitzpatrick Component ID: N2C-SE Outage: RFO18 WELD OVERLAY System:

vj .......

02-2 ASME Cot.: B-F ASME Item B5.10 Aug Req N/A

-I

- Exams Data Sheet Cal Sheet i Procedure Calibration Block Exam / Oper, Cert Leve

. i Date Performed Personnel

.. . . .. . . . -. . ... .

,i III !10/4/2008 45' RL D-106 N/A ENN-NDE-9.29 Ve./Rev 1 CAL-DPTH-070 Scott Erickson D-105 N/A ENN-NDE-9.29 Ver/Rev 1 CAL-DPTH-070 Scott Erickson 10/4/2008 70' RL D-104 N/A ENN-NDE-9.29 Ver/Rev 1 CAL-DPTH-070 Scott Erickson HIl 10/4/2008

_o0*Long...- D-103 N/A. - ENN-NDE-9.29 Ver/Rev 1 CAL-DPTH-070 Scott Erickson Ill 1o0/4/2008 Examination Results:

During the Manual Ultrasonic Examination of the above referenced componenL no new ISIor PSI recordable indications were detected utilizing a 0*, 700 RL,and ODCR RL for the PSI portion and 450 RLfor the SI portion of the exam.

No change observed to the thru-wall height (0.51') of previously recorded flow prior to weld overlay repair.

100% of the code required volume was examined.

This UT Examination meets the 2001 Edition of ASME Section xi with the 2003 Addenda and is in accordance with Appendix VIII2001 Edition as amended and mandated by 10CFR50 Amended Requirements, Final Rule dated October 1, 2004 Examination results were compared to Data Report N/A from: N/A - Change These examinations were performed under Work Order: 00125346 No Change This Summary and the following data sheets have been reviewed and ac/ed by the following personnel:

)RWRP N/A N7 10 -& Dose: 251 mr.

Prepared By- Level: Date: UtiIit Date:

ANII Review. Date: Page 1 of 6

0 ý HITACHI Ultrasonic Calibration and Examination Record Manual Piping and Components I Report Number. 08UT175

.Site/Unit: Fitzpatrick/i Data Sheet Number: D-106 Outage: RFO18 Linearity Sheet L-007 Prncpdijrp ENN-NDE-9 29

\.UILk iAAU nJt fn.AA 01 6LJW~A.f'A _ I~- Procedur ENN-N--.-9.

Ver/Rev: 1 DRR: N/A ss FLAT 2.0" Calibration Cal Time Material Size Thick Initial Cal: Search Unit Data i105

  • Ultra gel /II0 22 iCal Check Couplant Couplar it batch RTD 01-107 2(8x14) mm/Rect.

Cal Check- 1314 Manufacturer- Serial Number Size/Shape:

261732 95 Thermometer S/N Cal Temp. Final Cal: 1400 0.45 45. 45.

Incident Point: Nominal Angle: Measured Angle:

DAC Construction 2.0 MHz TRL2-Aust RL 2 Frequency: Style: Mode: Elements:

Scan Direction Ax Cal Reflector .8"SDH Search Unit Cable Signal Amplitude: 80%

RG-174 1Z 0 Signal Sweep: 5.40 Div Cable Type: Length: Connectors:

Signal dB: 27.1 dB Sweep 0-10= 2.000 in Metal Path Instrument Settings Calibration Verification Panametrics / Epoch 4 031534305 Manufacturer/Model: Serial Number.

Field Simulator Block S/N; CAL-RHOM-117 Reflector NSDH NIA 7.615eus 02318 in./usec. 0.8-3.0 Zero: Velocity: Narrowband Filter:

Amplitude 40% NIA Gain (dB) 27.1 N/A Auto Fullwove 2.000 in Sq. i Max Sweep (SD) I 22 .1A Rep Rate: Rectification: Range: Pulser/Energy:

400 Ohms 0% 2.0 MHz Dual Acceptable Linearity performed : 12 Damping: Reject: Frequency: Mode:

Exam Data for Weld: N2C-SE WELD OVERLAY Exam Comments / Limitations:

Configuration: Exams performed to maintain a 5% to 20% noise level.

00 120* F 261732  ?&9iFWoav'P

~ ~ 4, "

Exam Surface: Exam Temp. Exam Thermometer Axial U-PST Scan-ald I Recordable Exam Circ DNST Indications I Angle UPSr 3 NRI 4?-

ONST 33 .1 NRI 45" Circ UPST 39.1 --* NRI

-- :45 i

  • Em StartL "E~am 1252 Exam End: 1314 Circ DNST 39.1 NRI 450 c . Scot EricksonI Initials: Examiner: Level: GE Reviewe By: Level: Date:

N/A N/A Utility Rey . Date:

Initials: Examiner 2: Level:

initial Col/Exam Date: 10/4/2008 ANII Review.-- - Page 2 of6 Dote

Ultrasonic Calibration and Examination Record HITACHI Manual Piping and Components Report Number. 08UT175 I

'Site/Unit: Fit-zptrick/1 Data Sheet Number: D-105 Outage: RF018 Linearity Sheet L-007 Calibration Data for Block: CAL-DPTH-070 Procedure: ENN-NDE-9.29 Ver / Rev: 1 DRR: NIA 55 FLAT 2.0" i Calibration Cal Time Material Size Thick Initial Cal: Search Unit Data Ultrael 06225 Col Check 1237 RTD 04-392 2('1045)mm/Rect.

Couplant Couplant batch Cal Check 1251 Manufacturer: Serial Number Size/Shape:

261732 95*F Thermometer S/N Cal Temp. i Final Cal: 11407 0.5 ODCR 80.

incident Point: Nominal Angle: Measured Angle:

DAC Construction 2.0 MHz 85rRL2-Aust RL 2 Frequency: Style: Mode: Elements:

Scan Direction Ax Cal Reflector .1'501- Search Unit Cable Signal Amplitude: 80%

RG-174 6L 0 Signal Sweep: 3.80 Div Cable Type: Length: Connectors:

Signal dB: 35.7 dB Sweep 0-10= L500 in Metal Path Instrument Settings Calibration Verification Ponametrics/ Epoch 4 031534305 Manufacturer/model: Serial Number:

Field Simulator Block S/N: CAL-RHOM-117

. Reflector i NSDH N/A 9.825 us 02311 in./sec. 0.8- 3.0 Zero: Velocity: Norrowband Filter:

Amplitude 80% N/A

- "N/A . .

Gain *dB) 31.4 Auto Fullwave L500 in sq. / Max N/A Rep Rote: Rectification: Range:

Sweep (ISD) 6.1 Pulser/Energy:

400 Ohms 0% 2.0 MHz Dual Acceptable Linearity performed: 9118 Damping: Reject Frequency: Mode:

Exam Data for Weld: N2C-SE WELD OVERLAY Exam Comments / Limitations:

Configuration: i Exams performed to maintain a 5% to 20% noise /de/l.

00 120° F 261732

  1. &&j~4JSW0 A-7 / M.g Exam Surface: Exam Temp. Exam Thermometer Axial SUPST DNST I Scan dB Recordable Indications Exam Angle Circ Ax (UPST 37.7 NRI 80 Ax DNST 37.7 NRI 807 Circ LIPST 37.7 NRI i8

- Exam Start: 1237 Exam End: 1251 Circ DNST 37.7 NRI 80 Scott Erickson III Initials- Examin er. Level: GE eied B y Level: Date:

Date1/./, e" N/A N/A Dote:

Initials: Exomin er 2: Level: utility Rev Initial Col/Exam Dot e: 10/4/2008 ANI Reve. Page 3 of 6 Dote:

Ultrasonic Calibration and Examination Record 0

,a, HITACHI Manual Piping and Components Report Number 08U T175 I

(.. Site/Unit:

Outage: Fitzpatrick/1 RF018 Data Sheet Number:

Linearity Sheet D-104 L-007 Calibration Data for Block. CAL-DPTH-070 i Procedure: ENN-NDE-9.29 Ver/Rev: 1 DRR- N/A SS FLAT 2.0" Calibration Cal Time Material Size Thick n

  • initial Cal:

Cal: ..

,1108 . Search Unit Data
  • o*s iCal Check- 1218 Couplant Couplant batch RTD 87-296 2f(x844 mm/Rect Cal Check 1236 Manufacturer
    Serial Number Size/Shape:

261732 95° F Thermometer S/N Cal Temp. Final Cal: 1405 0.35 70* 70" Incident Point Nominal Angle: Measured Angle:

DAC Construction 2.0 MHz 70'TRL2-Aust RL 2 Frequency: Style: mode: Elements:

Scan Direction Cal Reflector .5" SDH Search Unit Cable Signal Amplitude 80%

RG-174 12' 0 Signal Sweep: 5.70 Div Cable Type: Length: Connectors:

Signal dB: 47.1 d8 Sweep 0-10 = 2.500 in Metal Path Instrument Settings Calibration Verification f'anametrics / Epoch 4 031534305 Manufacturer/Model: Serial Number.

FlieId Simulator Block S/N: coAL-RHOM-117 9.275 uis 0.231 in.jJsec. 0.8- 3.0 Reflector NSDH NIA Zero: velocity: Norrowband Filter i Amplitude 80% N/A Gain (dB) 47.1 NIA Auto Fullwave 2.500 in sq. / Max Rep Rate: Rectification: Range: Pulser/Energy:

1Sweep (SD) 3.8 N/A 400 Ohms 0% 2.0 MHz Dual Acceptable Linearity performed: Reject Frequency: Mode:

Damping:

Exam Data for Weld: N2c-SE WELD OVERLAY Exam Comments / Limitations:

Configuration: Exams performed to maintain a 5% to 20% noise levo I _OD 120° F 261732 .4~ T' ~

2A (Kfs - IL Exam Surface: Exam Temp. Exam Thermometer Axial UPSTI Scan d Recordable Exam Circ DNST 1 Indications Angle Ax UPST 49. 1  ! NRI 70° Ax NST 49.

NRI 70" Circ UPST 49.

1 NRI 70 Exam Start: 1218 Exam End: 1235 Circ DNST 49. S NR i 70.

Scott Erickson Initials: Examiner. Level: GE RevieGwed By Level: Clate:

N/A N/A Level: Utility Rev . Date:

Initials: Examiner 2: .

Initial Col/Exam Dote: 101412008 Page 4 of 6 ANII Review. Dote:

I ....

HITACHI  !

Ultrasonic Calibration and Examination Record Manual Piping and Components Report Number. 08UT175 I

Site/Unit Fitzpatrick/1 Data Sheet Number 0-103 Outage: RFO18 Linearity Sheet: L-007 Calibration Data for Block: CAL-DPTH-070 Procedure: ENN-NDE-9.29 Ver / Rev: 1 DRR: NIA 55 FLAT 2.0" 'Calibration Cal Time Material Size Thick initial Cal: i Search Unit Data Liltragel 11 06225 Clcek iCoICheck 1/152 15 Couplont Couplant botch - o t -217 KBA 01031 .43N.2ZlRnd.

Manufacturer' Serial Number Size/Shape:

261732 26132 5FCal Cal.Temp..Fin.l.Cal 95/N Check 11217

  • 4-2 Thermomete r SIN Cal Temp. 1:Final Col: 1=1402 A NIA 0* 0.s incident Point: Nominal Angle: Measured Angle:

DAC Construction 2.0 MHz MSEB2 Lond. 2 Frequency: Style: Mode: Elements:

Scan Direction AX Col Reflector .5" SDH Search Unit Cable Signal Amplitude: 80%

RG-174 12Z 0 Signal Sweep: 2.40 Div Cable Type: Length: Connectors:

Signal dB: 37.6 dB Sweep 0-10 = 2.000 in Metal Path Instrument Settings Calibration Verification Ponametnics / Epoch 4 031534305 Manufacturer/Model: Serial Number.

Field Simulator Block S/N: CAL-RHOH-117 Reflector NSDH NIA 9.96eus 02283 in./lsec. 0.8-3.0MHz Zero: velocity: Norrowband Filter:

Amplitude 80% i NIA GainldB) 34.4 h-/A Auto Fullwave 2.000 in Sq. / Max Sweep (SD) 1.5 N/A Rep Rate: Rectification: Range: Pulser/Energy:

400 Ohms 0% 2.0 MHz " Dual Acceptable Linearity performed: 91 008 Damping: Reject: Frequency: Mode:

Exam Data for Weld: Nac-SE WELD OVERLAY Exam Comments / Limitations:

Configuration: Exams performed to maintain a 5% to 20% noise level.

OD 120* F 261732 Exam Surface: Exam Temp. Exam Thermometer Axial UIPST Scan cB Recordable I Exam_x Circ DNST Indications Angle Ax UPST 43.6 NRI o" Ax ... NT . 43.6 NRI

. . Exam Stort: 1W58 Exam End: 1216 Scott Erickson Initials: Examiner. Level: GE Revie~ed By Level: Dote:

/o/ A"/,/,

N/A N/A Date:

Initials: Examiner 2: Level: utilyRv Initial Col/Exam Dote: 10/412008 Page 5 of 6 ANII Revie. _,.-.- Date:

Ultrasonic Examination Indication Report .. Data Report Number: 08UT175 SHITACHI Cal Data Sheet Number D-106 Site: Fitzpatrick Procedure: ENN-NDE-9.29 / 1/N/A Weld ID: N2C-SE Drawing: MKS-003 Size: FLAT Thickness: 2.0" Exam Start: 1252 Lo Location: Toa Dead Center Wo Location: Weld Overlay Centerline Weld Width: NI/A Weld Height: NIA Exam End: 1314 Ind Angle  % of I_ndication Lenth I W Distance I Metal Path. AxI Circ Upst/ I No. Used DAC I U I L Max I L2 WI WMax I W 2 1P I MP Max 1 MP2 Dnst Comments:

1 45 30 -.4 1 0 +.4 N/A _ _..5_ ý, N/A 1.538 233 . N/A

Circ CenterlineTWS=0.51" no change In thru-woll size from pre-WOR exam 108UTOi ill. Transducer

!location for flow signal tip.

ISketch

~fScott Erickson III 101412 GE Revi Level: Dote: Utility Review: Date: 1 ANII Review: Dote:'

Examiner Level: Date: Pa 6 of_6

Retrieved from "https://kanterella.com/w/index.php?title=JAFP-08-0109,_Submittal_of_the_Final_Ultrasonic_Test_Results_on_the_N2C-SE_Weld_Overlay&oldid=2152074"