Semantic search
Jump to navigation
Jump to search
Issue date | Title | Topic | |
---|---|---|---|
ML23353A171 | 18 January 2024 | Issuance of Amendment No. 237 to Clarify Support System Requirements for the Residual Heat Removal System and Control Room Air Conditioning System Under Technical Specifications 3.4.8, 3.7.11, and 3.9.6 | |
ML23347A121 | 11 January 2024 | Issuance of Amendment No. 236 to Adopt TSTF-501, Revision 1, Relocate Stored Fuel Oil and Lube Volume Values to Licensee Control EPID L-2023-LLA-0046) | |
ML23234A152 | 5 October 2023 | Exemption from the Requirements of 10 CFR Part 50, Section 50.46, and Appendix K Regarding Use of M5 Cladding Material (EPID L-2022-LLE-0030) (Letter) | Exemption Request Fuel cladding |
ML23240A369 | 5 October 2023 | Issuance of Amendment No. 235 to Revise Technical Specifications to Use of Framatome Gaia Fuel (EPID L-2022-LLA-0150) (Non-Proprietary) | Boric Acid Shutdown Margin Loop seal Anticipated operational occurrence Safe Shutdown Earthquake Operating Basis Earthquake Exemption Request Fuel cladding Flow Induced Vibration |
ML23228A025 | 25 September 2023 | Issuance of Amendment No. 234 to Revise Technical Specification 5.5.16, Containment Leakage Rate Testing Program, for Permanent Extension of Type a and Type C Leak Rate Test Frequencies | High winds Non-Destructive Examination Internal Flooding Probabilistic Risk Assessment Coatings Aging Management Large early release frequency Moisture barrier License Renewal Fire Protection Program |
ML23261C385 | 25 September 2023 | Safety Evaluation for Operating Quality Assurance Manual Revision 36A | |
ML23166B088 | 20 September 2023 | Issuance of Amendment No. 233 for Adoption of Alternative Source Term and Revision of Technical Specifications | Anticipated operational occurrence Finite Element Analysis Surveillance Frequency Control Program Fuel cladding Unidentified leakage |
ML22361A070 | 24 February 2023 | Issuance of Amendment No. 231 for Revision to Radiological Emergency Response Plan Regarding Response and Notification Goals | Minimum staff |
ML23019A175 | 30 January 2023 | Issuance of Amendment No. 230 to Revise Technical Specifications to Adopt TSTF-577, Revision 1, Revised Frequencies for Steam Generator Tube Inspections | Nondestructive Examination |
ML22301A007 | 2 December 2022 | Issuance of Amendment No. 229 to Revise Technical Specifications to Adopt TSTF-505, Revision 2, and TSTF-439, Revision 2 | Safe Shutdown High winds Probabilistic Risk Assessment Cyber Security FLEX Large early release frequency Maintenance Rule Program |
ML22220A130 | 21 October 2022 | Exemptions from the Requirements of 10 CFR 50.46 and 10 CFR Part 50 Appendix a, General Design Criteria 35, 38, and 41 (EPID L-2021-LLE-0021) (Cover Letter) | |
ML22220A132 | 21 October 2022 | Issuance of Amendment No. 228 Re; Revise Technical Specifications to Address Generic Safety Isusue-191 and Respond to Generic Letter 2004-02 Using Risk-Informed Approach | Boric Acid High winds Reactor Vessel Water Level Ultimate heat sink Non-Destructive Examination Mission time Safe Shutdown Earthquake Weld Overlay Internal Flooding Probabilistic Risk Assessment Coatings Temporary Modification Incorporated by reference Finite Element Analysis FLEX Surveillance Frequency Control Program Large early release frequency Severe Accident Management Guideline Exemption Request Maintenance Rule Program Fuel cladding Dissimilar Metal Weld |
ML22053A283 | 7 April 2022 | Issuance of Amendment No. 227 Revise Technical Specifications to Adopt Technical Specifications Task Force (TSTF) Traveler TSTF-529, Revision 4, Clarify Use and Application Rules | Time of Discovery |
ML21344A005 | 29 December 2021 | Issuance of Amendment No. 226 Regarding Adoption of 10 CFR 50.69, Risk-Informed Categorization and Treatment of Structures, Systems and Components for Nuclear Power Plants | Hot Short Safe Shutdown High winds Internal Flooding Probabilistic Risk Assessment Cyber Security FLEX Fukushima Dai-Ichi Thermoset Safeguards Contingency Plan Fire Protection Program |
ML21053A126 | 24 March 2021 | Issuance of Amendment No. 225 to Revise Technical Specification Administrative Control 5.3.1 to Remove Details Specified for the Qualification of Certain Positions within the Unit Staff | |
ML20218A410 | 3 November 2020 | Issuance of Amendment No. 224 Performance Based Method Alternative for Thermal Insulation Material | Safe Shutdown Probabilistic Risk Assessment Large early release frequency Fire Protection Program |
ML20246G570 | 16 October 2020 | Issuance of Amendment No. 223 One-Time Deferral of the Steam Generator Tube Inspections | Anticipated operational occurrence Nondestructive Examination Foreign Material Exclusion Pandemic Coronavirus |
ML20230A387 | 31 August 2020 | Request to Use a Provision of a Later Edition of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section XI | Incorporated by reference |
ML20216A681 | 6 August 2020 | Operating Quality Assurance Manual Change Revision 34B (EPID L-2020-LLQ-0004 (COVID-19)) | Pandemic Coronavirus COVID-19 Grace period |
ML20141L745 | 8 June 2020 | Operating Quality Assurance Manual Change Revision 34A | Condition Adverse to Quality |
ML20107H978 | 20 April 2020 | COVID-19 Relief Request CC-01 Containment Tendon Inspection | Incorporated by reference Pandemic Coronavirus |
ML19283C481 | 6 December 2019 | Issuance of Amendment No. 221 Main Turbine Control Slave Relay Testing | Surveillance Frequency Control Program |
ML19158A290 | 30 July 2019 | Issuance of Amendment No. 220 Regarding Emergency Action Level Scheme Changes | High winds Earthquake |
ML19073A001 | 18 April 2019 | Issuance of Amendment No. 219 to Add New Technical Specification 3.7.20, Class 1E Electrical Equipment Air Conditioning (A/C) System | Safe Shutdown Ultimate heat sink Mission time Fire Barrier Anticipated operational occurrence Cyber Security Surveillance Frequency Control Program Earthquake |
ML19079A148 | 1 April 2019 | Request for Alternative I4R-05 to Reactor Vessel Nozzle Weld Examination Frequency Requirements (EPID L-2018-LLR-0051 | Finite Element Analysis Dissimilar Metal Weld |
ML18313A069 | 26 November 2018 | Request for Relief I4R-01 Related to the Inservice Inspection Program for Class 3 Buried High Density Polyethylene Piping | Hydrostatic Through-Wall Leak |
ML18124A026 | 30 May 2018 | Issuance of Amendment No. 218 FSAR Revision Compliance with Regulatory Guide 1.106 Regarding MOV Thermal Overload Protection | Incorporated by reference |
ML17262A700 | 3 October 2017 | Request for Alternative I4R-04 Applicable to the Fourth 10-Year Inspection Program Interval | Incorporated by reference Dissimilar Metal Weld |
ML17254A120 | 25 September 2017 | Request for Alternative No. PR-07 from the Requirements of the ASME Code for the Fourth 10-Year Inservice Testing Interval | Boric Acid |
ML17236A082 | 15 September 2017 | Issuance of Amendment No. 217 Replacement of Methodology in Technical Specification 5.6.5, Core Operating Limits Report (Colr), | Boric Acid Post Accident Monitoring Hydrostatic Pressure and Temperature Limits Report |
ML17170A320 | 20 June 2017 | Safety Evaluation Input - for Ameren Missouri Request to Amend Callaway Plant, Unit 1, Technical Specification 5.6.5, Core Operating Limits Report - | Boric Acid |
ML17058A443 | 6 March 2017 | Request for Alternative I4R-03 Applicable to the Fourth 10-Year Inservice Inspection Program Interval | Hydrostatic VT-2 Incorporated by reference Foreign Material Exclusion Through Wall Leak |
ML17010A332 | 2 February 2017 | Safety Evaluation Regarding Implementation of Mitigating Strategies and Reliable Spent Fuel Pool Instrumentation Related to Orders EA-12-049 and EA-12-051 | Boric Acid High winds Shutdown Margin Loop seal High Radiation Area Ultimate heat sink Tornado Missile Time to boil Safe Shutdown Earthquake Locked High Radiation Area FLEX Fukushima Dai-Ichi Spent Fuel Pool Instrumentation Earthquake Fire Protection Program Coast down |
ML16223A712 | 30 August 2016 | Relief Request No. 13R-08 from Code Case N-460, Alternative Examination Coverage for Class 1 and Class 2 Welds, for Piping Welds, Third 10-Year Inservice Inspection Interval | Incorporated by reference |
ML16089A167 | 1 April 2016 | Review and Approval of Quality Assurance Plan Change Per Nuclear Energy Institute (NEI) 14-05A, Revision 1 | |
ML16055A464 | 17 March 2016 | Relief Requests 13R-09 (Steam Generator Tubesheet Weld), 13R-11 (Pressurizer Welds) from Code Case N-460 and 13R-18 (SG Weld), from Appendix Viii Requirements, Third 10-Year Inservice Inspection Interval (CAC MF6735-MF6737) | VT-2 Incorporated by reference |
ML16020A516 | 29 February 2016 | Issuance of Amendment No. 216, Revise Technical Specification (TS) 2.1.1.1 and TS 5.6.5, to Remove Uncertainties from Departure from Nucleate Boiling Ratio Safety Limit and Adopt WCAP-14565-P-A Methodology | Anticipated operational occurrence |
ML15324A114 | 2 February 2016 | Issuance of Amendment No. 215, Adopt Technical Specification Task Force (TSTF) Traveler TSTF-510, Revision 2, Revision to Steam Generator Program Inspection Frequencies and Tube Sample Selection | Shutdown Margin High Radiation Area Offsite Dose Calculation Manual Post Accident Monitoring Hydrostatic Nondestructive Examination Pressure and Temperature Limits Report Surveillance Frequency Control Program Annual Radiological Environmental Operating Report Process Control Program |
ML16027A158 | 29 January 2016 | Relief Request I4R-02 from Requirements of ASME Code Section XI, Table IWF-2500-1 for 100% Visual Examination of Class 1 Supports, Fourth 10-Year Inservice Inspection Interval | Incorporated by reference |
ML15328A059 | 28 January 2016 | Issuance of Amendment No. 214, Request to Revise Operating License Condition Related to Cyber Security Plan Milestone 8 Full Implementation Date | Cyber Security |
ML15258A510 | 28 October 2015 | Issuance of Amendment No. 213, Adopt Technical Specification Task Force Traveler TSTF-523, Generic Letter 2008-01, Managing Gas Accumulation | Ultimate heat sink Surveillance Frequency Control Program Pressure Boundary Leakage Power change |
ML15251A493 | 7 October 2015 | Issuance of Amendment No. 212, Request to Upgrade the Emergency Action Level Scheme by Adopting Nuclear Energy Institute NEI 99-01, Revision 6 | Fuel cladding |
ML15064A125 | 12 May 2015 | Request for Relief I4R-01 from ASME Code Requirements for Replacement of Class 3 Essential Service Water Buried Piping with High Density Polyethylene Piping, for the Fourth 10-year Inservice Testing Interval | Hydrostatic |
ML15064A028 | 31 March 2015 | Issuance of Amendment No. 211, Request to Revise Final Safety Analysis Report Standard Plant Section 3.6 for High Density Polyethylene (Hdpe) Crack Exclusion | Safe Shutdown Ultimate heat sink Internal Flooding Probabilistic Risk Assessment Earthquake Through-Wall Leak Fire Protection Program |
ML15035A148 | 10 February 2015 | Relief Request 13R-17, Proposed Alternative to ASME Code, Section XI Requirements, Which Extends Reactor Vessel Inservice Inspection Frequency from 10 to 20 Years, Third 10-Year Interval | Probabilistic Risk Assessment Incorporated by reference |
ML14350B239 | 20 January 2015 | Issuance of Amendment No. 210, Revise Technical Specification LCO 3.4.12, Cold Overpressure Mitigation System (Coms), to Clarify No Limitation on Normal Charging Pump Use During Modes 4-6 | Surveillance Frequency Control Program |
ML14234A451 | 4 September 2014 | Relief Request I3R-16, Temporary Non-Code Repair of the Train a Component Cooling Water Heat Exchanger to Control ESW Leakage, Third 10-Year Inservice Inspection Interval | Ultimate heat sink Mission time |
ML14178A769 | 15 July 2014 | Requests for Relief PR-01, PR-02, PR-03, PR-04, and PR-06 (PR-05 Withdrawn), ASME OM Code Cases for Group a and B Pumps for Fourth 10-Year Inservice Testing Interval | Boric Acid Grace period |
ML14175A390 | 1 July 2014 | Issuance of Amendment No. 209, Adoption of Technical Specification Task Force Change Traveler TSTF-522-A, Revision 0, Revise Ventilation System to Operate for 10 Hours Per Month, Using CLIIP | Surveillance Frequency Control Program |
ML14027A057 | 29 January 2014 | Relief Request PR-07, Testing Frequency for Pumps and Valves, Third 10-year Inservice Testing Interval | Grace period |