RA-18-0048, Corrected Technical Specification Pages for TSTF-425 License Amendment Request

Corrected Technical Specification Pages for TSTF-425 License Amendment Request

ML18269A009
Person / Time
Site:	Robinson
Issue date:	09/25/2018
From:	Kapopoulos E Duke Energy Progress
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
RA-18-0048
Download: ML18269A009 (16)

Text

Ernest J. Kapopoulos, Jr.

( -, DUKE H. B. Robinson Steam ENERGY Electric Plant Unit 2 Site Vice Presidenl Duke Energy 3581 West Entrance Roaa Hartsville, SC 29550 0: 843-951-1701 F: 843-951-1319 Emie.Kapopoulos@duke-energy.com Serial: RA-18-0048 10 CFR 50.90 SEP 2.5. io18 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 H. B. ROBINSON STEAM ELECTRIC PLANT, UNIT NO. 2 DOCKET NO. 50-261 / RENEWED LICENSE NO. DPR-23

SUBJECT:

CORRECTED TECHNICAL SPECIFICATION PAGES FOR TSTF-425 LICENSE AMENDMENT REQUEST

REFERENCES:

1. Duke Energy letter, Application For Technical Specifications Change Regarding Risk-Informed Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program (Adoption of TSTF-425, Revision 3),

dated April 16, 2018 (Agencywide Documents Access and Management System (ADAMS) Accession No. ML18117A006)

Ladies and Gentlemen:

In Reference 1, Duke Energy Progress, LLC (Duke Energy) submitted a request for an amendment to the Technical Specifications (TS) for H.B. Robinson Steam Electric Plant, Unit No. 2 (HBRSEP). The proposed amendment would modify HBRSEP's TS by relocating specific Surveillance Frequencies to a licensee-controlled program. Per subsequent discussion with the NRG Project Manager regarding the Reference 1 submittal, a subset of the proposed TS page changes have been revised and are provided in Attachment 1. These proposed TS page changes supersede the respective TS pages in Attachment 3 of Reference 1. No new commitments have been made in this submittal. If you have additional questions, please contact Mr. Kevin Ellis, Manager - Regulatory Affairs, at 843-951-1329.

I declare under penalty of perjury that the foregoing is true and correct.

Executed on 2 <Sff~6f~ o18.

Sincere!~ ~

Ernest J. Kapopoulos, Jr.

Site Vice President

U.S. Nuclear Regulatory Commission RA-18-0048 Page2 EJK/jbd Attachments:

1. Revision of Proposed Technical Specification Page Changes cc:

C. Haney, Regional Administrator USNRC Region II J. Rotton, USNRC Senior Resident Inspector - RNP D. J. Galvin, NRR Project Manager - RNP L. Garner, Manager, Radioactive and Infectious Waste Management Section (SC)

A Wilson, Attorney General (SC)

S. E. Jenkins, Chief, Bureau of Radiological Health (SC)

U.S. Nuclear Regulatory Commission RA-18-0048 Page3 bee:

Chris Nolan Art Zaremba Kate Nolan David Cummings File: (Corporate)

Electronic Licensing Library (ELL)

Kevin Ellis Christine Caudell (For RNP Licensing/Nuclear Records Files)

RA-18-0048 Attachment 1 Revision of Proposed Technical Specification Page Changes

Definitions 1.1

1. 1 Definitions SHUTDOWN MARGIN a. Al.1 .rod cluster .cont~ol assemblies .CRCCAs} are (confi nued) fully inserted except for the single RCCA of highest reactivity worth. which is assumed to be fully withdrawn. With any RCCA not capable

-0f being fully inserted. the reactivity worth of the RCCA llllst be accounted for in the determination of SOM: and

b. In MODES 1 and 2. the fuel and moderator temperatures are changed to 547°F.

SLAVE RELAY TEST A SLAVE RELAY TEST shall -consist of energizing each slave relay and verifying the OPERABILITY of each slave relay. The SLAVE RELAY TEST shall include, as a minimum. a continuity check of associated testa~le actuation devices.

THERMAL POWER THERMAL POWER shall be the*total reactor core heat transfer rate to the reactor coolant.

• . ...TRIP-ACTUATING-DEVICE-- *-- - A-TAOOTshall- consisY of operating the trip .

OPERATIONAL TEST actuating device and verifying the OPERABILITY* of (TAD0T) required alarm. interlock. display, and trip .

functions. The TADOT shall include adjustment. as necessary. of the trip a'ctuating device so that it actuates at the required setpoint within the required accuracy.

HBRSEP Unit No. 2 1.1-5 Amendment No.~

Rod Group Alignment Limits 3.1.4 SURVEILLANCE REQUIREMENTS (continued}

SURVEILLANCE FREQUENCY SR 3.1.4.2 Verify rod freedom of movement 92 days (trippability) by moving each rod not fully inserted in the core~ 10 steps in either direction. l1N~T1 I SR 3.1.4.3 Verify rod drop time of each rod, from the Prior to fully withdrawn position, is~ 1.8 seconds reactor from the beginning of decay of stationary criticality gripper coil voltage to dashpot entry, after each with: removal of the reactor head

a. Tavo ~ 540°F; and

b. All reactor coolant pumps operating.

HBRSEP Unit No. 2 3.1-9 Amendment No. m

RPS Instrumentation 3.3.1

~URVEILLANCE REQUIREMENTS

• • • • • • • -**--------**********-***-**~-NOTE-*--*-*******-********************-**

Refer to Table 3.3.1-1 to determine which SRs apply for each RPS Function.

SURVEILLANCE FREQUENCY SR 3.3.1.1 Perform CHANNEL CHECK. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> tjlNSERT 1 I SR 3.3.1.2 *-**--*---*-***----NOTES---*---*---*--*----

1. Adjust NIS channel if absolute difference is> 2X.

2. Not required to be .performed until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after THERMAL POWER is 2: lSt RTP.

Compare results of calorimetric heat 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> balance calculation to Nuclear Instrumentation System CNIS) channel output.

PN~T 1 I SR 3.3.1.3 -*------------*---*NOTES--------*----------

1. Adjust NIS channel if absolute difference is 2: 3t.

2. Not required to be performed until 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> after THERMAL POWER is 2:: 15.t RTP.

l1N,RT1 j Compare results of the incore detector 31 effecti -.,e measurements to NIS AFD. full power days CEFPD)

(continued)

HBRSEP Unit No. 2 3.3-8 Amendment No. 116

RCS Loops -MOOE 4 3.4.6 Ar~TTONS <cont i n1 ,Pn)

CONDITION REQUIRED ACTION COMPLETION TIME B. One required loop B.1 Be in MODE 5. 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> or train inoperable.

MID One required RHR train OPERABLE.

C. Two required loops or C.1 Suspend operations Immediately

- trains inoperable. that would cause introduction into the OR RCS. coolant with boron concentration Required loop or train less than required to not in operation. meet SDM of LCO 3.1.1.

MID C.2 Initiate action to Immediately restore one loop or u train to OPERABLE status and operation.

SURVEILLJI.NCE FREQUENCY SR 3.4.6.1 Verify one RHR train or RCS loop is in 12 ho1:1rs tjlNSERT 1 I operation.

SR 3.4.6.2 Verify SG secondary side water levels are 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> tjlNSERT 1 I

~ 16t for required RCS loops.

SR 3.4.6.3 Verify correct breaker alignment and indicated power are available to the 7 days tjlNSERT 1 I required pump that is not in operation.

u HBRSEP Unit No. 2 3.4-15 Amendment No. 176,199 f.~AR 1 ~ 2G01

Pressurizer 3.4.9 CONDITION REQUIRED ACTION COMPLETION TIME D. Required Action and D.1 Bein MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time of Condition B or C AND .

not met.

D.2 Bein MODE4. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.9.1 Verify pressurizer water level is within limits. ~fS ~INSERT 1 I SR 3.4.9.2 Verify capacity of required pressurizer heaters is 24 moAths I i:!: 125 kW. ~

SR 3.4 .9.3 Verify required pressurizer heaters are 24 months ~ - - -'

capable of being powered from an YINSERT 1 j emergency power supply.

HBRSEP Unit No. 2 3.4-22 Amendment No. 268

Pressurizer PORVs 3.4.11

,\CTIONS CONDITION REQUIRED ACTION COMPLETION TIME F. (continued) F.2 Restore one block 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> valve to OPERABLE status.

AND F.3 Restore remaining 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> block valve to OPERABLE status.

G. Required Action and G.1 Be in MODE 3. 6 hours associated Completion Time of Condition F AND not met.

G.2 Be in MODE 4. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> V

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.11.1 ---*-*****--*-**-**NOTE--******************

Not required to be met with block valve closed in accordance with the Required Action of Condition*e or E.

Perform a complete cycle of each block

~

92 days valve.

(continued)

HBRSEP Unit No. 2 3.4*27 Amendment No. m

RCS Specific Activity 3.4.16 u ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME C. Required Action and C.1 Be in MODE 3 with 6 hours associated Completion T*yg < 500°F.

Time of Condition A not met.

nB.

DOSE EQUIVALENT I-131

> 60 µCi/gm.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.16.1 Verify reactor coolant gross specific 7 days tjlNSERT 1 I activity s 100~ µCi/gm.

u SR 3.4.16.2 *******************NOTE-***-*--**--*-----*-

Only required to be performed in MODE 1.

Verify reactor coolant DOSE EQUIVALENT

~

14 days

-* 1-131 specific activity~ 0.25 µCi/gm.

Ml[}

Between 2" and .

6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> after a THERJ-La.L POWER change of

i!: 15.\' RTP within a 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> period (continued)

HBRSEP Unit No. 2 3.4-46 Amendment No. m. 201

ECCS-Operati ng 3.5.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.5.2.7 Verify the following valves in the listed position:

• 31 daY' Number FCV-605 Position Closed/Motive Function RHR

~

Air Isolated HCV-758 Closed/Motive RHR Air Isolated SR 3.5.2.8 Verify the following manual valve is locked 92 da.ve in the listed position Number Position Function ~

RHR-764 Locked Open LHSI HBRSEP Unit No. 2 3.5-7 Amendment No. m

AC Sources-Operating 3.8.1 3URVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.1.1 Verify correct breaker alignment and 7 days indicated power availability for the offsite circuit. ~

SR 3.8.1.2 ****************-**NOTES*******************

1. Performance of SR 3.8.1.7 satisfies this SR.

2. All DG starts may be preceded by an engine prelube period and followed by a warmup period prior to loading.

3. A modified DG start involving idling and gradual acceleration to synchronous speed may be used for this SR as recommended by the manufacturer.

When modified start procedures are not used, the time. voltage, and frequency tolerances of SR 3.8.1.7 must be met.

Verify each DG starts from standby :n .days conditions and achieves steady state voltage~ 467 V ands 493 V, and frequency

~ 58.8 Hz and~ 61.2 Hz. ~

(continued).

HBRSEP Unit No. 2 3.8-4 Amendment No. 176

AC Sources -Operating 3.8.1 SURVEILLANCE REQUIREMENTS {continued)

SURVEILLANCE

• FREQUENCY SR 3.8.1.3 **-**-~----**-*****NOTES*******************

1. 0G loadings may include gradual loading as recommended by the manufacturer.

2. Momentary transients outside the load range do not invalidate this test.

3. This Surveillance shall be conducted on only one DG at a time:

4. This SR shall be preceded by and immediately follow without shutdown a s~ccessful performance of SR 3.8.1.2 or SR 3.8.1.7. *

5. During periods when a diesel generator is being operated for testing purposes, its protective trips need not be bypassed after the diesel generator has properly assumed the u load on its bus.

Verify each DG is synchronized and loaded 31 days and operates for~ 60 minutes at a load

~ 2350 kW and~ 2500 kW.

~

SR 3.8.1.4 Verify each day tank contains~ 140 gallons 31 day.s of fuel oil.

~

SR 3.8.1.5 Check for and remove accumulated water .from 31 days each day tank.

~

{continued)

HBRSEP Unit No. 2 3.8-5 Amendment No. µ6

DC Sources - Operating 3.8.4 3.8 ELECTRICAL POWER SYSTEMS

3. 8. 4 DC Sources - Operating LCO 3.8.4 The Train A and Train B DC electrical power*subsystems shall be OPERABLE.

APPLICABILITY: MODES 1, 2, 3, and 4.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One DC electrical A.l Restore DC electrical 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> power subsystem power subsystem to inoperable. OPERABLE status.

B. Required Action and 8.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Associated Completion Time not met. AND B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.4.1 Verify battery terminal voltage is 7 days

~ 125.7 Von float charge.

~

(continued)

V HBRSEP Unit No. 2

• 3.8-19 Amendment No. m

AC Instrument Bus Sources - Operating 3.8.7 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.7.1 Verify correct inverter voltage. frequency. 7 days and alignment to required AC instrument buses.. ~

SR 3.8.7.2 Verify voltage availability and correct CVT 7 days alignment to required AC instrument buses.

~

HBRSEP Unit No. 2 3.8-29 Amendment No. 176