ML21036A217

SLRA - Proprietary Determination Letter

ML21036A217
Person / Time
Site:	Point Beach
Issue date:	03/01/2021
From:	Bill Rogers NRC/NRR/DNRL/NLRP
To:	Moul D Florida Power & Light Co
Rogers B
Shared Package
ML21036A218	List: ML21036A217
References
EPID L-2020-SLR-0002
Download: ML21036A217 (5)

Text

Mr. Don Moul Executive Vice President, Nuclear Division and Chief Nuclear Officer Florida Power & Light Company Mail Stop: EX/JB 700 Universe Blvd Juno Beach, FL 33408

SUBJECT:

U.S. NUCLEAR REGULATORY COMMISSION APPROVAL OF NEXTERA ENERGY POINT BEACH, LLCS REQUEST FOR WITHOLDING INFORMATION FROM PUBLIC DISCLOSURE, REGARDING THE APPLICATION FOR SUBSEQUENT LICENSE RENEWAL OF POINT BEACH NUCLEAR PLANT, UNITS 1 AND 2 (EPID NO. L-2020-SLR-0002)

Dear Mr. Moul:

By letter to the U.S. Nuclear Regulatory Commission (NRC) dated November 16, 2020, (Agencywide Documents Access and Management System (ADAMS) Package Accession No. ML20329A292) NextEra Energy Point Beach, LLC (NextEra) submitted one affidavit, for Framatome Inc, executed by Philip A. Opsal, dated November 4, 2020; one affidavit for Westinghouse, Electric Company LLC., executed by Korey L. Hosack, dated November 3, 2020; and ten affidavits for Westinghouse, Electric Company LLC., executed by Zachary S. Harper, dated June 12, 2020, July 7, 2020, July 8, 2020, July 9, 2020, July 20, 2020, July 23, 2020, September 16, 2020, September 29, 2020, October 7, 2020, and October 30, 2020, requesting that the information contained in the following documents, respectively, be withheld from public disclosure pursuant to Title 10 of the Code of Federal Regulations (10 CFR), Part 2, Section 2.390:

Framatome affidavit executed by Philip A. Opsal, dated November 4, 2020

Framatome Topical Report BAW-2192, Revision 0, Supplement 3P, Revision 0, Low Upper-Shelf Toughness Fracture Mechanics Analysis of Reactor Vessels of B&W Owners Reactor Vessel Working Group for Levels A & B Service Loads, October 2020 Framatome Topical Report BAW-2178, Revision 0, Supplement 2P, Revision 0, Low

Upper-Shelf Toughness Fracture Mechanics Analysis of Reactor Vessels of B&W Owners Reactor Vessel Working Group for Levels C & D Service Loads, October 2020

Framatome Technical Report ANP-3886P, Revision 0, PWROG-20043-P, PWROG -

PBN Unit 1 IS Plate A9811-1 Equivalent Margins Analysis for SLR, October 2020 March 1, 2021

D. Moul 2

Westinghouse affidavit executed by Korey L. Hosack, dated November 3, 2020 CAW-20-5110, Affidavit for Westinghouse proprietary portions of File No.:

2000088.310P - PROPRIETARY, Revision 1, EAF Refined Analyses (Charging Nozzle, Hot Leg Surge Nozzle, SI Nozzle, SI/RHR Tee)

Westinghouse affidavits executed by Zachary S. Harper (dated as indicated below)

CAW-20-5057, Affidavit for Westinghouse proprietary portions of WCAP-14439-P,

Revision 4, dated June 12, 2020 CAW-20-5065, Affidavit for Westinghouse proprietary portions of LTR-SDA-II-20-05-P,

Revision 2, dated July 7, 2020 CAW-20-5066, Affidavit for Westinghouse proprietary portions of LTR-REA-20-29-P,

Revision 0, dated July 8, 2020 CAW-20-5067, Affidavit for Westinghouse proprietary portions of LTR-SDA-20-020-P,

Revision 1, dated July 9, 2020 CAW-20-5071, Affidavit for Westinghouse proprietary portions of LTR-SDA-II-20-08-P,

Revision 1, dated July 20, 2020 CAW-20-5073, Affidavit for Westinghouse proprietary portions of LTR-PAFM-05-58-P,

Revision 3, dated July 23, 2020 CAW-20-5091, Affidavit for Westinghouse proprietary portions of WCAP-18554-P

Revision 1, dated September 16, 2020 CAW-20-5101, Affidavit for Westinghouse proprietary portions of LTR-SDA-II-20-13-P,

Revision 2, dated September 29, 2020 CAW-20-5102, Affidavit for Westinghouse proprietary portions of LTR-SDA-20-064-P,

Revision 1, dated October 7, 2020 CAW-20-5109, Affidavit for Westinghouse proprietary portions of Point Beach Nuclear

Plant Units 1 and 2 Subsequent License Renewal Application (SLRA) Table 4.3.4-1 Sentinel Locations, dated October 30, 2020 The affidavit for Framatome Inc. executed by Philip A. Opsal, dated November 4, 2020, stated that the submitted information should be considered exempt from mandatory public disclosure for the following reasons:

The information for which withholding from disclosure is requested qualifies under

10 CFR 2.390(a)(4) Trade secrets and commercial or financial information.

The information reveals details of Framatomes research and development plans and

programs or their results.

Use of the information by a competitor would permit the competitor to significantly

reduce its expenditures, in time or resources, to design, produce, or market a similar product or service.

The information includes test data or analytical techniques concerning a process,

methodology, or component, the application of which results in a competitive advantage for Framatome.

D. Moul 3

The information reveals certain distinguishing aspects of a process, methodology, or

component, the exclusive use of which provides a competitive advantage for Framatome in product optimization or marketability.

The information is vital to a competitive advantage held by Framatome, would be

helpful to competitors to Framatome, and would likely cause substantial harm to the competitive position of Framatome.

The affidavit for Westinghouse, Electric Company LLC. executed by Korey L. Hosack, dated November 3, 2020, stated that the submitted information should be considered exempt from mandatory public disclosure for the following reasons:

The information for which withholding from disclosure is requested qualifies under

10 CFR 2.390(a)(4) Trade secrets and commercial or financial information.

The information reveals the distinguishing aspects of a process (or component, structure,

tool, method, etc.) where prevention of its use by any of Westinghouse's competitors without license from Westinghouse constitutes a competitive economic advantage over other companies.

It consists of supporting data, including test data, relative to a process (or component,

structure, tool, method, etc.) the application of which data secures a competitive economic advantage (e.g., by optimization or improved marketability).

Its use by a competitor would reduce his expenditure of resources or improve his

competitive position in the design, manufacture, shipment, installation, assurance of quality, or licensing a similar product.

The affidavits for Westinghouse, Electric Company LLC, executed by Zachary S. Harper, dated June 12, 2020, July 7, 2020, July 8, 2020, July 9, 2020, July 20, 2020, July 23, 2020, September 16, 2020, September 29, 2020, October 7, 2020, and October 30, 2020, each of which stated that the submitted information should be considered exempt from mandatory public disclosure for the following reasons:

The information for which withholding from disclosure is requested qualifies under

10 CFR 2.390(a)(4) Trade secrets and commercial or financial information.

The information reveals the distinguishing aspects of a process (or component, structure,

tool, method, etc.) where prevention of its use by any of Westinghouse's competitors without license from Westinghouse constitutes a competitive economic advantage over other companies.

It consists of supporting data, including test data, relative to a process (or component,

structure, tool, method, etc.), the application of which data secures a competitive economic advantage (e.g., by optimization or improved marketability).

Its use by a competitor would reduce his expenditure of resources or improve his

competitive position in the design, manufacture, shipment, installation, assurance of quality, or licensing a similar product.

It reveals cost or price information, production capacities, budget levels, or commercial

strategies of Westinghouse, its customers or suppliers.

D. Moul 4

It reveals aspects of past, present, or future Westinghouse or customer funded

development plans and programs of potential commercial value to Westinghouse.

It contains patentable ideas, for which patent protection may be desirable.

Nonproprietary copies of these documents have been placed in the NRC's Public Document Room and added to the NRC Library at Agencywide Documents Access and Management System (ADAMS) ML20329A264.

We have reviewed your application and the material in accordance with the requirements of 10 CFR 9.17 and 10 CFR 2.390 and, on the basis of the statements in the affidavit, have determined that the submitted information sought to be withheld contains trade secrets or confidential or privileged commercial or financial information and should be withheld from public disclosure.

Therefore, the version of the submitted information marked as proprietary will be withheld from public disclosure pursuant to 10 CFR 2.390(b)(5) and Section 103(b) of the Atomic Energy Act of 1954, as amended.

Withholding from public inspection shall not affect the right, if any, of persons properly and directly concerned to inspect the documents. If the need arises, we may send copies of this information to our consultants working in this area. We will, of course, ensure that the consultants have signed the appropriate agreements for handling proprietary information.

If the basis for withholding this information from public inspection should change in the future such that the information could then be made available for public inspection, you should promptly notify the NRC. You also should understand that the NRC may have cause to review this determination in the future, for example, if the scope of a Freedom of Information Act request includes your information. In all review situations, if the NRC makes a determination adverse to the above, you will be notified in advance of any public disclosure.

If you have any questions regarding this matter, I may be reached at 301-415-2945, or by email at bill.rogers@nrc.gov.

Sincerely, Bill H. Rogers, Senior Project Manager License Renewal Projects Branch Division of New and Renewed Licenses Office of Nuclear Reactor Regulation Docket Nos. 50-266 and 50-301 Signed by Rogers, Billy on 03/01/21

ML21036A217 OFFICE PM:NLRP:DNRL LA:NLRP:DNRL BC:NLRP:DNRL PM:NLRP:DNRL NAME BRogers YEdmonds LGibson BRogers DATE