ML20083A278

From kanterella
Jump to navigation Jump to search
Rev 2 to Procedure 1040-001-017, Containment Spray Sys
ML20083A278
Person / Time
Site: Davis Besse Cleveland Electric icon.png
Issue date: 11/02/1983
From:
TOLEDO EDISON CO.
To:
Shared Package
ML17150A231 List:
References
1040-001-017, 1040-1-17, IEB-79-01B, IEB-79-1B, NUDOCS 8312200238
Download: ML20083A278 (14)
v • d • e


Text

.

l CALCULATION / PROBLEM COVER SHEET Calculation / Problem No: 1040-001-017 i

Title:

containment Soray System 2.14 Client: Toledo Edison Ccmpany Project: Davis-Besse Unit 1 Job No*. 1040-001-671 I&E Bulletin 79-01B Equipment Qualification De:Ign input /Reforences:

Design Inputs are outlined in the Cover Report.

A;;umptions: ~

Assumptions are outlined in the Cover Report.

~

M;thod:

l I

  • Methods are outlined in the Cover Report.

R marks:

EDS Nuclear Report No. 02-1040-1076. .,

1 REV. NO. REVISION APPROVED l DATE D Orfcg7NO de_k$. g% (o-2-% / -

.2 GelauSxeun Am'sws Al/c/,,dfhjau0 ///z/B d

/

I 0312200238 831129 sos ooos s: DR ADOCK 05000346  !

PDR .. / /

\ -

Fccility: Davis-Brese Unit 1 Docket: 50-346 MASTER LIST HARSH ENVIRONMENT Index No: _214M-001_

Rev.:

CONTAINMENT SPRAY SYSTEM 2 Prepared by: _

Checked by:

h fl 1g_ Date: // !b

_ Date: ///8//$

f 1

l l

, 1 l I I l l

' l Worksheet 1 l Plant  ! l LOCATION I I__ Index No. Inside i Outside I I Rev. IID Number i l

I I Generic Name I Primary l Primary l I l I l I 214H-004 l 2 IMPOS61 lI Containment l Containment i REMARKS l Containment Spray Pump Motor I l 214H-005 1 2 IMPO5b2 I

I l Containment Spray Pump Motor l I I 214H-006 1 2 lMV15300 l Rm. 105 l 1 214H-007 2 l Valve Motor Operator l l Rm. 115 l l

1 IMV15310 i Valve Motor Operator I i l I I 2 IBEllC Rm. 303 l l 1 j i l 2 lCDEllC I Motor Control Center l Rm. 314 l l l 1

I 2 IEV15300 l Disconnect Switch Cabinet 1 1 Rm. 304 l See 2.21 l l i 2 IEV15310 1 Terminal Block Box I Rm. 304 l See 2.21

I I I l Terminal Block Box 1 i Rm. 303 l See 2.21 1

I 1 I I I I I Rm. 314 i See 2.21 I I I l I I I I I I I I I I I I I

I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I l I I I I I

I I l I I

I I I I I I i i  : I I I I I I I I I I I I I I 1 I I I I l I I I I I I I I i i i I I I I i I I l I i

{ i I 1 I I I I I I I I I i i

I I I I I I I I

l l I I

I I I I I I I l I l I I i I l I I I I

I I I I I I I I I I I

! I I I I I

I i I I

i I i i l i i I

i i i i i

! i i

JN Facil'.v t Davis-Bessa Unit 1 R LIST _s/

Docket: 50-346 Index hu: 214M-002 NON-HARSH ENVIROM1ENT Rev.: 2 CONTAINMENT SPRAY SYSTEM Prepared by: , e . Date: 7 O

' Checked by: .A. -g , , - Date: -ar4 l l l l l LOCATION l l l l l l I Worksheet l l Inside i Outside l I l Plant l l Primary l Primary Index No. i I I I Rev. lID Number l Generic Name l Containment I Containment l REMARKS 1 I I l l

l I l 10 IBEl i Unit Sub-Station l l Rm. 429 I

l l

l l l 0 IBFI l Unit Sub-Station l l Rm. 428 I l 0 IBFilB I l l Motor Control Center l I Rm. 405 l l l 0 lCDFllB l I Disconnect Switch Cabinet l l Rm. 405 l l l l 0 1C5716 i Engineering Safety Feature Panel l I Rm. 505 l I I I l I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I l l I I I I I I I I I I I I I I I I I I I I I I I I I I I I i i i l I I I I I i i i I I I I I I I I I I I I I I I I I I I I i i i i i l I I I I I I I I I I I I I I I I I I I I I i i i l l I I I I I I I I I I I I I I I I I I I l l I I l l 1 I I i I I i i i l l I l I i l l l l 1 1 I I I t i I I 1 I I I I I I I I I I I I I I I I I I

I I I  ! I

(

1 Facili . Davis-B:sse Unit 1 MASTER LIST Docket: 50-346 Index No: 214N-003 Rev.: 2 CONTAINMENT SPRAY SYSTEM j

Prepared by:

Checked by: y_ w ,, fi , ,/

M Date:

Date:

k'9 Jo///

i l l l l 4

1 I l l LOCATION I l I I Worksheet l I Plant i l Inside l Outside i j Primary l l Index No. I Rev. IID Number l I l Primary l l l Generic Name i l I I l Containment I Containment l REMARKS l l l I I l l l l l l l i i i l l 1 i i I i i i i

i I

I I I l i I

' I I I I I I I i i I i I I I i i i I I i l I i l i I l i i I i l i I I I I i l I I I i I I I I I I I I i I i i l i I I I

I I i l l I I I I I I

)

l l l I i l l l I I 1 I I I l

' I I I I I I I I I I I I 1 I I I I I I l I I I I I I I I I I I I I I I I I

1 I I I I i

I I I i i I I i i I I

! I I l i l I I I i l I I i I I I I 1

i l l I I i I I 1 I I I I I I I i I i i

l I i l I 1 I I I I I I I

I I I l I I I I

1 I I I I I I l i i I I l i I I I I I i I i l i I I
I I i l l I I I 4 I I I I e

,e w _ -

'Ecility : d ~ 4-tssse Unit 1 SYSTEM COMPONENT b...fEATION WORKSHEET Indrx No): 214H-004 x>ckst: 50-346 Re v. : 2

'repared by: b , Dater f/ ]

2:ecktd by: _h-fr/ / Datea f//)-/(3 II I l l l

. EQUIPMENT DESCRIPTION ll ENVIRONMENT l DOCUMENTATION REF. l QualifJection l Outstanding l ll Parameter l Specification l Qualification Specification Qualification l Method 1 Items l

! ll l l ,

l

~ - ~

l l

) Syntsm: Containment Spray ll Operating l 1 Year l 40 Years l Note 1 l Note 2 l Analysis l None l ll Time l l l l l l l Plant ID No. MP0561 ll l l l l l

ll l l l l l l l Component Containment ll Temperature l 130.0 l Exempt l C-105 l Note 3 l' N/A None l l Spray Pump ll (*F) l l l l l l l Motor ll l l

} l l Manufacturer: General ll l l l l l l l Dynamics ll Pressure l 16.06 l Exempt C-105 Note .1 l l l N/A l None l 1 ll(PSIA) l l l l l l l Modal Number: 60101851 ll l l l l l l l ll l l l l I l l Function: Drives Contain-l l Relative l 100.0 l Exempt l A l Note 3 l N/A l None l l ment Spray Pump ll Humidity l l l l l l l ll (s) l l l l l l l Accuracy: Spect N/A ll l l l l I l l Demon: N/A ll l l l l l l l l ll Chemical l N/A l N/A l N/A l N/A l N/A l None l 4

Sarvice: Containment ll Spray l l l l l l l Spray Pump 1-1 ll l l l l l l l ll l l l I l l Location: Auxiliary Bldg.ll l l l l CAL-88 l l l 1

Rm. 105 l l Radiation l1.9 x 106 RADS l1.0 x 109 RADS l T l Note 2 l Analysis None l l ll l l l l l Flood Level Elev: N/A ll l l l l l Abova Flood Level N/A ll Aging l 40 Years l 40 Years l I l CAL-88 Analysis None l l l ll l l l l Note 2 l l l Netdsd for: ll ,

l l l l l' Hot Shutdown lX l ll l l l l l l l ll Submergence l N/A l N/A l N/A l N/A l N/A l None l Cold shutdown l l ll l l l l l l l ll l l l l l l l

' Facility: L # s-3esas Unit 1 \

Dxkst s 50-346 SYSTDt COMPONENT EVALUATION WORKSHEET Index No.: _214H-004A Rev.: 2 Prspared by: _ Date k i Checksd bya f pisD_ f f2 Date _ y/>//3 I

i j

1. i i One-year operating time is used as a conservative maximum specification .
2 1 Materials evaluation conducted.

i 3.

Materials sensitive to radiation and/or thermal aging sununarized on attached evaluation .

j i Tha harsh environment in Room 105 is caused by a main feedwater line break outside t is exempt from qualification because the containment spray ' system does not perform containment. The containment spray pump i

during a high energy line break accident occurring outside containment .

an essential safety-related function

for this accident, pump motor failure will not degrad
  • other safety-related functions or misleade thSince the containment sp operator. The

! increased radiation dose due to post-LOCA recirculated fluids and the HELB are separat

! utilizedusing made is thequalified post-LOCA splices. recirculating fluids dose plus the 40-year normal backgroundedose effects. The radiation value See CAL-60 for lubrication discussion.

Motor lead connections are l

i l

i.

e 1

i i

i

Docksts o

FKcility ( tris-Besso Unit 1 50-346 O

COMPONENT MATERIALi3 EVALUATION SHEET O

Ind,x No.: 214H-004B Rev.: 2 Prspared by: N  ! l .I Chicked by: M dl-/_ Uate: Date: t//J//3 I Plant I.D. No.: MP0561 Component: Containment Spray Pump Motor l l Manufacturer: General Dynamics Model No.: 60101851

' 1 I

l i i I THERMAL AGING l RADIATION l i Parts List

  • I Materials List I Qualification I I

} Reference ! Qualification l Reference i I I I

1 1.ilot Liner i Polyester I I l Wzdge 1 40 Years @ 266*F l CAL-88 1.0 x 109 l Fiberglass Mat l Not Sensitive CAL-38 l RADS I CAL-88 I I

l Phase Paper i Polyester l 40 Years 0 266*F I Not Sensitive i CAL-88 I l Slot Filler i CAL-88 l 1.0 x 109 RADS I CAL-80 l Polyester fiber paper 1 40 Years @ 266*F i CAL-88 1.0 x 109 l

1 i Wire l Copper wire with polyesterl 40 Years @ 266*F I RADS l CAL-88 l

} l 1 film l CAL-88 l 1.0 x 109 RADS I CAL-88 l l ) l I .

I I I i I I I I I I I I I t i I I I I I I I I i I I I i I I i I I I I I I I I I I I I I I I

' I I I I I I I I I I I I I I I I I I I I I

  • I I I I l I

' I i i I I I i I i I 1 l i i i l i l i I i l

!I l i i I I 1.

l i I I I I I I I I

!I I I I I

I I I I I I I

ll 1'

l l I

1 I

1 I

I l

i Material & Parts List

Reference:

V-17A

  • Only non-metallic parts are listed. Metallic partro .

radiation. are not considered sensitive to thermal aging and are not affected by

t FEcility: L J -Basso Unit 1 SYSTEM COMPONENT LJATION WORKSHEET IndIx LL_r'214H-005 Docksts 50-346 Rev.: 2 Prspared by:

Checksd by:

Dater k//fD p M __ [ Dater //////) .

l ll l l l l l EQUIPMENT DESCRIPTION ll ENVIPONMENT l DOCUMENTATION REF. l Qualification l Outstanding l

, I l l Parameter l Sper:ification l Qualification Specification Qualification l Method Items l l ll l l l l 1 l l System: Containment Spray ll Operating l 1 Year l 40 Years l Note 1 l Note 2 l Analysis l None l l ll Time l l l l l l l l Plant ID No. MP0562 ll l l l l l ll 11 l l l l l l l t

l Component : Containment ll Temperature l 177.0 l Exempt l C-115 l Note 3 l N/A l None l l Spray Pump ll (*F) l l l l l l l l Motor ll l l l l l l 1 l Manufacturer General ll l l l l l l l

, I Dynamics ll Pressure l 15.60 l Exempt l C-IIS l Note 3 l N/A l None l l ll(PSIA) l l l l l l l l Modal Number: 60101851 ll l l l l l l l 4 l ll l l l l 1 1 l l Function: Drives Contain-ll Relative l 100.0 l Exempt l A l Note 3 l N/A l None l l ment Spray Pump llHn:aidity l l l l l l l l ll (s) l I l I 1 l

] l Accuracy: Spec: N/A ll l l l I l l l

l Demon: N/A ll l l l l l l l ll ll Chemical l N/A l N/A l N/A l N/A l N/A l None l lSnrvice: Containment ll Spray l l l l l l l 4

l Spray Pump 1-2 ll l l l l l l l

l ll l l l '

l l

[ l Location: Auxiliary Bldg.ll l l l l CAL-88 l l 6 9 l

l Rm. 115 l l Radiation l2.67 x 10 RADS l1.0 x 10 RADS l T l Note 2 l Analysis l None l 4

l ll l l l l l l l Flood Level Elev: N/A ll l l l l l l l lAbova Flood Level: N/A ll Aging l 40 Years l 40 Years l 1 l CAL-88 l Analysis l None l l ll l l l l Note 2 l l l

, lNeeded fors ll l l l l l l l

' l Hot Shutdown lX l ll l l l l l l l ll ll Submergence l N/A l N/A l N/A l N/A l N/A l None l l Cold Shutdown l l ll l l l l l l l l ll l l l l l l l

p 'N

( ,

\  %

Pccility: D3vis-Esses Unit 1 h kst: 50-346 SYSTEM COMPONENT EVALUATION WORKSHEET Preparad by: ^~ Index No.: _214H-005A Re v. : 2 Checksd by: h Date __f 31_ #

Date ///A/h 1.

Ona year operating time is used as a conservative maximum specification.

2 Mzterials evaluation conducted.

3 Materials sensitive to radiation and/or themal aging sum Tha harsh environment in Room 115 is caused by a main feed marized on attach-d evaluation.

is exenyt f rom qualification because the containment s water line break outside containment.

during a high energy line break accident occurring outsidepray system does not perform an essential safety-rel for this accident, pump motor f ailure will not degrade othercontainment.

increased radiation dose due to post-LOCA recirculated u flsafety-related id functions or mislead the operator.Since The t

made using qualified splices. utilized is the post-LOCA recirculating fluids dose plus theThe 40radiation years and the HELB ar value See CAL-60 f or lubrication discussion. normal background dose. Motor lead connections are l

i k

i i

l l

Fccilitys s.vis-33 coa Unit 1 k. ./

Dockst: 50-346 COMPONENT MATERIALS EVALUATION SHEET Index No.: 214H-005B Rev.: 2 Prcpared by k Dates b/ }

Chrcked byr pe;rh Date: ///A//7 i Plant I.D. No.: MP0562 Component: Containment Spray Pump Motor I Manufacturer: I General Dynamics Model No.: 60101851 4

l 1 I I I I THERMAL AGING l RADIATION i Parts List

  • I I Materials List ] Qualification i i i ' Reference l Qualification i Reference I fI Slot Liner i Polyester l

1 40 Years 0 266*F i

CAL-88 I

i I I Wedge i Fiberglass Mat l l 1.0 x 109 RADS I CAL-88 I i Not Sensitive I' CAL-88 i I Phase Paper i Polyester Not Sensitive I CAL-88 I

[ 40 Years 6 266*F I CAL-83 1.0 x 109 I Slot Filler l Polyester fiber paper i 40 Years 6 266*F 1 RADS l CAL-88 I I Wire I Copper wire with polyesterl I CAL-88 l 1.0 x 109 RADS l CAL-88 I 40 Years @ 266*F i CAL-88 l 1.0 x 109 RADS

, I I film I I CAL-88 1 I I I l i I I i I I i l l I I I I I I I I I l l l I  ; l I i 1 I I I I I I I I I I I I I I I l l I I I I I I l I I 1 I l l I i I l l I l l I I I I l i I I I I I I I I I I .

l I I l I I I i i i I

I l

'I I I I I I l i I I I I I I iI i l I I i l i l l I i i i I i I 1 I I I I I I I I Material & Parts List

Reference:

V-17A l

  • Only non-metallic parts are listed.

radiation. Metallic parts are not considered sensitive to thennal aging and are not affected by 1

D

Fccility: beis-BezzaUnit1 SYSTEM COMPONENT VALUATIGI WORKSHEET Dockst: 50-346 Index do.: 214H-006 Re v. : 2 Prepared by: Dates l f Checksd by: d dst f l.- f .Date ///.VO

, I II l '

lBQUIPMENT DESCRIPTION l l l ll ENVIRONMENT l l l Pa rameter Specification DOCUMENTATION REF. l Qualification l Outstanding l Qualification Specif ication Qualification l Method

! ll 1 i i l Items l ,

l Systems Containment l l Operating l 1 Year 1.1 Years l l l l l l F l M-26 l Simultaneous l None j l Spray System ll Time l l l l V-24C l Test l ll l l } l Note 1 l l l j l Plant ID No. MV15300 ll l l l t

( l l l l Temperature l 218.0 300.0 C-303 M-26

{ll l Component  : Valve Motor ll (*F) l l l l l

l l V-24C l Simultaneous l l Test None l i l Operator ll l l l l l l l ,

lManuf acturers Limitorque ll l l l l l l l l l l Pressure l i l l 17.16 l 84.7 l C-303 M-26 l Mod 21 Number SMB-0-15 ll(PSIA) l .l l l Simultaneous l None l lO/N: 374106A l l V-24C l Test l ll l l l l l

, lS/N: 182632 ll { l j l l l l

! l Function: Operates l l Relative l 100.0 l 100.'O A M-26 l l l ll Containment Sp ray l l Humidity l l l l Simultaneous l None l l l l V-24C l Test l

I Isolation Valve ll (% ) l l l l l l

j l Accurn- Spect N/A ll I l l l r l l l l Demon N/A ll l l l l l l l

'l ll Chemical l N/A l N/A l N/A N/A I'iSarvice: Containment l l Sp ray l l N/A l None l l l l l l l l l Spray Isolation ll l l l l ll Valve ll l l l l l l l l

j l Location: Auxiliary Bldg.ll l l l l l

l I l ll Rm. 303 ll Radiation l1.16 x 106 RADSl2.0 x 108 l

RADS l T l M-26 l Sequential Testl None l ll l l v-24C l l l Flood Level Elev: N/A ll l l

l l l _,l l Abova Flood Level: N/A ll Aging l 40 Yetam l 40 Years l I l CAL-93 l Sequential Test l None

l ll l

l l l l l Analysis l l 4 lNasdsd fors ll l l l l l l l 1l Hot Shutdown lX l ll l l l I

!l l l Subme rgencel N/A l N/A l N/A l N/A l N/A l

l None l

ll Cold Shutdown lX l ll l l l l l l l

l ll ll l l l l l l 1 i

i i

1

[  %

Facility: Devic-Besas Unit 1 U

Docket: 50-346 SW4Ut COMPONEN'4- LVALbA'41DN WUkKSHEL*4' *

  • Innex No.: sl4h-006A Prepared by; _ N N(f4'1E Lev.: 2 Osscksd by:, g h.rjf' p & / Dates Dates // // [I #.
  • , f.2l t" 3 1

l.

She 120*F test in 3subjected 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />. the valve motor operator to a transient of 300'F and 84. 7 maintained for 92 hours0.00106 days <br />0.0256 hours <br />1.521164e-4 weeks <br />3.5006e-5 months <br />, '4he valve motor operator was then subjected to a second transient of 300*Fwhich and was44 7 psia, ps 303 peaks at 218'F in 1 5 seconds. then a cooldown to 200*F and 24.7 psia, which was maintained for 24 d ays.

303 return to ambient after 19 minutes.'4he pressure in Room 303 peaks at 1716 psia in .038 seconds. The temperature in Loom

'4he conditions in locan Based on this information, more severe environment than that which would result from a postulated HELBit .

cantobe erator an concluded overall that operable throughout the test and functional after the test, it can be conclud deth tSince a the valve motor operator remained 1 functional during and after exposure to the accident environment which would C-303) the valve motor operator will remain

! result from the postulated Hela. (Reference l

l i

i I

.J i

i 1

4 t

i

t F6cility: bsvis-Bezza Unit 1 Dockst: 50-346 SYSTEM COMPONENT'gVALUATION WORKSHEET Index .vo.: 214H-007 Prepared by: _ aa Date Re v. : 2 Checksd by: I !8.3 1

NJtkR =f Date: t//VD l

ll l

l EQUIPMENT DESCRIPTIch ll l

} l. ENVIRONMENT l l l

ll Parameter l Specification l Qualification l

DOCUMENTATION REF. l,

lSystcm ll l l

l @ecificationl Qualification ll Qualification Method l Outstanding l Containment l l Ope rating l l l l Items l j l Spray System 1 Year l 1.1 Years 1 l

ll Time l l F l M-26 l '

l l 'l Simultaneous l l Plant ID No, MV15310 ll l l l l V-24C l Test None l 3

l l ll l l l

l Nde 1 l l

l l Component l lTepperature l 221.0 l l l l l 300.0 I

Valve Motor ll (*F) l l C-314 l M-26 j

l OP erator ll l l l l V-24C l Simultaneous l None l

{ IManuf acturer Limitorque ll 1 l Test l l

l l l

'l l l l ll Pressure l l l

! l Modal Number: l 17.16 l 84.7 l l SMB-0-15 ll(PSIA) l l C-314 l M-26 l

'lO/N: 374106A ll l l l Simultaneous l None l ilS/N: 182633 l l l V-24C l Test

< l Function:

ll l l l l l l Operat.es ll Relative l l l l

'l l 100.0 l 100.0 l l l Containment Spray ll Humidity l l A l M-26 l

'l Isolation Valve ll (% ) l l l l V-24C l Simultaneous l None l l Accuracy: Spect N/A ll l l l Test l l l l l l

l ll Demon: N/A ll l l l l l I

l l l llChemicri l N/A l l l

'lSarvices

  • Containment l l Sp ray -

l N/A l N/A l l l l N/A l Spray Isolation ll l l l N/A l None l

!! l l l ,

Valve .l ll l l l l l l l Location: AuxI.11ary Bldg.ll. l l l l l l 3 l l [

Rm. 314 l

) ll Radiation l1.0 x 106 RADS l2.0 x 108 l l l ll l ' RADS l T l M-26 ISequential Testl l _l Flood Level Elev N/A ll. V-24C None l l l Above Flood Level N/A ll Aging l l l l 40 Years l 40 Years l ll l l I l CAL-93 l Sequential Test l l l Needsd fort ll l l l None l l l l Analysis Hot Shutdown lX l ll l l l l l l ll Subme rgence l l l N/A l l Cold Shutdown lX l l N/A ll l l l N/A l N/A l

'N/A l l l l l None l ll l l l l l l l l -

l l l

N r l I Facility: Davis-Besca Unit 1 d O Dockst 50-346 SYS' rut COMPONLh's EVALDA't3ON WOhKLHEk's Incex Ho.: 214h-007A

~~~

Eev.: a Prepared by: Dater p // /f 1 Checked by: , @ g g g Date: ggf 2, i

1.

%e 120*Ftest subjected in 3 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />. the valve a:otor operator to a transient of 300*F and 84 7 psia for 32 minutes, followed byown a coold to

%e valve motor operator was then subjected to a second transient of 300*F and 44.7 psia, which was maintained for 92 hours0.00106 days <br />0.0256 hours <br />1.521164e-4 weeks <br />3.5006e-5 months <br />, 314 peaks at 221*F in 1.55then a cooldown to 200*F and 24.7 psia, which was maintained for 24 days. .%e temperature in Room seconds.

314 return to ambient af ter 8 minutes.%e pressure in hoom 314 peaks at 19.76 paia in .086 seconds. We conoitions in Loca Based on this information, nore severe environment than that which would result ir m a postulated HEIB.it can be concluded that the laboratory operable throughout the test and functional after the test, Since the valve motor operator remained functional C-314) during and af ter exposure to the accident environment which would result from the postulated . (Reference HElJsit c 4

l l

i i

f i

I i

I .

l,

_ - _ - _ _ _ - - _ ___

Retrieved from "https://kanterella.com/w/index.php?title=ML20083A278&oldid=2748213"