Similar Documents at Hatch |
|---|
|
LER-1981-001, /01T-0:on 801228,HPCI Steam Line Pressure Switches 1E41-N001a,c,d Actuated Outside Tech Specs.Caused by Switch Setpoint Drift.Switches Recalibr |
| Event date: |
|
|---|
| Report date: |
|
|---|
| 3211981001R01 - NRC Website |
|
text
n.m LICENSEE EVENT REPORT
[
CONTROL BLOCK: l l
l l
l l lh (F* EASE PRINT CR TYPE ALL CEEUIKED INFORMATION) ks/
I 6
lGlAlElIlHl 1 l@l 0 l 0 l - l 0 l 0 l 0 l 0 l 0 l-l 0 l 0 l@l 4 l1 l 1 l 1 l 1 l@l l
l@
0 1 7
8 9 LICENSEE CODE 14 15 LICENSE NUMBEM 25 26 LICENSE TYPE JO
$7 CAT 58 S$"CE l L l@l 0 l 5 J 01010 l 3 [2 l1 ]@l 0 l1 l 0 l 5 lI8l1l@l011l1151811l@
7 8
60 61 DOCKET NUMBER tm 6w
$YU T";ATS 74 lb REPQHT DATE 80 EVENT DESCRIPTION AND pro 8ABLE CONSEQUENCES h O 2 I On December 28, 1980, at steady state operation at 1885 fMt, HPCI Steam l
0 3 l Line Pressure Switches 1E41-N001a,c,d actuated at 104, 105 and 102.5 psig re-l 0 4 l
spectively. Tc,h Specs 3.2-2, Item 10 requires actuation 2100 psig +7.3 l
O s I psig static nead. Failure was not promptly reported as required by Tech l
IO is i I Spec Section 6.9.1.8.e.
Redundant ECCS systems were all operable. Plant i
O 7 l operation nor the health and safety of the public was not affected. This l
- O la i I is a repetitive event as last reported on R0 50-321/1980-114.
I 80 7
8 9 E
CODE S BCO E COMPONENT CODE SU8 CODE SU E
l Il B l@ [X_j@ W@ l Il Nl Sl Tl Rl Ul@ W@ @ @
7 8
9 10 11 12 13 18 19 20 SEQUENTIAL OCCURRENCE REPORT REVISION LE R EVENT YE AR REPORT NO.
CODE TYPE NO.
O,ag/RO 18 l1 l
[_j l0 l0 l1 l y
l 0l 1l g
g
[ 0j
_ 21 22 23 24 26 27 N
M 30 31 32,
KN AC 0 ON PL NT M
HOURS SB IT D FOR B.
SUPPLIE MANUFAC U (V]
[EjglJ4Z lg l35Z[g g@
[ 0 l 0l 0l 0l g g l Nl g [N j g l B l 0 l6 "lE0 l g 33_
36 31 40 41 42 43 44 47 CAUSE DESCRIPTION AND CORRECTIVE ACTIONS h i O I The cause of the event was switch setpoint drift.
The Barksdale Pressure l
li lil l Switches were recalibrated immediately upon discovery on December 28, 1980, I
i 2 l and returned to service.
Personnel were re-instructed to submit deviations I
gl promptly.
A design change request has been initiated to replace the switches l
EI with an analog trip system.
l STlSV C
% POWER OTHER STATUS dis O Y
DISCOVERY DESCRIPTION li 15 l W@ l0 l 0 l 0 l@l NA l
[B_J@l Surveillance test l
A TlVITY CO TENT r,ELEASED OF RELEASE AMOUNT OF ACTIVITY LOCATION OF RELEASE W @ W@l NA l
l NA l
l t s PERSONNEL EXPOS ES NUMBER TYPE
DESCRIPTION
[TTT110l 01 Ol@l 21@l NA l
PERSON *Jf L INJURIES NUMBER DESCRtPTION ITTil I 0l 0l 01@l NA l
7 8 9 11 12 80 kI Zl@l TYPE CESCR PT ON NA i
7 6 tr 10 1,0 ISSUuE @DESCRIPTIGN 60 63 l'c 7, L
L NA I li ll i t i ri t ii li 2 a 1
8 &
60
'9 I 2' ' N 71778I FF:UNE:
NAMF OF PREPARER -
R1012 6 0 tog,3
N 5
- - f)
LER No. : 50-32k/1981-001 v
Licensee: Georgia Power Comp'ny a
Facility: Edwin I. Hatch Docket No.: 50-321
Narrative
Report for LER 50-321/1981-001 On December 28, 1980, with the unit in steady state operation at 1885 etat, HPCI Steam Line Pressure Switches,1E41-N001 A,'C, 0 actuated at 104, 105 and 102.5 psig respectively. Tech Specs table 3.2-2, Item 10, requires actuation of 2100 psig +7.3 psig static head.
Failure of the switches was not reported promptly as required per Tech Spec Section 6.9.1.8.e.
When j
the event was discovered on January 5, 1981, deviations were reported on the failure of the switches and also the failure to report them promptly.
At the time of the event, redundant ECCS systems, RICI, ADS, LPCI and Core Spray were all operable.
Plant operation was not affected. The safety and health of the public was not affected.
This event is repetitive as last reported on LER No. 50-321/1980-114.
The cause of the event was switch setpoint drift.
The Barksdale Pressure Switches were re-calibrated immediately upon discovery of the failure on December 28, 1980 and returned to service.
Personnel were re-instructed Q
to submit deviations promptly.
A generic review revealed no inherent problems. A design change request has been initiated to replace these switches with an Analog Trip System.
This type switch is used in this application on Unit II.
Unit II is presently in refueling and these switches will be checked prior to start-up.
L 2
v a
|
|---|
|
|
| | | Reporting criterion |
|---|
| 05000366/LER-1981-001-03, /03L-0:on 810102,during Refueling,Drywell Isolation Valve 2T48/F209 Found Leaking When LLRT Performed on Drywell to Torus Dp Sys.Caused by Scratches on Valve Seat Due to Valve Closing on Debris | /03L-0:on 810102,during Refueling,Drywell Isolation Valve 2T48/F209 Found Leaking When LLRT Performed on Drywell to Torus Dp Sys.Caused by Scratches on Valve Seat Due to Valve Closing on Debris | | | 05000366/LER-1981-001, Forwards LER 81-001/03L-0.Detailed Event Analysis Encl | Forwards LER 81-001/03L-0.Detailed Event Analysis Encl | | | 05000321/LER-1981-001, Forwards LER 81-001/01T-0 | Forwards LER 81-001/01T-0 | | | 05000321/LER-1981-001-01, /01T-0:on 801228,HPCI Steam Line Pressure Switches 1E41-N001a,c,d Actuated Outside Tech Specs.Caused by Switch Setpoint Drift.Switches Recalibr | /01T-0:on 801228,HPCI Steam Line Pressure Switches 1E41-N001a,c,d Actuated Outside Tech Specs.Caused by Switch Setpoint Drift.Switches Recalibr | | | 05000366/LER-1981-002, Forwards LER 81-002/03L-0 | Forwards LER 81-002/03L-0 | | | 05000366/LER-1981-002-03, /03L-0:on 810106,reactor Core Isolation Cooling Steamline Pressure Switches 2E51-NO19A & C Were Found to Actuate Below Tech Spec Limits.Caused by Setpoint Drift. Switches Recalibr | /03L-0:on 810106,reactor Core Isolation Cooling Steamline Pressure Switches 2E51-NO19A & C Were Found to Actuate Below Tech Spec Limits.Caused by Setpoint Drift. Switches Recalibr | | | 05000321/LER-1981-002, Forwards LER 81-002/03L-0 | Forwards LER 81-002/03L-0 | | | 05000321/LER-1981-002-03, /03L-0:on 810101,more than 5 Gpm Leaked Into Drywell W/Reactor at 401 Mwe.Caused by Mechanical Seal Leaking Water from Reactor Recirculation pump,1B31-C001A. Seal Replaced | /03L-0:on 810101,more than 5 Gpm Leaked Into Drywell W/Reactor at 401 Mwe.Caused by Mechanical Seal Leaking Water from Reactor Recirculation pump,1B31-C001A. Seal Replaced | | | 05000366/LER-1981-003-03, /03L-0:on 810223,core Max Fraction of Limiting Power Density Found to Be Greater than Frtp During Startup. Caused by Time Delays for Adjusting Rods,Running Transient Incore Probe Scans & Processing Time for Computer | /03L-0:on 810223,core Max Fraction of Limiting Power Density Found to Be Greater than Frtp During Startup. Caused by Time Delays for Adjusting Rods,Running Transient Incore Probe Scans & Processing Time for Computer | | | 05000321/LER-1981-003-03, /03L-0:on 810130,HPCI Governor Valve Stuck Open. Caused by Lift Rod Being Bent & Galled Due to Interference Between Lift Rod Fork Connector & Valve Lever.Damaged Rod Replaced,Upper Guide Bushing Honed & Fork Modified | /03L-0:on 810130,HPCI Governor Valve Stuck Open. Caused by Lift Rod Being Bent & Galled Due to Interference Between Lift Rod Fork Connector & Valve Lever.Damaged Rod Replaced,Upper Guide Bushing Honed & Fork Modified | | | 05000366/LER-1981-003, Forwards LER 81-003/03L-0 | Forwards LER 81-003/03L-0 | | | 05000321/LER-1981-003, Forwards LER 81-003/03L-0 | Forwards LER 81-003/03L-0 | | | 05000366/LER-1981-004, Forwards LER 81-004/03L-0 | Forwards LER 81-004/03L-0 | | | 05000366/LER-1981-004-03, /03L-0:on 810122,nozzle Loads Found Exceeding Vendor Allowables for Reactor Core Isolation Cooling Steam Turbine During Reanalysis of Piping & Hangers Per IE Bulletin 79-14.Caused by Ae Error in Sys Design | /03L-0:on 810122,nozzle Loads Found Exceeding Vendor Allowables for Reactor Core Isolation Cooling Steam Turbine During Reanalysis of Piping & Hangers Per IE Bulletin 79-14.Caused by Ae Error in Sys Design | | | 05000321/LER-1981-004, Forwards LER 81-004/03L-0 | Forwards LER 81-004/03L-0 | | | 05000321/LER-1981-004-03, /03L-0:on 810106,w/unit in Steady State Power Operation,Qa Audit Showed That Temporary Procedure Change HNP-818 Was Not Approved by Plant Manager within 14 Days of Implementation.Caused by Deletion of Requirement | /03L-0:on 810106,w/unit in Steady State Power Operation,Qa Audit Showed That Temporary Procedure Change HNP-818 Was Not Approved by Plant Manager within 14 Days of Implementation.Caused by Deletion of Requirement | | | 05000366/LER-1981-005-01, /01T-0:on 810126,reactor Pressure Vessel Core Spray Loops Discovered Inoperable.Caused by Procedure HNP-2-1230 Being Performed,Closing Manual Injection Valves 2E21-F007A & B.Valves Reopened & Procedure Changed | /01T-0:on 810126,reactor Pressure Vessel Core Spray Loops Discovered Inoperable.Caused by Procedure HNP-2-1230 Being Performed,Closing Manual Injection Valves 2E21-F007A & B.Valves Reopened & Procedure Changed | | | 05000366/LER-1981-005, Forwards LER 81-005/01T-0 | Forwards LER 81-005/01T-0 | | | 05000321/LER-1981-005-03, /03L-0:on 810113,during Steady State Operation, Drywell Temp Recorder IT47-R612 Found to Be Inoperative. Caused by Misalignment of Cam Follower Contact W/Main Programming Cam.Follower Adjusted to Maintain Contact W/Cam | /03L-0:on 810113,during Steady State Operation, Drywell Temp Recorder IT47-R612 Found to Be Inoperative. Caused by Misalignment of Cam Follower Contact W/Main Programming Cam.Follower Adjusted to Maintain Contact W/Cam | | | 05000321/LER-1981-005, Forwards LER 81-005/03L-0 | Forwards LER 81-005/03L-0 | | | 05000366/LER-1981-006, Forwards LER 81-006/03L-0 | Forwards LER 81-006/03L-0 | | | 05000366/LER-1981-006-03, /03L-0:on 810123,standby Gas Treatment Sys Filter train,2T46-D001A,removed Less Halogenated Hydrocarbon Refrigerant Gas than Required by Tech Specs During Testing by Vendor.Caused by Defective Charcoal in Filter Bed | /03L-0:on 810123,standby Gas Treatment Sys Filter train,2T46-D001A,removed Less Halogenated Hydrocarbon Refrigerant Gas than Required by Tech Specs During Testing by Vendor.Caused by Defective Charcoal in Filter Bed | | | 05000321/LER-1981-006, Forwards LER 81-006/03L-0 | Forwards LER 81-006/03L-0 | | | 05000321/LER-1981-006-03, /03L-0:on 810119,standby Liquid Control Pump a Discharge Relief Valve 1C41-F029A Operated Outside Tech Spec.Caused by Setpoint Drift.Valve Reset | /03L-0:on 810119,standby Liquid Control Pump a Discharge Relief Valve 1C41-F029A Operated Outside Tech Spec.Caused by Setpoint Drift.Valve Reset | | | 05000321/LER-1981-007, Forwards LER 81-007/03L-0 | Forwards LER 81-007/03L-0 | | | 05000321/LER-1981-007-03, /03L-0:on 810203 & 19,unit 1 Cable Spread Room Sprinkler Sys Was Inoperable for Period Greater than 14 Days & Special Repts Were Not Issued.Caused by Personnel Error. Personnel Reinstructed | /03L-0:on 810203 & 19,unit 1 Cable Spread Room Sprinkler Sys Was Inoperable for Period Greater than 14 Days & Special Repts Were Not Issued.Caused by Personnel Error. Personnel Reinstructed | | | 05000366/LER-1981-007-03, /03L-0:on 810126,discovered That on 810124 & 25 Reactor Coolant Sampled from Wrong Sample Line.Caused by Lack of Communication Among Personnel Who Collect & Analyze Reactor Coolant.Personnel Instructed & Coolant Sampled | /03L-0:on 810126,discovered That on 810124 & 25 Reactor Coolant Sampled from Wrong Sample Line.Caused by Lack of Communication Among Personnel Who Collect & Analyze Reactor Coolant.Personnel Instructed & Coolant Sampled | | | 05000366/LER-1981-007, Forwards LER 81-007/03L-0 | Forwards LER 81-007/03L-0 | | | 05000321/LER-1981-008-03, /03L-0:on 810216,in Normal Operations at 309 Mwt, 1E51-N012A,B,C & D Actuated at 10.2,11.3,11.2 & 10.7 Psig, Respectively.Caused by Switch Setpoint Drift.Barksdale Switches Recalibr | /03L-0:on 810216,in Normal Operations at 309 Mwt, 1E51-N012A,B,C & D Actuated at 10.2,11.3,11.2 & 10.7 Psig, Respectively.Caused by Switch Setpoint Drift.Barksdale Switches Recalibr | | | 05000321/LER-1981-008, Forwards LER 81-008/03L-0 | Forwards LER 81-008/03L-0 | | | 05000366/LER-1981-008, Forwards LER 81-008/03L-0 | Forwards LER 81-008/03L-0 | | | 05000366/LER-1981-008-03, /03L-0:on 810119,pressure Switches Were Found Out of Tolerance.Caused by Setpoint Drift.Pressure Switches Recalibr & Returned to Svc | /03L-0:on 810119,pressure Switches Were Found Out of Tolerance.Caused by Setpoint Drift.Pressure Switches Recalibr & Returned to Svc | | | 05000366/LER-1981-009-03, /03L-0:on 810212,reactor Coolant Not Analyzed Once Per 24-h as Required by Tech Spec.Caused by Reactor Vessel Hydro During Time Period When Next Conductivity Measurement Was to Be Taken | /03L-0:on 810212,reactor Coolant Not Analyzed Once Per 24-h as Required by Tech Spec.Caused by Reactor Vessel Hydro During Time Period When Next Conductivity Measurement Was to Be Taken | | | 05000366/LER-1981-009, Forwards LER 81-009/03L-0 | Forwards LER 81-009/03L-0 | | | 05000321/LER-1981-009-03, /03L-0:on 810206,nitrogen Storage Tank Inventory Went Below 2000 Gallon Tech Spec Requirement.Caused by Supplier Delaying Shipment.Shipment Received.Supplier Instructed Not to Delay Shipments | /03L-0:on 810206,nitrogen Storage Tank Inventory Went Below 2000 Gallon Tech Spec Requirement.Caused by Supplier Delaying Shipment.Shipment Received.Supplier Instructed Not to Delay Shipments | | | 05000321/LER-1981-009, Forwards LER 81-009/03L-0 | Forwards LER 81-009/03L-0 | | | 05000366/LER-1981-010, Forwards LER 81-010/03L-0 | Forwards LER 81-010/03L-0 | | | 05000366/LER-1981-010-03, /03L-0:on 810222,reactor Core Isolation Cooling Auto Flow Controller Did Not Control Turbine Properly While in Auto Position During Quickstart Test.Caused by Loose Ribbon Connector on Flow Control M-4 Station | /03L-0:on 810222,reactor Core Isolation Cooling Auto Flow Controller Did Not Control Turbine Properly While in Auto Position During Quickstart Test.Caused by Loose Ribbon Connector on Flow Control M-4 Station | | | 05000321/LER-1981-010, Forwards LER 81-010/01T-0 | Forwards LER 81-010/01T-0 | | | 05000321/LER-1981-010-01, /01T-0:on 810211,AE Reported That Diesel Generator 1A,1C,2A,2B & 1B Outlet Svc Water Piping & Associated Seismic Supports Exceeded Tech Spec.Caused by Design Omission.Design Mods Made | /01T-0:on 810211,AE Reported That Diesel Generator 1A,1C,2A,2B & 1B Outlet Svc Water Piping & Associated Seismic Supports Exceeded Tech Spec.Caused by Design Omission.Design Mods Made | | | 05000321/LER-1981-011-03, /03L-0:on 810214,liquid Radwaste Sample Tank, WSTB1,discharged Prior to Analysis,Contrary to Ets.Caused by Technician Error in Collecting Unit 2 Radwaste Sample in Prelabeled Unit 1 WSTB-1 Bottle | /03L-0:on 810214,liquid Radwaste Sample Tank, WSTB1,discharged Prior to Analysis,Contrary to Ets.Caused by Technician Error in Collecting Unit 2 Radwaste Sample in Prelabeled Unit 1 WSTB-1 Bottle | | | 05000321/LER-1981-011, Forwards LER 81-011/03L-0 | Forwards LER 81-011/03L-0 | | | 05000366/LER-1981-011-03, /03L-0:on 810204,nonrated Window Discovered in 3-h Rated Fire Wall.Caused by Design,Mfg & Const/Installation Error.Direct Conversion Reactor Study 81-48 Submitted & Fire Watch Established | /03L-0:on 810204,nonrated Window Discovered in 3-h Rated Fire Wall.Caused by Design,Mfg & Const/Installation Error.Direct Conversion Reactor Study 81-48 Submitted & Fire Watch Established | | | 05000366/LER-1981-011, Forwards LER 81-011/03L-0 | Forwards LER 81-011/03L-0 | | | 05000321/LER-1981-012-03, /03L-0:on 810228,turbine Failed to Trip on Overspeed.Caused by Dried Lubrication Around Overspeed Tripping Mechanisms Causing Binding.Mechanism Disassembled, Cleaned,Relubricated & Reassembled | /03L-0:on 810228,turbine Failed to Trip on Overspeed.Caused by Dried Lubrication Around Overspeed Tripping Mechanisms Causing Binding.Mechanism Disassembled, Cleaned,Relubricated & Reassembled | | | 05000321/LER-1981-012, Forwards LER 81-012/03L-0 | Forwards LER 81-012/03L-0 | | | 05000366/LER-1981-012-02, /02L-0:on 810224,during Surveillance Testing, Standby Liquid Control Pump B Failed to Start,Losing Squibb Valve B Continuity.Caused by Failure of Control Fuse in Circuit Breaker.Fuse Replaced | /02L-0:on 810224,during Surveillance Testing, Standby Liquid Control Pump B Failed to Start,Losing Squibb Valve B Continuity.Caused by Failure of Control Fuse in Circuit Breaker.Fuse Replaced | | | 05000366/LER-1981-012, Forwards LER 81-012/02L-0 | Forwards LER 81-012/02L-0 | | | 05000366/LER-1981-013, Forwards LER 81-013/03L-0 | Forwards LER 81-013/03L-0 | | | 05000321/LER-1981-013-03, /03L-0:on 810228,HPCI Sys Was Declared Inoperable When Oil Line Near Rear Bearing Broke.Caused by Person Stepping on Oil Line & Turbine Vibration Finishing Separation.Line Repaired | /03L-0:on 810228,HPCI Sys Was Declared Inoperable When Oil Line Near Rear Bearing Broke.Caused by Person Stepping on Oil Line & Turbine Vibration Finishing Separation.Line Repaired | |
|