ML101241010

From kanterella
Jump to navigation Jump to search
CP-2010-04-Final Outlines
ML101241010
Person / Time
Site: Comanche Peak  Luminant icon.png
Issue date: 03/29/2010
From: Clyde Osterholtz
Division of Reactor Safety IV
To:
References
Download: ML101241010 (31)
v • d • e


Text

ES-401 PWR Examination Outline Form ES-401-2 Facility: CPNPP 1 & 2 Date of Exam: 03/29/10 RO K/A Category Points SRO-Only Points Tier Group K K K K K K A A A A G Total A2 G* Total 1 2 3 4 5 6 1 2 3 4 *

1. Emergency 1 1 3 4 3 4 3 18 1 5 6

& Abnormal 2 2 2 1 1 2 1 9 1 3 4 Plant Evolutions Tier Totals 3 5 5 4 6 4 27 2 8 10 1 3 2 3 3 2 3 3 2 3 2 2 28 3 2 5

2. Plant Systems 2 1 1 1 1 1 1 1 2 0 0 1 10 2 1 0 3 Tier Totals 4 3 4 4 3 4 4 4 3 2 3 38 6 2 8
3. Generic Knowledge and Abilities 1 2 3 4 1 2 3 4 Categories 10 7 3 2 2 3 2 1 2 2 Note: 1. Ensure that at least two topics from every applicable K/A category are sampled within each tier of the RO and SRO-only outlines (i.e., except for one category in Tier 3 of the SRO-only outline, the Tier Totals in each K/A category shall not be less than two).
2. The point total for each group and tier in the proposed outline must match that specified in the table.

The final point total for each group and tier may deviate by +/-1 from that specified in the table based on NRC revisions. The final RO exam must total 75 points and the SRO-only exam must total 25 points.

3. Systems / evolutions within each group are identified on the associated outline; systems or evolutions that do not apply at the facility should be deleted and justified; operationally important, site-specific systems / evolutions that are not included on the outline should be added. Refer to Section D.1.b of ES-401 for guidance regarding the elimination of inappropriate K/A statements.
4. Select topics from as many systems and evolutions as possible; sample every system or evolution in the group before selecting a second topic for any system or evolution.
5. Absent a plant-specific priority, only those K/As having an importance rating (IR) of 2.5 or higher shall be selected. Use the RO and SRO ratings for the RO and SRO-only portions, respectively.
6. Select SRO topics for Tiers 1 and 2 from the shaded systems and K/A categories.

7.* The generic (G) K/As in Tiers 1 and 2 shall be selected from Section 2 of the K/A Catalog, but the topics must be relevant to the applicable evolution or system. Refer to Section D.1.b of ES-401 for the applicable K/As.

8. On the following pages, enter the K/A numbers, a brief description of each topic, the topics importance ratings (IRs) for the applicable license level, and the point totals (#) for each system and category. Enter the group and tier totals for each category in the table above; if fuel handling equipment is sampled in other than Category A2 or G* on the SRO-only exam, enter it on the left side of Column A2 for Tier 2, Group 2 (Note #1 does not apply). Use duplicate pages for RO and SRO-only exams.
9. For Tier 3, select topics from Section 2 of the K/A catalog, and enter the K/A numbers, descriptions, IRs, and point totals (#) on Form ES-401-3. Limit SRO selections to K/As that are linked to 10 CFR 55.43.

Page 1 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Emergency and Abnormal Plant Evolutions - Tier 1 Group 1 E/APE # / Name / Safety Function K1 K2 K3 A1 A2 G Number K/A Topic(s) Imp. Q#

Emergency Procedures / Plan: Knowledge of the parameters and logic used to assess the status of safety functions, such as reactivity control, 008 / Pressurizer Vapor Space Accident / 3 X 2.4.21 4.6 76 core cooling and heat removal, reactor coolant system integrity, containment conditions, radioactivity release control, etc.

Ability to determine or interpret the following as they apply to a Large Break LOCA: Actions to be 011 / Large Break LOCA / 3 X EA2.01 4.7 77 taken, based on RCS temperature and pressure

- saturated or superheated Equipment Control: Ability to apply Technical 015/17 / RCP Malfunctions / 4 X 2.2.40 4.7 78 Specifications for a system Conduct of Operations: Ability to evaluate plant performance and make operational judgments 025 / Loss of RHR System / 4 X 2.1.7 4.7 79 based on operating characteristics, reactor behavior, and instrument interpretation Conduct of Operations: Ability to interpret and 055 / Station Blackout / 6 X 2.1.20 4.6 80 execute procedure steps Equipment Control: Knowledge of limiting 026 / Loss of Component Cooling Water / 8 X 2.2.22 4.7 81 conditions for operations and safety limits.

Ability to determine and interpret the following as 065 / Loss of Instrument Air / 8 X AA2.08 they apply to the Loss of Instrument Air: Failure 2.9 39 modes of air-operated equipment Knowledge of the reasons for the following responses as they apply to the Pressurizer 008 / Pressurizer Vapor Space Accident / 3 X AK3.05 4.0 40 Vapor Space Accident: ECCS termination or throttling criteria Knowledge of the reasons for the following responses as they apply to Loss of Vital AC 057 / Loss of Vital AC Instrument Bus / 6 X AK3.01 4.1 41 Instrument Bus: Actions contained in EOP for loss of vital AC instrument bus Emergency Procedures/Plan: Ability to verify 058 / Loss of DC Power / 6 X 2.4.50 system alarm setpoints and operate controls 4.2 42 identified in the alarm response manual Page 2 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Emergency and Abnormal Plant Evolutions - Tier 1 Group 1 E/APE # / Name / Safety Function K1 K2 K3 A1 A2 G Number K/A Topic(s) Imp. Q#

Ability to determine and interpret the following as they apply to the Loss of Secondary Heat Sink:

W/E05 / Inadequate Heat Transfer - Loss X EA2.2 Adherence to appropriate procedures and 3.7 43 of Secondary Heat Sink / 4 operation within the limitations in the facility license and amendments Knowledge of the reasons for the following 007 / Reactor Trip - Stabilization - Recovery / 1 X EK3.01 responses as they apply to the reactor trip: 4.0 44 Actions contained in EOP for reactor trip Knowledge of the operational implications of the 038 / Steam Generator Tube Rupture / 3 X EK1.03 following concepts as they apply to the SGTR: 3.9 45 Natural circulation Ability to operate and/or monitor the following as 009 / Small Break LOCA / 3 X EA1.09 3.6 46 they apply to a small break LOCA: RCP Knowledge of the interrelations between 077 / Generator Voltage and Electric Grid X AK2.06 Generator Voltage and Electric Grid 3.9 47 Disturbances / 6 Disturbances and the following: Reactor power Knowledge of the reasons for the following responses as they apply to the Pressurizer 027 / Pressurizer Pressure Control Malfunction / 3 X AK3.03 3.7 48 Pressure Control Malfunction: Actions contained in EOP for PZR PCS malfunction Ability to determine and interpret the following as they apply to the Loss of Reactor Coolant 022 / Loss of Reactor Coolant Makeup / 2 X AA2.04 2.9 49 Makeup: How long pressurizer level can be maintained within limits Conduct of Operations: Knowledge of the W/E11 / Loss of Emergency Coolant Recirculation X 2.1.28 purpose and function of major system 4.1 50

/4 components and controls Knowledge of the interrelations between the LOCA Outside Containment and the following:

Components, and functions of control and safety W/E04 / LOCA Outside Containment / 3 X EK2.1 3.5 51 systems, including instrumentation, signals, interlocks, failure modes, and automatic and manual features Ability to determine and interpret the following as they apply to the Loss of Component Cooling 026 / Loss of Component Cooling Water / 8 X AA2.03 Water: The valve lineups necessary to restart 2.6 52 the CCWS while bypassing the portion of the system causing the abnormal condition Page 3 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Emergency and Abnormal Plant Evolutions - Tier 1 Group 1 E/APE # / Name / Safety Function K1 K2 K3 A1 A2 G Number K/A Topic(s) Imp. Q#

Ability to operate and/or monitor the following as they apply to the Loss of Main Feedwater:

054 / Loss of Main Feedwater / 4 X AA1.01 4.5 53 AFW controls, including the use of alternate AFW sources Knowledge of the operational implications of the following as they apply to the ATWS: Definition 029 / ATWS / 1 X EK1.05 2.8 54 of negative temperature coefficient as applied to large PWR coolant systems W/E12 / Uncontrolled Depressurization of all Emergency Procedures/Plan: Knowledge of X 2.4.11 4.0 55 Steam Generators / 4 abnormal condition procedures Ability to operate and/or monitor the following as 025 / Loss of RHR System / 4 X AA1.12 they apply to the Loss of Residual Heat 3.6 56 Removal System: RCS temperature indicators K/A Category Point Totals: 1 3 4 3 4/1 3/5 Group Point Total: 18 / 6 Page 4 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Emergency and Abnormal Plant Evolutions - Tier 1 Group 2 E/APE # / Name / Safety Function K1 K2 K3 A1 A2 G Number K/A Topic(s) Imp. Q#

Emergency Procedures / Plan: Knowledge of the W/E01 & E02 / Rediagnosis & SI Termination / 3 X 2.4.18 4.0 82 specific bases for EOPs Ability to determine and interpret the following as they apply to the Containment Flooding: Facility W/E15 / Containment Flooding / 5 X EA2.1 conditions and selection of appropriate 3.2 83 procedures during abnormal and emergency operations Equipment Control: Knowledge of conditions W/E14 / High Containment Pressure / 5 X 2.2.38 4.5 84 and limitations in the facility license Equipment Control: Knowledge of limiting 033 / Loss of Intermediate Range NI / 7 X 2.2.22 4.7 85 conditions for operations and safety limits Knowledge of the operational implications of the following concepts as they apply to Area 061 / ARM System Alarms / 7 X AK1.01 2.5 57 Radiation Monitoring System Alarms: Detector limitations Ability to determine and interpret the following as they apply to the Continuous Rod Withdrawal:

001 / Continuous Rod Withdrawal / 1 X AA2.03 4.5 58 Proper actions to be taken if automatic safety functions have not taken place Ability to operate and/or monitor the following as 037 / Steam Generator Tube Leak / 3 X AA1.13 they apply to the Steam Generator Tube Leak: 3.9 59 SG blowdown radiation monitors Ability to determine and interpret the following as 076 / High Reactor Coolant Activity / 9 X AA2.03 they apply to the High Reactor Coolant Activity: 2.5 60 RCS radioactivity level meter Knowledge of the interrelations between the Steam Generator Overpressure and the following: Components, and functions and W/E13 / Steam Generator Overpressure / 4 X EK2.1 3.0 61 control of safety systems, including instrumentation, signals, interlocks, failure modes, and automatic and manual features Equipment Control: Ability to interpret control room indications to verify the status in operation 033 / Loss of Intermediate Range NI / 7 X 2.2.44 of a system, and understand how operator 4.2 62 actions and directives affect plant and system conditions Page 5 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Emergency and Abnormal Plant Evolutions - Tier 1 Group 2 E/APE # / Name / Safety Function K1 K2 K3 A1 A2 G Number K/A Topic(s) Imp. Q#

Knowledge of the reasons for the following responses as they apply to Emergency Boration:

024 / Emergency Boration / 1 X AK3.02 4.2 63 Actions contained in EOP for emergency boration Knowledge of the operational implications of the 067 / Plant Fire on Site / 8 X AK1.02 following concepts as they apply to Plant Fire on 3.1 64 Site: Fire fighting Knowledge of the interrelations between the Inoperable/Stuck Control Rod and the following:

005 / Inoperable/Stuck Control Rod / 1 X AK2.02 2.5 65 Breakers, relays, disconnects, and control room switches K/A Category Point Totals: 2 2 1 1 2/1 1/3 Group Point Total: 9/4 Page 6 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Plant Systems - Tier 2 Group 1 System # / Name K1 K2 K3 K4 K5 K6 A1 A2 A3 A4 G Number K/A Topics Imp. Q#

Ability to (a) predict the impacts of the following malfunctions or operations on the RPS; and (b) based on those predictions, use procedures to 012 / Reactor Protection X A2.05 correct, control, or mitigate the consequences 3.2 86 of those malfunctions or operations: Faulty or erratic operation of detectors and function generators Ability to (a) predict the impacts of the following malfunctions or operations on the CSS; and (b) based on those predictions, use procedures to 026 / Containment Spray X A2.08 correct, control, or mitigate the consequences 3.7 87 of those malfunctions or operations: Safe securing of containment spray when it can be done Emergency Procedures/Plan: Knowledge of low power/shutdown implications in accident 059 / Main Feedwater X 2.4.9 4.2 88 (e.g., loss of coolant accident or loss of residual heat removal) mitigation strategies Ability to (a) predict the impacts of the following malfunctions or operations on the AC distribution system; and (b) based on those 062 / AC Electrical X A2.10 predictions, use procedures to correct, control, 3.3 89 Distribution or mitigate the consequences of those malfunctions or operations: Effects of switching power supplies on instruments and controls Emergency Procedures/Plan: Ability to 007 / Pressurizer diagnose and recognize trends in an accurate X 2.4.47 4.2 90 Relief/Quench Tank and timely manner utilizing the appropriate control room reference material Ability to predict and/or monitor changes in parameters (to prevent exceeding design 003 / Reactor Coolant Pump X A1.09 2.8 1 limits) associated with operating the RCPS controls including: Seal flow and D/P Knowledge of the effect that a loss or 004 / Chemical and Volume malfunction of the following will have on the X K6.20 2.5 2 Control CVCS components: Function of demineralizer, including boron loading and temperature limits Knowledge of bus power supplies to the 005 / Residual Heat Removal X K2.01 3.0 3 following: RHR pumps Page 7 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Plant Systems - Tier 2 Group 1 System # / Name K1 K2 K3 K4 K5 K6 A1 A2 A3 A4 G Number K/A Topics Imp. Q#

Knowledge of the operational implications of 006 / Emergency Core X K5.05 the following concepts as they apply to ECCS: 3.4 4 Cooling Effects of pressure on a solid system Knowledge of the PRTS design feature(s) 007 / Pressurizer Relief /

X K4.01 and/or interlock(s) that provide for the 2.6 5 Quench Tank following: Quench tank cooling Ability to manually operate and/or monitor in 008 / Component Cooling X A4.07 the control room: Control of minimum level in 2.9 6 Water the CCWS surge tank Knowledge of the operational implications of 010 / Pressurizer Pressure the following concepts as they apply to the X K5.01 3.5 7 Control PZR PCS: Determination of condition of fluid in PZR, using steam tables 010 / Pressurizer Pressure Conduct of Operations: Ability to explain and X 2.1.32 3.8 8 Control apply system limits and precautions Knowledge of the effect that a loss or 012 / Reactor Protection X K3.01 malfunction of the RPS will have on the 3.9 9 following: CRDS Ability to monitor automatic operation of the 013 / Engineered Safety X A3.02 ESFAS including: Operation of actuated 4.1 10 Features Actuation equipment Knowledge of the effect that a loss or 013 / Engineered Safety X K6.01 malfunction of the following will have on the 2.7 11 Features Actuation ESFAS: Sensors and detectors Knowledge of the effect that a loss or malfunction of the CCS will have on the 022 / Containment Cooling X K3.02 3.0 12 following: Containment instrumentation readings Knowledge of CSS design feature(s) and/or interlock(s) that provide for the following:

026 / Containment Spray X K4.01 4.2 13 Source of water for CSS, including recirculation phase after LOCA Page 8 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Plant Systems - Tier 2 Group 1 System # / Name K1 K2 K3 K4 K5 K6 A1 A2 A3 A4 G Number K/A Topics Imp. Q#

Ability to predict and/or monitor changes in parameters (to prevent exceeding design 039 / Main and Reheat Steam X A1.05 3.2 14 limits) associated with operating the MRSS controls including: RCS Tave Knowledge of the physical connections and/or 039 / Main and Reheat Steam X K1.05 cause-effect relationships between the MRSS 2.5 15 and the following systems: Turbine generator Equipment Control: Knowledge of conditions 059 / Main Feedwater X 2.2.38 3.6 16 and limitations in the facility license Ability to (a) predict the impacts of the following malfunctions or operations on the AFW; and 061 / Auxiliary/Emergency (b) based on those predictions, use procedures X A2.04 3.4 17 Feedwater to correct, control, or mitigate the consequences of those malfunctions or operations: Pump failure or improper operation 061 / Auxiliary/Emergency Knowledge of bus power supplies to the X K2.02 3.7 18 Feedwater following: AFW electric drive pumps Knowledge of the physical connections and/or 062 / AC Electrical cause-effect relationships between the AC X K1.04 3.7 19 Distribution distribution system and the following systems:

Offsite power sources Ability to predict and/or monitor changes in parameters (to prevent exceeding design 062 / AC Electrical X A1.01 limits) associated with operating the AC 3.4 20 Distribution distribution system controls including:

Significance of diesel generator load limits Ability to monitor automatic operation of the 063 / DC Electrical DC electrical system, including: Meters, X A3.01 2.7 21 Distribution annunciators, dials, recorders, and indicating lights Knowledge of the effect that a loss or 064 / Emergency Diesel X K6.07 malfunction of the following will have on the 2.7 22 Generator EDG system: Air receivers Page 9 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Plant Systems - Tier 2 Group 1 System # / Name K1 K2 K3 K4 K5 K6 A1 A2 A3 A4 G Number K/A Topics Imp. Q#

Ability to (a) predict the impacts of the following malfunctions or operations on the PRM 073 / Process Radiation system; and (b) based on those predictions, X A2.02 2.7 23 Monitoring use procedures to correct, control, or mitigate the consequences of those malfunctions or operations: Detector failure Ability to monitor automatic operation of the 076 / Service Water X A3.02 3.7 24 SWS, including: Emergency heat loads Knowledge of SWS design feature(s) and/or 076 / Service Water X K4.06 interlock(s) that provide for the following: 2.8 25 Service water train separation Ability to manually operate and/or monitor in 078 / Instrument Air X A4.01 3.1 26 the control room: Pressure gauges Knowledge of the effect that a loss or malfunction of the containment system will 103 / Containment X K3.01 3.3 27 have on the following: Loss of containment integrity under shutdown conditions Knowledge of the physical connections and/or cause-effect relationships between the 103 / Containment X K1.02 3.9 28 containment system and the following systems:

Containment isolation/containment integrity K/A Category Point Totals: 3 2 3 3 2 3 3 2/3 3 2 2/2 Group Point Total: 28 / 5 Page 10 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Plant Systems - Tier 2 Group 2 System # / Name K1 K2 K3 K4 K5 K6 A1 A2 A3 A4 G Number K/A Topics Imp. Q#

Ability to (a) predict the impacts of the following malfunctions or operations on the Liquid Radwaste System; and (b) based on 068 / Liquid Radwaste X A2.04 those predictions, use procedures to correct, 3.3 91 control, or mitigate the consequences of those malfunctions or operations: Failure of automatic isolation 034 / Fuel Handling Ability to manually operate and/or monitor in X A4.02 3.9 92 Equipment the control room: Neutron levels Ability to (a) predict the impacts of the following malfunctions or operations on the Fire Protection System; and (b) based on 086 / Fire Protection X A2.01 those predictions, use procedures to correct, 3.1 93 control, or mitigate the consequences of those malfunctions or operations: Manual shutdown of the FPS Knowledge of the operational implications of 072 / Area Radiation the following concepts as they apply to the X K5.02 2.5 29 Monitoring ARM system: Radiation intensity changes with source distance 011 / Pressurizer Level Knowledge of bus power supplies to the X K2.02 3.1 30 Control following: PZR heaters Knowledge of the physical connections and/or cause-effect relationships between 056 / Condensate X K1.03 2.6 31 the Condensate System and the following systems: MFW Ability to predict and/or monitor changes in parameters (to prevent exceeding design 071 / Waste Gas Disposal X A1.06 limits) associated with operating the Waste 2.5 32 Gas Disposal System controls including:

Ventilation system Ability to (a) predict the impacts of the following malfunctions or operations on the circulating water system; and (b) based on 075 / Circulating Water X A2.02 those predictions, use procedures to correct, 2.5 33 control, or mitigate the consequences of those malfunctions or operations: Loss of circulating water pumps Page 11 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 CPNPP 1 & 2 Form ES-401-2 NRC Written Examination Outline Plant Systems - Tier 2 Group 2 System # / Name K1 K2 K3 K4 K5 K6 A1 A2 A3 A4 G Number K/A Topics Imp. Q#

Knowledge of CRDS design feature(s) and 001 / Control Rod Drive X K4.03 or interlock(s) which provide for the 3.5 34 following: Rod control logic Knowledge of the effect of a loss or 055 / Condenser Air Removal X K3.01 malfunction of the CARS will have on the 2.5 35 following: Main condenser Ability to (a) predict the impacts of the following malfunctions or operations on the SG; and (b) based on those predictions, use 035 / Steam Generator X A2.02 4.2 36 procedures to correct, control, or mitigate the consequences of those malfunctions or operations: Reactor trip/turbine trip Knowledge of the effect of a loss or 017 / In-core Temperature X K6.01 malfunction of the following ITM system 2.7 37 Monitor components: Sensors and detectors Equipment Control: Knowledge of conditions 014 / Rod Position Indication X 2.2.38 3.6 38 and limitations in the facility license K/A Category Point Totals: 1 1 1 1 1 1 1 2/2 0 0 / 1 1 / 0 Group Point Total: 10 / 3 Page 12 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 Generic Knowledge and Abilities Outline (Tier3) Form ES-401-3 Facility: CPNPP 1 & 2 Date of Exam: 03/29/10 Category K/A # Topic RO SRO-Only IR # IR #

2.1.32 Ability to explain and apply system limits and precautions 4.0 94 2.1.23 Ability to perform specific system and integrated plant 4.4 95 procedures during all modes of plant operation

1. 2.1.39 Knowledge of conservative decision making practices 3.6 66 Conduct 2.1.29 Knowledge of how to conduct system lineups, such as 4.1 67 of Operations valves, breakers, switches, etc.

2.1.19 Ability to use plant computers to evaluate system or 3.9 68 component status Subtotal 3 2 2.2.38 Knowledge of conditions and limitations in the facility 4.5 96 license 2.

Equipment 2.2.12 Knowledge of surveillance procedures 3.7 69 Control 2.2.25 Knowledge of the bases in technical specifications for 3.2 70 limiting conditions for operations and safety limits Subtotal 2 1 2.3.15 Knowledge of radiation monitoring systems, such as fixed 3.1 97 radiation monitors and alarms, portable survey instruments, personnel monitoring equipment, etc.

3. 2.3.6 Ability to approve release permit 3.8 98 Radiation 2.3.4 Knowledge of radiation exposure limits under normal or 3.2 71 Control emergency conditions 2.3.5 Ability to use radiation monitoring systems, such as fixed 2.9 72 radiation monitors and alarms, portable survey instruments, personnel monitoring equipment, etc.

Subtotal 2 2 2.4.41 Knowledge of emergency action level thresholds and 4.6 99 classifications 2.4.38 Ability to take actions called for in the facility emergency 4.4 100 plan, including supporting or acting as emergency

4. coordinator if required Emergency Procedures / 2.4.20 Knowledge of the operational implications of EOP 3.8 73 Plan warnings, cautions, and notes 2.4.13 Knowledge of crew roles and responsibilities during EOP 4.0 74 usage 2.4.5 Knowledge of the organization of the operating 3.7 75 procedures network for normal, abnormal and emergency evolutions Subtotal 3 2 Tier 3 Point Total 10 7 Page 13 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 Record of Rejected K/As Form ES-401-4 Tier / Randomly Reason for Rejection Group Selected K/A W/E14 Q #84 - This specific K/A does not apply as there are no local operator tasks 1/2 performed for the High Containment Pressure EOP at CPNPP. Randomly G 2.4.35 reselected W/E14 G 2.2.38.

Q #57 - This specific K/A does not apply as there are no automatic actions for 1/2 061 AA1.01 Area Radiation Monitors at CPNPP. Selected 061 AK1.01 for skyscraper balance.

Q #29 - This specific K/A does not apply as Containment Ventilation Isolation 2/2 072 K3.01 is actuated by a Process vice Area Radiation Monitor at CPNPP. Randomly reselected 072 K5.02.

Q #33 - Unable to develop a psychometrically sound question that 2/2 075 A4.01 discriminates at the RO level. Reselected 075 A2.02.

Q #35 - This specific K/A does not apply as there is no automatic diversion of Condenser Air Removal System exhaust at CPNPP. Randomly reselected 055 2/2 055 A3.03 K3.01 as there are limited K/As of 2.5 or greater Importance Factor in System 055 - Condenser Air Removal.

Q #29 - This specific K/A does not apply as there is no Fuel Handling 2/2 072 K3.02 operation that is impacted by the Area Radiation Monitoring System at CPNPP. Randomly reselected 072 K5.02 for skyscraper balance.

Q #14 - Unable to develop a psychometrically sound question that 2/1 039 A1.03 discriminates at the RO level. Randomly reselected 039 A1.06.

Q #52 - Coverage of the Station Service Water System deemed adequate per 1/1 062 AA2.02 Questions #24 and #25. Randomly reselected 026 AA2.03.

Q #59 - This specific K/A does not apply as there are no Reactor Coolant 1/2 037 AA1.09 System Loop Isolation Valves at CPNPP. Randomly reselected 037 AA1.13.

Q #42 - Unable to develop a psychometrically sound question that 1/1 058 G 2.2.25 discriminates at the RO level. Randomly reselected G 2.4.50.

Q #66 - Coverage of this K/A deemed adequate per NRC JPM RA3.

3/1 G 2.1.14 Randomly reselected G 2.1.39.

Q #77 - Coverage of this K/A topic already addressed by Qs #6, #52, and #81.

1/1 011 EA2.03 Reselected 011 EA2.01.

Q #80 - Unable to develop a psychometrically sound question that 1/1 055 G 2.1.25 discriminates at the SRO level. Reselected 055 G 2.1.20.

Q #81 - Unable to develop a psychometrically sound question that 1/1 026 AA2.02 discriminates at the SRO level. Reselected 026 G 2.2.22.

W/E01 & E02 Q #82 - Unable to develop a psychometrically sound question that 1/2 G 2.4.1 discriminates at the SRO level. Reselected W/E01 & E02 G 2.4.18.

Q #85 - Unable to develop a psychometrically sound question that 1/2 032 G 2.4.1 discriminates at the SRO level. Reselected 033 G 2.2.22.

Q #86 - Unable to develop a psychometrically sound question that 2/1 012 A2.03 discriminates at the SRO level. Reselected 012 A2.05.

Page 14 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-401 Record of Rejected K/As Form ES-401-4 Q #89 - Unable to develop a psychometrically sound question that 2/1 062 A2.12 discriminates at the SRO level. Reselected 062 A2.10.

Q #95 - Coverage of this K/A topic already addressed by Q #66. Reselected 3/1 G 2.1.39 G 2.1.23.

Q #99 - Unable to develop a psychometrically sound question that 3/4 G 2.4.28 discriminates at the SRO level. Reselected G 2.4.41.

Q #67 - Unable to develop a psychometrically sound question that 3/1 G 2.1.15 discriminates at the RO level. Reselected G 2.1.19.

Page 15 of 15 CPNPP NRC 2010 ES-401-2 & 3 & 4 Written Outline Rev f.doc

ES-301 Administrative Topics Outline Form ES-301-1 Facility: CPNPP Units 1 & 2 Date of Examination: 03/29/10 Examination Level RO Operating Test Number: NRC Administrative Topic Type Code* Describe Activity to be Performed (see Note) 2.1.25 Ability to interpret reference materials, such as graphs, curves, tables, etc. (3.9)

Conduct of Operations M, R JPM: Perform a Manual Quadrant Power Tilt Ratio Calculation (RO1803A).

2.1.43 Ability to use procedures to determine the effects on reactivity of plant changes, such as reactor coolant system temperature, Conduct of Operations M, R secondary plant, fuel depletion, etc. (4.1)

JPM: Perform a Power Change Worksheet Calculation (RO1302).

2.2.6 Knowledge of the process for making changes to procedures. (3.0)

Equipment Control M, R JPM: Initiate a Procedure Change (RO5004).

2.3.13 Knowledge of radiological safety procedures pertaining to licensed operator duties, such as response to radiation monitor alarms, containment entry requirements, fuel handling Radiation Control D, S responsibilities, access to locked high-radiation areas, aligning filters, etc. (3.4)

JPM: Perform Actions for an Accident Involving Spent Fuel (RO4504).

Emergency Plan NOTE: All items (5 total) are required for SROs. RO applicants require only 4 items unless they are retaking only the administrative topics, when all 5 are required.

  • Type Codes & Criteria: (C)ontrol room, (S)imulator, or Class(R)oom (D)irect from bank ( 3 for ROs; for 4 for SROs & RO retakes)

(N)ew or (M)odified from bank ( 1)

(P)revious 2 exams ( 1; randomly selected)

Page 1 of 2 CPNPP NRC 2010 ES-301-1 RO Admin JPM Outline Rev c.doc

Administrative Topics Outline Task Summary RA1 The candidate will perform a manual Quadrant Power Tilt Ratio calculation per OPT-302, Calculating Power Tilt Ratio, and determine whether Acceptance Criteria are met. The critical steps include recording data, accurately performing calculations and applying Acceptance Criteria. This is a modified bank JPM.

RA2 The candidate will perform a Power Change Calculation Worksheet per IPO-003A, Power Operations, Attachment 3, Power Change Worksheet, for a Unit downpower. The critical steps include making reactivity determinations based on plant conditions. This is a modified bank JPM.

RA3 The candidate will initiate a Procedure Change Notice per STA-202, Procedure Change Notice for a mislabeled step in ABN-501, Station Service Water System Malfunction. The critical steps include proper identification of the required level of review, proper form completion and correctly performing the mark-up of the affected page. This is a modified bank JPM.

RA4 The candidate will implement radiological emergency actions per ABN-908, Fuel Handling Accident, for an accident involving spent fuel in the Fuel Handling Building. The critical steps include initiating local evacuation, Site notification, and ensuring proper ventilation alignment. This is a bank JPM.

Page 2 of 2 CPNPP NRC 2010 ES-301-1 RO Admin JPM Outline Rev c.doc

ES-301 Administrative Topics Outline Form ES-301-1 Facility: CPNPP Units 1 and 2 Date of Examination: 03/29/10 Examination Level SRO Operating Test Number: NRC Administrative Topic Type Code* Describe Activity to be Performed (see Note) 2.1.1 Knowledge of conduct of operations requirements. (4.2)

Conduct of Operations M, R JPM: Determine Technical Specification and Event Reportability (SO1005).

2.1.23 Ability to perform specific system and integrated plant procedures during all modes of plant operation. (4.4)

Conduct of Operations D, R JPM: Manually Perform Critical Safety Function Status Checks (SO1135).

2.2.14 Knowledge of the process for controlling equipment configuration or status. (4.3)

Equipment Control N, R JPM: Determine Fire Compensatory Measures for an Emergent Condition (New).

2.3.4 Knowledge of radiation exposure limits under normal or emergency conditions. (3.7)

Radiation Control M, R JPM: Select Personnel for Emergency Exposure (SO1142).

2.4.44 Knowledge of emergency plan protective action recommendations. (4.4)

Emergency Plan M, R JPM: Determine Protective Action Requirements (SO1136).

NOTE: All items (5 total) are required for SROs. RO applicants require only 4 items unless they are retaking only the administrative topics, when all 5 are required.

  • Type Codes & Criteria: (C)ontrol room, (S)imulator, or Class(R)oom (D)irect from bank ( 3 for ROs; for 4 for SROs & RO retakes)

(N)ew or (M)odified from bank ( 1)

(P)revious 2 exams ( 1; randomly selected)

Page 1 of 1 CPNPP NRC 2010 ES-301-1 SRO Admin JPM Outline Rev e.doc

Administrative Topics Outline Task Summary SA1 The applicant will identify impacted Technical Specification Limiting Conditions for Operations and determine Event Reportability per STA-501, Non-Routine Reporting and CPNPP Technical Specifications. The critical steps include identifying the Technical Specification and determining the oral and written Reporting Requirements. This is a modified bank JPM.

SA2 The applicant will manually determine Critical Safety Function Status during a LOCA scenario. The critical tasks include accurately determining the status for each Critical Safety Function. This is a bank JPM.

SA3 The applicant will evaluate a Fire Protection Impairment per STA-738, Fire Protection Systems/Equipment Impairments. The critical steps are to determine Fire Watch implementation and other Compensatory Measures.

This is a new JPM.

SA4 The applicant will be required to choose a volunteer for an Emergency Exposure per EPP-305, Emergency Exposure Guidelines and Personnel Dosimetry. The critical steps require the applicant to choose the appropriate volunteer for a lifesaving activity. This is a modified bank JPM.

SA5 The applicant will determine Protective Actions per EPP-304, Protective Action Recommendations. The critical steps include determining the proper Protective Actions, Pasquill Stability Class, and Zones to be evacuated or sheltered. This is a modified bank JPM.

Page 2 of 2 CPNPP NRC 2010 ES-301-1 SRO Admin JPM Outline Rev e.doc

ES-301 Control Room / In-Plant Systems Outline Form ES-301-2 Facility: CPNPP Units 1 and 2 Date of Examination: 03/29/10 Exam Level: RO SRO(I) SRO (U) Operating Test No.: NRC Control Room Systems@ (8 for RO; 7 for SRO-I; 2 or 3 for SRO-U, including 1 ESF)

System / JPM Title Type Code* Safety Function S-1 001 - Control Rod Drive System (RO1008) D, S 1 Perform Control Rod Exercises (RO ONLY)

S-2 006 - Emergency Core Cooling System (New) A, EN, L, N, 2 S

Align Cold Leg Injection During a Loss of Inventory S-3 010 - Pressurizer Pressure Control System (RO1209B) D, EN, L, S 3 Control Pressurizer Pressure During Cooldown S-4 003 - Reactor Coolant Pump System (RO1118) A, D, S 4-P Respond to Reactor Coolant Pump Seal Malfunction S-5 061 - Auxiliary / Emergency Feedwater System (RO3504) A, M, S 4-S Test the Turbine Driven Auxiliary Feedwater Pump S-6 022 - Containment Cooling System (New) A, N, S 5 Respond to Containment High Temperature Alarm S-7 062 - AC Electrical Distribution System (New) N, S 6 Transfer 480 VAC Bus from Normal to Alternate Source S-8 016 - Non-Nuclear Instrumentation System (RO1829) A, D, S 7 Respond to Steam Flow Instrument Failure In-Plant Systems@ (3 for RO; 3 for SRO-I; 3 or 2 for SRO-U)

P-1 064 - Emergency Diesel Generator System (AO6311A) D, E, R 6 Perform Local Restoration of EDG P-2 004 - Chemical & Volume Control System (AO5202) D, E, R 2 Restore Charging Flow with PD Charging Pump P-3 086 - Fire Protection System (New) E, N, R 8 Perform Actions for Fire In Containment Page 1 of 3 CPNPP NRC 2010 ES-301-2 RO & SRO JPM Outline Rev c.doc

ES-301 Control Room / In-Plant Systems Outline Form ES-301-2

@ All RO and SRO-I control room (and in-plant) systems must be different and serve different safety functions; all 5 SRO-U systems must serve different safety functions; in-plant systems and functions may overlap those tested in the control room.

  • Type Codes Criteria for RO / SRO-I / SRO-U (A)lternate path 4-6 / 4-6 / 2-3 (C)ontrol room (D)irect from bank 9/8/4 (E)mergency or abnormal in-plant 1/1/1 (EN)gineered safety feature - / - / 1 (control room system)

(L)ow Power / Shutdown 1/1/1 (N)ew or (M)odified from bank including 1(A) 2/2/1 (P)revious 2 exams 3 / 3 / 2 (randomly selected)

(R)CA 1/1/1 (S)imulator NRC JPM Examination Summary Description S-1 The candidate will perform Control Rod Exercises for Control Bank D rods per OPT-106A, Control Rods Exercise. This is a bank JPM under Control Rod Drive System - Reactivity Control Safety Function.

S-2 The candidate will initiate Hot Leg Injection per ABN-104, Residual Heat Removal System, Section 8.0, Complete Loss of Decay Heat Removal Capability - RCS Not Filled after a loss of inventory event while in MODE 5. The alternate path occurs when Safety Injection Pumps cannot be aligned and a flowpath is established to initiate Cold Leg Injection. This is a new, low power JPM under the Emergency Core Cooling System - Reactor Coolant System Inventory Control Safety Function.

S-3 The candidate will reduce Reactor Coolant System Pressure and Block Safety Injection per IPO-005A, Plant Cooldown from Hot Standby to Cold Shutdown, Section 5.1, Cooldown from MODE 3 to MODE 5, Step 5.1.5. This is a bank JPM under the Pressurizer Pressure Control System - Reactor Pressure Control Safety Function.

S-4 The candidate will recognize the indications and perform the actions for Reactor Coolant Pump Seal Abnormalities per ABN-101, Reactor Coolant Pump Trip /

Malfunction. The alternate path occurs when it is recognized that excessive leakoff requiring a Unit and Reactor Coolant Pump Trip exists. This is a bank JPM under the Reactor Coolant Pump System - Primary System Heat Removal from Reactor Core Safety Function.

Page 2 of 3 CPNPP NRC 2010 ES-301-2 RO & SRO JPM Outline Rev c.doc

ES-301 Control Room / In-Plant Systems Outline Form ES-301-2 S-5 The candidate will perform Post-Maintenance Testing of the Turbine Driven Auxiliary Feedwater Pump with flow to the Steam Generators per SOP-304A, Auxiliary Feedwater System. The alternate path occurs when a high bearing temperature requires a trip of the pump. This is a modified bank JPM under Auxiliary / Emergency Feedwater System - Secondary System Heat Removal from Reactor Core Safety Function. This is a PRA significant action.

S-6 The candidate will recognize the indications and perform the actions for a high Containment temperature condition per ALM-0031A, 1-ALB-3A, Window 1.1, CTMNT TEMP HI. The alternate path occurs when less than three Containment Fan Coolers are available and the non-operating Control Rod Drive Mechanism Cooling Fan is aligned to cool Containment. This is a new JPM under the Containment Cooling System - Containment Integrity Safety Function.

S-7 The candidate will align 480 VAC Bus 1EB1 to the Alternate Power Source per SOP-604A, 480 VAC Switchgear and MCCs, Step 5.3.2, 480 V Safeguards Bus Transfer from the Normal to the Alternate Power Source. This is a new JPM under the AC Electrical Distribution System - Electrical Safety Function.

S-8 The candidate will respond to a Steam Flow Instrument failure per ALM-0081A, 1-ALB-8A, Window 1.8, SG 1 STM FLO & FW FLO MISMATCH and ABN-707, Steam Flow Instrument Malfunction. The alternate path occurs when Steam Generator level is not being adequately controlled and the operator must take manual control. This is a bank JPM under the Non-Nuclear Instrumentation System - Instrumentation Safety Function.

P-1 The candidate will perform local restoration of the Emergency Diesel Generator per ABN-601, Response to a 138/345 KV System Malfunction, Attachment 1, Restoration of a Diesel Generator following a Station Blackout. This is a bank JPM under the Emergency Diesel Generators System - Electrical Safety Function.

P-2 The candidate will perform the actions to restart the Positive Displacement Charging Pump and restore Charging flow per ABN-301, Instrument Air System Malfunction and SOP-103A, Chemical and Volume Control. This is a bank JPM under the Chemical and Volume Control System - Reactor Coolant System Inventory Control Safety Function.

P-3 The candidate will perform actions during a fire in Containment per ABN-807A/B, Response to a Fire in the Containment Building, Attachment 1, Actions to be Taken by the Nuclear Equipment Operator. This is a new, time critical JPM under the Fire Protection System - Plant Service Systems Safety Function.

Page 3 of 3 CPNPP NRC 2010 ES-301-2 RO & SRO JPM Outline Rev c.doc

ES-301 Transient and Event Checklist Form ES-301-5 Facility: CPNPP 1 and 2 Date of Exam: 03/29/10 Operating Test No.: NRC A E SCENARIOS P V P E CPNPP #1 CPNPP #2 L N T MINIMUM(*)

I T CREW CREW CREW CREW O C

POSITION POSITION POSITION POSITION T A T A

N Y S A B S A B S A B S A B R T O R T O R T O R T O L R I U T P E O C P O C P O C P O C P RX - - - - - 1 1 0 NOR 2 1 - 1,2 - 1 1 1 SROU I/C 1,2,3, 2,3,4 1,2,3, 3,4,5,

- 4 4 2 4,5 4 7 MAJ 6,8 5 5 8 - 2 2 1 TS 1,3 2,3 2,4 3,4 - 0 2 2 RX - - - 1 - - - 2 - 1 1 0 NOR 2 - 1 - - - 1,2 - - 1 1 1 SROI I/C 1,2,3, 1,3,4, 2,3,4 4,6 1,2,3, 2,4,7 3,4,5, 7,9,

- 4 4 2 4,5 9 4 7 10 MAJ 6,8 6,8 5 5 5 5 8 8 - 2 2 1 TS 1,3 - 2,3 - 2,4 - 3,4 - - 0 2 2 RX - - 1 - - - 2 - - 1 1 0 NOR - 2 - 1 - - - 1,2 - 1 1 1 RO I/C 1,3,4, 5,7 4,6 2,3,7 2,4,7 1,3,8 7,9, 3,5

- 4 4 2 9 10 MAJ 6,8 6,8 5 5 5 5 8 8 - 2 2 1 TS - - - - - - - - - 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions; Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.

NUREG 1021 Revision 9.1 Page 1 of 1 CPNPP NRC 2010 ES-301-5 Rev a

Appendix D Scenario Outline Form ES-D-1 Facility: CPNPP 1 & 2 Scenario No.: 1 Op Test No.: March 2010 NRC Examiners: Operators:

Initial Conditions:

  • 100% power MOL - RCS Boron is 910 ppm by Chemistry sample.

Turnover: Maintain steady-state 100% power conditions.

Critical Tasks:

  • Manually Trip the Main Turbine when Automatic Reactor Protection Trip Fails.

Event No. Malf. No. Event Type* Event Description 1 RX17A C (RO, SRO) Power Operated Relief Valve (PCV-455A) seat leakage.

+10 min TS (SRO) 2 TC08A N (BOP, SRO) High Pressure Turbine Stop Valve #4 fails closed.

+20 min Manual Turbine Runback required.

3 RX05A I (RO, SRO) Pressurizer Level Transmitter (LT-459A) fails high.

+30 min TS (SRO) 4 TU04 C (RO, SRO) Main Turbine vibration @ 15 mils on a 300 second ramp requiring

+35 min manual Reactor trip.

5 TC07A C (BOP, SRO) Main Turbine fails to trip on Reactor trip requiring manual Turbine

+35 min trip.

6 ED01 M (RO, BOP, SRO) Loss of Offsite Power 30 seconds after Reactor trip.

+36 min 7 EG06B C (BOP) Emergency Diesel Generator (1-02) start failure.

+36 min 8 FW09A M (RO, BOP, SRO) Turbine Driven Auxiliary Feedwater Pump trips on overspeed 300

+40 min seconds after Reactor trip. Total Loss of Feedwater.

9 DIRCV C (RO) Power Operated Relief Valve (PCV-455A) Block Valve (1/1-8000A)

+50 min 8000A fails closed.

  • (N)ormal, (R)eactivity, (I)nstrument, (C)omponent, (M)ajor, (TS)Technical Specifications CPNPP NRC 2010 ES-D-1 Scenario Outline Rev a.doc

Appendix D Scenario Outline Form ES-D-1 SCENARIO

SUMMARY

NRC #1 The crew will assume the watch and maintain steady-state conditions per IPO-003A, Power Operations. Auxiliary Feedwater Pump 1-01 is out-of-service for coupling repair.

The first event is a leaking Power Operated Relief Valve (PORV). The crew responds per Alarm Procedure ALM-0052A, Window 3.1, Pressurizer PORV Outlet Temperature High. Actions include cycling the PORV after its associated PORV Block Valve is closed. The PORV Block Valve will later fail to open complicating the scenario. The SRO will refer to Technical Specifications.

When ALM-0052A actions are complete, a High Pressure Turbine Stop Valve fails closed. Electrical output of the Generator will drop from approximately 1265 MWe to 950 MWe and require an immediate Turbine Runback to 900 MWe. Actions are performed per ABN-401, Main Turbine Malfunction, Section 9.0, Inadvertent Closure of an HP or LP Stop or Control Valve. When the Turbine Runback is initiated, the crew will monitor for proper Rod Control and Steam Dump System response.

When plant conditions are stable, a Pressurizer level instrument will fail high. The crew will respond per ABN-706, Pressurizer Level Instrumentation Malfunction. The RO will take manual control of Pressurizer level or Charging flow to maintain Pressurizer level on program. Once the faulty instrument is identified and an alternate controlling channel is selected, Charging flow and Pressurizer level control will be returned to AUTO. The SRO will refer to Technical Specifications.

The next event is an increasing vibration on the Main Turbine caused by the High Pressure Stop Valve closure. The Unit Supervisor will enter ABN-401, Main Turbine Malfunction, Section 2.0, Turbine Shaft or Frame Vibration High and the crew will monitor the condition of the Main Turbine and Generator and vibration will continue to increase requiring a manual Reactor and Turbine trip. When the Reactor is tripped, the Turbine will fail to trip and require a manual actuation.

At this point, the crew will enter EOP-0.0A, Reactor Trip or Safety Injection and transition to EOS-0.1A, Reactor Trip Response at Step 4. The scenario is complicated by a Loss of Offsite Power and the failure of the Train B Emergency Diesel Generator to start. While in EOS-0.1A, the crew will determine that a Total Loss of Feedwater has occurred when the Turbine Driven Auxiliary Feedwater Pump trips and a transition to FRH-0.1A, Response to Loss of Secondary Heat Sink is required. An immediate transition in FRH-0.1A to Step 12 will be identified and the RO must perform alternate actions when only one PORV will open.

The scenario is terminated when adequate Reactor Coolant System Bleed and Feed is verified.

Risk Significance:

Appendix D Scenario Outline Form ES-D-1 Facility: CPNPP 1 & 2 Scenario No.: 2 Op Test No.: March 2010 NRC Examiners: Operators:

Initial Conditions: * ~1X10-8 amps BOL - RCS Boron is 1545 ppm by Chemistry sample.

  • Steam Dump System in service for RCS Temperature Control.

Turnover: Raise Power to 2% in preparation for plant startup to 100% power.

Critical Tasks:

  • Manually Initiate Safety Injection Upon Failure to Automatically Actuate.
  • Manually Initiate Containment Isolation Phase A Upon Failure to Automatically Actuate.

Event No. Malf. No. Event Type* Event Description 1 R (RO) Raise power to 2%.

+20 min N (BOP, SRO) 2 Override C (BOP, SRO) Safety Injection Accumulator (1-01) nitrogen leak.

+30 min TS (SRO) 3 FW24B I (BOP, SRO) Motor Driven Auxiliary Feedwater Pump (1-02) trip.

+40 min TS (SRO) 4 ED05H C (RO, BOP, SRO) Loss of 6.9 KV Safeguards Bus 1EA1.

+60 min TS (SRO) 5 MS03A M (RO, BOP, SRO) Steam Generator (1-01) Steam Line Break outside Containment.

+65 min 6 RP07A I (RO) Safety Injection Train A and Train B fail to automatically actuate.

+65 min RP07B 7 RP09A C (BOP) Containment Isolation Phase A Train A and Train B fail to

+65 min RP09B automatically actuate.

  • (N)ormal, (R)eactivity, (I)nstrument, (C)omponent, (M)ajor, (TS)Technical Specifications CPNPP NRC 2010 ES-D-1 Scenario Outline Rev a.doc

Scenario Event Description NRC Scenario #2 SCENARIO

SUMMARY

NRC #2 The crew will assume the watch with a Plant Startup in progress and will continue raising power to approximately 2% per IPO-002A, Plant Startup from Hot Standby.

When conditions are stable, a Safety Injection Accumulator nitrogen leak will occur. Actions are performed per the Alarm Response Procedure and SOP-201A, Safety Injection Accumulators. The SRO will refer to Technical Specifications.

When conditions are stable, Motor Driven Auxiliary Feedwater Pump 1-02 will trip. The crew will refer to ABN-305, Auxiliary Feedwater System Malfunction, Section 3.0 and determine that Steam Generator levels are slowly decreasing and start the Turbine Driven Auxiliary Feedwater Pump. The SRO will refer to Technical Specifications.

The next event is a loss of 6.9 KV Safeguards Bus 1EA1. The crew will respond per ABN-602, Response to a 6900/480V System Malfunction. Actions include starting a Centrifugal Charging Pump and stopping the Emergency Diesel Generator without Station Service Water flow. With the loss of the 2nd Motor Driven Auxiliary Feedwater Pump, the BOP will align feedwater flow to Steam Generators 1-01 and 1-02. Additionally, the crew will perform actions per ABN-602 to ensure necessary plant equipment is operating and affected equipment is placed in PULL OUT. The SRO will refer to Technical Specifications.

When ABN-602 actions are complete, a Steam Line Break outside Containment will occur on Steam Generator 1-01. The crew will enter EOP-0.0A, Reactor Trip or Safety Injection and then transition to EOP-2.0A, Faulted Steam Generator Isolation at Step 12. While performing the actions of EOP-0.0A, the RO will be required to manually initiate both Trains of Safety Injection and the BOP will be required to manually initiate both Trains of Containment Isolation Phase A.

Once the faulted Steam Generator is isolated, the Unit Supervisor will transition to EOS-1.1A, Safety Injection Termination.

The scenario is terminated after EOS-1.1A, Safety Injection Termination is entered and the actions to secure Safety Injection flow and establish Letdown flow are performed.

Risk Significance:

  • Failure of risk important system prior to trip: Loss of MDAFW Pump 1-01 Loss of a 6.9 KV Safeguards Bus
  • Risk significant core damage sequence: Steam Line Break Outside Containment

Appendix D Scenario Outline Form ES-D-1 Facility: CPNPP 1 & 2 Scenario No.: 3 Op Test No.: March 2010 NRC Examiners: Operators:

Initial Conditions:

  • 72% power MOL - RCS Boron is 916 ppm by Chemistry sample.

Turnover: Maintaining 72% power per Load Controller direction. Rod Control in AUTO.

Critical Tasks:

  • Emergency Borate due to Loss of Digital Rod Position Indication.

Event No. Malf. No. Event Type* Event Description 1 FW16 C (BOP, SRO) Lowering Condenser vacuum requiring power reduction.

+15 min 2 RP05A I (RO, SRO) Reactor Coolant System Loop (1-01) Narrow Range Cold Leg

+25 min TS (SRO) Temperature Instrument (TI-411B) fails low.

3 RX01G I (BOP, SRO) Steam Generator (1-04) Feed Flow Instrument (FT-540) fails high.

+30 min 4 CV01B C (RO, SRO) Centrifugal Charging Pump (1-01) trip.

+40 min TS (SRO) 5 SG01D M (RO, BOP, SRO) Steam Generator (1-04) Tube Rupture ramping to 650 gpm over 5

+45 min minutes.

6 MS07D Steam Generator (1-04) Main Steam Isolation Valve (HV-2336A)

+45 min fails closed upon initial Radiation Monitor alarm.

7 RD12C I (RO) Digital Rod Position Indication power failure upon manual or auto

+45 min Reactor trip actuation. Emergency boration required.

8 Override C (BOP) Steam Generator (1-04) Turbine Driven Auxiliary Feedwater Pump

+55 min Steam Supply Valve (HV-2452-1) fails to close.

  • (N)ormal, (R)eactivity, (I)nstrument, (C)omponent, (M)ajor, (TS)Technical Specifications CPNPP NRC 2010 ES-D-1 Scenario Outline Rev a.doc

Appendix D Scenario Outline Form ES-D-1 SCENARIO

SUMMARY

NRC #3 The crew will assume the watch at 72% power with no scheduled activities per IPO-003A, Power Operations. The Grid Controller has requested that power remain at this level due to transmission line overload until further notice. Auxiliary Feedwater Pump 1-01 is out-of-service for coupling repair.

The first event is a loss of Condenser vacuum due to a drained loop seal. The crew will respond per ABN-304, Main Condenser and Circulating Water System Malfunction, Section 3.0. Actions include lowering of Main Turbine load until Condenser vacuum is maintained above 24.5 of vacuum.

The next event it is a low failure of TCOLD transmitter, TI-411B. Operator actions are per ABN-704, TCOLD / N-16 Instrumentation Malfunction, Section 2.0 and require stopping the withdrawal of Control Rods and restoring Reactor Coolant System temperature and Pressurizer level to normal. The SRO will refer to Technical Specifications.

When conditions are stable, a Steam Generator Flow Transmitter fails high. Operator response is per ABN-708, Feedwater Flow Instrument Malfunction, Section 2.0. The operator must take manual control of the affected Feed Control Valve to prevent a Unit trip on low Steam Generator water level. After manual control is established, an Alternate Channel is selected and Automatic control restored.

When the Steam Generator level control has been returned to Automatic, a loss of the running Centrifugal Charging Pump will occur. The crew will enter ABN-105, Chemical and Volume Control System Malfunction and perform actions to immediately restored Charging flow. The SRO will refer to Technical Specifications.

When Technical Specifications have been addressed, a Steam Generator Tube Rupture will ramp in over five minutes on Steam Generator 1-04. With increasing Main Steam Line radiation levels and lowering Pressurizer pressure, the Unit Supervisor will direct a Reactor and Turbine Trip.

The crew enters EOP-0.0A, Reactor Trip or Safety Injection and performs actions through Step 13 and then transitions to EOP-3.0A, Steam Generator Tube Rupture. Once it has been determined that Steam Generator 1-04 is the source of the tube rupture, the Main Steam Isolation Valve for that Steam Generator will fail closed. Isolation of Steam Generator 1-04 is complicated when its associated Main Steam Supply Valve to the Turbine Driven Auxiliary Feedwater (TDAFW) Pump will not close. The Response Not Obtained actions include tripping the TDAFW Pump. Additionally a Loss of Digital Rod Position Indication System will require an Emergency Boration.

This scenario is terminated when the ruptured Steam Generator is isolated and the crew is commencing a cooldown and depressurization of the Reactor Coolant System.

Risk Significance:

  • Failure of risk important system prior to trip: Centrifugal Charging Pump 1-01

Appendix D Scenario Outline Form ES-D-1 Facility: CPNPP 1 & 2 Scenario No.: 4 Op Test No.: March 2010 NRC Examiners: Operators:

Initial Conditions: * ~3% power BOL - RCS Boron is 1545 ppm by Chemistry sample.

  • Steam Dump System in service for RCS Temperature Control.

Turnover: Transfer from Auxiliary Feedwater System to Main Feedwater System.

Critical Tasks:

Event No. Malf. No. Event Type* Event Description 1 N (BOP, SRO) Transfer from Auxiliary Feedwater System to Main Feedwater

+15 min System and place Feedwater Bypass Control Valves in AUTO.

2 R (RO, BOP) Raise power to 8% in preparation for synchronizing the Main

+30 min N (SRO) Generator to the electrical grid.

3 RX04C I (BOP, SRO) Steam Generator (1-03) Level Transmitter (LT-553) fails low.

+40 min TS (SRO) 4 NI03A TS (SRO) Power Range Nuclear Instrument (N-41) detector fails high.

+50 min 5 TP02A C (BOP, SRO) Turbine Plant Cooling Water Pump (1-01) sheared shaft.

+55 min 6 AN2A_02.1 ALB-02A-2.1, Seismic Monitoring System Activation.

+60 min AN2A_03.1 ALB-02A-3.1, Operating Basis Earthquake Exceedance.

7 CV02 C (RO, SRO) Charging Line leak inside Containment.

+70 min 8 RC08B1 M (RO, BOP, SRO) Small Break Loss of Coolant Accident inside Containment.

+70 min 9 RP01 I (RO) Automatic Reactor Trip failure.

+70 min 10 Override C (RO) Reactor Coolant Pump (1-02) fails to manually trip.

+70 min Manually open feeder breaker to 6.9 kV Bus 1A2.

  • (N)ormal, (R)eactivity, (I)nstrument, (C)omponent, (M)ajor, (TS)Technical Specifications CPNPP NRC 2010 ES-D-1 Scenario Outline Rev a.doc

Appendix D Scenario Outline Form ES-D-1 SCENARIO

SUMMARY

NRC #4 The crew will assume the watch with power at approximately 3% per IPO-002A, Plant Startup from Hot Standby. The crew will transfer Feedwater flow from the Auxiliary Feedwater System to the Main Feedwater System in preparation for raising power to 8%. This is followed by entry into SOP-304A, Auxiliary Feedwater System, Section 5.2, Shutdown and Standby of the Auxiliary Feedwater System.

When transfer of Feedwater has been completed, the crew will enter IPO-003A, Power Operations, Section 5.1, Warmup and Synchronization of the Turbine Generator and perform a power ascension using the Rod Control and Steam Dump Systems.

When power has been raised 3% to 5%, a Steam Generator Level Transmitter will fail low. Actions are per ABN-710, Steam Generator Level Instrumentation Malfunction. The BOP will be required to take manual control of the Feedwater Bypass Control Valve and then select an alternate controlling channel to return the Feedwater System to automatic control. The SRO will refer to Technical Specifications.

When Technical Specifications are addressed, a Power Range Nuclear Instrument will fail high. The crew will enter ABN-703, Power Range Instrument Malfunction. The crew will perform actions to defeat inputs from the failed channel. The SRO will refer to Technical Specifications.

The next event is a sheared shaft of the running Turbine Plant Cooling Water (TPCW) Pump. The crew will enter ABN-306, Turbine Plant Cooling Water System Malfunction and recognize that the TPCW Pump is running without discharge flow or pressure indications and start the standby TPCW Pump.

When TPCW flow is restored, a seismic event will occur. The crew will enter ABN-907, Acts of Nature, Section 2.0, Earthquake and perform actions as required by the ABN. This is the initiating event for the Charging Line Leak inside Containment. The crew will enter ABN-103, Excessive Reactor Coolant Leakage and perform actions in an attempt to locate the source of the leakage. While performing actions in ABN-103 the crew will isolate Letdown and Charging and determine that the source of leakage is in the Charging Line. When actions to place Excess Letdown in service are reached a Small Break Loss of Coolant Accident will occur.

With the automatic Reactor Trip function disabled, the crew will determine that a manual Reactor Trip must be performed with entry into EOP-0.0A, Reactor Trip or Safety Injection. While performing EOP-0.0A actions the Reactor Coolant Pumps (RCP) must be stopped due to a loss of subcooling.

RCP 1-02 will not trip from its normal location and require deenergizing of the associated 6900 V Bus or local trip of the breaker by an operator in the field. At Step 14, a transition to EOP-1.0A, Loss of a Reactor or Secondary Coolant will occur.

The scenario is terminated when an evaluation of plant status is performed to verify Cold Leg Recirculation capability.

Risk Significance:

  • Risk important components out of service: None
  • Risk significant core damage sequence: Small Break Loss of Coolant Accident
Retrieved from "https://kanterella.com/w/index.php?title=ML101241010&oldid=2133688"