Text

Inservice Inspection Summary Report
	ML050390357
Person / Time
Site:	Cook
Issue date:	01/31/2005
From:	Fadel D; American Electric Power Co
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	AEP:NRC:5055, FOIA/PA-2010-0209
	Download: ML050390357 (150)
	v • d • e

American Electric Power Cook Nuclear Plant One Cook Place Bridgman, MI 49106 Wwwaep.com AMERICAM ELECrRIC POWER AEP:NRC:5055 10 CFR 50.55a January 31, 2005 Docket No.:

50-316 U. S. Nuclear Regulatory Commission ATTIN: Document Control Desk Mail Stop O-PI-17 Washington, DC 20555-0001 Donald C. Cook Nuclear Plant Unit 2 INSERVICE INSPECTION

SUMMARY

REPORT The attachment to this letter provides a copy of the inservice inspection summary report for activities at Donald C. Cook Nuclear Plant Unit 2, State of Michigan, National Board Number I (Mich. M-324232-M), located in Bridgman, Michigan. The plant is owned by Indiana Michigan Power Company, P.O. Box 60, Fort Wayne, IN, 46801.

The unit's commercial service date is July 1, 1978, and the Authorized Code Inspector is Mr. A. S. Jimenez, who is employed by ABS Group, Inc. of Houston, Texas.

The examinations, tests, replacements, repairs performed, conditions observed, and corrective measures taken are summarized in the attached report. Inservice inspection activities were performed in accordance with the rules and requirements of the American Society of Mechanical Engineers' Code,Section XI, 1989, and 1992 Editions with the 1992 Addenda, as applicable.

There are no new commitments in this letter.

please contact Mr. John A. Zwolinski, (269) 466-2428.

Should you have any questions, Safety Assurance Director, at Sincerely Daniel P. Fadel Engineering Vice President

Attachment:

Inservice Inspection Summary Report for the Donald C. ~Cook Nuclear Plant, Unit 2, 2004, Unit 2 Cycle 15 Refueling Outage.

I RV/rdw

U. S. Nuclear Regulatory Commission AEP:NRC:5055 Page 2 C:

R. Aben, DLEG/BCCFS/BD J. L. Caldwell, NRC Region m K. D. Curry, Ft. Wayne AEP, w/o attachment J. T. King, MPSC, w/o attachment C. F. Lyon, NRC Washington, DC MDEQ - WHMDJHWRPS, w/o attachment NRC Resident Inspector

Attachment to AEP:NRC:5055 Inservice Inspection Summary Report for the Donald C. Cook Nuclear Plant, Unit 2 2004, Unit 2 Cycle 15 Refueling Outage.

INSERVICE INSPECTION

SUMMARY

REPORT FOR THE DONALD C. COOK NUCLEAR PLANT UNIT 2 2004, Unit 2 Cycle 15 REFUELING OUTAGE INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2, BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 Report for Inspection Period From June 20, 2003 to November 09, 2004 Prepared by:

far E-. Hall' Reviewed by:

CE r

Pran ms Engineering Programs Supervisor

_ Date:

I l I j.2 OOZE

.Date: 1 /7l4<

j1-

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 Report of Inservice Inspections From June 20, 2003 to November 09, 2004 TABLE OF CONTENTS PagesSection I Introduction 3

Section 2 NIS-1 Inservice Inspection 4-6 Summary Report Section 3 Abstract of Examinations, Results, 7-21 And Corrective Actions for Class I And Class 2 Components Section 4 System Pressure Tests 22 Section 5 Snubber Tests 23-25 Section 6 ASME Section XI, Article IWE and IWL 26-29 Section 7 ASME Section XI, Steam Generator 30-32 Eddy Current Examinations Section 8 NIS-2 Repair and Replacement 33-35 Reports Index Section 9 NIS-2 Repair and Replacement 36-146 Reports

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2, BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 1 INTRODUCTION This report summarizes the Inservice Inspection activities performed at the Donald C.

Cook Nuclear Plant, Unit 2, for the period of June 20, 2003 to November 09, 2004. This report addresses examinations and activities associated with the Unit 2 Cycle 15, 2004 Refueling Outage. This is the first refueling outage of the Second Inspection Period of the Third Ten-Year Interval.

These activities were performed in accordance with the requirements of the ASME Boiler and Pressure Vessel Code,Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components. As of July 1, 1996, the third ten-year inspection interval began and the applicable code of record for ISI activities became ASME Section XI, 1989 Edition (no Addenda) and 1992 Edition with 92 Addenda as applicable.

The purpose of this report is to satisfy the requirements of IWA-6000 for the submittal of an Inservice Inspection Summary Report at the completion of each refueling outage.

Examination and tests conducted since the preceding summary report are included in this report. Repairs and replacements are also included in this report per the requirements of the 1989 Edition of ASME Section XI, IWA-6220.

Contents of this report have been reviewed and verified correct with supporting documentation available at the plant for review if required.

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 2 NIS-1 INSERVICE INSPECTION

SUMMARY

REPORT

£1

FORM NIS-1 OWNERS' DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner:

2. Plant:

Indiana Michigan Power Co.. PO Box 60, Ft. Wayne, IN 46801 (Name and Address of Owners)

Donald C. Cook Nuclear Plant. One Cook Place, Bridgman, MI 49106 (Name and Address of Plant)

3. Plant Unit: Two

4. Owner Certification of Authorization (if required):

N/A

5. Commercial Service Date: 07/01/78

6. National Board Number for Unit: 1 (Mich. M-324232-M)

7. Components Inspected Component or Manufacturer or Manufacturer or State or Province National Board Appurtenance Installer Installer Serial Number Number Number Reactor Pressure Chicago Bridge T-1 M-324232-M I

Vessel and Iron Steam Generator, Westinghouse/MK 1342-Upper M-324-235-M 68 Upper 2-OME-3-2

-Ferguson Assembly 40 -Lower 3370G - Lower Assembly Steam Generator, Westinghouse/MK 1343 - Upper M-324-236-M 68 Upper 2-OME-3-3

-Ferguson Assembly 39 - Lower 3369G - Lower Assembly Steam Generator, Westingbouse/MK 1344 - Upper M-324-237-M 68 Upper 2-OME-34

-Ferguson Assembly 38 - Lower 3368G - Lower Assembly Pressurizer Westinghouse 1231 M-324233-M 6894 2-OME-4 East CTS HT.

Yuba 69-G-226IB Exchanger 2-HE-18E West RHR HT.

Engineers and S-15586-B Exchanger Fabricators, INC 2-HE-17W Containment Graver Piping Systems -

Power Systems RC, RH, SI, CTS, Inc. and TUBECO CCW, CS, ESW, FW, MS Pipe Supports Grinnell

8. Examination Dates: June 20, 2003 to November 09. 2004

9. Inspection Period Identification: Second

10. Inspection Interval Identification: Third

11. Applicable Edition of Section XI 1989 no Addenda & 1992 with 92Addenda

12. Date/Revision of Inspection Plan: 8/03 Rev. 1

13. Abstract of Examinations. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan.

See Sections 3, 4, 5, 6, and 7

14. Abstract of Results of Examinations and Tests.

See Sections 3, 4, 5, 6 and 7

15. Abstract of Corrective Measures.

See Sections 3, 4, 5, 6, and 7 We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable)

N/A Expiration Date N/A Date &AD 1-

. 206 5Signed Indiana Michigan Power Co. By Q,

Owner CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors an4 the State or Province of A/0A/IG2',J and employed by,489 G',WclP iie.

of 11mi)aKz 7.-

have insp cted the components described in this Owner's Report during the period to xtJ. 9 4 t

, and state that to the best of my knowledge and belief, the Owner hasdperf6rmed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermor either the Inspector nor his employer shall be liable in any manner for any personal injury or prope mage or a loss of any kind arising from or connected with this inspection.

/

Commissions eai66rf Al/c Il eJ vgJz Inspecor'~ig-nature National Board, State, Province, and Endorsements Date

/

20AC

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 3 ABSTRACT OF EXAMINATIONS, RESULTS, AND CORRECTIVE ACTIONS FOR CLASS 1 AND CLASS 2 COMPONENTS Inservice examinations were performed during the period June 20, 2003 to November 09, 2004. This report addresses examinations and activities associated with the Third 10-Year Interval-Second Inspection Period-First Refueling Outage (U-2 Cycle 15). All examinations were in accordance with the 1989 Edition (no Addenda) and 1992 Edition with 92 Addenda as applicable.

Examinations were scheduled and performed according to the Third Ten-Year Long Term Inservice Examination Plan for Class 1, 2, and 3 Systems and Components for Donald C. Cook Nuclear Plant, Unit 2. This is the currently approved ISI examination plan that identifies specific activities to be performed on a refueling outage basis.

Fifty-one (51) ASME Class 1 and eleven (11) ASME Class 2 components were examined. A combination of Ultrasonic, Magnetic Particle, Liquid Penetrant and Visual examination methods were used. One support failed the VT-3 examination. Support 2-GFW-825 had evidence of significant corrosion due to ground water intrusion. It was evaluated by the Design Engineering and found acceptable. The supports upstream, downstream and in the immediate vicinity were examined and found acceptable.

In accordance with CNP response to NRC Bulletin 2004-01, "INSPECTION OF ALLOY 82/182/600 MATERIALS USED IN THE FABRICATION OF PRESSURIZER PENETRATIONS AND STEAM SPACE PIPING CONNECTIONS AT PRESSURIZED - WATER REACTORS", all alloy 82/182 weld locations on the pressurizer received a bare metal visual examination and a best effort ASME Section XI Appendix VIII ultrasonic examination (commonly called PDI) and a surface examination.

No evidence of degradation was observed.

Examinations were performed and documented in response to NRC First Revised Order EA-03-009, "ISSUANCE OF ORDER ESTABLISHING INTERIM INSPECTION REQUIREMENTS FOR REACTOR PRESSURE VESSEL HEADS AT PRESSURIZED WATER REACTORS". All 78 Reactor Pressure Vessel Upper Head Penetrations and the Head vent (including the J-Groove welds) were examined using a combination of ultrasonic, surface, eddy current and visual techniques. There was no evidence of Leak Paths in the shrink-fit areas of the penetrations. Evidence of Craze Cracking was observed at Vessel Head Penetrations 13, 15, 21, 43, 59, 64, 68, 74 and 75 on the ID surface of the Penetration tube base material. Craze Cracking indications in these Vessel Head Penetrations were evaluated using WCAP 14118-P Revision 7, "STRUCTURAL INTEGRITY EVALUATION OF REACTOR VESSEL UPPER HEAD PENETRATIONS TO SUPPORT CONTINUED OPERATION: D.C. COOK V

UNITS 1 and 2", and did not require removal or repair. Code rejectable rounded indications were observed on the J-groove welds of Penetrations 74 and 75. The rounded indications are not believed to be associated with Primary Water Stress Corrosion Cracking, but rather the initial construction of the vessel head. The rounded indications on Penetration 74 and 75 were repaired via a weld overlay process approved via an NRC relief request.

Inspections of the reactor vessel top head included a bare metal visual examination by qualified VT-2 personnel. No signs of boric acid were noted. The bottom head also received a bare metal visual examination by qualified VT-2 personnel. No signs of boric acid were noted.

System pressure tests did not reveal any degradation of the system pressure boundary or the installed bolting.

The following Code Cases were utilized during this reporting period:

N-416-1 N-509 N-533 N-616 N-627 N-491-1 Nondestructive examinations were performed by WesDyne, Framatome and Indiana Michigan Power (I&M) personnel in accordance with procedures approved for use at the Cook Nuclear Plant.

I Attachment I Inservice Inspection Report Interval 3 1 Period 2 / Outage 1 (U2-C15)

CLASS: 1 CATEGORY: B-D ITEM: B3.110 Summary No.

006950 Component ID 6-2-RC-26 Component Description UPPER HEAD TO RELIEF NOZZLE System

System Description

PRZ PRESSURIZER Method Report No.

UT VE-04-001 Examination Procedure 54-ISI-130 Examination Remarks Total UT coverage was 75%.

See Framatome report U2C15-UT-028.

54-ISI-270 SEE FRAMATOME REPORT U2C15-MT-02.

MT VE-04-004 Summar No.

Component ID Component Description System

System Description

006960 6"-2-RC-27 UPPER HEAD TO RELIEF NOZZLE PRZ PRESSURIZER Method Renort No.

Examination Procedure Examination Remarks UT VE-041002 54-ISI-130 Total UT coverage was 75%.

See Framatome report U2C15-UT-030.

MT VE-04-005 54-lSI 270 SEE FRAMATOME REPORT U2C15-MT-03.

ITEM: B3.120 Summar No.

Component ID Component Description System

System Description

007300 6'-2-RC-26-IRS UPPER HEAD TO RELIEF NOZZLE PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks UT VE-04-003 54-ISI-132 See Framatome Report U2C15-UT-029.

Summarv No.

Component ID Component Description System

System Description

007400 6!-2-RC-27-IRS UPPER HEAD TO RELIEF NOZZLE PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks UT VE-04-041 54-ISI-132 SEE FRAMATOME REPORT U2C15-UT-031.

ITEM: B3.140 Summary No.

Comoonent ID Component Description System

System Description

009600 STM-22-1-IRS INLET NOZZLE INSIDE RADIUSSECTION 22 STEAM GENERATOR NO. 22 Method Report No.

Examination Procedure Examination Remarks UT VE-04-039 54-ISI-132 SEE FRAMATOME REPORT U2C25-UT-006.

Summarv No.

Component ID Component Description.

System

System Description

009700 STM-22-O-IRS OUTLET NOZZLE INSIDE RADIUS 22 STEAM GENERATOR NO. 22 SECTION Method Reiort No.

Examination Procedure Examination Remarks UT VE-04-040 54-ISI-132 SEE FRAMATOME REPORT U2C15-UT-007.

Tuesday, January 11, 2005 Page i of 13

Ir Inservice Inspection Report Interval 3 / Period 2 / Outage 1 (U2-C15)

CLASS:

I CATEGORY: B-D ITEM: B3.140 Summary No.

010500 Component ID STM-23-1-IRS Component Description INLET NOZZLE INSIDE RADIUSSECTION System

System Description

23 STEAM GENERATOR NO. 23 Method Report No.

UT VE-04-037 Examination Procedure 54-ISI-132 Examination Remarks SEE FRAMATOME NDE REPORT U2C15-UT-010 Summary No.

Comoonent ID Component Description System System Descridption 010600 STM-23-O-IRS OUTLET NOZZLE INSIDE RADIUS 23 STEAM GENERATOR NO. 23 SECTION Method Remort No.

Examination Procedure Examination Remarks UT VE-04-038 54-ISI-132 SEE FRAMATOME REPORT U2C15-UT-011.

Summary No.

Component ID Component Description System

System Description

011400 STM-24-1-IRS INLET NOZZLE INSIDE RADIUSSECTION 24 STEAM GENERATOR NO. 24 Method Report No.

Examination Procedure Examination Remarks UT VE-04-042 54-ISI-132 SEE FRAMATOME REPORT U2C15-UT-018.

Summary No.

Component ID Comoonent Description System

System Description

011500 STM-24-O-IRS OUTLET NOZZLE INSIDE RADIUS 24 STEAM GENERATOR NO. 24 SECTION Method Reoort No.

Examination Procedure Examination Remarks UT VE-04-065 54-ISI-132 SEE FRAMATOME REPORT U2C15-UT-019.

ONE INDICATION APPEARED BEYOND THE CLAD ROLL BUT DID NOT WALK INTO THE CLAD SIGNAL. APPEARS TO BE A WELDED OR FORGED ATTACHMENT ON ID.

CATEGORY: B-F ITEM: B5.130 Summary No.

025500 Component ID 2-RC-21-07 Component Description PIPE TO SAFE-END System RC

System Description

REACTOR COOLANT SYSTEM Method PT UT Report No.

VE-04-026 VE-04-077 Examination Procedure 54-ISI-240 54-ISI-836 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-017.

SEE FRAMATOME REPORT U2C15-UT-027.

ITEM: B5.40 Summary No.

Component ID Comoonent Description System

System Description

008000 2-PRZ-21 NOZZLE TO SAFE-END PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks PT VE-04-007 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-007.

UT VE-04-050 54-ISI-829 SEE FRAMATOME REPORT U2C1 5-UT-020.

VT VE-04-051 54-5047902 SEE FRAMATOME REPORT U2C15-VT-001.

EXAMINED IN RESPONSE TO NRC BULLETIN 2004-01.

Tuesday, January 11, 2005 Page 2of 13 Inservice Inspection Report Interval 3 / Period 2 / Outage 1 (U2-C15)

CLASS:

1 CATEGORY: B-F ITEM: B5.40 Summary No.

008100 ComPonent ID 2-PRZ-22 Component Description NOZZLE TO SAFE-END System System Descrintion PRZ PRESSURIZER Method PT UT VT Report No.

VE-04-008 VE-04-057 VE-04-059 Examination Procedure 54-ISI-240 54-ISI-829 54-5047902 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-008.

SEE FRAMATOME REPORT U2C15-UT-021.

SEE FRAMATOME REPORT U2C15-VT-002.

EXAMINED IN RESPONSE TO NRC BULLETIN 2004-01.

Summary No.

Component ID Component Description System

System Description

008200 2-PRZ-23 NOZZLE TO SAFE-END PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks PT VE-04-009 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-009.

UT VE-04-052 54-ISI-829 SEE FRAMATOME REPORT U2C15-UT-022.

VT VE-04-053 54-5047902 SEE FRAMATOME REPORT U2C15-VT-003.

EXAMINED IN RESPONSE TO NRC BULLETIN 2004-01.

Summary No.

ComPOnent ID Component Description System

System Description

008300 2-PRZ-24 NOZZLE TO SAFE-END PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks PT VE-04-010 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-013.

VT VE-04-054 54-5047902 SEE FRAMATOME REPORT U2C15-VT-004.

EXAMINED IN RESPONSE TO NRC BULLETIN 2004-01.

UT VE-04-055 54-ISI-829 SEE FRAMATOME REPORT U2C15-UT-023.

Summarv No.

Component ID Comoonent Description System

System Description

008400 2-PRZ-25 NOZZLE TO SAFE-END PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks PT VE-04-011 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-014.

UT VE-04-056 54-ISI-829 SEE FRAMATOME REPORT U2C15-UT-024.

VT VE-04-058 54-5047902 SEE FRAMATOME REPORT U2C15-VT-005.

EXAMINED IN RESPONSE TO NRC BULLETIN 2004-01.

Summary No.

Component ID Component Descriotion System

System Description

008500 2-PRZ-26 SAFE-END TO NOZZLE PRZ PRESSURIZER Method Report No.

Examination Procedure Examination Remarks PT VE-04-012 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-021.

VT VE-04-060 54-5047902 SEE FRAMATOME REPORT U2C15-VT-006.

EXAMINED IN RESPONSE TO NRC BULLETIN 2004-01.

UT VE-04-061 54-ISI-829 SEE FRAMATOME REPORT U2C15-UT-025.

Tuesday, January11, 2005 Page 3 of 13 ll

I Inservice Inspection Report Interval 3 / Period 2 / Outage 1 (U2-C15)

CLASS: I CATEGORY: B-F ITEM: B5.70 Summary No.

009800 Component ID STM-22-02 Component Description ELBOW TO INLET NOZZLE System

System Description

22 STEAM GENERATOR NO. 22 Method PT UT Report No.

VE-04-013 VE-04-046 Examination Procedure 54-ISI-240 54-ISI-836 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-003.

SEE FRAMATOME REPORT U2C15-UT-004.

RECORDABLE GEOMETRY FROM ROOT AREA INTERMITTENTLY FOR 360 DEGREES.

45 SHEAR = 37.5% COVERAGE 45 RL = 10.2%

60 RL = 10.8%

BEST EFFORT EXAMINATION.

Summary No.

009900 Component ID STM-22-03 Component Description OUTLET NOZZLE TO ELBOW System

System Description

22 STEAM GENERATOR NO. 22 Method PT UT Report No.

VE-04-014 VE-04-047 Examination Procedure 54-ISI-240 54-ISI-836 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-004.

SEE FRAMATOME REPORT U2C1 -UT-005.

RECORDABLE GEOMETRY FROM ROOT AREA INTERMITTENTLY FOR 360 DEGREES.

45 SHEAR = 37.5% COVERAGE 45 RL = 10.2%

60 RL = 10.8%

BEST EFFORT EXAMINATION.

Summary No.

010700 Component ID STM-23-02 Component Description ELBOW TO INLET NOZZLE System

System Description

23 STEAM GENERATOR NO. 23 Method PT UT Report No.

VE-04-015 VE-04-048 Examination Procedure 54-ISI-240 54-ISI-836 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-005.

SEE FRAMATOME REPORT U2C15-UT-008.

RECORDABLE GEOMETRY FROM ROOT AREA INTERMITTENTLY FOR 360 DEGREES.

45 SHEAR = 37.5% COVERAGE 45 RL = 10.2%

60 RL = 10.8%

BEST EFFORT EXAMINATION.

Tuesday, January 11, 2005

'19 Page 4 of 13 Inservice Inspection Report Interval 3 / Period 2 / Outage I (U2-C15)

CLASS:

I CATEGORY: B-F ITEM: B5.70 Summary No.

010800 Component ID STM-23-03 Component Descrition OUTLET NOZZLE TO ELBOW System

System Description

23 STEAM GENERATOR NO. 23 Method PT UT Report No.

VE-04-016 VE-04-049 Examination Procedure 54-ISI-240 54-ISI-836 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-006.

SEE FRAMATOME REPORT U2C15-UT-009.

RECORDABLE GEOMETRY FROM ROOT AREA INTERMITTENTLY FOR 360 DEGREES.

45 SHEAR = 37.5% COVERAGE 45 RL = 10.2%

60 RL = 10.8%

BEST EFFORT EXAMINATION.

CATEGORY: B-G-2 ITEM: B7.30 Summary No.

Component ID Component Description System

System Description

010320 STM-22-OMB-1 OUTLET MANWAY BOLTING 22 STEAM GENERATOR NO. 22 THROUGH 16 Method Report No.

Examination Procedure Examination Remarks VT VT-04-039 12.OHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

010360 STM-22-IMB-1 INLET MANWAY BOLTING 22 STEAM GENERATOR NO. 22 THROUGH 16 Method Report No.

Examination Procedure Examination Remarks VT VT-04-040 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

011220 STM-23-OMB-1 OUTLET MANWAY BOLTING 23 STEAM GENERATOR NO. 23 THROUGH 16 Method Report No.

Examination Procedure Examination Remarks VT VT-04-041 12-QHP-5050-NDE-006 Summarv No.

Component ID Component Description System

System Description

011260 STM-23-IMB-1 INLET MANWAY BOLTING 23 STEAM GENERATOR NO. 23 THROUGH 16 Method Report No.

Examination Procedure Examination Remarks VT VT-04-042 12-QHP-5050-NDE-006 Tuesday, January 11, 2005 13 Page 5 of 13

I Inservice Inspection Report Interval 3 / Period 2 / Outage I (U2-C15)

CLASS: 1 CATEGORY: B-H ITEM: B8.20 Summary No.

008505 Component ID 2-PRZ-20 Component Description VESSEL SUPPORT System

System Description

PRZ PRESSURIZER Method Report No.

MT VE-04-006 Examination Procedure 54-ISI-270 Examination Remarks SEE FRAMATOME REPORT U2C15-MT-001.

INSULATION MUST BE REMOVED BY SECTIONS TO PREVENT INSULATION FALLING.

UT VE-04-078 54-ISI-130 CATEGORY: B-J ITEM: B9.11 Summary No.

Component ID Component Description System

System Description

024200 2-RC-20-10 PIPE TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-024 54-ISI-240 SEE FRAMATOME REPORT U2CI5-PT-022.

Summary No.

Comonent ID Component Description System

System Description

024850 2-RC-21-04 PIPE TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-025 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-016.

UT VE-04-069 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-026..

Summary No.

Component ID Component Description System

System Description

025700 2-RC-22-01 SAFE-END TO ELBOW RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-027 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-018.

UT VE-04-070 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-032.

Summary No.

Component ID Component Description System

System Description

029300 2-RC-25-07 ELBOW TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-028 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-019.

UT VE-04-071 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-033.

Summary No.

Component ID Component Description System

System Description

030250 2-RC-26-08 PIPE TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-029 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-020.

UT VE-04-066 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-034.

Tuesday, January 11, 2005

/a Page 6 of 13

Attachment I Inservice Inspection Report Interval 3 / Period 2 / Outage I (U2-C15)

CLASS: 1 CATEGORY: B-J ITEM: B9.11 Summary No.

033200 Component ID 2-RC-28-16 Component Description PIPE TO ELBOW System

System Description

RC REACTOR COOLANT SYSTEM Method PT UT Report No.

VE-04-030 VE-04-072 Examination Procedure 54-ISI-240 54-ISI-835 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-028.

SEE FRAMATOME REPORT U2C15-UT-042.

Summarv No.

Component ID Component Description System System Descrigtion 034300 2-RC-28-23 TEE TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-031 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-023.

UT VE-04-075 54-ISI-835 SEE FRAMATOME REPORT U2C15-UT-037.

Summarv No.

Component ID Component Description System

System Description

034700 2-RC-28-27 ELBOW TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-032 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-038.

UT VE-04-064 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-038.

Summary No.

Component ID Component Description System

System Description

036400 2-RC-28-37 ELBOW TO PIPE RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04-033 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-002.

UT VE-04-045 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-003.

Summarv No.

Component ID Component Description System

System Description

038700 2-RC-29-09 PIPE TO ELBOW RC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks PT VE-04434 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-029.

UT VE-04.076 54-ISI-835 SEE FRAMATOME REPORT U2C15-UT-043.

Summarv No.

Component ID Component Description System

System Description

039100 2-RC-29-11 PIPE TO ELBOW RC REACTOR COOLANT SYSTEM Method Re ort No.

Examination Procedure Examination Remarks PT VE-04-035 54-ISI-240 SEE FRAMATOME REPORT U2C15-PT-024.

UT VE-04-073 54-ISI-836 SEE FRAMATOME REPORT U2C15-UT-042.

This report number Is the same as for 2-RC-28-16. Framatome will revise.

Tuesday, January 11, 2005 Page 7 of 13

I Attachment I Inservice Inspection Report Interval 3 / Period 2 / Outage I (U2-C15)

CLASS:

1 CATEGORY: B-J ITEM: B9.31 Summary No.

015800 Comnonent ID 2-RC-17-08N Component Description 10-IN. NOZZLE (SET-ON BRANCH CONNECTION)

System RC System Descinption REACTOR COOLANT SYSTEM Method PT UT Report No.

VE-04-017 VE-04-063 Examination Procedure 54-ISI-240 54-ISI-836 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-021.

SEE FRAMATOME REPORT U2C15-UT-035.

CATEGORY: F-A ITEM: F1.10A Summary No.

Component ID Component Description System

System Description

608600 2-GSI-R-590 PIPE SUPPORT COMPONENT GSI SAFETY INJECTION SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-033 12-QHP-5050-NDE-006 ITEM: F1.10B Summary No.

Component ID Component Description System

System Description

607250 2-GSI-R-563 PIPE SUPPORT COMPONENT GSI SAFETY INJECTION SYSTEM Method Renort No.

Examination Procedure Examination Remarks VT VT-04-032 12-QHP-5050-NDE-006 ITEM: F1.10WA Summarv No.

Component ID Component Description System

System Description

603700 2-GRC-R-574 PIPE SUPPORT COMPONENT GRC REACTOR COOLANT SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-044 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

606400 2-GSI-R-546 PIPE SUPPORT COMPONENT GSI SAFETY INJECTION SYSTEM Method Remort No.

Examination Procedure Examination Remarks VT VT-04-035 12-QHP-5050-NDE-006 ITEM: F1.10WB Summary No.

Component ID Component Description System

System Description

605400 2-GRC-R-580 PIPE SUPPORT COMPONENT GRC REACTOR COOLANT SYSTEM Method Remort No.

Examination Procedure Examination Remarks VT VT-04-038 12-QHP-5050-NDE-006 Tuesday, January 11, 2005 Page 8 of 13

I Attachment I Inservice Inspection Report Interval 3 / Period 2 / Outage 1 (U2-C15)

CLASS: 1 CATEGORY: F-A ITEM: F1.10WC Component ID Component Description 2-GRH-V-509 PIPE SUPPORT COMPONENT Summary No.

609400 System

System Description

GRH EMERGENCY CORE COOLING Method Report No.

VT VT-04-037 Examination Procedure 12-QHP-5050-NDE-006 Examination Remarks ITEM: F1.40 Summary No.

Component ID Component Descriotion System

System Description

600005 STM-22-SUPPORT VESSEL SUPPORTS 22 STEAM GENERATORS Method Reoort No.

Examination Procedure Examination Remarks VT VT-04-043 12-QHP-5050-NDE-006 CLASS: 2 CATEGORY: C-A ITEM: C1.10 Summary No.

Component ID Component Description System

System Description

300250 STM-23-07 SHELL TO TRANSITION CONE 23 STEAM GENERATOR NO. 23 Method Report No.

Examination Procedure Examination Remarks UT VE-04-067 54-ISI-130 SEE FRAMATOME REPORT U2C15-UT-016.

Summary No.

Component ID Component Description System

System Description

300260 STM-23-08 TRANSITION CONE TO SHELL 23 STEAM GENERATOR NO. 23 Method Report No.

Examination Procedure Examination Remarks UT VE-04-068 54-ISI-130 SEE FRAMATOME REPORT U2C15-UT-017.

ITEM: C1.30 Summary No.

Component ID Component Description System

System Description

300671 E-CTSHEX-1 TUBE SHEET TO SHELL CTSHE CTS HEAT EXCHANGER X

EAST Method Reprt No.

Examination Procedure Examination Remarks UT VE-04-043 54-ISI-136 SEE FRAMATOME REPORT U2C15-UT-001.

ROOT GEOMETRY SEEN 360 DEGREES AND BELOW RECORDABLE LEVELS.

Tuesday, January 11, 2005 17 Page 9 of 13 Inservice Inspection Report Interval 3 / Period 2 I Outage 1 (U2-C15)

CLASS: 2 CATEGORY: C-B ITEM: C2.21 Summary No.

300790 Component ID W-RHRHEX-OUT Component Description SHELL TO NOZZLE System

System Description

RHRHE RHR HEAT EXCHANGER X

WEST Method PT UT Report No.

VE-04-036 VE-04-044 Examination Procedure 54-ISI-240 54-ISI-136 Examination Remarks SEE FRAMATOME REPORT U2C15-PT-001.

SEE FRAMATOME REPORT U2C15-UT-002.

CATEGORY: C-D ITEM: C4.40 Summary No.

Component ID Component Descridtion System

System Description

322980 MSIV-MRV-210 FLANGE BOLTING MRV MAIN STEAM ISOLATION VALVE-LINE 2-MS-90(B-78,B-79)

Method Report No.

Examination Procedure Examination Remarks UT VE-04-062 54-ISI-840 SEE FRAMATOME REPORT U2C15-UT-025.

WORK PERFORMED UNDER JOA R0250848-06 CATEGORY: F-A ITEM: F1.20 Summarv No.

Component ID Comoonent Description System

System Description

711540 2-GSI-R-537 F-A F1.20ACOMPONENT GSI EMERGENCY CORE COOLING SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-031 12-QHP-5050-NDE-006 Summarv No.

Comoonent ID Component Description System

System Description

715070 2-GSI-R-55 PIPE SUPPORT COMPONENT GSI EMERGENCY CORE COOLING SYSTEM Method Revort No.

Examination Procedure Examination Remarks VT VT-04-036 12-QHP-5050-NDE-006 ITEM: F1.20B Summary No.

Component ID Component Description System System Descridption 711510 2-GSI-R-535 PIPE SUPPORT COMPONENT GSI EMERGENCY CORE COOLING SYSTEM Method Report No.

Examination Procedure.

Examination Remarks VT VT-04-030 12-QHP-5050-NDE-006 Tuesday, January 11, 2005 Page 10 of 13

I Attachment I Inservice Inspection Report Interval 3 1 Period 2 1 Outage 1 (U2-C15)

CLASS: 2 CATEGORY: F-A ITEM: F1.20B Summary No.

762960 Component ID 2-GSI-L-84 Commonent Description PIPE SUPPORT COMPONENT System

System Description

GSI EMERGENCY CORE COOLING SYSTEM Method Report No.

VT VT-04-027 Examination Procedure 12-QHP-5050-NDE-006 Examination Remarks ITEM: F1.20WA Summary No.

Component ID Component Descrition System

System Description

711710 2-GSI-R-668 PIPE SUPPORT COMPONENT GSI EMERGENCY CORE COOLING SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-034 12-OHP-5050-NDE-006 CLASS: 3 CATEGORY: F-A ITEM: F1.30A Summary No.

Comnonent ID Component Description System

System Description

820320 2-GCCW-L-1 09 PIPE SUPPORT COMPONENT GCCW COMPONENT COOLING WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-015 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

820440 2-GCCW-R-137 PIPE SUPPORT COMPONENT GCCW COMPONENT COOLING WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-016 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

822210 2-GCCW-R-77 PIPE SUPPORT COMPONENT GCCW COMPONENT COOLING WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-017 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

830640 2-GESW-R-8 PIPE SUPPORT COMPONENT GESW ESSENTIAL SERVICE WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-020 12-QHP-5050-NDE-006 Tuesday, January 11, 2005

'7 Page 11 of 13

Attachment I Inservice Inspection Report Interval 3 / Period 2 / Outage 1 (U2-C15)

CLASS: 3 CATEGORY: F-A ITEM: F1.30A Summary No.

831310 Component ID 2-GESW-R-56 Component Description PIPE SUPPORT COMPONENT System GESW

System Description

ESSENTIAL SERVICE WATER SYSTEM Method Re VT VT port No.

r-04-018 Examination Procedure 12-QHP-5050-NDE-006 Examination Remarks Summary No.

Component ID Component Description System

System Description

853420 2-GFW-R-180 PIPE SUPPORT COMPONENT GFW FEEDWATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-026 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

853750 2-GFW-R-146 PIPE SUPPORT COMPONENT GFW FEEDWATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-025 12-QHP-5050-NDE-006 ITEM: F1.30B Summary No.

Component ID Component Description System

System Description

822600 2-GCCW-R-586 PIPE SUPPORT COMPONENT GCCW COMPONENT COOLING WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-028 1 2-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

822830 2-GCCW-R-567 PIPE SUPPORT COMPONENT GCCW COMPONENT COOLING WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-029 12-QHP-5050-NDE-006 Summary No.

Component ID Component Description System

System Description

831020 2-GESW-R-70 PIPE SUPPORT COMPONENT GESW ESSENTIAL SERVICE WATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-019 12-QHP-5050-NDE-006 Summary No.

Component ID Comvonent Description System

System Description

856570 2-GFW-L-168 PIPE SUPPORT COMPONENT GFW AUXILIARY FEEDWATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-021 12-QHP-5050-NDE-006 Tuesday, January 11, 2005 Page 12 of 13

Attachment I Inservice Inspection Report Interval 3 / Period 2 / Outage 1 (U2-C15)

CLASS: 3 CATEGORY: F-A Summary No.

853016 ITEM: F1.30WA Component ID Component Description 2-GFW-L-825 PIPE SUPPORT COMPONENT System

System Description

GFW FEEDWATER SYSTEM Method Report No.

VT VT-04-024 Examination Procedure 12-OHP-5050-NDE-006 Examination Remarks Summary No.

Comoonent ID Component Description System

System Description

853650 2-GFW-L-802 PIPE SUPPORT COMPONENT GFW FEEDWATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-023 12-QHP-5050-NDE-006 ITEM: F1.30WB Summar No.

Comgonent ID Component DescripUon System

System Description

853410 2-GFW-L-179 PIPE SUPPORT COMPONENT GFW FEEDWATER SYSTEM Method Report No.

Examination Procedure Examination Remarks VT VT-04-022 12-QHP-5050-NDE-006 Tuesday, January 11, 2005 Page 13of 13

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 4 ABSTRACT OF SYSTEM PRESSURE TESTS RESULTS Inservice Inspection System Pressure Tests were performed during the period June 20, 2003 to November 09, 2004. These tests were performed in accordance with the requirements of ASME Section XI, 1989 (no Addenda) and 1992 Editions with 92 Addenda, Articles IWA-5000, IWB-5000, IWC-5000, IWD-5000, Code Case N-416-1, Code Case N-533 and N-616, as applicable.

Pressure tests for portions of systems identified below were performed during this outage.

The remainder of the pressure tests for the period will be performed in conjunction with functional tests, inservice operation, and special procedures as applicable. No pressure boundary through-wall leaks were identified.

TEST DESCRIPTION DATE R0246859-02 PERFORM DEPRESSURIZED WALKDOWN PER 10/18/04 CODE CASE N-533 R0246859-01 PERFORM RCS VT-2 EXAMINATION @

11/09/04

_ NOP/NOT CONDITIONS R0208655-01, PERFORM VT-2 UNIT 2 NESW SYSTEM 11/12-27/04 02, 03 and 04 I

I

INDIANA MICHIGAN POWER COMPANY COOK NUCLEAR PLANT, BRIDGMAN, MI.

UNIT 2 COMMERCIAL SERVICE DATE 7-1-1978 SECTION 5 ABSTRACT OF SNUBBER EXAMINATION AND TEST RESULTS Snubber examinations and functional testing were performed in conjunction with the maintenance procedures implemented to satisfy technical specification surveillance requirements. Provided is a summary of the as-found visual examinations and as-found functional test results.

Snubber VT-3 Visual Examinations Snubber No.

Exam Date Job Order No.

Results 2-GRC-S537 10-12-04 R0246464 Acceptable 2-GRC-S538 10-12-04 R0246464 Acceptable 2-GRC-S555 10-12-04 R0246464 Acceptable 2-GRC-S562 10-12-04 R0246464 Acceptable 2-GRC-S564 10-12-04 R0246464 Acceptable 2-GRC-S566 10-12-04 R0246464 Acceptable 2-GRC-S573 10-12-04 R0246464 Acceptable 2-GRC-S575 10-12-04 R0246464 Acceptable 2-GRC-S582 10-13-04 R0246464 Acceptable 2-GRC-S592 10-12-04 R0246464 Acceptable 2-GRC-S594 10-12-04 R0246464 Acceptable 2-GRC-S596 10-12-04 R0246464 Acceptable 2-GRC-S598 10-12-04 R0246464 Acceptable 2-GRC-S599 10-12-04 R0246464 Acceptable 2-GRC-S609 10-12-04 R0246464 Acceptable 2-GRC-S611 10-12-04 R0246464 Acceptable 2-GRC-S623 10-12-04 R0246464 Acceptable 2-GRC-S624 10-13-04 R0246464 Acceptable 2-GRC-S626 10-12-04 R0246464 Acceptable 2-GRC-S629 10-12-04 R0246464 Acceptable 2-GRC-S630 10-12-04 R0246464 Acceptable 2-GRC-S632 10-12-04 R0246464 Acceptable 2-GRC-S631 10-12-04 R0246464 Acceptable 2-GRC-S587 10-12-04 R0246464 Acceptable 2-AFW-S4023 10-22-04 R0245347 Acceptable 2-AFW-S4024(L) 10-22-04 R0245347 Acceptable 2-AFW-S4024(U) 10-22-04 R0245347 Acceptable 2-AFW-S4021 10-22-04 R0245347 Acceptable 2-AFW-S4028(L) 10-22-04 R0245347 Acceptable 2-AFW-S4028(U) 10-22-04 R0245347 Acceptable 9'3

INDIANA MICHIGAN POWER COMPANY COOK NUCLEAR PLANT, BRIDGMAN, MI.

UNIT 2 COMMERCIAL SERVICE DATE 7-1-1978 Snubber VT-3 Visual Examinations (continued)

Snubber No.

Exam Date Job Order No.

Results 2-AFW-S4027 10-22-04 R0245347 Acceptable 2-AFW-S4025 10-22-04 R0245347 Acceptable 2-AFW-S4031 10-22-04 R0245347 Acceptable 2-AFW-S4032(L) 10-22-04 R0245347 Acceptable 2-AFW-S4032(U) 10-22-04 R0245347 Acceptable 2-AFW-S4029 10-22-04 R0245347 Acceptable 2-AFW-S4036(L) 10-22-04 R0245347 Acceptable 2-AFW-S4036(U) 10-22-04 R0245347 Acceptable 2-AFW-S4035 10-22-04 R0245347 Acceptable 2-AFW-S4033 10-22-04 R0245347 Acceptable 2-GBD-S563(L) 10-12-04 R0247176 Acceptable 2-GBD-S563(U) 10-12-04 R0247176 Acceptable 2-GBD-S569(L) 10-12-04 R0247176 Acceptable 2-GBD-S569(U) 10-12-04 R0247176 Acceptable 2-GBD-S568 10-13-04 R0247176 Acceptable 2-GCCW-S840 8-28-04 R0240820 Acceptable 2-GCCW-S 843 8-28-04 R0240820 Acceptable 2-OME-3-1-HSD-3U 10-6-04 R0245073 Acceptable 2-OME-3-1 -HSD-3L 10-6-04 R0245073 Acceptable 2-OME 1 -HSD-1 U 10-6-04 R0245073 Acceptable 2-OME-3-1-HSD-1L 10-6-04 R0245073 Acceptable 2-OME-3-2-HSD-3U 10-6-04 R0245073 Acceptable 2-OME-3-2-HSD-3L 10-6-04 R0245073 Acceptable 2-OME-3-2-HSD-1U 10-6-04 R0245073 Acceptable 2-OME-3-2-HSD-1L 10-6-04 R0245073 Acceptable 2-OME-3-3-HSD-3U 10-6-04 R0245073 Acceptable 2-OME-3-3-HSD-3L 10-6-04 R0245073 Acceptable 2-OME-3-3-HSD-1U 10-6-04 R0245073 Acceptable 2-OME-3-3-HSD-1L 10-6-04 R0245073 Acceptable 2-OME-3-4-HSD-3U 10-6-04 R0245073 Acceptable 2-OME-3-4-HSD-3L 10-6-04 R0245073 Acceptable 2-OME-3-4-HSD-1U 10-6-04 R0245073 Acceptable 2-OME-3-4-HSD-IL 10-6-04 R0245073 Acceptable

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI.

COMMERCIAL SERVICE DATE 7-1-1978 Snubber Functional Tests Snubber No.

Test Date Job Order No.

Results Remarks 2-GRC-S537 10-25-04 R0226292 Accept.

Small Bore Grinnell 2-GRC-S564 10-25-04 R0012538 Accept.

Small Bore Grinnell 2-GRC-S566 10-25-04 R0014603 Accept.

Small Bore Grinnell 2-GRC-S587 10-25-04 R0012533 Accept.

Small Bore Grinnell 2-AFW-S4028-U 10-26-04 R0036213 Accept.

Small Bore Grinnell 2-AFW-S4027 10-26-04 R0037673 Accept.

Small Bore Grinnell 2-GBD-S563-U 10-27-04 R0101350 Accept.

Small Bore Grinnell 2-OME-3-2-HSD-IL 10-16-04 R0078798 Accept.

Large Bore 2-OME-3-2-HSD-1U 10-16-04 R0100001 Accept.

Large Bore 2-OME-3-2-HSD-3L 10-18-04 R0078799 Accept.

Large Bore 2-OME-3-2-HSD-3U 10-19-04 R0058811 Accept.

Large Bore The minimum 14% Technical Specification required sample size consists of 7 small bore (Grinnell) and 3 large bore (Steam Generator) snubbers.

g5

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 6 ABSTRACT OF EXAMINATIONS, RESULTS, AND CORRECTIVE ACTIONS FOR ASME SECTION XI, SUBSECTIONS IWE AND IWL Containment Inservice Inspections During the reporting period of June 20, 2003 through November 9, 2004, inservice inspections were performed on the Unit 2 Containment pressure retaining structure in accordance with Subsections IWE and IWL of ASME Section XI, 1992 Edition and 1992 Addenda, and 10 CFR 50.55a.

The following attachment provides a listing of the examinations performed, results, and corrective actions, if any were performed. Visual examinations on pressure retaining bolting were performed along with examinations performed in conjunction with coating repairs, and other repair/replacement activities.

An acceptance criteria providing the acceptable minimum thickness of the containment liner was established for the examination of the concrete-backed liner. The examination results were compared to the acceptance criteria. There were no areas that required to be classified as an Augmented Examination area in accordance with IWE-1240.

Prog. Owner: !n Pi r iS Date: /-7 NIS-1 Attachment Evaluation of IWE As-Found Condition Examination Results 1/7/2005 9:49 AM Page 1 of 3 Daeobivt Exmiatonrm Exam '

IndicatlonslConditlons that led to Disposition*I Date' Unt AI~.r't

.;'Examinatio

"' a,,,..............,.m Meviii!t'hod Degradation (if rejectable)

Cor. Acins 10/2/2004 2

R256824-02 Penetration 2-CPN-76 Flange Bolting VT-1 None Accept 10/3/2004 2

R256824-01 Penetration 2-CPN-67 Flange Bolting VT-1 None Accept 10/3/2004 2

R256824-11 Penetration 2-CPN-71 Flange Bolting VT-1 None Accept 10/13/2004 2

02234043-10 Personnel Airlock 2-AIRLOCK-C612 Various areas prior to VT-3 None Accept paint removal Penetration 2-CPN At the edge of the cooler toward the 10/13/2004 2

03248008-01 flued head to just past the break of the head down toward VT-3 None Accept the main steam line.

Penetration 2-CPN At the edge of the cooler toward the 10/13/2004 2

03247027-01 flued head to just past the break of the head down toward VT-3 None Accept the main stem line.

10/13/2004 2

R256824-09 Penetration 2-CPN-57 Flange Bolting VT-1 Localized general corrosion <5%

Accept 10/14/2004 2

02234043-14 Upper Personnel Airlock Bolting 2-UPLIDH-BOLTING inner VT-1 None Accept door handwheel bolting 10/14/2004 2

02234043-15 Upper Personnel Airlock Bolting 2-UPLIDI-BOLTING inner VT-1 None Accept door interlock bolting 10/14/2004 2

02234043-13 Upper Personnel Airlock Bolting 2-UPLIDH-BOLTING inner VT-1 None Accept door handwheel bolting Arc strikes acceptable per 12-MHP-Penetration 2-CPN Containment Penetration from Weld 5050-SPC-002, flaking, blistering, 10/16/2004 2

03248007-01 Pressurization Channel extending out past radial portion of VT-3 peeling paint, and discoloration Accept flued head to insulation caused by high temps. No base metal degradation.

10/16/2004 2

02234043-12 Upper Personnel Airlock Bolting 2-UPLIDV-BOLTING Inner VT-1 None Accept I__

I door view port bolting I

__I_

References:

1) Report No. NED-1999-00004, Revision 0, titled "ISI Acceptance Criteria for Containment Liner Thickness, Sargent and Lundy Report No.

SL-5360, Rev. 0".

Prog. Owner:

iLb iL Date: /- -05 NIS-1 Attachment Evaluation of IWE As-Found Condition Examination Results 1/7/2005 9:49 AM Page 2 of 3 D

Unt Job Order ino Are Exam Indicatins /Conditions that led to Disposition Date' Unit

-cv h :

Exrmen oA':-M d-Dgaatlon iArea Y Aciiy-Method Degradation (if ejtal)-

Corr. Actions

1) Zone 2-612-5 EL. 637', behind Ice Cond. Between Col. 5

& 6. Section of liner plate approx. 18" long 12" up above General 10/16/2004 2

R0246502-06 Divider Barrier seal. 2) Zone 2-612-20 EL. 638', behind Ice Visual None Accept Cond. Between Col. 20 & 21. Section of liner plate approx.

18" long and 12" up above Divider Barrier seal.

Exam prior to coating removal: 1) Zone 2-612-25B 6' section east of vertical divider barrier seal from EL. 637' down to EL. 627'. 2) Zone 2-612-25A 6' section east of vertical divider barrier seal from EL. 627' down to EL. 612' Coating: peeling, delamnination, 10/19/2004 2

R0246386-07 ad6setoabvhoiotldvdrarerel.3Zne VT-3 chipped paint, cemrentitious materlial.

Accept 2

and 6' section above horizontal divider barrier seal. 3 Zone V

No base metal degradation.

2-612-26A 6' section above horizontal divider barrier seal.

4) Zone 2-612-27A 6' section above horizontal divider barrier seal.

Personnel Airlock 2-AIRLOCK-C612 inner and outer door 10/20/2004 2

R0256824-05 handwheel bolting LPLODH-BOLTING, 2-LPLIDH-VT-I None Accept BOLTING Exam prior to coating removal: Penetration 2-CPN-3 from Coating: flaking, peeling, discoloration, 10/20/2004 2

03248006-01 liner plate weld pressurization channel to 4-pass cooling VT-3 cementitious material. No base metal Accept coil.

degradation.

10/26/2004 2

R256824-04 Personnel Airlock 2-AIRLOCK-C612 outer door electrical VT-1 None Accept

___________penetration 2-LPLODE-BOLTING_

10/25/2004 2

R256824-03 Personnel Airlock 2-AIRLOCK-C612 inner door electrical VT-1 None Accept

____________penetration_2-LPLIDE-BOLTING__

Exam prior to coating removal: Penetration 2-CPN-76 and Coating: flaking, peeling, discoloration, 10/26/2004 2

R246386-07 liner plate at EL. 598 by Column 22 from floor to 4 feet VT-3 mechanical damage. No base metal Accept above floor.

degradation.

References:

1) Report No. NED-1999-00004, Revision 0, titled "ISI Acceptance Criteria for Containment Liner Thickness, Sargent and Lundy Report No.

SL-5360, Rev. 0".

Prog. Owner:

91 At. 8 Date: /- 7-or NIS-1 Attachment 1/7/2005 9:49 AM Evaluation of IWE As-Found Condition Page 3 of 3 Examination Results D:

Date iOrder Exm n

t-ExaminatiitnsConditons that ledto D:,posit Dae Unit.

Activityat crablr

-yeto Degradation (ifejed lor.ectons Personnel Airlock 2-AIRLOCK-C650 upper personnel lock 10/28/2004 2

RI 02265-02 inner and outer door viewport bolting UPLIDV-VT-I None Accept BOLTING, 2-UPLODV-BOLTING 10/28/2004 2

04032011-07 Personnel Airlock 2-AIRLOCK-C612 inner door viewport VT-I None Accept bolting LPLIDV-BOLTING__

10/31/2004 2

6386-7 Exam prior to coating repairs: Zone 2-612-1OB, Zone 2-612 Coating: chipping, flaking, peeling, 1011/204 2 R4636-7 II, 261212, 261213, 261-14, 261-1 13 VT-3 delamination, surface rust. No liner Accept IIB, -612-2B,2-12-13, 2-62-14B 2-61-15Bdegradation noted.

Personnel Airlock 2-AIRLOCK-C612 inner and outer door 11/2/2004 2

RI 02265-01 viewport and electrical penetration bolting LPLIDV-VT1 None Accept 11/22004 2

RI0226-01 BOLTING, 2-LPLOD V-BOLTING, 2-LPLIDE-BOLTING, 2-V-

oeAcp LPLODE-BOLTING Exam prior to coating repair: liner plate at 612 EL of the 11/3/2004 2

R246386-07 East CEQ Fan Room from one vertical divider barrier seal VT-3 Coating: flaking, peeling, discoloration.

Accept to the other divider barrier seal from floor to 1 foot above No liner degradation noted.

weld channel approx. 7 feet above floor.

References:

1) Report No. NED-1999-00004, Revision 0, titled "ISI Acceptance Criteria for Containment Liner Thickness, Sargent and Lundy Report No.

SL-5360, Rev. 0".

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 7 ABSTRACT OF EXAMINATIONS, RESULTS AND CORRECTIVE ACTIONS FOR STEAM GENERATOR EDDY CURRENT EXAMINATIONS 1.0 2004 Steam Generator In-Service Inspections During October of 2004, eddy current inspections were conducted on the Unit 2 steam generators as detailed below. Based upon the favorable results of this inspection and in accordance with the provisions of Technical Specification 4.4.5.3a as noted above, the Unit 2 steam generators continue to be on an inspection interval of up to 40 calendar months. As such, the Unit 2 steam generators will next be inspected in the fall of 2007.

1.1 Unit 2 Steam Generator Description The four replacement Westinghouse model 54F steam generators were initially placed in service in March of 1989.

Each of the replacement steam generators contains 3592 thermally treated (TIE) alloy 690 tubes with an outside diameter of 0.875 inches and a nominal wall thickness of 0.050 inches. All tubes in the eight innermost rows were thermally stress relieved after bending. In addition, the bundle has an increased tube bend radius i.e. row 1 bend radius is equal to 3.14 vs. 2.19 in the original steam generators, which further reduces the residual stress in the U-bend area.

The tube support structures consist of seven 1.12 inch thick support plates with quatrefoil holes and six anti-vibration bars that are located in the u-bend region of the tubes. There is also a flow distribution baffle located between the tubesheet and the first support plate.

The flow distribution baffle is 0.75 inches thick with octofoil holes. The support plates, anti-vibration bars, and the flow distribution baffle are all made of type 405 stainless steel.

The tubesheet is a nominal 21 inches thick and is made of ASME SA-508 Class 2a low alloy steel forging material with Inconel cladding on the primary side.

With the exception of seven tubes that lack hydraulic expansion in either the hot or cold leg tubesheet due to a manufacturing oversight, all remaining tubes are fully hydraulically expanded into the tubesheet.

1.2 Inspection Scope The 2004 Cook Unit 2 steam generator inspection scope consisted of:

25% full length inspection (except Row I and Row 2 U-bends) with a bobbin coil -

All SGs

20% hot leg expansion transition, +/- 3" with a rotating coil - SGs 22 & 23 20% small radius (Row 1 and Row 2) U-bends with a rotating coil - SG 22

Special interest rotating coil examinations in areas of interest reported during the bobbin coil - All SGs 1.3 Inspection Results The bobbin coil sample inspection resulted in eleven indications of potential tube degradation among the four steam generators.

Four of these indications were minor tube support wear indications that had been identified during previous inspections and were in the 2004 inspection plan for continued monitoring.

Review of these indications found essentially no change from the last inspection:

SG Tube Tube Location002 Results 2004 Results

_ Row Column

(% Through-Wall) (% Through-Wall) 21 6

53 5U Hot Leg Support - 0.63" 6

6 21 6

53 6t Hot Leg Support - 0.61 "

11 13 21 6

54 4h Hot Leg Support - 0.64" 7

5 21 6

54 5' Hot Leg Support - 0.62" 4

4 The remaining seven bobbin coil indications of interest required further characterization by rotating examination:

The one distorted tubesheet indication (DTI) was examined and no degradation was detected.

The one permeability variation indication (PVN) was examined and no degradation was detected.

The one distorted support indication (DSI) was examined and a loose part (LPI) was detected. This tube was ultimately plugged due to loose part wear.

The four manufacturing burnish mark indications (MBI) were examined and were identified as volumetric (VOL). As a result of the rotating coil examination and historical comparisons, these four indications were revised to manufacturing burnish mark - history (MBH) indications. That is, a manufacturing burnish mark indication from a previous inspection that had not changed.

No indications of degradation were detected during the planned rotating coil inspections performed at the top of the tubesheet or in the U-bend area.

Special interest inspections were performed on a sample of dings > 2 volts, a sample of freespan indications > 0.50 volts, all tubesheet bulge indications from the programmed bobbin coil tubes, all bobbin "I" codes, all permeability indications and all indications of no hydraulic expansion. In addition, areas where loose parts were identified were also inspected to ensure no tube damage was present. The examinations were all conducted with a rotating coil and detected no degradation.

1.4 Plumged Tubes The tube in location row 46, column 37 in steam generator 22 was plugged due to tube wear from a foreign object. The indication was located just below the hot leg flow distribution baffle and was sized at 25% by the bobbin coil and 33% by rotating coil. As a result, this tube was considered degraded (Ž 20% wall loss). The examination did not identify any other tubes that were degraded or defective and as result, no other tubes were plugged.

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 8 NIS-2 REPAIR AND REPLACEMENT INDEX 33

Unit 2 Cycle 15 ASME Repairs and Replacements Job Order Description Component Code Class 04281076 12 R0037673 01 R0036213 01 04028019 01 R0233734 01 03274024 01 R0247984 01 04259051 01 04281076 03 03267031 01 03268007 01 04028033 02 03216002 01 03238025 01 03238025 02 03171066 02 03171066 15 03171066 17 03171066 22 03237006 05 C0092918 01 C0092918 04 03225029 06 03351050 01 R0214393 01 C0092923 04 R0101350 01 2-ACS-R-5017. CUT SUPPORT, INSTALL. WELD IN PLACE 2-AFW-S4027: REMOVE I FUNCTIONAL TEST ]REPLACE REMOVE/FUNCTIONAL TEST/INSTALL NEW SNUBBER 2-MOD-45672, MODIFY RTD BYPASS MANIFOLD SUPPORT 2-CCW-122 DISASSEMBLE/INSPECT/REPAIRIREPLACE PARTS 2-CCW-135 REPLACE VALVE 2-CCW-142 DISASSEMBLE/INSPECT PER SOER 86-03 2-CPN-66. REPAIR LEAK AT PENETRATION (2-DCR-202) 2-CMM-40151; PREP NEW VALVE FOR INSTALLATION 2-CS-369 REPLACE VALVE BONNET PER EE-2004-0095 2-CS-370 REPLACE VALVE BONNET PER EE-2004-0095 2-MOD-45518, INSTALL CHECK VALVE AND TEST POINT 2-CTS-1 19E. DISASSEMBLE, REPAIR TO STOP BINDING.

REPLACE U2 SGBD PIPING UNDER FLOW INST 2-DFI-411 REPLACE U2 SGBD PIPING UNDER FLOW INST 2-DFI-421 2-FW-1 18-4 REMOVE TEMP MOD/REPAIR BRG COVER 2-FW-118-4 DISASSEMBLE.EXCAVATE CKV BODY ANOMALY 2-FW-118-4 WELD REPAIR EXCAVATED AREAS, REASSEMBLE INSPECT/REPAIR INDICATIONS ON NORTH SIDE OF VLV.

2-FW-132-1 MACHINE VLV BODY GASKET SEATING SURFACE 2-FW-132-2 INSTALL DISC. WIANTI-ROTATION LUGS 2-FW-132-2 INSTALL ANTI-ROTATION LUGS ON NEW DISC 2-FW-132-3. REPLACE BODY TO BONNET GASKET 2-FW-132-3 DISASSEMBLEWINSPECT/REPAIR CHECK VALVE 2-FW-138-3 INSPECT CHECK VALVE, PER 86-03 PROGRAM 2-FW-138-3 INSTALL ANTI-ROTATION LUGS ON NEW DISC 2-GBD-S563-U: REMOVE I FUNCTIONAL TEST /REPLACE 2-ACS-R-5017 2-AFW-S4027 2-AFW-S4028-U 2-ARC-R4007 2-CCW-122 2-CCW-135 2-CCW-142 2-CPN-66 2-CS-269W 2-CS-369 2-CS-370 2-CS-605 2-CTS-1 19E 2-DFI-411 2-DFI-421 2-FW-1 18-4 2-FW-1 18-4 2-FW-1 18-4 2-FW-1 18-4 2-FW-132-1 2-FW-132-2 2-FW-132-2 2-FW-132-3 2-FW-132-3 2-FW-138-3 2-FW-138-3 2-GBD-5563-U 2

2 2

1 2

2 2

Tuesday, January 18, 2005 Page I of 2

Job Order Description Comgottent Code Class Job Order Description Component Code Class 04288060 03 R0226292 01 R0012538 01 R0014603 01 04289031 01 02127061 01 02038052 03 02220023 06 04276008 01 03316029 08 04307059 01/02 03339023 01 03339023 05 03339023 09 R0250848 01 04047056 01 04277047 01 04090049 03 R0252183 01 04276040 14 04276040 22 04281076 01/02/03 03162051 01 R0246683 05 R0255732 06 R0255731 05 04118056 01 R0230508 03 2-GRC-R-574 REPAIR GAP AT BEARING LOCATION 2-GRC-S537: REMOVE/TEST AND INSTALL NEW SNUBBER 2-GRC-S564: REMOVE I FUNCTIONAL TEST IREPLACE 2-GRC-S566: REMOVE I FUNCTIONAL TEST /REPLACE 2-GRH-R-817 REPAIR PIPE HANGER NEXT TO 2-RH-1 16E 2-LDCP-5205 REWORK AND INSPECT HANGERS 2-ICM-321. REPLACE BONNET 2-ICM-321-ACT TACK WELD YOKE TO VALVE BONNET 2-ILA-121-V1 INVESTAGATE AND REPAIR BORON LEAK 2-ILA-202, REPLACE FASTENERS AND INCREASE TORQUE 2-CMM-40155; INSTALL HOT TAP TO RHR SUCTION 2-MOD-35533, REPLACE VALVES 2-IRV-310, 311. & 320 2-MOD-35533, REPLACE VALVES 2-IRV-310, 311, & 320 2-MOD-35533. REPLACE VALVES 2-IRV-310. 311, & 320 2-MRV-210 DISASSEMBLE/REFURBISH THE VALVE ASSEMBLY 2-MRV-241 REPAIR VALVE LEAK BY 2-MS-1 35-1. WELD REPLACE VALVE 2-OME-3-1, RESTORE SECONDARY MANWAY FROM TEMP. MOD 2-OME-3-4 REPLACE MANWAY STUDS AND NUTS AS NEEDED 2-PP-50W, INSTALL NEW PUMP ASSEMBLY EE-2003-0619 2-PP-50W, RE-INSTALL PUMP DIACHARGE PIPE 2-CMM-40151; REPLACE PIPING 2-PW-275, REPLACE WELDED CHECK VALVE(EE-2003-0003) 2-SV-45A REMOVE/REPLACE VALVE FOR TESTING 2-SV-45B REMOVEIREPLACE VLV FOR SETPOINT TESTING 2-SV-45C, REMOVE/REPLACE VALVE FOR TESTING 2-SV-51; REPLACE WITH NEW VALVE AND TEST 2-TK-86 OPEN/CLOSE TO ACCESS 2-SV-344E FOR TESTING 2-GRC-R-574 2-GRC-S537 2-GRC-S564 2-GRC-S566 2-GRH-R-817 2-GRH-R810 2-ICM-321 2-ICM-321 2-ILA-121-Vl 2-ILA-202 2-IMO-390 IRV-310 2-IRV-311 2-IRV-320 2-MRV-210 2-MRV-241 2-MS-135-1 2-OME-3-1 2-OME-3-4 2-PP-50W 2-PP-50W 2-PP-50W 2-PW-275 2-SV-45A 2-SV-45B 2-SV-45C 2-SV-51 2-TK-86 1

1 I

2 2

1 2

2 2

2 I

1 2

2 2

Tuesday, Januaty 18, 2005 Page 2 of 2

, G_

INDIANA MICHIGAN POWER COMPANY DONALD C. COOK NUCLEAR PLANT, UNIT 2 BRIDGMAN, MI COMMERCIAL SERVICE DATE 7-1-1978 SECTION 9 NIS-2 REPAIR AND REPLACEMENT REPORTS

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 Date 10-23-04 Sheet I of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address Unit 2

Component 2-ACS-R-501,d>7 Ko, JOB ORDER No. 04281076-12

/ l Repair Org. P.O. No., Job No., etc

3. Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridirnan. MI 49106 Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NJA Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of 7

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ARC-R-5017 1/8' N/A M&E 30-044313 N/A ER 70S-2 N/A REPLACED NO WELD FILLER ASP 28160 MATERIAL

.l

4.

4..4 44

+.

4.

.4 4

4

+

4 J _________________

I _______

.L _______________

I

7.

Description of Work CUT SUPPORT AND REWELD TO ALLOW PIPE INSTALLATION

8.

Test Conducted: Hydrostatic Pneumatic nL NominalOperatingPressure El Other Li PT Pressure N/A psi. Test Temp.

N/A F

37 INIT...t

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 04281076-12

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A conforms to the rules of the Signed avnd imrmon Owner or Owner's Designee, 1 Maintenance Weldina Supervisor Date.-22,ee 6

,20 01c' CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

have'inspected the components described in this Owner's Report during the period C/9/49

/5 to

/___/_______

, and state that to the best of my knowledge and belief, the Owner has p6rfbrmed examinations andl taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspector nor his employer shall be liable in any a er for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

l nents Date - /

f/ 20A a

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address Date 10-26-04 Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman. Ml 49106 Unit 2

Component 2-AFW-S4027 JOB ORDER No. R0037673-01 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridgman. MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of, '

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stampe ASP, PO) d (Yes o r N o) 2-AFW-S4027 SNUBBER GRINNELL M&E 30-024683 N/A N/A N/A

Replacement

- NO ASP # 29372 SEAL KIT GRINNELL M&E 30-025060 N/A N/A N/A Replacement NO ASP-26432

'A' SEAL KIT GRINNELL M&E 30-040591 N/A N/A N/A Replacement NO ASP-28476 BUSHING PISTON GRINNELL M&E 30-024791 N/A N/A N/A Replacement NO ASP-23023

7.

Description of Work REPLACED SNUBBER

8.

Test Conducted: Hydrostatic FlPneumatic IIINominalOperatingPressure n Other I VT-3 Pressure N/A Psi. Test Temp.

N/A F

INI4 l

jZsX 39

Page 3 of 2 FORM NIS-2 (Back)

Job Order/File R0037673-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules.of the ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.

N/A Expiration Date N/A

./

/ons Sinned Maintenance Weldino Suoervisor Date

/;./.

//

,20 Add Owner or Owner's Designee, 1 L

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS hhav inspp cted the components described in this Owners Report during the period _

_/__

__CDto

/6/6-/60

, and state that to the best of my knowledge and belief, the Owner ha6 performed examinations and taken borrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neitherthe Inspector nor his employer makes anywarranty, expressed or implied, conceming the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspector nor his employer shall be liable in any mape for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/1 ol--'iCommissions V,5t & -3i G,797/

esc-y Inspector's Signdtur`&"

Date 0 c National Bolard, Statd, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-27-04 Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address Unit 2

Component 2-AFW-S4028-U JOB ORDER No. R0036213-01 Repair Org. P.O. No., Job No., etc Jype-Code-Symbol-Stamp. N/A Authorization No.

N/A Expiration Date NIA 3._Work Performed by-AEP/D.C. COOK Maint. Devartment Name One Cook Place, Bridgman, MI 49106 Address

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. N/A Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stampe ASP, PO) d (Yes or No) 2-AFW-S4028-U SNUBBER GRINNELL M&E 30-024683 N/A N/A NIA Replacement NO ASP # 29372 SEAL KIT GRINNELL M&E 30-025060 N/A N/A N/A Replacement NO ASP-26432 A SEAL KIT GRINNELL M&E 30-040591 N/A N/A N/A Replacement NO ASP-28476 BUSHING PISTON GRINNELL M&E 30-024791 N/A N/A N/A Replacement NO ASP-20905

7.

Description of Work REPLACED SNUBBER

8.

TestConducted: Hydrostatic RPneumatic LNominal Operating Pressure LI Other n3 VT-3 Pressure N/A osi. Test Temp.

N/A F

.Page 3 of 2 FORM NIS-2 (Back)

Job OrderlFile R0036213-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT _

conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.

NIA Expiration Date N/A Signed monT Owner or Owner's Designee,1 Maintenance Weldina Suiervisor Date

/

,20 Oc7 I

CERTIFICATE OF INSERVICE INSPECTION l, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS i

have inspected the components described in this Owner's Report during the period

/a'A/

" to ____________,and state that to the best of my knowledge and belief, the Owner has performed examinations and tAen corrective measures described In this Owners Report In accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any map ner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions /1V8k1*

h /1 vCa7 t

V is Inspectore SIgi42O--zI Date

/,2/-)20 NationalfBoafd, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 Date 10-09-04 Sheet 1 of 3 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address Unit 2

Component 2-ARC-R4007 JOB ORDER No. 04028019-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridaman, MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A

4.

Identification of System:

REACTOR COOLANT ISI CLASS I

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ARG-R4007 STEEL ANGLE N/A M&E 30-153034 N/A ASTM A36 N/A ADDED NO 4 x 4" x 3/8.

ASP 18841 1990 5I8" PLATE N/A M&E 30-153194 N/A ASTM A36 N/A ADDED NO ASP 23756 1990 TUBE STEEL N/A M&E 30-153269 N/A ASTM A500 N/A ADDED NO 4" x4 x' ASP29063 1990 2 PLATE N/A M&E 30-153250 N/A ASTMA36 N/A ADDED NO ASP 16017 1990

7.

Description of Work ADD A SUPPORT TO PIPING

8.

Test Conducted: Hydrostatic []Pneumatic

[iNominal Operating Pressure

[]

Other E1 MT, VT-3 Pressure N/A psi. Test Temp.

NIA F

z11s INI

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN-ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-09-04 Sheet 2

of 3

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridoman, Ml 49106 Address Unit 2

Component 2-ARC-R4007 JOB ORDER No. 04028019-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA

4.

Identification of System:

REACTOR COOLANT ISI CLASS I

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A -Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ARC-R4007 FIG i37 GRINNELL M&E 30-024116 N/A N/A N/A ADDED NO U-BOLT ASP 16149 i

Ii i

t i

4-4 i

I 4

i

7.

Description of Work ADD A SUPPORT TO PIPING

8.

TestConducted: Hydrostatic FiPneumatic LINominal Operating Pressure LI Other LI MT. VT-3 Pressure N/A Dsi. Test Temp.

N/A F

i/ q INM

Page J of 3 FORM HIS-2 (Back)

Job Order/File 04028019-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed a

e Timmons Owner or Owner's Designee, '

MaintenrinnoA Weldinri Runprvisnr Date ____

. 20 05 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have lospected the components described In this Owners Report during the period to

&ZO c-

, and state that to the best of my knowledge and belief, the Owner has performed examinations and tak6n corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore,neitherthe Inspectornorhisemployer shall be liable in any manner r any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

w

/

Commissions, Stal7e 7 97/

a Inspectores SignattfeV JationaI Board, State, Province, and Endorsements Date 200

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address

3.

Work Pe'rformed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, Mi 49106 Date 10-17-04 Sheet I of 2 Unit 2

Component 2-CCW-122 JOB ORDER No. R0233734-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System: COMPONENT COOLING WATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CCW-122 VALVE CENTERLINE M&E 30-034578 NIA DEDICATION N/A REPLACED NO ASP 29322 PLAN PV-0057 AS 2932

7.

Description of Work REPLACE VALVE

8.

Test Conducted: Hydrostatic 1 Pneumatic III Nominal Operating Pressure Fx Other []

VT-2, Pressure N/A oSi. TestTemp.

N/A F

Page 2 of FORM NIS-2 (Back)

Job Order/File R0233734-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xi.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed De mwns Owner or Owner's Designee, 1 Maintenance Weldinq Supervisor Date U,4A S

.20 06fs CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS hav in~pected the components described In this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owndr has performed examinations a d ken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector norhis employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspector nor his employer shall be liable in any m for any personal Injury orproperty damage or a loss of any kind arising from or connected with this inspection.

O f

pr Commissions NP--4071 /1)/ 369 7J Inspectors Signatdre Date 0 OU National Board, State, Province, and Endorsements 97

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Date 10-14-04 Name P.O. Box 60 Fort Wayne, IN 46801 Address Sheet 1 of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI49106 Address Unit 2

Component 2-CCW-135 JOB ORDER No. 03274024-01 Repair Org. P.O. No., Job No., etc

3. Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridgman, Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System: COMPONENT COOLING WATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI-B31.1 -1983 Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of

/

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CCWI 35 VALVE M&E 30-037575 N/A ASME SA479 REPLACED ASP 29211 TP316

7.

Description of Work REPLACED VALVE

8.

Test Conducted: Hydrostatic nPneumatic n NominalOperatingPressurei Other n VT-2 Pressure N/A Psi. Test Temp.

N/A F

IN

Page 3 of 2 FORM NIS-2 (Back)

Job OrderlFile 03274024-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE

/

Certificate of Authorization No.

N/A Expiration Date N/A Signed O a

Owner or Date oC.

J' 20 O6f Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michiqan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

in pected the components described in this Owner's Report during the period ________

mto

_______o

. and state that to the best of my knowledge and belief, the Owner' has performed examinations a1d taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective asures described in this Owner's Report. Furthermore, neitherthe Inspector nor his employer shall be liable in any man f r anypersonal injuryor property damage ora loss of any kind arising from or connected with this inspection.

Inspector's Signatuiv National Board, S'tate/Province, and Endorsements Date 02

/

20 CT,

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne, IN 46801 Date 10-12-04 Sheet I of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, MI 49106 Address Unit 2

Component 2-CCW-142 JOB ORDER No. R0247984-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address

4.

Identification of System: COMPONENT COOLING WATER Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CCW-142 VALVE CENTERLINE M&E 30-034576 N/A DEDICATION N/A

REPLACED NO ASP 29202 PLAN PV-0057

7.

Description of Work REPLACE VALVE

8.

Test Conducted: Hydrostatic M Pneumatic FINominal Operating Pressure Other LI VT-2, Pressure N/A psi. Test Temp.

N/A F

5 wX

.4 INIT/~

Page 2 of FORM NIS-2 (Back)

Job OrderlFile R0247984-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME. Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed,je2ve4Tfmmons Owner or Owner's Designee, '

Maintenance Weldina Sunervisor Date:m_7;

, 20 go CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued bythe National Board of Boilerand Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS X

havd inspected the components described In this Owner's Report during the period _

_/______

/

__ __to

/JZ/6'/

ir1

, and state that to the best of my knowledge and belief, the Ownei/has Performed examinations adhd taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and crrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.,')

Commissions

/0

/7 97) v

£617 7

InspectoresiSIgnture National Board, State, Province, and Endorsements Date 1/ 2 S_

I,20C

.57

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman. Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridaman. Ml 49106 Date 10-5-04 Sheet I of 2 Unit 2

Component 2-CPN-66 JOB ORDER No. 04259051-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

NUCLEAR SAMPLING PENETRATION

[SI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed, N/A Add. Code Case N-416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CPN-66 1/16" N/A M&E 30-045071 NIA ER 316 N/A REPLACED NO WELD FILLER ASP 1191 MATERIAL

7.

Description of Work REPAIRED WELD AT PENETRATION

8.

Test Conducted: Hydrostatic n Pneumatic EI Nominal Operating Pressure M

Other I

PT Pressure N/A psi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 04259051-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed Deyne Vermons Owner or Ownier's Designee, 1 Maintenanrc We1rfinn 5iinaniSnr Date 4/O4,l'

,20 a O

......v....

,,....H _M....

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have inspeptedlthe components described in this Owner's Report during the period le i

C/6).

to

/1

, and state that to the best of my knowledge and belief, the Owner Wfas performed examinations and taken o6rrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes any warranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhis employer shall be liable in any annerforanypersonal injuryorpropertydamage ora lossofanykindarisingfrom orconnectedwith this inspection.ff//

InspectoeSig'Y Date 0;//

20 =

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, Ml 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridgman, Ml 49106 Date 10-15-04 Sheet I

of 2 Unit 2

Component 2-CS-269W JOB ORDER No. 04281076-03 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, P0)

(Yes or No) 2-CS-269W VALVE'DISC N/A M&E 30-034029 NIA ASME SA351 N/A REPLACED NO ASP 16517 GR CF8

7.

Description of Work REPLACED VALVE DISC

8.

Test Conducted: Hydrostatic Pneumatic FLNominal Operating Pressure L Other Pressure NIA isi. Test Temp.

NIA F

INIT6

-5:

Page 2 of 2 FORM NIB-2 (Back)

Job Order/File 04281076-03

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certfy that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforns to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date NIA Z>

Signed mons Owner or Owners Designee, 1 Maintenance Welding Sucervisor Date,/°/

/^

20 MARC CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS haveinspected the components described in this Owner's Report during the period g/7:i75-s to

.o/d l

, and state that to the best of my knowledge and belief, the Owner has Oerformed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinations and corrective measures descnbed in this Owners Report. Furthermore, neitherthe Inspector nor his employer shall be liable in a manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

__________________Commissions AB977 a/

te7>

Inspectors Sige 7 Date

/

00 National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address Date 10-19-04 Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman. MI 49106 Unit 2

Component 2-CS-369 JOB ORDER No. 03267031-01 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint Departnent Name One Cook Place. Bridgman, Ml 49106 Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date NIA ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(e ASP PO)or No) 2-CS-369 VALVE M&E 30-040530 NIA ASME SA351 NIA REPLACED NO BONNET ASP 28652 GR CF8

%" STUD NIA M&E 30-040599 N/A ASME SA453 N/A REPLACED NO ASP 28399 GR 660 CL B 1/2" NUTS NIA M&E 30-212070 N/A ASME SAI 94 N/A REPLACED NO ASP 22002 GR 8FH

7.

Description of Work REPLACED VALVE BONNET AND BOLTING

8.

Test Conducted: Hydrostatic L Pneumatic liNominal Operating Pressure FR Other LI VT-2 Pressure N/A psi. Test Temp.

NIA F

44 INI

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03267031-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed -ewav qTimmons

.Owner or Owner's Designee, '

Maintenance Wpldinn Singrvi5or Date i

. /3-.

20 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS X

have in e ted the components described in this Owner's Report during the period to _________

,_and state that to the best of my knowledge and belief, the Own ~hai'performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinationsand corrective measures described In thisOwner's Report. Furthermore,neitherthe Inspectornorhisemployer shall be liable in anymannerforanypersonal injuryor propertydamage ora loss of anykind arising from orconnected with this inspection

/'

Commissions./6' 77 A/1317

Inspectors Signa ure National Board, State, Province, and Endorsements 57

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Date 10-19-04 Name P.O. Box 60 Fort Wayne, IN 46801 Address Sheet I of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address Unit 2

Component 2-CS-370 JOB ORDER No. 03268007-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridgman, Ml 49106 Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL Type Code Symbol Stamp NJA Authorization No.

N/A Expiration Date NIA ISI CLASSX2a-ActdlV t

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material MaE, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CS-370 VALVE M&E 30-040530 N/A ASME SA351 N/A REPLACED NO BONNET ASP 29380 GR CF8

/2" STUD N/A M&E 30-040599 N/A ASME SA453 N/A REPLACED NO ASP 29190 GR660

/2" NUTS N/A M&E 30-212070 NIA ASME SAI 94 N/A REPLACED NO ASP 22002 GR 8FH

7.

Description of Work REPLACED VALVE BONNET AND BOLTING

8.

Test Conducted: Hydrostatic li Pneumatic [ Nominal Operating Pressure IZ]

Other n VT-2 Pressure NIA psi. Test Temp.

N/A F

INT1i i/01'

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03268007-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate.of Authorization No.

NIA Expiration Date N/A conforms to the rules of the Signed De

_ e

- Owner or Owner's Designee, i Maintenance Weldina Supervisor Date; (

2/3

,20e CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS hae Inspected the components described In this Owner's Report during the period J________to

_/

and state that to the best of my knowledge and belief, the Owner has performed examinations and (aken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any m er for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

C-commissions

/f1 I 3crd c7 National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman. Ml 49106 Address

3. Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridcman. MI 49106 Date 10-20-04 Sheet I

of 2 Unit 2

Component 2-CS-605 JOB ORDER No. 04028033-02 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A 4.

5.

6.

Address Identification of System: CHEMICAL AND VOLUMN CONTROL ISI CLASS 3 (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CS-605 VALVE ENERTECH M&E 30-038925 N/A ASME SA 479 N/A REPLACED NO ASP 29376 TP316 FLANGE N/A M&E 30-022130 N/A ASME SA 182 N/A REPLACED NO ASP 16299 GR 304 5/8" NUT N/A M&E 30-212090 N/A ASME SA 193 NIA REPLACED NO ASP 28983 GR8F l

5/8" ROD N/A M&E 30-212290 N/A ASME SA 453 N/A REPLACED NO ASP 28452 GR 660 7.

8.

Description of Work REPLACE VALVE, FLANGES, AND BOLTING Test Conducted: Hydrostatic R Pneumatic Dl Nominal Operating Pressure W

Other F: PT. RT. VT-2.

Pressure N/A osi. Test Temp.

N/A F

IN

/It

Page 2 of FORM NIS-2 (Back)

Job Order/File 04028033-02

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conformslo the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed i

mmos

.Owner orltwner's Designee, 1 Maintenance Weldina Sunervisor Date O.c9?

.20 4;

I CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

, I heveinspected the components described In this Owner's Report during the period Vi//24 to

/

i and state that to the best of my knowledge and belief, the Owffer Has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any manrger for any persona! injury or property damage or a loss of any kind arising from or connected with this Inspection.

a t I Date

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 Date 8-6-03 Sheet I of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridgman. Ml 49106 Address Unit 2

Component 2-CTS-119E JOB ORDER No. 03216002-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridgman. MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

CONTAINMENT SPRAY ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-CTS-1 I 9E VALVE STEM NI/A M&E 30-033600 N/A ASTM A564 N/A REPLACED NO ASP 16712 TP360 H1150 DISC N/A M&E 30-033600 N/A ASME SA479 N/A REPLACED NO MALE/FEMALE ASP 16712 TP316

7.

Description ofWork REPLACED DISCAND STEM

8.

TestConducted: Hydrostatic nPneumatic iNominalOperatingPressure Other VT-2 Pressure N/A Msi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03216002-01

9. Remarks:_.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement Type Code Symbol Stamp NONE conforms to the rules of the Certificate of Authorization No.

NIA Expiration Date NIA Signed ae ns Owner or Owners Designee, ;

Maintenance Weldino Supervisor Date 74.

20 01' CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS have inspected the components described in this Owners Report during the period 70to :;?

to

/

o and state that to the best of my knowledge and belief, the Owner has performed examinations and (aken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any mannfor any personal injuryor propertydamage or a loss of any kind arising from or connected with this inspection.

,, A/f Commissions Aya?

N/

3,0,77x-National Boaird, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Date 10-27-04 Sheet I

of 2 Unit 2

Component 2-DFI-411 JOB ORDER No. 03238025-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A Address

4.

Identification of System:

GENERATOR BLOWDOWN ISI CLASS 2

5. (a) Applicable ConsL Code ANSI B31.1 1983 Ed. NIA Add. Code Case N-416-1

-(b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-DFI-411 2" PIPE NIA M&E 30-016732 N/A ASME SA376 N/A REPLACED NO ASP 16393 TP304 2" ELBOW N/A M&E 30-016998

. NIA ASME SAI 82 N/A REPLACED NO ASP 25415 TP304

7.

Description of Work REPLACED PIPE AND FITTINGS IN AREA OF 2-DFI-411

8.

Test Conducted: Hydrostatic E Pneumatic n Nominal Operating Pressure Other LI PT. VT-2 Pressure N/A psi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile 03238025-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date NIA Signed Timons Owner or Owner's Designee,'

Maintenance Welding Supervisor Date _

C_-I,

. 20 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michican and employed by ABS GROUP INC.

of HOUSTON, TEXAS i

/

havezirpected the components described In this Owner's Report during the period

///6 a

to 1111eMV and state that to the best of my knowledge and belief, the Owner has performed examinations add tiken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective asures described in thisOwner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any manne f r any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

17A.

Z l

Itha

-- ti KUs'.>-L Commissions

/11 r'4v// s

^' L'

^

I 5 _

I Inspectors Signature V

Vt I-it-National Board, State, Province, and Endorsements Date -

/

20 e___

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Date 10-16-04 Sheet I of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridoman. Ml 49106 Unit 2

Component 2-DFI-421 JOB ORDER No. 03238025-02 Repair Org. P.O. No., Job No., etc Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address

4.

Identification of System:

GENERATOR BLOWDOWN Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A I1SI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identificatio'n of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturef/

Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-DFI-421 2"PIPE N/A M&E 30-016732 N/A ASME SA376 N/A REPLACED NO ASP 16393 TP304

7.

Description of Work REPLACED PIPE IN AREA OF2-DFI-421

8.

Test Conducted: Hydrostatic [m Pneumatic [n NominalOperatinglPressure Other FI VT-2 Pressure N/A psi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03238025-02

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization Noa/

N/A Expiration Date N/A Signed Deway e immons Owner or Owner's Designee,1 Maintenance Weldina Supervisor Dateae,,

F,.

.20 04'

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS 4,

hav~einspected the components described in this Owner's Report during the period

/O L/D 5A- '

to

/'i/17 Z7

, and state that to the best of my knowledge and belief, the Own'erfas performed examinations Ad taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspectornorhis employer shall be liable in any maner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

, /

Date

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address Date 0 8-20-03 Sheet I of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, MI 49106 Address Unit 2

Component 2-FW-118-4 JOB ORDER No. 03171066-15,17.22 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint Department Name One Cook Place. Bridaman, Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI-B31.1-1983 Ed. N/A Add. Code Case N416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 18-4 VALVE BODY N/A EXISTING N/A ASTM A216 N/A REPAIRED NO GRWCB FILLER N/A M&E 00-035574 N/A E7018-Al N/A REPAIRED NO MATERIAL ASP 28001&

28007 7/8" STUDS N/A M&E 00-034468 ASME SA1 93 N/A REPLACED NO ASP 26173 GRB7 7/8' NUTS N/A M&E 30-211900 ASME SA1 94 N/A REPLACED NO

-ASP 15684 GR 2H

7.

Description of Work REPLACED COVER BOLTING, MACHINED SIDE COVERS, REPAIR WELDED BODY.

8.

Test Conducted: Hydrostatic n Pneumatic FINominal Operating Pressure Eli Other LI

, VT-2, MT Pressure N/A psi. Test Temp.

N/A F

/

Page 22 of 2 FORM NIS-2 (Back)

Job Order/File 03171066-15,17,22

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We cerify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the

Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed I wzav7\\ti m

-Owner or Owner's Designee, 1 Maintenance Welding Supervisor Date,>2~

,20 &5 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

. /.

hav h

ineed the components described in this Owner's Report during the period ________3

_to

./,

and state that to the best of my knowledge and belief, the Owner/has'performed exmlna ons add taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

,,? /

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 8-15-03 Sheet I of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman, MI 49106 Unit 2

Component 2-FW-1 18-4 JOB ORDER No. 03171066-02 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridgman, Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

FEEDWATER

[SI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components

/.

Name of Name of

/

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 18-4 7/8"STUDS N/A M&E 30-034468 N/A ASTM SA193 N/A REPLACED NO ASP 26173 GRB7 7/8" NUT N/A M&E 30-211900 N/A ASTM SA 194 N/A REPLACED NO ASP 15684 GR2H

7.

Description of Work REPLACED BEARING COVER STUDS AND NUTS AND MACHINED EXISTING COVER

8.

Test Conducted: Hydrostatic Pneumatic E Nominal Operating Pressure nx Other n PT, VT-2 Pressure N/A psi. Test Temp.

N/A F

I NJ 1 FA 70

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03171066-02

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed ewa Kimons Owner or Owner's Designee, 1 Maintenance Weldinn Stinguvisor Date -20 i

. 20

/

I CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

have/insoected the components described In this Owner's Report during the period _/___

__ to

/L1//4/>ef'

. and state that to the best of my knowledge and belief, the Ownef ha6 performed examinations and tarken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrpcfe measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in y an er for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Ai /

imissions/

/66;79'7 R1/

8 6t'M 7(7-National Board, State, Province, and Endorsements 7/

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne, IN 46801 Date 10-07-04 Sheet I of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address Unit 2

Component 2-FW-132-1 JOB ORDER No. 03237006-05 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. MI 49106 Type Code Symbol Stamp JNA Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI-B31.1-1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 32-1 MACHINED EXISTING REPAIRED BONNET

7.

Description of Work MACHINED VALVE BONNET. MT SURFACE AREA

8.

Test Conducted: Hydrostatic ElPneumatic nINominalOperatingPressure Other LI MT Pressure NIA psi. Test Temp.

N/A F

AlIl/(

Page 3 of 2 FORM NIS-2 (Back)

Job Order/File 03237006-05

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed Degayne mocs Owner or Owner's Designee, '

Maintenance Welding Sunervisor Date 20 67 I

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS hay 6jnspected the components described in this Owner's Report during the period _____ __ ___________to

/-

. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspector nor his employer shall be liable in rnyminner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspectorpn /

Commissions N83 &fl7Tf Eli tTni77 11.

Inspec to ?s SJ 20 Date I 2

_______2_Z)

National Board, State, Province, and Endorsements v73

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-19-04 Sheet 1 of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridqman. MI 49106 Unit 2

Component 2-FW-132-2 JOB ORDER No. C0092918-01 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. Ml 49106 Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. NIA Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturet Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 32-2 DISC N/A M&E 30-034386 N/A ASME SA675 N/A REPLACED NO ASP 16712 GR 70

7.

Description of Work REPLACED DISC

8.

Test Conducted: Hydrostatic 11 Pneumatic El Nominal Operating Pressure iFi Other L

_ Pressure NIA psi. Test Temp.

N/A F

-7 /

/I INTII/

zA, I/

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File C0092918-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No./ NIA Expiration Date NIA conforms to the rules of the Signed n

ee Owner or Owner's Designee, '

Miinl~n~inrP WAldinri Smunkmrvi

Date, 9

.20 C<

M _ M _

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

have inpected the components described in this Owner's Report during the period ____________ to I/9/a

, and state that to the best of my knowledge and belief, the Owner has'performed examinations ind taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correctiveze easures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any mannr ror any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

At /

./Li PV Commissions AN

(

04Y < 5 X/9-National Board.-State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne, IN 46801 Address Date 10-16-04 Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridgman, Ml 49106 Address Unit 2

Component 2-FW-132-2 JOB ORDER No. C0092918-04 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

FEEDWATER SYSTEM ISI CLASS 2

5. (a) Applicable Const. Code ANSI 831.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-132-2 LUG-N/A M&E 30-153150 N/A ASTM A36 N/A REPLACED NO MATERIAL ASP 23052 1990

7.

Description of Work INSTALLED ANTI ROTATION LUGS

8.

Test Conducted: Hydrostatic L Pneumatic El Nominal Operating Pressure Other L1 MT Pressure N/A osi. Test Temp.

N/A F C]

74

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File C0092918-04

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed -immons Owner or Owner's Designee, 1 Maintenance Weldinn Sunervisor Date /1/ry-3d

.20 4e-CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS I

have Inspected the components described in this Owner's Report during the period _________

to _

./

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or Implied, concerning the examinations and corrective measures described In thisOwners Report. Furthermore,neitherthe Inspectornorhisemployer shall be liable in any mannerforanypersonal injuryorpropertydamage ora loss of anykind arising from orconnected with this Inspecti n.0f Commissions

-1'$7cWs Inspectoes ig National Board, State, Piovince, and Endorsements Date 77

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 08-20-03 Sheet I of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman. MI 49106 Unit 2

Component 2-FW-132-3 JOB ORDER No. 03225029-06 Repair Org. P.O. No., Job No., etc Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI-B31.1-1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 32-3 BONNET N/A M&E 30-034343 N/A ASTM A675 N/A REPLACED NO ASP 19240 GR 70

7.

Description of Work REPLACED BONNET

8.

Test Conducted: Hydrostatic FlPneumatic F

Nominal Operating Pressure Other F VT-2 Pressure N/A psi. Test Temp.

N/A F

7$4~

"1----

Page 3 of 2 FORM NIS-2 (Back)

Job Order/File 003225029-06

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this -REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No/ N/A Expiration Date N/A conforms to the rules of the Signed D

Owner or Owner's Designee, 1 Maintenance Welding Supervisor Date gclL

. 20 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

haye ipected the components described in this Owner's Report during the period si/63 to

/&

Ir4,d'

, and state that to the best of my knowledge and belief, the Owner Was Oerformed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any er for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. /

Commissions AN) 6 f77 A/

6 ti Inspector's Sig iature I

I Date

/6t/'

206'k National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRICPOWER Name P.O. Box 60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, Ml49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridoman. Ml 49106 Date 10-18-04 Sheet I

of 2 Unit 2

Component 2-FW-132-3 JOBORDER No. 03351050-01. 07.08 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

FEEDWATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 32-3 FILLER NIA M&E 30-045392 N/A ER-70S-2 N/A REPAIRED NO MATERIAL ASP 28942

7.

Description of Work WELD REPAIR THE CHECK FLAPPER TO ALLOW CONTACT WITH BODY

8.

TestConducted: Hydrostatic Pneumatic ElNominalOperatingPressureF]

Other E Pressure N/A psi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03351050-01,07,08

9. Remarks:_

Applicable Manufacturer's Data Reports -to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed Dewavne mons Owner or Owner's Designee, 1 Maintenance Welding Supervisor Date 75-VC. /3.

.20 447 I

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS have nspected the components described in this Owner's Report during the period to

/4c1/o;A

, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xl..

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

./7 emissions AWqY I/i' 607,7~ -

Inspector's Signarfre

/ '

Date

/ok/ 2-20 0 i!

National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Date 10-14-04 Sheet I of 2 Unit 2

Component 2-FW-138-3 JOB ORDER No. R0214393-01 Name One Cook Place, Bridgman. MI 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department

-Name One Cook Place. B-ddman. Ml 49106 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

FEEDWATER SYSTEM ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 19B3 Ed. NIA Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, P0)

(Yes or No) 2-FW-138-3 DISC N/A M&E 30-034386 N/A ASME SA675 NIA REPLACED NO ASP 28251 GR70

7.

Description of Work REPLACED DISC

8.

Test Conducted: Hydrostatic FLPneumatic L Nominal Operating Pressure L Other E__

Pressure N/A psi. Test Temp.

N/A F

INI

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile R0214393-01

9. Remarks:_ Ref: PMI-5075 Section 4.20.3 for the deletion of the VT-2 Applicable Manufacturer's Data Reports to be attached I-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date NIA Signed wane m

s Owner or Owner's Designee,'

Maintenance WAldina Su1erinorAqr Date ____

_.20 05

......._....,, _._...M _w_.,._.

CERTIFICATE OF INSERVICE INSPECTION.

1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province.of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS have)nspected the components described In this Owner's Report during the period 1

to

/QOI and state that to the best of my knowledge and belief, the Owner h6s performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Department' Name One Cook Place, Bridgman, MI 49106 Date Sheet 1 10-17-04 of 2 Unit 2

Component 2-FW-138-3 JOB ORDER No. C0092923-04 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp NjA Authorzation No.

N/A Expiration Date NIA Address

4.

Identification of System:

FEEDWATER SYSTEM IS( CLASS 2

5. (a) Applicable Const. Code ANSI 831.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-FW-1 38-3 LUG-N/A M&E 30-153150 NIA ASTM A36 N/A REPLACED NO MATERIAL ASP 23052 1990

7.

Description of Work INSTALLED ANTI ROTATION LUGS

8.

Test Conducted: Hydrostatic Pneumatic RNominalOperatingPressure LI Other C

MT Pressure N/A psi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File C0092923-04

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date - N/A Signed V2.

Timmons Owner or Owner's Designee, 1 Maintenance Weldina Suoervisor Date /410V Ah')

.20 Z~f CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS have in pected the components descnbed in this Owner's Report during the period

/e5//O se to

/c and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correrive measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any an er for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions /g9f?9 wk/3aI dZC inspectors Sigtur Date

/ / 204L NUtional Board, State, Province, and Endorsements f

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address

3.

Work Performed by AEP/D.C. COOK MainL Department Name One Cook Place. Bridgman, MI 49106 Date 10-27-04 Sheet I of 2 Unit 2

Component 2-GBD-S563-U JOB ORDER No. R0101350-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A 4.

5.

6.

Address Identification of System:

GENERATOR BLOWDOWN ISI CLASS 2 (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturor Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-GBD-S563-U SNUBBER GRINNELL M&E # 30-024682 N/A N/A N/A Replacement NO ASP # 26349 SEAL KIT GRINNELL M&E # 30-025055 N/A N/A N/A Replacement NO ASP-23443 "A" SEAL KIT GRINNELL M&E# 30-040590 N/A N/A N/A Replacement NO ASP-21030

7.

Description of Work REPLACED SNUBBER

8.

Test Conducted: Hydrostatic M

Pneumatic LNominalOperatingPressure LI Other R3 VT-3 Pressure N/A Dsl.

Test Temp.

N/A F

INIT.

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File R0101350-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certfy that the statements made in the report are correct and this REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp N/A Certificate of Authorization No:/

N/A Expiration Date N/A Signed vimmons Owner or Owner's Designee, 1 Maintenance Weldina Supervisor Date //i/

//

,20 6e' CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS havesinspected the components described in this Owner's Report during the period G//A4/°09 to --

_I e

, and state that to the.best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neitherthe Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in ay manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection /1 X

I B/i' Commissijd 6*r 7'

.. rv

/I/i 5tr974 Inspectdis Sd Date

/3. /Li/ 2L0 National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne, IN 46801 Address Date 10-30-04 Sheet 1 of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT.

Name One Cook Place. Bridaman. MI 49106 Unit 2

Component 2-GRC-R-574 JOB ORDER No. 04288060-03 Repair Org. P.O. No., Job No., etc Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA

4.

Identification of System:

REACTOR COOLANT ISI CLASS 1

5. (a) Applicable Const. Code ANSI 631.1 1983 Ed. NIA Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes

___or N o) 2-GRC-R-574

7.

Description of Work REWORK SUPPORT TO CORRECT BEARING

8.

Test Conducted: Hydrostatic []Pneumatic []Nominal Operating Pressure []

Other Li VT-3 Pressure N/A osi. Test Temp.

N/A F

/1 IN)T

Page 2 of FORM NIS-2 (Back)

Job Order/File 04288060-03

9. Remarks:

SUPPORT WAS ADJUSTED TO CORRECT GAP.

NO PARTS REPLACED Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed De eTimmons

. Owner or Owner's Designee, 1 MniiAtprinrec Wpldinn -1ti'n~rm'snr Date A/'

SC 20 61K CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have ingpecied the components described in this Owner's Report during the period Ah 9C to

/_.1/B//@12 d

and state that to the best of my knowledge and belief, the Owner h1as performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and rrective measures described In this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable 1 in anner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection

/

I/K/commissions______________________

inspectoes S-nare National Board, State, Pro nce, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 2.

Address Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Date 11-03-04 Sheet 1

of 3 Unit 2

Component 2-GRC-S537 JOB ORDER No. R0226292-01

3.

4.

5.

6.

Address Repair Org. P.O. No., Job No., etc Work Performed by AEPID.C. COOK Maint. Department Type Code Symbol Stamp N/A Name Authorization No.

N/A One Cook Place, Bridgman. Ml 49106 Expiration Date N/A Address Identification of System:

REACTOR COOLANT SYSTEM ISI CLASS 1 (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. NIA Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda Identification of Components Repaired or Replaced and Replacement Components Name of Name of/'

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stampe ASP, PO) d (Yes or No) 2-GRC-S537 SNUBBER GRINNELL M&E 30-024681 N/A N/A N/A Replacement NO ASP # 28228 SEAL KIT GRINNELL M&E 30-025055 N/A N/A N/A Replacement NO ASP 16630 UA" SEAL KIT GRINNELL M&E 30-040590 N/A N/A N/A Replacement NO ASP 28096 CONFIG H KIT GRINNELL M&E 30-040550 N/A N/A N/A Replacement NO ASP 26117 7.

8.

Description of Work REPLACED SNUBBER AND BRACKET/BOLTING Test Conducted: Hydrostatic [II Pneumatic ML NominalOperatingPressure 1L Other RI VT-3 Pressure N/A Psi. Test Temp.

N/A F

INIT y

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne, IN 46801 Date 11-03-04 Sheet 2

of 3 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address Unit 2

Component 2-GRC-S537 JOB ORDER No. R0226292-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridgman, Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

REACTOR COOLANT SYSTEM ISI CLASS I

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. N/A Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of/'

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stampe ASP, PO) d (Yes or No) 2-GRC-S537 SNUBBER GRINNELL M&E 30-024681 N/A N/A N/A Replacement NO ASP # 28228.

BOLTING GRINNELL M&E 30-046921 N/A ASTM A307 N/A Replacement NO HARDWARE ASP # 29600 GRA BRACKET GRINNELL M&E 00-038314 N/A N/A N/A Replacement NO ASP # 29624 7.'

Description of Work REPLACED SNUBBERAND BRACKET BOLTING

8.

Test Conducted: Hydrostatic FiPneumatic n

NominalOperatinglPressure Eli Other Fx] VT-3 Pressure N/A psi. Test Temp.

N/A F

9/

INI1~.

Page V9 of a FORM NIS-2 (Back)

Job OrderlFile R0226292-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this.

rules of the ASME Code,Section XI.

REPLACEMENT conforms to the repair or replacement Type Code Symbol Stamp N/A I

Certificate of Authorization No.

N/A Expiration Date N/A Signed ewavn Timmo s /

Owner or Owner's Designee, Maintenance Weldina Supervisor Date J.PiD. i

,i

, 20 K

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS I

have inspected the components:described In this Owner's Report during the period g-/_t/ Z to

/- /

--,and state that to the best of my knowledge and belief, the Owner has 6erformed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corfuctive measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in ai Manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Al Date

___a_0

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-29-04 Sheet 1

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, MI 49106 Unit 2

Component 2-GRC-S564 JOB ORDER No. R0012538-01 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridgman, Ml 49106 Address

4.

Identification of System:

REACTOR COOLANT SYSTEM Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A ISICLASS 1

5. (a) Applicable Const. Code ANSI 831.1 1983 Ed. N/A Add. N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of/

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stampe ASP, PO) d (Yes or No) 2-GRC-S564 SNUBBER GRINNELL M&E 30-024681 N/A N/A N/A

,Replacement NO ASP # 29340 SEAL KIT GRINNELL M&E 30-025055 N/A N/A N/A Replacement NO ASP-17001 "A' SEAL KIT GRINNELL M&E 30-040590 N/A N/A N/A Replacement NO ASP-21030

7.

Description of Work REPLACED SNUBBER

8.

Test Conducted: Hydrostatic FlPneumatic FINominalOperatingPressure Other Fx] VT-3 Pressure N/A Psi. Test Temp.

N/A F

"-.17 1 i

,- V I N F V~

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File R0012538-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this rules of the ASME Code, Section Xi.

REPLA CEMENT conforms to the repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.

NIA Expiration Date N/A Signed Dd avnemmons /

Owner or Owvner's Designee, Maintenance Welding Supervisor Date

.j 3:,:,

,20 Os/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have inspected the components described In this Owner's Report during the period AV'97 Ass c to _

/

X and state that to the best of my knowledge and belief, the Ovhner/has performed examinations And f6ken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhis employer shall be liable in an manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. (/

C :

i&(

,.-,.Ag4+7zJ@.

Commissions /'r@2a ////.5TV$7'-

Inspector's Sidwalr<

Date.

1 20 elce National B6ard, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cnnk Place, Rridaman. Ml 49106 Date 11-03-04 Sheet 1

of 2 Unit 2

Component 2-GRC-S566 JOB ORDER No. R0014603-01 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Type Code Symbol Stamp NIA Name Authorization No.

NIA One Cook Place, Bridgman, Ml 49106 Expiration Date N/A Address

4.

Identification of System:

REACTOR COOLANT SYSTEM ISI CLASS I 5.-(6)-A-pplic-ableConst.-C6-de-ANSI B31. :-1983-Ed-N/A-Add :-NIA Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stampe ASP, P0) d (Yes or No) 2-GRC-S566 SNUBBER GRINNELL M&E 30-024681 N/A N/A N/A

Replacement NO ASP # 28228 SEAL KIT GRINNELL M&E 30-025055 NIA N/A N/A Replacement NO ASP 17001 "A" SEAL KIT GRINNELL M&E 30-040590 N/A N/A N/A Replacement NO ASP 28096 CONFIG "A" KIT GRINNELL M&E 30-040550 N/A N/A N/A Replacement NO ASP 26117

7.

Description of Work REPLACED SNUBBER

8.

TestConducted: Hydrostatic n

Pneumatic LI NominalOperatingPressure LI Other i

VT-3 Pressure N/A psi. Test Temp.

N/A F

INIf Y

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File R0014603-01

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this.

rules of the ASME Code, Section Xi.

REPLA CEMENT conforms to the repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.

N/A Expiration Date N/A Signed Dewavn immo s /

Owner or Owner's Designee, 1 Maintenance Weldino Suoervisor Date___ /___ _

20 __

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS have inspected the components described in this Owner's Report during the period

/t/e;/z 4

to

'4// t

.cZ and state that to the best of my knowledge and belief, the Owner'has performed examinations arid taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhis employer shall be liable in any b fher for any personal Injury or property damage ora loss of any kind arising from or connected with this inspection 7

Commissions 716 4? y

/21/

/

C Inspector's Sighature/

)

Date /z 20 4

National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman. Ml 49106 Date 7-10-03 Sheet I

of 2 Unit 2

Component 2-GRH-RB10 JOB ORDER No. 02127061-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date.

N/A Address

3.

Work Performed by AEPID.C. COOK MainL Department Name One Cook Place. Bridaman. MI 49106 Address

4.

Identification of System:

RESIDUAL HEAT REMOVAL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-GRH-R810 2x2x1 /4w N/A M&E 30-153012 N/A ASTM A36 N/A REPLACED NO ANGLE ASP 25383 1990 3x3x1/4 N/A M&E 30-150169 N/A ASTM A500 N/A REPLACED NO TUBE STEEL ASP 22500 1990 5x5xl/2" N/A M&E 30-153193 N/A ASTM A36 N/A REPLACED NO PLATE ASP 24581 1990 4x4x114" NIA M&E 30-153269 N/A ASTM A500 N/A REPLACED NO TUBE STEEL ASP 22141 1990 Y/2x3x7' N/A M&E 30-153251 N/A ASTM A36 N/A REPLACED NO PLATE ASP 15485 1990

7.

Description of Work REPLACED SUPPORT

8.

Test Conducted: Hydrostatic DPneumatic n NominalOperatingPressure M

Other [1 PT. MT. VT-3 Pressure NIA osi. TestTemp.

N/A F

77 INr 2.

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 02127061-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date NIA Signed De mns Owner or Owner's Designee, Maintenance Weldina Supervisor Date c7 ~ /

_20____

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued bythe National Board of Bollerand Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

-have nspected te components described in this Owner's Report during the period Co/fTG:a to

-i

. and state that to the best of my knowledge and belief, the Owner has performed examinations an6 taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any mann for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

A } >

Date a1C. -3 20

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. Ml 49106 Date 11-18-04 Sheet 1

of 2 Unit 2

Component 2-GRH-R-817 JOB ORDER No. 04289031-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp NIA Authorization No.

N/A Expiration Date N/A 4.

5.

6.

Address Identification of System:

RESIDUAL HEAT REMOVAL ISI CLASS 2 (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-GRH-R-817 3/ HILTrBOLTS N/A M&E 30-046279 N/A N/A N/A REPLACED NO ASP 22430 3" C-CHANNEL N/A M&E 30-153105 N/A ASTM A36 N/A REPLACED NO ASP 27448 1990 2" NUT N/A M&E 30-211860 N/A ASME SA194 N/A

-REPLACED NO ASP 27689 GR2H 3wx N4/

NA M&E 30-153129 N/A ASTM A36 N/A REPLACED NO FLAT BAR ASP 24535 1990 6Mx 1/2" N/A M&E 30-153149 N/A ASTM A36 N/A REPLACED NO FLAT BAR ASP 23198 1990 Y THREADED N/A M&E 30-211590 N/A ASME SA193 N/A REPLACED NO ROD ASP 27689 GR B7 7.

8.

Description of Work REPLACED PIPE SUPPORT Test Conducted: Hydrostatic R Pneumatic R NominalOperatingPressure R Other L]

MT Pressure N/A si. Test Temp.

N/A F

_/ A

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File'04289031-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed _

Owner or dwner's Designee,1 Maintenance Welding Sunervisor Date 0)f3d pi

.20 /*

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON.EXAS hane irspected the components described In this Owner's Report during the period _

_ _ _to

/t>3>/6St and state that to the best of my knowledge and belief, the Owner has performed examinationsland taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corr9 e measures described in this Owners Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any, a erfor any personal injuryorpropertydamage ora loss of any kind arising from or connected with this inspection.

AOD

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, MI 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridgman. MI 49106 Date 10-14-04 Sheet 1 of 2 Unit 2

Component 2-ICM-321 JOB ORDER No. 02038052-03 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A Address

4.

Identification of System:

RESIDUAL HEAT REMOVAL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed, N/A Add. Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ICM-321 VALVE NIA M&E 30-043782 N/A ASME SA182 N/A REPLACED NO BONNETT ASP 27872 F316 STELLITE 6

7.

Description of Work REPLACED VALVE BONNETT

8.

Test Conducted: Hydrostatic Pneumatic Li Nominal Operating Pressure i Other LI VT-2 Pressure N/A osi. Test Temp.

N/A F

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 02038052-03

9. Remarks: REF: ESAT # 04344050. VT-2 CANNOT BE PERFORMED UNTIL QUARTERLY RHR PUMP RUN.

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date NIA Signed Dew ainte nance Welding Supervisor Owner or Owner's Designee, Title Date, Cr, LZ 7

.20 05 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michiqan and employed by ABS GROUP INC.

of HOUSTON. TEXAS i

/

hav6ginpected the components described in this Owner's Report during the period

/-//

/t-to.

. and state that to the best of my knowledge and belief, the Owne( has performed examinations ahd faken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in anymanner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspectio jI Commissions

)Uaw.IP A

-d/71,"Ti

/0 C9,

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Date 10-15-04 Sheet 1 of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridcqman. MI 49106 Unit 2

Component 2-ICM-321 JOB ORDER No. 02220023-06 Repair Org. P.O. No., Job No., etc Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address Type Code Symbol Stamp NIA Authorization No.

NIA Expiration Date N/A

4.

Identification of System:

RESIDUAL HEAT REMOVALI Si CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed, NIA Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ICM-321 1/8" N/A M&E 30-045045 N/A ER 309 N/A REPAIRED NO WELD FILLER ASP 28338,.

MATERIAL

. l I ________________

.L J. _______

.1 ________________

.L

7.

Description of Work TACK WELDED BONNET

8.

Test Conducted: Hydrostatic F]Pneumatic nominalOperatingPressure Other Cl VT-WELD ONLY Pressure N/A oSi. Test TerTip.

NIA F

(c3 lAlT.7l

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 02220023-06

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed Da4wayodimmons Owner or Owner's Designee, 1 Date

/

3-20 v

Maintenance Weldino Sunervisor CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued bythe National Board of Boilerand Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have jnspected the components described in this Owner's Report during the period

/4//

'.-t to ______4_____

, and state that to the best of my knowledge and belief, the Owner has'performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

A Cs

/

it

, At~L6,Jr0 Commissions AI&Nr /~s s Inspectors Signature 'l National Board, State, Province, and Endorsements Date

_0o

/ ozl

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, Ml 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. Ml 49106 Date 10-27-04 Sheet I of 2 Unit 2

Component 2-ILA-121-VI JOB ORDER No. 04276008-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

EMERGENCY CORE COOLING SYSTEM ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

IdentIfication of Components Repalred or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ILA-121 -Vl VALVE CONVAL M&E 30-035209 N/A ASME SAI 82 N/A REPLACED NO ASP 14314 GR F316 2" PIPE N/A M&E 30-016711 ASME SA312 N/A REPLACED NO ASP 25312 TP304 2"X 1" INSERT N/A M&E 30-017027 ASME SA182 N/A REPLACED NO ASP 498 GR 304

7.

Description of Work REPLACED VALVE, PIPE AND INSERT

.8.

Test Conducted: Hydrostatic []Pneumatic []Nominal Operating Pressure il Other LI PT, VT-2 Pressure N/A psl. Test Temp.

N/A F

/ c)5; INIT

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 04276008-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached

-I-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE conforms to the rules of the Certificate of Authorization No.

NIA Expiration Date NIA Signed Dewavne T mans Owner or Owner's Designee, 1 Ds Date;:-:~r 20 >

Maintenance Weldina Sunervisor CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have inspepted the components described in this Owners Report during the period ________to _____

. and state that to the best of my knowledge and belief, the Owner has 06rfommed examinations and tadhi cdrrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any ma r for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

I/7

IQ0,

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint Department Name One Cook Place. Bridaman. MI 49106 Date 11-02-04 Sheet I of 2 Unit 2

Component 2-ILA-202 JOB ORDER No. 03316029-08 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp NIA Authorization No.

NIA Expiration Date N/A 4.

5.

6.

Address Identification of System:

CONTAINMENT SPRAY ISI CLASS 2 (a) Applicable Const. Code ANSI B31.1 1983 Ed, N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturei Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-ILA-202 5/8" BOLTS N/A M&E 30-04729 N/A ASME SA453 N/A REPLACED NO ASP 18869 I

GR 660 5/8" NUTS N/A M&E 30-212090 N/A ASME SA194 N/A REPLACED NO ASP 28340 D

GR 8F

7.

Description of Work REPLACED BOLTING

8.

Test Conducted: Hydrostatic D]Pneumatic l Nominal Operating Pressure aI Other C]

Pressure N/A Psi. Test Temp.

N/A F

1/7 INI iI

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03316029-08

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NOQIE Certificate of Authorization No.

N/A Expiration Date NIA conforms to the rules of the Signed imm ns Owner or Owner's Designee,'

Maintenance Welding Supervisor Date,-d ff.=

20 Of-CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS haye rlspected the components described in this Owner's Report during the period ________ __ _______

to

//

t

, and state that to the best of my knowledge and belief, the Owner has performed examinations and (aken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shal be liable in any7/7 er for any personal injury or property damage or a loss of any kind arising from or connected with thisinspection.,.c//

/

)mmissions 6J93 q 77 M/

n 3677y National Board, State, Provihce, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne. IN 46801 Date 11-03-04 Sheet 1 of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridgman, Ml 49106 Address Unit 2

Component 2-IMO-390 JOB ORDER No. 04307059-01.02 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint Department Name One Cook Place. Bridgman. MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A ISI CLASS 2

4.

Identification of System:

RESIDUAL HEAT REMOVAL

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-IMO-390 VALVE VOGT M&E 30-044238 N/A ASME SA182 N/A REPLACED NO ASP 14038 GR F316 2' X 1" INSERT N/A M&E 30-017027 N/A ASME SA182 N/A REPLACED NO ASP 597 GR304 2" SOCK-O-LET N/A M&E 30-017099 N/A ASME SAI 82 N/A REPLACED NO ASP 12852 GR F304 1" PIPE N/A M&E 30-016729 N/A ASME SA312 N/A REPLACED NO ASP 27009 GRTP304

7.

DescripUon of Work ADDED VENT LINE TO RHR SYSTEM

8.

TestConducted: Hydrostatic FPneumatic FNominalOperatingPressureF-1 Other El PT. VT-2 Pressure N/A psi. TestTemp.

N/A F

/67!

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 04307059-01, 02 Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed

-Owner or Owner's Designee, 1 Mai~npnane Wp~ldinn Sunprylnr Date.Z/"

20 05 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michiqan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have)nspected the components described in this Owner's Report during the period

,//0/Jto

'°

-_____.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orImplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, nertherthe Inspectornorhisemployer shall be liable in any Atgner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. J/I/A

/

'ommissions d4 2V171

/)1/ 56?ig7_q National Board, State, Province, and Endorsements

//D

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Denartment Name One Cook Place, Bridgman. Ml 49106 Date 10-17-04 Sheet I

of 2 Unit 2

Cornponent 2-IRV-310 JOB ORDER No. 03339023-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

RESIDUAL HEAT REMOVAL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. NIA Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-IRV-31 0 VALVE N/A M&E 00-036753 N/A ASME SA351 N/A REPLACED NO ASP 29382 GR CF8M

7.

Description of Work -REPLACED VALVE

8.

Test Conducted: Hydrostatic jO Pneumatic []Nominal Operating Pressure 2

Other L VT-2 Pressure N/A psi. Test Temp.

N/A F

111/

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03339023-01

9. Remarks:

_REF: PO # 000031389 Applicable Manufacturer's Data Reports to be attached 1

CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xi.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date NIA Signed e

im Owner or Owner's Designee, 1 Maintenance Welding Supervisor Date _

20 1'6 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS I

_ have In, pected the components described In this Owner's Report during the period 4C/

Z/; 'a to

//

M

. and state that to the best of my knowledge and belief, the Owner has p6rformed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owner's Report. Furthermore, netherthe Inspectornorhisemployer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions 0/36oyli MY/ Scat F47j-Inspectors Pignadre[/-ejf)

Date 0

L4L20 National Board, State, Province, and Endorsements 1/2

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-17-04 Sheet 1

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman, Ml 49106 Unit 2

Component 2-IRV-311 JOB ORDER No. 03339023-05 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address Type Code Symbol Stamp NIA Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

RESIDUAL HEAT REMOVAL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-IRV-31 1 VALVE N/A M&E 00-036754 NIA ASME SA351 N/A REPLACED NO ASP 29382 GR CF8M

7.

Description of Work REPLACED VALVE

8.

Test Conducted: Hydrostatic FPneumatic n NominalOperatingPressure F3 Other LI VT-2 Pressure N/A psi. Test Temp.

N/A F

/13 INIT

/Ar1

Page 2 of 2 FORM NI8-2 (Back)

Job Order/File 03339023-05

9. Remarks:

_REF: PO # 000031389 Applicable Manufacturer's Data Reports to be attached I -

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed ue~w aI ms Owner or Owner's Designee, 1 Malntenance Weldinq Supervisor Date

._20 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have irsp pcted the components described in this Owner's Report during the period _

_______to and state that to the best of my knowledge and belief, the Owner hes performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Ownees Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable In any ma r for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

1 om/o7

< =

/

7Commissions/d66g77 iV~/.3&Z'7

Inspector's Signa~fe'

(

Date

/.

-'0 CJ J

National Board, State, Province, and Endorsements

/HY

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 Date 10-17-04 Sheet 1

of 2

Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address Unit 2

Component 2-IRV-320 JOB ORDER No. 03339023-09 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

RESIDUAL HEAT REMOVAL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-IRV-320 VALVE N/A M&E 00-036753 N/A ASME SA351 NIA REPLACED NO ASP 29382 GR CF8M

7.

Description of Work REPLACED VALVE

8.

Test Conducted: Hydrostatic []Pneumatic [iNominalOperatingPressure 7 Other L]

VT-2 Pressure N/A psi. Test Temp.

N/A F

/15' INIT

~

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03339023-09

9. Remarks:

_REF: PO 000031389 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xi.

repar or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date NIA Signed eewar yetnmi on Malhtenance Welding Supervisor Date v20 5

Owner orlOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of -

Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS haye inspected the components described in this Owner's Report during the period _

_ ___to and state that to the best of my knowledge and belief, the Owner has performed examinations an6 taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhis employer shall be liable In any manne or any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

-)

Commissions f1 /66 z

/97/ ad d7m Inspector's Sigfe >

National Board, State, Province, and Endorsements Date 20

°J (I

Date.+/..20 oJ

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman. Ml 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Deoartment Name One Cook Place, Bridaman. Ml 49106 Date 11-2-04 Sheet I

of 2 Unit 2

Component 2-MRV-210 JOB ORDER No. R0250848-01&2 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A 4.

5.

6.

Address Identification of System:

MAIN STEAM ISI CLASS 2 (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N416-1 (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-MRV-21 0 2-3/4" STUD N/A M&E 30-034460 N/A ASME SA193 N/A REPLACED NO ASP 15263 GR B7 DISC N/A M&E 30-034382 N/A ASME SA105 N/A REPLACED NO ASP 16513 2-3/4" NUT N/A M&E 30-034422 N/A ASME SA194 N/A REPLACED NO ASP 15263 GR7 3" STEP STUD N/A M&E 30-034316 N/A ASME SA193 REPLACED NO ASP 29517 GRB7 FILLER N/A M&E 30-045392 N/A ER 70S-2 REPLACED NO MATERIAL ASP 28160 &

29426 7.

8.

Description of Work REPLACED DISC AND BOLTING. REWELDED VENT PIPING TestConducted: Hydrostaticc Pneumatic M NominalOperatingPressure F3 Other D PT, MT. RT. VT-2 Pressure N/A Psi. Test Temp.

N/A F

/17

'f j/.

INII TM, 4

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File R0250848-01

9. Remarks :_

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xi.

repair or replacement Type Code Symbol Stamp NONE CerUficate of Authorization No.

NIA Expiration Date NIA Signed Lavnruimmons Owner or Owners Designee, 1 Maintenance Welding SuDervisor Date LL3

.20 Z95 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS have ispected the components described In this Owner's Report during the period

/La2/ /D9 to

///D e/O,

, and state that to the best of my knowledge and belief, the Ownd'r has performed examinations and taker-corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any mannepr any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

A/ 7

!I' FORM NIS-2 OWNER'S REPORT FOWREPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridgman, MI 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridaman. Ml 49106 Date Sheet 1

10/13/04 I__of 2

Unit 2

Component _2-MRV-241 JOB ORDER No. 04047056-01 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

CONTAINMENT SPRAY ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-MRV-241 VALVE PLUG N/A M&E 30-688864 N/A ASTM A582 N/A REPLACED NO ASP 28198 TP416 CAGE NIA M&E 30-688865 NIA ASTM A747 N/A REPLACED NO ASP 17265 CB7CU-1 STEM N/A M&E 30-688864 N/A ASTM A484 N/A REPLACED NO ASP 28198 TP416

7.

Description of Work REPLACED PLUG/STEM ASSEMBLY AND SEAT

8.

TestConducted: Hydrostatic LIPneumatic nNominalOperatingPressure

[

Other E Pressure N/A psi. Test Temp.

N/A F

INlT:OI.

Page 2 of 2 FORM NIS-2 (Back)

Job Order/Flie 04047056-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A Signed ons Owner or Owner's Designee, 1 Maintenance Welding SuperVisor Date 2Qe. 7 20 04 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

. i h ha e inspected the components described in this Owner's Report during the period 4//X7 ED to 6

and state that to the best of my knowledge and belief, the Owner4fas pderformned examinations addtAken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable In any ranner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection X/

Commissions/t-9/77 Inspectors tig' I

t Date

/ 6 e0 National Board, State, Province, and Endorsements

/91)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Date 10-21-04 Sheet I of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, MI 49106 Address Unit 2

Component 2-MS-135-1 JOB ORDER No. 04277047-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridaman, MI 49106 Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

STEAM GENERATOR CONDENSATE ISI CLASS 2

5. (a) Applicable Const. Code ANSI 631.1 1983 Ed. NIA Add. Code Case N416-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-MS 135-1 VALVE N/A M&E 30-044248 N/A ASME SA105 N/A REPLACED NO ASP 19582 PIPE N/A M&E 30-014981 N/A ASME SA106 N/A REPLACED NO ASP 25237 GR B

7.

Description of Work REPLACED VALVE AND PIPING

8.

Test Conducted: Hydrostatic FII Pneumatic [iNominal Operating Pressure m

Other C]

PT. VT-2 Pressure N/A psi. Test Temp.

N/A F

~I INIT

/)5

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile 04277047-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONJE Certificate of Authorization No.

N/A Expiration Date N/A conforms to the mrles of the Signed 156wavne Timmons Owner or 6wner's Designee, 1 Date.)62

/

.C20 C Maintenance Weldina Supervisor CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

A.,

have prsps cted the components described in this Owners Report during the period

/.

/7 /O~L to 7/13 C

. and state that to the best of my knowledge and belief, the Owner has fierf'ormred examinations and taken corrective measures described in this Owners Report In accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neitherthe Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any marrir for any personal Injuryor property damage or a loss of any kind arising from or connected with this inspection.

T ins

/J2377

/2a/ 8e16

-'l7

( -

Inspector's Signature V

Date -

0 Co-National Board, State, Province, and Endorsements I A 9

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-05-04 Sheet 1 of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman, Ml 49106 Address Unit 2

Component 2-OME 3-1 JOB ORDER No. 04090049-03 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Degartment Name One Cook Place. Bridaman. MI 49106 Address Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A

4.

Identification of System:

MAIN STEAM ISI CLASS 2

5. (a) Applicable Const Code ASME III CLASS I NB 1989 Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-OME 3-1 BOLTING N/A M&E 30-009778 N/A ASMESA193 N/A REPLACED NO ASP 23749 GR B7 MANWAY N/A M&E 30-009785 N/A ASME SA 516 N/A REPLACED NO COVER ASP 24577 GR 70

7.

Description of Work REPLACED BOLTING AND MANWAY COVER

8.

Test Conducted: Hydrostatic F Pneumatic [lNominalOperatingPressure M3 Other n VT-1. VT-2 Pressure N/A osi. Test Temp.

N/A F

1 :5 INI t

4..

A-Page : of 2 FORM NIS-2 (Back)

Job Order/File 04090049-03

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I,

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xi.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed e aTimmons

-Owner or Owner's Designee, Date _________,20 ____

Maintenance Weldino Suoervisor CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued bythe National Board of Boller and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have insppcted the components described In this Owner's Report during the period 41//1 0C to

/

lI/,rcz

, and state that to the best of my knowledge and belief, the Owner hds p6rformed examinations anrd ta en corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector norhis employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any Manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

4I,

-X

/

Commissions Jp8 9&]'Z/9jJ/

t7

7r National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 Date 10-19-04 Sheet I of 2 Address

2. Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman. Ml 49106 Address Unit 2

Component 2-OME-3-4 JOB ORDER No. R0252183-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. Ml 49106 Address

4.

Identification of System: REACTOR COOLANT SYSTEM Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A ISI CLASS I

5. (a) Applicable Const Code ANSI B31.1 1983 Ed. NIA Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-OME 3-4 STUD WESTINGHOUS M&E 30-011975 N/A ASME SA193 N/A REPLACED NO E

ASP 15386 GR B7

7.

Description of Work REPLACE STUDS

8.

Test Conducted: Hydrostatic 2 Pneumatic :] NominalOperating Pressure g Other F VT-1.

Pressure N/A psi. Test Temp.

N/A F

I '-n5 INrrj.

Page 2 of FORM NI8-2 (Back)

Job Order/File R0252183-01

9. Remarks:

REF: 04029029-05 for the Requisition of the Studs.

Applicable Manufacturer's Data Reports to be attached I-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A SignedIm imm Owner or Owner's Designee, 1 Mninti-n:;nt-t-Wpldinn Ri inpryknr Date.______

.20 Of5

t.

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have insp cted the components described in this Owner's Report during the period le) /aa/ad to _

0_

__Z_

. and state that to the best of my knowledge and belief, the Owner has pIerformed examinations andAaken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Bysigning this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinations and correcvve easures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any ma n r or any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

/1 Commissions 6i7"r l

St,7/

Inspectors Signatule C

Date

/

O/

m 20h National Board,State, Province, and Endorsements I 1 to

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wavne. IN 46801 Date 10-16-04 Sheet 1

of 2 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman, MI 49106 Address Unit 2

Component-2-PP-50W-JOB ORDER No. 04276040-14 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place. Bridaman. MI 49106 Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed, N/A Add. Code Case N416-1 (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of

/

Manufacturer National Other Year

Repaired, ASME Component Manufactureir Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-PP-50W PUMP PACIFIC PUMP M&E 30-014849 N/A N/A REPLACED NO ASP 29428

7.

Description of Work REPLACED PUMP

8.

Test Conducted: Hydrostatic 1I Pneumatic FLI Nominal Operating Pressure Other E VT-2 Pressure N/A Psi. TestTemp.

N/A F

Fw INITK.

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile 04276040-14

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed mm Maintenance Welding Supervisor Date C

/ 7 20 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS havp inpected the components described in this Owners Report during the period i°/C

,4/r to

,-Z//4;/d

. and state that to the best of my knowledge and belief, the Ownier has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corUctive measures described in this Owners Report. Furthermore, neitherthe Inspector norhis employer shall be liable in any anner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

-om sk-6<7 A CommissionsX/ 6g77 At n,57; f

X, l

A Inspectors Sigriat~y6 7 t.

Date CD National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-15-04 Sheet I of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman. MI 49106 Unit 2

Component 2-PP-50W JOB ORDER No. 04276040-22 Repair Org. P.O. No., Job No., etc Address

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman. MI 49106 Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of /

Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-PP-50W 3132" N/A M&E 30-045073 N/A ER 316 N/A REPLACED NO WELD FILLER ASP 1179 MATERIAL 1/8" N/A M&E 30-045075 N/A ER 316 N/A REPLACED NO WELD FILLER ASP 19713 MATERIAL

7.

Description of Work CUT PIPE AND RE-WELDED

8.

Test Conducted: Hydrostatic FPneumatic MNominalOperatingPressure n Other F1 VT-2. PT, RT Pressure N/A psi. Test Temp.

N/A F

I '0;l q lNiT_-

'?

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile 04276040-22

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached

-I-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE conforms to the rules of the Certificate of Authorization No.

NIA Expiration Date N/A Signed anor Onermons D

Owner or Owner's Designee, Maintenance Weldina Supervisor Date

-11 i'

, 20 &'

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS

/

havye ispected the components described in this Owner's Report during the period

/l/4kf6 to

/2? /1 /dZ

, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinations and correctiv measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any ¶pain Srfor any personal injuryor property damage or a loss of any kind arising from orconnected with this inspection.

/

Commissions It434?//

//

'< 7ZC Inspectors Sigrfature /

National Board, State, Province, and Endorsements t

7 130

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address

3.

Work Performed by AEP/D.C. COOK Maint. Department

'S Name One Cook Place, Bridamman, MI 49106 Date 10-22-04 Sheet I of 4 Unit 2

Component 2-PP-50W JOB ORDER No. 04281076-01,02,03 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed, N/A Add. Code Case N-416-1 (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-PP-50W 67 PIPE FLANGE N/A M&E 30-022132 N/A ASME SA182 N/A REPLACED NO ASP 7544 GR F304 6" PIPE ELBOW N/A M&E 30-017841 N/A ASME SA 403 N/A REPLACED NO ASP 28500 GR 304 6' PIPE N/A M&E 30-016780 N/A ASME SA 376 N/A REPLACED NO ASP 15529 TP 304 6"VALVE N/A M&E 30-033965 N/A ASME SA351 N/A REPLACED NO ASP 16517 GR CF8 7.

8.

Description of Work REPLACED PIPE. FITTINGS AND BOLTING Test Conducted: Hydrostatic L Pneumatic E] Nominal Operating Pressure [x Other Ll PT. RT. VT-2 Pressure N/A psi. Test Temp.

NIA F

INIT I'll 131

/ S

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman. Ml 49106 Date 10-22-04 Sheet 2 of 4

Address

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridaman, MI 49106 Unit 2

Component 2-PP-50W JOB ORDER No. 04281076-01.02,03 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (MaterIal M&E, No.

or Replacement Stamped ASP, P0)

(Yes or No) 2-PP-50W 3/4k COLT N/A M&E 30-047136 N/A ASME SA453 N/A REPLACED NO ASP 13679 GR 660 3/40 NUT N/A M&E 30-212100 NIA ASME SA 194 N/A REPLACED NO ASP 26923 GR 8F

7.

Description of Work REPLACED PIPE, FITTINGS AND BOLTING

8.

Test Conducted: Hydrostatic Pneumatic []Nominal Operating Pressure

[M]

Other [I PT, RT. VT-2 Pressure N/A psi. Test Temp.

N/A F

INIT47 I

I{/

13>

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridgman. Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridgman. Ml 49106 Date 10-22-04 Sheet 3

of 4

Unit 2

Component 2-PP-50W JOB ORDER No. 04281076-01.02.03 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL ISI CLASS 2 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-PP-50W VALVEDISC N/A M&E 30-034029 N/A ASME SA351 N/A REPLACED NO 2-CS-269W ASP 21943 GRCF8 STEEL FLAR N/A M&E 30-153129 N/A ASTM A36 N/A REPLACED NO BAR ASP 24535 1990

7.

Description of Work REPLACED SHIM, PIPE. FITTINGS. AND BOLTING

8.

Test Conducted: Hydrostatic

[]Pneumatic OLNominalOperatinglPressure Other M RT. PT. VT-2 Pressure N/A osi. Test Temp.

N/A F

FR1 INI3 1 3 3 1/ll

Page 4 of 4 FORM NIS-2 (Back)

Job Order/File 04281076-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xi.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed Owner or Owner's Designee, '

Maintenance Welding Sunervisor Date

~ -7 20 05 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS I

have)nspqcted the components described in this Owner's Report during the period

/D) /7/) C/oc to

/

and state that to the best of my knowledge and belief, the Owner-has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any ma er for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

b

' -National Board, State, Province, and Endorsements I 3L)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address Date 10-26-04 Sheet I of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman. MI 49106 Address Unit 2

Component 2-PW-275 JOB ORDER No. 03162051-01 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place. Bridgman. Ml 49106 Address Type Code Symbol Stamp N/A Authorization No.

NIA Expiration Date N/A

4.

Identificaton of System:

PRIMARY WATER ISI CLASS 2

5. (a) Applicable Const. Code ANSI 831.1 1983 Ed. N/A Add. Code Case N-416-1 (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-PW-275 VALVE N/A M&E 30-041824 N/A ASTM A351 N/A REPLACED NO ASP 29293 GRCF8

7.

Description of Work REPLACED VALVE

8.

Test Conducted: Hydrostatic n Pneumatic L Nominal Operating Pressure

[x Other D

VT-2. PT. RT N/A Pressure N/A psi. Test Temp.

N/A F

(I35

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File 03162051-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date NIA Signed Ae Ti mons Owner or Owners Designee, 7 Maintenance Weldina Sunervisor Date 'r4'3.

.20 e CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS have ipspepted the components described in this Owner's Report during the period 4/I//C/

to __M____

. and state that to the best of my knowledge and belief, the Owner has 1performed examinations and'taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspector nor his employer shall be liable in an1iannerfor any personal injuryor property damage or a loss of any kind arising from or connected with this inspection.

A/.j Commissions #J56'77 W;~/

372 Inspector's Signatuo p Date

/,

20 0'C D3 National Board, State, Province, and Endorsements I.Y

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridaman, Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint. Department An Name One Cook Place, Bridgman, Ml 49106 Date 10-17-04 Sheet 1 of 2 Unit 2

Component 2-SV-45A JOB ORDER No. R0246683-05 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp NIA Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

REACTOR COOLANT SYSTEM ISI CLASS 1

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. NIA Add. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-SV-45A ASME SA350 CROSBY M&E 1974 REPLACED YES GR CF8M 30-036392 VALVE GASP 29383 S/N N56499 0009

7.

DescriptionofWork ReplacePressurizerSafetvValve.

8.

TestConducted: Hydrostatic FIrPneumatic L Nominal Operating Pressure Other L VT-2. VT-3 Pressure N/A psi. TestTemp.

N/A F

137 INIT~

Iv,'

Page 2 of 2 FORM NIS-2 (Back)

Job Order/File R0246683-05

9. Remarks:. VT-2 Exam was performed under JOA R246859-01 Applicable Manufacturer's Data Reports to be attached I,

CERTIFICATE OF COMPLIANCE We certify that the statements made hi the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date NIA Signed

Owner or Owner's Designee, 1 Maintenance Weldina SuPervisor Date

/4

/I

.20 Of CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued bythe National Board of Boilerand Pressure Vessel Inspectorsand the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON. TEXAS hav%,)nspected the components described in this Owner's Report during the period 7c//;L'

/e 4(

to ui/9/i cf

. and state that to the best of my knowledge and belief, the Owner has performed examinations ana taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the emminations and corrective measures described in this Ownees Report. Furthermore, neither the Inspectornorhisemployer shall be liable in any manner for any personal injuryor property damage or a loss of any kind arising from or connected with this Inspection.

Commissions IU$6477 fit/

5;3de a

S ^ v \\

^

q Inspectoes Sig Date j4 *1L 2 0 6

4 National Board, State, Province, and Endorsements I 3c6

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne. IN 46801 Address Date 10-17-04 Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridaman, Ml 49106 Unit 2

Component 2-SV-45B JOB ORDER No. R0255732-06 Address Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint. Department Name One Cook Place, Bridgman, MI 49106 Address Type Code Symbol Stamp N/A Authorizarion No.

NIA Expiration Date NIA

4.

Identification of System:

RCS ISI CLASS 1

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-SV-45B CROSBY M&E N/A 1974 REPLACED YES 30.036392 ASME SA350 VALVE ASP 29383 GR CF8M SIN

_.N56499-00-0007

7.

Description of Work Replace Pressurizer Safety Valve.

8.

Test Conducted: Hydrostatic F]Pneumatic 1 Nominal Operating Pressure Other i VT-3. VT-2 Pressure N/A psi. Test Temp.

N/A F

1 3 IN Ig iiA/

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile R0255732-06

9. Remarks:. VT-2 Exam was performed under JOA R246859-01 Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement conforms to the nrles of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed :ewa imm ns

-Owner or Owner's Designee, '

Maintenance Welding Supervisor Date 21CŽ /

.20 01' CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS I

X haveptspected the components described in this Owner's Report during the period _

_ _ to __________

.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherthe Inspectornorhisemployer shall be liable in any anner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/' X PIqD

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi

1. Owner AMERICAN ELECTRIC POWER Name P.O. Box 60 Fort Wayne, IN 46801 Address

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place, Bridgman, Ml 49106 Address

3.

Work Performed by AEPID.C. COOK Maint Degartment Name One Cook Place, Bridgman, Ml 49106 Date 10-17-04 Sheet 1

of 2 Unit 2

Component 2-SV-45C JOB ORDER No. R0255731-05 Repair Org. P.O. No., Job No., etc Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA Address

4.

Identification of System:

RCS ISI CLASS 1

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. NIA Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-SV-45C ASME SA350 CROSBY M&E 1974 REPLACED YES GR CF8M 30-036392 VALVE ASP 29383 S/N N56499 0001 1* NUT ASME SA 194 N/A M&E N/A REPLACED GR8F 30-212120 ASP 22655

7.

Description of Work Replace Pressurizer Safety Valve.

8.

Test Conducted: Hydrostatic F]Pneumatic E NominalOperatingPressure [3 Other i

VT-1. VT-3, VT-2 Pressure N/A osi. TestTemp.

N/A F

,LH lNIT-i~ve

Page 3 of 2 FORM NIS-2 (Back)

Job Order/File R0255731-05

9. Remarks:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code,Section XI.

repair or replacement conforms to the rules of the Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date N/A Signed w

mmons Owner or Owner's Designee, 1 Maintenance Weldino Suoervisor Date

. 20 0 CERTIFICATE OF INSERVICE INSPECTION I, the undersi ned, holding avalid commission issued bythe National Board of Boilerand Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS, have nsected the components described In this Owner's Report during the period 1An to 7/5//

, and state that to the best of my knowledge and belief, the Owner'bas performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, nertherthe Inspectornorhisemployer shall be liable In arqy nannerfor any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection f

)

/ q -

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl

1. Owner AMERICAN ELECTRIC POWER Date 10-20-04 Name P.O. Box 60 Fort Wayne, IN 46801 Address Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridcman, Ml 49106 Address Unit 2

Component 2-SV-51 JOB ORDER No. 04118056-01 Repair Org. P.O. No., Job No., etc

3. Work Performed by AEPID.C. COOK Maint. Department Name One Cook Place, Bridaman. MI 49106 Address

4.

Identification of System:

CHEMICAL VOLUMN AND CONTROL Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date NIA ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped AsP, PO)

(Yes o r N o) 2-SV-51 VALVE N/A.

M&E 30-036382 N/A ASME SA351 N/A REPLACED NO ASP 14812 GR CF8M 5/8W STUD N/A M&E 30-212290 N/A ASME SA453, N/A REPLACED NO MATERIAL ASP 28452 GR 660 CLB 5/8" NUT N/A M&E 30-212090 -

N/A ASME SA194 N/A REPLACED NO ASP 28983 GR8F

7.

Description of Work REPLACED VALVE AND BOLTING

8.

Test Conducted: Hydrostatic [2 Pneumatic R Nominal Operating Pressure FI Other F VT-2 Pressure N/A psi. Test Temp.

N/A F

I q3 17 I Ivrit, I.,

Page 2 of 2 FORM NIS-2 (Back)

Job OrderlFile 04118056-01

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT conforms to the rules of the ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

N/A Expiration Date NIA Signed mons Owner or Owner's Designee, 1 Maintenance Weldinq Supervisor Date-JŽli, 20 05 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS haye inspected the components described In this Owner's Report during the period to _

Vz/ (Z and state that to the best of my knowledge and belief, the Ownev/ha performed examinationeand Saken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correctiv neasures described In this Owner's Report. Furthermore, neitherthe Inspectornorhis employer shall be liable in any ma9Ke foanyny personal injury or property damagor r a loss of any kind arising from or connected with this inspection.

I rommissionsI 6.17,71t Ah a ge I'

vlW8ffiloov&o, w at.,,

,., Y Inspector's Signature' V

Date Od 4

(-I National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1.

Owner AMERICAN ELECTRIC POWER Name P.O. Box60 Fort Wayne. IN 46801 Address Date 10-22-04 Sheet I

of 2

2.

Plant D.C. COOK NUCLEAR POWER PLANT Name One Cook Place. Bridgman. MI 49106 Address Unit 2

Component 2-TK-86 JOB ORDER No. R0230508-03 Repair Org. P.O. No., Job No., etc

3.

Work Performed by AEP/D.C. COOK Maint Department Name One Cook Place. Bridaman: Ml 49106 Address

4.

Identification of System:

RESIDUAL HEAT REMOVAL Type Code Symbol Stamp N/A Authorization No.

N/A Expiration Date N/A ISI CLASS 2

5. (a) Applicable Const. Code ANSI B31.1 1983 Ed. N/A Add. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989. No Addenda

6.

Identification of Components Repaired or Replaced and Replacement Components Name of Name of Manufacturer National Other Year

Repaired, ASME Component Manufacturer Serial No.

Board Identification Built

Replaced, Code (Material M&E, No.

or Replacement Stamped ASP, PO)

(Yes or No) 2-TK-86 STUDS N/A M&E 30-049301 N/A ASME SA193 N/A REPLACED NO ASP 29005 GR B7 NUTS N/A M&E 30-211880 N/A ASME SA194 N/A REPLACED NO ASP 28821 GR 2H WASHERS N/A M&E 30-212690 N/A ASTM F436-93 N/A REPLACED NO ASP 26932

7.

DescripUon of Work REPLACED MANWAY BOLTING

8.

Test Conducted: Hydrostatic L Pneumatic El Nominal Operating Pressure Other Pressure NIA osi. Test Temp.

NIA F

/Lq LI INlT~

Page 2 of 2 FARM NIS-2 (Back)

Job Order/File R0230508-03

9. Remarks:_

Applicable Manufacturer's Data Reports to be attached I

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR & REPLACEMENT ASME Code, Section Xl.

repair or replacement Type Code Symbol Stamp NONE Certificate of Authorization No.

NIA Expiration Date N/A conforms to the rules of the Signed ew aT m

owner or Owner's Designee, 1 Maintenance Weldina Suoervisor Date 3 ace, /7,

.20 cOs CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued bythe National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Michigan and employed by ABS GROUP INC.

of HOUSTON, TEXAS haveAnspected the components described in this Owner's Report during the period I V/64d SL to.

@/../o.

and state that to the best of my knowledge and belief, the Owner has performed examinations a rd taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes anywarranty, expressed orimplied, concerning the examinations and correcti# measures described in this Owner's Report. Furthermore,neitherthe Inspectornorhisemployer shall be liable in any ma(nf rfor any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

, A/ 7 I14(c

.s

ML050390357

Text

SUMMARY

Attachment:

SUMMARY

SUMMARY

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

System Description

References:

References:

References:

Navigation menu

Search