ML082270515
ML082270515 | |
Person / Time | |
---|---|
Site: | Nine Mile Point ![]() |
Issue date: | 08/14/2008 |
From: | Polson K Constellation Energy Group, Nine Mile Point |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
Download: ML082270515 (17) | |
Text
Keith J. Polson P.O. Box 63 Vice President-Nine Mile Point Lycoming, New York 13093 315.349.5200 315.349.1321 Fax
/\
0 Constellation Energy.
-, ..'
- NineMilePoint Nuclear Station August 14, 2008 U. S. Nuclear Regulatory Commission Washington, DC 20555-0001 ATTENTION: Document Control Desk
SUBJECT:
Nine Mile Point Nuclear Station Unit No.2; Docket No . 50-410 License No. NPF-69 Application for Technical Specification Change Regarding Revision of Control Rod Notch Surveillance Test Frequency and a Clarification of a Frequency Example Using the Consolidated Line Item Improvement Process In accordance with the provis ions of 10 CFR 50.90, Nine Mile Point Nuclear Station, LLC (NMPNS) is submitting a request for an amendment to the Technical Specifications (TS) for Nine Mile Point Unit 2 (NMP2).
The proposed amendment would: (1) revise the TS surveillance requirement (SR) frequency in TS 3.1.3, "Control Rod OPERABILITY," and (2) revise Example 1.4-3 in TS 1.4, "Frequency" to clarify the applicability of the 1.25 surveillance test interval extension.
Attachment 1 provides a descript ion of the proposed change, the requested confirmation of applicability, and plant-specific verifications. Attachment 2 provides the existing TS pages marked-up to show the proposed changes. Associated TS Bases changes are marked-up in Attachment 3. The TS Bases changes are provided for information only and will be processed in accordance with the NMP2 TS 5.5.10, "Technical Specifications (TS) Bases Control Program." Attachment 4 provides a summary of the regulatory commitments made in this submittaL NMPNS requests approval of the proposed License Amendment by February 16, 2009, with the amendment being implementation within 60 days of approval of the amendment.
In accordance with 10 CFR 50.91, NMPNS has provided a copy of this license amendment request, with attachments, to the appropriate state representative.
Document Control Desk August 14, 2008 Page 2 Should you have any questions regarding the information in this submittal, please contact T. F. Syrell, Licensing Director, at (315) 349-5219.
Very truly yours,
~~
STATE OF NEW YORK TO WIT:
COUNTY OF OSWEGO I, Keith J. Polson, being duly sworn, state that I am Vice President-Nine Mile Point, and that I am duly authorized to execute and file this request on behalf of Nine Mile Point Nuclear Station, LLC. To the best of my knowledge and belief, the statements contained in this document are true and correct. To the extent that these statements are not based on my personal knowledge, they are based upon information provided by other Nine Mile Point employees and/or consultants. Such information has been reviewed in accordance with company practice and I believe it to be reliable.
Subscribed and sworn before me, a Notary Public in and for the State of New York and County of Oswego, this l<<.f~ day of OJ....% -*; 2008 .
WITNESS my Hand and Notarial Seal:
-- Notary Public My Commission Expires:
SANDRA A. OSWALD Notary Public. State of New York
_ _--'-I().:.....,~--,---O,, _ No. 010S6032276 Qualified in Oswego Ctl!nty~
Date Commission Expires 16 << S'd) ct KJP/GB/
Attachments: 1. Description and Assessment
- 2. Proposed Technical Specification Changes (Marked-Up Pages)
- 3. Proposed Technical Specifications Bases Changes (Marked-Up Pages)
- 4. Summary of Regulatory Commitments made in this Submittal
Document Control Desk August 14, 2008 Page 3 cc: S. J. Collins, NRC Regional Administrator, Region I R. V. Guzman, Jr., NRC Project Manager E. C. Knutson, Senior NRC Resident Inspector J. P. Spath, NYSERDA
ATTACHMENT 1 DESCRIPTION AND ASSESSMENT TABLE OF CONTENTS
1.0 DESCRIPTION
2.0 ASSESSMENT 2.1 Applicability of Published Safety Evaluation 2.2 Optional Changes and Variations
3.0 REGULATORY ANALYSIS
3.1 No Significant Hazards Consideration Determination 3.2 Verification and Commitments 4.0 ENVIRONMENTAL EVALUATION Nine Mile Point Nuclear Station, LLC August 14, 2008
ATTACHMENT 1 DESCRIPTION AND ASSESSMENT
1.0 DESCRIPTION
The proposed amendment would: (1) revise the Technical Specification (TS) surveillance requirement (SR 3.1.3.2) frequency in TS 3.1.3, "Control Rod OPERABILITY," and (2) revise Example 1.4-3 in TS Section 1.4, "Frequency" to clarify the applicability of the 1.25 surveillance test interval extension.
The changes are consistent with Nuclear Regulatory Commission (NRC) approved Industryffechnical Specification Task Force (TSTF) Standard Technical Specification (STS) change TSTF-475 , Revision 1.
The Federal Register Notice published on November 13, 2007 announced the availability of this TS improvement through the consolidated line item improvement process (CLIIP) .
2.0 ASSESSMENT 2.1 Applicability of Published Safety Evaluation Nine Mile Point Nuclear Station, LLC (NMPNS) has reviewed the safety evaluation dated November 13, 2007 as part of the CLIIP. This review included a review of the NRC staffs evaluation, as well as the supporting information provided to support TSTF-475, Revision 1. NMPNS has concluded that the justifications presented in the TSTF proposal and the safety evaluation prepared by the NRC staff are applicable to Nine Mile Point Unit 2 (NMP2) and justify this amendment for the incorporation of the changes to the NMP2 TS.
2.2 Optional Changes and Variations NMPNS is proposing to implement the following TS editorial changes which differ from those TS changes described in TSTF-475, Revision 1, and the NRC staffs model safety evaluation dated November 13, 2007. The changes do not adversely impact the considerations or conclusions in the model safety evaluation or the intent of the amendment.
NMPNS chooses to designate Surveillance Requirement (SR) 3.1.3.2 as "Deleted" and retain current SR numbers SR 3.1.3.3, SR 3.1.3.4, and SR 3.1.3.5. This proposed variation will alleviate the requirement to make editorial changes listed in TSTF-475, Revision 1 for TS 3.1.3, 3.1.4 and associated TS Bases .
Additionally, the TSTF-475, Revision 1 requested change to the TS Bases for SR 3.1.3.4 (to revise references to SR 3.1.4.3 and SR 3.1.4.4) was not included as these surveillances are not affected by the proposed changes.
During the NMP2 conversion to the STS (NUREG-1433) for TS 3.3.1.2, "Source Range Monitor (SRM)
Instrumentation" by Amendment 91 dated February 15,2000 (TAC No. MA3822), Required Action E.2 was revised and presently reads "Initiate action to fully insert all insertable control rods in core cells containing one or more fuel assemblies." The term "fully" was also included in TS Bases 3.3.1.2.
Therefore, these TSTF-475 , Revision 1 changes are not necessary for NMP2.
3.0 REGULATORY ANALYSIS
3.1 No Significant Hazards Consideration Determination NMPNS has reviewed the proposed no significant hazards consideration determination (NSHCD) published in the Federal Register as part of the CLIIP. NMPNS has concluded that the proposed NSHCD 10f2
ATTACHMENT 1 DESCRIPTION AND ASSESSMENT presented in the Federal Register notice is applicable to NMP2 and is hereby incorporated by reference to satisfy the requirements of 10 CFR 50.91(a).
3.2 Verification and Commitments As discussed in the notice of availability published in the Federal Register on November 13, 2007 for this TS improvement, NMPNS has verified the applicability of TSTF-475 to NMP2, and commits to establishing Technical Specification Bases for the TS as described in this licensing amendment request.
These changes are based on TSTF change traveler TSTF-475 (Revision 1) that proposes revisions to the STS by: (1) revising the frequency of SR 3.1.3.2, notch testing of a withdrawn control rod, from "7 days after the control rod is withdrawn and THERMAL POWER is greater than the LPSP of RWM" to "31 days after the control rod is withdrawn and THERMAL POWER is greater than the LPSP ofRWM"; and (2) revising Example 1.4-3 in Section 1.4, "Frequency" to clarify that the 1.25 surveillance test interval extension in SR 3.0.2 is applicable to time periods discussed in NOTES in the "SURVEILLANCE" column in addition to the time periods in the "FREQUENCY" column.
4.0 ENVIRONMENTAL EVALUATION NMPNS has reviewed the environmental evaluation included in the model safety evaluation dated November 13,2007 as part of the CLIIP. NMPNS has concluded that the staffs findings presented in that evaluation are applicable to NMP2 and the evaluation is hereby incorporated by reference for this application.
20f2
ATTACHMENT 2 PROPOSED TECHNICAL SPECIFICATION CHANGES (MARKED-UP PAGES)
TS Page 1.4-4 TS Page 1.4-5 TS Page 3.1.3-2 TS Page 3.1.3-4 Nine Mile Point Nuclear Station, LLC August 14, 2008
Frequency 1.4 1.4 Frequency EXAMPLES EXAMPLE 1.4-2 (continued)
"Thereafter" indicates future performances must be established per SR 3.0.2, but only after a specified condition is first met (i.e., the once" performance in this lI example). If reactor power decreases to < 25% RTP, the measurement of both intervals stops. New intervals start upon reactor power reaching 25% RTP.
EXAMPLE 1.4-3 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY
NOTE------------------
Not required to be performed until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after ~ 25% RTP.
Perform channel adjustment. 7 days The interval continues whether or not the unit operation is
< 25% RTP between performances.
As the Note modifies the required performance of the Surveillance, it is construed to be part of the "specified Frequency. " Shoul d the 7 day i nterva 1 be exceeded wh il e operation is < 25% RTP, this Note allows 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after power reaches ~ 25% RTP to perform the Surveillance. The Surveillance is still considered to be within the "specified Frequency. " Therefore, if the Surve ill ance were not performed within the 7 day interval (plus the extension allowed by SR 3.0.2), but operation was < 25% RTP, it would not constitute a failure of the SR or failure to meet the LCO. Also, no violation of SR 3.0.4 occurs when changing MODES, even with the 7 day Frequency not met, provided operation does not exceed 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />).\with power ~ 25% RTP. I
~/lolOed &;:f <6r< 3.0.:J)'3 (continued)
( PLus The exteIJS;O'"
NMP2 1.4-4 Amendment '"9-i)
Frequency 1.4 1.4 Frequency EXAMPLES EXAMPLE 1.4-3 (continued)
Once the unit reaches 25% RTP, 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> would be allowed for completing the Surveillance. If the Surveillance were not performed within this 12 hour1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> interval, there wou then be a failure to perform a Surveillance within the specified Frequency, and the provisi~ns.of SR 3.0.3 would apply. \
(fLl.5" the.. ex\eU6 1Q1-' AUo~d b~ 5R 3.0.d; EXAMPLE 1.4-4 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY
NOTE------------------
Only required to be met in MODE 1.
Verify leakage rates are within limits. 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Example 1.4-4 specifies that the requirements of this Surveillance do not have to be met until the unit is in MODE 1. The interval measurement for the Frequency of this Surveillance continues at all times, as described in Example 1.4-1. However, the Note constitutes an "otherwise stated" exception to the Applicability of this Surveillance.
Therefore, if the Surveillance were not performed within the 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> interval (plus the extension allowed by SR 3.0.2),
but the unit was not in MODE 1, there would be no failure of the SR nor failure to meet the LCO. Therefore, no violation of SR 3.0.4 occurs when changing MODES, even with the 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Frequency exceeded, provided the MODE change was not made into MODE 1. Prior to entering MODE 1 (assuming again that the 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Frequency were not met), SR 3.0.4 would require satisfying the SR.
NMP2 1.4-5 Amendment *)
Control Rod OPERABILITY 3.1.3 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. (continued) A.3 Perform SR 3.1.3.2
--aftEI- SR 3. 1.3.3 for 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> from discovery of I each withdrawn Condition A OPERABLE control rod. concurrent with THERMAL POWER greater than the low power setpoint (LPSP) of the RWM AND A.4 Perform SR 3.1.1.1. 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> B. Two or more withdrawn B.1 Be in MODE 3. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> control rods stuck.
C. One or more control C.1 --------NOTE---------
rods inoperable for RWM may be bypassed reasons other than as allowed by Condition A or B. LCO 3.3.2.1, if required, to allow insertion of inoperable control rod and continued operation.
Fully insert 3 hours3.472222e-5 days <br />8.333333e-4 hours <br />4.960317e-6 weeks <br />1.1415e-6 months <br /> inoperable control rod.
AND C.2 Disarm the associated 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> CRD .
(continued)
NMP2 3.1.3-2 Amendment "'*j
Control Rod OPERABILITY 3.1.3 SURVEILLANCE REQUIREMENTS continued SURVEILLANCE FREQUENCY SR 3.1. 3.2 SR 3.1.3.3 -------------------NOTE--------------------
Not required to be performed until 31 days after the control rod is withdrawn and THERMAL POWER is greater than the LPSP of the RWM.
Insert each~aFtially withdrawn control rod at least one notch.
31 days I SR 3.1.3.4 Verify each control rod scram time from In accordance fully withdrawn to notch position 05 is with
~ 7 seconds. SR 3.1. 4.1, SR 3.1. 4.2, SR 3. 1. 4 .3, and SR 3.1. 4.4 (continued)
NMP2 3.1.3-4 Amendment-*)
ATTACHMENT 3 PROPOSED TECHNICAL SPECIFICATIONS BASES CHANGES (MARKED-UP PAGES)
TS Bases Page B 3.1.3-4 TS Bases Page B 3.1.3-7 TS Bases Page B 3.1.3-8 Nine Mile Point Nuclear Station, LLC August 14,2008
Control Rod OPERABILITY B 3.1.3 BASES ACTIONS A.I. A.2. A.3. and A.4 (continued) control rod separation criteria are not met. Therefore, a verification that the separation criteria are met must be performed immediately. The stuck control rod separation criteria are not met if: a) the stuck control rod occupies a location adjacent to two "slow" control rods, b) the stuck control rod occupies a location adjacent to one "slow" control rod, and the one "slow" control rod is also adjacent to another "slow" control rod, or c) if the stuck control rod occupies a location adjacent to one "slow" control rod when there is another pair of "slow" control rods elsewhere in the core adjacent to one another. The description of "slow" control rods is provided in LCD 3.1.4, "Control Rod Scram Times." In addition, the associated control rod drive must be disarmed within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />. The allowed Completion Time of 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> is acceptable, considering the reactor can still be shut down, assuming no additional control rods fail to insert, and provides a reasonable amount of time to perform the Required Action in an orderly manner. The control rod must be isolated from both scram and normal insert and withdraw pressure . Isolating the control rod from scram and normal insert and withdraw pressure prevents damage to the CROM or reactor internals. The control rod isolation method should also ensure cooling water to the CRO is maintained.
Monitoring of the insertion capability for each withdrawn control rod must also be performed within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> from discovery of Condition A concurrent with THERMAL POWER greater than the l ow powe~setpoint (LPSP) of the RWM.
SR 3.1.3.2 a~ SR 3.1.3.3 ~FfeFffi periodic tests of the control rod insertion capability of withdrawn control rods.
Testing each withdrawn control rod ensures that a generic problem does not exist . This Completion Time also allows for an exception to the normal "time zero" for beginning the allowed outage time "clock." The Required Action A.3 Completion Time only begins upon discovery of Condition A concurrent with THERMAL POWER greater than the actual LPSP of the RWM, since the notch insertions may not be compatible with the requirements of rod pattern control (LCD 3.1.6) and the RWM (LCD 3.3.2.1) . The allowed Completion Time provides a reasonable time to test the control rods , considering the potential for a need to reduce power to perform the tests.
(continued)
NMP2 B 3.1.3-4 Revi sion.e;
Control Rod OPERABILITY B 3.1.3 BASES ACTIONS E.1 (continued)
If any Required Action and associated Completion Time of Condition A, C, or D are not met or nine or more inoperable control rods exist, the plant must be brought to a MODE in which the LCO does not apply. To achieve this status, the plant must be brought to MODE 3 within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />. This ensures all insertable control rods are inserted and places the reactor in a condition that does not require the active function (i.e., scram) of the control rods. The number of control rods permitted to be inoperable when operating above 10% RTP (i.e., no CRDA considerations) could be more than the value specified, but the occurrence of a large number of inoperable control rods could be indicative of a generic problem, and investigation and resolution of the potential problem should be undertaken. The allowed Completion Time of 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> is reasonable, based on operating experience, to reach MODE 3 from full power conditions in an orderly manner and without challenging plant systems.
SURVEILLANCE SR 3.1. 3.1 REQUIREMENTS The position of each control rod must be determined, to ensure adequate information on control rod position is available to the operator for determining control rod OPERABILITY and controlling rod patterns. Control rod position may be determined by the use of OPERABLE position indicators, by moving control rods to a position with an OPERABLE indicator, (full-in, full-out, or numeric indicator), by verifying the indicators one notch "out" and one notch "in" are OPERABLE, or by the use of other appropriate methods. The 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Frequency of this SR is based on operating experience related to expected changes in control rod position and the availability of control rod position indications in the control room.
3 .1.3.~ I -L -hJ \
-SR
{No"t'e ~ 5R 3.'
aRe-SR 3 .1.3.3
.3.a hfls bC:-~t-J ce e J Control rod insertion capability is demonstrated by inserting each partially or fully withdrawn control rod at least one notch and observing that the control rod moves.
The control rod may then be returned to its original position. This ensures the control rod is not stuck and free to insert on a scram signal.
not required when THERMAL POWER is lh I S SuRve, u, V7~e. 'IS (continued)
NMP2 B 3.1.3-7 Revi s i on..Q-J
Control Rod OPERABILITY B 3.1.3 BASES SURVEILLANCE REQUIREMENTS SR a.l.~.2 aRS SR 3.1.3 .3 (continued) r actual LPSP of the RWM since the notch insertions may not be compatible with the requirements of the banked position withdrawal sequence (BPWS) (LCD 3.1.6) and the RWM (LCD 3.3.2.1). TAe 7 day Ffe~ijeRe¥ sf ~R J.l.J.2 is eases eR sperating ex~erience related te tAe cAaRges lA eRD fwll¥ witRQraWR cSRtrel regs, Partiilly witRQraWR ~eRtrol fods are tested at a 31 gay Fre~YQR~y, gases SR tRe
~eteRtial ~ewer redijctieR re~ijired to allew tAe ceRtrel rod *
~ovemeRt , aRS cSRsideriRg t~e large testiRg sam~le of
,
r SR 3.1.3.4 Verifying the scram time for each control rod to notch position 05 is ~ 7 seconds provides reasonable assurance that the control rod will insert when required during a DBA or transient, thereby completing its shutdown function.
This SR is performed in conjunction with the control rod scram time testing of SR 3.1.4.1, SR 3.1.4.2, SR 3.1.4.3, and SR 3.1.4.4. The LOGIC SYSTEM FUNCTIONAL TEST in LCD 3.3.1.1, "Reactor Protection System (RPS)
Instrumentation," and the functional testing of SDV vent and drain valves in LCD 3.1.8, "Scram Discharge Volume (SOV)
Vent and Drain Valves," overlap this Surveillance to provide complete testing of the assumed safety function. The associated Frequencies are acceptable, considering the more frequent testing performed to demonstrate other aspects of control rod OPERABILITY and operating experience, which shows scram times do not significantly change over an operating cycle.
(continued)
NMP2 B 3.1.3-8 Rev is i on'~J
ATTACHMENT 4
SUMMARY
OF REGULATORY COMMITMENTS MADE IN THIS SUBMITTAL Nine Mile Point Nuclear Station, LLC August 14, 2008
ATTACHMENT 4
SUMMARY
OF REGULATORY COMMITMENTS MADE IN mrs SUBMITTAL LIST OF REGULATORY COMMITMENTS The following table identifies those actions committed to by NMPNS in this document. Any other statements in this submittal are provided for information purposes and are not considered to be regulatory commitments. Please direct questions regarding these commitments to T. F. Syrell, Licensing Director, at (315) 349-5219.
REGULATORY COMMITMENT DUE DATE NMPNS will establish the Technical Specifications Bases for This commitment will be TS B 3.1.3 consistent with those shown in TSTF-475, implemented within 60 days from Revision 1, "Control Rod Notch Testing Frequency and SRM the date of the approval of the Insert Control Rod Action" as described in the license proposed amendment.
amendment request.
1 of 1