L-13-213, Response to Request for Additional Information Regarding Overall Integrated Plan in Response to March 12, 2012 Commission Order Issuance of Order Modifying Licenses with Regard to Reliable Spent Fuel Pool Instrumentation
ML13184A019 | |
Person / Time | |
---|---|
Site: | Perry ![]() |
Issue date: | 07/02/2013 |
From: | Kaminskas V FirstEnergy Nuclear Operating Co |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
EA-12-051, L-13-213, TAC MF0802 | |
Download: ML13184A019 (13) | |
Text
FENOC" Perryl,tuclearfuwer Plant P,O.tux 97 l00enter Roe,d HrstEtregp tutry, Ohllo.
4408t t*Mr Qerrrtlrg@nWV VbAl@rfficaa, 4&2W5ffi2 VicePresident Fax:440,2&tr80?9 July2, ?A13 L-l3-213 10cFR 2.202 ATTN: Document ControlDeek U,S.NuclearRegulatory .Commission Washington, DC20555-0001
SUBJECT:
PerryNuclearPowerPlant DocketNo.50-4,40, LicenseNo.NPF-58 Response to Reques!forAdditional Informatiqn Reqafdinq FirstEnergv Nucle-qt Operating Company's (FFlllOC'slOverallInteqrated PlaE.inRgsponse tg Maich12.2012Commission Order l$ruance of Order to Modiry L.ige.nqeswith&gard to ReliabJe (Order SBFntFuelPoolIngtrumentation Nuqb.grEA-12-051) ffAC Ne.. MFQ8,02)
On March12,2012,theNuclearRegulatory Commission (NRC)issuedan order (Reference 1)to FENOC.Reference 1 wasimmediately effectiveandimposes additionalrequirements to increase thecapability of FENOCto mitigatebeyonddesign-basisexternalevents.Specificrequirements areoutlinedin Attachment 2 ot Reference 1.
Reference 1 requiredsubmission of an overallintegrated planby February 28,2013.
TheNRCInterimStaffGuidanc,e (Reference 2) wasissuedAugust29,2012and endorsedindustry guidance document NEI 12-02, Revision1 (Reference 3) with clarifications andeiceptionsidentified in Reference 2. Reference 3 providesdirection regarding the contentof theoverallintegrated plan.
ByletterdatedFebruary27,2013[Agenqnride Documents AccessandManagement System(ADAMS) Accession No.MLl3059M951, FENOCsubmitted overal!integrated plansfor reliablespentfuelpoolinstrumentation, whichincludedan overallintegrated planfor PerryNuciearPowerPlant,UnitNo.1, ByletterdatedJune10,2013(ADAMS Accession Nb.ML19155A539), theNRCstaffrequested additional information to completeits review.TheNRCalsoindicated in the letter that if information is unavailable by July5, 2013,datesasto whentheadditional information willbe submitted areto be provided.As discussed in the publicmeeting held on JuneZO,ZO13, providingthe responses in thesix-month updatereportsis acceptable.
Byelectronic miit datedJune25,2013, the NRC staffrequested additional information regarding powersupplies.Theresponse to therequestfor additionaf information is
PerryNuclearPowerPlant L-13-213 Page2 attached.Theapplicable six-month updateinwhichFENOCintendsto provide currently unavailable informationis indicatedin theattachment.
Thereare no newregulatory commitments contained in thisletter.lf thereareany questionsor if additionalinformation is required,pleasecontactMr.ThomasA. Lentz,
-
Manager FleetLicensing, at 330-3156810.
I decla.punderpenaltyof periurythattheforegoing is trueandcorrect.Executed on July t',2013.
Respectfully, il l,/,/)h
/-hl ( .r, I
{/rnU,{art*{-
VitoA, Kaminskas
Attachment:
Responseto Requestfor Information
References:
- 1. NRCOrderNumberEA-12-051, OrderModiffingLicenseswith Regardto Reliable SpentFuefPoolInstrumentation (ADAMS Accession No.ML12054A679)
- 2. NRCInterimStaffGuidance JLD-ISG -2012-03, Compliance withOrderEA-12-051, ReliableSpentFuefPoolInstrumentation, Revision 0, datedAugust29,2012 (ADAMSAccession No.M112221A339)
- 3. NucfearEnergyInstitute (NEl)12-02,Industry Guidance forCompliance withNRC OrderEA-12-051,"ToModifyLicenses withRegardto ReliableSpentFuelPool Instrumentation,"Revision1,datedAugust24,2912 cc: Director,Officeof NuclearReactorRegulation (NRR)
NRCRegionlll Administrator NRCResident Inspector NRRProjectManager
Attachment L-13-213 Responseto Requestfor Information Page1 of 11 By letterdatedFebruary27, 2013[Agencynruide Documents Accessand Management System(ADAMS)AccessionNo.ML13059A4951, FirstEnergy NuclearOperating Company (FENOC) submittedan overallintegrated plan (OlP)in response to the March12,2012,NuclearRegulatory Commission (NRC)OrderEA-12-051modifying licenseswithregardto reliablespentfuelpool(SFP)instrumentation (ADAMS Accession No.ML12054A679) for PerryNuclearPowerPlant(PNPP),UnitNo.1. By fetterdatedJune1A,2013(ADAMSAccession No.ML131554539), the NRCstaff requested additionalinformationto completeits review.By electronic maildated June25,2013,the NRCstaffrequested additionalinformationregarding power supplies.The responseto the requestfor additional information(RAl)is provided below.The NRCstaffquestionis presented in boldtype,followedby the FENOC response.
LEVELSOF REQUIRED MONITORING The OIPstates,in part,that:
PNPPdischargesirradiatedfuel to a singlespent fuel storagepool.
With the exceptionof limitedtime periodsfor maintenanceor non' refuelingoperations,administrativecontrolsmaintaingates in the open positionbetweenthe followingpools: fuel storage& preparationpool, fuel transferpool,spent fuel storagepool, and cask pit. Thus,these pools are normallyinter-connectedand at the samewater levelwhen the water level in the spent fuel pool is greaterthan 3.5 feet abovethe top of stored fuel seated in the storage racks.
Level I - Leveladequateto support operationof the normal fuel pool cooling system Indicatedlevelon eitherthe primaryor backupinstrumentchannelof greaterthan elevation619'4" plus the accuracyof the SFPlevel instrumentchannel,which is to be determined.The highestpointon the spent fuel pool racks is at elevation591'4".
Level2 - Leveladequateto providesubstantialradiationshieldingfor a personstandingon the spent fuel pool operatingdeck.
Indicatedlevelon either primaryor backupinstrumentchannelof greaterthan 601'-4"plus the accuracyof the SFPlevelinstrument channel,which is to be determined.This monitoringlevelensuresthere is an adequatewater levelto providesubstantialradiationshieldingfor a personstandingon the SFPoperatingdeck.
Attachment L-13-213 Page2 of 11 Level3 - Levelwherefuel remainscoveredand actionsto implement make-upwater additionshould no longerbe deferred.
lndicatedlevelon eitherthe primaryor backupinstrumentchannelof greaterthan 594'-6"plus the accuracyof the SFP levelinstrumentation, which is to be determined.This monitoringlevelassuresthat there is adequatewater level abovethe stored fuel seated in the rack.
RAI-1
Pleaseprovidethe following:
a) For Level1, specify how the identifiedlocationrepresentsthe higherof the two points describedin the NEI [NuclearEnergyInstitute]12-02guidancefor this level.
b) The OIPstates,"the PerrySFPcontainsother materialscapableof providing sufficientdose such that the pool deckwould not be inhabitableshould the materialsbe uncovered." Giventhe potentialfor varied dose rates from other materialsstored in the SFP,describehow Level2 will be adjustedto other than the elevationprovidedin Section2 [Levelsof Required Monitoringlabove.
c) A clearlylabeledsketch depictingthe elevationview of the proposedtypical mountingarrangementfor the portionsof instrumentchannelconsistingof permanentmeasurement channelequipment(e.9.,fixed levelsensonsandlor stillingwells,and mountingbrackets).Indicateon this sketchthe datum vafues representingLevel 1, Level 2, and Level 3, as well as the top of the fuel. Indicateon this sketch the portionof the levelsensor measurement rangethat is sensitiveto measurementof the fuel pool level,with respectto the Level1, Level2, and Level3ndatum points.
Response
a) No othermeansof removing waterfromthe SFPexistabovethe skimmers.
Therefore, the identifiedlocationis the highestpointof the two optionsdescribedin the NEI 12-02guidancefor Level1 and is the levelthat is adequateto support operation of the normalfuelpoolcoolingsystem.
b) NEI 12-02allowsthe licenseeto use 10feet(+t-l foot)abovethe highestpointof anyfuel rackseatedin the spentfuelpoolsas Level2. FENOChaschosenthis optionfor PNPP. NEI 12-02,Section2.3.2statesthat"Level2 represents the range of waterlevelwhereany necessary operationsin the vicinityof the spentfuelpool can be completed withoutsignificantdoseconsequences fromdirectgamma radiationfromthe storedspentfuel." Level2 is associated withdoseratesfromthe fuel;therefore,it is notadjustedbasedon varieddoseratesfromotheritemsin the pool. FENOChasselectedguidedwaveradaras itstechnology, whichprovides continuous levelindicationfromLevel1 through Level 3. Data will for be available
Attachment L-13-213 Page3of11 mitigationstrategies whendeemedappropriate, to be initiated, basedon water levelsbetweenLevel1 and Level3. FENOCrecognizes additional materials stored prior in the SFPmaycausethe areato becomeuninhabitable to the monitored Level2. FENOCalsorecognizes thatthe locationof theseadditional materialsis subjectto changeduringeachrefueling outage.Therefore, FENOC does notplanto adjustLevel2, but insteadaddressthe potential doseratesassociated withother materialthroughalternatemeans.FENOC plans to evaluate the other materials in the SFPfor relocation or removalin supportof mitigation strategies.Basedon fuel poolmaterielconfiguration and projecteddose levels, FENOC plansto developan earlymethodto keepthosematerials adequately coveredusingmitigation strategies or a manualmakeupcapability froma locationnot impactedby the doserate.
Mitigationstrategiesfor addressing increaseddosesto personnel in the SFParea associated withothermaterialsin the poolin a beyond-design-basis accidentis to be addressed via PNPPDiverseand FlexibleCopingStrategies (FLEX)procedures, as needed.
c) As statedin letterdatedFebruary27, 2013,the OlPsare basedon conceptual designinformation.Progressmade,proposedchangesin compliance methods, updatesto the schedule, and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to support responseto this requestwouldbe availableafterfinaldesignis complete.
Therefore, FENOCintendsto submitthe responseto this requestin the February 2014six-monthupdate.
INSTRUMENTATION DESIGNFEATURES Arranqement The OIPstates,in part,that:
The planneddesignof this systemwill consist of two measurement channels,one primaryand one backup. Eachchannelwill consistof a levelsensornoh electronicsunit and an indicator.The primaryand backupinstrumentchannelsensorswill be protectedagainstmissiles that may resultfrom damageto the structureover the SFP. The sensors will be mountedat the western end of the fuel pool (the fuel preparation and storagepool),but as close to the adjacentcornersas possibleto minimizethe possibilityof a singleeventor missiledamagingboth channels. The sensor arrangementhas been proposedin a manner limitingany interferencewith existingequipmentin or aroundthe SFP.
This planneddesign is conservativeand is in compliancewith Order EA-12-051 however,it does representa minor deviationfrom the NEI Guidance.The NEIGuidancerecommendspuftinginstrumentation in opposite(diagonal)ends of the spentfuel pool. Due to the limited availablelocations(causedby interference)for installation,the instrurnentationcannot be installedon opposite(diagonal)ends of the pool. This planneddesignwill also not pose any potentialhazardto
Attachment L-13-213 Page4 of 11 personnelworking aroundthe pool or on the level instrumentation itself.
RAI.2 a) Pleaseprovidea clearlylabeledsketch or marked-upplant drawingof the planview of the SFParea,depictingthe SFPinsidedimensions,the planned locations/placement of the primaryand back-upSFPlevelsensor,and the proposedrouting of the cables that will extendfrom the sensors toward the location.ofthe read-ouUdisplay device.
b) Addresshow other materialstored in the SFPwill not createadverse interactionwith the fixed instrumentlocation(s).
Response
As statedin letterdatedFebruary27,2013,the OlPsare basedon conceptual design information.Progressmade,proposedchangesin compliance methods,updatesto the schedule,and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to supportresponseto thisrequest wouldbe availableafterfinaldesignis complete.Therefore, FENOCintendsto submit the responseto this requestin the February2014six-monthupdate.
Mountinq The OIPstates,in part,that:
Installedprimaryand back up SFPlevelinstrumentchannelequipment within the spent fuel pool shall be mountedto retainits design configurationduringand followingthe maximumseismicground motion consideredin the designof the spent fuel pool structurein accordancewith NRCJLD-ISG-2012-03 and NEI12-02Rev.1 guidance requirements.
RAI.3 Pleaseprovidethe following:
a) The designcriteriathat will be usedto estimatethe total loadingon the mountingdevice(s),includingstaticweightloadsand dynamicloads.
Describethe methodologythat will be usedto estimatethe total loading, inclusiveof designbasismaximumseismicloadsand the hydrodynamic loadsthat could resultfrom pool sloshingor other effectsthat could accompanysuch seismicforces.
b) A descriptionof the mannerin which the levelsensor(andstillingwell, if appropriate)will be attachedto the refuelingfloor and/orother support structuresfor each plannedpoint of attachmentof the probeassembly.
Attachment L-13-213 Page5 of 11 Indicatein a schematicthe portionsof the levelsensor that will serveas points of attachmentfor mechanical/mounting or electricalconnections.
c) A descriptionof the mannerby which the mechanicalconnectionswill attach
'instrument permanent the level to SFPstructuresso as to supportthe level sensorassembly.
Response
As statedin letterdatedFebruary27, 2013,the OlPsare basedon conceptual design information.Progressmade, proposed changesin compliance methods, updates to the schedule,and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to supportresponseto thisrequest wouldbe availableafterfinaldesignis complete.Therefore, FENOCintendsto submit the response to this request in the 2014 February six-month update.
Qualification The OIPstatesnin part,that:
The vendorsuppliedsensorsand associatedelectronicswill be requiredto be testedand qualifiedfor shock and vibrationas a resultof a beyonddesign basis externalevent. Seismicqualificationof equipmentwill be equivalentto the maximumgroundmotionspectrum for the area in which it is to be installed.
RAI.4 Pleaseprovidethe following:
a) A descriptionof the specific methodor combinationof methodsyou intend to apply to demonstratethe reliabilityof the permanentlyinstalledequipment under beyond-design-basis ambienttemperature,humidity,shock,vibration, and radiationconditions.
b) A descriptionof the testingand/oranalysesthat will be conductedto provide assurancethat the equipmentwill performreliablyunderthe worst-case credibledesignbasisloadingat the locationwherethe equipmentwill be mounted. Inctudea discussionof this seismicreliabilitydemonstrationas it appliesto (a)the levelsensor mountedin the SFParea,and (b) any control boxes,electronics,or read-outand re-transmittingdevicesthat will be employedto conveythe levelinformationfrom the levelsensorto the plant operatorsor emergencyresponders.
c) A descriptionof the specificmethodor combinationof methodsthat will be used to confirm the reliabilityof the permanentlyinstalledequipmentsuch that followinga seismiceventthe instrumentwill maintainits required accuracy.
Attachment L-13-213 Page6 of 11
Response
As statedin letterdatedFebruary27, 2013,the OlPsare basedon conceptual design information.Progressmade,proposedchangesin compliance methods,updatesto the schedule,and if needed,requestsfor reliefandthe baseswill be providedin the six-monthintegrated planupdates.The informationto supportresponse to thisrequest wouldbe availableafterfinaldesignis complete.Therefore, FENOCintendsto submit the responseto this requestin the February2014six-monthupdate.
Independence The OIPstates,in partnthat:
The primaryinstrumentchannelwill be independentof the backup instrumentchannel.The primaryand backupinstrumentchannelswill be physicallyand electricallyseparatedto maintainchannel independence.The sensorswill be separatedas far apartas practical within the constraintsof existingpool geometryand equipment.
Electronicsenclosureswill be separatedby a suitabledistanceor may utilizestructuralfeaturesof the room in which they are locatedas a barrierto provideprotectionagainsta single event(missile,explosionn etc.)from damagingthe electronicsof both instrumentchannels. Power will be suppliedfrom two separatepowerbusesat a minimum,with a preferenceof differentpowerdivisionsor channelsas available.
Gablingwill be run in separateconduitand/orcabletray. The same technologywill be usedfor both the primaryand backupinstrument channels.
RAI.5 Pleaseprovidethe following:
a) A descriptionof how the two channelsof the proposedlevelmeasurement system meetthis requirementso that the potentialfor a common-cause event to adverselyaffect both channelsis minimizedto the extent practicable.
b) Furtherinformationon how each levelmeasurementsystem,consistingof levelsensor electronics,cabling,and readoutdevicesnwill be designedand installedto addressindependencethroughthe applicationand selectionof independentpowersources,the use of physicaland spatialseparation, independenceof signalssent to the location(s)of the readoutdevices,and the independence of the displays.
Response
As statedin letterdatedFebruary27,2013,the OlPsare basedon conceptual design information.Progressmade,proposedchangesin compliance methods,updatesto the
Attachment L-13-213 Page7 of 11 schedule, and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to thisrequest to supportresponse wouldbe availableafterfinaldesignis complete.Therefore, FENOCintendsto submit the response to this requestin the February2014six-monthupdate.
PowerSupplies The OIPstates,in part,that:
Eachchannelwill normallybe poweredfrom independent120VAC
[volts-alternating current]powersourcesand will havea dedicated batterybackup. A minimumbafterylife of 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />swill be providedto allow for power restorationfrom portableequipment.
RAI.6 a) A descriptionof the electricalac powersourcesand capacitiesfor the primaryand backupchannels.
lf the level measurementchannelsare to be poweredthrough a batterysystem (eitherdirectlyor through an uninterruptiblepowersupply),pleaseprovidethe designcriteriathat will be appliedto size the batteryin a mannerthat ensures, with margin,that the channelwill be availableto run reliablyand continuously followingthe onsetof the beyond-design-basis eventfor the minimumduration needed,consistentwith the plant mitigationstrategiesfor beyond-design-basis externalevents(OrderEA-l 2-049).
Response
As statedin letterdatedFebruary27,2013,the OlPsare basedon conceptual design information.Progressmade,proposedchangesin compliance methods,updatesto the schedule, and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to thisrequest to supportresponse wouldbe availableafterfinaldesignis complete.Therefore, FENOCintendsto submit the responseto this requestin the February2014six-monthupdate.
Accuracv The OIPstates,in part,that:
The guidedwave radardesignprovidescontinuousmonitoringof the SFPwater level. The accuracyof the SFP levelinstrumentchannel, from sensorto main control room indicator,will be consistentwith the guidelinesof NRCJLD-ISG-2012-03 and NEI12-02,Rev.1. Instrument channelswill be designedto maintaintheir designaccuracywithout recalibrationfollowinga powerinterruptionor changein powersource.
Attachment L-13-213 Page8 of 11 RAI.7 Pleaseprovidethe following:
a) An estimateof the expectedinstrumentchannelaccuracyperformance(e.9.,
in percentof span) under both (a) normalSFPlevelconditions (approximatelyLevel 1 or higher)and (b) at the beyond-design-basis conditions(i.e.,radiation,temperature,humidity,post-seismicand post-shock conditions)that would be presentif the SFPlevelwere at the Level2 and Level3 datum points.
b) A descriptionof the methodologythat will be used for determiningthe maximumalloweddeviationfrom the instrumentchanneldesignaccuracy that will be employedunder normaloperatingconditionsas an acceptance criterionfor a calibrationprocedureto flag to operatorsand to technicians that the channelrequiresadjustmentto within the normalconditiondesign accuracy.
Response
As statedin letterdatedFebruary27, 2013,the OlPsare basedon conceptual design information.Progressmade,proposedchangesin compliance methods,updatesto the schedule,and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to supportresponseto thisrequest wouldbe availableafterfinaldesignis complete.Therefore, FENOCintendsto submit the responseto this requestin the February2014six-monthupdate.
Testinq The OIPstates,in part,that:
Testingwill be consistentwith the guidelinesof NRCJLD-ISG'2012-03 and NEI12-02,Rev.1. The instrumentchanneldesignwill include provisionsfor routinetestingand calibration.The instrumentationwill allow for in-situtestingand calibrationof the level instrumentationto minimizecalibrationeffort and instrumentdowntime. Calibration procedureswill be developedin accordancewith plant proceduresand vendor recommendations.
RAI.8 Pleaseprovidethe following:
a) A descriptionof the capabilityand provisionsthe proposedlevelsensing equipmentwill enableperiodictestingand calibration,includinghow this capabilityenablesthe equipmentto be tested in'situ.
Attachment L-13-213 Page9 of 11 b) A descriptionof how such testingand calibrationwill enablethe conductof regularchannelchecksof eachindependentchannelagainstthe other,and againstany other permanently-installed SFPlevel instrumentation.
c) A descriptionof how functionalcheckswill be performed,and the frequency at which they will be conducted. Describehow calibrationtests will be performed,and the frequencyat which they will be conducted. Providea discussionas to how thesesurveillanceswill be incorporatedinto the plant surueillanceprogram.
d) A descriptionof what preventativemaintenancetasks are requiredto be performedduring normaloperation,and the plannedmaximumsurueillance intervalthat is necessaryto ensurethat the channelsare fully conditionedto accuratelyand reliablyperformtheir functionswhen needed.
Response
As statedin letterdatedFebruary27,2013,the OlPsare basedon conceptual design information.Progressmade,proposedchangesin compliance methods,updates to the schedule,and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to thisrequest to supportresponse wouldbe available afterfinaldesignis completeandthe FENOCengineering change processhasprogressed procedure to the pointof determining needed details for testing and calibration. lnerefore,FENOCintendsto submitthe responseto this requestin the August2014six-monthupdate.
Displav The OIPstates,in part,that:
The displaywill be consistentwith the guidelinesof NRC JLD-ISG-2012-03 and NEI { 2-02Rev.1. Trainedpersonnelwill, at a minimum,be able to monitorthe SFPwater levelfrom an appropriate and accessiblelocation,and will provideon demandor continuous indicationof SFPwater level. The SFPlevel instrumentationwill providefor displayof fuel pool levelusing an indicatorlocatedin the main control room. The indicatorwill be poweredby the instrument loop and will not requireadditionalpowercircuitsfrom those described above.
RAI-9
Pleaseprovidethe following:
a) The specificlocationfor the primaryand backupinstrumentchanneldisplay' b) lf the primaryor backupdisplaylocationis other than the main control room, then providejustificationfor promptaccessibilityto displaysincluding
Attachment L-13-213 P a g e1 0o f 1 1 primaryand alternateroute evaluation,habitabilityat displaylocation(s),
continualresourceavailabilityfor personnelresponsibleto promptlyread displays,and provisionsfor communicationswith decisionmakersfor the variousSFPdrain down scenariosand externalevents.
c) The reasonsjustifyingwhy the locationsselectedenablethe information from these instrumentsto be considered"promptlyaccessible"to various drain-downscenariosand externalevents.
Response
TheSFPlevelinstrumentation, primaryandbackupinstrument channeldisplay, willbe locatedin the maincontrolroom.As a result,a responseto part(b) of thisrequestis not needed.The maincontrolroomis expectedto be occupiedat all times;therefore, the locationis considered promptlyaccessible.
PROGRAMFEATURES Procedures The OIPstates, in part, that:
Procedureswill be establishedand maintainedfor the testing, calibration,operationand abnormalresponseissuesassociatedwith the primaryand backupspent fuel pool instrumentationchannels.
RAt-l0 Pleaseprovidea descriptionof the standards,guidelinesand/orcriteriathat will be utilizedto developproceduresfor inspection,maintenance,repair,operation, abnormalresponse,and administrativecontrolsassociatedwith the SFPlevel instrumentation,as well as storageand installationof portableinstruments.
Response
As statedin letterdatedFebruary27,2013,the OlPsare basedon conceptual design information.Progressmade, proposed changes in compliance methods, updates to the schedule, and if needed,requestsfor reliefandthe baseswillbe providedin the six-monthintegrated planupdates.The information to supportresponseto thisrequest wouldbe available afterfinaldesignis completeandthe FENOCengineering change processhasprogressed to the pointof determiningproceduredetailsneededfor testing andcalibration, including identification of standards,guidelinesand/orcriteriathatwill be usedto developthe procedures.Therefore, FENOCintendsto submitthe response to this requestin the August2014six-month update.
Attachment L-13-213 Page11of11 Testinsand Galibration The OIPstates,in part,that:
Per NRCOrderEA-12-051,processeswill be establishedand maintained for schedulingand implementingnecessarytestingand calibrationof primaryand backupSFPlevelinstrumentchannelsin orderto maintain the designaccuracy.
RAt-11 Pleaseprovidethe following:
a) Furtherinformationdescribingthe maintenanceand testing programthe licenseewill establishand implementto ensurethat regulartestingand calibrationis performedand verifiedby inspectionand audit to demonstrate conformancewith designand system readinessrequirements.Includea descriptionof your plansfor ensuringthat necessarychannelchecks, functionaltests, periodiccalibration,and maintenancewill be conductedfor the level measurementsystemand its supportingequipment.
b) Describehow the guidancein NEI 12-02,Section4.3,regarding compensatoryactionsfor one or both non-functioningchannelswill be addressed.
c) Describewhat compensatoryactionsare plannedin the eventthat one of the instrumentchannetscannot be restoredto functionalstatuswithin 90 days.
Response
As statedin letterdatedFebruary27, 2013,the OlPsare basedon conceptual design information.Progressmade, proposed changes in compliance methods,updates to the schedule,and if needed,requestsfor reliefandthe baseswillbe providedin the six-month integratedplanupdates. The informationto response support to thisrequest wouldbe availableafterfinaldesignis completeandthe FENOCengineering change processhasprogressed to the pointof determiningproceduredetailsneededfor testing and calibration.Therefore, FENOCintendsto submitthe responseto this requestin the August2014six-monthupdate.