Pages that link to "Low Pressure Cooling Injection"
Jump to navigation
Jump to search
The following pages link to Low Pressure Cooling Injection:
Displayed 50 items.
- ML20236D947 (← links)
- Main Steam Line (← links)
- Auxiliary Feed Water (← links)
- ML22032A143 (← links)
- Main Steam (← links)
- Containment Spray (← links)
- Rod Worth Minimizer (← links)
- ML22307A143 (← links)
- Low Pressure Coolant Injection (← links)
- Emergency Core Cooling System (← links)
- Safety Relief Valve (← links)
- PY-CEI-NRR-1849, Amends 940408 Response to GL 89-10,Suppl 6 to Include Info Obtained as Result of Refueling Outage 4 Activities.Gl 89-10 MOV Testing Schedule Extension & Application of Grouping Methodology,Bases & Justification Encl (← links)
- Control Room Envelope (← links)
- NRC-23-0063, Inservice Testing Program for Pumps and Valves - Part 12: IST Program Pump Basis Revision 1 (← links)
- Extraction steam (← links)
- Turbine Gland Sealing System (← links)
- Turbine Gland Steam Sealing System (← links)
- Reactor Water Recirculation (← links)
- Emergency Feedwater System (← links)
- Emergency Feedwater Actuation System (← links)
- Control rod blade (← links)
- Moisture Separator Reheater (← links)
- Control Room Emergency Ventilation Air Supply (← links)
- ML24240A364 (← links)
- Main Turbine Bypass System (← links)
- Rod Sequence Control System (← links)
- Control Room Emergency Air Temperature Control System (← links)
- 05000324/LER-1989-004, :on 890225,steam Leak Occurred on RCIC Outboard Steam Supply Isolation Valve in Vicinity of Steam Leak Detection Temp Switch.Caused by Actuation of Steam Supply Isolation Valve.Weld Seal Completed (← links)
- 05000271/LER-1989-016, :on 890330,automatic Start of Core Spray & Sys a RHR Pumps Occurred While Pressurizing Primary Containment.Caused by Inadequate Procedure.Design Change That Implemented Logic Change Reviewed (← links)
- 05000324/LER-1989-004-02, :on 890225,channel a of RCIC Sys Steam Leak Detection Instrumentation Received Isolation Signal & Inboard Isolation Valve Isolated.Caused by Steam Leak.Valve Body to Bonnet Joint Wrapped W/Blankets (← links)
- 05000324/LER-1989-008-03, :on 890605,unplanned LOCA Initiation Signal Occurred During Routine Maint Testing of ECCS Resulting in Auto Starting of LPCI Core Spray & RHR Pumps.Caused by Spurious Trip of ECCS Trip Unit.Unit Replaced (← links)
- 05000374/LER-1989-004, :on 890201,determined That Static-O-Ring Min Flow Switch Exceeded Rejection Limits.Cause of Failure Could Not Be Determined from Insp.Replacement Flow Switch Installed,Calibr & Functionally Tested (← links)
- 05000277/LER-1987-023-01, :on 871014,HPCI Sys Disabled Due to Blown Logic Fuse.Cause Unknown.Fuse Replaced within 5 Minutes.No Addl Corrective Actions Planned (← links)
- 05000374/LER-1989-004-01, :on 890201,determined That Static O-Ring RHR Min Flow Switch Exceeded Rejection Limits During Instrument Surveillance.Reject & Flow Switches Replaced (← links)
- 05000341/LER-1987-046, :on 870820,identified Deficiencies in Raychem Installations.Caused by Inadequacies in Training of Raychem Installers,Lack of Insp Requirement & Previous Specification Deficiencies.Installations Repaired & Replaced (← links)
- 05000277/LER-1987-022, :on 870929,HPCI Disabled Due to Blown Power Fuse in HPCI Logic Panel.Cause Unknown.Fuse Replaced within 35 Minutes,Static Inverter Placed on Ac Feed & Battery Terminal Voltage Monitored Every 4 H (← links)
- ML20217B149 (← links)
- 05000341/LER-1987-009, :on 870325,RHR Pump C Tripped Due to Inboard Isolation Valve Closing.Caused by Intermittent Failure of Master Trip Unit.Futher Investigation of Master Trip Unit Will Be Made by Mfg.Isolation Logic Reset (← links)
- 05000325/LER-1988-020-01, :on 880915,RCIC Sys E51 Received Logic Channel B Supply Line Isolation,Closing Outboard Steam Supply Isolation Valve.Caused by Damage to Speed Sensor & Connector.Warning Signs Posted (← links)
- 05000325/LER-1985-059, :on 851102,reactor Scrammed Due to Primary Containment Group 1 Isolation,Rcic Trip & Trip/Lockout of Diesel Generator 4.Personnel Disciplined & Followup Meetings W/Shift Personnel Held (← links)
- 05000341/LER-1988-024, :on 880705,isolation of HPCI During Performance of Functional Test Occurred.Caused by Personnel Error. Surveillance Successfully Performed on Same Day & Accountability Meeting Held W/Individual (← links)
- 05000265/LER-1997-003-04, :on 970321,2B Core Spray Room Cooler Fouled Due to Hydrolyzing Debris.Cs Room Cooler Was Cleaned Under Nwr 960039336-01 & Qctp 1110-12, ECCS Room Cooler Trending Program, Has Recently Been Rewritten (← links)
- 05000296/LER-1985-006, :on 850213,mismatch Between Gemac Water Level Indicators Developed While at Low Pressure.Cause Attributed to Leak in Channel a Ref Leg Line X-28a.Operators Trained to Diagnose Water Level Problems (← links)
- 05000374/LER-1992-005-04, :on 920322, 2A DG Auto Started & RHR 2B Low Pressure Cooling Injection, 2C Low Pressure Cooling Injection & RCIC Sys Received Initiation Signals.Caused by Spike in Instrument Line.Procedure Revised (← links)
- 05000324/LER-1995-002-02, :on 950510,HPCI Sys Failed to Operate as Required During Performance of HPCI Periodic Test.Caused by End of Burnout.Verified Adequacy of Similar Resistors in Unit 1 & 2HPCI & RCIC Sys (← links)
- ML20070F122 (← links)
- BSEP-93-0033, Special Rept SR 2-93-0002:on 930209,reactor Bldg Fire Door 206 Declared Inoperable to Allow Equipment Cables & Lighting to Be Run Through Door.Compensatory Measures Remained in Effect Until Door Restored on 930223 (← links)
- BECO-90-041, Application for Amend to License DPR-35,changing Tech Spec 3/4.5, Core & Containment Cooling Sys to Reduce Unnecessary Wear Imposed by Excessive Surveillances on Operable Sys Components & Out of Svc Time to 72 H (← links)
- NRC-90-0025, Responds to NRC Re Violations Noted in Insp Rept 50-341/89-17.Corrective Actions:Design of Door Seal Air Supply Upgraded So That Single Failure Will Not Cause Loss of Door Integrity & Refresher Course Included in Training (← links)
- 05000325/LER-1989-023, :on 891116,reactor Shutdown When Drywell to Suppression Chamber Vacuum Breaker Opened.Caused by Excessive Vibration & Lack of Proper Space Between Actuator Arm & Piston.Procedures Will Be Revised (← links)