05000440/FIN-2008006-05: Difference between revisions

Finding

Title

Licensee-Identified Violation

Description

Title 10 CFR Part 50, Appendix B, Criterion III, Design Control requires in part that design control measures shall provide for verifying or checking the adequacy of design, such as by the performance of a suitable testing program. Contrary to this, between mid 1990s and June 2008, approximately 40, 480 Vac motor control center components, such as, starter coils and interposing relays, had not been periodically tested to verify the adequacy of available voltages for their proper function. This was identified in the licensees corrective action program as Condition Report 08-38977. This finding was of very low safety significance because the failure to perform periodic testing did not impact current operability of these components since the purpose of the periodic testing was to assure the minimum voltage remained acceptable as these components aged

05
Site:	Perry
Report	IR 05000440/2008006 Section 4OA7
Date counted	Jun 30, 2008 (2008Q2)
Type:	NCV: Green
cornerstone	Mitigating Systems
Identified by:	Licensee-identified
Inspection Procedure:
Inspectors (proximate)	J Jacobson S Sheldon W Sherbin C Brown S Kobylarz V Meghani M Jones A Stone B Jose
INPO aspect
'
v • d • e

Finding - Perry - IR 05000440/2008006

1(0)2(17)3(6)4(10)5(7)6(5)7(0)8(0)402(0)403(0)404(0)502(0)2(0)5(0)

IR 05000440/2008006: 1 2 3 4 5

Finding List (Perry) @ 2008Q2

CCA Matrix: 2008Q2

	Q	CCA	Title
05000440/FIN-2007004-01	2007Q3		Loss of Decay Heat Removal Resulting from Failure to Follow Procedures
05000440/FIN-2007005-10	2007Q4		Adequacy of Reactor Core Isolation Cooling System Surveillance Testing
05000440/FIN-2007005-11	2007Q4		Adequacy of Reactor Core Isolation Cooling System Flow Controller Tuning Procedures
05000440/FIN-2007005-09	2007Q4		Adequacy of Maintenance Associated with Emergency Service Water B Strainer Failure
05000440/FIN-2007010-01	2007Q4		Appropriate Classification of Condition Report for RCIC Failure to Run
05000440/FIN-2007010-02	2007Q4		RCIC Operability Between January 2006 and December 2007
05000440/FIN-2007010-04	2007Q4		Quality of Immediate Investigations
05000440/FIN-2008002-05	2008Q1		Inadequate Test Control Program to Ensure Reactor Core Isolation Cooling System Operability (Section 1R22.b.2)
05000440/FIN-2008002-11	2008Q1	H.7	Loss of Safety Function of the Annulus Exhaust Gas Treatment System (Section 4OA3.6)
05000440/FIN-2008002-08	2008Q1		Failure to Report Timely Performance Indicator Information (Section 4OA1.b.2)
05000440/FIN-2008002-02	2008Q1	H.14	Failure to Implement Adequate Configuration Control Affecting \\\'A\\\' Reactor Water Cleanup System(Section 1R13)
05000440/FIN-2008002-10	2008Q1	P.1 P.1(a)	Inadequate Classification of Condition Report for Reactor Core Isolation Cooling (Section 4OA3.5)
05000440/FIN-2008002-09	2008Q1	P.5 P.2(a)	Failure to Ensure Recurrence of Reactor Core Isolation Cooling Inoperability Due to Improper Controller Settings (Section 4OA3.3)
05000440/FIN-2008002-06	2008Q1	H.7	Failure to Implement Testing of the Reactor Core Isolation Cooling Instrument Lines With Appropriate Procedures (Section 1R22.b.3)
05000440/FIN-2008002-03	2008Q1	P.2	Failure to Adequately Correct and Evaluate aCondition Affecting the ESW Pump and ItsAssociated Discharge Valves (Section 1R17)
05000440/FIN-2008002-01	2008Q1		Adequacy of Maintenance Associated With Emergency Service Water Strainer Failure (Section 1R12)
05000440/FIN-2008002-04	2008Q1	P.5 P.2(b)	Adequacy of Reactor Core Isolation Cooling System Flow Controller Tuning Procedures (Section 1R22.b.1)
05000440/FIN-2008002-12	2008Q1		Reactor Core Isolation Cooling System Flow Controller Reliability (Section 4OA2.4)
05000440/FIN-2008002-07	2008Q1		Failure to Make 10 CFR 50.72 Report (Section 4OA1.b.1)
05000440/FIN-2008006-04	2008Q2		Failure to Periodically Test Reactor Protection system Key Lock Bypass Switches
05000440/FIN-2008006-03	2008Q2		Standby Liqui9d Control Storage Tank Seismic Calculations Deficiencies
05000440/FIN-2008006-02	2008Q2	H.7	Failure to Maintain Configuration Control
05000440/FIN-2008006-01	2008Q2	P.2	Switchyard Voltage Found Outside Analyzed Maximum Limit
05000440/FIN-2008003-02	2008Q2	P.1(a)	Failure to Identify a Degraded Flow Control Valve Connector
05000440/FIN-2008003-01	2008Q2		Adequacy of Airlock Ball Valve Maintenance

Self-Identified List (Perry)

	Q	Title
05000440/FIN-2008002-13	2008Q1	Licensee-Identified Violation
05000440/FIN-2008002-14	2008Q1	Licensee-Identified Violation
05000440/FIN-2008002-15	2008Q1	Licensee-Identified Violation
05000440/FIN-2008002-16	2008Q1	Licensee-Identified Violation
05000440/FIN-2008002-17	2008Q1	Licensee-Identified Violation
05000440/FIN-2008003-06	2008Q2	Licensee-Identified Violation
05000440/FIN-2008003-03	2008Q2	Licensee-Identified Violation
05000440/FIN-2008003-04	2008Q2	Licensee-Identified Violation
05000440/FIN-2008003-05	2008Q2	Licensee-Identified Violation
05000440/FIN-2008006-05	2008Q2	Licensee-Identified Violation

[Perry Findings full list]

@@ Line 1: / Line 1: @@
 {{finding
-| title = LICENSEE-IDENTIFIED Violation
+| title = Licensee-Identified Violation
 | docket = 05000440
 | inspection report = IR 05000440/2008006

05000440/FIN-2008006-05: Difference between revisions

Latest revision as of 11:36, 30 May 2018

Navigation menu

05000440/FIN-2008006-05: Difference between revisions

Latest revision as of 11:36, 30 May 2018

Navigation menu

Search