ML102030352: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 18: | Line 18: | ||
==SUBJECT:== | ==SUBJECT:== | ||
PRELIMINARY REVIEW OF PROGRESS | PRELIMINARY REVIEW OF PROGRESS ENERGYS 10 CFR 50.59 EVALUATION Title 10 of the Code of Federal Regulations (10 CFR), Section 50.59 establishes the conditions under which licensees may make changes to the facility or procedures and conduct tests or experiments without prior NRC approval. Regulatory Guide 1.187, Guidance for Implementation of 10 CFR 50.59, Changes, Tests and Experiments, and Nuclear Energy Institute (NEI) 96-07, rev. 1, Guidelines for 10 CFR 50.59 Implementation, provide guidance for evaluating and reporting changes under 10 CFR 50.59. Progress Energy discussed its 10 CFR 50.59 approach for Crystal Rivers, Unit 3 delaminated containment repair activities during the June 30, 2010 meeting. | ||
The Nuclear Regulatory | The Nuclear Regulatory Commissions (NRCs) inspection program includes a module to assess each licensees use of 10 CFR 50.59 for evaluating and reporting changes, tests and experiments. The NRC Regional (Region II for Crystal River) inspectors have the responsibility and the lead for monitoring the licensees activities under 10 CFR 50.59. Due to the complexity and safety significance of the containment delamination and repairs at Crystal River, Unit 3, the office of Nuclear Reactor Regulation (NRR) is providing support to the Region II review of Progress Energys 10 CFR 50.59 screening and evaluation. Below is NRC feedback generated from the preliminary review of the licensees 10 CFR 50.59 evaluation and information presented during the June 30, 2010 public meeting. | ||
Summary of NRC feedback General feedback | Summary of NRC feedback General feedback | ||
* Most significant NRC feedback was generated from the three criteria below from 10 CFR 50.59(c)(2). | * Most significant NRC feedback was generated from the three criteria below from 10 CFR 50.59(c)(2). | ||
* The NRC would review the 50.59 evaluation after it is complete by the licensee via inspection. Below are examples of issues we believe may need to be further addressed or explored as you proceed with your 50.59 evaluation. | * The NRC would review the 50.59 evaluation after it is complete by the licensee via inspection. Below are examples of issues we believe may need to be further addressed or explored as you proceed with your 50.59 evaluation. | ||
* The NRC staff supports the | * The NRC staff supports the licensees commitment to conduct a structural integrity test to assure the structural integrity of the containment as presented during the June 30th public meeting. | ||
Result in more than a minimal increase in the likelihood of occurrence of a malfunction of a structure, system, or component (SSC) important to safety previously evaluated in the FSAR (as updated)? | Result in more than a minimal increase in the likelihood of occurrence of a malfunction of a structure, system, or component (SSC) important to safety previously evaluated in the FSAR (as updated)? | ||
NRC feedback: | NRC feedback: | ||
* From looking at NEI 96-07, rev. 1, Section 4.4 discusses compensatory actions to address nonconforming or degraded conditions. NEI 96-07 states, | * From looking at NEI 96-07, rev. 1, Section 4.4 discusses compensatory actions to address nonconforming or degraded conditions. NEI 96-07 states, If the licensee corrective action is either to accept the condition as is resulting in something different than its as-designed condition, or to change the facility or procedures, 10 CFR 50.59 should be applied to the corrective action, unless another regulation applies, e.g., | ||
10 CFR 50.55a. In these cases, the final corrective action becomes the proposed change that would be subject to 10 CFR 50.59. | 10 CFR 50.55a. In these cases, the final corrective action becomes the proposed change that would be subject to 10 CFR 50.59. Accordingly, the evaluation should address leaving the through-wall vertical cracks as is does not impact its current design | ||
bases of the containment structure under design loads and load combinations described in the FSAR. | |||
* The licensee should demonstrate that the repaired containment structure meets applicable codes described in the FSAR. | * The licensee should demonstrate that the repaired containment structure meets applicable codes described in the FSAR. | ||
Result in a design basis limit for a fission product barrier as described in the FSAR (as updated) being exceeded or altered? | Result in a design basis limit for a fission product barrier as described in the FSAR (as updated) being exceeded or altered? | ||
NRC feedback: | NRC feedback: | ||
* Containment pressure (which the licensee is not changing) is a design basis limit. | * Containment pressure (which the licensee is not changing) is a design basis limit. | ||
* Even though the minimum design tendon tension force is not included in the FSAR, the parameter is fundamental to the | * Even though the minimum design tendon tension force is not included in the FSAR, the parameter is fundamental to the barriers integrity. | ||
* The design basis calculations and structural integrity test is a means to provide reasonable assurance that the containment after the repair can withstand its design pressure during an accident. | * The design basis calculations and structural integrity test is a means to provide reasonable assurance that the containment after the repair can withstand its design pressure during an accident. | ||
* Also, as stated during the June 30, 2010 public meeting, the licensee is increasing the specified minimum design compressive strength of the existing containment concrete from 5000 psi to 5800 psi, which the minimum design compressive stress is identified in the FSAR. | * Also, as stated during the June 30, 2010 public meeting, the licensee is increasing the specified minimum design compressive strength of the existing containment concrete from 5000 psi to 5800 psi, which the minimum design compressive stress is identified in the FSAR. | ||
Line 39: | Line 41: | ||
* Per NEI 96-07, rev. 1, Section 4.3.8, if the licensee plans on using a different method of evaluation as described in the FSAR, then the licensee needs to show that the results are essentially the same as, or more conservative than, previous results. | * Per NEI 96-07, rev. 1, Section 4.3.8, if the licensee plans on using a different method of evaluation as described in the FSAR, then the licensee needs to show that the results are essentially the same as, or more conservative than, previous results. | ||
* Similarly, licensees can also use different methods without first obtaining a license amendment if those methods have been approved by the NRC for the intended application. | * Similarly, licensees can also use different methods without first obtaining a license amendment if those methods have been approved by the NRC for the intended application. | ||
* In summary, if the licensee changes the methodology from the one used for original calculations and analyses, this item under 10 CFR 50.59 will be answered | * In summary, if the licensee changes the methodology from the one used for original calculations and analyses, this item under 10 CFR 50.59 will be answered yes. | ||
* The licensee should evaluate the impact of leaving the through wall vertical cracks | However, no licensing action (i.e., license amendment) is needed per NEI 96-07, rev. 1, if the licensee meets the criteria in Section 4.3.8. | ||
* The licensee should evaluate the impact of leaving the through wall vertical cracks as is on the design and analysis method of evaluation described in the FSAR.}} |
Latest revision as of 16:45, 13 November 2019
ML102030352 | |
Person / Time | |
---|---|
Site: | Crystal River ![]() |
Issue date: | 07/28/2010 |
From: | Jason Paige Plant Licensing Branch II |
To: | |
Paige, Jason C, NRR/DORL,301-415-5888 | |
References | |
Download: ML102030352 (2) | |
Text
SUBJECT:
PRELIMINARY REVIEW OF PROGRESS ENERGYS 10 CFR 50.59 EVALUATION Title 10 of the Code of Federal Regulations (10 CFR), Section 50.59 establishes the conditions under which licensees may make changes to the facility or procedures and conduct tests or experiments without prior NRC approval. Regulatory Guide 1.187, Guidance for Implementation of 10 CFR 50.59, Changes, Tests and Experiments, and Nuclear Energy Institute (NEI) 96-07, rev. 1, Guidelines for 10 CFR 50.59 Implementation, provide guidance for evaluating and reporting changes under 10 CFR 50.59. Progress Energy discussed its 10 CFR 50.59 approach for Crystal Rivers, Unit 3 delaminated containment repair activities during the June 30, 2010 meeting.
The Nuclear Regulatory Commissions (NRCs) inspection program includes a module to assess each licensees use of 10 CFR 50.59 for evaluating and reporting changes, tests and experiments. The NRC Regional (Region II for Crystal River) inspectors have the responsibility and the lead for monitoring the licensees activities under 10 CFR 50.59. Due to the complexity and safety significance of the containment delamination and repairs at Crystal River, Unit 3, the office of Nuclear Reactor Regulation (NRR) is providing support to the Region II review of Progress Energys 10 CFR 50.59 screening and evaluation. Below is NRC feedback generated from the preliminary review of the licensees 10 CFR 50.59 evaluation and information presented during the June 30, 2010 public meeting.
Summary of NRC feedback General feedback
- Most significant NRC feedback was generated from the three criteria below from 10 CFR 50.59(c)(2).
- The NRC would review the 50.59 evaluation after it is complete by the licensee via inspection. Below are examples of issues we believe may need to be further addressed or explored as you proceed with your 50.59 evaluation.
- The NRC staff supports the licensees commitment to conduct a structural integrity test to assure the structural integrity of the containment as presented during the June 30th public meeting.
Result in more than a minimal increase in the likelihood of occurrence of a malfunction of a structure, system, or component (SSC) important to safety previously evaluated in the FSAR (as updated)?
NRC feedback:
- From looking at NEI 96-07, rev. 1, Section 4.4 discusses compensatory actions to address nonconforming or degraded conditions. NEI 96-07 states, If the licensee corrective action is either to accept the condition as is resulting in something different than its as-designed condition, or to change the facility or procedures, 10 CFR 50.59 should be applied to the corrective action, unless another regulation applies, e.g.,
10 CFR 50.55a. In these cases, the final corrective action becomes the proposed change that would be subject to 10 CFR 50.59. Accordingly, the evaluation should address leaving the through-wall vertical cracks as is does not impact its current design
bases of the containment structure under design loads and load combinations described in the FSAR.
- The licensee should demonstrate that the repaired containment structure meets applicable codes described in the FSAR.
Result in a design basis limit for a fission product barrier as described in the FSAR (as updated) being exceeded or altered?
NRC feedback:
- Containment pressure (which the licensee is not changing) is a design basis limit.
- Even though the minimum design tendon tension force is not included in the FSAR, the parameter is fundamental to the barriers integrity.
- The design basis calculations and structural integrity test is a means to provide reasonable assurance that the containment after the repair can withstand its design pressure during an accident.
- Also, as stated during the June 30, 2010 public meeting, the licensee is increasing the specified minimum design compressive strength of the existing containment concrete from 5000 psi to 5800 psi, which the minimum design compressive stress is identified in the FSAR.
Result in a departure from a method of evaluation described in the FSAR (as updated) used in establishing the design bases or in the safety analyses?
NRC feedback:
- Per NEI 96-07, rev. 1, Section 4.3.8, if the licensee plans on using a different method of evaluation as described in the FSAR, then the licensee needs to show that the results are essentially the same as, or more conservative than, previous results.
- Similarly, licensees can also use different methods without first obtaining a license amendment if those methods have been approved by the NRC for the intended application.
- In summary, if the licensee changes the methodology from the one used for original calculations and analyses, this item under 10 CFR 50.59 will be answered yes.
However, no licensing action (i.e., license amendment) is needed per NEI 96-07, rev. 1, if the licensee meets the criteria in Section 4.3.8.
- The licensee should evaluate the impact of leaving the through wall vertical cracks as is on the design and analysis method of evaluation described in the FSAR.