ML17082A637: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:ES-301 Transient and Event Checklist Form ES-301-5  CREW 1 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 3 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (1) SRO-U  RX 2                  4                  -                  2 1 1 0 NOR 1                  -                  1                  2 1 1 1 I/C 4 5 6 8 10                  7 9                  2 3                  9 4 4 2 MAJ 9 11                  8                  6 8                  5 2 2 1 TS 3 7                  -                  -                  2 0 2 2 RO  SRO-I (2) SRO-U  RX      2      4            4                              3 1 1 0 NOR      -      1            1                              2 1 1 1 I/C      4 8      3 6 7 9            2 3 5 7                              10 4 4 2 MAJ      9 11      8            6 8                              5 2 2 1 TS      -      2 5            -                              2 0 2 2 RO (1) SRO-I  SRO-U  RX            -            -      4                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            5 6            3 6      5 7                        6 4 4 2 MAJ            9 11            8      6 8                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 2 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 3 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (5) SRO-U  RX 2                  4                  -                  2 1 1 0 NOR 1                  -                  1                  2 1 1 1 I/C 4 5 6 8 10                  7 9                  2 3                  9 4 4 2 MAJ 9 11                  8                  6 8                  5 2 2 1 TS 3 7                  -                  -                  2 0 2 2 RO  SRO-I (4) SRO-U  RX      2      4            4                              3 1 1 0 NOR      -      1            1                              2 1 1 1 I/C      4 8      3 6 7 9            2 3 5 7                              10 4 4 2 MAJ      9 11      8            6 8                              5 2 2 1 TS      -      2 5            -                              2 0 2 2 RO (4) SRO-I  SRO-U  RX            -            -      4                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            5 6            3 6      5 7                        6 4 4 2 MAJ            9 11            8      6 8                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 3 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 3 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (3) SRO-U  RX 2            4                  4                        3 1 1 0 NOR 1            1                  -                        2 1 1 1 I/C 4 5 6 8 10            3 6 7 9                  5 7                        11 4 4 2 MAJ 9 11            8                  6 8                        5 2 2 1 TS 3 7            2 5                  -                        4 0 2 2 RO (3) SRO-I  SRO-U  RX      2                  -                                    1 1 1 0 NOR      -                  1                                    1 1 1 1 I/C      4 8                  3 6                                    4 4 4 2 MAJ      9 11                  8                                    3 2 2 1 TS      -                  -                                    0 0 2 2 RO (2) SRO-I  SRO-U  RX            -      4                  -                  1 1 1 0 NOR            1      -                  1                  2 1 1 1 I/C            5 6      7 9                  2 3                  6 4 4 2 MAJ            9 11      8                  6 8                  5 2 2 1 TS            -      -                  -                  0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 4 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 4 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (6) SRO-U  RX 2                  4                  -                  2 1 1 0 NOR 1                  -                  1                  2 1 1 1 I/C 4 5 6 8 10                  7 9                  3 9                  9 4 4 2 MAJ 9 11                  8                  7 8                  5 2 2 1 TS 3 7                  -                  -                  2 0 2 2 RO  SRO-I (7) SRO-U  RX      2      4            2                              3 1 1 0 NOR      -      1            1                              2 1 1 1 I/C      4 8      3 6 7 9            3 4 5 9                              10 4 4 2 MAJ      9 11      8            7 8                              5 2 2 1 TS      -      2 5            6                                3 0 2 2 RO (5) SRO-I  SRO-U  RX            -            -      2                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            5 6            3 6      4 5                        6 4 4 2 MAJ            9 11            8      7 8                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 5 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 4 5 6 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (8) SRO-U  RX      2      2                        -                  2 1 1 0 NOR      -      1                        1                  2 1 1 1 I/C      4 5      3 5 7 8 10                        2 3                  9 4 4 2 MAJ      7 8      9                        8 10                  5 2 2 1 TS      -      4 6                        -                  2 0 2 2 RO  SRO-I (9) SRO-U  RX 2                  2      6                              3 1 1 0 NOR 1                  -      1                              2 1 1 1 I/C 3 4 5 9                  3 8 10      2 3 4 7 9                               12 4 4 2 MAJ 7 8                  9      8 10                              5 2 2 1 TS 6                    -      5                              2 0 2 2 RO (6) SRO-I  SRO-U  RX            -            -      6                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            3 9            5 7      4 7                        6 4 4 2 MAJ            7 8            9      8 10                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 6 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 4 5 7 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (11) SRO-U  RX      2      2                        -                  2 1 1 0 NOR      -      1                        2                  2 1 1 1 I/C      4 5      3 5 7 8 10                        4 7                  9 4 4 2 MAJ      7 8      9                        9 11                  5 2 2 1 TS      -      4 6                        -                  2 0 2 2 RO  SRO-I (12) SRO-U  RX 2                  2      1                              3 1 1 0 NOR 1                  -      2                              2 1 1 1 I/C 3 4 5 9                  3 8 10      3 4 5 7 10                              12 4 4 2 MAJ 7 8                  9      9 11                              5 2 2 1 TS 6                    -      6 8                              3 0 2 2 RO (9) SRO-I  SRO-U  RX            -            -      1                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            3 9            5 7      3 5                          5 4 4 2 MAJ            7 8            9      9 11                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 7 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 4 6 7 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (10) SRO-U  RX 2            6                  1                        3 1 1 0 NOR 1            1                  -                        2 1 1 1 I/C 3 4 5 9            2 3 4 7 9                   3 5                          11 4 4 2 MAJ 7 8            8 10                  9 11                        6 2 2 1 TS 6              5                  -                        2 0 2 2 RO (7) SRO-I  SRO-U  RX      2                  -                                    1 1 1 0 NOR      -                  1                                    1 1 1 1 I/C      4 5                  2 3                                    4 4 4 2 MAJ      7 8                  8 10                                    4 2 2 1 TS      -                  -                                    0 0 2 2 RO (8) SRO-I  SRO-U  RX            -      6                  -                  1 1 1 0 NOR            1      -                  2                  2 1 1 1 I/C            3 9      4 7                  4 7                  6 4 4 2 MAJ            7 8      8 10                  9 11                  6 2 2 1 TS            -      -                  -                  0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27 ES-301 Transient and Event Checklist Form ES-301-5  CREW 8 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 5 6 7 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (13) SRO-U  RX 2            6                  1                        3 1 1 0 NOR 1            1                  -                        2 1 1 1 I/C 3 5 7 8 10            2 3 4 7 9                   3 5                          12 4 4 2 MAJ 9            8 10                  9 11                        5 2 2 1 TS 4 6            5                  -                        3 0 2 2 RO (11) SRO-I  SRO-U  RX      2                  -                                    1 1 1 0 NOR      -                  1                                    1 1 1 1 I/C      3 8 10                  2 3                                    5 4 4 2 MAJ      9                  8 10                                    3 2 2 1 TS      -                  -                                    0 0 2 2 RO (10) SRO-I  SRO-U  RX            -      6                  -                  1 1 1 0 NOR            1      -                  2                  2 1 1 1 I/C            5 7      4 7                  4 7                  6 4 4 2 MAJ            9      8 10                  9 11                  5 2 2 1 TS            -      -                  -                  0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns. 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. ES-301, Page 26 of 27}}
{{#Wiki_filter:ES-301 Transient and Event Checklist Form ES-301-5  CREW 1 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 3 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (1) SRO-U  RX 2                  4                  -                  2 1 1 0 NOR 1                  -                  1                  2 1 1 1 I/C 4 5 6 8 10                  7 9                  2 3                  9 4 4 2 MAJ 9 11                  8                  6 8                  5 2 2 1 TS 3 7                  -                  -                  2 0 2 2 RO  SRO-I (2) SRO-U  RX      2      4            4                              3 1 1 0 NOR      -      1            1                              2 1 1 1 I/C      4 8      3 6 7 9            2 3 5 7                              10 4 4 2 MAJ      9 11      8            6 8                              5 2 2 1 TS      -      2 5            -                              2 0 2 2 RO (1) SRO-I  SRO-U  RX            -            -      4                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            5 6            3 6      5 7                        6 4 4 2 MAJ            9 11            8      6 8                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)"
and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 2 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 3 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (5) SRO-U  RX 2                  4                  -                  2 1 1 0 NOR 1                  -                  1                  2 1 1 1 I/C 4 5 6 8 10                  7 9                  2 3                  9 4 4 2 MAJ 9 11                  8                  6 8                  5 2 2 1 TS 3 7                  -                  -                  2 0 2 2 RO  SRO-I (4) SRO-U  RX      2      4            4                              3 1 1 0 NOR      -      1            1                              2 1 1 1 I/C      4 8      3 6 7 9            2 3 5 7                              10 4 4 2 MAJ      9 11      8            6 8                              5 2 2 1 TS      -      2 5            -                              2 0 2 2 RO (4) SRO-I  SRO-U  RX            -            -      4                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            5 6            3 6      5 7                        6 4 4 2 MAJ            9 11            8      6 8                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 3 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15
-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 3 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (3) SRO-U  RX 2            4                  4                        3 1 1 0 NOR 1            1                  -                        2 1 1 1 I/C 4 5 6 8 10            3 6 7 9                  5 7                        11 4 4 2 MAJ 9 11            8                  6 8                        5 2 2 1 TS 3 7            2 5                  -                        4 0 2 2 RO (3) SRO-I  SRO-U  RX      2                  -                                    1 1 1 0 NOR      -                  1                                    1 1 1 1 I/C      4 8                  3 6                                    4 4 4 2 MAJ      9 11                  8                                    3 2 2 1 TS      -                  -                                    0 0 2 2 RO (2) SRO-I  SRO-U  RX            -      4                  -                  1 1 1 0 NOR            1      -                  1                  2 1 1 1 I/C            5 6      7 9                  2 3                  6 4 4 2 MAJ            9 11      8                  6 8                  5 2 2 1 TS            -      -                  -                  0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)" and "balance
-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 4 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 1 2 4 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (6) SRO-U  RX 2                  4                  -                  2 1 1 0 NOR 1                  -                  1                  2 1 1 1 I/C 4 5 6 8 10                  7 9                  3 9                  9 4 4 2 MAJ 9 11                  8                  7 8                  5 2 2 1 TS 3 7                  -                  -                  2 0 2 2 RO  SRO-I (7) SRO-U  RX      2      4            2                              3 1 1 0 NOR      -      1            1                              2 1 1 1 I/C      4 8      3 6 7 9            3 4 5 9                              10 4 4 2 MAJ      9 11      8            7 8                              5 2 2 1 TS      -      2 5            6                                3 0 2 2 RO (5) SRO-I  SRO-U  RX            -            -      2                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            5 6            3 6      4 5                        6 4 4 2 MAJ            9 11            8      7 8                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)"
and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 5 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 4 5 6 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (8) SRO-U  RX      2      2                        -                  2 1 1 0 NOR      -      1                        1                  2 1 1 1 I/C      4 5      3 5 7 8 10                        2 3                  9 4 4 2 MAJ      7 8      9                        8 10                  5 2 2 1 TS      -      4 6                        -                  2 0 2 2 RO  SRO-I (9) SRO-U  RX 2                  2      6                              3 1 1 0 NOR 1                  -      1                              2 1 1 1 I/C 3 4 5 9                  3 8 10      2 3 4 7 9 12 4 4 2 MAJ 7 8                  9      8 10                              5 2 2 1 TS 6                    -      5                              2 0 2 2 RO (6) SRO-I  SRO-U  RX            -            -      6                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            3 9            5 7      4 7                        6 4 4 2 MAJ            7 8            9      8 10                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)" and "balance
-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additiona lly serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 6 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 4 5 7 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (11) SRO-U  RX      2      2                        -                  2 1 1 0 NOR      -      1                        2                  2 1 1 1 I/C      4 5      3 5 7 8 10                        4 7                  9 4 4 2 MAJ      7 8      9                        9 11                  5 2 2 1 TS      -      4 6                        -                  2 0 2 2 RO  SRO-I (12) SRO-U  RX 2                  2      1                              3 1 1 0 NOR 1                  -      2                              2 1 1 1 I/C 3 4 5 9                  3 8 10      3 4 5 7 10                              12 4 4 2 MAJ 7 8                  9      9 11                              5 2 2 1 TS 6                    -      6 8                              3 0 2 2 RO (9) SRO-I  SRO-U  RX            -            -      1                        1 1 1 0 NOR            1            1      -                        2 1 1 1 I/C            3 9            5 7      3 5                          5 4 4 2 MAJ            7 8            9      9 11                        5 2 2 1 TS            -            -      -                        0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)" and "balance
-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 7 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 4 6 7 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (10) SRO-U  RX 2            6                  1                        3 1 1 0 NOR 1            1                  -                        2 1 1 1 I/C 3 4 5 9            2 3 4 7 9 3 5                          11 4 4 2 MAJ 7 8            8 10                  9 11                        6 2 2 1 TS 6              5                  -                        2 0 2 2 RO (7) SRO-I  SRO-U  RX      2                  -                                    1 1 1 0 NOR      -                  1                                    1 1 1 1 I/C      4 5                  2 3                                    4 4 4 2 MAJ      7 8                  8 10                                    4 2 2 1 TS      -                  -                                    0 0 2 2 RO (8) SRO-I  SRO-U  RX            -      6                  -                  1 1 1 0 NOR            1      -                  2                  2 1 1 1 I/C            3 9      4 7                  4 7                  6 4 4 2 MAJ            7 8      8 10                  9 11                  6 2 2 1 TS            -      -                  -                  0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)" and "balance
-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27
 
ES-301 Transient and Event Checklist Form ES-301-5  CREW 8 Facility:
LaSalle Date of Exam:
10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T  T Y P E Scenarios 5 6 7 - T O T A L M    I    N    I    M    U    M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO  SRO-I  (13) SRO-U  RX 2            6                  1                        3 1 1 0 NOR 1            1                  -                        2 1 1 1 I/C 3 5 7 8 10            2 3 4 7 9 3 5                          12 4 4 2 MAJ 9            8 10                  9 11                        5 2 2 1 TS 4 6            5                  -                        3 0 2 2 RO (11) SRO-I  SRO-U  RX      2                  -                                    1 1 1 0 NOR      -                  1                                    1 1 1 1 I/C      3 8 10                  2 3                                    5 4 4 2 MAJ      9                  8 10                                    3 2 2 1 TS      -                  -                                    0 0 2 2 RO (10) SRO-I  SRO-U  RX            -      6                  -                  1 1 1 0 NOR            1      -                  2                  2 1 1 1 I/C            5 7      4 7                  4 7                  6 4 4 2 MAJ            9      8 10                  9 11                  5 2 2 1 TS            -      -                  -                  0 0 2 2 RO  SRO-I  SRO-U  RX                                                                            1 1 0 NOR                                                                            1 1 1 I/C                                                                            4 4 2 MAJ                                                                            2 2 1 TS                                                                            0 2 2 Instructions:
: 1. Check the applicant level and enter the operating test number and Form ES
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at
-the-controls (ATC)" and "balance
-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additiona lly serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D.  (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1
-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right
-hand columns.
: 4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO
-I in manipulating plant controls.
ES-301, Page 26 of 27}}

Revision as of 21:02, 29 June 2018

2016 LaSalle County Station Initial License Examination Forms ES-301-5
ML17082A637
Person / Time
Site: LaSalle  Constellation icon.png
Issue date: 11/16/2016
From: Zoia C D
NRC/RGN-III/DRS/OLB
To:
Exelon Generation Co
Shared Package
ML15274A401 List:
References
ES-301-5
Download: ML17082A637 (8)
v • d • e


Text

ES-301 Transient and Event Checklist Form ES-301-5 CREW 1 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 1 2 3 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (1) SRO-U RX 2 4 - 2 1 1 0 NOR 1 - 1 2 1 1 1 I/C 4 5 6 8 10 7 9 2 3 9 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS 3 7 - - 2 0 2 2 RO SRO-I (2) SRO-U RX 2 4 4 3 1 1 0 NOR - 1 1 2 1 1 1 I/C 4 8 3 6 7 9 2 3 5 7 10 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS - 2 5 - 2 0 2 2 RO (1) SRO-I SRO-U RX - - 4 1 1 1 0 NOR 1 1 - 2 1 1 1 I/C 5 6 3 6 5 7 6 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)"

and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 2 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 1 2 3 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (5) SRO-U RX 2 4 - 2 1 1 0 NOR 1 - 1 2 1 1 1 I/C 4 5 6 8 10 7 9 2 3 9 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS 3 7 - - 2 0 2 2 RO SRO-I (4) SRO-U RX 2 4 4 3 1 1 0 NOR - 1 1 2 1 1 1 I/C 4 8 3 6 7 9 2 3 5 7 10 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS - 2 5 - 2 0 2 2 RO (4) SRO-I SRO-U RX - - 4 1 1 1 0 NOR 1 1 - 2 1 1 1 I/C 5 6 3 6 5 7 6 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)" and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 3 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15

-1 A P P L I C A N T E V E N T T Y P E Scenarios 1 2 3 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (3) SRO-U RX 2 4 4 3 1 1 0 NOR 1 1 - 2 1 1 1 I/C 4 5 6 8 10 3 6 7 9 5 7 11 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS 3 7 2 5 - 4 0 2 2 RO (3) SRO-I SRO-U RX 2 - 1 1 1 0 NOR - 1 1 1 1 1 I/C 4 8 3 6 4 4 4 2 MAJ 9 11 8 3 2 2 1 TS - - 0 0 2 2 RO (2) SRO-I SRO-U RX - 4 - 1 1 1 0 NOR 1 - 1 2 1 1 1 I/C 5 6 7 9 2 3 6 4 4 2 MAJ 9 11 8 6 8 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)" and "balance

-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 4 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 1 2 4 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (6) SRO-U RX 2 4 - 2 1 1 0 NOR 1 - 1 2 1 1 1 I/C 4 5 6 8 10 7 9 3 9 9 4 4 2 MAJ 9 11 8 7 8 5 2 2 1 TS 3 7 - - 2 0 2 2 RO SRO-I (7) SRO-U RX 2 4 2 3 1 1 0 NOR - 1 1 2 1 1 1 I/C 4 8 3 6 7 9 3 4 5 9 10 4 4 2 MAJ 9 11 8 7 8 5 2 2 1 TS - 2 5 6 3 0 2 2 RO (5) SRO-I SRO-U RX - - 2 1 1 1 0 NOR 1 1 - 2 1 1 1 I/C 5 6 3 6 4 5 6 4 4 2 MAJ 9 11 8 7 8 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)"

and "balance-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 5 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 4 5 6 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (8) SRO-U RX 2 2 - 2 1 1 0 NOR - 1 1 2 1 1 1 I/C 4 5 3 5 7 8 10 2 3 9 4 4 2 MAJ 7 8 9 8 10 5 2 2 1 TS - 4 6 - 2 0 2 2 RO SRO-I (9) SRO-U RX 2 2 6 3 1 1 0 NOR 1 - 1 2 1 1 1 I/C 3 4 5 9 3 8 10 2 3 4 7 9 12 4 4 2 MAJ 7 8 9 8 10 5 2 2 1 TS 6 - 5 2 0 2 2 RO (6) SRO-I SRO-U RX - - 6 1 1 1 0 NOR 1 1 - 2 1 1 1 I/C 3 9 5 7 4 7 6 4 4 2 MAJ 7 8 9 8 10 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)" and "balance

-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additiona lly serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 6 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 4 5 7 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (11) SRO-U RX 2 2 - 2 1 1 0 NOR - 1 2 2 1 1 1 I/C 4 5 3 5 7 8 10 4 7 9 4 4 2 MAJ 7 8 9 9 11 5 2 2 1 TS - 4 6 - 2 0 2 2 RO SRO-I (12) SRO-U RX 2 2 1 3 1 1 0 NOR 1 - 2 2 1 1 1 I/C 3 4 5 9 3 8 10 3 4 5 7 10 12 4 4 2 MAJ 7 8 9 9 11 5 2 2 1 TS 6 - 6 8 3 0 2 2 RO (9) SRO-I SRO-U RX - - 1 1 1 1 0 NOR 1 1 - 2 1 1 1 I/C 3 9 5 7 3 5 5 4 4 2 MAJ 7 8 9 9 11 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)" and "balance

-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 7 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 4 6 7 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (10) SRO-U RX 2 6 1 3 1 1 0 NOR 1 1 - 2 1 1 1 I/C 3 4 5 9 2 3 4 7 9 3 5 11 4 4 2 MAJ 7 8 8 10 9 11 6 2 2 1 TS 6 5 - 2 0 2 2 RO (7) SRO-I SRO-U RX 2 - 1 1 1 0 NOR - 1 1 1 1 1 I/C 4 5 2 3 4 4 4 2 MAJ 7 8 8 10 4 2 2 1 TS - - 0 0 2 2 RO (8) SRO-I SRO-U RX - 6 - 1 1 1 0 NOR 1 - 2 2 1 1 1 I/C 3 9 4 7 4 7 6 4 4 2 MAJ 7 8 8 10 9 11 6 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)" and "balance

-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

ES-301 Transient and Event Checklist Form ES-301-5 CREW 8 Facility:

LaSalle Date of Exam:

10/17/16 Operating Test Number: NRC 15-1 A P P L I C A N T E V E N T T Y P E Scenarios 5 6 7 - T O T A L M I N I M U M(*) CREW POSITION CREW POSITION CREW POSITION CREW POSITION S R O A T C B O P S R O A T C B O P S R O A T C B O P S R O A T C B O P R I U RO SRO-I (13) SRO-U RX 2 6 1 3 1 1 0 NOR 1 1 - 2 1 1 1 I/C 3 5 7 8 10 2 3 4 7 9 3 5 12 4 4 2 MAJ 9 8 10 9 11 5 2 2 1 TS 4 6 5 - 3 0 2 2 RO (11) SRO-I SRO-U RX 2 - 1 1 1 0 NOR - 1 1 1 1 1 I/C 3 8 10 2 3 5 4 4 2 MAJ 9 8 10 3 2 2 1 TS - - 0 0 2 2 RO (10) SRO-I SRO-U RX - 6 - 1 1 1 0 NOR 1 - 2 2 1 1 1 I/C 5 7 4 7 4 7 6 4 4 2 MAJ 9 8 10 9 11 5 2 2 1 TS - - - 0 0 2 2 RO SRO-I SRO-U RX 1 1 0 NOR 1 1 1 I/C 4 4 2 MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES

-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the "at

-the-controls (ATC)" and "balance

-of-plant (BOP)" positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additiona lly serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1

-for-1 basis. 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right

-hand columns.

4. For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO

-I in manipulating plant controls.

ES-301, Page 26 of 27

Retrieved from "https://kanterella.com/w/index.php?title=ML17082A637&oldid=754288"