ML061860449: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (StriderTol Bot change) |
||
(One intermediate revision by the same user not shown) | |||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:John -F-: Submittal to NRC From: | {{#Wiki_filter:John W**te - F-: Submittal to NRC A9-ALPae From: IIJo024s, T. R." <tjones2@entergy.com> | ||
To: <jrw 1 @nrc.gov> | |||
Date: 4/28 /06 4:40PM | |||
==Subject:== | ==Subject:== | ||
FW: | FW: Submittal to NRC From: Hinrichs, Gary H Sent: Friday, April 28, 2006 4:25 PM To: Jones, T. R. | ||
==Subject:== | ==Subject:== | ||
Submittal to NRC As per our Tuesday Conference call we promised a Unit 1 Dry Cask Storage plan and schedule.<<dry cask project plan rev 1 (3).doc>> | Submittal to NRC As per our Tuesday Conference call we promised a Unit 1 Dry Cask Storage plan and schedule. | ||
<<Unit 1 Dry Cask Storage Level II.doc>>CC: <jdn@nrc.gov> | <<dry cask project plan rev 1 (3).doc>> <<Unit 1 Dry Cask Storage Level II.doc>> | ||
0-'ý ý John Wbite -TFXT.htm Page 1 I' | CC: <jdn@nrc.gov> | ||
... | 0-'ý ý | ||
John Wbite - TFXT.htm Page 1 I' W I ie... T X ... | |||
John....... .. . . .. . . .... = r** ? * | |||
* r j* . .j.. r* .. . . . ~* *. . = .. | |||
* Paqe l if From: Hinrichs, Gary H Sent: Friday, April 28, 2006 4:25 PM To: Jones, T. R. | |||
==Subject:== | ==Subject:== | ||
Submittal to NRC As per our Tuesday Conference call we promised a Unit 1 Dry Cask Storage plan and schedule.<<dry cask project plan rev 1 (3).doc>> | Submittal to NRC As per our Tuesday Conference call we promised a Unit 1 Dry Cask Storage plan and schedule. | ||
<<Unit 1 Dry Cask Storage Level Il.doc>> | <<dry cask project plan rev 1 (3).doc>> <<Unit 1 Dry Cask Storage Level Il.doc>> | ||
John White -dry cask project plan rev 1 (3).doc Page | |||
John White - dry cask project plan rev 1 (3).doc Page 1illI11 J6h~Wiiite -dry cask project plan rev 1 (3).doc Page Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 1 of 19 PROJECT PLAN for Project No.: | |||
Project | |||
== Description:== | == Description:== | ||
Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool NOTE: This ProjectPlan is a revision of an earlierplan issued in August, 2005, that addressedSFP clean up and fuel inspection only. I Prepared: | |||
Signature Ul DCS Project Mgr Date Concurrence: | |||
Signature U2 DCS Project Mgr Date Concurrence: | |||
Signature PS&O Dept Mgr Date Concurrence: | |||
Signature Operations Mgmnt Date Concurrence: | |||
Signature Licensing Mgmnt Date Concurrence: | |||
Signature Rad Pro Superintendent Date Concurrence: | |||
Signature Rx. Engineering Supv. Date Concurrence: | |||
Signature Fuels Engineer Date Concurrence: | |||
Signature U1 Dept. Mgr Date Approved: | |||
Signature Management Sponsor Date | |||
John White - ,,q.ask project John.White. dry.cask.project.pl....e.......... Page 2 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 2 of 19 SAFETY FOCUS STATEMENT Safety will be focused on at all times during every phase and every activity of the Unit 1 Dry Cask Storage Project activities. This includes industrial safety (electrical safety, hazardous material and chemical handling, rigging, etc.), nuclear safety and radiological safety. | |||
* Every meeting will start with a discussion of safety and human performance. | |||
" Operating experience will be used for project planning and on an on-going basis. | |||
* Field activities will have daily pre-job briefings including discussions on safety, human performance error traps and operating experience. | |||
,,q.ask project | |||
dry.cask.project.pl....e.......... | |||
Page 2 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 2 of 19 SAFETY FOCUS STATEMENT Safety will be focused on at all times during every phase and every activity of the Unit 1 Dry Cask Storage Project activities. | |||
This includes industrial safety (electrical safety, hazardous material and chemical handling, rigging, etc.), nuclear safety and radiological safety.* Every meeting will start with a discussion of safety and human performance." Operating experience will be used for project planning and on an on-going basis.* Field activities will have daily pre-job briefings including discussions on safety, human performance error traps and operating experience. | |||
* Field activities will be closely monitored by supervision. | * Field activities will be closely monitored by supervision. | ||
* The Corrective Action Program will be fully utilized.* Project self-assessments and surveillances will be performed periodically and will include safety and human performance as assessment areas. | * The Corrective Action Program will be fully utilized. | ||
JonWu. e .... | * Project self-assessments and surveillances will be performed periodically and will include safety and human performance as assessment areas. | ||
-- Unit 1 Proiect Team Responsibility 4.2 Ul Infrastructure Modifications/Evaluations | |||
-- Unit 1 Proiect Team Responsibility 4.3 Program Evaluations | JonWu. e ak | ||
-- Unit 1 Proiect Team Responsibility 4.4 ISFSI -- Unit 2 Proiect Team Responsibility 4.5 Fabrication and Procurement of Equipment | .... rjc pa e 3.dcPg 3 ri John White - dry cask project_ plan. rev 1 (3).doc Page3 I Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 3 of 19 Table of Contents 1.0 Problem Definition 4 2.0 Proiect Obiectives 4 3.0 Alternatives Considered 4 3.1 Spent Fuel Entombment 4 3.2 Spent Fuel Relocation to East Pool 5 3.3 Spent Fuel Transfer 5 4.0 Action Plan 6 4.1 Spent Fuel Inspection -- Unit 1 Proiect Team Responsibility 6 4.2 Ul Infrastructure Modifications/Evaluations -- Unit 1 Proiect Team Responsibility 7 4.3 Program Evaluations -- Unit 1 Proiect Team Responsibility 8 4.4 ISFSI -- Unit 2 Proiect Team Responsibility 9 4.5 Fabrication and Procurement of Equipment - Unit 1 Proiect Team Responsibility 9 4.6 Fuel Loading and Dry Cask Operations -- PS&O Dept Responsibility 10 4.7 Miscellaneous Activities -- Unit 1 Project Team Responsibility 11 5.0 Cost 12 6.0 Schedule 12 7.0 References 13 Attachments A. Project Organization Chart 14 B. Project Flow Chart 15 C. Sketch of Transfer Path Activities 16 D. Cost Estimates 17 E. Schedule 18 | ||
-Unit 1 Proiect Team Responsibility 4.6 Fuel Loading and Dry Cask Operations | |||
-- PS&O Dept Responsibility 4.7 Miscellaneous Activities | Pacle 411 John | ||
-- Unit 1 Project Team Responsibility 5.0 Cost 12 6.0 Schedule 7.0 References | ýRhIWNP7ý!`Y cask project White dry cask plan rev 1 (3).doc projeýtýpLpýeyj_(3).qqq Page 4 I Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 4 of 19 1.0 Problem Definition Leakage is occurring from the Unit 1 Spent Fuel Pool (SFP'). Remediation of this condition can be accomplished by various options, including dry entombment of the spent fuel within the SFP, relocation of the spent fuel to another pool, or transfer of the spent fuel to dry cask storage at the new IPEC Independent Spent Fuel Storage Installation (ISFSI). This latter option has been determined to be the most prudent course of action such that *this project plan primarily focuses on spent fuel removal/storage and ancillary activities. However, the options of dry entombment and relocation to another pool are also reviewed to capture the considerations that led to the selected method of long-term storage. | ||
However, the options of dry entombment and relocation to another pool are also reviewed to capture the considerations that led to the selected method of long-term storage.A project organization chart for this effort is presented in Attachment A.2.0 Project Objectives This project is intended to prepare for and execute the offloading of the Unit 1 spent fuel from the SFP to dry cask storage and subsequent movement to the ISFSI. Major activities of this effort include | A project organization chart for this effort is presented in Attachment A. | ||
Preliminary review has indicated the technical feasibility of this approach.Spent fuel entombment in the SFP has been determined by the project to be non-viable based on licensing uncertainties and associated time considerations. | 2.0 Project Objectives This project is intended to prepare for and execute the offloading of the Unit 1 spent fuel from the SFP to dry cask storage and subsequent movement to the ISFSI. Major activities of this effort include fuel3 element inspection (completed 2), placement of fuel elements into individual Damaged Fuel Containers (DFCs) as needed, transfer/placement of fuel elements and/or DFCs into Multi Purpose Canisters (MPCs), placement of MPCs into transfer casks, movement of transfer casks to the Unit 2 Fuel Storage Building (FSB), intercask transfer of the MPCs to long-term storage containers and movement/placement of long-term storage containers to the ISFSI. A simplified flow chart of these activities is presented in Attachment B. A sketch of the primary transfer path activities is shown in Attachment C. | ||
3.2 Spent Fuel Relocation to East Pool Relocation of the spent fuel to the east pool would involve establishing the east pool as a viable Also referred to herein as the west fuel pool.2 Fuel inspections performed demonstrated structural integrity (i.e., no hairline cracks, pin hole leaks, etc.);although necessary, this is not fully sufficient to demonstrate that the fuel is intact per ISG-1 and ANSI M14.33.1 A damaged fuel container is specifically designed to contain a single fuel assembly with known or suspected defects, such as ruptured, severed or cracked fuel rods. | A separate project plan will be developed describing the activities associated with the subsequent drain down and desludging of the SFP. | ||
3.0 Alternatives Considered 3.1 Spent Fuel Entombment Entombment would be part of a shielded pool storage plan that involves covering the west fuel pool with 2.5-foot thick concrete shielding and then draining the pool to eliminate leakage. This has the advantage of leaving the fuel in place until overall IPEC decommissioning occurs. The primary disadvantage is that the somewhat unique nature of this storage method would require regulatory approval including the potential for public hearings. Preliminary review has indicated the technical feasibility of this approach. | |||
Additionally, a new gate would be required to facilitate fuel transfer between the west and east pools. These modifications would only provide for an approximate 10-year life after which either further repairs (primarily recoating) would be required or the fuel would be relocated generally consistent with 3.3 below.Spent fuel relocation to the east pool has been determined by the project to be non-viable due to economic considerations and the relatively short (10 year) service life of this option.3.3 Spent Fuel Transfer A direct transfer of Unit 1 spent fuel to dry cask storage would require the addition of significant infrastructure that currently does not exist. Two alternative approaches each involve transfer of the spent fuel to the Unit 2 Fuel Handling Building.Option A: Transfer the spent fuel to a wet intra-unit transport cask, move this cask to the Unit 2 Fuel Handling Building and offload the Unit 1 spent fuel into the Unit 2 spent fuel pool. The Unit 1 spent fuel could then be transferred to dry cask storage at a later time. This option would require a site licensing amendment. | Spent fuel entombment in the SFP has been determined by the project to be non-viable based on licensing uncertainties and associated time considerations. | ||
3.2 Spent Fuel Relocation to East Pool Relocation of the spent fuel to the east pool would involve establishing the east pool as a viable Also referred to herein as the west fuel pool. | |||
2 Fuel inspections performed demonstrated structural integrity (i.e., no hairline cracks, pin hole leaks, etc.); | |||
although necessary, this is not fully sufficient to demonstrate that the fuel is intact per ISG-1 and ANSI M14.33. | |||
1 A damaged fuel container is specifically designed to contain a single fuel assembly with known or suspected defects, such as ruptured, severed or cracked fuel rods. | |||
Paqe5 ~I Whites John White- | |||
.- dry dr_y -cask, p!;ýq_!qy 1 pFgject_ P!4rL~Y cask project I (3).doc (3).doc *Page5S1l Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 5 of 19 storage location, transferring the fuel and then draining the west fuel pool to eliminate leakage. | |||
Some of the actions in 3.3 below would also likely be required for this option. The primary advantage of this option is that the east pool was originally designed for spent fuel storage such that design intent would be unchanged with little or no licensing impact. Disadvantages are based in part on already-completed inspections of the east pool indicating that the pool surfaces (walls and floor) would require repair/recoating. Additionally, a new gate would be required to facilitate fuel transfer between the west and east pools. These modifications would only provide for an approximate 10-year life after which either further repairs (primarily recoating) would be required or the fuel would be relocated generally consistent with 3.3 below. | |||
Spent fuel relocation to the east pool has been determined by the project to be non-viable due to economic considerations and the relatively short (10 year) service life of this option. | |||
3.3 Spent Fuel Transfer A direct transfer of Unit 1 spent fuel to dry cask storage would require the addition of significant infrastructure that currently does not exist. Two alternative approaches each involve transfer of the spent fuel to the Unit 2 Fuel Handling Building. | |||
Option A: Transfer the spent fuel to a wet intra-unit transport cask, move this cask to the Unit 2 Fuel Handling Building and offload the Unit 1 spent fuel into the Unit 2 spent fuel pool. The Unit 1 spent fuel could then be transferred to dry cask storage at a later time. This option would require a site licensing amendment. | |||
Spent fuel transfer to the Unit 2 spent fuel pool has been determined by the project to be non-viable based on licensing, economic and Unit 2 operational considerations. | Spent fuel transfer to the Unit 2 spent fuel pool has been determined by the project to be non-viable based on licensing, economic and Unit 2 operational considerations. | ||
Option B: Transfer the spent fuel to a dry transfer cask, move the cask to the Unit 2 Fuel Handling Building where a new gantry crane would be used to perform an inter-cask transfer (i.e., stack-up) of the MPC to the long-term storage container, which would then be moved to the ISFSI.Option B has been determined by the project to be the preferred option for transfer of spent fuel from the Unit 1 SFP. This conclusion has been reached by general considerations of timeliness, economics, effects on Unit 2/3 operations and licensing. | Option B: Transfer the spent fuel to a dry transfer cask, move the cask to the Unit 2 Fuel Handling Building where a new gantry crane would be used to perform an inter-cask transfer (i.e., | ||
Relative to licensing in particular, dry cask storage within an outdoor ISFSI is an established industry approach for providing long-term storage capacity. | stack-up) of the MPC to the long-term storage container, which would then be moved to the ISFSI. | ||
The approach has been implemented successfully both at Entergy plants and at other nuclear facilities. | Option B has been determined by the project to be the preferred option for transfer of spent fuel from the Unit 1 SFP. This conclusion has been reached by general considerations of timeliness, economics, effects on Unit 2/3 operations and licensing. Relative to licensing in particular, dry cask storage within an outdoor ISFSI is an established industry approach for providing long-term storage capacity. The approach has been implemented successfully both at Entergy plants and at other nuclear facilities. 10CFR72 ("Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste") grants a General License for owning and operating an ISFSI to all holders of a Part 50 power reactor operating license provided the licensee satisfies various conditions given within 10CFR72. Various dry cask vendors have obtained NRC approval for their storage systems, receiving an approved final safety analysis report and certificate of compliance. This documentation is one of the elements of the written report required by 10CFR72.212. | ||
10CFR72 ("Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste") grants a General License for owning and operating an ISFSI to all holders of a Part 50 power reactor operating license provided the licensee satisfies various conditions given within 10CFR72. Various dry cask vendors have obtained NRC approval for their storage systems, receiving an approved final safety analysis report and certificate of compliance. | |||
This documentation is one of the elements of the written report required by | |||
A subset of the Option B process involves DFCs, for which a feasibility study is needed to establish whether full or partial use of DFCs is appropriate. | A subset of the Option B process involves DFCs, for which a feasibility study is needed to establish whether full or partial use of DFCs is appropriate. | ||
4.0 Action Plan John White -dry caskproject plan rev 1 (3).doc Page John White | 4.0 Action Plan | ||
Sequencing of activities described below should be in accordance with the attached schedule (see Section 6.0).4.1 Spent Fuel Inspection | |||
-- Unit I Proiect Team Responsibility Prior to initiation of the tasks described below, an ALARA plan should be prepared, reviewed and approved that addresses all aspects of SFP spent fuel assembly inspection. | John White - dry caskproject plan rev 1 (3).doc Page 6* | ||
Task I -Fuel Inspection (to be performed by sipping, if deemed necessary, based on feasibility study -see 4.5, Task I below)" Identify equipment/hardware needed to support fuel inspection. | John White dry cask project plan rev 1 (3).doc Page 611 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 6 of 19 NOTE: There is currently a separateproject underway involving transfer of spent fuel to dry cask storage from Units 2 and 3. Some of the same equipment to be used for the Units 2 and 3 efforts can be used for the Unit 1 efforts. Additionally, portions of the Unit 1 plan describedbelow involve regions of Unit 2. As a result, close coordination between these two projects should be maintained to maximize efficiency of equipment use and complimentaryactivities and to minimize duplication of effort. | ||
Procure such items as required and in a timely manner to support SFP inspection. | The activities described in this action plan will fall under the responsibility of the Unit 1 dry cask storage team, the Unit 2 dry cask storage team or the Planning, Scheduling and Outage Management Department (PS&0). Specific responsibility for each activity below is identified in the heading for each item. | ||
For existing tools needed to lift the fuel bundles from the baskets, tool refurbishment may be required.* Identify water level necessary to facilitate fuel inspection via sipping. If required, identify increased height requirements on SFP gates associated with this water level.* Procure as required, gate extensions to increase gate height (see 4.2, Task IV below)." Raise the level of the pool water sufficient to allow for fuel inspection via sipping." Prepare, review and approve fuel inspection procedure." Ensure proper training and qualification of personnel for sipping operations. | Current efforts include use of Holtec casks and equipment for much of the transfer/storage process. | ||
Reference herein to the load transfer cask and long-term storage containers are equivalent to Holtec HI-TRAC 100 Version D Transfer Cask and HI-STORM 100S Overpack, respectively. Sequencing of activities described below should be in accordance with the attached schedule (see Section 6.0). | |||
4.1 Spent Fuel Inspection -- Unit I Proiect Team Responsibility Prior to initiation of the tasks described below, an ALARA plan should be prepared, reviewed and approved that addresses all aspects of SFP spent fuel assembly inspection. | |||
Task I - Fuel Inspection (to be performed by sipping, if deemed necessary,based on feasibility study - see 4.5, Task I below) | |||
" Identify equipment/hardware needed to support fuel inspection. Procure such items as required and in a timely manner to support SFP inspection. For existing tools needed to lift the fuel bundles from the baskets, tool refurbishment may be required. | |||
* Identify water level necessary to facilitate fuel inspection via sipping. If required, identify increased height requirements on SFP gates associated with this water level. | |||
* Procure as required, gate extensions to increase gate height (see 4.2, Task IV below). | |||
" Raise the level of the pool water sufficient to allow for fuel inspection via sipping. | |||
" Prepare, review and approve fuel inspection procedure. | |||
" Ensure proper training and qualification of personnel for sipping operations. | |||
* Determine if sipping for this age fuel will provide valid indications. | * Determine if sipping for this age fuel will provide valid indications. | ||
.0 Perform sipping operation on each fuel element to identify the presence of specific radioactive fission products." Where releases are acceptable, identify as such and return fuel to basket. Where sipping samples are unacceptable, identify as such for transfer to DFCs. Identification of damaged fuel should be consistent with ANSI N14.33-2005 and NRC ISG-1." Identify water level necessary to transfer fuel elements to DFCs/MPC in Cask Load Pool. If required, identify increased height requirements on SFP gates associated with this water level." Procure as required, gate extensions to increase gate height (see 4.2, Task IV below)." Raise the level of the pool water sufficient to allow for fuel element transfer to DFCs/MPC.4.2 Ul Infrastructure Modifications/Evaluations | .0 Perform sipping operation on each fuel element to identify the presence of specific radioactive fission products. | ||
-Unit 1 Proiect Team Responsibility Task I - | " Where releases are acceptable, identify as such and return fuel to basket. Where sipping samples are unacceptable, identify as such for transfer to DFCs. Identification of damaged fuel should be consistent with ANSI N14.33-2005 and NRC ISG-1. | ||
JohqnWhjte | " Identify water level necessary to transfer fuel elements to DFCs/MPC in Cask Load Pool. If required, identify increased height requirements on SFP gates associated with this water level. | ||
-dry cask project plan rev I (3).doc -Page 71 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 7 of 19* Review/approve sequence and handling plan.Task II -Consequence Analysis" Review/evaluate existing consequence analyses from other site(s) (e.g., River Bend)." Develop consequence analysis for all activities associated with removal, relocation and long-term storage of spent fuel. Address consequences of | " Procure as required, gate extensions to increase gate height (see 4.2, Task IV below). | ||
Transfer from Ul fuel-handling area to U2 FSB will be done using Low Profile Transporter (LPT) (see Task VII below) and the Transport Crawler utilized for similar activities for Units 2 and 3." Review/approve transport path evaluation." Prepare mod package for any changes needed to accommodate transport. | " Raise the level of the pool water sufficient to allow for fuel element transfer to DFCs/MPC. | ||
* Review/approve mod package.* Prepare work order to install any needed transport path changes.* Review/approve work order.* Procure materials needed to implement work order.* Implement work order to make any needed transport path changes.Task IV -West Fuel Pool Gate Modification (NOTE: Any necessary modifications should be completed prior to sipping and/or fuel element transfer to and placement into DFCs/MPCs.)" Prepare and approve, as required, mod package for increasing height of west fuel pool gates or use of seal plates." Prepare and approve work order package.* Procure material necessary to implement mod package.* Install modification. | 4.2 Ul Infrastructure Modifications/Evaluations - Unit 1 Proiect Team Responsibility Task I - ProcedureDevelopment and Training o Develop sequence and handling plan for all activities associated with removal, relocation and long-term storage of spent fuel. | ||
Task V -Unit 1 Fuel | |||
* Perform formal assessment of crane and intended applications relative to requirements of NUREG-0621 (Ref. 3) (Control of Heavy Loads) and NUREG-0554 (Single-Failure Proof Cranes). Assessment should address potential heavy load drop and effects (including offsite dose). Licensing effects should be considered." Review/approve crane assessment." Evaluate crane to determine any necessary maintenance and/or upgrades." Procure parts as necessary to perform upgrades." Develop test requirements for crane." Develop work order for maintenance and/or necessary upgrades.* Implement work order.* Perform load testing and other inspections per requirements. | JohqnWhjte - dry cask project plan rev I (3).doc -Page 71 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 7 of 19 | ||
Task VI -Unit 1 Fuel | * Review/approve sequence and handling plan. | ||
John White- -dry ask project plan, rev (3).doc | Task II - Consequence Analysis | ||
Task VII -Design, | " Review/evaluate existing consequence analyses from other site(s) (e.g., River Bend). | ||
* Install rail system.* Perform functional test of LPT system.4.3 Program Evaluations | " Develop consequence analysis for all activities associated with removal, relocation and long-term storage of spent fuel. Address consequences of UL1crane not being single failure proof including determination of additional requirements for not being single failure proof. | ||
-- Unit 1 Proiect Team Responsibility Task I - | " Review/approve consequence analysis. | ||
Task II - | Task Ill - TransportPath and FloorLoading Evaluation | ||
" Perform transport path evaluation including evaluation of floor loading at all locations along path. Evaluation should consider geometry of transfer cask and long-term storage container including stack up, ALARA (including ventilation, adequacy of existing rad monitoring), | |||
structural capabilities, buried/embedded utilities, load testing, licensing, etc. Data and design criteria for the transfer cask and long-term storage container should be provided by the vendor supplying the transfer casks and storage containers. Transfer from Ul fuel-handling area to U2 FSB will be done using Low Profile Transporter (LPT) (see Task VII below) and the Transport Crawler utilized for similar activities for Units 2 and 3. | |||
" Review/approve transport path evaluation. | |||
" Prepare mod package for any changes needed to accommodate transport. | |||
* Review/approve mod package. | |||
* Prepare work order to install any needed transport path changes. | |||
* Review/approve work order. | |||
* Procure materials needed to implement work order. | |||
* Implement work order to make any needed transport path changes. | |||
Task IV - West Fuel Pool Gate Modification (NOTE: Any necessary modifications should be completed prior to sipping and/or fuel element transfer to and placement into DFCs/MPCs.) | |||
" Prepare and approve, as required, mod package for increasing height of west fuel pool gates or use of seal plates. | |||
" Prepare and approve work order package. | |||
* Procure material necessary to implement mod package. | |||
* Install modification. | |||
Task V - Unit 1 Fuel HandlingArea Overhead Bridge Crane Review (NOTE: Any necessary upgrades should be completed prior to placement of the MPCs and load transfer casks into the Cask Load Pool. The intent of this activity is to assure that the overhead crane is refurbished/restored to its design capacity.) | |||
* Perform formal assessment of crane and intended applications relative to requirements of NUREG-0621 (Ref. 3) (Control of Heavy Loads) and NUREG-0554 (Single-Failure Proof Cranes). Assessment should address potential heavy load drop and effects (including offsite dose). Licensing effects should be considered. | |||
" Review/approve crane assessment. | |||
" Evaluate crane to determine any necessary maintenance and/or upgrades. | |||
" Procure parts as necessary to perform upgrades. | |||
" Develop test requirements for crane. | |||
" Develop work order for maintenance and/or necessary upgrades. | |||
* Implement work order. | |||
* Perform load testing and other inspections per requirements. | |||
Task VI - Unit 1 Fuel HandlingArea Cask Load Pool Clean out and Assessment | |||
" Pump down/clean out as required the Cask Load Pool. | |||
" Inspect/evaluate pool base to determine if any modifications are required to sustain loads from MPC and load transfer cask. | |||
I John White--dry ask project plan, rev (3).doc -~~ | |||
-.--. e qa Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 8 of 19 | |||
" If required, prepare/approve mod package for pool base or leveling plate. | |||
" If required, prepare/issue work order for pool base modifications or leveling plate installation. | |||
" As needed, procure parts for pool base modifications/leveling plate installation. | |||
" As needed, remove existing stand. | |||
" As needed, install stand for lift yoke (see 4.5, Task IV). | |||
* As needed, remove/replace step platform. | |||
* As needed, install impact limiters. | |||
" As needed, implement modification. | |||
Task VII - Design, Fabricationand Installationof Low Profile TransportSystem | |||
* Design Low Profile Transporter (LPT) system for transport of long-term storage container from Ul fuel handling area to location for transfer to transport crawler. | |||
" Prepare, review and approve LPT design modification for attachments to existing IPEC structures. | |||
" Fabricate LPT. | |||
" Receive/inspect LPT and rail system components for LPT. | |||
" Prepare/approve work order for rail system installation. | |||
* Install rail system. | |||
* Perform functional test of LPT system. | |||
4.3 Program Evaluations -- Unit 1 Proiect Team Responsibility Task I - Environmentaland Radiation ProtectionEvaluation | |||
" Evaluate environmental and radiation protection effects/requirements for all activities associated with removal, relocation and long-term storage of spent fuel. | |||
" Review/approve evaluation. | |||
Task II - 10CFR72.212 Evaluation | |||
" Prepare 50.59 evaluation. | |||
* Develop 72.212 evaluation. | * Develop 72.212 evaluation. | ||
* Review/approve 50.59 and 72.212 evaluations." Make preliminary contact with NRC during this process to develop consensus on need for license amendment. | * Review/approve 50.59 and 72.212 evaluations. | ||
Task Ill -Tech Spec and | " Make preliminary contact with NRC during this process to develop consensus on need for license amendment. | ||
* Review and evaluate effects on Unit 1 Technical Specification, OPS (and related)procedures for all activities associated with removal, relocation and long-term storage of spent fuel.0 Prepare/approve any Tech Spec changes. Submit for NRC review/approval. | Task Ill - Tech Spec and ProcedureEvaluation | ||
* Review and evaluate effects on Unit 1 Technical Specification, OPS (and related) procedures for all activities associated with removal, relocation and long-term storage of spent fuel. | |||
0 Prepare/approve any Tech Spec changes. Submit for NRC review/approval. | |||
0 Revise/approve OPS (and related) procedures. | 0 Revise/approve OPS (and related) procedures. | ||
Task IV -Emergency Plan Impact Evaluation" Evaluate potential impact on Emergency Plan for all activities associated with removal, relocation and long-term storage of spent fuel." Modify Emergency Plan as necessary. | Task IV - Emergency Plan Impact Evaluation | ||
* Approve changes to Emergency Plan (if such are needed).* Provide training on any changes to Emergency Plan.Task V- Security Plan Impact Evaluation | " Evaluate potential impact on Emergency Plan for all activities associated with removal, relocation and long-term storage of spent fuel. | ||
* Evaluate potential impact on Security Plan for all activities associated with removal, relocation and long-term storage of spent fuel." Modify Security Plan as necessary." Approve changes to Security Plan (if such are needed)." Provide training on any changes to Security Plan. | " Modify Emergency Plan as necessary. | ||
John | * Approve changes to Emergency Plan (if such are needed). | ||
.... ....s..pr. | * Provide training on any changes to Emergency Plan. | ||
...... | Task V- Security Plan Impact Evaluation | ||
* Evaluate potential impact on QA Plan for all activities associated with removal, relocation and long-term storage of spent fuel.Modify QA Plan as necessary. | * Evaluate potential impact on Security Plan for all activities associated with removal, relocation and long-term storage of spent fuel. | ||
* Approve changes to QA Plan (if such are needed).* Provide training on any changes to QA Plan.Task VII -Fire | " Modify Security Plan as necessary. | ||
* Approve changes to Fire Protection Plan (if such are needed)._t Provide training on any changes to Fire Protection Plan.4.4 ISFSI -- Unit 2 Project Team Responsibility Piepare design and perform construction of ISFSI. Activities to include assessment of associated licensing and operability issues.4.5 Fabrication and Procurement of Equipment | " Approve changes to Security Plan (if such are needed). | ||
-Unit 1 Proiect Team Responsibility Task I -DFC Design/Fabrication | " Provide training on any changes to Security Plan. | ||
* Perform feasibility study for use of DFCs (all or partial) based on cost effectiveness and risks." Determine use of DFCs (all or partial) based on feasibility study. If partial use identified as feasible, establish quantity required." Coincident with feasibility study, determine if licensing amendment required for either approach using DFCs (all DFCs or partial use of DFCs).* Prepare DFC design drawings including placement/arrangement within MPC; prepare procedure for transfer of DFCs into MPC and for transfer of fuel elements into DFCs within MPC." If licensing amendment required, DFC vendor to submit to NRC for review." Fabricate DFCs." Receive and inspect DFCs." Transport DFCs to Ul fuel handling area.Task II -Design and | |||
John White _qaskjýýqjeqt pjýq rev 1 (3).d9c: John........ .... . ... s..pr. ct.pla..rev.1. | |||
.. c.. - | |||
. ..... Paqe 9t Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 9 of 19 Task VI - QA Plan Impact Evaluation | |||
* Evaluate potential impact on QA Plan for all activities associated with removal, relocation and long-term storage of spent fuel. | |||
Modify QA Plan as necessary. | |||
* Approve changes to QA Plan (if such are needed). | |||
* Provide training on any changes to QA Plan. | |||
Task VII - Fire ProtectionPlan Impact Evaluation | |||
" Evaluate potential impact on Fire Protection Plan for all activities associated with removal, relocation and long-term storage of spent fuel. | |||
" Modify Fire Protection Plan as necessary. | |||
* Approve changes to Fire Protection Plan (if such are needed). | |||
_t Provide training on any changes to Fire Protection Plan. | |||
4.4 ISFSI -- Unit 2 Project Team Responsibility Piepare design and perform construction of ISFSI. Activities to include assessment of associated licensing and operability issues. | |||
4.5 Fabrication and Procurement of Equipment - Unit 1 Proiect Team Responsibility Task I - DFC Design/Fabrication | |||
* Perform feasibility study for use of DFCs (all or partial) based on cost effectiveness and risks. | |||
" Determine use of DFCs (all or partial) based on feasibility study. If partial use identified as feasible, establish quantity required. | |||
" Coincident with feasibility study, determine if licensing amendment required for either approach using DFCs (all DFCs or partial use of DFCs). | |||
* Prepare DFC design drawings including placement/arrangement within MPC; prepare procedure for transfer of DFCs into MPC and for transfer of fuel elements into DFCs within MPC. | |||
" If licensing amendment required, DFC vendor to submit to NRC for review. | |||
" Fabricate DFCs. | |||
" Receive and inspect DFCs. | |||
" Transport DFCs to Ul fuel handling area. | |||
Task II - Design and Fabricationof MPCs | |||
" Design MPCs including preparation of design drawings. | |||
* Prepare/submit license amendment. | |||
" Prepare procedures specifically for loading, sealing and handling of MPCs. | |||
" Review/approve fabricator's fabrication QA plan. | |||
* Arrange for fab shop QA inspection support. | |||
" Fabricate MPCs; provide fab shop QA inspection oversight. | |||
* Fabricate MPC simulator. | * Fabricate MPC simulator. | ||
.Receive and inspect MPCs." Receive and inspect MPC simulator." Transport MPCs to Unit 1 fuel handling area.Task III -Design and | . Receive and inspect MPCs. | ||
John White' -' dry cask project plan rev 1 (3).doc | " Receive and inspect MPC simulator. | ||
Specify requirements for load test of lift yoke." Prepare/approve plan for periodic inspection and testing of lift yoke.* Review/approve fabricator's fabrication QA plan." Arrange for fab shop QA inspection support." Fabricate lift yoke; provide fab shop QA inspection oversight." Perform/witness load test at fab shop or at site, as required." Receive and inspect lift yoke." Transfer lift yoke to Unit 1 fuel handling area Task V -Design, | " Transport MPCs to Unit 1 fuel handling area. | ||
* Review/approve fabricator's fabrication QA plan." Fabricate long-term storage containers on site; provide on-site QA inspection oversight." Transfer empty long-term storage containers to Unit 2 FSB.Task V1 -Develop License Amendment Request (LAR)o Prepare LAR for shortened Hi-Trac 100 system.4.6 Fuel Loading and Dry Cask Operations | Task III - Design and Fabricationof Transfer Cask (Hi-Trac) | ||
-- PS&O Dept Responsibility These efforts include transfer of spent fuel to DFCs/MPC, placement of the MPC and load transfer cask into the Unit 1 Cask Loading Pool, lifting the load transfer casks from the Unit 1 Cask Load Pool up to the Unit 1 fuel handling area deck (70' elev), transporting the load transfer cask to the Unit 2 FSB, performing an inter-cask transfer (stack-up) of the MPC from the load transfer cask (Hi-Trac) to the long-term storage cask and transporting the long-term storage cask to the IPEC ISFSI.Task I - | " Design load transfer cask. Prepare design drawings. | ||
,- Page 1_1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 11 of 19* Establish management oversight. | * Prepare/submit licensing amendment. | ||
Perform Task IVa or lVb depending on results of 4.5 Task I feasibility study above.Task IVa - | " Prepare procedures specifically for loading, sealing and handling load transfer casks. | ||
* Review/approve fabricator's fabrication QA plan. | |||
John White' -'dry cask project plan rev 1 (3).doc dy cak prjectplanrev JohnWhit (3)docPage Pa.ge 01o }1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 10 of 19 | |||
* Arrange for fab shop QA inspection support. | |||
" Fabricate load transfer casks; provide fab shop QA inspection oversight. | |||
" Receive and inspect transfer cask. | |||
Task IV - Design and Fabricationof Lift Yoke andAssociated Slings/Hardware | |||
" Design lift yoke for handling load transfer cask. Prepare design drawings including necessary slings/hardware. Specify requirements for load test of lift yoke. | |||
" Prepare/approve plan for periodic inspection and testing of lift yoke. | |||
* Review/approve fabricator's fabrication QA plan. | |||
" Arrange for fab shop QA inspection support. | |||
" Fabricate lift yoke; provide fab shop QA inspection oversight. | |||
" Perform/witness load test at fab shop or at site, as required. | |||
" Receive and inspect lift yoke. | |||
" Transfer lift yoke to Unit 1 fuel handling area Task V - Design, Fabricationand Placement of Empty Long-Term Storage Containers(e.g., Hi-Storm) | |||
" Design long-term storage containers (this will be extension of existing efforts for Units 2 and 3, for which fabrication of long-stem storage containers are already planned). | |||
" Prepare procedures specifically for loading, sealing and handling long-term storage containers. | |||
* Review/approve fabricator's fabrication QA plan. | |||
" Fabricate long-term storage containers on site; provide on-site QA inspection oversight. | |||
" Transfer empty long-term storage containers to Unit 2 FSB. | |||
Task V1 - Develop License Amendment Request (LAR) o Prepare LAR for shortened Hi-Trac 100 system. | |||
4.6 Fuel Loading and Dry Cask Operations -- PS&O Dept Responsibility These efforts include transfer of spent fuel to DFCs/MPC, placement of the MPC and load transfer cask into the Unit 1 Cask Loading Pool, lifting the load transfer casks from the Unit 1 Cask Load Pool up to the Unit 1 fuel handling area deck (70' elev), transporting the load transfer cask to the Unit 2 FSB, performing an inter-cask transfer (stack-up) of the MPC from the load transfer cask (Hi-Trac) to the long-term storage cask and transporting the long-term storage cask to the IPEC ISFSI. | |||
Task I - ProcedureDevelopment and Training | |||
" Develop procedures for dry cask handling. | |||
" Review/approve dry cask-handling procedures. | |||
" Develop training program for sequence and handling including dry cask handling. | |||
* Review/approve training program. | |||
* Perform classroom training. | |||
" Implement job performance measures (JPMs) and perform practical training. | |||
Task II - Dry Runs | |||
* Develop dry run plan. | |||
" Review/approve dry run plan. | |||
" Perform initial dry runs. | |||
" Perform NRC dry runs. | |||
" Raise SFP level in preparation for dry run. | |||
Task Ill - FinalPreparationsand Readiness Checks | |||
" Perform readiness checks. | |||
" Establish Infrequently Performed Tests and Evolutions (IPTE) requirements | |||
John *Wýe-dycask project plan revl(3).doc ,- Page 1_1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 11 of 19 | |||
* Establish management oversight. | |||
Perform Task IVa or lVb depending on results of 4.5 Task I feasibility study above. | |||
Task IVa - PartialTransferof Damaged Spent Fuel to DFCs/MPC | |||
" Ensure proper training and qualification of personnel prior to any fuel movement; this should include activities associated with transfer and placement of fuel elements into DFCs/M PC. | |||
" Move damaged fuel elements to the Cask Load Pool for transfer to DFCs/MPC. | |||
" Transfer remaining fuel elements to the Cask Load Pool for transfer to DFCs/MPC. | |||
Task IVb - Full Transferof Spent Fuel to DFCs/MPC 0 Ensure proper training and qualification of personnel prior to any fuel movement; this should include activities associated with transfer and placement of fuel elements into DFCs/MPC. | |||
. Transfer all fuel elements to Cask Load Pool. Load all fuel elements into DFCs/MPC. | |||
Task V - Placement of MPC and Load TransferCask into the Cask Load Pool | |||
" Prepare/review/approve fuel load plan that includes loading sequence. | |||
" Using the overhead crane, place one MPC into a load transfer cask and then into the Cask Load Pool. | |||
" Place empty DFCs (as appropriate) into MPC. | |||
" Transfer damaged and undamaged fuel elements from the Disassembly Pool and place into the MPC/Ioad transfer cask within the Cask Load Pool in accordance with the fuel load plan. | |||
* After MPC/load transfer cask is full, install MPC lid. | |||
* Lift the full MPC/load transfer cask onto the deck at 70' elevation in the Unit 1 fuel handling area and drain, dry and decontaminate the MPC in accordance with applicable procedures. | |||
Weld the MPC cover and fill MPC with inert gas in accordance with applicable procedures. | Weld the MPC cover and fill MPC with inert gas in accordance with applicable procedures. | ||
Task VI -Perform | Task VI - Perform Transportfrom U1 Cask Load Pool to IPEC ISFSI | ||
-- Unit 1 Proiect Team Responsibility Task I -Install | * Lift load transfer cask from IP1 cask load pool onto deck at 70' elev and place on LPT. | ||
* Move load transfer cask from Unit 1 fuel handling area using LPT. | |||
" Transfer load transfer cask from LPT to transport crawler; move crawler to U2 FSB on existing roadways. | |||
" Perform intercask transfer of MPC from load transfer cask to long-term storage container, using new U2 FSB gantry crane. | |||
" Load long-term storage container onto transport crawler. | |||
" Move loaded crawler to ISFSI on existing roadways and off-load long-term storage container onto concrete pad of ISFSI. | |||
" Implement all activities described above in the order given in the attached schedule to place the loaded long-term storage containers at the IPEC ISFSI. | |||
4.7 Miscellaneous Activities -- Unit 1 Proiect Team Responsibility Task I - Install PortableDemineralizerfor SFP | |||
" Design installation for portable demineralizer for SFP including selection of demineralizer. | |||
" Review/approve demineralizer installation. | |||
* Procure demineralizer and other components needed for installation. | * Procure demineralizer and other components needed for installation. | ||
* Receive/inspect demineralizer. | * Receive/inspect demineralizer. | ||
* Prepare mod package for installation of demineralizer." Review/approve mod package.* Prepare work order for installation of demineralizer." Review/approve work order." Implement work order for installation of demineralizer. | * Prepare mod package for installation of demineralizer. | ||
Task II -Install Backup Level | " Review/approve mod package. | ||
John VVhite dr y cask project pla n rev 1 (3). d 6 -C Page 13 !1 John White- dry cask project plan rev 1 (3).doc Page 13~j Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 13 of 19 7.0 References | * Prepare work order for installation of demineralizer. | ||
: 1. "Project Management," Procedure No. ENN-DC-114 Rev. 3, ENN Nuclear Management Manual, Entergy.2. "Engineering Work Management," Procedure No. ENN-DC-183 Rev. 1, ENN Nuclear Management Manual, Entergy.3. "Control of Heavy Loads at Nuclear Power Plants," NUREG-0612, USNRC, 1980.4. "Single-Failure-Proof Cranes for Nuclear Power Plants," NUREG-0554, USNRC, 1979.5. "Changes, Tests and Experiments," Section 50.59 of Part 50 (Domestic Licensing of Production and Utilization Facilities), Title 10 (NRC Regulations) of the Code of Federal Regulations. | " Review/approve work order. | ||
" Implement work order for installation of demineralizer. | |||
Task II - Install Backup Level IndicatorMonitoring System | |||
John White --drycask project plan rev1(3).doc Page'12r Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 12 of 19 | |||
" Design backup monitoring system including equipment selection. | |||
" Review/approve monitoring system design. | |||
" Procure monitoring system components. | |||
" Receive/inspect monitoring system components. | |||
" Prepare mod package for installation of backup monitoring system. | |||
" Review/approve mod package. | |||
" Prepare work order for installation of backup monitoring system. | |||
" Review/approve work order. | |||
" Implement work order for installation of backup monitoring system. | |||
Task Ill - Evaluationand PossibleModification of North Pool Surfaces | |||
" Inspect the walls of the three north pools (Failed Fuel Pool, Disassembly Pool, Cask Load Pool). | |||
" Based on inspection results, identify as needed coatings to eliminate leakage during flood-up of pools prior to spent fuel transfer from SFP. | |||
" Procureiinstall coatings as needed. | |||
Task IV - Floodup and Remove North Gate | |||
* Upon completion of Task Ill actions, flood up the three north pools to required level. | |||
" Remove north gate separating SFP with Disassembly Pool. | |||
5.0 Cost A table of costs is provided in Attachment D. | |||
6.0 Schedule Project schedule is provided in Attachment E. | |||
John VVhite dr y cask project pla n rev 1 (3). d 6-C Page 13 !1 John White- dry cask project plan rev 1 (3).doc Page 13~j Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 13 of 19 7.0 References | |||
: 1. "Project Management," Procedure No. ENN-DC-114 Rev. 3, ENN Nuclear Management Manual, Entergy. | |||
: 2. "Engineering Work Management," Procedure No. ENN-DC-183 Rev. 1, ENN Nuclear Management Manual, Entergy. | |||
: 3. "Control of Heavy Loads at Nuclear Power Plants," NUREG-0612, USNRC, 1980. | |||
: 4. "Single-Failure-Proof Cranes for Nuclear Power Plants," NUREG-0554, USNRC, 1979. | |||
: 5. "Changes, Tests and Experiments," Section 50.59 of Part 50 (Domestic Licensing of Production and Utilization Facilities), Title 10 (NRC Regulations) of the Code of Federal Regulations. | |||
: 6. "Conditions of General License Issued Under §72.210," Section 72.212 of Part 72 (Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste), Title 10 (NRC Regulations) of the Code of Federal Regulations. | : 6. "Conditions of General License Issued Under §72.210," Section 72.212 of Part 72 (Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste), Title 10 (NRC Regulations) of the Code of Federal Regulations. | ||
: 7. "Changes, Tests and Experiments," Section 72.48 of Part 72 (Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste), Title 10 (NRC Regulations) of the Code of Federal Regulations. | : 7. "Changes, Tests and Experiments," Section 72.48 of Part 72 (Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste), Title 10 (NRC Regulations) of the Code of Federal Regulations. | ||
: 8. "Storage and Transport of Damaged Spent Nuclear Fuel," ANSI N14.33-2005. | : 8. "Storage and Transport of Damaged Spent Nuclear Fuel," ANSI N14.33-2005. | ||
: 9. "Damaged Fuel," ISG-1, Rev. 1, Spent Fuel Project Office, Interim Staff Guidance, NRC.10. Project Plan, IPEC Spent Fuel Dry Cask Storage, Project #5C0044 (Unit 2 FSB mods and site ISFSI pad) and Project #6C0294 (Unit 3 FSB mods).11. "Cladding Considerations for the Transportation and Storage of Spent Fuel," ISG-1 1, Rev. 3, Spent Fuel Project Office, Interim Staff Guidance, NRC. | : 9. "Damaged Fuel," ISG-1, Rev. 1, Spent Fuel Project Office, Interim Staff Guidance, NRC. | ||
John W hite -'dr-yca--s'k-- | : 10. Project Plan, IPEC Spent Fuel Dry Cask Storage, Project #5C0044 (Unit 2 FSB mods and site ISFSI pad) and Project #6C0294 (Unit 3 FSB mods). | ||
p-roje-c-t plan -re-v-_l-(3).doc | : 11. "Cladding Considerations for the Transportation and Storage of Spent Fuel," ISG-1 1, Rev. 3, Spent Fuel Project Office, Interim Staff Guidance, NRC. | ||
-1 Page-1411 John White-dry cask project plan revi (3).doc Page 141f Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT A 3/29/06 Page 14 of 19 Project Organization Chart 4 t John White -dry cask project plan rev 1 (3).doc page 15 Joh Wh te -dry cask project plan rev ...... .... . | |||
..... ..j l5 | John W hite -'dr-yca--s'k-- p-roje-c-t plan -re-v-_l-(3).doc-1 Page-1411 John White-dry cask project plan revi (3).doc Page 141f Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT A 3/29/06 Page 14 of 19 Project Organization Chart 4 | ||
Move | t | ||
John White - dry cask project plan rev 1 (3).doc page 15 Joh Wh te - dry cask project plan rev 1 (3).....d.............. .... . i i.. .... . .... .. j l5 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT B 3/29/06 Page 15 of 19 Move transfer casks to U2; Eventual transfer of fuel transfer MPCs from transfer casks to IPEC ISFSI (using to long-term storage containers I MPCs, transfer casks, long-term storage containers) Move long-term storage containers to IPEC ISFSI | |||
II6. Move loaded long-term storage container to ISFSI failed fuel pool using transport crawler.Ul SFP I /crawler with 7 Off-load long-term storage container onto concrete disassembly long-term storageco 1 -1; ~nntIninr pad. | |||
John White -dry cask project plan rev 1 (3).doc w_:- | |||
-design, license-implementation | Page 16r1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT C 3/29/06 Page 16 of 19 U2 FSB Major activities along transfer path: | ||
: 6) LPT System -designrfabrication/installation | U2 fuel 1. Transfer fuel element from SFP to pool DFC/MPO/transfer cask in cask load pool using 75-ton overhead crane. | ||
: 11) Fuel loading/handling (40K wk x 4 wks/cask x 5 casks)12) Install new monitoring wells Total John White -rv cask DrojeCt Dian rev 1 (3) oc Pagle 18 !1 John White | : 2. Drain, dry and seal weld transfer cask. Move transfer cask to LPT using 75-ton overhead crane. | ||
SJoh oWbie--dry cask project plan revl -(3).doc-i Page 19!R. | : 3. Move transfer cask to transport crawler using LPT. | ||
:John White- Unit 1 Dry Cask Siorage Lev-el i.doc Page 21 iD Task Name Durationi Start Finsh 2006 2007 | : 4. Move transfer cask to U2 FSB using transport crawler. | ||
& Llcense anmendment (Hi 459 days Tue 11/2210S1 Fri 8/24/01 93 Consequence Pialysis (Peloquln) 384 days Tue 11/22/0I M Fri 5111/01 104 i HAJL Pl EV..UAnIONS (Henries) i172 days Fril 127/0(. Won9/2S/06 9 137 West Pool Gate Modifications (Henries) 181 days Fri 1/27/0(, Fri 10/6/0i 162 'CONCRETE FLOOR EL 70-6 CA.CULAION (Henries) i135 days otn 2/20M06 Fri &25/0(169 i Environmental | SiigntyI] 5. Transfer MPC from transfer cask to long-term 75-ton brdge crane c storage container using U2 gantry crane for intercask transfer (stack-up). | ||
&Rad evaluation (English) 120 days Fri 9/8/0f. Thu 2/22/07 I 172__ LPT Syslem Design, Fabrication | II6. Move loaded long-term storage container to ISFSI failed fuel pool using transport crawler. | ||
& Mod (Henries) 339 days Lon 2/20/06j Thu 6/710?216 72.212 Evaluation Report (Stewart) m 351 days Thu 3/16/061 Thu 7M19/07 226 Cask Load Pool deanout, evd &Mod(Hernries) 291days Thu 1M5S j Thu 2J15/07 | Ul SFP I /crawler with 7 Off-load long-term storage container onto concrete disassembly long-term storageco 1 -1; ~nntIninr pad. | ||
S0days Won 6/25/071 Fri 10/12101 -293 Final Preps and Readiness Checks (Peloquin) 20 days Thu W20/07i Wed 10/17/07 -297 Load, Process and Transfer Fuel to ISFSI (PS80) 50 days Thu 10f18/O7i Wed 12t2607 -303 Contaninallon Control (Donegan) iISdays Won 1115/071 Fri 6/22/01 312 Restore SF bulldlng Operating loor(Donegan) 287days Won6/26/06i Tue 7/31/07 320 'Receipt & Fit-up (Peloquln) 154 days Tue 1/2/071 Fri 8/3/01 i 325 PoolDrainDown 120days Thu"12f27/071 Wed6/lV08 I I}} | |||
Page 17 II I | |||
ýJohn White-dry | |||
ýoh n ýýý cask project plan 4ýy -ýý rey 1 (3).doc plan rev _.,.page 17 11 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT D 3/29/06 Page 17 of 19 COST ESTIMATES | |||
*1* | |||
Category | |||
: 1) DFC's - design, license, fabricate | |||
+ 4-2} Hi-Trac/HDWE- design, license, procedure | |||
- fabrication 4- + | |||
: 3) MPC-32 Canisters (5) 1- 1- | |||
: 4) Hi-Storm Overpacks (5) 4- 4- | |||
: 5) Facility Evaluations/Mods - design, license | |||
- implementation 4- 4- | |||
: 6) LPT System - designrfabrication/installation I-1 | |||
: 7) Consequence analysis program | |||
: 8) Pool cleanout | |||
: 9) Mockup simulator | |||
: 10) Training and procedures | |||
: 11) Fuel loading/handling (40K wk x 4 wks/cask x 5 casks) | |||
: 12) Install new monitoring wells Total | |||
John White - rv cask DrojeCt Dian rev 1 (3) oc Pagle 18 !1 John White dry cask oroiect olan rev 1 (3~.doc Paae lad Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT E 3/29/06 Page 18 of 19 SCHEDULE (effective 3/29106) | |||
SJoh oWbie--dry cask project plan revl -(3).doc-i Page 19! | |||
R los. .nd Storag. of SpentFuel R.Iooj, Ironýthe IPECUnit I SpentFool Pool Prol.d Pt." | |||
ATTACHMENT E P=9.106 page I"o 19 | |||
SJoh White --UnitlDry Cask Storage Level Il.doc Page 1 Ii Unit 1 Dry Cask Storage & Pool Drain Down Level II Schedule | |||
:John White- Unit 1 Dry Cask Siorage Lev-el i.doc Page 21 iD ID__ 0 Task Name Name Durationi Start | |||
[ Finsh | |||
_ Ctr3TOtr4 2006 1trl 2007 C1r2 Otr3 Ctr441rl tr2 1Otr31r4 2008 1ir1 14 Hollech Licensing Anmendment (Peloquin) 387 days Tue 11/22/05 ! Wed 5/16/07 20 Design & Fabrication 434 days Tue 111/1iS/i Fri 7W13/01 21 DFC & Fabrication (Peloquin) 412 days Tue 11115/05i Wed 6/1307 28 WC, HITrac &ancill Eq. Fab (Peloquin) 429 days Tue 11/22J05i Frl 7113/01 44 Hi Storm fabrication (Peloquln) 225 days Won6/5/06 Fri 4/13/010 48 Overhead Crane Refu rbishment &Llcense anmendment (Hi 459 days Tue 11/2210S1 Fri 8/24/01 93 Consequence Pialysis (Peloquln) 384 days Tue 11/22/0I M Fri 5111/01 104 i HAJL Pl EV..UAnIONS (Henries) i172 days Fril 127/0(. Won9/2S/06 9 | |||
137 West Pool Gate Modifications (Henries) 181 days Fri 1/27/0(, Fri 10/6/0i 162 'CONCRETE FLOOR EL 70-6 CA.CULAION (Henries) i135 days otn 2/20M06 Fri &25/0( | |||
169 i Environmental &Rad evaluation (English) 120 days Fri 9/8/0f. Thu 2/22/07 I 172__ LPT Syslem Design, Fabrication &Mod (Henries) 339 days Lon 2/20/06j Thu 6/710? | |||
216 72.212 Evaluation Report (Stewart) m 351 days Thu 3/16/061 Thu 7M19/07 226 Cask Load Pool deanout, evd &Mod(Hernries) 291days Thu 1M5S j Thu 2J15/07 j236 i North Pool Eval &Coating (Donegan) 210days MOn6/15/06 Fri 4ro/07 247 jNorth Pool Clean out (Donegan) 165 days Lon 3/27/06 Fri 1110/08 " | |||
255 E-PlanImpactevduatlon (Engilsh) i 170days Won 6/19/061 Fri 2/01i 260 'Fire Prolection Plan Impact evatuation (English) 170 days Won 6/19/06 Fri 2/9/07 265 Security Plan Iact evaluation (English) 170 days Won 6/9/061 Fri 2&/01 270 QAplan Impact evaluation (McCann) 140 days Won /19/06i Fri 12/29010 274 Sequence mad Handling Plan (Miter) 80 days Won 3WD/06 Fri 6/23/0( | |||
279 Training & Procedures (PS&O) 320 days Won 6/26/06 1 Fri 9/14/01 - | |||
288 Dryf8uns(PS&0) S0days Won 6/25/071 Fri 10/12101 - | |||
293 Final Preps and Readiness Checks (Peloquin) 20 days Thu W20/07i Wed 10/17/07 - | |||
297 Load, Process and Transfer Fuel to ISFSI (PS80) 50 days Thu 10f18/O7i Wed 12t2607 - | |||
303 Contaninallon Control (Donegan) iISdays Won 1115/071 Fri 6/22/01 312 Restore SF bulldlng Operating loor(Donegan) 287days Won6/26/06i Tue 7/31/07 320 'Receipt & Fit-up (Peloquln) 154 days Tue 1/2/071 Fri 8/3/01 i 325 PoolDrainDown 120days Thu"12f27/071 Wed6/lV08 I I}} |
Latest revision as of 04:23, 23 March 2020
ML061860449 | |
Person / Time | |
---|---|
Site: | Indian Point ![]() |
Issue date: | 04/28/2006 |
From: | Jones T Entergy Corp |
To: | Jason White NRC Region 1 |
References | |
FOIA/PA-2006-0195 | |
Download: ML061860449 (23) | |
Text
John W**te - F-: Submittal to NRC A9-ALPae From: IIJo024s, T. R." <tjones2@entergy.com>
To: <jrw 1 @nrc.gov>
Date: 4/28 /06 4:40PM
Subject:
FW: Submittal to NRC From: Hinrichs, Gary H Sent: Friday, April 28, 2006 4:25 PM To: Jones, T. R.
Subject:
Submittal to NRC As per our Tuesday Conference call we promised a Unit 1 Dry Cask Storage plan and schedule.
<<dry cask project plan rev 1 (3).doc>> <<Unit 1 Dry Cask Storage Level II.doc>>
CC: <jdn@nrc.gov>
0-'ý ý
John Wbite - TFXT.htm Page 1 I' W I ie... T X ...
John....... .. . . .. . . .... = r** ? *
- r j* . .j.. r* .. . . . ~* *. . = ..
- Paqe l if From: Hinrichs, Gary H Sent: Friday, April 28, 2006 4:25 PM To: Jones, T. R.
Subject:
Submittal to NRC As per our Tuesday Conference call we promised a Unit 1 Dry Cask Storage plan and schedule.
<<dry cask project plan rev 1 (3).doc>> <<Unit 1 Dry Cask Storage Level Il.doc>>
John White - dry cask project plan rev 1 (3).doc Page 1illI11 J6h~Wiiite -dry cask project plan rev 1 (3).doc Page Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 1 of 19 PROJECT PLAN for Project No.:
Project
Description:
Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool NOTE: This ProjectPlan is a revision of an earlierplan issued in August, 2005, that addressedSFP clean up and fuel inspection only. I Prepared:
Signature Ul DCS Project Mgr Date Concurrence:
Signature U2 DCS Project Mgr Date Concurrence:
Signature PS&O Dept Mgr Date Concurrence:
Signature Operations Mgmnt Date Concurrence:
Signature Licensing Mgmnt Date Concurrence:
Signature Rad Pro Superintendent Date Concurrence:
Signature Rx. Engineering Supv. Date Concurrence:
Signature Fuels Engineer Date Concurrence:
Signature U1 Dept. Mgr Date Approved:
Signature Management Sponsor Date
John White - ,,q.ask project John.White. dry.cask.project.pl....e.......... Page 2 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 2 of 19 SAFETY FOCUS STATEMENT Safety will be focused on at all times during every phase and every activity of the Unit 1 Dry Cask Storage Project activities. This includes industrial safety (electrical safety, hazardous material and chemical handling, rigging, etc.), nuclear safety and radiological safety.
- Every meeting will start with a discussion of safety and human performance.
" Operating experience will be used for project planning and on an on-going basis.
- Field activities will have daily pre-job briefings including discussions on safety, human performance error traps and operating experience.
- Field activities will be closely monitored by supervision.
- The Corrective Action Program will be fully utilized.
- Project self-assessments and surveillances will be performed periodically and will include safety and human performance as assessment areas.
JonWu. e ak
.... rjc pa e 3.dcPg 3 ri John White - dry cask project_ plan. rev 1 (3).doc Page3 I Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 3 of 19 Table of Contents 1.0 Problem Definition 4 2.0 Proiect Obiectives 4 3.0 Alternatives Considered 4 3.1 Spent Fuel Entombment 4 3.2 Spent Fuel Relocation to East Pool 5 3.3 Spent Fuel Transfer 5 4.0 Action Plan 6 4.1 Spent Fuel Inspection -- Unit 1 Proiect Team Responsibility 6 4.2 Ul Infrastructure Modifications/Evaluations -- Unit 1 Proiect Team Responsibility 7 4.3 Program Evaluations -- Unit 1 Proiect Team Responsibility 8 4.4 ISFSI -- Unit 2 Proiect Team Responsibility 9 4.5 Fabrication and Procurement of Equipment - Unit 1 Proiect Team Responsibility 9 4.6 Fuel Loading and Dry Cask Operations -- PS&O Dept Responsibility 10 4.7 Miscellaneous Activities -- Unit 1 Project Team Responsibility 11 5.0 Cost 12 6.0 Schedule 12 7.0 References 13 Attachments A. Project Organization Chart 14 B. Project Flow Chart 15 C. Sketch of Transfer Path Activities 16 D. Cost Estimates 17 E. Schedule 18
Pacle 411 John
ýRhIWNP7ý!`Y cask project White dry cask plan rev 1 (3).doc projeýtýpLpýeyj_(3).qqq Page 4 I Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 4 of 19 1.0 Problem Definition Leakage is occurring from the Unit 1 Spent Fuel Pool (SFP'). Remediation of this condition can be accomplished by various options, including dry entombment of the spent fuel within the SFP, relocation of the spent fuel to another pool, or transfer of the spent fuel to dry cask storage at the new IPEC Independent Spent Fuel Storage Installation (ISFSI). This latter option has been determined to be the most prudent course of action such that *this project plan primarily focuses on spent fuel removal/storage and ancillary activities. However, the options of dry entombment and relocation to another pool are also reviewed to capture the considerations that led to the selected method of long-term storage.
A project organization chart for this effort is presented in Attachment A.
2.0 Project Objectives This project is intended to prepare for and execute the offloading of the Unit 1 spent fuel from the SFP to dry cask storage and subsequent movement to the ISFSI. Major activities of this effort include fuel3 element inspection (completed 2), placement of fuel elements into individual Damaged Fuel Containers (DFCs) as needed, transfer/placement of fuel elements and/or DFCs into Multi Purpose Canisters (MPCs), placement of MPCs into transfer casks, movement of transfer casks to the Unit 2 Fuel Storage Building (FSB), intercask transfer of the MPCs to long-term storage containers and movement/placement of long-term storage containers to the ISFSI. A simplified flow chart of these activities is presented in Attachment B. A sketch of the primary transfer path activities is shown in Attachment C.
A separate project plan will be developed describing the activities associated with the subsequent drain down and desludging of the SFP.
3.0 Alternatives Considered 3.1 Spent Fuel Entombment Entombment would be part of a shielded pool storage plan that involves covering the west fuel pool with 2.5-foot thick concrete shielding and then draining the pool to eliminate leakage. This has the advantage of leaving the fuel in place until overall IPEC decommissioning occurs. The primary disadvantage is that the somewhat unique nature of this storage method would require regulatory approval including the potential for public hearings. Preliminary review has indicated the technical feasibility of this approach.
Spent fuel entombment in the SFP has been determined by the project to be non-viable based on licensing uncertainties and associated time considerations.
3.2 Spent Fuel Relocation to East Pool Relocation of the spent fuel to the east pool would involve establishing the east pool as a viable Also referred to herein as the west fuel pool.
2 Fuel inspections performed demonstrated structural integrity (i.e., no hairline cracks, pin hole leaks, etc.);
although necessary, this is not fully sufficient to demonstrate that the fuel is intact per ISG-1 and ANSI M14.33.
1 A damaged fuel container is specifically designed to contain a single fuel assembly with known or suspected defects, such as ruptured, severed or cracked fuel rods.
Paqe5 ~I Whites John White-
.- dry dr_y -cask, p!;ýq_!qy 1 pFgject_ P!4rL~Y cask project I (3).doc (3).doc *Page5S1l Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 5 of 19 storage location, transferring the fuel and then draining the west fuel pool to eliminate leakage.
Some of the actions in 3.3 below would also likely be required for this option. The primary advantage of this option is that the east pool was originally designed for spent fuel storage such that design intent would be unchanged with little or no licensing impact. Disadvantages are based in part on already-completed inspections of the east pool indicating that the pool surfaces (walls and floor) would require repair/recoating. Additionally, a new gate would be required to facilitate fuel transfer between the west and east pools. These modifications would only provide for an approximate 10-year life after which either further repairs (primarily recoating) would be required or the fuel would be relocated generally consistent with 3.3 below.
Spent fuel relocation to the east pool has been determined by the project to be non-viable due to economic considerations and the relatively short (10 year) service life of this option.
3.3 Spent Fuel Transfer A direct transfer of Unit 1 spent fuel to dry cask storage would require the addition of significant infrastructure that currently does not exist. Two alternative approaches each involve transfer of the spent fuel to the Unit 2 Fuel Handling Building.
Option A: Transfer the spent fuel to a wet intra-unit transport cask, move this cask to the Unit 2 Fuel Handling Building and offload the Unit 1 spent fuel into the Unit 2 spent fuel pool. The Unit 1 spent fuel could then be transferred to dry cask storage at a later time. This option would require a site licensing amendment.
Spent fuel transfer to the Unit 2 spent fuel pool has been determined by the project to be non-viable based on licensing, economic and Unit 2 operational considerations.
Option B: Transfer the spent fuel to a dry transfer cask, move the cask to the Unit 2 Fuel Handling Building where a new gantry crane would be used to perform an inter-cask transfer (i.e.,
stack-up) of the MPC to the long-term storage container, which would then be moved to the ISFSI.
Option B has been determined by the project to be the preferred option for transfer of spent fuel from the Unit 1 SFP. This conclusion has been reached by general considerations of timeliness, economics, effects on Unit 2/3 operations and licensing. Relative to licensing in particular, dry cask storage within an outdoor ISFSI is an established industry approach for providing long-term storage capacity. The approach has been implemented successfully both at Entergy plants and at other nuclear facilities. 10CFR72 ("Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste") grants a General License for owning and operating an ISFSI to all holders of a Part 50 power reactor operating license provided the licensee satisfies various conditions given within 10CFR72. Various dry cask vendors have obtained NRC approval for their storage systems, receiving an approved final safety analysis report and certificate of compliance. This documentation is one of the elements of the written report required by 10CFR72.212.
A subset of the Option B process involves DFCs, for which a feasibility study is needed to establish whether full or partial use of DFCs is appropriate.
4.0 Action Plan
John White - dry caskproject plan rev 1 (3).doc Page 6*
John White dry cask project plan rev 1 (3).doc Page 611 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 6 of 19 NOTE: There is currently a separateproject underway involving transfer of spent fuel to dry cask storage from Units 2 and 3. Some of the same equipment to be used for the Units 2 and 3 efforts can be used for the Unit 1 efforts. Additionally, portions of the Unit 1 plan describedbelow involve regions of Unit 2. As a result, close coordination between these two projects should be maintained to maximize efficiency of equipment use and complimentaryactivities and to minimize duplication of effort.
The activities described in this action plan will fall under the responsibility of the Unit 1 dry cask storage team, the Unit 2 dry cask storage team or the Planning, Scheduling and Outage Management Department (PS&0). Specific responsibility for each activity below is identified in the heading for each item.
Current efforts include use of Holtec casks and equipment for much of the transfer/storage process.
Reference herein to the load transfer cask and long-term storage containers are equivalent to Holtec HI-TRAC 100 Version D Transfer Cask and HI-STORM 100S Overpack, respectively. Sequencing of activities described below should be in accordance with the attached schedule (see Section 6.0).
4.1 Spent Fuel Inspection -- Unit I Proiect Team Responsibility Prior to initiation of the tasks described below, an ALARA plan should be prepared, reviewed and approved that addresses all aspects of SFP spent fuel assembly inspection.
Task I - Fuel Inspection (to be performed by sipping, if deemed necessary,based on feasibility study - see 4.5, Task I below)
" Identify equipment/hardware needed to support fuel inspection. Procure such items as required and in a timely manner to support SFP inspection. For existing tools needed to lift the fuel bundles from the baskets, tool refurbishment may be required.
- Identify water level necessary to facilitate fuel inspection via sipping. If required, identify increased height requirements on SFP gates associated with this water level.
- Procure as required, gate extensions to increase gate height (see 4.2, Task IV below).
" Raise the level of the pool water sufficient to allow for fuel inspection via sipping.
" Prepare, review and approve fuel inspection procedure.
" Ensure proper training and qualification of personnel for sipping operations.
- Determine if sipping for this age fuel will provide valid indications.
.0 Perform sipping operation on each fuel element to identify the presence of specific radioactive fission products.
" Where releases are acceptable, identify as such and return fuel to basket. Where sipping samples are unacceptable, identify as such for transfer to DFCs. Identification of damaged fuel should be consistent with ANSI N14.33-2005 and NRC ISG-1.
" Identify water level necessary to transfer fuel elements to DFCs/MPC in Cask Load Pool. If required, identify increased height requirements on SFP gates associated with this water level.
" Procure as required, gate extensions to increase gate height (see 4.2, Task IV below).
" Raise the level of the pool water sufficient to allow for fuel element transfer to DFCs/MPC.
4.2 Ul Infrastructure Modifications/Evaluations - Unit 1 Proiect Team Responsibility Task I - ProcedureDevelopment and Training o Develop sequence and handling plan for all activities associated with removal, relocation and long-term storage of spent fuel.
JohqnWhjte - dry cask project plan rev I (3).doc -Page 71 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 7 of 19
- Review/approve sequence and handling plan.
Task II - Consequence Analysis
" Review/evaluate existing consequence analyses from other site(s) (e.g., River Bend).
" Develop consequence analysis for all activities associated with removal, relocation and long-term storage of spent fuel. Address consequences of UL1crane not being single failure proof including determination of additional requirements for not being single failure proof.
" Review/approve consequence analysis.
Task Ill - TransportPath and FloorLoading Evaluation
" Perform transport path evaluation including evaluation of floor loading at all locations along path. Evaluation should consider geometry of transfer cask and long-term storage container including stack up, ALARA (including ventilation, adequacy of existing rad monitoring),
structural capabilities, buried/embedded utilities, load testing, licensing, etc. Data and design criteria for the transfer cask and long-term storage container should be provided by the vendor supplying the transfer casks and storage containers. Transfer from Ul fuel-handling area to U2 FSB will be done using Low Profile Transporter (LPT) (see Task VII below) and the Transport Crawler utilized for similar activities for Units 2 and 3.
" Review/approve transport path evaluation.
" Prepare mod package for any changes needed to accommodate transport.
- Review/approve mod package.
- Prepare work order to install any needed transport path changes.
- Review/approve work order.
- Procure materials needed to implement work order.
- Implement work order to make any needed transport path changes.
Task IV - West Fuel Pool Gate Modification (NOTE: Any necessary modifications should be completed prior to sipping and/or fuel element transfer to and placement into DFCs/MPCs.)
" Prepare and approve, as required, mod package for increasing height of west fuel pool gates or use of seal plates.
" Prepare and approve work order package.
- Procure material necessary to implement mod package.
- Install modification.
Task V - Unit 1 Fuel HandlingArea Overhead Bridge Crane Review (NOTE: Any necessary upgrades should be completed prior to placement of the MPCs and load transfer casks into the Cask Load Pool. The intent of this activity is to assure that the overhead crane is refurbished/restored to its design capacity.)
- Perform formal assessment of crane and intended applications relative to requirements of NUREG-0621 (Ref. 3) (Control of Heavy Loads) and NUREG-0554 (Single-Failure Proof Cranes). Assessment should address potential heavy load drop and effects (including offsite dose). Licensing effects should be considered.
" Review/approve crane assessment.
" Evaluate crane to determine any necessary maintenance and/or upgrades.
" Procure parts as necessary to perform upgrades.
" Develop test requirements for crane.
" Develop work order for maintenance and/or necessary upgrades.
- Implement work order.
- Perform load testing and other inspections per requirements.
Task VI - Unit 1 Fuel HandlingArea Cask Load Pool Clean out and Assessment
" Pump down/clean out as required the Cask Load Pool.
" Inspect/evaluate pool base to determine if any modifications are required to sustain loads from MPC and load transfer cask.
I John White--dry ask project plan, rev (3).doc -~~
-.--. e qa Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 8 of 19
" If required, prepare/approve mod package for pool base or leveling plate.
" If required, prepare/issue work order for pool base modifications or leveling plate installation.
" As needed, procure parts for pool base modifications/leveling plate installation.
" As needed, remove existing stand.
" As needed, install stand for lift yoke (see 4.5, Task IV).
- As needed, remove/replace step platform.
- As needed, install impact limiters.
" As needed, implement modification.
Task VII - Design, Fabricationand Installationof Low Profile TransportSystem
- Design Low Profile Transporter (LPT) system for transport of long-term storage container from Ul fuel handling area to location for transfer to transport crawler.
" Prepare, review and approve LPT design modification for attachments to existing IPEC structures.
" Fabricate LPT.
" Receive/inspect LPT and rail system components for LPT.
" Prepare/approve work order for rail system installation.
- Install rail system.
- Perform functional test of LPT system.
4.3 Program Evaluations -- Unit 1 Proiect Team Responsibility Task I - Environmentaland Radiation ProtectionEvaluation
" Evaluate environmental and radiation protection effects/requirements for all activities associated with removal, relocation and long-term storage of spent fuel.
" Review/approve evaluation.
Task II - 10CFR72.212 Evaluation
" Prepare 50.59 evaluation.
- Develop 72.212 evaluation.
- Review/approve 50.59 and 72.212 evaluations.
" Make preliminary contact with NRC during this process to develop consensus on need for license amendment.
Task Ill - Tech Spec and ProcedureEvaluation
- Review and evaluate effects on Unit 1 Technical Specification, OPS (and related) procedures for all activities associated with removal, relocation and long-term storage of spent fuel.
0 Prepare/approve any Tech Spec changes. Submit for NRC review/approval.
0 Revise/approve OPS (and related) procedures.
Task IV - Emergency Plan Impact Evaluation
" Evaluate potential impact on Emergency Plan for all activities associated with removal, relocation and long-term storage of spent fuel.
" Modify Emergency Plan as necessary.
- Approve changes to Emergency Plan (if such are needed).
- Provide training on any changes to Emergency Plan.
Task V- Security Plan Impact Evaluation
- Evaluate potential impact on Security Plan for all activities associated with removal, relocation and long-term storage of spent fuel.
" Modify Security Plan as necessary.
" Approve changes to Security Plan (if such are needed).
" Provide training on any changes to Security Plan.
John White _qaskjýýqjeqt pjýq rev 1 (3).d9c: John........ .... . ... s..pr. ct.pla..rev.1.
.. c.. -
. ..... Paqe 9t Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 9 of 19 Task VI - QA Plan Impact Evaluation
- Evaluate potential impact on QA Plan for all activities associated with removal, relocation and long-term storage of spent fuel.
Modify QA Plan as necessary.
- Approve changes to QA Plan (if such are needed).
- Provide training on any changes to QA Plan.
Task VII - Fire ProtectionPlan Impact Evaluation
" Evaluate potential impact on Fire Protection Plan for all activities associated with removal, relocation and long-term storage of spent fuel.
" Modify Fire Protection Plan as necessary.
- Approve changes to Fire Protection Plan (if such are needed).
_t Provide training on any changes to Fire Protection Plan.
4.4 ISFSI -- Unit 2 Project Team Responsibility Piepare design and perform construction of ISFSI. Activities to include assessment of associated licensing and operability issues.
4.5 Fabrication and Procurement of Equipment - Unit 1 Proiect Team Responsibility Task I - DFC Design/Fabrication
- Perform feasibility study for use of DFCs (all or partial) based on cost effectiveness and risks.
" Determine use of DFCs (all or partial) based on feasibility study. If partial use identified as feasible, establish quantity required.
" Coincident with feasibility study, determine if licensing amendment required for either approach using DFCs (all DFCs or partial use of DFCs).
- Prepare DFC design drawings including placement/arrangement within MPC; prepare procedure for transfer of DFCs into MPC and for transfer of fuel elements into DFCs within MPC.
" If licensing amendment required, DFC vendor to submit to NRC for review.
" Fabricate DFCs.
" Receive and inspect DFCs.
" Transport DFCs to Ul fuel handling area.
Task II - Design and Fabricationof MPCs
" Design MPCs including preparation of design drawings.
- Prepare/submit license amendment.
" Prepare procedures specifically for loading, sealing and handling of MPCs.
" Review/approve fabricator's fabrication QA plan.
- Arrange for fab shop QA inspection support.
" Fabricate MPCs; provide fab shop QA inspection oversight.
- Fabricate MPC simulator.
. Receive and inspect MPCs.
" Receive and inspect MPC simulator.
" Transport MPCs to Unit 1 fuel handling area.
Task III - Design and Fabricationof Transfer Cask (Hi-Trac)
" Design load transfer cask. Prepare design drawings.
- Prepare/submit licensing amendment.
" Prepare procedures specifically for loading, sealing and handling load transfer casks.
- Review/approve fabricator's fabrication QA plan.
John White' -'dry cask project plan rev 1 (3).doc dy cak prjectplanrev JohnWhit (3)docPage Pa.ge 01o }1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan 3/29/06 Page 10 of 19
- Arrange for fab shop QA inspection support.
" Fabricate load transfer casks; provide fab shop QA inspection oversight.
" Receive and inspect transfer cask.
Task IV - Design and Fabricationof Lift Yoke andAssociated Slings/Hardware
" Design lift yoke for handling load transfer cask. Prepare design drawings including necessary slings/hardware. Specify requirements for load test of lift yoke.
" Prepare/approve plan for periodic inspection and testing of lift yoke.
- Review/approve fabricator's fabrication QA plan.
" Arrange for fab shop QA inspection support.
" Fabricate lift yoke; provide fab shop QA inspection oversight.
" Perform/witness load test at fab shop or at site, as required.
" Receive and inspect lift yoke.
" Transfer lift yoke to Unit 1 fuel handling area Task V - Design, Fabricationand Placement of Empty Long-Term Storage Containers(e.g., Hi-Storm)
" Design long-term storage containers (this will be extension of existing efforts for Units 2 and 3, for which fabrication of long-stem storage containers are already planned).
" Prepare procedures specifically for loading, sealing and handling long-term storage containers.
- Review/approve fabricator's fabrication QA plan.
" Fabricate long-term storage containers on site; provide on-site QA inspection oversight.
" Transfer empty long-term storage containers to Unit 2 FSB.
Task V1 - Develop License Amendment Request (LAR) o Prepare LAR for shortened Hi-Trac 100 system.
4.6 Fuel Loading and Dry Cask Operations -- PS&O Dept Responsibility These efforts include transfer of spent fuel to DFCs/MPC, placement of the MPC and load transfer cask into the Unit 1 Cask Loading Pool, lifting the load transfer casks from the Unit 1 Cask Load Pool up to the Unit 1 fuel handling area deck (70' elev), transporting the load transfer cask to the Unit 2 FSB, performing an inter-cask transfer (stack-up) of the MPC from the load transfer cask (Hi-Trac) to the long-term storage cask and transporting the long-term storage cask to the IPEC ISFSI.
Task I - ProcedureDevelopment and Training
" Develop procedures for dry cask handling.
" Review/approve dry cask-handling procedures.
" Develop training program for sequence and handling including dry cask handling.
- Review/approve training program.
- Perform classroom training.
" Implement job performance measures (JPMs) and perform practical training.
Task II - Dry Runs
- Develop dry run plan.
" Review/approve dry run plan.
" Perform initial dry runs.
" Perform NRC dry runs.
" Raise SFP level in preparation for dry run.
Task Ill - FinalPreparationsand Readiness Checks
" Perform readiness checks.
" Establish Infrequently Performed Tests and Evolutions (IPTE) requirements
John *Wýe-dycask project plan revl(3).doc ,- Page 1_1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 11 of 19
- Establish management oversight.
Perform Task IVa or lVb depending on results of 4.5 Task I feasibility study above.
Task IVa - PartialTransferof Damaged Spent Fuel to DFCs/MPC
" Ensure proper training and qualification of personnel prior to any fuel movement; this should include activities associated with transfer and placement of fuel elements into DFCs/M PC.
" Move damaged fuel elements to the Cask Load Pool for transfer to DFCs/MPC.
" Transfer remaining fuel elements to the Cask Load Pool for transfer to DFCs/MPC.
Task IVb - Full Transferof Spent Fuel to DFCs/MPC 0 Ensure proper training and qualification of personnel prior to any fuel movement; this should include activities associated with transfer and placement of fuel elements into DFCs/MPC.
. Transfer all fuel elements to Cask Load Pool. Load all fuel elements into DFCs/MPC.
Task V - Placement of MPC and Load TransferCask into the Cask Load Pool
" Prepare/review/approve fuel load plan that includes loading sequence.
" Using the overhead crane, place one MPC into a load transfer cask and then into the Cask Load Pool.
" Place empty DFCs (as appropriate) into MPC.
" Transfer damaged and undamaged fuel elements from the Disassembly Pool and place into the MPC/Ioad transfer cask within the Cask Load Pool in accordance with the fuel load plan.
- After MPC/load transfer cask is full, install MPC lid.
- Lift the full MPC/load transfer cask onto the deck at 70' elevation in the Unit 1 fuel handling area and drain, dry and decontaminate the MPC in accordance with applicable procedures.
Weld the MPC cover and fill MPC with inert gas in accordance with applicable procedures.
Task VI - Perform Transportfrom U1 Cask Load Pool to IPEC ISFSI
- Lift load transfer cask from IP1 cask load pool onto deck at 70' elev and place on LPT.
- Move load transfer cask from Unit 1 fuel handling area using LPT.
" Transfer load transfer cask from LPT to transport crawler; move crawler to U2 FSB on existing roadways.
" Perform intercask transfer of MPC from load transfer cask to long-term storage container, using new U2 FSB gantry crane.
" Load long-term storage container onto transport crawler.
" Move loaded crawler to ISFSI on existing roadways and off-load long-term storage container onto concrete pad of ISFSI.
" Implement all activities described above in the order given in the attached schedule to place the loaded long-term storage containers at the IPEC ISFSI.
4.7 Miscellaneous Activities -- Unit 1 Proiect Team Responsibility Task I - Install PortableDemineralizerfor SFP
" Design installation for portable demineralizer for SFP including selection of demineralizer.
" Review/approve demineralizer installation.
- Procure demineralizer and other components needed for installation.
- Receive/inspect demineralizer.
- Prepare mod package for installation of demineralizer.
" Review/approve mod package.
- Prepare work order for installation of demineralizer.
" Review/approve work order.
" Implement work order for installation of demineralizer.
Task II - Install Backup Level IndicatorMonitoring System
John White --drycask project plan rev1(3).doc Page'12r Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 12 of 19
" Design backup monitoring system including equipment selection.
" Review/approve monitoring system design.
" Procure monitoring system components.
" Receive/inspect monitoring system components.
" Prepare mod package for installation of backup monitoring system.
" Review/approve mod package.
" Prepare work order for installation of backup monitoring system.
" Review/approve work order.
" Implement work order for installation of backup monitoring system.
Task Ill - Evaluationand PossibleModification of North Pool Surfaces
" Inspect the walls of the three north pools (Failed Fuel Pool, Disassembly Pool, Cask Load Pool).
" Based on inspection results, identify as needed coatings to eliminate leakage during flood-up of pools prior to spent fuel transfer from SFP.
" Procureiinstall coatings as needed.
Task IV - Floodup and Remove North Gate
- Upon completion of Task Ill actions, flood up the three north pools to required level.
" Remove north gate separating SFP with Disassembly Pool.
5.0 Cost A table of costs is provided in Attachment D.
6.0 Schedule Project schedule is provided in Attachment E.
John VVhite dr y cask project pla n rev 1 (3). d 6-C Page 13 !1 John White- dry cask project plan rev 1 (3).doc Page 13~j Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit I Spent Fuel Pool Project Plan 3/29/06 Page 13 of 19 7.0 References
- 1. "Project Management," Procedure No. ENN-DC-114 Rev. 3, ENN Nuclear Management Manual, Entergy.
- 2. "Engineering Work Management," Procedure No. ENN-DC-183 Rev. 1, ENN Nuclear Management Manual, Entergy.
- 3. "Control of Heavy Loads at Nuclear Power Plants," NUREG-0612, USNRC, 1980.
- 4. "Single-Failure-Proof Cranes for Nuclear Power Plants," NUREG-0554, USNRC, 1979.
- 5. "Changes, Tests and Experiments," Section 50.59 of Part 50 (Domestic Licensing of Production and Utilization Facilities), Title 10 (NRC Regulations) of the Code of Federal Regulations.
- 6. "Conditions of General License Issued Under §72.210," Section 72.212 of Part 72 (Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste), Title 10 (NRC Regulations) of the Code of Federal Regulations.
- 7. "Changes, Tests and Experiments," Section 72.48 of Part 72 (Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater than Class C Waste), Title 10 (NRC Regulations) of the Code of Federal Regulations.
- 8. "Storage and Transport of Damaged Spent Nuclear Fuel," ANSI N14.33-2005.
- 9. "Damaged Fuel," ISG-1, Rev. 1, Spent Fuel Project Office, Interim Staff Guidance, NRC.
- 10. Project Plan, IPEC Spent Fuel Dry Cask Storage, Project #5C0044 (Unit 2 FSB mods and site ISFSI pad) and Project #6C0294 (Unit 3 FSB mods).
- 11. "Cladding Considerations for the Transportation and Storage of Spent Fuel," ISG-1 1, Rev. 3, Spent Fuel Project Office, Interim Staff Guidance, NRC.
John W hite -'dr-yca--s'k-- p-roje-c-t plan -re-v-_l-(3).doc-1 Page-1411 John White-dry cask project plan revi (3).doc Page 141f Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT A 3/29/06 Page 14 of 19 Project Organization Chart 4
t
John White - dry cask project plan rev 1 (3).doc page 15 Joh Wh te - dry cask project plan rev 1 (3).....d.............. .... . i i.. .... . .... .. j l5 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT B 3/29/06 Page 15 of 19 Move transfer casks to U2; Eventual transfer of fuel transfer MPCs from transfer casks to IPEC ISFSI (using to long-term storage containers I MPCs, transfer casks, long-term storage containers) Move long-term storage containers to IPEC ISFSI
John White -dry cask project plan rev 1 (3).doc w_:-
Page 16r1 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT C 3/29/06 Page 16 of 19 U2 FSB Major activities along transfer path:
U2 fuel 1. Transfer fuel element from SFP to pool DFC/MPO/transfer cask in cask load pool using 75-ton overhead crane.
- 2. Drain, dry and seal weld transfer cask. Move transfer cask to LPT using 75-ton overhead crane.
- 3. Move transfer cask to transport crawler using LPT.
- 4. Move transfer cask to U2 FSB using transport crawler.
SiigntyI] 5. Transfer MPC from transfer cask to long-term 75-ton brdge crane c storage container using U2 gantry crane for intercask transfer (stack-up).
II6. Move loaded long-term storage container to ISFSI failed fuel pool using transport crawler.
Ul SFP I /crawler with 7 Off-load long-term storage container onto concrete disassembly long-term storageco 1 -1; ~nntIninr pad.
Page 17 II I
ýJohn White-dry
ýoh n ýýý cask project plan 4ýy -ýý rey 1 (3).doc plan rev _.,.page 17 11 Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT D 3/29/06 Page 17 of 19 COST ESTIMATES
- 1*
Category
- 1) DFC's - design, license, fabricate
+ 4-2} Hi-Trac/HDWE- design, license, procedure
- fabrication 4- +
- 3) MPC-32 Canisters (5) 1- 1-
- 4) Hi-Storm Overpacks (5) 4- 4-
- 5) Facility Evaluations/Mods - design, license
- implementation 4- 4-
- 6) LPT System - designrfabrication/installation I-1
- 7) Consequence analysis program
- 8) Pool cleanout
- 9) Mockup simulator
- 10) Training and procedures
- 11) Fuel loading/handling (40K wk x 4 wks/cask x 5 casks)
- 12) Install new monitoring wells Total
John White - rv cask DrojeCt Dian rev 1 (3) oc Pagle 18 !1 John White dry cask oroiect olan rev 1 (3~.doc Paae lad Entergy Nuclear Northeast Removal, Relocation and Storage of Spent Fuel from the IPEC Unit 1 Spent Fuel Pool Project Plan ATTACHMENT E 3/29/06 Page 18 of 19 SCHEDULE (effective 3/29106)
SJoh oWbie--dry cask project plan revl -(3).doc-i Page 19!
R los. .nd Storag. of SpentFuel R.Iooj, Ironýthe IPECUnit I SpentFool Pool Prol.d Pt."
ATTACHMENT E P=9.106 page I"o 19
SJoh White --UnitlDry Cask Storage Level Il.doc Page 1 Ii Unit 1 Dry Cask Storage & Pool Drain Down Level II Schedule
- John White- Unit 1 Dry Cask Siorage Lev-el i.doc Page 21 iD ID__ 0 Task Name Name Durationi Start
[ Finsh
_ Ctr3TOtr4 2006 1trl 2007 C1r2 Otr3 Ctr441rl tr2 1Otr31r4 2008 1ir1 14 Hollech Licensing Anmendment (Peloquin) 387 days Tue 11/22/05 ! Wed 5/16/07 20 Design & Fabrication 434 days Tue 111/1iS/i Fri 7W13/01 21 DFC & Fabrication (Peloquin) 412 days Tue 11115/05i Wed 6/1307 28 WC, HITrac &ancill Eq. Fab (Peloquin) 429 days Tue 11/22J05i Frl 7113/01 44 Hi Storm fabrication (Peloquln) 225 days Won6/5/06 Fri 4/13/010 48 Overhead Crane Refu rbishment &Llcense anmendment (Hi 459 days Tue 11/2210S1 Fri 8/24/01 93 Consequence Pialysis (Peloquln) 384 days Tue 11/22/0I M Fri 5111/01 104 i HAJL Pl EV..UAnIONS (Henries) i172 days Fril 127/0(. Won9/2S/06 9
137 West Pool Gate Modifications (Henries) 181 days Fri 1/27/0(, Fri 10/6/0i 162 'CONCRETE FLOOR EL 70-6 CA.CULAION (Henries) i135 days otn 2/20M06 Fri &25/0(
169 i Environmental &Rad evaluation (English) 120 days Fri 9/8/0f. Thu 2/22/07 I 172__ LPT Syslem Design, Fabrication &Mod (Henries) 339 days Lon 2/20/06j Thu 6/710?
216 72.212 Evaluation Report (Stewart) m 351 days Thu 3/16/061 Thu 7M19/07 226 Cask Load Pool deanout, evd &Mod(Hernries) 291days Thu 1M5S j Thu 2J15/07 j236 i North Pool Eval &Coating (Donegan) 210days MOn6/15/06 Fri 4ro/07 247 jNorth Pool Clean out (Donegan) 165 days Lon 3/27/06 Fri 1110/08 "
255 E-PlanImpactevduatlon (Engilsh) i 170days Won 6/19/061 Fri 2/01i 260 'Fire Prolection Plan Impact evatuation (English) 170 days Won 6/19/06 Fri 2/9/07 265 Security Plan Iact evaluation (English) 170 days Won 6/9/061 Fri 2&/01 270 QAplan Impact evaluation (McCann) 140 days Won /19/06i Fri 12/29010 274 Sequence mad Handling Plan (Miter) 80 days Won 3WD/06 Fri 6/23/0(
279 Training & Procedures (PS&O) 320 days Won 6/26/06 1 Fri 9/14/01 -
288 Dryf8uns(PS&0) S0days Won 6/25/071 Fri 10/12101 -
293 Final Preps and Readiness Checks (Peloquin) 20 days Thu W20/07i Wed 10/17/07 -
297 Load, Process and Transfer Fuel to ISFSI (PS80) 50 days Thu 10f18/O7i Wed 12t2607 -
303 Contaninallon Control (Donegan) iISdays Won 1115/071 Fri 6/22/01 312 Restore SF bulldlng Operating loor(Donegan) 287days Won6/26/06i Tue 7/31/07 320 'Receipt & Fit-up (Peloquln) 154 days Tue 1/2/071 Fri 8/3/01 i 325 PoolDrainDown 120days Thu"12f27/071 Wed6/lV08 I I