ML060050026: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(StriderTol Bot change)
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
| issue date = 01/03/2006
| issue date = 01/03/2006
| title = Technical Specification Pages Reactor Coolant System Pressure and Temperature Limits
| title = Technical Specification Pages Reactor Coolant System Pressure and Temperature Limits
| author name = Monarque S R
| author name = Monarque S
| author affiliation = NRC/NRR/ADRO/DORL/LPLC
| author affiliation = NRC/NRR/ADRO/DORL/LPLC
| addressee name =  
| addressee name =  
Line 19: Line 19:


=Text=
=Text=
{{#Wiki_filter:TS 3.1-9 Heatup and cooldown limit curves are calculated using the most limiting value of the nil-ductility reference temperature, RTNDT, at the end of 47.6 Effective Full Power Years (EFPY) and 48.1 EFPY for Units 1 and 2, respectively.
{{#Wiki_filter:TS 3.1-9 Heatup and cooldown limit curves are calculated using the most limiting value of the nil-ductility reference temperature, RTNDT, at the end of 47.6 Effective Full Power Years (EFPY) and 48.1 EFPY for Units 1 and 2, respectively. The most limiting value of RTNDT (238.20 F) occurs at the 1/4-T, 0° azimuthal location in the Unit 1 intermediate-to-lower shell circumferential weld. The limiting RTNDT at the 1/4-T location in the core region is greater than the RTNDT of-the limiting unirradiated material. This ensures that all components in the Reactor Coolant System .will be operated conservatively in accordance with applicable Code requirements.
The most limiting value of RTNDT (238.2 0 F) occurs at the 1/4-T, 0° azimuthal location in the Unit 1 intermediate-to-lower shell circumferential weld. The limiting RTNDT at the 1/4-T location in the core region is greater than the RTNDT of-the limiting unirradiated material.
This ensures that all components in the Reactor Coolant System .will be operated conservatively in accordance with applicable Code requirements.
The reactor vessel materials have been tested to determine their initial RTND'T; the results are presented in UFSAR Section 4.1. Reactor operation and resultant fast neutron (E greater than 1 MEV) irradiation can cause an increase in the RTNTDT. Therefore, an adjusted reference temperature, based upon the copper and nickel content of the material and the fluence was calculated in accordance with the recommendations of Regulatory Guide 1.99, Revision 2 "Effects of Residual Elements on Predicted Radiation Damage to Reactor Vessel Materials." The heatup and cooldown limit curves of Figures 3.1-1 and 3.1-2 include predicted adjustments for this shift in RTNDT at the end of 47.6 EFPY and 48.1 EPPY for Units 1 and 2, respectively (as well as adjustments for location of the pressure sensing instrument).
The reactor vessel materials have been tested to determine their initial RTND'T; the results are presented in UFSAR Section 4.1. Reactor operation and resultant fast neutron (E greater than 1 MEV) irradiation can cause an increase in the RTNTDT. Therefore, an adjusted reference temperature, based upon the copper and nickel content of the material and the fluence was calculated in accordance with the recommendations of Regulatory Guide 1.99, Revision 2 "Effects of Residual Elements on Predicted Radiation Damage to Reactor Vessel Materials." The heatup and cooldown limit curves of Figures 3.1-1 and 3.1-2 include predicted adjustments for this shift in RTNDT at the end of 47.6 EFPY and 48.1 EPPY for Units 1 and 2, respectively (as well as adjustments for location of the pressure sensing instrument).
Surveillance capsules will be removed in accordance with the requirements of ASTM E185-82 and 10 CFR 50, Appendix H. The surveillance specimen withdrawal schedule is shown in the UFSAR. The heatup and cooldown curves must be recalculated when the ARTNDT determined from the surveillance capsule exceeds the calculated ARTNDT for the equivalent capsule radiation exposure, or when the service period exceeds 47.6 EFPY or 48.1 EFPY for Units 1 and 2, respectively, prior to a scheduled refueling outage.Amendment Nos. 24 5 / 244 TS 3.1-10 Allowable pressure-temperature relationships for various heatup and cooldown rates are calculated using methods derived from Appendix G in Section III of the ASME Boiler and Pressure Vessel Code as required by Appendix G to 10 CFR Part 50.The general method for calculating heatup and cooldown limit curves is based upon the principles of the linear elastic fracture mechanics (LEFM) technology.
Surveillance capsules will be removed in accordance with the requirements of ASTM E185-82 and 10 CFR 50, Appendix H. The surveillance specimen withdrawal schedule is shown in the UFSAR. The heatup and cooldown curves must be recalculated when the ARTNDT determined from the surveillance capsule exceeds the calculated ARTNDT for the equivalent capsule radiation exposure, or when the service period exceeds 47.6 EFPY or 48.1 EFPY for Units 1 and 2, respectively, prior to a scheduled refueling outage.
In the calculation procedures a semi-elliptical surface defect with a depth of one-quarter of the wall thickness, T, and a length of one and one half T is assumed to exist at the inside of the vessel wall as. well as at the outside of the vessel wall. The dimensions of this postulated crack, referred to in Appendix G of ASME Section HI as the reference flaw, amply exceed the current capabilities of inservice inspection techniques.
Amendment Nos. 24 5 / 244
Therefore, the reactor operation limit curves developed for this reference crack are conservative and provide sufficient safety margins for protection against non-ductile failure. To assure that the radiation embrittlement effects are accounted for in the calculation of the limit curves, the most limiting value of the nil ductility reference temperature, RTNDT, is used and this includes the radiation-induced shift, ARTNDT, corresponding to the end of the period for which heatup and cooldown curves are generated.
 
The ASME approach for calculating the allowable limit curves for various heatup and cooldown rates specifies that the total stress intensity factor, KI, for the combined thermal and pressure stresses at any time during heatup or cooldown cannot be greater than the reference stress intensity factor, KIC, for the metal temperature at that time. KIC is obtained from the reference fracture toughness curve, defined in Section XI to the ASME Code. The KIC curve is given by the equation: KIC = 33.2 + 20.734 exp [0.02(T -RTNDT)J (1)where KIC is the reference stress intensity factor as a function of the metal temperature T and the metal nil ductility reference temperature RTNDT. Thus, the governing equation for the heatup-cooldown analysis is deffied in Appendix G of the ASME Code as follows: C KIM + KtIt KIC -. (2)where, KI is the stress intensityfactor caused by membrance (pressure) stress.Amendment Nos. 24 5 / 244 TS 3.1-11 KIt is the stress intensity factor caused by the thermal gradients KIC is provided by the code as a function of temperature relative to the RTNDT of the material.C = 2.0 for level A and B service limits, and C = 1.5 for inservice hydrostatic and leak test operations.
TS 3.1-10 Allowable pressure-temperature relationships for various heatup and cooldown rates are calculated using methods derived from Appendix G in Section III of the ASME Boiler and Pressure Vessel Code as required by Appendix G to 10 CFR Part 50.
At any time during the heatup or cooldown transient, KIC is determined by the metal temperature at the tip of the postulated flaw, the appropriate value for RTNDT, and the reference fracture toughness curve. The thermal stresses resulting from temperature gradients through the vessel wall are calculated and then the corresponding thermal stress intensity factor, KIt, for the reference flaw is computed.
The general method for calculating heatup and cooldown limit curves is based upon the principles of the linear elastic fracture mechanics (LEFM) technology. In the calculation procedures a semi-elliptical surface defect with a depth of one-quarter of the wall thickness, T, and a length of one and one half T is assumed to exist at the inside of the vessel wall as. well as at the outside of the vessel wall. The dimensions of this postulated crack, referred to in Appendix G of ASME Section HI as the reference flaw, amply exceed the current capabilities of inservice inspection techniques. Therefore, the reactor operation limit curves developed for this reference crack are conservative and provide sufficient safety margins for protection against non-ductile failure. To assure that the radiation embrittlement effects are accounted for in the calculation of the limit curves, the most limiting value of the nil ductility reference temperature, RTNDT, is used and this includes the radiation-induced shift, ARTNDT, corresponding to the end of the period for which heatup and cooldown curves are generated.
From Equation (2) the pressure stress intensity factors are obtained and, from these, the allowable pressures are calculated.
The ASME approach for calculating the allowable limit curves for various heatup and cooldown rates specifies that the total stress intensity factor, KI, for the combined thermal and pressure stresses at any time during heatup or cooldown cannot be greater than the reference stress intensity factor, KIC, for the metal temperature at that time. KIC is obtained from the reference fracture toughness curve, defined in Section XI to the ASME Code. The KIC curve is given by the equation:
I The heatup limit curve, Figure 3.1-1, is a composite curve which was prepared by determining the most conservative case, with either the inside or outside wall controlling, for any heatup rate up to 60 0 F per hour. The cooldown limit curves of Figure 3.1-2 are composite curves which were prepared based upon the same type analysis with, the exception that the controlling location is always the inside wall where the cooldown thermal gradients tend to produce tensile stresses while producing compressive stresses at the outside wall. The cooldown limit curves are valid for cooldown rates up to 100F/hr.The heatup and cooldown curves were prepared based upon the most limiting value of the predicted adjusted reference temperature at the end of 47.6 EFPY and 48.1 EFPY for Units 1 and 2, respectively.
KIC = 33.2 + 20.734 exp [0.02(T - RTNDT)J                                         (1) where KIC is the reference stress intensity factor as a function of the metal temperature T and the metal nil ductility reference temperature RTNDT. Thus, the governing equation for the heatup-cooldown analysis is deffied in Appendix G of the ASME Code as follows:
The adjusted reference temperature was calculated using materials properties data from the B&W Owners Group Master Integrated Reactor Vessel Surveillance Program (MIRVSP) documented in the most recent revision to BAW-1543 and reactor vessel neutron fluence data obtained from plant-specific analyses.I -7.I ...----, z-AmendmentNos.
C KIM + KtIt     KIC                                                             -.(2) where, KI     is the stress intensityfactor caused by membrance (pressure) stress.
245/244 TS 3.1-23a (3) During the initial 72 hours, maintain a bubble in the pressurizer with a maximum narrow range level of 33%, or (4) Maintain two Power Operated Relief Valves (PORV) OPERABLE with a lift setting of < 395 psig and verify each PORV block valve is open at least once per 72 hours, or (5) The RCS shall be vented through one open PORV or an equivalent size opening as specified below: (a) with the RCS vented through an unlocked open vent path, verify the path is open at least once per 12 hours, or (b) with the RCS vented through a locked open vent path verify the path is open at least once per 31 days.2. The requirements of Specification 3.1.G.1.c.(4) may be modified as follows: a One PORV may be inoperable in INTERMEDIATE SHUTDOWN with the RCS average temperature  
Amendment Nos. 24 5 / 244
> 200 0 F but < 350'F for a period not to exceed 7 days. If the inoperable PORV is not restored to OPERABLE status within 7 days, then completely depressurize the RCS and vent through one open PORV or an equivalent size opening within the next 8 hours.b One PORV may be inoperable in COLD SHUTDOWN or REFUELING SHUTDOWN with the reactor vessel head bolted for a period not to exceed 24 hours. If the inoperable PORV is not restored to OPERABLE status within 24 hours then completely depressurize the RCS and vent through one open PORV or an equivalent size opening within 8 hours.Amendment Nos. 24 5/244 Figure 3.1-1 Surry Units I and 2 Reactor Coolant System Heatup Limitations Material Property Basis Limiting ART: 1/4-T, 238.2 deg. F 3/4-T, 183.9 deg. F 250C-C 2000 0.2 0-a-2-0I 1500 I ox cm Cw 1000 1J 0.10 z la S si C.E 1000 88 ei i 8 8 8 Ia aa *ii 8 iii 20(Fb) 8.,, ., .., , , , , ..........
 
... .0Fh&#xa2;_ n 5 __ Z -_ _ ~ r, -r -r' n- -w -' -r -r --4 r -r-m --'-r -mf -r n -T h _r-a--- -r-r- rr--- -ra-r r 7r-r- -8 n -Jr -,I--&#xa2;n-n-T---rn-a- -r r -I- -TI-r-r ,--r-r -a --a&sect;_ i ------- --r- r-rL , L --A- 444-r LulrrL *- r--_ -r-r -88 88 8 8 8 8 88 I8 88 8.1 , , , I I 8888. ,_'_-n-as-,- -r-rn-- a- -rr-r-ra- ,T-~' ~ ~T-r-r- Umi-tr a--a- T u-r rna,~r~8T --n---rr-n --r- rn~-ru- a----- 'qs--nn-A-L- -I ._-'--'---.-L -LL__---J
TS 3.1-11 KIt is the stress intensity factor caused by the thermal gradients KIC is provided by the code as a function of temperature relative to the RTNDT of the material.
-.J-F , -4 t-'-t-t A--J -L.-tJ-A-4
C = 2.0 for level A and B service limits, and C = 1.5 for inservice hydrostatic and leak test operations.
---------- -I..-i-- --88wJ 8_J -L8 i- _LL8_ Opraio
At any time during the heatup or cooldown transient, KIC is determined by the metal             I temperature at the tip of the postulated flaw, the appropriate value for RTNDT, and the reference fracture toughness curve. The thermal stresses resulting from temperature gradients through the vessel wall are calculated and then the corresponding thermal stress intensity factor, KIt, for the reference flaw is computed. From Equation (2) the pressure stress intensity factors are obtained and, from these, the allowable pressures are calculated.
* i-8 8L 88-> 888 8J j_88 888 88 88. 88 888 8. ,,, .L. ... , -:--&, ...., 8 88 88 8 8 8 8 8 8 8 8 81 8{l + I+ + 1 l l l l_u n .l. t_ ._ _t_ _.,a --.__. _._,, .. ,., .... , ,L...L &#xa3; I.... ,.J..J. ..L.J.... L...L.. .1..L.. JL...L.. .8.L.... ..1.L. ....88 88 8- I 8 ,Hatipll Hatup 88b 8 l ~ ~ 8 .88 8 ...888_4 8L_ 888 8888 8z _ 88 8888L;4-zz
The heatup limit curve, Figure 3.1-1, is a composite curve which was prepared by determining the most conservative case, with either the inside or outside wall controlling, for any heatup rate up to 60 0 F per hour. The cooldown limit curves of Figure 3.1-2 are composite curves which were prepared based upon the same type analysis with, the exception that the controlling location is always the inside wall where the cooldown thermal gradients tend to produce tensile stresses while producing compressive stresses at the outside wall. The cooldown limit curves are valid for cooldown rates up to 100F/hr.
-... _ ..___" 8888 8888l8888~ g 888 888 8888 8888. _,_, 888 8_ s.;-_ .88 888 88...__ .88_, 8888_. 8888 A A 4_- A-._.4_ hv1__4 -4____b 4 4 v 1 .4_ _ _ _ _ d .4__ -1_.0 0 50 100 150 200 250 300 350 400 Indicated Wide Range Cold Leg Temperature (Deg. F)Figure 31-1: SunTy Units 1 and 2 Reactor Coolant System Hleatup Limitations(Ieatp Rates up to 6 0&deg;FAhr) Applicable for the first 47.6 EFPY for Unit 1 and 48.1 EFPY for Unit 2 (Including-Margins-for Instrumentation Errors)AmendmentNos-245/244 Figure 3.1-2 Surry Units 1 and 2 Reactor Coolant System Cooldown Limitations Material Property Basis Limiting ART: 1/4-T, 238.2 deg. F 3/4-T, 183.9 deg. F 250C-aj- 2000 la._U)C4 1500 Is a.S 0)C 1000 S o 10 U la.5 5=5 500-- ------ ---- -.-r r -T-.1 ---r -r- r-rr--- _nnn-~---- -y_~-1-yT- -rr-r-T 1- 4 ~- -n- -r -r r-r--- _---r ----T n --r rrr-T--r~~~~~r~~~~T~~~U~~j -nnn~~~----_~--r rrrT nnn__ r-rr-r-r T +-I -44 4 T -- I 1-7II I.- , , , , , *-a a a a a a a a a a a a a a a a a a a a a a a a^ a a--a-5-5-l~~~~ ~ ~ j .1 -I " .s I I II I' 1 1 1 1 1-.-a ~ r1_,L.$L1__
The heatup and cooldown curves were prepared based upon the most limiting value of the predicted adjusted reference temperature at the end of 47.6 EFPY and 48.1 EFPY for               I-Units 1 and 2, respectively. The adjusted reference temperature was calculated using materials properties data from the B&W Owners Group Master Integrated Reactor Vessel Surveillance Program (MIRVSP) documented in the most recent revision to BAW-1543 and reactor vessel neutron fluence data obtained from plant-specific analyses.
_l___l __-,-t---
I7. V
Uncc taleAt ceJJ ptab -leLt a a a a a a,, apaearaa a a a a e I a a a a a a a a-a a a a a as a a a a; a a a a a a a a a a I i -a a a a a a a a a a a a a a a a a. a a a a-20 aL a_-a a JJt_ aL~tX__ aJ e aLLll aJ _ as a a a a, a_ ,, a, , a a a a a a a a a a a a a a a a a a aI a a s a a a a a a a a al a a a a a F a a a a a a a a a_~ll a JJ___ aLL1_ _JJJ1 aLL1X a a a as as as a a _1_ aaa a.i a, aO as a a a a- a a a a A cpa bl a i as a a a a 2 0 a a -as as a_ 5 a a a a a a a .a a a a a a a a a
  --   - -,z-AmendmentNos. 245/244
* a~ a a a a a a a a a a -a.~~~~~ a a CO. .__,. .....sass-s ass ia sassJL assLa sas aJ asJL _La_ass as as a a .a a as, .l. ....i-f-- ' 5$ &sect; .ll.- .t .JJ. ...L.. ~L ..L.L.. ... ...J ..0 0 50 100 150 200 250 300 350 Indicated Wide Range Cold Leg Temperature (Deg. F)Figure 3.1-2: SWTY Units 1 and 2 Reactor Coolant-System Cooldown Limitations
 
(--odown Rates upjto I 0 F- F.>) Applicable-for-the first 47.6 EFPY for Unit 1 and 48.VEFPY for Unit 2 (Including Margins for Instrumentation Ems)Amendment Nos. 24 5 244}}
TS 3.1-23a (3)   During the initial 72 hours, maintain a bubble in the pressurizer with a maximum narrow range level of 33%,
or (4) Maintain two Power Operated Relief Valves (PORV) OPERABLE with a lift setting of < 395 psig and verify each PORV block valve is open at least once per 72 hours, or (5) The RCS shall be vented through one open PORV or an equivalent size opening as specified below:
(a) with the RCS vented through an unlocked open vent path, verify the path is open at least once per 12 hours, or (b) with the RCS vented through a locked open vent path verify the path is open at least once per 31 days.
: 2. The requirements of Specification 3.1.G.1.c.(4) may be modified as follows:
a   One PORV may be inoperable in INTERMEDIATE SHUTDOWN with the RCS average temperature > 2000 F but < 350'F for a period not to exceed 7 days. If the inoperable PORV is not restored to OPERABLE status within 7 days, then completely depressurize the RCS and vent through one open PORV or an equivalent size opening within the next 8 hours.
b   One PORV may be inoperable in COLD SHUTDOWN or REFUELING SHUTDOWN with the reactor vessel head bolted for a period not to exceed 24 hours. If the inoperable PORV is not restored to OPERABLE status within 24 hours then completely depressurize the RCS and vent through one open PORV or an equivalent size opening within 8 hours.
Amendment Nos. 24 5/244
 
Figure 3.1-1 Surry Units I and 2 Reactor Coolant System Heatup Limitations Material Property Basis Limiting ART:                                                                           1/4-T, 238.2 deg. F 3/4-T, 183.9 deg. F 250C 88        ei8        8 i 8            Ia            aa                    *ii              8      iii                20(Fb)                          8.
                                        ,,.    .    ,.,            ,      ,    ,              ,      .        .........                          ...          .                0Fh r-a---                -r-r-                          rr---                                    -ra-r                      r                      7r-r-        -8 n                -          Jr-,I-
                            &#xa2;_5 __
n        Z - _              _~      r, - r -r' n-         - w - ' - r -r - -                   4 r -r-m '-r -             -         -mf-r n               -T                   h       _
                  -&#xa2;n-n-T---rn-a-                               -r        r -I-           -TI-r-r                          ,--r-r             -a                      -
88 a&sect;_    88            8- i 8      8                8 - 88,
                                                              ------I8            L r-rL---r-A-,      ,      ,88            8.1  444-r                LulrrL        *-       r--_
I    I            -r-r 8888.,      -
  -C 2000    _'_-n-as-,-           -r-rn--                     -rr-r-ra-         a-                             ~ ,T-~'  ~T-r-r-                     Umi-tr                  a--a-          T        u-rrna, 0.2
              ~r~8T                  --          n--rr-n                                --r-                                       rn~-ru- a----                             'qs--nn 0-a-
2-0I 1500 88wJ      8_J        -L8            i-           _LL8_                        Opraio 8L          88->            888
* i-88J                                        888                  j_88 I
ox
                                                                                                            -A-L-
                                                                                                                -I . _
88          88.        -I..-i--
88                        ,,,888                    8.        .L.                ...                    ,                ....    -:--&,                      ,              --
0.
cm 10 1J 8      88                                                      88
_u ._ n_t_8
_.,a.l.
t_
8    8              I+
8    8      8 8        8    81 l    l 8{ll l          + +1 z
Cw 1000 S                                      -'--'---.-L                                                                            ,                 t-'-t-t
                                                                                                                                              -LL__---J
                                                                                                                                                -.J-F      -4                      A--J -L.-tJ-A-4
                    ,, ..                  ,.,                          .            ...            ,                    ,L...L                                                    ,          &#xa3;                      I....
la 1000
.E            .J..J.               .. L.J....                        L...L..                  .1..L..                      JL...L..                   .8.L....               ..       1.L.             ....
C si
                                                                          ,Hatipll          Hatup                                88b              8 88        88 l  ~        8-
                                                  ~I                8 8
888_4
                                                                                .             88 8L_
                                                                                                    .           .       . 8 888                -      ...
8888                  _  8z    88 .. ___"    8888L;4-zz
                                                                                                                                                                                                      -1_.
8888                        8888l 8888~                  g                              888                          888                    8888 8888.                 _,_,                            888 s.;-_                      8_
                                                                                                .88                          888                    88...__
                                                                                                                                                          .88_,                  8888_.                 8888 A                          A          4_- A-._.4_                                                    -4____b hv1__4    _
                                                                                                                                    .4_        _ _ _ 4 4                            d      v. 14__
0 0                    50                        100                      150                          200                      250                      300                        350                    400 Indicated Wide Range Cold Leg Temperature (Deg. F)
Figure 31-1: SunTy Units 1 and 2 Reactor Coolant System Hleatup Limitations(Ieatp Rates up to 60 &deg;FAhr) Applicable for the first 47.6 EFPY for Unit 1 and 48.1 EFPY for Unit 2 (Including-Margins-for Instrumentation Errors)
AmendmentNos- 245/244
 
Figure 3.1-2 Surry Units 1 and 2 Reactor Coolant System Cooldown Limitations Material Property Basis Limiting ART:                                                    1/4-T, 238.2 deg. F 3/4-T, 183.9 deg. F 250C a            a    a a                a a    a a          a  a    a    a          a    a    a a            a    a^ a      a
                    -a    a  a  a        a a
                                        ---           r      -r-      r-rr---        _nnn-~----                                  -y_~-1-yT-                      -rr-r-T-
                  .- r r -T-.1
-      aj-2000 4-        1- 4  ~--n-        -r    -          r      r-r---       _---r                ----            T          n        --      r            rrr-T-la. _
                                                                                                                    ~                                                            r1 U) 1.a
                    --                               -r~~~~~r~~~~T~~~U~~j a-5                                    -nnn~~~----_~--r rrrT                    nnn__                            r-rr-r-r  T +-I                    I                                                I.-     -44 4 T,              --     ,    , , ,
1-7II
* l~~~~  ~        ~                                                                      j      .1         I    -     "    . s C4 1500 Is                                                                                                                                          aaa                  a1          1_1_
a a_~ll I  aLL1_        IaLL1X JJ___    a a            I'a    as          _JJJ1asII    as1          a  a                                                              1 a                                                                      a, aO            as      a a          a  a-       a          a A a acpa                  a bl          i
  .S                  . i 20 0)
C aa a a                a a,,apaearaa                                                  a a_ 5a aa aa                a a a a aa Ie              aa
: a.        a a a a 2          0 a aa a                      as as Uncc taleAt as a a                                                      -                                                       a a a a                    a          a 1000                                                        a                      as a a              a a; a a a      a a            a-a a a a __-,-t---
a _,L.$L1__            a _l___l a a              a a a a              a a a a                  a    a    ceJJ
: a. aptab  -leLt a          a a S                  a a I      i -
aa        aa a a _      a          a a-            a
                                                                                            *a          ea~     a a a aaLaa_-aa aa a, a_  ,, a a,
                            .~~~~~
JJt_    aaJ aaLLll aaL~tX__
a aa, aaCO..__,. ..... a aas aJ                      a a a a             a a a a                   a a a a F asas a a a aI a asJLa a_La_a a a s                assa a a                     a a a ia                      a  a al a sassJL              a  a a a assLa                                              aJ sass-s 10o U                                                              . ass                      as                . as      l. a        .a          a .           .a     as, la
  .5      5
      =5    500                  &sect;                                  i-f--.                ll                                  '          5$
                                                                                .-     .t.JJ.  .  . .L..    ~L      . .L.L..      . ..    ...      J      .  .
0 0                    50                    100                    150                    200                    250                        300                      350 Indicated Wide Range Cold Leg Temperature (Deg. F)
Figure 3.1-2: SWTY Units 1 and 2 Reactor Coolant-System Cooldown Limitations
(--odown Rates upjto I 0F.>)                                 F- Applicable-for-the first 47.6 EFPY for Unit 1 and 48.VEFPY for Unit 2 (Including Margins for Instrumentation Ems)
Amendment Nos. 24 5 244}}

Latest revision as of 10:09, 14 March 2020

Technical Specification Pages Reactor Coolant System Pressure and Temperature Limits
ML060050026
Person / Time
Site: Surry  Dominion icon.png
Issue date: 01/03/2006
From: Stephen Monarque
NRC/NRR/ADRO/DORL/LPLC
To:
Virginia Electric & Power Co (VEPCO)
Monarque, S R, NRR/DLPM, 415-1544
Shared Package
ML060040243 List:
References
TAC MC5509, TAC MC5510
Download: ML060050026 (6)
v • d • e


Text

TS 3.1-9 Heatup and cooldown limit curves are calculated using the most limiting value of the nil-ductility reference temperature, RTNDT, at the end of 47.6 Effective Full Power Years (EFPY) and 48.1 EFPY for Units 1 and 2, respectively. The most limiting value of RTNDT (238.20 F) occurs at the 1/4-T, 0° azimuthal location in the Unit 1 intermediate-to-lower shell circumferential weld. The limiting RTNDT at the 1/4-T location in the core region is greater than the RTNDT of-the limiting unirradiated material. This ensures that all components in the Reactor Coolant System .will be operated conservatively in accordance with applicable Code requirements.

The reactor vessel materials have been tested to determine their initial RTND'T; the results are presented in UFSAR Section 4.1. Reactor operation and resultant fast neutron (E greater than 1 MEV) irradiation can cause an increase in the RTNTDT. Therefore, an adjusted reference temperature, based upon the copper and nickel content of the material and the fluence was calculated in accordance with the recommendations of Regulatory Guide 1.99, Revision 2 "Effects of Residual Elements on Predicted Radiation Damage to Reactor Vessel Materials." The heatup and cooldown limit curves of Figures 3.1-1 and 3.1-2 include predicted adjustments for this shift in RTNDT at the end of 47.6 EFPY and 48.1 EPPY for Units 1 and 2, respectively (as well as adjustments for location of the pressure sensing instrument).

Surveillance capsules will be removed in accordance with the requirements of ASTM E185-82 and 10 CFR 50, Appendix H. The surveillance specimen withdrawal schedule is shown in the UFSAR. The heatup and cooldown curves must be recalculated when the ARTNDT determined from the surveillance capsule exceeds the calculated ARTNDT for the equivalent capsule radiation exposure, or when the service period exceeds 47.6 EFPY or 48.1 EFPY for Units 1 and 2, respectively, prior to a scheduled refueling outage.

Amendment Nos. 24 5 / 244

TS 3.1-10 Allowable pressure-temperature relationships for various heatup and cooldown rates are calculated using methods derived from Appendix G in Section III of the ASME Boiler and Pressure Vessel Code as required by Appendix G to 10 CFR Part 50.

The general method for calculating heatup and cooldown limit curves is based upon the principles of the linear elastic fracture mechanics (LEFM) technology. In the calculation procedures a semi-elliptical surface defect with a depth of one-quarter of the wall thickness, T, and a length of one and one half T is assumed to exist at the inside of the vessel wall as. well as at the outside of the vessel wall. The dimensions of this postulated crack, referred to in Appendix G of ASME Section HI as the reference flaw, amply exceed the current capabilities of inservice inspection techniques. Therefore, the reactor operation limit curves developed for this reference crack are conservative and provide sufficient safety margins for protection against non-ductile failure. To assure that the radiation embrittlement effects are accounted for in the calculation of the limit curves, the most limiting value of the nil ductility reference temperature, RTNDT, is used and this includes the radiation-induced shift, ARTNDT, corresponding to the end of the period for which heatup and cooldown curves are generated.

The ASME approach for calculating the allowable limit curves for various heatup and cooldown rates specifies that the total stress intensity factor, KI, for the combined thermal and pressure stresses at any time during heatup or cooldown cannot be greater than the reference stress intensity factor, KIC, for the metal temperature at that time. KIC is obtained from the reference fracture toughness curve, defined in Section XI to the ASME Code. The KIC curve is given by the equation:

KIC = 33.2 + 20.734 exp [0.02(T - RTNDT)J (1) where KIC is the reference stress intensity factor as a function of the metal temperature T and the metal nil ductility reference temperature RTNDT. Thus, the governing equation for the heatup-cooldown analysis is deffied in Appendix G of the ASME Code as follows:

C KIM + KtIt KIC -.(2) where, KI is the stress intensityfactor caused by membrance (pressure) stress.

Amendment Nos. 24 5 / 244

TS 3.1-11 KIt is the stress intensity factor caused by the thermal gradients KIC is provided by the code as a function of temperature relative to the RTNDT of the material.

C = 2.0 for level A and B service limits, and C = 1.5 for inservice hydrostatic and leak test operations.

At any time during the heatup or cooldown transient, KIC is determined by the metal I temperature at the tip of the postulated flaw, the appropriate value for RTNDT, and the reference fracture toughness curve. The thermal stresses resulting from temperature gradients through the vessel wall are calculated and then the corresponding thermal stress intensity factor, KIt, for the reference flaw is computed. From Equation (2) the pressure stress intensity factors are obtained and, from these, the allowable pressures are calculated.

The heatup limit curve, Figure 3.1-1, is a composite curve which was prepared by determining the most conservative case, with either the inside or outside wall controlling, for any heatup rate up to 60 0 F per hour. The cooldown limit curves of Figure 3.1-2 are composite curves which were prepared based upon the same type analysis with, the exception that the controlling location is always the inside wall where the cooldown thermal gradients tend to produce tensile stresses while producing compressive stresses at the outside wall. The cooldown limit curves are valid for cooldown rates up to 100F/hr.

The heatup and cooldown curves were prepared based upon the most limiting value of the predicted adjusted reference temperature at the end of 47.6 EFPY and 48.1 EFPY for I-Units 1 and 2, respectively. The adjusted reference temperature was calculated using materials properties data from the B&W Owners Group Master Integrated Reactor Vessel Surveillance Program (MIRVSP) documented in the most recent revision to BAW-1543 and reactor vessel neutron fluence data obtained from plant-specific analyses.

I7. V

-- - -,z-AmendmentNos. 245/244

TS 3.1-23a (3) During the initial 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />, maintain a bubble in the pressurizer with a maximum narrow range level of 33%,

or (4) Maintain two Power Operated Relief Valves (PORV) OPERABLE with a lift setting of < 395 psig and verify each PORV block valve is open at least once per 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />, or (5) The RCS shall be vented through one open PORV or an equivalent size opening as specified below:

(a) with the RCS vented through an unlocked open vent path, verify the path is open at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />, or (b) with the RCS vented through a locked open vent path verify the path is open at least once per 31 days.

2. The requirements of Specification 3.1.G.1.c.(4) may be modified as follows:

a One PORV may be inoperable in INTERMEDIATE SHUTDOWN with the RCS average temperature > 2000 F but < 350'F for a period not to exceed 7 days. If the inoperable PORV is not restored to OPERABLE status within 7 days, then completely depressurize the RCS and vent through one open PORV or an equivalent size opening within the next 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br />.

b One PORV may be inoperable in COLD SHUTDOWN or REFUELING SHUTDOWN with the reactor vessel head bolted for a period not to exceed 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. If the inoperable PORV is not restored to OPERABLE status within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> then completely depressurize the RCS and vent through one open PORV or an equivalent size opening within 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br />.

Amendment Nos. 24 5/244

Figure 3.1-1 Surry Units I and 2 Reactor Coolant System Heatup Limitations Material Property Basis Limiting ART: 1/4-T, 238.2 deg. F 3/4-T, 183.9 deg. F 250C 88 ei8 8 i 8 Ia aa *ii 8 iii 20(Fb) 8.

,,. . ,., , , , , . ......... ... . 0Fh r-a--- -r-r- rr--- -ra-r r 7r-r- -8 n - Jr-,I-

¢_5 __

n Z - _ _~ r, - r -r' n- - w - ' - r -r - - 4 r -r-m '-r - - -mf-r n -T h _

-¢n-n-T---rn-a- -r r -I- -TI-r-r ,--r-r -a -

88 a§_ 88 8- i 8 8 8 - 88,

I8 L r-rL---r-A-, , ,88 8.1 444-r LulrrL *- r--_

I I -r-r 8888., -

-C 2000 _'_-n-as-,- -r-rn-- -rr-r-ra- a- ~ ,T-~' ~T-r-r- Umi-tr a--a- T u-rrna, 0.2

~r~8T -- n--rr-n --r- rn~-ru- a---- 'qs--nn 0-a-

2-0I 1500 88wJ 8_J -L8 i- _LL8_ Opraio 8L 88-> 888

  • i-88J 888 j_88 I

ox

-A-L-

-I . _

88 88. -I..-i--

88 ,,,888 8. .L. ... , .... -:--&, , --

0.

cm 10 1J 8 88 88

_u ._ n_t_8

_.,a.l.

t_

8 8 I+

8 8 8 8 8 81 l l 8{ll l + +1 z

Cw 1000 S -'--'---.-L , t-'-t-t

-LL__---J

-.J-F -4 A--J -L.-tJ-A-4

,, .. ,., . ... , ,L...L , £ I....

la 1000

.E .J..J. .. L.J.... L...L.. .1..L.. JL...L.. .8.L.... .. 1.L. ....

C si

,Hatipll Hatup 88b 8 88 88 l ~ 8-

~I 8 8

888_4

. 88 8L_

. . . 8 888 - ...

8888 _ 8z 88 .. ___" 8888L;4-zz

-1_.

8888 8888l 8888~ g 888 888 8888 8888. _,_, 888 s.;-_ 8_

.88 888 88...__

.88_, 8888_. 8888 A A 4_- A-._.4_ -4____b hv1__4 _

.4_ _ _ _ 4 4 d v. 14__

0 0 50 100 150 200 250 300 350 400 Indicated Wide Range Cold Leg Temperature (Deg. F)

Figure 31-1: SunTy Units 1 and 2 Reactor Coolant System Hleatup Limitations(Ieatp Rates up to 60 °FAhr) Applicable for the first 47.6 EFPY for Unit 1 and 48.1 EFPY for Unit 2 (Including-Margins-for Instrumentation Errors)

AmendmentNos- 245/244

Figure 3.1-2 Surry Units 1 and 2 Reactor Coolant System Cooldown Limitations Material Property Basis Limiting ART: 1/4-T, 238.2 deg. F 3/4-T, 183.9 deg. F 250C a a a a a a a a a a a a a a a a a a^ a a

-a a a a a a

--- r -r- r-rr--- _nnn-~---- -y_~-1-yT- -rr-r-T-

.- r r -T-.1

- aj-2000 4- 1- 4 ~--n- -r - r r-r--- _---r ---- T n -- r rrr-T-la. _

~ r1 U) 1.a

-- -r~~~~~r~~~~T~~~U~~j a-5 -nnn~~~----_~--r rrrT nnn__ r-rr-r-r T +-I I I.- -44 4 T, -- , , , ,

1-7II

  • l~~~~ ~ ~ j .1 I - " . s C4 1500 Is aaa a1 1_1_

a a_~ll I aLL1_ IaLL1X JJ___ a a I'a as _JJJ1asII as1 a a 1 a a, aO as a a a a- a a A a acpa a bl i

.S . i 20 0)

C aa a a a a,,apaearaa a a_ 5a aa aa a a a a aa Ie aa

a. a a a a 2 0 a aa a as as Uncc taleAt as a a - a a a a a a 1000 a as a a a a; a a a a a a-a a a a __-,-t---

a _,L.$L1__ a _l___l a a a a a a a a a a a a ceJJ

a. aptab -leLt a a a S a a I i -

aa aa a a _ a a a- a

  • a ea~ a a a aaLaa_-aa aa a, a_ ,, a a,

.~~~~~

JJt_ aaJ aaLLll aaL~tX__

a aa, aaCO..__,. ..... a aas aJ a a a a a a a a a a a a F asas a a a aI a asJLa a_La_a a a s assa a a a a a ia a a al a sassJL a a a a assLa aJ sass-s 10o U . ass as . as l. a .a a . .a as, la

.5 5

=5 500 § i-f--. ll ' 5$

.- .t.JJ. . . .L.. ~L . .L.L.. . .. ... J . .

0 0 50 100 150 200 250 300 350 Indicated Wide Range Cold Leg Temperature (Deg. F)

Figure 3.1-2: SWTY Units 1 and 2 Reactor Coolant-System Cooldown Limitations

(--odown Rates upjto I 0F.>) F- Applicable-for-the first 47.6 EFPY for Unit 1 and 48.VEFPY for Unit 2 (Including Margins for Instrumentation Ems)

Amendment Nos. 24 5 244

Retrieved from "https://kanterella.com/w/index.php?title=ML060050026&oldid=2588008"