Revision as of 17:34, 13 November 2019

Text

R14 Inservice Inspection Summary Report
	ML101820119
Person / Time
Site:	Vogtle
Issue date:	06/30/2010
From:	Ajluni M; Southern Nuclear Operating Co
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	NL-10-1252
	Download: ML101820119 (79)
	v • d • e

{{#Wiki_filter:Southern Nuclear Operating Company, Inc. June 30, 2010 SOUTHERN'\' COMPANY Docket Nos.: 50-425 NL-10-1252 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D. C. 20555-0001 Vogtle Electric Generating Plant - Unit 2 2R14 Inservice Inspection Summary Report Ladies and Gentlemen: Southern Nuclear Operating Company (SNC) submits the Vogtle Electric Generating Plant Unit 2, Interval 3, Period 1, Outage 2 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the spring 2010 maintenance/refueling outage. Paragraph IWA-6240 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, 2001 Edition with addenda through 2003 requires submittal of the enclosed report. The supporting inservice inspection documentation, e.g., examination plans and schedules, examination results and reports, examination methods and procedures, evaluation results, and corrective action and repairs, is available for review upon request at Vogtle Electric Generating Plant. This letter contains no NRC commitments. If you have any questions, please contact Jack Stringfellow at (205)992-7037. Respectfully submitted, M. J. Ajluni Manager - Nuclear Licensing MJAITAHllac

Enclosures:

Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Summary Report Refueling Outage (2R14)

U. S. Nuclear Regulatory Commission Log: NL-10-12S2 Page 2 cc: Southern Nuclear Operating Company Mr. J. T. Gasser, Executive Vice President Mr. T. E. Tynan, Vice President - Vogtle Ms. P. M. Marino, Vice President - Engineering RType: CVC7000 U. S. Nuclear Regulatory Commission Mr. L. A. Reyes, Regional Administrator Mr. R. E. Martin, NRR Project Manager - Vogtle Mr. M. Cain, Senior Resident Inspector - Vogtle Mr. P.G. Boyle, NRR Project Manager

SOUTHERN.\' SOUTHERN . \ . COMPANY COMPANY INSERVICE INSPECTION REPORT REFUELING 14 INTERVAL 3 PERIOD 1 OUTAGE 2 Vogtle Electric Generating Plant Unit 2 (7821 River Road, P. O. Box 1600, Waynesboro, Georgia 30830) Southern Nuclear Operating Company 40 Inverness Parkway Birmingham, Alabama 35242 COMMERCIAL OPERATION DATE: May 20,1989 DOCUMENT COMPLETION DATE: June 2010

VOGTLE ELECTRIC GENERATING (VEGP) PLANT 2R14 FINAL REPORT TABLE OF CONTENTS SECTION VOLUME 1 (OWNER'S REPORT)

INTRODUCTION AND ABBREVIATIONS A
ASME FORM NIS-1 AND ABSTRACT B
INSERVICE INSPECTION (OWNER'S REPORT) EXAMINATION

SUMMARY

CLASS 1 AND 2 WELDS AND SUPPORT EXAMINATIONS C SYSTEM PRESSURE TESTS D REPORTABLE INDICATION

SUMMARY

E

OWNER'S REPORT FOR REPAIRS AND REPLACEMENTS (FORM NIS-2) F VOLUME 2 (151 EXAMINATION DATA)
EXAMINATION PROGRAM PLAN (TOTAL SCOPE

SUMMARY

) G

lSI EXAMINATION DATA H VOLUME 3 (CERTIFICATIONS)
PERSONNEL CERTIFICATIONS I
EXAMINATION PROCEDURES (LISTING) J
EQUIPMENT CERTIFICATIONS & CALIBRATION BLOCKS (LISTING) K VOLUME 4 (FLOW ACCELERATED CORROSION* FAC)
FAC EXAMINATION

SUMMARY

L

FAC EXAMINATION DATA M VOLUME 1 CONTAINS THE INFORMATION TO MEET THE REQUIREMENTS OF ASME CODE 2001 EDITION w 2003 ADDENDA, SECTION XI, SUBSECTION IWA-6240 FOR SUBMITTAL OF A

SUMMARY

REPORT TO THE NRC FOLLOWING EACH REFUELING OUTAGE. VOLUMES 2 AND 3 CONTAIN THE SUPPORTING DOCUMENTATION FOR THE EXAMINATIONS PERFORMED (RETAINED ON SITE BY VEGP) VOLUME 4 CONTAINS DOCUMENTATION OF THE FLOW ACCELERATED CORROSION (FAC) INSPECTIONS PERFORMED (RETAINED ON SITE BY VEGP) 1

SOUTHERN_ SOUTHERN_ COMPANY COMPANY SOUTHERN NUCLEAR OPERATING COMPANY MA TERIALS AND INSPECTION SERVICES INSERVICE INSPECTIONS PLANT VOGTLE UNIT 2 REFUELING OUTAGE 14 SPRING 2010 Volume 1 Owner's Report

TAB A INTRODUCTION & ABBREVIATIONS

INTRODUCTION This report documents the examinations and tests performed at Vogtle Electric Generating Plant, Unit 2 th (VEGP-2) between October 21, 2008 (end of the thirteenth (13 ) maintenance/refueling outage, 2R13) and April 7, 2010 (end of the fourteenth (14th) maintenance/refueling outage, 2R14) to meet the requirements of Article IWA-6000 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, 2001 Edition with 2003 Addenda (Code). This report also addresses Code-applicable repairs and/or replacements, which were documented since the last maintenance/refueling outage at VEGP-2 through the completion of the fourteenth maintenance/refueling outage on April 7, 2010 done per the 2001 Edition with 2003 Addenda. The Owner's Reports for Repairs and Replacements (Form NIS-2) are included herein. This report does not include Steam Generator Tube Inspections which are required per VEGP Technical Specification 5.6.10. This information will be provided in a separate report one hundred eighty (180) days after the initial entry into MODE 4 following completion of an inspection performed in accordance with Technical Specification 5.5.9. The ASME Code requirements were met and the separate report will provide the details for these examinations. 1-1

LIST OF ABBREVIATIONS ACC Acceptable AD AnchorlDarling AFW Auxiliary Feedwater System AI GPC Action Item (followed by unique no. denoting Action Item number) ANI! Authorized Nuclear Inservice Inspector ASME American Society of Mechanical Engineers ASNT American Society for Nondestructive Testing ASTM American Society for Testing and Materials BC Branch Connection CCSS Centrifugally Cast Stainless Steel CCW Component Cooling Water CE Combustion Engineering CH Closure Head CR Condition Report CS Containment Spray CVCS Chemical and Volume Control System OS Downstream ET Eddy Current Examination EVAL Evaluation FAC Flow-Accelerated Corrosion (may also be referred to as "erosion/corrosion") FB Flange Bolting FNF FAC Notification Report FW Feedwater System FSAR VEGP Final Safety Analysis Report (includes updates thereto) GEO Geometric Indications GPC Georgia Power Company HHSI High Head Safety Injection HL Hanger Lug HX Heat Exchanger HYD Hydraulic Snubber lEN NRC Information Notice (may also be shown as "IN" followed by unique no. denoting notice number) IND Indication INF Indication Notification Form lSI Inservice Inspection 1ST Inservice Testing ITS VEGP Improved Technical Specification 10 Inside Diameter IR Inside Radius LB Large Bore LD Longitudinal Seam Weld Extending Downstream LD-I Longitudinal Seam Weld Downstream Inside Radius of Elbow LD-O Longitudinal Seam Weld Downstream Outside Radius of Elbow LMT Lambert, MacGill and Thomas LU Longitudinal Seam Weld Extending Upstream LU-I Longitudinal Seam Weld Upstream Inside Radius of Elbow LU-O Longitudinal Seam Weld Upstream Outside Radius of Elbow MECH Mechanical Snubber MS Main Steam System MT Magnetic Particle Examination NCI Nonconformance Item NDE Nondestructive Examination 1-2

LIST OF ABBREVIATIONS* (continued) NI No Indication NRC United States Nuclear Regulatory Cornmission NRC-B NRC Bulletin (followed by unique no. denoting Bulletin number) NRI No Recordable Indication NSCW Nuclear Service Cooling Water System OR Outside Radius PL Pipe Lug PM Paul-Munroe ENERTECH PR Pipe Restraint PROF Profile PS Pipe Support PSA Pacific Scientific PSI Preservice Inspection PT Liquid Penetrant Examination RCS Reactor Coolant System RCP Reactor Coolant Pump RHR Residual Heat Removal System RI Recordable Indication RLW Refracted Longitudinal Wave RL Restraint Lug RPV Reactor Pressure Vessel RR Relief Request (followed by unique no. denoting relief request number) RWST Refueling Water Storage Tank SAT Satisfactory Examination Results SB Small Bore SCS Southern Company Services SI Safety Injection System SNC Southern Nuclear Operating Company SUP Supplemental Data T&C Thickness and Contour TDAFW Turbine Driven Auxiliary Feedwater (Pump) UNSAT Unsatisfactory Examination Results US Upstream UT Ultrasonic Examination VEGP Vogtle Electric Generating Plant (common unless followed by "-1" or "-2" to designate a specific plant unit) VT Visual Examination W Westinghouse 1-3

TABB ASME FORM NIS-1 AND ABSTRACT

Form NIS-1
Abstract

FORM NIS*1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner: Southern Nuclear Operating Company (as agent for Georgia Power Company), 40 Inverness Center Parkway, Birmingham, AL 35242

2. Plant: Vogtle Electric Generating Plant, 7821 River Road P. O. Box 1600, Waynesboro, Georgia 30830

3. Plant Unit: Two

4. Owner Certification of Authorization: N/A

5. Commercial Service Date: 05/20/89

6. National Board Number for Unit: N/A

7. Components Inspected:

Component or Manufacturer or Manufacturer or Installer State or National Board

Appurtenance Installer and Serial Number Province Number i Address Number Reactor Combustion Eng. 7372 N/A 22004 Pressure Vessel Inc.,

Chattanooga, TN Steam Westinghouse GBGT 1984 (77743), N/A 36, Generators 1 Elec., GBGT 1983 (77745), 35, i thru 4 Pensacola, FL GBGT 1982 (77742), 34, GBGT 1981J77744) 33 I Pressurizer Westinghouse 77749 N/A .24 I Elec., i i Pensacola, FL I Reactor Coolant Westinghouse 8-9744035G01 N/A *40 , Pump #1 Elec., Cheswick, PA Residual Heat Ingersoll-Rand Co., 087730 N/A 512 Removal Pump, Phillipsburg, NJ Train "A" Residual Heat Joseph Oat Corp., 2322-20 N/A 1051

                                                                                                      ,I Removal Heat        Camden, NJ                                                                        i

Exchanger,

Train "B" Centrifugal Pacific Pumps, 52235 NA 412 Charging Pump, Huntington Park, Train "A" CA

Selected Piping, Pullman Power System Numbers 1201, 1204, N/A N/A Components, Products, 1205, 1301 & 1305 and Supports Williamsport, PA 2-1

FORM NIS-1 (Back)

8. Examination Dates: October 21,2008 to April 7, 2010

9. Inspection Period Identification: First Period

10. Inspection Interval Identification: Third Inspection Interval

11. Applicable Edition of Section XI 2001 Addenda 2003

12. Date/Revision of Inspection Plan: June 30.20091 Version 3.0

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. (See Abstract and Examination Summary Listings)

14. Abstract of Results of Examinations and Tests. (See Abstract)

15. Abstract of Corrective Measures. (See Abstract)

We certify that a) the statements made in this report are correct. b) the examinations and tests meet the Inspection Plan as required by the ASME Code. Section XI. and c) corrective measures taken conform to the rules of the ASME Code. Section XI. Certificate of Authorization No. (if applicable) N/A Expiration Date N/A Date: ,/'2. 't 20l!? Signed: Southern Nuclear Operating Company. Inc. for Byo/9sry Georgia Power Company Owner CERTIFICATE OF INSERVICE INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Georgia and employed by The Hartford Steam Boiler Inspection and Insurance Company of Connecticut of Hartford. CT have inspected the components described in this Owner's Report during the period October 21. 2008 to April 7. 2010, and state that to the best of my knowledge and belief. the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required of the ASME Code. Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or im lied. concerning t examinations. tests. and corrective measures described in this Owner's Report. urt rmore. neither he Insp or nor his employer shall be liable in any manner for any personal injury or rope 10 s of n kind arising from or connected with this inspection. Commission: -:---:-::-----'Gft~

                                                                                 . . . . . . .~O~O__ ~-=--:--_

I--:'( Signature National Board, State, Province, and Endorsements Date:._~~Ii:::o'-_-_3_o_ _.....20JJ;) 2-2

ABSTRACT - ASME CLASS 1 AND 2 Introduction/Status The ASME Boiler and Pressure Vessel Code, Section XI, 2001 Edition (Code), with the 2003 Addenda, is the applicable code for conducting inservice inspection activities during the third ten-year inspection interval at VEGP-2. Examinations and tests required by the Code are scheduled in accordance with "Inspection Program B" as defined in Code paragraphs IWB-2412 and IWC-2412. This "Owner's Report for Inservice Inspection" is for those third inspection period examinations and tests which were performed between October 21,2008, (end of 2R13 maintenance/refueling outage) and April 7, 2010 (end of 2R14 maintenance/refueling outage). VEGP has implemented ASME Section XI, Appendix VIII, "Performance Demonstration for Ultrasonic Examination Systems," as required by 10CFR 50.55a, amended by the Federa/ Register Notices 64 FR 51370 dated September 22,1999, as later modified by 69 FR58804, dated October 1, 2004. The initial Rule specified the 1995 Edition with Addenda through 1996 as the applicable edition of ASME Section XI, Appendix VIII. The 2004 Rule incorporated the 2001 Edition with NRC caveats. VEGP has, except where requests for relief, technical altematives or exemptions have been approved, complied with the requirements for expedited implementation of the applicable Appendix VIII supplements using the EPRI Performance Demonstration Initiative (PDI). In addition to the summary of inservice inspection activities, this report addresses Code-applicable repairs and replacements documented at VEGP-2 since 2R13 through the end of 2R14. Class 1 and Class 2 Owner's Reports for Repairs or Replacements (Form NIS-2) are provided herein. It should be noted that Authorized Nuclear Inservice Inspector (ANII) inspection services were provided for those examinations and tests required by the Code. ASME Section XI examinations and tests are itemized in the applicable sections by reference to Examination Category. Examinations which do not meet the Code-required coverage either reference request(s) for relief or indicate that additional relief is required. Class 1 Examinations Selected Class 1 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT), magnetic particle testing (MT), liquid penetrant (PT), and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.

During the scope of VEGP-2 examinations conducted, no Class 1 components was observed to have reportable indications.

Seven (7) Class 1 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. More than ninety percent (90%) of the required volume must be examined as addressed in ASME Section XI Code Case N-460 for adequate ASME Section XI Code-required examination coverage to be attained. As noted herein, the subject code case has been approved by the NRC for use as documented in NRC Regulatory Guide 1.147. It is impractical to achieve the ASME Section XI Code-required coverage due to the geometric configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief request process as allowed by 10 CFR 50.55a. Class 1 Pressure Test Table IWB-2500-1, Examination Category B-P of the 2001 Edition with Addenda through 2003 of ASME Section XI requires the performance of a system leakage test (IWB-5221) each refueling outage. This system leakage test (14910-201) was performed prior to plant startup following the refueling outage. These visual examinations revealed minor leakage and boron residue at mechanical connections. These 2*3

leakage conditions were either corrected or evaluated and determined acceptable for continued system operation. Class 2 Examinations Selected Class 2 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT). magnetic particle testing (MT), liquid penetrant (PT). and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.

During the scope of VEGP-2 examinations conducted. no Class 2 components were observed to have reportable indications.

Three (3) class 2 piping and/or eqUipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. As with the Class 1 examinations. it is impractical to achieve the ASME Section XI Code-required coverage due to the geometric configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief request process as allowed by 10 CFR 50.55a. Class 2 Pressure Tests Table IWC-2500-1. Examination Category C-H of the 2001 Edition with Addenda through 2003 of ASME Section XI requires system leakage tests. The specific system leakage tests performed are itemized in the "System Pressure Tests" portion of this report document. The visual examinations performed during these system leakage tests found only minor leakage or residue at mechanical joints. such as valve stem packing and at flanged connections. These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation. Class 1 and 2 Component Supports Selected Class 1 and 2 component supports were examined by Southern Nuclear Operating Company (SNC) personnel utilizing the visual testing (VT) method. Specific components and examination areas are itemized in the applicable portions of this document.

During the scope ofVEGP-2 examinations conducted. no component supports were observed to have unsatisfactory results.

Class MC Containment Examinations and Tests (lWE) During the VEGP-2 Spring 2010 maintenance/refueling outage. General Visual, VT-3 and VT-1 examinations were performed on Class MC Pressure retaining components with their integral attachments. These examinations were performed in accordance with ASME Section XI. Subsection IWE of the 2001 Edition through the 2003 Addenda and were performed using VEGP procedure 84303-C "Containment Liner General Visual Examination" and NMP-ES-024-204 "Visual Examination (IWE)". Per procedure NMP-ES-024-204. the pressure retaining bolting and the containment pressure boundary was examined for defects that could violate the leak-tight or structural integrity. Personnel performing the examinations were qualified in accordance with VEGP procedure NMP-ES-024 100 "Qualification and Certification of Nondestructive Examination and Testing Personnel". Optical aids such as flashlights. mirrors and binoculars were used when performing the examinations that included both direct and remote visual examination methods. Category E-A, Containment Surfaces A General Inspection of 100% of the interior and exterior accessible surface areas of the containment pressure boundary was performed and documented under Surveillance 84303-201-2091486401. All 2-4

anomalies consisted of surface rust, scratches, discolorations, etc. and were evaluated as not affecting the structural integrity or leak tightness of the containment pressure boundary. To fulfill the requirements of the Vogtle Unit 2 Containment Inspection Plan, the following containment pressure boundary bolted connections were examined during 2R14. VT-1 or VT-3 examinations were performed to fulfill the requirements. No anomalies of the examined components were identified and results are documented under Surveillance 85053-201-2091484001. Personnel Air Lock Emergency Air Cover 22101 R2014 Escape Air Lock Emergency Air Cover 22101R2015 Dedicated Outage Penetrations 5-M & 55-M Electrical Penetrations 21818H3P01 21818H3P19 21818H3P37 21818H3P55 21818H3P02 21818H3P20 21818H3P38 21818H3P56 21818H3P03 21818H3P21 21818H3P39 21818H3P57 21818H3P04 21818H3P22 21818H3P40 21818H3P58 21818H3P05 21818H3P23 21818H3P41 21818H3P59 21818H3P06 21818H3P24 21818H3P42 21818H3P60 21818H3P07 21818H3P25 21818H3P43 21818H3P61 21818H3P08 21818H3P26 21818H3P44 21818H3P62 21818H3P09 21818H3P27 21818H3P45 21818H3P63 21818H3P10 21818H3P28 21818H3P46 21818H3P64 21818H3P11 21818H3P29 21818H3P47 21818H3P65 21818H3P12 21818H3P30 21818H3P48 21818H3P66 21818H3P13 21818H3P31 21818H3P49 21818H3P67 21818H3P14 21818H3P32 21818H3P50 21818H3P68 21818H3P15 21818H3P33 21818H3P51 21818H3P69 21818H3P16 21818H3P34 21818H3P52 21818H3P70 21818H3P17 21818H3P35 21818H3P53 21818H3P71 21818H3P18 21818H3P36 21818H3P54 21818H3P72 Class CC Containment Examinations (lWL) None performed since the last Owner's Report for Inservice Inspection was submitted. Status of Examinations Required for the current Interval This 2R14 Outage was the 2 nd Outage, 1sl period of the 3rd Interval. The results from this outage, combined with the "scheduled" examinations from the previous refueling outage (2R13, Fall 2008) will represent 100% of the total Class 1 and 2 scope for the current period and interval. VEGP Unit 2 is within ASME Code compliance. pending NRC approval of the volumetric and/or surface examination limitations. Requests for relief will be submitted within the required time frame specified by 10 CFR 50.55a. Applicable Code Cases The applicable Code Cases for the 2R 14 Outage are identified in Enclosure 4, Volume 1 of the VEGP Units 1 and 2 Inservice Inspection Plan, Third Inspection Intervals. The Code Cases and limitations of use are derived from Revision 14 and 15 of NRC Regulatory Guide 1.147. 2-5

lABe INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

CLASS 1 AND 2 WELD EXAMINATIONS
CLASS 1 AND 2 SUPPORT EXAMINATIONS

-~~-- Vogtle 2R14 - Examination Summary (Total Piping)

~-~

Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat /Item S09V1 R-A 21201-029-34-RB NMP-ES-024-501 S10V2U043 NRI NA R1.20 4" PIPE TO REDUCER R-A 21201-030-19-RB 50% Code Coverage. Relief Request NMP-ES-024-501 S10V2U042 NRI ~~ R1.20

~-~

4" VALVE TO PIPE required. R-A 21201-030-21-RB NMP-ES-024-501 S10V2U039 NRI NA

--~

R1.20 4" ELBOW TO PIPE R-A 21201-030-22-RB NMP-ES-024-501 S10V2U041 NRI NA -~-~- R1.20 4" PIPE TO ELBOW R-A 21201-030-31-RB NMP-ES-024-50 1 S10V2U040 NRI NA R1.11 6" TEE TO PIPE R-A 21201-030-37-RB NMP-ES-024-501 S10V2U018 NRI NA R1.11 6" PIPE TO ELBOW R-A 21201-030-38-RB NMP-ES-024-501 S10V2U019 NRI 98.3% Code Coverage. R1.11 6" ELBOW TO PIPE R-A 21201-030-39-RB NMP-ES-024-501 S10V2U020 NRI NA R1.11 6" PIPE TO ELBOW ~-~ R-A 21201-030-40-RB NMP-ES-024-501 S10V2U021 NRI NA R1.11 6" ELBOW TO PIPE R-A 21201*030-43-RB NMP-ES-024-501 S10V2U048 NRI NA R1.11 6" PIPE TO REDUCER R-A 21201-030-44-RB NMP-ES-024-501 S10V2U049 NRI NA R1.11 4" REDUCER TO PIPE R-A 21201-030-45-RB NMP-ES-024-501 S10V2U046 NRI NA R1.11 4" PIPE TO ELBOW --~ - R-A 21201-030-46-RB NMP-ES-024-501 S10V2U045 NRI NA R1.11 4" ELBOW TO PIPE WOL 21201-030-WOL-1 NMP-ES-024-509 S10V2U013 NRI NA Q-4300 N-5 PRESSURIZER NOZZLE OVERLAY R-A 21201-031-3-RB 96.6% Code Coverage. Examined per NMP-ES-024-501 S10V2U031 NRI R1.11H 2" ELBOW TO PIPE MRP-146 requirements. R-A 21201-042-3-RB 96.6% Code Coverage. Examined per NMP-ES-024-501 S10V2U012 NRI R1.11H 2" ELBOW TO PIPE MRP-146 requirements. R-A 21201-046-3-RB 96.6% Code Coverage. Examined per NMP-ES-024-501 S10V2U010 NRI ~""---- R1.11H 2" ELBOW TO PIPE MRP-146 r~uirements. 3-1

Vogtle 2R14 - Examination Summary (Total Piping)

                                                                                ~-- ~-~

Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat /Item S09V1 R-A 21201-0S1-3-RB 96.6% Code Coverage. Examined per NMP-ES-024-501 S10V2U032 NRI R1.11H 2" ELBOW TO PIPE ~-~ MRP-146 requirements. R-A 21201-0S3-1-RB NMP-ES-024-501 S10V2U050 NRI NA R1.11 16" BRANCH CONNECTION TO PIPE R-A 21201-OS3-4-RB NMP-ES-024-501 S10V2U051 NRI NA R1.11 16" PIPE TO REDUCER R-A 21201-OS3-S-RB NMP-ES-024-501 S10V2U052 NRI NA R1.11 14" REDUCER TO PIPE WOL 21201-0S3-WOL-1 NMP-ES-024-509 S10V2U024 NRI NA Q-4300 N-6 PRESSURIZER OVERLAY WOL 21201-056-WOL-1 NMP-ES-024-509 S10V2U014 NRI NA L - - Q-4300 N-3 PRESSURIZER NOZZLE OVERLAY WOL 21201-057-WOL-1 NMP-ES-024-509 S10V2U016 NRI 97.45% Code Coverage. Q-4300 N-2 PRESSURIZER NOZZLE OVERLAY WOL 21201-058-WOL-1 NMP-ES-024-509 S10V2U015 NRI NA Q-4300 N-1 PRESSURIZER NOZZLE OVERLAY WOL 21201-OS9-WOL-1 NMP-ES-024-509 S10V2U017 NRI NA Q-4300 N-4 PRESSURIZER NOZZLE OVERLAY R-A 21204-021-24-RB NMP-ES-024-50 1 S10V2U055 NRI NA R1.20 6" PIPE TO ELBOW R-A 21204-021-25-RB NMP-ES-024-50 1 S10V2U056 NRI NA R1.20 6" ELBOW TO PIPE R-A 21204-021-26 A-RB NMP-ES-024-50 1 S10V2U061 NRI NA R1.20 12" REDUCER TO PIPE (AI8?-0131) R-A 21204-021-26-RB ~ 50% Code Coverage. Relief Request NMP-ES-024-50 1 S10V2U067 NRI R1.20 6" PIPE TO REDUCER (AI8? 0131) required. R-A 21204-021-27 -RB NMP-ES-024-501 S10V2U068 NRI 95% Code Coverage. R1.20 12" PIPE TO TEE R*A 21204-023*18-RB NMP-ES-024-501 S10V2U044 NRI NA R1.20 6" ELBOW TO PIPE R-A 21204*023-19-RB NMP-ES-024-501 S10V2U029 NRI NA R1.20 6" PIPE TO ELBOW R*A 21204-023-20-RB NMP-ES-024-501 S10V2U030 NRI NA R1.20 6" ELBOW TO PIPE 3-2

Vogtle 2R14 - Examination Summary (Total Piping) Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat/Item S09V1 R-A 21205-001-2-RB NMP-ES-024-501 S10V2U065 NRI NA

R1.20 12" PIPE TO EXTENSION SLEEVE R-A 21205-001-3-RB NMP-ES-024-501 S10V2U066 NRI NA R1.20 12" EXTENSION SLEEVE TO PENETRATION HELB 21301-001-1-HELB NMP-ES-024-502 S10V2U027 NRI NA MS-BUTT 28" PENETRATION TO PIPE (TS 5.5.16) R-A 21301-001-1-RB NMP-ES-024-502 S10V2U069 NRI NA R1.20 28" PENETRATION TO PIPE (TS 5.5.16) HELB 21301-001-4-HELB NMP-ES-024-502 S10V2U028 NRI NA MS-BUTT 28" PIPE TO 29 y," PIPE (TS 5.5.16) -- C-C 21301-001-9 NMP-ES-024-401 S10V2MOO3 NRI NA C3.20 SUPPORT HOO2 --- HELB 21301-001-12-HELB NMP-ES-024-502 S10V2U053 NRI NA MS-BUTT VALVE TO 291/2" PIPE (TS 5.5.16) C-C 21301-001-13 NMP-ES-024-401 S10V2MOO2 NRI NA C3.20 SUPPORT HOO1 - -- HELB 21301-001-14*HELB NMP-ES-024-502 S10V2U054 NRI NA MS-BUTT 291/2" PIPE TO VALVE (TS 5.5.16) C-C 21301*107*6 NMP-ES-024-401 S10V2MOO9 NRI NA C3.20 SUPPORT HOO1 HELB 21305-060*2-HELB NMP-ES-024-502 S10V2UOO4 NRI NA FW-BUTT 16" PIPE TO 6" BRANCH CONNECTION (TS 5.5.16) C-C 21305-060*3 NMP-ES-024-401 S10V2MOO1 NRI NA C3.20 SUPPORT HOO1 HELB 21305-060-4-HELB NMP-ES-024-502 S10V2UOO5 NRI NA FW-BUTT 16" PIPE TO VALVE (TS 5.5.16) HELB 21305-060-7 -HELB NMP-ES-024-502 S10V2UOO2 GEO NA FW-BUTT 16" VALVE TO PIPE (TS 5.5.16) HELB 21305-060-8-HELB NMP-ES-024-502 S10V2UOO3 NRI NA FW-BUTT 16" PIPE TO PENETRATION (TS 5.5.16) R*A 21305-064-22-RB NMP-ES-024-501 S10V2U062 NRI NA R1.11 16" PIPE TO ELBOW R-A 21305-064-23-RB NMP-ES-024-501 S10V2U063 GEO NA

---

R1.11 16" ELBOW TO PIPE 3-3

Vogtle 2R14 - Examination Summary (Total Piping) Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat /Item S09V1 R-A 21305-064-24-RB NMP-ES-024-501 S10V2U064 GEO NA R1.11 16" PIPE TO NOZZLE 3-4

~~" ---"~ Vogtle 2R14 - Examination Summary (Total Equipment) Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat/Item S08V2 N-722 21201-B6-001-110-VT NMP-ES-024-202 S10V2V001 Accept NA B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907) N-722 21201-B6-002-110-VT NMP*ES-024-202 S10V2V002 Accept NA ~--- B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907) CoB 21201-B6-002-IR04 NMP-ES-024-S13 S10V2UOS8 Accept NA C2.22 MAIN FEEDWATER NOZZLE INNER RADIUS C-A 21201-B6-002-W03 UPPER SHELL BARREL 'C' TO TRANSITION CONE NMP-ES-024-S16 S10V2U047 RI RI - Code Acceptable C1.10 WELD (98-V005) CoB 21201-B6-002-W19 NMP-ES-024-401 S10V2M011 NRI 80% Code Coverage. Relief Request C2.21 16" MAIN FEEDWATER NOZZLE TO SHELL WELD NMP-ES-024-S16 S10V2U060 RI required. RI- Code AcceQtable CoB 21201-B6-002-W26 NMP-ES-024-401 S10V2M010 NRI 80% Code Coverage. Relief Request C2.21 6" AUX. FEEDWATER NOZZLE TO SHELL WELD NMP-ES-024-S16 S10V2UOS9 NRI reguired. N-722 21201-B6-003-110-VT NMP-ES-024-202 S10V2VOO3 Accept NA B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907) N-722 21201-B6-004-110-VT NMP-ES-024-202 S10V2V004 Accept NA B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907) N-722 21201-V6-001-BMI-BMV NMP-ES-024-208 S10V2V007 Accept NA B15.BO RPV BonOM HEAD INSTRUMENTATION BMV -- "~ B-N-1 21201-V6-001-101 NMP-ES-024-203 S10V2V021 Accept NA B13.10 VESSEL INTERIOR --- B-N-1 21201-V6-001-102 NMP-ES-024-203 S10V2VOO8 Accept NA B13.CH VESSEL CLOSURE HEAD INTERIOR (FSAR 5.3.3.7) --- ~~ B-A 21201-V6-001-W01 NMP-ES-024-S03 S10V2U033 NRI NA B1.21 CLOSURE HEAD DOME TO TORUS WELD

---

B-A 21201-V6-001-W02 NMP-ES-024-401 S10V2M008 NRI NA B1.40 CLOSURE HEAD TORUS TO FLANGE WELD NMP-ES-024-S03 S10V2U034 NRI

B-A 21201-V6-001-WOB NMP-ES-024-S03 S10V2U03S NRI NA B1.22 CLOSURE HEAD TORUS MERIDIONAL WELD AT 45*
B-A 21201-V6-001-W09 NMP-ES-024-S03 S10V2U036 NRI NA B1.22 CLOSURE HEAD TORUS MERIDIONAL WELD AT 135 0
B-A 21201-V6-001-W10 NMP-ES-024-S03 S10V2U037 NRI NA B1.22 CLOSURE HEAD TORUS MERIDIONAL WELD AT 2250 3-5

Vogtle 2R14 - Examination Summary (Total Equipment) Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat/Item S08V2 B-A 21201-VS-001-W11 NMP-ES-024-503 S10V2U038 NRI NA B1.22 CLOSURE HEAD TORUS MERIDIONAL WELD AT 3150 ~ ---- B-K 21201-VS*001-W205 50% Code Coverage. Relief Request NMP-ES-024-401 S10V2MOO7 NRI B10.10 LIFTING LUG 120 DEG required. N-722 21201-VS-001*W33*BMV NMP-ES-024-202 S10V2V016 Accept NA B15.90

-----~~-----

OU,.LET NOZZLE N1 SAFE END WELD BMV N-722 21201-V6-001-W34-BMV NMP-ES-024-202 S10V2V016 Accept NA B15.95 INLET NOZZLE N2 SAFE END WELD BMV N-722 21201-VS-001-W35*BMV NMP-ES-024-202 S10V2V017 Accept NA B15.95 INLET NOZZLE N3 SAFE END WELD BMV N*722 21201-V6-001*W3S-BMV NMP-ES-024-202 S10V2V017 Accept NA B15.90 OUTLET NOZZLE N4 SAFE END WELD BMV N-722 21201-V6-001-W37 -BMV NMP-ES-024-202 S10V2V018 Accept NA B15.90 OUTLET NOZZLE N5 SAFE END WELD BMV N-722 21201*V6-001*W38*BMV NMP-ES-024-202 S10V2V018 Accept NA

B15.95 INLET NOZZLE N6 SAFE END WELD BMV N*722 21201-VS*001*W39*BMV NMP-ES-024-202 S10V2V019 Accept NA B15.95 INLET NOZZLE N7 SAFE END WELD BMV N-722 21201-V6-001-W40-BMV NMP-ES-024-202 S10V2V019 Accept NA B15.90 OUTLET NOZZLE N8 SAFE END WELD BMV B-D 21201*VS-002*IR-01 NMP-ES-024-513 S10V2UOO6 Accept NA B3.120 6" SAFETY NOZZLE INNER RADIUS B*D 21201-V6-002-IR-04 N MP-ES-024-513 S10V2UOO7 Accept NA B3.120 6" RELIEF NOZZLE INNER RADIUS --- --- B-D 21201-V6*002-IR-06 NMP-ES-024-513 S10V2U026 Accept NA B3.120 14" SURGE NOZZLE INNER RADIUS B-B 21201-V6-002-W01 75% Code Coverage. Relief Request NMP-ES-024-516 S10V2U022 NRI B2.11 UPPER HEAD TO UPPER SHELL WELD reQuired. B-B 21201-V6-002-W06 NMP-ES-024-516 S10V2U023 NRI NA ,---_B2.12 UPPER SHELL LONGITUDINAL WELD 3-6

Vogtle 2R14 - Examination Summary (Total Equipment)

Exam/Cal ASME Examination/Area Examination Sheet Section XI Results Remarks (Sort) Procedure(s) No(s). Cat /Item S08V2 B-D 21201-VS-002-W10 NMP-ES-024-401 S10V2M004 NRI 51.8% Code Coverage. Relief I B3.110 UPPER HEAD TO 6" SAFETY NOZZLE WELD NMP-ES-024-516 S10V2U009 NRI Request required. ] B-D 21201-VS-002-W11 NMP-ES-024-401 S10V2M005 NRI 51.8% Code Coverage. Relief I B3.110 UPPER HEAD TO 6" SAFETY NOZZLE WELD NMP-ES-024-516 S10V2U011 NRI Request required. B-D 21201-VS-002-W16 NMP-ES-024-401 S10V2M006 NRI 15% Code Coverage. Relief Request I B3.110 14" SURGE NOZZLE 2WELD TO LOWER HEAD NMP-ES-024-516 S10V2U025 NRI required. -N-729 21201-VS-CRDM(VT-2) NMP-ES-024-202 S10V2V015 Accept NA B4.10 VT2 VESSEL CLOSURE HEAD EXTERIOR C-C 21205-ES-002-W03 NMP-ES-024-301 S10V2P001 NRI NA C3.10(2) HEAD TO SUPPORT SKIRT WELD C-C 21205-PS-001-W01 , NMP-ES-024-301 S10V2P002 NRI NA C3.30 INTEGRALLY WELDED SUPPORT ATTACHMENT C-C 21208-P6-002-W03 70% Code Coverage. Relief Request NMP-ES-024-301 S10V2P003 NRI

 ~.~~ ~TEGRAlLY WELDED PUMP SUPPORT BRACKET                  ---           --

required. 3-7

Vogtle 2R14 - Examination Summary (Total Supports)

---

ASME Exam/Cal Examination/Area Examination Section XI Sheet Results Remarks (Sort) Procedure(s) Cat /Item No(s). F-A 21201-V6-002-H01 NMP-ES-024-203 S10V2VOO9 SAT F1.40(21 SUPPORT SKIRT - F-A 21201-V6-002-H02 NMP-ES-024-203 S10V2V010 SAT N/A F1.40(2) SEISMIC RESTRAINT --- F-A 21201-V6-002-H03 NMP-ES-024-203 S10V2V011 SAT N/A F1.40(2) SEISMIC RESTRAINT F-A 21201-V6-002-H04 NMP-ES-024-203 S10V2V012 SAT N/A F1.40(~1 SEISMIC RESTRAINT F-A 21201-V6-002-H05 NMP-ES-024-203 S10V2V013 SAT N/A F1.40(2) SEISMIC

---

RESTRAINT --- F-A 21201-V6-002-H06 NMP-ES-024-203 S10V2V014 SAT N/A F1.4Q(21 SUPPORT STEEL F-A 21301-001-HOO1 NMP-ES-024-203 S10V2VOO5 SAT N/A F1.20U(2) UNDERSUPPORT F-A 21301-001-HOO2 NMP-ES-024-203 S10V2VOO6 SAT N/A F1.20G(2) '-------- STRUT 3-8

lABD INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

SYSTEM PRESSURE TESTS

SYSTEM PRESSURE TESTS The following system pressure tests were performed on Class 1 and Class 2 components after the last refueling outage (2R13) through the completion of the fourteenth refueling outage (2R14). The system pressure tests indicated include system leakage tests for:

Class 1 components (IWB-2500-1, Examination Category B-P),
Class 2 components (IWC-2500-1, Examination Category C-H) not required to operate during normal plant operation which are identified as 84003-203 through 84003-221, and
Class 2 components (IWC-2500-1, Examination Category C-H) required to operate during normal plant operation which are identified as 84003-2AR through 84003-2CS.

Boundaries for these system pressure tests are described in the Pressure Test Plan (Inservice Inspection Plan - Volume 3). Examination results are discussed in the applicable sections of this report document. The examination data for these system pressure tests is available at the plant site for review upon request. System Pressure Tests Test 1.0. Exam Cat I Test Description Item No. 14910-201 B-P/B15.10 Class 1 System Leakage Test 84003-203 C-H I C7.10 Penetration 32 (High Head Safety Injection to Cold Legs) System Leakage Test 84003-206 C-H I C7.10 Penetration 33 (Safety Injection to Hot Legs 1 & 4) System Leakage Test 84003-207 C-H I C7.10 Penetration 31 (Safety Injection to Hot Legs 2 & 3) System Leakage Test 84003-209 C-H I C7.10 Penetration 56 (Residual Heat Removal to Hot Leg Injection) System Leakage Test 84003-210 C-H I C7.10 Safety Injection Pump Suction System Leakage Test 84003-211 C-H I C7.10 Residual Heat Removal to Chemical and Volume Control Suction System Leakage Test 84003-214 C-H I C7.10 Turbine Driven Auxiliary Feedwater Pump 1302-P4-001 System Leakage Test 84003-218 C-H I C7.10 Residual Heat Removal Train A Suction Piping in Encapsulation Tank System Leakage Test 84003-219 C-H I C7.10 Residual Heat Removal Train B Suction Piping in Encapsulation Tank System Leakage Test 84003-220 C-H I C7.10 Containment Spray Train A Suction Piping in Encapsulation Tank System Leakage Test 84003-221 C-H I C7.10 Containment Spray Train B Suction Piping in Encapsulation Tank System Leakage Test 84003-2AR C-H I C7.10 Residual Heat Removal Train A System Leakage Test 84003-2AS C-H I C7.10 Residual Heat Removal Train B System Leakage Test 84003-2CI C-H I C7.10 Auxiliary Feedwater System Leakage Test With Pump 1302 P4-002 (Train B) Operating 84003-2CJ C-H I C7.10 Auxiliary Feedwater System Leakage Test With Pump 1302 P4-003 (Train A) Operating 84003-2CS C-H I C7.10 Residual Heat Removal Cleanup System Leakage Test 4-1

TABE INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

REPORTABLE INDICATION

SUMMARY

REPORTABLE INDICATION

SUMMARY

SNC defines "Reportable Indications" as indications that have been evaluated and do not meet the applicable ASME acceptance standards. The following table lists, as a minimum. components meeting the "reportable" definition. but may also include other instances at SNC discretion. These conditions were observed during the examination of either Class 1 or 2 components during the fourteenth (14th) maintenance/refueling outage at VEGP-2 (referenced attachments are available at the VEGP plant site for review upon request): INF NO. andlor Affected Component/Area INF Disposition Condition Report None N/A N/A The Indication Notification Form(s) constitute only those reportable indications or conditions observed during the SNC M&IS Department scope of work. Any reportable indications or conditions observed by VEGP Site personnel or outside contractors during their scope of work should be identified by/to the VEGP Site in report document(s) which are referenced herein. 5*1

TABF OWNER'S REPORT FOR REPAIR AND REPLACEMENTS (ASME FORM NIS-2)

OWNER'S REPORTS FOR REPAIRS OR REPLACEMENTS (FORM NIS-2) The following Owner's Reports for Repairs or Replacements (Form NIS-2) are provided for work activities documented at VEGP-2 since the last maintenance/refueling outage (2R13) through the completion of the fourteenth maintenance/refueling outage (2R14). Reports are identified by their respective traveler number which is denoted on each of the NIS-2 reports. The originals of the NIS-2 reports are filed with their respective traveler packages at the plant site. Copies of these forms are included to satisfy ASME Code requirements. Only those NIS-2 reports applicable to VEGP-2 are included in this report document. Any attachments, e.g., code data reports, etc., referenced in the NIS-2 reports will be made available for review upon request at the plant site. It should be noted that even through Site procedures may require the use of an NIS-2 form, Code Case N-508-3 "Rotation of Service Snubbers and Pressure Relief Valves for the Purpose of Testing" does not require the use of an NIS-2 form provided certain conditions are met. Therefore Repair/Replacement activities not requiring I\IIS-2 forms per Code Case N-508-3 are excluded from this Owner's Report. The NIS-2s listed below were performed during the Third Inspection Interval for the following travelers which are included herein: 07215 09017 10003 10034 08062 09082 10018 10035 109042 09087 10027 10036 09063 09090 10030 10042 09064 09092 10031 10043 09065 10001 10032 10044 09067 10002 10033 10046 6-1

FORM NI5-2 OWNER'S PLACEMENT ACTIVITY All Required S<<:donXI T~v~'~0~~'~5 ________

1. awn... August 28, 2009 Name 40 Invernsss Centftr Pal*way, BinTIlnghap. AL of Addr...

2. Plant Vogtle EIecITfc Genetatlng PIBnf Unit 2 WO 2070203701 RepalrJR.placement OI'ganlzatlon P.O. No** Job No., etc.

3. Wortc Performed by __.....;;Main=:.:.:tenance::.:;:~-=D!pattment===:...-_ TYPe Code Symbol Stamp NlA Name AuIhor1aIIon No. NlA Plant VogJI& E~~D" __________________ ~w.~~ ____________

Addr...

4. IcIentlfIc.ltlon of System 130' / MaIn StBam System

5. (a) AppllClible Con8b'uctlon Code 1f177 Edlllon. Wlntsr 1977 Addend8, __-...:~.::.:a::-.._ Code Cae (b) Appllcabte Edition of SectIon XI IJIoed for RepairlReplecement ActIvity 2001 ad* 2OO3ldd.

(c) AppIlC8ble SectIon XI Code CaN(s) 6.. Identlflc.ltlon Of Componen" N.ItIonai Cof'nlCted. ASMECode Nsmeof Name of M.nufactuf... BoIird Other V.... ~.or Stemped Component Menllfactur... SerWNo. No. IdentlflCllllon Bult lnetalled fY_orNo) RELIEF VALVE CONTROL 23469-1-4 /\VA 2-PV-3(}30 1982 CORRECTED YES COMPONENTS, INC.

7. Deacrlptlon of Work -.:.;RBets=:=:C8d=..:./he::::...::va=lve.:.:::.JpI~UQ=-:...__________________________________________

-        8. T. .t Conducted:                      H~roetatlc 0 Oth...         0           Pressure PneumatlcO     Nominal Operating Pr...ureD psi Test Temp. _______ OF Exemptl!]

CERnFICATE OF COMPLIANCE I centty that the atatemente made In the raport .... corrm and th.t thla conform. to the requlremente of the ASME Code, SectJon XI. Type Code Symbol Stemp /\VA ______ ....:W;=~:..._ _ _ _ _ _ Expiratton DatIl /\VA GJI.Il Signed '1/'/0' 8~1~-----=~~~~~~------------------------------- CERTIFICATE OF INSERVICE INSPECTION I. the underalgned. holding a Vlllld commlaalon leauecI by the NatIonal Boerd of Boller and Preaaure V..... Inspectona

      .nd the 8tltta or Province of                  Gt!omia                         and emplGylld by        HattfotrI Steam Boil" IaspectJqn rod 1nsurB!!Cf Co. of ConatctJCyt of ~ have In~ the componante deecrlbed In thl. awn...** Report during the period                                                                              101U07 to     JfifZ;itiOi:          and .tete that to the beat of my knowledge end belief. the Owner has performede-xam---':.IfIn~ado~n-e-en-d":"'tII~ke-n-1 correctI'III menu.... deecrlbed In this Own...** Fleport In accordance with the requlremente of the ASME Coda. Secdon XI.

By .'gnlng thla C*tlflcate neither the Inspector nor hi. emplo~ m.... anr warranty. exp!'ellMd or fmplhKI. concerning the examinations and corractIVII meuu.... deacrlbed In thle Owner'. Fleport Furthermo.... ne1th... the lnapec:tor nor his employer .hall be liable In anr manner for anr personal Inlury or property damage or a 1088 of anr kind arts/ng from or connactad with thla lnepectJon.

       ~iCG ~~          lnapecmr's    ~...

7~n.!&_-:-::::-:-_=__:_-__:_::_:_-___::__-- Commlaalone -L1!t:A1?:-:-... Natlo"* Board. St.tf8. Province and Endoreementa

FORM NI8-2 OWNER'S REP01\m~MAIEMENT ACTIVITY AsReqUlredBYThep~~xl . Traveler. 08062

1. Owner Southem Nuclear Operating Company Date AprlI19,2010 Name 40 Invemess Center Parkway, Birmingham. AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro. GA 3Q83O 2052956501 Address RepalrJReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp /iliA Name Authorlution No. /iliA Plant Vogtie Expiration Data /iliA Addre..

4. Identification of System 1501/ Containment Bldg Air Cooling System

5. (a) Applicable Construction Code ASME Sec 1111917 Edition, Winter 1977 Addenda, _.-Nl.:.=..:.,I1=--_ Code Case (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _ _2... 00...1I..e::d...,..2~003~.!:lAd_.___

(c) Applicable Section XI Code Caae(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Vear Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CNMT CVI 04A078 tvA 2-1501-A7-OOHJOO 1987 CORRECTED YES COOLING UNIT

7. Oescriptlon of Work Replaced (4 each) manifold lateral movement support u-bolts and nuts.

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[!J Other 0 Pressure psi Teat Temp. _ _ _ _ _ OF

9. Remaru_S~e~e~/~tem~~7___________~~~~~__~~~-;~~__-.-~~~~~~______________

Applicable Manufacturer'. Oeta Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the atatements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp tvA Certiflcate ~,t~on o. ________Nl.;:.:I1..:...______ Explratlon Date tvA

                       ~                                                                                          Wz., IltO iti',.
    ,,'

.DfI,-.

       "  Signed
"~'r~----~~~~~~~--------__----__----------------~

Ownerorwner's Designee, Title Team Leader Date

                                                                                                             -.I....I...:::;;;;.....I:~---

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commlaslon lesued by the National Board of Boller and Pressure Vessel Inspectors and the stete or Province of Georgia and employed by Hartford Steam Boiler InsDeCtloo snd Insurance Co. of Connecticut of t:J.iJg!.o~~cut have Inspected the components described In this Owner's Report during the period _.....I8I2.u."hr.t.;1081o!lL-_ _...,..._1 to 4'"klP ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taun corrective measurea described In thia Owner's Report In accordance with the requirements of the ASME Code, SectIon XI. By signing this ce leate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and correctl easures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be Ie In any manner r an ersonal Injury or property damage or a loss of any kind arising from or connected with this lreMCotID,

         ~....oc::::::::OII-~~--II-...".,-..:,...::.....::-;;;".-----

Gr:t OOl{S Commissions --':N':'"a-::tl;-o-na-:,:-:S:"o-a""rd":','-:S:":ta-te:--,P=r-o-v'!-In-ce-a-n-:d'-:E:"n-d;-o-rs-em-e-n'":ts---

1. Owner SOuthem Nuclear OperatIng Company August 5, 2009 NMIe 40 InvsrTIIJSS Cent9r Patfcway. BItmIngham. AL of Adc:lrMa

2. Plant Vogt/! ElBctrlc Generating Plsnt Unit 2 NMIe Wa}'!?!Sbol'O, GA 30830 wo 206iJ333001 Addr. . AltpalrlReplacement OrganluUon P.O. No., Job No., etc.

3. Work Performed by _......;;.MaI:=o""terIa=:oI'lCe:-"".;;:.C?epaftm6n==.__t____ Type Code Symbol Stamp NlA NIIIM ~No. NlA ExpIratlOll Data _ _ _ _ _ _ _ _ _....;.;NI..;...;(A_ _ _ _ __

PIsnt VogtI!

4. Identification of System 12241 Back-Flushsble F1nsrs Sy5fems

5. (a) Applicable CoMtruc:tion Code 1977 Edition, Winter 1977 Addenda. _-..:.:n1...;;:.'B__ Code ee..

(b) AppIlClibl. Edition of SectIon XI URd for RepelrlReplacement ActIvity _<t:2C!OIIX.Il.J1ed!IiIW'2OO3liXXlU!1tdd-.._ _ (c) Applicable SectIon XI Code CUe{s) S. IdentlflClltion Of Componenta NatIonal Corrected, ASMECode Nemeof Nemeof Manufacturer &oerd Oth. Ve. Removed,or Stamped Compc)Mnt Manufllctu,. Serial No. No. Identification Built Installed {V_orHo) WATER COPES-VULCAN 8220-95439-1-4 2359 2-HV-41323-B 1983 CORRECTED YES CONTROL VALVE

7. Descrlptlon of Work Replaced plug on 2-HV-41323-B.

8. Teat Conducted: Hydrostatic 0 PneumldlcD Nominal Oplll1l'dnlJ Pr.aure[!1 ExemptD Other 0 Presaure NOP p8i Test Temp. _ _ _ _ _ Of CERTIFICATE OF COMPLIANCE I certify that the statements made in the report ere correct and that thia conforma to ttl. requirements of the ASME Code, SectIon XI.

Type Code Symbol Stamp NlA ~ :;:cate~ NlA NlA Supennt6ndent &:on Datef_tJ?o r 9~/~~__________Owri~_~ ____ ~.,~'._DN._I~gln_.~.T~M_.____________________________________________________

..

CER11F1CATE OF INSERVICE INSPECTION I, ttl. underalgned, holding a valid commlealon I..ued by the National Board of Boiler and Prenur. V....,lnspector. and the state or Province of G!!IOIl1ja and employed by Hattfpcd Sttam Boller lnsptCtjon BOd 'nsuf1Jl!t;f Co. of Cqooscttcut of I::II/JfJIIJI. ~ heve inapected the compenente deecrlbed In this OWner'. Report durlnlJ the parloct _~.-.._ _-:---:--.. to y;;rh';o69: and &tate thet to the belli of my knowledge and bell." the awn. h.. performed eumlnetlone and taken corrective mea.urea deecrlbed In thle Owner'e Report In accordence with the requlrementa of the ASME Code, Section XI. By signing this certificate neIth. the IrutpeCtor nor hie employer makea sny warrtmty. expressed or implied. co~nlng the examinations and lie measures deacrfbed In this Owner'a Report. Furthermore. nelth... the Inspactor nor hi. employer ....., 1M....... In ny ma f ny personal Inlury or property damage or a Io8a of any kind arising from or connected with this r~~~;pt~~iiUN--- s SignatuN Commissions -=~Gf+/-~,...::.-,~O_O---,-:.t.;..(S=----,,----_ NetionaJ Board, State, Province and EndorMmenta Date 1-;?.;l- 0 2

FORM NIS-2 OWNER'S REPORT FOR ORIGINAL ' REPAIRIREPL~QMENT ACTIVITY M Required By The Provisions Of The ASME Code Section XI Travelert--=0.::.906=3~ _ _ __

1. Owner Southem Nuclear Operating Company Date March 24, 2010 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtie Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 WO 2090198301 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Southem Nuclear Operating Co. Type Code Symbol Stamp tVA Name Authorization No. tVA 44 Inverness Center Pkwy, Suite 148, Expiration Date tVA Birmingham, AL 35342 Address

4. Identification of System 1301/ MAIN STEAM SYSTEM

5. (a) Applicable Construction Code ASME Sec. III, 19n Edition, Winterr 1977 Addenda, _......;N!.:..::.:.."':...-_ Code Case (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _ .....200~lLed:IQI:.*.III2003_'-JaiUdlLlld:..._ _

(c) Applicable Section XI Code Case(s)

e. Identification Of Components National Corrected, ASMECode Nemeof Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed ('(esor No)

ATMOSPHERIC CONTROL 23469-1-3 /'VA 2PV302O 1982 INSTALLED YES DUMP VALVE COMPONENTS

7. Description ~f Work Replaced valve plug assembly.

8. Test Conducted: Hydr08fatJc D PneumatlcD Nominal Operating PressureD Exempt[!]

Other D Pressure pal Test Temp. _ _ _ _ _ OF

9. Remarks _s~ee~/~te~m~7_____________~~~~~ __~~~-= __~__~__~_~~~___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp /'VA

                                               /-________""'NJ.:..;;.;.."-_ _ _ _ _ Expiration Date                                             NlA I.e. e. Signed                                                                 rintendent      Date        'flcJ.,/to

'~1po~------~~~~~~~~------------------------------------ CERTIFICATE OF INSERVICE INSPECTION I, the undarslgned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Provlnca of Georoia and employed by Hartford Steam BoUer losoectloo and Insurance Co. of Connecticut of Hadlpr4.Ji.oo.qfJ!;Jjcut have Inspected the components described In thla Owner's Report during the period 1 Ul9l2009 to.ft=j ido , and state that to the beat of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing th rtiflcate neither the Inspector nor his employer makea any warranty, expressed or Implied, concerning the

          ----=O"'-ns and corr               measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall or      y personal Injury or property damage or a loss of any kind arising from or connected with this r-.....-""'-+~.;...'-~:--:::~I_:_--..:.----

Inspector's Signature Commissions _:::-;--:~G11~~'-:--::,.,..C>.."..-*~~{...,l:_S-__:_=__:__-~~-- National Board, State, Province and Endorsements

                                      '-,-V_

D8te---<fJ..---...&-.:11,--

FORM NIS-2 OWNER'S As Required "nr~ IA fA.1 PLACEMENT ACTIVITY Ul£1Dl1!W: SectIon XI Traveler. 09064

1. Owner Southem Nuclear Operating Company Date April 19. 2010 Name 40 Invem8SS Center Parkway. Birmingham. AL Sheet of Address

2. Plant Vogt/e Electtfc Generating Plant Unit 2 Name Waynesboro. GA 30830 2090280101 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Westinghouse Electric Co. Type Code Symbol Stamp NlA Name AulhorizIItlon No. NlA 44 Invemess Center Pwy.

Suite 148 &piradon Date NlA Birmingham, AL. 35242 Address

4. Identification of System 1201/ Reactor Coolant System

6. (a) Applicable Construction Code ASME Sec. III. 1971 Edition, Winter 1972 Addenda, _--,N/,..;;;.;..",,,--_ Code Case (b) Applicable Edition of SectIon XI Uaad for RepalrlReplacement ActivIty 2001 ed. 2003 add, (c) Applicable Section XI Code Case(s)

6. IdentIfication Of Componente National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yas or NoJ PUMP WESTINGHOUSE 4-9744D35-G01 23 2-1201*P6-002 1986 CORRECTED YES ELECTRIC CORP.

7. Description of Work The number 2 seal housing assembly was replaced on pump 2* 1201*P6-002.

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressurel:!] Exempt 0 Other 0 Pressure psi Test remp. _ _ _ _ _ Of

9. Remarks -'S:;;88=-I"'tem:.:.:.;....;..7_ _ _ _ _ _ _""7'--:-:c--::-:--:-=-_.,.-_--:--=_-=-_...,.....,--::--:---:c--:--_ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statemente made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA jplJiqlll'1'llo. _ _ _ _ _ _ _N/,;;.;:;.;."--_ _ _ _ _ Expiration Date NlA ...t'~{ i Signed Team Leader Date llfzohq) __ O~~~---------- ----------~--~n~ee~,TI--tl~e--------______--------------------------------------__~ CERTIACATE OF INSERVICE INSPECTION I, the undersIgned, holding a valid commission lsaued by the NatIonal Board of Boller and Pressure V....I Inspectors and the state or Province of Georoia and employed by Hartford Steam Boiler InSPeCtion and Insurance Co. of Conaectjcut* of ~cut have Inspected the components described In this Owner's Report during the period 211112010 to , and state that to the best of my knowledge and belief, the Owner hes performed examinations and taken correctIve measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.

                    . By signing this rtlficata neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corr                              me suras described in this Owner's Report. Furthermore, neither the Inspector nor hIs employer shall Ie I any mann                           r      personal Injury or property damage or a loss of any kind arising from or connected with this y...,'--,....c;.;L...,.;"Jr----I~~_.....=--.t......::...loL.lll!:..--       CommIssions   ~:-:-:::-_:-::GtJ~-;-::::-:-O_:__O=_/~/-c:;-_:_:::--:----:---

National Board, State, Province and Endorsements Date __~~~__~________

FORM NIS-2 OWNERORKtttWiEPLACEMENT ACTIVITY As Requl B Code Section XI Traveler" 09065

1. Owner Southern Nuclear Operating Company Dillie AprlI16,2010 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 2090781701 Address RepalrJReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Westinghouse Electric Co. Type Code Symbol Stamp NlA Name Authorization No. NlA 44 Inverness Center Pwy. , Suite 148 Expiration Date NlA Birmingham, AL 35242 Address

4. Identification of System 1201/ Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. III, 1971 Edition, Winter 1972 Addenda, _ _Nl.:.;;.:.:4=--_ Code Case (b) Applicable Edition of Section XI Used for Repalr/Replacament Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s}

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vesor No)

PUMP WESTINGHOUSE 1-9744D35-G01 23 2-1201*P6-004 1986 CORRECTED YES ELECTRIC CORP.

7. Description of Work The number 2 seal housing assembly was replaced on pump 2*1201*P6*004.

8. Test Conducted: Hydrostatic 0 pneumatlcD NomInal Operating Pressure[!] ExemptD Other D Pressure psi Test Temp ..,--_____ OF

9. Remarks ~S~ee~/~tem~~7____________~~~~~__~~~-=~~ __~~~~~~~__________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA

                                             , _________-.;;.;NI.:;.;:4..;....______ Expiration Date                                    NlA rf!)!t Signed                                                                Team Leader        Date        tf{Z-oIL       0
 ~~~----~~~~~~~------------------------------~

CERTIFICATE OF INSERVICE INSPECTION I. the undersigned, holdIng a velld commission Issued by the National Board of Boiler and Pressure Vessel Inspectore and the state or Province of Georgia and employed by Hartford Steam Boiler Inspaction and InSUrance Cq. of Connecticut of ~df!C~ have Inspected the components described In this Owner's Report during the period 2/111201Q to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures ibed in this Owner's Report In accordance with the requIrements of the ASME Code. SectIon XI. By signing this e iflcate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the tlons nd cor tl aur.s described In thla Owner's Report. Furthermore, neither the Inspector nor his employer shall liable f r y personal Injury or property da ge or a loss of any kind arising from or connected with this Ion. 00

FORM NI5-2 OWNER'S R AaRequlred nnr~lll J\ r B~JI~ectlonXI LACEMENT ACTIVITY Tmve~r'~~~~7 _________

1. Owner Southern Nuclear Opemting Company Data March 29. 2010 Name 40 Inverness Center Parlcwliy, Birmingham. AL Sheet 1 of Address

2. Plant Vogt/e Electric Genemting Plant Unit 2 Name Waynesboro. GA 30830 WO 2090945101 Address RepalrlReplacament Organization P.O. No.~ Job No., etc.

3. Work Parlormed by Maintenance DBpattment Type Code Symbol Stemp NlA Name Authorization No. NlA Plant Voatle Expiration Date NlA Address

4. Identification of System 1208 / Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. III, 1977 Edition, Winter 1977 Addenda, _..:.N.:..-::.24.:.,:9-;,...:..1_ Code esse (b) Applicable Edition of SectIon XI Used for RapalrlRapiacament Activity 2001 ed' 2003 edd.

(c) Applicable Section XI Code case(s)

8. Idantfflcstlon Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 10703 NlA 2-1208-047-H604 1989 REMOVED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 18122 NlA 2-1208-047-H604 1989 INSTALLED YES SUPPORT PRODUCTS

7. DeecrlptJon of Work PSA-112 snubber serial no. 10703 was replaced with PSA-112 snubber ser1a1 no. 18122 to support surveillance tasting.

8. Test Conducted: Hydroatatlc 0 PneumaticO Nominal Operating PresaureO Exempt 00 Other 0 Presaure psi Test Temp. ______ OF

9. Remarks ~S~ee~n~Qm~.:..7_______~~~~~_~~~-= __ __

                                                                                                           ~      ~~~         __ ____ _____________
                                                                                                                                 ~       ~

Applicable Manufacturer's Dsta Reports to be attached CERTIFICATE OF COMPLIANCE I certlfy that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA NlA Expiration Data NlA

 , J.; Signed ~.........,,..,.....,~~~,......,,,.~_-=~=:.:.::rln~tenden=;.;.:,..t Il                                                                                         Dsta        $It 7lto

-P\\V '. '---_ _

    ~v.                    ..-;=;;...;;;;.;..=;;;.;...;..;;;.=.J=...;.;;;;.;;~ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ____
,'\                                                                CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission lsaued by the National Board of Bollar and Prasaure Vessel Inspectors and the state or Province of               Georgia          and employed by         Hartford Steam Boiler /nspectjon and Insurance Co. of Connecticut of ~U1. have Inspected the componants described in this Owner's Report during the period _ ...Q""V30/Q9>o!l4.                                           _ _ _ _..,-~-1 to ~;J.t==fOJ and atsta that to the beat of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.

By eigning this certificate neither the Inspector nor his employer makes any warranty, exprassed or Implied, concerning the examinations and corr ures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall 1000""",..,e In y personal Injury or property damage or a loss of any kind ariSing from or connected with this I pecti n

           ~=~---;:.::..-..g....::::.~,...---=-_ _"':;:;"_                   Commlsalone     ---::-:-:,:,,--:-G1t=--:-::::-O-::--:O~/:-,-(_0....;;.....=-=--:--_-:--_ _

National Board, Stata, Province and Endorsemants

FORM NIS-2 OWNER'S REORIGWCEMENT ACTIVITY A:s Required By The Provisions Of The ASME Code Section XI Traveler' --=c,;;..;;;.;...;....._ 09077 _ __

1. Owner Southern Nuclear Operating Company Date April 1. 2010 Name 40 Inverness Center Parkway. Birmingham. AL Sheet of Address

2. Plant Vogtfe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 WO 2090942901 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Dee!!.rtment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant Voatle Expiration Date NlA Address

4. Identification of System 1201/ Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. III. 1977 Edition, Winter 1977 Addenda, _..:.N.:..;-2::.'4.;,;:9-:;..,;..1_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-",200_1~ed",-=,-. .. 2003_'-laillldu:d!.l.-'_ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Hameof Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 22 NIA 2-1201-053-HOO6 1989 INSTALLED YES SUPPORT PRODUCTS

7. Oeacriptlon of Work AD-12503 snubber serial no. 133 was replaced with AlJ..12503 snubber serial no. 22 to support surveillance testing.

8. Test Conducted: Hydrostatic 0 pneumatlcD Nominal Operating PreseureD Exempt 00 Other D Pressura psi Test Temp. _ _ _ _ _ Of

9. RemarQ_See~~ne~m~7_________~~~~~_~~~-=~~ __ ~~~~~~~ _______________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I cartlfy that the statements made In the report are correct and that thla conforms to the requlrementa of the ASME Code, Section XI. Type Code Symbol Stamp NlA _ _ _ _ _--.;.N!..:.;~~_ _ _ _ _ Expiration Date NlA ,Jtk.\ICLSigned ~\l -_ _ _ -.:.~:..;:::..:.::::.:::.:...::.::::=::z:..:;:::::..:.:.:.:.:. erinteooent Date Lf{, 3 It p _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _....1 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of BoUer and Preaaura Veaeellnspectors and the state or Province of Georois and employed by Hsrtforc! Steam Boiler Inspection and Insurance Co, of Connectjcut of Ha have Inspected the components described In this Owner's Report during the period _ ....9I3O!1~~079"--_--:---:_1 to ,. , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correct ve m asuras described In this Owner's Report In accordence with the requlraments of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concemlng the examinations and carr :va measuras described In this Owner's Repart. Furthermore. neither the Inspactor nor his employer shall b In any man er or y personal Injury or property damage or a loss of any kind arising from or connacted with thia I

        ~_"""':::~~_-II-"""";:':-:-.L...:::""":::"'-                  ____                  Commiseions    _:-:-.,--..;;:G4:;:.....::.......,.~O_.",U--.:../,.;..f-5_---,..",--:--

National Board, State, Province and Endorsements _____

FORM NIS-2 OWNER'S REon.r~I~CEMENT ACTIVITY As Required B Y T U J t : I . \ 7 I Ion XI Tmvmer'~~~=-_________

        ,. Owner          Southem Nuclear Operating Company                             Date                                           AprilS, 2010 Name 40 Invemess Center Pat#cway, Birmingham, AL                   Sheet                         1                       of Address

2. Plant Voaffe EIBCtrlc Genemting Plant Unit 2 Name Waynesboro, GA 30830 WO 2090941301 Address RepalrlRep'acement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name AuIhorizatIon No. NlA Plant VggJJe Expll'llllon D1Ita NlA Address

4. Identification of System 1301/ Main Steam System

5. (a) Applicable Construction Code ASME Sec. III. 1977 Edition, Winter 1977 Addenda, _..;.N;;.,.-2;;;,,4,;..;9-;...;.,.1_ Code case (b) Applicable Edhlon of Section XI Used for RepalrlReplacement ActIvity _ ...2""OO""'....e....... cI ..::2003..,add....._

                                                                                                                            ..... ......       _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Vear Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vesor No)

PIPE PULLMAN POWER 30700660I030 NlA 2-1301-D14-H010 1989 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work AD-S01 snubber serial no. 404 was replaced with Lisega snubbersen'ai no. 307006601030 to support surveillance testing.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exemptl:!]

Other 0 Pressure psi Test Temp. ______ OF

9. Remarks _S=.e::;;e::..:;:;lte""m~7_ _ _ _ _ _ _-:---;;c--:-:--::-::-_-::--::---;-=-:--;;;-_-:--:--::---::-:--::--:--_ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA Certlflcate:220r~_ _ _ _ _--:..;N!.=-'-)4-=--_ _ _ _ _ Expiration Date NlA JAdL ~\?II0L-Signed ~ __________~Own~~.~r~or~Ow~~n~er~'s~Des~~.ig~ln~ee~T~m=.~ Superintendent Date t.fiJ Lit a ______________________________________________________~ CERTIFICATE OF INSERVICE INSPECnON I, the undersigned, holding a valid commission Issued by the National Bosrd of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Insoectlon Snd Insumnce Co of Connecticut of ~~~on~C!l.t hava Inspected the components deacrlbed In this Owner's Report during the period 9I3Q/Q9 t o q .; . and state that to the beat of my knowledge and belief, the Owner has performed examinations and taken correc ve .a res described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing thi rtiflcate neither the Inspector nor his employer makes any warranty, expreased or implied, concerning the examinations and cor 8 ures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall Ie I y personal Infury or property damage or a 1088 of any kind arising from or connected with this N.~Mtctl4~Jf. r========+~~-:lJ'J~~...!.....c!...!...~!....-- Commissions ~~Gtl=-:~_O~O-:'--:-"(_'::t5~_:__-_:_=__:_-~-- National Board, State, Province and Endorsements Date_-'-_-=-....:...._:.-_ __

-- FORM NI8-2 oWNORlGlNAL.RlREPLACEMENT ACllVITY As Required By The Provisions Of The ASME Code Section XI Traveler'--=0908=:..;7_ _ _ __

1. Owner Southern Nuclear Operating Company AprlI14,2010 Name 40 InvetTJ8SS Center ParKway. Birmingham, AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 W02090941801 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenence ~artment Type Code Symbol Stamp NlA Name AutI'IoI'IQtIon No. NlA Plant Voatle Expiration Date NlA Address

4. Identification of System 1301 I Main Steam System

5. (a) Applicable Construction Code ASME Sec. III, 1977 Edition, Winter 1977 Addenda, _.:..:N:.,.:-2:.,;4;:::9-..,:1_ Code Case (b) Applicable Edition of SectIon XI Used for RepalrlReplacement Activity _ ..200&V.Jlwed~*..ti2003XX11uau.dgjd!&.-._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected. ASMECode Name of Name of Manufacturer Board Other Year Removed. or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 30500263113 NlA 2* 1301*126*H037 1989 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work AD-153L snubber serial no. 755 was replaced with Usegs snubber serial no. 30500263113 to suPPOrt sUNeillance testing.

8. Teat Conducted: Hydrostatic D PneumatlcD Nominal Oparatlng pressureD Exempt[!J Other 0 Pressure pai Test Temp. _ _ _ _ _ OF

     ~      Remarks      _S=ee~/~te~m~7_________~~~~~_~~~-=_~                                              __    ~~~                 __   ~~~          _______________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the etatements made In the report are correct and that this confont18 to the requirements of the ASME Coda, Section XI. Type Code Symbol Stamp NlA 7/____________N/.~:4;......______ Expiration Date NlA

~ Signed tJ/",IIO CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commlsaion lasued by the National Soard of Boller and Pressure Vessel Inspector.

and the state or Province of Georqia and employed by Hartford Steam BoU" Inspection and Insurance Co. of Connecticut of ~ ~ticut have inspected the components described In this Owner's Repon during the period _ .....9I3QA~~lI9l1!l"--_-.,.......,_1 to !'ft"-=/ 7=i U ,and state that to the best of my knowledge and belief, the Owner hsa performed examlnatlona and taken corrective massures described In this Owner's Report In accordance with the requlrementa of the ASME Code, Section XI. By signing this certificate nehher the Inspector nor his employer makes any warrenty, expressed or implied. concerning the Inatlons and cor saaures described In this Owner's Repon. Furthermore, neither the Inspector nor his employer shall II I ny ma ne f r ny parsonal Injury or property damage or a loss of any kind arlaing from or connected with this ect r:;;=,....."""-+-=:...-..pO:;;::;~,.,---L------ GA O~(-IS Commissions --:-Na:-:':tl-on';;"a-::I-=S=-oar""-d":".-=Sta:-:-":ta:--,Pr=-o-v-;-In-c-e-a-n-::d-=E::-n~d:-o-rse--m-e-n":"ts----

FORM NI5-2 OWNER'S PLACEMENT AC1"'VITV As Required 1~~Ift~""~~Sectlon XI Traveler'--=.0909O=:..::.-_ _ __

1. Own.r Southem Nuclear Operating Company Date Mareh 30, 2010 Name 40 Invemess Center Pat1cway. Binningham, AL Sheet 1 of Address

2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 WO 2072094101 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenancel2!!E.atfment TVI'M Code Symbol Stamp NlA Nam. AutMrlzation No. NlA Plant Voatle Expiration DatIl NlA Address

4. Identification of System 12081 Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. III, 1977 Edition, Winter 1977 Addenda. _.:.;N:.,.:-2:..,;49-=-:.1_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Actlvfty _-!i200-.:1wed=:,.,.:.2903_l-lai\olldl.lldl/o.._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components c' National Corrected, ASMECode Name of Name of Manufactur.r Board Other Yea, R.moved, or Stamped Component Manufacturer Serial No. No. Id.ntlflcatlon Built Installed (Yes or No)

PIPE PULLMAN POWER 30500235/018 NlA 2-1208-066-H019 1989 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work AD-43 snubber serial no. 1521 was replaced with LlSEGA-301856RC2 snubber serial no. 305002351018 to support surveillance testing.

8. Teat Conduct.d: Hydrostatic D PneumatlcD Nominal Operating PreasureD Exempt[!j Other 0 Pressure psi Test T.mp. _ _ _ _ _ OF

9. Remaru_S~ee~~/~~~7_____________~~~~~__~~~-=~~ __~~~__~~~____________________

Appllcabl. Manufacturer's Dsta Reports to be attached CERTIFiCATE OF COMPLIANCE I certify that the atatem.nta mada In the report are correct and that this conforms to the requir.menta of the ASME Code, Section XI. Type Coda Symbol Stamp NlA ________:.:N/.:.:.~.:......_______ Expiration Date NlA .t~\:~ -n~'\ Signed _=~-'!"-"-'H:it--"--:--=--:-_-=~-=-==""rin""t.::;.;Mde=n:..;;...t Date %,/, 0 I\) CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding s velld commission issued by the National Board of BoUer and Pressure Vessellnspectore and the state or Province of Gsotp/s and employed by Hartford Steam 80ller Insoection and Insurance Co. of Connectjcut of l:!JiJ!1fPIrJ.....Qon~ have Inspected the compon.nta described In this OWn.r's Report during the period 9/30109 to jf£.... U;.p;: and state that to the best of my knowledg. and bell.f, the Own.r hss performed .-x-a....m~l... natl~o'-n-s-a-n-d":""':'ta'":'k-.-nl corrective m.asures described in this Owner's Report in accordance with the requirem.nts of the ASME Code, Section XI. By signing th rtl neither the Inspector nor his employer makes any warranty, .xpressed or Implied, concerning the tlons and corr urea described In this OWn.r's R.port. Furthermor., n.lther the Inspector nor his employer shall b lIabl In any man personal Injury or property damage or a loss of any kind arlalng from or connected with this I pectlo I"'-"'-:;;'-+-..L.:--~--::--=-:-~~-"':"---- Commissions _"..,......,.........,...",GA_..,.....;,.....-O--",o_:-t_fS_...,...",-"..______ National Board. State, Provlnc. and Endorsem.nts Date_.......____---"'--=-_______

--

FORM NIS-2 OWNER'S R E P O _ M E M E N T ACTIVITY As Required By The P ..,Isl __ n XI Traveler. ___-......0,;;::;.-_ 09092 _ __

1. Owner Southem Nuclear Operating Company Date March 29, 2010 Name 40 Invemess Center Parkway, Birmingham. AL Sheet of Address

2. Plant VogtJe Electric Generating Pfant Unit 2 Name Waynesboro, GA 30830 WO 2072095201 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name AuthorIzatIon No. NlA Pfant Vogtfe Expiration Date NlA Address

4. Identification of System 13021 Auxiliary Feedwater System

5. (a) Applicable Conatructlon Code ASME Sec. III, 1977 Edition, Winter 1977 Addenda, _;;...;M""2_4... 9-...;.1_ Code Ca..

(b) Applicable Edition of SectIon XI Used for RepalrlReplacement ActIvIty _-J!200~l:..:ed_'..si2003:¥X:~a~dlllld!>.._ _ (c) Applicable Section XI Code C8ae(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Vear Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vas or No)

PIPE PULLMAN POWER 46164951002 NlA 2- 1302-107-HO10 1989 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work AD-16m snubber serial no. 334 was replaced with Usp Type 30 snubber serial no. 46184951002 to suppori surveillance testing.

8. Teat Conducted: Hydrostatic D PneumatlcO Nominal Operating pressureD Exempt[!]

Other 0 Pressure psi Teat Temp. _ _ _ _ _ OF

9. Remarks _S~ee~/~tem~~7__________~~~~~__~~~-=~~_~~~~~~~

Applicable Manufacturer's Data Reports to be attached _________________ CERTIFICATE OF COMPUANCE I certify that the stataments made In the report sr. correct snd thst this conforms to the requirements of the ASME Cod., Section XI. Type Code Symbol Stamp /IVA _!~IIf'OC _ _ _ _ _-.;.Nh.;.;I4;..;...._ _ _ _ _ Expiration Date NlA ~~~S-I-gn-e-d------~~~~~~~~~~----n-m-~---n-t---~--m-----~-l-I_~_t_(_()________________________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the Natlonsl Board of Boller and Pressure V....I Inspectors and tha smte or Province of Georgia and employed by Hartford Steam Boller Inspection and InsuraC!C8 Co. of Connecticut of ~qJ. Con~t have Inspected the compon.nts described In this Owner'. Report during the period _...'i8rcV3I!!o{lliOl'JQ9~_ _ _..,...-1 to .".~ -fO: and stat. thst to the beat of my knowledge and belief, the Owner has performed examinations and taken corrective measure. described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate n.lther the Inspector nor his employer makas sny warranty, .xprassed or Implied, concerning the examinations and correct m ras described In this Owner's Report. Furthermor., neither the In8pector nor his employer shall Ie I fo an raonsl Injury or property damage or a loss of any kind arising from or connected with this tiD

     ~~~~~~~~~~;l~~~~--- commlsslons __~~~~~~~~_()~c>~/~~                                                                     __~~~____~_____

Natlonsl Board, Stam, Province and Endoraem.nts Dat. _ _ _ _:;....___--I:...-_ _

FORM NI5-2 OWNER'S RE As Required By "nl~IM A1

                                                                         ~1.W CEMENT ACTIVITY i - J B t t t i o n XI Traveler#-..:'.::.000~'_ _ _ __

1. Owner Southem Nuclear Operating Company Date April 16, 2010 Name 40 Invemess Center Parkway. 8inningham. AL Sheet of 4 Address

2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro. GA 30830 WO 2090006702 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stllmp NlA Name AuthoriZldlon No. NlA Plant VoatIe Expiration Debt NlA Address

4. Identification of System 1208 1 Chemical and Volume Control System

5. <a) Applicable Construction Code ASME S6C. 111, 1974 Edition, Summer 1975 Addenda, NlA Code Case (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _...tI200ili!K.l~emd"".fi2003~l..!a!!ld!!ld!<-._ _ -......;..;;.;..;.-

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corracted, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vesor No) 1208 PIPING PULLMAN POWER NlA NlA 2K4-1208"()()5-02 1989 INSTALLED YES SYSTEM PRODUCTS

7. Description of Work A flow orifice 2-F0-0200 was Installed. Installation required welding the flow orifice to a new section of 3" piping and flow orificelplpe was welded to the existing pieing system. Instaflation of the orifice/piPe was In accordsnce DCP 2090006701.

8. Test Conducted: Hydrostatic 0 pneumaticD Nominal Operating PressureOO exempt 0 Other 0 Pressure psi Test Temp. _ _ _ _ _ oF

9. Remarks ~s~ee~n~em~~7 _____________~~~~~__~__~~__~______~__~~~_________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report ara correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA I NlA Expiration Data NlA ~}'\\o Signed rintendent Data

->..t'                                                              CERTIACATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Preesura Vessel Inspectors and ttle state or Province of                 GEIO!J1iB       and employed by        Hartford Steam Boller InsDeCtion and Insurance Co. of Connectfcut of ~'!i::f-mtiC~t have Inspected the componenta described In this Owner's Report during the period                                                      2I111Q to       ? ;;                    and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures descrIbed In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.

By signing thl iflcata neither the Inspector nor his employer mak.. any warranty, expressed or Implied, concerning the examinations and corr measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall ble I or y peraonal Injury or property damage or a loss of any kind arising from or connected with this l\;:-:t;::::.::....JL.:~_+~~r.....J!:.....::...:..!.:~_ _ r's Signature Commissions _=_a-:-=-*=--.:....;-::Oc::-:'-=I:..Jf-5-:--_~:--;-__-:--__ National Board, State, Province and Endorsements d-f,,--,--..-'_t_o_ _ 4-'----1o" Deta __

" ..- _.- . . CONSOLIDATED POWER SUPPLY 3556 Mary Taylor Road Birmingham. Alabama 35235 Phone (205) 655*5515 Fax (205) 655-5511 CERTIFICATION CUSTOMER: DATE: 9/02/2005 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7068106 7821 RIVER ROAD PO# SALES ORDER: 6554471 o 900 - 1 WAYNESBORO GA 30830 ITEM # QUANTITY UM MATERIALDESCRIPTION HEAT CODE

       ---------------------------------------------------------- ----------- -------

1 11.0 FT 3" S/160 SA312 TP304 SMLS SCHOELLER PIPE BLECKMANN COMMODITY# 0000000066864V HT. 523640. LOT # 158334 CUT CODE: C3QE

       -   -----------------------------------~-----------------               ---------------------

ASME SECTION II AND III CLASS 2 NC t 1989 EDITION NO ADDENDA

     )NO IMPACT TESTING PERFORMED NO NONDESTRUCTIVE     EXAMI~ATION   PERFORMED NO REPAIR WELDING PERFORMED 10CFR21 REQUIREMENTS/10CFRSO APPENDIX B AS APPLICABLE CPS Q.A. PROGRAM 5TH EDITION REVISION 2 DATED 10/6/04 THE ABOVE MATERIAL WAS SUPPLIED IN ACCORDANCE WITH THE ABOVE REFERENCED QUALITY PROGRAM AND QUALITY SYSTEM CERTIFICATE #515, EXPIRATION DATE 12/12/07, WHICH IS IN COMPLIANCE WITH THE CURRENT EDITION AND ADDENDA OF NCA-3800 AND WA-3.800.

BASED UPON REVIEW OF THE ATTACHED DOCUMENTATION/TEST REPORTS, THIS CERTIFICATION AFFIRMS THAT THE CONTENTS ARE CORRECT AND ACCURATE, AND THAT ALL TEST RESULTS AND OPERATIONS PERFORMED BY CONSOLIDATED POWER SUPPLY OR ITS SUBCONTRACTORS ARE IN COMPLIANCE WITH THE MATERIAL SPECIFICATION(S) AND THE SPECIFIC APPLICABLE MATERIAL REQUIREMENTS OF SECTION III OF THE ASME B&PV CODE INCLUDING THE REQUIREMENTS OF YOUR REFERENCED PURCHASE ORDER, UNLESS I PAGE: 1 A OMS/ON OF CONSOLIDATED PIPE & SUPPLY COMPANY. INC.. BIRMINGHAM. AL

..

1 CONSOLIDATED POWER SUPPLY 3556 Mary Taylor Road Birmingham. Alabama 35235 Phone (205) 655-5515 Fax (205) 655*5511 CUSTOMER: DATE: 9/02/2005 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7068106 7821 RIVER ROAD PO# SALES ORDER: 6554471 o 900 - 1 WAYNESBORO GA 39830

 --------------~    ---------- ----------------------- ----------------                   -   -------

OTHERWISE NOTED. THE RECORDING OF FALSE, FICTITIOUS, OR FRAUDULENT STATEMENTS OR ENTRIES ON THIS DOCUMENT MAY BE PUNISHED AS A FELONY UNDER FEDERAL STATUTES, INCLUDING FEDERAL LAW, TITLE 18, CHAPTER 47 THE FOLLOWING ARE ATTACHMENTS TO THIS CPS CERTIFICATION DOCUMENT: 3 PAGES, CMTRS 1 PAGE, LAB REPORT 1 PAGE, HYDROSTATIC TEST REPORT )

~.

ATTESTED BY: ~. TITLE, QA REPRESE TIVE ~ /' PAGE: 2 A DIVISION OF CONSOLIDATED PIPE & SUPPLY COMPANY, INC. BIRMINGHAM. AL

p~ ) t'energysteel 3123 JOHN CONLEY DlUVE LAPEBR, MI 48446 PAGE 1 (810) 5]1.4\l9O CERTIFICATE OF CONFORMANCE Ship-to: Bill-to: Georgia Power Company (VGgtle) Georgia Power Company Plallt Alvin W. Vogtle P.O. Box 830961 782.1 River Road Birmingham, AL 35283-0961 Waynesboro, GA 30830 ATfN: Southern Aeeounts Payable YOUR ORDER NUMBER DATE 7()87617 / ' 7128/09 JOB# DESCRIPTION TOTAL GRADE SPEC Tneeability.: 35305 Orifice, No Modifier: Type: Flow. Letdown; Size; 2 SA479 Type 304 Heat# E80152 Hole Size; Matez:ill; CoDlb:lIctioAj NP .1Ii'; Si!e (A564 Type ~O Co&jjt AFt: 0.212". Your Line item 001. ComrnodJty # insert) Mk:#SDI7432 00000oo 104496 V. Request it 9OPZ.5091282:000 I (lkat#i Al9785 Per dwg: ] 090006S01M006. Flow rate ~50PM Code# AFD Pans are Vibe marked with: Man. Logo. material Insert) Iype. codet AFC. Flow direction. Orific~ Dia., and Commodit)'# 104496V per dwg. Note #2. 35306 Orifice. No Modifier: Type.: Flow. Letdown; Size; 4. 5A479 Type 304 Heat# E80IS2 Hole Size; Material; Coll8tnlction; NP text: Size (A564 Type 630 CodeIJ APe 0.267", Your Line item 002. Commodity it insert) Mac# 5017432 ) 00000oo 104497 V. Request #I 9OPZS091282:0002

                           'Per dwg: 1090006501M006. PlOw Rail: 7SOPM (Heatt A19785 Code# AFD Parts are Vibe marked with: Man. Logo. material                                                                    Insert) type, code# AFC, Flow direction. Orifice Di... and Commodity! 104497V per dwg. Note #2.

ATTACHMENTS: .

MFCi: Diversified Machine Components Mill Tt.'It Reports: Outo KumpulCruciblc Specialty Metals MechanicallAnalytical Reports: Srork Testing . Other: Casde Metals Heat Treat: MT Heat Treat Inc.

This ill to certify that the maleriaI furnished Cor )'Our on:ler and described above. haa been reviewed and complies with reljuirements of the applicable material specifications. and meets all requin:menlll of )'OUr purchase order.
P3d:agillJ in accon:lanee with ANSI N"S.2.2 level C
10 cPR PART 21 Applies
10 CPR SO Appendix B applies .
ANSI N4S.2. Applies .

  *    'The Material was supplied in accordance with the rcquiremcnu of ASMB Section Ill. Division 1. Sub-Article NA37001NCA*3800 and complies with the Applicable Requimments. lIS specified. of ASME Section JJI Sub-&ection NC, Closs 2. 1974 Edition. Winter 197.5 Addenda.

ESSC h.., not performed any welding on the maceriaI described above,
To the best of our knowledge. this material durin& the lMIIuCcturiug processes. Ie$tS and inspections bas not come infO direct contact with Mercury or any or its compounds. 001' with any Mert:llry conta1nini devices employillJ a single boundary of c:ontainmem.
The above materiaVs'weJ'C supplied in accon:Iance with our Nuclear Quality Assurance Manual Issue No.3 Revision No.2 Dated 4f2J108 and OUt ASME NPT CertifICate of AUthorizalion No. Nl928 EJtpiJc& 06fl112011.
This CertiflCllte ~fflnnll that contents of the report are correct and a.ccuralC: and that al/lest results and opcmions pert'orrned by Energy &eellt Supply Co. or its subcontracl'on are in compliance with the material specification and the specific applicable material requirelnCnu of the ASMB Code Section. Edition and Addenda referenced above.

Steve SimOllki, Quality Engineer Fi21 Rev.7 Dated 6123/08

                        ;ORM NIS-2 OWNER'S As Required t;:\ nI~ I"1A
                                                                    ~mulfmt:!ectlon XI
                                                                                                                 'PLACEMENT ACTIVITY Traveler.      10002

1. Owner Southern Nuclear Operating Company APRIL 29, 2010 Name 40 Inverness Center Parl<way. Birmingham, AL Sheet of Address

2. Plant Vogtie Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 2090006704 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant Vogile Expiration Date NlA Address

4. Identificetlon of System 12081 Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. 1111974 Edition, Summer 1975 Addenda, _---'NI.;.;;.;;..:4:..-_ Code Case (b) Applicable Edition of Section XI Used for RepairlReplacement Activity 2001 ED. 2003 ADD.

(c) Appllceble Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Hameof Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) 1208 PIPING PULLMAN POWER NlA NlA 2K4-1208-00s-02 1989 INSTALLED YES SYSTEM PRODUCTS

7. Description of Work A flow orifice 2*FO-0201 was installed. Installation requirsd welding the flow Orifice to a new section of :r piping And flow orifice/pipe was welded to the existing system piping. Installation of the orificelpipe was in accordance with DCP 2090006'101.

8. Teet Conducted: Hydrostatic 0 Pneumatlcn Nominal Operating Pressurer&l ExemptD Other 0 Pressura NfJ P psi Test Temp. ______ OF

9. Rema~s -=S~ee~lt~em~7_ _ _ _ _ _ _~~~~~~~~~~-=~~_~~~~~~~

                                                                                  .y'" .5111/,,,                                                ______________

Applicable Manufacturer's Dsta Reports to be attached CERTIFICATE OF COMPUANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA O:::- ~ -------:.NI..::.;:4:...:.-s-up-e-ri-nt-e-nde-n-t- EX::lon Da4i$~ Ii 0 NlA

'\\

{;\ ~ner or Owner's Designee, Title --Jt..L;::::....:..;:.....:=:.-_ _ ~~\ ~::::::::~~~::~~~::~::::~:~:::::::::::::::::::::::::::::::::::::::::~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Veesel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Insoection and Insurance Co. of Connecticut of Ha!:1f.!2rd....,Q2nn~clJ.t have inspected the components described in this OWner's Repon during the period --,2I2I~-,,1Q~ _ _~-,-_1 to ;:::S;;;i..,pW=fQ~ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures deecrlbed in this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this ficate neither the Inspector nor his employer makes any warranty, expreseed or Implied, concerning the ons and correct urea described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall able manner for ersonal injury or property damage or a loss of any kind arising from or connected with this Commissions ----,:-:--.--....;6A::::::-~'-:::-o~=_O___!_(..(..t=<~,.._:_ National Board, State, Province and Endorsements __~_ Date __ ~ ____ ~~~ _____

CONSOLiDATED POWER SUPPLY 3556 Mary Taylor Road Birmingham. Alabama 35235 Phone (205) 655-5515 Fax (205) 655-5511 CERTIFICATION CUSTOMER: DATE: 9/02/2005 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7068106 7821 RIVER ROAD PO# SALES ORDER: 6554471 o 900 - 1 WAYNESBORO GA 30830 ITEM # QUANTITY UM MATERIAL DESCRIPTION HEAT CODE 1 11. 0 FT 3" S/160 SA312 TP304 SMLS SCHOELLER PIPE BLECKMANN COMMODITY# 0000000066864V HT. 523640 LOT # 158334 CUT CODE: C3QE ASME SECTION II AND III CLASS 2 NC, 1989 EDITION NO ADDENDA NO IMPACT TESTING PERFORMED NO NONDESTRUCTIVE EXAMINATION PERFORMED NO REPAIR WELDING PERFORMED 10CFR21 REQUIREMENTS/10CFRSO APPENDIX B AS APPLICABLE CPS Q.A. PROGRAM 5TH EDITION REVISION 2 DATED 10/6/04 THE ABOVE MATERIAL WAS SUPPLIED IN ACCORDANCE WITH THE ABOVE REFERENCED QUALITY PROGRAM AND QUALITY SYSTEM CERTIFICATE #515, EXPIRATION DATE 12/12/07, WHICH IS IN COMPLIANCE WITH THE CURRENT EDITION AND ADDENDA OF NCA-3800 AND WA-3800. BASED UPON REVIEW OF THE ATTACHED DOCUMENTATION/TEST REPORTS, THIS CERTIFICATION AFFIRMS THAT THE CONTENTS ARE CORRECT AND ACCURATE, AND THAT ALL TEST RESULTS AND OPERATIONS PERFORMED BY CONSOLIDATED POWER SUPPLY OR ITS SUBCONTRACTORS ARE IN COMPLIANCE WITH THE MATERIAL SPECIFICATION(S) AND THE SPECIFIC APPLICABLE MATERIAL REQUIREMENTS OF SECTION III OF THE ASME B&PV CODE, INCLUDING THE REQUIREMENTS OF YOUR REFERENCED PURCHASE ORDER, UNLESS PAGE: 1 A DIVISION OF CONSOLIDATED PIPE & SUPPLY COMPANY. INC., BIRMINGHAM. AL

CONSOLIDATED POWER SUPPLY 3556 Mary Taylor Road Birmingham, Alabama 35235 Phone (205) 655-5515 Fax (205) 655-5511 CUSTOMER: DATE: 9/02/2005 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7068106 7821 RIVER ROAD PO# SALES ORDER: 6554471 o 900 1 WAYNESBORO GA 30830 OTHERWISE NOTED. THE RECORDING OF FALSE, FICTITIOUS, OR FRAUDULENT STATEMENTS OR ENTRIES ON THIS DOCUMENT MAY BE PUNISHED AS A FELONY UNDER FEDERAL STATUTES. INCLUDING FEDERAL LAW, TITLE 18, CHAPTER 47 THE FOLLOWING ARE ATTACHMENTS TO THIS CPS CERTIFICATION DOCUMENT: 3 PAGES, CMTRS 1 PAGE, LAB REPORT 1 PAGE, HYDROSTATIC TEST REPORT ATIESTED BY, ~ ~/ TITLE: QA REPRESEN TIVE PAGE: 2 A DIVISION OF CONSOLIDATED PIPE & SUPPLY COMPANY, INC. BIRMINGHAM. AL

                                                        ~ '8nergysteel 3113 JOHN CONLEY DRIVE LAPEl&. MY 41446                                               PAGE 1 (110) !:JI.49!i1O CERTIFICATE OF CONFORMANCE Ship-to:                                                                    BiU*to:

Georgia Power Company (Vogtle) Georgia Power Company Plant Alvin W. VOltle P.O. Box 830961 7821 River Road Binnlngham, AL 35283*0961 Waynesboro, GA 30830 ATTN: Southern Accounts Payable YOUR ORDER NUMBER DATE 7087617 / ' 7128109 lOB# DESCRIPTION TOTAL GRADE SPEC Traceability t: 35305 Orifice, No Modifier: Type: Flow. Letdown; Size; 2 SA479 Type 304 Heat# E80J 52 Hole Size; Mated.l; COA5tAlC:tioAj NP tlllIo'; Sile (A:564 Type cS3Cl Codet ArC 0.212". Your Line item 001. Commodity # insert) Mic#SD17432 0000000104496 V. Request # 9GP25091282:0001 (Heatl A 19785 Per dwg: 1090006501MOO6. Flow rate 450PM Codet AFD Parts are Vibe marked with: Man. Logo. material Insert) type. code##' AFC. Flow direction. Orifice Dia.* and Commodity! 104496V per dwg. Note #2. 35306 Orifice. No Modifier: Type: Flow, Letdown; Size; 4 SA479 Type 304 Reatt ESOIS2 ' Hole Size; Material; Construction; NP text: Size (A564 Type 630 Codet APe , 0.267". Your Line item 002. Commodity'" insert) Micf SDI7432 0000000104497 V. Request # 9GP25091282:0002 (Heat# Al 9785 Per dwg: J09000650IMOO6. Flow Rate 750PM Code# AFD Parts are Vibe marked wi1h: Man. Logo. ITlIIleriaJ Insert) type. code# AFC, Flow direction, Orifice Dia., and CommoditY! 104497V per dws. Note #1.. !

ATTACHMENTS:

MFa: Diversified Machine Components Mill Te.~t Reports: Outo KumpuJCrucible Specialty Metals Mechanical!Analytical Reports: Stork Testing Other: Castle Metals Heat Treat: MT Heat Treat Inc.

This is to certify that the malenal furnished for your order and described above. has been reviewed and oomplies with requiremelJ(s of the applicable material specifications. and 11*1S all requirements of your purcbase order.
Paclcaging in accordance with ANSI N4S.2.2 level e
10 CFR PART Zl Applies
10 CFR SO Appendh'. B applies
ANSI N4S.2 Applies
The Malerial was supplied in accordance with the requirements of ASME Seclion III. Division I. Sub-Article NA31OCYNCA*3800 and complies with the Applicable Requiremenlll. as specified. of ASME Seclion III Sub-section NC, Class 2. 1974 Edition. Winter 1975 Addenda.
ESSe has not perfo!'lllled any welding on the material described above.
To lhe best of our knowledge. this material during the manufat:lurill8 processes. testS and inspections has not come into direct contact with Mercury or any of ill compounds. nor with allY Mercury conlaining device, employing a single boundary or coow[lmenl.
The above material/s'were supplied in accordance with our Nuclear Quality Assurance Manual Issue No.3 Revision No.2 Dated 4/23/08 and our ASME NPI' Certificate of Authorization No. N2928 Expirea 06I2.1n011.
This Certificate actinns that contents of the report m colTeCt and accurate and that all test resufls and operations performed by Energy Steel &.

Supply Co. or ilS subcontractors m in compliance with the material specification IVId the specific applicable material requirements of the ASME Code Section. Edition and Addenda referenced above. Steve Simoski. Quality Engineer FI2l Rev.7 Dated 6123/08

FORM NI8-2 0

                                                 ~"1l1~WAIRIREPLACEMENT y~rOVISlona             Of The ASME Code Section XI ACllVITY T~vmer'~1~~~~ _______

1. Owner Southem Nuclear Operating Company April 9. 2010 Name 40 Invemess Center Parkway, Birmingham. AL Sheet of 4 Address

2. Plant Vogtie Electrfc Gen~ting Plant Unit 2 Name Waynesboro. GA 30830 WO 2090006705 Address RepelrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name AuthoI'IltlItlon No. tvA Plant Vogt/e Expiration Date tvA Address

4. Identification of System 1208 1 Chemical and Volume Control System

6. (a) Applicable Construction Code ASME Sec. III, 1974 Edition, Summer 1975 Addenda, __--:.N/..::.;~;".:...._ Code case (b) Applicable Edition of Section XI Used for RepalrIReplacement ActIvity _.J!200_1s..;edlC!:.'J!!I2~003IC1..iaiUd=dlO.'_ _

(c) Appll~ble Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped CompOnent Manufacturer SerIal No. No. Identification Built Installed (Yea or No) 1208 PIPING PULLMAN POWER NlA NlA 2K4-1208-005-02 1989 INSTALLED YES SYSTEM PRODUCTS

7. Description of Work A flow ortfIce 2-FD-0202 was installed. Installation required welding the flow orlfice to a new section of 3" piping and flow oriftcelpiee was walded to the existing piping systam. Installation of the orifice/pipe was in accordance DCP 2090006701.

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureOO ExemptD Other 0 Pressure psi Test Temp. _________ OF

9. Remaru_S~ee~~"am~~7______________~~~~~__~~~-=~~ __~~~~~~~________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA Certificate 0l~~on

_________..:.N!..::.;i4;.;,..._ _ _ _ _ _ expiration Date NlA

~~\a\16,S-lg-n-ed--<----~~~~~~~~~~~s-u-~-n-nt-eOO

'1 Vl _                            ;orner'.       DesIgnee TItle                    __M_t___D_ate ____     -_~~~~(:~~7~/~{)::::________________~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission leaued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BoUer laspectjon snd Insurance Co. of Connecticut of l'Oat,!J!111lJfl!;.tlcfll. have Inapected the components described In thla Owner's Report during the period 3I1711Q t o = J N Q

and state that to the best of my knowledge and belief, the Owner haa performed examinations and taken corr Iva measurea described In thla Owner's Report In accordance with the requirements of the ASME Code, Section XI.

By signing this certlflcata neither the Inspector nor his employer mskea any warranty, expressed or Implied, concarnlng the

        ¥8~l)imatiOn. and corr            measures described In this Owner's Report. Furthermore, neither the Inspector nor hla employer shall lable I a        manna fo a         personal Injury or property damage or a loss of any kind arlalng from or connected with this
       ~-""::;'-=:=:-::~~L..IC....J~                      __               Commlaalona     ~,..,.....GA~---,..-",-()~Q....::...{I:,-o----.,.~_....,.--_

National Board, State, Provlnca and Endorsements

CONSOLIDATED POWER SUPPLY 3556 Mary Taylor Road Birmingham. Alabama 35235 Phone (205) 655-5515 Fax (205) 655*5511 CERTIFICATION CUSTOMER: DATE: 9/02/2005 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7068106 7821 RIVER ROAD POi SALES ORDER: 6554471 o 900 - 1 WAYNESBORO GA 30830 ITEM # QUANTITY UM MATERIAL DESCRIPTION HEAT CODE 1 11.0 FT 3" S/160 SA312 TP304 SMLS SCHOELLER PIPE BLECKMANN COMMODITY# 0000000066864V HT. 523640 LOT # 158334 CUT CODE: C3QE ASME SECTION II AND III CLASS 2 NC, 1989 EDITION NO ADDENDA NO IMPACT TESTING PERFORMED NO NONDESTRUCTIVE EXAMINATION PERFORMED NO REPAIR WELDING PERFORMED 10CFR21 REQUIREMENTS/IOCFR50 APPENDIX B AS APPLICABLE CPS Q.A. PROGRAM 5TH EDITION REVISION 2 DATED 10/6/04 THE ABOVE MATERIAL WAS SUPPLIED IN ACCORDANCE WITH THE ABOVE REFERENCED QUALITY PROGRAM AND QUALITY SYSTEM CERTIFICATE #515, EXPIRATION DATE 12/12/07, WHICH IS IN COMPLIANCE WITH THE CURRENT EDITION AND ADDENDA OF NCA-3800 AND WA-3800. BASED UPON REVIEW OF THE ATTACHED DOCUMENTATION/TEST REPORTS, THIS CERTIFICATION AFFIRMS THAT THE CONTENTS ARE CORRECT AND ACCURATE, AND THAT ALL TEST RESULTS AND OPERATIONS PERFORMED BY CONSOLIDATED POWER SUPPLY OR ITS SUBCONTRACTORS ARE IN COMPLIANCE WITH THE MATERIAL SPECIFICATION (S) AND THE SPECIFIC APPLICABLE MATERIAL REQUIREMENTS OF SECTION III .oF THE ASME B&PV CODE, INCLUDING THE REQUIREMENTS OF YOUR REFERENCED PURCHASE ORDER, UNLESS PAGE: 1 A DlVfSfON OF CONSOLIDATED PfPE & SUPPLY COMPANY. INC.. BIRMfNGHAM. AL

CONSOLIDATED POWER SUPPLY 3556 Mary Taylor Road Birmingham, Alabama 35235 Phone (205) 655-5515 Fax (205) 655-5511 CUSTOMER: DATE: 9/02/2005 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7068106 7821 RIVER ROAD PO# SALES ORDER: 6554471 o 900 - 1 WAYNESBORO GA 30830 OTHERWISE NOTED. THE RECORDING OF FALSE, FICTITIOUS, OR FRAUDULENT STATEMENTS OR ENTRIES ON THIS DOCUMENT MAY BE PUNISHED AS A FELONY UNDER FEDERAL STATUTES, INCLUDING FEDERAL LAW, TITLE 18, CHAPTER 47 THE FOLLOWING ARE ATTACHMENTS TO THIS CPS CERTIFICATION DOCUMENT: 3 PAGES, CMTRS 1 PAGE, LAB REPORT 1 PAGE, HYDROSTATIC TEST REPORT PAGE: 2 A DIVISION OF CONSOLIDATED PIPE & SUPPLY COMPANY. INC.. BIRMINGHAM, AL

                                                           , 'energysteel 3123 JOHN CONLEY DlUVE LA.PED, MI 41446                                             PAGE 1 (110) 538-4990 CERTIFICATE OF CONFORMANCE Ship-to:                                                                       Bill-to:

Georgia Power Company (Vogtle) Georgja Power Company Plant ARin W. Voatle P.O. Box 830961 7811 River Road Birmingham, AL 35183*0961 Waynesboro, GA 30830 AfiN: Southern ACCOUDtIII Payable YOUR ORDER NUMBER DATE 7087617 ~ 7f.UY09 JOM DBSCRIPTION TOTAL GRADE SPEC Traeeablll!y': 3.530.5 Orifice. No Modifier: Type: Flow. Letdown; Size; 2 SA479 Type 304 Heat# E801 ~2 Hole Size' Material; Cons&ructioaj NP .xl> gil. (A-S64 Type mo COOC# AFC 0.212". Your Line item 001, Commodity # insert) Mic#SD17432 0000000104496 V. Request' 90P2.5091282:0001 (Heat# A1978S Per dwg: 1000006SOlMOO6. Plow rale ,..SOPM Codc# AFD Pans are Vibe marked with: Man. Logo, material Insert) type. codell APe, Flow direction. Orifice Dis., and Commodity! I04496V per dwg. Note 1f2. 3.5306 Orifice. No Modifier: Type: Flow. Letdown; Size; 4 SA479 Type 304 Hcatt ESOI.52 Hole Size; Material; Conatructinnj NP text: Size (A564 Type 630 Cadell APe 0.267". Your Line item 002. Commodity' insert) Mict SD 17432 0000000104497 V. RequtR # 9GP2.5091282:0002 (Heat## Al978S

                     -Per dwg: 109000650 lM006. PlOw Rate 750PM                                                                      Code# AFD Parts are Vibe marked with: Man. Logo, material                                                                     Insert) type. code# AFC. Flow direction, Orifice Dia., and Commodity! 104497V pc;r dwg. Note 112.

ATIACHMENTS:

MFCi: Diversified Machine Components Mill Test Reports: Cuto KumpulCrociblc Specialty Metals MechaniCllllAnalytical Reports: Stork Testing Other: Castle Metals Heal "f'Rat: NT Heat Treat Inc.

This Is to certify lhat the male:rial furnished lOr your order and described above, has been reviewed and complies wilh requirements or the applicaI)Ie material specificatlona, and I'I1I:ets all requirements of your purehase order.
Paclcqlng in accordance with ANSI N4S.2.2 level C
10 CPR PART 21 Applies
10 CPR SO Appendix B applies
ANSI N4S.2 Applies
The Material was supplied in accordance witllthe rcquiremcnls or ASME Seclion III, Division I, Sub-Article NA370!l'NCA-3800 and complies with the Applicable Requirements. as specified. of ASME Section UI SuiHeclion NC. Closs 2. 1974 Edition, Winter 197.5 Addenda.
ESSC has not performed any welding on the materia1 described above. ,
To the best of our knowledge, this material during the manuCacturiug pruc.:c:ucs. tests and i!t$peCtions bas not come inln direct contact wilh Mercury or any of its compounds. nor with Illy Mercury containing devices employing II. single boundary of containment.
The above ma.tcrialls*weJ'C suppUed in accordance with our Nuclear Quality Assurance Manual Issue No.3 Revision No.2 Dated 4f.231OS and our ASMB N'F'T CertifICate: of AUlhori7.ation No. N292t1 Expires O6Illnoll.
This CertirlCate affnms that contents of the ~rt IIle correct and accurate .and !hilt a111c:st rcsullS and openll.ions performed by Energy Steel .t Supply Co. or its subcontractors are in compliance with the material specification and the specific applicable material requircmenl4 of the ASME Code Section, Edition and Addenda referenced above.

ENERGY mEL .t SUPPLY CO.

                                                                                            ~ ~ 1(81/0, Steve Simoski. Quality Engineer FI21 Rev.7 Dated 6/23/08

FORM NIS-2 OWNER'S RE ACEMENT ACTIVITY As Required By T Traveler # 10018

                                                                                                                                                                                                  --'-~.::..-----

1. Oll'1er Southem Nuclear Operating Company Date April 7, 2010 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of 3 Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 WO 2072032804 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Wu-k Performed by _ _;;.;M",a""in:.:;te::.;,n::;:a":-,n.;;;ce;;...::;D..:,eea=rt,;;,m",,e:.;,n,;,:,t__ Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Expiration Date NlA Address ----------------~~----------

4. Idll!ltlflcatlon of System 1205 I Residual Heat Removal System

5. (a)~pllcable Construction Code ASME Sec. III. 1974 Edition, Sum 1975 Addenda, _--..,;N:.,::V,;.:.:4:..-_ Code Case (b)"Pplicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c)~plicabla Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Vear Removed, or Stamped Compo.,.nt Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE KEROTEST ABR1-10 NIA 2-1205-U4-011 1983 REMOVED YES VALVE' FLOWSERVE 24BHY NlA 2-1205-U4-Q11 SEE INSTALLED YES REMARKS

7. Description of Work Valve sin ABR1-10 was removed. Valve sin 24BHY was installed.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating Pressure[!] ExemptD Other 0 Preasure NOP psi Test Temp. ______ OF

9. Remarks See Item 7, year built was not on NPV-1 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.

Type Code Symbol Stamp NlA

                                                /r'--_ _ _ _ _Nl.;.;;.;..:4"--_ _ _ _ _ Expiration Date                                                                                         NIA

,~~ Signed Date W( 2.. It 0 ~ \" ~IO I...--_ _..;::.;.::;:::...::..;::.::.:.:.::;;..::.:;.::.::::a:.:::::~------------_----' CERTIFICATE OF INSERVICE INSPECTION I, ltIe undersigned. holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connl!!CliCyt of f::JJAJ:Jt,ord,..c.on!J~cut have Inspected the components described in this Owner's Report during the period QI@lQ9 to.. & I 8dD , and state that to the best of my knowledge and belief, the Owner has performed e-x-a....m<<:l:-<'n""atl~o"-n-s-a-n-:d-ta-ke-n-1 corrective v measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By Signing this rtlfI neither the Inspector nor his employer makes any warranty, expressed or Implied, concarning the am ations and cor tI ures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall Uab y personal Injury or erty damage or a IOS8 of any kind arising from or connected with this pectlo Inspector's Signature Commissions _-;;:-~::7Git:;::;:-':"':':;7.:-:-=O:::::::--D__;_ll~{5_-=-="-7'__--:-___ National Board, Stste, Province and Endorsements

    }        Date_~-=--_-~/=-8_-,L-to         __

FORM NPV-' CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVE~* As Required by the Provisions of the ASME Code, Section III, Division 1 2 Pg.1of_

    ,. !'IJIllWlufectured and certified by        Rowserve Corporation 1900 South Saunders St. Ralelah NC 27603 IMm" III\d add.... of N Ctnlllcot. Hoiderl

2. !'lJllllufactured for Georgia PI:7Ner Comj'lilny, Southern Nudear Operating Comoanv Inc. PO Box 1295 Birminoham AL ~5201 1_. II'Id odd,*** 01 Putche...,

3. L<<ltion of installation

4. 1VI0I1a1 No., Series No .. or Type 1500 Drawing 06-41634-01 Rev. _____0 ~_____ CRN NlA

5. A.SNE Code, Section III, Division 1:

1986 No Addenda 2 N/A

                                                                    'odIU"'"                      I.dd._ dote!                             leI...,

6. F'Uf'lIP or valve _Va:.;;;;c..Ive:..:::-___ Nominel inlet size 2 Outlet size 2 lin.! 111'.1 7, Material:

(a) valve Body SA351-a=BM Bonnet __N",,/<..;.A.;....._ Disk AM5-S387 Bolting _ ...N .../"'A'---_ {bl pump Ca'ing _ _ __ Cover Boltino _ _ __ la' CArt. fbI Narl (el BodV/Caslng Id, SonnatlCo\fe(' (., Disk Holder', Boltrd Sen. I Serill Serial Serial No. No. No. No. No. 24BHY NlA N601D-l NGOID-2 N/A N/A

                                                                                                                                                      ====~6:2:79-:::1======

6279-2 ) 25BHY NlA N601D-3 N/A 6279-3 26BHV N/A 27BHY N/A N6010-4 NlA 6279-4

Supplemental Informalion In !he form of l!tu**k..

is incluclad on each st..,.I, (3) eac::h ihlle! tc".... or drawinga - V be Uled provided I1l .ize is 8~ x 11. f21 information in lrom. 1 Ihlou,," 4 on this 0.111 Report Is numbered and !he number of sh.,.ts 111 reeorded at !he lop of this 101'1'1"<.

. {JA-5 c::- .3 er 3 2 FORM NPV-1 (Back - Pg. 2 of _ _I 24BHY thru 27BHY Certificate Holder's Serial No. S. Design conditions .p_., 2184 psi 680 Cl<lrtlporolUttl Of' or valve prenure class 1500

9. Cold working pressure 3600 psi at 1000f' 5100 3960

, O. Hydrostatic test psi. Disk differ~tial tast pressure psi

11. Remarks: Sal~ Order 41634 camFICAOON OF DESIGN A. Nguyen AI. 15301 Design Specification certified ~. P.E. State Reg no.

Design Report certified by *5~t'- ilA../ ViY'11" (J I"rl ntftl-"" /)""",.

                                                                                                       .
                                                                                                    ./"1              P.E. State          AII'          Reg no*        AltI:.

CERTIFICATE OF COMPLIANCE We certify that the statements made in this raport are correct and that tnis pump or valve conforms to the rules for c natruction of the ASME Code, Section III, Division ,. N Certificate of Authorization No. N-1S62 Expires 11-26-09 Date 1-26-0"7 Nama Aawserve CorporiJtion IN Contflelnt "oIar, Signed~ ~~ C..._I.od ,,,,,,**ont y.1 CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by tha National Board of Boilet and Pressure Vessel Inspectors and th State or Province of NC end employed by HS8 CT of Hartfonfr cr nave inspected the pump, or valve, described in t is Datil Report on

        'L.2k/o 2                   , lind state that to the best of my knowledge and belief, the Certificate Holder has constructed t                        is pump, or valve, in accordance with the ASME Code, Section III, Division 1.

ay signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the co flponent described in this Data Report. furthllfmore, neither the inspector nor his employer shall be liable in any manner for any personal injury 0 property damaoe or a loss of any ~ind_ ~i,Slng from or connected with this i n a Date "p (,. I.', Signed .4~--ffl. ,~

                                           /      !Au_'rod Hud.., Inspector)

Commissions Iolc!'/Y2J [1'1111'1. Bel, UncI. ...oo...... on..1 and .,.1 otIltOll,ondno.) Vdatfe CO~"I'I\.t'\(: De'5I'gll... t<ef,,...--t ce:--'t;f.('d;~AJ lid~ ,et'Jv. (N/ , f''- Nc;4 -$5'51' ~ If/Jd...*S, ;-P /JSHe .:$tJ(htfA/7li,

                                        -I'dr- ¢Ia~.s ~ "Aiv~.s ~J. c1e-s;fJlI*e:1 -1iJ
                                        .5er vire ~:"J"
                                                                ~a.M' (,/~9Iao"                                                                                     :2.. ""
                                                                                                                                                                           ,
                                                    ----

- FORM NIS-2 OWNE t;' n 111IIIIHiI. . . . .RlREPLACEMENT ACTIVITY As Req"-'Atr.lloI. .:>fI.1 Traveler. 10027

1. Owner Southern Nucfear Operating Company Date April22, 2010 Name 40 Inverness Center Parl<way, Birmingham. AL Sheet of Address

2. Plant Vogtle Electric GeneratIng Plant Unit 2 Name Waynesboro, GA 30830 2081944902 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Def!!!.rtment Type Code Symbol Stamp NlA Nsme Authorization No. NlA Plant V0at/8 Explmlon DIrt. NlA Addresa

4. Identification of System 1208/ Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. 1111974 Edition, Summer 1975 Addenda, _---:NI.:..:;,:..I4:-_ Code Case (b) Applicable Edition of Section XI Uaed for RepalrlReplacement ActIvity 2001 ED. 2003 ADD.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vesor Nol PIPE PULLMAN POWER /iliA /iliA 2K3-1208-123-03 1989 REPLACEMENT YES SUPPORT PRODUCTS

7. Description of Work A 1" branch weld connection was attached to 4" line 2-1208-L4-123 per Moe 2081944901..

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Oparatlng PressureD Exempt[!]

Oth~r D Pressure pal Teat Temp. _ _ _ _ _ OF

9. Remarb~S=99~/~~~m~7______________~~~~~__~~~~~~__~~~__~~~___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, SectIon XI. Type Code S'LbOI Stamp /iliA Certlflcate!l ~.... . wf. * /iliA Expiration Date . /iliA Signed p[ AI"¥ '2. Superintendent Data //spj(O Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersIgned, holding a valid commission Issued by the Nationel Board of Boiler and Pressure Vesaellnapectors and the state or Province of GeoCQia and employed by Hartforcl Steam Boiler 10SDeCtf0n and Insurance Co. of Connectfcut of .!:l!!Jforr;LConnecticut have Inspected the components described In this Owner's Report during the period _ _ 3I2I~1ucQ'--_ _,___,_-1 to ;;::J-.:;,g:.ZO ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this ficate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the nations and cor v me ures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall laB In fo y personal Injury or property damage or a loss of any kind arising from or connected with this

  ...:::I....=""""~¥=--_1'.J-,--=-z-_#_....;;.----                      Commissions G71                    0       6     11.:5
                                                                                       --:::Nat-;--::;I~o-na-:I~B::-oa-rd":',-:;S;::'ta~te:--,P=r-o"'vl':-n':"ce-a-n-:d-:::E::-n-:d~o-rse-m-e-n-:-ts----

O8te _______-'-_____

FORM NIS-2 OWNER'S REPORT FOR As Required By The Provisions Of The REP(\nlGl~lA.LIVITY

                                                                                                 ~             e      fftnt    Traveler#--,-1.::.00::.:3::.:;0~ _ _ __

1. Owner Southern Nuclear Operating Company Date March 31, 2010 Name 40 Inverness Center Parkway. Birmingham, AL Address Sheet 0'

2. Plant Vogt/e Electric Generating Plant Unit A Name Waynesboro, GA 30830 WOA100476201 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Wy/e Laboratories Type Coda Symbol Stamp NlA Name Authorization No. NlA 7800 HWY 20 West, Huntsville AL 35807 Expiration Date _ _ _ _ _ _ _ _ _ _ _ _N/,;;;.~~ _ _ _ _ __

Address

4. Identification of System 2117 I Production Warehouse

5. (a) Applicable Construction Code ASME Sec. III, 19n Edition. Summer 1979 Addenda. _ _;...;NI.",}1",--_ Code Case (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity 2001 ad. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name Component 0' Name of Manufacturer Manufacturer Serial No.

Board No. Other Identification Year Built Removed, or Installed Stamped (Yes or No) VALVE TARGET ROCK 125 NlA A*2117*PARTSQ 1983 CORRECTED YES

7. Description of Work Valve was sent to Wyle Labs for testing and inspection, disc was replacement. bonnet to body was seal welded.

8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt~

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~s~ee~n~em~7_ _ _ _~ ____~~~~~_~_~-=_~ ___ ____ _____________

                                                                                                                 ~           ~

Applicable Manufacturer's Deta Reports to be attached CERTIFICATE OF COMPL.IANCE I cart/fy that the statements made in the report are correct and thst this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA

                                              --'-_ _ _ _ _..:.N.;;.V,.:...;:4~_ _ _ _ _ Explration Date                                   NlA

\~ Signed Date 4ft? It 0 If' \\0 L....-_ _......:.:;.:.:.::..;~~...:;.;;:;:::.~..:.:=_ _ _ _ _ _ _ _ _ _ _ _ _ _ _----I

;}13\\

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission iSSUed by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Josurance Co. of ConnectiCut of HartfOrd:j;O!ecticut have Inspected the components described in this Owner's Report during the period _ ...31"'-f'17,,,,,'/,,-:10"-_~~""'-_1

                  ....

to ~;S"' ~-~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this Iflcate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the IA~~_""'atlon8 and correctl mea res described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall liable i a y manner f rsonal injury or property damage or a loss of any kind arising from or connected with this ct/o

        '>OM--=-""~~Inspector

_ _-+l-"""';;~ _ _ _---==-_ Commissions _-:-:-:~G+r.::::::-=--,-:-=:."()c>-:---===-/_j.E:-:--_-:-:::---:- __-:-___ Signature National Board, State, Province and Endorsements Date .......s--.S-1'0

  . ~----

AliMiiRllMCl"':I'jT ACTIVITY Travelert......;'~OO=S.:..' _ _ _ __

1. Owner Southem Nuclear Operating Company Date March 31, 2010 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vagtle Electric Generating Plant Unit A Name Waynesboro, GA 30830 WO A 100476201 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Wyle Laboratories Type Code Symbol Stamp NlA Name Authorlmlon No. NlA 7800 HWY 20 West, Huntsville AL 35807 Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ Nl._:11_ _ _ _ _ __

Address

4. Identification of System 2117 I Production Warehouse

5. (a) APpliceble Construction Code ASME Sec. III, 1977 Edition, Summer 1979 Addenda, _ _ _ __ Code Case (b) APpliceble Edition of Section XI Used for Repair/Replacement Activity 2001 td. 2003 add.

(c) APplicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed,or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE TARGET ROCK 197 NlA A2117PARTSQ SEE CORRECTED YES REMARKS

7. Description of Work Valve was open and inspected, no parts replaced. Valve bonnet to body was seal welded.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exemptfg]

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks See Item 7: year built was not on NPV-1 Applicable Manufacturer's Data Reporta to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.

Type Code Symbol Stamp NlA _ _ _ _ _ _:..:NI.:..:,i\.:..-_ _ _ _ _ Expiration Date NlA i1~O Signed rfntendent Date 4'\ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commieslon Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georaia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of !::fJH1!p~cut have Inspected the components described In this Owner's Report during the period _-'3/"'-;'-'!..!.71-":'0"'-_--::--:--_1 to L-:S=-~"""~ ,and state that to the bast of my knowledge and belief, the Owner has performed examinations and takan correctlv. measures described In this Owner's Report In accordence with the requirements of the ASME Code, Section XI. By Signing this certiflcata neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and cor iva aasures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall b la e In ny man e fo ny personal injury or property damage or a loss of any kind arising from or connected with this I ectl Commissions ---:"......,.--,.64-=---,-=o_u-=-,...,.I_--5_-=-=-.,..-_____ National Board, State, Province and Endorsements Oat. _ _ _ _ _ _ _:....._ _ __

FORM NIS-2 OWNER'S REII:)FftiltllilliflttMF8'lA.CEIMEI~T ACTIVITY 10032

1. Owner Southem Nuclear Operating Ccmpany Date Aprl120, 2010*

Name 40 Inverness Center Parkway. Birmingham, AL Sheet 1 of 1 Addr...

2. Plant Vogtie Electric Generating Plant Unit 2 Name waynesboro. GA 30830 2090304801 Addrass Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp tvA Name Authorbatlon No. tvA Plant VOgJJe Expiration Date tvA Addrass

4. Identification of System 12011 Reactor Coolant System

5. <a} Applicable Construction Code ASME Sec. III 1911 Edition, Summer 1972 Addenda, NlA Code Case (b) Applicable Edition of SectIon XI Used for RepalrIReplacament ActIvity 2001 ed. 2003 acid. ----'";;.;..;.-

(c) Applicable Section XI Code Case(s)

8. Identification Of Componente National Corracted, ASMECode Hameof Name of Manufacturer Board Other Yeer Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Inatelled (Yes or No}

STUD ENERGY STEEL & NPT32fJ66.14, NlA 2* 1201-B6-003 2006 INSTALLED YES SUPPLY CO. HT.835472 NUT VITCO NUCLEAR AVA-2 NlA 2-1201-86-003 1988 INSTALLED YES PRODUCTS

1. DescrIption of Work Replaced stud and nut at position #9 on the hot leg primal}' manway.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating pressureD Exempt I!]

Other 0 Pressure pel Test Temp. _ _ _ _ _ "F

9. Remarlal _See=::..I:.:;te:;.;.m;.;..:...7_ _ _ _ _ _ _-:---::,...-:-:--::-_-:---:---:--:-:--::-_-:--:--:---:-:--::--:--_ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are corract and that this conforms to the requirements of the ASME Code, Sactlon XI. Type Code Symbol Stamp NlA _ _ _ _ _ _N/,:..=..:.:'1:...-_ _ _ _ _ Expiration Date NlA ~~,~S-'g-n-~------~~~~~~~~~ --M-tM--~-nt----Dm-e-----i,--/~-_'_1_1_0___________________ __ CERTIFICATE OF INSERVICE INSPECTION I, the underslgn~, holding a valid commission Issu~ by the Nmlonal Board of Boller and Prassure Vessel Inspectors and the ateta or Province of GeQn;!a and employed by Hartford Steam Boiler Insoection and InsurancEI Co. of Connectic!Jt of ~ connect~t have inspected the components described In thle Owner's Report during the period 3I8OO1Q t o /... & and mate that to the best of my knowlqe and belief, the Owner has parform~ examinations and taken corrective meesures deacrlbed In this Owner's Report In accordance with the raqulrements of the ASME Code, SectIon XI. By Signing this cartificate neither the Inspector nor his employer makea any warranty, expressed or Implied, concerning the exam ons and cor uraa descrl~ in this Owner's Report. Furthermore, neither the Inspector nor his employer shall able n a manna f a y parsonal Injury or property damage or a los8 of any kind arising from or connect~ with this

   -=~:::::::oo.L\_~~......I.:___"",...-------                                   Commissions  _::-:-::'::---6t\":"':"_:-=.~O:--:o~/':"t-'S-_:_:::--:----:---_

National Board, State, Province and Endorsements

FORM NI5-2 OWNE~III1tj .... --.-.EPLACEMENT ACTIVITY As Required By The Prov sions Of The ASME Code Section XI Traveler # 10033

1. Owner Southern Nuclear Operating Company Date April 16, 2010 Name 40 Invemess Center Parlcway. Birmingham, AL Sheet of 2 Addr...

2. Plant Vog1/e Electric Generating Plsnt Unit 2 Name Waynesboro, GA 30830 2100547902 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance DelJattment Type Code Symbol Stamp NlA Name Authorlz.uon No. NlA Plant Vogtie Expiration Date NlA Address

4. Identification of System 12081 Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. III, 1977 Edition, Summer 1975 Addenda, _.....;..NI.,;;.;:A-,--_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacament Activity 2001 ed. 2003 add.

(0) Appllceble Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vesor No)

HALF CONSOLIDATED 7550 NlA 2-1208-PIPE 1989 INSTALLED YES COUPLING POWER SUPPL Y

7. Oescrlptlon of Work A 1'ventline assembly was attached to 6" LINE 2- 1208-L4-411 (spool 411-S-13)

8. Test Conducted: Hydrostatic D PneumatioD Nominal Operating PressureD Exempt[!j Other D Pressure psi Test Temp. _ _ _ _ _ OF

9. Remaru~Se~e~ffem~~7_ _ _ _ _ _ _~~~~~__~~~-=~~ __~~~~~~~____________

Applicable Manufacturer's Oats Reports to be attached CERTIFICATE OF COMPLIANCE I cartlfy that the atstementa made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA NlA Team Leader Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georoia and employed by Boi n u 0 on of H..ggtotrJ... CQq!JJtp.tlc/JJ. have Inspected the components described In this Owner's Report during the period - _ 10 to 'i';"3Zl¥:and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordanca with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concarnlng the examinations and cor[ va measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall

  ....",,,._e I      ny ma er fo any personal Injury or property damage or a loss of any kind arising from or connected with this
    ----:.---:'--t--:--:::-:-'-~-----

r'. Signature Commissions --:~---:G:4-::---.,.-",..,....,.l)_--="b_{...,..f_'5_~--:-_---:- National Board, State, Province and Endorsements ___ \, Date 4-;t2--ID

P 0:1 'L. '2... "I L ~--------------~

                     ~\U:R~-tltQ                                                               7/i)

CONSOLIDATED ,;). ,~~ POWER SUPPLY c!Y 3556 Mary Taylor Road NUCLEAR CERTIFIED PRODUCTS Birmingham, Alabama 35235 Phone (205) 655-5515 Fax (205) 655-5511 CERTIFICATION CUSTOMER: DATE: 5/14/2009 GEORGIA POWER CO (VOGTLE) PLANT ALVIN W VOGTLE CUSTOMER P. 0.. #: 7087766 ...- 7821 RIVER ROAD 651661 SALES ORDER: 6592418 o o - 1 WAYNESBORO GA 30830 ITEM # QUANTITY OM MATERIAL DESCRIPTION HEAT CODE 001 2.0 EA 1 3M SW H-CPLG SA182 F304L LOT- 7550 MFG- BONNEY COMMODITY# 0000000035751V FORGE ITEM 001 ASME SECTION II & SECTION III SUBSECTION NC CLASS 2 1995 EDITION 1996 ADDENDA NO IMPACT TESTING PERFORMED NO NONDESTRUCTIVE EXAMINATION PERFORMED NO REPAIR WELDING PERFORMED 10CFR21 REQUIREMENTS / 10CFR50 APPENDIX B AS APPLICABLE CPS Q.A. MANUAL 5TH EDITION, REVISION 3 DATED 10/17/07 THE ABOVE MATERIAL WAS SUPPLIED IN ACCORDANCE WITH THE ABOVE-REFERENCED QUALITY PROGRAM AND QUALITY SYSTEM CERTIFICATE QSC-51S (EXPIRATION DATE 12/12/2010) WHICH ARE IN COMPLIANCE WITH THE CURRENT EDITION AND ADDENDA OF NCA-3800 AND WA-3800. BASED UPON REVIEW OF THE ATTACHED DOCUMENTATION/TEST REPORTS, THIS CERTIFICATION AFFIRMS THAT THE CONTENTS ARE CORRECT AND ACCURATE, AND THAT ALL TEST RESULTS AND OPERATIONS PERFORMED BY CONSOLIDATED POWER SUPPLY OR ITS SUBCONTRACTORS ARE IN COMPLIANCE WITH THE MATERIAL SPECIFICATION(S) AND THE SPECIFIC APPLICABLE MATERIAL REQUIREMENTS OF SECTION III OF THE ASME B&PV CODE, INCLUDING THE REQUIREMENTS OF YOUR REFERENCED PURCHASE ORDER UNLESS OTHERWISE NOTED PAGE: 1 A DIVISION OF CONSOLIDATED PIPE & SUPPLY COMPANY. INC., BIRMINGHAM. AL

Travelert 10034

1. Owner Southern Nuclear Operating Company Date ApI1I22, 2010 Name 40 Invemess Center Parlcway, Birmingham, AL Sheet of Addreas

2. Plant Vogtfe Electric Generatlng Plant Unit 2 Name Waynesboro, GA 308:30 2100547905 Address RepelrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance DeF!!!.rtment Type Code Symbol Stamp NlA Name AuthorIzation No. NlA Plant Vogt/e Expiration Data NlA Address

4. Identification of System 1204 I Safety Injection System

5. (a) Applicable Construction Code ASME Sec. 1111974 Edition, Summer 1975 Addenda, _ _:..;:N/.;,;.:4.:....-_ Code Case (b) Applicable Edition of SectIon XI Used for Repalr/Replacament Activity 2001 ED. 2003 ADD.

(c) Applicable Section XI Code Case(s)

8. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Yasr Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Vas or No)

PIPE PULLMAN POWER NlA NIA 2K3-1204-o11-o1 1989 REPLACEMENT YES SUPPORT PRODUCTS

7. Oescrlptlon of Work A 1° branch weld connection was attached to eo line 2-1204-'-4-011 per MDC 2100547901.

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[!j Other D Preasure psi Test Temp. _______ OF

9. Remarks _S~e~e~/m~m~7_________~~~~~_~~~-=~~_~~~~~~~

Applicable Manufacturer's Data Reports to be attached ______________ CERTIFICATE OF COMPUANCE I certify that the statemenls made In the report are correct and that this conforms to the requirements of the ASME Coda, Section XI. Type Coda Symbol Stamp NlA Certificate ~"~ _____:..;:N/.;,;.:4.:....-_ _ _ _ _ expiration Date NlA ~fJxfJ Signed ~~ Superintendent Date t/:;oU 0 U~~ ~__________O~w~nfi~o~r~OW~n~er~'s~Des~lg~ln~ee~T_lt~le~__________________-__:.~_~:.:._:.~:.-__:._:._:._:__________________~ CERTIFICATE OF INSERVICE INSPECnON I, the undersigned, holding a valid commission Issued by the National Board of Bollar and Preasure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartfo~ have Inspected the components described In this Owner's Report during the period _ _ ,vu1,.!,!61u1.l.!Q_ _ _ _ _ 1 to fj;1Iojioii;;;lJnd state that to the best of my knowledge and belief, the Owner has performed examinations and taken correctlva measures described In this Owner's Report In accordance with the requirements at tha ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, exprassed or Implied, concerning the examinations and corrective measures dascribed In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner tor any personal Injury or property damage or a loss of any kind ariSing from or connected with this

      ~In~~                                                             Commlsslona    ~tlo?!i!.rd,        State, Province and Endorsements

-- FORM NI5-2 OWNER'S REPORT FOR REPQRlGlNALvlTY As Required By The Provlslone Of The ASME Coda Section XI Traveler.-..:.1.=.0035=:...-_ _ __

1. OWner Southem Nuclear Operating Company Date March 24. 2010 Name 40 Invemess Center Parkway' Birminghem. AL Sheet of Addr...

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro. GA 30830 WO 2090304601 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Westinghouse Electric Co. Type Code Symbol Stamp NlA Name Authorizallon No. NlA 44 Inverness Center Parkway. Suite 148. Expiration Dat. NlA Birmingham. AL 35342 Address

4. Identification of System 1201 / Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. III, 1971 Edition, Summer 1972 Addenda, _-,-1~;..;;;...;..;;2,,--_ Code Case (b) Applicable Edition of SectIon XI Ussd for RapalrlReplacament ActIvity med. 2003 add.

(c) Applicable SectIon XI Code Casa(s)

6. Identification Of Components National Corrected, ASMECoda Name of Name of Manufacture, Board Other Ves, Removed, or Stsmped Component Manufacturer Serial No. No. Identification Built Instslled (Vee or No)

STEAM WESTINGHOUSE 1983 35 2- 1201-fJ(H)()2 1983 INSTALLED YES GENERATOR

7. Description of Work Installed mechenlcal plugs in tube sheet on hot leg side. locations row 40- column 58 and row 52- column 73 Installed mechanical plugs in tube sheet on cold leg side. locations row 40- column 58 and row 52 column 73.

8. Teat Conducted: Hydrostatic 0 pneumatlcD Nominal Operating PressureD Exempt[!j Other D Pressure psi Teat Temp. _ _ _ _ _ OF

9. Remarks ~See~~I~te~m~7_ _ _ _ _ _ _~~~~~_~~~-=~~_~~~~~~~ _____________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I cartlfy that the statements made In the report are correct and that this conforms to the requirements of the ASM E Coda, Section XI. Type Code Symbol Stsmp NlA _ _ _ _ _-:.w,,;;I&\'-'-_ _ _ _ _ Explration Date NlA l~ ~~~~:gJ~~:;:::..,=--.,--_=-!:!El.!!!ri!!!n!!!t(!J!!!:n!2de~n!!...t '1112, It " ~~V~----~--____----~~~~~-------------------------------------- Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commlsalon Issued by the National Board of Boller and Pressure V....I Inspectors and the state or Province of GeOlpja and employed by Hartford Steam Boiler InsPection 8nd InSurance Co. of Connecticut of I:lDjJ!orrJ ~1l1. have inapected the components described in this Owner's Report durfng the period _ ...31~17.;L[.ulQ'___ ___,,-1 to 4?:17=t§~ and state that to the beet of my knowledge and belief, the OWner has performed examinations and taken corrective measur.. deecrlbed In this Owner's Report In accordance whh the requirements of the ASME Code, Section XI. By Signing this certificate neither the Inspector nor hla employer makes any warranty, exprassed or implied, concerning the examinations and corr e measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall Ie In any man er ny personal jnJury or property damage or a loss of any kind ariSing from or connected with this ec

  ~o:::::::_::::;:;..E-~--,~~-dI-~...L..:.-=------                   Commissions ___       :"'!'""':':----:-:Gt1::::"---:""'~O:--::O:_'/<;...a::j$=-~~-------:------

National Board, State, Province and Endoraements

FORM NIS-2 OWNER'S REeRlif~CEMENT ACTIVITY As Required By ~ 0 on XI Traveler. 10036

1. Owner Southem Nuclear Operating Company Date May 13,2010 Name 40 Invemess Center Parkway, Binningham, AL Sheet of Address

2. Plant Vogt/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 2081728201 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Dee,artment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant Voatle Expiration Date NlA Address

4. IdentHlcatlon of System 1201/ Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. 1111977 Edition, Summer 1979 Addenda, _ _Nl....;....:A____ Coda Case (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity 2001 ED. 2003 ADD.

(c) Applicable Section XI Coda Case(s)

6. Identification Of Components National Corrected, ASMECoda Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identlflcetlon Built Installed (Yes or No)

VALVE TARGET ROCK 126 NlA 2HV8095B 2009 REMOVED YES VALVE TARGET ROCK 125 NlA 2HV8095B 1983 INSTALLED YES

7. Description of Work Valve sin 126 was replaced with valves/n 125.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exempt!!]

Other D Pressure psi Test Temp. _ _ _ _ _ OF

9. Rema~ _S:88~~/~~m~7_________~~~~~_~_~-=_~ ____

Applicable Manufecturer's Data Reports to be attached

                                                                                                                                  ~_~~~                   ____________

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. NlA _______:..:.:...:..-_ _ _ _ _ Explratlon Date NlA tt~1 Signed Date s1t 7/'<1 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Stearn Boiler Insoection and Insurance Co. of Connecticut of ~~cut have inspected the components described in this Owner's Report during the period _...;&~'25.<Z""%J.!10"--_ _--,_1 to k=;l,3:fO ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures deacribed In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing thi certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the XJHnfIl~ons and co ve sures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall liable personal injury or property damage or a loss of any kind arising from or connected with this pectlon. tc;O"";=-::7.......-"7""'--:l-.:-::-:-..z..:.-.....;.----- Commissions G1J OO/IS

                                                                                --:::N-=-a-:-:ti:-o-na-='-:B=-o-a';;"rd"'f','-:S~ta:-t:-e-,=Pr-o-v-=-,n-ce-a-n-=d-=E=-n"":d:-o-rse--m-e-n-::"ta---

FORM NI5-2 OWNER'S .,Q.DJGINAl:LACEMENT ACTIVITY As Required ~ SectIon XI Traveler' 10042

1. Owner Southem Nuclear Operating Company Date Apri/28, 2010 Name 40 Invemess Center Parkway. BiTmingham, AL Sheet of 3 Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 2092065001 Address Repair/Replacement Organization P.O. No., Job No., ate.

3. Work Performed by Maintenance Department Tp Code Symbol Stamp NlA Name Authorization No. NlA Plant V!!fJ!!.e Expiration Date NlA Address

4. Identification of System 1201 I Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. III 1971 Edition, Summer 1972 Addenda, _--..,;N!.:..:.:..~:....-_ Code Case (b) Appllceble Edition of Section XI Used for RepalrlReplacament .ActIvity 2001 ed. 2003 add.

(c) Applicable SectIon XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stsmped Component Manufscturer Serial No. No. Identlflcetlon Built Installed (Vesor No)

BOLTS ASTRO NUCLEAR AGA I HT X6363, NlA 2-1201-B6-OO2 1989 INSTALLED YES P45581HT 64774 BOLT tONICS 1211-2A NlA 2-1201-B6-a02 1989 INSTALLED YES

7. Description of Work Replaced three bolts on the secondary manway (manway side).

8. Teat Conducted: Hydroststlc D PneumatlcD Nominal Operating PressureD Exempt[!]

Other D Pressure psi Test Temp. _ _ _ _ _ DF

9. Remarka~S~ee~/~tem~~7_________~~~~~_~_~~_~_ _ _~___~~________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stsmp NlA Certificate ~!atJ~n________;..:N/,;.;.~.:.-_ _ _ _ _ expiration Date NlA . ~..p Signed ~ ~ Superintendent Date %..!..::-':...t!)--:,I_£_I!3_ __ __.... '7/.\",Q Owne~ f'8Designee, Title U~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission laaued by the Natlonsl Board of Boiler and Pressure Vessel Inspectors and the state or Province of GeoroI@ and employed by H@rtford Steam Boiler Inspection and Insurance Co. of Connecticut of H8rtf~t!1C~ heva Inspected ttle components described In this Owner's Report during the period 3I22/2Q1Q to .. :::t;; .00( and state that to the beat of my knowledge and belief, the Owner has performed examinations and taken corrective mea res described in this Owner's Report In sccordance with the requirements of the ASME Code, Section XI. By signing this ce cate nsither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the

                    . Ions and co         *

m ures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall able n any manner fo a y personal Injury or property damage or a loss of any kind arising from or connected with this

        .......-......:::;~~~-f-:-...".,..---:..---.;;----- Commissions _----::,.....6-It--,-:"...-;:;...,.-6:--c....;/.",...::...{~.....,.....--.,..,---.,.----

National Board, State, Province snd Endorsements Date____~~==__~_______

IONlCS, INCORPORATED CERTIFICATE OF COMPLIANCE CUSTOMER NAME: SUPPLIER: Westinghouse Electric Co. LLC lonics.lnco~orated RRS 3039 Washington Pike 1000 Westinghouse Drive Bridgeville, PA 15017 New Stanton PA 15672 lonies Job No.: 1211 W P. O. No.: 4500082696 Latest CIN: 1 W Sales Order No.: 14730

".

A. Item Identification (as applicable) loDlalne. Item Part Name Part/Dwg. No. SPIN Qty. s.o. SerIal No. No. 1 Bolt, Manway 6SlB293H03 Rev. 19 RCPCSG 10 0120 1211-1, 1211 Closure, Sec. 2A, 1211-3A, 1211-4 tbrU 1211-10 W Mod. 2655A05, Rev, 6 lIT # 8995629-Q3827 Customer Mat ## 5302000013966 TR# 14826 Visually Inspected per vr-l04, Revision O. and accepted . ASME SA 193, Grade B7 ASME Section m, Subsection NB. Division 1. Class 1. 1971 Edition, Summer 1972 Add. 10CFR.S0. AppendixB and 10CFR21 ApplieS..

                                                                                                                                    ,I Customer Order No.: 7053183 Item 1                                                             Project: GAB NODConfonnanccs: None                                                                          Shelf Life: N/A Work performed in accordance with lonies Quality Assurance Manual Rev. 6, dated 5111100 as approved by the J\.SME Code.

loDies Certificate ofAuthorization number N-2974-1, expires March 26. 2002 and Extension of Expiration Date for ASME Certificates ofAccreditation Letter dated February 14.2002. . We certify that, with the exception of the approved nonconformances listed above, these items are in compliance with the procurement document and that all required tests and inspections have been perfor;med. and the results accepted. Documented evidence supporting this Certificate ofCompliance is available for review. Items supplied for shipment with (W) procurement document 4500082696 are certified to be interchangeable with referenced part drawing rev. as to fit, function, and materials, and that any known changes in these characteristics have been reviewed and approved by the Westinghouse engineering function to assure that interchangeability has been maintained consi~g Westinghouse Equipment Specification and ASME Code requirements. as applicable. Signatur'e_~~~~,--*_e .........Jw.<_*J.-,-;d:i;;...;;..t:xs,,--_ _ _ _ __ Quality Assurance Porm No, NI27 Rev. I . Page 2

Rev. B r~:3 .. F .3 Astro Nuclear/Dynamics Inc. Certificate of CompThi.nce and Quality Assurance Material Release Cl.!STOMER NAME: SUPPLIER: Georgia Power Company Astro" Nuclear/Dynamics Inc. Vogtle Electric Generating PIa 811 Rout~ 51 South Nuc Ops Warehouse, River Road Large, PA 15025 Waynesboro, GA 30830 ANDl Job Number: H-0448 Customer Contract No.: 70166790000 Latest C/N No. N/A A. Item Identification (as applicable): Item ANDI No. Part Name P~rt/Dw9. No. Spin Qty. S.O. Serial No. 001 Bolt, Machine 651B293H03 Rev. 19 RCPCSG 8 N/A Trace: AGA MPL/Tag: 1120186002 & W Spec 2655A05 Rev. 6 HT: X6363

  ~~SME SA-193 GR'_.,-::;:.B~7-'-t_S=-=--P-::-ct. III, Div. I, Class 1,1971 Ed, S'72 Addenda.

001 Bolt, Machine 651B293H03 Rev. 19 RCPCSG 2 N/A Trace: P4558 MPL/Tag: 11201B6002 & W Spec 2655A05 Rev. 6 HT: 64774 ASME SA-193 GR. 87, Sect. III, Div. I, Class 1, 1971 Ed, S'72 Addenda. Nonconformances: NONE 10CFR21 - Applies A.N.D.I. Certificate of Authorization number N-2869 expires August 7, 1995. We certify that, with the exception of the approved nonconformances listed above, these items are in compliance with the procurement document and that all required tests 8.nd inspections have been performed, and the results accepted. Documented evidence supporting this Certificate of Compliance is available for review. QAMR Release No: ANDI-93-0249 Shipment No: 700

            ~~'_ _ _ _ Date ~I                        t" J~J9,.3 QAMR Distribution:

Signature Quality Assurance: Two (2) Managei' Ity Assurance with Shipment: TwO (2) Form No. A9231 Page 2

FORM NIS-2 OWNER'S REP~fI:I~~"IM1.~CEMENT ACTIVITY nXI Traveler. 10043

1. Owner Southem Nuclear Operating Company April 21, 2010 Name 40 Invemess Center Parl<way. Birmingham, AL Sheet of 3 Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 3C83O 2070841501 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp /IVA Name Authorization No. /IVA Plant VOQtle ExpIration a. N/A Addre..

4. Identification of System 12011 Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. 1111977 Edition, Summer 1979 Addenda, _--...:.NI.,:;;:A:...:......_ Code Case (b) Applicable Edition of Section XI Used for RepairlReplacement ActIvity 2001 ED. 2003 ADD.

(c) Applicable SectIon XI Code Caae(a)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE TARGET ROCK 197 NlA 2HV8096B 2DD9 INSTAllED YES

7. Description of Work Valve sin 128 was replaced with valve sin 197.

8. Test Conducted: Hydrostatic 0 PneumatieO Nominal Operating PreseureO Exempt[!]

Other 0 Preseure pal Test Temp. _ _ _ _ _ OF

9. Rernarka_S~ee~~fte~m~7______________~~~~~__~~~-=~~ __~~~~~~~_____________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the stataments made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA Certlfleate~f h No. __________...:NI.:..::.:.;:A:...-_________ Expiretlon Dete NlA ~ Signed Superintendent Date ~ It 0 ~t"" ~'a Design... Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the Nattonal Board of Boller and Pressure Vessal Inspectora and the atata or Province of Georgia and employad by Hartford Steam Boiler lospsct!on and Insurance Co. of Connecticut of _ C=ecticut have Inap8Ctad the components described In this Owner'a Report during the period _ ....:nUJ.z~'I1u.Q'-- _ _ _ _1 to ft:iZ:::::.i6.-!..f2 -' and atata that to the best of my knowledge and belief, the Owner has performed examlnetlons and taken corrective measurea dsscrlbed In this Owner'. Report In accordance with the requirements of the ASME Code, Section XI. By signing th certificate neither the Inspector nor his employer makes any warranty, expre88ec:l or Implied, concerning the examlnetlons and cor Ive easures deacrlbed In this Owner's Report. Furthermore, neither the Inspector nor his employer ahall e I to ny personal Injury or property damaga or a loss of any kind arlalng from or connected with this tl

r:M

     ~=__'.:;.y:..--.::;--+.:c.c::~~L....;~---- Commissions _:-:-:-:_l.:Yj-=-=----:--=-O~D_=I                      ...../_:5-_-=-=---:------:--

National Board, Stete, Province and Endorsements Date 6-';:;'-fD

c FORM NPV*1 CERnFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES'" AIJ Required by the Provisions of the ASME Code, SectIon III, OMslon 1 Pg.1of 2

1. Manufactured and certified by Target Rock: 19§6E Broadhol!ow Road; E. Fannlngdale. NY 11735 (name and address of N CertifIcate Holder)

2. Manufactured for __W~esti=n....g.....

hou""",s:::l:e,.,.E~!ectr!~;:=:c~Co~m~pa:::ny~it:1000~-!-W~'F'sUng~::II:h~ollllyse~D=:.!r",'i,..!.;N~ew~S~taiillnto.wu.nll..'.!..PA~_ _ __ ("ame and addren of Purchaser)

3. Location of Installation Georgia Power: Vogt!e Electric Gen. Plant. 7821 River Road. Waynesboro. GA 30830 (name end address)

4. Model No., Series No., or Type 79AB-001*2 Drawing 79AB-001*2 Rev. _.:o:G_ __ eRN NlA

5. ASME Code, Section III, Division 1: _",!,11.l19;;,.7~7.....,...._ Summer 1979 1 None (edition) (addenda date) (class) (Code Case no.)

6. Pump or valve Valve Nominal intet size 1 OlItiet size 1 (In.) (In.)

7. Material: Body SA182 F316 Bonnet SA479316 Disc SA564 630 Bolting .....!..:!Nl~'A:-__

(a) (b) (e) (d) (e) Cert. Nafl Body Bonnet Disc C Holder's Serial No. Board No. Serial No. Serial No. Serial No. 197 NJA 7509 4158 3134 NJA

SUpplementallnformalion in form of lists, sketches, Of dr.awings may be used pnMded (1) size IS 8"Ar x 11. (2) Information In /tems 1through 4 on this oata Report Is Included on each sheet. (3) each sheells numbered and IIle number of sheets Is recorded at the top of this form.

c (12188) This form (EOOO37) may be obtained from the Order Dept. ASME. 22 Law Drive. Box 2300. Fairfield. NJ 01007*2300 REPRINT 6193

c FORM NPV-1 (BACK - Pg. 2 of 2) Certificate Holder's Senal No. 79AB-OOl-2 sin 197

8. Design conditions 2485 psi 650 of or valve pressure class _ _--I.:NlII.I'A~___ (1)

(pressure) (temperature)

9. Cold working pressure _ _-"40""'32=-_ _ _ P8i at 1OO"F

10. Hydrostatic test _~60::50~_ _ _ psi. Disc differential test pressure _ _....:..;NI....'A.:..-_ _ _ _ _ _ _ _ psi

11. Rema~: __~I~nd~lca~ro~r~T~u~beLS~A~4~7~9~3~16~S~~~58~09L______________________________

CERnFICATION OF DESIGN Design Specification certlfled by _......lTw,...==Eo..I.A~u~b:::le~_ _ _ _ _ P.E. State PA Reg. No. 27055E DesIgn Report certified by _ _ _-..:.:X.....S.......:.;Ka=rid""'_ as _ _ _ _ _ P.E. State NY Reg. No. 056Q47 c CERnFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this pump or valve conforms ro the rules for construction of the 'ASME Code, Section III, Division 1. N Certificate of Authorization No. _ _ _.....N.......... - 194""""'7_ _ _ _ _ _ _ Expires 1211212010 Date 7/2"1/11 Name TametRock Signed ~ fLr (N Certificate Holder) John DeBonis. QA Manager (authorized representative) CERTIFICATE OF INSPEcnON I. the undersigned, holding a valid commiSsion issued by the National Board of Boller and Pressure Vessel Inspectors and the State of Province of New York and employed by I m of Lynn. MA have Inspected the pump, or valve, described in this Data Report on and state that to the beet of my knowledge and belief. the Certificate Holder has constructed this m. or valve. in aCcordance with the 'ASME Code, SecUon III. Division 1. By signing this certificate. neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the component described In this Data Report. FtJrthennore, neither the Inspector nor his employer shan be liable In any manner for any pe I Injury or property damage or a loss of any kind arising from or connected with this Inspection. . DatYd'7jdJ S :::...:~~~~;;:;~If1'I!mi88Ions #Y5~ (Naf!. ad. (incl. endorsements) and state or provo and no.) c (1) For manually operated valves only.

FORM NIS-2 OWN "'~-=-FIEPLACEMENT ACTIVITY As ReqlUir41.B1.. Section XI Traveler. 10044

1. Owner Southam Nuclear Operating Company Date Aprl121.2010 Name 4() Inverness Center Parkway. Birmingham, AL Sheet of 2 Address

2. Plant Voglle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 2070841501 Address RepairlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. NlA Plant VggJle Expiration Date NlA Address

4. Identification of System 1208 / Chemical and Volume Control System

5. <a) Applicable Construction Code ASME Sec. 1111974 Edition, Summer 1975 Addenda, NlA Code Case (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity 2001 ED. 2003 ADD. -......;.~-

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Senal No. No. Identification Built Installed (Yea or No)

PIPE SYSTEM PULLMAN NlA NlA 2K4-1208-486'() 1 1987 INSTALLED YES

7. Description of Work Replaced piping between valves 2HV8095B and 2HV80968

8. Test Conducted: Hydrostatic D Pneumat\cD Nominal Operating PressureD exempt[!]

Other D Pressure pal Teat Temp. ______ OF

9. Remarks See Item 7

                             ~~~~--------------~Ap~P~II~ca~b~l-e~M~a-n-u7fa-ct7u-r-er~'s~D~sta~R~e-po--rts~t-o~be--atta~-ch~ed~---------------------

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA tI _________:..:N!.:.:."'.:..-________ Expiration Data NlA Jt\~ Signed Data :;-/Z,Ih0 rl~,~----~~~~~~~------------------------------~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commiSSion Issued by the National Board of Boiler and Pressure Vessellnapectors and the stata or Provfnce of GeOrgia and employed by Hartford Steam Boller Inspection and Insurance Co. Qf Connecticut of Harlford ~.cll.t have Inspected the components described In this Owner's Report during the period __...312~314..U1Q"----~__:-1 to 7A*JC> ; and stata that to the best of my knowledge and belief, the Owner has performed examinations and taken correct'1Ve meaaures deacrlbed In this Ownar's Report In accordance with the requirements of the ASME Code, Section XI. By signing this iflcats neither the Inspector nor his employer makes any warranty, expreased or Implied, concerning the e ami nations and corr

surea described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall a In any mann r y parsonal injury or property damage or a loss of any kind arising from or connected with this Clio

    .........'"'===""'"'4--;--"---!---:-::::-:----:------- Commissions                   _:-:-:-:----:-::::Gf}"---~~()--=D--'{:_1:...5-_::_:::__:_--_:_--

National Board, State, Province and Endorsements Date ____~~__~~_______

                                                 ** IiAttp".IK, INC. ~1I"MOI'iI WOIlKl
                                                          !loJ( 1220. SeR~NTO"; PA.tt$!!i     PH, 711*,.,*$1" I'tANT*L~T,ON;. !Nfll$fAl1 II, WAVllltr IXIJ lit If!M            $P!C:IA L COQI1 P...1089-l                            0560629 GPO STOCK1IPPCA0255
                                                        'UEM4J 03 CONSOLIQA'l'ED P!l'E& SUPPLY AS'I'M cA.-312, ASHE SA-3U, ASME SECTION III: ~A.SS 1 ASHE SA-655 CLASS 1 19l¥O EDiIT'tQN THRU WI~ER 1980 ,AnD. AND BECHTEl. SPEC X4AQ34~ REV. 2' SANWtt S~~!SS STAtJ'fL!'SS STEEL ANNEALS>> PIPE 'lYPE' 304t. II. sea 160

Ma,lys1s 1 %

nut c S1 Mn p s Cr Ni Mo 467381,) .016 .46 1.26 .017 .00) 18.30 10.29 Cb Ta '1'1

    -.Meehan i .            Tests Heet            Yield Str.              Tensile Str.                      Elong.      Hydr. Pres. Test psi                     psi                               2", %       psi 467.386         35,400                  87,800                            63          2500 Flattening Teat:           OK All material subjected to a final solution annealing heat treatment with material

At a teDll'.eratu.re of 1900" F minimum followed by rapid water quenching to below 800 deS. F in 1e$8 t~an three (3) minutes. per G.P.C. Spec X4AQ34A, REV. 2 Sec. 7.0 Material bas been line marked: SV SMLS 1" sea 160 TP 304L HT 467386 tSlK 4-312/A~376 WO 60629 Cede' "wo 6<l629 n identifies material in aceordance wi th ASHE SA-655 Class 1 materia11\as been ultrason.ic tested in accot'dance with ASME Section III,

         'Class 1 Para. tm-2S50; OK Thts ts- t.o certify that the contents of this certificate are correct and flceU1:$!I:.I:l~ 4S e.ootained :in Sandvik t s records, and that all above test results and :bl.re:1fa:t1ons pe'rfonned are in compliance with the requireltl.ellt s of the piJ.rcl'utse o'tlier and the applicable sections of the code and specifications as de$:taiut1!~ by the pUrchase- order.
       * ,..Sl!R:Qu.,:it'ity Syst.em CerUfieate (matiuials) No. N-1400. Expirat:ion Date: June 11, 1982.

. . . , lifa~,ial;w~u$ manufactured under a qu,al1ty program which was approved by Bechtel Corp~ i:,.$.U:~;,31~~tgl. .' f'., F6.~;*~~1ty _ranee . . .ager(p_A_SA_3. ,.v. 6)bab

FORM NIS-2 OWNE ;.AIJd:~EPLACEM ENT ACTIVITY As AAtllul..._ ~.I:I~iJe Section XI Traveler. 10046

1. Owner Southern Nuclear Operating Company May 27, 2010 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of 5 Addre..

2. Plant Vogtie Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 2090233701 Address RepalrJReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Cacle Symbol Sbtmp /\VA Name Authorization No. /\VA Plant Vll9J!e expiration Date /\VA Address

4. Identification of System 1201/ Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec III 2001 Edition, None Addenda, _......;.NI..;;;..~'-'-_ CodeC...

(b) Applicable Edition of SectIon XI Used for RepalrJReplacement Activity _ .... 200_'...edo=:,.....:2.0

                                                                                                                              ..........

03 a...dd........._ _ (c) Applicable SectIon XI Code Case(s)

6. Identification Of Components National CorreC1ed, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Ves or No}

REACTOR COMBUSTION 7372 22004 2-1201-V6-001 1979 INSTALLED YES VESSEL ENGINEERING INC.

7. Description of Work Replaced CENTA compression collar pen #77

8. Teat Conducted: Hydrostatic D PneumatieD Nominal Operating pre..ure[!] ExemptD Other D Pressure psi Test Temp. _ _ _ _ _ OF

      ~      Remarks _S~ee~~ffe~m~7______________~~~~~__~~~-:~~__~~~~~~~__________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA ________.--.;NI.:..=:..~.;....._________ expiration Date NlA ¥~

.,r  Signed
    ~------~~~~~~~~=-------------------~------------------~

rintencient Data CERTIFICATE OF INSERVICE INSPECTION 6"'/2.7/1 0 I, the undersigned, holding a valid commission Issued by the National Board of Bolier and Pressure Vessel Inspectors and the state or Province of Georg;a and employed by Hartford Steam Boiler lf1SDectjon and Insurance Co. of Connecticut of ~~~t have Inspected the components described In this Owner's Report during the period 313Q11Q to~:=15= and atsta that to the best of my knowledge and benef, the Owner has performed examinations and 18ken corrective urea deScribed In this Owner's Repoff In accordance with the requlrementa of the ASME Code, Section XI. By elgnlng this cate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the ons and correctl ea described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall liable or ny sonal Injury or property damage or a loss of any kind arlalng from or connected with this

    ~=:;;.::z~~~~....!...:...:.::::!-

nspactor's Signature Commlsslona ---:-:-::---::-::~:-=-:--::::-:-:=:O:--{)~t...L-{~---::=-::----.----_ National Board, State, Province and Endorsementa D~. / -iD __~~~__~___________

f.+jE ,J{cr ..5._.__.._____

Quality Release & Certificate of Conformance j/t. / e'/ , s~ 1 Westinghouse Electric Company LLC ~ 9.J.J. 71) Nuclear Services '? ..:J-~ ~ - / /) 20 Intem8Uonal Drive QR- 124497'()1 HeY: --'L-Windsor, CT 06095 auslneu UnIt: Nuc!Mr Seryices on.: 3125110

1. Custaner Name: 2. Plant SIte: 3. CuslXlmer Order No. and Latest Rev: *. 'Ii. Network Number.

Geolgla Power Company VogUe Units 1 & 2 7092270 Dated 03-24-2010 124497

s. Westinghouse Sales Order No: 6. 'Ii. Purchase Order No: 7. W P.O. CJN I: 8. W. P.O. Item t: 9. PAR: 10. Supplier S.O. No.

68048 See Data Package -- - NA -

11. Malerial Specificadon: 12. Rev: 13. Drawing No: 1*. Rev: 15. Basic Componenl Yes 181 See Data Package NA 10002EOS 00 No 0 i

18. ASME Code Section: 17. ASME Code Class: 18. ASME Code edition and Addenda: 19. Code Cases:

SectIons" & III. Subsection NB Class 1 2001 Edition - No Addenda None

20. Item Name: 21. Part Number: 22. Quantity ReJeaaad: UIM:

Vogde - Version 3 CETNA See Data Package See Data Package

23. Serial Numbeni: 24_ Hesl Number(s): 25. Other:

See Data Package See Data p8ckage - The attributes listed below were revievWKI and approved by Quality as noted by an "A" in the status column. "NJA"lndicates Non-Applicable items. Records are all8.llable for review. Contingenl Items ere identified by a .0" In the stalUs coILlnn and are explained in the Remarks section. A Statui .I!!mII §!AIYI u A Supplier Cart. of Conformance A Cleanliness A Packaging d A Material Certifications NlA Operating Electrical Test Records I NlA ASME Data Report Fonn(s} Attached 0 I NlA Heat Treat Records NlA Non-Operatlng EIec. Test Records NlA Certified Stress Report c NlA AT Flm and Recoms NlA Pressure Test Records NlA SpeclaJ Handling. Storage. Install Instruct. h A PTRecords NlA Seat Tightness Teet Records

c NlA MTRacords NlA Performance Test Records NlA A

Instruction Bodes W~ C of C (Quality Release) k I A UTRac0td8 NlA Welding Personnel Qual. Cerl NlA Westinghouse C of Q i VIsual Inspection Recorda I

ANlA Dlmenslonallnspeclion NlA NlA NDE Personnel Qual. Cerl Painting NlA NlA CusIXlmer QA Data Package Required? 181 Yes or 0 No 27. ConIingentQR R

26. RemadI:s: See Index to Rac0td8 (Page 3 of this QR) for total documents attachec.

DYes or 181 No

*m

r 28. Oevia1lon HoIfces DYes Of aNo k
Liat applicable DNa:

None

                                                                                                                                          ~lIIUMIdto"'.~1
                                        ..

WGIIIIngIIGuM Sec:DIc ~ U.CQIIIIIy.-IllalIor ... ~ _ _III""""""", .. 211. Supplier: ccnlnll:lUll cp..oIIIIyNqUl_ ' - been 1M!. lba ....... IUPJIIIiIr _ _ IhIt1he .......... IIbowe ......... _ _ _ oC1hepU~ See Data Package onIet.-"_"--" W-.-_~IIOIdInCe~ . . _ - . _ _ - ____ IIbowe.--....!1O~--NqUl- ThIIt . . . . _

  ...... ritIIII w~~_ _ _

q .... r-.;ecI1he _upon~oCanr ilia pUrdIa. _ _ order.__ incIudngW~.

__

not dgllt'"

30. Supplier SIgnature:

131. Date: See Data Package See Data Package 181 ThIs order has been processed In accordance _ rMnG.~A,.Il/

32. the Westinghouse Quality Management System (OMS). Revision 5 dated 1001102.

33. 181 This order has been proceued under the Weellnghouse ASME Code Program (WCAP-12308), Revfslon Z1 dated 118110. Westinghouse ASME CeI1IfIcata N-1149 (eJq:l/nldon data 11124110) applies.

WestirV10use Quality V #

Page 1 of3 F6.9-1 (Rev. 7 plus 31151101

e* \ Y 8 s I I n I I I. O U S 8 . Quality Release & Certificate of Confonnance Westinghouse Electric Company LL~ Nuclear Servlc.. QR- 1§C!023.29M.Q2 AM:.L

                                                                                                                          ....... UnIt: "".1IIlrtw Data:               71t31D1

1. CUIIIamer Name: 2. PIanI SIIe: a. CuIfxImet Order No. and I.ataIt Rev.: 4. WNelwaItl Number.

WeeInghouae EIeddc II'MJt'Iby (CeTNA) NA 118102 I. \'VeIIfngIIouIe SaIeA 0nIet No: *. leY. Purchae 0IdIt No: 7. Yt P.O. CIN ~ I. Y.t P.O. 11m ~ .. PAR: ,0. SuppIIIr S.O. No. NA 4500232955 CHi 2 yea 1S014 11* ...,.,.. specllcation: t2. R8v: 13. Dra\Mng No: 14. Rev: 11.8aIc~ Va SA 419 TP304 Cond.A NA 100011:34 05 No 0

11. ASME Code SedIon: 17. ASMe Code aa.: 11. /ItSNIE Code EdIIan and Adc*Ida: 11. COde Cases:

Sections U& tn, Subsection HB Clasa1 1989 EdI1Ion, No Addenda None 1996 EdItIon thru 1996 Addenda

20. 11m Name: 21. Pelt Nwnber: 22. QuanIly Released: UIM:

Compreaion CoUar 10001E34-5 13 each ZI. SefIII tfurnIIcn: 24. Hell Number(.): 21. OIW: B0607018 tIvu B0607030 238296 NA ! , d l

...

TIle atIdMIIJ IIIfIId below WIAI ftIIIfewed and appRI'IIId by Qually. noted by an -A" In Ihe Ifatua caUnn. "NIA"1AdIcIIIIiI Non-AppIIcIbIe

      ..... R8cords _1MIiIIIbIII for..... Canllnglnt IIImI 1M IdII'IIIIed by I "C" In Ihe ..... column and _1IICpIaIned In the RemIIb IIdIoR.

A A NIA Suppler Cefl of ConformIInc:e MIIIIItIII Cel'll!k:llrxl$ HellTI'IIl tlecDnIs

                                                          .-A NlA NlA CJeInIInea 0pefIICkIg ElectrICaIT8ItRecoRrs Non-Operdng Sac:. T. . Reconts
                                                                                                            §.tICIa A PeckIgIng NlA ASIE Data Report Fonn(s)               Att8chIdO NtA CedIftId S1nIu RepoIt c      NlA     RT FIm Met IWcanfI                          NlA   PreIIuIw Tilt f*ordI                        NIA SpedII HandIng, StInue, ....... JnaInIct.

It NlA 8eIII llgIItneu Tilt Recon:Is A PTf*ordI

- NlA MY Recorda NlA ~TIltRecolda NlA IaIbucIon Boob NlA W_lIngho'lIIt cole II I

I A ur RIICCII'dI NlA WeldIng PllrtaalNII Qual. Celt. NlA WlltlnghouM C 01 Q NtA VItuaIll'\lPldlOn.-a1de MIA HOE PenroIVIeI Qual. Cert. NlA

*I      A       0ImentI0IIIf htpIdIan                       MfA   PUllIng                                     NIA

~

..

eu.tomer QA DatIl Pac:IaIge Reqund?

      ~ PO
          ~ DatI PaI::II:ICI<< EIe¥en (11) abdIed PIIQIIS.
                                 <48001"""

a V.. OT 0 No 11m t:2 formalllrllll ~ ReIinIICIt PT371 141:Jr F1uof8ICIftt PenICnInt Intpedion.

                                                                                                                         %I. CoIOigInt QR OVa or IlNa a    DeNIIIon_

OVaorllNo lilt appIcI/IIII DNa: Nolle

                                                                                                                                                ~_d8ched
   ~              ......        ~w:QuIIIIr..-        __ ............_ _- . ..                                                                   iD ....
  .........,-*-....-.....
                   =:........._...........__...............,........                             a.SuppIer.
  ............. , .......................................-.-..........

n.........

  ...................................._ _ ............ 'l11li ........."'"

Ben FtanklIn o.Ign & Mfg. Co., Inc. aa. Suppler SIfpMIlura: ~1. DatIl:

 .............. d ....................- .........................'"
 ................IIIIIIIMIr"'............. -.....,.~                                                See Data PacIcate         /                     71111r11 32.

33. B llIII alder ... 111M Plocun" In 8CCCIIdIme wlthlhe W_llIghou.. QUIIly

            ........... SyUem (QIIS). RevIsIon 5c1111d 1(1101102.

B llIII alder ... bMn pnx**** d under Ihe \VIItII1ghouM ASME Code PIogrMI (WCAP-12301). R8vIIIon 22 ciIeId 8f1 111M. WIItrnghouIe ASME Oeen G. ByeltfU f1~fJ/ c...N-11*(. . . . . . . . . 11J2.W7) _ _ Weltinghoule Q.ueI.y rr II 01 II

Westinghouse Network No. 124497 Customer PO No. 7092270 QA DATA PACKAGE DrIwlng No.: ClanlftCllllon: 10C112E08. Rev. GO A. Safety Related (ASME Code) 100D1E34, Rev. 05 B. Safety Related (Non-ASME Code) C. Safety Related (DecIcated) D. Non-SdIly Related CONTINUATION PAGE - QR-124497-o1 Cust W PO Item Oty. Description C Part No. Rev Serial No. Heat No. Procurement Item,. No. (SAPMMNo.) L (As. Built Part No.) (Lot No.) PO No. 001 1 1 Compression Collar A 10002E08-5 00 80607029 238296 4500232955 FAB (10001E34-5) (05) 4500148348 MAT

                                                            ..............

Quality Control Representative jj_flJ/ Date: %0, Cognizant Engineer //~ -~ ~~ - Date: :lj2-vj;D

                                                                                 ,
                                                  /
                                                                                                         "

Pagc2of3 A.9-1 (Rev. 7 pUll 3/15.'10)

f~~~e :JIPP5 Pnfetype Parca Predadlo. R... CBen PrQ,n~ tDuign 6'l9ttfg. Co, Inc. 938 Saflield Street P.O.Bu_ Apwua, &fA 01001 Teleplloar. (413) 716-4UO

rD: (413) 789-3211 eRTIFICATE OF COMPLIANCEJ DATE: 07111107

. CUSTOMER: DESCRIPTION: COMPUSSION COLI.AR Weidaghouse Electric Co. QUANTITY: 13 20 IDternatioaal Drive CUSTOMER. P.O. 45OmZ955 LINE 1 Wmcbor cr 0609S OUR JODI#: 15014 PIN lOOOIE34-5, DWG. 10OOlE34 REV.OS MATERIAL: 4.0 INCH DIA., SA479 TYPE 304SS. PURCHASED UNDER WESTINGHOUSE PO# 4500146348 QRN 4500146348-01D HEAT II 138196 SIN BfJ607018 TURU 80607030 CERTIFICATION OF COMPLIANCE: IT IS BEREBY cml'D'1ED THAT ALL ARTlCI..ll'S IN TIlE ABOVIC SlDPMENT AND THE QUANTITIES CALLED FOR IN THE ABOVE SHIPMENT OJ' TBE CONTRACOORS PURCHASE ORDER ARE IN CONll'OBMANCE wrm THE REQ11JB.DIENTSt SPECD'.lCATlONS AND DRAWINGS APPLICABUt TO THAT ORDER. ALL PARTS WERE MANlJII'ACJ."URED IN.TIIt USA. JAW BEN FRANKLIN DalGN QUALrrY MANUAL REV. B DATED 10110106. BEN F.RANKLIN DESIGN ... MFG.

                                                      'lGJ1nlh AUTHOR.IZltD SIGNATURE
                                                                                       .....}}

NL-10-1252, R14 Inservice Inspection Summary Report: Difference between revisions

Revision as of 17:34, 13 November 2019

Contents

Text

Enclosures:

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

Navigation menu

NL-10-1252, R14 Inservice Inspection Summary Report: Difference between revisions

Revision as of 17:34, 13 November 2019

Text

Enclosures:

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

Navigation menu

Search