Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML20033A948 + (Proposed Tech Spec 3.4.6.2.e Re Reactor Coolant Sys Operational Leakage)
- ML20086T644 + (Proposed Tech Spec 3.4.7.2, Control Room Ventilation Sys)
- ML20150F304 + (Proposed Tech Spec 3.4.8 Re RCS Specific Activity)
- ML18010B051 + (Proposed Tech Spec 3.4.9 Re Reactor Coolant Sys Pressure Temp Limits)
- ML18092A865 + (Proposed Tech Spec 3.4.9.1 Updating RCS Pressure/Temp Limits & Replacing Present Heatup Limit Curves)
- ML20203D041 + (Proposed Tech Spec 3.4.9.1.C Re RCS Pressure/Temp Limits)
- ML20064N285 + (Proposed Tech Spec 3.4.9.3, Overpressure Protection Sys, Changing PORV Setpoint Curve for Cold Overpressure Mitigation Sys)
- ML18033A180 + (Proposed Tech Spec 3.4/4.4 Re Standby Liquid Control Sys)
- ML19317D200 + (Proposed Tech Spec 3.5 Including 6.03% Quadrant Power Tilt Limit & Provision for Notifying NRC If Tilt Exceeds 3.5%)
- ML19317D227 + (Proposed Tech Spec 3.5 Incorporating Control Rod Position & Axial Imbalance Limits to Period After 100 Plus or Minus 10 Effective Full Power Days)
- ML19320A167 + (Proposed Tech Spec 3.5 Re Parameter Changes & Mods Required for Cycle 3 Operation)
- ML20081M737 + (Proposed Tech Spec 3.5.1 Re Eccs,Adding Action Statement to Specify Actions to Be Taken in Event of Inoperable Automatic Depressurization Sys Supply Header Low Pressure Alarm Sys)
- ML20042G004 + (Proposed Tech Spec 3.5.1, ECCS - Accumulators, Deleting Surveillance Requirement 4.5.1.d)
- ML20077G691 + (Proposed Tech Spec 3.5.1.4 Re Use of Shutdown Bypass Switch During Channel Testing)
- ML19312B961 + (Proposed Tech Spec 3.5.2 Incorporating Operating Limits for Unit 2)
- ML19312B777 + (Proposed Tech Spec 3.5.2 Permitting Operation of Unit 1 During Cycle 4 in Unrodded Mode)
- ML19317D270 + (Proposed Tech Spec 3.5.2 Re Control Rod Group & Power Distribution Limits & Table 4.1-2 Re Min Equipment Test Frequency)
- ML19319D767 + (Proposed Tech Spec 3.5.2 Re Locking of Control Rod Drive Patch Panels at All Times W/Limited Access to Be Authorized by Superintendent & Rod Position Limits)
- ML19312B968 + (Proposed Tech Spec 3.5.2 Revising Rod Withdrawal Limits for Units 1 & 2)
- ML20043B234 + (Proposed Tech Spec 3.5.2, ECCS-Shutdown)
- ML20140B488 + (Proposed Tech Spec 3.5.3,revising Setpoint for Engineered Safeguards Actuation Sys Low RCS Pressure Setpoint)
- ML20073D128 + (Proposed Tech Spec 3.5.3.2 Re Operability of Safety Injection Pump in Modes 5 & 6)
- ML20065R865 + (Proposed Tech Spec 3.5.B Re Containment Spray)
- ML19312B937 + (Proposed Tech Spec 3.6 Allowing Maint Intervals on Hatches & Isolation Valves for Short Periods of Time)
- ML19312B983 + (Proposed Tech Spec 3.6 Providing for Momentary Passage Through Operable Door of Inoperable Hatch)
- B13284, Proposed Tech Spec 3.6 Re ECCS + (Proposed Tech Spec 3.6 Re ECCS)
- ML20149E597 + (Proposed Tech Spec 3.6,consolidating Applicability Requirement for Containment Integrity in Applicability Statement)
- ML20086T333 + (Proposed Tech Spec 3.6.1.2 Re Primary Containment Leakage Rates)
- ML20137Q805 + (Proposed Tech Spec 3.6.1.2,deleting Proposed Change to Spec 3.6.1.2a.2 Re Reduced Pressure Testing)
- ML19327A800 + (Proposed Tech Spec 3.6.1.2,increasing Allowable Primary Containment Leakage Rates)
- ML20116N827 + (Proposed Tech Spec 3.6.1.3 Re Containment Air Locks, Expanding & Clarifying Action Requirements & Adding Footnote to Surveillance Requirement 4.6.1.3b,making Provisions of Tech Spec 4.0.2 Inapplicable)
- ML20129K073 + (Proposed Tech Spec 3.6.1.6,allowing one-time Exemption to Requirements of SR 4.6.1.6.1.e.1)
- ML20154S707 + (Proposed Tech Spec 3.6.1.7, Containment Sys - Drywell Average Air Temp, Clarifying That Thermocouple Locations Defined in Spec Are for Ref Only)
- ML20044B149 + (Proposed Tech Spec 3.6.1.8 Re Periodic Cycling of pneumatically-operated Valves & Tech Spec Table 3.6.3-1, Primary Containment Isolation Valves)
- ML20207S044 + (Proposed Tech Spec 3.6.2.1,reflecting Use of wide-range Instruments to Determine Suppression Chamber Water Inventory)
- ML20079C145 + (Proposed Tech Spec 3.6.2.2 Re Containment Emergency Sump Ph Control Sys)
- ML20154Q726 + (Proposed Tech Spec 3.6.2.2, Containment Cooling Sys)
- ML20072R260 + (Proposed Tech Spec 3.6.2.3 Re Drywell Air Locks)
- ML18100A981 + (Proposed Tech Spec 3.6.3,Table 3.6-1, Containment Isolation Valve)
- ML20106C958 + (Proposed Tech Spec 3.6.4,adding Footnote to Action a Until Startup from Fourth Refueling Outage)
- ML20112K044 + (Proposed Tech Spec 3.6.5.1,incorporating Westinghouse Reanalysis of Containment Pressure Calculation)
- ML20067C494 + (Proposed Tech Spec 3.6.6.3 Re Containment Atmosphere Oxygen Concentration)
- ML20004F294 + (Proposed Tech Spec 3.6.6.3 for Containment Sys Oxygen Concentration)
- ML19339D145 + (Proposed Tech Spec 3.6.9.1,revising Containment Purge & Vent Time Allowed Per Yr.Suppl to Licensee 810108 Justification Encl)
- ML19354E059 + (Proposed Tech Spec 3.6.A, Pressurization & Thermal Limits)
- ML20128K671 + (Proposed Tech Spec 3.6.D.2.(a),supporting Orderly Shutdown to Be Initiated on 930216 Due to Inoperable Safety Relief Valve)
- ML19312B840 + (Proposed Tech Spec 3.7 Re Limiting Conditions for Transmission Line Paths & Monitoring Operations)
- ML20077R016 + (Proposed Tech Spec 3.7(1)a.i Amend Re Testing of Emergency Diesel Generators)
- ML20099L849 + (Proposed Tech Spec 3.7, Plant Containment Sys)
- ML18051B403 + (Proposed Tech Spec 3.7,revising Electrical Sys as Result of Discovery & Subsequent Repair of Cracked Cylinder Head on Diesel Generator 1-1)
- ML20059L070 + (Proposed Tech Spec 3.7.1.1.2,Action C Re Atmospheric Steam Dump Capability)