ML21316A124

From kanterella
Jump to navigation Jump to search

Supplemental Information Needed for Acceptance of Requested Licensing Action Regarding Emergency Core Cooling Technical Specifications
ML21316A124
Person / Time
Site: Susquehanna  Talen Energy icon.png
Issue date: 11/18/2021
From: Audrey Klett
Plant Licensing Branch 1
To: Cimorelli K
Susquehanna
Klett A
References
EPID L-2021-LLA-0184
Download: ML21316A124 (6)


Text

November 18, 2021

Mr. Kevin Cimorelli Site Vice President Susquehanna Nuclear, LLC 769 Salem Boulevard NUCSB3 Berwick, PA 18603-0467

SUBJECT:

SUSQUEHANNA STEAM ELECTRIC STATION, UNITS 1 AND 2 -

SUPPLEMENTAL INFORMATION NEEDED FOR ACCEPTANCE OF REQUESTED LICENSING ACTION REGARDING EMERGENCY CORE COOLING TECHNICAL SPECIFICATIONS (EPID L-2021-LLA-0184)

Dear Mr. Cimorelli:

By letter PLA-7950 dated October 5, 2021 (Agencywide Documents Access and Management System (ADAMS) Accession No. ML21279A026), Susquehanna Nuclear, LLC (the licensee) requested a license amendment to Renewed Facility Operating Lic ense Nos. NPF-14 and NPF-22 for the Susquehanna Steam Electric Station, Units 1 and 2, respectively related to the technical specifications for the emergency core cooling system instrumentation.

The U.S. Nuclear Regulatory Commission (NRC) staff performs acc eptance reviews of applications to determine if the scope and depth of technical i nformation is sufficient for the staff to complete its technical reviews. The NRC staff also performs an acceptance review to identify whether an application has any readily apparent information ins ufficiencies in its characterization of the regulatory requirements or the licensin g basis of the plant. The purpose of this letter is to provide the results of the NRC staffs acc eptance review of this amendment request.

Consistent with Section 50.90 of Title 10 of the Code of Federal Regulations (10 CFR), an application for an amendment to a license (including the techni cal specifications) must fully describe the changes requested, and following as far as applica ble, the form prescribed for original applications. Section 50.34 of 10 CFR addresses the c ontent of required technical information and stipulates that the submittal address the desig n and operating characteristics, unusual or novel design features, and principal safety consider ations.

The NRC staff has reviewed the lic ensees application and concl uded that the information delineated in the enclosure to this letter is necessary to enab le the staff to make an independent assessment regarding the acceptability of the proposed amendmen t request in terms of regulatory requirements for the protection of public health and safety and the environment.

In order to make the application complete, the NRC staff reques ts the licensee to supplement the application to address the information requested in the enc losure on or by December 16, 2021. This will enable the NRC staff to begin its detailed technical review. If the information responsive to the NRC staffs request is not receiv ed by the above date, then the NRC will not accept the application for review pursuant to 10 C FR 2.101, and the NRC will K. Cimorelli

cease its activities associated with the application. If the N RC subsequently accepts the application for review, then NRCs licensing project manager wi ll inform the licensee, by separate correspondence, of any further information needed to s upport the staffs detailed technical review.

The NRC staff discussed the information requested and associate d schedule in this letter with Mr. Shane Jurek (and others) of the licensees staff on Novembe r 17, 2021.

If you have any questions, please contact me at (301) 415-0489 or Audrey.Klett@nrc.gov.

Sincerely,

/RA/

Audrey L. Klett, Senior Project Manager Plant Licensing Branch I Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation

Docket Nos. 50-387 and 50-388

Enclosure:

Supplemental Information Needed

cc: Listserv

SUPPLEMENTAL INFORMATION NEEDED

IN SUPPORT OF REVIEW OF LICENSE AMENDMENT REQUEST

TO MODIFY EMERGENCY CORE COOLING SYSTEM TECHNICAL SPECFICATIONS

SUSQUEHANNA NUCLEAR, LLC

SUSQUEHANNA STEAM ELECTRIC STATION, UNITS 1 AND 2

DOCKET NOS. 50-387 AND 50-388

By letter PLA-7950 dated October 5, 2021 (Agencywide Documents Access and Management System (ADAMS) Accession No. ML21279A026), Susquehanna Nuclear, LLC (the licensee) requested a license amendment to Renewed Facility Operating Lic ense Nos. NPF-14 and NPF-22 for the Susquehanna Steam Electric Station (Susquehanna), Units 1 and 2, respectively, related to the technical specifications (TSs) for the emergency core cooling system (ECCS) instrumentation. The U.S. Nuclear Regulatory Com mission (NRC) staff identified the following information insufficiencies that the l icensee would need to address for the NRC to complete its acceptance review of the application.

Acceptance Review Information Insufficiencies

1. Isolation of the Reactor Coolant System (RCS)

The core spray (CS) and low-pressure core injection (LPCI) subs ystems are part of the ECCS.

At Susquehanna, one check valve and one power-operated pressure isolation valve (PIV) are available on the discharge side in each applicable piping of th e CS and LPCI subsystems to isolate the subsystems from the RCS. The PIVs are normally clo sed and would open on a low reactor steam dome pressure signal, which is limited by a lower allowable value (AV) and an upper AV in TS Table 3.3.5.1-1, Functions 1.c, 1.d, 2.c, and 2. d. The incorporation of the lower AV in the TSs provides reasonable assurance that the CS and LPC I provide coolant to the RCS during a loss-of-coolant accident and satisfy the ECCS performa nce criteria in Title 10 of the Code of Federal Regulations (10 CFR), Section 50.46. The upper AV in the TSs provides reasonable assurance of RCS isolation. The proposed TS changes would delete the upper AV from the TSs.

NUREG-0800, Standard Review Plan for the Review of Safety Anal ysis Reports for Nuclear Power Plants: LWR [Light-Water Reactor] Edition, Branch Techn ical Position (BTP) 5-4, Design Requirements of the Residual Heat Removal System, Revi sion 4 (ADAMS Accession No. ML070850123), Section B.2.B.ii describes an acceptable appr oach for isolating the discharge side of the residual heat removal system from the RCS (i.e., that one or more check valves in series with a normally power-operated PIV shall be pr ovided on the discharge side of the residual heat removal and LPCI subsystems to isolate them f rom the RCS.

Therefore, the NRC staff needs additional information to evalua te the impact of removing the TS requirement for the upper AV on the ability to isolate the RCS. The NRC staff needs additional information that would allow the NRC staff to determine if ther e is reasonable assurance that the PIVs would remain closed above the upper AV value.

Enclosure

2. Pressure Relief Valve Capability

The submittal indicated that pressure relief valves (PRVs) are available for protecting the CS and LPCI systems from over-pressu rization. However, the submittal does not describe the adequacy of the PRVs capability to prevent over-pressurization of the low pressure piping from a loss of isolation between the RCS and low pressure piping.

If the licensee cannot show that the PIVs would remain closed a bove the upper AV value, then the NRC staff needs additional information for determining if t here is reasonable assurance that the PRVs would protect the low pressure piping from over-pressu rization when the PIVs and check valves cannot be closed.

ML21316A124 OFFICE NRR/DORL/LPL1/PM NRR/DORL/LPL1/LA NRR/DSS/SNSB/BC NAME AKlett KZeleznock SKrepel DATE 11/17/2021 11/16/2021 11/17/2021 OFFICE NRR/DORL/LPL1/BC NRR/DORL/LPL1/PM NAME JDanna AKlett DATE 11/18/2021 11/18/2021