ML20070B516
| ML20070B516 | |
| Person / Time | |
|---|---|
| Site: | University of Utah |
| Issue date: | 05/25/1988 |
| From: | UTAH, UNIV. OF, SALT LAKE CITY, UT |
| To: | |
| Shared Package | |
| ML20070B459 | List: |
| References | |
| NEL-008, NEL-8, NUDOCS 9101310208 | |
| Download: ML20070B516 (1) | |
Text
__ _ _
Form NEL 008 RSC Approvd: 57548 o
PROCEDURE FOR ADDING WATER TO THE REACTOR TANK 1.
Measure water level from the top of tank.
L-cm 3
2.
Measure water conductivity.
Pre mho/cm Post -
pmho/cm 3.
Measure pump flow rate, gpm 4.
Turn off pump, connect hose to demineralizer inlet, close pump side valve, and open hose valve. Be certain hose water is free from visible contaminants before connectir:g the hose to the system.
- 5. Adjust the hose flow rate to about 5 gpm and fill the tank to approximately 15 centimeters from the top of the tank. (Do not overfill the tank.)
6.
Measure water level from the top of the tank. (215 cm).
L=
cm 2
7.
Return valves to their original positions (open pump side, close hose side),
and disconnect hose.
~'
8.
Restart pump.
~
~~
9.
Calculate volume of water adc;ed.
(LrL )11.6 -
gal j
- 10. Calculate evaporation rate (gallons / day) gpd
- 11. Operator performing procedure:
- 12. Date completed:
Julian Day:
i L
'l 1.
Form approved by Reactor safaty committee:
Reactor Administrator:
2 4'
ate: May 25.1988 9101310208 880831 PDR ADOCK 05o00407 j.
0 4
_