| Q | CCA | Title |
---|
05000445/FIN-2012005-01 | 2012Q4 | H.5 | Foreign Material in Diesel Generator Governor Causes Start Failure |
05000445/FIN-2013002-02 | 2013Q1 | H.8 | Failure to Have Instructions When Performing Activities |
05000445/FIN-2013002-03 | 2013Q1 | P.2 | Failure to Correct Diesel Frequency Degradation |
05000445/FIN-2013002-04 | 2013Q1 | P.1 | Failure to Identify Inadequate Auxiliary Feedwater Valve Maintenance |
05000445/FIN-2013002-05 | 2013Q1 | P.4 | Failure to Initiate a Condition Report for a Degraded Reactor Coolant Pump Motor Lower Oil Reservoir |
05000445/FIN-2013002-06 | 2013Q1 | | Failure to Install Grout Under Pipe Support Base Plates |
05000445/FIN-2013403-01 | 2013Q1 | H.7 | Security |
05000445/FIN-2013002-01 | 2013Q1 | H.14 | Failed Condenser Support Causes Steam Generator Sodium Transient and Manual Reactor Trip |
05000445/FIN-2013007-01 | 2013Q2 | P.5 | Inadequate Calculations and Procedures for Offsite Power Availability |
05000445/FIN-2013007-11 | 2013Q2 | P.3 | Failure to Correct Design Calculations to Incorporate Technical Specification Allowed Frequency Range for the Emergency Diesel Generator in a Timely Manner |
05000445/FIN-2013007-10 | 2013Q2 | | Failure to Incorporate the Refueling Water Storage Tank Vortexing Design Calculation into the Emergency Operating Procedures for Containment Spray Pump Operation |
05000445/FIN-2013007-09 | 2013Q2 | | Failure to Identify Fouling on the Emergency Diesel Generator Building Exhaust Ventilation Screens |
05000445/FIN-2013007-08 | 2013Q2 | | Failure to Provide Appropriate Acceptance Criteria for the Safety Chill Water Pumps |
05000445/FIN-2013007-07 | 2013Q2 | | Failure to Provide Appropriate Acceptance Criteria and Testing Procedure Instructions |
05000445/FIN-2013007-06 | 2013Q2 | H.14 | Failure to Perform Adequate Operability Assessments |
05000445/FIN-2013007-05 | 2013Q2 | | Failure to Analyze Effect of System Harmonics on Degraded Voltage Relays |
05000445/FIN-2013007-04 | 2013Q2 | | Failure to Update the FSAR for the APDGs in Accordance with Regulatory Guide 1.70-1995 |
05000445/FIN-2013007-03 | 2013Q2 | H.1 | Failure To Establish 10 CFR 50.65(a)(1) Performance Goals for the APDGs |
05000445/FIN-2013007-02 | 2013Q2 | | Inadequate Voltage Calculations for the 125 VDC and 120 VAC Buses |
05000445/FIN-2013003-03 | 2013Q2 | H.5 | Failure to Properly Install an Air Regulator Causes Heater Drain Valve Closure and Reactor Trip |
05000445/FIN-2013003-02 | 2013Q2 | H.9 | Failure to Follow Procedure Results in Water Hammer |
05000445/FIN-2013003-01 | 2013Q2 | | Inadequate Procedure for Testing the Main Steam Safety Valves |
05000445/FIN-2013004-04 | 2013Q3 | H.9 | Failure to Initiate a Condition Report for a Degraded Under Frequency Relay |
05000445/FIN-2013004-03 | 2013Q3 | H.2 | Failure to Properly Install Auxiliary Condenser Tube Plugs Causes Steam Generator Chemistry Excursion and Unit Power Reduction |
05000445/FIN-2013004-02 | 2013Q3 | H.13 | Failure to Establish Goals and Monitor the Performance of the Auxiliary Feedwater System |
05000445/FIN-2013004-01 | 2013Q3 | H.12 | Failure to Remove Cable Material from Inside Containment |
05000445/FIN-2013004-05 | 2013Q3 | | Potential Motor-Operated Valve Single Spurious Operation Vulnerability |