ML20203P691
From kanterella
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
| ML20203P691 | |
| Person / Time | |
|---|---|
| Site: | 07105942 |
| Issue date: | 03/31/1986 |
| From: | Schwoerer F NEUTRON PRODUCTS, INC. |
| To: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| References | |
| 26802, NUDOCS 8605080034 | |
| Download: ML20203P691 (2) | |
Similar Documents at 07105942 | |
|---|---|
Category:CORRESPONDENCE-LETTERS
MONTHYEARML20245D9701989-04-18018 April 1989
[Table view]Forwards Rev 14 to Certificate of Compliance 5942 for Model 700 Shipping Package DD-87-12, Informs That Time Provided by NRC Regulations within Which Commission May Act to Review Director'S Decision DD-87-12 Expired.Commission Declined Review.Decision Became Final Agency Action on 870731.Served on 8708131987-08-13013 August 1987 Informs That Time Provided by NRC Regulations within Which Commission May Act to Review Director'S Decision DD-87-12 Expired.Commission Declined Review.Decision Became Final Agency Action on 870731.Served on 870813 ML20235M6711987-07-15015 July 1987 Final Response to FOIA Request for Documents.Forwards Documents Listed in App A.Documents Also Available in PDR ML20235M7201987-05-0707 May 1987 Responds to E Ambler 870409 Request for Exemption from Fees for GE 860228 Application for Rev to Certificate of Compliance 5942.Fees Will Be Refunded to GE Upon Receipt of Application & QA Program from Nbs IA-87-363, Responds to E Ambler 870409 Request for Exemption from Fees for GE 860228 Application for Rev to Certificate of Compliance 5942.Fees Will Be Refunded to GE Upon Receipt of Application & QA Program from Nbs1987-05-0707 May 1987 Responds to E Ambler 870409 Request for Exemption from Fees for GE 860228 Application for Rev to Certificate of Compliance 5942.Fees Will Be Refunded to GE Upon Receipt of Application & QA Program from Nbs ML20207S0081987-03-13013 March 1987 Forwards Rev 13 to Certificate of Compliance 5942 for Model 700 ML20211D8271987-02-17017 February 1987 Ack Receipt of Encl 870110 Petition Requesting Review of SAR for GE-700 Container in Order to Reevaluate Puncture Test Analysis for Cask,Per 10CFR2.206.Notice of Receipt of Petition Also Encl ML20210D6791987-02-0303 February 1987 Ack Receipt of Payment of Fee Re 861126 Application for Rev to Certificate of Compliance 5942 ML20210D6471987-01-23023 January 1987 Forwards Payment of Fee Re 861126 Application for Amend to Certificate of Compliance 5942 ML20210F3201987-01-10010 January 1987 Requests Review of SAR for Certificate of Compliance 5942 for GE-700 Container Re Puncture Test Analysis,Per 10CFR2.206.Use of Cask in Nonextended Mode Only Should Be Authorized Until Use in Extended Mode Complies w/10CFR71 ML20215M6651986-10-22022 October 1986 Notification of Deletion as User of Model 700,in Response to 861007 Request ML20213D9271986-10-0707 October 1986 Requests Removal from List of Registered Users of Model GE-700 ML20210U4621986-10-0202 October 1986 Notification of Registration as User of Model 700,in Response to 860923 Request ML20206U5321986-09-23023 September 1986 Requests Registration as User of GE Model 700 ML20209D3921986-09-0404 September 1986 Forwards Rev 12 to Certificate of Compliance 5942 for Model 700 ML20203G7221986-07-23023 July 1986 Forwards Request for Info Re 860228 Application for Amend to Certificate of Compliance 5942 for Model 700.Notification of When Info Will Be Submitted Requested within 30 Days of Ltr Date ML20204G0841986-07-11011 July 1986 Forwards Rev 0 to Procedure QP 20.8, Structural Weld Insp. Procedure to Be Used to Nondestructively Examine Weld Shown on GE Drawing 183C8253 ML20203J6731986-07-0101 July 1986 Forwards Drawing 183C8253 Developed Under QA Program QAP-1, Replacing Drawing E-04-045 Submitted on 860508,in Response to .Analysis of Cask Divider Under 30-ft Drop Accident Condition Encl ML20206L6901986-06-24024 June 1986 Notification of Registration as User of Model 700 in Response to 860611 Request ML20198G6391986-05-20020 May 1986 Forwards Request for Addl Info Re 860228 & 0508 Applications for Amend to Certificate of Compliance 5942 for Model 700. Response Should Include Drawing of Fuel Basket Developed Under NRC QA Program Which Addresses Fabrication ML20198G7521986-05-0808 May 1986 Forwards Addl Info Re 860228 Application for Amend to Certificate of Compliance 5942,including Drawing E-04-045 of Cask Divider & Revs 0 to Sections R & of Radioactive Products & Svcs Operating Procedure Re Loading/Unloading ML20141G3971986-04-18018 April 1986 Forwards Rev 11 to Certificate of Compliance 5942 for Model 700 ML20203E6641986-04-17017 April 1986 Notification of Registration as User of Model 700 in Response to 860401 Request ML20141G2731986-04-17017 April 1986 Requests Addl Info Re 860228 Application for Amend to Model 700,including Engineering Drawing of Fuel Basket & Spacer.Info Should Be Submitted in Form of Revised Pages ML20203P6831986-04-10010 April 1986 Responds to NRC Questions Re Welds on Lid of Liner.Design of Part 47 Changed to Provide Retention of Valve During Hypothetical 30 Ft Drop.Encl Rev to Stress Analysis Demonstrates Functional Adequacy.W/Three Oversize Drawings ML20203P2771986-04-0101 April 1986 Requests Registration as User of Model GE-700 ML20203P3441986-04-0101 April 1986 Forwards Responses to NRC 860321 Request for Addl Info Re Drawings & Weld Dimensions.W/Three Oversize Drawings ML20203P6911986-03-31031 March 1986 Approves Placement of Drawings Submitted by 851111 & in Pdr.Ltr & Drawing Encl.W/O Encls ML20140F2311986-03-21021 March 1986 Forwards Request for Addl Info Re 851111 Application for Amend to Certificate of Compliance 5942 for Model 700.Addl Info Should Be Submitted in Form of Revised Pages.Submittal Schedule Requested within 30 Days ML20155F3001986-03-11011 March 1986 Forwards Insert Pages to Encl 3D of Application Re Certificate of Compliance 5942,per Request.Encl Pages Contain Calculations of Stresses in Welds That Secure Isolation Valve Support Plates to Liner Cover Plate ML20141N1281986-02-20020 February 1986 Notification of Registration as User of Model 700 in Response to 860212 Request ML20142A1461986-02-12012 February 1986 Requests Registration as User of Model GE-700 ML20141N2451986-01-0808 January 1986 Responds to FOIA Request for Three Categories of Documents Re MH-1A & GE-700 Spent Fuel Shipping Casks & Doe/Nrc Transportation Safety Group Meeting Minutes.Forwards App a Documents.App a & B Documents Available in PDR ML20138E5441985-12-12012 December 1985 Advises That 851111 Application for Amend to Certificate of Compliance 5942 Incomplete.Complete Engineering Drawing of Liner & Demonstration of Leak Tightness Under Accident Conditions Required.Submittal Schedule Requested in 30 Days ML20138F3221985-12-10010 December 1985 Notification of Registration as User of Model 700 in Response to 851125 Request ML20138J7281985-11-25025 November 1985 Requests Registration as User of Model 700 ML20137X1531985-11-25025 November 1985 Notification of Registration as User of Model 700,in Response to 851113 Request ML20137T4191985-11-13013 November 1985 Requests Registration as User of Model 700.QA Program Encl ML20138R3551985-11-0707 November 1985 Notification of Registration as User of Model GE-700, in Response to 851101 Request ML20136E4311985-11-0101 November 1985 Requests Registration as User of Model 700 ML20132A8681985-09-18018 September 1985 Forwards Rev 10 to Certificate of Compliance 5942 for Model 700 ML20133G2171985-09-16016 September 1985 Responds to Questions Contained in Re Amend to Certificate of Compliance 5942.Separation Provided by Placing 0.188 Inch 304 Stainless Steel Plate Between Two Baskets.Drawings & Computer Run Encl ML20209G5851985-09-0404 September 1985 Forwards Request for Addl Info Re Concerning Shipment of 20 MTR-type Fuel Assemblies in Model 700. Response Schedule Requested within 30 Days of Ltr Date. Response Should Be in Form of Revised Pages ML20129D8651985-07-12012 July 1985 Forwards Rev 9 to Certificate of Compliance 5942 for Model 700 ML20126F1531985-06-10010 June 1985 Forwards Rev 8 to Certificate of Compliance 5942 for Model GE-700 1989-04-18 Category:INCOMING CORRESPONDENCE MONTHYEARML20210D6471987-01-23023 January 1987
[Table view]Forwards Payment of Fee Re 861126 Application for Amend to Certificate of Compliance 5942 ML20210F3201987-01-10010 January 1987 Requests Review of SAR for Certificate of Compliance 5942 for GE-700 Container Re Puncture Test Analysis,Per 10CFR2.206.Use of Cask in Nonextended Mode Only Should Be Authorized Until Use in Extended Mode Complies w/10CFR71 ML20213D9271986-10-0707 October 1986 Requests Removal from List of Registered Users of Model GE-700 ML20206U5321986-09-23023 September 1986 Requests Registration as User of GE Model 700 ML20204G0841986-07-11011 July 1986 Forwards Rev 0 to Procedure QP 20.8, Structural Weld Insp. Procedure to Be Used to Nondestructively Examine Weld Shown on GE Drawing 183C8253 ML20203J6731986-07-0101 July 1986 Forwards Drawing 183C8253 Developed Under QA Program QAP-1, Replacing Drawing E-04-045 Submitted on 860508,in Response to .Analysis of Cask Divider Under 30-ft Drop Accident Condition Encl ML20198G7521986-05-0808 May 1986 Forwards Addl Info Re 860228 Application for Amend to Certificate of Compliance 5942,including Drawing E-04-045 of Cask Divider & Revs 0 to Sections R & of Radioactive Products & Svcs Operating Procedure Re Loading/Unloading ML20203P6831986-04-10010 April 1986 Responds to NRC Questions Re Welds on Lid of Liner.Design of Part 47 Changed to Provide Retention of Valve During Hypothetical 30 Ft Drop.Encl Rev to Stress Analysis Demonstrates Functional Adequacy.W/Three Oversize Drawings ML20203P3441986-04-0101 April 1986 Forwards Responses to NRC 860321 Request for Addl Info Re Drawings & Weld Dimensions.W/Three Oversize Drawings ML20203P2771986-04-0101 April 1986 Requests Registration as User of Model GE-700 ML20203P6911986-03-31031 March 1986 Approves Placement of Drawings Submitted by 851111 & in Pdr.Ltr & Drawing Encl.W/O Encls ML20155F3001986-03-11011 March 1986 Forwards Insert Pages to Encl 3D of Application Re Certificate of Compliance 5942,per Request.Encl Pages Contain Calculations of Stresses in Welds That Secure Isolation Valve Support Plates to Liner Cover Plate ML20142A1461986-02-12012 February 1986 Requests Registration as User of Model GE-700 ML20138J7281985-11-25025 November 1985 Requests Registration as User of Model 700 ML20137T4191985-11-13013 November 1985 Requests Registration as User of Model 700.QA Program Encl ML20136E4311985-11-0101 November 1985 Requests Registration as User of Model 700 ML20133G2171985-09-16016 September 1985 Responds to Questions Contained in Re Amend to Certificate of Compliance 5942.Separation Provided by Placing 0.188 Inch 304 Stainless Steel Plate Between Two Baskets.Drawings & Computer Run Encl ML20128B5991985-05-24024 May 1985 Requests Registration as User of Models GE-700 & GE-1500 ML20128E6021985-05-17017 May 1985 Requests Registration as User of Model GE-700 ML20054M7251982-06-22022 June 1982 Forwards New Certification Drawings for GE Model 700 1987-01-23 Category:VENDOR/MANUFACTURER TO NRC MONTHYEARML20210D6471987-01-23023 January 1987
[Table view]Forwards Payment of Fee Re 861126 Application for Amend to Certificate of Compliance 5942 ML20204G0841986-07-11011 July 1986 Forwards Rev 0 to Procedure QP 20.8, Structural Weld Insp. Procedure to Be Used to Nondestructively Examine Weld Shown on GE Drawing 183C8253 ML20203J6731986-07-0101 July 1986 Forwards Drawing 183C8253 Developed Under QA Program QAP-1, Replacing Drawing E-04-045 Submitted on 860508,in Response to .Analysis of Cask Divider Under 30-ft Drop Accident Condition Encl ML20198G7521986-05-0808 May 1986 Forwards Addl Info Re 860228 Application for Amend to Certificate of Compliance 5942,including Drawing E-04-045 of Cask Divider & Revs 0 to Sections R & of Radioactive Products & Svcs Operating Procedure Re Loading/Unloading ML20203P6831986-04-10010 April 1986 Responds to NRC Questions Re Welds on Lid of Liner.Design of Part 47 Changed to Provide Retention of Valve During Hypothetical 30 Ft Drop.Encl Rev to Stress Analysis Demonstrates Functional Adequacy.W/Three Oversize Drawings ML20203P3441986-04-0101 April 1986 Forwards Responses to NRC 860321 Request for Addl Info Re Drawings & Weld Dimensions.W/Three Oversize Drawings ML20203P6911986-03-31031 March 1986 Approves Placement of Drawings Submitted by 851111 & in Pdr.Ltr & Drawing Encl.W/O Encls ML20155F3001986-03-11011 March 1986 Forwards Insert Pages to Encl 3D of Application Re Certificate of Compliance 5942,per Request.Encl Pages Contain Calculations of Stresses in Welds That Secure Isolation Valve Support Plates to Liner Cover Plate ML20136E4311985-11-0101 November 1985 Requests Registration as User of Model 700 ML20133G2171985-09-16016 September 1985 Responds to Questions Contained in Re Amend to Certificate of Compliance 5942.Separation Provided by Placing 0.188 Inch 304 Stainless Steel Plate Between Two Baskets.Drawings & Computer Run Encl ML20128B5991985-05-24024 May 1985 Requests Registration as User of Models GE-700 & GE-1500 ML20128E6021985-05-17017 May 1985 Requests Registration as User of Model GE-700 ML20054M7251982-06-22022 June 1982 Forwards New Certification Drawings for GE Model 700 1987-01-23 |
Text
Retrieved from "https://kanterella.com/w/index.php?title=ML20203P691&oldid=3611825"