Letter Sequence Acceptance Review |
---|
EPID:L-2018-LLA-0080, Response to U. S. Nuclear Regulatory Commission Request for Additional Information Regarding Proposed Change to Technical Specification 3/4.7.4 for Ultimate Heat Sink Design Basis Update (Approved, Closed) |
|
|
|
---|
Category:Acceptance Review Letter
MONTHYEARML19059A1782019-02-28028 February 2019 Acceptance Review Results for Relief Request No. EN-19-RR-1 to Use ASME Code Case N-831-1 for Entergy Fleet ML18155A2832018-06-0707 June 2018 Acceptance of Requested Licensing Action Revision of Technical Specification 3/4.7.4, Ultimate Heat Sink ML13282A3082013-10-0909 October 2013 Acceptance Review Email, Request for Alternative W3-ISI-023, ASME Code Case N-770-1 Successive Examinations, Third 10-Year Inservice Inspection Interval ML12311A1342012-11-0505 November 2012 Entergy Fleet and ISFSI-Acceptance Review Email, Direct License Transfer and Conforming Amendments for Arkansas Nuclear Units 1 & 2; Grand Gulf Unit 1, and Grand Gulf Early Site Permit; Indirect License Transfer for River Bend and Waterford ML1203401282012-02-0303 February 2012 Acceptance Review Email, License Amendment Request to Adopt NFPA 805, Performance-Based Standard for Fire Protection for Light Water Reactor Generating Plants, 2001 Edition ML1202607432012-01-26026 January 2012 ANO 1 & 2, Big Rock, FitzPatrick, GGNS, Indian Point 1, 2, and 3, Palisades, Pilgrim, RBS, Vermont Yankee, and Waterford - Acceptance Review Email, Amendment to Revise Quality Assurance Program Manual and Staff Qualification Technical Speci ML1202303452012-01-23023 January 2012 Acceptance Review Following Supplement Email, License Amendment Request to Revise Technical Specification 3/4.7.4 Table 3.7-3, Ultimate Heat Sink Minimum Fan Requirements Per Train ML1125003802011-09-0707 September 2011 Acceptance Review E-mail, License Amendment Request, Revise Technical Specifications Related to Steam Generator Tube Integrity to Support Replacement of Steam Generators ML1113707352011-05-17017 May 2011 Acceptance Review Email, License Amendment Request, Revise Technical Specification Applicability and Action Language for Revised Fuel Handling Accident Analysis ML1108310032011-03-24024 March 2011 Acceptance Review Email, Request for Alternative W3-1SI-018, Inspection of Reactor Pressure Vessel Head Control Element Drive Mechanism Nozzles During the Third Ten-Year Inservice Inspection Interval ML1027002292010-09-27027 September 2010 Acceptance Review E-mail, Request to Implement Emergency Action Level Schemes Based on NEI 99-01, Rev 5 ML1023001412010-08-18018 August 2010 Acceptance Review Email, License Amendment Request, Revise TS 3.7.1.2, Emergency Feedwater System, Limiting Condition for Operation to Clarify Acceptability of Transitioning from Mode 4 to Mode 3 ML1020902322010-07-28028 July 2010 Acceptance Review Email, License Amendment Request for Approval of Cyber Security Plan ML1013105982010-05-20020 May 2010 License Amendment Request for Approval of the Cyber Security Plan ML1009707752010-04-0707 April 2010 Acceptance Review E-mail, License Amendment Request, Modify Technical Specification 3/4.9.4, Containment Building Penetrations, to Allow Alternative Means of Penetration Closure During Refueling Operations ML1009707482010-04-0707 April 2010 Acceptance Review E-mail, License Amendment Request, Delete Operating License Condition 2.C.14, Fuel Movement in the Fuel Handling Building ML1008205662010-03-23023 March 2010 Acceptance Review Email, License Amendment Request to Revise Technical Specification Table 3.4-1 to Add Shutdown Cooling Suction Bypass Isolation Valves ML1006404132010-03-0505 March 2010 Acceptance Review Email, Relief Request No. W3-ISI-017, Alternative to ASME IWA-5211 Regarding Chemical Volume Control System Pipe Visual Inspection ML1006103162010-03-0202 March 2010 Acceptance Review Email, Request for Exemption from 10 CFR Part 73 Physical Security Requirements ML0930202372009-10-29029 October 2009 Acceptance Review Email Relief Request W3-ISI-016 ML0930202322009-10-29029 October 2009 Acceptance Review Email Relief Request W3-ISI-015 ML0917302342009-06-22022 June 2009 Acceptance Review Email, License Amendment Request, Revise Technical Specification 2.1.1.1 Departure from Nucleate Boiling Ratio (DNBR) Safety Limit ML0916602952009-06-15015 June 2009 Acceptance Review Email, Requests for Relief from ASME Section XI Volumetric Examination Requirements - Second 10-Year ISI Interval ML0916301512009-06-12012 June 2009 Acceptance Review Email, License Amendment Request, Revise Technical Specification 6.9.1.11, Core Operating Limits Report to Add New Analytical Methods to Support Implementation of Westinghouse Next Generation Fuel ML0913200592009-05-12012 May 2009 Entergy - Acceptance Review for License Amendment Request (TAC Nos. ME1198 - ME1207) ML0833805732008-12-0303 December 2008 E-mail Waterford Steam Electric Station, Unit 3 - Acceptance Review Email to Modify TS Section 3/4.9.6, Refueling Machine ML0833701732008-12-0202 December 2008 Acceptance Review Email ML0831808522008-11-0505 November 2008 Acceptance Review Email ML0829704262008-10-23023 October 2008 Acceptance Review E-Mail of LAR NPF-38-279 ML0829403772008-10-20020 October 2008 Acceptance Review Email of Requested Licensing Action Proposed Alternative Request, W3-ISI-006 ML0829102062008-10-16016 October 2008 Acceptance Review Request ML0829101572008-10-15015 October 2008 Acceptance Review Email ML0820010842008-07-25025 July 2008 River Bend Station, and Waterford Steam Electric Station, Unit 3 - Acceptance Review, Relief Request No. CEP-ISI-011 for 10-Year Inservice Testing Interval (TAC MD8826, MD8827, MD8828, & MD8829) 2019-02-28
[Table view] |
Text
UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 June 7, 2018 Site Vice President Entergy Operations, Inc.
Waterford Steam Electric Station, Unit 3 17265 River Road Killona, LA 70057-3093
SUBJECT:
WATERFORD STEAM ELECTRIC STATION, UNIT 3-ACCEPTANCE OF REQUESTED LICENSING ACTION RE: REVISION OF TECHNICAL SPECIFICATION 3/4.7.4, "ULTIMATE HEAT SINK" (EPID L-2018-LLA-0080)
Dear Sir or Madam:
By letter dated March 26, 2018 (Agencywide Documents Access and Management System (ADAMS) Accession No. ML180856196), as supplemented by letter dated May 17, 2018 (ADAMS Accession No. ML18137A494), Entergy Operations, Inc. (Entergy, the licensee),
submitted a license amendment request (LAR) for Waterford Steam Electric Station, Unit 3 (Waterford 3). The proposed amendment would revise Waterford 3 Technical Specification (TS)
Section 3/4.7.4, "Ultimate Heat Sink."
The purpose of this letter is to provide the results of the U.S. Nuclear Regulatory Commission (NRC) staff's acceptance review of this LAR. The acceptance review was performed to determine if there is sufficient technical information in scope and depth to allow the NRC staff to complete its detailed technical review. The acceptance review is also intended to identify whether the application has any readily apparent information insufficiencies in its characterization of the regulatory requirements or the licensing basis of the plant.
Consistent with Section 50.90 of Title 10 of the Code of Federal Regulations (10 CFR), an amendment to the license (including the TSs) must fully describe the changes requested, and following as far as applicable, the form prescribed for original applications. Section 50.34 of 10 CFR addresses the content of technical information required. This section stipulates that the submittal address the design and operating characteristics, unusual or novel design features, and principal safety considerations.
The NRC staff has reviewed your submittals listed above and concluded that they provide technical information in sufficient detail to enable the NRC staff to complete its detailed technical review and make an independent assessment regarding the acceptability of the proposed amendment in terms of regulatory requirements and the protection of public health and safety and the environment. Given the lesser scope and depth of the acceptance review as compared to the detailed technical review, there may be instances in which issues that impact the NRC staff's ability to complete the detailed technical review are identified despite completion of an adequate acceptance review. You will be advised of any further information needed to support the NRC staff's detailed technical review by separate correspondence.
Based on the information provided in your submittal dated March 26, 2018, discussions during a clarification call with Ms. Maria Zamber of your staff on May 3, 2018, and the information provided in your submittal dated May 17, 2018, the NRC staff has estimated that this licensing request will take approximately 800 hours33.333 days <br />4.762 weeks <br />1.096 months <br /> to complete. The NRC staff expects to complete this review in approximately 12 months, which is June 6, 2019. If there are emergent complexities or challenges in our review that would cause changes to the initial forecasted completion date or significant changes in the forecasted hours, the reasons for the changes, along with the new estimates, will be communicated during the routine interactions with the assigned project manager.
These estimates are based on the NRC staff's initial review of the application and they could change, due to several factors including requests for additional information, unanticipated addition of scope to the review, and review by NRC advisory committees or hearing-related activities.
If you have any questions, please contact me at 301-415-1390 or via e-mail at April.Pulvirenti@nrc.gov.
Sincerely, April L. Pulvirenti, Project Manager Plant Licensing Branch IV Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-382 cc: Listserv
ML18155A283 OFFICE NRR/D0RL/LPL4/PM NRR/D0RL/LPL4/LA NRR/DORL/LPL4/BC NRR/DORL/LPL4/PM NAME APulvirenti PBlechman RPascarelli APulvirenti DATE 6/6/18 6/4/18 6/7/18 6/7/18