ML12221A329
| ML12221A329 | |
| Person / Time | |
|---|---|
| Site: | Watts Bar  |
| Issue date: | 12/31/2010 |
| From: | City of Dayton, TN, Water Department |
| To: | Justin Poole Watts Bar Special Projects Branch |
| Poole J | |
| References | |
| TN0000174 | |
| Download: ML12221A329 (6) | |
Text
annual Water Report Water testing performed in 2010 Quality Presented By City of Dayton Water Department PWS ID#: TN0000174
Quality First Quality Substances That Could Be in Water O First nce again we are proud to present our annual water quality report covering all testing performed between January 1 and December 31, 2010. As in years past, we are committed to delivering the best-quality I n order to ensure that tap water is safe to drink, the U.S. EPA and the Tennessee Department of Environment and Conservation prescribe regulations drinking water possible. To that end, we remain vigilant which limit the amount of certain contaminants in in meeting the challenges of new regulations, source water provided by public water systems. U.S. Food water protection, water conservation, and community and Drug Administration regulations establish limits outreach and education while continuing to serve the for contaminants in bottled water, which must provide needs of all of our water users. Thank you for allowing us the same protection for public health. Drinking to continue providing you and your family with quality water, including bottled water, may reasonably be drinking water. expected to contain at least small amounts of some contaminants. The presence of these contaminants We encourage you to share your thoughts with us on the does not necessarily indicate that the water poses a information contained in this report. Should you ever health risk.
have any questions or concerns, we are always available to assist you. The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals, in some cases radioactive Community Participation material, and substances resulting from the presence Y ou are welcome and encouraged to participate and of animals or from human activity. Substances that voice your concerns about your drinking water by may be present in source water include:
attending Dayton city council meetings on the first Microbial Contaminants, such as viruses and bacteria, Monday of each month at approximately 6:00 p.m. (or which may come from sewage treatment plants, septic 5 minutes after the school board meeting) in the City systems, agricultural livestock operations, or wildlife; Council Chambers at the Dayton Municipal Building located at 399 First Avenue. Inorganic Contaminants, such as salts and metals, which can be naturally occurring or may result from urban stormwater runoff, industrial or domestic Important Health Information wastewater discharges, oil and gas production, mining, or farming; S ome people may be more vulnerable to contaminants in drinking water than the general population.
Immunocompromised persons such as persons with Pesticides and Herbicides, which may come from a variety of sources, such as agriculture, urban cancer undergoing chemotherapy, persons who have stormwater runoff, and residential uses; undergone organ transplants, people with HIV/AIDS or Organic Chemical Contaminants, including other immune system disorders, some elderly, and infants synthetic and volatile organic chemicals, which are may be particularly at risk from infections. These by-products of industrial processes and petroleum people should seek advice about drinking water production and may also come from gas stations, from their health care providers. The urban stormwater runoff, and septic systems; U.S. EPA/CDC (Centers for Disease Control and Prevention) guidelines on Radioactive Contaminants, which can be naturally appropriate means to lessen the risk of occurring or may be the result of oil and gas infection by Cryptosporidium and other production and mining activities.
microbial contaminants are available For more information about contaminants and from the Safe Drinking Water Hotline potential health effects, call the U.S. EPAs Safe at (800) 426-4791 or http:// Drinking Water Hotline at (800) 426-4791.
water.epa.gov/drink/hotline.
Tap vs. Bottled Where Does My Water Come From?
T hanks in part to aggressive marketing, the bottled water industry has successfully convinced us all that water purchased in bottles is a healthier alternative to tap T he City of Dayton Water System relies on surface water from the Tennessee River. The river pump station is located on the Chickamauga Lake Reservoir. To water. However, according to a four-year study conducted learn more about our lakes and watershed on the Internet, by the Natural Resources Defense Council, bottled water go to the U.S. EPAs Surf Your Watershed at www.epa.
is not necessarily cleaner or safer than most tap water. gov/surf.
In fact, about 25 percent of bottled water is actually just The water plant treats your water using disinfection and bottled tap water (40 percent according to government filtration to remove or reduce harmful contaminants that estimates).
may come from the source water. The raw water is treated The Food and Drug Administration is responsible for as follows: alum, caustic soda, sodium permanganate, and regulating bottled water, but these rules allow for less sodium hypochlorite (bleach for disinfection) are added to rigorous testing and purity standards than those required the raw water. These chemicals react with smaller particles by the U.S. EPA for community tap water. For instance, in the water to form larger particles called floc. The floc the high mineral content of some bottled waters makes then settles out in the sedimentation basins before the them unsuitable for babies and young children. Further, water passes through the filters. After the filtering process, the FDA completely exempts bottled water thats packaged more hypochlorite is added along with fluoride and and sold within the same state, which accounts for about sodium phosphate (a corrosion inhibitor). The Dayton 70 percent of all bottled water sold in the United States. Water Treatment Plant treated more than 950 million gallons of water to serve a population of approximately People spend 10,000 times more per gallon for bottled 20,500 people in 2010.
water than they typically do for tap water. If you get your recommended eight glasses a day from bottled water, you could spend up to $1,400 annually. The same amount of tap water would cost about 49 cents. Even if you installed Source Water Assessment a filter device on your tap, your annual expenditure would be far less than what youd pay for bottled water. T he Tennessee Association of Utility Districts (TAUD) has conducted a source water assessment for the public water systems in the State of Tennessee. The goal For a detailed discussion on the NRDC study results, of the assessment was to determine the water systems check out their Web site at www.nrdc.org/water/drinking/
vulnerabilities to possible source water contamination.
bw/exesum.asp.
The assessment determined that our surface water source (the Tennessee River) is most vulnerable to historic and Billing Information present-day land-use activities, including agriculture, light industry, and commercial transportation along the railroad B udget Billing - Budget billing begins in October of each year and ends in September. You must have been at a current residence for at least one (1) year. Please and highway routes. A copy of the assessment is available for viewing at the City of Dayton Water Department or the City of Dayton Water Treatment Plant, or visit the water see the Service Department at the Billing office for more plants Web page at daytontn.net.
information or call (423) 775-8416.
Deposits are applied as a credit to your account after two (2) years if your account is in good standing. If you move out of our service area before two (2) years of service, Questions?
you may pick up your deposit refund after paying your For more information about this report, or for any final bill. questions relating to your drinking water, please contact the City of Dayton Water Department Warm Neighbors - Customers have the option to sign at (423) 775-1818 or the Water Treatment Plant up for a $1.00 donation on their utility bill. This fund is by calling (423) 775-8415 or by writing to this for those in need of help on their utility bills. This fund address: PO Box 226, Dayton, Tennessee, 37321.
is handled through We Care.
Why do I get this report each year?
Community water system operators are required by federal law to provide their customers with an annual water quality report. The report helps people make informed choices about the water they drink. It lets people know what contaminants, if any, are in their drinking water and how these contaminants may affect their health. It also gives the system operators a chance to tell customers what it takes to deliver safe drinking water.
Why does my water sometimes look milky?
The milky look is caused by tiny air bubbles in the water. The water in the pipes coming into your home or business is under pressure, so gasses (the air) are dissolved and trapped in the pressurized water as it flows into your glass. As the air bubbles rise in the glass, they break free at the surface, thus clearing up the water.
Although the milky appearance might be disconcerting, the air bubbles wont affect the quality or taste of the water.
How can I keep my pets water bowl germ free?
Veterinarians generally recommend that water bowls be washed daily with warm, soapy water - normally when you change the water. Scour the corners, nooks, and crannies of the water dish using a small scrub brush. In addition, once a week put water bowls into the dishwasher to sanitize them with hot water. In most situations, disinfectants like bleach are not needed; warm, soapy water is all you need to keep your pets water clean and safe.
How much water is used during a typical shower?
The Federal Energy Policy Act set a nationwide regulation that limits showerheads to a maximum flow of 2.5 gallons per minute (GPM). Showerheads made before 1980 are rated at 5 GPM. Since the average shower is estimated to last 8.2 minutes, the old showerheads use 41 gallons of water while the newer, low-flow showerheads use only about 21 gallons.
Is it okay to use hot water from the tap for cooking and drinking?
No, always use cold water. Hot water is more likely to contain rust, copper, and lead from household plumbing and water heaters. These substances can dissolve into hot water faster than they do into cold water, especially when the faucet has not been used for an extended period of time.
How many contaminants are regulated in drinking water?
The U.S. EPA regulates over 80 contaminants in drinking water. Some states may choose to regulate additional contaminants or to set stricter standards, but all states must have standards at least as stringent as the U.S. EPAs.
Lead and Drinking Water I f present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is Water Quality Parameters for 2010 (average daily test results) primarily from materials and components associated Dayton Water Plant with service lines and home plumbing. The City of Dayton Water System is responsible for providing Substance (unit of Avg./
high-quality drinking water but cannot control the Units Range measure) Day variety of materials used in plumbing components.
When your water has been sitting for several hours, Alkalinity mg/l 54 30 - 68 you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes Hardness mg/l 69 36 - 84 before using water for drinking or cooking. If you pH SU 7.2 6.8 - 7.7 are concerned about lead in your water, you may wish to have your water tested. Information on lead Temperature C 17.8 5.0 - 29.0 in drinking water, testing methods, and steps you can take to minimize exposure is available from the Raw Turbidity NTU 4.6 1.5 - 27.1 Safe Drinking Water Hotline or at www.epa.gov/
safewater/lead.
About Our Violation A s a result of an administrative oversight in October 2010, we neglected to submit a summary report for Cryptosporidium results as required by the National Primary Drinking Water Regulations. At no time did this incident pose a threat to public health and safety, nor did it have any impact on the high-quality drinking water provided to our customers.
Upon notice, the requirement was promptly met.
What Are PPCPs?
W hen cleaning out your medicine cabinet, what do you do with your expired pills?
Many people flush them down the toilet or toss them into the trash. Although this seems convenient, these actions could threaten our water supply.
Recent studies are generating a growing concern over pharmaceuticals and personal care products (PPCPs) entering water supplies. PPCPs include human and veterinary drugs (prescription or over-the-counter) and consumer products, such as cosmetics, fragrances, lotions, sunscreens, and house cleaning products. Over the past five years, the number of U.S. prescriptions increased 12 percent to a record 3.7 billion, while nonprescription drug purchases held steady around 3.3 billion. Many of these drugs and personal care products do not biodegrade and may persist in the environment for years.
The best and most cost-effective way to ensure safe water at the tap is to keep our source waters clean. Never flush unused medications down the toilet or sink. Instead, check to see if the pharmacy where you made your purchase accepts medications for disposal, or contact your local health department for information on proper disposal methods and drop-off locations. You can also go on the Web at www.Earth911.com to find more information about disposal locations in your area.
Sampling Results Definitions D uring the past year, we have taken hundreds of water samples in order to determine the presence of any radioactive, biological, inorganic, volatile organic, or synthetic organic contaminants. The table below shows only those contaminants that were detected in the water. The state requires us to monitor for certain substances less than once per year because the concentrations of these substances do AL (Action Level): The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.
not change frequently. In these cases, the most recent sample data are included, along with the year in which the sample was taken.
MCL (Maximum Contaminant Level):
Regulated Substances The highest level of a contaminant that is allowed in drinking water. MCLs are set as Substance Year MCL MCLG Amount Range (Unit of Measure) Sampled [MRDL] [MRDLG] Detected Low-High Violation Typical Source close to the MCLGs as feasible using the best available treatment technology.
Chlorine (ppm) 2010 [4] [4] 2.3 2.0-2.9 No Water additive used to control microbes MCLG (Maximum Contaminant Level Fluoride (ppm) 2010 4 4 1.03 0.23-1.41 No Erosion of natural deposits; Water additive Goal): The level of a contaminant in which promotes strong teeth; Discharge drinking water below which there is no from fertilizer and aluminum factories known or expected risk to health. MCLGs Haloacetic Acids [HAA] (ppb) 2010 60 NA 26.8 16.5-45.4 No By-product of drinking water disinfection allow for a margin of safety.
Nitrate (ppm) 2010 10 10 0.46 0.46-0.46 No Runoff from fertilizer use; Leaching from MRDL (Maximum Residual Disinfectant septic tanks, sewage; Erosion of natural Level): The highest level of a disinfectant deposits allowed in drinking water. There is convincing TTHMs [Total 2010 80 NA 29.8 10.9-56.4 No By-product of drinking water disinfection evidence that addition of a disinfectant Trihalomethanes] (ppb) is necessary for control of microbial contaminants.
Total Organic Carbon (ppm) 2010 TT NA 1.45 1.28-1.60 No Naturally present in the environment MRDLG (Maximum Residual Turbidity (NTU) 1 2010 TT=1 NA 0.28 0.04-0.28 No Soil runoff Disinfectant Level Goal): The level of a Turbidity (Lowest monthly 2010 TT=95% of NA 100.0 NA No Soil runoff drinking water disinfectant below which percent of samples meeting limit) samples<0.3 NTU there is no known or expected risk to health. MRDLGs do not reflect the Tap water samples were collected for lead and copper analyses from sample sites throughout the community benefits of the use of disinfectants to control microbial contaminants.
Amount Sites Above Substance Year Detected AL/Total NA: Not applicable.
(Unit of Measure) Sampled AL MCLG (90th%tile) Sites Violation Typical Source Copper (ppm) 2008 1.3 1.3 1.2 3/30 No Corrosion of household plumbing systems; Erosion of natural NTU (Nephelometric Turbidity deposits; Leaching from wood preservatives Units): Measurement of the clarity, or turbidity, of water. Turbidity in Lead (ppb) 2008 15 0 10 0/30 No Corrosion of household plumbing systems; Erosion of natural excess of 5 NTU is just noticeable deposits to the average person.
ppb (parts per billion): One 1
Turbidity is a measure of the cloudiness of the water. It is monitored because it is a good indicator of the effectiveness of the filtration system. part substance per billion parts water (or micrograms per liter).
ppm (parts per million):
One part substance per million parts water (or milligrams per liter).
TT (Treatment Technique): A required process intended to reduce the level of a contaminant in drinking water.