RS-17-137, Application to Revise Technical Specifications to Adopt TSTF-551, Revise Secondary Containment Surveillance Requirements
ML17312A364 | |
Person / Time | |
---|---|
Site: | Dresden, Nine Mile Point, Limerick, Clinton, Quad Cities, LaSalle ![]() |
Issue date: | 11/08/2017 |
From: | Simpson P R Exelon Generation Co |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
RS-17-137 | |
Download: ML17312A364 (31) | |
Text
4300 Winfield Road Warrenville, IL 60555 630 657 2000 Office RS-17-137 10 CFR 50.90 November 8, 2017
U.S. Nuclear Regulatory Commission
ATTN: Document Control Desk Washington, DC 20555-0001
Clinton Power Station, Unit 1 Facility Operating License No. NPF-62 NRC Docket No. 50-461 Dresden Nuclear Power Station, Units 2 and 3 Renewed Facility Operating License Nos. DPR-19 and DPR-25 NRC Docket Nos. 50-237 and 50-249
LaSalle County Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-11 and NPF-18 NRC Docket Nos. 50-373 and 50-374
Limerick Generating Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-39 and NPF-85 NRC Docket Nos. 50-352 and 50-353
Nine Mile Point Nuclear Station, Unit 2 Renewed Facility Operating License No. NPF-69 NRC Docket No. 50-410 Quad Cities Nuclear Power Station, Units 1 and 2 Renewed Facility Operating License Nos. DPR-29 and DPR-30 NRC Docket Nos. 50-254 and 50-265
Subject:
Application to Revise Technical Specifications to Adopt TSTF-551, "Revise Secondary Containment Surveillance Requirements"
Reference:
Letter from J. M. Whitman (U.S. NRC) to Technical Specifications Task Force, "Final Safety Evaluation of Technical Specifications Task Force Traveler
TSTF-551, Revision 3, 'Revise Secondary Containment Surveillance Requirements' (CAC No. MF5125)," dated September 21, 2017
In accordance with 10 CFR 50.90, "Application for amendment of license, construction permit, or early site permit," Exelon Generation Company, LLC (EGC), requests an amendment to Facility Operating License No. NPF-62 for Clinton Power Station, Unit 1, Renewed Facility
November 8, 2017 U.S. Nuclear Regulatory Commission Page 3 cc: NRC Regional Administrator, Region I NRC Regional Administrator, Region III NRC Senior Resident Inspector - Clinton Power Station NRC Senior Resident Inspector - Dresden Nuclear Power Station NRC Senior Resident Inspector - LaSalle County Station NRC Senior Resident Inspector - Limerick Generating Station NRC Senior Resident Inspector - Nine Mile Point Nuclear Station NRC Senior Resident Inspector - Quad Cities Nuclear Power Station Illinois Emergency Management Agency - Division of Nuclear Safety Director, Bureau of Radiation Protection - Pennsylvania Department of Environmental Protection A. L. Peterson, NYSERDA ATTACHMENT 1 Description and Assessment Page 1
1.0 DESCRIPTION
The proposed change revises Technical Specifications (TS) Surveillance Requirements (SRs) to address conditions during which the secondary containment pressure may not meet the SR pressure requirements. In addition, for Limerick Generating Station, associated TS definitions are revised for consistency to reflect the changes proposed to the SRs. 2.0 ASSESSMENT 2.1 Applicability of Published Safety Evaluation Exelon Generation Company, LLC (EGC) has reviewed the safety evaluation for TSTF-551 provided to the Technical Specifications Task Force in a letter dated September 21, 2017. This review included a review of the NRC's evaluation, as well as the information provided in TSTF-551. EGC has concluded that the justifications presented in TSTF-551 and the safety evaluation prepared by the NRC are applicable to Clinton Power Station (CPS) Unit 1, Dresden Nuclear Power Station (DNPS) Units 2 and 3, LaSalle County Station (LSCS) Units 1 and 2, Limerick Generating Station (LGS) Units 1 and 2, Nine Mile Point Nuclear Station (NMP) Unit 2, and Quad Cities Nuclear Power Station (QCNPS) Units 1 and 2, and justify this amendment for the incorporation of the changes to the stations' TS. 2.2 Optional Changes and Variations EGC is proposing the following variations from the TS changes described in the TSTF-551 or the applicable parts of the NRC's safety evaluation. These variations do not affect the applicability of TSTF-551 or the NRC's safety evaluation to the proposed license amendment. The CPS Unit 1, DNPS Units 2 and 3, LSCS Units 1 and 2, LGS Units 1 and 2, NMP Unit 2, and QCNPS Units 1 and 2 TS already contain an allowance similar to that made to the Improved Standard Technical Specifications (ISTS) SR 3.6.4.1.3 regarding use of the access opening for entry and exit. Therefore, the proposed change does not contain this portion of TSTF-551. TSTF-551 includes an editorial change to ISTS SR 3.6.4.1.4 that revises the wording from "-standby gas treatment (SGT) subsystem" to "SGT subsystem." The corresponding SR for DNPS and QCNPS (i.e., SR 3.6.4.1.3) already uses the TSTF-551 wording; therefore, no changes are proposed to SR 3.6.4.1.3 for DNPS and QCNPS. The LGS TS utilize different numbering and titles than the Improved Standard Technical Specifications on which TSTF-551 was based. Specifically, ISTS TS 3.6.4.1, "Secondary Containment," on which TSTF-551 is based, is applicable during Modes 1, 2 and 3, during movement of recently irradiated fuel assemblies in the secondary containment, and during operations with the potential for draining the reactor vessel (OPDRVs). ISTS SR 3.6.4.1.1, which is being modified by the addition of a Note in TSTF-551, requires verifying that secondary containment vacuum is > [0.25] inch of vacuum water gauge. This SR is applicable to all the modes of applicability.
ATTACHMENT 1 Description and Assessment Page 2 For LGS, the corresponding TS Section 3.6.5, "Secondary Containment," which covers all the modes of applicability of ISTS TS 3.6.4.1, is split between two separate TS sections. LGS TS 3.6.5.1.1 applies to Reactor Enclosure Secondary Containment Integrity during Operational Conditions (OPCONs) 1, 2 and 3, and TS 3.6.5.1.2 applies to Refueling Area Secondary Containment Integrity when recently irradiated fuel is being handled in the secondary containment, or during operations with a potential for draining the reactor vessel, with the vessel head removed and fuel in the vessel. SRs 4.6.5.1.1.a and 4.6.5.1.2.a require verification that the pressure within each area of secondary containment (i.e., the reactor enclosure and the refuel floor, respectively) is > 0.25 inch of vacuum water gauge, which is consistent with ISTS SR 3.6.4.1.1. In addition, LGS also has two separate TS definitions related to Reactor Enclosure Secondary Containment Integrity and Refueling Floor Secondary Containment Integrity (i.e., TS 1.33 and 1.36, respectively). The definition TS are being revised for consistency to reflect the changes proposed to SRs 4.6.5.1.1.a and 4.6.5.1.2.a, as applicable. The differences described above are administrative in nature and do not affect the applicability of TSTF-551 to the CPS, DNPS, LSCS, LGS, NMP, and QCNPS TS.
3.0 REGULATORY ANALYSIS
3.1 No Significant Hazards Consideration Determination Analysis Exelon Generation Company, LLC (EGC) requests adoption of TSTF-551, "Revise Secondary Containment Surveillance Requirements," which is an approved change to the Standard Technical Specifications (STS), into the Clinton Power Station (CPS) Unit 1, Dresden Nuclear Power Station (DNPS) Units 2 and 3, LaSalle County Station (LSCS) Units 1 and 2, Limerick Generating Station (LGS) Units 1 and 2, Nine Mile Point Nuclear Station (NMP) Unit 2, and Quad Cities Nuclear Power Station (QCNPS) Units 1 and 2, Technical Specifications (TS). The proposed change revises TS Surveillance Requirement (SR) 3.6.4.1.1 for CPS, DNPS, LSCS, NMP, and QCNPS. For LGS, the proposed change revises TS 3.6.5.1.1, "Reactor Enclosure Secondary Containment Integrity," SR 4.6.5.1.1.a, and TS 3.6.5.1.2, "Refueling Area Secondary Containment Integrity," SR 4.6.5.1.2.a. In addition, LGS TS Definitions 1.33, "Reactor Enclosure Secondary Containment Integrity," and 1.36, "Refueling Floor Secondary Containment Integrity," are revised for consistency to reflect the changes proposed to the TS Section 3.6.5 SRs, as applicable. The SRs are revised to permit conditions during which the secondary containment may not meet the SR acceptance criterion for a period of up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that one standby gas treatment (SGT) subsystem remains capable of establishing the required secondary containment vacuum. EGC has evaluated the proposed change against the criteria of 10 CFR 50.92(c) to determine if the proposed change results in any significant hazards. The following is the evaluation of each of the 10 CFR 50.92(c) criteria:
ATTACHMENT 1 Description and Assessment Page 3 1. Does the proposed change involve a significant increase in the probability or consequences of an accident previously evaluated? Response: No The proposed change addresses conditions during which the secondary containment SRs are not met. The secondary containment is not an initiator of any accident previously evaluated. As a result, the probability of any accident previously evaluated is not increased. The consequences of an accident previously evaluated while utilizing the proposed changes are no different than the consequences of an accident while utilizing the existing four-hour Completion Time (i.e., allowed outage time) for an inoperable secondary containment. In addition, the proposed change provides an alternative means to ensure the secondary containment safety function is met. As a result, the
consequences of an accident previously evaluated are not significantly increased. Therefore, the proposed change does not involve a significant increase in the probability or consequences of an accident previously evaluated. 2. Does the proposed change create the possibility of a new or different kind of accident from any previously evaluated? Response: No The proposed change does not alter the protection system design, create new failure modes, or change any modes of operation. The proposed change does not involve a physical alteration of the plant; and no new or different kind of equipment will be installed. Consequently, there are no new initiators that could result in a new or different kind of accident. Therefore, the proposed change does not create the possibility of a new or different kind of accident from any previously evaluated. 3. Does the proposed change involve a significant reduction in a margin of safety? Response: No The proposed change addresses conditions during which the secondary containment SRs are not met. Conditions in which the secondary containment vacuum is less than the required vacuum are acceptable provided the conditions do not affect the ability of the SGT System to establish the required secondary containment vacuum under post-accident conditions within the time assumed in the accident analysis. This condition is incorporated in the proposed change by requiring an analysis of actual environmental and secondary containment pressure conditions to confirm the capability of the SGT System is maintained within the assumptions of the accident analysis. Therefore, the safety function of the secondary containment is not affected. Therefore, the proposed change does not involve a significant reduction in a margin of safety.
ATTACHMENT 1 Description and Assessment Page 4 Based on the above, EGC concludes that the proposed amendment presents no significant hazards consideration under the standards set forth in 10 CFR 50.92(c), and, accordingly, a finding of "no significant hazards consideration" is justified.
3.2 Conclusions In conclusion, based on the considerations discussed above, (1) there is reasonable assurance that the health and safety of the public will not be endangered by operation in the proposed manner, (2) such activities will be conducted in compliance with the Commission's regulations, and (3) the issuance of the amendment will not be inimical to the common defense and security or to the health and safety of the public. 4.0 ENVIRONMENTAL EVALUATION The proposed amendment would change a requirement with respect to installation or use of a facility component located within the restricted area, as defined in 10 CFR 20, or would change an inspection or surveillance requirement.
However, the proposed amendment does not involve (i) a significant hazards consideration, (ii) a significant change in the types or significant increase in the amounts of any effluents that may be released offsite, or (iii) a significant increase in individual or cumulative occupational radiation exposure. Accordingly, the proposed amendment meets the eligibility criterion for categorical exclusion set forth in 10 CFR 51.22(c)(9). Therefore, pursuant to 10 CFR 51.22(b), no environmental impact statement or environmental assessment need be prepared in connection with the proposed amendment.
ATTACHMENT 2 Markup of Proposed Technical Specifications Pages Clinton Power Station, Unit 1 Facility Operating License No. NPF-62 Dresden Nuclear Power Station, Units 2 and 3 Renewed Facility Operating License Nos. DPR-19 and DPR-25 LaSalle County Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-11 and NPF-18 Limerick Generating Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-39 and NPF-85 Nine Mile Point Nuclear Station, Unit 2 Renewed Facility Operating License No. NPF-69 Quad Cities Nuclear Power Station, Units 1 and 2 Renewed Facility Operating License Nos. DPR-29 and DPR-30 REVISED TECHNICAL SPECIFICATIONS PAGES Clinton Power Station, Unit 1 3.6-44 3.6-45 Limerick Generating Station, Unit 1 1-6 1-7 3/4 6-46 3/4 6-47
Quad Cities Nuclear Power Station, Units 1 and 2 3.6.4.1-2 Dresden Nuclear Power Station, Units 2 and 3 3.6.4.1-2
Limerick Generating Station, Unit 2 1-6 1-7 3/4 6-46 3/4 6-47 LaSalle County Station, Units 1 and 2 3.6.4.1-3
Nine Mile Point Nuclear Station, Unit 2 3.6.4.1-2
3.6.4.1-3
Secondary Containment 3.6.4.1CLINTON3.6-44Amendment No. 192 ACTIONS (continued)CONDITIONREQUIRED ACTIONCOMPLETION TIMEC.Secondary containment inoperable during
movement of recently
irradiated fuel
assemblies in the
primary or secondary
containment, or during
OPDRVs.C.1--------NOTE---------
LCO 3.0.3 is not
applicable.
Suspend movement of recently irradiated
fuel assemblies in the
primary and secondary
containment.
ANDC.2Initiate action to suspend OPDRVs.
Immediately Immediately SURVEILLANCE REQUIREMENTSSURVEILLANCEFREQUENCYSR 3.6.4.1.1Verify secondary containment vacuum is
!0.25 inch of vacuum water gauge.
In accordance with the Surveillance Frequency Control Program SR 3.6.4.1.2Verify all secondary containment equipment hatches are closed and sealed.
In accordance with the Surveillance Frequency Control Program (continued)
NOTE--------------------------------------
Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates
one standby gas treatment (SGT) subsystem is capable of
establishing the required secondary containment vacuum.
Secondary Containment 3.6.4.1CLINTON3.6-45AmendmentNo. 192 SURVEILLANCE REQUIREMENTS (continued)SURVEILLANCEFREQUENCYSR 3.6.4.1.3Verify one door in each access to secondary containment is closed, except
during normal entry and exit.
In accordance with the Surveillance Frequency Control Program SR 3.6.4.1.4Verify the secondary containment can be drawn down to
!0.25 inch of vacuum water gauge within the time required using one
Standby Gas Treatment (SGT) subsystem.
In accordance with the Surveillance Frequency Control Program SR 3.6.4.1.5Verify the secondary containment can be maintained
!0.25 inch of vacuum water gauge for 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> using one SGT subsystem at a flow rate 4400 cfm.In accordance with the Surveillance Frequency Control Program Secondary Containment 3.6.4.1Dresden 2 and 33.6.4.1-2Amendment No. 253/246 SURVEILLANCE REQUIREMENTSSURVEILLANCEFREQUENCYSR 3.6.4.1.1Verify secondary containment vacuum is
!0.25inch of vacuum water gauge.
In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.2Verify one secondary containment access door in each access opening is closed, except when the access opening is being used for entry and exit.
In accordance
with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.3Verify the secondary containment can be maintained
!0.25inch of vacuum water gauge for 1hour using one SGT subsystem
at a flow rate 4000cfm.In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.4Verify all secondary containment equipment hatches are closed and sealed.
In accordance with the Surveillance
Frequency
Control Program
NOTE--------------------------------------
Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates
one standby gas treatment (SGT) subsystem is capable of
establishing the required secondary containment vacuum.
Secondary Containment 3.6.4.1LaSalle 1 and 23.6.4.1-3Amendment No. 222/208 SURVEILLANCE REQUIREMENTSSURVEILLANCEFREQUENCYSR 3.6.4.1.1Verify secondary containment vacuum is
!0.25inch of vacuum water gauge.
In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.2Verify one secondary containment access door in each access opening is closed, except when the access opening is being used for entry and exit.
In accordance
with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.3Verify the secondary containment can be drawn down to
!0.25inch of vacuum water gauge in 900seconds using one standby gas treatment (SGT) subsystem.
In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.4Verify the secondary containment can be maintained
!0.25 inch of vacuum water gauge for 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> using one SGT subsystem
at a flow rate 4400 cfm.In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.5Verify all secondary containment equipment hatches are closed and sealed.
In accordance with the Surveillance
Frequency
Control Program
NOTE--------------------------------------
Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates
one standby gas treatment (SGT) subsystem is capable of
establishing the required secondary containment vacuum.
DEFINITIONS PURGE - PURGING 1.31 PURGE or PURGING shall be the controlled process of discharging air or gas from a confinement to maintain temperature, pressure, humidity, concentration or other operating condition, in such a manner that
replacement air or gas is required to purify the confinement.
RATED THERMAL POWER 1.32 RATED THERMAL POWER shall be a total reactor core heat transfer rate to the reactor coolant of 3515 MWt.
REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY 1.33 REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY shall exist when:
- a. All reactor enclosure secondary containment penetrations required to be closed during accident conditions are either:
- 1. Capable of being closed by an OPERABLE secondary containment automatic isolation system, or
- 2. Closed by at least one manual valve, blind flange, slide gate damper, or deactivated automatic valve secured in its closed
position, except as provided by Specification 3.6.5.2.1.
- b. All reactor enclosure secondary containment hatches and blowout panels are closed and sealed.
- c. The standby gas treatment system is in compliance with the requirements of Specification 3.6.5.3.
- d. The reactor enclosure recirculation system is in compliance with the requirements of Specification 3.6.5.4.
- e. At least one door in each access to the reactor enclosure secondary containment is closed except when the access opening is being used for entry and exit.
- f. The sealing mechanism associated with each reactor enclosure secondary containment penetration, e.g., welds, bellows, or O-rings, is OPERABLE.
- g. The pressure within the reactor enclosure secondary containment is less than or equal to the value required by Specification
4.6.5.1.1a.
REACTOR PROTECTION SYSTEM RESPONSE TIME 1.34 REACTOR PROTECTION SYSTEM RESPONSE TIME shall be the time interval from when the monitored parameter exceeds its trip setpoint at the channel
sensor until de-energization of the scram pilot valve solenoids. The
response time may be measured by any series of sequential, overlapping
or total steps such that the entire response time is measured.
RECENTLY IRRADIATED FUEL 1.35 RECENTLY IRRADIATED FUEL is fuel that has occupied part of a critical reactor core within the previous 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
REFUELING FLOOR SECONDARY CONTAINMENT INTEGRITY 1.36 REFUELING FLOOR SECONDARY CONTAINMENT INTEGRITY shall exist when:
- a. All refueling floor secondary containment penetrations required to be closed during accident conditions are either:
LIMERICK - UNIT 1 1-6 Amendment No. 33,66,105,106,185,201, 220 , except as indicated by the footnote for Specification 4.6.5.1.1a.
DEFINITIONS REFUELING FLOOR SECONDARY CONTAINMENT INTEGRITY (Continued)
- 1. Capable of being closed by an OPERABLE secondary containment automatic isolation system, or
- 2. Closed by at least one manual valve, blind flange, slide gate damper, or deactivated automatic valve secured in its closed
position, except as provided by Specification 3.6.5.2.2.
- b. All refueling floor secondary containment hatches and blowout panels are closed and sealed.
- c. The standby gas treatment system is in compliance with the requirements of specification 3.6.5.3.
- d. At least one door in each access to the refueling floor secondary containment is closed except when the access opening is being used for entry and exit.
- e. The sealing mechanism associated with each refueling floor secondary containment penetration, e.g., welds, bellows, or O-rings, is OPERABLE.
- f. The pressure within the refueling floor secondary containment is less than or equal to the value required by Specification 4.6.5.1.2a.
REPORTABLE EVENT
1.37 A REPORTABLE EVENT shall be any of those conditions specified in Section 50.73 to 10 CFR Part 50.
RESTRICTED AREA
1.37a RESTRICTED AREA means an area, access to which is limited by the licensee for the purpose of protecting individuals against undue risks from exposure
to radiation and radioactive materials. RESTRICTED AREA does not include
areas used as residential quarters, but separate rooms in a residential
building may be set apart as a RESTRICTED AREA.
1.38 (Deleted)
1.39 SDM shall be the amount of reactivity by which the reactor is subcritical or would be subcritical throughout the operating cycle
assuming that:
a.The reactor is xenon free; b.The moderator temperature is 68°F, corresponding to the most reactive state; and c.All control rods are fully inserted except for the single control rod of highest reactivity worth, which is assumed to be fully
withdrawn. With control rods not capable of being fully inserted, the reactivity worth of these control rods must be accounted for
in the determination of SDM.
SITE BOUNDARY
1.40 The SITE BOUNDARY shall be that line as defined in Figure 5.1.3-1a.
SOURCE CHECK
1.41 A SOURCE CHECK shall be the qualitative assessment of channel response when the channel sensor is exposed to a radioactive source.
LIMERICK - UNIT 1 1-7 Amendment No. 48,66,105,185,187, 207,215, 220 , except as indicated by the footnote for Specification 4.6.5.1.2a.
CONTAINMENT SYSTEMS 3/4.6.5 SECONDARY CONTAINMENT REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY LIMITING CONDITION FOR OPERATION 3.6.5.1.1 REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY shall be maintained.
APPLICABILITY: OPERATIONAL CONDITIONS 1, 2, and 3.
ACTION: Without REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY, restore REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> or be in at least HOT SHUTDOWN within the next 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> and in COLD SHUTDOWN within the following 24
hours. SURVEILLANCE REQUIREMENTS 4.6.5.1.1 REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY shall be demon-strated by: a.Verifying in accordance with the Surveillance Frequency Control Program that the pressure within the reactor enclosure secondary containment is greater than or equal to 0.25 inch of vacuum water gauge.b.Verifying in accordance with the Surveillance Frequency Control Program that:1.All reactor enclosure secondary containment equipment hatches and blowout panels are closed and sealed.2.At least one door in each access to the reactor enclosure secondary containment is closed, except when the access opening is being used for entry and exit.3.All reactor enclosure secondary containment penetrations not capable of being closed by OPERABLE secondary containment auto-matic isolation dampers/valves and required to be closed during accident conditions are closed by valves, blind flanges, slide gate dampers or deactivated automatic dampers/valves secured in position.c.In accordance with the Surveillance Frequency Control Program:1.Verifying that one standby gas treatment subsystem will draw down the reactor enclosure secondary containment to greater than or
equal to 0.25 inch of vacuum water gauge in less than or equal to 916 seconds with the reactor enclosure recirc system in operation
and2.Operating one standby gas treatment subsystem for one hour and maintaining greater than or equal to 0.25 inch of vacuum water gauge in the reactor enclosure secondary containment at a flow rate not exceeding 2500 cfm with wind speeds of 7.0 mph as measured on the wind instrument on Tower 1, elevation 30' or, if that instrument is unavailable, Tower 2, elevation 159'.LIMERICK - UNIT 1 3/4 6-46 Amendment No. 8,71,106,122,186, 220
- Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates one standby gas treatment subsystem is capable of establishing the required secondary containment vacuum.
CONTAINMENT SYSTEMS 3/4.6.5 SECONDARY CONTAINMENT
REFUELING AREA SECONDARY CONTAINMENT INTEGRITY
LIMITING CONDITION FOR OPERATION 3.6.5.1.2 REFUELING AREA SECONDARY CONTAINMENT INTEGRITY shall be maintained.
APPLICABILITY: When RECENTLY IRRADIATED FUEL is being handled in the secondary containment, or during operations with a potential for draining the reactor vessel, with the vessel head removed and fuel in the vessel.
ACTION: Without REFUELING AREA SECONDARY CONTAINMENT INTEGRITY, suspend handling of RECENTLY
IRRADIATED FUEL in the secondary containment and operations with a potential for draining the reactor vessel. The provisions of Specification 3.0.3 are not applicable.
SURVEILLANCE REQUIREMENTS 4.6.5.1.2 REFUELING AREA SECONDARY CONTAINMENT INTEGRITY shall be demonstrated
by:
- a. Verifying in accordance with the Surveillance Frequency Control Program that the pressure within the refueling area secondary containment is
greater than or equal to 0.25 inch of vacuum water gauge.
- b. Verifying in accordance with the Surveillance Frequency Control Program that:
- 1. All refueling area secondary containment equipment hatches and blowout panels are closed and sealed.
- 2. At least one door in each access to the refueling area secondary containment is closed, except when the access opening is being used for entry and exit.
- 3. All refueling area secondary containment penetrations not capable of being closed by OPERABLE secondary containment automatic iso-
lation dampers/valves and required to be closed during accident
conditions are closed by valves, blind flanges, slide gate
dampers or deactivated automatic dampers/valves secured in
position.
- c. In accordance with the Surveillance Frequency Control Program:
Operating one standby gas treatment subsystem for one hour and main-taining greater than or equal to 0.25 inch of vacuum water gauge
in the refueling area secondary containment at a flow rate not exceeding
764 cfm.
LIMERICK - UNIT 1 3/4 6-47 Amendment No. 29,71,185,186, 220
- Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates one standby gas treatment subsystem is capable of establishing the required secondary containment vacuum.
DEFINITIONS PURGE - PURGING 1.31 PURGE or PURGING shall be the controlled process of discharging air or gas from a confinement to maintain temperature, pressure, humidity, concentration or other operating condition, in such a manner that
replacement air or gas is required to purify the confinement.
RATED THERMAL POWER 1.32 RATED THERMAL POWER shall be a total reactor core heat transfer rate to the reactor coolant of 3515 MWt.
REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY 1.33 REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY shall exist when:
- a. All reactor enclosure secondary containment penetrations required to be closed during accident conditions are either:
- 1. Capable of being closed by an OPERABLE secondary containment automatic isolation system, or
- 2. Closed by at least one manual valve, blind flange, slide gate damper or deactivated automatic valve secured in its closed
position, except as provided by Specification 3.6.5.2.1.
- b. All reactor enclosure secondary containment hatches and blowout panels are closed and sealed.
- c. The standby gas treatment system is in compliance with the requirements of Specification 3.6.5.3.
- d. The reactor enclosure recirculation system is in compliance with the requirements of Specification 3.6.5.4.
- e. At least one door in each access to the reactor enclosure secondary containment is closed, except when the access opening is being used for entry and exit.
- f. The sealing mechanism associated with each reactor enclosure secondary containment penetration, e.g., welds, bellows, or O-rings, is OPERABLE.
- g. The pressure within the reactor enclosure secondary containment is less than or equal to the value required by Specification 4.6.5.1.1a.
REACTOR PROTECTION SYSTEM RESPONSE TIME 1.34 REACTOR PROTECTION SYSTEM RESPONSE TIME shall be the time interval from when the monitored parameter exceeds its trip setpoint at the channel sensor until de-energization of the scram pilot valve solenoids. The response time may be measured by any series of sequential, overlapping
or total steps such that the entire response time is measured.
RECENTLY IRRADIATED FUEL 1.35 RECENTLY IRRADIATED FUEL is fuel that has occupied part of a critical reactor core within the previous 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
REFUELING FLOOR SECONDARY CONTAINMENT INTEGRITY 1.36 REFUELING FLOOR SECONDARY CONTAINMENT INTEGRITY shall exist when:
- a. All refueling floor secondary containment penetrations required to be closed during accident conditions are either:
LIMERICK - UNIT 2 1-6 Amendment No. 48,51,69,146,163, 182
, except as indicated by the footnote for Specification 4.6.5.1.1a.
DEFINITIONS REFUELING FLOOR SECONDARY CONTAINMENT INTEGRITY (Continued)
- 1. Capable of being closed by an OPERABLE secondary containment automatic isolation system, or
- 2. Closed by at least one manual valve, blind flange, slide gate damper or deactivated automatic valve secured in its closed
position, except as provided by Specification 3.6.5.2.2.
- b. All refueling floor secondary containment hatches and blowout panels are closed and sealed.
- c. The standby gas treatment system is in compliance with the requirements of Specification 3.6.5.3.
- d. At least one door in each access to the refueling floor secondary containment is closed, except when the access opening is being used for entry and exit.
- e. The sealing mechanism associated with each refueling floor secondary containment penetration, e.g., welds, bellows, or O-rings, is OPERABLE.
- f. The pressure within the refueling floor secondary containment is less than or equal to the value required by Specification 4.6.5.1.2a.
REPORTABLE EVENT
1.37 A REPORTABLE EVENT shall be any of those conditions specified in Section 50.73 to 10 CFR Part 50.
RESTRICTED AREA
1.37a RESTRICTED AREA means an area, access to which is limited by the licensee for the purpose of protecting individuals against undue risks from exposure to radiation
and radioactive materials. RESTRICTED AREA does not include areas used as
residential quarters, but separate rooms in a residential building may be set
apart as a RESTRICTED AREA.
1.38 (Deleted)
1.39 SDM shall be the amount of reactivity by which the reactor is subcritical or would be subcritical throughout the operating cycle assuming that:
a.The reactor is xenon free;
b.The moderator temperature is 68°F, corresponding to the most reactive state; and
c.All control rods are fully inserted except for the single control rod of highest reactivity worth, which is assumed to be fully withdrawn. With
control rods not capable of being fully inserted, the reactivity worth
of these control rods must be accounted for in the determination of SDM.
SITE BOUNDARY
1.40 The SITE BOUNDARY shall be that line as defined in Figure 5.1.3-1a.
SOURCE CHECK
1.41 A SOURCE CHECK shall be the qualitative assessment of channel response when the channel sensor is exposed to a radioactive source.
LIMERICK - UNIT 2 1-7 Amendment No. 11,48,69,146,148, 168,176, 182 , except as indicated by the footnote for Specification 4.6.5.1.2a.
CONTAINMENT SYSTEMS 3/4.6.5 SECONDARY CONTAINMENT
REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY
LIMITING CONDITION FOR OPERATION 3.6.5.1.1 REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY shall be maintained.
APPLICABILITY: OPERATIONAL CONDITIONS 1, 2, and 3.
ACTION: Without REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY, restore REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> or be in at least HOT SHUTDOWN within the next 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> and in COLD SHUTDOWN within the following 24
hours.
SURVEILLANCE REQUIREMENTS 4.6.5.1.1 REACTOR ENCLOSURE SECONDARY CONTAINMENT INTEGRITY shall be demon-
strated by:
- a. Verifying in accordance with the Surveillance Frequency Control Program that the pressure within the reactor enclosure secondary containment is greater than or equal to 0.25 inch of vacuum water
- b. Verifying in accordance with the Surveillance Frequency Control Program that:
- 1. All reactor enclosure secondary containment equipment hatches and blowout panels are closed and sealed.
- 2. At least one door in each access to the reactor enclosure secondary containment is closed, except when the access opening is being used for entry and exit.
- 3. All reactor enclosure secondary containment penetrations not capable of being closed by OPERABLE secondary containment auto-matic isolation dampers/valves and required to be closed during
accident conditions are closed by valves, blind flanges, slide gate dampers or deactivated automatic dampers/valves secured in position.
- c. In accordance with the Surveillance Frequency Control Program:
- 1. Verifying that one standby gas treatment subsystem will draw down the reactor enclosure secondary containment to greater than or equal to 0.25 inch of vacuum water gauge in less than or equal to
916 seconds with the reactor enclosure recirc system in operation, and 2. Operating one standby gas treatment subsystem for one hour and maintaining greater than or equal to 0.25 inch of vacuum water
gauge in the reactor enclosure secondary containment at a flow
rate not exceeding 2500 cfm with wind speeds of < 7.0 mph as measured on the wind instrument on Tower 1, elevation 30' or, if that instrument is unavailable, Tower 2, elevation 159'.
LIMERICK - UNIT 2 3/4 6-46 Amendment No. 34,51,86,147, 182
- Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates one standby gas treatment subsystem is capable of establishing the required secondary containment vacuum.
CONTAINMENT SYSTEMS 3/4.6.5 SECONDARY CONTAINMENT
REFUELING AREA SECONDARY CONTAINMENT INTEGRITY
LIMITING CONDITION FOR OPERATION 3.6.5.1.2 REFUELING AREA SECONDARY CONTAINMENT INTEGRITY shall be maintained.
APPLICABILITY: When RECENTLY IRRADIATED FUEL is being handled in the secondary containment, or during operations with a potential for draining the reactor vessel, with the vessel head removed and fuel in the vessel.
ACTION: Without REFUELING AREA SECONDARY CONTAINMENT INTEGRITY, suspend handling of RECENTLY IRRADIATED FUEL in the secondary containment, and operations with a potential for draining the reactor vessel. The provisions of Specifica-tion 3.0.3 are not applicable.
SURVEILLANCE REQUIREMENTS 4.6.5.1.2 REFUELING AREA SECONDARY CONTAINMENT INTEGRITY shall be demonstrated
by:
- a. Verifying in accordance with the Surveillance Frequency Control Program that the pressure within the refueling area secondary
containment is greater than or equal to 0.25 inch of vacuum water
gauge. b. Verifying in accordance with the Surveillance Frequency Control Program that:
- 1. All refueling area secondary containment equipment hatches and blowout panels are closed and sealed.
- 2. At least one door in each access to the refueling area secondary containment is closed, except when the access opening is being used for entry and exit.
- 3. All refueling area secondary containment penetrations not capable of being closed by OPERABLE secondary containment automatic iso-
lation dampers/valves and required to be closed during accident conditions are closed by valves, blind flanges, slide gate dampers or deactivated automatic dampers/valves secured in position.
- c. In accordance with the Surveillance Frequency Control Program:
Operating one standby gas treatment subsystem for one hour and main-taining greater than or equal to 0.25 inch of vacuum water gauge
in the refueling area secondary containment at a flow rate not exceeding
764 cfm.
LIMERICK - UNIT 2 3/4 6-47 Amendment No. 34,146,147, 182
- Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates one standby gas treatment subsystem is capable of establishing the required secondary containment vacuum.
Secondary Containment3.6.4.1NMP23.6.4.1-2Amendment91, 101,152ACTIONS (continued)CONDITIONREQUIRED ACTIONCOMPLETION TIMEC.Secondary containment inoperable during movement of recently irradiated fuel assemblies in the secondary containment or during OPDRVs.C.1-----------NOTE-----------LCO 3.0.3 is not applicable.------------------------------Suspend movement of recently irradiated fuel assemblies in the secondary containment.
ANDC.2Initiate action tosuspend OPDRVs.Immediately Immediately SURVEILLANCE REQUIREMENTSSURVEILLANCEFREQUENCYSR 3.6.4.1.1Verify secondary containment vacuum is0.25 inch of vacuum water gauge.In accordance with the Surveillance Frequency Control ProgramSR 3.6.4.1.2Verify all secondary containment equipment hatches are closed and sealed.In accordance with the Surveillance Frequency Control Program(continued)
NOTE--------------------------------------
Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates
one standby gas treatment (SGT) subsystem is capable of
establishing the required secondary containment vacuum.
Secondary Containment 3.6.4.1NMP23.6.4.1-3Amendment 91,152,157SURVEILLANCE REQUIREMENTS (continued)SURVEILLANCEFREQUENCYSR 3.6.4.1.3Verify one secondary containment access door in each access opening is closed, except when the access opening is being used for entry and exit.In accordance with the Surveillance Frequency Control ProgramSR 3.6.4.1.4Verify the secondary containment can bedrawn down to 0.25 inch of vacuumwater gauge in 66.7 seconds using one standby gas treatment (SGT) subsystem.In accordance with the Surveillance Frequency Control ProgramSR 3.6.4.1.5Verify the secondary containment can be maintained 0.25 inch of vacuum water gauge for 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> using one SGT subsystem at a flow rate 2670 cfm.In accordance with the Surveillance Frequency Control Program Secondary Containment 3.6.4.1Quad Cities 1 and 23.6.4.1-2Amendment No. 265/260 9 SURVEILLANCE REQUIREMENTSSURVEILLANCEFREQUENCYSR 3.6.4.1.1Verify secondary containment vacuum is
!0.10inch of vacuum water gauge.
In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.2Verify one secondary containment access door in each access opening is closed, except when the access opening is being used for entry and exit.
In accordance
with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.3Verify the secondary containment can be maintained
!0.25inch of vacuum water gauge for 1hour using one SGT subsystem
at a flow rate 4000cfm.In accordance with the Surveillance
Frequency
Control ProgramSR 3.6.4.1.4Verify all secondary containment equipment hatches are closed and sealed.
In accordance with the Surveillance
Frequency
Control Program
NOTE--------------------------------------
Not required to be met for 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if analysis demonstrates
one standby gas treatment (SGT) subsystem is capable of
establishing the required secondary containment vacuum.
ATTACHMENT 3 Markup of Proposed Technical Specifications Bases Pages (For Information Only)
Clinton Power Station, Unit 1 Facility Operating License No. NPF-62 Dresden Nuclear Power Station, Units 2 and 3 Renewed Facility Operating License Nos. DPR-19 and DPR-25 LaSalle County Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-11 and NPF-18 Limerick Generating Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-39 and NPF-85 Nine Mile Point Nuclear Station, Unit 2 Renewed Facility Operating License No. NPF-69 Quad Cities Nuclear Power Station, Units 1 and 2 Renewed Facility Operating License Nos. DPR-29 and DPR-30 REVISED TECHNICAL SPECIFICATIONS BASES PAGES Clinton Power Station, Unit 1 B 3.6-88
Limerick Generating Station, Unit 1 B 3/4 6-5a
Quad Cities Nuclear Power Station, Units 1 and 2 B 3.6.4.1-4 Dresden Nuclear Power Station, Units 2 and 3 B 3.6.4.1-4
Limerick Generating Station, Unit 2 B 3/4 6-5a LaSalle County Station, Units 1 and 2 B 3.6.4.1-4
Nine Mile Point Nuclear Station, Unit 2 B 3.6.4.1-4 Secondary Containment B 3.6.4.1 BASESCLINTONB 3.6-88Revision No. 14-2ACTIONSC.1 and C.2(continued) movement of recently irradiated fuel assemblies would not be a sufficient reason to require a reactor shutdown.SURVEILLANCESR 3.6.4.1.1 REQUIREMENTS This SR ensures that the secondary containment boundary is
sufficiently leak tight to preclude exfiltration under
expected wind conditions. The Surveillance Frequency is controlled under the Surveillance Frequency Control Program.
With regard to secondary containment vacuum values obtained
pursuant to this SR, as read from plant indication
instrumentation, the specified limit is considered to be a
nominal value and therefore does not require compensation
for instrument indication uncertainties (Ref. 4).
SR 3.6.4.1.2 and SR 3.6.4.1.3Verifying thatsecondary containment equipment hatches and access doors are closed ensures that the infiltration of
outside air of such a magnitude as to prevent maintaining
the desired negative pressure does not occur. Verifying that all such openings are closed provides adequate
assurance that exfiltration from the secondary containment
will not occur. In this application the term "sealed" has
no connotation of leak tightness. Maintaining secondary
containment OPERABILITY requires verifying one door in the
access opening is closed, except when the access opening is being used for entry and exit. The Surveillance Frequency is controlled under the Surveillance Frequency Control Program.(continued)
The SR is modified by a Note which states the SR is not required to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that one SGT subsystem remains capable of establishing the required secondary containment
vacuum. Use of the Note is expected to be infrequent but may be necessitated by situations in which
secondary containment vacuum may be less than the required containment vacuum, such as, but not limited
to, wind gusts or failure or change of operating normal ventilation subsystems. These conditions do not
indicate any change in the leak tightness of the secondary containment boundary. The analysis should
consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind
conditions, measured secondary containment vacuum, etc.) to determine whether, if an accident requiring
secondary containment to be OPERABLE were to occur, one train of SGT could establish the assumed
secondary containment vacuum within the time assumed in the accident analysis. If so, the SR may be
considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4 hour4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> limit is based on the expected short duration of the
situations when the Note would be applied.
Secondary Containment B 3.6.4.1Dresden 2 and 3B 3.6.4.1-4Revision 55 BASESACTIONSC.1 and C.2 (continued)
Movement of recently irradiated fuel assemblies in the
secondary containment and OPDRVs can be postulated to cause
significant fission product release to the secondary
containment. In such cases, the secondary containment is
the only barrier to release of fission products to the
environment. Therefore, movement of recently irradiated fuel assemblies must be immediately suspended if the
secondary containment is inoperable.
Suspension of this activity shall not preclude completing an action that involves moving a component to a safe position.
Also, action must be immediately initiated to suspend OPDRVs to minimize the probability of a vessel draindown and
subsequent potential for fission product release. Actions
must continue until OPDRVs are suspended.Required ActionC.1 has been modified by a Note stating thatLCO3.0.3 is not applicable. If moving recently irradiated fuel assemblies while in MODE4 or5, LCO3.0.3 would not
specify any action. If moving recently irradiated fuel assemblies while in MODE1, 2, or3, the fuel movement is
independent of reactor operations. Therefore, in either case, inability to suspend movement of recently irradiated
fuel assemblies would not be a sufficient reason to require
a reactor shutdown.SURVEILLANCESR 3.6.4.1.1 REQUIREMENTS This SR ensures that the secondary containment boundary is sufficiently leak tight to preclude exfiltration under expected wind conditions. The Surveillance Frequency is controlled under the Surveillance Frequency Control Program.(continued)
The SR is modified by a Note which states the SR is not required to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that o ne SGT subsystem remains capable of establishing the required secondary containment vacuum. Use of the Note is expected to be
infrequent but may be necessitated by situations in which secondary containment vacuum may be less than the required
containment vacuum, such as, but not limited to, wind gusts or failure or change of operating normal ventilation subsystems.
These conditions do not indicate any change in the leak tightness of the secondary containment boundary. The analysis should
consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind conditions, measured
secondary containment vacuum, etc.) to determine whether, if an accident requiring secondary containment to be OPERABLE
were to occur, one train of SGT could establish the assumed secondary containment vacuum within the time assumed in the
accident analysis. If so, the SR may be considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4 hour4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> limit is based on the expected short duration of the situations when the Note would be applied.
Secondary Containment B 3.6.4.1LaSalle 1 and2B 3.6.4.1-4Revision 68 BASESACTIONSC.1, C.2, and C.3 (continued)Required ActionC.1 has been modified by a Note stating thatLCO3.0.3 is not applicable. If moving irradiated fuel assemblies while in MODE4 or5, LCO3.0.3 would not specify
any action. If moving irradiated fuel assemblies while in MODE1, 2, or3, the fuel movement is independent of reactor
operations. Therefore, in either case, inability to suspend
movement of irradiated fuel assemblies would not be a
sufficient reason to require a reactor shutdown.SURVEILLANCESR 3.6.4.1.1 REQUIREMENTS This SR ensures that the secondary containment boundary is sufficiently leak tight to preclude exfiltration. The
Surveillance Frequency is controlled under the Surveillance
Frequency Control Program.
SR 3.6.4.1.2 Verifying that one secondary containment access door in eachaccess opening is closed provides adequate assurance that exfiltration from the secondary containment will not occur.
An access opening contains at least one inner and one outer door. In some cases a secondary containment barrier contains multiple inner or multiple outer doors. For these
cases, the access openings share the inner door or the outer door, i.e., the access openings have a common inner door or
outer door. The intent is to not breach the secondary containment, whichis achieved by maintaining the inner or outer portion of the barrier closed except when the access opening is being used for entry and exit; i.e., all inner doors closed or all outer doors closed. Thus each access openinghas one door closed. The Surveillance Frequency is controlled under the Surveillance Frequency Control Program.(continued)
The SR is modified by a Note which states the SR is not required to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that o ne SGT subsystem remains capable of establishing the required secondary containment vacuum. Use of the Note is expected to be
infrequent but may be necessitated by situations in which secondary containment vacuum may be less than the required
containment vacuum, such as, but not limited to, wind gusts or failure or change of operating normal ventilation subsystems.
These conditions do not indicate any change in the leak tightness of the secondary containment boundary. The analysis should
consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind conditions, measured
secondary containment vacuum, etc.) to determine whether, if an accident requiring secondary containment to be OPERABLE
were to occur, one train of SGT could establish the assumed secondary containment vacuum within the time assumed in the
accident analysis. If so, the SR may be considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4 hour4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> limit is based on the expected short duration of the situations when the Note would be applied.
CONTAINMENT SYSTEMS BASES SECONDARY CONTAINMENT (Continued)
Surveillances 4.6.5.1.1.b.2 and 4.6.5.1.2.b.2 require verifying that one secondary containment personnel access door in each access opening is closed which provides adequate assurance that exfiltration from the secondary containment will not occur. An access opening contains at least one inner and one outer door. The intent is to not breach the secondary containment, which is achieved by maintaining the inner or outer personnel access door closed.
Surveillances 4.6.5.1.1.b.2 and 4.6.5.1.2.b.2 provide an allowance for brief, inadvertent, simultaneous openings of redundant secondary containment personnel access doors for normal entry and exit conditions.
Although the safety analyses assumes that the reactor enclosure secondary containment draw down time will take 930 seconds, these surveillance require-
ments specify a draw down time of 916 seconds. This 14 second difference is
due to the diesel generator starting and sequence loading delays which is not
part of this surveillance requirement.
The reactor enclosure secondary containment draw down time analyses assumes a starting point of 0.25 inch of vacuum water gauge and worst case SGTS dirty
filter flow rate of 2800 cfm. The surveillance requirements satisfy this as-
sumption by starting the drawdown from ambient conditions and connecting the
adjacent reactor enclosure and refueling area to the SGTS to split the exhaust
flow between the three zones and verifying a minimum flow rate of 2800 cfm from
the test zone. This simulates the worst case flow alignment and verifies ade-quate flow is available to drawdown the test zone within the required time.
The Technical Specification Surveillance Requirement 4.6.5.3.b.3 is intended
to be a multi-zone air balance verification without isolating any test zone.
The SGTS fans are sized for three zones and therefore, when aligned to a single zone or two zones, will have excess capacity to more quickly drawdown
the affected zones. There is no maximum flow limit to individual zones or
pairs of zones and the air balance and drawdown time are verified when all
three zones are connected to the SGTS.
The three zone air balance verification and drawdown test will be done after any major system alteration, which is any modification which will have
an effect on the SGTS flowrate such that the ability of the SGTS to drawdown
the reactor enclosure to greater than or equal to 0.25 inch of vacuum water
gage in less than or equal to 916 seconds could be affected. LIMERICK - UNIT 1 B 3/4 6-5a Amendment No. 6,40,71,106,122, 185,186, ECR LG 09-00052, Associated with Amendment Surveillances 4.6.5.1.1.a and 4.6.5.1.2.a are each modified by a footnote (*) which states the surveillance is not re quired to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that one standby gas treatment subsystem remains capable of establishing the
required secondary containment vacuum. Use of the footnote is expected to be infrequent but may be necessitated by situations
in which secondary containment vacuum may be less than the required containment vacuum, such as, but not limited to, wind
gusts or failure or change of operating normal ventilation subsystems. These conditions do not indicate any change in the leak tightness of the secondary containment boundary. The analysis should consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind conditions, measured secondary containment vacuum, etc.) to determine whether, if an
accident requiring secondary containment to be OPERABLE were to occur, one train of standby gas treatment could establish the
assumed secondary containment vacuum within the time assumed in the accident analysis. If so, the surveillance may be
considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4-hour limit is based on the expected short duration of the situations when the footnote would be applied.
CONTAINMENT SYSTEMS BASES SECONDARY CONTAINMENT (Continued)
Surveillances 4.6.5.1.1.b.2 and 4.6.5.1.2.b.2 require verifying that one secondary containment personnel access door in each access opening is closed which provides adequate assurance that exfiltration from the secondary containment will not occur. An access opening contains at least one inner and one outer door. The intent is to not breach the secondary containment, which is achieved by maintaining the inner or outer personnel access door closed. Surveillances 4.6.5.1.1.b.2 and 4.6.5.1.2.b.2 provide an allowance for brief, inadvertent, simultaneous openings of redundant secondary containment personnel access doors for normal entry and exit conditions.
Although the safety analyses assumes that the reactor enclosure secondary containment draw down time will take 930 seconds, these surveillance require-
ments specify a draw down time of 916 seconds. This 14 second difference is
due to the diesel generator starting and sequence loading delays which is not
part of this surveillance requirement.
The reactor enclosure secondary containment draw down time analyses assumes a starting point of 0.25 inch of vacuum water gauge and worst case SGTS dirty
filter flow rate of 2800 cfm. The surveillance requirements satisfy this as-
sumption by starting the drawdown from ambient conditions and connecting the
adjacent reactor enclosure and refueling area to the SGTS to split the exhaust
flow between the three zones and verifying a minimum flow rate of 2800 cfm from
the test zone. This simulates the worst case flow alignment and verifies ade-
quate flow is available to drawdown the test zone within the required time.
The Technical Specification Surveillance Requirement 4.6.5.3.b.3 is intended
to be a multi-zone air balance verification without isolating any test zone.
The SGTS is common to Unit 1 and 2 and consists of two independent subsystems. The power supplies for the common portions of the subsystems are
from Unit 1 safeguard busses, therefore the inoperability of these Unit 1
supplies are addressed in the SGTS ACTION statements in order to ensure adequate
onsite power sources to SGTS for its Unit 2 function during a loss of offsite
power event. The allowable out of service times are consistent with those in
the Unit 1 Technical Specifications for SGTS and AC electrical power supply out
of service condition combinations. LIMERICK - UNIT 2 B 3/4 6-5a Amendment No. 34,51,86,146,147, ECR LG 09-00052, Associated with Amendment Surveillances 4.6.5.1.1.a and 4.6.5.1.2.a are each modified by a footnote (*) which states the surveillance is not re quired to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that one standby gas treatment subsystem remains capable of establishing the
required secondary containment vacuum. Use of the footnote is expected to be infrequent but may be necessitated by situations
in which secondary containment vacuum may be less than the required containment vacuum, such as, but not limited to, wind
gusts or failure or change of operating normal ventilation subsystems. These conditions do not indicate any change in the leak tightness of the secondary containment boundary. The analysis should consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind conditions, measured secondary containment vacuum, etc.) to determine whether, if an
accident requiring secondary containment to be OPERABLE were to occur, one train of standby gas treatment could establish the
assumed secondary containment vacuum within the time assumed in the accident analysis. If so, the surveillance may be
considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4-hour limit is based on the expected short duration of the situations when the footnote would be applied.
Secondary ContainmentB3.6.4.1NMP2B 3.6.4.1-4Revision 0, 5,44 (A152),46(A157)
BASESACTIONSC.1 and C.2 (continued) reactor operations. Therefore, in either case, inability to suspend movement of recently irradiated fuel assemblies would not be a sufficient reason to require a reactor shutdown.SURVEILLANCESR 3.6.4.1.1REQUIREMENTSThis SR ensures that the secondary containment boundary is sufficiently leak tight to preclude exfiltration. The Surveillance Frequency is controlled under the Surveillance Frequency Control Program.SR 3.6.4.1.2Verifying that secondarycontainment equipment hatches are closed ensures that the infiltrationof outside air of such magnitude as to prevent maintaining the desirednegative pressure does not occurandprovides adequate assurance thatexfiltration from the secondary containment will not occur. Inthisapplication, the term "sealed" has no connotation of leak tightness. The Surveillance Frequency is controlled under the Surveillance FrequencyControl Program.SR 3.6.4.1.3Verifyingthat one secondary containment access door in each opening isclosed provides adequate assurance that exfiltration from the secondary containment will not occur. An access opening contains at least one inner and one outer door. The intent is to not breach the secondary containment, which is achieved by maintaining the inner or outer portion of the barrier closed except when the access opening is being used for entry and exit.The Surveillance Frequency is controlled underthe Surveillance Frequency Control Program.(continued)
The SR is modified by a Note which states the SR is not required to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that o ne SGT subsystem remains capable of establishing the required secondary containment vacuum. Use of the Note is expected to be
infrequent but may be necessitated by situations in which secondary containment vacuum may be less than the required
containment vacuum, such as, but not limited to, wind gusts or failure or change of operating normal ventilation subsystems.
These conditions do not indicate any change in the leak tightness of the secondary containment boundary. The analysis should
consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind conditions, measured
secondary containment vacuum, etc.) to determine whether, if an accident requiring secondary containment to be OPERABLE
were to occur, one train of SGT could establish the assumed secondary containment vacuum within the time assumed in the
accident analysis. If so, the SR may be considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4 hour4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> limit is based on the expected short duration of the situations when the Note would be applied.
Secondary Containment B 3.6.4.1Quad Cities 1 and 2B 3.6.4.1-4Revision 43 BASES ACTIONSC.1 and C.2 (continued)
Movement of recently irradiated fuel assemblies in the
secondary containment and OPDRVs can be postulated to cause
significant fission product release to the secondary
containment. In such cases, the secondary containment is
the only barrier to release of fission products to the
environment. Therefore, movement of recently irradiated fuel assemblies must be immediately suspended if the
secondary containment is inoperable.
Suspension of this activity shall not preclude completing an action that involves moving a component to a safe position.
Also, action must be immediately initiated to suspend OPDRVs to minimize the probability of a vessel draindown and
subsequent potential for fission product release. Actions
must continue until OPDRVs are suspended.Required ActionC.1 has been modified by a Note stating thatLCO3.0.3 is not applicable. If moving recently irradiated fuel assemblies while in MODE4 or5, LCO3.0.3 would not
specify any action. If moving recently irradiated fuel assemblies while in MODE1, 2, or3, the fuel movement is
independent of reactor operations. Therefore, in either case, inability to suspend movement of recently irradiated
fuel assemblies would not be a sufficient reason to require
a reactor shutdown.SURVEILLANCESR 3.6.4.1.1 REQUIREMENTS This SR ensures that the secondary containment boundary is
sufficiently leak tight to preclude exfiltration under expected wind conditions. The Surveillance Frequency is controlled under the Surveillance Frequency Control Program.(continued)
The SR is modified by a Note which states the SR is not required to be met for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> if an analysis demonstrates that o ne SGT subsystem remains capable of establishing the required secondary containment vacuum. Use of the Note is expected to be
infrequent but may be necessitated by situations in which secondary containment vacuum may be less than the required
containment vacuum, such as, but not limited to, wind gusts or failure or change of operating normal ventilation subsystems.
These conditions do not indicate any change in the leak tightness of the secondary containment boundary. The analysis should
consider the actual conditions (equipment configuration, temperature, atmospheric pressure, wind conditions, measured
secondary containment vacuum, etc.) to determine whether, if an accident requiring secondary containment to be OPERABLE
were to occur, one train of SGT could establish the assumed secondary containment vacuum within the time assumed in the
accident analysis. If so, the SR may be considered met for a period up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. The 4 hour4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> limit is based on the expected short duration of the situations when the Note would be applied.